1500 r.p.m.50 Hz.

231/400 VAC

Power Output Ratings 50 Hz. / 400 V

Standby Power (ESP) kVA 125
Standby Power (ESP)
Standby power is defined as the maximum power kW 100
available during a variable electrical power kVA 113
sequence, under the stated operating conditions, Prime Power (PRP)
kW 90,4
for which a generating set is capable ofdelivering in
theevent of a utility power outage orunder test
conditions for up to 500 hours of operation per year
under average of 70% load.Overloading is not Engine
permissible Manufacturer RICARDO
Prime Power (PRP) Model R6105ZDS
Prime power is defined as being the maximum No of Cylinder / Configuration 6 IN-LINE
power which a generating set is capable of Displacement lt lt 6,49
delivering continuously whilst supplying a variable Bore / Stroke mm 105x125
electrical load. Average load should be 70%. The
Compression Ratio
generator can be overloaded 10% for 1 hour per 12
Aspiration Turbo charged intercooled
hours.
Governor Type MECHANIC
Cooling System WATER
Coolant Capacity lt 20
Lubrication Oil Capacity lt 15
Electrical System VDC 24
Speed / Frequency rpm 1500 rpm / 50 Hz
Engine Stand-By Power (with fan) kWm 100
Fuel Consumption 100% 24
Radiator Cooling Air m³/min 582
Air Intake-Engine m³/min 309
Exhaust Gas Flow m³/min 113
Exhaust Gas Temparature °C

Alternator
Manufacturer KWISE
Model S274G90B2
Power Factor 0,8
No of Bearing SINGLE
No of Poles 4
No of Leads 12
Voltage Regulation ( Steady State) ± %0,5
Insulation H
Degree of Protection IP23
Excitation System AVR, BRUSHLESS
Connection Type STAR
Total Harmonic Content (No Load) < %2
Frequency Hz 50
Voltage Output VAC 231/400

DIMENSION
Technical information and values are according to L x W x H (mm) Weight (kg) Fuel Tank (lt)
ISO8528, ISO3046,NEMA MG1.22, IEC 600341, BS
Canopied 3000 x 1100 x 1850 1550 250
49995000, VDE 0530 standards. Producing with
Open Skid 2400x 1100 x 1600 1110 250
ISO9001, CE standards.

All information given in this leaflet is intended for

general purposes only. Due to a policy continuous
improvement REAL reserves the right to amend
details and specifications without notice and all
information given is subject to the REAL's current
condition of sales.

ISO 9001:2000

www.thepwrhouse.net
1500
231/400
d/dak.50
VAC
 1500
231/400
d/dak.50
VAC
1500 r.p.m.50 Hz.

231/400 VAC

DESIGN SPECIFICATIONS

High quality, reliable and complate power unit,Compact design,Easy start and maintenance possibility,Every generating set is subjected to a comprehensive test programme which includes full load
testing and checking and providing of all control and safety shut down functions testing,Full engineered with a wide range of options and accessories:Canopy,soundproof and on road trailer

STANDARD GENSET SPECIFICATIONS

ENGINE
RICARDO heavy duty diesel engine,Four cycle, water cooled, turbo charged and after cooled,Electronic Governor Control System,Direct injection fuel,4 valves per cylindersystem,Replaceable wet type
cylinder liners,24 V D.C. starter and charge alternator,Replaceable fuel filter ,oil filter and dry element air filter,Cooling radiator and fan,Starter battery(with lead acid) including Rack and Cables,Flexible
fuel connection hoses and manual oil sump drain pump,Industrial capacity exhaust silencer and steel bellows,Jacket water heater (at automatic models),Operation manuals and circuit diagram
documents

ALTERNATOR
Brushless, single bearing system, 4 poles,Insulation class H,Standard degree of protection IP21 or IP23,Self-exciting and self-regulating,Stator winding with 2/3 pitch,Impregnation with tropicalised epoxy
varnish,Solid state Automatic Voltage Regulator

BASE FRAME
The complete genset is mounted as whole on a heavy-duty fabricated, steel base frame. Antivibration pads are fixed between the engine/ alternator feet and the base frame.Base frame design
incorporates an integral fuel tank.The generating set can be lifted or carefully pushed / pulled by the base frame,Lifting eyes allow easy transportation by a crain

CANOPY
All canopy parts are designed with modular principles
Without welding assembly
All metal canopy parts are painted by electrostatic polyester powder paint. NOISE LEVEL 73 dBA @ 7 mt
Exhaust silencer is protected against environment influences
Thermally insulated engine exhaust system
Emergency stop push button is installed outside of canopy
To enable for lifting easy mainteneance and operation

CONTROL SYSTEM

Panel Equipments;

Control, supervision and protection panel is mounted on the genset base frame.
The control panel is equipped as follows:

1-Auto. Mains Failure Control Panel

Control Panel Equipments:

Conrtol panel with TPH 309 module
Static battery charger Automatic shutdown on fault conditions
Emergency stop push button
Under/Over Speed
1.1 Generating Set control module TPH 309 features: High Engine Temperature
The module is used to monitor a mains supply and automatic start a stand-by generating set. Low Oil Pressure
Micro-processor based design Under/over generator volts
Monitors engine performance and AC power output Under/over generator frequency
LED and LCD alarm indication under/over mains frequency
Front panel configuration of timers and alarm trip points under/over mains voltage
provides signal to change over switch panel Low/High battery volts
event logging of shutdown alarms Fail to start
Remote communication via RS232 port or RS485 modbus output Fail to stop
easy push button control Charge fail
STOP/RESET-MANUAL-AUTO-TEST-START Over current
Operation indicators accesed by the LCD display scroll push button. Emergency stop
CAN data fail
Metering via LCD Display: CAN ECU fail

Generator Volts (L-L/L-N) LED indications

Generator Amps (L1-L2-L3)
Generator Frequency (Hz) Mains available
Engine hours run Generator available
Engine oil pressure (PSI&Bar) Mains on load
Engine speed RPM Generator on Load
Engine temperature (C & F)
Generator kVA
Generator kW
Generator power factor
2. Power Outlet Terminal Board Mounted on the Genset Baseframe
Mains Frequency (Hz)
Mains Volts (F-F/F-N)
Plant battery volts

ISO 9001:2000

www.thepwrhouse.net