Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Barionet 50

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

BARIONET

50

Low Cost IP Automation


Controller with Modbus/TCP
and SNMP Support

10/100 Mbit Ethernet connection, Barix AG


Seefeldstrasse 303
RS-232 and RS-485 serial interfaces, 4 dry contact inputs, CH-8008 Zürich
4 relays (30 V, 0.5 A), universal Dallas 1-Wire® interface, Switzerland
T +41 43 433 22 11
Bus extension connector for additional I/O devices F +41 44 274 28 49

Barix Technology Inc.


Low power (4 Watt max.), reliable system architecture 2182 Helena Road
St. Paul, MN 55128
USA
Supports TCP/IP protocol suite, integrated webserver/client, T (866) 815-0866
application protocols Modbus/TCP, SNMP, etc. F (209) 755-8435

www.barix.com
User programmable info@barix.com

© Barix AG 2010, all rights reserved. All information is subject to change


without notice. All mentioned trademarks belong to their respective owners
and are used for reference only. Product sheet V3.0
Technical Specifications Overview

I/O Interfaces: Barionet 50 is a fully programmable network controller for interfacing


On detachable screw terminal blocks: devices to open, IP-based networks. With the Barionet 50 contact
4 relay outputs (30 VDC, 0.5 A) closures and devices with serial ports can be network-enabled and easily
4 digital inputs (dry contacts) controlled via web browser and standards-based automation systems.
Dallas 1-Wire® interface
Barionet 50 is a modular component that operates either stand-alone or
Serial Interfaces: with other units, web servers and control systems, thus capable of building
RS-232 (DSub-9 male, 5-wire RXD, TXD, RTS, CTS, large, intelligent, distributed systems for a wide variety of commercial
GND), RS-485 on detachable screw terminal block control, monitoring, and home automation applications.
as well as on 4 pin extension connector,
both with serial speeds from 300 bps to 230 kbps Four logical inputs and four relays interface to contact closures.
(asynchronous) An expansion port connects to up to 32 Barix Modbus modules.
A Dallas 1-Wire® interface supports up to 50 digital temperature sensors
Network Interface: or can be programmed in BCL to support any other 1-Wire® device.
RJ45 10/100 Mbit Ethernet (Autodetect) Two asynchronous serial interfaces (1xRS-232, 1xRS-422/485) allow for the
connection of a wide range of additional I/O modules and smart sensors
Supported protocols: from various manufacturers. The serial ports can also be used indepen-
TCP/IP, UDP, ICMP, IGMP, AutoIP, IPzator™, dently for tunneling applications.
DHCP, CGI, HTTP web server for control, status
and configuration. LAN / WAN

BARIONET 50
API:
PC
Modbus/TCP, SNMP, CGI, UDP/TCP based ASCII Blind Water Temp. Hum. Current Dimmer
protocol
Common Applications
Misc: • Monitoring, controlling, and interfacing devices to IP-based networks
8 LED status indicators or central management systems in commercial, industrial, and home
Extension connector (4 pin: power and RS-485) applications
• Access control, machine data collection, and environmental monitoring
Power input: • Monitoring contact closures
9..30 VDC, 4 Watt max. • Temperature sensing and logging
• Intelligent 1-Wire® interface
Case:
high quality plastic, 135 g,, DIN-rail mount. The Barionet 50 firmware provides fully documented interfaces, which
4.13" x 3.34" x 1.25", 105 mm x 85 mm x 31 mm support a variety of different communication methods:
UDP and TCP, as well as higher-level protocols such as CGI, XML, and
Reliability,environmental conditions: Modbus/TCP and SNMP (private MIB included in device).
MTBF: Min. 233’000h acc. to MIL217F at 24 VDC
supply and 40°C ambient temperature The unit is programmable for stand-alone or connected operation in a
Operating temp.:0 to +50°C / 32 to 104°F, powerful control language, enhanced with advanced functions for network
storage temp.: 0 to +70°C / 32 to 158°F, communications. The language syntax is very similar to the well known
both 0 - 70% relative humidity, non-condensing Basic language, so most programmers can instantly craft interface
solutions. The built-in web server can serve user specific pages, which
Certifications: can contain data generated by the control program or the various inputs.
FCC A, CE A, RoHS compliant (lead free)
For further information, distribution partners, detailed technical
specifications and information about other versions and products please
visit www.barix.com

You might also like