PRIMAL™ CM-330: Technical Data Sheet For Europe, Middle East and Africa

Technical Data Sheet
for Europe, Middle East and Africa
PRIMAL™ CM-330
Acrylic Emulsion Polymer
Product PRIMAL™ CM-330 Acrylic Emulsion Polymer is an APEO and ammonia* free
acrylic emulsion polymer, specifically designed to modify cement compositions.
Description *APEO and Ammonia are not intentionally added and are not knowingly introduced from
other raw material.
Application PRIMAL™ CM-330 Acrylic Emulsion Polymer is designed for modification of

cement in a wide range of applications such as industrial cement floors, patching
and resurfacing, floor underlay, terrazzo flooring, spray and fill coats, pre-cast
architectural building panels, cement slurries and highway and bridge deck repair.
PRIMAL CM-330 Acrylic Emulsion Polymer has a remarkablestability against
cement and provides enhanced adhesion to various substrates such as concrete,
masonry, brick, wood, metals, and others. Cement modified with PRIMAL CM-330
Acrylic Emulsion Polymer shows enhanced flexural and impact strength, as well
as remarkable abrasion resistance compared to unmodified cement. Cement
mortars prepared with PRIMAL CM-330 Acrylic Emulsion Polymer are resistant to
many industrial chemicals and have remarkable resistance to ultraviolet light and
heat.
Typical Properties1)
Appearance Milky white liquid
MFFT 10 °C
Solids content 46.5 … 47.5 %
pH 9.5 … 10.5
Density 1.06 g/cm3

Viscosity (Brookfield LV, spindle 2
20 … 100 mPa·s
@ 60 rpm, 25°C)
1) Please note that the values shown are typical values for your guidance. They are not
to be taken as specifications and are subject to certain variability. Please consult the
sales specifications for details.
Formulation Defoamer: Efficient defoamers in combination with PRIMAL™ CM-330 Acrylic

Emulsion Polymer are Tego LAE-511, BYK-037 or Dehydran P-3215 at a 0.5%
Guidelines level on emulsion:
Coalescent: When working at temperatures down to 5°C addition of a coalescent
is recommended. One of the following coalescent could be used up to a 5% level
on emulsion: Texanol, DOWANOL™ DPnB product (Di propylene glycol n-butyl
ether) or BUTYL CARBITOL™ product.
® ™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow Form No 840-47701
PRIMALTM CM-330 Acrylic Emulsion Polymer
Review date 08/2012
Page 1 of 3
Health and Safety Safety Data Sheets (SDS) are available from The Dow Chemical Company. SDS
Considerations are provided to help customers satisfy their own handling, safety and disposal
needs and those that may be required by locally applicable health and safety
regulations. SDS are updated regularly, therefore, please request and review the
most current SDS before handling or using any product. For further questions
consult your Dow contact person.
PRIMAL™ CM-330 Acrylic Emulsion Polymer should be stored at temperatures

Storage and between 5°C and 40°C in tightly sealed containers. Avoid freezing of the material!
Handling Local legislation on storage must be followed.
PRIMAL CM-330 Acrylic Emulsion Polymer is protected against microbial attack
during transportation and storage in not opened original packaging. To avoid
problems with microbial attack during processing and in opened packaging
attention should be paid on hygiene. In some cases it could make sense to add
biocides to avoid problems with microorganisms.
We recommend using the product under safety precautions as described in the
SDS. Avoid contact with eyes and skin. Large quantities should be handled in a
correctly ventilated area. Material can create slippery conditions.
As the product contains water corrosion-resistance equipment should be used for
processing. Low shear pumps like diaphragm pumps should be used.
Product Dow has a fundamental concern for all who make, distribute and use its products,
and for the environment in which we live. This concern is the basis for our Product
Stewardship Stewardship philosophy by which we assess the safety, health, and environmental
information on our products and then take appropriate steps to protect employee
and public health and our environment. The success of our Product Stewardship
SURJUDPUHVWVZLWKHDFKDQGHYHU\LQGLYLGXDOLQYROYHGZLWK'RZSURGXFWVņIURP
the initial concept and research, to manufacture, use, sale, disposal, and recycle
of each product.
Dow strongly encourages its customers to review both their manufacturing

Customer Notice processes and their applications of Dow products from the standpoint of human
health and environmental quality to ensure that Dow products are not used in
ways for which they are not intended or tested. Dow personnel are available to
answer your questions and to provide reasonable technical support. Dow product
literature, including safety data sheets, should be consulted prior to use of Dow
products. Current safety data sheets are available from Dow
Review date 08/2012
Page 2 of 3
Additional For more information you may call the following numbers:
Information Europe*) +800-3-694-6367 (toll free)
Italy 800-783-825 (toll free, national)
Europe, Middle East, Africa +31-11567-2626 (toll call)
South Africa +800-99-5078 (toll free, national)
*) International toll free from Austria, Belgium, Denmark, Finland (prefix 990),
France, Germany, Hungary, Ireland, The Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland, and the United Kingdom.
NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may
differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this
document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable
laws and other government enactments. The product shown in this literature may not be available for sale and/or available in all geographies
where Dow is represented. The claims made may not have been approved for use in all countries. Dow assumes no obligation or liability for the
information in this document. References to “Dow” or the “Company” mean the Dow legal entity selling the products to Customer unless otherwise
expressly noted. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE EXPRESSLY EXCLUDED.
DISTRIBUIDO POR:
Review date 08/2012
Page 3 of 3

PRIMAL™ CM-330: Technical Data Sheet For Europe, Middle East and Africa

Uploaded by

Copyright:

Available Formats

PRIMAL™ CM-330: Technical Data Sheet For Europe, Middle East and Africa

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PRIMAL™ CM-330: Technical Data Sheet For Europe, Middle East and Africa

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

for Europe, Middle East and Africa

Application PRIMAL™ CM-330 Acrylic Emulsion Polymer is designed for modification of

Density 1.06 g/cm3

Formulation Defoamer: Efficient defoamers in combination with PRIMAL™ CM-330 Acrylic

PRIMAL™ CM-330 Acrylic Emulsion Polymer should be stored at temperatures

Dow strongly encourages its customers to review both their manufacturing

You might also like