Nelson Science Perspectives 10

Grade 10 Author Team Senior Program Consultant
Christine Adam-Carr Maurice DiGiuseppe, Ph.D.

Ottawa Catholic School Board University of Ontario Institute
of Technology (UOIT)
Martin Gabber
Formerly of Toronto Catholic
Formerly of Durham District
District School Board
School Board
Program Consultants
Christy Hayhoe
Douglas Fraser
Science Writer and Editor
District School Board
Douglas Hayhoe, Ph.D. Ontario North East
Department of Education,
Martin Gabber
Tyndale University College
Formerly of Durham District
Katharine Hayhoe, B.Sc., M.S., School Board
Professor, Department of Geosciences,
Douglas Hayhoe, Ph.D.
Texas Tech University
Department of Education,
Milan Sanader, B.Sc., B.Ed., M.Ed Tyndale University College
Dufferin-Peel Catholic District
Jeffrey Major, M.Ed.
School Board
Thames Valley District
School Board
Nelson Science Perspectives 10
Senior Program Consultant Authors Contributing Authors

Maurice DiGiuseppe Christine Adam-Carr Douglas Fraser
Martin Gabber Barry LeDrew
Program Consultants Christy Hayhoe Michael Stubitsch
Douglas Fraser Douglas Hayhoe Richard Towler
Martin Gabber Katharine Hayhoe Judy Wearing
Douglas Hayhoe Milan Sanader
Jeffrey Major
Vice President, Publishing Contributing Editor Cover Image

Janice Schoening Carmen Yu Sebastian Kaulitzki/Shutterstock
General Manager, Mathematics, Editorial Assistants Asset Coordinators

Science, and Technology Vytas Mockus Renée Forde
Lenore Brooks Amy Rotman Suzanne Peden
Wally Zeisig
Publisher, Science Illustrators
John Yip-Chuck Senior Content Production Editor Steve Corrigan
Deborah Lonergan Deborah Crowle
Associate Publisher, Science Steven Hall
David Spiegel Content Production Editors Joel Harris
Carolyn Pisani Sharon Harris
Managing Editor, Development Laurie Thomas
Susan Ball Stephen Hutching
Copy Editor Sam Laterza
National Director of Research Holly Dickinson Dave Mazierski
and Teacher In-Service Dave McKay
Jennette MacKenzie Proofreaders Allan Moon
Margaret Holmes Nesbitt Graphics, Inc.
General Manager, Marketing, Linda Szostak Jan-John Rivera
Math, Science, and Technology Theresa Sakno
Paul Masson Indexer Ann Sanderson
Noeline Bridge Bart Vallecoccia
Product Manager
Lorraine Lue Senior Production Coordinator Compositor
Sharon Latta Paterson Nesbitt Graphics, Inc.
Secondary Sales Specialist
Rhonda Sharpe Design Director Photo Shoot Coordinator
Ken Phipps Lynn McLeod
Program Manager
Julia Lee Interior Design Photo/Permissions Researcher
Bill Smith Studio David Strand
Project Managers Greg Devitt Design
Christina D’Alimonte Printer
Sarah Tanzini Feature Pages Design Transcontinental Printing, Ltd.
Jarrel Breckon
Developmental Editors Courtney Hellam
Nancy Andraos Julie Pawlowicz, InContext
Vicki Austin
Barbara Booth Cover Design
Jessica Fung Eugene Lo
Julia Lee
Susan Skivington
CoPyRIGhT © 2010 by All RIGhTS RESERVED. No part of Every effort has been made to
Nelson Education Ltd. this work covered by the copyright trace ownership of all copyrighted
herein, except for any reproducible material and to secure permission
ISBN-13: 978-0-17-635528-9 pages included in this work, may from copyright holders. In the
ISBN-10: 0-17-635528-6 be reproduced, transcribed, or event of any question arising as
Printed and bound in Canada used in any form or by any means— to the use of any material, we will
1 2 3 4 12 11 10 09 graphic, electronic, or mechanical, be pleased to make the necessary
including photocopying, recording, corrections in future printings.
For more information contact taping, Web distribution, or
Nelson Education Ltd., information storage and retrieval
1120 Birchmount Road, Toronto, systems—without the written
Ontario M1K 5G4. Or you can visit permission of the publisher.
our Internet site at
http://www.nelson.com. For permission to use material
from this text or product, submit
all requests online at
www.cengage.com/permissions.
Further questions about
permissions can be e-mailed to
permissionrequest@cengage.com.
REVIEWERS
Accuracy Reviewers Numeracy Consultant Daniel Gajewski, Hon. B.Sc., B.Ed.
Andrew P. Dicks, Ph.D. Justin DeWeerdt Ottawa Catholic DSB
Senior Lecturer, Department of Curriculum Consultant, Trillium Stephen Haberer
Chemistry, University of Toronto Lakelands DSB Kingston Collegiate and Vocational
Michelle French, B.Sc., M.Sc., Ph.D. Safety Consultant Institute, Limestone DSB
Lecturer, Department of Cell and Jim Agban Faculty of Education,
Systems Biology, University of Past Chair, Science Teachers’ Queen’s University
Toronto Association of Ontario (STAO) Shawna Hopkins, B.Sc., B.Ed., M.Ed.
William Gough, Safety Committee Niagara DSB
Professor of Environmental Science, Chris Howes, B.Sc., B.Ed.
University of Toronto STSE Consultant
Joanne Nazir Durham DSB
Dr. Elizabeth L. Irving, O.D., Ph.D. Ontario Institute for Studies in Janet Johns
Canada Research Chair in Animal Education (OISE), University Upper Canada DSB
Biology of Toronto
Associate Professor, School of Michelle Kane
Optometry, University of Waterloo Technology/ICT Consultant York Region DSB
Meredith White-McMahon, Ph.D. Luciano Lista, B.A. B.Ed., M.A. Dennis Karasek
St. James-Assiniboia School Division Academic Information Communication Thames Valley DSB
Technology Consultant Roche Kelly, B.Sc., B.Ed.
Assessment Consultants Online Learning Principal, Toronto Durham DSB
Aaron Barry, M.B.A., B.Sc., B.Ed. Catholic DSB
Sudbury Catholic DSB Mark Kinoshita
Damian Cooper Advisory Panel and Teacher Toronto DSB
Nelson Education Author Reviewers Emma Kitchen, B.Sc., B.Ed.
Mike Sipos, B.Ph.Ed., B.Ed. Christopher Bonner Near North DSB
Sudbury Catholic DSB Ottawa Catholic DSB
Stephanie Lobsinger
Charles J. Cohen St. Clair Catholic DSB
Catholicity Reviewer
Community Hebrew Academy of
Ted Laxton Alistair MacLeod, B.Sc., P.G.C.E.,
Toronto
Sacred Heart Catholic School, M.B.A.
Wellington Catholic DSB Jeff Crowell Limestone DSB
Halton Catholic DSB
Environmental Education Doug McCallion, B.Sc., B.Ed., M.Sc.
Tim Currie Halton Catholic DSB
Consultant
Bruce Grey Catholic DSB
Allan Foster, Ed.D., Ph.D. Nadine Morrison
Working Group on Environmental Lucille Davies Hamilton-Wentworth DSB
Education, Ontario Limestone DSB
Dermot O’Hara, B.Sc., B.Ed., M.Sc.
Former Director of Education, Greg Dick Toronto Catholic DSB
Kortright Centre for Conservation Waterloo Region DSB
Mike Pidgeon
ESL/Culture Consultant Matthew Di Fiore Toronto DSB
Vicki Lucier, B.A., B.Ed., Adv. Ed. Dufferin-Peel Catholic DSB
William J.F. Prest
ESL/Culture Consultant, Simcoe Ed Donato Rainbow DSB
County DSB Simcoe Muskoka Catholic DSB
Ron M. Ricci, B.E.Sc., B.Ed.
Literacy Consultants Dave Doucette, B.Sc., B.Ed. Greater Essex DSB
Jill Foster York Region DSB
Charles Stewart, B.Sc., B.Ed.
English/Literacy Facilitator, Chantal D’Silva, B.Sc., M.Ed. Peel DSB
Durham DSB Toronto Catholic DSB
Richard Towler
Jennette MacKenzie Naomi Epstein Peel DSB
National Director of Research Community Hebrew Academy of
Carl Twiddy
and Teacher In-Service, Toronto
Formerly of York Region DSB
Nelson Education Ltd. Xavier Fazio
Jim Young
Michael Stubitsch Faculty of Education, Brock University
Limestone DSB
Education Consultant
NEL Reviewers iii

Contents
Discover Your Textbook . . . . . . . . . . . . . . . . xii CHAPTER 2

Cells, Cell Division, and Cell
UNIT A: INTRODUCTION TO SCIENTIFIC Specialization. . . . . . . . . . . . . . . . . . . . . . . . 24
INVESTIGATION SKILLS AND CAREER Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
EXPLORATION . . . . . . . . . . . . . . . . . . . 2 Engage in Science: You Can Make a Difference . . . . . . . 26
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Focus on STSE: Science and Your Life . . . . . . . . . . 3
Focus on Reading: Making Connections . . . . . . . . . . . . . 28
2.1 Plant and Animal Cells . . . . . . . . . . . . . . . . . . . 29
CHAPTER 1
Tech Connect: Seeing Inside . . . . . . . . . . . . . . . . . . . . . . 33
Living and Working with Science . . . . . . . . 4
2.2 PERFORM AN ACTIVITY:
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Observing Plant and Animal Cells . . . . . . . . . 34
Engage in Science: A Breath of Fresh Air! . . . . . . . . . . . . 6
2.3 The Importance of Cell Division . . . . . . . . . . . 36
Focus on Reading: How to Read Non-Fiction Text . . . . . . . 7
2.4 CONDUCT AN INVESTIGATION:
1.1 Skills of Scientific Investigation . . . . . . . . . . . . . 8 What Limits Cell Size? . . . . . . . . . . . . . . . . . . . 38
Try This: Identifying Variables and 2.5 The Cell Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Making Predictions . . . . . . . . . . . . . . . . . . . . . . 11
Try This: Identify the Phases
Try This: Analyzing Data . . . . . . . . . . . . . . . . . 13 of Mitosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Try This: Getting Your Message Across . . . . . 15 Awesome Science: Aging: It Is in Our Cells . . . . . . . . . . 45
1.2 Scientific Literacy for Living and 2.6 PERFORM AN ACTIVITY:
Working in Canada . . . . . . . . . . . . . . . . . . . . . . 16 Observing Cell Division . . . . . . . . . . . . . . . . . . 46
Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . . 19 2.7 Cell Division Going Wrong: Cancer . . . . . . . . 48
Research This: Cancer Screening and
UNIT B: TISSUES, ORGANS, AND Prevention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
SYSTEMS OF LIVING THINGS . . . . . . 20 Citizen Action: Cancer Education

and Research . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Focus on STSE: Medical Technology . . . . . . . . . . 21
Unit B Looking Ahead . . . . . . . . . . . . . . . . . . . .22 Comparing Cancer Cells
Unit Task Preview: Family Health Supporter . . . 22 and Normal Cells . . . . . . . . . . . . . . . . . . . . . . . . 56
What Do You Already Know? . . . . . . . . . . . . . . . . . . 23 2.9 Specialized Cells . . . . . . . . . . . . . . . . . . . . . . . . . 58
Observing Specialized Cells . . . . . . . . . . . . . . . 61
Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . . 62
What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . . 63
Chapter 2 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 2 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
iv Contents NEL
CHAPTER 3 Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 114
What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 115
Animal Systems . . . . . . . . . . . . . . . . . . . . . . 68
Chapter 3 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Chapter 3 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Engage in Science: Growing a New Trachea . . . . . . . . . . 70
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
CHAPTER 4
Focus on Writing: Writing to Describe
and Explain Observations . . . . . . . . . . . . . . . . . . . . . . . . . 72 Plant Systems . . . . . . . . . . . . . . . . . . . . . . 120
3.1 The Hierarchy of Structure in Animals . . . . . 73 Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
3.2 Stem Cells and Cellular Differentiation . . . . . 77 Engage in Science: Plant Tissues:
Research This: Stem Cell Research Something to Chew On . . . . . . . . . . . . . . . . . . . . . . . . . . 122
in Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 123
3.3 The Digestive System . . . . . . . . . . . . . . . . . . . . . 80 Focus on Reading: Asking Questions . . . . . . . . . . . . . . 124
3.4 The Circulatory System . . . . . . . . . . . . . . . . . . . 83 4.1 Systems in Plants . . . . . . . . . . . . . . . . . . . . . . . 125
Try This: Examining Blood Vessels . . . . . . . . 85 4.2 Plant Tissue Systems . . . . . . . . . . . . . . . . . . . . 129
Research This: Problems in the Research This: When Plants
Circulatory System. . . . . . . . . . . . . . . . . . . . . . . 87 Get Sick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
3.5 PERFORM AN ACTIVITY: 4.3 EXPLORE AN ISSUE CRITICALLY:
Studying the Organ Systems of a Frog . . . . . . 88 Transgenic Plant Products . . . . . . . . . . . . . . . 134
Science Works: West Nile Virus . . . . . . . . . . . . . . . . . . . 90 4.4 Tissues Working Together . . . . . . . . . . . . . . . 136
3.6 The Respiratory System . . . . . . . . . . . . . . . . . . . 91 Try This: Your Own Guard Cells . . . . . . . . . 138
Research This: Canadians in Science . . . . . . . 95 4.5 PERFORM AN ACTIVITY:
3.7 Organ Transplantation . . . . . . . . . . . . . . . . . . . 96 Plant Cells and Tissues . . . . . . . . . . . . . . . . . . 140
Research This: The Ethics of Science Works: For the Love of Plants:
Xenotransplantation . . . . . . . . . . . . . . . . . . . . . 98 The Royal Botanical Gardens . . . . . . . . . . . . . . . . . . . . . 142
3.8 The Musculoskeletal System . . . . . . . . . . . . . . . 99 4.6 Plant Growth . . . . . . . . . . . . . . . . . . . . . . . . . . 143
3.9 PERFORM AN ACTIVITY: Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 148

Exploring the Structure and Function What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 149
of Tissues in a Chicken Wing. . . . . . . . . . . . . 102 Chapter 4 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
3.10 The Nervous System . . . . . . . . . . . . . . . . . . . . 104 Chapter 4 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Try This: Mapping Sensory Receptors . . . . . 105
Unit B Looking Back . . . . . . . . . . . . . . . . . . . . . 154
Research This: DNA Screening . . . . . . . . . . . 107
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
3.11 Interactions of Systems . . . . . . . . . . . . . . . . . . 108
Make a Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Research This:
Career Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Systems Working Together . . . . . . . . . . . . . . . 111
Tech Connect: Monitoring the Health Unit B Task: Family Health Supporter . . . . . 156
of an Unborn Baby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Unit B Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
3.12 EXPLORE AN ISSUE CRITICALLY:
To Immunize or Not to Immunize? . . . . . . . 113 Unit B Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
NEL Contents v
UNIT C: CHEMICAL REACTIONS . . . . 166 5.4 Patterns and the Periodic Table . . . . . . . . . . 184
5.5 Atoms and Ions . . . . . . . . . . . . . . . . . . . . . . . . 188
Focus on STSE: Aspirin and Heroin . . . . . . . . . . 167
Try This: Ions and the Periodic Table . . . . . 191
Unit C Looking Ahead . . . . . . . . . . . . . . . . . . . . 168
5.6 Ionic Compounds . . . . . . . . . . . . . . . . . . . . . . 192
Unit Task Preview: Acid Shock . . . . . . . . . . . . . . 168
Try This: Testing for Electrolytes . . . . . . . . . 194
What Do You Already Know? . . . . . . . . . . . . . . . . . 169
5.7 Names and Formulas of Ionic
Compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
CHAPTER 5
Try This: Two Shades of Iron . . . . . . . . . . . . 199
Chemicals and Their Properties . . . . . . . 170
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Chlorine Conclusions . . . . . . . . . . . . . . . . . . . 201
Engage in Science: Space Elevator. . . . . . . . . . . . . . . . 172 5.9 Polyatomic Ions . . . . . . . . . . . . . . . . . . . . . . . . 202
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 173 5.10 Molecules and Covalent Bonding . . . . . . . . . 206
Focus on Writing: Writing a Summary. . . . . . . . . . . . . . 174 Try This: Molecular Models . . . . . . . . . . . . . . 208
5.1 Properties and Changes . . . . . . . . . . . . . . . . . 175 Research This: Slicks from Ships . . . . . . . . . 211
Citizen Action: Cadmium Cleanout . . . . . . 176 5.11 CONDUCT AN INVESTIGATION:
Research This: Chemicals for Your Hair . . . 177 Properties of Ionic and Molecular
Science Works: Processing Hazardous Waste . . . . . . . 179 Compounds . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
5.2 PERFORM AN ACTIVITY: Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 214
Identifying Physical and Chemical What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 215
Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Chapter 5 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
5.3 Hazardous Products and Workplace Chapter 5 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Research This: Which Bleach Is Best? . . . . . 183
vi Contents NEL
CHAPTER 6 CHAPTER 7
Chemicals and Their Reactions . . . . . . . . 220 Acids and Bases . . . . . . . . . . . . . . . . . . . . 262
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Engage in Science: The Mint–Cola Fountain . . . . . . . . 222 Engage in Science: The Greening of Sudbury . . . . . . . . 264
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 223 What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 265
Focus on Reading: Making Inferences . . . . . . . . . . . . . 224 Focus on Writing: Writing a Science Report . . . . . . . . . 266
6.1 Describing Chemical Reactions . . . . . . . . . . . 225 7.1 PERFORM AN ACTIVITY:
6.2 CONDUCT AN INVESTIGATION: Classifying Acids and Bases . . . . . . . . . . . . . 267
Is Mass Gained or Lost During a 7.2 Properties, Names, and Formulas . . . . . . . . . 268
Chemical Reaction? . . . . . . . . . . . . . . . . . . . . 228 7.3 The pH Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
6.3 Conserving Mass in Chemical Try This: Visualize the pH Scale . . . . . . . . . . 273
Reactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Try This: Modelling Balanced Chemical The pH of Household Substances . . . . . . . . . 276
Equations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
7.5 Neutralization Reactions. . . . . . . . . . . . . . . . . 278
6.4 Information in Chemical Equations . . . . . . . 233
Try This: Neutralize It . . . . . . . . . . . . . . . . . . 280
Research This: Gas Furnace Technician . . . 236
6.5 Types of Chemical Reactions: Analyzing an Acid Spill . . . . . . . . . . . . . . . . . 282
Synthesis and Decomposition . . . . . . . . . . . . 237
Research This: Proposal to Ban Minimizing Risk for a Community . . . . . . . 283
Fertilizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Awesome Science: Painting Out Pollution . . . . . . . . . . 284
6.6 Types of Chemical Reactions:
7.8 Acid Precipitation . . . . . . . . . . . . . . . . . . . . . . 285
Single and Double Displacement. . . . . . . . . . 240
Tech Connect: Scrubbers: Antacids for
Research This: When Gold Loses
Smokestacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
Its Glitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 292
Synthesis and Decomposition Reactions . . . 244 What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 293
6.8 PERFORM AN ACTIVITY: Chapter 7 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Displacement Reactions . . . . . . . . . . . . . . . . . 246 Chapter 7 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 296
6.9 Types of Chemical Reactions: Unit C Looking Back . . . . . . . . . . . . . . . . . . . . . 298
Combustion . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Citizen Action: Carbon Monoxide
Make a Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Detectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Career Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Research This: Firefighting with an
MSDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251 Unit C Task:
6.10 Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 Acid Shock: A Silent Killer . . . . . . . . . . . . . . . . 300
Awesome Science: Poisonous Jewellery . . . . . . . . . . . 255 Unit C Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Unit C Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 308
Chapter 6 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Chapter 6 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
NEL Contents vii

UNIT D: CLIMATE CHANGE . . . . . . . 310 8.6 The Greenhouse Effect . . . . . . . . . . . . . . . . . . 338
Focus on STSE: Who Is to Blame? . . . . . . . . . . . 311 Try This: How Tiny Concentrations
Can Make a Difference . . . . . . . . . . . . . . . . . . 341
Unit D Looking Ahead . . . . . . . . . . . . . . . . . . . . 312
Unit Task Preview: Global Climate Change . . . 312
Modelling the Greenhouse Effect . . . . . . . . . 343
8.8 Energy Transfer within the Climate
System: Air and Ocean Circulation. . . . . . . . 344
CHAPTER 8 Try This: Examine Air and
Earth’s Climate System and Natural Water Currents . . . . . . . . . . . . . . . . . . . . . . . . . 344
Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 8.9 Long-Term and Short-Term Changes
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 in Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 348
Engage in Science: Evidence of a Different Research This: El Niño . . . . . . . . . . . . . . . . . . 352
Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 Try This: Exploring the Sun’s Energy
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Focus on Reading: Finding the Main Idea . . . . . . . . . . . 318 Science Works: Lake Agassiz: Studying
8.1 Weather and Climate . . . . . . . . . . . . . . . . . . . . 319 Past Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
8.2 Classifying Climate . . . . . . . . . . . . . . . . . . . . . 322 8.10 Feedback Loops and Climate . . . . . . . . . . . . . 355
Research This: Classify Your Climate . . . . . 324 Try This: Testing the Albedo Effect . . . . . . . 356
8.3 The Sun Powers Earth’s Climate 8.11 Studying Clues to Past Climates . . . . . . . . . . 358
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325 Try This: Ancient Climates in Arctic
Try This: Testing A Model of Lands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
The Earth−Sun Energy System . . . . . . . . . . . 327 Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 362
8.4 Components of Earth’s Climate System . . . . 330 What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 363
Research This: Smog Days . . . . . . . . . . . . . . 332 Chapter 8 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
8.5 PERFORM AN ACTIVITY: Chapter 8 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Comparing Canadian Climates . . . . . . . . . . . 336
viii Contents NEL

CHAPTER 9 10.2 Global Impacts of Climate Change . . . . . . . 412
Research This: Controversy about
Earth’s Climate: Out of Balance . . . . . . . 368
Climate Change . . . . . . . . . . . . . . . . . . . . . . . . 414
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369
Research This: Competition for the
Engage in Science: Changing Our Lives . . . . . . . . . . . . 370 Arctic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 371 Citizen Action: How Can We Protect
Focus on Reading: Summarizing . . . . . . . . . . . . . . . . . 372 the Arctic? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417
9.1 Evidence of a Changing Climate . . . . . . . . . 373 Awesome Science: Geoengineering to
Try This: Calculate Sea Level Rise . . . . . . . . 375 Combat Climate Change? . . . . . . . . . . . . . . . . . . . . . . 418
Research This: Is Climate Change 10.3 Impacts of Climate Change on
Always Bad? . . . . . . . . . . . . . . . . . . . . . . . . . . . 378 Ontario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419
Tech Connect: Using Satellites to Monitor Earth . . . . . . 379 10.4 Taking Action to Limit Climate
9.2 PERFORM AN ACTIVITY: Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
Analyzing Sea Ice Extent for Evidence Research This: Greenhouse Gas
of Climate Change . . . . . . . . . . . . . . . . . . . . . . 380 Emissions in Your Community . . . . . . . . . . . 426
9.3 PERFORM AN ACTIVITY: 10.5 What Can Individuals Do? . . . . . . . . . . . . . . 429
Thermal Expansion and Sea Level. . . . . . . . . 382 Research This: Buying ENERGY STAR®
9.4 Greenhouse Gases: Changing the Appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429
Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 384 Research This: Eating Local. . . . . . . . . . . . . . 430
Try This: Comparing Carbon Citizen Action: Everyone Can Make a
Dioxide Concentrations with Difference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431
Global Temperature . . . . . . . . . . . . . . . . . . . . . 387 10.6 EXPLORE AN ISSUE CRITICALLY:
9.5 Canadian Emissions of Greenhouse Taking Action on Climate Change
Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Now or Later? . . . . . . . . . . . . . . . . . . . . . . . . . 434
9.6 Computer Modelling: Evidence that Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 436
Human Activity Is Causing Current What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 437
Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393
Chapter 10 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . 438
Chapter 10 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . 440
Chapter 9 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398 Unit D Looking Back . . . . . . . . . . . . . . . . . . . . . 442
Chapter 9 Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Make a Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
CHAPTER 10 Career Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
Assessing and Responding to Climate Unit D Task: Global Climate Change . . . . . . 444
Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
Unit D Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 446
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Engage in Science: Green Technologies . . . . . . . . . . . 404 Unit D Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 452
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Focus on Reading: Synthesizing . . . . . . . . . . . . . . . . . . 406
10.1 Climate Models and Clean Energy . . . . . . . . 407
Try This: Estimate Ontario’s Future
Climate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409
NEL Contents ix
UNIT E: LIGHT AND GEOMETRIC 11.8 CONDUCT AN INVESTIGATION:
Locating Images in a Plane Mirror . . . . . . . . 494
OPTICS . . . . . . . . . . . . . . . . . . . . . . 454
11.9 Images in Curved Mirrors . . . . . . . . . . . . . . . 496
Focus on STSE: Window on the World . . . . . . . 455
11.10 CONDUCT AN INVESTIGATION:
Unit E Looking Ahead . . . . . . . . . . . . . . . . . . . . . 456 Locating Images in Curved Mirrors . . . . . . . 502
Unit Task Preview: Building an Optical Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 504
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 456
Chapter 11 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
CHAPTER 11
The Production and Reflection
CHAPTER 12
of Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458
The Refraction of Light . . . . . . . . . . . . . . . 510
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 511
Engage in Science: The LASER . . . . . . . . . . . . . . . . . . 460
Engage in Science: From Earth to the Moon
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 461
and Back! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 512
Focus on Writing: Writing Persuasive Text. . . . . . . . . . . 462
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 513
11.1 What Is Light? . . . . . . . . . . . . . . . . . . . . . . . . . 463
Focus on Reading: Evaluating . . . . . . . . . . . . . . . . . . . . 514
Research This: Protecting Yourself
12.1 What Is Refraction? . . . . . . . . . . . . . . . . . . . . 515
from the Sun . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
Try This: Exploring with Light . . . . . . . . . . . 515
Try This: Viewing the Visible Spectrum . . . 467
Try This: Examining Light in a Window . . . 518
11.2 How Is Light Produced? . . . . . . . . . . . . . . . . 470
Citizen Action: Thinking for the Future . . . 473
The Path of Light—From Air into
Try This: Glowing with Light . . . . . . . . . . . . 474 Acrylic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520
Try This: Eating Candy for the Sake 12.3 PERFORM AN ACTIVITY:
of Science . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 The Refraction of Light through
11.3 The Laser—A Special Type of Light . . . . . . . 477 Different Media . . . . . . . . . . . . . . . . . . . . . . . . 522
Research This: Lasers for Different Uses . . . 478 12.4 The Index of Refraction . . . . . . . . . . . . . . . . . 524
11.4 The Ray Model of Light . . . . . . . . . . . . . . . . . 479 12.5 Total Internal Reflection . . . . . . . . . . . . . . . . . 526
Try This: Seeing the Light . . . . . . . . . . . . . . . 480 12.6 PERFORM AN ACTIVITY:
11.5 PERFORM AN ACTIVITY: Measuring the Critical Angle for
Reflecting Light Off a Plane Mirror . . . . . . . 482 Various Media . . . . . . . . . . . . . . . . . . . . . . . . . 532
11.6 The Laws of Reflection . . . . . . . . . . . . . . . . . . 484 Science Works: Hiding in Plain Sight—
Try This: Reflecting Light . . . . . . . . . . . . . . . . 484 The Invisibility Cloak . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
Try This: Retro-Reflectors . . . . . . . . . . . . . . . 486 12.7 Phenomena Related to Refraction . . . . . . . . . 535
Tech Connect: Cleaning with Light . . . . . . . . . . . . . . . . 487 Research This: Other Atmospheric
Optical Phenomena . . . . . . . . . . . . . . . . . . . . . 539
11.7 Images in Plane Mirrors . . . . . . . . . . . . . . . . . 488
Try This: Writing Reflectively . . . . . . . . . . . . 488
Try This: Producing Images, and More
Images, and More Images … . . . . . . . . . . . . . 489 Chapter 12 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . 542
x Contents NEL
CHAPTER 13 What Do You Think Now? . . . . . . . . . . . . . . . . . . . . . . 581
Chapter 13 Review. . . . . . . . . . . . . . . . . . . . . . . . . . . . 582
Lenses and Optical Devices . . . . . . . . . . . 546
Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547
Engage in Science: Checking the Facts in Fiction . . . . 548 Unit E Looking Back . . . . . . . . . . . . . . . . . . . . . 586
What Do You Think? . . . . . . . . . . . . . . . . . . . . . . . . . . 549 Key Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586
Focus on Writing: Writing a Critical Analysis . . . . . . . . . 550 Make a Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 587
13.1 Lenses and the Formation of Images . . . . . . 551 Career Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 587
13.2 PERFORM AN ACTIVITY: Unit E Task: Building an Optical
Locating Images in Lenses . . . . . . . . . . . . . . . 554 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 588
13.3 Images in Lenses . . . . . . . . . . . . . . . . . . . . . . . 556
Unit E Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 590
Try This: Exploring the Rectangular
Prism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 556 Unit E Self-Quiz . . . . . . . . . . . . . . . . . . . . . . . . . . . 596
13.4 The Lens Equations . . . . . . . . . . . . . . . . . . . . . 562
13.5 Lens Applications . . . . . . . . . . . . . . . . . . . . . . . 567
Appendix A: Skills Handbook . . . . . . . . . 598
Awesome Science: The Einstein Ring . . . . . . . . . . . . . 571
13.6 The Human Eye . . . . . . . . . . . . . . . . . . . . . . . . 572 Appendix B: What Is Science? . . . . . . . . 648
Try This: Discovering Your Blind Spot . . . . 573 Numerical and Short Answers . . . . . . . . 658
Research This: Other Vision Problems . . . . 577
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 667
Laser Eye Surgery. . . . . . . . . . . . . . . . . . . . . . . 578 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 674
Credits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 683
NEL Contents xi
Discover Your Textbook
This textbook will be your guide to the exciting world of science. On the following
pages is a tour of important features that you will find inside. GET READY includes
all of the features of the introductory material that come before you begin each unit
and chapter. GET INTO IT shows you all the features within each chapter. Finally,
WRAP IT UP shows you the features at the end of each chapter and unit.
Focus on STSE
Get Ready These articles introduce
real-world connections to the
science topics you will be
Unit Opener
C
learning in the unit.
Each of the five units has a
UNIT
Chemical
letter and a title. Use the photo Reactions
to help you predict what you Focus on STSE
might be learning in the unit. OVERALL ASPIRIN AND HEROIN

Expectations
Got a headache? Like millions of other pain sufferers around the world, you may turn
analyze a variety of to Aspirin for quick relief. Surprisingly, Aspirin was first made using the same chemical
safety and environmental reaction that produced heroin—a highly addictive and illegal narcotic.
issues associated with
chemical reactions, The Bayer drug company first made Aspirin in the 1890s, but officials initially ignored the
Overall Expectations including the ways in new product. In 1898, Bayer chemists used the same reaction on morphine, a well-known
which chemical reactions pain reliever at the time. Tests on the new product were impressive: it was a good pain
can be applied to address reliever and an even better cough remedy. Plus, it made the patient feel wonderful! Bayer
environmental challenges had invented heroin. Soon, a new Bayer cough syrup called “Heroin” was in drug stores
The Overall Expectations investigate,

through inquiry, the
characteristics of
around the world. Shortly thereafter, reports about heroin addiction began to appear.
Public pressure forced Bayer to stop producing their heroin-laced cough syrup in 1913.
Heroin medications are no longer available. Bayer eventually recognized Aspirin’s
describe what you should be

chemical reactions potential, and it is now widely used around the world as a painkiller.
demonstrate an The history of Aspirin and heroin teaches us the importance of thoroughly testing a new
understanding of the
product before making it available. It also shows how the chemicals we produce through
general principles of
able to do after completing

chemical reactions can have both costs and benefits.
chemical reactions,
and various ways to 1. List some costs and some benefits for each of the following substances. Consider
represent them various perspectives (environmental, social, economical, and so on) as you think about
the unit.
the costs and benefits. T / I A
(a) cleaning products (c) explosives (e) plastic
BIG Ideas (b) salt (d) fuels (f) pesticides
Chemicals react with 2. Discuss the following questions with your partner. C A
each other in predictable (a) What other costs and benefits could you add to your table?
ways. (b) Why might some chemical companies be willing to introduce new chemicals
Chemical reactions may into society and the environment without thoroughly testing them first?
have a negative impact (c) How can we maximize the benefits of chemicals and minimize the costs?
Big Ideas
on the environment, but
they can also be used to
address environmental
challenges.
The Big Ideas summarize

the concepts you need to
166 Unit C • Chemical Reactions NEL NEL Focus on STSE 167
remember after you complete

the unit.
What Do You Already Know?

This feature lists the concepts and skills,
Concept Map developed in previous grades, that you will
The Concept Map is a description of the need to be successful as you work through the
topics, connected to picture clues, to help you unit. Use the questions to see what you already
predict what you will be learning in the unit. know before you start the unit.
Unit Task Preview UNIT

LOOKING AHEAD
Find out about the Unit Task C
UNIT C What Do You Already Know?
that you will complete at the Chemical
PREREQUISITES
Concepts Skills
Reactions
end of each unit.
• Density and buoyancy • Writing chemical formulas
• Models of the atom • Observing properties of substances
• Classification of matter • Following safety precautions in the lab
1. Two cans of cola are placed in a tank of water. The can 5. In 1909, Ernest Rutherford fired positively charged alpha
containing regular cola sinks to the bottom of the tank and particles at a very thin sheet of gold foil. As he expected, the
CHAPTER 5 CHAPTER 6 CHAPTER 7 the can containing diet cola floats to the surface. T / I majority of the particles passed through the foil. However, a
(a) Using the provided observations, compare the densities small number of alpha particles rebounded off the foil. Which
Chemicals and Chemicals and Acids and Bases of the following models of the atom best explains these
of the cans of cola with the density of water.
Their Properties Their Reactions observations. Why? K / U
(b) Why might there be a difference in the densities of the
two colas? Model A Model B Model C
Unit Task Bookmark

2. In your notebook, write the chemical formula (selected from The atom is a hard The atom is a The atom has a
the list on the right) of each of these substances. K / U sphere—like these positive sphere small, dense positive
billiard balls. with embedded core orbited by
(a) hydrogen H2O electrons—like electrons—like
(b) carbon dioxide NaCl raisins in a muffin. planets orbit a star.
When you see the Unit Task (c) table salt

(d) hydrogen chloride
(e) water
CO2
H2
O2

Scientists and engineers think about Chemicals are all around us, and can Acids and bases are important
Bookmark, think about how the the properties of the materials used in
new products.
sometimes react in surprising ways. substances in our lives and in the
environment.
(f) oxygen HCl
3. List some of the properties of the substances shown in 6. (a) What fundamental particle inside the atom is responsible
Figure 1. K / U
section relates to the Unit Task.

for the “hair-raising experience” shown in Figure 2?
UNIT TASK Preview
Acid Shock In the Unit Task, you will use the knowledge and skills
acquired in this unit to
In this unit, you will explore the chemical reactions that
• use a model to test whether the amount of acid released
chemicals undergo. Some reactions, like those involved in
by a melting solid varies as the solid melts
the formation of acid rain, have a negative impact on the
• suggest how chemical reactions can be used to prevent the (a) (b) Figure 2
environment. But there is a good side to chemical reactions
loss of tadpoles in the stream during the first thaw of spring Figure 1 (a) the gold in a ring (b) the water in a kettle
as well. Chemical reactions can also be used to undo some (b) Compare the three fundamental particles in an atom with
of the environmental damage caused by human activity. UNIT TASK Bookmark 4. Draw Bohr-Rutherford diagrams to represent the following respect to size, mass, charge, and location. K / U
Assessment
In the Unit Task, you are part of a research team investigating atoms: C 7. What safety precautions are being taken in Figure 3? K/U
The Unit Task is described in detail on page 300. As you
tadpoles and frogs in a local stream. With each spring thaw, work through the unit, look for this bookmark and see how (a) lithium
the population of these organisms crashes and then recovers. the section relates to the Unit Task. (b) carbon
Preliminary research shows that the cause of their death is (c) chlorine
The Assessment box tells you the acidity of the melting snow. However, what remains a
mystery is the sudden drop in the population followed by a
gradual recovery.
ASSESSMENT
You will be assessed on how well you
(d) argon
• plan and conduct a test of the model
how you will demonstrate what

Your task is to find the reason for this dip by using a model of
the situation. You will also suggest ways to prevent the loss • communicate the results of your test
of the tadpoles each spring. • evaluate your model
• justify your suggestion for preventing acid shock Figure 3
you have learned by the end of 168 Unit C • Chemical Reactions NEL NEL Looking Ahead 169
the unit.
xii Discover Your Textbook NEL

CHAPTER
Chapter Opener 5 Chemicals and

UNIT C
Chemical
Reactions
Their Properties
Each chapter has a number, a
title, and a Key Question which KEY QUESTION: How do the properties of
Key Concepts
CHAPTER 5 CHAPTER 6 CHAPTER 7
compounds influence the technologies we develop, Chemicals and Chemicals and Acids
you should be able to answer the products we buy, and the world we live in? Their Properties Their Reactions and Bases
The Key Concepts

by the end of the chapter.
feature outlines the
KEY CONCEPTS
main ideas and skills

you will learn in the
A substance’s chemical Changes can be classified We can classify pure
chapter.
and physical properties as chemical or physical. substances by observing
determine its usefulness their properties.
and effects.
Ionic compounds are Molecular compounds Many consumer products

made up of positive and are made up of distinct are developed from
negative ions. molecules. petrochemicals.
This is an artist’s impression of a space elevator. We would require

materials with very special properties if we ever actually designed
and built it.
170 Chapter 5 • Chemicals and Their Properties NEL NEL Looking Ahead 171
ENGAGE IN WHAT DO YOU
Engage in SCIENCE THINK? What Do You Think?

Science
Many of the ideas you will explore in this chapter are ideas that you have already
encountered. You may have encountered these ideas in school, at home, or in
the world around you. Not all of the following statements are true. Consider each
Using what you already know,
statement and decide whether you agree or disagree with it.
These articles form an opinion by agreeing or

Na
connect the topics disagreeing with statements
you will learn in that connect to ideas that will
be introduced in the chapter.
Imagine stepping onto an elevator, pressing the button for
the chapter to the 12 millionth floor, and going for the ride of your life.
Within an hour or two, the land beneath your feet and 1 The label on a chemical product provides all the
information you need to use the product safely.
4 Elements are more reactive and more hazardous than the
compounds that they form.
the warmth of the Sun are replaced by the cold darkness Agree/disagree? Agree/disagree?
interesting real-world of space.

Getting people and cargo into space the old-fashioned
way—by using rockets—is expensive, dangerous, and
developments in
unreliable, so NASA engineers are looking for a better way.
Some believe that a space elevator may be the answer.
The space elevator would consist of a long cable—more
than three times as long as the diameter of Earth—firmly
science. attached to a point on Earth’s equator. At the other end,

about 40 000 km straight up, would be a large mass. As
long as this mass orbits Earth at the same rate as Earth
is rotating, the cable connecting it to Earth remains taut.
This would allow a “space-proof” elevator car to climb the 2 Recycling used motor oil is common practice.
Agree/disagree?
5 Bottled water is better for your health than tap water.
Agree/disagree?
cable. But plenty of questions need to be answered before
we start putting this plan into action. For example, what
does this cable have to do, and where must it operate?
What physical and chemical properties should the
cable have? Are there any common substances
that have at least some of these properties? Do
these common substances have any properties
that make them unsuitable? Could the
substances be changed to overcome this
problem? And, perhaps most importantly,
how would this device impact our lives
and our planetary home?
3 Pool water is a much better conductor of electricity than
pure water.
6 Adding manufactured chemicals to the environment is a
bad thing.
Agree/disagree? Agree/disagree?
172 Chapter 5 • Chemicals and Their Properties NEL NEL What Do You Think? 173
Focus on Reading/ FOCUS ON FOCUS ON
Focus on Writing READING WRITING

Making Inferences Writing a Science Report
These reading and writing When you make inferences, you make sense of what an author is implying
WRITING TIP
When you write a science report, you use a standard format with
strategies help you learn

but not stating explicitly. It is a form of problem-solving using evidence organizational headings to explain the purpose, procedure, and findings
from the text, personal knowledge, and reasoning. Use the following As you work through the chapter, of your investigation. Use the strategies listed next to the report to
look for tips like this. They will help
strategies to make inferences: improve your report-writing skills.
you develop literacy strategies.
• look for context clues such as significant words, comparisons, or contrasts
science concepts and develop READING TIP

As you work through the chapter,
• think about what you already know about the circumstance, issue,
problem, cause, or effect
Properties of Ionic and Molecular Compounds
Question
• combine the clues and your prior knowledge or experience to draw
literacy skills in preparation for

you develop literacy strategies. a conclusion or form an opinion State your purpose, question, Are the following substances molecular or ionic compounds: lauric acid, C12H24O2; sodium
• revise your inference if you find new information or clues that challenge it
and hypothesis concisely. hydrogen carbonate, NaHCO3; glucose, C6H12O6; potassium chloride, KCl ?
Hypothesis/Prediction
the OSSLT. Types of Chemical Reactions: Combustion
Lauric acid and glucose are molecular compounds because they only have non-metallic elements
in them. Potassium chloride is an ionic compound because it contains a metal and a non-metal.
In the early hours of August 2, 2008, a north Toronto neighbourhood Sodium hydrogen carbonate is also ionic because it contains the hydrogen carbonate ion.
was rocked by a loud explosion. Startled residents stared out their
windows in disbelief as a giant fireball rose high into the night sky. Experimental Design
Why? A nearby propane storage depot was on fire (Figure 1)! Large Each substance will be mixed with water to see if it dissolves. Each solutions will be tested for
Briefly describe the investigation.
chunks of metal, probably from exploded propane storage tanks, littered conductivity. The melting point of each substance will be researched.
the area. Shockwaves from the explosion shattered windows and ripped
Figure 1 Propane was the fuel in this doors off their hinges. Firefighters rushed to the scene, but all they Equipment and Materials
dramatic combustion reaction in north
Toronto.
could do was cool the remaining propane tanks with water and wait for eye protection conductivity tester well plate
Outline what is required to
the fireball to burn itself out. apron lauric acid, C12H24O2 glucose, C6H12O6
Reading/Writing Tip
conduct the investigation.
4 small test tubes & stoppers sodium hydrogen carbonate, potassium chloride, KCl
test tube rack NaHCO3 water
Making Inferences in Action Procedure
Reading Tips suggest reading Authors often tell you more than they say directly through their words.
Use the clues in the text and what you already know to make an
Use a numbered list of
directions to describe each
1. Eye protection and an apron were obtained.
2. A small amount of each solid was placed in its own test tube.
3. Each test tube will filled about half full with water, stoppered, and inverted to mix.
comprehension strategies
inference. Inferences help you to have a deeper understanding of the step of the procedure.
text. Here is how one student made inferences as she read the paragraph 4. Observations were recorded for how well the solids dissolved.
about combustion.
5. A small amount of each liquid was poured into its own well in the well plate.
6. The conductivity tester was dipped into each liquid .
to help you understand the Clues from Text
explosion happened
+ Prior Knowledge
• fire causes explosions

= Inference
an arsonist might have

Write in the third person
using an objective tone. 7. Observations were recorded for whether each liquid conducts electricity.
8. The melting point of each solid was researched in a reference book. Present all observations,
at night caused this explosion
• arsonists usually work Observations
science concepts presented in
whether they support your
at night
prediction or not.
Substance Dissolves in water? Conductive Melting point (oC)
explosion is in a most homes are heated by a cracked natural gas Evaluate the extent to
residential area natural gas pipe might have caused which your evidence lauric acid no no 45
the text. Writing Tips provide

the explosion supports your hypothesis.
firefighters let fireball firefighters usually use water maybe water cannot be used Analyze and Evaluate Revise your drafts to improve
burn out to extinguish a fire to put out a propane fire organization and completeness.
(a) Sodium hydrogen carbonate and potassium chloride are the only ionic
suggestions to help you 224 Chapter 6 • Chemicals and Their Reactions NEL 266 Chapter 7 • Acids and Bases
compounds because they conducted electricity when dissolved in water.
NEL
improve your writing skills.
NEL Discover Your Textbook xiii

Get Into It
Vocabulary Weather and Climate 8.1

Is today a warm, sunny day or is it cold and rainy? When you describe the
You will learn many new terms as you work conditions outside on a particular day, you are describing the weather.
Describe today’s weather to a classmate, using as much detail as you
can. Include the temperature and precipitation (if present). What other
weather atmospheric conditions,
including temperature, precipitation, wind,
and humidity, in a particular location over
a short period of time, such as a day or
Learning Tip
through the chapter. These key terms are in
conditions can you describe?
Learning Tips are useful

a week
Describing the Weather
bold print. Their definitions can be found in the

Scientists who study the weather are called meteorologists. Meteorologists
usually provide the following information when they describe the weather:
• temperature
LEARNING TIP
Humidity and Temperature
Water vapour (the gaseous state
strategies to help you learn new
margins and in the Glossary at the back of the ideas and make sense of what
• type and amount of precipitation of water) forms when liquid
water evaporates. When water
• wind speed
evaporates, the vapour mixes with
• relative humidity (the amount of water vapour in the air relative to the air. Warm air can hold more water
book. you are reading.

maximum amount of water that it is possible for the air to hold at that vapour than cold air. This is why
temperature) warm air is often more humid
• atmospheric pressure (the force exerted on a surface by the weight of the than cold air.
air above it)
• presence of fog, mist, or cloud cover
A typical description of the weather on a summer day might be like this: To learn more about the work of
a high of 28 °C today, sunny with cloudy periods, probability of precipitation a meteorologist,
30 %, wind from the west at 20 km/h, and relative humidity of 40 %. GO TO NELSON SCIENCE
In some parts of the world, the weather stays more or less the same from
day to day. For example, the Sahara desert in Africa is usually hot and dry
during the day. In Canada, however, the weather can change dramatically
from one day to the next (Figure 1). The weather may be warm and sunny
today, but it could become cool and rainy tomorrow. However, you would
not expect snow in Ontario in August or a temperature of 30 °C in Nova
Scotia in February.
Career Link
The Career icon lets you know
that you can visit the Nelson
Science website to learn about
Figure 1 The weather in an area can
change dramatically in a matter of
science-related careers.
hours.
NEL 8.1 Weather and Climate 319
Sample Problems
This feature shows you how to solve numerical
problems using the GRASS method. Make sure
to check your learning by completing Practice
problems.
The Crisscross Method for Determining Formulas Naming Compounds Involving Elements with Multiple
Now that you understand the meaning of the symbols and numbers in Ionic Charges
Try This
WRITING TIP
Writing a Summary chemical formulas, try using a shortcut known as the “crisscross” method. Naming compounds containing elements with multiple ionic charges involves LEARNING TIP
Sometimes a text describes a process the same procedure as before. You must also determine the ionic charge of Specifying the Charge
or procedure, such as the Crisscross SAMPLE PROBLEM 3 Using the Crisscross Method the metal so that you can include it in the name. For example, FeCl2 is called The name of CuCl2 is written “copper(II)
Method. In your summary, organize
These are quick, fun activities

What is the chemical formula of magnesium chloride?
iron(II) chloride because the ionic charge of iron is +2. Similarly, FeCl3 is chloride.” This is read as “copper two
ideas and information in the same order chloride.” Remember that the “two”
as in the original text. called iron(III) chloride because the ionic charge of iron is +3.
Step 1 Write the symbols of the elements and their ionic charges. refers to the charge on the copper ion,
not to the number of ions of copper in
Mg2+ Cl−
designed to help you

SAMPLE PROBLEM 4 Considering Multiple Ionic Charges the compound.
Step 2 Crisscross the numbers of the ionic charges so that they now become subscripts.
Write the chemical name of CuBr2. Note that copper could have either of two ionic
Mg 2+
Cl
−
charges (Table 3).
MgCl2
understand concepts and

Step 1 As you do not know whether the charge on the copper ion is +1 or +2, use
The chemical formula of magnesium chloride is MgCl2. x to represent this unknown value. Remember that the charge on all the ions
must total zero. Each bromide ion has a charge of –1, so the total charge of
Practice bromide ions is 2(–1).
What is the chemical formula of aluminum sulfide? CuBr2
x + 2(–1) = 0
x = +2
improve your science skills.
Occasionally, this method of finding the chemical formula of a compound The ionic charge of copper in this compound is +2.
gives you an answer with two identical subscripts. For example, the chemical Step 2 Write the name of the compound. Remember that Roman numerals are
formula of aluminum nitride appears to be Al3N3. You know that the included only if the metal has more than one ionic charge.
chemical formula of an ionic compound is always the simplest possible ratio The name of CuBr2 is copper(II) bromide.
of the ions, so Al3N3 must be simplified to AlN.
Practice
Elements with Multiple Ionic Charges What is the chemical name of PbO2?
Chemists have discovered, through experiments, that there are two stable
cations of iron: Fe2+ and Fe3+. These ions are named like other cations, except Whenever you have to write the chemical name of a compound containing
that Roman numerals in rounded brackets are used to indicate the ionic charge a metal, first check whether the metal has more than one ionic charge.
Safety Precautions
(not the number of ions) of the metal. The Fe2+ ion is called “iron(II) ion,” and
the Fe3+ ion is called “iron(III) ion.” Because of this, iron may form two different T RY THIS TWO SHADES OF IRON
compounds with a particular anion. For example, there are two different SKILLS: Observing, Analyzing
SKILLS HANDBOOK
1.B., 3.B.
compounds of iron and chlorine: FeCl2 and FeCl3. Each compound has its own
Figure 3 Because iron has two
different ionic charges, it makes two
distinct properties: solid FeCl2 is light green, while FeCl3 is yellowish-brown
(Figure 3). Several other metals, besides iron, form multiple cations. In each
case, two or more compounds can be formed with the same anion (Table 3).
In this activity, you will compare the properties of the two ionic
forms of iron. To do this, you will use two different compounds of
iron: iron(III) chloride and iron(II) sulfate. The chloride and sulfate
3. Add about 100 mL of distilled water to the 250 mL flask.
4. Add the 1.0 g of iron(II) sulfate to the water in the flask.
5. Swirl to dissolve the solid. Record your observations.
Look for these warnings about
different compounds with chlorine: ions are colourless and do not react with oxygen. This means
iron(II) chloride (left) and iron(III)
chloride (right).
Table 3 Names and Multiple Ionic Charges for Common Metals
Chemical symbol Chemical symbols

that the iron ions alone are responsible for all observable colour
differences/changes.
6. Continue swirling gently for about 1 min. Compare the colour
of your solution with that of the iron(III) chloride solution.
7. Follow your teacher’s instructions for the disposal of the
potential safety hazards in
Equipment and Materials: eye protection; lab apron; 100 mL
investigations and activities.

Metal of element of ions Names of ions solutions. Clean up your work area and wash your hands.
graduated cylinder; 250 mL Erlenmeyer flask; laboratory scoop;
Cu+ copper(I) scale; weighing paper; 500 mL Erlenmeyer flask containing A. Swirling the solution allows oxygen from the atmosphere
copper Cu
Cu2+ copper(II) to enter the solution and react with the chemicals in the
iron(III) chloride solution; distilled water; 1.0 g iron(II) sulfate
Fe2+ iron(II) solution. What evidence of a chemical change did you
They will be in red print with a

iron Fe Both iron compounds are irritants. Wash any spills on the
Fe3+ iron(III) observe? K/U
Pb 2+
lead(II)
skin, in the eyes, or on clothing immediately with plenty of
lead Pb B. Suggest a possible explanation for the evidence you
Pb4+ lead(IV) cold water. Report any spills to your teacher.
observed. C
1. Put on your eye protection and lab apron.
safety icon.
Mn2+ manganese(II)
manganese Mn
Mn4+ manganese(IV) 2. Observe the solution of iron(III) chloride that your teacher has
Sn2+ tin(II) prepared. Record your observations.
tin Sn
Sn4+ tin(IV)
198 Chapter 5 • Chemicals and Their Properties NEL NEL 5.7 Names and Formulas of Ionic Compounds 199
xiv Discover Your Textbook NEL

Research This Citizen Action
These research-based activities These activities encourage
will help you relate science and you to be a good citizen and
technology to the world around you a steward of the environment
and improve your critical thinking by taking action in the world
and decision-making skills. around you.
RESEARCH THIS COMPETITION FOR THE ARCTIC CITIZEN ACTION

SKILLS: Researching, Analyzing the Issue, Communicating, Evaluating
Unit Task Bookmark

SKILLS HANDBOOK
4.A. How Can We Protect the Arctic?
As polar ice melts, many countries are beginning to see A. Which countries do you think could claim rights to natural
possibilities for profit. Rich natural resources may be available to resources found in the Arctic? Explain why. T/I A Climate change cannot be stopped entirely. The greenhouse
Aboriginal peoples to claim. In addition, new routes for shipping gases that we have already emitted will affect Earth’s climate
B. How could the melting polar ice affect shipping and
This icon lets you know that

may open up across the Arctic Ocean. for many years to come. However, the impacts of climate
transportation for Canada and other countries ? T/I
change can be reduced.
Equipment and Materials: globe; measuring tape C. (a) How much shorter would the shipping route be between Think about things you can do in your own community to
1. Using a globe, research which countries are likely to have a Vancouver and Magadan if the Arctic route could be protect the Arctic from climate change. Put your suggestions
the concepts you learned in

political or economic interest in the Arctic. used instead of the Panama Canal route? into a short article for your local newspaper or for an e-zine.
2. Measure the distance for a ship to travel from St. John’s, NL, (b) What would be the potential impact on trade between Your article should persuade others that the Arctic should be
Canada, to Magadan, Russia. Assume that the ship can travel Canada and Russia? T/I A protected. The suggestions should be practical actions that the
average citizen can do.
the section will help you to

through the Panama Canal. D. Explain why so many explorers in the past attempted to find
3. Measure the distance for a ship to travel from St. John’s to the Northwest Passage. A
Did You Know?

Magadan if there were no polar ice. E. What impacts might development of the Northwest Passage
4. Research the history of the Northwest Passage. have on traditional ways of life? A
GO TO NELSON SCIENCE complete the Unit Task.

Read interesting facts How Can Changes in the Arctic Affect the Rest
UNIT TASK Bookmark
Think about the impacts of climate change that are mentioned in this section as you work
about real-world of the World? on the Unit Task, page 444.
DID YOU KNOW? Climate change in the Arctic will have major impacts for the rest of
the world.
Climate Change Boomtown IN SUMMARY
events that relate to
The port of Churchill, Manitoba, on • Albedo effect: As Arctic ice melts, the ocean and land will reflect less of
the west coast of Hudson’s Bay, may the Sun’s energy and absorb more. As a result, the Arctic will warm up • The Intergovernmental Panel on Climate Change • Impacts of climate change will affect human society
benefit from climate change. The port
faster than it would otherwise. Energy absorbed by the Arctic surface (IPCC) has summarized the latest scientific and the natural environment, including agriculture,
is likely to see increased shipping with
will be spread around the world by the climate system.
the topics you are

the possible opening of the Northwest research on climate change. ecosystems, and the spread of pests and diseases.
Passage. Unfortunately, the reduced • Release of carbon dioxide: Earth’s permafrost may contain more stored • Changes expected around the world include • Climate change is occurring more rapidly in the
ice also means that polar bears carbon dioxide and methane than exists in the atmosphere today. The
In Summary
wander into town looking for food.
increased temperatures, shifting precipitation Arctic than anywhere else.
permafrost in Canada, Alaska, and other parts of the world has already patterns, and a rise in sea level.
learning.
• Climate change in the Arctic will have economic
started to melt. If large amounts of carbon dioxide and methane are
and ecological repercussions worldwide.
released by melting permafrost, the greenhouse effect would be further
enhanced, and Earth’s climate could change much faster than expected.
• Sea level rise: More water will flow into the oceans as the Greenland ice
sheet and glaciers in Canada, Alaska, and Russia melt.
CHECK
C YOUR LEARNING
1. Choose one of the following impact areas of climate change. 4. Why is it important to have a strong consensus among
At the end of each content
section, this quick summary
• Ocean currents: Fresh water flowing into the Arctic Ocean from • rising sea level climate scientists regarding climate change? A
• changes to agriculture 5. Explain why the melting of permafrost in the Arctic may start
melting ice may slow or even stop ocean currents that transport thermal
• changes to ecosystems another positive feedback loop that further contributes to
energy around the globe (thermohaline circulation). Ocean currents • increased spread of diseases climate change. K/U
of the main ideas will help you

affect the climate in many countries. Describe how your chosen impact could affect Earth and its
6. Climate change in the Arctic will have major impacts on the
• Biodiversity: Many migratory species have breeding grounds in the people over the next century. A
rest of the world. Choose one of the six areas below. Describe
Arctic. If the Arctic ecosystems change, this could affect species around 2. For each of the four climate change impact areas listed in in several sentences why it will be negative or positive (or
review what you learned.

the world (Figure 10). question 1, name a country that might suffer severely. Briefly both) for the rest of the world. Be prepared to share your
describe how each country would be affected. T/I
• Changes in shipping and transportation: As the polar ice cap melts, thoughts with your peers. A
ships will be able to travel through the Arctic en route to other 3. Explain how the albedo effect of polar ice means that the • albedo effect and ice • sea level rise
Figure 10 The Arctic is an important largest climate change in Canada will occur in the Arctic • release of carbon dioxide • biodiversity
habitat for many species of migratory locations. The shorter route will save thousands of kilometres and
and not in southern Ontario. You may need to refer back to • ocean currents • navigation
birds. reduce transportation costs and energy use.
Section 8.10. K/U
416 Chapter 10 • Assessing and Responding to Climate Change NEL NEL 10.2 Global Impacts of Climate Change 417
Check Your Learning

Complete these questions at the end of each
content section to make sure you understand
Magazine Features the concepts you have just learned.
Look for these special features in
each unit to learn about exciting
developments in science, cool
new technology, careers involving
science, or how science relates OSSLT Icon
to your everyday life. This icon lets you know that the
material will help you develop
literacy skills in preparation for
SCI ENCE OSSLT
Lake Agassiz: Studying Past Climate

the Ontario Secondary School
Huge sheets of ice covered much of North America during the last
ice age. When the ice age ended, most of this ice gradually melted
as Earth’s temperature began to rise. Several large lakes formed
Literacy Test.
along the southern edge of the ice sheet as it melted. The largest
of these lakes, Lake Agassiz, formed across south-central Canada
and into the United States (Figure 1). TECH ConnEct OSSLT
Hudson
Bay
Using Satellites to Monitor Earth
EW AN
Any object that orbits a larger object is called a satellite. For RADARSAT-2
example, the Moon is a natural satellite that orbits Earth. Since In December 2007, RADARSAT-2 was launched to continue
AT CH
MANITOBA 1957, humans have been launching artificial satellites to orbit monitoring the environment and natural resources. RADARSAT-2
Lake Earth. Canada was the third country to launch an artificial satellite, circles Earth every 100 minutes with a different circle each time
SCIENCE
SA SK
Agassiz after the Soviet Union and the United States (Figure 1). and revisits the same spot on Earth every 24 days. OSSLT
ONTARIO Images from RADARSAT-2 show a difference between
open water and various types of ice (Figure 2). This will make
it easier for scientists to monitor changes in Earth’s ice cover Geoengineering to Combat Climate Change?
over time.
NORTH Su pe r i or
ke Some scientists are trying to figure out ways to use technology on Farming Algae
DAKOTA MINNESOTA La
GO TO NELSON SCIENCE a global scale to address the issue of climate change. This kind of Bags, vats, or tubes of algae can be used to absorb the carbon
problem-solving is called geoengineering : the use of technology dioxide produced by power plants and other factories (Figure 3).
0 150 300 km
Figure 3 Devil’s Crater in northern Ontario is just one of the features to modify Earth’s environment. Here are just three of the many The algae can be processed into fuel.
Figure 1 Lake Agassiz, as mapped by Teller and colleagues. Lake caused by water draining from Lake Agassiz thousands of years ago. geoengineering ideas out there. Do you think they would work?
Agassiz probably held more fresh water than all the lakes in the
world do today.
Lake Agassiz and Climate Change Mirrors in Space
Research suggests that large changes in the volume of Lake Mirrors could be used to reflect some of the Sun’s radiation back
Lake Agassiz and Global Flooding Agassiz happened at about the same time as Earth’s temperature
Figure 1 The Alouette 1, launched in 1962, was Canada’s first satellite. into space to decrease Earth’s temperature (Figure 1). To balance
James T. Teller is a geologist at the decreased. Changes in Lake Agassiz could have caused abrupt Artificial satellites provide service for telephones, radio, Internet out the effect of climate change, it would take 55 000 mirrors
University of Manitoba (Figure 2). Teller Iqaluit orbiting Earth, each 100 km2 in size. Alternatively, we could
changes in Earth’s climate. How could changes in a lake’s size access, TV, and navigation. Today, many different types of artificial
and other scientists have reconstructed affect climate? Fresh water from Lake Agassiz would have poured satellites are orbiting Earth. Some examples include the following: imitate a volcano by spraying millions of tonnes of sulfur into the
the history of Lake Agassiz by examining into the North Atlantic Ocean. This fresh water may have hindered atmosphere. The sulfate droplets would act like tiny mirrors.
• Earth observation satellites that monitor environmental
ancient beaches and sediments from the flow of warm water north from the equator to the North conditions such as temperature, ice cover, forests, and
the ancient lake bottom. In 2004, Teller Atlantic. This change in water flow would have interrupted the volcanic eruptions
received the Michael J. Keen medal from northward transfer of thermal energy. These events could have • communication satellites that transmit telephone
Sun
the Geological Association of Canada for triggered a period of cooling in Europe and North America. conversations Figure 3 Farming algae
Figure 2 James T. Teller his research on Lake Agassiz. • broadcasting satellites that broadcast radio and television
Scientists believe that the volume Connections to Today’s Climate programs Risks of Geoengineering
of water in Lake Agassiz changed abruptly several times during its Today, land-based ice in the Arctic is beginning to melt. Fresh • navigational satellites that help airplanes and ships navigate There are many ways of using technology to counter climate
history (Figure 3). At those times, the ice around the lake broke, water is pouring into the Atlantic Ocean as this ice melts. Sea • weather satellites that take photographs and radar images of change. However, intentionally changing Earth’s climate system
allowing huge quantities of water to drain into the ocean. The levels are expected to rise, just as they did when Lake Agassiz weather systems could be a very bad idea. Why? Here are just a few of the reasons
additional water caused sea levels around the world to rise slightly. drained. Scientists want to know whether the flow of fresh water
why geoengineering is a big risk:
Teller believes flooding from Lake Agassiz may be the source of will interrupt ocean currents and affect world climate. Information Satellites Monitoring Climate Change
• We cannot predict all the consequences of changing Earth’s
flood stories found in the Bible, First Nation legends, and other from Lake Agassiz may help scientists determine how Earth’s RADARSAT-1 Earth mirrors
climate. A geoengineering project could have enormous side
ancient stories. climate will change over the next century. The Canadian Radio Detection and Ranging Satellite 1
effects and cause great harm. For example, sulfate droplets in
(RADARSAT-1) is one of the Canadian satellites used to conduct
Figure 1 Mirrors in space the atmosphere are known to damage the ozone layer and to
scientific research. It was launched in 1995. RADARSAT-1
RADARSAT-2 Data and Products © MacDonald, Dettwiler and Associates Ltd. (2008) Fertilizing the Oceans cause acid rain.
354 NEL monitors glaciers, polar ice caps, and permafrost, among other
- All Rights Reserved. RADARSAT is an official mark of the Canadian Space Agency. During photosynthesis, plants capture carbon dioxide from the • The projects may not work out as expected. For example,
environmental conditions. For example, images from RADARSAT-1
Figure 2 This RADARSAT-2 image shows the community of Iqaluit, atmosphere. Scientists are investigating the effects of adding research shows that dumping fertilizer into the ocean may not
are used to measure the flow of glacier ice into oceans. These next to Frobisher Bay, which is mostly covered by ice. Note the Iqaluit fertilizers to the ocean to increase algal growth (Figure 2). The result in as much carbon dioxide removal as hoped. And as
images have helped scientists determine that Earth’s ice is melting airport runway to the north of the city. The resolution is 8 m.
algae would then absorb carbon dioxide from the atmosphere. soon as you stop putting in the fertilizer, the ocean stops
at an increasing rate, raising concerns about future sea level rise.
absorbing carbon dioxide.
• Geoengineering might cause people to assume that climate
change is “being taken care of.” People might stop reducing
their emissions of greenhouse gases.
NEL 379
Geoengineering cannot fix the problems of climate change all by
itself. However, it could provide us with a backup plan if Earth’s
climate begins to change even more suddenly than expected.
GO TO NELSON SCIENCE
Figure 2 Fertilizing the oceans OSSLT
418 NEL
NEL Discover Your Textbook xv

6.7
Perform an Activity
PERFORM AN ACTIVITY
Part B: Decomposition of 16. Test the gas produced by holding a glowing
Copper(II) Carbonate splint at the mouth of the test tube (Figure 3).
Record your observations.
These are hands-on activities

7. Half-fill a test tube with limewater. Place the test
Synthesis and Decomposition Reactions SKILLS MENU
Questioning Performing
tube in the test-tube rack.
glowing splint
Hypothesizing Observing 8. Add copper(II) carbonate crystals to another test
Do you remember hearing a loud “pop” in Activity 5.2, when you held a
tube to a depth of about 2 cm.
that allow you to observe the

Predicting Analyzing
burning splint at the mouth of a test tube containing hydrogen gas? You Planning Evaluating
were hearing evidence of a synthesis reaction: Controlling Variables Communicating 9. Hold the test tube in a test-tube holder at an
angle so that the copper(II) carbonate is spread
2 H2(g) + O2(g) → 2 H2O(g) + energy gas
along the inside of the test tube.
science that you are learning. Many metals also undergo synthesis reactions with oxygen to form
oxides. In this activity, you will consider two such reactions. You
will also look at two decomposition reactions. The second one—the
10. Gently heat the underside of the test tube in the
Bunsen burner flame. Move the test tube back
and forth above the flame to evenly distribute
decomposition of hydrogen peroxide—normally occurs very slowly. the heat. Note any changes that occur. (Figure 2)
Fortunately, there are substances that speed up this reaction without
When heating the test tube, do not allow one part of the test
being consumed themselves. In this activity you will use iron(III) nitrate tube to heat up more than any other part. Doing so could
Figure 3 Glowing splint test
to help hydrogen peroxide decompose. cause the contents to be ejected from the test tube.
Analyze and Evaluate
Equipment and Materials Procedure
SKILLS HANDBOOK
copper(II) (a) What evidence suggests that chemical changes
Skills Menu
1.B., 2.E., 3.B.
carbonate crystals
• eye protection 1. Put on your eye protection and lab apron. occur when magnesium and copper are heated? K/U
test tube (b) Write the word and chemical equations for
• lab apron
Part A: Reaction of Metals test tube
the reactions that occur when magnesium
• Bunsen burner clamp
The Skills Menu in each activity • retort stand with clamps

• spark lighter
with Oxygen
2. Secure a Bunsen burner to a lab stand with a
clamp. Carefully light the Bunsen burner with a Bunsen
retort stand
and clamp
and copper are heated. (Assume that the most
common ionic charge for copper is +2.)
(c) Based on your evidence, what molecular
K/U
• tongs
lists the skills that you will use

spark lighter. burner compound is produced when copper(II)
• heat-resistant pad 3. Clean a 5 cm length of copper wire with steel carbonate is heated? What ionic compound
• 3 test tubes wool until the copper is shiny. remains? Justify your inference. T/I
Figure 2
(d) Write the word and chemical equation for the
to solve the problem or achieve
• test-tube rack 4. Hold one end of the wire with tongs. Insert the
• scoopula 11. As the reaction begins, bring the mouth of the decomposition of copper(II) carbonate.
wire into the hottest part of a Bunsen burner
K/U
limewater test tube close to the mouth of the (e) What evidence suggests that hydrogen peroxide
• test-tube holder flame for 20 to 30 s.
test tube being heated. This will allow any gases decomposed into simpler substances? Justify
the purpose of the activity.

• copper wire 5. Remove the wire from the flame and allow produced to flow into the limewater. your inference. K/U
• steel wool it to cool on the heat-resistant pad. Look for

evidence of a chemical change and record your 12. Continue heating the test tube until no further (f) Write the word and chemical equations for the
• limewater, Ca(OH)2(aq)
observations. Save the wire for Part B. changes are observed. Compare the appearance decomposition of hydrogen peroxide. Assume
• copper(II) carbonate, CuCO3(s) of the wire from Part A with the contents of the that one of the two products of this reaction is
• dilute hydrogen peroxide, H2O2(aq) 6. Look at the burning magnesium in Figure 1.
hot test tube. Record your observations. liquid water. K/U

• iron(III) nitrate, Fe(NO3)3(s) 13. Look for evidence of chemical change in the
Apply and Extend
SKILLS HANDBOOK
• wooden splint limewater. Record your observations. 3.B.
This activity involves open flames. Tie back long hair and (g) Many natural chemicals, including substances in
tuck in loose clothing.
Part C: Decomposition of liver, potatoes, and strawberries, speed up the
Hydrogen Peroxide decomposition of hydrogen peroxide. Design a
Copper(II) carbonate is toxic if swallowed.
14. Place a third test tube in the test-tube rack. Pour controlled experiment that compares how these
Limewater, hydrogen peroxide, and iron(III) nitrate are hydrogen peroxide solution into the test tube substances affect the reaction. Write your
irritants. Avoid skin and eye contact. In case of skin contact, Procedure, including safety precautions. Proceed
until it is one-third full.
wash the affected area with a lot of cool water. with the experiment once your teacher has
15. Add a small amount of iron(III) nitrate (enough
to cover the end of a wooden splint) to the approved your proposal. T/I C A
Figure 1 Magnesium burns in air.

solution. Record your observations.
244 Chapter 6 • Chemicals and Their Reactions NEL NEL 6.7 Perform an Activity 245
Skills Handbook Icon

This icon directs you to
the section of the Skills
Handbook that contains helpful
Explore an Issue
EXPLORE AN ISSUE CRITICALLY
7.7 information and tips.
Critically Minimizing Risk for a SKILLS MENU
Community
Defining the Issue Defending a
Researching Decision
Identifying Communicating
These activities allow you

An Ontario detergent manufacturer is considering Alternatives Evaluating
Analyzing the Issue
adding another shift to its production schedule at its
central Ontario plant (Figure 1). This will create 25
new jobs—great news for the nearby town with high You have been asked to present both options
to examine social and unemployment. Increased production requires more

raw materials, including concentrated sulfuric acid. The
to a meeting involving the town mayor, the local
Member of Parliament, a representative from an
challenge is how to supply the additional sulfuric acid environmental group, and the president of the
environmental issues related while minimizing the risk to the local environment. detergent company. You should outline the risks
and benefits of each option and then recommend
one of them.
to the unit. They often involve Goal

To decide which proposal best meets the needs of the
research, decision-making
community, the company, and the environment and
to recommend this decision at the meeting.
Gather Information
skills, and communication. Work in pairs or small groups to learn more about
• the manufacture of sulfuric acid
Weblink
• the hazards involved in storing and transporting
Figure 1 What is the best way to transport sulfuric acid?
sulfuric acid and sulfur
SKILLS HANDBOOK • rail accidents involving hazardous chemicals
The Issue 4.C.
When you see this weblink

• ways to minimize the risks of each option
You are a member of an independent consulting
firm hired to investigate possible solutions. In your GO TO NELSON SCIENCE
opinion, the two best options are as follows:
icon, you can visit the Nelson

Discuss the two options, comparing the risks and
• Build a small sulfuric acid production plant next
benefits of each. T/I C
to the detergent plant. The initial construction and

setup costs will be significant. The raw material
Make a Decision
for manufacturing sulfuric acid is sulfur, which is
a waste product from the smelting of nickel ore.
A nearby nickel company can supply the sulfur
Which proposal do you recommend for supplying the
detergent factory with sulfuric acid? What criteria did
Science website to learn more
you use to decide?
about the topic, watch a video,

at no cost. The company could recoup its initial
C A
investment in about five years. The sulfur would

have to be transported from the nickel smelter Communicate
by truck along the road through town. Once the Complete a report that will be presented to the
factory is in full production, large quantities of
sulfuric acid would be produced and stored on site.
meeting. The report should outline the benefits
and risks of each option and how those risks
could be minimized. It should conclude with a
do an online activity, or take
• Increase the current train shipments of sulfuric
acid to the factory from the supplier located recommendation.
a quiz.
C A
200 km away. The rail line runs near the river

that is the town’s main source of drinking water.
NEL 7.7 Explore an Issue Critically 283
6.2 CONDUCT AN INVESTIGATION
Conduct an 4. Your teacher will assign each lab group a

different volume of iron(III) nitrate solution.
Part B: Antacid Tablet in Water
11. Add 50 mL of tap water to the plastic cup.
Is Mass Gained or Lost During Pour your assigned volume of solution into the
Investigation
SKILLS MENU
12. Take an antacid tablet out of its package.
Questioning Performing small test tube.
a Chemical Reaction? Hypothesizing Observing
5. Tilt the flask and carefully slide the test tube into
13. Place the tablet and the cup of water on the scale.
Predicting Analyzing Measure and record the total mass of the cup,
During a chemical reaction, atoms, molecules, or ions collide, rearrange, Planning Evaluating it. Do not allow the test tube’s contents to spill
water, and tablet.
These experimental
Controlling Variables Communicating (Figure 1).
and form products. Word and chemical equations describe the chemical 14. Add the tablet to the water. Record your
changes that occur during a chemical reaction. observations.
15. When the visible reaction has stopped, measure
investigations are an Testable Question

How does the total mass of the products of a
Equipment and Materials
• eye protection
and record the total mass of the cup and its
contents.
opportunity for you to develop

chemical reaction compare with the total mass of • lab apron
the reactants? • test tube
(a) Calculate and record the change in mass for each
• tongs
Prediction reaction. Note whether each change resulted in a
science process skills.

• 250 mL Erlenmeyer flask and stopper Figure 1 The test tube contains iron(III) nitrate solution, and
decrease, no change, or an increase in mass. K/U
Read the Experimental Design and Procedure. Create • 10 mL graduated cylinder there is sodium hydroxide solution in the bottom of the flask.
a table similar to Table 1. In the first row of your (b) Compare your results from Part A with
• balance 6. Seal the flask with the stopper.
table, predict an answer to the Testable Question. other students’ results. Account for any
• 100 mL graduated cylinder 7. Measure and record the total mass of the flask discrepancies.
Provide a possible explanation for your Prediction. T/I
• plastic cup and its contents. (c) For Part A, calculate and record the average
Table 1 Predictions and Observations • dilute solutions of 8. Slowly tip the flask to allow the two solutions to change in mass for your class. K/U
• sodium hydroxide, NaOH(aq) mix (Figure 2).

Reaction 1 Reaction 2 (d) Compare your results from Part B with
• iron(III) nitrate, Fe(NO3)3(aq) other students’ results. Account for any
predicted mass change: decrease, no • antacid tablet discrepancies. T/I
change, or increase?
initial mass of reactants + container (g)
Iron(III) nitrate and sodium hydroxide are both corrosive, (e) Compare your results in Part A with your results
toxic, and irritants. If splashed in the eyes, sodium in Part B. Suggest a reason for the differences. T/I
final mass of products + container (g) hydroxide can cause blindness. Wash any spills on skin or
(f) For Part B, calculate and record the average
change in mass (final − initial) (g)
clothing immediately with plenty of cold water. Report any
spills to your teacher. change in mass for your class. K/U
observed change in mass: decrease, (g) Would the class results for Part B differ if the
no change, or increase?
Procedure
SKILLS HANDBOOK
1.B., 1.D., 3.B. reaction were carried out in a sealed container?
observed class results: decrease, no Figure 2 The iron(III) nitrate solution is now mixed with the Explain. T/I
change, or increase? 1. Put on your eye protection and lab apron. sodium hydroxide solution in the flask.
(h) Why would it be unsafe to conduct Part B in a
Part A: Iron(III) Nitrate 9. Measure and record the total mass of the flask sealed container? T/I
Experimental Design and Sodium Hydroxide and its contents. (i) Answer the Question posed at the beginning of
You will investigate two different chemical reactions. 10. Return the flask and all its contents to your this investigation.
2. Practise holding the empty test tube with tongs
C
For each reaction, you will measure the total mass of teacher for disposal. (j) Compare your answer in (i) with your
and sliding it into the empty Erlenmeyer flask.
reactants before the reaction. You will also measure Prediction. Account for any differences.
Seal the flask to check that the test tube fits and A
the total mass of products after the reaction. You will

that the stopper forms a tight seal.
compare the total mass of reactants with the total
mass of products. 3. Measure 5 mL of sodium hydroxide solution in
the 10 mL graduated cylinder. Pour this solution
into the flask.
228 Chapter 6 • Chemicals and Their Reactions NEL NEL 6.2 Conduct an Investigation 229
xvi Discover Your Textbook NEL

Wrap It Up What Do You Think
Now?
Think about what you learned
in the chapter and consider
CHAPTER
LOOKING BACK
whether you have changed
Key Concepts 5
KEY CONCEPTS SUMMARY W HAT DO Y O U Vocabulary your opinion by agreeing
Summary THINK NOW?
You thought about the following statements at the beginning of
physical property (p. 175)
chemical property (p. 175)
element (p. 184)
or disagreeing with the
The Key Concepts the chapter. You may have encountered these ideas in school,
at home, or in the world around you. Consider them again and
decide whether you agree or disagree with each one.
period (p. 184)
group (p. 184)
alkali metals (p. 184) statements.
Summary feature
alkaline earth metals (p. 184)
A substance’s chemical Changes can be classified as We can classify pure halogens (p. 184)
and physical properties chemical or physical. substances by observing noble gases (p. 184)
determine its usefulness
and effects. • Chemical changes involve new
their properties. Na Bohr–Rutherford diagram
outlines the main • Physical properties (for example,

state, colour, electrical conductivity)
substances being produced. (5.2)
• Evidence of chemical change
includes colour change, precipitate
• Elements can be grouped according
to their properties. (5.4)
• Metals and non-metals combine to
(p. 185)
compound (p. 186)
ion (p. 188)
ideas and skills that

involve a description of the production, release or absorption of form different kinds of compounds: cation (p. 190)
Vocabulary
substance as it is. (5.1) energy, and formation of a gas. (5.1) ionic and molecular. (5.6, 5.10) anion (p. 190)
• Chemical properties describe a • Physical change involves changes • Compounds are pure substances ionic compound (p. 192)
The label on a chemical product Elements are more reactive and more
substance’s behaviour (for example, in form (for example, state) but not that can be broken down into their 1 provides all the information you need
4 hazardous than the compounds that ionic bond (p. 192)
you learned in the

reactivity with acids, combustibility) in chemical identity. (5.1) individual elements. (5.4) electrolyte (p. 194)
to use the product safely. they form.
This feature lists all the key

as it becomes a completely different • Physical properties distinguish
Agree/disagree? Agree/disagree? polyatomic ion (p. 202)
substance(s). (5.1) molecular compounds from ionic
molecular compound (p. 206)
compounds. (5.11)
chapter. The numbers

covalent bond (p. 207)
terms you have learned and the

molecule (p. 207)
diatomic molecule (p. 207)
in brackets indicate the page number where the term

2 Recycling used motor oil is common
5 Bottled water is better for your health
section in which the

practice. than tap water.
is defined.
Ionic compounds are made up Molecular compounds Many consumer products
of positive and negative ions. are made up of distinct have been developed from
concepts were taught.

molecules. petrochemicals.
• Atoms gain or lose electrons resulting
in a stable electron arrangement, thus • The majority of all known • Product chemists select chemicals
becoming ions. (5.5) compounds are molecular. (5.10) to perform specific functions
• Positively charged ions are cations; • Molecules consist of two or more in a product. (5.10)
negatively charged ions are anions. non-metal atoms linked by a BIG Ideas
(5.5) covalent bond. (5.10)
✓ Chemicals react with
• Ionic compounds consist of cations and • Covalent bonds form when atoms
3 Pool water is a much better
6 Adding manufactured chemicals to
each other in predictable
Big Ideas
anions linked by ionic bonds. (5.6) share electrons. (5.10) conductor of electricity than the environment is a bad thing.
ways.
• Many ionic compounds are • Molecular compounds are often pure water. Agree/disagree?
electrolytes: the solutions they form named using prefixes. (5.10) Agree/disagree? Chemical reactions may
conduct electricity. (5.6) have a negative impact
The checkmark indicates which

• The names of ionic compounds formed How have your answers changed since then? on the environment, but
by two elements end in “ide.” (5.7) they can also be used to
What new understanding do you have?
• The names of compounds that address environmental
include polyatomic ions usually end challenges.
in “ate.” (5.9)
214 Chapter 5 • Chemicals and Their Properties NEL NEL Looking Back 215
Big Ideas were developed in the
chapter.
Chapter Review CHAPTER

REVIEW
9
The following icons indicate the Achievement Chart K/U Knowledge/Understanding T/I Thinking/Investigation
Complete these
category addressed by each question. Communication Application
Create and Evaluate Reflect on Your Learning
C A
16. Examine Figure 1. You saw this previously 17. In Chapter 9, you learned that increases in
in Section 9.1 (Figure 2). Consider the two carbon dioxide concentrations in the atmosphere
questions to check What Do You Remember?

1. Describe five different signs that indicate
that climate change is already affecting the
11. Describe the feedback loops illustrating the
connection between each variable below and
climate change: (9.4, 9.5) K/U
following reports:
Average Global Temperature
cause increases in global temperatures.
(a) Did you find this concept difficult to
understand? Why or why not?
0.6
your learning and environment we live in. (9.1) (a) Raising the temperature of the ocean results (b) How did your learning in Chapter 8 prepare
K/U
Temperature anomaly (°C)
2. List three Canadian sources of greenhouse in more melting of the ice. 0.4 you for this concept?
gases. (9.5) K/U
(b) Higher temperatures result in increased (c) Did you find that the evidence used to
0.2
apply your new

evaporation of moisture from the soil, support this concept was reasonable and
3. What is the connection between fossil fuels and making it more likely that forest fires convincing? Explain.
0.0
greenhouse gases? (9.4) K/U
will occur, adding carbon dioxide to the (d) What further research can you do to help
4. List three different purposes for burning fossil atmosphere. –0.2 yourself understand this concept?
knowledge from the fuels in Canada. (9.5) K/U
5. The term “anthropogenic greenhouse gases”

(c) Increasing atmospheric carbon dioxide
raises the temperature of the ocean, reducing
the amount of carbon dioxide that can be
–0.4
1880 1910 1940 1970 2000

Web Connect
includes carbon dioxide and other gases. Name
chapter.
Year 18. The National Snow Information System for
absorbed by the ocean.
three of these other gases. (9.4) K/U
Figure 1 Annual mean
Water website provides projections of what
12. (a) When two variables, such as average world
6. (a) In your own words, define “carbon sink.” • In a 2007 report, an independent researcher drew might happen to the extent of snow over
temperature and sea level, change at the
(b) Give an example of a carbon sink. a line between the temperature data points for Canada in the future. (9.2) K/U T/I
same time, does this mean that one causes

(c) Explain why carbon sinks are 1998 and for 2006 (orange line). Looking at the (a) Is snow cover increasing or decreasing in
the other? Explain.
important. (9.4, 9.5) K/U C
horizontal line, the researcher concluded that Canada?
(b) Think about several reasons or a piece of
7. List three factors that affect whether Canadian Earth stopped warming after 1998. He concluded (b) How does snow help keep Earth cool?
evidence that strongly suggests that these
forests act as a source or a sink for greenhouse that we do not have anything to worry about. (c) What effect might a reduction in snow cover
two things are related. Write an argument of
gases. (9.5) K/U
several sentences that you can use to convince • Another 2007 report drew a trend line through the have on Earth’s climate?
annual temperature data points from 1996 to 2006
Achievement
friends and family members. (9.4) K/U T/I C (d) How is this an example of a feedback loop in
What Do You Understand? (yellow line). The writers of this report concluded climate change?
8. Scientists believe that today’s climate change is 13. In Chapter 5 you learned that nitrous oxide is a that since the line of best fit had a positive slope,
harmless gas administered to dental patients. In 19. Some people refuse to believe that climate
very likely caused by human activity. Summarize Earth’s temperature increased continuously over the
Chart Icons
this chapter you learned about a different aspect change is happening, or that its effects will be
the evidence that leads scientists to this past century. Since human use of fossil fuel increased
of nitrous oxide. Comment on the description of mainly negative.
Online
T/I C A
conclusion. (9.6) K/U

continuously over the past century, we do not have
nitrous oxide as a “harmless” gas. (9.4) T/I
to consider any other factors. (9.1) TI C A
(a) Research three common arguments skeptics
9. Draw a diagram that summarizes the relationship present that disagree with the IPCC’s
All questions are between using fossil fuels for transportation and Solve a Problem (a) For each report, write a sentence or two
findings. Summarize your findings.
Quiz Icon
Earth’s global temperature. (9.4) describing a possible bias behind the report.
K/U C
14. A scientist wants to examine the relationship (b) Come up with your own replies to these
How might the bias be related to the editor’s
between sea level rise and carbon dioxide three arguments, based on the information
10. The greenhouse effect is natural and important knowledge? Belief? Values?
tagged with icons

concentrations in the atmosphere. Describe one in this book.
to life on Earth. Scientists today are concerned (b) Find an approximate trend line for other time
method the scientist could use. (9.1, 9.3)
There is an online
(c) Research responses to these three common
K/U C
about something called the “anthropogenic periods besides the ones above. Place a straight
greenhouse effect.” (9.4) 15. (a) Brainstorm with some friends to create a list arguments that have been written by climate
K/U
edge over the data points for a 10-year period
that identify the types

of extreme natural events related to climate. change experts. Summarize your findings.
(a) Distinguish between the anthropogenic (1996–2006), a 20-year period (1986–2006), a
Ask your parents and other people for (d) Compare the experts’ responses with your
study tool for each

greenhouse effect and the natural 30-year period (1976–2006), and another 30-year
additional examples. own. What new information did you learn
greenhouse effect. period (1940–1970). What do you conclude about
(b) Which, if any, of the events on your list had from the experts’ responses?
of knowledge and
(b) Explain why scientists consider the each time period?
anthropogenic greenhouse effect to be positive impacts?
chapter on the Nelson

(c) How would you interpret the reports summarized
a problem. (c) Outline what kind of research you could do
above?
to find out if extreme events have increased
skills you must use to in frequency and/or intensity over the past (d) If you were asked to draw your own line of best To do an online self-quiz or for all
fit, would it be more similar to the orange line or other Nelson Web Connections,
Science website.
50 years where you live. (9.1) T/I A
the yellow line?
answer the question.

398 Chapter 9 • Earth’s Climate: Out of Balance NEL NEL Chapter 9 Review 399
CHAPTER
SELF-QUIZ
10
category addressed by each question. C Communication A Application
15. Describe a series of global events that connect 20. Explain how the planting of trees can reduce the
Chapter
fossil-fuel-driven transportation activities to impact of climate change. Be sure to include the
the rise of sea level that could flood low-lying cause-and-effect steps between the act of planting
For each question, select the best answer from the four 6. Which of the following is likely to be a positive islands and coastal areas. (10.2) T/I trees and the effect on climate. (10.5) K/U A
alternatives. effect of rising global temperatures? (10.2)
Self-Quiz
16. Most scientists agree that humans must rapidly
K/U
21. Figure 1 shows glaciers on the sides of
1. What is one reason that that explains why (a) fewer crop pests reduce their dependence on fossil fuels and mountains in the Canadian Rockies. (10.2) A
scientists have trouble making exact projections (b) higher lake levels convert to energy sources that do not emit
about the rate of climate change? (10.3) K/U (c) longer growing season greenhouse gases. Some people think all nations
The Chapter Self-Quiz

(d) less spread of tropical diseases should cut back emissions by the same percentage.
(a) It is difficult to determine the relative
amounts of atmospheric gases. However, given that switching to alternative
Indicate whether each of the statements is true or false. If
(b) It is difficult to measure how the energy energy sources will be expensive, other people
you think the statement is false, rewrite it to make it true.
is a helpful tool for

radiated by the Sun varies over time. think that developing nations should not have to
(c) It is difficult to predict how quickly people 7. If nations drastically reduce greenhouse gas change their energy usage as much as the more
will switch from fossil fuels to other energy emissions, global temperatures will immediately industrialized nations. Write a short paragraph
sources. stop rising. (10.4) K/U
supporting one of these viewpoints. (10.4)
you to make sure you

K/U C
(d) It is difficult to calculate how much carbon 8. The rate of climate change can be reduced by 17. The warming of Canada’s far north and the Arctic
dioxide is produced by the burning of fossil relying less on power plants that burn fossil fuels Ocean may lead to the following changes: Figure 1
fuels. and more on nuclear power plants. (10.1) • less sea ice
understand all the
K/U
2. Which of the following is most likely to be a direct (a) Describe how climate change is likely to
• habitat loss for some species
Copy each of the following statements into your notebook. change the appearance of these glaciers.
result of rising global temperatures? (10.2) K/U
• rising sea level
Fill in the blanks with a word or phrase that correctly (b) Describe one global effect produced by the
(a) more sea ice (c) more freshwater • melting permafrost
concepts you learned

completes the sentence.
melting of these glaciers.
(b) more forest fires (d) more biodiversity • growth of trees farther north
9. The ___________ has summarized the latest 22. The area of the Arctic Ocean covered by sea
3. Which of the following projections best describes research on climate change. (10.2) • more open water for shipping
ice is decreasing at an accelerating rate because
K/U
how climate change may affect precipitation? • lowering of heating costs
in the chapter. (10.2) K/U
(a) Climate change will cause the patterns of

10. Carbon dioxide and methane will be released
into the atmosphere by melting ___________
in the Arctic. (10.2) K/U
Write a short paragraph explaining whether you
think these changes will be an overall benefit or
open water absorbs more solar energy than ice
does. Imagine you are a climatologist beginning
to create a computer model that will predict
precipitation to vary. problem for Canada. (10.2) T/I
changes in Arctic sea ice. Describe two physical
(b) Climate change will increase precipitation 11. To make climate ___________, scientists
18. Imagine you are planning a survey of local properties you would need to know in order to
everywhere. develop ___________ which specify the amount
businesses that advertise themselves as “green.” begin calculations for your model. (10.1) T/I
(c) Climate change will decrease precipitation of greenhouse gases produced. (10.1) K/U
Make a list of three questions you would ask the
everywhere. 23. Identify two ways in which you add to
Match each effect of climate change on the left with the
business owners to help you evaluate just how
(d) Climate change will increase snowfall and atmospheric carbon dioxide or other greenhouse
region most likely to be affected on the right. green their businesses are. (10.4, 10.5) C
decrease rainfall. gases while at home. Explain how each of these

12. (a) forest fires (i) Canada 19. A certain species of migratory songbird that once activities leads to the release of greenhouse gases.
4. Which of these has been proposed as a way (b) species loss (ii) Pacific islands spent its summers in southern Ontario has not In each case, explain how you could reduce the
to absorb excess carbon dioxide from the (c) sea level rise (iii) northern Africa been seen there for several years. (10.3) T/I
amount of greenhouse gas emissions. (10.5) A
atmosphere? (10.5) K/U

(d) expanding deserts (iv) Amazon rainforest (a) State a hypothesis that could explain
(a) fish farms (c) cattle herds (e) increasing storm (v) United States Gulf 24. Describe three ways that people can change their
the birds’ disappearance based on your
(b) large reservoirs (d) reforestation intensity Coast (10.2) shopping habits and dietary choices to reduce
K/U
understanding of climate change.
greenhouse gas emissions. In each case, explain
5. Approximately what fraction of Ontario’s (b) How would you go about testing this
Write a short answer to each of these questions. how the change reduces emissions. (10.5) A
greenhouse gas emissions are caused by the hypothesis?

activities of individuals? (10.5) K/U 13. Describe two ways in which planting grass on 25. Describe the role of the Intergovernmental Panel
(a) 10 % (c) 75 % a roof can reduce greenhouse gases. (10.5) K/U
on Climate Change (IPCC). (10.1) K/U
(b) 30 % (d) 85 % 14. Describe the relationship between global

population and climate change. (10.1) K/U
440 Chapter 10 • Assessing and Responding to Climate Change NEL NEL Chapter 10 Self-Quiz 441
NEL Discover Your Textbook xvii

UNIT
LOOKING BACK
Master D
MAKE A SUMMARY
Make a Summary
UNIT D
Concept Map Climate Change

Imagine a doctor’s waiting room, with Earth waiting its turn. Here is how a doctor–patient conversation might go:
[DOCTOR] So, I hear you’re not feeling well. Can you describe 1. List the evidence for climate change contained in the
Summarize what you
This feature brings
your symptoms for me? dialogue between Earth and the doctor. K/U
[EARTH] I just don’t feel right. My sea level has been rising
for at least a hundred years—and it’s been rising
2. Write some more dialogue. (For example, have any symptoms
been missed? What is causing the rise in temperature? Why
is this cause happening? What can be done about Earth’s
have learned in the unit
faster in the last few years. As you can imagine, I’ve
together the Key CHAPTER 8 CHAPTER 9 CHAPTER 10

[DOCTOR]
had quite a lot of flooding. More of my ice has been
melting than usual. Do you think it’s connected?
Very likely. Do you have any swelling in your oceans?
problem? What is already being done?) T/I C
3. Present your completed dialogue in the form of a cartoon, a
dramatic presentation, or an FAQ on a web page. C
by completing the Make a
Earth’s Climate Earth’s Climate: Assessing and
Concepts from each Summary activity.
Are you feeling any thermal expansion?
System and Out of Balance Responding to [EARTH] Yes, I have noticed that my oceans seem to be
Natural Changes Climate Change expanding.
chapter to summarize
[DOCTOR] Hmm, yes. Ice melting, thermal expansion—that
would explain the sea level rise.
KEY CONCEPTS KEY CONCEPTS KEY CONCEPTS [EARTH] Speaking of oceans, I’ve been having a lot of trouble
with hurricanes. I always have hurricanes, of course,
all the main ideas in Earth’s climate

system is powered
by the Sun.
We have evidence
that our climate is
changing.
The impacts of
climate change
will affect our
[DOCTOR]
but they seem to be getting worse.
Warmer ocean waters can increase the strength of
hurricanes. Let me examine you. I see a patch of
the unit.
Earth’s climate Human activities environment desert forming here. Is that new?
system includes have increased and society.
[EARTH] Yes, it is.
the atmosphere, atmospheric levels of Impacts of climate
the hydrosphere, greenhouse gases. change will be felt [DOCTOR] It says here in your medical history that your seasons
the lithosphere, and the most in the have been changing lately. What else? Plants and
The increase in animals migrating toward the poles—I think I know
living things. greenhouse gases Arctic.
what’s happening here. Here’s a thermometer. I’m
The greenhouse is causing the Climate change in just going to take your temperature.
Career Links
effect keeps Earth anthropogenic Ontario is expected [DOCTOR EXAMINES THERMOMETER]
warm by trapping (human-caused) to bring warmer Just as I thought. Your temperature is rising.
thermal energy greenhouse effect. winters and hotter
radiated by Earth. The anthropogenic summers. © 2007. Dan Piraro. King Features Syndicate
Make connections between

Thermal energy is greenhouse effect Current initiatives
transferred within is the main cause will not prevent
Earth’s climate of today’s climate serious negative
system through air change. effects from climate CAREER LINKS
and ocean currents.
Earth’s climate
experiences long-
The largest sources
of greenhouse gases
in Canada are the
change.
Greenhouse gas
emissions must be
List the careers mentioned in this unit. Choose two of the careers that interest you
or choose two other careers that relate to climate change. For each of these careers,
what you learned in the
research the following information:
unit and future careers by

term and short-term production and reduced by 80 %
changes. burning of fossil by 2050 to avoid • educational requirements (secondary and • potential employers
fuels. the most serious post-secondary) • salary
Scientists use
impacts. • skill/personality/aptitude requirements • duties/responsibilities
natural ice cores, Scientists use climate
sediment layers,
fossils, and tree
rings to study past
models to figure out
how different factors
affect our climate.
Switching to clean
energy sources is
essential to reduce
Use the information you have assembled to create a brochure. Your brochure should
compare your two chosen careers and explain how they connect to climate change.
completing the Career Links
activity.
climates. GHG emissions.
442 Unit D • Climate Change NEL NEL Looking Back 443
Unit Task
Demonstrate the skills and
knowledge you developed in UNIT
D
UNIT TASK
4. Review the information about global climate • What steps have already been taken by local
change in this unit. What impacts of climate government, businesses, and individuals to adapt
the unit by completing the Global Climate Change SKILLS MENU

change do you expect to occur in this region
over the next 100 years? Make a list of projected
to climate change?
• How can the local government, businesses, and
Defining the Issue Defending a changes for the region. individuals adapt to coming changes in climate?
challenge described in the The Issue

The Intergovernmental Panel on Climate Change
Researching
Identifying
Alternatives
Decision
Communicating
Evaluating
5. Research impacts of climate change in the
region. For example, look for changes in any of Make a Decision
SKILLS HANDBOOK
4.C.5.
(IPCC) is preparing an update to its previous
Analyzing the Issue the following factors. What would be the most practical solution(s) for the
Unit Task. reports on global climate change. The update will

include recommendations for actions. You are • Peru
• Bangladesh
• changes in river flow, ice cover, flooding,
and/or rainfall
people in this region, given what you have learned
about the region?
volunteering your expertise to contribute to these • changes to local ecosystems and/or species
Communicate
SKILLS HANDBOOK
recommendations. The panel’s findings will be • Southeastern coast of Australia • changes in severe weather patterns 4.C.6., 4.C.7.
presented at an international conference. • Uganda (Figure 2) (e.g., hurricanes, monsoons) Present your research at an international conference
Assessment
• a different location (with the permission of • unusual heat waves or droughts (i.e., with your classmates). In your presentation,
Goal your teacher) • changes in agricultural land include the following:
To collect climate information about a specific region, • a comparison of the climate 50 years ago and
• changes in the occurrence of insect-borne
Checklist
to use the information collected to identify any today
impacts of climate change, and to suggest specific diseases (such as malaria, dengue fever, West
Nile virus, Lyme disease) • climate-related changes that are already occurring
steps toward mitigation.
6. Research social and economic data for the • a projection of expected climate-related impacts
This checklist lists

SKILLS HANDBOOK
in the region over the next 100 years
Gather Information 4.A., 4.B., 6.A. region. For example, look for the following
factors: • the most appropriate steps for mitigation and
Skills Menu
1. Choose a location such as one of the following
locations to research: • relative wealth or poverty of people in the adaptation for local government, businesses, and
the criteria that your

region individuals
• Churchill, Manitoba, Canada (Figure 1)
• traditional or cultural activities in the region Your presentation could be an in-person speech, a
The Skills Menu identifies the • access to scientific information and/or

video, a poster presentation, or a written submission.
Figure 2 Uganda
2. Research the climate of the location you
technologies in the region
7. Compare your list of projected impacts from
ASSESSMENT CHECKLIST
teacher will use to
skills you will use to complete
Your completed Performance Task will be
have chosen. Collect data (both current and, Step 4 with the impacts you identified from your evaluated according to how well you are able to
evaluate your work

if possible, from about 50 years ago) on the research in Step 5. Are any of your projected
Knowledge/Understanding
following: impacts already occurring?
the Unit Task.

✔ Thoroughly research and analyze the data.
• average monthly and yearly temperatures 8. Write a one-page summary of your report of
Thinking/Inquiry
on the Unit Task.

• average monthly and yearly precipitation observations from Steps 5 to 7.
✔ Plan and develop a clear search strategy for climate data.
• an estimate of how much precipitation falls as ✔ Record the data in an organized fashion.
Identify Solutions
SKILLS HANDBOOK
snow versus rain 4.C.3., 4.C.4. ✔ Compare projected impacts with actual impacts.
Figure 1 Churchhill, Manitoba

• severe weather patterns (e.g., storms,
hurricanes, yearly monsoons, seasonal floods,
droughts, heat waves)
Brainstorm a list of practical steps that people in the
region can take to mitigate or adapt to climate-related
changes. Consider these questions when generating
✔ Identify potential solutions.
Communication
✔ Clearly present data in a table or graph.
Read this list carefully
before completing the
• amounts of permanent ice or frozen soil your suggestions for the region: ✔ Prepare and present your current and projected climate-
• Vancouver, British Columbia, Canada
(glaciers, permafrost) • What major aspects of life in that region would related impacts in an organized manner.
• Whitehorse, Yukon, Canada
• extent and duration of ice cover on lakes in be affected by climate change? Application
• Baffin Island, Nunavut, Canada
winter • How can people in the region reduce their
task.
✔ Make recommendations on how to limit and prepare for
• Tuvalu emissions of greenhouse gases and/or reduce local and global climate change.
3. Analyze and present your data using tables and
• France graphs. Note any recent changes in climate that deforestation in the region? ✔ Demonstrate an understanding of natural and human
factors that influence climate in this region.
• United Kingdom you observe.
444 Unit D • Climate Change NEL NEL Unit D Task 445
Unit Review
UNIT
REVIEW
D
The following icons indicate the Achievement Chart K/U Knowledge/Understanding T/ I Thinking/Investigation
11. Which of the following statements correctly 14. Which statement correctly describes what
explains how greenhouse gases affect Earth’s happens to energy from the Sun once it reaches
Complete the Unit

temperature? (8.6) K/U
Earth? (8.3) K/U
What Do You Remember? 6. Scientists use proxy records to help them study (a) Greenhouse gases act as a protective layer in (a) Earth’s surface absorbs about half of the total
past climates. Proxy records include Earth’s atmosphere by reflecting most of the energy and re-radiates it as infrared energy.
For each question, select the best answer from the four
Review questions to alternatives. (a) tree rings. incoming solar radiation. (b) Earth’s atmosphere reflects about half of the
(b) atmospheric weather records. (b) Greenhouse gases keep Earth cool by energy back to space.
1. What is the difference between weather and
(c) oceanic temperature measurements. removing moisture from the atmosphere (c) Earth’s forests absorb about half of the total
climate? (8.1) K/U
(d) satellite observations of polar ice cover. (8.11) that would otherwise increase Earth’s energy, converting it into chemical energy.
check your learning of

K/U
(a) Weather refers to wind and precipitation, temperature. (d) Earth’s oceans absorb about half of the total
whereas climate refers to the temperature of 7. Long-term natural changes in Earth’s climate
(c) Greenhouse gases absorb infrared radiation energy, causing them to warm up.
a region. over the past 400 000 years have most likely been
emitted by Earth’s surface and emit about
caused by
all the concepts and
(b) Weather happens on a daily basis, whereas half of this radiation back toward Earth’s Indicate whether each of the statements is TRUE or FALSE. If
climate is the average of weather over long (a) changes in the total amount of ice and water surface. you think the statement is false, rewrite it to make it true.
periods of time. on Earth. (d) Greenhouse gases absorb ultraviolet
(c) Weather changes slowly, whereas climate (b) changes in Earth’s orbit and in the angle of 15. A location’s climate is affected by factors such as
skills in the unit.

radiation from the Sun, convert it to infrared distance from the equator, height above sea level,
changes quickly. its axis. radiation, and emit almost all of this
(d) Weather happens only over land, whereas (c) a decrease in the number of animals on and nearby bodies of water. (8.3, 8.4) K/U
radiation back into space.

climate happens over both the land and the Earth. 16. Ozone is harmful to life on Earth when it is high
(d) a decrease in the amount of oxygen in Earth’s 12. Which of the following is an example of thermal
ocean. up in the stratosphere and helpful when it is at
atmosphere. (8.9) expansion? (9.1, 9.3) K/U
ground level, in the troposphere. (8.4)

K/U
2. Which list includes all the key components of K/U
(a) Water increases in volume as its temperature

Earth’s climate system? (8.4) K/U 8. Which of the following is NOT evidence of
increases. 17. Earth absorbs much more energy from the Sun
(a) water, land, and living things current climate change? (9.1) K/U
(b) More salt dissolves in sea water as the water than it releases. (8.3) K/U
(b) air, water, ice, and land (a) rising average world temperatures travels to the poles.
(c) air, water, ice, and living things (b) rising sea levels 18. Gases in Earth’s atmosphere trap infrared
(c) Human activity has increased the amount of
(d) air, water, ice, land, and living things (c) increasing water pollution radiation from Earth and thus keep our climate
greenhouse gases in the atmosphere.
(d) decreasing Arctic ice cover warmer than it would otherwise be. (8.3) K/U
3. The hydrosphere is made up of (d) As global temperatures increase, organisms

(a) all living things and their habitats. 9. What is the most likely cause of current climate that carry disease may move farther north. 19. Earth’s climate changes naturally over very long
(b) all land on Earth’s surface. change? (9.4) K/U
13. Which of the following correctly describes an El periods of time. (8.9) K/U
(c) all frozen water on Earth. (a) melting ice at the poles Niño event? (8.9) K/U
20. Increases in global temperatures are caused by
(d) all water on Earth. (8.4) K/U (b) changes in solar radiation (a) Over time, the movement of Earth’s landmass damage to the ozone layer. (8.4) K/U
(c) volcanic eruptions produced today’s continents from one large

4. Which of the following mechanisms is NOT
(d) human emissions of greenhouse gases 21. Deforestation is a problem because cutting
significant in transferring thermal energy across supercontinent.
down forests releases carbon dioxide into the
Earth’s surface? (8.8) K/U 10. Which of the following actions is mainly (b) The vibration of atoms in certain molecules
atmosphere and prevents the absorption of
(a) air convection currents your responsibility and NOT that of your allows these molecules to absorb different
carbon dioxide. (9.4) K/U
(b) heat conduction through land masses municipality, the province of Ontario, or the types of energy from the Sun.
(c) the thermohaline circulation in the ocean government of Canada? (10.5) K/U
(c) The prevailing winds in the Pacific Ocean 22. CFCs are greenhouse gases. (9.4) K/U
(d) the Gulf Stream (a) support international treaties to reduce temporarily switch direction and push warm
water east, toward South America. 23. Most greenhouse gases in Canada are produced
carbon dioxide emissions
5. Which gases are the principal contributors to the (d) Clouds form at low altitudes where they can by household electricity use. (9.5) K/U
(b) collect methane from landfills for use as

natural greenhouse effect? (8.6) K/U
trap thermal energy near Earth’s surface,
energy 24. The leeward side of a mountain range receives
(a) carbon dioxide, methane, water vapour (c) change the power source of electricity- increasing Earth’s temperature. less precipitation than the windward side of the
(b) carbon dioxide, methane, oxygen generating stations away from coal mountain range. (8.4) K/U
(c) carbon dioxide, water vapour, oxygen (d) change transportation habits so that we
(d) argon, carbon dioxide, methane walk, bicycle, and use public transit more
frequently
446 Unit D • Climate Change NEL NEL Unit D Review 447
xviii Discover Your Textbook NEL

UNIT
Unit Self-Quiz D
SELF-QUIZ The following icons indicate the Achievement Chart Knowledge/Understanding Thinking/Investigation
K/U T/I

Write a short answer to each of these questions. 22. This unit suggested several ways to conserve
12. Why would you expect a cloudy, summer night energy and reduce your greenhouse gas
The Unit Self-Quiz is an to be warmer than a cloudless, summer night? emissions. Write down at least two other items
For each question, select the best answer from the four Copy each of the following statements into your notebook. Fill (8.8) K/U you could add to these suggestions. Explain why
alternatives. in the blanks with a word or phrase that correctly completes these items should be included. (10.5) A
1. In which of the following would you expect the sentence. 13. You decide to keep a record of the high and
opportunity for you to make low temperatures in your town for the next two 23. Climate affects how we live and what activities
convection currents to form? (8.8) K/U
8. Grass has a higher albedo than dark-coloured weeks. What kind of research could you do to we can undertake. (8.1) T/I
(a) soil soil. Therefore, grass ________ more sunlight find how the local temperatures from 50 years (a) Describe at least two ways in which the
(b) rock than does dark soil. (8.10)
sure that you understand all the

K/U
ago compare to the data you collect? (8.1) K/U T/I
climate in your region affects the way
(c) air
9. Geothermal energy and hydroelectric power are 14. The Sun radiates energy onto all areas of Earth’s you live.
(d) ice
considered clean energy sources because they do surface. Explain two reasons why the climate (b) Choose another region of Canada. How
2. Which of the following is a factor in causing not produce ________ . (10.1) would the climate in that region affect the
main ideas from the unit.

at Earth’s poles is colder than the climate at the
K/U
short-term variations in climate? (8.9) K/U

two things you described in part (a)?
equator. (8.3, 8.4) K/U
(a) continental drift Match each term on the left with the most appropriate 24. Earth’s surface is made up of more water than
(b) volcanic eruptions 15. Explain how the processes of evaporation and
description on the right. land. Predict what influence it would have on
(c) the shape of Earth’s orbit condensation move energy from one place to
Earth’s climate if Earth’s surface contained more
10. (a) climate (i) graphs showing another. (8.4, 8.8) K/U
(d) ozone in the stratosphere land than water. (8.4, 8.9) T/I
projection temperature and moisture

3. Which of the following is an example of a proxy 16. Predict how Earth’s average temperature would
(b) bioclimate conditions at a specific 25. Do you think that Canada should have agreed to
record? (8.11) change if Earth had no atmosphere. Explain your
K/U
profile location join the Kyoto Protocol? Write a short argument
prediction. (8.4) T/I
(a) data collected from tree rings (c) climate (ii) average of the explaining your opinion. (10.4) A C
(b) a recent photo of a glacier in the Arctic system weather in a region over a 17. Describe an example of a positive feedback loop
26. This unit introduced many new concepts about
(c) a graph showing rainfall amounts in 1990 (d) climate long period of time in daily life. (8.10) A
climate change. T/I
(d) the weather forecast from yesterday’s (iii) global conditions 18. Explain how the disappearance of glaciers would
newspaper produced by the interactions (a) Which concept in this unit did you find
affect some people in China. (10.2) T/I
difficult to understand? Why?
4. Which of the following is a source of methane between Earth’s air, land,
liquid water, ice, and living 19. Predict at least two ways in which climate change (b) What further research can you do to help
emissions? (8.6, 9.4) K/U
you better understand this concept?
things will impact your life. (10.2, 10.3) T/I
(a) nitrogen fertilizers 27. In this unit, you learned that ozone can be
(iv) reasonable scientific 20. You are writing an article for your school
(b) aerosol spray cans helpful or harmful to life on Earth, depending on
estimate of a region’s newspaper about how your community is
(c) cattle ranching its location in the atmosphere. You also learned
future temperature and preparing for the impacts of climate change. To
(d) photosynthesis in plants that the greenhouse effect is essential to life on
precipitation conditions collect information for your article, you have
(8.2, 8.4, 10.1) K/U
scheduled an interview with a local official. List Earth, but the anthropogenic greenhouse effect
Indicate whether each of the statements is TRUE or FALSE. If may be harmful. K/U A
you think the statement is false, rewrite it to make it true. 11. (a) carbon (i) A gas that forms in the at least three questions you will ask the official
dioxide atmosphere as lakes and during the interview. C (a) Write a general statement describing the
5. Prevailing winds that come from the North Pole pattern contained in this information.
(b) methane rivers evaporate. 21. Describe how the shrinking of Arctic ice could
will tend to make the regions they pass over (b) Have you ever observed a similar pattern
(c) water (ii) A gas that exists naturally in affect
receive large amounts of precipitation. (8.8) K/U
anywhere else in real life?
vapour the stratosphere.
6. Melting icebergs will cause a great rise in sea (a) animals such as polar bears and seals that
(d) nitrous (iii) A gas released into the
levels. (9.1) live there
K/U
oxide atmosphere from certain
(b) global climate (10.2) T/I
7. The natural greenhouse effect is necessary for life (e) ozone fertilizers.
to exist on Earth. (8.6) K/U (iv) A gas given off when fossil
fuels are burned.
(v) A gas produced by cattle
during their digestive
process. (9.4) K/U
452 Unit D • Climate Change NEL NEL Unit D Self-Quiz 453
Skills Handbook
The Skills Handbook is your Skills
APPENDIX A
Handbook
resource for useful science
skills and information. It is
divided into numbered sections. CONTENTS
1. Safe Science 5. Using Mathematics in
Whenever you see a Skills 1.A. Having a Safe Attitude . . . . .600

1.B. Specific Safety Hazards . . . .601
1.C. Accidents Can Happen . . . . .602
Science
5.A. SI Units . . . . . . . . . . . . . . .624
5.B. Solving Numerical Problems
Handbook Icon, it will direct you 1.D. Safety Conventions and Using the GRASS Method . . 626
Symbols . . . . . . . . . . . . . . .602 5.C. Scientific Notation . . . . . . . 626
5.D. Uncertainty in Measurement . .628
2. Scientific Tools and
5.E. Using the Calculator . . . . . . 631
to the relevant section of the

Equipment
5.F. Working with Angles . . . . . . 633
2.A. Working with Dissecting
Equipment . . . . . . . . . . . . . .604 6. Data Tables and Graphs
2.B. Testing for Electrical
Skills Handbook.
6.A. Graphing Data . . . . . . . . . .634
Conductivity . . . . . . . . . . . . .604 6.B. Using Computers for
2.C. Using the pH Meter . . . . . . .604 Graphing . . . . . . . . . . . . . .636
2.D. Using the Microscope . . . . .605 6.C. Interpreting Graphs . . . . . .636
2.E. Using Other Scientific
Equipment . . . . . . . . . . . . . .608 7. Study Skills
7.A. Working Together . . . . . . .637
3. Scientific Inquiry Skills 7.B. Setting Goals and Monitoring
3.A. Thinking as a Scientist . . . .610 Progress . . . . . . . . . . . . . .638
3.B. Scientific Inquiry . . . . . . . . .610 7.C. Good Study Habits. . . . . . .640
4. Research Skills 8. Literacy
4.A. General Research 8.A. Reading Strategies . . . . . .641
Skills . . . . . . . . . . . . . . . . . .618 8.B. Graphic Organizers . . . . . .642
4.B. Using the Internet . . . . . . . .619
4.C. Exploring an Issue 9. Latin and Greek Root Words
Critically . . . . . . . . . . . . . . .620
10. Periodic Table
598 Skills Handbook NEL

NEL NEL
NEL Contents 599
Glossary
Glossary
A anaphase [AN-uh-fayz] the third B
accommodation the changing of
shape of the eye lens by eye muscles to
phase of mitosis, in which the sister
chromatids separate into daughter
chromosomes, and each moves toward
base an aqueous solution that
conducts electricity and turns red
This is a list of all
allow a sharply focused image to form opposite ends of the cells (p. 42) litmus blue (p. 270)
on the retina (p. 574)
acid an aqueous solution that
conducts electricity, tastes sour, turns
angle of incidence the angle between
the incident ray and the normal (p. 481)
benign tumour a tumour that does
not affect surrounding tissues other
than by physically crowding them
the key terms in
the textbook in
blue litmus red, and neutralizes bases angle of reflection the angle between (p. 48)
(p. 268) the reflected ray and the normal
(p. 481) bioclimate profile a graphical
acid−base indicator a substance that representation of current and future
angle of refraction the angle between
alphabetical order,
changes colour depending on whether climate data from a specific location
it is in an acid or a base (p. 270) the refracted ray and the normal (p. 323)
(p. 516)
acid leaching the process of removing bioluminescence [BYE-o-loo-muh-
heavy metals from contaminated soils anion [AN-eye-awn] a negatively NES-ens] the production of light
by adding an acid solution to the soil
and catching the solution that drains
through (p. 274)
charged ion (p. 190)
anthropogenic [AN-thruh-puh-JEN-
ik] resulting from a human influence
in living organisms as the result of a
chemical reaction with little or no heat
produced (p. 475)
along with their
acid precipitation any precipitation
(e.g., rain, dew, hail) with a pH less
than the normal pH of rain, which is
(p. 384)
anthropogenic greenhouse effect the
increase in the amount of lower-energy
biophotonics [BYE-o-fo-TAW-
niks] the technology of using light
energy to diagnose, monitor, and treat
definitions. Use the
Glossary to check your
approximately 5.6 (p. 285) infrared radiation trapped by the living cells and organisms (p. 55)
albedo [al-BEE-do] a measure of how atmosphere as a result of higher levels Bohr−Rutherford diagram a model
much of the Sun’s radiation is reflected of greenhouse gases in the atmosphere representing the arrangement of
by a surface (p. 355) due to human activities, which is electrons in orbits around the nucleus
albedo effect [al-BEE-do uh-fekt]
the positive feedback loop in which
leading to an increase in Earth’s average
global temperature (p. 387)
apical meristem [AY-puh-kuhl MEH-
of an atom (p. 185)
buffering capacity the ability of a
understanding of any
an increase in Earth’s temperature substance to resist changes in pH
key terms you may

causes ice to melt, so more radiation is ruh-stem] undifferentiated cells at (p. 288)
absorbed by Earth’s surface, leading to the tips of plant roots and shoots; cells
further increases in temperature that divide, enabling the plant to grow
(p. 356) longer and develop specialized tissues C
alkali metals the elements (except
hydrogen) in the first column of the
(p. 143)
apparent depth the depth that an
object appears to be at, due to the
cancer a broad group of diseases that
result in uncontrolled cell division
(p. 48)
need to review.
periodic table (Group 1) (p. 184)
refraction of light in a transparent capillary a tiny, thin-walled blood
alkaline earth metals the elements in medium (p. 535) vessel that enables the exchange of
the second column of the periodic table
artery a thick-walled blood vessel gases, nutrients, and wastes between the
(Group 2) (p. 184)
that carries blood away from the heart blood and the body tissues (p. 84)
alveolus [al-vee-O-luhs] (plural: (p. 84) carbon sink a reservoir, such as an
alveoli [al-vee-O-lye]) tiny sac of air
asexual reproduction the process ocean or a forest, that absorbs carbon
in the lungs that is surrounded by
of producing offspring from only one dioxide from the atmosphere and stores
a network of capillaries; where gas
parent; the production of offspring that the carbon in another form (p. 339)
exchange takes place between air and
blood (p. 92) are genetically identical to the parent carcinogen [kahr-SIN-uh-juhn] any
(p. 36) environmental factor that causes cancer
atmosphere the layers of gases (p. 49)
surrounding Earth (p. 330)
NEL Glossary 667
NEL Discover Your Textbook xix

Safe Science
Workplace Hazardous Materials Information System (WHMIS) Hazardous Household Product Symbols (HHPS)
compressed dangerously Symbol Danger

gas reactive material Explosive
This container can explode if it is
flammable and heated or punctured.
biohazardous
combustible
infectious material
material Corrosive
poisonous and This product will burn skin or eyes on contact,
infectious material or throat and stomach if swallowed.
oxidizing
causing immediate
material Flammable
and serious toxic
effects This product, or its fumes, will catch fire easily
if exposed to heat, flames, or sparks.
poisonous and
corrosive infectious material Poisonous
material causing other Licking, eating, drinking, or sometimes smelling,
toxic effects this product is likely to cause illness or death.
Practise Safe Science in the Classroom
Be science ready. Follow instructions. Act responsibly.
• Come prepared with your textbook, • Do not enter a laboratory unless • Pay attention to your own safety and
notebook, pencil, and anything else a teacher is present, or you have the safety of others.
you need. CSH-F01-SHOS10SB.ai permission to do so.
• Know the location of MSDS (Material
• Tell your teacher about any allergies • Listen to your teacher’s directions. Safety Data Sheet) information,
or medical problems. Read written instructions. Follow exits, and all safety equipment, such
them carefully. as the first aid kit, fire blanket, fire
• Keep yourself and your work area tidy
extinguisher, and eyewash station.
and clean. Keep aisles clear. • Ask your teacher for directions if you
are not sure what to do. • Alert your teacher immediately if you
• Keep your clothing and hair out of
see a safety hazard, such as broken
the way. Roll up your sleeves, tuck • Wear eye protection or other safety
glass, a spill, or unsafe behaviour.
in loose clothing, and tie back loose equipment when instructed by your
hair. Remove any loose jewellery. teacher. • Stand while handling equipment and
materials.
• Wear closed shoes (not sandals). • Never change anything, or start an
activity or investigation on your own, • Avoid sudden or rapid motion in the
• Do not wear contact lenses while
without your teacher’s approval. laboratory, especially near chemicals
doing investigations.
• Get your teacher’s approval before or sharp instruments.
• Read all written instructions carefully
you start an investigation that you • Never eat, drink, or chew gum in the
before you start an activity or
have designed yourself. laboratory.
investigation.
• Do not taste, touch, or smell any
substance in the laboratory unless
your teacher asks you to do so.
• Clean up and put away any equipment
after you are finished.
• Wash your hands with soap and
water at the end of each activity
or investigation.
A
UNIT Introduction to
Scientific Investigation
Skills and Career
Exploration
GOALS
of the Science
Program
To relate science to
technology, society, and
the environment
To develop the skills,
strategies, and habits
of mind required for
scientific investigation
To understand the basic
concepts of science
2 Unit A • Introduction to Scientific Investigation Skills and Career Exploration NEL

Focus on STSE
SCIENCE AND
YOUR LIFE
The goals of science education include much more than just the acquisition of scientific
facts or knowledge. Your science program and this textbook are designed to help you
understand the role of science in your everyday life and the impact of science and
technology on society and the environment.
This introductory unit introduces the important scientific investigation skills that you will
develop as you study biology, chemistry, Earth and space science, and physics in the
following units.
In these four units, you will have many opportunities to learn through scientific inquiry.
Through these inquiries, you will develop, practise, and refine the essential scientific
investigation skills. These skills are useful not only in learning high school science but
also in your post-secondary education and in your everyday life. You will also have
opportunities to explore careers that are related to the various science topics.
The main purpose of learning science at this level is to make connections. As you
progress through this course, you will develop an understanding of how science,
technology, society, and the environment (STSE) are interrelated. You will connect
the STSE relationships to your everyday life experiences, and you will develop
scientific literacy.
Think, Pair, Share

1. List five examples where science or technology directly or indirectly influence your
daily life. A
2. Pair up with a partner and share your ideas. Brainstorm to add further examples. C
3. Join another pair and share your lists. Eliminate duplicate examples and refine your
list. Share your list with the whole class. C A
NEL Focus on STSE 3

CHAPTER
1 Living and Working

with Science
KEY QUESTION: What skills are required to carry

out scientific investigations?
Science takes place in all kinds of places—not just in the lab.
4 Chapter 1 • Living and Working with Science NEL

UNIT A
Introduction to
Scientific Investigation
Skills and Career
Exploration
CHAPTER 1
Living and
Working with
Science
KEY CONCEPTS
Science and technology Scientific inquiry can be All scientific inquiries rely
are an important part of conducted in different on careful recording of
our everyday lives. ways, depending on the accurate and repeated
question to be answered. observations.
Careful analysis and Clear communication Scientific literacy is

interpretation of is important for sharing necessary for wise personal
observations help make scientific discoveries and decisions, responsible
them meaningful. ideas with others. citizenship, and careers.
NEL Looking Ahead 5

ENGAGE IN
SCIENCE
Before Jonathan heads off to school, he checks the Jonathan uses the AQHI scale to help him
Air Quality Health Index (AQHI) online. The website, determine the air quality and his outdoor activities for
a service provided by the federal and provincial the day. The scale ranges from 1 to 10+. The lower
governments, provides an hourly update of the numbers indicate good air quality and low health risk,
current air quality conditions. The weather forecast while the higher numbers indicate poor air quality and
predicts that it’s going to be a very hot day at 36 °C high health risk.
with little wind. These are perfect conditions for a bad Smog and traffic-related pollution cause major air
smog day! quality problems in many large cities. A 2007 report
Jonathan is more aware of the air quality since his by the City of Toronto suggests that traffic-related air
first asthma attack a few years ago. On days when pollution causes about 440 premature deaths and
the smog is bad, he experiences shortness of breath, about 1700 hospitalizations per year in the city. The
wheezing, tiredness, and headaches. He has learned estimated direct and indirect costs related to these
how to cope on those days when the air quality premature deaths are about $2.2 billion.
is poor by staying inside and limiting his physical What is smog, and what causes it? Is everyone
activities. After the smog disappears, Jonathan’s affected by smog or just those people who are at
symptoms clear up, and he can enjoy his usual increased risk? Is climate change affecting our air
outdoor activities. quality? What can we do about it?
1 2 3 4 5 6 7 8 9 10 10+
Low Moderate High Very

High
Figure 2 The AQHI scale indicates air quality

and the level of risk to human health.

FOCUS ON
READING
How to Read
Non-Fiction Text
Non-fiction text often includes a lot of information both in print and
visuals. Using the following strategies will help you to better understand
what you read:
Before Reading
• Preview the Text: Scan headings, bolded words, diagrams,
photos, and captions.
• Identify how the text is organized.
• Think about what you already know about the topic.
• Set a Purpose for Reading: Change the title or heading into
a question to help you determine your purpose for reading.
During Reading
• Read to answer the question you set as your purpose.
• Make connections to what you already know.
• Confirm, reject, or change your thinking based on
new information.
• Ask questions.
• Pause from time to time to check your understanding.
• Identify main ideas.
• Make jot notes or use sticky notes to highlight key points.
After Reading
• Reflect on what you have learned.
• Check to see if you answered your purpose for reading
question.
• Summarize what you learned in a graphic organizer or
by remembering details about the text.
• Ask yourself how what you learned fits with what you
already knew about the topic.
NEL Focus on Reading 7

1.1 Skills of Scientific Investigation
Scientists assume that all events are caused by something. Hundreds of
years ago, people believed that illnesses were caused by evil spirits or divine
punishments. Some cultures still hold these beliefs today. Technological
advances, such as the invention of the microscope, provide evidence that
many diseases are the result of infections by micro-organisms. Scientists
can now say that these micro-organisms “cause” disease (Figure 1).
Figure 1 While blood pressure generally Types of Scientific Inquiry

increases with age, high blood pressure
is not directly caused by age—nor does
All scientific inquiry uses similar processes to find answers to questions.
high blood pressure cause old age. In most cases, these processes attempt to identify relationships between
variables. A variable is any condition that could change in an inquiry.
variable any condition that changes or
varies the outcome of a scientific inquiry
A variable that is deliberately changed or selected by the investigator is
called the independent variable. A variable that changes in response to
independent variable a variable that is
the independent variable but is not directly controlled by the investigator
changed by the investigator
is called the dependent variable.
dependent variable a variable that
There are three common types of scientific inquiry: (1) the controlled
changes in response to the change in the
independent variable experiment, (2) the observational study, and (3) the correlational study.
Controlled Experiment
If the purpose of an inquiry is to determine whether one variable causes an
controlled experiment an experiment effect on another variable, then you can carry out a controlled experiment.
in which the independent variable is This is an experiment in which you control (change) the independent
purposely changed to find out what
variable to determine if the change affects the dependent variable. For
change, if any, occurs in the dependent
variable
example, if you want to determine how temperature affects the rate of a
chemical reaction, a controlled experiment is appropriate. In this case, you
would change the temperature (independent variable) and observe any effect
on the reaction rate (dependent variable).
Observational Study
Often the purpose of a scientific inquiry is to gather information to answer
observational study the careful watching a question about a natural phenomenon. Observational studies involve
and recording of a subject or phenomenon observing a subject or phenomenon without influencing it. Observational
to gather scientific information to answer
studies start with observations that lead to a question. Sometimes the
a question
researchers make a specific prediction about the answer to the question.
Sometimes they also have an explanation for their prediction.
Sciences such as astronomy and ecology rely on observational studies.
For example, if you wanted to determine the climatic conditions of a region,
you would plan an observational study. You would make observations over
many years, recording precipitation, temperature, and wind patterns. When
sufficient data were collected, you could produce a complete description
of the regional climate. Ongoing observations would make it possible to
identify any changes in the climate.
Correlational Study
correlational study a study in which In a correlational study, a scientist tries to determine whether one variable
an investigator looks at the relationship is affecting another variable, without controlling any of the variables.
between two variables Instead, the investigator simply observes variables that change naturally.

Correlation is the degree to which two sets of data vary together. Positive Correlation
A positive correlation indicates a direct relationship between variables: an
increase in one variable corresponds to an increase in the other variable
(Figure 2(a)). A negative correlation indicates an inverse relationship: an
increase in one variable corresponds to a decrease in the other variable y
(Figure 2(b)). A line of best fit can be drawn through the points on the
scatter graph. This line shows the relationship (positive or negative)
between the two variables.
If there is no relationship between the two variables, we say that there is (a)
x
no correlation (Figure 2(c)).
Negative Correlation
Table 1 Length of Education and Salary
Annual salary Annual salary

Person Education (years) ($000) Person Education (years) ($000)
y
1 12 45 14 12 50
2 19 110 15 15 75
3 11 40 16 12 55 (b)
x
4 15 65 17 14 70
No Correlation
5 14 60 18 17 65
6 20 140 19 12 55
7 18 100 20 16 80
y
8 11 50 21 15 145
9 18 95 22 13 60
10 18 90 23 16 55 (c)
x
11 13 50 24 10 40 Figure 2 (a) In a positive correlation,
variable y increases as variable x
12 19 100 25 17 95 increases. (b) In a negative correlation, y
13 10 50 decreases as x increases. (c) If there is
no correlation, there is no pattern.
As an example, consider the Annual Salary v. Years of Education

relationship between average annual
140
salary and amount of formal education
(Table 1 and Figure 3). As you might
Average Salary ($1000)
120
expect, there is a positive correlation
between these two variables. As the length 100
of formal education increases, the average
80
annual salary also increases. However, not
everyone who has many years of formal 60
education earns a high salary. Likewise,
some people with little formal education 40
earn a high salary. Also, two people with 9 12 15 18 21
the same level of education could be Years of Formal Education
earning different salaries. Figure 3 This graph shows a positive correlation between education and salary by
plotting the data from Table 1.
NEL 1.1 Skills of Scientific Investigation 9

Strong Positive Correlation When most of the data you collected is close to the line of best fit, there
is a strong correlation between your variables (Figure 4). A weak correlation
means that the relationship between your variables is less strong. The data
points do not fall as close to your line of best fit (Figure 5).
y When you know that two variables are correlated (either positively or
negatively), you can predict one variable based on the other. Generally, the
stronger the correlation (either positive or negative), the more probable it is
that your prediction will be correct. In the example in Figure 3, you could
x predict with some certainty that a person who has a high level of education
Figure 4 A strong positive correlation will earn a high salary.
Correlational studies require very large sample numbers and many
Weak Positive Correlation replications to produce valid results. A correlation between two variables does
not indicate that one variable causes an effect on the other. A correlation could
simply be a coincidence. Consider a fictitious correlational study that shows
that, in a given year, both the number of births increased and the number of
y earthquakes increased. It is highly unlikely that a reasonable link could be
established between the two. Any correlation is totally due to coincidence.
Reports of correlations can be deceiving. For example, a newspaper
headline reported that research showed a positive correlation between
x student height and mathematical ability. Taller students were better at solving
Figure 5 A weak positive correlation mathematical problems. What the research failed to note (or the newspaper
failed to report) was that the study included students of different ages. If the
study had been done with students of the same age, there would have likely
been no correlation between height and mathematical ability. The taller
students—the better problem solvers—were probably older than the shorter
students.
Researchers use correlational studies to further scientific understanding
without performing experiments. They can make their own observations and
measurements through fieldwork, interviews, and surveys. Alternatively, they
can investigate relationships by using data from other researchers.
Scientific Investigation Skills

Regardless of the type of scientific investigation, certain skills are important
in the process of conducting the investigation. These skills can be organized
into four categories: (1) initiating and planning, (2) performing and
recording, (3) analyzing and interpreting, and (4) communicating.
Initiating and Planning
All scientific investigations begin with a question. The question may have
arisen from observations of a natural phenomenon or from an individual’s
curiosity (Figure 6). Often they come from previous experiments or studies.
Some questions cannot be answered by scientific investigation, so it is
important to ask the right questions. To lead to a scientific investigation, a
question must be testable. Testable questions have certain characteristics:
• They must be about living things, non-living things, or events in the
natural world.
Figure 6 Scientists who first observed • They must be answerable through scientific investigation—controlled
unusual cave formations would
have been curious so they proposed experiments, observational studies, or correlational studies.
explanations for what they saw. • They may be answered by collecting and analyzing data to produce evidence.
If a question suggests that a controlled experiment should be performed,
then it is appropriate to propose a possible answer to the question. The
tentative answer, which is based on existing scientific knowledge, is called a
hypothesis. The hypothesis is directly related to the question. A hypothesis hypothesis a possible answer or untested
suggests a relationship between an independent variable and a dependent explanation that relates to the initial
question in an experiment
variable. A hypothesis serves two functions: (1) it proposes a possible
explanation, and (2) it suggests a method of obtaining evidence that will
support or reject the proposed explanation.
If you cannot make a hypothesis because you do not have a scientific
explanation, then you can make a simple prediction. A prediction is a prediction a statement that predicts the
statement that predicts the outcome of a controlled experiment, without an outcome of a controlled experiment
explanation. A prediction is not a guess: it is based on prior knowledge and
logical reasoning.
A hypothesis usually includes a prediction. It is often written in the form
“If …, then …, because ….” The “if … then” part constitutes the prediction;
the “because …” part is the explanation.
T RY THIS IDENTIFYING VARIABLES AND MAKING PREDICTIONS

SKILLS: Predicting, Communicating SKILLS HANDBOOK
3.B.2.
In this activity, you will identify dependent and independent • Is there a relationship between the average
variables and make predictions about the outcomes of scientific temperature and the number of pine trees in an area?
investigations. • How does temperature affect the size of crystals that form
Equipment and Materials: notebook or paper; pen in a solution?
• How is the egg-laying ability of penguins affected by the
1. Each of the following questions could form the basis of a
availability of food?
scientific investigation.
• How is the volume of water related to its temperature? A. For each statement, identify a possible independent variable
• How do phosphates affect the growth of aquatic plants? and a possible dependent variable and make a prediction.
• What is the relationship between the size of the image in a
mirror and the distance of the object from the mirror?
A hypothesis or a prediction provides the framework for the investigation. experimental design a brief description
It identifies the variables and suggests which is the independent and which of the procedure in which the hypothesis
is tested
is the dependent variable. The hypothesis or prediction also suggests an
experimental design by which the hypothesis can be tested fairly. The
experimental design briefly describes the procedure. The value and success
of the investigation depend on whether the experiment is fair, so careful
planning at this stage is critical.
Planning the investigation involves
• identifying the independent and dependent variables
• determining how the changes in the variables will be measured
• specifying how to control the variables not being tested
• selecting the appropriate equipment and materials (Figure 7)
• anticipating and addressing safety concerns
• deciding on a format for recording observations
Figure 7 Specialized equipment is

needed to conduct proper investigations.

Performing and Recording
After planning an investigation, it is important to follow the procedures
described during the planning stage carefully (Figure 8). If the procedures
present problems, they should be modified without changing the overall
structure of the investigation. Record any modifications to the procedure in
case you or someone else wants to repeat the investigation. If the problems
cannot be overcome, you may have to go back to the planning stage and
start again.
When performing the procedure, it is important to be constantly alert to
potential safety concerns. Be sure to read the safety concerns in the Skills
Handbook carefully before beginning an investigation and refer to them
frequently if you have any concerns.
While performing an investigation, you will need to make accurate
observations at regular intervals and record them carefully. Observations are
any information that is obtained through the senses or by extension of the
senses. Observations can be quantitative (numerical) or qualitative (non-
numerical).
quantitative observation a numerical Quantitative observations are based on measurements or counting
observation based on measurements or (Figure 9). Examples of quantitative measurements include length, mass,
counting
temperature, and population counts. Measuring is an important skill in
qualitative observation a non-numerical making observations. It is important to select the right measuring tool to
observation that describes the qualities of
provide a precise and accurate measurement.
objects or events
Qualitative observations are descriptions of the qualities of objects and
events, without any reference to a measurement or a number. Common
qualitative observations include the state of matter (solid, liquid, or gas),
texture, and odour. These qualities cannot be measured directly.
The method or format of recording your observations depends on the
type of observation. Quantitative observations are often recorded in an
appropriate table. Qualitative observations can be written in words or
recorded in pictures or sketches (Figure 10). Remember to record your
observations clearly and accurately so that you do not have to rely on
Figure 8 Scientists remove an ice memory when you report your findings.
core that has been cut from a glacier.
These ice cores provide clues to the
environmental conditions when the
glacier was formed.
Figure 9 Two members of a ski patrol

measure and record snow levels
to forecast avalanches. Since this
observation involves measuring, it is
a quantitative observation. Noting that
the lower layers of snow are more
compacted is a qualitative observation. Figure 10 This field scientist transfers handwritten notes into electronic form.
Analyzing and Interpreting
Tables of observations are usually not the final product for the data collected
during an investigation. Analyzing, or carefully studying, the observations
usually provides more information than the raw data itself. In addition, you
can plot graphs from the quantitative data to show up patterns and trends
more clearly (Figure 11).
Observed and Projected Warming
5.0
4.0
Global surface warming (°C)
3.0
2.0
1.0 Figure 11 The two lines show the

possible consequences of two scenarios.
The red line shows a scenario in which
0.0 humans continue to depend on fossil
fuels. The blue line shows what is
predicted to happen if humans switch
1900 1950 2000 2050 2100 to clean energy sources and conserve
Year energy.
Scenario A Scenario B
T RY THIS ANALYZING DATA

SKILLS HANDBOOK
SKILLS: Analyzing, Communicating
3.B.7., 6.A.
Data collection is the recording of information in an organized way. Table 2 Mouse Population Data
Analyzing data involves studying the data to uncover patterns and trends.
Mouse Mouse
Data interpretation involves explaining those patterns and trends. In this Quarter population Quarter population
activity, you will analyze and interpret data.
Equipment and Materials: notebook; graph paper; pens or markers 2004 Q1 520 2007 Q1 790
1. Table 2 provides the estimated quarterly mouse population in a 2004 Q2 570 2007 Q2 870
large field over six years. Study the data carefully.
2. Plot the provided data on a line graph using a coloured marker 2004 Q3 615 2007 Q3 930
or pen. 2004 Q4 550 2007 Q4 860
3. Calculate the average population for each year by averaging the
four quarterly numbers. 2005 Q1 600 2008 Q1 875
4. Plot the calculated yearly average on the same graph as well 2005 Q2 660 2008 Q2 940
using a different coloured marker or pen.
A. Describe the patterns and trends that you observe in the data 2005 Q3 725 2008 Q3 1010
in Table 2. 2005 Q4 675 2008 Q4 990
B. What is happening to the population? Do you think this trend
will continue indefinitely? Explain. 2006 Q1 705 2009 Q1 950
C. Propose a possible explanation for why the graph for the quarterly
2006 Q2 780 2009 Q2 1040
population data is a zigzagging line rather than a smooth line.
D. Is there a benefit to calculating and plotting the average 2006 Q3 820 2009 Q3 1090
population for each year? Explain.
2006 Q4 780 2009 Q4 980
E. Is it easier to see patterns and trends when the data are in the
table or when the data are plotted on the graph? Explain.

Analyzing observations also helps identify any errors in measurements.
You should carefully check any measurement that is clearly very different
from the others. If the very different measurement is caused by an error in
measurement, record it but do not include it in the analysis.
A very important skill in a scientific investigation is evaluating the
evidence that is obtained through observations. The quality of the
evidence depends on the quality of other aspects of the investigation—the
plan, the procedures, the equipment and materials, and the skills of the
investigator. To evaluate the evidence, you need to evaluate all aspects of the
investigation.
The whole purpose of analyzing and interpreting observations is to
answer the question posed at the beginning. You may have evidence that
you can use to confidently answer the question. You may conclude, however,
that you do not have sufficient evidence to answer the question with any
confidence. If your evidence confirms the prediction, then the hypothesis
is supported. The evidence does not, however, prove the hypothesis to be
true. If your evidence does not confirm the prediction, then the hypothesis
may not be an acceptable explanation. Learning that the hypothesis is not
supported is just as valuable as learning that it is supported. Rejection of a
hypothesis is not a failure in a scientific investigation. It is simply another
step along the path of finding an answer to the question.
Work in science seldom ends with a single experiment. Sometimes
other investigators repeat the investigation to see if their evidence is
the same. A question in science often sets off a chain reaction that leads
to other questions, which then leads to other investigations and other
questions. At the end of any investigation, the scientist asks questions such
as What does this mean? Is the information of any practical value? How
can the information be used? What other questions need to be answered?
What new questions arose as a result of this investigation?
Communicating
One of the important characteristics of scientific investigation is that
scientists share their information with the scientific community (Figure 12).
Figure 12 Sharing information is

a key characteristic of scientific
investigations.

Before scientific data can be published in a scientific journal, it must be
examined by other scientists in a process called peer review. Other experts
check that the data is valid and the science is correct. Clear and accurate
communication is essential for sharing information. It is important to share
not only the findings, but also the process by which evidence was obtained.
If the investigation is to be repeated by others, sharing the design and
procedures is just as important as sharing the findings.
By sharing their data and the techniques that they used to obtain, analyze,
and interpret their data, scientists give others the opportunity to both
review the data and use it in future research. The most common method for
communicating with others about an investigation is by writing a lab report
after the investigation is complete.
T RY THIS GETTING YOUR MESSAGE ACROSS

SKILLS HANDBOOK
SKILLS: Planning, Evaluating, Communicating 3.B.8., 3.B.9.
Accurate communication is as important in science as it is in 3. Exchange instructions with your partner.
everyday life. In this activity, you will work with a partner to 4. Use the instructions to complete the task without asking any
demonstrate the importance of accurate communication and the questions. If necessary, complete the task at home.
need to develop and refine your skills in this area.
5. Report back to your partner.
Equipment and Materials: notebook or paper; pen
A. How successful were you in completing the task? Explain.
1. You and your partner should each choose a different everyday B. Why is clear, accurate communication difficult?
task, such as tying a shoelace, preparing a meal, travelling
C. What skills do you need to communicate clearly? What do
from one location to another, or installing a piece of software
you need to do to develop these skills?
on a computer. It must be a task that poses no significant
D. What strategy did you use to make your instructions as clear
hazards. Do not name the task or provide any additional
instructions. as possible?
2. Write a set of detailed instructions that should enable E. What could you have done to communicate more clearly?
someone else to complete the task.
IN SUMMARY
• Observations of, and curiosity about, what we • A third type of inquiry is the correlational
see around us often lead to questions that trigger study, in which the researcher analyzes data to
scientific investigations. see if there is a relationship between a pair of
• One type of scientifi c inquiry is the controlled variables. The result may be a positive correlation,
experiment, in which the researcher keeps all a negative correlation, or no correlation.
but two variables constant, changes one (the The correlation could be strong or weak.
independent variable), and observes the other • Scientifi c investigation skills include initiating
(the dependent variable). and planning (asking a question and deciding
• A second type of inquiry is the observational on the best way to find an answer); performing
study, in which the researcher collects data by and recording (carrying out the procedure and
observing a situation without affecting it. making observations in an organized way);
analyzing and interpreting (searching for patterns
in the observations); and communicating
(sharing findings with others).

1.2 Scientific Literacy for Living and
Working in Canada
Scientific knowledge and technological innovations play an increasingly
important role in everyday life. New technologies are designed so that
the average person can use them without understanding how they work.
Many people feel that science and technology are too complex for most
of us to understand.
What Is Scientific Literacy?

Carl Sagan was a famous astronomer and author in the twentieth century.
He recognized the need to be scientifically and technologically literate.
In his book The Demon-Haunted World, Sagan said, “We’ve arranged a
global civilization in which the most crucial elements profoundly depend
on science and technology. We have also arranged things so that almost no
one understands science and technology. This is a prescription for disaster.
We might get away with it for a while, but sooner or later this combustible
mixture of ignorance and power will blow up in our faces.”
To make wise personal decisions and to act as a responsible citizen, it
is necessary to be scientifically and technologically literate. The Science
Teachers’ Association of Ontario (STAO) defines a scientifically and
technologically literate person as “one who can read and understand
common media reports about science and technology, critically evaluate
To read famous scientists’
statements about the value of
the information presented, and confidently engage in discussions and
scientific literacy, decision-making activities regarding issues that involve science and
GO TO NELSON SCIENCE technology.”
Scientific Literacy for Careers in Science
Look around your classroom at your fellow science students. Some of you
will probably pursue post-secondary education and a career in scientific
research (Figure 1(a)). Others will find careers in medicine, geology,
engineering, and environmental science Figure 1(b) and (c). Generally,
employers hire individuals with strong critical-thinking and problem-
solving skills and who have the ability to work as part of a team. These skills
are emphasized throughout the entire science program.
(a) (b) (c)

Figure 1 Some scientists conduct their research in laboratories. Others conduct their research in
the natural world.
Canadians are actively working in a broad range of science disciplines.
They are world leaders in such areas as astronomy, space exploration,
medicine, genetics, environmental science, and information and
communication technology. These Canadians are directly or indirectly
responsible for a long list of scientific discoveries and technological
inventions and innovations. The theory of plate tectonics, the discovery
of insulin, the invention of the cardiac pacemaker, and the concept of
standard time have made significant contributions to people and societies
around the world.
Throughout this book, you will have opportunities to explore careers that
are related to the area of science under study. Wherever you see a Career
icon with the accompanying note in the margin of this book, you will
be directed to the Nelson website. There you will be guided to research the
education and training requirements for scientific careers and to find out
about the roles and responsibilities of these careers.
Scientific Literacy for Life and Citizenship

A small number of people work in jobs that are directly related to science.
However, every one of us is a citizen. Citizenship comes with certain
rights and responsibilities. One of our basic rights is to have access to
a full education. Along with that right comes the responsibility to use
that education for the benefit of oneself and of society. Because science
and technology influence our lives, it is important that we recognize and
understand this influence. We can then make rational and ethical decisions
about issues that affect us as individuals and as a society.
At some point in your life, you will have to make decisions about your
own lifestyle. You will need to understand about the different types of
medical diagnoses and the treatments available to you. It will also be in
your best interest to know which products to buy (Figure 2). You will have
to make decisions related to critical issues: climate change, environmental
pollution, the depletion of natural resources, the protection of species, new
medical technologies, space exploration, and world hunger.
Figure 2 Science and technology affect

the decisions we make every day.
NEL 1.2 Scientific Literacy for Living and Working in Canada 17

As a society, we need to consider both the positive and the negative
impacts of developing and using scientific knowledge and new technologies.
We cannot foresee all the possible consequences of these achievements.
However, we must be aware of the positive and the negative implications
of new technologies. If we fail to do so, we may get some very unpleasant
surprises after the technology has been adopted.
It is important to understand the basic concepts of science. However,
it is impossible to know everything about science or to be aware of all the
new scientific discoveries and technological advances. To achieve scientific
literacy, it is just as important to learn about science as it is to learn science.
It is important to know what science can do, to know that knowledge
produced by science is reliable, and to know that science—despite its
limitations—is the best way to learn about the world. It is just as important
to be able to find and evaluate information and to use that information in
making decisions.
A scientifically literate person understands that the future will be very
different from the present. There are always new developments in science
and technology. He or she also understands that society influences science
and technology as much as science and technology influence society.
Achieving scientific literacy is not the same as preparing to be a scientist.
It is equally important to everyone, whether you are a a small-business
person, a lawyer, a construction worker, a car mechanic, a travel agent, a
doctor, an engineer, or a research scientist. Regardless of your plans and
ambitions, achieving a level of scientific literacy is an important goal.
IN SUMMARY
• Scientifi c literacy helps people to understand • Specifi c scientifi c knowledge and skills are
and evaluate information relating to science and necessary for a wide range of careers.
technology in the world so that they make better • Canadians have made valuable contributions
decisions. to the development of science and technology
• A general understanding of science is necessary around the world.
to be an informed citizen.

CHAPTER
1
LOOKING BACK
KEY CONCEPTS SUMMARY
Science and technology Scientific inquiry can be All scientific inquiries rely on
are an important part of our conducted in different ways, careful recording of accurate
everyday lives. depending on the question and repeated observations.
to be answered.
• All individuals are affected by • Observations are information
science and technology every day • Observations often lead to obtained by using the senses or
of their lives. questions that initiate scientific equipment that extends the senses.
• Most people do not understand the inquiry. • Observations can be quantitative
science and technology that they • The type of scientific inquiry depends (involving measuring or counting) or
use in their everyday lives. on the nature of the question. qualitative (involving descriptions).
• Many major social issues, such • Controlled experiments can be used • All observations should be recorded
as climate change and pollution, to determine how an independent accurately.
have a science and technology variable affects a dependent variable. • Repeating observations can
connection. • A hypothesis is a possible answer eliminate errors and increase the
and explanation for a scientific value of the evidence.
question. Hypotheses can be
proposed at the beginning or the
end of a scientific inquiry.
Careful analysis and Clear communication Scientific literacy is

interpretation of observations is important for sharing necessary for wise personal
help make them meaningful. scientific discoveries and decisions, responsible
ideas with others. citizenship, and careers.
• Analysis of observations involves
carefully studying data to identify • Scientists are expected to share • Careers in science and careers
patterns or trends. their findings with other scientists related to science require scientific
• Interpretation of observations and with the public. knowledge and skills.
involves explaining patterns and • The results of scientific • Scientific knowledge and skills are
trends in data. investigations should be reported essential for making logical and
• Analysis and interpretation clearly and honestly. reasoned personal decisions.
of observations may lead to • Effective communication allows • Citizens use their scientific knowledge
conclusions that answer the original others to repeat scientific inquiries. and skills to make decisions that
scientific question. benefit society.
• Interpretation of observations may • A scientifically literate person is
raise additional questions and lead better able to understand issues
to further scientific inquiries. related to science and technology.
NEL Looking Back 19

B
UNIT Tissues, Organs,
and Systems of
Living Things
OVERALL
Expectations
evaluate the importance
of medical and other
technological
developments related
to systems biology and
analyze their societal
and ethical implications
investigate cell division,
cell specialization, organs,
and systems in animals
and plants, using
research and inquiry
skills, including various
laboratory techniques
demonstrate an
hierarchical organization
of cells, from tissues, to
organs, to systems in
animals and plants
BIG Ideas
Plants and animals,
including humans, are
made of specialized cells,
tissues, and organs that are
organized into systems.
Developments in medicine
and medical technology
can have social and ethical
implications.
20 Unit B • Tissues, Organs, and Systems of Living Things NEL

Focus on StSe
MEDICAL
TECHNOLOGY
Most of us have encountered some kind of medical technology in our lives. Even if
we have not experienced it ourselves, someone we know probably has. If you have
ever broken a bone, you have probably had an X-ray taken. If someone in your family
has had kidney problems, he or she might have had to go on dialysis. Perhaps you
know someone who has been through organ transplant surgery, heart surgery, or
fertility treatment. There are many kinds of technology that help medical professionals
diagnose and treat health problems.
think/Pair/Share
1. Write a list of medical technologies that you, or people you know, have experienced.
Describe each technology and what it does in as much detail as possible. If
possible, describe how you felt during the procedure. Did you have positive or
negative feelings about the technology? C A
2. Share your list with a partner. C
3. Discuss your feelings about the technologies. Do any of them have ethical
implications? C A
4. Have the technologies made a difference to the human lifespan and quality of life?
Explain. C A
NEL Focus on STSE 21

UNIT
looKinG AheAd
B
UNIT B
Tissues, Organs,
and Systems of
Living Things
Cells, Cell Animal Systems Plant Systems

Division, and Cell
Specialization
Cells divide so that the organism can Animals have many organ systems Plants’ shoots and roots contain
grow, repair itself, and reproduce. that are interdependent. specialized tissues organized into
root, stems, leaves, and flowers.
unit tASK Preview
Family Health Supporter

Someone you know is ill or injured. Your support and As you work through this unit, you will be gaining the knowledge
knowledge are needed. You offer to help by researching and and skills to help you successfully complete your task.
providing a package of information related to the particular
health concern. UNIT TASK Bookmark
Working in a group, choose one of the suggested health The Unit Task is described in detail on page 156. As you
scenarios. You will then consider the issue, research the work through the unit, look for this bookmark and see how
illness or injury, collect information on how the functioning the section relates to the Unit Task.
of a healthy organ system is affected, and find out what
diagnostic tests and treatment options are available. You will
analyze the information and decide what you think is the
ASSESSMENT
best course of action. You will then report your findings to the You will be assessed on how well you
patient or the patient’s family.
• address the chosen health issue and present
Remember that self-diagnosis is not reliable; only health appropriate solutions
professionals should make diagnoses and recommend • develop a reasoned “best response” for the patient
treatments, in consultation with the patient or the • communicate this information effectively to the
patient’s family. audience

PREREQUISITES
Concepts Skills
• Cell structure • Using a light microscope
• Meeting needs for life • Defining issues
• Organization within an organism • Identifying benefits and costs of
• Human organ systems scientific developments
1. All living things are made of cells. Explain how a single-celled 7. (a) Create a concept map that includes the following terms:
organism can do all of the things that a multi-celled organism cell; tissue; organ; organ system. Include linking words
can do. K/U and examples.
2. Use a concept map to show how an Amoeba (single-celled (b) Extend your concept map by adding other related
organism), a worm, and a human obtain oxygen. K/U C terms. K/U
3. Construct a Venn diagram to list the key differences between 8. Match the following organs with their organ systems: K/U
plant and animal cells. K/U C Organ System

4. (a) What process is illustrated in Figure 1? (a) heart respiratory
(b) stomach circulatory
(b) How does this process affect cells? K/U A
(c) lung nervous
(d) spinal cord digestive
9. (a) How did you observe cells in past science classes?

(b) Describe any difficulties that you experienced while trying
to examine cells. A
10. Microscopes have played a key role in our knowledge and
understanding of cells. How has this technology improved our
understanding of the structure of cells? A
Figure 1 Particles moving into a cell 11. Think about how you have used microscopes in your studies,
and answer the following questions: K/U
5. Copy Table 1 into your notebook. Complete the table to (a) What is the proper way to carry a microscope?
describe how the three organisms meet these basic needs (b) Which objective lens should you use to start viewing a
(if they do). K/U slide?
Table 1
(c) When do you use the coarse-adjustment knob?
Needs
(d) List the steps in preparing a wet-mount slide.
Organism Nutrition Movement Gas exchange
(e) Describe the correct procedure for using the highest-
maple tree
power objective lens.
Amoeba
(f) Which objective lens should you place over the stage
human when putting away the microscope?
6. (a) List four structural differences between a water lily and a 12. Scientists have developed some pest-resistant crops by
human. genetic engineering. These plants do not need as many
(b) List four structural differences between an Amoeba and a chemical pesticides as normal plants. However, these
human. K/U pest-resistant crops may crossbreed with native plants and
cause problems for natural populations. A
(a) What is the main issue here?
(b) List at least four possible stakeholders involved in this issue.
(c) Name one positive impact and one negative impact of
pest-resistant crops for each stakeholder.
NEL Looking Ahead 23

CHAPTER
2 Cells, Cell Division,

and Cell Specialization
KEY QUESTION: How and why do cells divide?
Most cells are able to divide in a controlled, orderly fashion to produce

another generation of functional cells. Occasionally, however, cell division
goes wrong and cells, such as these lung cancer cells, grow out of control.
24 Chapter 2 • Cells, Cell Division, and Cell Specialization NEL

UNIT B
Tissues, Organs,
and Systems of
Living Things

Division, and Cell
Specialization
KEY CONCEPTS
mitosis cytokinesis
cycle
begins
cell cell
prepares division cell
to divide grows
e
as
interph
DNA cell receives

replicates instructions
regarding division
All organisms are made Microscopes enable us to The cell cycle occurs in
up of one or more cells. examine cells in detail. distinct stages.
Cell division is important Cancer cells generally Medical imaging

for growth, repair, and divide more rapidly than technologies are important
reproduction. normal cells. in diagnosing and treating
disease.

ENGAGE IN
SCIENCE
Figure 1 The Canadian Cancer Society started selling

Every day, medical science is finding new daffodils as a fundraiser in 1957. Over 2 million daffodils
treatments—and even cures—for some of the many are sold each year to support cancer research.
types of cancer. Research pays, but research also
costs. Lab space, chemicals, scientists, and hospitals Fundraising and awareness-raising can take place
all require money as research teams seek new on any scale and do not have to involve athletic feats.
treatments and cures. Any activity can become a focus for change and can
To date, the Relay for Life has raised over lead to a cure for cancer or for some other disease.
$50 million toward cancer research. The Relay for Life Join an existing event or start one of your own. Knit
is more than just a fundraiser, although fundraising for the Cure: make blankets for children with cancer
is one of the goals of the Canadian Cancer Society’s while sponsors donate to your cause. Skate for the
country-wide event. People all over Canada join the Cure: collect money for an
Relay for Life to celebrate cancer survivors, remember ice-fun marathon. Ski
friends and family who have died of cancer, raise down sponsored runs.
awareness of cancer research, and fight back. Have a dance-a-thon.
Participants believe that cancer can be beaten and are Sew, read, wash cars, ...
doing what they can to make that happen. What is your school
Every year in over one hundred communities doing to help find a
in Ontario, people form relay teams and sign up cure? What do you like to
sponsors. The teams take turns walking or jogging do? Could it become the
around a track through the night. Candles, music, next event to fund a
banners, and visiting celebrities and entertainers cure for a disease?
add to the up-beat, hopeful mood. This is not a race; Is there a school
everybody wins. A sense of community and support club, team, group
develops. As the sun rises, participants celebrate with that you can
a renewed belief that we will find a cure for cancer. organize? Every
No idea is too far-fetched for a fundraiser for idea starts with
medical research. A Toronto radio station sponsored one person
a Ride for the Cure where bicyclists rode over 200 km who believes
from Toronto to Niagara Falls. A Waterloo archery and inspires
shop held a Shoot for the Cure, in which sponsors others.
rewarded good scores with bonus donations and You can make a
raised over $6000 in their first year. The Canadian difference.
Breast Cancer Foundation and the Pink Ribbon
campaign raise public awareness and money for
breast cancer research. Figure 2 Shaving heads
is one way to raise money
and show support for those
undergoing chemotherapy.
WHAT DO YOU
THINK?
many of the ideas you will explore in this chapter are ideas that you have already
encountered. you may have encountered these ideas in school, at home, or in
the world around you. not all of the following statements are true. Consider each
1 New cells come from previously existing cells.

Agree/disagree?
4 Mitosis and the cell cycle are identical processes.
Agree/disagree?
2 AllAgree/disagree?
plant cells are green.
5 Diffusion is the movement of particles from an area of
higher concentration to an area of lower concentration.
Agree/disagree?
3 Plant and animal cells contain all the same organelles.

Agree/disagree?
radiation is harmful to humans.
NEL What Do You Think? 27

FOCUS ON
READING
Making Connections
When you make connections with a text, you are linking ideas and
information in a new text with personal experiences or with your knowledge
of other texts or world events. There are three main types of connections
you can make to help you interpret a text.
• Text-to-Self: making connections between the text and your
own experiences
READING TIP
• Text-to-Text: making connections between the text and other texts
you have read or viewed.
you develop literacy strategies. • Text-to-World: making connections between events and issues in
the new text and the world.
malignant (cancerous)
Cell Growth rates and Cancer
tumour affects
surrounding cells
A cancer cell is one that continues to divide despite messages from the
nucleus or the surrounding cells to stop. The cell’s checkpoints may fail
metastatic (cancerous)
cells leave the tumour
and start a secondary
tumour elsewhere
to identify problems or kill off the cell. The uncontrolled growth and
normal potentially
cell cancerous
cell
division may create a rapidly growing mass of cells that form a lump or
benign (non-cancerous)
tumour does not affect
normal uncontrolled surrounding cells, unless by
cell division cell division physically crowding them
tumour (Figure 1). The cells of the tumour may stay together and have
Figure 1 A tumour is a mass of cells with no serious effect on surrounding tissues. This is called a benign tumour.
no function. A tumour can remain benign, Cells in a benign tumour are not cancerous. However, sometimes a
or it can become malignant. Tumour cells benign tumour can grow so large that it physically crowds nearby cells
can metastasize, spreading to other areas
and tissues. This can affect their normal function.
of the body. Malignant and metastatic
tumours are considered cancerous.
Making Connections in Action

Making connections can help you understand a text by visualizing,
making inferences, forming opinions, or drawing conclusions. Here’s
how one student made connections with the text on cancer cells.
How the Connection Helped Me

Connections I Made to the Text Understand and Respond to the Text
Text-to-Self Connection: about my uncle helps me form an opinion about the

whose prostate cancer was detected early importance of regular medical check ups
and treated successfully
Text-to-Text Connection: between graphic helps me visualize how cancer spreads

and Invading Armies video game through the body
Text-to-World Connection: between text helps me draw conclusions about why

and statistics about cancer as a leading almost 50% of people with cancer die
cause of death in Canada

Plant and Animal Cells 2.1
Biology as a science is built on three simple but very important ideas. These
three ideas form the cell theory. The cell theory states that cell theory a theory that all living things
are made up of one or more cells, that
1. All living things are made up of one or more cells and their products.
cells are the basic unit of life, and that all
2. The cell is the simplest unit that can carry out all life processes. cells come from pre-existing cells
3. All cells come from other cells; they do not come from
non-living matter.
All living things are made up of cells, but these cells may be very simple or
very complex. The simplest organisms are archaea and bacteria. These simple,
single-celled life forms are called prokaryotes (Figure 1(a)). The cells do not prokaryote a cell that does not contain
have a nucleus. More complex cells can exist as single-celled organisms or a nucleus or other membrane-bound
organelles
multicellular organisms. The cells of these organisms, known as eukaryotes,
have a more complex internal organization, including a nucleus. Eukaryotes eukaryote a cell that contains a nucleus
include all protists, fungi, animals, and plants, from the tiniest Amoeba to the and other organelles, each surrounded by
a thin membrane
longest whale and the tallest tree (Figure 1(b) to (d)). The cells of eukaryotes
are much larger than the cells of prokaryotes: tens to thousands of times
larger. There are even some eukaryotes—beyond the scope of this unit—that READING TIP
are made up of one huge cell with very many nuclei. Making Connections
When trying to make connections
with a text, use prompts or questions
ORGANISM such as:
• This example reminds me of…
without a with a
• This graph makes me ask why…
nucleus nucleus
• Are these facts correct?
• Have I read about this before?
prokaryote eukaryote
(e.g., E.coli)) one cell many cells
single-celled multicellular
organism organism
(e.g., Amoeba)
(a)
animal plant
(b) (e.g., whale) (e.g., pine tree)
Figure 1 The relationship between

prokaryotes and eukaryotes. The
bacterium (a) is a prokaryote. The
Amoeba (b), the whale (c), and
(c) (d) the pine tree (d) are all eukaryotes.
Cell Structure
Your body is made up of many specialized organs that carry out all the
processes needed to live. In the same way, a eukaryotic cell also has specialized organelle a cell structure that performs a
parts, called organelles, that carry out specific functions necessary for life. specific function for the cell
NEL 2.1 Plant and Animal Cells 29

Structures Common to Plants and Animal Cells
All cells have to perform the same basic activities to stay alive: use energy,
store materials, take materials from the environment, get rid of wastes, move
substances to where they are needed, and reproduce. Each organelle has a
specific function within the cell. Just as workers in a factory or a hospital
coordinate their efforts to achieve a purpose, the various organelles of a cell
work together to meet the needs of the cell—and the whole organism.
Figure 2 shows the organelles in a typical plant cell and a typical animal cell.
ribosome Golgi body

endoplasmic
chloroplast reticulum cytoplasm
cell membrane
cell wall nucleus
mitochondrion
cell membrane
vacuole
vacuole nuclear
membrane
cytoplasm
ribosome nucleus
mitochondrion
endoplasmic nuclear
reticulum membrane
Golgi body
(a) Plant cell (b) Animal cell
Figure 2 Plant and animal cells have many of the same organelles, but there are some differences.
CytoPlASm
All the organelles inside the cell are suspended in the cytoplasm. The
cytoplasm is mostly water, but it also contains many other substances that
the cell stores until they are needed. Many chemical reactions take place
within the cytoplasm, which can change from jelly-like to liquid, allowing
organelles to be moved around.
Cell membrAne
Figure 3 This TEM image of a cell
highlights the cell membrane in green.
The cell is surrounded by a flexible double-layered cell membrane (Figure 3).
The function of the cell membrane is both to support the cell and to allow
some substances to enter while keeping others out. For example, water
and oxygen molecules can easily pass through the cell membrane, but
larger molecules, such as proteins, cannot. Because of this ability, the cell
membrane is called a “semi-permeable membrane.”
A similar membrane also surrounds most organelles in a eukaryotic cell.
nuCleuS
The nucleus is a roughly spherical structure within the cell (Figure 4). The
Figure 4 The large nucleus is easily
visible inside this starfish cell. nucleus contains genetic information that controls all cell activities. This
genetic information is stored on chromosomes. Chromosomes contain DNA
DNA (deoxyribonucleic acid) the
(deoxyribonucleic acid), the substance that carries the coded instructions
material in the nucleus of a cell that
contains all of the cell’s genetic for all cell activity. When a cell divides, the DNA is copied so that each new
information cell has a complete set of DNA.

mitoChondriA
Cells contain many mitochondria (singular: mitochondrion) (Figure 5).
Mitochondria are sometimes called the “power plants” of the cell because they
make energy available to the cell. Active cells, such as muscle cells, have more
mitochondria than less active cells, such as fat-storage cells. Cells store energy
as a form of glucose (a sugar). The mitochondria contain enzymes that help
to convert the stored energy into an easily usable form. This process is called
cellular respiration and requires oxygen. The waste products of this reaction Figure 5 The mitochondrion (17 000 3)
are carbon dioxide and water. is the large, reddish, oval structure in
glucose + oxygen → carbon dioxide + water + usable energy this TEM image.
Cells in which cellular respiration has to happen very fast, such as muscle
cells and cells in the liver, have many mitochondria. In contrast, cells that are
fairly inactive—that do not have to respire quickly—tend to have very few
mitochondria. Fat cells may have only one or two mitochondria.
endoPlASmiC retiCulum
The endoplasmic reticulum is a three-dimensional network of branching tubes
and pockets (Figure 6). It extends throughout the cytoplasm and is continuous
from the nuclear membrane to the cell membrane. These fluid-filled tubes Figure 6 The endoplasmic reticulum
(5 500x), coloured brown in this TEM,
transport materials, such as proteins, through the cell. transports materials throughout the cell.
Endoplasmic reticulum is important in many types of cells. In the brain
it assists with the production and release of hormones. In the muscles the
endoplasmic reticulum is involved with muscle contraction.
GolGi bodieS
Golgi bodies collect and process materials to be removed from the cell
(Figure 7). They also make and secrete mucus. Cells that secrete a lot of
mucus, such as cells lining the intestine, have many Golgi bodies.
VACuoleS Figure 7 Golgi body (30 0003)
A vacuole is a single layer of membrane enclosing fluid in a sac. The functions

of vacuoles vary greatly, according to the type of cell. These functions include
containing some substances, removing unwanted substances from the cell,
and maintaining internal fluid pressure (turgor) within the cell. (The special
role of plant vacuoles is explained below.) Animal cells may have many small
vacuoles that are often not visible. Mature plant cells usually have one central
vacuole that is visible under a microscope.
Some animal cells can change their shape to wrap around and surround (a)
smaller objects to bring them inside the cell. Amoeba do this to obtain food.
Some white blood cells engulf bacteria to kill them. During the engulfing
process, a portion of the cell membrane turns inside out and forms a vacuole
inside the cell until the engulfed object is digested. Then any waste material is
ejected from the cell as the vacuole again joins up with the cell membrane.
organelles in Plants Cells only

(b)
Plant cells and animal cells have many structures in common, but there are
also some differences. Plant cells have some organelles that animal cells do not Figure 8 Plant cells (a) have a cell
wall, large vacuoles, and chloroplasts
have (Figure 8). (5 5003). Animal cells (b) do not
(2 5003).
NEL 2.1 Plant and Animal Cells 31

CELL WALL
The cell wall is found just outside the cell membrane of a plant cell. It is a
rigid but porous structure made of cellulose. This cell wall provides support
for the cell and protection from physical injury. This tough material may hold
together long after the plant has died. The paper in this book is composed
mostly of cellulose from the cell walls of trees.
VACuole
Plant cells usually have one large vacuole, which takes up most of the space
inside the cell. When these are full of water, turgor pressure keeps the cells
plump, which keeps the plant’s stems and leaves firm. If the water level drops,
however, the vacuoles lose turgor pressure and the cells become soft. The plant
stems and leaves become limp and droopy until the water is replaced.
ChloroPlAStS
Many plant cells that are exposed to light, such as the cells of leaves, have
structures called chloroplasts (Figure 9). Chloroplasts contain chlorophyll
and give leaves their green colour. More importantly, chloroplasts absorb light
energy. This light energy is used in photosynthesis—the process of converting
carbon dioxide and water into glucose and oxygen.
Figure 9 Chloroplasts in plant cells carbon dioxide + water + energy (sunlight) → glucose + oxygen
(2503) Photosynthesis allows plants to obtain their energy from the Sun so that
they can make their own food. Plant cells rely on mitochondria to metabolize
glucose, just as animal cells do.
IN SUMMARY
• The cell theory states that all living things are • Eukaryotic cells contain organelles that carry
made up of cells, the cell is the simplest unit that out specific life functions.
can carry out all life processes, and all cells are • The cell membrane, cytoplasm, nucleus,
reproduced from other cells. mitochondria, endoplasmic reticulum, Golgi
• The simplest single-celled organisms, including bodies, and vacuoles occur in both plant and
bacteria, are prokaryotes. More complex animal cells.
organisms, including multicellular organisms, • Structures found only in plant cells are
are eukaryotes. chloroplasts, a large vacuole, and the cell wall.
CHECK YOUR LEARNING

1. Summarize the cell theory in your own words. K/U 6. Not all plant cells contain chloroplasts. What is the most
2. Are your cells prokaryotic or eukaryotic? Explain. K/U likely reason for this? K/U
3. What is the most obvious difference between prokaryotic 7. Plant cells are surrounded by a cell wall. What is the
and eukaryotic cells? K/U function of this structure? K/U
4. How does the nucleus coordinate cell activities? K/U 8. Plant cells can make their own “food”—glucose. Why do
plant cells have mitochondria? K/U
5. When you exercise, you breathe harder and faster. Using
your knowledge of organelles, explain why this happens. A

TECH ConnEct OSSLT
Seeing inside
Scientists have been exploring the inner workings of our bodies Multiphoton microscopy (MPM) is an extension of confocal
with microscopes for centuries. Traditional light microscopes can microscopy. Mulitphoton microscopes deliver a precise infrared (IR)
only reveal so much. The very nature of light limits the size of laser pulse to a desired point within a sample of cells. A
objects that we can see. Also, it is not possible to look into solid fluorescent marker in the sample absorbs the IR light and glows
tissues using traditional microscopy. However, new technology at that specific point. Infrared light does not scatter as much as
is extending our ability to see inside tissues and organs. The visible light when it passes through the specimen, so a scientist
resulting images are revolutionizing how disease is diagnosed. can “look” deeper into the sample (Figure 2). MPM is not
One development is called “confocal microscopy.” This damaging to living cells. In fact, it is so safe that doctors use MPM
technique uses a process called fluorescence. A material to diagnose eye conditions. Researchers are exploring whether
fluoresces (glows) if it absorbs ultraviolet (UV) light and this technology can also be used to understand brain diseases and
immediately emits visible light. In confocal microscopy, scientists cancer. It might be possible to find cancer in internal organs, such
incorporate fluorescent substances into the tissues or cells to as the bladder and colon, by using a probe with a tiny camera to
be examined. These fluorescent markers glow when viewed obtain an image. Then doctors could get enough information to
under the microscope. Different fluorescent markers glow when make a diagnosis without performing surgery.
they absorb different wavelengths of light. Confocal microscopy
allows scientists to look at fluorescence on more than one
plane. It does this by concentrating tiny beams of light on the
specimen, instead of bathing the whole specimen in light from a
single source. In this way, the viewer is able to see much more
detail at high magnification, and in three dimensions (Figure 1).
Confocal microscopy is used to diagnose a wide range of medical
conditions including epilepsy, eye diseases, genetic disorders such
as Alport syndrome, and skin cancer. We are still finding new uses
for the technology.
Figure 2 Recent developments in microscopy give scientists new

Figure 1 A confocal microscope insights into the structure and funtions of our bodies.
These technologies are just the beginning. Other emerging

methods, such as digital holographic microscopy and three-
dimensional structured illumination, might some day allow doctors
to see everything going on inside our living cells, tissues, and
organs up close and in detail.
Go to nelSon SCienCe
NEL 33
2.2 PERFORM AN ACTIVITY
Observing Plant and Animal Cells SKILLS MENU

In this activity, you will observe and compare a typical plant cell and a Hypothesizing Observing
typical animal cell. You will look at the organelles of each and identify Planning Evaluating
the major differences. The plant cell will be taken from an onion; the Controlling Variables Communicating
animal cell will be prepared slides of human cheek cells. After observing
these cells using a microscope, you will draw formal lab diagrams to
record your observations.
Purpose 4. Carefully place this membrane on the drop

Part A: To prepare a wet mount of onion cells, to of water.
study one cell using a microscope, and to draw and 5. Carefully lower the cover slip from one side to
label a diagram of the visible features. cover the sample.
Part B: To examine a prepared slide of human cheek 6. Observe the sample using low power. Focus
cells, to study one cell using a microscope, and to using the coarse-adjustment knob.
draw and label a diagram of the visible features. 7. Draw and label a sketch to show how the
individual cells fit together.
equipment and materials 8. Stain the specimen by putting one drop of iodine
• lab apron stain at one edge of the cover slip. Hold a piece
• disposable gloves of paper towel at the opposite edge to draw the
• clean microscope slide and cover slip stain across, under the cover slip (Figure 1).
• forceps or tweezers
• microscope
• dropper bottles of
• distilled water
• iodine stain
• onion
• paper towel
Iodine stain is toxic. It can also stain skin Figure 1 Staining an onion skin wet mount with iodine
and clothing. Wear a lab apron and waterproof gloves
when you use iodine in the lab.
9. Observe the sample using medium power. Focus
using the fine-adjustment knob.
Procedure
SKILLS HANDBOOK
2.d., 3.b.6.
10. Observe one cell. Draw and label a diagram of the
Part A: Preparing a Wet Mount visible structures.
of onion Cells 11. Rinse the slide and clean it as instructed.
1. Put on your lab apron and the disposable gloves. 12. If your teacher provides prepared slides of
2. Put one drop of distilled water on a clean other plant cells, look at these and record your
microscope slide. observations.
3. Using the forceps, peel the inner translucent
membrane from a small piece of onion.

Part B: Examining a Prepared Slide Apply and extend
of Cheek Cells (g) If you looked at other plant cells in this activity,
13. Observe the provided slide of human cheek cells describe how they differed from an onion cell.
under the microscope using low power. Try to Give reasons for these differences. T/I
find an area of the slide where the cells do not (h) Most books state that plant cells contain
overlap. Focus on one cell using the coarse- chloroplasts. Based on your observations, is this
adjustment knob. statement correct? Support and explain your
14. Observe the sample using medium power. Focus answer. T/I
on one cell using the fine-adjustment knob. (i) Would you expect all animal cells to look the
15. Observe one cell. If necessary, use the high-power same? Explain your answer. T/I
objective. Draw and label a diagram of the cell

and any visible structures.
Analyze and evaluate

(a) What structures were you able to identify in the
onion cells? T/I
(b) What structures were you able to identify in the

cheek cells? T/I
(c) What was the most obvious difference between

the two types of cells? T/I
(d) Are onion cells typical plant cells? Explain. T/I
(e) Suggest why onions and humans were used as

the source of cells in this activity.A
(f) What difference, if any, did you notice in the cells

before and after they were stained with iodine?
Why were you advised to stain the cells? T/I
NEL 2.2 Perform an Activity 35

2.3 The Importance of Cell Division
You started life as a single cell: a fertilized egg. Now your body is made up
of trillions of cells. How does a single cell become a full-grown multicellular
plant or animal? Cell division allows organisms to reproduce, to grow, and
to repair damage.
Cell division for reproduction

The ability to reproduce is an important characteristic of all living things,
from bacteria to elephants.
All cells, including single-celled organisms, use cell division to reproduce.
Figure 1 Bacteria produce new Each time a parent cell divides, it results in two new organisms (Figure 1).
individuals simply by dividing in two. Each organism inherits genetic information from its parent. It is very
Under ideal conditions, bacteria can
double their numbers every 20 minutes. important that each new cell has a complete set of genetic information. This
(18 0003) type of reproduction, called asexual reproduction, involves only one parent.
The offspring are exact genetic copies of the parent.
asexual reproduction the process of
producing offspring from only one parent;
Multicellular organisms also need to reproduce and pass their genetic
the production of offspring that are information along to their offspring. Some multicellular organisms can
genetically identical to the parent produce offspring by asexual reproduction (Figure 2). Only one parent is
involved, and the young will have exactly the same DNA as that parent.
sexual reproduction the process of We are more familiar with the idea of sexual reproduction, in which
producing offspring by the fusion of two a cell from one parent joins with a cell from another parent. These two
gametes; the production of offspring that
parental cells are different from normal body cells: they contain only half
have genetic information from each parent
of the DNA usually found in a cell. These “half cells” are known as gametes.
To produce gametes, some of the parents’ cells undergo an additional
To learn more about meiosis, cell division process called meiosis. When the two gametes combine, the
Go to nelSon SCienCe offspring inherits characteristics from both parents (Figure 3).
Figure 2 This houseleek is reproducing Figure 3 Sexual reproduction results in offspring

asexually. Each rosette is an individual plant that have characteristics of both parents. This is
that is genetically identical to the parent. because their cells contain DNA from both parents.
Cell division for Growth

One of the main characteristics of life is that all organisms grow. As
multicellular organisms grow, the number of cells increases. Why does the
number of cells increase instead of simply increasing the size of the cells?
This has to do with how a cell uses chemicals to function.
cell membrane
Plant and animal cells all need the same things:
a source of energy, nutrients, water, and gases oxygen
(Figure 4). Many chemicals need to be in
carbon dioxide
solution (dissolved in water) so that they
can be used in chemical reactions within
the cell. It is therefore very important water
that cells contain plenty of water. The
cell must excrete (get rid of) carbon
dioxide and other waste products.
Why does the number of cells increase
as an organism grows? Chemicals used sugar waste products
during cell activity and growth enter
Figure 4 Substances entering and leaving a typical animal cell
the cell across the membrane and
travel through the cell to where they are used. This movement of chemicals
occurs by diffusion. Chemicals diffuse from an area of higher concentration
to an area of lower concentration (Figure 5). Concentration is the amount of
substance (the solute) in a given volume of solution.
Water enters and leaves cells by a process called osmosis. In osmosis, high concentration low concentration
water always moves toward where the solution is more concentrated. Figure 5 The red particles diffuse
Diffusion and osmosis take time. Important chemicals must be available through the first cell and into the next
one.
to all parts of the cell, in the right amount of water, for the cell to function
properly. Waste products must also diffuse out of the cell quickly so they do diffusion a transport mechanism for
not poison the cell. When a cell gets too large, chemicals and water cannot moving chemicals into and out of the cell,
from an area of higher concentration to an
move through it fast enough.
area of lower concentration
Cell division for repair concentration the amount of a substance

(solute) present in a given volume of solution
Every day, your body sheds millions of dead skin cells, all of which are
replaced by new ones. Your body replaces each red blood cell about every osmosis the movement of a fluid, usually
water, across a membrane toward an area
120 days. If you break a bone, cells divide to heal the break. Every cut
of high solute concentration
and blister needs new cells to fill in the gaps. All organisms need to repair
themselves to stay alive.
To learn more about osmosis,
Go to nelSon SCienCe
IN SUMMARY
• Cells undergo cell division for reproduction, • Chemicals diffuse into, throughout, and out of
growth, and repair. cells. This process must happen quickly enough
• Reproduction involves the transfer of genetic for the cell to function.
information from the parent(s) to the offspring. • When part of an organism is damaged, the
• As multicellular organisms grow, their cells remaining cells divide to repair the injury.
duplicate their genetic information and divide.
CHECK YOUR LEARNING

1. Name three reasons for cell division. K/U
4. What processes are responsible for chemicals
2. A cleaning product claims to kill “99.9 % moving into, throughout, and out of cells? K/U
of all bacteria.” Will a cleaned surface stay 5. Why do cells divide instead of just getting
bacteria-free forever? Explain your answer. A
bigger, as an organism grows? K/U
3. List three differences between asexual 6. A minor wound heals over time. Explain how
reproduction and sexual reproduction. K/U
this happens. A
NEL 2.3 The Importance of Cell Division 37

What Limits Cell Size? SKILLS MENU

Why do individual cells stop growing and start dividing Hypothesizing Observing
compressed Predicting
dangerously Analyzing
when they reach a certain size? gas reactive material
Planning Evaluating
In this investigation you will use models of cells to investigateflammable and Controlling Variables
biohazardous
Communicating
combustible
factors that might limit cell size. The model cells contain a material
infectious material
substance that changes from colourless to pink when it comes into poisonous and
infectious material
oxidizing
contact with sodium hydroxide. material
causing immediate
and serious toxic
effects
poisonous and
Testable Question Sodium

corrosive
material
hydroxide solution is corrosive and will irritate your
infectious material
causing other
skin or eyes. Avoid toxic
splashing
effects this solution on your skin, in
How does the size of a cell affect the distribution of your eyes, or on clothing. Immediately rinse any spills with
chemicals throughout the cell? cold water and inform your teacher of the spill. Carefully
follow your teacher’s instructions for disposal.
Procedure
SKILLS HANDBOOK
Predict an answer to the Testable Question, using 3.B.
what you know about diffusion in cells. 1. Put on your eye protection, lab apron, and
gloves. Place your three agar “cells” into the
Experimental Design beaker or cup.
You will use different-sized agar cubes as models of 2. Pour enough sodium hydroxide solution into the
living cells. You will submerge these cells in a solution beaker to cover the cells completely.
of sodium hydroxide for 10 min. You will observe 3. Allow your cells to remain in the sodium
whether sodium hydroxide diffuses to the centre of a hydroxide solution for 10 min. Use the glass rods
large cell as quickly as it diffuses to the centre of a small or stir sticks to gently turn the cells often. Make
cell. You will also investigate the relationship between sure that all sides of the cells come in contact
the surface area and the volume of different-sized cells with the solution. Avoid cutting or scratching the
and draw conclusions about maximum cell size. cells when you turn them.
4. After 10 min, remove the cells from the beaker
Equipment and Materials with the scoopula. Blot each cell dry with the
• eye protection paper towels.
• lab apron 5. Copy Table 1 (on the next page) into your
• disposable gloves notebook.
• 250 mL beaker or plastic cup
6. Carefully measure the length of one side of one
• 2 glass rods or stir sticks
cell (cell A) in mm. Record this measurement in
• timing device
the appropriate place in your table.
• scoopula
• ruler 7. Carefully cut cell A in half with the scalpel.
• scalpel Be very careful when using a scalpel. It is sharp enough to
• 3 different-sized cubes of phenolphthalein agar cut your skin. Always cut down toward a cutting board or
• 100 mL dilute sodium hydroxide solution paper towel. Never cut toward your hand.
(0.1 mol/L)
• paper towels 8. Where the sodium hydroxide diffused into the
cells, the agar will have turned pink or purple.
Measure how far the colour change extends into
cell A. Record this measurement in your table.
Table 1 Observations of Three Cells in Sodium Hydroxide Solution
Ratio of Distance colour
Length of one Area of one Total surface Volume of cell surface area: extended into
Cell side (mm) side (mm2) area (mm2) (mm3) volume cube (mm)
A
B
C
9. Repeat Steps 6 to 8 with cell B and then with (j) Imagine that sodium hydroxide represents a vital
cell C. nutrient needed throughout a living cell. Did all
10. Follow your teacher’s instructions for proper parts of each cell obtain the “nutrient” within
disposal of all used materials. the 10 min time period? Which cell was able to
have the nutrient diffuse into all (or most) of its
volume? Explain, using the terms surface area
Analyze and evaluate and volume. T/I
(a) What does the colour change in your cells (k) If all cell activity takes place in the cell’s interior
indicate about the diffusion of the sodium but all materials enter and exit through the cell’s
hydroxide? T/I
surface, explain the importance of the surface
(b) Did all of the cells change colour all the way area to volume ratio. T/I
through? Explain. T/I

(l) If all parts of a cell need a supply of a substance
(c) Calculate the area of one side of each cell. quickly, would it be better for the cell to be large
Record these values in your table. T/I
or small? T/I
(d) Calculate the total surface area (for all six (m) In what way(s) is a cube of agar a good model of
sides) of each cell. Record these values in your a cell? In what way(s) is it not a good model? A
table. T/I
(e) Calculate the volume (length 3 width 3 height) Apply and extend
of each cell. Record these values in your table. T/I
(n) Predict how temperature might affect the results

(f) Calculate the diffusion rate in millimetres per of this activity. Explain your reasoning. T/I
minute for each cell. Record this information in

(o) Predict how the concentration of sodium
your table. T/I
hydroxide might affect the results of this activity.

(g) How does the surface area to volume ratio Give reasons for your prediction. T/I
change as the cell gets larger? T/I
(p) In previous grades, you learned about the

(h) Answer the Testable Question. T/I
particle theory of matter. How does the
(i) Compare your answer in (h) to your Hypothesis/ particle theory relate to diffusion of substances
Prediction. Was your Prediction correct? T/I
throughout a cell? A
NEL 2.4 Conduct an Investigation 39

2.5 The Cell Cycle
As eukaryotic cells grow and divide, they move through three distinct stages.
cell cycle the three stages (interphase, These stages make up what is known as the cell cycle (Figure 1). The stages
mitosis, and cytokinesis) through which of the cell cycle are interphase, mitosis, and cytokinesis. Cells grow and
a cell passes as it grows and divides
prepare to divide during interphase. Cell division occurs during mitosis and
To watch an animation of the cytokinesis. You will learn about each of these three stages in more detail in
cell cycle, this section.
mitosis cytokinesis
cycle begins
cell
cell prepares to divide division
cell grows
e
int er phas
cell receives instructions

DNA replicates regarding division
Figure 1 The cell cycle consists of three stages: interphase, mitosis, and cytokinesis. Interphase is
the time between cell divisions when a cell grows.
The length of time it takes to complete one cycle varies. Embryonic cells
divide rapidly. Some of your body cells may take as much as 30 h for a cycle.
Very specialized cells, such as adult nerve cells, may never divide at all.
Interphase
Interphase is the longest stage for most cells, but it is not a resting stage.
interphase the phase of the cell cycle During interphase, the cell is carrying out all life activities except division.
during which the cell performs its normal These activities include growth, cellular respiration, and any specialized
functions and its genetic material is copied
functions of that cell type. During this stage, the genetic material, DNA
in preparation for the cell division
(deoxyribonucleic acid), is in very long, thin, invisible strands. When the
cell prepares for cell division, the strands are duplicated so that there are two
identical strands of the genetic material. More organelles are also formed.
mitosis the stage of the cell cycle in
which the DNA in the nucleus is divided;
the first part of cell division
Cell Division
Cell division occurs in two stages: mitosisthe division of the contents
cytokinesis the stage in the cell cycle
when the cytoplasm divides to form two of the nucleusand cytokinesisthe division of the rest of the cell, such
identical cells; the final part of cell division as cytoplasm, organelles, and cell membrane (Figure 2). Each cell division
daughter cell one of two genetically
produces two genetically identical cells called daughter cells.
identical, new cells that result from the Mitosis is composed of four phases: prophase, metaphase, anaphase, and
division of one parent cell telophase (PMAT). The cells move gradually from one phase to the next.

Figure 2 The three stages of the cell
cycle in which a parent cell grows,
duplicates its DNA, and divides into two
daughter cells.
Interphase Mitosis
DNA is copied A complete set Cytokinesis
of DNA collects Cell divides
at either end into two
of the cell daughter cells
Cell division
Prophase
As interphase ends, the cell enters the first phase of mitosis—prophase. The prophase the first stage of mitosis, in
long strands of DNA condense into a compact form, becoming visible under which the chromosomes become visible
and the nuclear membrane dissolves
a microscope as chromosomes (Figure 3(a)). Because the DNA was copied
during interphase, each chromosome consists of two identical strands called chromosome a structure in the cell
nucleus made up of a portion of the cell’s
sister chromatids. An individual strand is called a chromatid. The sister
DNA, condensed into a structure that is
chromatids are held together by a centromere. The nuclear membrane visible under a light microscope
dissolves during prophase.
chromatid one of two identical strands of
DNA that make up a chromosome
Metaphase
centromere the structure that holds
During metaphase, the chromosomes line up in the middle of the cell
chromatids together as chromosomes
(Figure 3(b)). This stage is easily recognized. All the chromosomes must be
in the line for mitosis to continue. metaphase the second stage of mitosis,
in which the chromosomes line up in the
middle of the cell
LEARNING Tip
Stages and Phases
There are three stages in the cell cycle:
interphase, mitosis, and cytokinesis.
Mitosis is divided into four phases. Even
though “interphase” ends with -phase,
do not get confused: it is a stage, not a
phase!
Figure 3 The first two phases of

(a) (b)
mitosis: (a) prophase and (b) metaphase
NEL 2.5 The Cell Cycle 41

Anaphase
anaphase the third phase of mitosis, in In anaphase, the centromere splits and the sister chromatids separate
which the sister chromatids separate into (Figure 4(a)). They are now called “daughter chromosomes.” These daughter
daughter chromosomes, and each moves
chromosomes move to opposite sides of the cell. Under the microscope, they
toward opposite ends of the cells
appear to be pulled apart.
Telophase
telophase the final phase of mitosis, Telophase is the final stage of mitosis (Figure 4(b)). The daughter
in which the chromatids unwind and a chromosomes stretch out, become thinner, and are no longer visible. A new
nuclear membrane reforms around the
nuclear membrane forms around each group of daughter chromosomes. At
chromosomes at each end of the cell
this stage, the cell appears to have two nuclei.
To see an animation of mitosis,
(a) (b)
Figure 4 The last two phases of mitosis: (a) anaphase and (b) telophase
Cytokinesis
Cytokinesis is the final stage of cell division. The cytoplasm divides,
producing two genetically identical daughter cells. The process of cytokinesis
is slightly different in plant and animal cells. In a plant cell, a plate between
the daughter cells develops into a new cell wall (Figure 5(a)). In an animal
cell, the cell membrane is pinched off in the centre (Figure 5(b)).
Figure 5 Cytokinesis in plant and

animal cells. (a) In a plant cell, a plate
develops into a new cell wall, sealing
off the contents of the new cells from
each other. (b) In an animal cell, the cell
membrane is pinched off in the centre
(a) (b)
to form two new cells.
Moving the Chromosomes

During mitosis, the movements of chromosomes are controlled by spindle
fibres: specialized structures that attach to the centromeres of each
chromosome. They begin forming during late interphase. During prophase
To learn more about the formation and metaphase, the spindle fibres pull the chromosomes into the middle
and action of spindle fibres, of the cell. Finally, during anaphase they pull the daughter chromosomes
GO TO NELSON SCIENCE toward opposite ends of the cell.
Cell Division—The Big Picture
Figure 6 shows how the stages of cell division fit into the cell cycle.
end of interphase prophase metaphase anaphase

telophase
The cell has grown. The DNA The chromosomes After the chromo- In the last phase of
cytokinesis
New organelles condenses, line up along the somes line up mitosis, the
have formed. DNA becoming shorter middle of the cell. along the middle chromosomes During cytokinesis,
has been replicated and thicker and The nuclear of the cell, each reach opposite the cell’s beginning of
in the nucleus. forming chromo- membrane chromosome ends of the cell cytoplasm divides. interphase
somes. Each completely separates into two and start to In an animal cell,
the cell is pinched The two new
chromosome is dissolves. identical single- lengthen. A new
off in the centre, daughter cells
made up of two stranded parts nuclear membrane
forming two new enter interphase,
identical chroma- (formerly the begins to form
daughter cells. In a and the cell cycle
tids. The nuclear chromatids; now around the
plant cell, a plate continues.
membrane starts the daughter chromosomes at
to dissolve, chromosomes). each end of forms that
releasing the The spindle fibres the cell. becomes a cell
chromosomes into pull the daughter wall, sealing off
the cytoplasm. chromosomes the contents of the
toward each end of new cells from
the cell. each other.
Figure 6 The stages of cell division
Checkpoints in the Cell Cycle DID YOU KNOW?
During the cell cycle, the cell’s activities are controlled at specific points, or Discovering Cell Cycle Checkpoints
The discovery of the key proteins that
checkpoints. At each checkpoint, specialized proteins monitor cell activities
regulate the cell cycle merited the
and the cell’s surroundings. These proteins send messages to the nucleus. Nobel Prize in Physiology or Medicine
The nucleus then instructs the cell whether or not to divide. A cell should 2001. This prize was jointly awarded to
remain in interphase and not divide if three researchers: Leland H. Hartwell
from the United States and Tim Hunt
• signals from surrounding cells tell the cell not to divide and Sir Paul M. Nurse from the United
• there are not enough nutrients to provide for cell growth Kingdom.
• the DNA within the nucleus has not been replicated GO TO NELSON SCIENCE
• the DNA is damaged

If the DNA is damaged and it is early enough in the cell cycle, there may
be enough time for the cell to repair the damaged DNA. If there is too much
damage to the DNA, the cell is usually destroyed. This is a vital process that
helps keep organisms healthy.
NEL 2.5 The Cell Cycle 43

T RY THIS IDENTIFY THE PHASES OF MITOSIS
SKILLS: Observing, Evaluating, Communicating SKILLS HANDBOOK
5., 6.A.
Explore an online resource to help you identify cells in different A. Which phase of mitosis did you have the most trouble
stages and phases of the cell cycle. identifying? How will you identify this phase in the future? K/U
B. Compare the proportion of cells in the various stages and

phases of the cell cycle. Write a statement summarizing the
percentage of cells in the different stages and phases. K/U
1. Examine the images of cells at various stages of the cell
cycle on the suggested websites. Study the descriptions of C. Draw a circle graph showing the percentage of cells in each
the different phases of mitosis. Identify which phases are phase of mitosis. K/U
illustrated. D. Which phase of mitosis takes the most time? Explain how
2. Calculate the percentage of cells in each stage or phase. you arrived at your answer. T/I
IN SUMMARY
• Cells follow a cell cycle that includes growth and • Mitosis is followed by cytokinesis, which results
preparation for division (interphase) followed by in the entire cell dividing into two new daughter
cell division (mitosis and cytokinesis). cells.
• In interphase, the cell carries out all of the • Animal cell cytokinesis features the cell pinching
normal cell activities, including copying its DNA. off to form two daughter cells.
• Mitosis is the division of the nucleus into • Plant cell cytokinesis features a new cell wall
two identical nuclei. Mitosis has four phases: forming to separate the two daughter cells.
prophase, metaphase, anaphase, and telophase
(PMAT).
CHECK YOUR LEARNING

1. During which stage of the cell cycle does replication of the 5. Which stage or phase of the cell cycle corresponds to
DNA occur? K/U each of the descriptions below? K/U
2. Why is it necessary that the cell copies its DNA? K/U (a) A new cell wall begins to form.
3. Why are chromosomes visible during mitosis but not at (b) The membrane of the nucleus dissolves.
other times? K/U (c) Daughter chromosomes begin to separate.
4. Under a microscope, some cells can appear to be (d) The cell begins to pinch together along its centre.
between metaphase and anaphase (Figure 7). Explain this (e) Thick chromosome threads are visible in two distinct
observation. T /I regions of the cell.
(f) The cell grows and copies its DNA.
6. Create a table to summarize what happens during the
three stages of the cell cycle. K/U C
7. Biology books used to describe interphase as the “resting
phase.” Based on what we know now, what was wrong
with this term? K/U
Figure 7
SCIENCE OSSLT
Aging: It Is in Our Cells

“Aging seems to be the only available way to live a long life.” So
said French composer Daniel-François-Esprit Auber. Why the body
ages is one of the mysteries of science, but scientists all over the
world are getting excited as the answer seems to be within our
grasp: it is in the cells (Figure 1).
Figure 2 Telomeres, the region at the end of each chromosome, get

shorter with age.
New research has revealed another possible link between

cell division and aging: centromere location. In older fruit flies, the
centromeres sometimes do not align properly during metaphase
Figure 1 Why we grow old is one of the mysteries of science. because the proteins responsible for alignment are missing or
malfunctioning. Cell division is stalled until the centromeres line
Aging is complicated, but scientists have recently discovered up properly (Figure 3). The proteins that “stand guard” over the
some clues as to what causes cells in our bodies to stop dividing orientation of centromeres could be key to the rate of cell division.
and eventually die. One of these clues is that, starting in middle
age, there is an increasing number of faulty cell divisions. This
results in a gradual increase in cells throughout the body that do
not function properly, which leads to problems such as Alzheimer’s centromere
disease and osteoporosis. Sometimes errors in cell division
directly affect one part of the body by damaging critical genetic
information. For example, cells contain a gene called COX-2, which
makes an essential protein. Errors during DNA duplication and
cell division occasionally produce defective copies of this gene in
daughter cells that can lead to heart and kidney failure. Sometimes
genes that are related to general cellular function and maintenance
stop functioning. In fact, scientists have identified hundreds of
genes that are directly linked to development and aging. These are
the “aging genes,” featured in the online catalogue GenAge. Figure 3 In aging cells, division may stall until the centromeres are
Chromosomes change as we age. Telomeres are regions lined up properly.
of DNA located at the end of each chromosome (Figure 2). Their Scientists are exploring aging genes, telomeres, and
function is to protect the chromosomes from damage during cell centromere “guards” very closely. Not only do they hold the secrets
division, much like the plastic covering on the end of a shoelace. of aging, they also hold the secrets of cancer. Aging and cancer are
As a cell ages, the telomeres on chromosomes get shorter. When two sides of the same coin: not enough cell division or too much
telomeres get too short, cell division stops altogether. It is almost cell division. Solving one mystery may solve the other too.
as though the telomeres are clocks, counting down the number of
divisions that the chromosome can undergo.
NEL 45
Observing Cell Division SKILLS MENU

In this activity, you will observe prepared slides and photographs of cells Hypothesizing Observing
that, when living, were dividing quickly. You will examine plant cells Planning Evaluating
from a root tip and animal cells from a fish embryo. In Part A, you will Controlling Variables Communicating
identify characteristics of cells that are dividing quickly. In Part B, you
will identify three stages of the cell cycle and the four phases of mitosis
in each organism.
Purpose 2. View the slide at low power. Bring it into focus

Part A: To observe and identify onion root tip (plant) using the coarse-adjustment knob. Begin a
cells and whitefish embryo (animal) cells that are labelled scientific drawing that depicts the
dividing quickly. cell cycle stages that you observe. Include an
Part B: To identify the stages of the cell cycle and appropriate title.
phases of mitosis in each organism. 3. Move the slide until you can see an area of cells
showing different stages of mitosis, similar
Equipment and Materials to the view shown in Figure 2. Change to the
• microscope medium-power objective lens. Use only the fine-
adjustment knob to focus this view. Identify cells
• prepared microscope slide of onion root tip,
that are undergoing mitosis or cytokinesis and
longitudinal section
cells that are in interphase. Centre the slide so
• photographs of whitefish embryo cells
that you can see several cells that are dividing.
• lens paper Add details to your drawing.
Procedure SKILLS HANDBOOK

2.D., 3.B.6.
Part A: Observing Actively Dividing
Cells
1. Clean the onion root tip slide with lens paper.
Place the slide on the stage of your microscope,
aiming for the cells just above the root cap (the
U-shaped covering of tissue at the tip of the
root) and slightly to one side. Use Figure 1 as
your guide.
region where mitosis Figure 2 Onion root tip cells in various cell cycle stages,
is most visible including some of the phases of mitosis
root cap
Part B: Identifying Phases of Mitosis

4. Move the high-power objective lens into place.
Do not allow the objective lens to touch the
slide or the stage. Locate cells in the different
stages of the cell cycle: mitosis, cytokinesis, and
interphase. Make labelled diagrams of these cells.
Figure 1 Cells above the root cap are the best ones for
observing mitosis.

5. Look closely at the cells that are undergoing (i) Some herbicides, such as 2,4-D, are believed
mitosis. Identify at least one cell in each of the to make plant cells divide more rapidly than
four phases of mitosis: prophase, metaphase, normal. Why would this kill plants? Why might
anaphase, and telophase. Make labelled diagrams this be dangerous to humans if it had the same
of these cells. effect on human cells? T/I A
6. Return the microscope to low power and remove (j) What do you think would happen if two
the onion root tip slide. Return the equipment to daughter cells of an organism did not have
your teacher. identical chromosomes after division? T/I
7. Observe the photographs of whitefish egg cells GO TO NELSON SCIENCE

in Figure 3 (or similar photos provided by your
teacher). Find cells in all stages of the cell cycle.
(Note that these photographs are not in “PMAT”
order.)
8. Draw and label diagrams of these cells in
interphase, prophase, metaphase, anaphase,
telophase, and cytokinesis. (a)

(a) Suggest why onion root tips and whitefish
embryos were chosen as examples in this
activity. T/I
(b) Do actively dividing cells look different

from cells that divide less often? Explain your (b)
observations with reference to the onion
root tip. T/I
(c) Given what you know about the cell cycle, give
reasons for your answer in (b). T/I
(d) Compare the appearance of the animal cells with

that of the plant cells during interphase, mitosis, (c)
and cytokinesis. You may use a graphic organizer
to show your comparison. T/I C
(e) Describe the differences you observed between

plant and animal cells during cytokinesis. T/I
(f) Which phases were the most difficult to

distinguish between? Why? T/I
(d)
Apply and Extend

(g) Where were the actively dividing cells found in
the root tip? Explain this observation. (Hint:
What plant activity requires cell division?) T/I
(h) Would you expect whitefish embryo cells to

continue to divide indefinitely? Explain why or
(e)
why not. A
Figure 3 Whitefish embryo cells divide rapidly, so many of

them are in the mitosis stage of the cell cycle.

2.7 Cell Division Going Wrong: Cancer
cancer a broad group of diseases that Cancer is a group of diseases in which cells grow and divide out of control
result in uncontrolled cell division It results from a change in the DNA that controls the cell cycle. This change
prevents the cells from staying in interphase for the normal amount of time.
READING Tip One or more of the checkpoints (addressed in Section 2.5) fails, so the cell
Making Connections and all of its subsequent daughter cells continue to divide uncontrollably.
While reading a text, whenever you read Some types of cancer run in families, whereas others are triggered
a part that reminds you of a related
by environmental factors. Some cancers may have both hereditary and
experience that you, your family, or
friends have had, jot it down on a sticky environmental causes. Cancer is not infectious: you cannot catch it from
note and attach it to the text. After someone who has it.
reading, you can review and synthesize Cancer is a serious concern for humans, but many other organisms, such as
your text-to-self connections. cats, dogs, fish, and even plants, can also develop cancer.
Cell Growth Rates and Cancer

A cancer cell is one that continues to divide despite messages from the
nucleus or the surrounding cells to stop growing and dividing. The
cell’s checkpoints may fail to identify problems or kill off the cell. The
tumour a mass of cells that continue uncontrolled growth and division may create a rapidly growing mass of cells
to grow and divide without any obvious that form a lump or tumour (Figure 1). The cells of the tumour may stay
function in the body
together and have no serious effect on surrounding tissues. This is called
benign tumour a tumour that does not a benign tumour. Cells in a benign tumour are not cancerous. However,
affect surrounding tissues other than by sometimes a benign tumour can grow so large that it physically crowds
physically crowding them nearby cells and tissues. This can affect their normal function.
malignant tumour a tumour that A mass of cells is a malignant tumour if it interferes with the function
interferes with the functioning of of neighbouring cells and tissues, such as the production of enzymes
surrounding cells; a cancerous tumour
or hormones. Malignant tumours may even destroy surrounding tissues.
To watch an animation of cancer The cells in a malignant tumour are considered cancerous.
cell growth over 24 hours, In some cases, cancer cells break away from the original (primary)
GO TO NELSON SCIENCE tumour and move to a different part of the body. If they settle there
and continue growing and dividing uncontrollably, they can start a new
(secondary) tumour (Figure 2 on the next page). This process is known
metastasis the process of cancer as metastasis and is one of the reasons why cancer is such a dangerous
cells breaking away from the original disease.
(primary) tumour and establishing another malignant (cancerous)
(secondary) tumour elsewhere in the body tumour affects
surrounding cells
metastatic (cancerous)
cells leave the tumour
and start a secondary
tumour elsewhere
Figure 1 A tumour is a mass of cells normal potentially
with no function. A tumour can remain cell cancerous
benign, or it can become malignant. cell
Tumour cells can metastasize, spreading benign (non-cancerous)
to other areas of the body. Malignant tumour does not affect
and metastatic tumours are considered normal uncontrolled surrounding cells, unless by
cancerous. cell division cell division physically crowding them

blood
vessel
tumour metastatic tumour is
established by these
migrating cells
cells from original

tumour may break
through blood
vessel walls and
travel to other Figure 2 Cancer cells sometimes break
areas of the free from the primary tumour site. These
body metastatic cells can then move through
the blood vessels. Secondary tumours
may develop at other sites.
Causes of Cancer
Every time a cell divides, its DNA is faithfully duplicated. Usually, this process
is error-free and the genetic information in the daughter cells is exactly the
same as that in the parent cell. Sometimes, however, random changes occur
in DNA. These random changes are known as mutations. These changes may mutation a random change in the DNA
either result in the death of the cell or allow the cell to survive and continue to
grow and divide. Very rarely, the change occurs in the DNA that controls cell
division. Once this crucial cell cycle DNA starts behaving abnormally, the cells
may become cancerous and proliferate wildly through repeated, uncontrolled
mitosis and cytokinesis. They multiply until all nutrients are exhausted. carcinogen any environmental factor that
Some mutations are caused by carcinogens: environmental factors that cause causes cancer
cancer. Well-known carcinogens include tobacco smoke; radiation, such as X-rays
and UV rays from tanning beds and sunlight; some viruses, such as human To find out about some of the
myths relating to things that
papillomavirus (HPV) and hepatitis B; certain chemicals in plastics; and many cause, or cure, cancer,
organic solvents. If a group of people is exposed to a carcinogen, some will develop GO TO NELSON SCIENCE
cancer, but others will not. This is a major challenge for cancer researchers because
they cannot predict who will develop cancer. Until this process is completely
understood, it is best to limit your exposure to carcinogens.
nasal cavity
Some cancers appear to be at least partly hereditary. This means that mouth
pharynx
the DNA passed from one generation to the next may contain information larynx (upper throat)
that leads to disease. These cancers include some breast cancers and some esophagus
colon cancers. A genetic link makes it more likely that you will develop a
lung
particular type of cancer, but it does not guarantee that you will get cancer.
Smoking and Cancer

stomach
Lung cancer is one of the most common types of cancer in Canadians over 40. liver
kidney
According to Health Canada, smoking currently causes 9 out of 10 cases of
lung cancer. Carcinogens in tobacco affect more than just the lungs. Smoking
also increases the risk of over a dozen other types of cancer (Figure 3). The
good news is that most of these smoking-related cancers can be prevented bladder
by giving up smoking—or never starting in the first placeand staying away
from second-hand smoke.
Figure 3 The carcinogens in tobacco
smoke can affect all of these parts of
the body.
NEL 2.7 Cell Division Going Wrong: Cancer 49

Cancer Screening
READING Tip Cancer screening means checking for cancer even if there are no symptoms.
Making Connections
Different types of cancer can be screened for in different ways. Cancer
Text-to-world connections involve screening can be done at home, as part of a routine medical checkup, or
facts about the world that you have with a special appointment. Screening is especially important for people
collected during your lifetime. This type who have a family history of certain cancers (such as breast cancer or
of connection can be very useful when
colon cancer). If you have a family history of cancer, you may choose to go
reading a science text because it can
help you take a more critical approach through genetic screening. This will determine if you have inherited DNA
to the ideas and information in the text. that is linked to cancer. Screening can also be valuable for people who are
exposed to carcinogens at work or because of their lifestyle.
Screening does not prevent cancer, but it does increase the chance of
detecting cancer early enough to successfully treat it. This is one important
way to reduce your risk.
Many women take responsibility for their health by performing regular
breast self-examinations to check for lumps that may indicate breast cancer.
Women can also be screened for early signs of cervical cancer, starting
Pap test a test that involves taking around age 18, by getting a regular Pap test. This is a procedure in which a
a sample of cervical cells to determine doctor takes a sample of cervical cells, which are checked for cancer.
if they are growing abnormally
Men can detect testicular cancer early through testicular self-examination.
There is also a blood test, called the PSA test, that a doctor can prescribe to
To determine what your
checkup checklist looks like, screen for prostate cancer. This is not widely used for men under the age of
GO TO NELSON SCIENCE 50 as the incidence of prostate cancer is lower for that age group.
Other screening tests include a blood test for colon cancer and regular
skin checks by a doctor or dermatologist to look for changes in moles, new
growths, and sores. You can learn to check your own skin regularly for moles.
Table 1 illustrates the “ABCD of moles.” The letters stand for Asymmetry,
Border, Colour, and Diameter. If you see any suspicious-looking moles or
growths, ask your doctor or dermatologist to check them out.
Table 1 The ABCD of Moles
Asymmetry Border Colour Diameter

Benign
Malignant
Reducing Your Cancer Risk

Cancer prevention and early detection are very important. Many factors can
affect your risk of getting cancer. These risks include your personal and family
medical history, carcinogens in your environment, and your lifestyle choices.
Inform yourself about these factors so that you can minimize your exposure
to known cancer risks. You cannot change your family history, and some
aspects of your environment are beyond your control. You can, however, make
lifestyle choices that have a big impact on your likelihood of getting cancer.
RESEARCH THIS CANCER SCREENING AND PREVENTION
SKILLS HANDBOOK
SKILLS: Defining the Issue, Researching, Identifying Alternatives, Defending a Decision, Communicating 4.B., 4.C.
Each year, approximately 150 women in Ontario die because A. Analyze the information that you have collected. Decide which
of cervical cancer. There is no single cause of cervical cancer, of the cancer-reduction approaches you support. Write a
but research has shown that the main risk factor is untreated statement of your decision, including your rationale. T/I C A
infection with human papillomavirus (HPV). By preventing B. What questions do you still have regarding screening and
HPV infections, the risk of developing cervical cancer can prevention for this type of cancer? How do you think answers
be reduced. to these questions could be found? T/I
1. Research cervical cancer, or another type of cancer, C. In your class, debate the medical and ethical issues
to discover why it is particularly dangerous. surrounding cancer screening and prevention. C A
2. Research information about ways to reduce the risk from
your chosen type of cancer. Search a number of sources.
Lifestyle Choices
There are many lifestyle choices, besides avoiding tobacco smoke, that can
help reduce your risk of developing cancer. A healthy diet including a lot of
fruits and vegetables and less fatty meat may help. Research has shown that
certain “super foods” contain substances that help your body protect itself
from cancers (Figure 4). Even though vitamin supplements may include To read about a Canadian
some of these substances, the best way to obtain them is by eating the food researcher studying factors
itself. These super foods do not prevent cancer; rather, they lower your that affect prostate cancer,
cancer risk. GO TO NELSON SCIENCE
The risk of some cancers increases with the amount of body fat a person
has. A healthy diet may aid weight loss, which could lower the risk of cancer.
DID YOU KNOW?

Antiperspirants and Breast
Cancer—A Myth?
There is no known link between using
antiperspirants and breast cancer.
This is a myth that has been spread
tomatoes
tomatoes carrots
carrots avocados
avocados grapefruit
grapefruit
tomatoes carrots avocados grapefruit using e-mail and the Internet. A
study in 2002 found no increase in
breast cancer risk for women using
antiperspirants or deodorants, even
right after shaving their underarms.
red grapes
red broccoli garlic raspberries
red grapes
grapes broccoli
broccoli garlic
garlic raspberries
raspberries
Figure 4 These cancer-fighting “super

foods” are rich in many substances that
nuts
nuts cabbage
cabbage figs
figs help keep you healthy.
nuts cabbage figs

CITIZEN ACTION
Cancer Education and Research
SKILLS HANDBOOK
4.C.7.
The Canadian Cancer Society (CCS) works to educate people on the Decide how you would like to get involved. You may make this
lifestyle factors that can lead to cancer, what we can do to prevent decision by doing online research, talking to a cancer agency
cancer, and how to find cancer in its earliest stages. staff member or a researcher, or some other way. Prepare a
Cancer research is expensive and time-consuming. It can take written or verbal message to your fellow students to get them
years of work before a single research study is completed. excited about your cause.
There is only so much money to go around. Every year, many
worthy research projects go unfunded.
What Can You Do to Help?
One person can make a differencejust look at Terry Fox! He was
18 years old when he was diagnosed with bone cancer in his right
leg. The only treatment at that time was to amputate his leg just
above the knee. This remarkable young man brought international
awareness to the importance of cancer research by deciding to run
a cross-country marathon. He ran more than 5 000 km from St.
John’s, Newfoundland, to Thunder Bay, Ontario, before discovering
that the cancer had spread to his lungs. He died on June 28, 1981,
at the age of 22. The efforts of this heroic young Canadian have
inspired others to raise hundreds of millions of dollars in his name
to fund cancer research.
There are many opportunities to volunteer in your local
community to increase cancer awareness or raise funds. Figure 5 Terry Fox on his Marathon of Hope
Diagnosing Cancer
In some cases, a growing tumour creates swelling or causes discomfort.
In other cases, the patient may feel very tired or start losing weight for no
apparent reason. The earlier a cancer is diagnosed, the better the chances
of it being successfully treated. If cancer is suspected, the doctor will order
medical tests to investigate further. These tests can include blood tests and
special imaging techniques.
Figure 6 An endoscope
Imaging Technologies
Imaging techniques may include endoscopy, X-ray, ultrasound,
CT scanning, and MRI.
An endoscope is commonly used to screen for colon cancer. The
endoscope is made up of a fibre-optic cable to deliver light, a tiny camera,
and a cable that sends the images to a screen (Figure 6). Tools, such as
forceps, can also be attached. The patient may be given a sedative before the
endoscope is inserted into the colon through the rectum. The camera allows
the doctor to look for abnormal growths. Forceps can be used to remove
a small sample (biopsy) of any suspicious-looking growth. The sample can
then be studied under a microscope.
You may already be familiar with X-rays. Doctors use X-ray images to
Figure 7 Chest X-ray of a patient with view parts of the body such as bones and lungs (Figure 7). A mammogram
lung cancer (red areas). is a specialized X-ray technique for imaging breast tissue.

X-rays can also cause DNA damage. They are particularly harmful to READING Tip
rapidly dividing cells such as those in a growing fetus. For this reason, Recording Connections
women who are pregnant should not undergo X-ray examinations. Make a double-entry diary labelled
Another imaging technique that you may already be familiar with is “Connections” and “Understanding.”
Use the left side to record text-to-
ultrasound imaging. Ultrasound imaging uses ultra–high-frequency sound
self, text-to-text, and text-to-world
waves to create a digital image. The digital image allows doctors to view connections. On the right side, explain
certain soft tissues, such as the heart or the liver (Figure 8). how the connections helped you to
Another commonly used imaging technique is a CT or CAT scan better understand the text by visualizing,
(computerized axial tomography). A CT scan allows the X-ray technician making predictions, inferences, or
judgements, forming opinions, drawing
to take multiple X-rays of the body from many different angles. The images
and supporting conclusions, or
are then assembled by computer to form a series of detailed images. This evaluating.
technology allows doctors to view parts of the body that cannot be seen with
a conventional X-ray scan (Figure 9).
A fourth imaging technique is MRI (magnetic resonance imaging)
(Figure 10). In an MRI, radio waves and a strong magnetic field create
images with more detail than a CT scan. Computers can assemble the
information into three-dimensional models.
Figure 8 Ultrasound scan of the liver, Figure 9 CT scan of a cross-section of the

showing increased blood flow (orange areas) body, showing cancer tumours (darker red Figure 10 MRI scan showing brain cancer
due to malignant tumours areas) in a liver (green area)
Examining Cells
If any of the medical tests or images show abnormalities, the next step is to
examine a sample of the suspected cancer cells under a microscope. This is
the only way to confirm a diagnosis of cancer.
Certain cell samples can be obtained easily, such as blood cell samples.
Leukemia is a cancer that affects the blood, often resulting in a high ratio of
white blood cells to red blood cells. An experienced technician can identify
this problem when looking at a sample of blood through a microscope.
A sample of tumour cells may have to be removed surgically. This
technique is known as “taking a biopsy.” The sample is then viewed under
a microscope. It may also be tested for genetic abnormalities. If the tumour
cells are determined to be non-malignant (not cancerous), then the tumour
is diagnosed as benign. Cancer cells are often irregularly shaped and may
be smaller or larger than the surrounding cells. Experienced medical
professionals can identify cancer cells just by looking at them (Figure 11).
After diagnosis, the doctors must discover where the cancer originally
Figure 11 Illustration of cancer cells
began. They also need to find out how large the tumour is, how quickly it
(shown in purple) among normal cells
is growing, and whether the cancer has spread. This information helps to (pink). Notice that the cancer cells have
determine suitable treatments and to predict the outcome. irregular shapes.

Treatments for Cancer
The goal of cancer treatment is to slow down the growth of the tumours
or destroy as many cancer cells as possible. Currently, there are three
main conventional methods of treating cancer: surgery, chemotherapy,
and radiation therapy. An emerging technique is biophotonics. A cancer
treatment plan may consist of one or a combination of these methods.
To learn more about working in Cancer treatment involves a team of medical specialists that may include
the field of medical oncology, surgeons, medical oncologists (doctors who specialize in cancer diagnosis
GO TO NELSON SCIENCE and treatment), radiation oncologists, and oncology nurses.
Surgery
To find out the wait times for Surgeryphysically removing the cancerous tissueis sometimes the
cancer surgery in your area, preferred way of treating cancer. If the tumour is easily accessible and fairly
GO TO NELSON SCIENCE well defined, the doctors may recommend this option.
Chemotherapy
DID YOU KNOW?
Chemotherapy is a method of treating cancer using drugs. These work by
slowing or stopping the cancer cells from dividing and spreading to other
The Blood-Brain Barrier
It is very difficult to deliver treatment parts of the body, and by killing the cells. The drugs can be injected or taken
drugs to tumours in the brain. This orally (by mouth). Side effects may include hair loss, nausea, and fatigue, but
is because a barrier of dense cells the benefits of the treatment generally outweigh the negative effects.
prevents most chemicals from passing Chemotherapy is often one of the first stages of cancer treatment. Its aim
from the blood into the brain.
is to shrink a tumour for surgical removal or for radiation treatments. A
huge advantage of chemotherapy is that the drugs travel throughout the body
and reach almost all tumours, even if they are much too small to be detected.
Radiation
READING Tip Cancer cells are easily damaged by ionizing radiation because they divide
Cross-Checking Connections rapidly. Radiation therapy takes advantage of this. The DNA of many of the
Use sticky notes while reading to make daughter cells is damaged by the radiation, so the cells cannot divide further.
text-to-text connections with other texts The radiation is directed at the tumour either by using a focused beam
you have read or viewed. After reading
or by implanting a radioactive source into the tumour (Figure 12). This
you can check these connections to see
whether the new information matches
minimizes side effects.
or challenges what you already know.
Figure 12 Radiation therapy is delivered by very technologically advanced machines.

Biophotonics
The newest weapon in the fight against cancer, biophotonics, uses beams of biophotonics the technology of using
light to detect and treat cancer. It is a very sensitive diagnostic tool, allowing light energy to diagnose, monitor, and treat
for early detection of cancer. It has fewer side effects than conventional living cells and organisms
radiation treatment as it can more accurately target the cancerous tissue.

Much of this research is being pioneered at the University of Toronto.
To read more about the
Scientific research and technological advancements play an important development of biophotonics at
part in understanding cell biology. Canadian researchers are at the forefront the University of Toronto,
in discovering better ways to prevent, diagnose, and treat cancer. GO TO NELSON SCIENCE
UNIT TASK Bookmark

The information about cancer diagnosis and treatment may be useful to you as you work
on the Unit Task described on page 156.
IN SUMMARY
• Cancer is a group of diseases that result from • Various imaging technologies, including
uncontrolled cell growth. endoscopy, X-ray, ultrasound, CT scanning, and
• Tumours can be benign (non-cancerous) or MRI, can be used to identify abnormalities and
malignant (cancerous). diagnose cancer.
• Some cancer cells are able to move to new areas • Biopsy is a method of diagnosis in which
of the body in a process called metastasis. a sample of cells is surgically removed and
examined under a microscope.
• Many early stages of cancers have no noticeable
symptoms. • Many screening tests are available to diagnose
cancer early and improve treatment success rates.
• Cancer risks can be reduced through avoiding
carcinogens and by making healthier lifestyle • The main treatment methods for cancer include
choices. surgery, chemotherapy, and radiation. A newer
technology is biophotonics.
CHECK YOUR LEARNING

1. How is the behaviour of cancer cells different from that of 6. Briefly describe the three main conventional methods of
normal cells? K/U treating cancer. K/U
2. (a) Can a person inherit cancer genetically? Explain. 7. Why might a doctor be concerned to find cancer cells in a
(b) Can you catch cancer from a person who has cancer? patient’s blood? K/U
Explain. K/U 8. Identify at least three simple lifestyle changes that could
3. (a) What is a carcinogen? help reduce your risk of developing cancer. K/U
(b) Give some examples of carcinogens that may be 9. What cancer screening tests should young adults include
present in your everyday life. A in their cancer-fighting plan? K/U
4. Why might it be easy to overlook cancer in its early 10. Why might there be a risk of cancer recurring, even when
stages? K/U surgery is performed to remove a malignant tumour? K/U
5. List at least five diagnostic techniques used to detect
cancer. K/U

Comparing Cancer Cells and SKILLS MENU

Normal Cells Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
In this activity, you will examine microslides or prepared slides to Controlling Variables Communicating
compare normal cells with cancer cells of the same type. You will
look for evidence that the cells are dividing at different rates.
Purpose 3. Count the number of cells that are dividing.

To compare the rate of cell division in cancer cells Include cells in both mitosis and cytokinesis.
and normal (non-cancer) cells. (Mitosis is the stage during which the
chromosomes are visible as dark, threadlike
Equipment and Materials structures. Cytokinesis is the stage during which
the cell splits into two).
• microslide or prepared slides of normal cells
and cancer cells 4. Estimate the percentage of cells that are dividing,
using the formula
• microviewer or microscope
• lens paper number
total number of cells 
of dividing cells
× 100 %
SKILLS HANDBOOK
Procedure 2.D., 3.B.6. 5. Make a scientific drawing of a small area

1. Carefully clean the microslide or slide with a showing about 10 typical cells.
sheet of lens paper. 6. Repeat Steps 3 to 5, this time looking at a section
2. Use the microviewer or microscope to observe of cancerous tissue (Figure 2). Be sure to observe
a section of healthy tissue (Figure 1). If you are the same type of tissue as you observed in Step 3.
using a microscope, start at low power before 7. Return the equipment to your teacher.
moving on to medium and high power. Record
your observations. Note the size and shape of
the cells, their arrangement, and any significant
structures in the cells.
Figure 1 Sample of healthy skin cells Figure 2 Sample of cancerous skin cells
Analyze and Evaluate (f) Normal cells have internal regulators that control
(a) What did you observe about the organization of division. This prevents cells from becoming
the normal cells compared with the organization overcrowded. From your observations, do you
of cancer cells? T/I
think that these internal regulators are working
in cancer cells? Explain.T/I
(b) Describe any differences in the size and shape of

the two types of cells. T/I
(g) Summarize the differences that you observed
between cancer cells and normal cells. K/U
(c) What did you observe about the nuclei of normal

cells compared with the nuclei of cancer cells? T/I
(d) (i) What percentage of normal cells were

Apply and Extend
actively dividing? (h) Cell division requires energy. Suggest how
this may explain why cancer is harmful to
(ii) What percentage of cancer cells were actively
surrounding cells. A
dividing?
(i) Carcinogens sometimes cause cancer. What cell
(iii) Compare the rate of cell division in cancer
structure(s) is/are affected by carcinogens? Give
cells to the rate in normal cells.
T/I
reasons for your answer. A
(e) After normal cell division, daughter cells are the

same type of specialized cell as the parent cell.
Did the cancer cells appear to be specialized?
Refer to your observations. T/I

2.9 Specialized Cells
In this chapter, you have looked at plant and animal cells as they grow and
divide. You have seen that different cells have greater numbers, or fewer,
of certain organelles depending on the function of the cell. You have also
learned how cells sometimes grow out of control, forming tumours. Next
you will look at some of the wide variety of different cell types—each with
its own special function—that make up the bodies of plants and animals.
The cell theory states that every cell comes from a previously existing cell.
You started life as a single fertilized egg. A towering maple tree also started
as a single cell. The many cells in a complex organism are not all identical,
however. Look at your best friend or any other living thing around you: they
are made up of cells with different structures and different functions.
You can compare a multicellular organism to a large city. The city needs
energy, transportation corridors, waste disposal facilities, a police force,
and organization to keep everything operating efficiently. Different parts of
the city have different purposes, and different businesses in the city meet
different needs. Auto mechanics repair damaged cars. Dental hygienists help
us keep our teeth healthy. Farmers grow and provide food. The list goes on.
You do not expect the same person to repair your car, clean your teeth, and
sell you food. Each of these jobs is performed by someone who is trained to
do that job: a specialist.
Your body has needs similar to those of a city: energy, transportation,
waste disposal, and so on. Every cell cannot digest food, fight disease, carry
nutrients, and coordinate your body’s movements. Similar to people working
specialized cell a cell that can perform a in a city, specialized cells have physical and chemical differences that allow
specific function them to perform one job very well. Figure 1 shows some of the different
kinds of cells that line the trachea—the tube that carries air from the mouth
to the lungs. Notice the orange-stained goblet cells. They contain many
Golgi bodies to produce mucus.
Cell specialization involves a change in form and in function. Specialized
cells can look very different from each other.
Figure 1 These specialized cells help to keep dirt out of the lungs. The orange cells are goblet cells.
They secrete mucus. The parts that look like green grass are cilia—hair-like extensions of cells. The
cilia can move. They move mucus along the trachea to trap and remove any inhaled dust and dirt.
Animal cells show a wide variety of specializations, as Figure 2 shows.
They differ internally as well as externally. Cells such as muscle cells that
use a lot of energy, for example, have a lot of mitochondria. Similarly, cells
that produce mucus in the intestine have many Golgi bodies. These cells are
specialized to perform particular functions.
(a) (d) (g)
Red blood cells contain hemoglobin that carries Layers of skin cells fit together tightly, cover- Bone cells collect calcium from food and allow
oxygen in blood. The cells are smooth so that ing the outside of the body to protect the cells the growth and repair of bones. They build up
they can easily pass through the blood vessels. inside and to reduce water loss. bone around themselves, creating the body’s
skeleton.
(b) (e) (h)
Muscle cells are arranged in bundles called White blood cells can move like an amoeba to Sperm cells are able to move independently,
muscle fibres. Muscle cells can contract, which engulf bacteria and fight infection. carrying DNA from the male parent to join with
makes the fibre shorter and causes bones to an egg cell from the female parent.
move.
(c) (f) (i)

Fat cells have a large vacuole in which to store Nerve cells are long, thin, and have many Some animals that are active mainly at night,
fat molecules. This is how the cell stores chemi- branches. They conduct electrical impulses to and others that live deep in the ocean, have
cal energy. coordinate body activity. cells that can emit light. These cells are called
photophores.
Figure 2 A few of the many kinds of specialized cells found in animals
NEL 2.9 Specialized Cells 59
Plants also have specialized cells. The structure and function of the cells
in a leaf are different from those of the cells in the trunk of a tree. Some of
the specialized plant cells are shown in Figure 3.
In the next chapters, you will learn how cells work together in complex
organisms. Chapter 3 focuses on animals and Chapter 4 on plants.
(a) (c) (e)
Some plant cells transport water and dissolved Storage cells contain special structures that Photosynthetic cells contain many
minerals throughout the plant. store starch, a source of energy for the plant. chloroplasts to collect energy from
sunlight to make sugar for the plant.
(b) (d) (f)
Other cells transport dissolved sugars around Epidermal cells on young roots have hairs that Guard cells in the surface of leaves control
the plant. absorb water from the soil. water loss.
Figure 3 Plants also have a wide variety of specialized cells.
IN SUMMARY
• All multicellular organisms are made mostly of • A specialized cell performs one primary function
specialized cells. instead of doing everything an organism needs to
• Specialized cells have structures that allow them stay alive.
to perform specific functions.
CHECK YOUR LEARNING

1. Why are complex organisms made up of specialized 4. Every cell in your body came from one fertilized egg
cells? K/U cell. What does this tell you about the DNA differences
2. Think about your own body. List at least four activities that between one body cell and another? K/U
your body must do to keep you alive. K/U 5. Do plant cells specialize in the same way as animal cells?
3. Choose two specialized cells mentioned in this section. Use examples of each to illustrate your answer. A
Compare their structure and function. K/U 6. Why do single-celled organisms not show
specialization? K/U

PERFORM AN ACTIVITY
2.10
Observing Specialized Cells SKILLS MENU
When you see your doctor for a routine examination, you are often Hypothesizing Observing
asked to visit the lab to provide a blood sample. This blood sample Planning Evaluating
is used to prepare a blood smear slide for examination. Slides are Controlling Variables Communicating
usually prepared with a stain that makes certain cells more visible
(Figure 1).
The technicians who examine cell samples are very skilled at
identifying cells that look different. Sometimes they count the
proportions of different types of cells or look for abnormal shapes
or clusters of cells. In this activity, you will have an opportunity
to examine a variety of specialized cells from both plants and
animals.
Figure 1 In this slide, the white blood cells are stained
dark purple to make them easier to see.
Purpose Analyze and Evaluate

To examine a variety of specialized plant and animal (a) How might the slide have been prepared to make
cells. the cells easier to see? T/I
(b) Think about each of the cell types that you

Equipment and Materials examined. Summarize their structural
• prepared slides of specialized cells (such as differences. T/I
epithelial cheek cells, skeletal muscle cells, lung

(c) For each cell type, infer how the structure of the
tissue cells, onion root tip, leaf cross section)
cells is related to their function and give reasons
• microscope
for your inference. T/I
• lens paper
SKILLS HANDBOOK Apply and Extend
Procedure 2.D., 3.B.6.
(d) Choose one of the cell types that you examined.
1. Select one of the prepared slides and carefully
Research a disease that results when these cells
clean it with lens paper. Using the correct method
stop working properly. Relate the disease to
for viewing a slide, examine the cells on the
the structure and function of the cell. Prepare
slide. Record their shape, their colour, and how
and present a brief report on your chosen
close together they are. Make a labelled scientific
disease. Your report could be oral, written, or
drawing of one or two cells.
electronic. T/I C A
2. Move the slide around to look for different types

of cells. Record your observations. GO TO NELSON SCIENCE
3. Repeat Steps 1 and 2 with the other slides. Keep

careful records and note differences between the
types of cells.

CHAPTER
LOOKING BACK
2
mitosis cytokinesis
cycle begins
cell
cell grows
e
int er phas

DNA replicates regarding division
All organisms are made up of Microscopes enable us to The cell cycle occurs in
one or more cells. examine cells in detail. distinct stages.
• The cell theory states that the cell • Plant and animal cells have most of • The cell cycle has three stages:
is the basic unit of life, that all the major cell structures in common. interphase, mitosis, and cytokinesis.
organisms are made up of one or (2.1, 2.2) (2.5)
more cells, and that all cells come • Materials for cell activity pass • Interphase is the stage when
from pre-existing cells. (2.1) through the cell membrane by cells grow, perform their specific
• Single-celled organisms, such diffusion and osmosis. (2.3) functions, produce more organelles,
as bacteria, consist of just one • Plant cells contain a cell wall, a large and replicate their DNA. (2.5)
cell. (2.1) central vacuole, and chloroplasts. • Mitosis is the division of the DNA in
• Every plant and animal, including (2.1, 2.2) a cell’s nucleus. (2.5)
humans, is a multicellular organism • Cells grow and divide to replace • Cytokinesis is the division of the
and is classified as a eukaryote. worn-out cells, to allow for growth in entire cell into two new identical
(2.1) organisms, to repair damaged cells, daughter cells. (2.5)
and to reproduce. (2.3)
Cell division is important Cancer cells generally divide Medical imaging

for growth, repair, and more rapidly than normal cells. technologies are important
reproduction. in diagnosing and treating
• Cancer is a broad group of diseases disease.
• Mitosis and cytokinesis together in which groups of cells grow and
make up the cell division portion divide uncontrollably. (2.7) • Screening sometimes involves
of the cell cycle. (2.5) • Uncontrolled cell growth and imaging technologies. (2.7)
• Mitosis results in each daughter division create a mass of cells • Medical imaging technologies
cell receiving an exact copy of the that may form a tumour. (2.7) include endoscopy, X-ray,
parent cell’s DNA. (2.5) • A benign tumour does not seriously ultrasound, CT scanning, and
• Cells go through four phases affect nearby cells and does not MRI. (2.7)
during mitosis: prophase, spread through the body. (2.7) • Imaging technologies are widely
metaphase, anaphase, and • A malignant tumour is made up used diagnostic tools that aid in
telophase (PMAT). (2.5) of cancer cells; it may invade and the detection of cancer and other
damage surrounding tissues. (2.7) diseases. (2.7)
• Cancer cells can metastasize to • Microscopic examination of cells is
other parts of the body. (2.7) the only way to confirm a diagnosis
• Prevention and screening minimize of cancer. (2.7)
the risk of cancer. (2.7)
Ontario Science 10SB

Unit A Tissues:
WH AT DO Y OU Vocabulary
THINK NOW? cell theory (p. 29)
prokaryote (p. 29)
You thought about the following statements at the beginning of eukaryote (p. 29)
the chapter. You may have encountered these ideas in school, organelle (p. 29)
at home, or in the world around you. Consider them again and DNA (deoxyribonucleic acid)
decide whether you agree or disagree with each one. (p. 30)
asexual reproduction (p. 36)
sexual reproduction (p. 36)
diffusion (p. 37)
concentration (p. 37)
osmosis (p.37)
cell cycle (p. 40)
interphase (p. 40)
mitosis (p. 40)
cytokinesis (p. 40)
daughter cell (p. 40)
1 New cells come from previously
existing cells.
4 Mitosis and the cell cycle are
identical processes. prophase (p. 41)
Agree/disagree? Agree/disagree? chromosome (p. 41)
chromatid (p. 41)
centromere (p.41)
metaphase (p. 41)
anaphase (p. 42)
telophase (p. 42)
cancer (p. 48)
tumour (p. 48)
benign tumour (p. 48)
plant cells are green.
5 Diffusion is the movement of particles
from an area of higher concentration
malignant tumour (p. 48)
metastasis (p. 48)
to an area of lower concentration. mutation (p. 49)
Agree/disagree? carcinogen (p. 49)
Pap test (p. 50)
biophotonics (p. 55)
specialized cell (p. 58)
BIG Ideas
✓ Plants and animals,
made of specialized
3 Plant and animal cells contain all the
same organelles.
radiation is harmful to humans.
cells, tissues, and organs
Agree/disagree? that are organized into
systems.
✓ Developments in medicine
How have your answers changed? and medical technology
What new understanding do you have? can have social and
ethical implications.
NEL Looking Back 63

CHAPTER
REVIEW
2
What Do You Remember? 10. What structures are responsible for the movement
of chromosomes during mitosis? (2.5) K/U
1. What are the three stages in the cell cycle?

(2.5) K/U 11. Explain the difference between a chromosome
and a chromatid. (2.5) K/U
2. During which stage of the cell cycle does the
replication of DNA take place? (2.5) K/U 12. (a) Explain why there is a maximum size for cells
to be able to function efficiently.
3. List and briefly describe the phases of mitosis.
(b) Very active cells, such as muscle cells, tend to
(2.5) K/U
be smaller than fat storage cells. Explain why

4. Look at Figure 1. (2.1–2.6) K/U
this is true. (2.3, 2.4, 2.9) K/U A
(a) Identify whether each of the cells shown

is an animal cell or a plant cell. Solve a Problem
(b) Which stage of the cell cycle (and, 13. Why are skin cells so susceptible to cancer?
if appropriate, which phase of mitosis) (2.7) T/A A
is represented in each diagram?

14. Identify one major part of a plant where cells
undergo frequent mitosis. (2.3, 2.6) K/U
15. List at least three “prevention and screening”

steps that you can take to reduce your risk of
premature death from cancer. (2.7) K/U A
(i) (ii) (iii) (iv) 16. Table 1 shows the number of cells in interphase,
Figure 1 each phase of mitosis, and cytokinesis for two
samples (Sample A and Sample B). For each
5. What are some features of cancer cells that make sample, the percentage of cells in a stage or phase
them dangerous? (2.7) K/U A
represents the length of time (as a percentage of
the cell cycle) that that stage or phase takes. For
What Do You Understand? example, if 50 % of the cells in a sample were in
6. You can often smell food cooking even though interphase, you would conclude that interphase
you may be several rooms away from the takes up 50 % of the time of a complete cell cycle.
kitchen. What process is responsible for the (2.5, 2.6) K/U T/I
odour spreading through the house? (2.3) K/U

(a) For each of the samples, calculate the
7. Briefly describe the differences between plant percentage of time spent by the cells in each
and animal cell division. (2.5) K/U stage or phase of the cell cycle.
(b) Draw a circle graph for each sample.
8. Explain in your own words why mitosis is
(c) How do the two samples differ?
important to eukaryotes. (2.2, 2.5) T/I
(d) Suggest a reason, based on what you learned

9. How would the cell cycle of a cancer cell be in this chapter, for the differences.
different from that of a normal cell? (2.7, 2.8) T/I
Table 1 Observations of Cells in Each Phase

Number of cells in this stage or phase
Interphase Prophase Metaphase Anaphase Telophase Cytokinesis
Sample A 320 10 3 2 1 1
Sample B 250 46 14 9 3 4

17. You notice that a mole on the back of your friend’s 23. Plants produce their own food from carbon
arm seems to be getting bigger. Your friend does dioxide and water by using the energy from
not think it is a big deal and is planning to sunlight in a process called photosynthesis.
ignore it. What would you advise? (2.7) K/U A
This process takes place in the chloroplasts.
(2.1) T/I C
Create and Evaluate (a) Research to find out which chemicals

give chloroplasts their green colour and
18. What does sunlight have in common with why these chemicals are necessary for
environmental chemicals that are believed to photosynthesis.
cause cancer? (2.7) K/U T/I A
(b) Present your findings as a poster or in some
19. Why is it important for women who may be other suitable format.
pregnant not to undergo X-rays? (2.7) K/U T/I A
24. Research and report on the health aspects of
20. Radiation is used in both X-rays and radiation using tanning salons. T/I C A
therapy for treating cancer. Yet it also causes 25. Plants sometimes develop growths or tumours
cancer. Explain how this is possible. (2.7) T/I A
called “galls.” Conduct research to find the causes
and effects of plant galls. Create an illustrated
Reflect On Your Learning presentation of your research. T/I C
21. In this chapter, you learned about the cell cycle, 26. Research how scientists are working to prevent
including the phases of mitosis. cancer. Pick a specific area of cancer research.
Prepare a report on your research findings in a
(a) Was mitosis particularly difficult for you to
format of your choice. T/I C
understand?
(b) If so, what strategies did you try to overcome 27. How would applying sunscreen help reduce your
this difficulty? risk of skin cancer? Conduct research to find
(c) If not, what helped you to understand this out how effective different sunscreens are for
concept? preventing skin cancer. T/I A
28. Find out from a local veterinarian what your

Web Connections options are if your pet develops cancer. T/I A
22. Since ancient times, people have searched for 29. Not all rapid cell growth is cancerous. A certain
the “fountain of youth” to slow down or stop the virus causes skin cells to divide quickly,
aging process. Modern-day anti-aging research producing a wart. Conduct research to find out
focuses on such areas as food, drugs, physical how and why a virus can cause warts. T/I C A
activity, and reduced calorie intake. T/I C A

30. With your teacher’s approval, select any topic
(a) Research a story related to the fountain of mentioned in this chapter. Research your topic
youth, such as the legend of Ponce de León. and prepare a report of your findings in an
(b) Select one area of modern research and appropriate format. T/I C
report on its potential as a method of

prolonging life.
(c) Write a story on the fountain of youth, using
your area of research as the main theme.
To do an online self-quiz or for all

other Nelson Web Connections,
NEL Chapter 2 Review 65

CHAPTER
SELF-QUIZ
2
For each question, select the best answer from the four Copy each of the following statements into your notebook. Fill
alternatives. in the blanks with a word or phrase that correctly completes
the sentence.
1. Chromosomes move toward opposite ends of the
cell during (2.5) K/U 8. In ________ reproduction, the offspring are
(a) prophase. exact genetic copies of the parent. (2.3) K/U
(b) metaphase. 9. Environmental factors, such as tobacco smoke,

(c) anaphase. X-rays, and UV rays, that cause cancer are
(d) telophase. ________. (2.7) K/U
2. The job of mitochondria is to supply cells with

Match each term on the left with the most appropriate
(2.1) K/U
description on the right.
(a) energy. 10. (a) diffusion (i) the amount of substance
(b) nutrients. (b) osmosis (solute) in a given volume
(c) oxygen. (c) concentration of solution
(d) protein. (d) cancer (ii) the disease resulting from
3. Plant cells and animal cells differ because plant (e) tumour uncontrolled cell division
cells have (2.1, 2.2) K/U (iii) the process by which
particles spread
(a) cell walls.
from areas of higher
(b) cell membranes.
concentration to areas of
(c) nuclear membranes.
lower concentration
(d) endoplasmic reticulum.
(iv) the movement of water
4. Prokaryotic cells differ from eukaryotic cells in from areas of higher
that prokaryotic cells do not contain (2.1) K/U water concentration
(a) cytoplasm. to areas of lower water
(b) DNA. concentration
(c) organelles. (v) a mass of cells that
(d) a nucleus. divides uncontrollably
without any function to
Indicate whether each of the statements is TRUE or FALSE. If the body (2.3, 2.7) K/U

Write a short answer to each of these questions.
5. Cells of benign tumours can break away from
11. The body cell of a horse has 60 chromosomes.
the original tumour and move to different parts
How many chromosomes will each new horse
of the body. (2.7) K/U
cell have after mitosis? (2.3, 2.5) K/U
6. Mitosis is the longest stage of the cell cycle.

12. How do chloroplasts in individual plant cells
(2.5) K/U
contribute to the overall function of a plant?
7. Biophotonics is a technology that uses beams of (2.1) K/U
light to detect and treat cancer. (2.7) K/U

13. Copy Table 1 into your notebook. In the second 19. Some antibiotics interfere with a bacterial cell’s
column, fill in information about the cell’s ability to copy DNA. (2.3, 2.5) A
function. In the third column, explain how the (a) How would this type of antibiotic be able to
cell’s structure suits its function. (2.9) K/U T/I
stop a bacterial infection?
Table 1 Function and Structure of Cells (b) These antibiotics do not have any effect on the
What How does the
DNA replication of human cells. Why is this
is the structure suit the important?
Type of Cell function? function?
20. Imagine you are writing an article for your school
red blood cell newspaper on cancer prevention. (2.7) C
nerve cell (a) Explain the causes of cancer that are most
fat cell relevant to people your age.
(b) Give three lifestyle choices students can make
sperm cell to decrease their odds of getting cancer.
epidermal cell of plant
root 21. Design an experiment to determine if temperature
photosynthetic cell has an effect on the rate of mitosis in plant cells.
Outline the procedure you will follow, including
the independent and dependent variables, and
14. The cell cycle varies among different types of cells. controls necessary. (2.3, 2.5) T/I
You are given samples of cells from a plant. Some

of the cells have a cell cycle that is 24 h in length. 22. The cells of human muscles and nerves rarely
Others have a cell cycle that is 72 h in length. divide after they are formed. How does this
(2.5, 2.6) T/I characteristic of muscle and nerve cells affect an
(a) Which set of cells would you predict came individual who has suffered from a spinal cord
from the root tip of the plant? Explain your injury? (2.9) A
answer. 23. A friend comes to you with a mysterious mole on

(b) Where might the other set of cells have come her arm. (2.7, 2.8) T/I C
from?
(a) What questions might you ask your friend
15. Is mitosis occurring in your body right now? about the mole?
Explain your answer. (2.3, 2.5) A (b) What characteristics would you look for that
would indicate whether she should see a
16. Draw a Venn diagram that illustrates the dermatologist?
similarities and differences between plant and
animal cells. (2.1, 2.2) C 24. (a) Define asexual reproduction and sexual
reproduction in your own words.
17. During prophase, the nuclear membrane
(b) Which method of reproduction produces a
dissolves. It reforms during telophase. Explain
population with more genetic variety? Explain
why this action is important for cell division.
your answer. (2.3) T/I
(2.5) T/I
18. You are interested in comparing the current rates

of various types of cancers with their rates of 50
years ago. (2.7) K/U T/I
(a) Where could you find information to

complete this research?
(b) Based on your knowledge of cancer and
cancer causes, what are some reasons that the
rates may have changed over the last 50 years?
NEL Chapter 2 Self-Quiz 67

CHAPTER
3 Animal Systems
KEY QUESTION: What are the structures and

functions of the various organ systems in animals?
The human body has many organ systems that interact,

resulting in an efficiently functioning organism.
68 Chapter 3 • Animal Systems NEL

UNIT B
Tissues, Organs,
and Systems of
Living Things

Division, and Cell
Specialization
KEY CONCEPTS
nasal cavity
mouth muscular skeletal
system system
Complex animals are Scientists use laboratory Each organ system has
made up of cells, tissues, techniques to explore the a specific function and
organs, and organ
trachea structures and functions corresponding specific
systems. within animals’ bodies. structures.
bronchi ciliated epithelial cells
lung
bronchioles
There are four main types Organ systems
alveoli interact Research is helping
of animal tissues. to keep the organism people overcome illness
functioning. and injury.
0SB Ontario Science 10SB
Unit A Tissues:
0SB
C03-F07A-UAOS9SB
Figure Number C03-F07B-UAOS10SB
Theresa Sakno
Company Theresa Sakno
Creative
0SB Ontario Science 10SB
Approved Pass
ENGAGE IN
SCIENCE
Thirty-year-old Claudia Castillo had a collapsed trachea

(windpipe) as a result of tuberculosis. This left her short of breath,
susceptible to infections, and unable to care for her children.
Medical research offered a solution.
In spring 2008, doctors in Barcelona, Spain, used a trachea
from a donor, who had died of a stroke, to help Claudia grow
trachea a new trachea. Doctors first stripped the living cells from the
donor’s trachea, leaving behind a supporting scaffold of non-living
cartilage. Stem cells from Claudia’s bone marrow were grafted over
this trachea scaffold. This created a hybrid trachea, made up of
Claudia’s own cells and the donor scaffold. Because there were no
living cells remaining in the donor scaffold, there was less chance
of it being rejected by Claudia’s body.
Since the transplantation, Claudia has not needed any
antirejection medications. She has returned to regular activities
with her children.
Are scientists able to produce entire organs in the laboratory
from patients’ own cells? Will stem cells eventually be used to
delay the aging process or perhaps to avoid death altogether? What
are your thoughts about these possibilities? Are these acceptable
goals for science?

WHAT DO YOU
THINK?
1 When blood is removed from the body, the remaining

blood cells divide to make more blood.
4 Our organs work independently of each other.
Agree/disagree?
Agree/disagree?
organs in the body are made up of living cells.
5 The organ systems of a frog are the same as the organ
systems of a human.
Agree/disagree?
animal cells look the same.
6 Animals can grow replacement body parts.
Agree/disagree?

FOCUS ON
WRITING
Writing to Describe and

WRITIng Tip Explain Observations
look for tips like this. They will help When you write to describe and explain observations, you note characteristics
you develop literacy strategies. you observe with your senses such as shape, texture, or behaviour, and
features you measure with instruments such as length, weight, or velocity.
Focus on writing your observations very clearly and accurately. The following
is an example of writing that describes and explains observations. Beside it
are the strategies used to write effectively.
Observations of Tissues in a Chicken Leg

Parts of Chicken: The leg of a chicken is made up of two parts: the upper leg (thigh)
and the lower leg (drumstick).
Mass: 227 g Use scientific units correctly.
Record measurements
(quantitative observations) Skin: The skin on the chicken leg was bumpy, rough, and thick. The bumps
accurately. were where the feathers used to grow.
Fat: There was fat under the skin. It felt soft and was white-yellow in colour.
There was more fat in the thigh than in the drumstick.
Use short sentences.
Muscles: The muscles, or meat, of the chicken leg were pinkish-red in colour.
The muscles were different shapes. A shiny transparent layer of epithelial
tissue covered the muscles.
Use scientific terminology
correctly. Tendons: They were white. They looked like tough ropes. They connected the
ends of the muscles to the bones.
Joints: There was a joint between upper and lower legs where the two bones met.
The joint was hinged, so it bent like a person’s knee.
Use precise wording.
Describe sensory (qualitative)
observations clearly by using
concrete words.
Ligaments and Cartilage: These tissues were shiny and white. Ligaments
hold bone to bone. Cartilage is very smooth. It covers the surface of the
bones at the joint.
Bone Marrow: In the centre of the bones is the soft, red, slimy marrow.
This is where blood cells are made.

The Hierarchy of Structure in Animals 3.1
Multicellular organisms, such as animals, are made up of many different
specialized types of cells. Each cell is specialized to perform a particular
function. The stinging cells of jellyfish help it capture its prey, whereas the
light-emitting cells of female fireflies can be used to attract a mate. Less
unusual cells, but still highly specialized, include muscle and bone cells, blood
cells, and sensory cells responsible for detecting sights, sounds, and odours.
Single-celled organisms, such as bacteria and blue-green algae, function
independently. They do not directly depend on any other cells. In contrast,
specialized animal cells cannot survive on their own. A single bone cell, hair
cell, or stomach cell would quickly die if separated from its surrounding
cells. These cells live and work as part of a much larger group of cells that
collectively make up the body of the animal. In fact, the body of a large
animal may be made up of trillions of individual cells. It is this entire
collection of cells working together as a whole organism that is capable of
survival and reproduction.
The complexity of animal bodies varies considerably. Some animals,
such as sponges, have a simple body structure. Slugs and snails are more
complex. Vertebrates (animals with backbones), such as birds, have highly
complex bodies (Figure 1).
(a) (b) (c)

Figure 1 A sponge (a), a sea slug (b), and a cardinal (c) show increasing levels of complexity.
To understand how specialized cells work together in complex organisms,

consider the many major tasks that must be performed by entire organisms,
such as feeding, breathing, moving, and reproducing. In this section, you will
examine how the animal body is organized for carrying out these functions.
The Animal Body—Levels of Organization

The bodies of animals look very different. A snail does not resemble
a penguin. Yet all animals are made up of cells that are organized in a
way that allows them to perform all of life’s functions. There are levels
of organization within each animal. These levels of organization form a
hierarchy, with the “most complex” at the top and the “least complex” at hierarchy an organizational structure,
the bottom. with more complex or important things
at the top and simpler or less important
You are already familiar with some of these levels of organization. In
things below it
earlier grades, you learned about some human organs and the digestive and
circulatory systems, and you may even have used the word “tissue.” These
terms all refer to the hierarchy of structure within the animal body. How
many levels are there? How are they arranged in terms of complexity?
NEL 3.1 The Hierarchy of Structure in Animals 73
Consider the hierarchy of organization within a specific animal: a white-
tailed deer. Let’s start with the simplest level of organization. Figure 2(a)
shows a single muscle cell in the deer’s heart. Each heart muscle cell is
branched, allowing it to connect to other heart muscle cells. Together, these
tissue a collection of similar cells that muscle cells make up the muscle tissue (Figure 2(b)). Figure 2(c) shows the
perform a particular, but limited, function heart itself, at the organ level of the hierarchy. An organ is made up of two
organ a structure composed of different or more types of tissues that work together to perform a complex function.
tissues working together to perform a In addition to muscle tissue, the heart includes two other types of tissue:
complex body function nerve tissue and connective tissue. An organ system consists of one or
organ system a system of one or more more organs and other structures that work together to perform a vital body
organs and structures that work together function. The heart, blood vessels, and blood are all parts of the circulatory
to perform a major vital body function
system (Figure 2(d)). The organism—in this case, the deer in Figure 2(e)—
such as digestion or reproduction
is made up of many different organ systems working together.
(a) Cellular level (b) Tissue level (c) Organ level (d) Organ system level (e) Organism level
heart muscle cell heart muscle tissue heart circulatory system deer
Figure 2 Levels of structural organization in an animal (a white-tailed deer)
The functioning of the whole organism depends on the hierarchy of

organization within the animal. The deer needs a circulatory system to
deliver nutrients and oxygen to its entire body. This system requires an organ,
such as the heart, to pump the blood. It also needs a network of arteries and
veins to distribute the blood throughout the body. In turn, the heart is itself
made up of muscle tissue, which contracts, and nerve tissue, which keeps
the heart beating regularly. The tissues are groups of specialized cells.
Living things are very complex. You might be wondering how many
different organs and organ systems there are. Does each organ system have
its own set of organs and associated tissues? How do these systems work
together?
Organ Systems
All animals accomplish the same basic functions regardless of their
appearance, behaviour, or where they live. They all obtain oxygen and
nutrients and eliminate wastes. They all sense and respond to their
environment, grow and repair damage, and reproduce. The task of organ
systems is to perform these basic functions. Some well-known human organ
systems are illustrated in Figure 3. You will learn about some of these in
more detail as you work through this chapter.

Figure 3 The human body has many
organ systems, some of which are
(a) (b) (c) shown here.
The musculoskeletal The respiratory system The nervous system

system supports the body takes oxygen from the sends messages around
and makes movement air and removes carbon the body.
possible. dioxide from the body. The digestive system WRITIng Tip
The reproductive system The circulatory system breaks down the food you
produces eggs (in females) transports substances eat and makes it available Spell Check
and sperm (in males). In around the body. to the body. Carefully check your spelling of
some animals, the female The urinary system scientific terms such as the names of
reproductive system also excretes waste and keeps tissues or organs. Since many of these
supports the growing fetus the correct amount of terms are not used often in everyday
until it is born. water in the body. speech or print, it is helpful to keep
your own list of unfamiliar terms such
as “musculoskeletal,” “epithelial,” and
“cytokinesis” so you can easily check
Organs their meaning and correct spelling.
Each organ system is made up of highly specialized organs and other
structures that work together to perform the overall function of the system.
For example, the digestive system is made up of many organs, including
the stomach, small and large intestines, liver, and pancreas. Most organs
work within a single organ system. For example, the stomach is part of the
digestive system and of no other system. Some organs, however, play a role epithelial tissue (or epithelium) a thin
sheet of tightly packed cells that covers
in more than one system. For example, the pancreas is part of the digestive
body surfaces and lines internal organs
system and the endocrine system. and body cavities
Tissues connective tissue a specialized tissue

that provides support and protection for
Animals have four major types of tissue: epithelial tissue, connective tissue, various parts of the body
muscle tissue, and nerve tissue. Each of these types of tissue contains many
muscle tissue a group of specialized
types of specialized cells, and each is found in most organ systems. Table 1, tissues containing proteins that can
on the next page, summarizes these four types of tissue. Where do these contract and enable the body to move
tissues come from? How does an animal produce these different cell and nerve tissue specialized tissue that
tissue types, which are then organized into organs and organ systems? You conducts electrical signals from one part
will begin to answer these questions in the next section. of the body to another
NEL 3.1 The Hierarchy of Structure in Animals 75

Table 1 Animal Tissue Types
Type Example Description Function
epithelial tissue • skin • thin sheets of tightly packed • protection from

cells covering surfaces and dehydration
• lining of the digestive system
lining internal organs
• low-friction surfaces
connective tissue • bone • various types of cells and • support

fibres held together by a
• tendons • insulation
liquid, a solid, or a gel, known
• blood as a matrix
muscle tissue • muscles that make bones • bundles of long cells called • movement
move muscle fibres that contain
specialized proteins capable
• muscles surrounding the
of shortening or contracting
digestive tract
• heart
nerve tissue • brain • long, thin cells with fine • sensory

branches at the ends
• nerves in sensory organs • communication within the
capable of conducting
body
electrical impulses
• coordination of body
functions
In SUMMARY
• Th e bodies of animals are organized in a • Tissues are groups of similar cell types that
structural hierarchy. perform a common function.
• Th
e levels of organization are organ systems, • Th
ere are four main tissue types: epithelial,
SB organs, tissues, and cells. connective, muscle, and nerve.
CHECK YOUR LEARnIng

1. Create a concept map to illustrate the hierarchy of 4. Make a list of the main functions that must be performed
organization within an animal. Include examples in your by all living things. For each main function, name an organ
concept map. K/U C system that is involved in performing that function. K/U
2. Give an example of an organ that is found in 5. Most animals have the same kinds of organ systems. Why
B do you think there are not dozens or even hundreds of
(a) only one organ system
completely different kinds of organ systems? T/I
(b) more than one organ system K/U
6. Why is there no hierarchy of organization within

3. In what way are organ systems more complex than highly
single-celled organisms? K/U
specialized cells? K/U
SB
Stem Cells and Cellular Differentiation 3.2
In previous studies, you learned that all multicellular organisms start as a
single cell. This single cell is sometimes called a zygote. A long process of
development is needed to transform the zygote into a fully formed plant or
animal. First, it goes through a series of divisions that generates many cells.
As the cells of this early-stage organism, known as an embryo, continue
to divide, the cells begin to show differences in their shapes, contents, and
functions. In other words, the cells become specialized.
The process that produces specialized cells is cellular differentiation. cellular differentiation the process
Cellular differentiation is directed by the genetic information inside the by which a cell becomes specialized to
perform a specific function
cell. This genetic information is encoded in the cell’s DNA. It is passed from
parent to offspring in the eggs and sperm cells.
Stem Cells
In animals, a cell that can differentiate into many different cell types is called a
stem cell. A stem cell divides into two daughter cells through the processes of stem cell an undifferentiated cell that
mitosis and cytokinesis (Section 2.5). Each resulting daughter cell can develop can divide to form specialized cells
into a different type of cell, based on which parts of its DNA are switched on
(Figure 1). Stem cells generally occur in clumps that differentiate into different
tissue layers, such as epithelial, muscle, and nerve tissues.
expression
of genes specific
to skin cells
skin cell
two daughter
cell
cells with the
division
same genes
stem cell
nerve cell
Figure 1 In this example, each
expression daughter cell differentiates into two
of genes specific different types of specialized cells:
to nerve cells a nerve cell and a skin cell.
There are two types of stem cells. Embryonic

C03-F08-UAOS10SB.ai
stem cells can differentiate into any kind of cell.
Tissue stem cells (sometimes called “adult stem
cells”) exist within specialized tissue. They are only
able to differentiate into certain types of cells. For
Illustrator
Joel and
example, tissue stem cells foundSharon Harrismarrow can
in bone
differentiate into white blood cells, red blood cells,
or platelets (Figure 2). This is why bone marrow
transplants are often a successful way to treat cancers Figure 2 This cross section of bone shows the spongy bone tissue.
that affect blood cells. The spaces are filled with bone marrow.
NEL 3.2 Stem Cells and Cellular Differentiation 77

RESEARCH THIS STEM CELL RESEARCH In CAnADA
SKILLS: Researching, Analyzing the Issue, Communicating, Evaluating SKILLS HANDBOOK
4.A., 4.C.
Many medical experts believe that stem cells can be used to treat 3. Research the ethical arguments for and against stem cell
a variety of injuries and illnesses. This field of medicine is called research.
“stem cell research.” Researchers are considering the use of stem
cells in the treatment of spinal cord injuries, Parkinson’s disease,
Alzheimer’s disease, diabetes, multiple sclerosis, and heart A. Summarize Canada’s current guidelines for stem cell
disease. There are many practical challenges in this line of work. research. T/I
Human stem cell research is also full of legal, ethical, and B. Write a short report on one possible application of stem cell
social concerns. Many nations have developed ethical and legal research. T/I C A
guidelines for research that involves human stem cells. C. Summarize the ethical arguments relating to this application
1. Investigate Canada’s current guidelines on stem cell research. of stem cell research. Present your position in an appropriate
format, supporting your opinion with reasons. T/I C A
2. Identify and research one possible future medical advance
that could result from stem cell research.
Cord Blood Cell Banking

The blood found in the umbilical cord immediately following birth is a
rich source of stem cells. These are not embryonic stem cells; they are more
similar to tissue stem cells. They can develop into any of the various kinds
of blood cells. Umbilical cord blood has a high concentration of these
tissue stem cells and is relatively easy to obtain (Figure 3). This collected
blood could be “banked” (stored) in case it is needed later in the child’s life.
Current uses for such cord blood stem cells include treatment for childhood
cancers such as leukemia.
DID YOU KNOW?

Canadians and Stem Cell Research
Research in the stem cell field grew
out of findings by Canadian scientists
Ernest A. McCulloch and James E. Till
in the 1960s.
Figure 3 Umbilical cord blood collection
Some commercial companies sell the service of cord blood banking. They
promote the idea that the child, or a sibling, may benefit from a future
treatment using these tissue stem cells. Many new parents are asked whether
they want to bank their new baby’s cord blood.

Tissue Stem Cell Transplantation
Both cord blood and bone marrow stem cells are relatively easy to isolate.
Both have been used to treat diseases such as leukemia. Leukemia is a
cancer that occurs in the bone marrow. The stem cells that differentiate
into blood cells divide too quickly, resulting in non-functioning blood cells.
In leukemia treatment, all of the diseased white blood cells must first be
removed and the bone marrow must be killed. Chemotherapy can target and
kill bone marrow cells and white blood cells. Healthy bone marrow cells (or
stem cells collected from the blood) are obtained from a carefully matched
donor. The healthy stem cells are then injected into the patient’s blood. In
a successful stem cell transplant, the donor blood stem cells grow in the
patient’s own bone marrow. Eventually, they produce healthy, cancer-free
blood cells.
Regeneration and Tissue Engineering

In complex animals, such as mammals, the term “regeneration” refers to the
ability of a tissue to repair itself. Skin, muscle, and bone can regrow and heal
after an injury. Not all cells regenerate, however. Nerve cells, for example, do
not naturally regenerate completely.
In animals such as salamanders, sea stars (starfish), and flatworms,
regeneration can sometimes replace lost limbs and even large portions of the
body (Figure 4). Scientists are researching ways to regenerate human body
Figure 4 Some species of starfish have
tissues and parts that do not normally regenerate. This field of research is an extraordinary ability to regenerate.
called tissue engineering. This is useful in treating spinal cord injuries and A single severed “arm” can grow into a
in different types of tissue grafting, which involves providing replacement whole new starfish.
tissues for patients. Tissue engineering could also provide a source of To find out more about advances
biological models for testing drugs and other potentially dangerous in tissue engineering,
substances. GO TO NELSON SCIENCE
In SUMMARY
• Cellular diff erentiation is the process by which a • Stem cell research is discovering medical
less specialized cell becomes a more specialized treatments for injuries and diseases.
cell type. • Regeneration results in the repair or replacement
• Th
e two types of stem cells are embryonic stem of tissues or body parts.
cells and tissue stem cells.
CHECK YOUR LEARnIng

1. What is the meaning of the term “cellular 4. What is the significance of being able to harvest stem
differentiation”? K/U cells that can specialize into any type of cell? K/U
2. What is the difference between tissue stem cells and 5. Briefly describe the process of a bone marrow transplant
embryonic stem cells? K/U to treat leukemia. K/U
3. Why are stem cells from a newborn baby’s umbilical cord 6. How is regeneration beneficial to an animal? K/U
blood considered to be tissue stem cells? K/U 7. Can all animals regenerate? Explain. K/U
NEL 3.2 Stem Cells and Cellular Differentiation 79

3.3 The Digestive System
Your body needs food to survive. Each of your cells needs a supply of food
digestive system the organ system that (to provide chemical energy) and other nutrients. How do the necessary
is made up of the mouth, esophagus,
chemicals make their way from your mouth to your cells? The first part of
stomach, intestines, liver, pancreas, and
gall bladder; the system that takes in, the journey is through the digestive system. The second part is through the
breaks up, and digests food and then circulatory system, which you will learn about in Section 3.4.
excretes the waste The digestive system is the organ system that takes in food, digests it,
and excretes the remaining waste. The digestive system is made up of the
anus digestive tract and the accessory organs.
The Digestive Tract

The digestive tract in most animals is essentially one long tube with two
openings, one at either end. This structure is very apparent in an earthworm,
intestine where the tube varies only slightly in diameter along its length (Figure 1(a)).
In humans, the digestive tract is much more complex.
It includes the mouth, esophagus, stomach, small
intestine, large intestine, and anus. The accessory
esophagus mouth
organs include the liver, gall bladder, and pancreas
(Figure 1(b)).
Figure 1 (a) In an earthworm, food passes through the esophagus

and is stored in the crop. The gizzard grinds the food to break it into
pieces. Nutrients are absorbed in the intestine. (b) In a human, the
breakdown of food starts in the mouth and continues until nutrient
(a) gizzard crop pharynx absorption occurs in the small intestine.
The entire length of the digestive tract is lined

with epithelial tissue. This tissue is made up of many
different types of cells, including goblet cells that
mouth
secrete mucus. The mucus serves two functions: it
esophagus
protects the digestive tube from digestive enzymes,
and it allows the material to pass smoothly along the
liver tube. The digestive tube also includes layers of muscle
tissues and nerves (Figure 2).
stomach
gallbladder epithelial tissue

with goblet cells
pancreas
connective tissue
large intestine (colon) muscle
connective tissue
small intestine
epithelial tissue
rectum
anus villi
(b) Figure 2 Tissues that make up the digestive tract

C03-F10-UAOS10SB.ai
If you eat spoiled food, your body recognizes the presence of toxins
produced by bacteria. Your digestive tract responds by attempting to remove
the toxins rapidly, which you experience as vomiting or diarrhea. This can
also happen as a result of too much alcohol or other poisonous substances.
The Mouth
The mouth starts the process of breaking down food. It does this in two
ways: mechanically (with the teeth and tongue) and chemically (with
chemicals called enzymes that break apart the molecules of food). The
mouth adds saliva—a mixture of water and enzymes—to the food in the
mouth. Saliva is produced by cells in the epithelial tissue that lines the
mouth. Once the food is broken up and softened with saliva, it is swallowed
and passed into the esophagus.
The Esophagus DID YOU KNOW?
The esophagus is a muscular tube connecting your mouth to your stomach. Heartburn Is a Real Pain
The muscles are a special type, called smooth muscle tissue, which can Sometimes if you eat too quickly or
if you are under a lot of stress, acidic
contract and relax without conscious thought. This movement is controlled fluid from your stomach backs up
by nerve tissue. The contractions slowly move the food along. into your esophagus. Your stomach
has a thick protective mucous layer
The Stomach that protects it from your digestive
One of the major organs in the animal digestive system is the stomach acids. Your esophagus does not have
(Figure 3). The main function of the stomach is to hold food and churn it the same protective layer to provide
a barrier from the acid. This results
to continue the process of digestion. The stomach lining contains cells that
in a burning sensation known as
produce digestive enzymes and acids. Smooth muscle tissue contracts to “heartburn.” Heartburn treatment may
mix the stomach contents. include taking an antacid to neutralize
The stomach is richly supplied and lessen the effects of the acid.
with nerves that signal when we
have had enough to eat.
epithelial tissue
enzyme-producing cells
muscle
connective tissue and
epithelial tissue
Figure 3 The stomach consists of many

types of specialized tissues grouped
together to function as an organ.
The Intestine
In mammals, the part of the digestive tract between the stomach and the
anus is the intestine. The lining of the intestine has cells that produce mucus.
It also has many fine blood vessels interlaced through the other tissues. Like
C03-F11-UAOS10SB.ai
the esophagus and stomach, the intestines contain smooth muscles that
contract and relax without our conscious thought.
NEL 3.3 The Digestive System 81
Illustrator
DID YOU KNOW? There are two parts to the intestine: the small intestine and the large
Expanding Mucus! intestine. The small intestine, which is about 6 m long and relatively narrow,
The mucus in the goblet cells is is where most digestion occurs. Goblet cells release mucus, and nutrients
condensed but expands rapidly when diffuse through the wall of the small intestine and enter the bloodstream.
released from the cells. Like shaving
The large intestine, or colon, is about 1.5 m long but larger in diameter
cream released from a pressurized
can, the mucous gel increases in than the small intestine. Its lining absorbs water from the indigestible food.
volume up to 500 times in only 20 ms! The remaining solid matter is excreted as feces from the anus.
Sometimes the epithelial tissue lining the colon can become inflamed and
stop working properly. This disease is known as colitis. There are several
causes of colitis, including viruses, bacteria, narrowed blood vessels, and
failure of the body’s disease-fighting mechanism. Colitis is diagnosed with
the aid of an endoscope and microscopic examination of tissue samples
taken from the colon.
Accessory Organs
The liver, pancreas, and gall bladder all help with the digestion of food by
supplying digestive enzymes. The liver also produces a fluid called bile, which
helps in the breakdown of fats in our food. These substances are delivered
into the digestive tract, where they mix with the partially digested food.
The pancreas produces an important enzyme called insulin. Insulin
regulates the concentration of glucose (a sugar) in the blood. Diabetes is
a disease in which the pancreas produces too much or too little insulin. A
person with diabetes can experience weakness and dizziness due to too low
or too high blood glucose levels. Some forms of diabetes can be controlled
by diet.
UNIT TASK Bookmark
Consider this information about the digestive system as you work on the Unit Task
on page 156.
In SUMMARY
• Th
e digestive system takes in food, digests it, • Th e digestive tract includes epithelial tissue,
absorbs nutrients and water, and excretes waste. smooth muscle tissue, nerves, and connective
• Th e digestive system is made up of the digestive tissue. The smooth muscle tissue can contract
tract and accessory organs. and relax without conscious thought.
• Th e digestive tract in most animals contains one • Th
e accessory organs are the liver, the pancreas,
long tube with two openings, one at either end. and the gall bladder. They produce enzymes and
other fluids that aid digestion.
• Th e digestive tract in humans includes the
mouth, esophagus, stomach, large intestine, small
intestine, and anus.
CHECK YOUR LEARnIng

1. List the main parts of the digestive tract and their major 4. Which kind of tissue contracts to push food through the
functions. K/U digestive system? K/U
2. Why is it necessary for food to be digested? K/U
5. Briefly describe at least one disease or illness that can
3. Name at least four substances that are added to the food result from a problem in the digestive system. K/U
in the digestive tract to aid in digestion. K/U
The Circulatory System 3.4
The human circulatory system is made up of the blood, the heart, and
the blood vessels. The function of the circulatory system is to transport circulatory system the organ system that
is made up of the heart, the blood, and the
substances around the body. It moves nutrients absorbed from the intestine blood vessels; the system that transports
to all of the body’s cells. Blood flows through the lungs (part of the oxygen and nutrients throughout the body
respiratory system) to pick up oxygen and then flows through the body and carries away wastes
to deliver it to active cells. Blood also carries wastes from the body tissues
for disposal. It carries carbon dioxide to the lungs, where it is released into To watch a dissection of the organ
the air. Other waste substances are carried to the kidneys (an organ of the systems of a fish,
urinary system), where the substances are filtered out and excreted. GO TO NELSON SCIENCE
Among the circulatory system’s other vital functions are the regulation of
body temperature and the transport of disease-fighting white blood cells to
areas of the body where there are viruses or bacteria.
carbon
Parts of the Circulatory System dioxide out oxygen in
The three main parts of the circulatory system are the blood, the
heart, and the blood vessels. The heart pumps the blood through capillaries in lungs, where
large blood vessels, called arteries, which branch into smaller gas exchange takes place
and smaller blood vessels. The smallest blood vessels are called
arteries
capillaries. In the capillaries, blood exchanges many substances
with the surrounding tissues (Figure 1). After this exchange, blood
flows into larger blood vessels called veins and eventually returns to
the heart. Let’s now look at these parts in detail.
Blood veins
Blood is a type of connective tissue that circulates throughout all

parts of your body. The blood consists of four components (Figure 2):
• Red blood cells are the most plentiful of the body’s blood
cells. These cells make up almost half of the blood’s volume.
Red blood cells contain a protein called hemoglobin, which
allows them to transport oxygen throughout the body. heart
Hemoglobin makes the cells appear red.
• White blood cells are infection-fi ghting cells in the blood.
They recognize and destroy invading bacteria and viruses.
White blood cells make up less than 1 % of the volume carbon
oxygen out
of blood. They are the only blood cells to have a nucleus. dioxide in
• Platelets are tiny cells that help in blood clotting. Th
ey also capillaries in body tissues,
where gas exchange takes place
comprise less than 1 % of the blood.
• Plasma is a protein-rich liquid that carries the blood cells along. Figure 1 The circulatory system
connects all parts of the body. In this
It makes up over half of blood’s volume. diagram, the oxygenated blood is shown
C03-F12-UAOS10SB.ai
in red. The deoxygenated blood is
shown in blue. Note that this diagram is
not to scale.
Illustrator
Joel and Sharon Harris
Figure 2 Blood cells

UAOS10SB
NEL 0-17-635528-6 3.4 The Circulatory System 83
The Heart
DID YOU KNOW? The heart is made up of three different types of tissue: cardiac muscle tissue,
Artificial Heart nerve tissue, and connective tissue. Cardiac muscle tissue is a special type of
Dr. Tofy Mussivand, of the Medical muscle found only in the heart (Figure 3). All of the cardiac muscle tissue
Devices Centre at the University of in each part of the heart contracts at the same time. This makes the heart
Ottawa Heart Institute, researches
contract and moves the blood around the body.
and designs artificial hearts. A patient
needing a heart transplant may receive Your heart pumps with a regular beat. The frequency of the beat (the
an artificial heart until a donor heart heart rate) changes depending on your physical activity and other factors,
becomes available. such as stress, temperature, and your general health.
The muscles and nerves are covered by a smooth layer of epithelial tissues.
This covering reduces friction and protects the heart from damage when the
lungs expand and contract. The inner surface of the heart, where the blood
flows, is also lined with smooth epithelial tissue to allow the blood to flow freely.
Any hardening or roughening of this inner lining can lead to health problems.
Blood Vessels
Three types of blood vessels form a network of tubes throughout the body to
transport the blood. These three types of blood vessels are arteries, veins, and
capillaries. Arteries carry blood away from the heart. Because the blood in
artery a thick-walled blood vessel that the arteries is being pumped away from the heart, it is under greater pressure
carries blood away from the heart than the blood in other blood vessels. The walls of arteries are thicker than
vein a blood vessel that returns blood to
the walls of other blood vessels to withstand this pressure. Veins carry blood
the heart toward the heart. This blood is at lower pressure, so the walls of the veins are
not as thick. Both arteries and veins can vary considerably in size. The largest
are nearest the heart, where just a few blood vessels carry large volumes of
blood. Further from the heart, the blood vessels are much smaller, and there
are more of them, like twigs on a tree. Arteries and veins are linked together
capillary a tiny, thin-walled blood vessel by the capillaries (Figure 4). Capillaries are tiny blood vessels with very thin
that enables the exchange of gases, walls that allow substances to diffuse between the blood and other body fluids
nutrients, and wastes between the blood
and tissues. Oxygen and nutrients diffuse from the blood into the surrounding
and the body tissues
tissues. Carbon dioxide and other wastes pass from the body tissues into the
blood to be carried away for disposal. Every part of the body is supplied with
blood by a network of capillaries.
Figure 3 In this photo of healthy cardiac tissue, the fibres of cardiac Figure 4 Capillaries can be so narrow that red blood cells can only
muscle are stained pink. Their nuclei are purple. pass through one at a time.

T RY THIS EXAMInIng BLOOD VESSELS
SKILLS: Performing, Observing, Communicating SKILLS HANDBOOK
2.D., 3.B.6.
Arteries, veins, and capillaries are all blood vessels, but they 1. Use your microscope to examine the slide showing an artery.
have very different functions. In this activity, you will look at their Draw a diagram to illustrate what you see.
structures and see how the structure is related to the function. 2. Repeat Step 1 with the other two slides.
Equipment and Materials: microscope; lens paper; prepared A. How are the different functions of the three blood vessels
slides of cross-sections through arteries, veins, and capillaries reflected in their structures? T/I
Diseases and Disorders of the WRITIng Tip
Circulatory System Describing Observations

Use a thesaurus to find words
There are many conditions that affect the function of the circulatory system. that describe your observations as
There are over a dozen types of heart disease alone that can affect people specifically and accurately as possible.
of all ages and all levels of fitness. The most common heart problems is Use words that help readers visualize
your observations clearly. By using
coronary artery disease, which can lead to heart attack.
concrete nouns, adjectives, verbs, and
adverbs, your description will give
Coronary Artery Disease readers a clear picture of what you saw.
Your heart is a hard-working organ, and the cardiac muscle tissue needs
a steady supply of oxygen and nutrients. Coronary arteries are the blood GO TO NELSON SCIENCE
vessels that provide blood to the heart muscle tissue itself. These arteries can
become partially blocked with plaque—a deposit made of fat, cholesterol,
calcium, and other substances that normally circulate in the blood. This
plaque buildup can be caused by inherited genetic information or by poor
lifestyle choices, such as a high-fat diet, smoking, and lack of exercise.
Symptoms of coronary artery disease include tiredness, dizziness, and
pain or a burning sensation in the chest or arms. The problem can be
diagnosed with the aid of a special X-ray called an angiogram, in which a
fluorescent dye is injected into the bloodstream. This dye shows up on the
X-ray image (Figure 5).
Figure 5 During an angiogram, a

fluorescent dye is injected into the
artery and X-ray scans are taken. This
X-ray image has been colourized by a
computer. A white rectangle highlights
the blockage in the artery in a patient’s
heart.
NEL 3.4 The Circulatory System 85

DID YOU KNOW? Heart Attack
Blood Clotting Coronary arteries can become completely blocked, either with plaque or
It is important that blood forms clots with a blood clot. When this happens, the heart muscle cells no longer
when the blood vessels are damaged
by a cut or scrape. Some people
receive the oxygen and nutrients they need to function. The heart stops
have disorders that cause the blood pumping, and the heart tissue starts to die.
to clot too easily, causing blockages, General symptoms of a possible heart attack include
or not quickly enough, so they bleed
• chest pain or pressure
uncontrollably. Both problems can be
life-threatening. • shortness of breath
• nausea
• anxiety
• upper body pain
• abdominal or stomach pain
• sweating
• dizziness
• unusual fatigue
The actual symptoms of a heart attack can vary widely between men
and women and from person to person, but any suspicion of a heart attack
requires immediate medical attention. A heart attack can be diagnosed
with a blood test and an electrocardiogram. The blood test identifies
certain proteins that are present only when cardiac muscle tissue dies. The
electrocardiogram (ECG) a diagnostic electrocardiogram (or ECG) measures the electrical signals created by the
test that measures the electrical activity heart as it beats (Figure 6). The electrical signals from damaged heart muscle
pattern of the heart through its beat cycle
tissue are not the same as those from healthy heart muscle.
Figure 6 A patient having an

electrocardiogram. The blue and white
circles are electrodes placed on the
skin. These electrodes detect electrical (a)
signals.
(b)

RESEARCH THIS PROBLEMS In THE CIRCULATORY SYSTEM
SKILLS: Researching, Analyzing the Issue, Communicating SKILLS HANDBOOK
4.A., 4.B.
The circulatory system is vitally important to our health.
Blockages and other problems can occur in blood vessels in
many parts of the body. A. Think about how life would change for someone who
1. Chose one specific disease or disorder of the circulatory discovers that he or she has this problem. Write a list of
system to research, such as coronary artery disease, heart probable life changes. T/I A
attack, stroke, deep vein thrombosis, or anemia. B. Summarize your findings in an illustrated presentation or
2. Research your chosen disease. Find out the causes, as a short dramatic performance. T/I C
symptoms, diagnostic technologies, treatment, and long-term C. As a class, discuss whether there are any drawbacks to the
effects. If you have time, you could also look at the social and use of medical technologies. How expensive are they? Are
economic impacts of your chosen disease. they readily available to everybody? C A
UNIT TASK Bookmark

How could you use information about the symptoms of heart disease as you work on the
Unit Task on page 156?
In SUMMARY
• Th
e circulatory system is an organ system made • Heart disease is a group of conditions that aff ect
up of the blood, the heart, and the blood vessels. the function of the heart.
• Th
e function of the circulatory system is to move • Angiograms and electrocardiograms are two
nutrients and gases to all of the cells of the body medical technologies that are used to help
and to carry away wastes through the bloodstream. diagnose abnormalities in the circulatory system.
CHECK YOUR LEARnIng

1. Describe the function of the circulatory system. K/U
2. Name at least four substances that are carried by the
circulatory system. K/U
3. Explain how the circulatory system interacts with the
digestive system. K/U
4. How does an angiogram differ from a regular X-ray (a)
scan? K/U
5. Figure 7 shows cross-sections of three different blood
vessels. Name each one and describe how its structure
matches its function. K/U
6. Create a table that lists the main parts of the circulatory
system and the tissue types in each part. K/U C
7. (a) Create a pie chart to illustrate the volumes of the (b)
various components of blood.
(b) What challenges did you face when creating your
chart? K/U C
8. How is cardiac muscle different from the smooth muscle
that surrounds the digestive tract? K/U
9. Name and briefly describe two diseases or disorders
(c)
of the circulatory system. K/U Figure 7
NEL 3.4 The Circulatory System 87
Studying the Organ Systems of a Frog SKILLS MENU

The organs and organ systems of a frog are similar to those of Hypothesizing Observing
a human. Each organ in the frog has a specific function and plays a vital Planning Evaluating
role as part of an organ system. Controlling Variables Communicating
In this activity, you will work in a group to study the functions and
organization of one of the following systems of the frog: digestive,
circulatory, respiratory, nervous, reproductive. At the end of the activity,
you and your classmates will come together to share your findings and
discuss interrelationships between the systems studied. You will be using
electronic resources for your research, including, when available, videos
of dissections and computer-simulated dissection programs.
You will also have a chance to consider whether it is better to
perform dissections on real animals, or to use simulations and
photographs of dissections.
SKILLS HANDBOOK
Purpose Procedure 3.B., 4.
To investigate the primary function and organization 1. Research the organ system of the frog that
of organ systems in a particular animal system and to you have been assigned to study. Write a brief
explore interrelationships between organ systems in paragraph describing the overall purpose and
an organism. function of this system in the organism. Be sure
to discuss how this system allows the frog to
Equipment and Materials survive in its environment.
• online access to electronic images 2. Many photographs and diagrams of the frog
organ system are available in print and on
GO TO NELSON SCIENCE the Internet (Figures 1 and 2). Using various
resources, draw a diagram of the organ system,
labelling all organs and showing the connections
between the organs. Be sure to include any
external features that are part of the system.
(a) (b)
Figure 1 External features of a frog

(a) (b)
Figure 2 Internal features of a frog
3. Create a table similar to Table 1. Write a title 6. Within your group, discuss the contents of
that includes the name of your system. Complete column 4 of your table.
the columns as you carry out your research. 7. If you have time, research the interrelationships
Locate and name each organ or structure in between systems.
the first column. In column 2, summarize the
8. As a class, discuss the interrelationships between
functions of the individual organs. In column 3,
the systems studied by each of the groups.
list any interactions between organs and
structures within that system. In column 4, write
predictions of the interrelationships between Analyze and Evaluate
your system and other systems. Your predictions (a) What is the role of the system you studied in the
can take the form of statements such as “The survival of the frog?T/I
respiratory system brings oxygen into the body, (b) Did you learn about any organs that are unique
and the circulatory system transports the oxygen to the frog? If so, what were they called and what
to the cells.” was their function for the frog? T/I
Table 1 Organs of the _________ System of the Frog (c) Describe the interrelationship between the
Interactions systems. T/I
with other Interrelationships

Organ or
structure Function(s)
organs in
the system
with other organ
systems
Apply and Extend
(d) Discuss as a class why you did not dissect a real
frog in this activity. Research what alternatives
are available. Debate the value of using preserved
real specimens compared to alternatives such as
4. As a group, prepare and deliver a short virtual dissection programs. C A
presentation to the class that describes your

frog organ system. Assign different roles to
diff erent group members. Read the paragraph (e) Create a t-chart comparing the organ systems of
that you wrote in Step 1. Explain your diagram a frog with those of a human. T/I C
from Step 2, pointing out all organs and their

functions. Emphasize the interaction of the
organs within the system you studied.
5. While listening to the presentations of classmates,
note any possible interrelationships between
the function of their system and the function of
yours. Add these to column 4 of your table.
SCI ENCE OSSLT
West Nile Virus

In 1999, hundreds of people in New York City became ill with
an illness that was new to North America. Medical researchers
discovered that the cause was West Nile Virus (WNV).
WNV is mainly spread by mosquitoes (Figure 1). When an
infected mosquito feeds on a bird’s blood, the virus passes into
the bird. Another mosquito then bites the same bird and the virus
is transferred again. The virus also infects mammals, including
horses and humans. One in five people with the virus become ill.
In rare cases the illness causes death. WNV has now spread to
Ontario and other provinces.
Figure 2 Chemicals that kill mosquito larvae are put in ponds and
drainage water.
How has WNV affected us? People are more cautious

about being outdoors and are using insect repellent more often
(Figure 3). We do not yet know whether there are any long-term
health effects of increased insect repellent use. There is also the
possibility of mosquitoes becoming resistant to the chemicals.
Figure 1 West Nile Virus is transferred to birds and humans by

infected mosquitoes.
The Ontario government acted swiftly to implement control

procedures. A Public Health Officer in each region is responsible
for testing mosquitoes and birds determine the incidence of
Figure 3 Ontarians are urged to protect themselves from West Nile
WNV in the area. These officers must decide if pesticides are
Virus when out of doors by using insect repellent.
needed to control the mosquito population. The Ministry of the
Monitoring and controlling WNV requires cooperation among
Environment recommends pesticides and manages their use.
a number of different professions. In addition to the Public Health
Local governments are responsible for applying the pesticides.
Officers who make decisions about mosquito control, licensed
Currently, tablets with a fast-acting pesticide that kills mosquito
applicators are required to apply the pesticides properly. Lab
larvae are put in drainage waters during spring months in many
technicians test the birds and mosquitoes that are collected.
Ontario cities (Figure 2).
The medical community is on alert for WNV symptoms. Public
educators communicate ways to reduce the risk of WNV. They
suggest cleaning up yards where mosquitoes might breed and
protecting against mosquito bites. In the words of the Ontario
Government, we must all “fight the bite.”
90 NEL
The Respiratory System 3.6
Whether you are aware of it or not, you breathe in and out 15 times each minute
on average. This rate increases automatically if your physical activity increases.
respiratory system the organ system
With normal breathing, the average person moves more than 10 000 L of air in that is made up of the nose, mouth,
and out of the lungs each day. trachea, bronchi, and lungs; the system
The respiratory system is responsible for providing the oxygen needed by that provides oxygen for the body and
the body and for removing the carbon dioxide produced as your body uses allows carbon dioxide to leave the body
energy for growth, repair, and movement. The respiratory system works in
close collaboration with the circulatory system (Figure 1). As you learned in lungs
Section 3.4, the circulatory system moves substances to all parts of the body. (air containing oxygen,
carbon dioxide,
Structural Features and other gases)
The respiratory system consists of the lungs and the other organs that
O2 CO2
connect the lungs to the outside (Figure 2(a)). Air enters through the mouth
and the nose, passes through the pharynx (throat), and travels down the
trachea (commonly known as the windpipe). The trachea separates into two circulatory
branches called bronchi (singular: bronchus). system
Some of the epithelial cells that line the trachea and bronchi produce
mucus, similar to those in the digestive system. Many of the epithelial cells
have cilia (hairlike projections). Cillia help move mucus and filter out any O2 CO2
foreign material that might enter the system (Figure 2(b)). The bronchi
deliver air into the lungs. tissues
(cells requiring oxygen
and producing
carbon dioxide)
Figure 1 The respiratory system relies

on the circulatory system to distribute
oxygen to the cells and to remove
nasal cavity carbon dioxide.
mouth (b)
trachea
DID YOU KNOW?
Keeping Food Out
bronchi ciliated epithelial cells Your mouth can contain both food and
air. How does your body manage to
send food to your stomach and air to
lung
your lungs? When you swallow food,
a flap of tissue called the epiglottis
covers the opening to the trachea. This
prevents the food from going down the
wrong tube. Occasionally, some food
or liquid does sneak into the trachea.
(a) bronchioles The resulting bout of coughing is your
alveoli body’s attempt to get it out of the
trachea and into its rightful place.
Figure 2 (a) The human respiratory system (b) Epithelial cells with cilia
NEL 3.6 The Respiratory System 91

The trachea is supported by rings of cartilage. This keeps the trachea open
To find out how the respiratory
and allows the air to flow freely. Cartilage is a special type of connective tissue
system also enables speech, consisting of specialized cells embedded in a matrix of strong but flexible
GO TO NELSON SCIENCE fibres. This matrix was formed by cells but is not actually living material.
Gas Exchange
The main purpose of the respiratory system is gas exchange. Oxygen enters
the bloodstream in the lungs by diffusion. Carbon dioxide leaves the blood
in the same way. The respiratory system is adapted in several ways to make
these processes as efficient as possible.
Each of the bronchi branch again and again, ending in tiny air sacs
alveolus (plural: alveoli) tiny sac of air in called alveoli (singular: alveolus) (Figure 3(a)). The alveoli have very thin
the lungs that is surrounded by a network walls. Each alveolus is surrounded by a network of capillaries. Oxygen and
of capillaries; where gas exchange takes
carbon dioxide have only to diffuse through two thin walls: the walls of the
place between air and blood
capillaries and the walls of the alveoli (Figure 3(b)).
carbon
dioxide
alveoli
oxygen
single
alveolus
Figure 3 (a) Each alveolus is surrounded
by a capillary network to ensure a good
blood supply. (b) The alveoli provide a
huge surface area in the lungs across capillary red
which oxygen and carbon dioxide can network blood
(a) (b) capillary cells
diffuse.
LEARnIng Tip The circulatory system provides a good blood supply to the lungs. This
Diffusion
helps make the respiratory system very efficient. The concentration of
Substances always diffuse from where oxygen in the blood that flows through the lungs is always less than the
they are in high concentration to where concentration of oxygen in the air in the alveoli. This means that oxygen
they are in low concentration. always diffuses into the blood. As the blood picks up oxygen, it is quickly
carried away to other parts of the body, where the oxygen diffuses out of the
blood and into the cells. At the same time, excess carbon dioxide diffuses
from the cells into the blood. It is then carried by the blood to the lungs,
where it diffuses out into the air in the alveoli and is expelled to the outside.
Breathing
The respiratory system includes a method of moving air into and out of the
lungs. Th
Ontario is process,
Science 10SBwhich we call breathing, involves alternately drawing
ario Science 10SB air into the lungs (inhalation) and then pushing air out (exhalation). This
Unit A Tissues:
process involves muscles that move the ribs, making the rib cage expand
A Tissues: and contract.
Figure Number Breathing also involves the diaphragm, a large sheet of muscle
C03-F15B-UAOS9SB
re Number To see how the volume of the
C03-F15A-UAOS9SB underneath
Company
the lungs. Together,
Theresa Sakno
the diaphragm and the muscles between the
lungs increases and decreases ribs increase or decrease the volume of the lungs (Figure 4). As the volume
pany as Theresa
the diaphragm contracts and
Sakno Creative
relaxes, of the lungs changes, the pressure inside them also changes. In this way,
ative GO TO NELSON SCIENCE fresh air flows into and out of the alveoli.
Pass
s Approved Approved
oved 92 Chapter
Approved3 • Animal Systems Not approved NEL
exhalation inhalation DID YOU KNOW?
volume decreases volume increases
Hiccups!
The condition commonly known as
hiccups is caused by the muscles of
the diaphragm suddenly contracting.
When the diaphragm quickly contracts,
air rushes into the mouth and pharynx,
rib trachea
cage lungs causing the epiglottis to snap shut
over the end of the trachea. This
produces the “hic” sound. Numerous
events can trigger hiccups, from eating
too fast to coughing. Hiccups normally
stop without intervention and rarely
become a medical problem.
muscles relax, muscles contract,

diaphragm is dome-shaped diaphragm flattens
Figure 4 Inhalation involves drawing air into the lungs; exhalation involves pushing the air out.
CONTROL OF BREATHING C03-F31-UAOS10SB.ai
The control over our breathing is involuntary; we do not generally have to

think about breathing. We can override the involuntary system and stop
breathing or control it while we Illustrator
talk, but this control is only temporary.
The involuntary system soon takes Joelover
and again
Sharonafter a short period of time.
Harris
Try it and see: how long can you hold your breath?
Breathing is controlled by a part of the brain that detects the
concentration of carbon dioxide in the blood. As the level of carbon dioxide gills
increases, the brain sends signals to the diaphragm, the muscles between operculum
the ribs, and the heart. The breathing rate increases, and the heart beats
faster. This has the double effect of decreasing the concentration of
carbon dioxide in the blood and increasing the available oxygen.
UAOS10SB
0-17-635528-6 The Respiratory System in
Other Animals
Figure Number The roleC03-F31-UAOS10SB.ai
of the respiratory system is to make oxygen available
Company to all ofNesbitt
the cells of the body and to get rid of waste carbon dioxide.
Graphics
Creative In comparison to mammals, many other organisms have simple
Pass respiratory systems. Regardless of how simple or complex, all respiratory
3rd Pass
Approved systems depend on the process of diffusion to move oxygen in and carbon
Not Approved dioxide out.
Figure 5 Fish ensure a constant flow
The Respiratory System in Fish of water over their gills by opening and
In fish, the gas exchange organs are the gills. The gills are exposed directly to closing their mouths or by swimming.
the water (Figure 5). Like lungs, gills have many capillaries that bring blood
very close to the water so that oxygen can diffuse from the water into the
blood. Similarly, carbon dioxide can diffuse from the blood into the water.
Fish do not actually breathe in the same way humans do, but you may have
noticed fish opening and closing their mouths to create a flow of water over To see a video showing the
their gills. Some fish need to swim constantly to keep a supply of oxygenated respiratory organs of fish,
water flowing over their gills. GO TO NELSON SCIENCE

Diseases of the Respiratory System
Because the respiratory system is constantly exposed to substances in the air,
it is not surprising that is it affected by many different diseases.
Tuberculosis
DID YOU KNOW? Tuberculosis (TB) is an infectious disease, which means that it is easily
TB Around the World passed between people. It is caused by bacteria that enter your body when
TB is on the increase around the world, you breathe. The bacteria grow in your lungs, although the disease can
especially in developing countries. It spread to other parts of your body, including your nervous system and your
has been estimated that more than
bones. TB has fairly general symptoms: fever, cough, weight loss, tiredness,
8 million new cases develop and
2 million people die from TB each year. and chest pain. If untreated, the disease can be fatal. A chest X-ray is one of
the tests used to diagnose TB (Figure 6). However, other conditions such as
pneumonia may show similar results on an X-ray.
Figure 6 This chest X-ray shows

evidence of TB in the upper part of the
lung on the right.
To confirm a diagnosis of TB, medical technicians examine samples of

stomach or lung secretions. One of the problems with TB is that, after the
initial contact, the bacteria can remain dormant in the body for decades.
Once diagnosed, however, the disease can be successfully treated with
medicine and a few weeks of hospitalization.
Cancers
Tobacco smoke, both first-hand and second-hand, is a serious threat to the health
of the respiratory system. As you read in Section 2.7, tobacco smoke contains
many known carcinogens. These chemicals contribute to cancers not only of the
lungs but also of the mouth, esophagus, larynx, pancreas, and bladder.
SARS
In early 2003, Canada—Toronto in particular—became gripped with fear of
a new, deadly disease known as severe acute respiratory syndrome (SARS).
SARS spread from a region of China to 37 countries around the world,
threatening to become a global epidemic. In total, Canada identified 438
cases; 44 of these patients died. The symptoms of SARS are flulike and
include high fever, shortness of breath, dry cough, sore throat, headache,
muscle pain, and exhaustion. A diagnosis is made based on the above
symptoms, a chest X-ray showing evidence of pneumonia, and positive lab
results of cell samples taken from the patient.
RESEARCH THIS CAnADIAnS In SCIEnCE
SKILLS: Researching, Identifying Alternatives, Communicating, Evaluating SKILLS HANDBOOK
4.A., 4.B.
Dr. Sheela Basrur was chief medical officer of health in Toronto Dr. Basrur was a tireless advocate for children, immigrants, and
during the 2003 SARS outbreak (Figure 7). Under her direction, women. She died of a rare form of cancer in 2008 at the age of 51.
Toronto implemented public health measures to control and 1. Research a Canadian scientist who has made a significant
reduce the spread of SARS. Her passion for medicine and public contribution to human health.
health began during her travels through India and Nepal after she
graduated as a medical doctor. 2. Research the scientist’s specific contribution (e.g., research
findings, development of a technology, treatment, advocacy).
3. Research the cultural and educational background of this
individual and what motivated him/her to enter this field.
A. Prepare an oral or written biography of this scientist to share

with classmates. Include aspects from the research you
performed in 1, 2, and 3 above. T/I C
B. Explain why you chose to profile this particular individual. C
Figure 7 Dr. Sheela Basrur: the “SARS doctor.”
UNIT TASK Bookmark

Think about how you could use information about the respiratory system as you work on
the Unit Task on page 156.
In SUMMARY
• The respiratory system exchanges gases between • The circulatory system delivers oxygen to the
the body and the environment. Oxygen diffuses cells and removes carbon dioxide from the cells.
into the body, and carbon dioxide diffuses out. • Many diseases such as tuberculosis, cancers, and
• The main parts of the human respiratory system SARS aff ect the respiratory system.
are the nose, mouth, trachea, bronchi, lungs, and • The respiratory system in fish includes gills,
diaphragm. which obtain oxygen from the surrounding water
• Breathing brings air into and out of the lungs so and get rid of carbon dioxide.
that gas exchange can occur.
• Gas exchange takes place in the alveoli, which are
surrounded by capillary networks containing blood.
CHECK YOUR LEARnIng

1. Name the main organs and structures of the respiratory 5. (a) Why is an X-ray insufficient to make a positive
system. K/U diagnosis of tuberculosis?
2. What is the role of the epithelial tissue that lines the (b) What test is required to confirm a diagnosis of TB? K/U
trachea and bronchi? K/U 6. Describe the similarities and differences between the
3. How does an animal’s respiratory system depend on its respiratory systems of humans and fish. K/U
circulatory system? K/U
4. Explain the difference between breathing and gas
exchange. K/U
3.7 Organ Transplantation
The Engage in Science story at the beginning of this chapter introduced you
to a young woman who received a replacement trachea. This replacement
trachea was a combination of the cartilage
from a donor and Claudia’s own cells,
grown onto the cartilage “scaffold.” This new
transplant technology was very successful
Organs Tissues for Claudia.
Tissue transplants have been performed
heart
corneas
since the early 1800s, when blood
transfusions were first explored. The first
lungs heart valves successful organ transplant (a kidney)
occurred in 1954. The living donor and the
veins
liver recipient were identical twins. Since that
skin time, the science and the technology have
kidneys advanced considerably.
bone
The list of organs that can be successfully
pancreas transplanted now includes the heart, liver,
ligaments
lung, pancreas, and intestines. Transplantable
intestines carttilage
tissues include the cornea, skin, bone,
tendons bone marrow, tendons, and blood vessels
(Figure 1). Some organs and tissues can be
successfully and safely transplanted from
living donors. Other body parts can be taken
only from deceased donors.
Benefits and Risks

Figure 1 Many tissues and organs can be transplanted. Both the recipient and the donor (or donor’s
family) benefit from the transplantation. The
To find out more about tissue and most obvious benefit is that the recipient can live a healthy, normal life. The
organ transplantation in Canada, benefit to the donor (or the deceased donor’s family) is the satisfaction of
GO TO NELSON SCIENCE knowing that the donated organ saved someone’s life. In addition, medical
researchers have gained a wealth of new knowledge about the human body
as a result of the research in this area. Because of this, society as a whole
benefits.
DID YOU KNOW? Unfortunately, there are also some risks associated with transplant
The Long Wait surgery. The biggest risk is rejection. The recipient’s immune system may
There are far more people waiting for recognize the new organ as foreign material and try to destroy it. The
transplants than there are available chance of rejection can be minimized by using tissues that are genetically
organs, so there are usually long
similar to those of the recipient. However, even if the tissues are matched
waiting lists. There are, on average,
about 1700 people on waiting lists
as closely as possible, most transplant patients will need to take drugs to
for organ transplants in Ontario. Up prevent the immune system from rejecting the new tissue or organ. This
to 30 % of people on waiting lists die solution also presents a risk, however. With the immune system suppressed,
before a suitable organ is found. the body’s ability to fight off infections is reduced.

Living Donor Organs
Living donor organs come from a living person who chooses to donate
a kidney, a lobe of one of their lungs, or a part of their liver.
A living donor lung transplantation requires two donors,
each providing one lobe of a lung. These two lobes
are then transplanted into the recipient (Figure 2).
Kidney donation requires only one donor, who
can lead a normal life with one remaining kidney
after donating the other. In the case of a liver recipient
transplantation, doctors remove one lobe of the left lobe of right lobe of
donor’s liver and transplant it into the recipient. lung from lung from one
another donor donor
The liver has a unique ability to regenerate
Figure 2 Removing part of one lung has minimal long-term effects on
or grow again. The lobe that is transplanted will, the donors. The two transplanted parts provide adequate lung function
over time, form new tissue and function as a for the recipient.
complete liver. The donor’s liver will also regenerate
new tissue to replace the removed portion.
In most cases, living donors are relatives of the
recipient. This increases the chance that the organ offered
for donation will be an appropriate genetic match, and the
risk of rejection is minimized. An added advantage of a living
donor is the reduced waiting time.
Obviously, there is some risk to donors. In the normal body,
duplicate organs mean that if one organ fails, the other still
functions. This backup system is lost or reduced after a donation.
In addition, there are risks associated with any major surgery.
Deceased Donor Organs

The majority of organs for transplantation come from deceased
persons. The decision to donate organs after death is usually
made by the individual while the person is alive (Figure 3).
However, family members can give consent to donate the organs
after a person has died even if no donor card was signed. Figure 3 Signing a donor card and informing
family members of your decision makes organs
Signing a donor card and informing family members of your and tissues available for donation.
decision makes organs and tissues available for donation.
When a potential organ donor dies, the organs must be checked
to determine if they are healthy and undamaged. Then a search is done for
potential recipients. Medical professionals ensure that the organs go to the The Trillium Gift of Life Network
encourages life-saving organ
most appropriate person. They take many factors into account, including and tissue donations. For more
blood and tissue types, the ages and locations of the donor and the information,
recipient, and how long the recipient has been waiting for a transplant. GO TO NELSON SCIENCE
Xenotransplantation
Xenotransplantation is the transplanting of body parts from one species xenotransplantation the process of
to another. This is not a new idea. Heart valves from pigs have already been transplanting an organ or tissue from one
species to another
used to replace damaged human heart valves. However, these valves have
been chemically treated to kill the cells, so they are no longer considered
living tissue. Rejection of living tissue is a major hurdle.
NEL 3.7 Organ Transplantation 97

RESEARCH THIS THE ETHICS OF XEnOTRAnSPLAnTATIOn
SKILLS HANDBOOK
SKILLS: Researching, Analyzing the Issue, Defending a Decision, Communicating, Evaluating 4.A., 4.C.
The idea of xenotransplantation is a very controversial one. 1. Research Canada’s position on xenotransplantation.
Using tissues or organs from other species could potentially save 2. Research to determine if, and where, research on
hundreds of human lives every year. Many people object to the xenotransplantation is being carried out.
idea of having part of another animal in their body. Others are
opposed to killing animals to use their organs for transplantation. GO TO NELSON SCIENCE
In Canada, there are no studies of xenotransplantation involving

A. Prepare a summary highlighting the potential benefits and
humans, but the Canadian Public Health Association has discussed
risks of xenotransplantation. T/I A
the issue. Many question have been raised.
B. Briefly describe the current status of xenotransplantation in
• Is xenotransplantation needed?
Canada and elsewhere in the world. T/I
• What are the risks to the public? Is this risk acceptable?
C. What is your position on the issue of xenotransplantation?
• What human and animal issues need to be considered? Prepare and present a statement outlining your position in
• How should xenotransplantation be regulated and controlled? a format of your choice. Be sure to include information and
• What are the alternatives to xenotransplantation? arguments to support your position. T/I C A
In SUMMARY
• Transplantation involves the transfer of living • Rejection is the biggest risk for transplant
tissues or organs from one person to another. patients. Time spent on a waiting list is a second
• Donated tissues and organs can come from living risk factor.
or deceased donors. Transplants from deceased • Xenotransplantation is the transfer of living
donors are much more common than from living tissues or organs from one species to another,
donors. usually from other animals to humans.
CHECK YOUR LEARnIng

1. Distinguish between living donor transplants and deceased 5. Define xenotransplantation. Why is it a controversial
donor transplants. Which type is more common? K/U issue? K/U
2. Why is the list of living donor organs much shorter than 6. It has been suggested that everyone should be required
the list of deceased donor organs? K/U to be an organ donor. What are the arguments for and
3. Briefly describe the procedure for a living organ donation. K/U against this suggestion? Where do you stand? Explain your
position. C A
4. What are the two main risks for transplant patients? K/U

The Musculoskeletal System 3.8
Imagine that all 206 of the bones in your body suddenly disappear! You are
now just a big blob of soft tissues on the floor. Your arms and legs are like
rubber. You cannot move from one place to another. Your brain could be
damaged by the slightest bump. This may be a disturbing image, but it gives musculoskeletal system the organ
system that is made up of bones and
you a sense of how important our musculoskeletal system is (Figure 1). The
skeletal muscle; the system that supports
musculoskeletal system is made up of all of the bones in your body and the the body, protects delicate organs, and
muscles that make them move. makes movement possible
Structural Features
The skeleton consists of three different types of connective tissue: bones,
ligaments, and cartilage. Bone tissue is hard and dense. It consists of bone
cells within a matrix of minerals (mainly calcium and phosphorus) and muscular skeletal
system system
collagen fibres. Canals inside the bones contain nerves and blood vessels
(Figure 2). Only a small percentage of bone tissue is actually living.
Figure 2 The canals in bone tissue provide space for blood vessels and nerve cells.
Ligaments are tough, elastic connective tissues that hold bones together at
the joints. They are made up mostly of long fibres of collagen. Cartilage is a
dense connective tissue found in the ear, nose, esophagus, the disks between Figure 1 The bones and muscles work
our vertebrae, and joints (Figure 3). Cartilage is made up of special cells in a together to provide structure, support,
matrix of collagen fibres. It provides a strong, flexible, low-friction support protection, and movement.
C03-F20-UAOS10SB.ai
for bones and other tissues.
femur Illustrator
ligaments
cartilage
Figure 3 The knee joint is held together

tibia by several ligaments. There is a pad of
cartilage that acts as a cushion between
UAOS10SB the ends of the bones (femur and tibia).
0-17-635528-6
NEL 3.8 The Musculoskeletal System 99
C03-F21-UAOS10SB.ai
Figure Number C03-F20-UAOS10SB.ai
The other part of the musculoskeletal system is the muscle. Muscle tissue
consists of bundles of long cells called muscle fibres that contain specialized
proteins. These proteins cause the muscle to contract when signalled by
nerve cells. When they contract, the muscles get shorter and thicker.
Skeletal (voluntary) muscle tissue is one of the three types of muscle tissue.
The others are smooth (involuntary) muscle, mostly located in the intestines,
and cardiac muscle in the heart.
Skeletal muscle is attached to bones by tendons, allowing the movement
of body parts (Figure 4).
bone
tendon
muscle
(b)
bundle of
muscle fibres
Figure 4 (a) Muscle consists of muscle
fibres arranged in bundles. (b) Muscle
cells have a unique structure that is
visible under the microscope as stripes
across the cell. This enables muscle
cells to shorten when stimulated. (a) muscle fibre (cell)
Support, Protection, and Movement

The main role of the skeleton is to provide structure and support for our
bodies and anchor points for our muscles. Some bones also protect the soft
internal organs and the brain. Bones also store calcium and other minerals
needed by the organism, and some bones contain marrow, which produces
C03-F22-UAOS10SB.ai
red and white blood cells. Cartilage provides a smooth surface where bones
come together at a joint, preventing damage to the ends of the bones. We
use skeletal muscle for voluntary movements of the body, such as walking.
How Muscles
Illustrator Make Bones Move
Joel
Each end of and Sharon
a skeletal Harrisis connected by tendons to one or more different
muscle
bones in the skeleton. Tendons are similar to ligaments but are less elastic and
connect muscles to bones. When muscles contract in response to signals from
the nervous system, they exert a force. This force moves one or both of the
bones to which the muscle is connected. Muscles can pull, but they cannot
push, so skeletal muscles always work in opposing pairs or groups (Figure 5).
UAOS10SB biceps biceps

0-17-635528-6 contracts relaxes
Figure Number C03-F22-UAOS10SB.ai

Figure 5 The triceps and the biceps
Company
work Nesbitt Graphics
together to flex and straighten the elbow elbow
Creative
elbow. Skeletal muscles commonly work flexes triceps triceps
straightens
inPass
pairs. 3rd Pass relaxes contracts
Approved
100 Chapter 3 • Animal Systems C03-F23-UAOS10SB.ai NEL
Not Approved
Problems with the Musculoskeletal System normal bone osteoporotic bone
The musculoskeletal system, like other systems, is susceptible to diseases.

Osteoporosis is a disease that can affect people of all ages but is a more
common problem among older women. This disease involves loss of bone
tissue, making the bones brittle and weak (Figure 6). Osteoporosis does not
cause any pain, so only a bone density test can indicate the presence of the
disease. It is linked to a loss of calcium in the bones, so women are encouraged
to consume foods or supplements containing calcium and vitamin D. Physical
exercise can also help increase bone mass and lessen the risks of osteoporosis.
Because of its role in support and protection, the musculoskeletal system
experiences physical impacts and stresses. Extreme movements can tear
ligaments, tendons, and muscle tissues; severe impacts can fracture bones.
Figure 6 Bone tissue loss in
After a serious injury, X-rays are taken to determine if a bone is fractured osteoporosis increases the risk of bone
and how the injury should be treated. fractures.
The Skeletal System in Other Animals

All vertebrates (animals with backbones) have musculoskeletal systems C03-F24-UAOS10SB.ai
similar to ours, with muscles attached to bones inside the skin. Invertebrates,
however, have very different systems. Some, like worms and jellyfish, have
no rigid frame to give them structure. Others—insects and arthropods—
have their skeletal system on the outside. This hard external structure is Illustrator
called an exoskeleton (Figure 7). Muscles attached inside the exoskeleton
enable the animal to walk, fly, eat, and so on. Figure 7 The exoskeleton of this beetle
protects its internal organs.
UNIT TASK Bookmark

Information about joints in this section could be useful as you prepare to answer the
Unit Task on page 156.
In SUMMARY
UAOS10SB
• Th
e musculoskeletal system provides structure
0-17-635528-6 • Muscle cells and tissues can contract, causing the
and support for the body and enables movement. bones to move.
• Th e skeleton contains three types of connective
Figure Number • Loss of bone tissue due to osteoporosis makes
C03-F24-UAOS10SB.ai
tissue: bone, ligaments, and cartilage.
CompanyMuscles bones
Nesbitt Graphics more susceptible to fractures.
contain muscle tissue and are connected
Creative to bones • Many invertebrates have exoskeletons to protect
by special tissues called tendons.
Pass Revised Final
their internal organs.
Approved X
Not Approved
CHECK YOUR LEARnIng
1. List the main functions of the musculoskeletal system. K/U 6. Research has shown that there are basically two types of
2. Differentiate between a tendon and a ligament. K/U skeletal muscle fibres: fast twitch and slow twitch. The
muscles of our neck and back have lots of slow twitch
3. Why is skeletal muscle tissue considered “voluntary”
muscle fibres. These muscles are important in keeping
muscle? K/U
our posture. Where in the body would you expect to find
4. Use a simple diagram to describe how opposing muscle muscles with a lot of fast twitch muscle fibres? Explain
pairs produce movement of the lower leg. K/U C your answer. A
5. Bone fractures are more common among senior citizens
than among young people. Propose an explanation. A
NEL 3.8 The Musculoskeletal System 101

Exploring the Structure and Function SKILLS MENU

of Tissues in a Chicken Wing Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
In this activity, you and a partner will identify the tissues that make up Controlling Variables Communicating
a chicken wing. You will dissect the chicken wing in order to relate the
structure of these tissues to their functions.
Purpose
To relate the structure of a bird’s wing to its function. lower wing

• lab apron
• disposable gloves
• dissection pan
• dissecting scissors
upper wing
• forceps wing tip
Figure 1
• blunt probe
• pencil 4. At the cut end of the upper wing, slip the tip
• 5 different-coloured pencils of the dissecting scissors between the skin and
the muscles underneath, as shown in Figure 2.
• fresh chicken wing
Cut the skin lengthwise, stopping before you
Wear disposable gloves for this activity. There could be reach the lower wing. Be careful to cut only skin.
bacteria on the chicken wing, or on any of the implements, Use the forceps to carefully remove the skin.
that could make you very sick.
Observe and describe the skin and any other
tissue connected to it.
Procedure
SKILLS HANDBOOK
1.B., 2.A.
Review the section in the Skills Handbook on using sharp

instruments safely.
Always wash your hands thoroughly with hot water and
soap after handling poultry products. They may contain
Salmonella bacteria.
1. Decide which partner will perform the dissection

and which will observe and record observations.
The partner performing the dissection will put
on the lab apron and disposable gloves. Figure 2 Step 4
2. Obtain one fresh chicken wing per pair. Place the
wing in a dissection pan. 5. Remove the skin from the lower wing in the
3. Compare the external features of your chicken same way, as shown in Figure 3. Leave the skin
wing with those shown in Figure 1. on the wing tip. Using scissors, remove any
tissues covering the muscle. Use the blunt probe
to separate the individual muscles from each
other. Be careful not to tear any muscles.
10. Straighten the chicken wing and hold it
horizontally above the tray. Pull on each muscle
and note the movement that results. Turn the wing
upside down and bend the joints. Pull on each
muscle and note the movement that results. On
your drawing, use a fourth colour to indicate each
muscle that flexes (bends) a joint. These muscles
are called “flexors.” Use a fifth colour to indicate
each muscle that extends (straightens) a joint.
Figure 3 Step 5 These muscles are called “extensors.”
11. Use the scissors to cut through the middle of a
6. Examine the muscle tissue. Describe its flexor muscle for the lower wing. Record what
appearance and texture. Draw the chicken wing, happens to the wing.
showing all of its separate muscles.
12. Cut through the middle of an extensor muscle for
7. Examine the bone structure of the wing. Depict the lower wing. Record what happens to the wing.
in your drawing each of the bones and where
13. Dispose of the chicken wing as directed by your
they meet at joints. Bend and straighten the joint
teacher. Place your dissection equipment in the
and observe how the bones fit together. Look at
collection bin as directed.
the “shoulder” part of the wing. The shiny, white
covering of the joint surface is cartilage. Use a
coloured pencil to draw the cartilage. Start a key
to identify what each colour represents. (a) Complete and label your diagram. C
8. Figure 4 shows a ligament. Using the forceps, find (b) Consider all of the tissues you observed during
as many ligaments as possible in your chicken your dissection of the chicken wing. T/I
wing. Use a second coloured pencil to show these (i) Name as many of these tissues as possible.
ligaments in your drawing. (ii) Categorize them as epithelial, connective,
nerve, or muscle tissue.
(iii) Describe their functions in a live bird.
(c) What tissue did you not observe that is necessary
for a live bird to move its wing? T/I
(d) Relate the functions of cartilage, ligaments, and

tendons to their appearance in a chicken wing. T/I
Figure 4 Step 8
Apply and Extend
(e) Refer to your drawing. Identify the muscles,
9. Find as many tendons as possible in your bones, and joints in the chicken wing that would
chicken wing (Figure 5). Use a third coloured correspond to the muscles, bones, and joints in
pencil to show these tendons in your drawing. your own arm. A
(f) Compare the range of motion of a bird’s wing

with that of the lower part of a human arm. Why
can you not compare the range of motion of the
entire limb from this activity? A
Figure 5 Step 9
3.10 The Nervous System
There are some organs and tissues that we can live without. We could lose
nervous system the organ system
that is made up of the brain, the spinal
one or both kidneys and still survive with the help of a machine. We could
cord, and the peripheral nerves; the even live with a mechanical heart. But the brain is essential! No one can live
system that senses the environment and without a brain. The brain controls almost everything that happens in your
coordinates appropriate responses body. Because it is so crucial to our survival, it is not surprising, then, that
central nervous system the part of the the brain is protected inside a very hard skull. However, this protection does
nervous system consisting of the brain not completely guarantee its safety; the brain is a very fragile organ.
and the spinal cord The brain is just part of the nervous system: that delicate network of
peripheral nervous system the part nerves that carries messages around the body, allowing us to interact
of the nervous system consisting of the successfully and safely with our environment.
nerves that connect the body to the
central nervous system
Structural Features
The core of the nervous systemthe central nervous systemconsists of the
brain and spinal cord. The nerves that carry signals between the central nervous
system and the body make up the peripheral nervous system (Figure 1). The
peripheral nervous system relays information about the internal and external
environments to the brain. It also relays instructions from the brain to other
parts of the body to control many of the body’s functions and responses. The
peripheral nervous system can be further divided into three groups of nerves:
• nerves that control the voluntary muscles
• nerves that carry information from vertebra
the sensory organs, such as the eyes,
ears, taste buds, and touch receptors,
to the brain
• nerves that regulate involuntary
functions such as breathing, heartbeat,
and digestion
To protect it from physical damage,
the central nervous system is shielded by
bones. The skull protects the brain, and the spinal peripheral
cord nerve
spine guards the spinal cord (Figure 2). The
brain and the spinal cord are surrounded
Figure 2 Each vertebra has a space
Figure 1 The peripheral nervous
by cerebrospinal fluid. This fluid helps in the middle for the spinal cord and
system (shown in brown) brings cushion the brain and spinal cord from grooves on either side to accommodate
information from the body to the central
C03-F26-UAOS10SB.ai injury, transports chemicals, and removes the peripheral nerves.
C03-F27-UAOS10SB.ai
nervous system (pink). wastes that are produced in the brain.
neuron a nerve cell

Nerve Tissue
Illustrator Nerve tissue is made up of special cells called neurons.
Illustrator Nerve tissue is found
Joel WRITING
and Sharon Harris
TIP in the brain, spinal cord, and nerves. There are an
Joelestimated 100Harris
and Sharon billion
Recording Measurements neurons in the human brain. Neurons are communication specialists. Their
When measuring using an instrument, structure enables them to send information around your body. They do this by
measure three times to ensure it
conducting electrical signals—nerve impulses—from one area of the body to
is correct. Use a table to record
quantitative measurements and another (Figure 3). The axons of some neurons are covered by a fatty material
double-check that numbers are accurate called myelin. The myelin sheath acts like the insulation on an electrical wire,
and in the correct cell of the table. preventing electrical impulses from passing to the wrong neuron.
nerve cell nerve cell muscle cells
myelin sheath nerve
bundle of
connective
nerve cells
direction of signal tissue
Figure 3 Electrical signals pass through neurons in only one direction.

C03-F28-UAOS10SB.ai
Nerves are bundles of neurons that are surrounded by connective tissue

(Figure 4). Nerves allow a two-way flow of information even though each myelin sheath
neuron transmits information only in one direction.
Illustrator
Many cells in the body undergo
Joel andcell division
Sharon Harristo repair an injury. Injured nerve cell
neurons in the central nervous system, however, do not easily regenerate.
Some neurons in the peripheral nervous system can regrow to repair a
small gap (a few millimetres) between the ends of severed nerves.
Sensory Receptors
Sensory receptors are special cells or tissues that receive input from our
-6 external environment and send signals along the peripheral nerves to Figure 4 Nerves can transmit many
signals at the same time.
our central nervous system. Our eyes have receptors that are sensitive to C03-F29-UAOS10SB.ai
r C03-F28-UAOS10SB.ai
light. The ears, mouth, nose, muscles, and skin have other sensory receptors.
Nesbitt Graphics
2nd Pass
T RY THIS MAPPING SENSORY RECEPTORS Illustrator
X
SKILLS: Controlling Variables, Performing, Observing, Analyzing, Communicating Joel and Sharon Harris SKILLS HANDBOOK
3.B.
In this activity, you will explore the touch sensitivity of the skin.
You will work with a partner to discover the minimum distance
between “touch points” that can be felt on different areas of skin.
Equipment and Materials: caliper or paper clip; ruler;
blindfold (optional)
1. Create a table in which to record observations for point
distances of 5 mm, 10 mm, and 15 mm to be tested at the
following locations: fingertip, palm, inner arm, knee cap,
behind the knee, back of the neck. UAOS10SB
2. Adjust the caliper so that the distance0-17-635528-6
between the points Figure 5 Do not hurt your partner with the caliper.
matches one of the values in your table.
3. Touch the subject’s skin firmly, at oneFigure
of theNumber A. What minimum distance is required to discriminate between
locations listed, C03-F29-UAOS10SB.ai
with both points of the caliper at the Company two points of contact at each location? What does this tell
same time (Figure 5). Nesbitt Graphics
The subject should not know the distance. Perform several you about the concentrations of touch receptors? T/I
Creative
tests, using different distances, at each location. The subject 2nd Pass
Pass
B. Based on your observations, predict which locations have the
should indicate, each time, whether he or she feels one point highest and lowest concentrations of touch receptors. T/I
Approved X
of contact or two. Record the responses.
Not Approved
NEL 3.10 The Nervous System 105

taste touch In addition to the familiar senses (sight, hearing, taste, smell, and touch),
hearing
we have receptors in our muscles and skin that are sensitive to pressure,
vision
smell temperature, and pain and receptors that make us aware of our balance,
position, and motion. All of the sensory receptors around the body send
information to the brain, where it is processed. Information from different
sensory receptors goes to specific parts of the brain (Figure 6).
Communication, Coordination,
and Perception
The overall function of the nervous system is to transmit signals in both
directions between your brain and the rest of your body. This allows your
body to respond both to the outside world and to the internal environment.
Figure 6 Different parts of the brain
receive information from our various For example, the nervous system tells the respiratory system when to
senses. increase the breathing rate and tells the circulatory system when the heart
should beat faster. The nervous system lets us know when we should eat or
drink and when we should stop. Another function of the brain is perception:
interpreting or making sense of all the information we receive from our
environment.
C03-F30-UAOS10SB.ai
The spinal cord has another important function: it acts as a short cut
for reflexes. Reflexes are actions that do not require the involvement of the
brain; they occur without conscious thought. Quickly moving your hand
away from a hot surface is an example of a reflex action.
Illustrator
Nerve Impulses and the Bionic Arm
The human arm is made up of many specialized tissues with different
functions. These tissues work together to accomplish the tasks that we
perform using our arms, such as brushing teeth, carrying books, writing
assignments, and so on. As you may have noticed in Activity 3.9, there are
many similarities in limb structure and function between animal species.
Scientists and engineers used everything they know about the human arm
Figure 7 The bionic arm is still in to develop an artificial arm that is controlled by nerve impulses (Figure 7).
development, but already it is having It is designed for people who have had an arm amputed as a result of an
a positive impact on people’s lives.
accident or disease. Nerves that once served the amputated arm are rerouted
and connected to healthy muscle in the chest and other surrounding
muscles. The rerouted nerves grow into these muscles and direct impulses,
DID YOU KNOW? originally intended for the amputated arm, to the robotic arm. This lets the
Gene Hunter wearer move the prosthetic arm simply by thinking about it.
Dr. Michael Hayden was named
“researcher of the year” for 2008
by the Canadian Institutes of Health Diseases and Disorders of the
Research. Dr. Hayden is the Director Nervous System
of the Centre for Molecular Medicine
and Therapeutics at the University
Problems with the nervous system can be very serious. The brain can be
of British Columbia. Among many permanently damaged by viruses or bacteria. Diseases can also be caused by
accomplishments, this world-renowned problems in other body systems. For example, multiple sclerosis is caused
geneticist identified the DNA responsible by a malfunction of the immune system. This disease destroys the myelin
for Huntington disease and other sheaths of neurons in the central nervous system. Symptoms, which worsen
diseases of the nervous system.
as the disease progresses, include muscle weakness, slurred speech, and
GO TO NELSON SCIENCE difficulty walking.

Physical trauma, such as a fall or a blow, can cause severe damage to
the spinal cord, often resulting in paralysis. One of the most serious—and
possibly avoidable—sports injuries is damage to the brain. We hear about
hockey players suffering from head traumas, ranging from concussions
to death, when their heads hit the ice. Helmets can reduce the effect of
head trauma. Helmets are mandatory in Canada for motorcyclists, hockey
players, and competitors in many other sporting events. They are strongly
recommended for any activity that has a risk of head injury.
If someone is hit on the head and a doctor suspects brain injury, the
person is likely to be sent for a CT or MRI scan. The CT scan in Figure 8
shows an area where blood has collected between the brain and its protective
membrane, causing pressure on the brain tissue.
Figure 8 CT head scan
RESEARCH THIS DNA SCREENING
SKILLS HANDBOOK
SKILLS: Defining the Issue, Researching, Analyzing the Issue, Defending a Decision 4.A., 4.C.
Some nervous system disorders are linked to certain genes. This 2. Research the option of genetic screening for this disease.
means that there is a chance that the disorder could be passed
via the DNA from parent to child. One such disorder is known as
Huntington’s disease (sometimes called Huntington’s chorea). A. Imagine that a relative has been diagnosed with Huntington’s
1. Research Huntington’s disease, including how it affects the disease. Should you and your family get tested for the
nervous system and how it is treated. Huntington’s disease gene? Defend your answer. T/I C A
UNIT TASK Bookmark

How can you use this information about the central nervous system as you work on the
Unit Task on page 156?
IN SUMMARY
• The nervous system is made up of the central • The body has millions of sensory receptors that
nervous system and the peripheral nervous receive information from the environment. The
system. peripheral nervous system sends this information
• The central nervous system consists of the brain to the central nervous system.
and the spinal cord. The peripheral nervous • The main functions of the nervous system are
system consists of nerves that connect all parts of communication and coordination of body
the body with the central nervous system. activities.
• Nerves are made up of bundles of neurons, each • Diseases and injuries can cause serious damage to
surrounded by connective tissue. the nervous system.
CHECK YOUR LEARNING

1. Briefly describe the structure and function of the nervous 5. What is the function of our sensory receptors? Mention at
system. K/U least two different sensory receptors in your answer. K/U
2. Sketch a neuron and label its structures. K/U C 6. What medical technology can be used in the diagnosis
3. Create a flow chart of the events in the nervous system of head injuries or injuries of the central nervous system?
when you swing at a baseball with a bat. Start with the What is the advantage of this type of technology? K/U A
sight of the ball coming toward you. K/U C 7. After a car accident, Jila lost the hearing in one ear.
4. Give three examples of the nervous system coordinating Examinations indicate no damage to the eardrum. Suggest
activities in other body systems. K/U a reason for the loss of hearing. T/I
NEL 3.10 The Nervous System 107
3.11 Interactions of Systems
All cells have to perform the same basic activities to stay alive: they use
energy and materials from the environment, store materials, get rid of wastes,
move substances to where they are needed, grow, and reproduce. Similarly,
most living things have to perform similar basic functions: they obtain food,
transport necessary substances (such as food, other nutrients, and oxygen) to
the cells, remove unwanted substances from the cells, grow, and reproduce.
Very simple animals can perform these functions with fairly simple
arrangements of cells and tissues. Larger, more complex animals, however,
need organ systems like the ones you have learned about in this chapter. Even
these organ systems do not work independently. They interact with each
other to allow the animal to carry out all the processes necessary for life.
In this chapter you have looked at five organ systems in detail: the
digestive system, the circulatory system, the respiratory system, the
musculoskeletal system, and the nervous system. Other organ systems
include the urinary system, the reproductive system, the integumentary
system, and the endocrine system. How do all these systems interact?
To find out more about other organ Obviously it is a very complicated arrangement. Medical professionals
systems, and researchers around the world are still trying to puzzle out some of the
GO TO NELSON SCIENCE details. We can, however, consider some of the system interactions within
a simplified version of an organism (Figure 1).
oxygen and nutrients pass from
circulatory system into body body tissues
tissues; carbon dioxide and (including
oxygen passes from air
wastes pass from body tissues musculoskeletal
into circulatory system; wastes from body
into circulatory system and nervous systems)
carbon dioxide passes processes pass from
from circulatory circulatory system
system into air into urinary system
respiratory liquid waste

system products
circulatory
system
heart urinary system
food
solid waste
mouth products
Figure 1 A schematic diagram

digestive
of an organism, showing the
system nutrients pass from food in digestive
respiratory system, circulatory
system, body tissues, urinary system into circulatory system
system, and digestive system

Let’s look at some points of interaction between these systems. Consider
the digestive system and the circulatory system. The digestive system breaks
down food into small molecules that can pass through the walls of the
digestive tract. Without a circulatory system, only the tissues right next to
the digestive tract would receive nutrients. The circulatory system provides
a way to transport nutrients to all tissues in the organism. Thousands of
capillaries surround the digestive tract, carrying blood that absorbs the
nutrients (Figure 2). Materials move from a region of higher concentration
to a region of lower concentration by diffusion. The circulatory system
continuously delivers low-nutrient blood to the capillaries surrounding
the digestive system, and carries away blood that now contains a high
concentration of nutrients. This nutrient-rich blood then enters larger blood
vessels and travels to every part of the body, where nutrients diffuse from
the blood into the cells.
Figure 2 The digestive tract is surrounded by blood vessels. The blood absorbs nutrients for
delivery around the body.
The musculoskeletal system—particularly the skeletal muscle tissue—

uses oxygen and nutrients to make the body move. Every time a muscle
contracts, its rate of cellular respiration increases. To fuel this active system,
the circulatory system must deliver a constant supply of oxygen and
nutrients. In addition, it must remove waste products such as carbon dioxide
and, during strenuous exercise, lactic acid. These wastes enter the blood by
diffusion through capillary walls and are carried away for “disposal.” Carbon
dioxide, as you know, passes into the lungs and leaves the body through the
respiratory system. The liver—an accessory organ to the digestive system—
removes lactic acid from the blood.
How are other waste products of cell activity removed from the body?
Not surprisingly, the circulatory system is involved. The blood collects waste
products as it travels through all the body’s tissues. In particular, it collects
nitrogen-containing waste products of protein breakdown. As the blood
travels through the kidneys (part of the urinary system), the unwanted and
toxic substances are removed (Figure 3). These substances, dissolved in
Figure 3 Each kidney processes almost
water, drain into the bladder for temporary storage. The mixed solution is 100 L of blood each day, producing
called urine, and is periodically excreted from the body. approximately 1 L of urine.
NEL 3.11 Interactions of Systems 109

Other Interactions Between Systems
The examples discussed above apply to humans and other mammals, and
most vertebrates. Some animals, depending on their environment and needs,
have developed interesting alternatives to the familiar organ systems. For
instance, a jellyfish does not have a circulatory system. Its digestive system
extends into the animal’s fluid-filled body cavity and exchanges nutrients
directly with this fluid. The animal has so few cells, and such a small demand
for food, that this arrangement is adequate to distribute nutrients. Even
animals that have familiar digestive tracts may have developed interesting
Figure 4 A chameleon’s tongue can adaptations to acquire food. Two examples of muscular adaptations are the
stretch out to be longer than its body. elephant’s trunk and the chameleon’s tongue (Figure 4).
The tongue is sticky at the end to catch
insects. The integumentary (skin) system and muscles interact to provide
information to the nervous system. There are sensors in our skin that detect
temperature, pressure, pain, and so on. The ears of many mammals are
mobile—thanks to muscles—so they can be directed toward a sound
DID YOU KNOW? (Figure 5). The shape of the ears amplifies the sound, increasing the amount
Tapeworms: Just the Essentials
of information that the nervous system can collect. Similarly, the eyes of
Because of where they live—inside many animals include muscles that control the amount of light entering the
the digestive systems of vertebrate eye, improving vision at a variety of light levels.
animals—tapeworms do not need to In birds the musculoskeletal system and the integumentary (skin) system
find, capture, and digest food. They do
interact to make flight possible. Specialized flight feathers grow from the
not need to protect themselves from
predators or worry about the weather. skin, but they would be useless without the bird’s light, hollow bones, and
Tapeworms have almost no organs powerful flight muscles (Figure 6).
or organ systems. They do not need Respiratory systems are quite different in air-breathing animals than in
these structures; they can just absorb aquatic animals that get their oxygen from the water. Recall from Section 3.6
food that has been digested for them!
that fish have gills that are richly supplied with blood. Oxygen and carbon
Tapeworms are really little more than
a reproductive system. Most other dioxide diffuse between the blood and water that constantly flows over the
functions are performed for them by gills. The circulatory system then carries oxygenated blood around the body.
their host. Amphibians such as newts and frogs have lungs, but can also exchange gases
through their thin skin when moist (Figure 7). In effect, the entire surface of
the body becomes part of the respiratory system.
Different groups of animals have different ways of excreting cellular
wastes. Freshwater fish carry nitrogen compounds (from protein
breakdown) in the blood until it reaches the gills. The compounds then
diffuse through the gills into the water. Thus, the fish’s respiratory system
serves double duty as an excretory system, aided by the circulatory system.
Figure 5 A jackrabbit has very large Figure 6 Most of the surface of the Figure 7 This young Eastern newt
ears so that it can hear and avoid wing is made up of feathers—part of obtains oxygen through its skin.
predators. the integumentary system—not bone
and muscle.

There are many ways in which organ systems interact. For example, the
urinary system and the reproductive system are very closely connected in
mammals—particularly in males. The nervous system works very closely
with the endocrine system. Each organ system interacts with at least one
other organ system. It is through the interaction and coordination of organ
systems that complex organisms can carry out all life functions to survive.
RESEARCH THIS SYSTEMS WORKING TOGETHER

SKILLS: Researching, Communicating SKILLS HANDBOOK
4.A., 4.B.
In this activity you will research how a specific animal performs A. Create a concept map or any other graphic organizer
an essential function: providing its cells with nutrients. For to communicate what you have discovered. Be sure to
example, you might consider how a cat hunts, eats, and digests clearly indicate the interactions between the various organ
(Figure 8). systems. C A
1. Choose an animal to investigate. It can be as familiar or as
unusual as you like.
2. Research how your animal performs this function. Pay
particular attention to which parts of the body are involved,
and to which organ systems these parts belong.
UNIT TASK Bookmark

Consider the interactions among organ systems as you are preparing to complete the
Unit Task on page 156.
IN SUMMARY
• Organ systems work together to accomplish • Animals have different ways of meeting their
specific functions. needs so organ systems vary greatly. Not all
• All organ systems in the body interact with at animals have all organ systems.
least one other organ system. • In complex animals, the circulatory system
connects all other systems in the body.
CHECK YOUR LEARNING

1. List at least three interactions of organ systems within the 5. Frogs and ducks have webbed feet. How does this illustrate
bodies of mammals. K/U the interactions of systems? A
2. (a) Which organ system interacts with most other systems 6. Briefly describe one interaction (not necessarily in humans)
in the body? between the nervous system and K/U A
(b) Explain why it is advantageous for the system named (a) the integumentary (skin) system.
in (a) to be integrated with so many other systems. K/U (b) the musculoskeletal system.
3. What two systems do amphibians use for gas (c) the respiratory system.
exchange? K/U
(d) the urinary system.
4. How is it possible for an animal like a tapeworm to live
without having a digestive system? K/U
NEL 3.11 Interactions of Systems 111

TECH ConnEct OSSLT
Monitoring the Health of an Unborn Baby

Ultrasound scanning is a technique very commonly used in North
America to monitor the health of a baby before birth. An ultrasound
technician uses a device that contains a small transmitter and
a receiver. This device is moved repeatedly across the pregnant
mother’s abdomen. The transmitter produces sound waves at a
higher frequency than the human ear can detect. These sound
waves pass through some tissue but bounce back from other
tissue. The reflected sound waves are detected by the receiver.
They are interpreted by a computer and converted into a picture of
the tissues in their path. This picture can be viewed on a television
screen (Figure 1). An ultrasound image of a fetus (unborn baby) can
provide a lot of valuable information about the baby’s size, position,
and development. In particular, this technology can help doctors
detect serious health problems in the baby, such as spina bifida.
Figure 2 Ultrasound technology is used to help guide the placement

of the needle for amniocentesis.
Some proteins in our food contain a substance called

phenylalanine. High concentrations of phenylalanine in the
body can cause damage to the nerves and brain. Normally,
phenylalanine is digested in the digestive tract. People with PKU
do not have the enzyme to digest phenylalanine, so it builds up
in the body to toxic levels. Fortunately, the consequences of PKU
can be avoided by controlling phenylalanine in the diet. PKU is a
genetic disorder, so if either of the parents has DNA associated
with PKU, there is a chance that the unborn baby might also have
Figure 1 An ultrasound image of a fetus in the uterus this DNA. Doctors can use amniocentesis to collect a sample of
Ultrasound scans can provide a lot of information, but they fetal cells and then test these cells for PKU. This gives a mother
do not reveal everything about the fetus’s development. This early warning if her baby has the condition. She can change her
technology can, however, help doctors perform another test that diet to avoid food containing phenylalanine. She can also feed
can reveal a great deal more: amniocentesis. Amniocentesis the baby a special diet after birth. These changes will ensure that
involves inserting a long needle into the uterus and taking a phenylalanine does not build up and harm the baby.
sample of the amniotic fluid that surrounds the fetus. With the help Ultrasound is a remarkable tool for monitoring health.
of ultrasound as the “eyes,” an obstetrician can safely direct the However, like many technologies, there are some risks associated
needle to the right part of the uterus (Figure 2). This fluid contains with it. There is some evidence that ultrasonic scans lasting
fetal cells, which contain DNA. The DNA is checked for genes 30 minutes or more cause brain damage in fetal mice. However,
known to cause certain diseases. the long-term effects of ultrasound are unknown. Medical use
Knowing what health problems exist for a child before it is must balance the benefits of this technology with its potential
born can be of great benefit. One example is phenylketonuria risks.
(PKU). People born with this genetic disorder lack an enzyme that
helps digest certain foods. GO TO NELSON SCIENCE
OSSLT
112 NEL
3.12
To Immunize or SKILLS MENU
Defining the Issue Defending a
Not to Immunize? Researching
Identifying
Decision
Communicating
Alternatives Evaluating
Your parents probably had you immunized against a Analyzing the Issue
range of diseases when you were a child. Or perhaps
they chose not to. They may be among the portion The Issue
of the population who believe that the health risks of
Do the benefits of immunizing children outweigh
vaccinating children outweigh the benefits. Individual
the risks? You are part of a committee that will be
decisions on whether or not to immunize are the
collecting evidence from both sides of the issue. Your
basis of a current public health controversy.
committee will present this evidence to a community
On one side of the argument are the parents who
forum and recommend whether or not children
believe that public immunization programs are a
should be immunized.
benefit to the individual and to society. They might
remember a time when pregnant mothers caught
rubella (German measles) and miscarried their
Goal
babies. Perhaps they know someone who barely To research public immunization programs and
survived polio. Or maybe they came from a place present recommendations to parents regarding
where deadly smallpox epidemics were a regular immunization for their children.
occurrence. Early-childhood vaccination programs
have eliminated many of the diseases that once killed Gather Information
hundreds of thousands worldwide (Figure 1). Work in small groups to research how immunization
works, the risks and benefits of public immunization
programs, and any available alternatives to immunization.
Identify Solutions
You may want to consider the following ideas:
• The question of the rights of the individual versus
the rights of society in general
• Respect for individual values and opinions
• Alternatives to vaccination
Make a Decision
Figure 1 Vaccinations given to children and young adults can
reduce their chances of catching certain life-threatening infections. What will you recommend to parents regarding
whether or not to immunize their children? What
Parents who oppose childhood vaccination may evidence supports your recommendations? T/I C
point out that vaccinations do not provide total

protection from disease. Some parents believe that an Communicate
increased number of vaccinations can leave a child Complete a written report that will be distributed to
vulnerable to diseases such as asthma and diabetes. parents. Your report should include the benefits and
They argue that studies into the risks of vaccines risks of public immunization programs and a final
are not done or are biased because the big drug recommendation based on the evidence. T/I C A
companies make so much money from vaccines.

CHAPTER
LOOKING BACK
3
muscular skeletal
system system
Complex animals are made Scientists use laboratory Each organ system has
up of cells, tissues, organs, techniques to explore the a specific function and
and organ systems. structures and functions of corresponding specific
animals’ bodies. structures.
• Groups
nasal cavity of similar cells that perform
amouth
common function form tissues. • The structures and functions of • Organ systems have specific
(3.1) tissues can be explored using functions within the body. (3.1, 3.3,
• Organs are made up of several laboratory techniques such as 3.4, 3.6, 3.8, 3.10)
types of tissue. (3.1, 3.3, 3.4, 3.6, dissection. (3.5, 3.9) • The structure of each organ system
3.8, 3.10) • Observations of tissue structures reflects its function. (3.1, 3.3, 3.4,
• Organ systems are made up of can be recorded in scientific 3.6, 3.8, 3.10)
organs and tissues. (3.1, 3.3, 3.4, drawings, which help relate
3.6, 3.8, 3.10) structures to functions. (3.5, 3.9)
trachea
• Models of cells and tissues can be
used to simulate structures and
bronchi functions of living
ciliated things.cells
epithelial (3.5, 3.9)
lung
bronchioles
There are four main types of Organ systems interact
alveoli Research is helping people
animal tissues. to keep the organism overcome illness and injury.
functioning.
• Epithelial tissue covers the outside • Diagnostic and treatment
of the body and lines the respiratory • Organ systems are dependent on technologies help health
system and the digestive system. each other: none can function for professionals detect and treat
(3.1, 3.3, 3.6) long without the others. (3.1, 3.11) problems. (3.4, 3.6, 3.8, 3.10)
B • Nerve tissue reaches every part of • The circulatory system, for example, • There are legal, ethical, and
the body, carrying messages to and transports oxygen around the body social concerns associated with
UAOS9SB
from the central nervous system.
Ontario Science 10SB from the respiratory system and many technological and medical
kno
Unit A Tissues: (3.1, 3.10) nutrients from the digestive system. advances, such as stem cell
03-F99-UAOS9SB
C-UAOS9SB
Figure Number
• There are three types of muscle
C02-F07D-UAOS9SB
(3.1, 3.4, 3.6, 3.11) research, DNA screening, and
Sakno
heresa
Creative
Sakno tissue: skeletal (for voluntary immunization. (3.2, 3.6, 3.10, 3.12)
Pass movement), smooth (for involuntary
Approved
Approved movement), and cardiac (for

Not approved
keeping the heart beating regularly).
(3.1, 3.3, 3.8)
pproved • Connective tissue includes blood,
bones, and cartilage. (3.1, 3.4, 3.8)

THINK NOW? hierarchy (p. 73)
tissue (p. 74)
You thought about the following statements at the beginning of organ (p. 74)
the chapter. You may have encountered these ideas in school, organ system (p. 74)
at home, or in the world around you. Consider them again and epithelial tissue (p. 75)
decide whether you agree or disagree with each one. connective tissue (p. 75)
muscle tissue (p. 75)
nerve tissue (p. 75)
cellular differentiation (p. 77)
stem cell (p. 77)
digestive system (p. 80)
circulatory system (p. 83)
artery (p. 84)
vein (p. 84)
capillary (p. 84)
electrocardiogram (ECG)
1 When blood is removed from the
body, the remaining blood cells divide
4 Our organs work independently
of each other. (p. 86)
to make more blood. Agree/disagree? respiratory system (p. 91)
Agree/disagree? alveolus (p. 92)
xenotransplantation (p. 97)
musculoskeletal system (p. 99)
nervous system (p. 104)
central nervous system
(p. 104)
peripheral nervous system
(p. 104)
neuron (p. 104)
2 Alllivingorgans in the body are made up of
cells.
5 The organ systems of a frog are the
same as the organ systems of a human.
BIG Ideas
All animal cells look the same. Animals can grow replacement body
3 Agree/disagree?
6 parts.
made of specialized
Agree/disagree?
cells, tissues, and organs
that are organized into
systems.
How have your answers changed? ✓ Developments in medicine
What new understanding do you have? and medical technology
can have social and
NEL Looking Back 115

CHAPTER
REVIEW
3
What Do You Remember? What Do You Understand?

1. Which of these levels includes all of the others: 8. (a) What is the difference between embryonic
cell, organ system, tissue, organ, organism? stem cells and tissue stem cells?
(3.1) K/U (b) Briefly describe how tissue stem cells can be
used to cure a disease. (3.2) K/U
2. Copy Table 1 into your notebook. Complete

the table by filling in the appropriate 9. (a) What does the term “regeneration” mean?
information. (3.1) K/U C (b) Can humans regenerate? Explain. (3.2) K/U
Table 1 Tissue Types in Animals 10. (a) What are the functions of the human arm?
Tissue type Structure Function (b) What are the functions of a bird’s wing?
Made up of cells that (c) What are the similarities and differences in
are able to contract these functions?
Transmitting information (d) How are these similarities and differences
around the body
reflected in their structures? (3.9) K/U T/ I
Connective
Protection and reduction 11. Name three systems that are interdependent.
of water loss Describe how they depend on each other. (3.1,
3.3, 3.4, 3.6, 3.8, 3.10, 3.11) K/U T/I
3. Briefly describe the main function of

(a) the digestive system. 12. Create and complete a table that lists and
(b) the brain. describes four technologies that are used to
(c) blood. (3.3, 3.4, 3.10) K/U diagnose or treat damage or disease of the human
body. Include a column to describe briefly how
4. List the main organs in the nervous system, each technology is used. (3.4, 3.6, 3.8, 3.10) K/U C
along with their functions. (3.10) K/U
13. Where do all of the different cells in our bodies

5. (a) Which type of muscle moves food through come from? In your answer, use the terms
the digestive tract? “stem cell,” “specialized tissue,” “differentiate,”
(b) Why is this type of muscle suitable for this “organ,” and “adult.” (3.1, 3.2) K/U
task? (3.3, 3.8) K/U
14. Use a concept map to link the four types of animal

6. (a) Name the system that provides support and tissues to the five organ systems described in this
structure for the body. chapter. (3.1, 3.3, 3.4, 3.6, 3.8, 3.10, 3.11) T/ I C
(b) What is another function of this system?

(c) Name the tissue types that make up this Solve a Problem
system. (3.1, 3.8, 3.11) K/U
15. Create a t-chart listing the pros and cons of

7. (a) Which system is responsible for transporting organ transplantation. (3.7) A C
nutrients to all parts of the body?

(b) What is the main organ in this system? 16. In sports, the illegal practice of “blood doping”
(3.4) K/U involves removing some blood cells from an
athlete about two weeks before competition and
storing them. Just before the competition, the
blood cells are injected back into the athlete.
Explain why this practice might give the athlete
an advantage. (3.4, 3.6) T/I

17. Your body is said to be in “homeostasis” Web Connections
when there is a healthy balance in its internal
25. There are other systems in the body, in addition
conditions and processes (body temperature,
to the seven covered in this chapter. One is
blood pressure, heart rate, breathing rate).
the immune system. Research how this system
Explain how the circulatory, respiratory,
works, what tissues are involved, and what an
digestive, and nervous systems contribute to
autoimmune disease is. Write a short magazine
homeostasis. (3.3, 3.4, 3.6, 3.10)K/U T /I
article summarizing your research. T/ I C
18. Your friend tells you that she has had special
26. Adipose tissue is a type of connective tissue
training that helps her hold her breath for long
that contains fat cells. At a certain stage of
periods of time. She claims that she can swim
development, individuals have essentially all
underwater for almost 30 minutes. What is your
of the fat cells they will ever have. Research the
reaction? Explain why. (3.6, 3.10) T /I
relationship between the number and size of fat

19. In a developing fetus, the mother’s blood cells and obesity. Report on the latest findings
provides all of the necessary nutrients and regarding attempts to prevent young people from
removes waste. Why, then, is it necessary for an developing obesity. T/I C A
expectant mother to pay careful attention to her

27. West Nile virus is a disease transmitted through
diet and lifestyle choices? (3.3, 3.4) A
blood. Find out how it is transmitted. How have

health authorities responded to the threat of
Create and Evaluate West Nile virus? What effect does this response
have on people’s lifestyles? Create a skit or video
20. What is DNA screening? Why might someone
to share your findings. T/I C A
choose not to use this technology? (3.10) K/U A
28. (a) Research ophthalmology. What system of the

21. Imagine that a drug company has developed a
body does it relate to? What types of imaging
new drug to treat coronary artery disease. What
technologies are used in ophthalmology?
ethical issues might arise if the company wants
(b) Create an illustrated poster to communicate
to run and fund its own trials of this drug?
your findings. T/I C
(3.4) A
29. What is transgenic research? Research this

22. Are there any “downsides” to the advances in
topic, including the discussions surrounding
diagnostic technologies? Explain. (3.4, 3.6, 3.8,
the ownership and use of the findings. Prepare
3.10) C A
a brief presentation in any format of your

choice. T/I C A
Reflect On Your Learning

30. Cloning animals is currently being explored for
23. Explain how your understanding of your body use in agriculture and medical research.
as “a system of interdependent systems” has (a) Research the cloning techniques of nuclear
changed as a result of studying this chapter. transfer or embryo splitting. Investigate the
24. In this chapter, you have learned about many arguments of people who support cloning
medical technologies and developments. and those who oppose it. Assemble your
arguments to identify the main issues.
(a) What did you think about medical
(b) Decide on your position regarding the
technologies before reading about them in
cloning of agricultural animals. Write a
this chapter?
one-page report that states your position and
(b) How has your understanding of medical
explains your rationale. T/I C A
technologies changed?

CHAPTER
SELF-QUIZ
3
the sentence.
1. Which tissue type covers and protects the human
body? (3.1) K/U 7. The _____________ nervous system is made
(a) connective up of the brain and spinal cord, and the
(b) nerve _____________ nervous system is made up of
(c) muscle nerves that connect the rest of the body to the
(d) epithelial brain and spinal cord. (3.10) K/U
2. Which organ systems work together to absorb 8. The exchange of oxygen and carbon dioxide
nutrients from food? (3.1–3.11) K/U
between the blood and the lungs occurs in tiny
sacs called _____________. (3.6) K/U
(a) musculoskeletal system and digestive system
(b) nervous system and circulatory system
(c) digestive system and circulatory system Match each term on the left with the most appropriate
(d) respiratory system and musculoskeletal description on the right.
system 9. (a) epithelial tissue (i) cells that can
(b) connective differentiate to form
3. The cells that carry oxygen are
tissue specialized cells
(a) white blood cells. (c) muscle tissue (ii) cells that can contract
(b) red blood cells. (d) nerve tissue to move bones
(c) platelets. (e) stem cells (iii) cells arranged in thin
(d) plasma. (3.4) K/U
sheets to cover surfaces
4. Which of the following statements about organ (iv) long, thin cells that
donation and organ transplants is true? (3.7) K/U conduct electrical
impulses
(a) The recipient of an organ donation is the
(v) various types of cells
only person who benefits.
that provide support or
(b) Doctors are not sure how to minimize the
insulation (3.1, 3.2) K/U
risk of organ transplant rejection.
(c) Organ transplants from deceased donors are
more common than from living donors. Write a short answer to each of these questions.
(d) The person who has been waiting the longest 10. Name two systems that interact with the
automatically receives the first available circulatory system. (3.3–3.11) K/U
organ.
11. Explain how the musculoskeletal system carries
out each of the following functions:
Indicate whether each of the statements is TRUE or FALSE.
If you think the statement is false, rewrite it to make it true. (a) support
(b) protection
5. The process of digestion begins in the stomach.
(c) movement (3.8) K/U
(3.3) K/U
12. Which of the following terms does not belong

6. All tissues are able to regenerate themselves.
with the others? Explain your answer.
(3.2) K/U
esophagus, stomach, small intestine, lungs
(3.3, 3.6) K/U

13. (a) What is a neuron? 20. Write a letter to a female friend about
(b) How does the structure of a neuron help it to osteoporosis and its consequences. In the letter,
carry out its function? (3.10) K/U explain how the proper diet and exercise regimen
can help to prevent osteoporosis. (3.8) C
14. Write a paragraph describing the passage of a slice

of pizza through the digestive tract. (3.3) K/U C 21. Surface area is a term used to describe how
much exposed area an object has. (3.6) T/I
15. Copy Table 1 into your notebook. Complete your

(a) In situations where materials need to be
table with information about each disease and the
transported across surfaces, what is the
system or systems involved. (3.3, 3.4, 3.8, 3.10) K/U
advantage of having a large surface area for
Table 1 Diseases and Systems transport?
Description of System(s) (b) In the lining of the small intestine, there
Disease the disease involved are thousands of little projections called
osteoporosis microvilli that provide a large surface area
for nutrients to diffuse into the bloodstream.
diabetes
Name another place in the body where
coronary artery disease increased surface area helps the transfer of
multiple sclerosis
materials.
22. Many hospitals have their own cord blood
16. Explain how the structure of each blood vessel donation programs. When women give birth,
suits its function. (3.4) T/I they can choose to donate the cord blood to the
(a) arteries hospital. The hospital stores the blood and keeps it
(b) veins available for patients needing transplants. Imagine
(c) capillaries that you are responsible for talking to pregnant
women about this program. How could you
17. Imagine that doctors identified a disease that convince them that it is a good idea? (3.2) C
causes the smooth muscles in the human body

to stop working. What consequences would this 23. (a) Describe how the muscle tissue and the
disease have for the person suffering from it? nerve tissue work together to control the
(3.3, 3.4) T/I respiratory system.
(b) What parts do connective tissues and
18. A person who takes many rapid, deep breaths
epithelial tissues play in the respiratory
may become dizzy. (3.4) T/I A
system? (3.11) T/I
(a) What has happened to the balance of

oxygen and carbon dioxide in the person’s
bloodstream?
(b) Why is breathing into a paper bag sometimes
recommended during a situation like this?
19. As you travel to higher altitudes, the
concentration of gases in the air, including
oxygen, decreases. (3.6, 3.10) T/I A
(a) What effect does this environment have on

your breathing?
(b) How might a runner who trained at sea level
perform in a race taking place at 2 000 m
above sea level? Explain.

CHAPTER
4 Plant Systems
KEY QUESTION: How do plants use the processes

of cell division and differentiation to grow?
A water lily, like other plants, has a hierarchy of structures that

perform various functions.
120 Chapter 4 • Plant Systems NEL

UNIT B
Tissues, Organs,
and Systems of
Living Things

Division, and Cell
Specialization
KEY CONCEPTS
Plants have a shoot The organization of tissues, Plants have dermal,

system and a root organs, and systems is vascular, and ground
system. different in plants to that tissue systems.
in animals.
Scientists can change the Plant tissue systems Meristems determine the
genetic makeup of plants. interact to perform pattern of plant growth.
complex tasks.

ENGAGE IN
SCIENCE
How would you answer if asked to explain why plants

are important to us? Most people would reply that
plants are important because they produce oxygen and
make food. Others might mention how plants influence Processing chicle sap into
the climate and provide habitats for many other living gum—the traditional way
things. Few people, however, understand just how
important plants are in our daily lives.
We eat plants. This is our most direct use of plant But what about non-food uses? Without wood from
tissues. Three of the most widely consumed food plants trees, this book would not exist and most homes would
are the seeds of types of grass: wheat, rice, and corn. Of collapse. If the soft fibres from cotton seeds suddenly
course, we also eat potatoes, lettuce, apples, peanuts, disappeared, most people on Earth would have no clothes.
olive oil, and soy sauce. All of these food basics come How do you use plants? Consider favourite or
from plants. Luxury plant foods include chocolate, chicle unusual foods, musical instruments, sports equipment,
(tree sap used to make chewing gum), and coffee. and works of art. Try to write a “top 10 list” of the most
Coffee beans are second only to petroleum in total dollar unusual or most important uses of plants.
trading value.
A lot of wood goes into the

construction of the average
Canadian house.

WHAT DO YOU
THINK?
1 Plants have organs, just like animals.

Agree/disagree?
4 Plants have a circulatory system.
Agree/disagree?
2 Respiration is the same as breathing.

Agree/disagree?
5 Cell division occurs in all parts of a plant.
Agree/disagree?
plants grow from seeds.
6 Plants use water in the process of photosynthesis.
Agree/disagree?

FOCUS ON
READING
Asking Questions
You can ask yourself questions about a text before reading to think about
what you already know about the topic, during reading to work out what
a text means, and after reading to think critically. You can ask and answer
three types of questions:
• Literal (“On the Lines”): These questions are about information directly
stated on the page.
reaDing Tip
• Inferential (“Between the Lines”): These questions require that you
connect information in the text with information you already know.
you develop literacy strategies. • Evaluative (“Beyond the Lines”): These questions ask you to make a
judgment based on evidence from the text.
For the Love of Plants

Scientists are actively engaged in restoring a large wetland called Cootes
Paradise at RBG (Figure 1). They are interested in how a habitat changes
over time. They also conduct research on invasive species that come
from other countries and damage Canadian ecosystems. RBG works
with many other conservation organizations, including McMaster
University and Environment Canada. Their aim is to preserve Canada’s
Figure 1 Cootes Paradise is a valuable
native plant species, wild habitats, and ecosystems.
wetland at Royal Botanical Gardens.
It is part of Hamilton Harbour.
Asking Questions in Action

Asking questions before, during, and after reading can help you
understand the text. Asking questions helps you focus on what you
already know, find factual information, make inferences and form opinions.
Here’s how one student asked questions to understand the text:
Questions I asked before, during,

and after reading the text How that question helps me understand the text
Literal: What is RBG? the caption for Figure 1 helps me understand that
RBG stands for Royal Botanical Gardens
Inferential: Why do scientists want helps me understand that scientists do research to

to study how a habitat changes? figure out how they can improve the environment
Evaluative: How does this text helps me form an opinion about the importance of
compare with other texts? restoring wetlands because I saw a documentary
about how salt water from Hurricane Katrina
destroyed vegetation in marshes

Systems in Plants 4.1
Plants—including mosses, ferns, conifers, and flowering plants—are
multicellular organisms. Plants have two obvious distinguishing features:
they are typically green in colour, and they cannot move from place to place.
DID YOU KNOW?
Their green colour is caused by chlorophyll—a chemical that plants use to
Canadian Researcher
photosynthesize. They all have structures—usually roots—to anchor them Approximately 75 % of modern
firmly in one place. These two features have a profound influence on the medicines come from plants.
overall structure and functioning of plants. Dr. Memory Lewis studies the
In this chapter we will focus on the structures in flowering plants. Other medicines used by native peoples
in South America. Her research into
plants, such as mosses, ferns, and coniferous trees, have different structures.
traditional medicines has uncovered
Figure 1 illustrates the main features in a flowering plant. The plant body a tree sap that speeds up healing
is divided into two main “ body systems.” This contrasts strikingly with of wounds. Another plant contains
animals, which are made up of many systems. compounds used to treat malaria,
which affects millions of people
worldwide. There is still much to be
flower
discovered about traditional plant
medicines. Unfortunately, tropical
jungles are being cut down for
agriculture, and many plant species
leaf are disappearing before they can be
properly studied.
shoot system
fruit
main stem
root system
Figure 1 A typical flowering plant has two body systems: the root system and the shoot system.
C04-F01-UAOS10SB
Plants perform photosynthesis to make their own food. This means that
they do not need to move around in search of food. As a direct consequence,
they have no need for the complex and coordinated organ systems found in
animals. A plant does not require a digestive or a musculoskeletal system,
or a nervous system, to sense its surroundings and coordinate movements.
However, plants do have to perform many of the same functions as animals.
• Plants needs to exchange gases with their surroundings.
• They require an internal transportation system to move water
and nutrients around within their bodies.
• They must
C04-F01-UAOS10SB have a way of reproducing.
Ann Sanderson
NEL 4.1 Systems in Plants 125

final
We will now look at the organization of plant bodies and the terminology
used to describe them. Because plants are so dramatically different from animals,
scientists do not apply the same terminology for describing the hierarchy of
organization in the plant body.
Hierarchy of Organization in the Plant Body

As Figure 1 on the previous page shows, the flowering plant body has two
main body systems: the root system and the shoot system. For simplicity,
scientists often just refer to them as the root and the shoot. These systems
Learning Tip
consist of a number of structures.
Systems in Plants
The root system is made up of one or more separate roots, whereas the
Plant terminology can be confusing.
shoot system consists of the stem, leaves, and flowers (when present). Although
Plants are described as having
two body systems and three tissue
roots, stems, leaves, and flowers are sometimes referred to as plant “organs,”
systems. Scientists sometimes use the scientists rarely use this terminology. They generally refer simply to plant parts.
term “organ” but not the term “organ Plant parts are made up of a wide variety of specialized cells. As in animals,
system” when describing plants. groups of similar specialized cells are called tissues. In addition to the plant’s
two main body systems, scientists also refer to their tissues as belonging to
dermal tissue system the tissues separate systems. There are three main types of plant tissue systems: the dermal
covering the outer surface of the plant tissue system, the vascular tissue system, and the ground tissue system. The
vascular tissue system the tissues dermal tissue system is made up of tissues that form the outer surfaces of
responsible for conducting materials plant parts. The vascular tissue system is made up of tissues specialized for the
within a plant transportation of water, minerals, and nutrients throughout the plant. The tissues
ground tissue system all plant tissues in the ground tissue system make up all of the other structures within a plant.
other than those that make up the dermal You will learn about these tissue systems in more detail in the next section.
and vascular tissue systems
root system the system in a flowering The Root System

plant, fern, or conifer that anchors the The root system is the part of the plant that typically grows below ground.
plant, absorbs water and minerals, and
stores food
The root system anchors the plant, absorbs water and minerals from the soil,
and stores food (Figure 2). Most of the water and minerals obtained by the
plant are absorbed by root hairs: fine extensions of dermal tissue cells.
A plant’s root system can spread underground to cover a very large area.
Some roots even appear above ground or above water (Figure 3(a) and (b)).
Other roots, such as radishes and carrots, are specialized for nutrient storage
(Figure 3(c)). Different types of plants have tremendous variation in their
tissues and organs according to the environment in which they live.
Roots have long been a useful source of foods (sweet potatoes, carrots,
Figure 2 Roots spread down into the sugar beet), flavourings (liquorice, ginger), fibres (used in basketry), and a
soil to anchor the plant and collect water. variety of natural remedies.
(a) (b) (c)

Figure 3 (a) This banyan tree has aerial roots that grow downward from its branches to anchor and
support the tree. (b) Some plants have specialized root extensions that grow up out of the water to
obtain oxygen for the root cells below. (c) Carrot roots store food for the plant.
The Shoot System
The shoot system is the system that is specialized for two main functions: to shoot system the system in a flowering
conduct photosynthesis and to produce flowers for sexual reproduction. The plant that is specialized to conduct
photosynthesis and reproduce sexually;
shoot systems of flowering plants are made up of three parts—the leaf, the
it consists of the leaf, the flower, and
flower, and the stem—which all have distinctive functions. the stem
Let us look at the parts of the shoot system in detail.
The Leaf
The leaf is the main photosynthetic structure of the plant. In photosynthesis,
tissues in the leaf use carbon dioxide, water, and light energy to produce
glucose (a form of sugar) and oxygen. The glucose is used for plant growth,
cellular respiration, and energy storage.
chlorophyll
light energy + carbon dioxide + water glucose + oxygen
The cell structure that actually performs photosynthesis is an organelle
called a chloroplast. (You learned in Section 2.1 that chloroplasts are
organelles that occur in plant cells but not in animal cells.) Chloroplasts
contain flat, disc-like structures called thylakoids. Thylakoids are arranged
in stacks called grana. These stacks act as solar collectors, using chlorophyll
in the membranes of thylakoids (Figure 4).
Some leaves are also adapted for support, protection, reproduction, and Figure 4 This light micrograph
(magnification 12 000X) shows two
attraction. Figure 5(a) shows leaves that are specialized to provide support. chloroplasts (dark green) within a plant
Can you recognize the leaves of the plant in Figure 5(b) and what appear to leaf cell. The grana appear light yellow
be flower petals of the plant in Figure 5(c)? in this picture.
We use leaves in a variety of ways. Many are edible, such as lettuce,
spinach, onion, tea, and herbs. Others are sources of waxes and medicines. In
the agriculture industry, leaves are a major source of nutrition for livestock.
You will have a chance to examine leaves in greater detail in Section 4.4.
(a) (b) (c)
Figure 5 (a) The tendrils on this cucumber plant are modified leaves that help support the growing
plant. (b) The sharp spines on this cactus are actually modified leaves that protect the plant from
herbivorous animals. (c) Some poinsettia leaves are red, but these are not part of the flower. The reaDing Tip
true flower consists of the yellow-green parts in the centre of the red leafy region. Asking Questions
Sometimes information in a text makes
The Flower you ask an evaluative question. For
Flowers are specialized structures developed for sexual reproduction. example, you might wonder about plants
They contain male or female reproductive structures, or sometimes both. that are pollinated by the wind and ask,
“If there is little wind when the pollen
Male reproductive structures produce pollen grains; female reproductive
is ready to be spread, will grasses and
structures produce eggs. Eggs are fertilized by pollen. After pollination, trees not be pollinated that year?” Your
the female flower parts form seeds. In most flowering plants, the seeds are evaluative question might prompt you to
contained within a specialized structure called a fruit. conduct further research on the issue.
NEL 4.1 Systems in Plants 127
Pollination occurs with the help of wind or animals. Flowering plants
such as grasses and many common tree species are wind pollinated.
The flowers are small and drab but produce large amounts of pollen
(Figure 6(a)). In contrast, other flowering plants are pollinated by animals,
such as insects, bats, and birds. These plants often have large, colourful, and
fragrant flowers to attract their would-be pollinators (Figure 6(b)). Most also
(a)
produce nectar as an added form of attraction.
Flowers, and the seeds and fruits that come from them, are very
important sources of food and flavourings. Rice, wheat, corn, vanilla,
chocolate, coffee, bananas, apples, mangos, cotton, and even some medicines
all originate from flowers.
Mosses, ferns, and coniferous trees are not flowering plants. They have
different sexual reproductive systems. Conifers are all wind pollinated and,
(b) instead of having flowers, produce pollen and seeds in specialized cones.
Figure 6 (a) Grasses rely on wind for In this chapter we will concentrate on flowering plants.
pollination. (b) Other plants produce
nectar and colourful flowers to attract The Stem
insects that help with pollination. The flowering plant stem (or trunk, in the case of trees) has several
functions. It supports the branches, leaves, and flowers and provides a way
to transport materials. The stem contains significant amounts of vascular
tissue for carrying substances to and from roots, leaves, flowers, and fruits
(Figure 7).
Some stems are specialized for food storage, protection, photosynthesis,
and reproduction. Plant stems provide us with sugar cane, potatoes, wood
and paper products, cork, linen, and a variety of medicines.
Figure 7 Cross-section through a
sunflower stem. The brownish clusters
of cells are the plant’s transportation
system.
in SUMMARY
• Flowering plants have two body systems: the root • The two main functions of the shoot system of
system and the shoot system. flowering plants are to conduct photosynthesis
• The function of the root system is to anchor the and produce flowers for sexual reproduction.
plant, absorb water and minerals from the soil, • Leaves are mainly responsible for photosynthesis.
and store food. • The various parts of plants work together to
• The shoot system of flowering plants is made up perform all of the functions necessary to keep
of the stem, leaves, and flowers (when present). the plant alive.
CHECK YOUr Learning

1. What is the hierarchy of structures in plants? K/U 4. Compare the functions of the leaf and the stem in plants. K/U
2. (a) What are the two main differences between plants and 5. Compare the functions of the stem and the root in plants. K/U
animals? 6. (a) Describe the primary function of a flower.
(b) How do these differences suggest the need or lack of (b) Describe two ways in which different plants carry out this
need for various organ systems? K/U function. K/U
3. Name the three tissue types in plants and briefly describe 7. How can roots, stems, and leaves all be involved in food
them. K/U storage? Give examples in your answer. T/I
Plant Tissue Systems 4.2
Plant tissues are classified into three tissue systems. Each tissue includes
a variety of specialized cell types that enable them to carry out specific
functions within the plant body. As you will learn, some cells are specialized
to perform photosynthesis just below the surface of leaves, whereas others
are specialized to absorb water. Some specialized plant cells even act as
doors, literally opening and closing to control the entry and exit of gases!
Just as in animals, these specialized cells develop from unspecialized cells
during the process of cellular differentiation.
Cellular Differentiation and DID YOU KNOW?

Specialization in Plants Clean as a Lotus Leaf
The surfaces of some plants are
When a seed starts to grow, the cells divide very quickly. As the seed develops of great interest to scientists and
into an embryo, many of the cells start to differentiate into specific tissues engineers. The leaves of the lotus plant
(Figure 1). The regions of growth are located at the tips of the plant’s roots have slippery surfaces that materials
and shoots. Plants with woody stems, such as trees, also have a region of simply cannot stick to. As a result, they
are always extremely clean. Engineers
growth just below the surface of their stems. Plant growth occurs because
are trying to learn how to use this
undifferentiated cells are actively growing and dividing in these regions. As living lotus technology on solar panels
these new cells mature, some of them specialize and develop different features and other exposed surfaces so they
according to their location and future function. For example, cells in leaves are never need cleaning.
very different from those in the roots and stem of the plant.
Meristematic Cells
Just as animals contain some unspecialized cells called stem cells, plants meristematic cell an undifferentiated
have unspecialized cells that are called meristematic cells. Meristematic cells plant cell that can divide and differentiate
can differentiate into specialized tissue types (Figure 2). to form specialized cells
Figure 1 A germinating runner bean seed, showing the Figure 2 There are regions in all plant roots and stems, near the
shoot and root tips where rapid growth occurs, that contain meristematic cells.
NEL 4.2 Plant Tissue Systems 129
Think back to Activity 2.6, in which you looked at the phases of mitosis in
plant and animal cells. The plant cells you examined were from the meristem
region in an onion root tip. The meristematic cells in this region divide and
differentiate into specialized tissues in the roots. Similarly, the tissues of new
stalks, leaves, and flowers arise from meristem regions in the shoot. As cells
in the meristem regions continue to divide, some of the new cells always
remain in the undifferentiated state.
Tissue Systems in Plants

reaDing Tip As you learned in Section 4.1, plants have three major tissue systems:
Asking Questions dermal, ground, and vascular. Each of these three tissue systems contains
Use sticky notes while reading to record different types of specialized cells. As you can see in Figure 3, the tissues
your questions beside the part of the of the three systems are found in all parts of the body and have a distinct
text you find confusing. After reading
arrangement. The dermal tissues cover the entire outer surface of the
you can check to see if the rest of
the selection, including the graphs,
plant but do not occur within the plant. The vascular tissues are found
illustrations, and captions, answered within every root, shoot, and leaf of the plant. The vascular tissue system
your questions. is continuous, so all plant parts are joined together by vascular tissues.
The ground tissues account for all other internal tissues in the root, stem,
and leaves.
dermal tissues
vascular tissues
ground tissues
dermal tissues
vascular tissues
ground tissues
dermal tissues
vascular tissues
ground tissues
Figure 3 General arrangement of plant

tissues. The vascular tissues are shown
in red, the dermal tissues in green, and
the ground tissues in light blue.
UAOS10SB
130 Unit
Chapter 4 • Plant Systems
A Biology NEL
Dermal Tissue System
The dermal tissue system forms the outermost layer of a plant. The dermal
tissue system includes both epidermal and periderm tissues. Epidermal epidermal tissue (epidermis) a thin
tissue (epidermis) is a thin layer of cells that covers the surfaces of leaves, layer of cells covering all non-woody
surfaces of the plant
stems, and roots. In woody plants, the epidermal tissue is replaced by
periderm tissue that forms bark on stems and large roots. periderm tissue tissue on the surface
The cells of the dermal tissue system are specialized to perform a wide of a plant that produces bark on stems
and roots
variety of unique functions. Some epidermal root cells have long extensions
called root hairs to help absorb water and minerals from the surrounding
DID YOU KNOW?
soil. Most epidermal leaf cells produce a layer of wax, called the cuticle, that
helps waterproof the leaf ’s surface (Figure 4). Some epidermal leaf cells are Dental Hygiene and the Rainforest
Chewing sticks are used by many
adapted for defence: they have hairlike structures that contain chemical people instead of toothbrushes. The
irritants. Anyone who has experienced the discomfort of touching a plant neem tree grows in many Asian,
called stinging nettle knows just how irritating it can be (Figure 5). African, and Middle Eastern countries.
Indigenous people in these areas know
that chewing neem twigs is good for
their teeth. The epidermal tissues
contain chemicals that kill bacteria
and reduce inflammation. The study
of how indigenous (native) plants are
used by different cultures is known as
ethnobotany.
Figure 4 The wax produced by the epidermis Figure 5 Fine hairlike structures on this
keeps a plant from losing too much water. It stinging nettle leaf inject an irritating
can also be harvested and used by humans. chemical into the skin of any curious animal.
Carnauba wax, from the carnauba palm tree, is This adaptation helps protect the plant from
the hardest known wax. being eaten.
Vascular Tissue System

A plant must obtain from the soil all the water and minerals that it needs for
growth. These substances are absorbed by the plant’s roots. The water and
nutrients then have to be distributed to all of the plant’s cells. In addition,
plants must be able to distribute the sugars and other chemicals, produced
during photosynthesis, to all of its parts. The plant’s vascular tissue system is
the transportation system that moves water, minerals, and other chemicals
around the plant. It is like a network of tubes that reaches from the roots,
up the stalk, and through the leaves. As the plant grows, new vascular
tissues differentiate in the growing tips of the plant. The new tissues are
lined up with existing vascular tissues, maintaining the tubes’ connections
throughout the plant.

xylem vascular tissue in plants that There are two types of vascular tissue: xylem and phloem. Xylem
transports water and dissolved minerals (pronounced zye-luhm) is made up of elongated cells. Xylem transports
from the roots to the leaves and stems of
water and dissolved minerals upward from the roots. This solution travels
the plant
along an interconnected network to the stems and leaves.
Once they are fully formed, xylem cells are little more than hollow tubes
with rigid walls (Figure 6). They have no cytoplasm, nucleus, or other
organelles. This allows water to move easily through the tubes. Mature
xylem cells are no longer living tissue.
phloem vascular tissue in plants that Phloem (pronounced flo-uhm) is a specialized tissue that transports
transports dissolved food materials and solutions of sugars produced by photosynthesis. Phloem also transports
hormones throughout the plant
other dissolved nutrients and hormones throughout the plant. Under
certain conditions, food materials are transported downward from the
photosynthesizing leaves to the stem and roots. Under other conditions,
the food materials are carried upward from the root and stem to the leaves.
Phloem is made up of elongated cells that, unlike xylem cells, are alive when
mature and functioning.
Figure 6 (a) In xylem tissue, water

carries dissolved minerals upward
from the root to the shoot through
dead, hollow cells. (b) In phloem tissue,
dissolved sugar and other nutrients
(a) (b)
are moved around the plant through
living cells. Xylem Phloem
The arrangement of vascular tissues within the stems of plants differs

dramatically between woody and non-woody plants. In non-woody plants,
To see more examples of the vascular tissues are arranged in bundles and accompanied by ground
arrangements of vascular tissues, tissues (Figure 7). You will find out about the unique arrangement and
C04-F03-UAOS10SB
GO TO NELSON SCIENCE growth of vascular tissues in woody plants in Section 4.6.
epidermis
UAOS10SB phloem
Unit A Biology
Figure Number C04-F03-UAOS10SB

Artist Ann Sanderson xylem
Figure 7 Vascular tissues in the stems
of non-woody plants are arranged in
Pass 3rd pass
bundles.
Approved
Not Approved
C04-F09-UAOS10SB
All plants and animals use sugars to provide the energy necessary for cell
processes. This is called cellular respiration, and requires oxygen. Unlike
animals, however, most plant tissues do not need a special supply of oxygen.
Leaves produce their own oxygen during photosynthesis. Most stem and
root tissues get enough oxygen by diffusion from the surrounding air and air
spaces in the soil. One exception to this is the water lily (see page 120). This
plant actually pumps oxygen from leaves floating on the surface of the water
down through vascular tissues to supply the roots buried in the mud.
Ground Tissue System

Most of the cells of young plants are ground tissue cells. Ground tissues
are the filler between the dermal and the vascular tissues. Ground tissues
perform a variety of functions: in the green parts of the plant, they
manufacture nutrients by the process of photosynthesis; in the roots, they
store carbohydrates; and in the stems, they provide storage and support.
You will explore some of the functions of specialized ground tissues when
you examine the leaf in more detail in Activity 4.5.
RESEARCH THIS WHen PLanTS geT SiCK

SKILLS: Defining the Issue, Researching, Identifying Alternatives SKILLS HANDBOOK
4.A., 4.C.
Plants, like all living things, are subject to a wide variety of 2. Select a plant disease and research answers to the following
diseases. Plant diseases can kill or injure a plant, reducing questions.
its value in a number of ways. Injured or dying plants may • What is the cause of the disease?
have less economic value, less aesthetic value, or less • How does the disease affect the plant?
ecological value. • How does the disease affect the economic, aesthetic, and/or
ecological value of the plant?
GO TO NELSON SCIENCE • How can the disease be controlled, prevented, and/or treated?
A. Present your findings in an informative and creative way. You
1. Find out the meanings of the terms “economic value,” could make a brochure, audiovisual presentation, or a public
“aesthetic value,” and “ecological value.” information “news story” video about the disease. T/I C A
in SUMMARY
• Meristematic cells are undifferentiated plant cells • Plants have three tissue systems: dermal, vascular,
that can form any kind of specialized tissue. and ground.
• Meristematic cells are located at the tips of roots • Xylem and phloem are vascular tissues that are
and shoots and in the stems of woody plants. responsible for transporting water, minerals,
hormones, and nutrients within the plant.
CHECK YOUr Learning

1. What is the purpose of cell division in plants? K/U 4. Give some examples to show how specialized plant cells
2. What are the main functions of the three plant tissue perform specific functions. K/U
systems? K/U 5. Explain why it is important for plant leaves to be
3. Compare the structure and function of xylem and waterproof. K/U
phloem. K/U 6. Explain why the movement of water and minerals in xylem
is always upward. K/U
4.3 EXPLORE AN ISSUE CRITICALLY
Transgenic Plant Products SKILLS MENU

We use plants in many different ways. On the most Identifying Communicating
basic level, we need plants to produce food and Alternatives Evaluating
oxygen and to remove carbon dioxide from the air. Analyzing the Issue
We rely on plants to maintain the right conditions on

Earth for us to survive. We also need them to provide Genetic engineering is a technology in which
the wood pulp for our textbooks, the timber used to genetic material is taken from one organism and
build our homes, the cotton in our clothing, and even inserted into the genetic material of a different
many of the medicines we use. organism. For example, DNA might be taken from
Humans have always harvested the natural a fish and introduced into a plant. This transplanted
products of plants. A few thousand years ago, humans genetic material contains the information needed to
began selecting which plants they grew, choosing produce substances normally made by the original
the strongest, the most drought-resistant, or those organism. The aim is that the new “transgenic”
that produced the sweetest fruit or the most grains plant will use this genetic information to produce
(Figure 1). Over the centuries, this artificial selection the desired compound (Figure 2). Organisms that
has changed the plants. Modern apples, for example, contain DNA from other species are sometimes called
are much bigger and sweeter than the apples that genetically modified organisms: GMOs.
grew wild thousands of years ago. Until very recently,
plants only produced their own naturally occurring
sugars and chemicals. Now, however, with the aid of
genetic engineering, we can use plants to produce
substances that are normally found in entirely
different organisms.
Figure 2 Because this plant contains some genetic

information from a firefly, it is able to produce GFP (green
fluorescent protein). The protein glows and helps scientists
Figure 1 By selecting and growing seeds from the best plants,
uncover the inner workings of plant cells.
humans have gradually changed how the plants grow. Corn has been
bred selectively for thousands of years.

Research scientists are working on a wide range of Goal
transgenic modifications. The research may produce To assess the potential risks and benefits of one
plants that: type of transgenic plant and prepare a set of
• are resistant to pests, diseases, and adverse recommendations based on your findings.
growing conditions such as drought or frost
• manufacture vaccines and other valuable
Gather Information
SKILLS HANDBOOK
4.A., 4.B.
medicines
• have greater nutritional value Use the library and online resources to gather
• are able to absorb more carbon dioxide from information on the possible uses of transgenic plants.
the air Choose a specific transgenic plant that interests you.
• manufacture valuable biological materials such Research to find out what organism the transplanted
as spider web protein DNA was taken from. How might the transgenic
We already grow transgenic plants in Canada plant benefit people and the environment? What are
(Figure 3). There are several varieties of crop plants the possible risks of growing this transgenic plant?
(such as corn, soybeans, and canola) that have What should farmers consider if they are thinking
been modified to make them resistant to certain of growing this plant? As you collect information,
herbicides. This allows the farmer to spray the entire evaluate its reliability and bias.
field with a chemical that will kill all the weeds but GO TO NELSON SCIENCE
leave the crop plants unharmed.
reaDing Tip
Asking Questions
Sometimes missing information in a text makes you ask an
inferential question. For example, you might wonder about
whether transplanting DNA from a fish to a plant is safe. The text
does not say that genetic engineering is foolproof. But you have
read an article about possible negative consequences of genetic
engineering. By combining what the text does not say with what
you already know, you end up asking an inferential question.
SKILLS HANDBOOK
Figure 3 A field of transgenic canola
Identify Solutions 4.C.
Other plants (such as corn and potatoes) have Consider the challenges and risks associated with
been given bacterial DNA that kills caterpillars. This developing the transgenic plant you selected. Identify
reduces the need for pesticides, thus saving farmers possible ways of overcoming these challenges and
money and reducing the quantity of pesticides added reducing or eliminating these risks.
to the environment.
Make a Decision
The Issue Prepare a set of recommendations regarding your
The creation of transgenic plants is controversial. chosen plant. Should this plant be approved for use?
Many people believe that genetically engineered If so, should there be any regulations on how, when,
plants could alter the natural ecology of the planet. or where it is grown? Who should establish the
Others argue that this technology has the potential to regulations?
provide huge benefits to society and the environment.
Communicate
Discuss your presentation options with your teacher.
Present your recommendations to the class.

4.4 Tissues Working Together
The leaves of most plants are highly specialized structures with one primary
reaDing Tip function: performing photosynthesis. In this section, we will consider what
Asking Questions
leaves need to photosynthesize. You will look at the various ways in which the
If you do not understand something tissue systems of the leaf work together to perform this vital function.
while reading a text, stop and try to Photosynthesis is the process that enables plants to build glucose from
ask yourself a question about it. Try simple molecules using light energy, usually sunlight. Let us begin by
rereading the previous sentence to see
reviewing the process of photosynthesis. The word equation for this reaction is
if you missed some information that chlorophyll
might answer your question. Another light energy + carbon dioxide + water glucose + oxygen
strategy is to continue reading to
see if the information in the next few This equation tells us that the leaf uses light energy, carbon dioxide,
sentences or paragraphs answers your and water to produce glucose and oxygen. Glucose can then be converted
question. into other carbohydrates, including complex sugars, in the leaf. These
carbohydrates in the form of starch are used as a source of stored chemical
energy. Alternatively, the plant can use them as the basic building blocks for
all of the complex chemicals and structures that it needs to make.
Sugar is a valuable product needed by all parts of the plant. The plant
therefore has to have some system to transfer sugars from the leaf to the
rest of the plant. Both glucose (a form of sugar) and oxygen are required in
all plant cells for cellular respiration. (Recall that cellular respiraton is the
release of energy from glucose.) However, leaves produce more oxygen than
the plant needs, so excess oxygen is released as a waste product.
Let’s examine in more detail how plants obtain the three factors required
for photosynthesis: energy (sunlight), carbon dioxide, and water.
Absorbing Light
As you know, most leaves are green and thin (Figure 1). Both of these
features are ideal for absorbing light. Wide, thin leaves have a much greater
surface area than thick, narrow leaves. This enables them to absorb more
light and accounts for why this leaf shape is extremely common. The green
colour is produced by chlorophyll—the pigment that actually absorbs light
to begin the process of photosynthesis.
(a) (b)
Figure 1 (a) This plant is sometimes called the “poor man’s umbrella.” It grows in the rainforests of
Panama. (b) The leaves of the Victoria water lily are well over a metre in diameter.
As you learned in Section 4.1, chlorophyll is contained in cell organelles
called chloroplasts. It is these organelles that actually conduct the chemical
process of photosynthesis. In a typical leaf (Figure 2), the chloroplasts
are located mostly in the palisade layer and the spongy mesophyll. The palisade layer a layer of tall, closely
palisade cells are located where there is the maximum amount of light: packed cells containing chloroplasts, just
below the upper surface of a leaf; a type
just below the leaf ’s upper surface. Spongy mesophyll cells are located
of ground tissue
throughout the interior of the leaf. The palisade and spongy mesophyll cells
are part of the ground tissue system. You may have noticed in Figure 2 that spongy mesophyll a region of loosely
packed cells containing chloroplasts, in the
the palisade cells are packed closely together, whereas the spongy mesophyll
middle of a leaf; a type of ground tissue
cells are more loosely packed. The close packing helps palisade cells capture
as much incoming light as possible, whereas the spaces between the spongy
mesophyll cells permit gases to move around within the leaf. All of these
photosynthesizing cells require a supply of carbon dioxide and water.
vascular
upper epidermis bundle
chloroplasts
cuticle
palisade
layer
spongy
mesophyll
carbon dioxide
air space
oxygen
lower epidermis stomate water vapour
guard cells liquid water
Figure 2 The specialized tissues and cells in a leaf
Obtaining Carbon Dioxide

How does carbon dioxide enter leaves? Carbon dioxide gas is present in the cuticle a layer of wax on the upper and
C04-F04-UAOS10SB
atmosphere in low concentrations. As you can see in Figure 2, the entire lower surfaces of a leaf that blocks the
upper and lower leaf surfaces are covered by a layer of epidermal tissue diffusion of water and gases
(epidermis). The cells that make up this tissue produce a thin layer of wax stomate (plural: stomata) an opening
called the cuticle. This waxy layer keeps the leaf from drying out. This same in the surface of a leaf that allows the
exchange of gases
cuticle also prevents gases from entering the leaf by direct diffusion through
the surface cells. Instead, gases enter and exit through special openings guard cell one of a pair of special cells
in the leaf surface called stomata (singular: stomate). These openings in the epidermis that surround and control
the opening and closing of each stomate
SB are surrounded and controlled by pairs of special epidermal guard cells
ology (Figure 3). The guard cells can either bend outward, causing stomata to
open, or they can collapse inward, causing stomata to close.
Number The majority of plants have most or all of their stomata in the lower
C04-F04-UAOS10SB
surface of the leaf. This location reduces water loss, provides more surface
Ann Sanderson
area for photosynthesis, and reduces the chances of airborne viruses,
bacteria,
final and fungal spores from entering the leaf.
ed Figure 3 Two stomata, each surrounded
proved by a pair of guard cells
NEL 4.4 Tissues Working Together 137

Once carbon dioxide enters the leaf through the stomata, it can move
around through the air spaces in the spongy mesophyll. This enables carbon
dioxide to more easily reach the photosynthetic cells within the leaf.
Controlling Stomata
When and why do plants open and close their stomata?
When stomata are open, carbon dioxide can enter the leaf and oxygen can
escape. This helps the plant photosynthesize. Ideally, plants would open their
stomata whenever it was sunny. However, when stomata are open, water
vapour can also escape. A very thin leaf could dry out and die very quickly
Learning Tip on a sunny or windy day. Preventing too much water loss is therefore a
Door Cells major concern for many plants.
It may help you to remember the Guard cells are an adaptation to help the plant conserve water by altering
roles of guard cells and stomata
their shape in response to water levels in the leaf. If there is a good supply
if you think about guard cells as
of water within the leaf, the guard cells expand and bend apart—opening
doors and stomata as doorways. You
walk through doorways just like gas the stomata. If there is a shortage of water, the guard cells become soft and
moves through stomata. You close collapse—closing the stomata. Guard cells also have a mechanism that
these openings with doors, like a leaf responds to light levels. This lets them close the stomata at night when
closes the openings with guard cells. carbon dioxide is not needed because there is no light for photosynthesis.
T RY THIS YOUr OWn gUarD CeLLS

SKILLS: Performing, Observing, Analyzing, Evaluating, Communicating SKILLS HANDBOOK
3.B.
In this activity you will make a model of guard cells to see how 4. Release some air from the balloons until the two balloons lie
they affect the size of the stomate. flat against one another.
Students who are allergic or sensitive to latex should avoid A. Complete two labelled diagrams of your balloons at Step 3
all contact with the balloons. and Step 4. C
Equipment and Materials: 2 long balloons; masking tape B. Which diagram represents two guard cells filled with water,
and which represents the guard cells with less water in
1. Partially inflate two long balloons. Hold the ends of the them? T/I
balloons shut.
C. What does the space between the balloons represent? T/I
2. Have a partner place several strips of tape lengthwise along

D. What effect does the masking tape have on the shape of the
one side of each balloon.
completely filled balloons? T/I
3. Blow some more air into each balloon. Hold the two balloons
E. The balloons are a model of the guard cells in a leaf. How
side by side, with the two taped portions facing one another.
good of a model are they? A
Obtaining Water
Leaves reduce water loss with a waxy cuticle and by closing their stomata
when water levels are low. How do leaves obtain water in the first place?
Vascular tissues made up of xylem and phloem are arranged as bundles
and run through the plant from root to leaf. Long, thin epidermal cells
on the roots, called root hairs, grow into the surrounding soil and absorb
water by the process of osmosis. The root hairs greatly increase the surface
available for water absorption, allowing the osmosis to happen very quickly.
The water is then transported by xylem from the roots, up the stem, and
through the leaves.

Comparing Plant and Animal Systems
Plants and animals are very different organisms. At the cellular level, epidermis cambium
however, there are similarities. Plant and animal cells both need to carry out phloem xylem
some of the same processes. Plants cells, like animals cells, respire. In this
process, they use oxygen to “burn” glucose, releasing its energy for other
chemical processes in the cells. As well as producing energy, this reaction
produces carbon dioxide and water.
In some ways, the fluid circulation systems in plants and animals are
similar. Vascular bundles are similar to the veins and arteries in animals
(Figure 4). There is one important difference, however. In animals, the blood
is actively pumped around the body by the heart; in plants, liquids move Vascular bundle
Figure 4 Vascular bundles transport
around passively. Plants have no organ equivalent to a heart. water and other substances around the
In Chapter 3, you learned how different animal organ systems work plant. They can be compared to veins
together to accomplish complex tasks. Table 1 compares how animal and and arteries in an animal.
C04-F10-UAOS10SB
plant systems accomplish a similar task.
Table 1 A Comparison of Animal and Plant Tissue Systems
Task Animal organ systems Plant tissue systems
Obtaining food • The nervous and musculoskeletal • The entry of necessary carbon
and transporting systems are involved with dioxide is controlled by cells in
it within the body obtaining food. the dermal tissue system.
• The digestive system processes • The ground tissue system in
food. leaves produces the plant’s own
• In the circulatory system, blood food (sugars).
vessels transport all digested • The vascular system transports
food nutrients. sugars and other complex
compounds in phloem.
in SUMMARY
• A plant leaf is made up of a system of tissues, • Special dermal cells known as guard cells
each with its own specific structure and function. surround and control each stomate in a leaf.
• Ground tissue in a leaf isUAOS10SB
largely responsible for • Both animal and plant cells use sugar and oxygen
photosynthesis and fills the
Unitspace between the
A Biology in the process of respiration.
dermal layers and the vascular tissues. • Animals and plants both possess systems that
• The leaf epidermis contains many
Figure tiny
Number C04-F10-UAOS10SB
openings must
work together to accomplish complex
Artist
called stomata, which allow In House Nesbitt
gas exchange and the tasks.
release of water vapour.
Pass 1st pass
CHECK YOUrApproved
Learning
Not Approved
1. (a) Do you find it confusing to compare plant structures 4. (a) In what ways do the cuticle and guard cells perform the
with animal structures? same function?
(b) Determine how your classmates feel about this (b) In what ways do their roles differ? K/U
comparison. 5. Compare the functions and arrangements of cells in the

(c) Discuss the matter as a class with your palisade and spongy mesophyll layers. K/U
teacher. K/U T/I C 6. How do the shape and colour of the leaves in Figure 1 on
2. Explain how each region of the leaf contributes to the task of page 136 help the leaf accomplish its primary function? K/U
photosynthesis. K/U 7. Briefly describe how guard cells are able to control
3. Why does the middle of the leaf (the spongy region) have stomata. K/U
loosely arranged cells? K/U
NEL 4.4 Tissues Working Together 139
Plant Cells and Tissues SKILLS MENU

In this activity, you will make your own slide of a plant tissue. You will Hypothesizing Observing
also observe prepared slides of other plant tissues. For each slide, you Planning Evaluating
will complete a labelled diagram highlighting the key features of the cells Controlling Variables Communicating
and tissues that you see. You will consider the differences between the
tissue samples.
Purpose Procedure
SKILLS HANDBOOK
1.B., 2.D.
Part A and B: To examine different plant tissues. Part A: Cross-Section of a
Part C: To compare the differences between the Celery Stalk
structures of the tissues and relate these structures to 1. Put on your lab apron and gloves.
their functions.
2. Obtain a piece of celery.
3. On the cutting board, use a scalpel or sharp knife
to cut across the stalk (Figure 1).
• lab apron
• disposable gloves
• scalpel or sharp knife
• cutting board or tray
• hand lens (magnifying glass)
• microscope slide
• light microscope
• celery or prepared slide of vascular bundles in a
celery stalk
• dropper bottle of iodine solution
• prepared slide of leaf cross-section
• complete plant with roots, stems, and leaves, such
mpressed
s
asdangerously
a radish or beet
reactive material
mmable and
Be careful when using sharp objects such as scalpels or
biohazardous
mbustible knives. Always cut downward on a cutting board or tray on
infectious material
aterial
the lab bench.
poisonous and Figure 1 Thin slice of celery stalk
infectious material
dizing
Iodine solution is toxic and can stain skin and clothing. Use
causing immediate
aterial
and serious toxic 4. Use the hand lens to observe the cut section.
disposable
effects gloves, handle the solution with care, and wash
your hands afterwards. Draw a diagram of your observations.
poisonous and
rrosive
aterial
infectious material
causing other
5. Carefully add a drop of iodine stain to the
toxic effects
cut section and use the hand lens to carefully
observe the vascular bundles.
6. Cut the thinnest slice possible from the stained
celery stalk. Place this on a clean microscope
slide and observe using low power. Draw a
diagram of your observations indicating the
arrangement of the vascular bundles.
Part B: Cross-Section of a Leaf Analyze and Evaluate
7. Obtain a prepared slide of a leaf cross-section. (a) What are the “strings” in a celery stalk? What is
8. Using low power, observe the organization their function? T/I
of cells in the leaf. Centre the slide and focus (b) On your leaf cross-section diagram from Step 8,
using the coarse-adjustment knob. Rotate the identify the regions where each of these events
nosepiece to medium power and focus using take place: T/I
the fine-adjustment knob. Compare what you (i) light absorption

observe with Figure 2.
(ii) water supply
vascular
upper epidermis (iii) carbon dioxide absorption
chloroplasts bundle
cuticle
(c) The root system of the plant observed in Part
C stores carbohydrates for the plant’s use.
palisade
layer
Roots are usually underground and are rarely
photosynthetic. Explain how the carbohydrates
spongy are transported to the root for storage. T/I
mesophyll
Apply and Extend

(d) Which unique cellular structures did you see that
air space
lower epidermis stomate could be linked to specific functions? T/I
guard cells (e) Create a table to summarize the major functions

Figure 2 Part of a leaf in cross-section
of the root, stem, and leaf of a plant. C
9. Make a labelled scientific drawing of the cells, (f) Why does a plant need light, water, and carbon
noting their shape and arrangement. dioxide? K/U
10. Carefully return the microscope to low power (g) Explain how water is transported to the leaf of
and return the slide to the teacher. a plant.K/U
C04-F05-UAOS10SB
Part C: Whole Plant
11. Obtain a whole beet or radish seedling. Carefully
remove any soil on the roots so that the root
structure can be seen.
12. Draw a diagram of this plant. Label the root
system and the shoot system. Identify the two
parts of the shoot system that can be seen.

SCI ENCE OSSLT
For the Love of Plants: The Royal Botanical Gardens

Things are blooming at the largest public garden in Canada. Royal RBG is much more than a tourist attraction. It also helps
Botanical Gardens (RBG) near Hamilton, Ontario, covers 11 km2: conserve Canada’s natural habitats and threatened species. RBG
about the size of 2500 football fields. The natural landscapes is home to some extremely rare plants, including the largest
and manicured gardens are home to more than 1100 species Canadian population of the endangered red mulberry tree. The
of plants. Over 20 professional plant specialists care for the bashful bulrush grows naturally in the Gardens and in only one
plants and grounds. Many enthusiastic volunteers also help out. other location in Canada.
RBG workers guard against damage from pests and encourage Scientists are actively engaged in restoring a large wetland
pollination by bees and butterflies. Every year, RBG botanists and called Cootes Paradise at RBG (Figure 3). They are interested in
their helpers start thousands of plants from seeds, bulbs, and how a habitat changes over time. They also conduct research
cuttings (Figure 1). They also grow some woody plants, such as on invasive species that come from other countries and damage
rose bushes and fruit trees, from grafts (Figure 2). In grafting, a Canadian ecosystems. RBG works with many other conservation
branch cut from a tree or shrub is attached to a parent tree, called organizations, including McMaster University and Environment
the root stock. The cut area heals against the parent tree, fusing Canada. Their aim is to preserve Canada’s native plant species,
the two together. The plant grows like a single organism, but the wild habitats, and ecosystems.
two parts keep their genetic differences.
Figure 1 The young plants need care and attention from the Figure 3 Cootes Paradise is a valuable wetland at Royal Botanical
greenhouse staff. Gardens. It is part of Hamilton Harbour.
RBG places great importance on public education. From

gardening tips to information about species survival, RBG
educators teach visitors about how plants affect our lives. The
work of the Gardens even extends well beyond its garden walls.
RBG is Canada’s national focal point for the Global Strategy for
Plant Conservation, which is an international agreement to protect
Earth’s plants. RBG staff present travelling workshops across
Ontario to train health care professionals to use plants in therapy
with the elderly and those with physical or mental challenges.
Figure 2 A twig of an apple tree is grafted onto a root stock.
The result of this hard work is a stunning show of flowers,

shrubs, and trees for visitors to enjoy.
142 NEL
Plant Growth 4.6
The pattern of growth in plants is dramatically different from what we
observe in animals. In animals, cell division occurs throughout the body
with many kinds of differentiated cells being able to divide. In plants, cell
division occurs only in certain parts of the plant. Most differentiated plant
cells cannot divide further. In addition, most animals grow to a certain
maximum size. Your arms and legs do not continue to grow throughout
your life. In contrast, plants continue growing for as long as they live.
How can some plants grow to be massive trees if cell division does not
occur throughout the entire plant?
Plant Meristems
You learned in Section 4.2 that specialized plant cells grow from unspecialized
meristematic cells. These meristematic cells are located near the tips of the
roots, in the growing parts of the shoots, and just beneath the outside layer of
the stem of woody plants (Figure 1). The meristematic cells at the tips of roots
and shoots form apical meristems. Meristematic cells around the stem and apical meristem undifferentiated cells
roots form lateral meristems. As the cells in these regions divide and grow, at the tips of plant roots and shoots; cells
that divide, enabling the plant to grow
these parts of the plant become longer and wider.
longer and develop specialized tissues
Apical Meristems lateral meristem undifferentiated cells

under the bark in the stems and roots of
In Activity 2.6, when you examined the phases of mitosis in an onion root,
woody plants; cells that divide, enabling
you were actually looking at an apical meristem region. You may have noticed the plant to grow wider and develop
that many of the cells were quite elongated. The growing tips of roots actually specialized tissues in the stem
have three distinct regions: the meristem region of cell division, the region of
elongation, and the region of maturation (Figure 2).
apical meristems in shoots

root hair
region of maturation
vascular tissue
region of elongation
lateral
meristems
region of cell division

(meristem)
apical meristems in roots root cap
Figure 1 Meristem regions in a woody plant Figure 2 The only cell division in a root takes place in the apical
meristem. Then the cells elongate, differentiate into various kinds of
specialized tissue, and mature.
C04-F06-UAOS10SB C04-F07-UAOS10SB
NEL 4.6 Plant Growth 143

immature leaves When meristem cells first divide in the tips of
roots, many of them begin to elongate. This makes
the root longer, so it pushes its way through the
soil. The cells in root tips may increase in length by
more than 10 times. As they elongate, they begin
apical
meristem to differentiate into specialized cells of the dermal,
ground, and vascular tissue systems. They complete
this process in the region of maturation. After this
point, most cells cannot continue to grow or divide.
meristem Growth in the apical meristems of shoots is more
forming
new bud
complex. The apical meristems are located in buds
at the very tips of the growing stem, as you saw in
Figure 3 In the shoot meristem, cell division forms tissues that will Figure 1 on the previous page. Apical meristems also
mature into leaves, stems, and perhaps flowers. occur at points along the stem, giving many plants the
ability to grow side branches off the main stem. The
C04-F11-UAOS10SB
buds contain the meristem as well as immature stem, leaf, and sometimes
flower parts (Figure 3). Cells produced by the apical meristems divide and
specialize as they form the new tissue systems of the stems, leaves, and flowers.
DID YOU KNOW? Lateral Meristems

Growing a Witch’s Broom Our most familiar long-lived plants are trees. These woody plants grow in
In medieval Europe, some people
both height and diameter. In addition to having apical meristems, woody
thought that magic caused dense
growths of branches on the side of a
plants contain lateral meristems within their stems and roots. Lateral
tree. More recently, scientific study has meristems form two cylinders, one inside the other, that run the full length
shown that a fungus alters chemical of the shoots and roots. As the plant grows in diameter, the outer lateral
signals in the apical meristem cells, meristem produces new dermal tissue, called cork, to replace the old
causing them to form numerous
epidermal cells. The inner lateral meristem produces new phloem tissue on
side branches. Some plant growers
intentionally infect young ornamental its outer surface and new xylem tissue toward its interior (Figure 4).
S10SB trees with the same fungus to keep
them small and densely branched. cork
son
outer lateral
meristem
(cork cambium)
inner lateral
meristem
(vascular meristem)
year 1
year 2
Figure 4 In the roots and shoots, phloem
lateral meristem differentiates into year 3
vascular tissue (xylem and phloem) and
epidermal tissue. Each year’s growth
of new vascular tissue forms a visible
ring of cells. xylem rings

As you see in Figure 4, the phloem and cork form the bark of the growing Learning Tip
tree, whereas the rings of xylem tissues form the interior of the tree trunk. Other Names for Lateral Meristem
The xylem keeps accumulating and causes the trunk to increase in diameter As you read other sources for
year after year. We can read the age of trees because each year’s growth information about plants, you
produces a noticeable ring of new xylem. may come across new scientific
Many plants do not contain lateral meristems. As a result, their stems and terminology. The innermost ring
of lateral meristem is sometimes
roots cannot grow any thicker once the first tissues formed by the apical
called the vascular cambium. The
meristems have matured. These plants cannot produce any woody tissue and
outer ring of lateral meristem is
therefore usually remain quite small. They are generally short-lived annuals, called the cork cambium.
completing their entire life cycle in one year.
Vegetative Reproduction
Clones are individuals that are genetically identical to each other. Clones
can occur naturally in both plants and animals. Identical twins are a familiar
example of natural animal clones.
Many plants produce clones naturally all the time. In this process, called
vegetative reproduction, a plant puts out special shoots or roots that vegetative reproduction the process
develop into new plants. These new plants have exactly the same genetic in which a plant produces genetically
identical offspring from its roots or shoots
information as the parent plant. There are many examples of vegetative
reproduction occurring naturally. A well-known example is that of reaDing Tip
strawberry plants that reproduce vegetatively by sending out shoots called Checking for Meaning
runners across the surface of the soil. When the meristems in the tips of You might come across a term that you
these shoots make contact with the ground, they begin growing roots and are unfamiliar with and ask, “What does
shoots that develop into a new plant (Figure 5(a)). A large clump of poplar this mean?” Try looking in the margin
to see if a definition is given. You can
trees are often all descended from a single tree, so they, too, are all clones also check the text surrounding the
(Figure 5(b)). Like the strawberry plants, the poplar trees usually remain unfamiliar term. A definition might be
connected to the parent plant. In this case, it might be more accurate to refer given in parentheses after the term, or an
to the cluster as a single tree with many stems rather than as many clones example might be used to help you figure
out the meaning of the unknown word.
of the original tree.
(a) (b)
Figure 5 Plant clones (a) Strawberry plants produce new plants by putting out long stems called
“runners” that can grow new roots. (b) Clusters of poplar trees are actually cloned stems of the
same plant. We can often identify these “super-organisms” in the fall because they all change
colour at exactly the same time!

Mass-Producing Plants
The natural cloning ability of plants to produce new young plants has
been used by farmers, gardeners, and agricultural scientists for centuries.
Different parts of a plant can be used to grow whole new plants. Every time
you grow a new plant from a stem, root, or leaf cutting, you are cloning
the original parent plant. Plant growers use these and other artificial forms
of vegetative reproduction to mass-produce clones of individual plants
that have desirable characteristics. Figure 6 shows two types of vegetative
reproduction commonly used in Canada.
(a) (b)
Figure 6 Vegetative reproduction can be used to create new plants from (a) “seed” potatoes, which
are not seeds at all but cut-up potatoes that sprout, and (b) leaf cuttings of pelargonium shoots.
Tissue Culture Propagation

One of the most fascinating techniques for plant cloning is called
tissue culture propagation a method tissue culture propagation. This process involves taking pieces of root or
of growing many identical offspring by another plant organ and breaking them down into individual cells. These
obtaining individual plant cells from one
cells are grown in a container with special chemicals that cause them to
parent plant, growing these cells into
calluses, and then into whole plants
revert back into undifferentiated cells and to begin dividing, similar to
meristem cells. As they continue to divide, each forms a clump of cells called
a callus (Figure 7(a)). These growing calluses can be separated over and
over again, producing a virtually unlimited number of growing cell masses.
At any point, new chemicals can be added to each callus. These chemicals
act like plant hormones and trigger the callus cells to begin the processes of
growth and differentiation. The end result is a new plant (Figure 7(b)).
(a) (b)
Figure 7 (a) Plant cells are specially treated to make them form calluses. (b) New plants grow from
the calluses.
Plants grown by tissue culture propagation are genetically identical to
their original parent plant. Thousands of clones can be produced from
a single parent plant using this method. This is very useful for the mass
growing of special high-yield varieties of crop plants or to produce uniform
ornamental plants (Figure 8).
Figure 8 Tissue culture propagation allows thousands of clones to be developed from a single
parent plant.
in SUMMARY
• Apical and lateral meristems are responsible for • Many plants use vegetative reproduction to
plant growth. produce new young plants with exactly the
• Apical meristems result in the growth in length same genetic information as the parent plant.
of roots and shoots and the production of leaves • Humans take advantage of vegetative
and flowers. reproduction to produce many identical
• Lateral meristems, which produce cork and new plants from one parent plant.
vascular tissues, are found only in woody plants • Tissue culture propagation is a modern technique
and result in the growth in width of stems. used to mass-produce plants.
CHECK YOUr Learning

1. In what ways is plant growth fundamentally different from 5. Only woody plants have lateral meristems, which produce
animal growth? K/U vascular tissues. Where do the vascular tissues in non-
2. Where are the two main types of meristem in plants? woody plants come from? K/U
Explain the role of each type. K/U 6. In a small group, brainstorm a list of the advantages a plant
3. What enables roots to push through the soil and trees to has when it is able to produce woody tissue. C A
grow tall? K/U 7. In what way is a callus similar to embryonic stem cells? A
4. Describe the location and arrangement of new phloem and

xylem tissues in a growing tree. K/U

CHAPTER
LOOKING BACK
4
Plants have a shoot system The organization of tissues, Plants have dermal, vascular,
and a root system. organs, and systems is and ground tissue systems.
different in plants to that
• The root system anchors the plant • Dermal tissues form the outermost
in animals.
in the ground and absorbs water layer of plants. (4.2)
and nutrients from the soil. Some • Plant organs are generally referred • There are two types of vascular
roots store food for the plant. to as plant parts. (4.1) tissue: xylem, which transports water
(4.1, 4.2) • Plant parts are made up of one or and dissolved minerals up from the
• The shoot system is primarily more of three different types of roots, and phloem, which transports
responsible for photosynthesis: tissue: dermal, vascular, and ground the food produced by photosynthesis
using solar energy to make food tissue. (4.1, 4.2) throughout the plant. (4.2)
from carbon dioxide and water. • Ground tissue, found between the
(4.1, 4.4) dermal and vascular tissues, is
• In most plants, the shoot system responsible for photosynthesis, food
also produces flowers for sexual storage, and support. (4.2)
reproduction. (4.1)
Scientists can change the Plant tissue systems interact Meristems determine the
genetic makeup of plants. to perform complex tasks. pattern of plant growth.
• For centuries, people have selected • Specialized cells in the tissues of • Meristematic cells are unspecialized
and grown plants that have the best a leaf have functions related to cells, similar to animal stem cells.
characteristics. (4.3) photosynthesis. (4.1, 4.4) (4.2, 4.6)
• Genetic engineering allows • The palisade layer and the • Meristematic cells are found in
scientists to grow plants that spongy mesophyll contain the apical meristems at the root and
produce substances that normally photosynthesizing cells. (4.4) shoot tips of all plants and in lateral
occur in other organisms. (4.3) • Vascular tissue brings water and meristems in the stems and roots of
• Genetic engineering involves nutrients to the leaf and carries the woody plants. (4.6)
transferring selected sections of manufactured food to other parts of • Cell division, growth, and
DNA from one organism to another. the plant. (4.2, 4.4) differentiation in apical meristems
The organisms with the new genetic • Guard cells in the epidermis create make roots and shoots longer. (4.6)
material are genetically modified openings (stomata) that allow gas • Cell division, growth, and
organisms (GMOs). (4.3) exchange and regulate water loss differentiation in lateral meristems
from the leaf. (4.4) form new vascular tissue and
epidermal tissue, making the
stems wider. (4.6)

THINK NOW? dermal tissue system (p. 126)
vascular tissue system
You thought about the following statements at the beginning of (p. 126)
the chapter. You may have encountered these ideas in school, ground tissue system (p. 126)
at home, or in the world around you. Consider them again and root system (p. 126)
decide whether you agree or disagree with each one. shoot system (p. 127)
meristematic cell (p. 129)
epidermal tissue (epidermis)
(p. 131)
periderm tissue (p. 131)
xylem (p. 132)
phloem (p. 132)
palisade layer (p. 137)
spongy mesophyll (p. 137)
cuticle (p. 137)
stomate (p. 137)
1 Plants have organs, just like animals.
Agree/disagree?
4 Plants have a circulatory system.
Agree/disagree? guard cell (p. 137)
apical meristem (p. 143)
lateral meristem (p. 143)
vegetative reproduction
(p. 145)
tissue culture propagation
(p. 146)
2 Respiration is the same as breathing.

Agree/disagree?
5 Cell division occurs in all parts of
a plant.
Agree/disagree?
BiG ideas
plants grow from seeds.
6 Plants use water in the process of
photosynthesis. made of specialized
Agree/disagree? cells, tissues, and organs
that are organized into
systems.
Developments in medicine
How have your answers changed? and medical technology
What new understanding do you have? can have social and

CHAPTER
REVIEW
4
What Do You Remember? 14. Why are the spikes of a cactus considered to be
modified leaves? (4.1) K/U
1. Copy the left-hand column of Table 1 into your

notebook. Complete the right-hand column as 15. Potato plants store starch. We use this starch
indicated. (4.1, 4.2) K/U as a food. In which part of the plant do potatoes
Table 1 Levels of Organization in Plants store their starch? Where does this starch
Level of organization List
come from? (4.1, 4.2) K/U
Systems (a) List two systems. 16. How is the growth of plants different from the
Tissue systems (b) List three tissue systems. growth of animals? (4.6) K/U
Parts of the plant (c) List four parts of the plant.

17. Name and briefly describe the two types of
Tissues used for (d) List two tissues used for
transportation transportation. reproduction in most plants. (4.1, 4.6) K/U
2. Draw a simple diagram of a plant. Label the 18. Why are non-woody plants limited in how large
main parts. (4.1) K/U
they can grow? (4.6) K/U
3. State the main function for each part of a plant. 19. Name the plant tissues that are specialized to
(4.1) K/U
provide strength and support. (4.2) K/U
4. Identify the parts of a plant and the specialized 20. Indicate where water enters and exits a plant.
cells involved in gas exchange. (4.4) K/U
Name and describe the specialized cells involved at
both the entry and exit points. (4.1, 4.2, 4.4) K/U
5. What is the name given to undifferentiated plant

cells, and where are these cells located? (4.2, 4.6) K/U
21. What substances does a plant require for
respiration? (4.1) K/U
6. Plants and animals must perform some of the

same functions. Name three functions that plants 22. How are meristems in plants similar to and
and animals both carry out. (4.1, 4.4) K/U
different from stem cells in animals? (4.2, 4.6) K/U
7. What is plant cloning? (4.6) K/U

Solve a Problem
8. Plants have many adaptations to stop them 23. Identify what parts of a plant are shown in
from drying out. Briefly describe two of these Figure 1(a) to (d). (4.1, 4.2, 4.4–4.6) K/U
adaptations. (4.2, 4.4) K/U
9. List the functions of a plant’s roots. (4.1, 4.2, 4.4) K/U
10. What are the structures inside chloroplasts that

collect light energy? (4.1) K/U
(a) (c)
What Do You Understand?
11. Why do plants not need to eat? Describe how
they obtain their nutrients. (4.1, 4.2, 4.4) K/U
12. Draw a simple diagram of a plant root tip.

Indicate where the three types of plant tissue (b) (d)
are located. (4.6) K/U C Figure 1
13. Briefly describe the general function of each 24. Identify one location in plants where the cells are
tissue type in a plant root tip. (4.1, 4.2, 4.6) K/U loosely arranged. What is the function of these
cells, and why are they loosely arranged? (4.4) K/U

25. How can a plant easily regrow a damaged stem Reflect On Your Learning
or leaf? (4.2, 4.6) K /U
36. In this chapter, you learned about specialized

26. Explain how stripping the bark from a tree might cells and tissues in plants. What did you find
kill the tree. (4.6) A
most interesting or most surprising? Write two
27. Why do you think wind-pollinated plants questions that you would like to have answered
generally produce more pollen than animal- through further study.
pollinated plants? (4.1) A
37. Plants are often considered to be less important
28. Mowing your lawn could result in the top half in the ecosystem. At-risk or threatened plants
of the leaves of grass being cut off, yet the grass generally receive less public attention than at-risk
keeps on growing. Using your knowledge of or threatened animals. In a paragraph, present an
meristems and plant growth, explain why the argument that plants are more important and should
grass keeps on growing. (4.6) A
receive more attention than animals. How has this
chapter helped you prepare your argument?
29. Write the word equation for photosynthesis and
then, considering each component in the equation, Web Connections
describe how the structure of a leaf has developed
38. The McIntosh apple (Figure 2) is one of the most
to allow photosynthesis to occur. (4.4) K/U T/I
popular apple varieties in Canada. Research the

30. How could you distinguish between the upper origins of this type of apple. Present your findings
surface and the lower surface of a leaf? (4.4) K/U
as a paragraph to be printed in an advertising
brochure for an apple pie bakery. T/I C A
Create and Evaluate

31. Imagine you are a water molecule. Write a
short story describing your travel route after
being absorbed through a root hair and
ending up in the process of photosynthesis.
(4.1, 4.2, 4.4) K/U T/I C
32. Compare the advantages of asexual reproduction

Figure 2
and sexual reproduction in plants. (4.1, 4.6) K/U
39. Investigate why poinsettia leaves turn red around

33. Design an experiment in which you might midwinter. How could you use this information
determine which fertilizer formula promotes to encourage your poinsettia to turn red in time
the best plant growth. Be sure to identify the for the next winter holiday? Communicate your
independent and dependent variables and suggest findings in an e-mail to your grandparents. T/ I C A
a suitable control for the experiment. T/I A
40. Find out what structures are present in a plant

34. Jack and Jill carved their initials in the bark of a seed, such as a bean. Create a visual presentation
tree trunk 1 m above ground level. The tree was showing how these structures grow to form an
5 m tall at the time. Twenty years later, the tree adult plant. T/I C
is 15 m tall. How far above ground level are their

initials now? Explain your answer. (4.6) T/I 41. The leaves of a plant growing in a darkened
room will bend toward any source of light. This
35. Climatologists use the growth rings of trees to infer is referred to as phototropism. Research why
what the climate was like during the lifetime of the plants behave this way. Also research other plant
tree. Explain how the growth rings might provide tropisms and what causes them. T/I
information to make this kind of inference.

(4.6) K/U T/I To do an online self-quiz or for all

CHAPTER
SELF-QUIZ
4
For each question, select the best answer from the four Indicate whether each of the statements is TRUE or FALSE. If
alternatives. you think the statement is false, rewrite it to make it true.
1. Which part of the plant carries out the process of 7. The shoot system is another name for the stem of
reproduction? (4.1) K/U a plant. (4.1) K/U
(a) flower 8. Phloem transports food produced by

(b) leaf photosynthesis throughout the plant. (4.2) K/U
(c) root
(d) stem 9. The spongy mesophyll is an inner region of a leaf
with loosely packed cells. (4.4) K/U
2. In which of the following plants would you

expect to find periderm tissue? (4.2) K/U
Copy each of the following statements into your notebook. Fill
(a) a water lily in the blanks with a word or phrase that correctly completes
(b) an oak tree the sentence.
(c) a cactus
10. The organelle where photosynthesis takes place is
(d) a poinsettia
called a(n) ________________. (4.1) K/U
3. What are the products of photosynthesis?

11. Thylakoids are arranged in stacks called
(4.1, 4.4) K/U
______________. (4.1) K/U
(a) carbon dioxide and water

(b) water and oxygen 12. Plant eggs produced by the female reproductive
(c) oxygen and sugar organ are fertilized by ____________ produced
(d) sugar and carbon dioxide by the male reproductive organ. (4.1) K/U
4. Plant cells that can differentiate into specialized Match each term on the left with the most appropriate
tissues are called description on the right.
(a) stomata cells. 13. (a) stomata (i) a layer of wax on the surface
(b) transgenetic cells. (b) cuticle of leaves
(c) epidermal cells. (c) chloroplast (ii) a structure that controls the
(d) meristematic cells. (4.2, 4.6) K/U (d) guard cell size of openings
(iii) an opening that allows for
5. What material forms the tube-shaped structures
the exchange of gases
that carry water from the roots to the leaves?
(iv) an organelle that carries out
(4.2) K/U
photosynthesis
(a) chlorophyll (4.1, 4.2, 4.4) . K/U
(b) cuticle
(c) stomata Write a short answer to each of these questions.
(d) xylem
14. Briefly describe one difference between plants
6. Which of these plants stores the most starch in and animals that applies to all plants and
its roots? (4.1) K/U animals. (4.1, 4.4) K/U
(a) yam 15. You are planning a study of the cells in the stem
(b) tomato of a tomato plant. (4.1, 4.2) T/I
(c) pumpkin
(a) Identify two tools you would need for this
(d) apple tree
study and describe how you would use them.
(b) Identify three types of cells you would look
for and describe their functions.
16. (a) Identify the two products of photosynthesis, 22. Complete the diagrams below by labelling the
and describe how animals take in each of tissues. Each space should be labelled as dermal,
these products. vascular, or ground. (4.2, 4.4) C
(b) Explain why each product is essential to the (i) ______ tissue
survival of animals. (4.1, 4.4)
K/U
(ii) ______ tissue
17. Plants need water, carbon dioxide, and sunlight (iii) ______ tissue
to produce food. Design an experiment to study
the effect of each of these resources on plant
growth. Describe how you would first deprive
the plant of each resource and then observe the
effect of restoring the resource. (4.1, 4.4) T/I
18. A student’s backyard contains two maple trees.

One maple tree has a trunk that is 2 m in
diameter, and one maple tree has a trunk that
is 3 m in diameter. Which tree is older? Explain
(a)
your answer. (4.6) T/I
19. Draw a diagram of the cells in a root tip.

Label the root cap, the region of cell division,
the region of elongation, and the region of (i) ______ tissues
maturation. (4.6) C
(ii) ______ tissues
20. Explain how each plant tissue has a similar C04-F99A-UAOS10SB

function to the organ or organ system in the (iii) ______ tissues
human body. (b)
(a) dermal tissue and human skin

(b) vascular tissue and the circulatory system (i) ______ tissues
(c) ground tissue and the skeletal system
(4.2, 4.4) A
(ii) ______ tissues

21. You are planning to study the reproduction and
propagation methods of several flowering plants
in your area.
C04-F99b-UAOS10SB (iii) ______ tissues
(a) Name four questions you would ask during (c)
your study to determine each plant’s
methods of reproduction. 23. A hedge always grows new leaves after it is
(b) Name four questions you would ask during pruned. However, a human cannot grow a new
your study to determine each plant’s methods finger if it is lost in an accident. Explain why
of spreading its seeds. (4.1, 4.6)
T/I C animals and plants respond differently to the loss
of a body part. (4.2, 4.6) A
24. Imagine you are a carbon atom that is part of

C04-F99c-UAOS10SB
a compound floating in the air. Describe your
journey into a plant and the changes that take
place there. Then describe how you become part
of an animal and how you return to the air. In
each phase tell what chemical compound you are
part of. (4.1, 4.2, 4.4) K/U T/I C

UNIT
LOOKING BACK
B
UNIT B
Tissues, Organs,
and Systems of
Living Things

Division, and Cell
Specialization
KEY CONCEPTS KEY CONCEPTS KEY CONCEPTS

All organisms are Complex animals Plants have a shoot
made up of one or are made up of cells, system and a root
more cells. tissues, organs, and system.
organ systems.
Microscopes enable The organization of
us to examine cells Scientists use tissues, organs, and
in detail. laboratory systems is different
techniques to in plants to that in
The cell cycle explore structures animals.
mitosis cytokinesis
cycle begins
cell
and functions within

cell grows
occurs in distinct
animals’ bodies.
se
interpha
DNA replicates
regarding division
stages. Plants have

dermal, vascular,
Cell division is Each organ system and ground tissue
has a specific systems.
muscular skeletal
important for
system system
growth, repair, and function and

reproduction. corresponding Scientists can
specific structures. change the genetic
C03-F20-UAOS10SB.ai
Cancer cells Illustrator

makeup of plants.
nasal cavity
generally divide mouth

There are four main
more rapidly than UAOS10SB
types of animal Plant tissue systems
tissues.
0-17-635528-6
normal cells. trachea

Figure Number
Company
Creative
Pass
C03-F20-UAOS10SB.ai
Nesbitt Graphics
2nd Pass
interact to perform
complex tasks.
Approved X
Not Approved
bronchi ciliated epithelial cells
Medical imaging lung

Organ systems
Unit A Tissues:
technologies interact to keep Meristems
are important in the organism determine the
Company Theresa Sakno bronchioles

Creative alveoli
functioning.
Pass
diagnosing and pattern of plant

Approved
Approved
Not approved
treating disease.
Ontario Science 10SB growth.
Unit A Tissues:
Unit A Tissues:
Figure Number C03-F07A-UAOS9SB

Research is helping
Company
Company
Theresa Sakno
Creative
Theresa Sakno
people overcome
Creative
Pass
Pass
Approved
Approved
illness and injury.
Approved Approved
Not approved
Not approved

MAKE A SUMMARY
Imagine that you are attending a conference entitled “Tissues, Part B: Expert Group Workshops
Organs, and Systems of Living Things.” The whole class 2. Experts with the same specialties from each Trio Group will
will attend the conference to share “best practices” in a meet as delegates at a “workshop.” For example, all of the
jigsaw-style learning structure. Each person will have two Implications Experts will get together.
important roles:
3. The conference organizer (your teacher) will post a list
(1) as a member in one home Trio Group of topics to be covered. Sign up to present a sample of
(2) as a delegate in an Expert Group his or her work that best covers one of the topics.
Part A: Selecting Areas of Expertise within the Trio Group 4. Take turns with the other delegates to present your
contribution at the workshop. Hand out a printed summary
1. In your Trio Group, cooperatively choose one of the following
of your presentation to the other delegates in the workshop.
roles for each member.
• Implications Expert (Specialty: the importance of medical 5. During or between the presentations, you may ask questions
and technological developments related to systems biology; of other delegates to help clarify the work and to develop
analysis of social, ethical, and environmental implications) your expertise.
• Animal Expert (Specialty: animal cell division and cell Part C: Trio Group Sharing
specialization; tissues, organs, and systems in animals;
6. Reassemble with your Trio Group. Share what was learned at
research skills)
the expert workshops.
• Plant Expert (Specialty: plant cell division and cell
specialization; tissues and tissue systems in plants; 7. Working together with your Trio write point-form notes for
research skills) each of the Overall Expectations listed at the beginning
of this unit (page 20).
CAREER LINKS
List the careers mentioned in this unit. Choose two of the careers that interest you, or choose
two other careers that relate to tissues, organs, and systems of living things. For each of these
careers, research the following information:
• educational requirements • duties/responsibilities
(secondary and post-secondary) • potential employers
• skill/personality/aptitude requirements • salary
Assemble the information you have discovered into a poster. Your poster should compare
your two chosen careers and explain how they connect to this unit.

UNIT
UNIT TASK
B
Family Health Supporter SKILLS MENU
A friend or family member has come to you for Researching Decision
support in coping with a health care concern. You Alternatives Evaluating
offer to help by researching and providing a package Analyzing
of information related to the particular health the Issue
concern. Remember that self-diagnosis is not reliable;
SCENARIO 5 Your dog was running after a ball and
only health professionals should make diagnoses
suddenly started limping. The vet said that your dog
and recommend treatments, in consultation with the
tore her anterior cruciate ligament and may require
patient or the patient’s family.
surgery to repair the ligament. Before your family
With your group, read the scenarios that follow.
commits to the surgery, you want to find out about
Choose one of the scenarios as your health issue.
this injury and alternative treatment options.
The Issue SCENARIO 6 Your tennis partner has developed a
very sore shoulder. Initial online research suggests
SCENARIO 1 Your uncle had abdominal pain and
that the cause might be rotator cuff tendonitis. Your
was mysteriously losing weight. Four weeks later, he
partner thinks there is no point in going to the
was diagnosed with Crohn’s disease. His family needs
doctor. You decide to assemble some information
to understand the origins and effects of the disease
for your friend about long-term effects of untreated
and how it can be treated or managed.
tendonitis and treatment options.
SCENARIO 2 During a hockey game, one of your
teammates was knocked down onto the ice and slid Goal
headfirst into the boards. Your teammate was taken to To provide information and support to enable your
the hospital for tests. You will be visiting your friend friend or family member to take the appropriate
in hospital and want to share as much information as actions toward diagnosis, treatment, or management
you can about the possible injuries, what to expect, of the condition.
and how to avoid further injury.
SCENARIO 3 Your elderly cat has been unwell. Gather Information
The veterinarian says that the cat’s kidneys are Working in your group, review your chosen scenario.
not working effectively. The vet mentions several Research the functioning of the organ in the healthy
treatment options: changing to a low-ash cat food, a state and how this functioning is affected by the
drug to help the kidneys work better, and peritoneal disease or injury. Find out what specialized cells,
dialysis. You need to help your family come up with tissues, organs, or organ systems are affected by the
an informed decision on the cat’s treatment. condition.
SCENARIO 4 Your best friend’s mother has had Find out about the disease or injury’s possible
a chronic cough for several months. She visited causes, diagnosis, and treatment. Investigate how
her doctor last week to discuss her chest pain, the diagnostic technologies and treatments relate to
weight loss, and severe fatigue. Her doctor ordered the “biology” of the disease or injury. Decide what
tests to look for lung cancer. She is anxious about information you need to gather in order to best
going through the tests. You would like to prepare address the issue you selected.
information for her so that she understands the Distribute the various research tasks among the
types and purposes of the diagnostic tests she may members of your group. Determine what resources
be undergoing. you will use to gather your information. Use a variety
of resources. Write a brief plan for conducting your
research.

Assemble information on Communicate
• how that part of the body functions when healthy Communicate the information you have gathered as
• how the illness or injury affects that part of • an informal chat with the person or family about
the body your research findings, including the main issue
• what diagnostic technology is likely to be used and what diagnostic and treatment technologies
• what possible treatments might be available might be available;
• pros and cons of the possible treatments • a written summary of the information you have
• recommended follow-up care discovered, with diagrams, plus a list of resources
As you research, keep these points in mind: (websites, community agencies) for individuals
• Keep detailed notes and sketches. who would like more detailed information;
• Record your sources of information. • a written list of questions for the person (or the
• Analyze your information for reliability and bias. animal’s owner) to ask the doctor or vet; and
• Remember that your goal is to provide • your response to the main issue in the form of
information and support to your friend or family recommended “next steps” (accompanied by an
member. You are not qualified to act as a medical acknowledgement that you are not a medical
expert. professional) in a format of your choice.
• Focus on the positive.
Identify Solutions Your completed Performance Task will be
Decide what is the main issue raised in your chosen assessed according to the following criteria:
issue. As you put together the information package,
make sure that you address this issue and present Knowledge/Understanding
some possible solutions. Consider the following ✔ Address diagnostic and treatment technologies in your
questions: informal chat.
✔ Use appropriate terminology in your written summary
• What is needed: information about diagnostic
and diagrams.
tests, treatment options, or disease management ✔ Display a clear understanding of the tissues and organs
strategies? This should determine the focus of the involved in the questions that you suggest.
information you provide. ✔ Recommend reasonable “next steps.”
• What recent technological developments are
Thinking/Investigation
there in the diagnosis, treatment, or management
✔ Identify the main issue you need to address.
of the patient’s condition?
✔ Use research skills to gather information about the health
• What studies have been done showing the risks concern.
and benefits of certain tests or treatments? ✔ Analyze the sources for reliability and bias.
• Are there any controversial technologies or ✔ Use critical thinking to recommend “next steps.”
ethical questions regarding the treatments that
Communication
you have identified?
✔ Communicate orally in a clear and encouraging manner.
Make a Decision ✔ Prepare organized, logical, and factually accurate written

information.
You are providing information that will help someone ✔ Acknowledge, when communicating possible “next steps,”
else make a decision regarding the main issue that where to go for professional medical advice.
you have identified. You must maintain an objective
Application
stance and present all sides of the issue. However,
✔ Assess the importance of medical technological
when a person or family is looking for information,
developments for human or animal health.
they are sometimes also looking for opinions. ✔ Suggest a course of action to deal with the specific
Consider what you feel would be the best response to health issue.
the issue for the patient.
NEL Unit B Task 157

UNIT
REVIEW
B
What Do You Remember? 8. Cells that contain only half of the DNA from
For each question, select the best answer from the four each parent are called
alternatives. (a) clones.
1. All living things contain (b) zygotes.
(c) gametes.
(a) cells.
(d) chromosomes. (2.3) K/U
(b) tissues.
(c) organs. 9. Which of the following best describes connective
(d) organ systems. (2.1) K /U tissue? (3.1) K/U
2. All living things are able to (a) tissue that provides support and protection
for various parts of the body
(a) photosynthesize.
(b) tissue that conducts electrical signals from
(b) reproduce.
one part of the body to another
(c) move.
(c) tissue that contains proteins that can contract
(d) breathe. (2.1, 2.3) K /U
and enable the body to move
3. Identify the type(s) of tissue found in the (d) tissue made of tightly packed cells that covers
heart. (3.4, 3.8) K /U body surfaces and lines internal organs
(a) epithelial 10. Which of the following is a product of
(b) muscle photosynthesis? (2.1, 4.1, 4.4) K/U
(c) nerve
(a) water (c) solar energy
(d) all of the above
(b) oxygen (d) carbon dioxide
4. Which one of the following tissue systems is not
11. During which part of the cell cycle are the DNA
part of a plant? (4.2) K /U
strands replicated? (2.5) K/U
(a) vascular
(a) anaphase (c) metaphase
(b) ground
(b) prophase (d) interphase
(c) respiratory
(d) dermal
5. Which phase of mitosis is marked by If you think the statement is false, rewrite it to make it true.
chromosomes lining up along the middle 12. Animals have levels of organization (a hierarchy)
of the cell? (2.5) K /U
for structure and function, including cells, tissues,
(a) prophase (c) anaphase tissue systems, and organ systems. (3.1) K/U
(b) metaphase (d) telophase

13. The tissue system responsible for transporting
6. Which of the following organs cannot be materials around a plant is called the dermal
transplanted from one person to another? tissue system. (4.2) K/U
(3.7) K/U
14. The phase of mitosis during which DNA

(a) cornea (c) spinal cord replicates is called prophase. (2.5) K/U
(b) lung (d) blood

15. The organ system in humans responsible for
7. In plants, the cells that can develop into any kind sending information to and from the heart is
of tissue are called called the nervous system. (3.4, 3.10) K/U
(a) meristem (c) the root cap

(b) xylem cells (d) palisade cells (4.2, 4.6) K/U

16. The part of a plant that contains only the male Match each term on the left with the appropriate description
sex cells is the seed. (4.1) K /U on the right.
29. (a) diabetes (i) an inflammation of
17. Cancerous tumours may form when cells stop (b) tuberculosis the lining of the large
dividing. (2.7) K /U
(c) osteoporosis intestine
18. The main function of leaves on a plant is (d) multiple (ii) a disease that destroys the
protection. (4.1, 4.2) K /U sclerosis myelin sheaths of neurons
(e) colitis (iii) a condition in which the
19. When there is a good supply of water within a pancreas produces too
plant leaf, the guard cells close the stomata to much or too little insulin
prevent the water from escaping. (4.4) K/U
(iv) a disease that involves
20. Veins carry oxygenated blood from the lungs to the loss of bone tissue,
other parts of the body. (3.4) K /U
making bones brittle and
weak
Copy each of the following statements into your notebook. Fill (v) an infectious disease
in the blanks with a word or phrase that correctly completes caused by bacteria growing
the sentence. in the lungs (3.3–3.10) K/ U
21. Two main sources of blood stem cells are

____________ and ____________. (3.2) K/U
30. Give three reasons why cells divide. (2.3) K/ U
22. _________ tissue transmits signals to the

_________ tissue, instructing it to contract. 31. Define the term interphase. Explain what occurs
(3.8, 3.10) K /U
during this part of the cell cycle. (2.5) K/ U
23. The organ systems that help remove waste 32. Why must a cell’s nucleus replicate during
substances from your body are the ___________, mitosis before cell division proceeds? (2.5) K/ U
the ___________, the ___________, and the

33. When looking at two samples of cells, how can
___________ systems. (3.3, 3.4, 3.6, 3.8) K/U
you tell that cell division is more rapid in one

24. The organ system that enables you to sample than in the other? (2.6, 2.8) K/U
detect changes in your environment is the

34. Identify several factors that affect the growth and
___________ system. (3.10) K /U
cell cycle rate of healthy cells. (2.5, 2.7) K/ U
25. Guard cells close to conserve __________ at

35. List three factors that are known to increase the
night. (4.4) K /U
risk of cancer in humans. (2.7) K/U
26. Skeletal muscles always work in opposing

36. Which body systems work together to provide
___________: one muscle causes the joint to
nutrients to all of your cells? Explain your
___________; the other muscle causes the joint
answer. (3.3, 3.4) K/U
to ___________. (3.8) K /U
37. One way that plants differ from animals is that

27. During the process of diffusion, substances move
plants cannot move from place to place. Explain
from an area of ___________ concentration to
why plants do not have to move from place to
an area of ___________ concentration. (2.3) K/U
place in order to survive. (4.1, 4.2, 4.4) K/ U
28. The process by which a cell becomes specialized

38. Choose one type of animal tissue and explain
to perform a specific function is called
how the structure of that tissue supports its
__________________. (3.2) K /U
function. (3.1, 3.3, 3.4, 3.6, 3.8, 3.10) K/ U
NEL Unit B Review 159

What Do You Understand? 51. A frog uses its skin as a respiratory surface.
Explain how this can be both an advantage and a
39. Why are the roots of a carrot plant so much
disadvantage. (3.4) K/U
larger than the roots of a grass plant?

(4.1, 4.2) K/U 52. In addition to food and medicine, list four ways
in which plants are used in your everyday life.
40. Describe an example of regeneration that you or
(4.1) A
someone you know has experienced. (3.2) A
41. (a) Describe at least two similarities between the 53. (a) What are the functions of animal epithelial
process of photosynthesis and the process of tissues?
cellular respiration. (b) What are the functions of plant dermal
(b) Describe at least two differences between the tissues?
process of photosynthesis and the process of (c) What are the similarities and differences in
cellular respiration. (2.1, 4.1, 4.4) T /I these functions? (3.1, 4.2, 4.4) K/U
42. Draw the stages of mitosis in animal and plant 54. Compare the transport system in a plant with
cells. Use these diagrams to compare mitosis that in an animal. (3.4, 4.2, 4.4)K/U
in plant and animal cells. Identify differences 55. Compare how a plant and an animal obtain
between animal and plant cell mitosis. nutrients. (3.3, 4.2, 4.4) K/U
(2.5, 2.6) K/U C
56. Create a table to compare the hierarchy of

43. Create a table to compare healthy cells with organization in plant and animal bodies.
cancer cells. Include the following headings (3.1, 4.1) K/U C
in your table: Rate of cell division; Level of

specialization; Length of mitosis; Appearance of 57. Create and complete a table that compares
cell; and Ability to move. (2.6–2.8) K /U C asexual reproduction in plants with asexual
reproduction in animals. (2.3, 4.6) K/U C
44. Briefly describe at least three medical imaging

technologies. Explain how each technology is 58. Several animal organ systems were mentioned
used in the diagnosis of injuries, diseases, or in Chapter 3. Create a concept map to show how
disorders. (2.7, 3.4, 3.6, 3.8, 3.9) K /U these organ systems work together to keep the
human body functioning. (3.3, 3.4, 3.6, 3.8, 3.10,
45. Explain in your own words how an increase in 3.11) K/U C
the volume of a cell affects its ability to meet its

needs. (2.3, 2.4) K /U 59. Create a concept map that shows the four
components of blood. Include a brief description
46. Differentiate between the three types of of each component’s function in your map. (3.4) C
muscle. (3.8) K/U
60. Some organelles in a single-celled organism

47. What is the advantage of treating specialized cells perform functions similar to those of organ
to make them behave as stem cells? (3.2) K /U A
systems in a human body. For each of the
48. Describe the main difference between organelles listed below, choose an organ or organ
xenotransplantation and regular organ system that performs a similar function. Explain
transplantation. (3.7) K /U A each of your choices. (2.1, 3.3, 3.4, 3.8, 4.2) T/ I
(a) endoplasmic reticulum

49. Some kinds of pollen are very light and are
(b) Golgi bodies
blown by the wind. Explain how this helps a
(c) cytoplasm
plant reproduce. (4.1) K /U
50. In what type of climate would you be likely to

find a plant with a very thick cuticle around its
leaves and stem? (4.2, 4.4) K /U

Solve a Problem 65. Your red blood cells and your outermost layer
of skin cells do not contain a nucleus.
61. Some aquatic plants grow on the surface of a
(2.5, 3.2) K/U T/I A
pond, while others grow at the bottom of a pond.

Predict what would happen to the plants growing (a) What happens to these cells, in terms of the
at the bottom if the plants on the surface grew and cell cycle?
covered the entire surface of the pond. (4.4) T/I
(b) If a skin cream claimed to restore cells in your
skin, could your cells produce new skin cells?
62. What is one advantage and one disadvantage of (c) Design a test for the claim that new skin cells
having a body made mostly of specialized cells are being created by a skin cream.
rather than a body made of one type of cell that
performs many functions? (2.9) T /I
66. Table 2 shows the approximate lifespan of
different human body cells. T/I A
63. People with the blood disorder anemia have

Table 2 Human Cell Lifespans
a deficiency of hemoglobin in their red blood
cells. Explain how this disorder could affect the Cell type Lifespan
function of the circulatory system. (3.4) T/I A
stomach and intestinal cells 2 to 5 days
64. During a lab activity, a researcher counts cells skin cells 2 weeks
in two areas of a sample. Cells in all stages of red blood cells 3 months
the cell cycle are present in the sample. The
bone 10 years
observations are recorded in Table 1. These
cells normally take 15 hours to complete one brain 30 to 50 years
cell cycle. T /I C
(a) Why do you think different cells have such a

Table 1 Cell phase data range of lifespans?
Percentage Time for (b) How would this affect injuries in different
Cell stage in each each regions of the body?
or phase Area 1 Area 2 stage/phase phase (h)
67. A new sunblock product claims to have an SPF
interphase 85 78
rating of 60. This means that you get 60 times
prophase 14 9 your body’s natural defence against the Sun’s
metaphase 3 1 UVB rays. T/I C A
anaphase 2 3 (a) How could you test this claim? Comment on

the ethics of your test.
telophase 3 5
(b) If many skin cancers are associated with
cytokinesis 9 6 UVA rays, what impact could this product
Total cell have on cancer rates?
count
(a) Copy Table 1 into your notebook. Calculate

the percentage of cells in each phase and
how much time is spent in each stage or
phase of the cell cycle.
(b) Create a circle graph for either Area A or
Area B, indicating the percentage of cells in
each stage/phase.

68. Following the Chernobyl nuclear disaster in 77. A friend tells you that you should not have a
1986, many people developed cancers. The plant in your bedroom because at night the
radiation damaged chromosomes, so they plant takes oxygen from the air that you need
could not control their cells in the normal to breathe. Is your friend correct? Explain your
way. (2.7) K/U T/I A
answer. (4.4) K/U T/I
(a) How might this affect cell division? 78. Write a brief paragraph describing the journey of
(b) How could you detect this effect on cells? an oxygen molecule as it enters the nose and finally
69. Most flowering plants will produce fruit only ends up in a muscle cell. (3.3, 3.6, 3.8)
K/U C
if the flower has been pollinated. How might 79. Grafting is a technique sometimes used to grow
this affect a fruit grower’s decision to use plants and trees. For example, to produce an apple
pesticides? T /I A
tree by grafting, the stem from one tree is inserted
70. When fruits mature, they begin to release a gas into a cut in the stump of another tree. If the graft
called ethene. Ethene will cause nearby fruits to is successful, these two parts will grow together
ripen as well. T /I A and form a new apple tree. Is grafting an example
of sexual or asexual reproduction? How do you
(a) How could you test this effect using a ripe
know? (2.3, 4.1, 4.6) A
banana?
(b) How could you design a method to reduce
this effect so that you could make fruit last Reflect On Your Learning
longer in your home?
80. Which phase of the cell cycle is the most difficult
71. How could you demonstrate that the vascular to clearly identify? Explain why you had difficulty
tissue connects all parts of a plant? T /I
with this particular phase. Ask your classmates
for tips in helping to identify this phase.
72. Choose two related organ systems and explain
how they work together. (3.3, 3.4, 3.6, 3.8, 3.10, 81. Prior to completing this unit, what were your
3.11, 4.2, 4.4) K/ U A
thoughts and ideas about transgenic plants? How
has your understanding of GMOs changed?
73. Suggest what causes solutions to move water
through the xylem and phloem of plants. Explain 82. Before starting this unit, you may have had
your answer. (4.2) K /U
certain beliefs about the causes of cancer and
heart disease. Is there anything you can do now
to reduce your own risk of developing cancer or
Create and Evaluate
heart disease? Explain.
74. Using students in your class, act out the phases
83. In this unit, you learned that plants and animals
of the cell cycle, including mitosis. (2.5) K /U C
have both transport and gas exchange systems.

75. Choose one local fundraising activity associated (a) What relationship is there between the
with one of the diseases described in this unit. transport and gas exchange systems of plants
Prepare a public relations campaign for the and animals?
students in your class or school to promote this (b) Does this relationship make sense to you?
event. (2.7, 3.2, 3.3, 3.4, 3.6, 3.8, 3.10) K /U C A
Explain why or why not.
76. For plants, what are the advantages and (c) What other comparisons between plants and
disadvantages of growing tall? animals can you make?
(4.1, 4.2, 4.4, 4.6) A
84. In this unit, you have read about many uses for
imaging technology. Has this information made
you interested in a career in imaging technology?
Briefly explain your answer.

85. (a) Before studying this unit, what were your 88. (a) What is tissue engineering? Summarize your
opinions about organ donation? findings in a brief report.
(b) How has your understanding of organ (b) Name at least one organ that should be
donation changed? considered for future tissue engineering
research. Explain why and how this
Web Connections organ should be considered for this
process. T/I C A
86. Copy or trace Figure 1 into your notebook. Find

out what each sections of the ECG corresponds 89. Choose a type of cancer that you are interested
to the different parts of a heartbeat cycle. Use in learning more about. Research this
the Internet and other resources to help you. Use disease to determine whether there are any
your research to add descriptive labels to your environmental causes, lifestyle factors, or other
ECG trace. T /I C contributing factors. Create a short radio “spot”
telling listeners how to minimize their risk of
contracting this disease. T/I C A
R
90. Investigate the phenomenon of colony collapse
disorder. This disorder has been reported in
P T North America and Europe. T/I C A
(a) Conduct research to identify what this is and

Q where it has been observed.
S
(b) Predict what impact this might have on
0 0.2 0.4 0.6 0.8 our food supply. Write up your prediction
seconds as a letter to the editor of an agricultural
Figure 1 A portion of an electrocardiogram (ECG) magazine.
87. Research the differences in the digestive systems

of mammals that eat only meat and mammals
that eat only plants. Create two labelled models
or diagrams to communicate your finding. T/I C
For all Nelson Web Connections,


UNIT
SELF-QUIZ
B
the sentence.
1. Which of the following organelles is present in
plant cells but not in animal cells? (2.1) K/U 8. Woody plants, such as trees, contain both apical
(a) nucleus and ___________ meristems. (4.6) K/U
(b) cell wall 9. The respiratory system and the ____________

(c) cytoplasm system work together to provide oxygen to the
(d) Golgi body body and to remove carbon dioxide from the
2. Which of the following lists the levels of body. (3.4, 3.6) K/U
organization within an animal in order from

simplest to most complex? (3.1, 4.1, 4.2) K/U Match each term on the left with the most appropriate
(a) tissue, organ, cell, organ system, organism description on the right.
(b) organism, tissue, organ system, cell, organ 10. (a) mitochondrion (i) holds the genetic
(c) organ, organism, organ system, tissue, cell (b) cytoplasm information that
(d) cell, tissue, organ, organ system, organism (c) nucleus controls all cell
(d) cell membrane activities
3. Which phrase correctly describes the vascular (e) chloroplast (ii) absorbs light
tissue system in a plant body? (4.2) K/U
energy and allows
(a) tissues that store carbohydrates photosynthesis to occur
(b) tissues that manufacture nutrients (iii) contains enzymes that
(c) tissues that form the outer surfaces of plant help convert stored
parts energy into an easily
(d) tissues that transport materials throughout usable form
the plant (iv) consists of a fluid in
which all the organelles
4. Which type of animal cell is able to divide into
are suspended
different types of specialized cells? (3.2) K/U
(v) allows some substances
(a) stem cell to enter a cell while
(b) skin cell keeping other
(c) nerve cell substances out (2.1) K/U
(d) blood cell

If you think the statement is false, rewrite it to make it true. 11. Why do guard cells generally close the stomata
on plant leaves at night? (4.4) K/U
5. Both malignant and benign tumours are made

up of cells that have undergone uncontrolled 12. Name two places meristematic cells are found in
growth and division. (2.7) K/U plants. (4.2, 4.6) K/U
6. Ligaments attach skeletal muscle to bones. (3.8) K/U 13. Identify the main functions of each of the organ
systems below. (3.3, 3.4, 3.10) K/U
7. Most digestion occurs in the small intestine.

(a) digestive system
(3.3) K/U
(b) circulatory system
(c) nervous system
164 Unit B • Sustainable Ecosystems NEL

14. Do all single-celled organisms have the same 20. Your friend tells you that you should always
internal organization? Explain your answer using “warm up” your muscles before going for a long
examples. (2.1, 2.9) K/U run. (3.4, 3.8) A
15. You explain to your family that your body sheds (a) What do you think it means to “warm up”
millions of dead skin cells every day, and that muscles?
every day your body replaces these dead cells (b) Do you agree with your friend? Why or why
with new ones. Your little sister wants to know not?
why she doesn’t see piles of dead skin cells all 21. Scientists have developed tests to screen for a
over the floor of the house. How would you number of diseases. Some people say we should
answer her question? (2.3, 2.5) T/I C
use these tests to screen for as many diseases as
16. Muscle cells and white blood cells are two possible. Others believe overuse of these tests
different kinds of specialized cells. leads to unnecessary worry and expense because
(2.9, 3.4, 3.8)K/U T/i
many tests result in false positives. A false
positive result shows that a condition exists when
(a) Compare the movement and arrangement of
in reality it does not. Do you think we should or
these two kinds of cells.
should not test for as many diseases as possible?
(b) Describe how each of these cells’
Justify your answer. T/I
arrangement and movement supports their

functions. 22. Describe the process of cell division in your
own words. Use the following terms in your
17. List four choices you can make to reduce your
description: mitosis, interphase, cytokinesis,
risk of developing cancer. (2.7) C
prophase, anaphase, metaphase, and telophase.
18. Explain how the circulatory system uses (2.5)K/U C
diffusion to move the following gases through

23. Some plants produce flowers that bloom at
the body. (2.3, 3.4) T/I
night. These plants still need to reproduce by
(a) oxygen pollination. Explain how these night-blooming
(b) carbon dioxide flowers could attract animal pollinators in the
19. You have learned that plants with colourful dark. (4.1) A
flowers, such as dandelions, depend on insects 24. You are writing an article about the health
and other animals to spread their pollen, while benefits and risks of X-rays for your school
plants with small, drab flowers, such as grasses, newspaper. For your research, you will interview
rely on wind to spread their pollen. Which a dental technician. What are three questions
type of plant, a dandelion or a grass, would you you could ask him or her about the issue?
expect to produce more pollen? Justify your (2.7) C
answer. (4.1) T/I
NEL Unit B Self-Quiz 165

C
UNIT
Chemical
Reactions
OVERALL
Expectations
analyze a variety of
safety and environmental
issues associated with
chemical reactions,
including the ways in
which chemical reactions
can be applied to address
environmental challenges
investigate,
through inquiry, the
characteristics of
chemical reactions
demonstrate an
general principles of
chemical reactions,
and various ways to
represent them
BIG Ideas
Chemicals react with
ways.
Chemical reactions may
have a negative impact
challenges.
166 Unit C • Chemical Reactions NEL

Focus on STSE
ASPIRIN AND HEROIN

Got a headache? Like millions of other pain sufferers around the world, you may turn
to Aspirin for quick relief. Surprisingly, Aspirin was first made using the same chemical
reaction that produced heroin—a highly addictive and illegal narcotic.
The Bayer drug company first made Aspirin in the 1890s, but officials initially ignored the
new product. In 1898, Bayer chemists used the same reaction on morphine, a well-known
pain reliever at the time. Tests on the new product were impressive: it was a good pain
reliever and an even better cough remedy. Plus, it made the patient feel wonderful! Bayer
had invented heroin. Soon, a new Bayer cough syrup called “Heroin” was in drug stores
around the world. Shortly thereafter, reports about heroin addiction began to appear.
Public pressure forced Bayer to stop producing their heroin-laced cough syrup in 1913.
Heroin medications are no longer available. Bayer eventually recognized Aspirin’s
potential, and it is now widely used around the world as a painkiller.
The history of Aspirin and heroin teaches us the importance of thoroughly testing a new
product before making it available. It also shows how the chemicals we produce through
chemical reactions can have both costs and benefits.
1. List some costs and some benefits for each of the following substances. Consider
various perspectives (environmental, social, economical, and so on) as you think about
the costs and benefits. T /I A
(a) cleaning products (c) explosives (e) plastic
(b) salt (d) fuels (f) pesticides
2. Discuss the following questions with your partner. C A
(a) What other costs and benefits could you add to your table?
(b) Why might some chemical companies be willing to introduce new chemicals
into society and the environment without thoroughly testing them first?
(c) How can we maximize the benefits of chemicals and minimize the costs?

UNIT
LOOKING AHEAD
C
UNIT C
Chemical
Reactions
Chemicals and Chemicals and Acids and Bases

Their Properties Their Reactions
Scientists and engineers think about Chemicals are all around us, and can Acids and bases are important
the properties of the materials used in sometimes react in surprising ways. substances in our lives and in the
new products. environment.
UNIT TASK Preview
Acid Shock In the Unit Task, you will use the knowledge and skills
acquired in this unit to
In this unit, you will explore the chemical reactions that
• use a model to test whether the amount of acid released
chemicals undergo. Some reactions, like those involved in
by a melting solid varies as the solid melts
the formation of acid rain, have a negative impact on the
• suggest how chemical reactions can be used to prevent the
environment. But there is a good side to chemical reactions
loss of tadpoles in the stream during the first thaw of spring
as well. Chemical reactions can also be used to undo some
of the environmental damage caused by human activity. UNIT TASK Bookmark
In the Unit Task, you are part of a research team investigating
The Unit Task is described in detail on page 300. As you
tadpoles and frogs in a local stream. With each spring thaw, work through the unit, look for this bookmark and see how
the population of these organisms crashes and then recovers. the section relates to the Unit Task.
Preliminary research shows that the cause of their death is
the acidity of the melting snow. However, what remains a ASSESSMENT
mystery is the sudden drop in the population followed by a
gradual recovery. You will be assessed on how well you
Your task is to find the reason for this dip by using a model of • plan and conduct a test of the model
the situation. You will also suggest ways to prevent the loss • communicate the results of your test
of the tadpoles each spring. • evaluate your model
• justify your suggestion for preventing acid shock

PREREQUISITES
Concepts Skills
• Density and buoyancy • Writing chemical formulas
• Models of the atom • Observing properties of substances
• Classification of matter • Following safety precautions in the lab
1. Two cans of cola are placed in a tank of water. The can 5. In 1909, Ernest Rutherford fired positively charged alpha
containing regular cola sinks to the bottom of the tank and particles at a very thin sheet of gold foil. As he expected, the
the can containing diet cola floats to the surface. T/I majority of the particles passed through the foil. However, a
(a) Using the provided observations, compare the densities small number of alpha particles rebounded off the foil. Which
of the cans of cola with the density of water. of the following models of the atom best explains these
observations. Why? K/U
(b) Why might there be a difference in the densities of the
two colas? Model A Model B Model C
2. In your notebook, write the chemical formula (selected from The atom is a hard The atom is a The atom has a
the list on the right) of each of these substances. K/U sphere—like these positive sphere small, dense positive
billiard balls. with embedded core orbited by
(a) hydrogen H2O electrons—like electrons—like
(b) carbon dioxide NaCl raisins in a muffin. planets orbit a star.
(c) table salt CO2 
 

(d) hydrogen chloride H2 
 

  


  
(e) water O2
(f) oxygen HCl
3. List some of the properties of the substances shown in 6. (a) What fundamental particle inside the atom is responsible
Figure 1. K/U for the “hair-raising experience” shown in Figure 2?
UO-F04A-UBOS10SB.ai UO-F04B-UBOS10SB.ai
Ontario Science 10 SB Ontario Science 10 SB

0-17-635528-6 0-17-635528-6
(a) (b) FN FigureFN2
UO-F04A-UBOS10SB UO-F04B-UBOS10SB
CO CrowleArt CO
Group CrowleArt Group
Figure 1 (a) the gold in a ring (b) the water in a kettle
(b) Compare the three fundamental particles in an atom with
Deborah Crowle Deborah Crowle
Pass 1st pass Pass 1st pass
4. Draw Bohr-Rutherford diagrams to represent the following Approved respect to size, mass, charge, and location. K/ U
Approved
atoms: C Not Approved Not Approved

7. What safety precautions are being taken in Figure 3? K/ U
(a) lithium
(b) carbon
(c) chlorine
(d) argon
Figure 3
NEL UO-F06-UBOS10SB.ai Looking Ahead 169

CHAPTER
5 Chemicals and
Their Properties
KEY QUESTION: How do the properties of

compounds influence the technologies we develop,
the products we buy, and the world we live in?
This is an artist’s impression of a space elevator. We would require

materials with very special properties if we ever actually designed
and built it.
170 Chapter 5 • Chemicals and Their Properties NEL

UNIT C
Chemical
Reactions
Chemicals and Chemicals and Acids

Their Properties Their Reactions and Bases
KEY CONCEPTS
A substance’s chemical Changes can be classified We can classify pure

and physical properties as chemical or physical. substances by observing
and effects.
Ionic compounds are Molecular compounds Many consumer products

made up of positive and are made up of distinct are developed from
negative ions. molecules. petrochemicals.

nce 10 SB
6
ENGAGE IN
SCIENCE
Imagine stepping onto an elevator, pressing the button for

the 12 millionth floor, and going for the ride of your life.
Within an hour or two, the land beneath your feet and
the warmth of the Sun are replaced by the cold darkness
of space.
Getting people and cargo into space the old-fashioned
way—by using rockets—is expensive, dangerous, and
unreliable, so NASA engineers are looking for a better way.
Some believe that a space elevator may be the answer.
The space elevator would consist of a long cable—more
than three times as long as the diameter of Earth—firmly
attached to a point on Earth’s equator. At the other end,
about 40 000 km straight up, would be a large mass. As
long as this mass orbits Earth at the same rate as Earth
is rotating, the cable connecting it to Earth remains taut.
This would allow a “space-proof” elevator car to climb the
cable. But plenty of questions need to be answered before
we start putting this plan into action. For example, what
does this cable have to do, and where must it operate?
What physical and chemical properties should the
cable have? Are there any common substances
that have at least some of these properties? Do
these common substances have any properties
that make them unsuitable? Could the
substances be changed to overcome this
problem? And, perhaps most importantly,
how would this device impact our lives
and our planetary home?

WHAT DO YOU
THINK?
Na
1 The label on a chemical product provides all the

information you need to use the product safely.
4 Elements are more reactive and more hazardous than the
compounds that they form.
2 Recycling used motor oil is common practice.

Agree/disagree?
5 Bottled water is better for your health than tap water.
Agree/disagree?
3 Pool water is a much better conductor of electricity than

pure water.
6 Adding manufactured chemicals to the environment is a
bad thing.

FOCUS ON
WRITING
Writing a Summary
When you write a summary you condense a text by restating only the
main idea and key points in your own words. Personal opinions or
interpretations are not included. Use the summary below and the
information boxes to help you improve your writing.
WRITING TIP 5.5 Atoms and Ions The noble gases (Group 18) are stable due to their full outer orbits.
Sodium ions and fluoride ions are also stable. Why is this so? To explain
You have surely heard that we are all supposed to drink a lot of water: at the non-reactivity of sodium and fluoride ions, we can compare their
As you work through the chapter, least 2 L a day, and more if it is very hot or if we are exercising (Figure 1).
While this is generally good advice, too much water can actually be bad for
Bohr−Rutherford diagrams with that of neon. Neon is the noble gas that
is closest to sodium and fluorine on the periodic table. Again, we can use
your health. This was the conclusion reached during a scientific study of the Bohr−Rutherford model and the periodic table to help us predict the
look for tips like this. They will help runners in the 2002 Boston Marathon. During the race, 13 % of the runners
sampled in the study developed a condition known as hyponatremia.
formation of ions.
While we are considering the formation of ions from atoms, we do not
you develop literacy strategies. Symptoms of hyponatremia include disorientation and a loss of balance. The need to be concerned about the number of neutrons in the nucleus. We can
cause? They drank too much water during the race. Excess water can dilute therefore omit them from our Bohr–Rutherford diagrams for now.
the concentration of sodium in the blood to dangerously low levels—so low
that three runners were at risk of dying if left untreated. People have actually
Sodium
died from this condition. In the process of forming a sodium ion (which has a positive charge), a
When scientists refer to sodium in blood, they are not talking about sodium atom must react with another atom and lose one electron. The most
the shiny metal that reacts vigorously with water that you saw in Figure 2 likely electron to be lost is the one farthest from the nucleus: the single
in Section 5.4. Rather, they are referring to sodium ions. Many ions are electron in the third orbit. This farthest electron is the least tightly held to the
necessary for our health. Calcium and phosphorus ions are essential nucleus. As a result, the sodium ion has the same stable electron arrangement
components of bone; iron ions help carry oxygen around the body. Ions get as a neon atom: an outer orbit filled with eight electrons (Figure 2).
Figure 1 Is water harming this athlete? into our bodies in our food, and our bodies regulate their concentration.
How Do Atoms and Ions Differ?

As you learned in Section 5.4, an atom is an electrically neutral particle 11p+ 11p+ 10p+
ion a charged particle that results when with an equal number of electrons and protons. An ion is an atom that has
an atom gains or loses one or more become charged by gaining or losing electrons. For example, sodium atoms
electrons
lose one electron when they react with other atoms. Each resulting sodium
ion contains 11 positive charges (on protons) and only 10 negative charges Na Na+ Ne
Figure 2 The sodium atom loses its outermost electron to form an ion. The sodium ion is stable
(on electrons). Since it has one more positive charge than negative, the because its outer orbit is full, like that of neon.
sodium ion has an ionic charge of +1. As a result, chemists gave sodium ions
the chemical symbol Na1+ or Na+. (Note that the number 1 is usually omitted
Fluorine DID YOU KNOW?
in chemical symbols.) The other alkali metals also form ions with a single
Fluorine has one less electron than neon. Fluorine tends to react with Fluoride and Dental Cavities
positive charge. Fluoride ions help make tooth enamel
other atoms to gain one electron. This reaction gives it the same stable
Fluorine is one of the most reactive elements. When fluorine reacts, it strong. For decades, Canadians have
arrangement of electrons as neon. With this extra electron, the fluorine atom
tends to gain an electron from another atom to form a stable ion called been getting fewer dental cavities
now has 10 electrons and only 9 protons. It therefore becomes a fluoride ion
fluoride. Because the fluoride ion has one extra negative charge, it has an thanks to fluoride in their drinking
with a single negative ionic charge: F– (Figure 3). water. Some dentists have recently
ionic charge of −1. The chemical symbol of this ion is therefore F−. In fact,
noticed an increase in cavities among
all the halogens form ions with a single negative charge. So, sodium and young children, possibly because these
the other alkali metals (Group 1) lose an electron to form +1 ions, and the children are drinking bottled water,
halogens (Group 17) gain an electron to form –1 ions. without fluoride, rather than tap water.
9p+ 9p+ 10p+ GO TO NELSON SCIENCE
LEARNING TIP sodium, Na+ fluoride, F−
How to Represent a Charge on an Ion positive charge (protons) +11 +9
Chemists say that a magnesium ion has negative charge (electrons) −10 −10
–
a charge of +2, which is read as “plus
two,” but they write the ion as Mg2+
ionic charge +1 −1 F F Ne
(with the number first and the plus sign Figure 3 The fluorine atom gains one electron to become a fluoride ion, F–. Fluoride is stable
Why do we not find Na2+ or F2−: sodium ions with a +2 charge or fluoride because its outer orbit is full, like that of neon.
last). You will get used to this convention
as you see it used.
ions with a −2 charge? To understand why Na+ and F− are the only stable
ions that these elements form, we need to consider their Bohr−Rutherford
diagrams in relation to those of the noble gases.
188 Chapter 5 • Chemicals and Their Properties NEL NEL 5.5 Atoms and Ions 189
State the general topic

of the text.
Organize ideas and information
in the same order as in the
original text.
Notice that the examples,

descriptions, and explanations
that were in the original text
above have been left out.
Write one clear sentence
for each major point.
Write a closing sentence

that explains how the ideas
are connected together.

Properties and Changes 5.1
Chemistry is the study of the substances around us: what is in them, what
they do, and what they are used for. These substances can be the laboratory
chemicals that you will use in this unit. They can also be common things
like air, water, the food you eat, and the products you buy. An understanding
of chemistry teaches us how to change substances into new and useful
products. It also teaches us how to carry out these changes in socially and
environmentally responsible ways.
Physical and Chemical Properties

Does a “whiter than white” Hollywood smile appeal to you (Figure 1)? What
are the benefits of a whiter smile? Before you jump on the “whiter smile”
bandwagon, check your facts: research the pros and cons using reliable
sources. Consider these factors:
• Teeth are not naturally pure white. They can range in colour from
off-white to yellow. Furthermore, teeth naturally darken with age.
• Whitening your teeth does not make them healthier. Perfectly white teeth
are still subject to decay and gingivitis.
• Whitening procedures are not permanent and must be repeated Figure 1 Should we change the natural
periodically to keep the teeth white. colour of our teeth?
• According to the Canadian Dental Association, the long-term effects of
whitening have not been thoroughly researched.
There are two common ways of whitening teeth: surface whitening and
bleaching. In the case of surface whitening, a hard, abrasive material such
as baking soda is used to scrape surface stains off your teeth. Bleaching is a
chemical process that uses a reactive substance such as hydrogen peroxide,
and sometimes light.
We have just described baking soda as being a hard, abrasive material.
physical property a description of a
Hardness is an example of a physical property of matter. A physical property substance that does not involve forming
is a characteristic or description of a substance. Colour, texture, density, smell, a new substance; for example, colour,
solubility, taste, melting point, and physical state are other common physical texture, density, smell, solubility, taste,
properties. melting point, and physical state
Conversely, a chemical property is a characteristic behaviour that occurs chemical property a description of what
when the substance changes into something new. A useful chemical property of a substance does as it changes into one or
hydrogen peroxide is that it bleaches coloured substances. more new substance(s)
Other common examples of chemical properties are listed in Table 1. You

will learn more about these properties in this unit.
Table 1 Examples of Chemical Properties
Chemical property Example
reaction of an acid with a base Vinegar reacts with baking soda to produce carbon dioxide gas.
flammability Gasoline burns easily if ignited.
bleaching ability Hydrogen peroxide breaks down the pigment (colour) in hair.
corrosion Discarded batteries in landfill sites break down readily when

they come in contact with groundwater.
NEL 5.1 Properties and Changes 175

CITIZEN ACTION
Cadmium Cleanout
Nickel–cadmium or NiCd batteries were the first popular What Can You Do to Help?
rechargeable batteries for small appliances (Figure 2). They Search your home for small battery-powered appliances that are no
cannot be used indefinitely, though. They lose their ability to longer in use: old cellphones, portable phones, laptop computers,
hold their charge after many discharge-recharge cycles. Then cordless power tools, and electric toothbrushes. Check the battery
the batteries have to be replaced and disposed of. Some are for the “NiCd” symbol. If it is a NiCd battery, remove it and bring
recycled, but many NiCd batteries go to landfill sites. Over time, it to an authorized recycling centre or hazardous waste collection
the batteries’ toxic contents leak out. It is estimated that over depot.
50 % of the cadmium leaching from landfills into groundwater
comes from NiCd batteries. This is an environmental concern
because cadmium is highly toxic. It is a human carcinogen
and has been linked to lung, liver, and kidney disorders.
Furthermore, cadmium cannot be broken down into a safer
substance. The best we can do to reduce the danger is ensure
that cadmium does not leak into our air and water.
GO TO NELSON SCIENCE Figure 2 NiCd battery
WRITING TIP Physical and Chemical Changes

Summarizing Text A change that does not produce a new substance is called a physical change.
You can condense a text by combining
sentences and omitting examples.
Changes of state (including melting, evaporation, condensation, sublimation,
For example, “A change that does and dissolving) are examples of physical changes. Many physical changes
not produce a new substance is can be reversed, while others cannot. Dissolving sugar in water can easily
called a physical change. Changes of be reversed by evaporating off the water. The process of cutting logs into
state (including melting, evaporation,
lumber, however, cannot be reversed. Think of the physical changes that you
condensation, sublimation, and
dissolving) are examples of physical
have encountered today. Are they reversible?
changes.” can be shortened to The change that a substance goes through to produce a new substance
“Physical changes such as changes of (or more than one new substance) is called a chemical change. Table 2
state do not make new substances.” shows some of the clues indicating that a chemical change may have taken
place. Note, however, that these clues are not conclusive evidence that a
chemical change took place. For example, boiling water produces a gas; so
does mixing baking soda with vinegar. One of these events is a chemical
change; the other is not. Which is which? The only way to tell for sure that a
chemical change has taken place is to conduct further tests on the products.
If the products are different from the starting materials, then a chemical
change has taken place.
LEARNING TIP Many chemical changes, like a forest fire, cannot be reversed. However,
What It’s Like and What It Does some chemical changes can be reversed. For example, the design of
A property is like an adjective: it rechargeable batteries is based on a reversible chemical change. As you use
describes what the substance is like. the battery, the chemical change that generates electricity produces new
A change is like a verb: it describes substances. As the battery is recharged, these substances are changed back
what the substance is doing.
to the original chemicals.

Table 2 Possible Evidence of Chemical Changes
Visible change Example Visible change Example
A new colour appears. A solid material
(a precipitate) forms
in a liquid.
Heat or light is produced The change is (generally)

or absorbed. difficult to reverse.
Bubbles of gas are

formed.
RESEARCH THIS CHEMICALS FOR YOUR HAIR

4.A., 4.B.
Hair stylists consider the properties of hair dyes when advising
clients on the best product for them (Figure 3). Some hair dyes
are temporary, while others are permanent.
1. Research how temporary hair dyes work.
2. Research how permanent hair dyes work.
A. Using your researched information, classify the action of

temporary and permanent hair dyes as either chemical or
physical changes. Justify your answer. K/U T/I
B. Identify at least one disadvantage of each process. T/I A
C. If you were to dye your hair, which process would you use?
What concerns would you have about using this process? A Figure 3 This workplace uses chemistry.
NEL 5.1 Properties and Changes 177

IN SUMMARY
• Properties are either chemical properties (which • Changes are either chemical changes (in which
describe the ability of a substance to form one or a substance changes into one or more different
more different substances) or physical properties substances) or physical changes (in which a
(which describe a substance when it is not in the substance remains the same substance but
process of forming a new substance). changes its physical properties in some way).
CHECK YOUR LEARNING

1. (a) Describe an idea in the reading that is new to you. 5. Over time, crusty scales form on the heating coils inside
(b) How does this idea add to your understanding? K /U a kettle. These can be removed by covering the coils with
vinegar. As the scales disappear, bubbles of gas are observed.
2. Classify each of the following observations as an example of
Does this method of cleaning a kettle represent a physical or
either a chemical or a physical property. K /U
chemical change? Explain. K/U A
(a) Liquid nitrogen boils at −196 °C.
6. The solvents in house paint allow the paint to flow smoothly
(b) Propane, leaking from a damaged tank, ignites easily. onto a surface. Once paint is exposed to the air, these
(c) Silver jewellery tarnishes (darkens) in air. solvents evaporate and the paint dries. It is the job of a paint
(d) Spilled oil generally floats on the surface of water. chemist to select the most suitable solvents. A
(e) Meat darkens when it is heated on a grill. (a) What chemical and physical properties should these
(f ) Sulfur trioxide changes to sulfuric acid in the atmosphere. solvents have?
3. What kind of change is described in each of the following (b) What other characteristics should the ideal solvents have?
situations? Justify your answer. K /U 7. Auto mechanics sometimes use cola to remove the crusty
solid that forms around battery terminals. When the cola
(a) Air is often blended into ice cream to give it a lighter
comes in contact with this solid, bubbles of carbon dioxide
texture.
gas are observed. Is the cleaning of the battery terminal a
(b) When popping corn is heated, water inside the kernels physical or chemical change? Explain. K/U A
becomes a gas and expands. This creates enough
8. Drain cleaners often produce a great deal of heat as they
pressure to explode the kernel.
unclog drains. Is the action of drain cleaners a physical or
(c) A loud pop is heard when a lit match is placed at the chemical change? Explain. K/U A
mouth of a test tube containing hydrogen gas.
9. Adding vinegar to milk causes small lumps called curds
(d) Ethanol is used as an alternative source of energy to to form in the milk. Is this a physical or chemical change?
power vehicles. Explain. K/U A
(e) Geothermal energy from underground hot springs is used to 10. Describe two physical properties and one chemical property
heat water to turn turbines and produce electricity. of the materials used for dental braces. K/U
(f ) Some silver rings leave a green stain on your finger. 11. After having read this section, has your opinion of teeth
4. Figure 4 shows a warning label commonly found on chlorine whitening procedures changed? Why or why not? What other
bleaches. Is this hazard a result of a chemical property information should be considered before having your teeth
or a physical property of chlorine bleach? Justify your answer. K/U whitened? T/I
Figure 4 Warning label from a bottle of chlorine bleach

SCI ENCE OSSLT
Processing Hazardous Waste

Crusty jars of cleaners, unlabelled bottles of solvents, clogged Even single-use propane canisters can be recycled using
spray cans of insecticides, and rusted cans of paint lurk in the a process developed by Hotz Environmental. First, they remove
basements and garages of many Canadian homes. It is easy to any remaining propane in the canister using a vacuum system.
recycle or neutralize many of these substances at a hazardous Propane recovered from discarded propane canisters can be used
waste collection depot. Let’s follow a typical box of household to heat the facility. Then they safely puncture, cut, and recycle the
waste as it is processed. empty propane canisters as scrap metal.
When hazardous waste arrives at a hazardous waste We obviously need to recycle or neutralize hazardous
collection depot, it is first sorted into different classes of materials. waste. The technologies required to perform these tasks are well
The workers separate paints, oils, solvents, pesticides, batteries, developed and in place. Table 1 shows the recycling and disposal
medicines, and so on (Figure 1). processes for various kinds of hazardous waste. Hazardous
household wastes do not have to be an environmental threat.
How many Ontario households routinely bring their hazardous
waste to waste collection depots for disposal? Unfortunately, only
about 10 %. What can you do to make a difference?
Table 1 Treatment of Hazardous Waste Products
Hazardous waste Process
solvents • Flammable solvents are burned as

(e.g., paint thinner, fuel in high-temperature kilns used
adhesives, antifreeze) to produce cement.
automobile lead acid • Acids are neutralized.
batteries
• Plastic cases are recycled into new
Figure 1 About 50 % of the material that comes to a hazardous cases.
waste transfer station is paint and motor oil.
• Lead is refined and used to make
The sorted materials are then packaged and shipped to new batteries.
a hazardous waste processing company. There, the hazardous propane barbecue • Tanks are emptied and refurbished
materials are emptied from their original containers into large tanks into new tanks or converted to scrap
drums of similar materials. Different types of waste motor oils, for metal and recycled.
example, are mixed together into one large container. The oil is pesticides • Substances are chemically treated to
then shipped elsewhere for treatment and recycling. This process make them harmless.
is so effective that almost all the motor oil sold in Ontario is fluorescent lights • Toxic mercury in the lights is
recycled oil. (Figure 2) collected, purified, and reused.
Almost 85 % of the waste paint that you bring to the
hazardous waste depot can be recycled. Hotz Environmental
Services Inc. receives most of the waste paint in Ontario. At their
recycling facility in Hamilton, Hotz sorts waste paint first into
oil-based or latex paints. Each type of paint is then further
sorted and blended into eight different colour groups. A master
technician, affectionately known as the “brewmaster,” controls
the colour of each batch. Hotz then sells the paints to large
institutional users such as Canadian and foreign governments.
Figure 2 Fluorescent light
NEL 179
Identifying Physical and SKILLS MENU

Chemical Changes Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
As you have already learned, a chemical property describes the ability Controlling Variables Communicating
of a substance to react to form something new. When this happens, we
say that a chemical change has occurred.
In this activity, you will observe a number of physical and chemical
changes. As you classify these changes, you will identify specific
evidence of chemical change.
SKILLS HANDBOOK
Purpose Procedure 3.B.
To collect and use evidence to identify physical and 1. Prepare a data table in which to record your
chemical changes. observations during this activity.
SKILLS HANDBOOK 2. Put on your eye protection and lab apron.
Equipment and Materials 1.A., 1.B.
• eye protection Part A
• lab apron
CHANGE 1
• 2 test tubes
3. Add hydrochloric acid to a test tube to a depth
• test-tube rack
of about 2 cm.
• Bunsen burner
• utility stand with clamp 4. Add two 1 cm strips of magnesium ribbon to
• spark lighter the test tube. Check for evidence of change
• test-tube stopper occurring. Test the bottom of the test tube with
• laboratory scoop your hand for temperature changes. Record your
• warm water bath observations.
• thermometer (optional) 5. Place the test tube in a test-tube rack and wait
• dropper bottles of 30 s for the gas produced to push any air out
• dilute hydrochloric acid, HCl(aq) of the test tube.
• compressed
distilled water dangerously
• gas
dilute sodium hydroxide, reactive material NaOH(aq) CHANGE 2
• magnesium
flammable and ribbon, Mg(s)
biohazardous 6. Clamp the Bunsen burner to the utility stand
combustible
mpressed
• wooden
material
dangerously
splint infectious material
for stability.
s • copper(II)
reactive material sulfate, CuSO
poisonous and
infectious 4
material
(s) 7. Light the Bunsen burner with a spark lighter;
oxidizing
mmable and • steel
material wool
biohazardous
causing immediate
and serious toxic then light a splint from the burner flame.
mbustible
aterial • prepared test tube
infectious material
of lauric acid, C12H24O2(s)
effects
poisonous and poisonous and 8. Hold the burning splint near the mouth of the
dizing Hydrochloric
infectious material acid and
corrosive
material
causing immediate
sodium hydroxide are corrosive.
infectious material
causing other “acid + magnesium” test tube. Record your
aterial
Sodium hydroxide can effects
and serious toxic toxic cause blindness if splashed in observations.
effects
the eyes.
poisonous and 9. Dispose of the contents of the test tube as
rrosive Copper(II) sulfate is toxic and an irritant. Avoid skin and
infectious material
aterial causing other directed by your teacher.
eye contact. Wash any spills on the skin, in the eyes, or on
toxic effects
clothing immediately with cold water. Report any spills to 10. Rinse the test tube with tap water.
your teacher.
Use caution around the hotplate and water bath. Do not touch
surfaces that might be hot. This activity involves open flames.
Long hair should be tied back and loose clothing tucked in.

Part B Part C
CHANGE 3 CHANGE 6
11. Pour distilled water into a test tube to a depth of 20. Examine a test tube of lauric acid.
about 3 cm. 21. Place the test tube in a warm water bath. Wait
12. Add about 0.5 g of copper(II) sulfate (as much as until the substance in the test tube completely
about half an Aspirin tablet) to the test tube. liquefies.
13. Stopper and invert the test tube several times to 22. Remove the test tube and cool it in a stream of
mix its contents well. Record your observations. tap water until its contents solidify again. Record
your observations.
CHANGE 4
14. Remove the stopper. Add a small ball of steel Analyze and Evaluate
wool (about the size of an Aspirin tablet) to the (a) Classify each of the changes that you observed as
test tube (Figure 1). either chemical or physical. Use specific evidence
from your observation table to justify your
inference. T/I
(b) Which changes were the most difficult to

classify? Why? T/I
(c) Give one example, from your everyday life, of a

physical change that is
(i) reversible. Justify your inference.
(ii) not reversible. Justify your inference. A
Apply and Extend

Figure 1 Adding steel wool to copper(II) sulfate solution
(d) Identify one chemical change in this activity that
was reversible. What chemical could you add to
15. Stopper the test tube again and mix. reverse this change again? T/I
16. Allow the solids in the test tube to settle to (e) In Change 2, you may have heard a “pop” when
the bottom. Record your observations. the burning splint was inserted into the mouth
of the test tube. Name the gas produced in the
CHANGE 5 test tube. K/U
17. Remove the stopper. Add about 5 drops of (f) Plan an experiment to determine the factors that
sodium hydroxide solution to the test tube. could make the “pop” louder. Once your teacher
18. Slowly add drops of hydrochloric acid to the test approves your plan, conduct the experiment. T/ I
tube. Gently swirl the test tube after every couple

of drops. Continue adding dropwise until the
solid disappears. Record your observations.
19. Dispose of the contents of the test tube as
directed by your teacher.

5.3 Hazardous Products and Workplace Safety
While going about her normal cleaning duties one day, a school custodian
unintentionally mixed two cleaning solvents. Soon, irritating fumes of toxic
chlorine gas filled the room, making it difficult for her to breathe. She was
rushed to hospital, where she died later that evening.
This tragic accident prompted an investigation. School board officials
asked whether any other products used in schools were hazardous. One
of the first places they looked for this information was the WHMIS
information for each product.
What Is WHMIS?
Workplace Hazardous Materials Information System (WHMIS) provides
Canadian workers with information on the safe use of hazardous products
in their workplace. Employers must, by law, provide this information. The
information is conveyed in three ways: WHMIS product labels, materials
safety data sheets (MSDS), and worker training.
WHMIS Product Labels
WRITING TIP A WHMIS product label is your first alert that the product may be hazardous.
Writing a Summary There are two common types of product labels in most workplaces: supplier
Use the topic sentence to restate the labels and workplace labels. A supplier label is required on any hazardous
main idea of the text in your own words. material that is sold or imported to a workplace in Canada (Figure 1). A
For example, if the text says “A WHMIS
supplier label must always have a hatched border and must be written in both
product label is your first alert that the
product may be hazardous.”, you might English and French. It must also include the name of the product, any relevant
paraphrase this main idea by saying hazard symbol, the supplier’s contact information, and a reference to the
“WHMIS labels are warnings about MSDS. A workplace label must appear on all hazardous materials produced
dangerous products.” in a workplace or transferred to other containers within a workplace
(Figure 2). Workplace labels do not have to have a hatched border, but must
show the name of the product, information on safe handling, an MSDS
reference, and any relevant hazard symbol.
ACETONE ACÉTONE ACETONE

SEE MATERIAL SAFETY DATA SHEET FOR THIS PRODUCT
VOIR LA FICHE SINGALÉTIQUE POUR CE PRODUIT
DANGER! EXTREMELY FLAMMABLE. IRRITATES EYES. DANGER! EXTRÊMEMENT INFLAMMABLE. IRRITE LES
Flammable
PRECAUTIONS: Keep away from heat, sparks, and flames. YEUX. MESURES DE PRÉVENTION: Tenir à l’écart de la
Ground container when pouring. Avoid breathing vapours or chaleur, des étincelles, et des flammes. Relier les récipients à la
terre lors du transvasements. Éviter de respirer les vapeurs ou les • Keep away from heat,
mists. Avoid eye contact. Avoid prolonged or repeated contact
with skin. Wear splash-proof safety goggles or faceshield and butyl brumes. Éviter le contact avec les yeux. Éviter le contact prolongé répété avec sparks, and flames
la peau. Porter des lunettes contre les éclaboussures de produit chimique ou
rubber gloves. Use with adequate ventilation, especially in enclosed une visière de protection, et des gants en caoutchouc butyle. Utiliser avec
areas. Store in a cool well-ventilated area, away from incompatibles. suffisamment de ventilation surtout dans les endroits clos. Entreposer dans
FIRST AID: In case of contact with eyes, immediately flush eyes with • Wear butyl rubber gloves
un endroit frais, bien aéré, à l’écart des produits incompatibles.
lots of running water for 15 minutes. Get medical attention immediately. PREMIER SOINS: En cas de contact avec les yeux, rincer immédiatement and safety goggles
In case of contact with skin, immediately wash skin with lots of soap et copieusement avec de l’eau courante pendant 15 minutes. Obtenir des
and water. Remove contaminated clothing and shoes. Get medical soins médicaux immédiatement. En cas de contact avec la peau, laver
attention if irritation persists after washing. If inhaled, remove subject immédiatement la region affectée avec beaucoup d’eau et de savon. Retirer • Use with local exhaust
to fresh air. Give artificial respiration if not breathing. Get medical les vêtements et les chaussures contaminées. Si l’irritation persiste après le
lavage, obtenir des soins médicaux. En cas d’inhalation, transporter la ventilation
attention immediately. If swallowed, contact the Poison Control Centre.
victime à l’air frais. En cas d’arrêt respiratoire, pratiquer la respiration
Get medical attention immediately. artificielle. Obtenir des soins médicaux immédiatement. En cas d’ingestion,
ATTENTION! THIS CONTAINER IS HAZARDOUS WHEN EMPTY. contacter le Centre de Contrôle des Empoisonnements. Obtenir des soins
ALL LABELLED HAZARD PRECAUTIONS MUST BE OBSERVED. médicaux immédiatement. Material Safety Data
CanChemCo, Safeville, ON ATTENTION! CE RECIPIENT EST DANGEREUX LORSQU’IL EST VIDE.
CHAQUE INDICATION DE DANGER SUR LES ÉTIQUETTES DOIVENT ÊTRE Sheet Available
CCC OBSERVÉES.
Figure 1 This supplier label is on the container of acetone Figure 2 A workplace label is
when it is purchased. required when acetone is transferred
to other containers that the workers
use on site.
Materials Safety Data Sheet (MSDS)
A product label provides only a limited amount of safety information. For
more details, consult the materials safety data sheet (MSDS) that comes with
the product. This includes information about any hazardous properties, safe
handling and storage procedures, and what to do in case of an emergency.
Many manufacturers post MSDS information online. Workers should To look at online MSDS information,
consult the MSDS before using the product. GO TO NELSON SCIENCE
Worker Training
There are potentially hazardous products in almost every workplace. It is
important for everybody to understand the hazards. People who frequently To find out more about WHMIS
work with hazardous products must have special training. They must know education and training,
how to handle the products and what to do if something goes wrong. GO TO NELSON SCIENCE
RESEARCH THIS WHICH BLEACH IS BEST?

4.B., 4.C.8.
Accidents like the one mentioned above caused science teachers
to question whether it is safe to use chlorine bleach in the GO TO NELSON SCIENCE
science lab. Storing chlorine bleach in your school’s chemical

storage room is dangerous because the room also contains many A. Compare the hazards of the two types of bleach. T/ I
chemicals that could react with it. Is an oxygen-based bleach, B. Based on what you have read, is hydrogen peroxide safer
such as hydrogen peroxide, a safer alternative? to use? Why? T/I
1. Research the MSDS of 6 % hydrogen peroxide bleach. C. What extra information, if any, do you need before you can
2. Research the MSDS for chlorine bleach. say which is better overall? T/I A
IN SUMMARY
• WHMIS legislation requires employers to • Safety information is provided through product
provide information on the safe use of hazardous labels, MSDS, and worker training.
products used in the workplace.
CHECK YOUR LEARNING

1. Why is worker training an essential part of WHMIS? K/U 6. Consumers who buy cleaning products at the supermarket
2. When is a workplace label required? K/U rely on the product label for safety information. What
additional information is required if this product is to be
3. In which section(s) of the MSDS are the following properties
used in a workplace? A
listed? K/U
7. Give one example of a hazardous chemical that can be
(a) physical properties
used safely. K/U
(b) chemical properties
8. Give one example of a “safe” chemical that could, under the
4. Why do you think it is necessary to provide the preparation right conditions, be hazardous. K/U
date on MSDS? A
9. The phrase “the danger is in the dose” is sometimes used
5. Where might a consumer find MSDS information for when describing poisonous (toxic) chemicals. What does this
consumer products such as household bleach and paint mean? Include an example in your answer. T/I
thinner? A
NEL 5.3 Hazardous Products and Workplace Safety 183

5.4 Patterns and the Periodic Table
You have already learned that elements are pure substances that cannot be
broken down into simpler substances. You probably also know that the
element a pure substance that cannot be
broken down into simpler substances
periodic table is a powerful tool that chemists use to explain and predict
the properties of the elements (Figure 1).
1 18
1 H He
2 Period Group 13 14 15 16 17
2 Li Be B C N O F Ne
3 Na Mg Al Si P S Cl Ar
3 4 5 6 7 8 9 10 11 12
4 K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr
5 Rb Sr Y Zr Nb Mo Tc Ru Rh Pd Ag Cd In Sn Sb Te I Xe
6 Cs Ba La Hf Ta W Re Os Ir Pt Au Hg Tl Pb Bi Po At Rn
7 Fr Ra Ac Rf Db Sg Bh Hs Mt Ds Rg Uub Uut Uuq Uup Uuh Uus Uuo
Figure 1 The elements of the

Ce Pr Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb Lu
periodic table can be classified as
metals (shown in blue), non-metals Th Pa U Np Pu Am Cm Bk Cf Es Fm Md No Lr
(pink), and metalloids (green).
Table 1 Summary of Properties of Metals and Non-Metals Table 1 provides a summary of the
general properties of metals and non-
Property Metals Non-metals
metals. Note that hydrogen, H, has its
example nickel, Ni bromine, Br own unique colour. This is because it
state at room temperature solid solid, liquid, or gas has some properties in common with
the metals in the first column. However,
lustre shiny dull it lacks many of the characteristic
malleability generally malleable brittle (if solid) physical properties of metals at room
temperature. We cannot really classify
electrical conductivity conductors insulators
hydrogen as a metal, so we group it on
its own.
period a row of elements in the
periodic table
Chemical Periods and Groups
The periodic table also categorizes elements into periods and groups. Each
group a column of elements in the
periodic table with similar properties row of elements on the periodic table is called a period. Each column is a
alkali metals the elements (except
group of elements with similar properties. Four of the best-known groups of
hydrogen) in the first column of the elements are listed below:
periodic table (Group 1) • The Group 1 elements (with the exception of hydrogen) are the alkali
alkaline earth metals the elements in metals. These elements are soft, highly reactive metals (Figure 2).
the second column of the periodic table
(Group 2)
• The Group 2 elements are light, reactive alkaline earth metals.
halogens the elements in the seventeenth • The Group 17 elements are the halogens. They are one of the most
column of the periodic table (Group 17) reactive groups on the periodic table.
noble gases the elements in the • The Group 18 elements are noble gases. Unlike the halogens, the noble
eighteenth column of the periodic table gases are so stable that they rarely react with any other chemical.
(Group 18)

Figure 2 Lithium, sodium, and
potassium react at different rates with
water to produce flammable hydrogen
gas. The potassium reaction is so
vigorous that the hydrogen gas ignites.
nucleus
Atomic Structure
Why do elements behave so differently? The answer to this question lies in p n0
the structure of atoms. Scientists developed a simple model of the atom to n0 p

explain the properties of elements. In this model, most of the mass of the
atom is concentrated in an extremely small, dense, positively charged core Figure 3 Most of the atom’s volume is
called the nucleus (Figure 3). empty space. Most of the atom’s mass
is concentrated in the nucleus. The
Atoms are made up of three kinds of subatomic particles (Table 2). nucleus takes up only about 1/100 000
Table 2 Subatomic Particles of the volume of an atom.
Proton Neutron Electron C05-F10-UBOS10SB.ai
electrical charge positive neutral negative

symbol p+ no e−
location nucleus nucleus orbit around the nucleus DID YOU KNOW?
Feeling Dense?
The number of protons in the nucleus is called the atomic number of the If you could somehow squeeze all
element. For example, because carbon contains sixOntario
protons in its nucleus,
Science 10 SB the space out of your body’s atoms
its atomic number is 6. The elements of the periodic table are arranged in
0-17-635528-6 you would be smaller than a penny.
order of increasing atomic number. Atoms are electrically
FN neutral, with equal
C05-F10-UBOS10SB However, that “penny” would be as
heavy as you are right now.
numbers of protons and electrons. CO CrowleArt Group
Deborah Crowle
Electron Arrangements and the Pass 2nd pass
Approved
Bohr−Rutherford Diagram Not Approved
The Bohr−Rutherford diagram of the atom is a useful way of representing the Bohr−Rutherford diagram a model
arrangement of electrons around the nucleus for the first 20 elements. In representing the arrangement of electrons
Bohr−Rutherford diagrams, each electron orbit is shown as a ring around the in orbits around the nucleus of an atom
nucleus. Evidence indicates that only a limited number of electrons can
occupy each orbit. The first orbit can hold up to a maximum of two electrons.
The second and third orbits can each hold a maximum of 8 electrons. Elements WRITING TIP
with atomic numbers above 18 must have some electrons in the fourth orbit. Writing a Summary
Because all atoms are electrically neutral, the total number of electrons in these Write one clear sentence for each major
orbits must match the number of protons in the nucleus. Recall that this is point. For example, if summarizing the
Bohr–Rutherford diagrams, use separate
only a model of the atom. The actual behaviour of electrons is much more
sentences to explain the orbit of each
complicated, but this model meets our needs for now. electron.
We can use this model and the periodic table to help us predict the atomic
structures and properties of elements. Let’s use Bohr−Rutherford diagrams for
hydrogen, helium, lithium, and fluorine to illustrate this idea of electron orbits.
NEL 5.4 Patterns and the Periodic Table 185
An atom of lithium is sometimes represented as Li-7. This means that
2p 2p
+ + this particular atom has a mass number of 7. Recall that the mass number is
1p+1p+ the total number of protons and neutrons. Lithium atoms always have three
2n02n0
protons, so this atom must also have four neutrons in its nucleus. To balance
the charge of the three protons, three electrons must be orbiting the nucleus.
H H HeHe The first orbit can hold up to two electrons. Since the third electron cannot
fit in the first orbit, it has to go in a second orbit (Figure 4).
Our atomic model suggests that the second orbit can accommodate
3p+3p+ 9p+9p+ up to eight electrons. So, as you proceed from element to element in the
4n04n0 10n10n
0 0
second period, the number of electrons in the second orbit increases by
one until there are eight: the maximum number. Therefore, fluorine has
seven electrons in its second orbit and neon has eight in its second orbit.
Li Li F F After neon, another orbit is required to accommodate the next set of eight
Figure 4 Bohr−Rutherford diagrams of electrons. The outermost electron of sodium, therefore, is in the third orbit
hydrogen (H-1), helium (He-4), lithium
(Li-7), and fluorine (F-19)
(Figure 5). Notice that the period, or row, number of an element tells you
how many electron orbits the atoms have. You can predict that elements 19
and 20, which are in the fourth row, have electrons in a fourth orbit. Beyond
this orbit, the model of the atom gets more complicated, but you need not be
concerned about these larger atoms for this course.
Electron Arrangements and Reactivity 2p2p

2p
+ +
+
The noble gases are known for their stability. They 2p

2p
+ 0
2p
2n
+0 +
2n
2n2n 0
0 0
11p + are so stable that they almost never react with other 2n2n0
12n0 elements. Why are they so stable? From experimental He

He
He
He
evidence, chemists infer that the outer electrons of He
He
an element are responsible
for the element’s reactivity.
Na Since the noble gases all 3p3p
3p+ +
+
10p
10p
10p
+ +
+
Figure 5 Bohr−Rutherford diagram of 3p
3p3p
4n
+ 0+
+0 0 10p+ 0
10p
10n
10p+0 +
sodium (Na-23). have completely filled outer 4n
4n4n 0 0 10n
10n
10n
0
0 0
4n4n 0 10n
10n 0
orbits, we can conclude
that there is something
MATH TIP
LiLi
Li Ne
Ne
Ne
Ratio
particularly stable about Li
LiLi Ne
Ne
Ne
A ratio is a comparison of quantities. full outer orbits (Figure 6).
The ratio of boys to girls in Ontario is As you will see in the
approximately 1:1. The ratio of hydrogen following sections, the
atoms to oxygen atoms in a water 11p
11p
11p + +
+
18p
18p
18p
+
+ +
stability of filled outer 11p
11p
12n
+ 0+
18p+ 0
18p
22n +
molecule is 2:1. Ratios are usually 11p
12n
12n
+
0 0 18p
22n
+
22n
0 0
expressed using the smallest possible
electron orbits is important 12n
12n
12n0 0
0
22n0 0
22n
22n0
whole numbers. to understanding how

elements combine to form
compound a pure substance composed compounds. Compounds NaNa
Na Ar
Ar
Ar
Na
NaNa Ar
ArAr
of two or more elements in a fixed ratio are substances made up
of two or more elements
in a fixed ratio.
Figure 6 Lithium (Li-7),
19p
19p
19p
+ +
+
sodium (Na-23), and potassium
19p+ 0+
19p
20n
19p+0 0 (K-39) are reactive because
20n
20n
20n 0 0
20n
20n 0 of their single outer electron.
Helium (He-4), neon (Ne-20),
and argon (Ar-40) are stable
because they have filled outer
KK
K electron orbits.
K
KK
While the noble gases are very stable, the elements at the other side of
the periodic table—the alkali metals—are very reactive. Observations show
that every alkali metal reacts with water (Figure 2). Chemists theorize that To see the reactions of some of
alkali metals are highly reactive because each of their atoms contains one the alkali metals with water,
electron in its outer orbit. GO TO NELSON SCIENCE
IN SUMMARY
• Elements are arranged in the periodic table in • The number of electrons in the outer orbit affects
order of atomic number (the number of protons the reactivity of an element.
in the nucleus). • Bohr−Rutherford diagrams illustrate the numbers
• Electrically neutral elements have the same of protons, neutrons, and electrons in an atom
number of electrons as protons in each atom. and the arrangement of the electrons.
• Elements in vertical columns (groups) in the
periodic table all have the same number of
electrons in their outer orbits.
CHECK YOUR LEARNING

1. What information on the periodic table lets you predict the 6. Look at the physical appearance of the elements in
number of electrons in an atom? K/U Figure 7. K/U
2. Compare metals and non-metals in terms of their (a) Classify each element as either a metal or a non-metal.
(a) state at room temperature (b) Identify one unusual physical property of element (iv).
(b) electrical conductivity (c) Which of the elements are likely to conduct electricity?
(c) lustre
(d) number of electrons in their outermost orbit K/U
3. Refer to the periodic table to name and write the symbols for
the following elements: K/U
(i) (iii)
(a) the halogen of the second period
(b) the alkaline earth metal in the fifth period
(c) the noble gas with the smallest atomic number
(d) the non-metal in the fifth period with seven outermost
electrons
(e) the alkali metal of the fourth period
(f) the metal of the third period with three outermost electrons (ii) (iv)
(g) the unreactive gas of the second period Figure 7 Elements at room temperature
4. Sketch the Bohr−Rutherford diagrams for the following
elements: nitrogen (N-14), aluminum (Al-27), chlorine (Cl-35), 7. Compare the number of outermost electrons
and magnesium (Mg-24). T/I C
(a) within a period
5. Imagine that chemists discovered a new element with atomic
(b) within a group K/U
number 119. T/I
8. Why are atoms electrically neutral? K/U
(a) Use the periodic table to predict what chemical family this
element would belong to. 9. Many high schools have banned the use of potassium.
What property of potassium may have led to this ban? T/I
(b) How many outer electrons would an atom of this element
have?
(c) Predict one physical property and one chemical property of
this element.
NEL 5.4 Patterns and the Periodic Table 187

5.5 Atoms and Ions
You have surely heard that we are all supposed to drink a lot of water: at
least 2 L a day, and more if it is very hot or if we are exercising (Figure 1).
While this is generally good advice, too much water can actually be bad for
your health. This was the conclusion reached during a scientific study of
runners in the 2002 Boston Marathon. During the race, 13 % of the runners
sampled in the study developed a condition known as hyponatremia.
Symptoms of hyponatremia include disorientation and a loss of balance. The
cause? They drank too much water during the race. Excess water can dilute
the concentration of sodium in the blood to dangerously low levels—so low
that three runners were at risk of dying if left untreated. People have actually
died from this condition.
When scientists refer to sodium in blood, they are not talking about
the shiny metal that reacts vigorously with water that you saw in Figure 2
in Section 5.4. Rather, they are referring to sodium ions. Many ions are
necessary for our health. Calcium and phosphorus ions are essential
components of bone; iron ions help carry oxygen around the body. Ions get
Figure 1 Is water harming this athlete? into our bodies in our food, and our bodies regulate their concentration.
How Do Atoms and Ions Differ?

As you learned in Section 5.4, an atom is an electrically neutral particle
ion a charged particle that results when with an equal number of electrons and protons. An ion is an atom that has
an atom gains or loses one or more become charged by gaining or losing electrons. For example, sodium atoms
electrons
lose one electron when they react with other atoms. Each resulting sodium
ion contains 11 positive charges (on protons) and only 10 negative charges
(on electrons). Since it has one more positive charge than negative, the
sodium ion has an ionic charge of +1. As a result, chemists gave sodium ions
the chemical symbol Na1+ or Na+. (Note that the number 1 is usually omitted
in chemical symbols.) The other alkali metals also form ions with a single
positive charge.
Fluorine is one of the most reactive elements. When fluorine reacts, it
tends to gain an electron from another atom to form a stable ion called
fluoride. Because the fluoride ion has one extra negative charge, it has an
ionic charge of −1. The chemical symbol of this ion is therefore F−. In fact,
all the halogens form ions with a single negative charge. So, sodium and
the other alkali metals (Group 1) lose an electron to form +1 ions, and the
halogens (Group 17) gain an electron to form –1 ions.
LEARNING TIP sodium, Na+ fluoride, F−

How to Represent a Charge on an Ion positive charge (protons) +11 +9
Chemists say that a magnesium ion has negative charge (electrons) −10 −10
a charge of +2, which is read as “plus ionic charge +1 −1
two,” but they write the ion as Mg2+
(with the number first and the plus sign
Why do we not find Na2+ or F2−: sodium ions with a +2 charge or fluoride
last). You will get used to this convention
as you see it used.
ions with a −2 charge? To understand why Na+ and F− are the only stable
ions that these elements form, we need to consider their Bohr−Rutherford
diagrams in relation to those of the noble gases.

The noble gases (Group 18) are stable due to their full outer orbits.
Sodium ions and fluoride ions are also stable. Why is this so? To explain
the non-reactivity of sodium and fluoride ions, we can compare their
Bohr−Rutherford diagrams with that of neon. Neon is the noble gas that
is closest to sodium and fluorine on the periodic table. Again, we can use
the Bohr−Rutherford model and the periodic table to help us predict the
formation of ions.
While we are considering the formation of ions from atoms, we do not
need to be concerned about the number of neutrons in the nucleus. We can
therefore omit them from our Bohr–Rutherford diagrams for now.
Sodium
In the process of forming a sodium ion (which has a positive charge), a
sodium atom must react with another atom and lose one electron. The most
likely electron to be lost is the one farthest from the nucleus: the single
electron in the third orbit. This farthest electron is the least tightly held to the
nucleus. As a result, the sodium ion has the same stable electron arrangement
as a neon atom: an outer orbit filled with eight electrons (Figure 2).
11p+ 11p+ 10p+
Na Na+ Ne
Figure 2 The sodium atom loses its outermost electron to form an ion. The sodium ion is stable
because its outer orbit is full, like that of neon.
Fluorine DID YOU KNOW?

Fluorine has one less electron than neon. Fluorine tends to react with Fluoride and Dental Cavities
other atoms to gain one electron. This reaction gives it the same stable Fluoride ions help make tooth enamel
strong. For decades, Canadians have
arrangement of electrons as neon. With this extra electron, the fluorine atom
been getting fewer dental cavities
now has 10 electrons and only 9 protons. It therefore becomes a fluoride ion thanks to fluoride in their drinking
with a single negative ionic charge: F– (Figure 3). water. Some dentists have recently
noticed an increase in cavities among
young children, possibly because these
children are drinking bottled water,
without fluoride, rather than tap water.
9p+ 9p+ 10p+ GO TO NELSON SCIENCE
–
F F Ne
Figure 3 The fluorine atom gains one electron to become a fluoride ion, F . Fluoride is stable
–
because its outer orbit is full, like that of neon.
NEL 5.5 Atoms and Ions 189

Aluminum
The Bohr−Rutherford diagram of aluminum shows that aluminum has
three outer electrons (Figure 4(a)). To have a stable outer orbit (like a noble
gas) aluminum could—in theory—either gain five electrons or lose three.
Experimental evidence shows that metals tend to lose electrons, while
non-metals tend to gain them. The result is an aluminum ion with ionic
charge +3: Al3+ (Figure 4(b)).
13p+ 13p+
(a) Al (b) Al3+

Figure 4 (a) An aluminum atom has three electrons in its outer orbit. (b) Losing these electrons
leaves the aluminum ion positively charged.
Sulfur
Sulfur has six electrons in its third orbit (Figure 5(a)). To achieve a stable
electron arrangement, a sulfur atom reacts with other atoms and gains two
electrons. When it does, sulfur forms an ion with the chemical symbol S2−
(Figure 5(b)). This is called a sulfide ion.
Sulfur can also form compounds without forming ions. You will learn
more about these compounds in Section 5.11.
DID YOU KNOW?

16p+ 16p+
Hydrogen
Hydrogen can form both positive and
negative ions. It can gain one electron
to fill its only orbit, forming an ion with
a charge of −1. More often, though, (a) S (b) S2–
hydrogen loses its only electron to
form an ion with a charge of +1. Figure 5 (a) A sulfur atom has six electrons in its outer orbit. (b) Filling the outer orbit with
electrons makes the sulfide ion negatively charged.
Naming Ions
cation a positively charged ion We can classify ions as cations—those that have positive charges, and
anion a negatively charged ion anions—those that have negative charges.
The name of a positive ion is the same as the name of the element:
LEARNING TIP sodium forms sodium ions, for example. The name of a negative ion is
Cations and Anions determined by adding “ide” to the stem of the name. For example, oxygen
Remember “cation” contains the letter forms oxide ions and phosphorus forms phosphide ions.
“t,” which looks like a + sign; anions
are negatively charged.

T RY THIS IONS AND THE PERIODIC TABLE
SKILLS HANDBOOK
SKILLS: Analyzing, Communicating 3.B., 10.
Some elements gain or lose electrons to form stable ions. Is there 1 18
1 2
a pattern to how elements form ions? In this activity you will 1 H+
explore how some of the first 20 elements in the periodic table 2 13 14 15 16 17
3 4 5 6 7 8 9 10
form ions. In the process, you will learn how to predict the ionic 2 F–
charge of elements based on their location on the periodic table.
11 12 13 14 15 16 17 18
1. Figure 6 represents part of the first four rows of the periodic 3 Na+ Al3+ S2–
table. The atomic numbers of the first 20 elements are
19 20
indicated. Symbols are also provided for the ions of five 4
elements. Draw a Bohr–Rutherford diagram for the ion
formed by each of the remaining elements in Figure 6. Figure 6
(Omit the elements that are greyed out.) K/U C
C. How can the ionic charge be predicted from the location of
2. Copy Figure 6 into your notebook. From your Bohr–Rutherford
the element on the periodic table? T/I
diagrams, determine the chemical symbol of each ion and
record in your periodic table. C A D. Use your answer in C to predict the chemical symbol of the
ion of each of the following elements: T/I
A. Describe the patterns or similarities that exist within a period
and within a group for the Bohr–Rutherford diagrams. T/I A (a) barium, BaC05-F51-UBOS10SB.ai
(b) iodine, I (c) rubidium, Rb (d) arsenic, As
B. Describe the patterns or similarities that exist within a period E. You were not required to determine the ions for the
and within a group for the ionic charges. T/I A greyed-out cells in Figure 6. Why? T/I
IN SUMMARY
• Ions are atoms that have gained or lost electrons. • Cations have fewer electrons than protons and
Many ions have complete outer orbits, so they are therefore have a positive charge.
stable. • Atoms and ions can be represented by
• Anions have more electrons than protons and Bohr−Rutherford diagrams.
therefore have Ontario Science
a negative charge.10Anions
SB often • Some ions—in the appropriate concentrations—
have “ide” at the end of their names.
0-17-635519-7 are necessary for good health.
FN C05-F51-UCOS10SB
CO Crowle Art Group
CHECK YOUR LEARNING
Deborah Crowle
1. Compare a sodiumPassion to 1st pass 5. List three atoms or ions that have the same number of
(a) a sodium atom Approved(b) a neon atom K/U electrons as each of the following:
Not Approved
2. (a) Draw the Bohr−Rutherford diagram (without neutrons) (a) S2− (b) Al3+ (c) P3− (d) Kr (e) Cs+ T/I
for an atom of each of the following elements: lithium, 6. Suppose that a new element has been made. Chemical tests
oxygen, calcium, and phosphorus. show that it is an alkaline earth metal. T/I
(b) Draw the Bohr−Rutherford diagram (without neutrons) for (a) Predict how many electrons there will be in the outer orbit.
the ion formed by each of the elements in (a). (b) Predict the ionic charge of the ion that this element forms.
(c) Write the chemical symbol for each ion. 7. Justify why these ions do not exist under normal conditions. A
(d) Name the noble gas with the same electron arrangement (a) K2+ (b) O2−
as each ion. T/I C 8. (a) What is the trend in the ionic charges of the elements in
3. Distinguish between a cation and an anion. K/U Groups 1, 2, and 13 of the periodic table?
4. Name these ions. K/U (b) What is the trend in ionic charges of the elements in
(a) Mg2+ (b) S2− (c) Fe3+ (d) Br− (e) N3− Groups 15 to 17? K/U
9. What type of drink would you recommend for endurance
runners who suffer from hyponatremia? Why? K/U
NEL 5.5 Atoms and Ions 191

5.6 Ionic Compounds
As you have already learned, sodium is a very reactive metal. Chlorine is
a poisonous gas. When these elements mix, a violent reaction occurs. The
compound that results, however, is a safe and familiar one: sodium chloride
To see a video of this reaction, or table salt (Figure 1). What happens to the sodium and chlorine atoms as
GO TO NELSON SCIENCE this reaction takes place?
(a) (b) (c) (d) (e)

Figure 1 This series of photographs shows what we can actually see during the formation of sodium
chloride. (a) Sodium metal (b) Chlorine gas (c) Sodium and chlorine reacting vigorously (d) The product:
sodium chloride (e) We recognize sodium chloride, in a more familiar container, as table salt.
Making Ionic Compounds from Elements

In the previous section, you saw that metals tend to lose electrons to form
positive ions called cations. Conversely, non-metals tend to gain electrons to
form negatively charged ions called anions. When a metal such as sodium
reacts with a non-metal such as chlorine, both processes occur (Figure 2).
The non-metal atoms take electrons from the metal atoms. This electron
transfer is possible because the metal’s hold of its outermost electrons
is weak. At the same time, the non-metal attracts the metal’s electrons
strongly. The resulting ions all have the same stable, filled outer electron
arrangements as the nearest noble gas.
Figure 2 A model of the formation of

sodium chloride. (a) A chlorine atom
fills its outermost orbit by taking the 11p
11p++ 17p
17p++ 11p
11p++ 17p
17p++
third-orbit electron from a sodium atom.
(b) The stable sodium and chloride
ions attract each other to form
––
sodium chloride. (a) Na
Na Cl (b) Na
Na++ Cl
C
Cll
Once they form, positive and negative ions from different elements attract
ionic compound a compound made up of each other to form compounds. Compounds that are made up of positive
one or more positive metal ions (cations)
and negative ions are called ionic compounds. For example, sodium chloride
and one or more negative non-metal
ions (anions)
(table salt) is an ionic compound made up of sodium ions, Na+, and chloride
ionic bond the simultaneous strong
ions, Cl−. For ionic compounds that contain only two elements, one element
attraction of positive and negative ions is always a metal and the other is a non-metal. The attraction that holds
in an ionic compound oppositely charged ions together in a compound is called an ionic bond.

Large numbers of sodium and chloride ions join together to form an
ionic crystal. This crystal consists of alternating sodium and chloride ions,
in a ratio of 1:1, extending in three dimensions (Figure 3). This is why
the chemical formula for sodium chloride is NaCl. There is no individual
“NaCl” particle: the compound always consists of many sodium ions and
chloride ions held together in a crystal.
–
Cl– Na+ Cl– Na+ Cl
–
Na+ Cl
–
Na+ Figure 3 (a) Under the microscope,
Na+ Cl
– sodium chloride appears as cubes.
Cl– Na+ Cl– Na+ Cl (b) A crystal of sodium chloride could
– Na+ contain billions of alternating sodium
Na+ Cl
–
Na+ Cl and chloride ions. However, the number
Na+ Cl– Na+ Cl
–
of sodium ions is always equal to the
Cl–
number of chloride ions, so their ratio
(a) (b)
is 1:1.
Some ionic compounds are soluble in water. When they dissolve, they To view an animation of the
separate into ions. Water molecules surround each ion as it leaves the crystal dissolving process,
(Figure 4). This prevents ions from rejoining the crystal. H H
H H O H H
O
C05-F23-UBOS10SB.ai
HO H H OH
H O H
HO OH
H are supposed
We aren’t sure if the large spheres Na+ to be Hchloride or sodium?
O O
Na+
The references for the sodium chlorideHstructure (C05-F23 and C05-F24) aren’t consistent.
– O O H
Cl– Na Cl Na+ Cl–
+
+ – H O Na+ OH H
H
Cl– Na Cl Na Cl + H
+ –
H O O
H H O H OH H
Cl–+ Na
Cl–+ Na
Na Cl–+ Na Cl–+ NaCl– O H
–
Na+ O H H H H H H
Na+ Cl Na Cl +
– + O
Cl
Cl Na– O
– –+
H H H
Cl + Na
–+
Cl–+ Na
–
Na Cl Na
+ Cl
– Na +
Cl – Na H
Cl –+ Na–+
–+
Cl Na Cl Na–
+ Cl Cl O
Cl–+ Na
–
Na H O H
+ Cl
– + Cl Na+ H 17p+
Na
OntarioNaScience
–+ Na –+ 10 –SB
+ Na
+ Cl–+ H O
Cl– Na O H H O H H O
Cl Cl
Na
Cl
Na
0-17-635528-6 + Na+ Cl H
–
HO OH H H H H HO
Cl– Na Cl
–
+ Cl – H O OH H Cl – H HO
Cl– Na
+
FN Cl– Na C05-F23-UBOS10SB H H Cl – H
CO CrowleArt Group H H Cl
OH H Cl –
H O
H
sodium chloride crystal sodium cations
Deborah Crowle OH H H H H OH
sodium chloride crystal sodium
+ cations
chloride anions
Pass 1st pass O H H O H H O
sodium chloride crystal + chloride
sodium anions
cations O 13p+ 17p+
Approved + chloride anions H H
O
Figure 4 When ionic substances dissolve, their positive and negative ions are pulled away
Not Approved
from the crystal by water molecules. The water molecules arrange themselves around ions in
particular ways: the oxygen atoms of water molecules are attracted to positive ions and the
hydrogen atoms are attracted to negative ions. Al Cl
The element aluminum can also react with chlorine gas. Each aluminum
17p+
atom, however, has three electrons to lose, while each chlorine atom can
accommodate only one extraC05-F24-UBOS10SB.ai
electron. How can this be resolved? Each
C05-F24-UBOS10SB.ai
aluminum atom reacts with three chlorine atoms (Figure 5). The result is
C05-F24-UBOS10SB.ai Cl
an ionic compound called aluminum chloride, a common ingredient in Figure 5 Aluminum transfers its three
many antiperspirants. When dissolved in water (or sweat), the aluminum outer electrons to chlorine atoms to
ions and the chloride ions separate, just like the ions in sodium chloride. form aluminum chloride.
ience 10 SB
NEL 5.6 Ionic Compounds 193
ience 10 SB
28-6
ience 10 SB
28-6
Properties of Ionic Compounds
Due to the strength of the ionic bond, ionic compounds are hard, brittle
electrolyte a compound that separates solids with high melting points. Most ionic compounds are also electrolytes,
into ions when it dissolves in water, which means that they dissolve in water to produce a solution that conducts
producing a solution that conducts
electricity. As ionic compounds dissolve, their ions are pulled apart by water
electricity
molecules. The presence of these ions improves the electrical conductivity of
water (Figure 6). Pure water is a poor conductor of electricity, but tap water,
lake water, and seawater are good conductors because they contain ions
from a variety of sources, such as minerals. That is why it is essential to stay
out of swimming pools or lakes during a lightning storm.
+ –
Cl–
Na+
Cl–
Figure 6 Sodium chloride is an

electrolyte because it separates into
ions when it dissolves. A solution can
conduct electricity only if it contains
ions that are free to move.
T RY THIS TESTING FOR ELECTROLYTES

SKILLS: Observing, Analyzing, Communicating SKILLS HANDBOOK
1.B., 2.B.
Electrolytes in our water come from a variety of sources. Some 3. Use the dropper to transfer about 2 mL of distilled water
are added naturally as water flows over rocks containing minerals. into the palm of your hand. Let the water sit in your hand
Others, such as compounds containing fluoride ions, are artificially for about 10 s.
added to drinking water to help prevent tooth decay. In this 4. Test the electrical conductivity of the liquid in your hand.
Ontario
activity, you will compare the electricalScience 10ofSB
conductivity distilled
0-17-635528-6 The electrodes of the tester should only lightly touch
water before and after it contacts your skin.
your skin. Avoid any open sores or cuts.
Equipment and Materials: low-voltage conductivity tester;
FN C05-F26 -UBOS10SB 5. Wash your hands.
small beaker; dropper; distilled water
A. Why does the conductivity of distilled water change after it
COconductivity testers in Creative
Use only low-voltage Freelancers
this activity. has been in contact with your skin? T/I
Sam
1. Add 5 to 10 mL of distilled water to a clean, dry Laterza
beaker. B. Why is there a risk of electrical shock when handling
electrical equipment with wet hands? T/I
2. Test the electrical conductivity of distilled water.
Pass Final
Approved
194 Chapter 5 • Chemicals and Their Properties
Not Approved NEL
UNIT TASK Bookmark
You can apply what you learned in this section about the properties of ionic compounds
to the Unit Task described on page 300.
IN SUMMARY
• Elements (a metal and a non-metal) can react to • Most ionic compounds have high melting points
form an ionic compound. and are hard, brittle electrolytes: they dissolve in
• During the reaction, the non-metal atoms pull water to form solutions that conduct electricity.
electrons away from the metal atoms. • Most ionic compounds form three-dimensional
• The ratio of metal ions to non-metal ions in crystals, with many of each kind of ion in a fixed
an ionic compound depends on the number of ratio held together by their opposite charges.
electrons each ion gains or loses.
CHECK YOUR LEARNING

1. What kinds of elements combine to form ionic 9. Silver reacts with sulfur to form a compound that has two
compounds? K/U silver ions for every sulfide ion. Write the chemical formula
2. Look at each of the following pairs of elements. Predict for the compound. K/U
whether each pair would form ionic bonds. Explain your 10. Producing sodium chloride (table salt) using the reaction in
reasoning. K/U Figure 1 on page 192 is impractical and expensive. Sodium
(a) Mg, O (b) Zn, Cl (c) C, F (d) H, F chloride can be extracted from seawater. How could this be
3. Magnesium and chlorine react to form an ionic done using a common renewable energy source? A
compound. K/U C 11. (a) Compare the electrical conductivity of pure water, tap
(a) Which element is the metal and which is the non-metal? water, and seawater.
(b) Draw a Bohr−Rutherford diagram (without neutrons) (b) Why is there a difference? T/I
for each element.

12. A penny and a dime inserted into a pickle and connected in
(c) How many electrons must the atoms of each element an electric circuit can generate enough electricity to power
gain or lose to become a stable ion? a small electric buzzer. Suggest why a pickle is better for
(d) Sketch a diagram to show the transfer of electrons this activity than a raw cucumber. A
that occurs when these two elements react. Your
13. Table 1 shows the melting points of four Group 1
diagram should be similar to Figure 2 on page 192.
chlorides. T/I C
4. Repeat question 3 for lithium and oxygen. K/U C
Table 1 Melting Point Data
5. Explain why two non-metallic elements are not likely to
Period number
form ionic bonds. K/U Compound Melting point (°C) of metal ion
6. When each of these compounds dissolves in water, what
NaCI 801
ions are released and in what ratio? T/I
(a) NaF (b) Li3N (c) FeCl3 (d) K2O KCI 775
7. Element X has three electrons in its outermost orbit. RbCI 718

Element Y has seven electrons in its outermost orbit. K/U T/I CsCI 645
(a) Classify each of these elements as metal or a
non-metal. (a) Copy and complete Table 1 in your notebook.
(b) What is the chemical formula of the ionic compound (b) Draw a line graph of the melting point against the
formed by these elements when they react together? period number of each metal ion.
(Use X and Y as the chemical symbols.) (c) Chemists do not know much about the very rare
8. Dissolved ions are surrounded by water molecules. Group 1 element francium, or its compounds. Extend
Explain how the water prevents the ions from forming the line of your graph in (b) to predict the melting point
a solid again. K/U of francium chloride.
NEL 5.6 Ionic Compounds 195

5.7 Names and Formulas of Ionic Compounds
Blue vitriol, cinnabar, Glauber’s salt (Figure 1). These unusual names may
sound like the ingredients in a magical potion. However, they are actually
the traditional names of three chemicals commonly found in chemistry
labs. These names were developed centuries ago, when few chemicals
were known. Today, the number of known chemicals has grown to over
10 million! To keep track of them all, chemists have developed a systematic
method of naming chemicals. The International Union of Pure and Applied
Chemistry (IUPAC) is the organization that decides how chemicals will be
(a) named. A common naming system allows scientists around the world to
communicate with each other without misunderstandings.
Naming Ionic Compounds

Many ionic compounds are made up of two elements: a metal and a
non-metal. It is therefore logical that the names of ionic compounds have two
parts. The first part refers to the metal ion in the compound and the second
part to the non-metal ion. Remember that the name of the metal ion remains
the same as the name of the neutral metal atom (Table 1) but that the ending
of the name of the second ion—the non-metal—changes to “ide.”
(b)
Table 1 Examples of Naming Ionic Compounds
Metal Metal ion Non-metal Non-metal ion Compound
magnesium magnesium ion chlorine chloride ion magnesium chloride
aluminum aluminum ion oxygen oxide ion aluminum oxide
Table 2 gives the ion names of common non-metals found in ionic

compounds. Remember, from Section 5.5, that all non-metals form negatively
charged ions: anions.
Table 2 Names and Charges of Common Anions
Name of element Name of ion Ionic charge Ion symbol
fluorine fluoride ion −1 F−
(c) chlorine chloride ion −1 Cl −
bromine bromide ion −1 Br −

Figure 1 Some chemicals have been
known for centuries, such as (a) blue iodine iodide ion −1 I−
vitriol, (b) cinnabar, and (c) Glauber’s
salt. At the time of their discovery, there oxygen oxide ion −2 O2 −
was no organized way of naming them.
sulfur sulfide ion −2 S2 −
nitrogen nitride ion −3 N3 −
phosphorus phosphide ion −3 P3 −

Writing Chemical Formulas
of Ionic Compounds
When elements form ionic compounds, electrons move from metal atoms
to non-metal atoms. The resulting charged ions attract other ions of the
opposite charge until the charges balance out. The compound that forms is
electrically neutral. In other words, in the compound, the total number of
positive charges must equal the total number of negative charges. This basic
idea helps us determine the chemical formulas of ionic compounds. LEARNING TIP
To determine the chemical formula of an ionic compound, you must first The Zero-Sum Rule
figure out the correct number of ions required to produce an electrically The sum of all charges in the chemical
formula of the compound must
neutral compound. The compound’s total ion charge (the negative and equal zero. This model may help you
positive ion charges added together) must equal zero. Here is a strategy understand this idea. It shows that two
that will help. chloride ions (triangles) are needed to
“complete” the rectangle. The rectangle
represents the smallest number of ions
SAMPLE PROBLEM 1 Chemical Formula of an Ionic Compound that must combine to give an overall
charge of zero. The ratio of ions in this
What is the chemical formula of magnesium chloride?
rectangle is the same as the ratio of
Step 1 Write the symbols of the elements, with the metal on the left-hand side and ions in the chemical formula of the
the non-metal on the right-hand side. compound.
Mg Cl MgCl
MgCl22
Step 2 Add the ionic charge of each ion above the symbol.
+2 −1 –– ––
ClCl ClCl
Mg Cl
Mg
Mg2+2+ Mg
Mg2+2+
Step 3 Determine how many ions of each type are required to bring the total charge
to zero. The sum of all charges in the compound must equal zero. –– ––
ClCl ClCl
Total ionic charge: 1(+2) + 2(−1) = 0
Mg Cl
Step 4 Write the chemical formula using the (red) coefficients in front of each bracket
as subscripts.
Mg1Cl2
Step 5 Do not write the subscript “1” in chemical formulas because the symbol itself
represents one ion.
The chemical formula for magnesium chloride is MgCl2
SAMPLE PROBLEM 2 Chemical Formula of an Ionic Compound

What is the chemical formula of aluminum oxide (Figure 2)?
Step 1 Write the symbols of the metal and non-metal elements.
Al O
Step 2 Add the ionic charge of each ion above the symbol.
+3 −2
Al O
Step 3 Determine the number of ions required to bring the total charge to zero.
2(+3) + 3(−2) = 0
Al O
Figure 2 A layer of aluminum oxide forms a
The chemical formula of aluminum oxide is Al2O3.
protective coating over the metal underneath.
NEL 5.7 Names and Formulas of Ionic Compounds 197

The Crisscross Method for Determining Formulas
WRITING TIP Now that you understand the meaning of the symbols and numbers in
Writing a Summary chemical formulas, try using a shortcut known as the “crisscross” method.
Sometimes a text describes a process
or procedure, such as the Crisscross SAMPLE PROBLEM 3 Using the Crisscross Method
Method. In your summary, organize
ideas and information in the same order What is the chemical formula of magnesium chloride?
as in the original text.
Step 1 Write the symbols of the elements and their ionic charges.
Mg2+ Cl−
Step 2 Crisscross the numbers of the ionic charges so that they now become subscripts.
Mg2+ Cl−
MgCl2
The chemical formula of magnesium chloride is MgCl2.
Practice
What is the chemical formula of aluminum sulfide?
Occasionally, this method of finding the chemical formula of a compound

gives you an answer with two identical subscripts. For example, the chemical
formula of aluminum nitride appears to be Al3N3. You know that the
chemical formula of an ionic compound is always the simplest possible ratio
of the ions, so Al3N3 must be simplified to AlN.
Elements with Multiple Ionic Charges

Chemists have discovered, through experiments, that there are two stable
cations of iron: Fe2+ and Fe3+. These ions are named like other cations, except
that Roman numerals in rounded brackets are used to indicate the ionic charge
(not the number of ions) of the metal. The Fe2+ ion is called “iron(II) ion,” and
the Fe3+ ion is called “iron(III) ion.” Because of this, iron may form two different
compounds with a particular anion. For example, there are two different
compounds of iron and chlorine: FeCl2 and FeCl3. Each compound has its own
distinct properties: solid FeCl2 is light green, while FeCl3 is yellowish-brown
Figure 3 Because iron has two
different ionic charges, it makes two
(Figure 3). Several other metals, besides iron, form multiple cations. In each
different compounds with chlorine: case, two or more compounds can be formed with the same anion (Table 3).
iron(II) chloride (left) and iron(III)
Table 3 Names and Multiple Ionic Charges for Common Metals
chloride (right).
Chemical symbol Chemical symbols
Metal of element of ions Names of ions
Cu+ copper(I)
copper Cu
Cu2+ copper(II)
Fe2+ iron(II)
iron Fe
Fe3+ iron(III)
Pb2+ lead(II)
lead Pb
Pb4+ lead(IV)
Mn2+ manganese(II)
manganese Mn
Mn4+ manganese(IV)
Sn2+ tin(II)
tin Sn
Sn4+ tin(IV)

Naming Compounds Involving Elements with Multiple
Ionic Charges
Naming compounds containing elements with multiple ionic charges involves LEARNING TIP
the same procedure as before. You must also determine the ionic charge of Specifying the Charge
the metal so that you can include it in the name. For example, FeCl2 is called The name of CuCl2 is written “copper(II)
iron(II) chloride because the ionic charge of iron is +2. Similarly, FeCl3 is chloride.” This is read as “copper two
chloride.” Remember that the “two”
called iron(III) chloride because the ionic charge of iron is +3.
refers to the charge on the copper ion,
not to the number of ions of copper in
SAMPLE PROBLEM 4 Considering Multiple Ionic Charges the compound.
Write the chemical name of CuBr2. Note that copper could have either of two ionic
charges (Table 3).
Step 1 As you do not know whether the charge on the copper ion is +1 or +2, use
x to represent this unknown value. Remember that the charge on all the ions
must total zero. Each bromide ion has a charge of –1, so the total charge of
bromide ions is 2(–1).
CuBr2
x + 2(–1) = 0
x = +2
The ionic charge of copper in this compound is +2.
Step 2 Write the name of the compound. Remember that Roman numerals are
included only if the metal has more than one ionic charge.
The name of CuBr2 is copper(II) bromide.
Practice
What is the chemical name of PbO2?
Whenever you have to write the chemical name of a compound containing

a metal, first check whether the metal has more than one ionic charge.
T RY THIS TWO SHADES OF IRON

SKILLS HANDBOOK
SKILLS: Observing, Analyzing 1.B., 3.B.
In this activity, you will compare the properties of the two ionic 3. Add about 100 mL of distilled water to the 250 mL flask.
forms of iron. To do this, you will use two different compounds of 4. Add the 1.0 g of iron(II) sulfate to the water in the flask.
iron: iron(III) chloride and iron(II) sulfate. The chloride and sulfate
5. Swirl to dissolve the solid. Record your observations.
ions arecompressed
colourless and dodangerously
not react with oxygen. This means
that thegasiron ions alone are responsible
reactive material for all observable colour 6. Continue swirling gently for about 1 min. Compare the colour
differences/changes. of your solution with that of the iron(III) chloride solution.
flammable and
biohazardous
Equipment
combustible
infectious material
material and Materials: eye protection; lab apron; 100 mL
7. Follow your teacher’s instructions for the disposal of the
graduated cylinder; 250 mL Erlenmeyer
poisonous and flask; laboratory scoop; solutions. Clean up your work area and wash your hands.
infectious material
oxidizing
scale; weighing
material paper; 500 mL
causing Erlenmeyer
immediate flask containing A. Swirling the solution allows oxygen from the atmosphere
and serious toxic
iron(III) chloride solution;effects
distilled water; 1.0 g iron(II) sulfate to enter the solution and react with the chemicals in the
poisonous and solution. What evidence of a chemical change did you
Both
corrosiveiron compounds arematerial
infectious irritants. Wash any spills on the observe? K/U
material causing other
skin, in the eyes, ortoxiconeffects
clothing immediately with plenty of
B. Suggest a possible explanation for the evidence you
cold water. Report any spills to your teacher.
observed. C
2. Observe the solution of iron(III) chloride that your teacher has
prepared. Record your observations.
NEL 5.7 Names and Formulas of Ionic Compounds 199

IN SUMMARY
• When writing chemical formulas of ionic • Ionic compounds are named with the metal
compounds, the number of each ion must first and then the non-metal. The ending of the
balance the positive and negative charges non-metal’s name is changed to “ide.”
so that the overall charge is zero. • Some metals can form ions with different
• The numbers of the ions in the chemical formula charges. In the name of an ionic compound
of an ionic compound must be in the simplest containing one of these metals, the charge is
ratio. The subscript “1” is not included in a written as Roman numerals in brackets after the
chemical formula. name of the metal.
CHECK YOUR LEARNING

1. (a) Describe at least one idea or skill in the reading that 9. Copy and complete Table 4. K/U
you think you will need to practise. Table 4 Chemical Names and Formulas of Ionic Compounds
(b) How do you plan to improve with this idea or skill?
Name Formula
(c) Discuss your plans with your teacher. C
(a) iron(II) bromide

2. Name each of these compounds: K/U
(a) CaF2 (b) manganese(IV) oxide
(b) K2S (c) tin(IV) chloride

(c) Al2O3 (d) copper(I) sulfide
(d) LiBr (e) iron(III) nitride
(e) Ca3P2 (f) copper(II) oxide
3. Determine the chemical formula of the ionic compound (g) PbCl2
that forms when each of these pairs of elements react. K/U
(h) Fe2O3
(a) K and Br (b) Ca and O (c) Na and S
(i) SnS
4. Which is the correct chemical formula of tin(IV) oxide:
SnO2 or Sn2O4? Why? K/U (j) Cu3P2
5. Copper forms two different compounds with bromine. One (k) CaBr2
compound contains one copper ion for every bromide ion. (l) CuF2
The other contains two bromide ions for every copper
(m) K3P
ion. Name and write the chemical formulas of these two
compounds. K/U (n) Cu3P
6. Why must the net charge on any ionic compound always
equal zero? K/U 10. Magnetite is a substance composed of only iron
ions and oxygen ions. It has the chemical formula Fe3O4
7. Write the chemical formulas for the following
(Figure 4). Given that iron has only two common ionic
compounds: K/U
charges, suggest an explanation for this formula. T/I
(a) calcium chloride
(b) aluminum bromide
(c) magnesium sulfide
(d) lithium nitride
(e) calcium nitride
8. The blue compound shown in Figure 1(a) was traditionally
called blue vitriol or bluestone. The systematic name for
this compound is copper(II) sulfate. What is the advantage
of a systematic naming system for chemicals? A Figure 4

5.8
Chlorine Conclusions SKILLS MENU
What could be more refreshing than a cool dip in Researching Decision
a backyard pool on a hot summer’s day? Ideal pool Alternatives Evaluating
water contains just the right amount of disinfecting Analyzing the Issue
chemicals: enough to kill any micro-organisms in the
water but not enough to cause skin or eye irritation SKILLS HANDBOOK
or harm the environment. Gather Information 4.A., 4.C.
For many pool owners, chlorine is the disinfectant Work in pairs or small groups to brainstorm and
of choice. It is inexpensive, readily available, and very research answers to the following questions. C A
effective. However, chlorine has a downside: it smells • What are the health risks of a poorly maintained
unpleasant, bleaches hair, and dries skin. High pool?
concentrations can cause respiratory problems. • What are the most popular methods of keeping
outdoor pools clean?
The Issue • What are the potential impacts of discarded pool
The homes in a new housing development will all have water on the sensitive ecosystem?
backyard pools. The development backs onto an Consider where you can find more information. If
environmentally sensitive wetland (Figure 1). you are doing an Internet search, what keywords can
you use? Do you know somebody who has first-hand
experience of maintaining a pool?
Identify Solutions
Two of the most common methods of disinfecting
pools involve introducing chlorine to the water. These
two methods are
• adding chlorine-containing solutions or soluble
solids directly to the water
• producing small amounts of chlorine directly in
the water using a process called electrolysis. This
technology is commonly used in “saltwater pools.”
Figure 1 The disinfection system for these pools should be friendly to
both the environment and the wallet. Decide whether there is another alternative that
should be considered. T/I
Your environmental engineering firm has been

contracted to recommend the best means of keeping Make a Decision
the new backyard pools clean and free of micro-
What disinfection method would you recommend for
organisms. Your solution must satisfy at least three
the pools in this development? What criteria did you
criteria: it should be affordable, safe, and have as
use to decide? T/I C A
little impact on the environment as possible. You will
present your recommendation to a joint meeting of
the local community council and the developer.
Communicate
Complete a report that will be presented to a
Goal meeting of the developer and the town council.
The report should examine the advantages and
To recommend a swimming pool disinfection system.
disadvantages of at least two systems of
disinfection. The report should conclude with
your recommendation. C A

5.9 Polyatomic Ions
sodium nitrite Processed foods contain a lot of sodium, mostly from sodium chloride, NaCl
preservative and (table salt). Sodium chloride enhances the flavour and extends the shelf-life of
colour enhancer food.
Other additives in processed foods also contribute to your daily sodium
intake (Figure 1). For example, sodium phosphate helps bind together the
meat in a hot dog. Sodium nitrite acts as a preservative and flavour enhancer
and gives hot dogs their pinkish colour. There is some concern about adding
compounds containing nitrite ions to foods. Nitrite ions react with substances
in the digestive tract to form nitrosamines in the body. Nitrosamines are
sodium phosphate
chemicals that have been linked to certain types of cancer in laboratory
binding agent
sodium erythrobate animals. An occasional hot dog is unlikely to make you ill, but a steady diet
preservative of processed meats is not recommended.
Figure 1 Hot dogs contain many Nitrites are not always bad news, however. Research suggests that sodium
chemical additives.
nitrite may help protect heart tissue after a heart attack or transplant. Also,
nitrites and a related group of compounds called nitrates are important plant
nutrients. They occur naturally in soil and are manufactured and spread
3– as fertilizer on many crops. You can see how difficult it is to make a simple
judgment about whether a chemical is good or bad.
O The sodium compounds in Figure 1 are ionic compounds similar to the
others you have learned about in this chapter. Sodium phosphate, for example,
O P O is a white solid, relatively stable, and an electrolyte. The chemical formula
for this compound is Na3PO4. Its cation is sodium, but its anion, phosphate,
O (PO4)3–, is an example of a polyatomic ion (Figure 2). A polyatomic ion is an
ion that consists of a stable group of several atoms acting together as a single
Figure 2 The phosphate ion is made charged particle. The ionic charge of a polyatomic ion is shared over the entire
up of four oxygen atoms bonded to a ion rather than being on just one atom.
central phosphorus atom. Table 1 lists some of the most common polyatomic ions and their ionic
charges. Note that all the ions are anions except ammonium. Also, note that
all the anion names end in “ate” except nitrite and hydroxide.
polyatomic ion an ion made up of more
than one atom that acts as a single Table 1 Formulas and Charges of Common Polyatomic Ions
particle
C05-F29-UBOS10SB.ai
Name of polyatomic ion Ion formula Ionic charge
nitrate ion NO3– −1
nitrite ion NO2– −1
hydroxide ion OH– −1

DID YOU KNOW?
hydrogen carbonate ion HCO3– −1
Not Just for Baking
Sodium hydrogen carbonate (baking
(also called bicarbonate ion)
soda) is an extremely versatile chlorate ion ClO3– −1
substance. It can substitute for
toothpaste if you run out, it soaks carbonate ion CO32– −2
up odours from your shoes and
refrigerator, it is a good abrasive sulfate ion SO42– −2
cleaner, and it is even useful to help phosphate ion PO43– −3
relieve insect bites and sunburn.
ammonium NH4+ +1

Naming Compounds Involving
Polyatomic Ions
The strategy for naming polyatomic compounds uses the same steps that
you learned in the previous section. The only difference is that the anion
is named according to the polyatomic ion rather than the names of the
individual elements.
SAMPLE PROBLEM 1 Naming Compounds Involving

Polyatomic Ions
Write the name of the compound Na2CO3. (Sodium does not form multiple ions.)
Step 1 Write the name of the metal and check whether it has more than one ionic
charge. Sodium always has a charge of +1.
Step 2 Write the name of the compound.
The name of Na2CO3 is sodium carbonate.
Practice
What is the name of Ca(OH)2?
As the Practice example indicates, several polyatomic ions can be

associated with each cation. This is indicated by placing brackets around
the polyatomic ion and writing the subscript outside the brackets.
Some metal ions have more than one charge. Check this before naming
the compound. In compounds containing these ions, use a Roman numeral
to indicate the charge.
SAMPLE PROBLEM 2 Naming Compounds Involving

Polyatomic Ions
Write the name of the compound Fe(NO3)3.
Step 1 Write the name of the metal and check whether it has more than one possible
ionic charge. If it does, proceed to step 2. If not, proceed to step 3.
Iron has two possible ionic charges: +2 and +3.
Step 2 Determine the ionic charge of the metal.
Fe (NO3)3
x + 3 (−1) = 0
x = +3
The ionic charge of iron in this compound is +3, indicated by the Roman
numeral “III.”
Step 3 Write the name of the compound, with the Roman numeral if necessary.
The name of Fe(NO3)3 is iron(III) nitrate.
Practice
What is the name of CuSO4?
NEL 5.9 Polyatomic Ions 203

Writing Formulas Involving Polyatomic Ions
You can apply the rules that you have already learned for writing ionic
compound formulas to polyatomic compounds. Remember to treat the
polyatomic ion as one unit. Consider the following Sample Problem.
SAMPLE PROBLEM 3 Writing Formulas for Compounds

Containing Polyatomic Ions
What is the chemical formula of sodium phosphate?
DID YOU KNOW? Step 1 Write the symbols of the each ion, beginning with the cation (metal).
The Phosphate Fiasco Na PO4
In the 1960s, laundry detergents
Step 2 Write the ionic charges above each ion.
included phosphates. The phosphate-
laden wastewater was flushed into +1 −3
lakes and streams. Phosphates are Na PO4
an important plant nutrient. The
Step 3 Determine how many ions of each type are required to give a total charge of zero.
increased dose of nutrients caused
unnaturally rapid growth in aquatic Total ionic charge: 3(+1) + 1(−3) = 0
plant populations. As these plants died Na PO4
and decomposed, much of the oxygen Three sodium ions balance the −3 charge of the phosphate ion.
in the water was used up, killing many
aquatic animals. To avoid the problem, Step 4 Write the chemical formula using the coefficients as subscripts.
chemical engineers redesigned Na3PO4
detergents to work effectively without
The formula of sodium phosphate is Na3PO4.
phosphates.
Note that sodium phosphate contains three sodium ions and one
phosphate ion (Figure 3).
The “crisscross method” also works for compounds with polyatomic
Na+ 3–
ions. Sample Problem 4 shows how. Note that, if a coefficient is required for
O the polyatomic ion, first put curved brackets around it and then write the
Na+ P
subscript outside of the final bracket.
O O
O
Na+ SAMPLE PROBLEM 4 Writing Formulas for Compounds
Containing Polyatomic Ions
Figure 3 Sodium phosphate, Na3PO4, What is the chemical formula of copper(II) nitrate?
consists of three sodium ions and Step 1 Write the symbol of each ion, with its charge.
one phosphate ion, PO43−. When this
compound dissolves, these four ions Cu2+ (NO3)–
separate. However, the phosphate ion Step 2 Crisscross the numbers of the ionic charges so that they now become
remains intact. subscripts.
Cu2+ (NO3)–
C05-F30-UBOS10SB.ai Step 3 Write any necessary subscripts after the brackets around each ion. (Remember,
you do not need to write “1” as a subscript, so no brackets are necessary.)
Cu (NO3)2
The formula of copper(II) nitrate is Cu(NO3)2.
Practice
What is the chemical formula of ammonium carbonate?

IN SUMMARY
• Polyatomic ions are made up of more than one • Consider the polyatomic ion as a single unit
atom, with a charge spread over the entire ion. when writing the chemical formula for a
• Polyatomic ions are present in many natural compound that includes a polyatomic ion. If
and artificial compounds. They are used as the compound contains more than one of the
food additives, fertilizers, and cleaners. polyatomic ion, write curved brackets around the
ion and write a subscript outside the brackets.
CHECK YOUR LEARNING
1. Name the polyatomic ion in each of the following 6. Write the chemical formulas of the following compounds.
compounds and name the compound. (Watch for metals Note that some of them contain polyatomic ions. K/U
with more than one possible ionic charge.) K/U (a) calcium sulfate (e) calcium chlorate
(a) KNO3 (found in gun powder) (b) ammonium chloride (f) tin(II) hydroxide
(b) Ca(OH)2 (an ingredient in plaster) (c) copper(I) carbonate (g) iron(IV) phosphate
(c) CaCO3 (in chalk, limestone, and antacid medicines) (d) barium sulfide (h) aluminum nitride
(d) CuSO4 (a fungicide) 7. Explain why the chemical formula for calcium hydroxide,
(e) KOH (used to make soap) Ca(OH)2, is not written as CaO2H2. K/U
(f) Fe(NO3)3 (used in water treatment) 8. Most ionic compounds are made up of a metal cation
and a non-metal anion. Look at Table 1 on page 202 and
(g) Cu(ClO3)2 (used to colour fireworks)
identify an exception to this rule. K/U
(h) (NH4)3PO4 (an ingredient in bread dough)
9. When writing the chemical formula of an ionic compound,
2. Write the chemical formula for each of the following which ion is always written first? K/U
compounds: K/U
10. Copy Table 2 into your notebook. Complete your table
(a) potassium nitrate (used to colour fireworks purple)
using the example provided as a guide. K/U
(b) barium sulfate (given prior to an X-ray of the intestine)
Table 2 Identifying Ions
(c) ammonium nitrate (a common ingredient in fertilizer)
Compound Cation(s) Anion(s)
(d) aluminum sulfate (used in preparing pickles)
(e) potassium chlorate (an explosive) Fe(OH)3 1 Fe3+ 3 OH–
(f) copper(II) nitrate (used to colour ceramics) Cu(NO3)2
(g) lead(II) sulfate (found in car batteries) Al2(SO4)3
(h) tin(II) phosphate (used in the dyeing of silk) (NH4)2CO3
3. What is the most common ending for the name of K3PO4
(a) a polyatomic anion?
11. The names “sodium chloride” and “sodium chlorate” sound
(b) an anion made up of only one element? K/U
similar. However, these compounds are very different.
4. Well water in agricultural areas is often monitored for Sodium chloride enhances the flavour of food while sodium
nitrate ions because of possible health effects. Where can chlorate is a toxic herbicide. For each compound, write
nitrate contamination come from on a farm? A (a) the chemical formula
5. Write the names of the following compounds. Note that (b) the chemical formula of the anion
some of them contain polyatomic ions. K/U (c) the chemical formula of a compound that this anion
(a) SnCO3 (e) K2S makes with calcium K/U
(b) CaCl2 (f) (NH4)2SO4 12. Describe one strategy you can use to reduce the amount
(c) Fe(OH)3 (g) Mn(ClO3)2 of salt in your diet. A
(d) MnO2 (h) PbI2
NEL 5.9 Polyatomic Ions 205

5.10 Molecules and Covalent Bonding
Nitrous oxide, N2O, is a colourless, sweet-smelling gas that dentists
sometimes use to relax nervous patients (Figure 1(a)). You would not,
however, want to inhale nitrogen dioxide, NO2. This reddish-brown toxic
gas is produced in the atmosphere from pollutants emitted in automobile
exhaust. Nitrogen dioxide is a dangerous part of the smog that hangs over
large cities in the summer (Figure 1(b)). People with asthma and other
respiratory problems often find it more difficult to breathe on smoggy days.
Figure 1 (a) Inhaling nitrous oxide,

laughing gas, helps dental patients
relax. (b) Nitrogen dioxide is the gas
responsible for the reddish-brown colour
of smog over large cities during the (a) (b)
summer.
Pollution control technology in modern cars helps reduce nitrogen

dioxide emissions. A catalytic converter, attached to the car’s exhaust system,
To find out more about the converts nitrogen dioxide into harmless nitrogen and oxygen. The Ontario
Ontario Drive Clean Program, Drive Clean Program requires that most cars over five years old pass an
GO TO NELSON SCIENCE emissions test every two years. This helps reduce pollution in Ontario.
Nitrous oxide and nitrogen dioxide are both molecular compounds. As
molecular compound a pure substance the name implies, molecular compounds are made up of individual particles
formed from two or more non-metals called molecules (Figure 2(a)). (Ionic compounds, as Figure 2(b) shows,
consist of many ions in a crystal.) The chemical formula of a molecular
compound gives the exact numbers of atoms in each molecule. The elements
that make up molecular compounds are all non-metals.
Molecular compounds are all around you: in the air that you breathe and
the substances that you eat and drink (Figure 3). A soft drink, for example,
contains water molecules, H2O, and sugar molecules, C12H22O11, as well as
(a) (b) flavouring and colouring molecules. Carbonated soft drinks, like colas, also
Figure 2 (a) Each nitrogen dioxide contain a large quantity of dissolved carbon dioxide molecules, CO2. In
particle is a molecule made up of one fact, the majority of all known compounds are molecular. Living organisms
nitrogen atom and two oxygen atoms. make thousands of different kinds of molecular compounds. Sugars, fats,
(b) An ionic compound does not exist and proteins are all molecular compounds. Some of them are very large,
as individual particles. Instead, millions
of ions are tightly held together in containing thousands of atoms in a single molecule! Like nitrogen dioxide,
a crystal. many molecular compounds affect our environment.
C05-F32B-UBOS10SB.ai
Will need photo to complete.

Figure 3 Most of the chemicals
that we encounter are molecular
C05-F32A-UBOS10SB.ai
compounds, including (a) sugar,
(b) water, and (c) acetylsalicylic acid,
(a) (b) (c)
or Aspirin.
Will need photo to complete.

Bonding in Molecules
In Section 5.4, you learned that ions form when metallic elements lose
electrons to non-metal elements. An electron transfer occurs because
• the metal’s hold on its outer electrons is weak
• the attraction of the non-metal for the metal’s electrons is strong
• a full outer electron orbit is very stable
Remember that non-metals all have almost-full outer electron orbits with
“spaces” available that attract other electrons. This allows non-metal atoms
to get relatively close to each other.
When two non-metals bond with each other, both nuclei form strong
attractions for the other’s electrons. However, neither atom attracts the
other’s electrons strongly enough to pull them away completely. What
results is a “tug of war” for electrons that neither atom ever wins. The net
effect is that the two atoms share each other’s electrons, resulting in a bond
that holds the atoms together. A chemical bond that results from atoms
sharing electrons is called a covalent bond. The bonded atoms form a covalent bond a bond that results from
molecule. Molecules that consist of two atoms joined with a covalent bond the sharing of outer electrons between
non-metal atoms
are called diatomic molecules.
Covalent bonds can form between two identical atoms or between atoms molecule a particle in which atoms are
of different elements. We will start by looking at two identical hydrogen joined by covalent bonds
atoms. A hydrogen atom has one outer electron. To achieve a stable outer diatomic molecule a molecule consisting
orbit like that of the nearest noble gas (helium), hydrogen must acquire one of only two atoms of either the same or
different elements
more electron. When two hydrogen atoms collide, the proton of one atom
attracts the electron of the other and vice versa (Figure 4). Since the atoms
are identical, they have the same ability to attract electrons. As a result,
both electrons are shared equally between the two atoms. This results in a
covalent bond between the atoms. The resulting hydrogen molecule has the
chemical formula H2. A solid line linking the atoms, H—H, represents a
covalent bond.
1p+ 1p+ 1p+ 1p+

Figure 4 A covalent bond results
from the sharing of a pair of electrons
H H H–H represented by a dash.
Fluorine is another example of a diatomic molecule. Fluorine has seven

outer electrons—one electron short of a stable electron arrangement. When
two fluorine atoms share a pair of electrons (one from each atom) to form
a covalent bond, they form a relatively stable fluorine molecule with the
chemical formula F2.
There are other kinds of diatomic molecules. Some are made up of atoms 1p+ 9p+
that share two pairs of electrons. Oxygen is an example of this. There is
a double covalent bond joining the two atoms: O==O. Other diatomic
molecules are made up of two different elements (such as hydrogen fluoride,
HF, shown in Figure 5).
H–F
Other molecules are made up of three or more atoms. A water molecule, Figure 5 A hydrogen atom and a fluorine
for example, consists of one oxygen atom and two hydrogen atoms: H2O. atom form a hydrogen fluoride molecule.
NEL 5.10 Molecules and Covalent Bonding 207

LEARNING TIP Table 1 lists common elements that exist as diatomic molecules. This list will
Who Is Hofbrincl? be useful when you write chemical equations in Chapter 6.
Hofbrincl, more correctly written Table 1 Common Diatomic Elements
as HOFBrINCl, is a name made up
State at room
using the chemical symbols of the
Name of element Chemical symbol Formula of molecule temperature
diatomic elements. It might help you
remember this list of elements. hydrogen H H2 gas
oxygen O O2 gas
fluorine F F2 gas
bromine Br Br2 liquid
iodine I I2 solid
nitrogen N N2 gas
chlorine Cl Cl2 gas
T RY THIS MOLECULAR MODELS

SKILLS: Observing, Communicating
Making models of molecules might help you understand how some 3. Connect one black and four white spheres. Sketch your
elements form compounds. Each sphere, representing an atom, model. C
has a number of connection sites. This number represents the 4. Build a model of a molecule with one oxygen atom and
number of bonds that the atom can make with another atom. Each two hydrogen atoms. Sketch your model. C
different colour represents a different element: white = hydrogen;
5. Build a molecule of hydrogen chloride. Sketch your
red = oxygen; green = a halogen (e.g., chlorine); black = carbon.
model. C
Equipment and Materials: molecular model kit 6. Build any other molecule using the molecular model kit.
1. Select two white spheres and connect them together to Sketch your model. C
represent a hydrogen molecule. Sketch your model. C A. Beside each sketch, write the chemical formula and, if
2. Select two red spheres and connect them together to possible, the name of the molecule. K/U
represent a molecule of oxygen. Sketch your model. C
Naming Molecular Compounds

Unfortunately, the naming of molecular compounds is not as
straightforward as the naming of ionic compounds. Many molecular
(a) compounds have been known for centuries and have common names
that are still in use today (Figure 6). Some of these common names are
given in Table 2.
Table 2 Common Names of Some Molecular Compounds
(b) Chemical
Common name formula Use/Occurrence
water H2O the most commonly available molecular compound on Earth;

the “universal solvent”
ammonia NH3 used in window cleaners and in the production of fertilizers
nitric oxide NO an air pollutant produced in the automobile engine when
(c) gasoline is burned
Figure 6 Molecular models of (a) water,
hydrogen sulfide H2S an invisible gas with a distinctive “rotten eggs” odour
(b) ammonia, and (c) nitric oxide

Chemists have established a system for naming molecular compounds LEARNING TIP
that involves using prefixes to specify the number of atoms. The prefix Using Prefixes
is attached to the name of the element to which it refers (Table 3). For Note that mono is used only for the
example, the name “dinitrogen pentoxide” tells us that there are two second element in the compound.
nitrogen atoms (di means two) and five oxygen atoms (penta means five) in Further, the second “o” in mono is
the compound. The chemical formula for this compound, therefore, is N2O5. dropped when used with oxide to
become “monoxide” rather than
The prefix mono is used only for the second element in the compound, so
“monooxide.”
CO2 is carbon dioxide. Similarly, the name “carbon monoxide” states that
there is one carbon and one oxygen atom in the molecule: CO.
Table 3 Prefixes Used for Molecular Compounds
Prefix Number of atoms Sample molecular compound
mon(o)- 1 carbon monoxide, CO

di- 2 carbon dioxide, CO2
tri- 3 sulfur trioxide, SO3
tetra- 4 carbon tetrachloride, CCl4
penta- 5 phosphorus pentafluoride, PF5
When you are asked to write the name of a compound, first check the
formula to see if it includes a metal. If the first element is a metal, the
substance is an ionic compound and should be named accordingly (with
no prefixes). If the compound consists only of non-metals, it is a molecular
compound, and you should follow these steps to name it.
WRITING TIP
SAMPLE PROBLEM 1 Naming Molecular Compounds
Concluding Your Summary
Name the molecular compound with chemical formula PCl3. Write a closing sentence that connects
the main idea and key points. For
Step 1 Write the names of both elements in the same order as in the formula. Replace
example, “The use of prefixes helps
the ending of the second element with “ide.” students remember the number of
phosphorus chlorine ide atoms in a molecular compound.”
Step 2 Add prefixes. Remember that the prefix “mono” is never used for the first
element.
phosphorus tri chloride
The compound with chemical formula PCl3 is called phosphorus trichloride.
Practice
Name the compound with chemical formula N2O.
sulfur dioxide
SO2
Writing Chemical Formulas of Molecular
Figure 7 In the chemical name, the
Compounds prefix specifying the number of atoms
Given its name, writing the formula of a molecular compound is relatively comes before the element’s name. In
the chemical formula, however, the
simple. The prefixes in the name become the subscripts in the formula. For
number of atoms is specified by a
example, the molecular compound called sulfur dioxide has the chemical subscript after the element’s chemical
formula SO2 (Figure 7). symbol.

Molecular Compounds from Fossil Fuels
Most compounds are molecular. Living things make a huge variety of different
molecular compounds. Another source of thousands of different molecules is
fossil fuels. Coal, oil, and natural gas are the most common fossil fuels. These
substances take millions of years to form from the partially decayed remains
of ancient plants and animals. Fossil fuels are called a non-renewable resource
because they are not formed as quickly as we are using them.
Fossil fuels have become very important to our way of life. When we burn
fossil fuels, the energy stored within them heats our homes, powers our
vehicles, and can be harnessed to generate electricity. Without the energy
released from fossil fuels, our lives would be very different. But there is
more to fossil fuels than just their energy. Compounds extracted from fossil
fuels are processed into petrochemicals. We use these compounds to make
important consumer products and industrial chemicals, including plastics,
Figure 8 Even something as ordinary
as a backpack could contain hundreds pharmaceuticals, and synthetic fabrics (Figures 8 and 9).
of different molecular compounds, most Try to imagine life without the products from petrochemicals. Half of your
of them made from fossil fuels. clothing is now gone! Personal products like toiletries, cosmetics, and their
containers no longer exist. The paint on the walls and the synthetic carpet on
the floor—gone. Do you need medication regularly? Too bad! Many drugs are
made using petrochemicals. And what about communication? Computers,
phones, and all portable electronic devices cannot function without their
plastic cases and the insulation covering their electrical parts.
fuels and other agriculture fertilizers

Natural Gas Petrochemical
products (helium, pesticides
Processing Plant
natural gas) herbicides
gases methane detergents

ethane
propane synthetic fibres
butane
inorganic sulfuric acid
chemicals ammonia
nitric acid
organic chemicals
other products paints

varnishes
solvents
Oil Refinery gases and liquids adhesives
explosives
fuels gasoline
kerosene plastics
jet fuel
heating oils rubber
lubricants and greases

other products waxes
solvents
asphalt
sulfur
Figure 9 Crude oil and natural gas are the raw materials for a vast range of chemical products.

Spills and Leaks of Molecular Compounds DID YOU KNOW?
The world’s oil and natural gas deposits are concentrated in a few places, Petrodollars
far from the places where they are sold and used. Most of Canada’s oil is Annual sales from the global
petrochemical industry are estimated
in the west and north of the country, while most Canadian consumers
to be over $1 trillion. With a global
live in the south and east. As a result, huge quantities of oil and natural population of almost 7 billion, that is
gas are carried across North America and around the world. Oil is about $150 for every person in the
transported by rail, ship, or pipeline. Natural gas is world.
transported by pipeline or in specially designed
tankers. Accidents are inevitable. Loaded oil tankers
travel across oceans and through the Great Lakes.
Spills from oil tankers can have a devastating
effect on local ecosystems, contaminating water
and shorelines and killing birds and other aquatic
organisms (Figure 10). A lot of research is done
on the best way to deal with the leaked chemicals.
Accidental spills and poor waste disposal
methods leak toxins into the ground, where
they pollute groundwater. One such toxin is a
molecular compound called trichloroethene.
Trichloroethene is widely used in industry as a
degreaser for cleaning metal and glass. Spills of
this compound are a serious problem in Canada
because they can contaminate the groundwater.
Nearly 9 million Canadians rely on groundwater
for their drinking water. Canadian researchers are
working on innovative ways to clean groundwater.
Dr. Elizabeth Edwards, a professor of chemical
engineering at the University of Toronto, has Figure 10 Spilled oil is a frequent environmental problem.
found that some pollutants are food for microbes.
Dr. Edwards has successfully used microbes to remove trichloroethene University professors are often
involved in solving real-world
from soil. As the microbes “dine,” they convert the pollutant into ethene, problems. To find out more about Dr.
a relatively harmless gas. These microbes are now being used to remove Edwards’ research,
trichloroethene from polluted sites around the world. GO TO NELSON SCIENCE
RESEARCH THIS SLICKS FROM SHIPS

SKILLS: Researching, Identifying Alternatives, Analyzing the Issue, Defending a Decision, Evaluating SKILLS HANDBOOK
4.A., 4.C.
Accidental spills of oil can be devastating for the environment. 1. Research the role of chemical methods, physical methods,
Environmental engineers develop strategies to clean up oil spills, and biological agents in cleaning an oil spill.
using their knowledge of oil’s chemical and physical properties.
GO TO NELSON SCIENCE A. Analyze the advantages and disadvantages of each

clean-up strategy. Which strategies are the most
Recently, biological agents have also been successfully economically viable? Which strategies are the most
used to clean up oil spills. Naturally occurring micro-organisms environmentally friendly? T/I A
such as algae and bacteria help break down the spilled oil. This
B. Which method can be used to clean up the majority of
process is very slow but can be sped up by adding fertilizer to
a spill on calm water? T/I
the contaminated area.

IN SUMMARY
• Molecular compounds both occur naturally and • The name of a molecular compound includes
are produced synthetically. Some are beneficial; prefixes to indicate how many atoms of each
others are not. element are present (for example, dinitrogen
• Molecular compounds are made up of molecules. pentoxide). If there is only one atom of the first
A molecule is a group of two or more atoms element, the prefix “mono” is omitted. The name
joined by covalent bonds. of the last element ends in “ide.”
• A covalent bond forms when two non-metallic • Fossil fuels provide valuable energy and
atoms share electrons. petrochemicals. Many important industrial
chemicals and consumer products are made
• A variety of strategies are used to reduce the
from petrochemicals.
environmental damage resulting from spilled
chemicals.
CHECK YOUR LEARNING

1. (a) Name these compounds: NI3, CCl4, OF 2, P2O5, and N2O3. 7. (a) Why are fossil fuels a non-renewable resource?
(b) Describe how each compound name indicates the ratio of (b) What are the two main benefits that we get from fossil
elements. K/U fuels?
2. Write the chemical formula for each of the following (c) What are two disadvantages of our dependence on fossil
molecular compounds: K/U fuels? K/U A
(a) carbon monoxide (d) nitrogen tribromide 8. Explain why chlorine occurs as diatomic molecules in nature,
(b) sulfur tetrafluoride (e) carbon disulfide rather than individual atoms. K/U
(c) dinitrogen tetroxide 9. Hydrogen peroxide, H2O2, is a molecular compound used
to disinfect cuts (Figure 11). Why is the formula of this
3. For each of the following compounds, classify the elements
compound not written as HO? A
as metal or non-metal, classify the compound as ionic or
molecular, and name the compound. K/U
(a) SO2 (e) KClO3
(b) PbO2 (f) SnO2
(c) AlCl3 (g) FePO4
(d) N2O (h) N2O4
4. (a) How many electrons do atoms of hydrogen and oxygen
have in their outer orbits? Figure 11
(b) How many electrons will these elements gain before they
become stable? 10. How can molecular compounds be distinguished from ionic
(c) Sketch a diagram to show how hydrogen and oxygen compounds
could bond to form a stable molecule. K/U (a) by looking at their chemical formulas?
5. Explain, with diagrams, why the term “molecule” is (b) by testing them in the lab? K/U
appropriate for hydrogen chloride but not for 11. What effect could C05-F48-UBOS10SB.ai
a disruption in the supply of oil have on the
sodium chloride. K/U cost of goods you purchase? Why? A
6. Contrast the way in which the elements in ionic and
molecular compounds achieve stability. K/U

Ontario Science 10 SB
CONDUCT AN INVESTIGATION
5.11
Properties of Ionic and SKILLS MENU
Molecular Compounds Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
As you learned earlier in this chapter, ionic compounds are solids made Controlling Variables Communicating
up of positive and negative ions. Molecular compounds are made up of
tiny individual molecules. Ionic and molecular compounds have quite
different properties.
In this investigation, you will compare some physical properties
of ionic and molecular compounds: solubility in water, electrical
conductivity of the mixtures they form with water, and melting point.
Testable Question Procedure

SKILLS HANDBOOK
2.B., 3.
Which of the following substances are molecular 1. Design a procedure to compare
compounds and which are ionic compounds: lauric • the solubility of the compounds in water
acid, C12H24O2; sodium hydrogen carbonate, NaHCO3;
• the conductivity of a solution of each of the
glucose, C6H12O6; potassium chloride, KCl?
compounds with water
Figure 1 shows the maximum quantity of each
Hypothesis/Prediction compound that you should use. Check the
Use the information in the chemical formulas to MSDS for each compound. Be sure to include all
write a hypothesis regarding the classification of the necessary safety precautions.
compounds. Give reasons for your hypothesis. Use
your hypothesis to predict an answer to the Testable
Question. Figure 1 Only a small quantity
of each compound is required.
Experimental Design 2. With your teacher’s approval, perform your

You will use solubility and conductivity tests, procedure. Record your observations.
along with researched melting point data, to 3. Look up the melting point of each substance in a
determine whether four solids are ionic or reference book or online. Add these data to your
molecular compounds. experimental information.
Equipment and Materials GO TO NELSON SCIENCE
• eye protection
• apron Analyze and Evaluate
• 4 small test tubes and stoppers (a) Use your evidence to answer the Testable
• test-tube rack Question. Compare your answer with your
• low-voltage conductivity tester Prediction. Account for any differences. T/I
• well plate (b) Which of the three tests was most useful in
• samples of classifying
Ontario the
Science 10 SBcompounds as ionic or molecular?
• lauric acid, C12H24O2(s) Explain.
0-17-635528-6 T/I
• sodium hydrogen carbonate, NaHCO3(s) FN C05-F31 -UBOS10SB

• glucose, C6H12O6(s) Apply and Extend
Creative Freelancers
CO Create a table to compare the typical properties
• potassium chloride, KCl(s) (c)
of ionic and Sam
molecular
Laterza compounds. K/U C
Pass Second Pass

Approved
CHAPTER
LOOKING BACK
5
A substance’s chemical Changes can be classified as We can classify pure

and physical properties chemical or physical. substances by observing
• Chemical changes involve new
and effects.
substances being produced. (5.2) • Elements can be grouped according
• Physical properties (for example, • Evidence of chemical change to their properties. (5.4)
state, colour, electrical conductivity) includes colour change, precipitate • Metals and non-metals combine to
involve a description of the production, release or absorption of form different kinds of compounds:
substance as it is. (5.1) energy, and formation of a gas. (5.1) ionic and molecular. (5.6, 5.10)
• Chemical properties describe a • Physical change involves changes • Compounds are pure substances
substance’s behaviour (for example, in form (for example, state) but not that can be broken down into their
reactivity with acids, combustibility) in chemical identity. (5.1) individual elements. (5.4)
as it becomes a completely different • Physical properties distinguish
substance(s). (5.1) molecular compounds from ionic
compounds. (5.11)
Ionic compounds are made up Molecular compounds Many consumer products

of positive and negative ions. are made up of distinct have been developed from
molecules. petrochemicals.
• Atoms gain or lose electrons resulting
in a stable electron arrangement, thus • The majority of all known • Product chemists select chemicals
becoming ions. (5.5) compounds are molecular. (5.10) to perform specific functions
• Positively charged ions are cations; • Molecules consist of two or more in a product. (5.10)
negatively charged ions are anions. non-metal atoms linked by a
(5.5) covalent bond. (5.10)
10 SB • Ionic compounds consist of cations and • Covalent bonds form when atoms
anions linked by ionic bonds. (5.6) share electrons. (5.10)
C05-F40-UBOS10SB
• Many ionic compounds are
CrowleArt Group • Molecular compounds are often
Deborah Crowle
electrolytes: the solutions they form named using prefixes. (5.10)
1st pass
conduct electricity. (5.6)
• The names of ionic compounds formed
by two elements end in “ide.” (5.7)
• The names of compounds that
include polyatomic ions usually end
in “ate.” (5.9)

THINK NOW? physical property (p. 175)
chemical property (p. 175)
You thought about the following statements at the beginning of element (p. 184)
the chapter. You may have encountered these ideas in school, period (p. 184)
at home, or in the world around you. Consider them again and group (p. 184)
decide whether you agree or disagree with each one. alkali metals (p. 184)
alkaline earth metals (p. 184)
halogens (p. 184)
noble gases (p. 184)
Na Bohr–Rutherford diagram
(p. 185)
compound (p. 186)
ion (p. 188)
cation (p. 190)
anion (p. 190)
ionic compound (p. 192)
1 The label on a chemical product
provides all the information you need
4 Elements are more reactive and more
hazardous than the compounds that ionic bond (p. 192)
to use the product safely. they form. electrolyte (p. 194)
Agree/disagree? Agree/disagree? polyatomic ion (p. 202)
molecular compound (p. 206)
covalent bond (p. 207)
molecule (p. 207)
diatomic molecule (p. 207)
2 Recycling
practice.
used motor oil is common
5 Bottled water is better for your health
than tap water.
BIG Ideas
Pool water is a much better Adding manufactured chemicals to
3 conductor of electricity than
6 the environment is a bad thing.
ways.
pure water. Agree/disagree?
Agree/disagree? Chemical reactions may
How have your answers changed since then? on the environment, but
challenges.

CHAPTER
REVIEW
5
What Do You Remember? 6. Name or write the chemical formula for each of
the following compounds and classify each one as
1. Describe, using an example, how you would
an ionic or a molecular compound. (5.7, 5.10) K/U
recognize the chemical formula of

(a) FeCl3 (f) Sn(NO3)2
(a) an element (b) CuSO4 (g) carbon tetrabromide
(b) a compound (5.4) K/U
(c) NI3 (h) calcium carbonate
2. Distinguish between the following terms, using (d) PbO2 (i) nitrogen monoxide
specific examples. (5.1–5.11) K/U (e) P2O3 (j) hydrogen sulfide
(a) physical and chemical properties 7. In which of the following groupings do each of
(b) ionic and molecular compounds the three ions have the same number of electrons?
(c) ionic and covalent bonds How many electrons do they have? (5.5) K/U
3. Explain your answers to the following (a) O2–, F–, N3– (c) K+, P3–, Ar
questions. (5.1–5.10) K/U (b) Na , K , Li
+ + +
(d) F–, Cl–, Br–
(a) Is tap water a pure substance? 8. Classify each of the following compounds as
(b) Is the ability to burn a physical property? ionic or molecular and write their chemical
(c) What type of property describes the formulas. (5.7, 5.10) K/U
formation of a new substance? (a) potassium chloride (d) calcium iodide

(d) What kind of elements make up molecular (b) carbon monoxide (e) sulfur dioxide
compounds? (c) carbon tetrafluoride (f) lithium oxide
(e) What is special about the outer electron 9. Look at your answers to question 8. Explain why
orbits of helium, neon, and argon? Roman numerals are not required to name these
(f) What kind of ion has more protons than compounds. (5.7) K/U
electrons?
(g) Which are polyatomic ions: hydroxide, 10. Write the name and chemical formula of the
chloride, ammonium, and carbonate? compound that forms when the following pairs
of elements combine. (5.7) K/U
4. Copy and complete Table 1 in your

(a) calcium and sulfur
notebook. (5.5) K/U
(b) aluminum and chlorine
Table 1 Ion Formation for Three Elements (c) sodium and phosphorus
Bohr– Bohr– (d) aluminum and sulfur
Rutherford Rutherford Chemical
diagram of diagram of symbol of
11. Name or write the chemical formula for each of
Element the atom the ion the ion the following compounds involving polyatomic
ions. (5.9) K/U
(a) Na
(a) calcium nitrate (d) Cu(ClO3)2
(b) S (b) silver carbonate (e) lead(II) phosphate
(c) Fe(OH)3
(c) Cl
12. Imagine the chemical formula of a compound
formed from each of these pairs of elements.
What Do You Understand? What are the mostly likely subscripts in each
chemical formula? (5.7) K/U T/I
5. List the numbers and names of atoms in the
following molecules. (5.10) K/U
(a) an alkali metal and a halogen
(b) an alkaline earth metal and a member of
(a) CO2 (c) CCl4
Group 16
(b) N2 (d) HBr
(c) an alkali metal and a member of Group 16
13. Hazardous household products used in the home 17. The price of gasoline changes a great deal
have different safety symbols than those used depending on the price of oil. Some
in the workplace. For example, Figure 1 shows environmentalists argue that high gas prices
symbols found on a spray can of furniture polish. are good for the environment. Why? (5.10) A
(a) What are the risks involved in using this 18. Why is it important to understand the chemical
product? composition of chlorinating agents used in
(b) What are the equivalent WHMIS symbols for swimming pools before using them? (5.8) A
these risks?
(c) What would be the advantage of having the Create and Evaluate
same labelling system for home and work?
19. Look back to the Engage in Science page about
(5.3) K /U A
the space elevator. Think about the cable that

might some day anchor the space elevator to
Earth. (5.1–5.11) T/I C A
(a) What physical and chemical properties

should the cable have? Think of properties
that were mentioned in the chapter and
(a) (b)
others that would be relevant. Explain.
Figure 1
(b) Choose one of these properties. Suggest a
Solve a Problem way to test that the cable has this property.
(c) Think about how the space environment
14. An unknown element X forms a compound with might affect the cable. How should this affect
chlorine: XCl2. Predict the chemical formula the selection of a material for the cable?
of the compound that element X makes with (d) What might be some environmental and
oxygen. Justify your answer. (5.7) T /I
social impacts of building a space elevator?
15. As you have seen in this chapter, hydrogen (e) Write a paragraph about the space elevator
is very different from the other elements in from the perspective of someone living
Group 1. (5.4) T /I when the space elevator is being built. Refer
to a chemical and its properties in your
(a) Chemists have put hydrogen and the alkali
writing. Your paragraph could be a letter to a
metals in the same column of the periodic
newspaper editor, a blog, a news flash, or any
table. Why?
other format of your choice.
(b) Hydrogen is sometimes shown above
fluorine on the periodic table? Why? Reflect on Your Learning
16. Figure 2 shows two properties of oil and water. 20. (a) Complete this sentence: “One idea that I
What impact do these properties have on found particularly interesting in this chapter
attempts to clean up an oil spill on water? and would like to explore further is…”
(5.10) K/U A
(b) Why did this idea catch your interest? Share

this idea with a classmate or your teacher.
Web Connections
21. The two most common household bleaches are
chlorine bleach and oxygen bleach. Research their
advantages and disadvantages. Which would you
recommend for home use? Why? (5.3) T/ I A
(a) (b)
Figure 2 (a) Oil and water do not mix. The oil stays in droplets. other Nelson Web Connections,
(b) Oil floats on water. GO TO NELSON SCIENCE

CHAPTER
SELF-QUIZ
5
1. A physical property is a 5. The number of protons in the nucleus of an atom
(a) characteristic that does not involve forming is its atomic number. (5.4) K/U
a new substance. 6. The elements in the periodic table are arranged

(b) behaviour that occurs when a substance in order of decreasing atomic number. (5.4) K/U
becomes something new.

(c) change that does not produce a new
substance. Copy each of the following statements into your notebook. Fill
in the blanks with a word or phrase that correctly completes
(d) characteristic of a substance that allows it
the sentence.
to take part in a reaction. (5.1) K/U
7. A(n) ______ is a horizontal row of elements on

2. Which statement correctly describes the
the periodic table. (5.4) K/U
relationship between electron arrangements and

reactivity? (5.6) K/U
8. Most of an atom’s mass is concentrated in an
(a) Atoms with completely filled outer orbits extremely small, dense, positively charged core
usually react with other atoms. called the ______. (5.5) K/U
(b) Atoms frequently react with other atoms in

order to have one outer electron. Match each term on the left with the most appropriate term
(c) Atoms tend to react with other atoms in on the right.
order to have a full outer electron orbit. 9. (a) Ca (i) ionic charge of −2
(d) Stable atoms readily react with other atoms (b) S (ii) ionic charge of +3
of other elements to form compounds. (c) K (iii) ionic charge of +1
3. In reactions with non-metals, metals tend to (d) Al (iv) ionic charge of +2 (5.5) K/U
(a) lose electrons to become positively charged 10. (a) Fe(NO3)2 (i) iron(III) nitride
anions. (b) Fe3N2 (ii) iron(II) nitrate
(b) gain electrons to become positively charged (c) FeN (iii) iron(II) nitride
cations. (d) Fe(NO3)3 (iv) iron(III) nitrate (5.7) K/U
(c) gain electrons to become negatively charged

anions. Write a short answer to each of these questions.
(d) lose electrons to become positively charged 11. What has to happen to a substance in order for
cations. (5.5) K/U
you to observe its chemical properties? (5.1) K/U
4. Which of the following is the correct formula of 12. Explain why ionic compounds are electrically
diphosphorus pentoxide? (5.10) K/U neutral. (5.6) K/U
(a) N2O5 13. Why are groups of elements on the periodic table
(b) P2O5 sometimes referred to as “families”? (5.4) K/U
(c) PO43-
(d) P5O2

14. An element is a substance that cannot be broken 22. (a) The term “polyatomic ion” can be broken into
down into simpler substances. Does this mean three parts: poly, atomic, and ion. Explain the
that elements cannot undergo chemical change? meaning of each part of this term.
Explain. (5.1, 5.4) K/U T/I
(b) Use the meaning of each part to write a
15. Compare metals and non-metals in terms of their definition of “polyatomic ion.” (5.9) T/i C
(a) chemical properties. 23. (a) Describe a jewellery-cleaning method that

(b) physical properties. (5.1, 5.4) K/U requires a chemical change.
16. Briefly describe the trend in how elements form (b) Describe a jewellery-cleaning process that
ions, as you look across the periodic table from involves a physical change. (5.1) A
Group 1 to Group 17. (5.4) K/U

24. Describe, using an example, how a substance
being added to water can cause
17. What are some characteristics of a substance
that could be discovered by studying its chemical (a) a chemical change.
properties? (5.1–5.11) T/I
(b) a physical change. (5.1, 5.2) T/I
18. The production of a gas is evidence that a

chemical change may have occurred.
However, the boiling of water also produces a
gas. (5.1–5.3) T/I
(a) Why is boiling not a chemical change?

(b) Give an example of a chemical change that
produces a gas. Explain why this example is
a chemical change.
19. Write a paragraph describing the relationship
between atoms and ions. Use each of the
following words at least once in your paragraph:
atom, ion, neutral, cation, anion, electron, and
proton. (5.5) K/U C
20. For each property described below, identify the

property and state whether it is a physical or a
chemical property. (5.1, 5.2) T/I
(a) liquid nitrogen boils at -196 °C

(b) silver jewellery tarnishes in air
(c) propane ignites easily
21. Many people know water by its common name,
but not by its systematic name. Write a one-
paragraph advertisement warning people of
the potential dangers of dihydrogen monoxide
(water). (5.10) C

CHAPTER
6 Chemicals and
Their Reactions
KEY QUESTION: What are chemical reactions

and how do they impact our lives?
What chemical reaction could draw

this many people to a world-record-setting
event in Belgium, in 2008?
220 Chapter 6 • Chemicals and Their Reactions NEL

UNIT C
Chemical
Reactions
Chemicals and Chemicals and Acids and Bases

Their Properties Their Reactions
KEY CONCEPTS
Chemical reactions Chemical reactions obey Chemical reactions

involve the change of the law of conservation involving consumer
one or more substances of mass and can be products can be useful
into one or more different represented by balanced or harmful.
substances. chemical equations.
We can use patterns Corrosion is the reaction Chemical reactions affect

in chemical properties of metals with substances us and our environment.
to classify chemical in the environment.
reactions.

ENGAGE IN
SCIENCE
The mint−cola fountain experiment has fascinated me ever since I saw a

demonstration of it at a science fair. I searched the Internet and found thousands
of hits and every possible variation of this experiment you can imagine! I tried it
myself with exciting results, as the photo shows.
Then I started wondering which mint−cola mixture produces the highest fountain.
Some friends and I did our own experiment, playing around with some of the
variables and measuring how high the fountain blew. We compared diet and regular
cola (freshly opened 2 L bottles each time) and always added 30 g of mint candy.
We tried crushing the mints before adding them to the cola. Then we tried adding
either table salt, rock salt, or detergent to the cola before adding the mints. The
results of the tests are summarized in the diagram. (In case you’re wondering,
we didn’t drink any of the cola that had been used in the experiment!)
We have a couple of things to follow up on: we plan to find out how high
the fountain will go if we add detergent to regular cola. Any predictions?
I’ve also read that it works with tonic water…
Maximum Fountain Height

5m
mint
4m
mint
detergent
3m
2m
rock salt
table salt
1m
table salt
crushed mint crushed mint

0m
DIET
diet cola regular cola
Go to NElsoN sCIENCE

WHAT DO YOU
THINK?
encountered. you may have encountered these ideas in school, at home, or in
1 Chemical reactions are bad for the environment.

Agree/disagree?
4 Carbon dioxide in your classroom makes you sleepy.
Agree/disagree?
2 Chemical reactions are reversible.

Agree/disagree?
5 Some people are allergic to cellphones.
Agree/disagree?
3 The total mass of substances involved in a chemical

change remains constant.
6 Hydrogen will replace gasoline as the fuel of the
twenty-first century.

FOCUS ON
READING
Making Inferences
When you make inferences, you make sense of what an author is implying
but not stating explicitly. It is a form of problem-solving using evidence
from the text, personal knowledge, and reasoning. Use the following
strategies to make inferences:
• look for context clues such as significant words, comparisons, or contrasts
• think about what you already know about the circumstance, issue,
Reading Tip
problem, cause, or effect
look for tips like this. They will help • combine the clues and your prior knowledge or experience to draw
you develop literacy strategies. a conclusion or form an opinion
• revise your inference if you find new information or clues that challenge it
types of Chemical Reactions: Combustion

In the early hours of August 2, 2008, a north Toronto neighbourhood
was rocked by a loud explosion. Startled residents stared out their
windows in disbelief as a giant fireball rose high into the night sky.
Why? A nearby propane storage depot was on fire (Figure 1)! Large
chunks of metal, probably from exploded propane storage tanks, littered
the area. Shockwaves from the explosion shattered windows and ripped
Figure 1 Propane was the fuel in this doors off their hinges. Firefighters rushed to the scene, but all they
dramatic combustion reaction in north
Toronto.
could do was cool the remaining propane tanks with water and wait for
the fireball to burn itself out.
Making Inferences in Action

Authors often tell you more than they say directly through their words.
Use the clues in the text and what you already know to make an
inference. Inferences help you to have a deeper understanding of the
text. Here is how one student made inferences as she read the paragraph
about combustion.
Clues from Text + Prior Knowledge = Inference
explosion happened • fire causes explosions an arsonist might have

at night • arsonists usually work caused this explosion
at night
explosion is in a most homes are heated by a cracked natural gas

residential area natural gas pipe might have caused
the explosion
firefighters let fireball firefighters usually use water maybe water cannot be used
burn out to extinguish a fire to put out a propane fire

Describing Chemical Reactions 6.1
Chemical reactions are everywhere, resulting in changes that we see all
around us: fires burn, grass grows, joggers run, milk sours, autumn leaves
change colour, and marshmallows toast to a golden brown (Figure 1).
In a chemical reaction, one or more substances change into different
substances. One of the most familiar types of chemical reaction is
combustion (burning). We use combustion reactions to cook our food, heat
our homes, and travel long distances. Combustion reactions can also lead
to many health and environmental problems. Chemists have developed a
set of rules that enable people around the world to communicate and share
information about chemical reactions. In this chapter, you will learn some of
these rules of communication. Figure 1 Combustion is a chemical
reaction that releases energy.
Describing Chemical Reactions chemical reaction a process in which
with Equations substances interact, causing the formation
of new substances with new properties
Chemists use equations to describe chemical reactions. You will learn how
to write and interpret two kinds of equations. In word equations, the names word equation a way of describing a
of the chemicals are written out in full. In chemical equations, chemical chemical reaction using the names of the
reactants and products
formulas are used to represent the chemicals.
chemical equation a way of describing
Examples of Word and Chemical Equations a chemical reaction using the chemical
During a chemical reaction, reactant particles collide, allowing their atoms (or formulas of the reactants and products
ions) to rearrange and form products. Reactants are the substances that are reactant a chemical, present at the start
used up during the reaction. Products are the substances that are produced of a chemical reaction, that is used up
during the reaction. Figure 2 shows the reaction that occurs when a mixture during the reaction
of powdered iron and sulfur is heated. The reactants in this case are iron and product a chemical that is produced
sulfur. The product is iron(II) sulfide. Chemical reactions can either absorb or during a chemical reaction
release energy. In this reaction, more energy is released than is absorbed. The
word “energy” is therefore written on the right side of the equation, with the
products. If energy is absorbed, it is written with the reactants.
We can communicate the reaction between iron and sulfur using either
a word equation or a chemical equation. Since energy is released in this
reaction, “energy” is written on the right side of the chemical equation.
Reactants yields Products LeaRning Tip
Clues of a Chemical Reaction
Word equation: iron + sulfur → iron(II) sulfide + energy
Look back to Table 2 in Section 5.1.
These clues indicate that a chemical
Chemical equation: Fe + S → FeS + energy reaction may be taking place.
(a) (b) (c)
Figure 2 (a) Powdered iron (black) is mixed with powdered sulfur (yellow). (b) Heating the mixture starts
the chemical reaction. (c) The final product is iron(II) sulfide.
NEL 6.1 Describing Chemical Reactions 225

Word equations and chemical equations have a lot in common:
• An arrow indicates the direction in which the chemical reaction
is going. The arrow is read as “yields,” “forms,” or “produces.”
• Substances to the left of the arrow are called reactants.
• Substances to the right of the arrow are called products.
• If several reactants are involved, “+” signs are placed between the reactants.
This indicates that the reactants must be in contact with each other.
• If several products are formed, “+” signs are placed between the products.
Both equations list the reactants and products of the reaction. The
chemical equation, however, provides far more detail: it gives the chemical
state symbol a symbol indicating the formulas of the reactants and products as well as their state. State symbols
physical state of the chemical at room tell us the state, or form, of each substance in a chemical equation. For
temperature (i.e., solid (s), liquid (l), gas
example, the state symbol (s) means “solid.” All the chemicals involved in this
(g), or aqueous (aq))
reaction are solids. Table 1 summarizes the most common state symbols.
Now look at Figure 3. Pale green copper(II) carbonate absorbs energy
Table 1 Common State Symbols in to produce carbon dioxide gas and copper(II) oxide. The equations for this
Chemical Equations reaction are:
State symbol Meaning Word equation:
(s) solid energy + copper(II) carbonate → carbon dioxide + copper(II) oxide
(l) liquid
Chemical equation:
energy + CuCO3(s) → CO2(g) + CuO(s)
(g) gaseous
The state symbols in this case tell you that the reactant is a solid and that
(aq) aqueous (dissolved
in water) the products are a gas and a solid. Since energy must be absorbed for this
reaction to occur, the energy term is written on the left side of the equation.
One final example: if a piece of zinc metal is placed in a solution of
copper(II) sulfate, a fuzzy reddish-brown coating forms on the zinc (Figure 4).
After about 20 min, the entire zinc strip is covered by this new solid.
Reading Tip
Word equation:
Making Inferences
Look for context clues such as zinc + copper sulfate → zinc sulfate + copper + energy
significant words, comparisons, Chemical equation:
or contrasts. For example, in the
comparison of word and chemical Zn(s) + CuSO4 (aq) → ZnSO4 (aq) + Cu(s) + energy
equations, you notice an arrow pointing The state symbol (aq) tells us that the chemical is dissolved in water. Both
right. From the direction of the arrow,
you infer that the reactants on the left
reactants and products can be aqueous.
of the arrow lead to the products on
the right of the arrow. You infer that the
direction of the arrow is a visual symbol
to help you understand these equations.
Figure 3 Pale green copper(II) carbonate Figure 4 The first test tube contains copper(II)
reacts to become black copper(II) oxide when sulfate solution. The second test tube contains
it is heated. the same solution and also a strip of zinc. The
blue colour of the solution fades as a reddish-
brown solid forms on the zinc. What is this solid?
in SUMMARY
• Chemical reactions always involve one or more • We can use word equations or chemical equations
reactants changing to give one or more products. to describe chemical reactions. In both, the
• State symbols are oft en written aft er a chemical reactants are written on the left and an arrow
formula to indicate the state of the substance. points right, toward the products.
CHECK YOUR LeaRning

1. What is the purpose of the arrow in a chemical equation? K/U 5. Consider the following chemical equation:
2. Write word equations for the following reactions: K/U Zn(s) + H2SO4(aq) → H2(g) + ZnSO4(aq) + energy K/U
(a) Acetic acid (vinegar) and sodium hydrogen carbonate (a) Name the products of this reaction.
(baking soda) react to form water, carbon dioxide, and (b) What liquid is also present in the reaction vessel, along
sodium acetate. with the reactants and products?
(b) Aluminum metal reacts with oxygen from the air to form a (c) What evidence would indicate that this reaction is occurring?
protective coating called aluminum oxide.
(d) Will the test tube in which this reaction is occurring
(c) Water and carbon dioxide are produced when propane become warmer or cooler during the reaction? Why?
burns in oxygen.
(e) What evidence would indicate that the reaction has stopped?
3. Some barbecues cook food by burning charcoal. (Charcoal is
(f) How does the quantity of zinc metal change as the
mostly carbon.) The chemical equation for this reaction is
reaction proceeds?
C(s) + O2(g) → CO2(g) K/U T /I
6. Take another look at the figures in this section. For each
(a) Write the word equation, including an energy term, for figure, what evidence suggests that a chemical change has
this reaction. taken place? K/U
(b) Write the state of each substance in the reaction. 7. In a burning marshmallow (Figure 1 on page 225), sugar
(c) What evidence suggests that a chemical change is breaks down into carbon (the black residue) and water
taking place? vapour. K/U T/I
(d) What would you expect to see when this reaction (a) Write a word equation for this reaction.
is complete? (b) What evidence tells you that the reaction is complete?
4. Consider the reaction in Figure 5: (c) Write a hypothesis predicting how the mass of a
AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq) K/U marshmallow will change from before to after burning.
(a) Name the reactants and products in this reaction. Include an explanation in your prediction.
(b) Name the chemicals that are dissolved in water. 8. Bread rises due to the action of a single-celled organism
called yeast. Yeast converts some glucose molecules in bread
(c) Name the white solid.
dough into carbon dioxide and ethanol. Carbon dioxide and
(d) What physical property do both reactants have in common? ethanol then bubble through the dough, making it rise. K/U
(a) Write a word equation for this reaction.
(b) Is the action of carbon dioxide a physical or chemical
change? Explain.
9. Under the right conditions, some chemical reactions can be
reversed. For example, K/U A
(a) An important step in bottling carbonated soft drinks
is bubbling carbon dioxide gas into cold water and
then sealing the bottle. Inside, a solution of hydrogen
carbonate (also know as carbonic acid), H2CO3(aq), soon
forms. Write the chemical equation for this reaction.
(b) Describe two things you could do to quickly reverse
this reaction.
Figure 5 When two aqueous reactants
mix, they sometimes form a solid product.
NEL 6.1 Describing Chemical Reactions 227

Is Mass Gained or Lost During SKILLS MENU

a Chemical Reaction? Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
During a chemical reaction, atoms, molecules, or ions collide, rearrange, Controlling Variables Communicating
and form products. Word and chemical equations describe the chemical
changes that occur during a chemical reaction.
testable Question Equipment and Materials

How does the total mass of the products of a • eye protection
chemical reaction compare with the total mass of • lab apron
the reactants? • test tube
• tongs
Prediction • 250 mL Erlenmeyer fl ask and stopper
Read the Experimental Design and Procedure. Create • 10 mL graduated cylinder
a table similar to Table 1. In the first row of your • balance
table, predict an answer to the Testable Question.
• 100 mL graduated cylinder
compressed dangerously
Provide a possible explanation for your Prediction. gas reactive material
• plastic cup
flammable
compressed dangerouslyand biohazardous
Table 1 Predictions and Observations gas • dilute solutions of
combustible
reactive material
material
infectious material
flammable and
combustible
• sodium hydroxide, NaOH(aq)
biohazardous poisonous and
infectious material
Reaction 1 Reaction 2 infectious material
oxidizing
material
• iron(III) nitrate, Fe(NO
material
causing immediate
) (aq)
and serious toxic 3 3
poisonous and
predicted mass change: decrease, no oxidizing • antacid tablet
infectious material effects
change, or increase? material

causing immediate
and serious toxic poisonous and
Iron(III)
corrosive
effects nitrate and infectious
sodiummaterialhydroxide are both corrosive,
initial mass of reactants + container (g) material causing other
toxic, and
poisonous and irritants. If splashed
toxic effects in the eyes, sodium
corrosive infectious material
final mass of products + container (g) material hydroxide
causing other can cause blindness. Wash any spills on skin or
toxic effects
change in mass (final − initial) (g)
clothing immediately with plenty of cold water. Report any
spills to your teacher.
observed change in mass: decrease,
no change, or increase?
Procedure
SKILLS HANDBOOK
1.B., 1.D., 3.B.
observed class results: decrease, no
change, or increase? 1. Put on your eye protection and lab apron.
Part A: Iron(III) Nitrate

Experimental Design and sodium Hydroxide
You will investigate two different chemical reactions.
2. Practise holding the empty test tube with tongs
For each reaction, you will measure the total mass of
and sliding it into the empty Erlenmeyer fl ask.
reactants before the reaction. You will also measure
Seal the fl ask to check that the test tube fi ts and
the total mass of products aft er the reaction. You will
that the stopper forms a tight seal.
compare the total mass of reactants with the total
mass of products. 3. Measure 5 mL of sodium hydroxide solution in
the 10 mL graduated cylinder. Pour this solution
into the fl ask.

4. Your teacher will assign each lab group a Part B: Antacid tablet in Water
different volume of iron(III) nitrate solution. 11. Add 50 mL of tap water to the plastic cup.
Pour your assigned volume of solution into the
12. Take an antacid tablet out of its package.
small test tube.
13. Place the tablet and the cup of water on the scale.
5. Tilt the fl ask and carefully slide the test tube into
Measure and record the total mass of the cup,
it. Do not allow the test tube’s contents to spill
water, and tablet.
(Figure 1).
14. Add the tablet to the water. Record your
observations.
15. When the visible reaction has stopped, measure
and record the total mass of the cup and its
contents.

(a) Calculate and record the change in mass for each
reaction. Note whether each change resulted in a
Figure 1 The test tube contains iron(III) nitrate solution, and
there is sodium hydroxide solution in the bottom of the flask. decrease, no change, or an increase in mass. K/U
(b) Compare your results from Part A with

6. Seal the fl ask with the stopper. other students’ results. Account for any
7. Measure and record the total mass of the fl ask discrepancies. T/I
and its contents. (c) For Part A, calculate and record the average
8. Slowly tip the fl ask to allow the two solutions to change in mass for your class. K/U
mix (Figure 2). (d) Compare your results from Part B with
other students’ results. Account for any
discrepancies. T/I
(e) Compare your results in Part A with your results

in Part B. Suggest a reason for the differences. T/ I
(f) For Part B, calculate and record the average

change in mass for your class. K/U
(g) Would the class results for Part B differ if the

reaction were carried out in a sealed container?
Figure 2 The iron(III) nitrate solution is now mixed with the Explain. T/I
sodium hydroxide solution in the flask.

(h) Why would it be unsafe to conduct Part B in a
9. Measure and record the total mass of the fl ask sealed container? T/I
and its contents. (i) Answer the Question posed at the beginning of
10. Return the fl ask and all its contents to your this investigation. C
teacher for disposal. (j) Compare your answer in (i) with your
Prediction. Account for any differences. A

6.3 Conserving Mass in Chemical Reactions
Think again about Investigation 6.2: Is Mass Gained or Lost During
a Chemical Reaction? In Part A, you saw that when two solutions are
combined to form a product in a sealed container, the total mass of reactants
equals the total mass of products. No mass is gained; none is lost. In other
words, mass is conserved during the chemical reaction.
Is mass conserved in other chemical reactions as well? The answer to this
question may not be immediately obvious. Aft er all, everyday experience
may suggest that mass does change during a chemical reaction. For
example, a campfi re burns down to a pile of fl uff y ashes that have much
less mass than the original wood (Figure 1). One of the first scientists to
study this question was the eighteenth-century French chemist Antoine
Lavoisier. Until this time, chemists had not considered the possibility that
some reactions could involve gases. Gases, like other forms of matter, have
Figure 1 Wood disappears to almost
mass. In his experiments, Lavoisier used equipment designed to trap all the
nothing when it burns. How does this
reaction obey the law of conservation reactants and products, including any gases produced during the reactions.
of mass? Lavoisier found that mass was always conserved if all the reactants and
products were considered.
Lavoisier’s conclusion has been supported by the work of many other
law of conservation of mass the scientists and is now considered to be a scientific law. It is known as the
statement that, in any given chemical law of conservation of mass:
reaction, the total mass of the reactants
equals the total mass of the products
In any given chemical reaction, the total mass of the reactants equals
the total mass of the products.
The law of conservation of mass makes sense when you consider what
is occurring at the atomic level. (Recall the Bohr–Rutherford model
in Section 5.4.) Experiments have shown that, during a chemical
reaction, the atoms in reactant molecules are rearranged to form
products. Therefore, all the atoms that existed in the reactants
are still present in the products of the reaction. Atoms cannot
be created or destroyed. That explains why the total mass of
reactants is equal to the total mass of products.
Reactions, Equations, and

the Conservation of Mass
In Section 6.1, you learned that chemical equations can
provide a lot of information about chemical reaction. Equations
give the formulas and physical state of the reactants and products.
To be a completely accurate description of the chemical reaction, an
equation must also follow the law of conservation of mass. It must show
Figure 2 There are two (red) oxygen an equal number of each kind of atom on both sides of the equation. This
atoms and one (black) carbon atom on
either side of the scale. Similarly, there
indicates that there are equal numbers of each kind of atom before and after
are two oxygen atoms and one carbon the chemical reaction takes place.
atom on either side of the arrow in the Let’s consider the reaction in which carbon and oxygen react to form
chemical equation. carbon dioxide (Figure 2):
C(s) + O2(g) → CO2(g)

Note that the same numbers and kinds of atoms are present on both LeaRning Tip
sides of the equation. The product (carbon dioxide) contains exactly the Diatomic Molecules
same numbers and kinds of atoms as the reactants (carbon and oxygen). Remember that some elements exist
Therefore, the chemical equation obeys the law of conservation of mass. as diatomic molecules. Refer back to
Table 1 in Section 5.10.
Let’s look at another chemical equation:
H2(g) + Cl2(g) → HCl(g)
This equation does not accurately describe the reaction between hydrogen
and chlorine. Can you tell why? Count the atoms on each side of the arrow.
In this reaction, two atoms of hydrogen react with two atoms of chlorine.
(Remember that hydrogen and chlorine both exist as diatomic molecules.)
The product, however, contains only one atom of hydrogen and one of
chlorine (Figure 3(a)). One atom of hydrogen and one atom of chlorine
remain unaccounted for. An equation in which the reactants and products are
not balanced is sometimes called a “skeleton equation.” Since atoms cannot
just vanish, we can assume that two molecules of HCl(g) are produced in this
reaction. Laboratory investigations indicate that this is the case (Figure 3(b)).
To show that two hydrogen chloride molecules are produced in this LeaRning Tip
reaction, the coefficient “2” is placed before HCl(g) in the chemical equation: Coefficients versus Subscripts
Do not confuse coefficients with
H2(g) + Cl2(g) → 2 HCl(g) subscripts in chemical formulas.
The coefficient in a chemical equation applies to all the atoms in the Coefficients give the ratio of reactants
molecule. “2 HCl” means that there are two molecules of hydrogen chloride, and products in a reaction. Subscripts
give the ratio of elements in a chemical
each containing one hydrogen atom and one chlorine atom. formula; they cannot change in a given
Now the chemical equation obeys the law of conservation of mass. chemical. Thus, chemical equations can
Chemical equations must always be balanced, with the same kinds and same be balanced only by using coefficients.
numbers of atoms on both sides of the arrow.
Reading Tip
Adjusting Inferences
Sometimes as you continue reading,
you come across information that
conflicts with an inference that you have
already made. For example, you read
that an equation must obey the law of
conservation of mass. Later you read a
chemical equation that appears to break
this fundamental law. You infer that
exceptions are possible. Later you read
that the equation as stated is incorrect.
You revise your inference and conclude
that the law of conservation of mass is
unbreakable.
(a)
Figure 3 In (a), there are two (white)
hydrogen atoms and two (green)
chlorine atoms on the left side of the
scale, but only one hydrogen atom and
one chlorine atom on the right side.
In (b), there are two hydrogen atoms
and two chlorine atoms on each side of
the scale. Reactants and products are
(b) balanced.
NEL 6.3 Conserving Mass in Chemical Reactions 231

T RY THIS MOdeLLing BaLanCed CHeMiCaL eQUaTiOnS
SKILLS: Observing, Predicting, Analyzing
In this activity, you will use molecular models to visualize the law 3. Build two molecules of hydrogen peroxide, H2O2. Predict how
of conservation of mass. many molecules of oxygen and water can be made from
Equipment and Materials: molecular model kit them. Verify your prediction.
4. Build two molecules of ammonia, NH3. Imagine that this is the
1. Build one molecule of hydrogen, H2. Build one molecule
product of a reaction between hydrogen and nitrogen. Predict
of bromine, Br2. Predict how many molecules of hydrogen
how many molecules of hydrogen and nitrogen are required to
bromide, HBr, can be made from these two models. Verify your
make two molecules of ammonia. Check your prediction.
prediction by making the “product” from the “reactants.”
A. Write the word equations and chemical equations for each of
2. Build two molecules of hydrogen and one molecule of
these four reactions. K/U
oxygen. Predict how many molecules of water, H2O, can
be made from them. Verify your prediction by making B. Explain how the results of this activity illustrate the law of
the product. conservation of mass. T/I
in SUMMARY
• Th
e law of conservation of mass states that in • Coeffi
cients are added before chemical formulas
any given chemical reaction, the total mass of the in a chemical equation to ensure that the
reactants equals the total mass of the products. numbers of atoms on each side of the arrow are
• Chemical equations obey the law of conservation equal (balanced).
of mass. They show that all the atoms in the
reactants are still present in the products.
CHECK YOUR LeaRning

1. (a) The idea that gases have mass can be difficult 4. You might have noticed that new copper roofs turn
to accept. How has this reading helped your green over time. This occurs because copper reacts with
understanding of this concept? substances in the air to form a hard, protective coating.
(b) Identify what remains unclear. Discuss this with Will the mass of the new copper roof increase or decrease
your teacher. C over time? Explain. Does this prediction violate the law of
conservation of mass? Explain. T/I A
2. (a) State the law of conservation of mass.
5. Design an experiment involving the reaction of vinegar and
(b) Explain the law of conservation of mass by referring
baking soda to test the law of conservation of mass. T/ I
to the atoms involved in a chemical reaction.
6. A 20 g sample of compound A is mixed with 45 g of
(c) Which best represents the law of conservation of
compound B. A chemical reaction occurs in which a gas is
mass: a skeleton equation or a balanced chemical
produced. Once the reaction is complete, the final mixture
equation? Explain. K/U
has a mass of 55 g. T/I
3. Are the following situations exceptions to the law of
(a) What is the mass of the gas?
conservation of mass? Justify your answer in each
case. K/U (b) What assumption did you make in (a)?
(a) The mass of a hamburger decreases as it is barbecued. 7. Soon after learning about the work of Lavoisier, John
Dalton proposed that atoms are never created or
(b) A tree’s mass is continually increasing as the tree grows.
destroyed in chemical reactions, only rearranged. Explain
(c) The mass of a copper penny increases if it is heated in how this statement applies to the law of conservation of
a Bunsen burner flame. mass. A
(d) You are often lighter in the morning than you were
when you went to bed.

Information in Chemical Equations 6.4
What is a cookie recipe doing in a science textbook (Figure 1)? Believe it
or not, recipes and balanced chemical equations have a lot in common. A
recipe provides more than just a list of required ingredients. It provides the
quantities of each ingredient. It also tells us the conditions under which the
ingredients are combined. Recipes also tell you how much product to expect.
Chemical equations give us similar information (Table 1).
1 cup butter at room temperature

Turn on the oven to 170 °C. 1 ½ cups brown sugar
Place the first five ingredients in the mixing 2 eggs
bowl, one at a time, mixing well after each 1 teaspoon vanilla essence
addition. In a cup, dissolve the baking soda in 1 teaspoon salt
the hot water, then add it to the mixing bowl. ½ teaspoon baking soda
Add the flour, oats, and chocolate chips. Mix 1 tablespoon hot water
well. Drop in spoonfuls onto cookie sheets. 1 ½ cups unbleached flour
Bake in the oven until starting to turn golden. 1 ½ cups rolled oats Figure 1 A cookie recipe has some
Makes about 50 cookies. 1 ½ cups chocolate chips features in common with a chemical
equation.
Table 1 Comparison of Recipes and Chemical Equations
Recipe Chemical equation

Information
communicated See Figure 1. 2 H2(g) + O2(g) → 2 H2O(g)
starting materials ingredients list (e.g., eggs and chemical symbols for the reactants
butter) (to the left of the arrow)
(e.g., 2 H2(g) and O2(g))
conditions of starting directions (e.g., butter at room state symbols: (s), (l), (g), (aq)
materials temperature) (e.g., 2 H2(g))
proportions of quantities in ingredients list coefficients of reactants
starting materials (e.g., 2 eggs, 1 cup butter) (e.g., 2 H2(g))
instructions for directions (e.g., mixing well after plus sign (+) between the formulas
combining materials each addition) of the reactants, indicating that
reactants must come into contact
(e.g., 2 H2(g) + O2(g))
resulting product title (e.g., Chocolate Chip chemical symbols for the products
Oatmeal Cookies) (to the right of the arrow)
(e.g., 2 H2O (g))
proportions/ final sentence (e.g., Makes about coefficients of products
quantities of product 50 cookies.) (e.g., 2 H2O (g))
Now you know what the various parts of a balanced chemical equation
represent. The next stage is to learn how to balance chemical equations.
Balancing Chemical Equations

To learn how to balance a chemical equation, let’s work through some
Sample Problems. To make things simpler when we are learning to balance
equations, we will not use state subscripts for now.
NEL 6.4 Information in Chemical Equations 233

sAMPlE PRoBlEM 1 Balancing a Chemical Equation
Write the balanced chemical equation for the reaction of magnesium with oxygen.
step 1 Write the word equation for the reaction.
magnesium + oxygen → magnesium oxide
step 2 Replace each chemical name with the correct chemical formula. (This is the
skeleton equation.)
Mg + O2 → MgO
step 3 Count the number of atoms of each type on either side of the arrow.
Mg + O2 → MgO
1 Mg atom 1 Mg atom
2 O atoms 1 O atom
step 4 Multiply the formulas by an appropriate coefficient until all the atoms are
balanced. Keep checking whether the numbers of each type of atom on both
sides are balanced.
LeaRning Tip
• MgO (on the right) must be multiplied by the coefficient 2 to balance the
Better Balancing oxygen atoms.
When balancing a chemical equation,
start by balancing the element(s) that Mg + O2 → 2 MgO
occurs only once on both sides of the • Mg (on the left) must now be multiplied by the coefficient 2 so that there are
equation. Also, leave any substances two Mg atoms on both sides.
appearing as elements in the equation
The final balanced chemical equation is
until the end since they can be balanced
without affecting any other atom types. 2 Mg + O2 → 2 MgO
Keep checking as you go along because
balancing one element may “unbalance” Practice
another. Write a balanced chemical equation for the reaction between potassium and bromine to
make potassium bromide.
sAMPlE PRoBlEM 2 Balancing a Chemical Equation

Methane gas, CH4, burns in oxygen to produce carbon dioxide and water (Figure 2).
Write a balanced chemical equation for this reaction.
step 1 methane + oxygen → carbon dioxide + water
step 2 CH4 + O2 → CO2 + H2O
step 3 CH4 + O2 → CO2 + H2O

1 C atom 1 C atom
4 H atoms 2 H atoms
2 O atoms 3 O atoms (2 + 1)
step 4 Check whether the numbers of each type of atom on both sides are balanced.
• Carbon is already balanced.
• H2O must be multiplied by 2 to balance hydrogen atoms.
CH4 + O2 → CO2 + 2 H2O
1 C atom 1 C atom
4 H atoms 4 H atoms Figure 2 Methane makes up about
2 O atoms 4 O atoms (2 + 2) 80 % of the natural gas burned in a
natural gas furnace.

• O2 must be multiplied by 2 to balance oxygen atoms. H2O
CH4 + 2 O2 → CO2 + 2 H2O O2
1 C atom 1 C atom
4 H atoms 4 H atoms
+ +
4 O atoms 4 O atoms
CH4 CO2
All the atoms balance, so the final balanced
O2
chemical equation is H2O
CH4 + 2 O2 → CO2 + 2 H2O (Figure 3) Figure 3
Practice
Write a balanced chemical equation for the reaction between oxygen and a hydrocarbon
called pentane, C5H12, to produce carbon dioxide and water.
Our third example shows how to balance equations involving polyatomic

ions. In these cases, consider the polyatomic ion as one unit rather thanC06-F12-UBOS10SB.ai
as
individual atoms.
sAMPlE PRoBlEM 3 Balancing an Equation Involving

Polyatomic Ions
Ontario
Zinc metal reacts in a silver nitrateScience
solution 10 SB
to produce zinc nitrate and silver metal.
0-17-635528-6
Write a chemical equation for this reaction. (See Table 1 in Section 5.9 for a list of
polyatomic ions.) FN C06-F12-UBOS10SB
CO CrowleArt Group
step 1 zinc + silver nitrate → zinc nitrate + silver
Deborah Crowle
step 2 Zn + AgNO3 → Zn(NO3)2 + Ag
Pass 1st pass
step 3 Zn + AgNO3 →Approved
Zn(NO3)2 + Ag
1 Zn atom 1 ZnApproved
Not 2+
ion
1 Ag+ ion 1 Ag atom
1 NO3– ion 2 NO3– ion
step 4 Check whether the numbers of each type of atom on both sides are balanced.
Because each polyatomic ion generally stays intact, you can count polyatomic
ions in the same way as you count atoms.
• Zinc and silver are already balanced.
• AgNO3 must be multiplied by 2 to balance nitrate ions.
• Zn + 2 AgNO3 → Zn(NO3)2 + Ag
1 Zn atom 1 Zn2+ ion
2 Ag ions
+
1 Ag atom
2 NO3– ions 2 NO3– ions
• Ag+ must be multiplied by 2 to balance the number of silver atoms.
The final balanced chemical equation is
Zn + 2 AgNO3 → Zn(NO3)2 + 2 Ag
Practice
Write a balanced chemical equation for the reaction between iron(III) nitrate and
sodium hydroxide to produce iron(III) hydroxide and sodium nitrate.
NEL 6.4 Information in Chemical Equations 235

RESEARCH THIS gaS FURnaCe TeCHniCian
SKILLS: Researching, Evaluating SKILLS HANDBOOK
4.A.
Many careers involve chemical reactions and the delicate balance A. List the educational background and training required to be
between the reactants. Consider the responsibilities of the people a gas furnace technician. T/I
who install, service, and repair gas furnaces. If the reactants B. Write balanced chemical equations for at least two chemical
(natural gas and oxygen) are not available in the appropriate reactions that furnace technicians must know about. K/ U T/ I
ratios, the outcome could be deadly.
C. Write a paragraph explaining why this would, or would not,
1. Research this career, paying particular attention to the be a good career for you. C A
training required.
2. Research the main dangers of badly installed or poorly Go to NElsoN sCIENCE
maintained gas furnaces.
in SUMMARY
• Chemical equations contain information about • Coeffi
cients can be added before chemical
which substances are reactants and which are formulas in a chemical equation to make the
products, and the ratios of these substances. numbers of atoms in reactants and products
• Chemical equations obey the law of conservation balance.
of mass.
CHECK YOUR LeaRning

1. What strategy for balancing chemical equations did you find 7. Balance the following skeleton equations if they are not
particularly useful? Share this strategy with a classmate already balanced. (It does not matter if you do not know the
who is having difficulty with balancing equations. K/U C names of all the compounds, but you must recognize the
2. What is the difference between a skeleton equation and a polyatomic ions. You do not need to add state symbols.) T/I
balanced chemical equation? K/U (a) Ca + Cl2 → CaCl2
3. Consider this skeleton equation: HI → H2 + I2 K/U (b) K + Br2 → KBr
(a) Which of the following two equations is the correct (c) H2O2 → H2O + O2
balanced chemical equation? (d) Na + O2 → Na2O
(e) N2 + H2 → NH3
2 HI → H2 + I2 or H2I2 → H2 + I2
(f) NH4OH + HBr → H2O + NH4Br
(b) Explain your answer.
(g) CaSO4 + KOH → Ca(OH)2 + K2SO4
4. (a) What is the difference between a subscript and a (h) Ba + HNO3 → H2 + Ba(NO3)2
coefficient in a chemical equation?
(i) H3PO4 + NaOH → H2O+ Na3PO4
(b) Which is the only one that can be changed as you (j) C3H8 + O2 → CO2 + H2O
balance a skeleton equation? Why? K/U
(k) Al4C3 + H2O → CH4 + Al(OH)3
5. Write a balanced chemical equation for each of the (l) FeBr3 + Na → Fe + NaBr
following reactions taking place in water: K/U (m) Fe + H2SO4 → H2 + Fe2(SO4)3
(a) potassium iodide → potassium and iodine (n) C2H6 + O2 → CO2 + H2O
(b) magnesium + silver nitrate → silver + magnesium nitrate 8. Ammonium dichromate, (NH4)2Cr2O7, is an orange solid
(c) sodium + water → hydrogen + sodium hydroxide that releases nitrogen gas and water vapour when it is
(d) lead(II) nitrate + sodium chloride → heated. The green solid produced in this reaction is a toxic
lead(II) chloride + sodium nitrate form of chromium oxide. K/U T/I
6. Octane, C8H18, is a compound in gasoline. Octane burns in (a) Write a word equation for this reaction.
oxygen to produce carbon dioxide gas and water vapour. T/I (b) When 2.5 g of ammonium dichromate is heated, the
(a) Write a balanced chemical equation for this reaction mass of nitrogen and water vapour released is 1.0 g.
(b) How many carbon dioxide molecules are produced for What is the final mass of the solid product?
every octane molecule that burns?

Types of Chemical Reactions: Synthesis 6.5
and Decomposition
There are currently about 10 million known compounds. Each compound
can react in many different ways. It is impossible for anyone to memorize all the LeaRning Tip
reactions. To make it easier to predict what reactions will take place, chemists State Symbols
have grouped similar reactions into categories. It is good practice to write state
symbols after chemical formulas to
One way of grouping chemical reactions is based on recognizing patterns
clarify the states of the chemicals
in the chemical formulas. For example, Figure 1 shows three chemical during the reaction. For example,
reactions that at first seem unrelated. But when you compare the chemical HCl(g) tells us that the hydrogen
equations for these reactions, a pattern emerges. Can you tell what it is? chloride exists as a gas.
(a) (b) (c)
Zn(s) + S(s) → ZnS(s) 2 Na(s) + Cl2(g) → 2 NaCl(s) HCl(g) + NH3(g) → NH4Cl(s)

Figure 1 (a) Powdered zinc metal reacts with sulfur to produce zinc sulfide powder. (b) A small
piece of sodium metal ignites as it is placed in a flask of chlorine gas (yellowish gas). (c) Hydrogen
chloride gas and ammonia gas both diffuse out of their aqueous solutions. When the two gases
come in contact, they react to produce a cloudy white powder of ammonium chloride.
synthesis Reactions
The three reactions shown in Figure 1 are examples of synthesis reactions. In
a synthesis reaction, two simple reactants combine to make a larger or more synthesis reaction a reaction in which
complex product (Figure 2). The chemical equations for synthesis reactions two reactants combine to make a larger
or more complex product; general pattern:
follow the general pattern:
A + B → AB
A + B → AB
A + B A B
Figure 2 In some cases, the reactants are atoms (elements), while in others, they are molecules
(elements or compounds).
NEL 6.5 Types of Chemical Reactions: Synthesis and Decomposition 237

Table 1 shows how the three synthesis reactions in Figure 1, on the
previous page, follow the general pattern.
Table 1 Examples of Synthesis Reactions
Synthesis reaction Equation
zinc sulfide zinc + sulfur → zinc sulfide

(Figure 1(a)) Zn(s) + S(s) → ZnS(s)
sodium chloride sodium + chlorine → sodium chloride
(Figure 1(b)) 2 Na(s) + Cl2(g) → 2 NaCl(s)
ammonium chloride ammonia + hydrogen chloride → ammonium chloride
(Figure 1(c)) NH3(g) + HCl(g) → NH4Cl(s)
General pattern A + B → AB
Decomposition Reactions
We can think of decomposition reactions as being the opposite of synthesis
decomposition reaction a reaction in reactions. During a decomposition reaction, large compounds are broken
which a large or more complex molecule down into smaller compounds or elements (Figure 3). The general pattern
breaks down to form two (or more) simpler
products; general pattern: AB → A + B
for decomposition reactions is
AB → A + B
A B A + B
Figure 3 In a decomposition reaction, a complex molecule breaks down, or decomposes, into

simpler products. The products can be elements or compounds.
LeaRning Tip Decomposition reactions usually absorb energy (such as thermal or

Just the Opposite electrical energy) from an external source. This energy is then used to
Decomposition reactions (AB → A + B) convert reactants into products. For example, water can be decomposed into
are the reverse of synthesis reactions its elements using electricity as its energy source.
C06-F14-UBOS10SB.ai
(A + B → AB).
Table 2 shows how two decomposition reactions follow the general pattern.
Table 2 Examples of Decomposition Reactions
Decomposition reaction Equation
water energy + water → hydrogen + oxygen

energy + 2 H2O(l) → 2 H2(g) + O2(g)
sodium azide energy + sodium azide → sodium + nitrogen
2 NaN3(s) → 2 Na(s) + 3 N2(g)
General pattern AB → A + B
0-17-635528-6
FN C06-F14-UBOS10SB
CO Many
CrowleArt nitrogen compounds undergo important decomposition reactions.
Group
Deborah Crowle the use of airbags in cars is a lifesaving application of a
For example,
Figure 4 Airbags are designed to slow decomposition reaction (Figure 4). Airbags contain a nitrogen compound
Pass
your forward motion during a collision. 2nd pass
called sodium azide, NaN3(s). During a collision, a sudden flow of electricity
An airbag inflatesApproved
in about 1/20th of a
second and staysNotfully Approved
inflated for only is automatically sent to the airbag. This electrical energy triggers the rapid
about 1/10th of a second. decomposition of sodium azide to produce nitrogen gas and sodium metal.

RESEARCH THIS PROPOSaL TO Ban FeRTiLiZeRS
SKILLS: Researching, Analyzing the Issue, Defending a Decision, Communicating SKILLS HANDBOOK
4.A., 4.C.
Ammonium nitrate is one of the cheapest and most widely used
fertilizers. However, it can also be used to make explosives (Figure 5):
ammonium nitrate → water + nitrogen + oxygen + energy
2 NH4NO3(s) → 4 H2O(g) + 2 N2(g) + O2(g) + energy
Because of this, some politicians have proposed that the sale of
ammonium nitrate should be restricted or banned.
1. Research the facts regarding the use of ammonium nitrate as
a fertilizer and in the manufacture of explosives.
2. Research the arguments for and against the proposed ban.
3. Organize your findings in a “pros” and “cons” chart. T/I C
A. Do you think the proposed ban is fair? Defend your decision Figure 5 A few well-placed explosive charges can demolish old,
in a letter to a local politician. C vacant buildings quickly and safely. Many explosives release
their destructive energy through decomposition reactions.
in SUMMARY
• Chemical reactions are grouped into categories. • In a decomposition reaction, a complex reactant
Within each category, the reactions follow the breaks down to make two or more simpler
same pattern. product and follow the general pattern
• In a synthesis reaction, two simple reactants AB → A + B.
combine to make a larger or more complex
product and follow the general pattern
A + B → AB.
CHECK YOUR LeaRning

1. Classify each of the following as either a synthesis or a 4. Write a balanced chemical equation for each of the
decomposition reaction: K/U following reactions. Include state symbols. Classify each
(a) zinc chloride → zinc + chlorine one as either synthesis or decomposition. K/U T/I
(b) potassium + iodine → potassium iodide (a) Hydrogen gas reacts explosively with chlorine gas to
form hydrogen chloride gas.
(c) potassium oxide + water → potassium hydroxide
(b) A solution of hydrogen peroxide, H2O2, breaks down
(d) calcium carbonate → calcium oxide + carbon dioxide
into water and oxygen.
2. Write a balanced chemical equation for each of the word
(c) Solid potassium chlorate breaks down into solid
equations given in question 1. K/U T/I
potassium chloride and oxygen when heated.
3. Copper metal was first made over 3 000 years ago by
(d) Ammonia gas, NH3, can be made by combining
heating a mineral containing copper(II) oxide. The other
hydrogen gas and nitrogen gas.
product of this reaction is oxygen. K/U T /I
(e) Aluminum metal reacts with oxygen from the air to
form a hard coating of aluminum oxide. This coating
(b) Is this a synthesis reaction or a decomposition prevents aluminum objects from corroding.
reaction? Explain.
(c) Write a balanced chemical equation for the reaction.
NEL 6.5 Types of Chemical Reactions: Synthesis and Decomposition 239

6.6 Types of Chemical Reactions:
Single and Double Displacement
Magnesium metal is one of the most combustible substances in your school’s
chemical storeroom. Most fires can be extinguished with a standard carbon
dioxide fire extinguisher. A magnesium fire is particularly dangerous
because spraying carbon dioxide onto it only makes it worse (Figure 1).
single Displacement Reactions

The word and chemical equations for the reaction of magnesium with carbon
Figure 1 The beaker contains solid
dioxide are
carbon dioxide that quickly sublimates magnesium + carbon dioxide → magnesium oxide + carbon
to release carbon dioxide gas. This 2 Mg(s) + CO2(g) → 2 MgO(s) + C(s)
gas then reacts vigorously with hot
magnesium metal. This reaction is an example of a single displacement reaction. In a
single displacement reaction, one element displaces or replaces an element
single displacement reaction a reaction
in a compound (Figure 2). The general pattern for this type of reaction is
in which an element displaces another
element in a compound, producing a new A + BC → AC + B
compound and a new element
A represents an element; BC represents a compound.
A BC AC B
+ +
To see a dramatic video of the
reaction of magnesium and
carbon dioxide, Figure 2 In a single displacement reaction, one element, A, displaces element B in a compound,
Go to NElsoN sCIENCE BC. The new compound, AC, is one product. The displaced element, B, is the second product.
LeaRning Tip Notice how the chemical equation for the reaction of magnesium with
Non-Metals Place Second carbon dioxide is similar to this general pattern. In single displacement
Remember that the second element reactions involving an ionic compound and a metal, it is always the positive
in a chemical compound is almost ion (cation) that is replaced in the compound.
always a non-metal. That is why, in
Single displacement reactions oft en occur in aqueous solution. Figure 3
Figure 2, element C is written second
in both compounds: BC and AC. shows what happens when a coiled copper wire is placed into a solution of
silver nitrate:
copper + silver nitrate → copper(II) nitrate + silver
Cu(s) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 Ag(s)
Figure 3 (a) A coil of copper wire is

placed into a solution of the silver nitrate.
(b) The fuzzy coating on the copper
wire is silver metal. The solution is blue (a) (b)
because of dissolved Cu2+(aq) ions.

Single displacement reactions also occur when metals are placed into
acids. The chemical formula of any acid includes one or more hydrogen
atoms. (For example, the chemical formula for hydrochloric acid is
HCl(aq).) In these reactions, metal atoms displace the hydrogen atoms
in the compound. Figure 4 shows the reaction of zinc metal and
hydrochloric acid:
zinc + hydrochloric acid → hydrogen + zinc chloride
Zn(s) + 2 HCl(aq) → H2(g) + ZnCl2(aq)
Hydrogen, you will recall, forms diatomic molecules. That is why the
chemical formula for hydrogen is H2 rather than H.
Displacement Reactions in Mining

Metals rarely occur naturally as pure elements. Instead, they combine with
other elements to form rock deposits called ores. Nickel, for example, occurs
in rock as nickel sulfide. The processing of nickel ore is called smelting.
The first step in smelting is converting nickel sulfide into nickel oxide. Figure 4 Zinc reacts in hydrochloric
acid. As zinc displaces the hydrogen
Nickel oxide is then burned with coke (carbon) to produce pure nickel and in the acid, bubbles of hydrogen gas
poisonous carbon monoxide: appear on the surface of the zinc.
C(s) + NiO(s) → Ni(s) + CO(g)

Note that the chemical equation for smelting fits the general pattern of
single displacement reactions.
The factory in which this process occurs is called a smelter. Another of
the products of processing nickel is sulfur dioxide. As you will learn in the
next chapter, sulfur dioxide emissions from nickel smelters are responsible
for some of the damage caused by acid precipitation.
RESEARCH THIS WHen gOLd LOSeS iTS gLiTTeR

SKILLS HANDBOOK
SKILLS: Defining the Issue, Researching, Communicating
4.A., 4.C.
The cyanide process is one of the most effective methods of Consider this scenario. A company wants to mine a newly
extracting gold from rock. However, it is controversial because discovered gold deposit near a remote town in northern Ontario.
it uses sodium cyanide—a highly toxic substance. The used The president of the company has invited the following people to
cyanide must be collected, stored, and treated to keep it out discuss the project:
of the environment (Figure 5). • the mayor of the town
• a representative from the Ministry of the Environment
• the leader of a First Nations group
• a member of a local non-governmental environmental group
1. Take the role of one of the four people at the meeting.
2. Research background information to support your role,
including the history of cyanide use in gold processing.
A. In your role, summarize your perspective on the
development of the mine. Present your perspective as an
opening argument. T/I C
Figure 5 Water from gold mines is treated to remove the cyanide
before being released into the environment.
NEL 6.6 Types of Chemical Reactions: Single and Double Displacement 241
Double Displacement Reactions
double displacement reaction a reaction Double displacement reactions occur when two elements in different
that occurs when elements in different compounds trade places (Figure 6). The general pattern for these reactions is:
compounds displace each other or exchange
places, producing two new compounds AB + CD → AD + CB
The symbols A, B, C, and D represent atoms, single ions, or polyatomic ions.
LeaRning Tip
AB CD AD CB
Polyatomic Ions
Treat polyatomic ions as a single unit
in a chemical equation. In a double + +
displacement reaction, a polyatomic
ion (such as the nitrate ion, NO3−) can
change places with an ion composed Figure 6 In a double displacement reaction, the two non-metals, B and D, trade places.
of only one atom (such as chloride, Cl−). Alternatively, you could think of it as the two metals, A and C, switching over.
DID YOU KNOW?

Many double displacement reactions occur between two ionic compounds
in solution. For example, Figure 7 shows the reaction of a solution of silver
Heavy Metals Banned
Heavy metals such as lead, cadmium, nitrate with a solution of sodium chloride. In this reaction, nitrate ions
and mercury are very toxic. Solutions and chloride ions trade places. The word and chemical equations for this
containing cations of these metals are reaction are as follows:
also dangerous. For this reason, many
school boards have banned their use.
silver nitrate + sodium chloride → silver chloride + sodium nitrate
Even in schools where they are not AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq)
banned, they are generally only used
Notice that both the word and chemical equations fit the general pattern
in very small quantities. After use, they
are collected in special containers so for this reaction:
that as little as possible is released AB + CD → AD + CB
into the environment. What is your
school’s policy on heavy metals?
Figure 7 (a) When silver nitrate solution

is added to sodium chloride solution,
specks of silver chloride appear. (b)
When silver nitrate solution is added
to tap water, a faint haze appears. This
haze indicates that chloride ions are
present in the water—perhaps from
road salt. (a) (b)
Forming a Precipitate
Look closely at the chemical equation for the reaction in Figure 7. Note that the
reactants are both in solution (aq), and so is one of the products: sodium nitrate.
The other product, silver chloride, is a solid (s). Chemists have discovered,
through experimentation, that some ionic compounds do not dissolve in water.
If these insoluble compounds are formed during a reaction, they become visible
precipitate a solid formed from the as a precipitate: tiny specks of solid material in the solution. The silver chloride
reaction of two solutions
formed in Figure 7 is a precipitate.

Not all double displacement reactions result in the formation of a
precipitate, but many do. Lead(II) nitrate and potassium iodide are both
soluble in water. When their solutions are mixed, a bright yellow precipitate
of lead(II) iodide appears (Figure 8).
AB + CD → AD + CB
lead(II) nitrate + potassium iodide → lead(II) iodide + potassium nitrate
Pb(NO3)2(aq) + 2 KI(aq) → PbI2(s) + 2 KNO3(aq)
Figure 8 The bright yellow precipitate
is insoluble lead(II) iodide. It is produced Potassium iodide can be used to test for Pb2+ ions in water: a yellow
when a solution containing Pb2+ ions is precipitate indicates that lead ions are present.
mixed with a solution containing I− ions.
in SUMMARY
• In a single displacement reaction, an element and • Sometimes, in a reaction of aqueous
a compound react to produce a different element reactants, one of the products is insoluble.
and compound and have the general pattern This product, called a precipitate, appears
A + BC → AC + B. as a solid in the solution.
• In a double displacement reaction, two
compounds react to produce two different
compounds and have the general pattern
AB + CD → AD + CB.
CHECK YOUR LeaRning

1. Compare single and double displacement reactions. K/U 7. The dark tarnish that sometimes forms on silver is silver
2. What types of reactants are likely to be involved in sulfide, Ag2S. A common home remedy for tarnish is
(a) a single displacement reaction? represented by the chemical equation
(b) a double displacement reaction? K/U 3 Ag2S(s) + 2 Al(s) → 6 Ag(s) + Al2S3(s) (Figure 9) K/U A
3. Classify the following word equations as representing (a) Classify the reaction as a single displacement or a
either single or double displacement reactions: K/U double displacement reaction.
(a) aluminum + iron(III) oxide → aluminum oxide + iron (b) Which method do you think is better for cleaning
(b) barium chloride + sodium sulfate → silverware: the method described in (a) or scrubbing
barium sulfate + sodium chloride and polishing? Why?
(c) zinc + copper(II) sulfate → zinc sulfate + copper
(d) silver nitrate + sodium phosphate →
silver phosphate + sodium nitrate
(e) calcium + water → hydrogen + calcium hydroxide
4. Rewrite the word equations in question 3 as balanced
chemical equations (without state symbols). K/U T/I
5. Consider the chemical equation Figure 9 To remove the tarnish from silverware, soak it
CuSO4(aq) + Fe(s) → FeSO4(aq) + Cu(s). K/U A in a hot solution of baking soda in an aluminum pan.
(a) Classify the reaction as a single displacement or a 8. The fuzzy silver coating in Figure 3 of this section is impure
double displacement reaction. silver. It can be converted back into silver nitrate by reacting
(b) Copper compounds such as copper(II) sulfate are toxic. it with nitric acid, HNO3(aq), as shown:
Before disposal, these compounds must be treated to Ag(s) + HNO3 (aq) → AgNO3(aq) + NO2(g) + H2O(l) K/U T/I A
reduce their toxicity. Describe how to use steel wool (a) Balance the equation.
(which is made mostly of iron) to remove the Cu2+ ions (b) What has to be done to the reaction mixture to recover
from an aqueous solution of copper(II) sulfate. solid silver nitrate?
6. Firefighters suggest that the best way to put out a (c) Why must this process be done in a well-ventilated
magnesium fire is to pour sand or salt over it. Why is this area? (Hint: see Figure 1 in Section 5.10.)
better than using a carbon dioxide fire extinguisher? A
NEL 6.6 Types of Chemical Reactions: Single and Double Displacement 243
Synthesis and Decomposition Reactions SKILLS MENU

Do you remember hearing a loud “pop” in Activity 5.2, when you held a Hypothesizing Observing
burning splint at the mouth of a test tube containing hydrogen gas? You Planning Evaluating
were hearing evidence of a synthesis reaction: Controlling Variables Communicating
2 H2(g) + O2(g) → 2 H2O(g) + energy

Many metals also undergo synthesis reactions with oxygen to form
oxides. In this activity, you will consider two such reactions. You
will also look at two decomposition reactions. The second one—the
decomposition of hydrogen peroxide—normally occurs very slowly.
Fortunately, there are substances that speed up this reaction without
being consumed themselves. In this activity you will use iron(III) nitrate
to help hydrogen peroxide decompose.
Equipment and Materials Procedure

SKILLS HANDBOOK
1.B., 2.E., 3.B.
• eye protection 1. Put on your eye protection and lab apron.
• lab apron
Part A: Reaction of Metals
• Bunsen burner
with oxygen
• retort stand with clamps
2. Secure a Bunsen burner to a lab stand with a
• spark lighter
clamp. Carefully light the Bunsen burner with a
• tongs spark lighter.
• heat-resistant pad 3. Clean a 5 cm length of copper wire with steel
• 3 test tubes wool until the copper is shiny.
• test-tube rack 4. Hold one end of the wire with tongs. Insert the
• scoopula wire into the hottest part of a Bunsen burner
• test-tube holder fl ame for 20 to 30 s.
• copper wire 5. Remove the wire from the fl ame and allow
• steel wool it to cool on the heat-resistant pad. Look for
• limewater, Ca(OH)2(aq) evidence of a chemical change and record your
mpressed
• copper(II) carbonate, CuCO
dangerously
(s) observations. Save the wire for Part B.
s reactive material 3
• dilute hydrogen peroxide, H2O2(aq) 6. Look at the burning magnesium in Figure 1.
mmable and
mbustible
biohazardous
compressed dangerously Record your observations.
aterial • iron(III) nitrate, Fe(NO
infectious material
gas reactive material) (s)
3 3
• wooden splint
poisonous and
flammable and
infectious material
combustible
biohazardous
idizing
causing immediate infectious material
aterial material
This activity
and serious toxic involves open flames. Tie back long hair and
poisonous and
effects
tuck
oxidizingin loose clothing.
infectious material
poisonous and causing immediate
material
rrosive infectious material and serious toxic
aterial Copper(II)
causing other carbonate is toxic if swallowed.
effects
toxic effects
poisonous and
Limewater,
corrosive hydrogen peroxide,
infectious material and iron(III) nitrate are
irritants. Avoid skintoxic
and eye contact. In case of skin contact,
effects
wash the affected area with a lot of cool water.
Figure 1 Magnesium burns in air.

Part B: Decomposition of 16. Test the gas produced by holding a glowing
Copper(II) Carbonate splint at the mouth of the test tube (Figure 3).
7. Half-fill a test tube with limewater. Place the test
tube in the test-tube rack.
glowing splint
8. Add copper(II) carbonate crystals to another test
tube to a depth of about 2 cm.
9. Hold the test tube in a test-tube holder at an
angle so that the copper(II) carbonate is spread
along the inside of the test tube. gas
10. Gently heat the underside of the test tube in the

Bunsen burner fl ame. Move the test tube back
and forth above the fl ame to evenly distribute
the heat. Note any changes that occur. (Figure 2)
When heating the test tube, do not allow one part of the test
Figure 3 Glowing splint test
tube to heat up more than any other part. Doing so could
cause the contents to be ejected from the test tube.
copper(II) (a) What evidence suggests that chemical changes
carbonate crystals
occur when magnesium and copper are heated? K/U
test tube (b) Write the word and chemical equations for
test tube
clamp
the reactions that occur when magnesium
and copper are heated. (Assume that the most
retort stand
and clamp common ionic charge for copper is +2.) K/U
Bunsen (c) Based on your evidence, what molecular

burner compound is produced when copper(II)
carbonate is heated? What ionic compound
Ontario Science 10 SB remains? Justify your inference. T/I
Figure 2 0-17-635528-6
(d) Write the word and chemical equation for the
11. As the reaction begins, bring the mouth
FN of the decomposition
C06-F31 -UBOS10SBof copper(II) carbonate. K/U
limewater test tube close to the mouth of the (e) What evidence suggests that hydrogen peroxide
test tube being heated. This will allow
CO any gases Creative Freelancers
decomposed into simpler substances? Justify
produced to fl ow into the limewater. your inference. K/U
Sam Laterza
12. Continue heating the test tube until no further (f) Write the word and chemical equations for the
changes are observed. Compare the Passappearance decomposition
Second Pass of hydrogen peroxide. Assume
of the wire from Part A with the contents of the that one of the two products of this reaction is
Approved
hot test tube. Record your observations. liquid water. K/U
MOD. 3/19
13. Look for evidence of chemical change in the
Apply and Extend
SKILLS HANDBOOK
Not Approved 3.B.
limewater. Record your observations.
(g) Many natural chemicals, including substances in
Part C: Decomposition of liver, potatoes, and strawberries, speed up the
Hydrogen Peroxide decomposition of hydrogen peroxide. Design a
14. Place a third test tube in the test-tube rack. Pour controlled experiment that compares how these
hydrogen peroxide solution into the test tube substances affect the reaction. Write your
until it is one-third full. Procedure, including safety precautions. Proceed
15. Add a small amount of iron(III) nitrate (enough with the experiment once your teacher has
to cover the end of a wooden splint) to the approved your proposal. T/I C A
solution. Record your observations.

Displacement Reactions SKILLS MENU

Displacement reactions involve elements displacing other elements from Hypothesizing Observing
their compounds. Table 1 summarizes single and double displacement Planning Evaluating
reactions. How are these reactions similar? How are they different? Controlling Variables Communicating
Table 1 Summary of Single and Double Displacement Reactions

Type of reaction Single displacement Double displacement
general pattern A + BC → AC + B AB + CD → AD + CB
example Zn(s) + Pb(NO3)2(aq) → Zn(NO3)2(aq) + Pb(s) Fe(NO3)3(aq) + 3 NaOH(aq) → Fe(OH)3(s) + 3 NaNO3(aq)
SKILLS HANDBOOK
Purpose Procedure 1.B., 3.B.
To observe and compare single and double 1. Read the following steps carefully. Prepare a
displacement reactions. table in which to record your observations.
2. Put on your lab apron and eye protection.
• lab apron Part A: single Displacement Reactions
• eye protection 3. Clean three strips of magnesium ribbon, zinc
• large well plate metal, and copper wire with steel wool or
sandpaper until they are shiny.
• steel wool or sandpaper
4. Half-fill one well of the well plate with the
• 3 strips of magnesium ribbon
copper(II) nitrate solution.
• 3 strips of copper wire
5. Half-fi ll a second well with the zinc nitrate
• 3 small pieces of zinc solution.
• dropper bottles of
compressed dangerously 6. Half-fill a third well with the magnesium nitrate
gas reactive material
• dilute copper(II) nitrate solution solution.
flammable and
mpressed
s • dilute zinc nitrate solution
dangerously
combustible
reactive material
biohazardous
infectious material 7. Place one strip of each metal (magnesium, zinc,
material
mmable and • dilute magnesium nitrate solution
poisonous and and copper) in each of the wells (Figure 1). Use
biohazardous
mbustible
aterial
oxidizing
infectious material
infectious material
• dilute sodium carbonate solution
material
causing immediate the toothpick to keep the metals submerged and
poisonous and
and serious toxic
effects not touching each other.
dizing • 3 toothpicks
infectious material
aterial
causing immediate
and serious toxic
corrosive
poisonous and
infectious material
8. Observe the wells for several minutes. Record
The
effectssolutions used in this activity are irritants.
material causing other your observations in your table, noting the
Copper(II)
poisonous and nitrate is toxic. Avoid skin contact. Wash any
toxic effects
rrosive infectious material properties of the reaction products.
aterial spills on skin or clothing immediately with plenty of cold
causing other
toxic effects
water. Report any spills to your teacher. 9. Save the contents of the wells for Part B.

Figure 1 Each metal is placed in each of the three solutions.
Part B: Double Displacement Reactions (f) Write the chemical equations for three reactions
10. Add three drops of sodium carbonate solution to that occurred in Part B. K/U
each of the three wells from Part A. (Note: Avoid (g) Why was it necessary to clean the metal surfaces
cross-contamination of solutions. Never let the tip before putting them in the solutions? T/ I
of the dropper touch or enter another solution.)

Record your observations in your table, noting the Apply and Extend
properties of the reaction products.
(h) Table 1 shows the chemical equation for the
11. Dispose of the contents of the well plate as reaction of zinc in a solution of lead(II) nitrate.
directed by your teacher. Given this information, predict whether
12. Clean your workstation and wash your hands. magnesium will also react in a lead(II) nitrate
solution. Explain your prediction. T/I
Analyze and Evaluate (i) Water is considered to be “hard” if it contains

(a) What evidence suggests that chemical reactions high concentrations of calcium and magnesium
occurred? K/U
ions. Research and prepare a brief report
(b) Rank the three metals in Part A in order of summarizing
decreasing reactivity. (Rank the most reactive • why hard water can be a nuisance.
as #1 and the least reactive as #3.) T /I
• how the sodium carbonate solution from
(c) Rank the three solutions in Part A in order of this activity “soft ens” water.
T/I C A
decreasing reactivity. T /I
(d) What pattern do you notice when you compare
your answers to (b) and (c)? T /I
(e) Write the chemical equations for three reactions

that occurred in Part A. K/U

6.9 Types of Chemical Reactions: Combustion
In the early hours of August 2, 2008,
a north Toronto neighbourhood was
rocked by a loud explosion. Startled
residents stared out their windows in
disbelief as a giant fireball rose high into
the night sky. Why? A nearby propane
storage depot was on fire (Figure 1)!
Large chunks of metal, probably from
exploded propane storage tanks, littered
the area. Shockwaves from the explosion
shattered windows and ripped doors off
their hinges. Firefighters rushed to the
scene, but all they could do was cool the
remaining propane tanks with water and
Figure 1 Propane was the fuel in this wait for the fireball to burn itself out.
dramatic combustion reaction in north Extinguishing a propane blaze is almost impossible. People were shocked and
Toronto. angry that propane—a highly explosive fuel—had been stored and handled in
a way that led to such a damaging explosion.
What Is Combustion?
combustion the rapid reaction of a Combustion is a chemical reaction in which a fuel “burns” or reacts
substance with oxygen to produce oxides quickly with oxygen. The products of this reaction are usually an oxide and
and energy; burning
energy. Propane, C3H8, is one of a group of molecular compounds called
hydrocarbons. As their name implies, these compounds contain only the
elements hydrogen and carbon. Most hydrocarbons originate from fossil
fuels. The combustion of hydrocarbons powers cars and buses, warms homes,
generates electricity, and even lights up the candles on your birthday cake.
Complete Combustion of Hydrocarbons

The products of a hydrocarbon combustion reaction can vary. They depend
complete combustion a combustion on the availability of oxygen. If oxygen is plentiful, hydrocarbons burn
reaction of hydrocarbons that uses all the
available fuel and produces only carbon
completely to release the energy they contain. The only products of complete
dioxide, water, and energy; occurs when combustion are carbon dioxide and water. The word equation for the
the supply of oxygen is plentiful complete combustion of a hydrocarbon is
hydrocarbon + oxygen → carbon dioxide + water + energy
Carbon dioxide is an important greenhouse gas. You will learn more
DID YOU KNOW? about this product of combustion in Unit B: Climate Change.
Is Your Classroom Putting You Methane, CH4(g), is a typical hydrocarbon. Natural gas is mostly
to Sleep? composed of methane. The balanced chemical equation for the complete
Carbon dioxide is exhaled by students combustion of methane is
and produced by the school heating
system. This gas accumulates in a
CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(g) + energy (complete combustion)
classroom over the course of a day The complete combustion of hydrocarbons can be represented by the
if ventilation is inadequate. Excess general equation
carbon dioxide can cause headaches
and drowsiness. CxHy + O2 → CO2 + H2O + energy
During complete combustion, fuels burn cleanly with no sooty residue.

Incomplete Combustion of Hydrocarbons
If the oxygen supply is limited, incomplete combustion may occur, incomplete combustion a combustion
releasing carbon monoxide gas and carbon (soot), in addition to carbon reaction of hydrocarbons that may
produce carbon monoxide, carbon,
dioxide and water. An orange, fl ickering fl ame oft en indicates incomplete
carbon dioxide, soot, water, and energy;
combustion. occurs when the oxygen supply is limited
Butane gas, C4H10(g), is burned as fuel in some portable stoves. If the
stove burner is not adjusted properly, or if there is not enough oxygen,
incomplete combustion could occur.
C4H10(g) + 5 O2(g) → 2 CO2(g) + 5 H2O(g) + CO(g) + C(s) + energy
Carbon Monoxide
Carbon monoxide, CO(g), is an odourless, colourless gas that is highly toxic.
Symptoms of carbon monoxide poisoning include headache, dizziness,
nausea, and respiratory problems. These are fairly general symptoms, so
carbon monoxide may not immediately be identified as the cause. Many
people have died from inhaling carbon monoxide. It is oft en produced as
a result of the incomplete combustion of fuels in a confined space. Carbon To learn more about the effects
monoxide is typically found in a home with a poorly ventilated furnace or in of carbon monoxide on the body,
a closed garage in which a vehicle is running. Go to NElsoN sCIENCE
CiTiZen ACTION
Carbon Monoxide Detectors
Carbon monoxide in homes is particularly dangerous at night What Can You Do to Help?
because people who are asleep are totally unaware of the Contact your local fire department. Find out what they
symptoms of carbon monoxide poisoning. To prevent deaths recommend regarding carbon monoxide detectors. How many
from faulty home furnaces or stoves, we are advised to install detectors should you have in your home? Where should they
carbon monoxide detectors in our homes. These devices save be placed? Why? Consider protecting your family from carbon
lives every year. monoxide poisoning.
soot
Soot is made up of particles of carbon. Soot is evidence of incomplete
combustion, which causes pollution and wastes energy. Soot is common in
older vehicles with poorly maintained engines (Figure 2(a)). Forest fires also
produce huge quantities of soot that travel far downwind (Figure 2(b)).
other Combustion Reactions (a)

Many other substancesbesides hydrocarbonsundergo combustion
reactions. Elements, for example, react with oxygen to form oxides.
Magnesium burns to produce magnesium oxide just as carbon burns to
produce carbon dioxide.
General word equation: element + oxygen → oxide + energy
General chemical equation: A + O2 → AO + energy
Example: 2 Mg(s) + O2(g) → 2 MgO(s) + energy (b)
You might have noticed that combustion reactions involving elements are Figure 2 Two signs of incomplete
also synthesis reactions: they follow the pattern A + B → AB. combustion are (a) soot production and
(b) orange flames.
NEL 6.9 Types of Chemical Reactions: Combustion 249
Combustion of Hydrogen
Hydrogen reacts (burns) with oxygen to form water:
2 H2(g) + O2(g) → 2 H2O(g) + energy
Hydrogen is already being used as a fuel in a few technologies. The source of
hydrogen is usually water. The decomposition reaction that produces hydrogen
DID YOU KNOW? from water is the exact reverse of the hydrogen combustion reaction:
Iceland: A Hydrogen Powerhouse
2 H2O(g) + energy → 2 H2(g) + O2(g)
Iceland has ambitious plans. It intends
to be the first country to completely The energy on the reactant side of this equation usually comes from
switch from fossil fuels to hydrogen. electricity.
Iceland was formed from volcanoes, so At first glance, hydrogen is an ideal fuel because
it has abundant stores of geothermal
energy. Icelandic scientists plan to • it burns cleanly, producing only water and energy, and
use this energy to extract hydrogen • there is an almost endless supply of water to produce hydrogen. As long as
from seawater.
you have energy to decompose the water, you have a source of hydrogen.
However, some technical problems have to be overcome before hydrogen
becomes a common vehicle fuel.
DID YOU KNOW?
• Making hydrogen requires energy. What non-polluting source of energy
Phosphorus from Urine
can be used?
Like many alchemists of his time,
Hennig Brandt was preoccupied • The engines for hydrogen-fuelled cars are currently very expensive to make.
with trying to turn objects into gold. • Hydrogen is an explosive gas. It is difficult to transport and store.
In 1669, Brandt chose urine as his
starting material because it is gold
coloured. Brandt boiled urine until it Combustion of Phosphorus
became a thick paste. He continued The combustion of phosphorus has particularly interesting applications.
heating this paste, collecting and
Phosphorus comes in two forms: white and red phosphorus (Figure 3(a)).
condensing the vapours produced.
Much to his disappointment, instead
You might have seen red phosphorus on the striking strip of a package of
of gold, he had produced a white solid safety matches (Figure 3(b)).
that glowed in the dark. Brandt named
this substance “phosphorus,” which
means “light-giving” in Greek.
Figure 3 (a) White phosphorus is so

reactive that it has to be stored in oil
to prevent it from coming into contact
with the air. Red phosphorus is relatively
unreactive. (b) Safety matches will ignite
only if they are scraped against the red (a) (b)
phosphorus on the match box.
When you rub a match against the striking strip, the friction releases heat
energy. This energy converts red phosphorus into white phosphorus, which
instantly burns in the air:
P4(s) + 5 O2(g) → P4O10(g) + energy
The heat from this reaction ignites the chemicals in the head of the match.
The combustion of non-metals is an important first step in the formation
of acid precipitation. You will learn more about these reactions in Chapter 7.

RESEARCH THIS FiReFigHTing WiTH an MSdS
SKILLS: Researching, Identifying Alternatives, Defending a Decision, Communicating SKILLS HANDBOOK
4.A.
How you put out a fire depends on the properties of the fuel. An 2. Determine the best method of putting out a fire involving
MSDS can provide firefighters with valuable tips on how to put out each of these substances.
a fire, particularly with chemical fires. A. Create a poster or other information campaign to share your
1. Research the MSDS for the following substances: propane, discoveries with others. Explain, in your campaign, why the
olive oil, and magnesium. specific methods are effective. T/I C A
in SUMMARY
• Hydrocarbons oft en react with oxygen in • Some metals react with oxygen in combustion
combustion reactions. Complete combustion reactions, producing oxides of the metal (e.g.,
produces only carbon dioxide and water; magnesium oxide, MgO).
incomplete combustion may produce carbon • Hydrogen reacts with oxygen in combustion
(soot), carbon monoxide, carbon dioxide, and reactions, producing water. This is a possible
water. future source of energy for vehicles.
CHECK YOUR LeaRning

1. (a) Describe an idea in this section that could affect
your life.
(b) Why is this idea important? K /U A
2. Complete these skeleton equations. Remember to balance

the equations, where necessary, by adding coefficients
before the chemical symbols. K /U T /I
(a) ___________ (s) + ___________ (g) →
SO2(g) + energy
(b) __ Ca(s) + __ ______ → __ CaO(s) + energy
(c) __ C3H8(g) + __ O2(g) →
__ _________ + __ _________ + energy
(d) __ C2H4(g) + __ O2(g) → Figure 4 Propane is highly flammable. Note the warnings on
__ _________ + __ _________ + energy the container.
3. Propane is used as a fuel in camping stoves (Figure 4). 4. Explain why you can save money on home heating fuel if
It is a hydrocarbon with the chemical formula C3H8. you keep your gas furnace clean and operating at peak
Propane is a gas at room temperature and pressure but efficiency. A
becomes a liquid when compressed. K /U T/I A 5. (a) Give at least two reasons why the use of hydrogen fuel
(a) Write the general equation for the complete combustion is potentially better for the environment than gasoline.
of a hydrocarbon. (b) What is meant by the statement “hydrogen is only as
(b) Write the balanced chemical equation for the complete environmentally clean as the energy used to
combustion of propane. make it”? K/U A
(c) Examine the Hazardous Household Products Symbols 6. List the five types of reactions that have been discussed in
(HHPS) on the label. Outline the precautions you should this chapter so far. K/U
take when using this product. 7. (a) Use specific examples to show that some combustion
(d) Why is it unwise to use a camping stove inside a tent? reactions are also synthesis reactions.
(b) Under what conditions does this occur? A
NEL 6.9 Types of Chemical Reactions: Combustion 251

6.10 Corrosion
With just a few exceptions, such as gold and platinum, most metal elements
corrosion the breakdown of a metal corrode. Corrosion is the breakdown of a metal as a result of chemical
resulting from reactions with chemicals reactions with its environment. Metalworkers have, over the centuries, given
in its environment
different names to corrosion reactions involving different metals. Silver, for
example, tarnishes when it comes in contact with sulfur compounds in air.
Beneficial Corrosion
In some cases, the corrosion of a metal is beneficial. For example, when
aluminum is exposed to air, it quickly corrodes to form aluminum
oxide—one of the hardest substances known. Aluminum oxide tightly coats
the underlying aluminum metal, preventing any further corrosion from
occurring. Th is explains why aluminum camping pans can be safely left
outside in the rain, while a cast iron pan rusts in a matter of days. Zinc and
copper are other common metals that form protective coatings when they
corrode. Copper develops an attractive greenish patina aft er being exposed
to the atmosphere for several months (Figure 1). This patina is so corrosion
resistant that a copper roof remains weatherproof for up to 75 years.
Figure 1 A colorful patina develops on

copper roofs over several years
Rust
LeaRning Tip Rust is the familiar reddish-brown fl aky material produced when metals
Corrosion and Rusting containing iron corrode. Unlike the corrosion products of aluminum and
The terms corrosion and rusting are copper, rust does not stick well to the underlying steel. Instead, rust is very
often used interchangeably. Strictly porous and readily fl akes away from the surface of steel. As it does, fresh
speaking, corrosion is a general term
steel is exposed for further corrosion. This process continues until the steel is
that can be applied to any metal
that reacts with chemicals in the
completely corroded or “eaten away.” All that remains is a trail of rust fl akes!
environment. Rusting, however, refers
specifically to the corrosion of metals Causes of Rust
that contain iron, such as steel. The corrosion of iron or rusting is a complex process that is affected by
many things: the presence of air, water, and electrolytes, along with acidity
and mechanical stress.
oXyGEN AND WAtER
The most obvious factors necessary for the corrosion of iron are oxygen (in
air) and water. Steel will not corrode if it is kept away from water and oxygen.
This is why steel lasts much longer in dry climates than in Ontario.
ElECtRolytEs
Contrary to popular belief, salt (sodium chloride) does not actually cause LeaRning Tip
corrosion of iron. It does, however, speed up corrosion once it starts. This Electrolytes
is because salt is an electrolyte that helps the rusting process along. The In Chapter 5, you learned that
combination of road salt and saltwater spray off the ocean affects both the electrolytes are compounds that, when
dissolved in water, conduct electricity.
bodies of cars and the metal supports of bridges.
Preventing Corrosion
Several strategies are used to prevent corrosion in various situations. Some DID YOU KNOW?
are more effective than others, but none are perfect. These strategies can be The Eiffel Tower
divided into three categories: using corrosion-resistant materials, protective The world-famous icon of France is an
coatings, and galvanizing. iron tower. Preventing the Eiffel Tower
from rusting requires the application
of 50 to 60 tonnes of paint every
Protective Coatings seven years.
A simple way to prevent corrosion is to cover the metal with a rust-inhibiting
paint, chrome, or plastic coating. This strategy works well on above-ground
structures provided that the metal remains completely covered. However, once
the coating is chipped or scratched, corrosion is inevitable (Figure 2).
Figure 2 This bridge, spanning Halifax

Harbour, is exposed to all the factors
that speed up corrosion. It requires
constant care to keep it corrosion-free.
Corrosion-Resistant Materials
A straightforward way of preventing corrosion is to use materials that do not
rust. For example, decades ago, car bumpers were made out of steel, which
tended to rust if they became dented or scratched. Today, most bumpers are
made of plastic. Plastic does not corrode and is lighter than steel. This helps
reduce the overall weight of the car and improve fuel efficiency.
If steel is the only appropriate material for a specific object, improving its
corrosion resistance will be an advantage. For example, the steel used by the
auto industry today has more corrosion-resistant additives than ever before.
New cars and bridges remain rust-free longer, even in Ontario’s challenging
winter conditions.
Many other corrosion-resistant alloys have been developed as well. An alloy
is a metal produced by blending metals (and sometimes non-metals) in specific
proportions. For example, most cutlery is made from stainless steel, an alloy of
various elements, including iron, carbon, nickel, and chromium. Surgical-grade
Figure 3 This surgical implant is made
stainless steel, which is used to make medical tools and implants, contains enough of stainless steel, an alloy designed to
chromium to make the steel corrosion-proof almost indefinitely (Figure 3). resist corrosion inside the body.
NEL 6.10 Corrosion 253

Galvanizing
galvanized steel steel that has been Galvanized steel is steel that has been coated with a thin layer of zinc.
coated with a protective layer of zinc, Galvanizing protects steel because zinc corrodes before the iron in the steel
which forms a hard, insoluble oxide
does. As zinc corrodes, it forms a protective oxide layer that sticks to both
Reading Tip
the zinc layer and any steel that may be exposed. The corrosion protection
remains intact even if there are nicks or scratches in the zinc layer. That is why
Making Inferences
Think about what you already know to galvanizing steel provides better rust protection than painting it (Figure 4).
help you make inferences. For example,
you might recall seeing rusted nails in
an old wooden fence. You might also
have seen a galvanized chain-link fence
that has not rusted. Consequently,
you infer that galvanized metal resists
corrosion better than non-galvanized
metal.
Figure 4 Galvanized steel is corrosion

resistant and requires no maintenance.
in SUMMARY
• Corrosion is the breakdown of a metal as it reacts • Rusting occurs in the presence of oxygen and
with chemicals in the environment. water and is made worse by electrolytes such
• Corrosion of some metals forms a tough as salt.
protective layer that prevents further corrosion. • Corrosion can be slowed or avoided by using
• Rusting is the corrosion of iron and steel. Rust corrosion-resistant materials, covering the metal
does not form a protective layer but continues with a protective layer (for example, paint), or
fl aking away until the metal is severely damaged. galvanizing with zinc.
CHECK YOUR LeaRning TReaTMenT

1. (a) Before reading about it in this section, what did you think 4. Consider an experiment in which an aluminum soft drink can
rust was? and a steel soup can are left outside for a few days. Use your
(b) Describe similarities and differences between what you knowledge of the corrosion of steel and aluminum to predict
already knew about rust and what you learned about it as how they would look different after a week exposed to rainy
you read this section. K/U T/I weather. Explain your prediction. K/U T/I
2. (a) In your own words, define “corrosion.” 5. Why is it important for a car to be clean and dry before being
treated with a rust-proofing product? A
(b) Describe the difference between corrosion and rusting. K/U
6. A car design company predicts that the bodies of automobiles
3. (a) What two substances react to form rust?
will last much longer in the islands of the Caribbean than in
(b) What other factors help rust form quickly? K/U
Canada. Explain this prediction. K/U A
7. Why is galvanized steel preferred for outdoor
uses? K/U T/A A

SCIENCE OSSLT
Poisonous Jewellery
Does your jewellery stain your skin? Do you wear 18-karat yellow so you Want to Pierce your . . .
gold with no ill effects but break out in a rash if you wear white The number of nickel allergies has recently increased dramatically
gold? The culprit in both situations may be nickel, the shiny, silvery because of the popularity of body piercing. The reason is obvious:
metal that is a part of so many common metallic objects: earrings, a nickel-containing object is in constant contact with the body.
coins, zippers, cellphones (Figure 1). For some people, prolonged Piercing any body part results in some bleeding. Blood contains
skin contact with a nickel-containing object (like that stud through electrolytes, which can corrode nickel in the studs or hoops,
your eyebrow) is like rubbing your skin in poison ivy, except the releasing nickel ions. The ions can easily enter the body through
effects are less immediate. In both cases, a chemical is transferred the new wound. Soft tissue, like that in the earlobes, heals quickly
to your skin, sensitizing the skin to the chemical and potentially because it does not have a lot of blood flow.
triggering an allergic response known as allergic contact dermatitis.
Each year, hundreds of Canadians become sensitized to nickel, tongue Piercing
meaning that even brief exposure to nickel can trigger an allergic Getting your tongue pierced is far riskier than getting your ears
response. And once you are sensitized, there is no cure! pierced (Figure 2). A tongue is much thicker and contains more
blood vessels than an ear lobe. Consequently, a newly pierced
tongue takes much longer to heal than a newly pierced ear lobe.
It is also more prone to infection than most other body parts. An
infected tongue can swell large enough to block the airway to
the throat. Some deaths have resulted from complications due
to tongue piercing. Even without complications, a newly pierced
tongue can take from four to six weeks to heal. During the normal
healing period, a stud through the tongue is bathed with enough
blood and saliva to trigger a nickel allergy.
Figure 1 If you have your ears pierced, give some thought to what
kind of studs or hoops you want inserted.
The real cause of nickel allergies is nickel(II) ions, Ni2+(aq).

These ions are produced when nickel metal is corroded by the
acidity of body fluids, such as sweat. The reaction involved is
Ni(s) + 2 H+(aq) → Ni2+(aq) + H2(g)
Nickel Allergy: Contributing Factors

Three factors contribute to a nickel allergy: prolonged, direct skin
contact; the presence of electrolytes, which occur in sweat; and Figure 2 Tongue piercings are more likely than other types of
the type of nickel-containing metal involved. piercings to result in infection or nickel allergy.
The type and composition of a metal often determine how
quickly it corrodes. Stainless steel is an alloy of iron, nickel, and Making an Informed Decision
chromium. The resistance of stainless steel to corrosion varies If you are considering a body piercing, carefully weigh the risks
depending on how much chromium it contains. The stainless steel involved. Consult only with the most reputable business or health
used for dental braces and surgical implants does not corrode at care professional. Insist that sterile procedures and high-grade
all, unlike the steel in inexpensive jewellery. surgical stainless steel be used.
NEL 255
CHAPTER
looKING BACK
6
Chemical reactions involve Chemical reactions obey the Chemical reactions involving
the change of one or more law of conservation of mass consumer products can be
substances into one or more and can be represented by useful or harmful.
different substances. balanced chemical equations.
• The usefulness of many consumer
• Reactants are substances present • The law of conservation of mass products depends on the chemical
at the beginning of a reaction; states that in any given chemical reactions of their ingredients.
products are substances present reaction, the total mass of (6.4–6.9)
at the end of the reaction. (6.1) reactants equals the total mass • Not all chemical reactions involving
• Reactions can involve energy as of products. (6.3) consumer products are beneficial.
an input or as an output. (6.1) • A balanced chemical equation Some are dangerous to people and
• Different reactions occur at different describes the reactants and to the environment. (6.4–6.10)
rates: combustion reactions are products involved in the reaction, • Reactive consumer products should
generally fast, while corrosion their ratios, and their states. (6.4) be stored, used, and handled with
reactions are much slower. • Balanced chemical equations care. (6.4–6.9)
(6.1–6.9) obey the law of conservation of
mass. (6.3, 6.4)
We can use patterns in Corrosion is the reaction of Chemical reactions affect us

chemical properties to metals with substances in the and our environment.
classify chemical reactions. environment.
• Some combustion reactions form
• Synthesis reactions can be • Most metals corrode. (6.10) products that are damaging to the
represented by A + B → AB. (6.5) • Some metals, such as aluminum, environment and human health. (6.9)
• Decomposition reactions can be form hard, protective coatings when • The complete combustion of
represented by AB → A + B. (6.5) they corrode. (6.10) hydrocarbons releases carbon
• Single displacement reactions can be • Rust is produced when iron or steel dioxide—a greenhouse gas. (6.9)
represented by A + BC → AC + B. (6.6) corrode. (6.10) • The incomplete combustion of
• Double displacement reactions can be • Rusting can be prevented by using hydrocarbons releases soot and
represented by AB + CD → AD + CB. (6.6) corrosion-resistant materials, carbon monoxide. (6.9)
• Combustion reactions of elements applying protective coatings, or • Corrosion can weaken iron and
can be represented by A + O2 → AO + galvanizing. (6.10) steel, resulting in damage to cars
energy; complete combustion of and structures. (6.10)
hydrocarbons can be represented by
CxHy + O2 → CO2 + H2O + energy. (6.9)
• Some reactions fit into more than one
class. (6.8, 6.10)

THINK NOW? chemical reaction (p. 225)
word equation (p. 225)
you thought about the following statements at the beginning of chemical equation (p. 225)
the chapter. you may have encountered these ideas in school, reactant (p. 225)
at home, or in the world around you. Consider them again and product (p. 225)
decide whether you agree or disagree with each one. state symbol (p. 226)
law of conservation of mass
(p. 230)
synthesis reaction (p. 237)
decomposition reaction
(p. 238)
single displacement reaction
(p. 240)
double replacement reaction
(p. 242)
precipitate (p. 242)
1 Chemical reactions are bad for the
environment.
4 Carbon dioxide in your classroom
makes you sleepy.
combustion (p. 248)
complete combustion (p. 248)
incomplete combustion
(p. 249)
corrosion (p. 252)
galvanized steel (p. 254)
2 Chemical reactions are reversible.

Agree/disagree?
5 Some people are allergic to
cellphones.
Agree/disagree?
BiG ideas
The total mass of substances Hydrogen will replace gasoline as the
3 involved in a chemical change
6 fuel of the twenty-first century.
ways.
remains constant. Agree/disagree?
Agree/disagree? ✓ Chemical reactions may
challenges.
How have your answers changed since then?
CHAPTER
REVIEW
6
What Do you Remember? 6. People can choose to have the underside of their
vehicle sprayed with oil once a year. How does a
1. Zinc oxide, ZnO, is an active ingredient in some
coating of oil help prevent rusting? (6.10) K/U A
sunscreens. Zinc oxide can be made by heating

zinc sulfide strongly in air: 7. Balance and classify each of the following
2 ZnS(s) + 3 O2(g) → 2 ZnO(s) + 2 SO2(g) chemical equations. (Note that some may fit into
more than one category.) (6.3–6.9) K/U T/I
Referring to this chemical equation, write
(a) K2O → K + O2
(a) the coefficient for zinc sulfide
(b) Na + I2 → NaI
(b) the number of sulfur atoms in sulfur dioxide
(c) Cu(NO3)2 + NaOH → Cu(OH)2 + NaNO3
(c) the coefficient for oxygen (the element)
(d) KClO3 → KCl + O2
(d) the number of different reactants
(e) Ca(NO3)2 + HBr → CaBr2 + HNO3
(e) the total number of reactant molecules
(f) Sn(OH)2 → SnO + H2O
(f) the states of matter present in this reaction
(g) P4 + N2O → P4O6 + N2
(6.1)K/U
(h) Fe + Al2(SO4)3 → FeSO4 + Al

2. The combustion of hydrocarbons sometimes (i) AlCl3 + Na2CO3 → Al2(CO3)3 + NaCl
produces a yellow fl ame and a sooty residue. (6.9) K/U
(j) C3H6 + O2 → CO2 + H2O
(a) Describe the conditions when this might occur.
8. Explain why you should not cook on a barbecue
(b) Name this type of combustion.
in an enclosed space. (6.9) T/I A
What Do you Understand? 9. The following chemical reactions take place, one
3. Consider the six types of reactions discussed aft er another, when an automobile airbag infl ates.
in this chapter. All involve elements and Balance and classify each reaction. (6.3–6.6) K/U
compounds. Identify the type(s) of reaction that (a) Th

e gas needed to infl ate the bag comes from
has the following reactants: the reaction of sodium azide, NaN3.
(a) two elements (d) only one NaN3(s) → N2(g) + Na(s)
(b) two compounds compound (b) The sodium produced in reaction (a) is
(c) oxygen and (e) an element and a dangerous. It is removed by a reaction with
a fuel compound (6.5–6.10) K/U
iron(III) oxide, Fe2O3, in the airbag.
4. Use the law of conservation of mass to explain Na(s) + Fe2O3(s) → Na2O(s) + Fe(s)
why chemical equations should be balanced. (c) The sodium oxide quickly reacts with carbon
(6.2, 6.3) K/U
dioxide and moisture from the air to form
5. Hydrogen peroxide is a clear, colourless liquid sodium hydrogen carbonate.
used to disinfect cuts. The chemical equation for Na2O(s) + CO2(g) + H2O(g) → NaHCO3(s)
the decomposition of hydrogen peroxide is
solve a Problem
2 H2O2(aq) → 2 H2O(l) + O2(g) (6.1, 6.3) K/U T/I
(a) Explain the difference between the state 10. Fuels burn faster as the concentration of oxygen
symbols (aq) and (l). is increased. For example, iron wool burns in
(b) Predict what you would expect to see in a pure oxygen to produce iron(III) oxide and a
test tube of hydrogen peroxide undergoing great deal of energy. (6.1, 6.3, 6.9) K/U T/I
this reaction. (a) Write the word and chemical equations for
(c) Describe how to tell when the reaction is this reaction.
complete. (b) Design an experiment using this reaction to
(d) Predict how the mass might change as the confirm the law of conservation of mass.
reaction proceeds. Explain.
11. A student placed a piece of zinc metal in a 14. (a) Develop a visual organizer, such as a chart or
solution of hydrochloric acid. The chemical a consequence map, to show the risks and
equation for the reaction that occurred is benefits of burning fossil fuels.
Zn(s) + 2 HCl(aq) → H2(g) + ZnCl2(aq) (b) Write two paragraphs, each written from
a different perspective, outlining why we
The following data were collected from the should (or should not) continue to burn
experiment: fossil fuels for energy. (6.9) A
initial mass of zinc reacted: 2.5 g

initial mass of hydrochloric acid: 52.6 g Reflect on your learning
fi nal mass of solution: 54.8 g 15. (a) How relevant was the idea of a chemical
(6.3, 6.5)
T/I
reaction to you before reading this chapter?
(a) Calculate the mass of hydrogen produced. (b) Outline how your understanding of the role of
(b) Do the results of this experiment violate the chemical reactions in your life has changed.
law of conservation of mass? Explain.
12. Two properties that make gasoline potentially Web Connections
dangerous are that it evaporates quickly at room 16. What is the “fire triangle”? How does it relate to
temperature and that its vapour ignites readily. the work of firefighters? (6.10) K/U A
Despite these hazards, many homeowners keep

a small amount of gasoline on hand to fuel small 17. The “carbonyl process” is a method of refining
devices like lawn mowers and snowblowers. nickel that involves passing carbon monoxide
What must be considered when handling or gas over impure nickel at high temperature. This
storing gasoline? Explain your answer. (6.9) A
produces a compound called nickel carbonyl:
Ni(s) + CO(g) → Ni(CO)4(g)
Create and Evaluate
Nickel carbonyl is then strongly heated to
13. A routine test of the drinking water at Edgevale produce pure nickel and carbon monoxide gas:
High School revealed slightly higher than normal Ni(CO)4(g) → Ni(s) + CO(g) (6.5) K/U T/A
concentrations of lead. Exposure to lead is

known to slow brain development, particularly in (a) Classify each of these reactions.
children. The lead was coming from the corrosion (b) Research the properties of nickel carbonyl and
of the solder metal used to join lengths of copper carbon monoxide. Why must the reactions be
pipe together. Edgevale school officials were faced conducted in an airtight chamber?
with a difficult decision. Closing the school was 18. Dinitrogen monoxide is also known as nitrous
not an option. The copper pipes could not be oxide, N2O(g). Dentists sometimes use this gas to
replaced until the following summer. However, relax their patients. Nitrous oxide can be made
staff and students needed a safe supply of drinking from solid ammonium nitrate. Water is also
water now. Two options being considered were produced in this reaction. (6.3, 6.5, 6.9) K/U C A
• providing bottled water for all 1500 staff (a) Write the chemical equation for this reaction.
and students or (b) Classify this reaction.
• turning on all drinking fountains for at (c) Research how nitrous oxide can be used to
least 20 minutes each morning before improve the performance of racing cars.
students arrive. (Aft er 20 minutes, the lead Summarize your findings in a short web
concentrations decreased to within the article for car enthusiasts. Include safety advice
“normal” range.) (6.10) A regarding the use of nitrous oxide in car engines.
(a) List the risks and benefits of both options.
(b) If you were the school principal, which
option would you choose? Why?

CHAPTER
sElF-QUIZ
6
For each question, select the best answer from the four Indicate whether each of the statements is TRUE or FALSE.
alternatives. If you think the statement is false, rewrite it to make it true.
1. Which of the following equations is balanced? 5. In a balanced chemical equation, each side of the
(6.4) K/U
equation has the same number of atoms of each
(a) H2 + O2 → 2 H2O element. (6.3) K/U
(b) Zn + 2 AgNO3 → Zn(NO3)2 + 2 Ag 6. Equations are balanced by changing the subscripts

(c) N2 + H2 → NH3 in the chemical formula of a substance. (6.3) K/U
(d) PbCl2 + Li2SO4 → LiCl + 2 PbSO4

2. Which of the following is a double displacement Copy each of the following statements into your notebook. Fill
reaction? (6.6) K/U
(a) 2 PbO2 → 2 PbO + O2 the sentence.
(b) 2 Al + Fe2O3 → 2 Fe + Al2O3 7. A ______ is a whole number that appears in
(c) N2 + 3 H2 → 2 NH3 front of a chemical formula in an equation.
(d) ZnBr2 + 2 AgNO3 → Zn(NO3)2 + 2 AgBr (6.3) K/U
3. The decomposition of calcium carbonate is given

8. In an experiment combining aluminum with
by the equation:
oxygen to form aluminum oxide, the aluminum
CaCO3(s) → CaO(s) + CO2(g) oxide is the ______ formed from the reactants.
(6.1) K/U
If 25 g of CaCO3 is heated to give 15g of CaO,

what mass of CO2 is also produced? (6.3) K/U
Match the general pattern on the left with the appropriate

(a) 5 g
type of chemical reaction on the right.
(b) 10 g
9. (a) A + B → AB (i) decomposition
(c) 15 g
(d) 25 g (b) A + BC → AC + B (ii) double
displacement
4. Carbon disulfide is produced by the reaction of (c) AB + CD → AD + CB (iii) single
carbon with sulfur dioxide. Carbon monoxide displacement
is also formed. What is the balanced chemical (d) AB → A + B (iv) synthesis
equation for this reaction? (6.4) K/U
(e) A + O2 → AO + energy (v) combustion
(a) C + SO2 → CS2 + CO (6.5, 6.6, 6.9) K/U
(b) 5 C + 2 SO2 → CS2 + 4 CO

(c) 4 C + SO → CS2 + 3 CO Write a short answer to each of these questions.
(d) C + SO → CS + CO
10. Consider the following chemical reaction:
CaO(s) + H2O(l) → Ca(OH)2(s) + energy
(6.1, 6.6) K/U T/I
(a) What are the reactants in this reaction? How

do you know?
(b) What substance is produced in this reaction?
(c) Why is the final reaction mixture a cloudy
liquid?
(d) Will the test tube in which this reaction is
occurring become warmer or cooler during
the reaction? Explain.
11. When baking soda (sodium hydrogen carbonate, 19. The Eiffel Tower is an iron monument located in
NaHCO3(s)) is heated, it decomposes to form Paris, over 150 km from the ocean. Predict how
sodium carbonate, Na2CO3(s), carbon dioxide, the rate of corrosion would change if the Eiffel
and water. (6.1, 6.4) K/U C
Tower were located in a seaside town. (6.10) T/I
(a) Write the word equation for this reaction. 20. Your family is planning to grill hamburgers in the
(b) What evidence suggests that a chemical backyard, but it starts to rain. Someone suggests
change is taking place? grilling in the garage instead. Explain why it
(c) Write a balanced chemical equation for this would be risky to grill in the garage. (6.9) C
reaction.
21. Give an example of how one chemical reaction
12. The following unbalanced equation represents
can be beneficial in some applications and
the formation of magnesium oxide from
harmful in others. (6.1–6.10) A
magnesium and oxygen.
Mg + O2 → MgO
Can this equation be balanced by changing the
formula of the product to MgO2? Explain.
(6.3, 6.4) K/U
13. List three pieces of information that can be

obtained from a balanced chemical equation.
(6.4) K/U
14. Compare corrosion and rusting, using specific

examples. (6.10) K/U C
15. A synthesis reaction is defined as “a reaction in

which two reactants combine to make a larger or
more complex product.” (6.5) C
(a) Write a definition of “synthesis reaction” in

your own words.
(b) Draw a diagram representing a typical
synthesis reaction.
16. Describe one way you could protect a bicycle
from corrosion. (6.10) T/I
17. (a) How does the name “hydrocarbon” give clues

about the composition of hydrocarbons?
(b) Give the names and formulas of three
hydrocarbons. (6.9) A
18. (a) Briefly describe five chemical reactions that

you may encounter in a typical day.
(b) Choose one of the reactions and identify the
names of the products and reactants.
(6.1–6.10) A

CHAPTER
7 Acids and Bases
KEY QUESTION: How do acids and bases affect

our lives and the environment?
Sudbury has experienced the effects of acids on its environment,

and is now recovering from those effects.
262 Chapter 7 • Acids and Bases NEL

UNIT C
Chemical
Reactions

KEY CONCEPTS
Acids are aqueous Bases are aqueous Acids and bases have a
solutions that have solutions that have significant impact—both
characteristic properties. characteristic properties. good and bad—on society
and the environment.
The acidity of solutions is Acids and bases react Industrial and vehicle
measured using the pH together in neutralization emissions that cause
scale. reactions. acid precipitation can be
reduced by technology.

ENGAGE IN
SCIENCE
Before the clean-up
Mario Ricci has lived and worked in Sudbury almost all

his life. As our reporter invites him to look back over his After the smokes
tacks and scrubb
ers
70 years, his answers reveal the changes that he has
witnessed in the community.
Reporter: How old were you when you left school and
Reporter: When did things start to change?
started work?
MR: When they put up the Superstack in 1972. It’s the
MR: I left after Grade 8—most of us did—and went to
second highest smokestack in the world, you know! And
work at the nickel mine.
they installed scrubbers in the chimneys, too, to take
Reporter: What was it like in Sudbury at that time? some of the chemicals out of the smoke.
MR: It was much smaller, but growing fast. The nickel Reporter: How did that make a difference?
mines and smelter brought people in from all over.
MR: It seems that less poisonous stuff fell on the ground.
My parents came here for the work when I was about
It took a while, but after a few years things started to
six. I remember it was pretty dirty. Most of the trees
grow again. People also planted millions of trees, but
were dead. There wasn’t much grass. My parents were
some people in other towns complained that the smoke
disappointed that they couldn’t grow vegetables like they
just blew over to their area.
could back home in Italy.
Reporter: What do you think of the Sudbury area now?
Reporter: What was causing that?
MR: Parts of it are beautiful now. There are trees and grass
MR: The stuff that came out of the factory chimneys.
in the summer. It’s much nicer to walk around and sit
When you smelt nickel, you have to heat it up and add
outside.
some chemicals. Some of the chemicals come out of the
chimneys with the smoke. Then they fall on the ground
How have acids affected the environment where
and make it so that nothing can grow. There was also a
you live? Has it been a positive or a negative
lot of copper and nickel in the soil. Some of the streams
change? Where did the chemicals come from?
were bright orange, with the metal in them. And a lot of
Was their source anthropogenic or natural?
people had bad coughs and bronchitis from the pollution.
WHAT DO YOU
THINK?
1 Stomach acid can dissolve metals like the coin in

this child’s stomach.
4 We all contribute to the production of acid precipitation.
Agree/disagree?
Agree/disagree?
2 Even diet soft drinks can cause tooth decay.

Agree/disagree?
5 Medications for heartburn work by cooling the stomach.
Agree/disagree?
acids are dangerous.
6 Soft drinks can be used to make spilled drain
cleaner safer.
Agree/disagree?

FOCUS ON
WRITING
Writing a Science Report
When you write a science report, you use a standard format with
WriTing Tip
organizational headings to explain the purpose, procedure, and findings
As you work through the chapter, of your investigation. Use the strategies listed next to the report to
improve your report-writing skills.
Properties of Ionic and Molecular Compounds

Question
State your purpose, question, Are the following substances molecular or ionic compounds: lauric acid, C12H24O2; sodium
and hypothesis concisely. hydrogen carbonate, NaHCO3; glucose, C6H12O6; potassium chloride, KCl ?
Lauric acid and glucose are molecular compounds because they only have non-metallic elements
in them. Potassium chloride is an ionic compound because it contains a metal and a non-metal.
Sodium hydrogen carbonate is also ionic because it contains the hydrogen carbonate ion.
Experimental Design
Each substance will be mixed with water to see if it dissolves. Each solutions will be tested for
Briefly describe the investigation.
conductivity. The melting point of each substance will be researched.
eye protection conductivity tester well plate
Outline what is required to
conduct the investigation. apron lauric acid, C12H24O2 glucose, C6H12O6
4 small test tubes & stoppers sodium hydrogen carbonate, potassium chloride, KCl
test tube rack NaHCO3 water
Procedure
Use a numbered list of
1. Eye protection and an apron were obtained.
directions to describe each 2. A small amount of each solid was placed in its own test tube.
step of the procedure. 3. Each test tube will filled about half full with water, stoppered, and inverted to mix.
4. Observations were recorded for how well the solids dissolved.
5. A small amount of each liquid was poured into its own well in the well plate.
6. The conductivity tester was dipped into each liquid .
Write in the third person
using an objective tone. 7. Observations were recorded for whether each liquid conducts electricity.
8. The melting point of each solid was researched in a reference book. Present all observations,
Observations whether they support your
prediction or not.
Substance Dissolves in water? Conductive Melting point (oC)
Evaluate the extent to
which your evidence lauric acid no no 45
supports your hypothesis.
Analyze and Evaluate Revise your drafts to improve

organization and completeness.
(a) Sodium hydrogen carbonate and potassium chloride are the only ionic
compounds because they conducted electricity when dissolved in water.
PERFORM AN ACTIVITY
7.1
Classifying Acids and Bases SKILLS MENU
Acids and bases are two important classes of chemicals that Hypothesizing Observing
play an important role in many consumer products and Planning Evaluating
environmental problems. In this activity, you will plan and Controlling Variables Communicating
conduct five tests on two typical acids (hydrochloric acid
and acetic acid) and two typical bases (sodium hydroxide
and calcium hydroxide). This will help you to recognize
some typical properties of acids and bases.
SKILLS HANDBOOK
Purpose Procedure 1.B., 2.B.

To observe the typical properties of acids and bases Part A: Known Acids and Bases
1. Write a detailed, step-by-step Procedure for each
Equipment and Materials of the following tests:
• eye protection (i) electrical conductivity
• lab apron (ii) reaction with magnesium
• well plate (iii) reaction with sodium hydrogen carbonate
• tweezers (iv) colour with bromothymol blue indicator
• conductivity tester (v) effect on red and blue litmus paper
• magnesium ribbon (0.5 cm)
You will test hydrochloric acid, acetic acid,
• toothpick
sodium hydroxide, and calcium hydroxide. Use
• sodium hydrogen carbonate (baking soda),
the Equipment and Materials list to help you.
NaHCO3(s)
Include safety precautions as necessary. All tests
• red litmus paper
should be done in the well plate.
• blue litmus paper
• dropper bottles of 2. Prepare a table for your observations.
• distilled water 3. With your teacher’s approval, proceed with the
• bromothymol blue indicator tests. Record your observations as you go along.
• compressed
dilute hydrochloric
dangerously
acid, HCl(aq)
• gas
dilute acetic acid,
reactiveHC H O (aq)
material
2 3 2
Part B: Unknown Acids and Bases
• flammable
diluteandsodium hydroxide
biohazardous
solution, 4. Your teacher will provide you with several
combustible
NaOH(aq)
material
infectious material
unknown solutions.
• dilute calcium hydroxide
infectious material solution,
poisonous and
5. Select two chemical tests that you think are
oxidizing
Ca(OH)2(aq) causing
material
immediate
and serious toxic best for distinguishing between acids and bases.
• unknown acids and bases
effects
Plan and use these tests to classify each of the
poisonous and
The
materialacids and bases
corrosive
used in this investigation are
infectious material
causing other
unknown solutions as an acid or a base. Record
corrosive. Sodium hydroxide, if splashed in the
toxic effects your observations.
eyes, can cause blindness. Wash any spills on the 6. Dispose of all substances as directed.
skin, in the eyes, or on clothing with cold water
immediately. Report any spills to your teacher. Analyze and Evaluate
(a) Summarize the properties of acids and bases. K/ U
(b) Classify your unknowns (in Part B) as acids or

bases. Explain your classification. T/I

7.2 Properties, Names, and Formulas
Young children like to explore objects by putting things in their mouths.
Occasionally, to the horror of their parents, the interesting object gets
swallowed! Coins are the most common foreign objects swallowed by young
children (Figure 1). Once in the stomach, a coin is bathed in a corrosive
mixture that includes hydrochloric acid, HCl(aq), and other digestive juices.
The concentration of hydrochloric acid in your stomach is about the same
as the hydrochloric acid used in Activity 7.1. What do you think happens to
the coin?
Figure 1 The bright white disc in the
centre of this X-ray image is a penny in Properties of Acids
a young child’s stomach. Chemists often classify substances by their properties. This is also the case
acid an aqueous solution that conducts with acids. Acids are substances that react with metals and carbonates,
electricity, tastes sour, turns blue litmus conduct electricity, turn blue litmus red, and neutralize bases. Acids also
red, and neutralizes bases
taste sour, but you should never taste chemicals in the chemistry lab.
Acids are very useful in the food industry: they act as a preservative.
Harmful microorganisms cannot survive in acid. Acids such as vinegar and
lemon juice act as preservatives. Pickles, barbecue sauce, and ketchup all
Food scientists are very have long shelf-lives because they contain a lot of vinegar.
concerned with improving the
shelf-life of foods. To find out
more about this career, Reaction with Metals
GO TO NELSON SCIENCE In Activity 7.1, you discovered that acids react with magnesium to produce
bubbles of gas. If you were to test the gas produced with a burning splint,
WriTing Tip
you would discover that it is hydrogen. Acids typically react with metals to
produce hydrogen. For example, the word and chemical equations for the
Writing a Science Report
When you are writing a science report, reaction of hydrochloric acid, HCl(aq), with zinc are
ask yourself what question you will hydrochloric acid + zinc → hydrogen gas + zinc chloride
answer. For example, if the purpose of
the report is to identify the gas produced 2 HCl(aq) + Zn(s) → H2(g) + ZnCl2(aq)
by the reaction of an acid with a metal,
you might ask “What gas is produced Reaction with Carbonates
when hydrochloric acid reacts with
Acids have another typical reaction: they react with carbonate compounds to
magnesium?”
produce bubbles of carbon dioxide gas. You have witnessed this reaction if
you have ever used vinegar and baking soda to unblock a sink (Figure 2). As
you know, vinegar’s chemical name is acetic acid and baking soda is sodium
hydrogen carbonate. The equations for this reaction are
acetic acid
+ sodium hydrogen → carbon + water + sodium acetate
carbonate dioxide
HC2H3O2(aq) + NaHCO3(aq) → CO2(g) + H2O(l) + NaC2H3O2(aq)
Figure 2 (a) Acids react with

compounds that contain carbonate
ions. (b) The bubbles are produced by
the reaction of vinegar (acetic acid)
and baking soda (sodium hydrogen
(a) (b)
carbonate).

Electrical Conductivity
Many acids are good conductors of electricity. A solution can conduct
electricity only if it contains ions. Since acids are molecular compounds,
they do not contain ions. However, collisions with water molecules
break acid molecules apart to form cations (hydrogen ions) and anions.
Hydrochloric acid, for example, forms hydrogen ions and chloride ions:
HCl(aq) → H+(aq) + Cl−(aq)
Chemical Formulas of Acids

All acids release at least one hydrogen ion when they dissolve in water.
Hydrofluoric acid, HF(aq), for example, forms one hydrogen ion and one
fluoride ion:
HF(aq) → H+(aq) + F−(aq)
Because all acids form hydrogen ions when dissolved in water, chemists
deduce that these hydrogen ions give acids their properties.
You will also notice that the chemical formula of an acid begins with an H
and is usually followed by “(aq).” This is because an acid shows its properties
only when it is dissolved in water. For example, hydrogen chloride is a gas at
room temperature. However, if you accidentally inhaled hydrogen chloride,
it would dissolve in the water in your throat and lungs to form highly
corrosive hydrochloric acid. This is one reason why caution is important
when you smell a substance.
Names of Acids
There are two common groups of acids. One group is called binary acids
because these compounds contain only two elements (Table 1).
Table 1 Common Binary Acids
Acid name Chemical formula Use
hydrofluoric acid HF(aq) etching glass
hydrochloric acid HCl(aq) cleaning concrete
hydrobromic acid HBr(aq) to make cleaning compounds
hydrosulfuric acid H2S(aq) purifying metals
Most acids that you encounter are in a group called oxyacids. They are Figure 3 Phosphoric acid helps give
colas their tart taste. Cola would be very
related to polyatomic ions. Their chemical formulas differ only by one or
sour if it did not also contain so much
more hydrogen ions (Table 2). Phosphoric acid, H3PO4(aq), for example, is sweetener.
the oxyacid related to the phosphate ion, PO43−(aq) (Figure 3).
Table 2 Common Oxyacids and Their Related Polyatomic Ions Learning Tip
Acid Chemical formula Related polyatomic ion Polyatomic ion name Formulas of Oxyacids
The number of hydrogen atoms in
acetic acid HC2H3O2(aq) C2H3O2−(aq) acetate
the formula of an oxyacid is equal to
nitric acid HNO3(aq) NO3 (aq)
−
nitrate the value of the charge of its related
carbonic acid H2CO3(aq) CO32–(aq) carbonate polyatomic ion. For example, the
phosphate ion, PO43−, has an ionic
sulfuric acid H2SO4(aq) SO42−(aq) sulfate charge of −3. Therefore, the chemical
phosphoric acid H3PO4(aq) PO4 (aq)
3−
phosphate formula of phosphoric acid is H3PO4(aq).
NEL 7.2 Properties, Names, and Formulas 269

Properties of Bases
Just as acids are classified by their properties, bases also have a common set
base an aqueous solution that conducts of properties. Like acids, bases conduct electricity and change the colour of
electricity and turns red litmus blue acid−base indicators; unlike acids, bases feel slippery and taste bitter. (Again,
you should never taste chemicals in the chemistry lab.)
DID YOU KNOW? Electrical Conductivity

Alkaline Ashes Bases are electrolytes, meaning that their solutions are good conductors of
The word “alkaline” is sometimes electricity. For example, sodium hydroxide, NaOH, is an electrolyte because
used to describe a basic solution. This
word comes from al-qaliy, an Arabic
it completely separates into its ions as it dissolves in water:
word meaning “the ashes.” The ashes NaOH(s) → Na+(aq) + OH−(aq)
left over from burning plants were an
Many common bases are ionic compounds; they are made up of ions
early source of basic compounds. Early
Canadian pioneers used ashes from (unlike acids, which are molecular compounds made up of molecules). As
burning wood as their source of basic these compounds dissolve in water, their ions are released.
compounds to make soap. Barium hydroxide, Ba(OH)2, is another base. As a pure compound, it
is a solid, but when placed in water, it releases one barium ion and two
hydroxide ions:
Ba(OH)2(s) → Ba2+(aq) + 2 OH−(aq)
Colour with Acid−Base Indicators

Have you ever noticed that clear tea changes colour when lemon juice is
added to it? This is because the acidity of the lemon juice slightly changes the
chemicals that give tea its distinctive colour. Several natural chemicals and
many synthetic (human-made) chemicals change colour when they are
placed in acidic or basic solutions (Figure 4). A substance that changes its
acid−base indicator a substance that colour depending on the acidity or basicity of the solution is known as an
changes colour depending on whether it is acid−base indicator (Table 3).
in an acid or a base
To see videos of acid–base

indicators in action,
Figure 4 An acid–base indicator has a different colour depending on the acidity or basicity
of the solution.
Table 3 Colours of Common Synthetic Acid–Base Indicators
Learning Tip Indicator Colour in acid Colour in base
Indicators to Remember bromothymol blue yellow blue
You do not need to memorize the
phenolphthalein colourless pink
colour changes of most indicators,
but you will find it useful to phenol red yellow red/pink
remember the colours litmus red blue
of phenolphthalein and litmus.
methyl orange red orange/yellow

Names and Chemical Formulas of Bases
Table 4 lists some common bases. Many bases are ionic compounds
containing hydroxide or carbonate ions. Remember that an ionic compound
contains a positive ion (usually a metal) and a non-metal or polyatomic anion.
Table 4 Common Bases and Their Uses
Base Chemical formula Uses

sodium hydroxide NaOH(aq) making paper
calcium hydroxide Ca(OH)2(aq) decreasing the acidity of lakes
and soil
ammonium hydroxide NH4OH(aq) window cleaners
magnesium hydroxide Mg(OH)2(aq) antacids
aluminum hydroxide Al(OH)3(aq) heartburn medications
sodium hydrogen NaHCO3(aq) making baked goods rise
carbonate (baking soda) an abrasive cleaner
UNIT TASK Bookmark

You can apply what you learned about the properties of acids and bases to the Unit Task
described on page 300.
in SUMMARY
• Acids are molecular compounds. In solutions, • Bases are ionic compounds. Many are hydroxides.
acids react with metals, conduct electricity, and In aqueous solutions, they conduct electricity and
change the colours of acid−base indicators. change the colours of acid−base indicators.
• Acids may be binary acids (HCl(aq), HBr(aq)) or • Acid−base indicators show whether a solution is
oxyacids (HNO3(aq), H2SO4(aq)). acidic or basic.
CHECK YOUr Learning

1. Why are solutions of acids and bases often good 7. The fluid inside an alkaline battery can be corrosive. K/ U T/I
conductors of electricity? K /U (a) Describe a chemical test that you could perform to
2. Classify the following substances as being acidic or determine if the substance is an acid or a base.
basic. K/U (b) What safety precautions must you take when
(a) KOH(aq) (d) KHCO3(aq) conducting this test?
(b) HNO3(aq) (e) sodium hydrogen 8. Teeth can be damaged by acid erosion (Figure 5). What foods
carbonate solution could contribute to this problem? How can it be avoided? A
(c) barium hydroxide solution
3. Write the name or chemical formula for each compound
in question 2. K /U
4. What part of an acid’s chemical formula is responsible
for its acidic properties? K /U
5. What polyatomic ion most commonly appears in
bases? K/U
6. People who suffer from bulimia sometimes self-induce
vomiting to prevent weight gain. Consider the properties of
the chemicals in your stomach. Why do the teeth of people
with bulimia often appear worn or eroded? A Figure 5
NEL 7.2 Properties, Names, and Formulas 271

7.3 The pH Scale
Propionibacterium acnes is the species of bacteria that causes acne (Figure 1). All
adults, regardless of whether or not they have acne, have colonies of P. acnes on
DID YOU KNOW? their skin. But why do only some people get acne? One factor that helps prevent
Too Clean? acne is the natural acidity of your skin. While this acidity is not harmful to you,
The acids on your skin are produced
it is toxic to P. acnes colonies and helps limit their growth.
by “good” bacteria. Frequent washing
may kill some of these bacteria,
making your skin less acidic and more
inviting to disease-causing bacteria.
Washing with soap is important for
proper hygiene, but it is also important
to allow your skin time to recover to its
normal acidity between washings.
Figure 1 Propionibacterium acnes

bacteria on the skin can cause acne.
Chemists measure the acidity of a solution using a scale called “pH.”

You may have heard the term “pH” in the media—perhaps in a skin or hair
pH a measure of how acidic or basic a product commercial. But what exactly is pH? pH is a measure of how acidic
solution is or basic a solution is. The pH scale is a numerical scale of all the possible
pH scale a numerical scale ranging from numerical values of pH from 0 to 14 (Figure 2). The pH of a solution can
0 to 14 that is used to compare the acidity range from 0 (for example, car battery acid) to 14 (some industrial-strength
of solutions drain cleaners). A solution with a pH of 7 is considered neutral: neither
neutral neither acidic or basic; with a acidic nor basic. A solution whose pH is less than 7 is acidic; a solution
pH of 7 whose pH is greater than 7 is basic. The surface of healthy skin is slightly
acidic, with a pH of 5.5: enough to keep acne bacteria under control.
pH 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
on 5)
ice
es
ilk
sia
ch
er
te
.3
ne
oe
fe
ra
an
lem (1.
pl
ea
wa
(8
ju
ne
of
bo
lea
at
ap
cle
bl
kc
ag
m
id
da
c
re
ac
to
ia
ain
ac
so
pu
on
bl
h
of
dr
g
ac
m
kin
ilk
om
am
m
ba
st
Figure 2 The pH scale is used to compare the hydrogen ion concentration of a broad range of
substances. Consumer products that are on opposite ends of the scale are corrosive and have
Household Hazardous Product Symbols indicating this on their labels.
You know that acids form hydrogen ions in a solution. The concentration WriTing Tip
of these hydrogen ions is what determines the solution’s pH. (Concentration Using the Right Tone
is a measure of the quantity of a substance dissolved in a given volume of Use a serious and formal tone when
a solution.) The greater the concentration of hydrogen ions in a solution, writing a science report. The report
should focus on the details of the
the stronger the acidic properties. Solutions with the highest hydrogen ion
investigation, not on details about the
concentration are positioned near the “zero” end of the pH scale. In other writer. Avoid first-person and second-
words, highly acidic solutions have a low pH. Highly acidic solutions are very person pronouns such as “I,” “me,”
corrosive and reactive, and must be handled with extreme care. “we,” and “you,” and expressions of
The pH scale also indicates the concentration of hydroxide ions. Solutions personal feelings, reactions, or opinions.
with a pH greater than 7 have a higher concentration of hydroxide ions than
of hydrogen ions. Consequently, solutions with distinctly basic properties,
like some drain cleaners, are positioned near the “14” end of the pH scale.
In other words, solutions that are highly basic have a high pH. Highly basic
solutions are also corrosive and reactive, and require very careful handling.
We can use the word “basicity” to describe a property of a base, just as we
use “acidity” to describe a property of an acid.
Solutions with pH 7 are said to be neutral because their hydrogen and
hydroxide concentrations are equal and balance each other out.
T RY THIS ViSUaLiZe THe pH SCaLe

SKILLS: Observing, Communicating SKILLS HANDBOOK
3.B.
In this activity, you will use colour to simulate the changes in pH 4. Use a new, clean micropipette to transfer one drop of the
that occur as an acid is diluted. mixture in well #2 to well #3.
Equipment and Materials: well plate; micropipette; toothpick; 5. Add 9 drops of tap water to well #3 and stir to mix. (The
dropper bottle of food colouring; water colour of this liquid represents a hydrochloric acid solution
with a pH of 2.)
1. Add one drop of food colouring into the first two wells of the
6. Repeat steps 4 and 5 three more times, transferring a drop
well plate. (The colour of this liquid represents hydrochloric
of the mixture from well #3 to #4, and so on.
acid with pH 0.)
A. What is the pH corresponding to the solutions in wells
2. Using the micropipette, add 9 drops of tap water to the
#4, #5, and #6? T/I
second well. The total volume of liquid in the second well is
B. As you dilute an acid solution, what happens to its
now 10 drops.
concentration? T/I
3. Use a toothpick to mix the contents of the second well. The
C. As you dilute an acid solution, what happens to its pH? T/I
concentration of food colouring in this mixture is one-tenth
the concentration of the original. (The colour of this liquid
represents hydrochloric acid with pH 1.)
pH in Our Lives
We may not be aware of it, but the pH of solutions can have a huge effect on
us: in our bodies, in our homes, and in the wider world. Once we understand
the effects of acids and bases, we can use them to solve all kinds of problems.
pH and Soil
The pH of soil can vary considerably, depending on the type of rock in the
area, the kinds of plants growing there, and the materials that people have
addedintentionally or not. Different plants grow best in different conditions
of soil acidity. Some, such as legumes (beans and clover, for example), grow
Figure 3 Farmers monitor and adjust
best in soil that is slightly basic (pH 7 to 10). Corn thrives in mildly acidic soil the pH of the soil to get the best
(pH 5 to 6) (Figure 3). Potatoes, however, prefer acidic soil that is below pH 5. possible yield from their crop plants.
NEL 7.3 The pH Scale 273

DID YOU KNOW? The pH of soil can sometimes be altered to improve growing conditions.
Acidic Oceans For example, the addition of compost (decaying organic matter) or
Carbon dioxide reacts with falling aluminum sulfate makes soils more acidic. Soil pH can be raised by mixing
rain to form very dilute carbonic acid. in calcium oxide (lime).
In recent years, the concentration
of carbon dioxide in the atmosphere
METAL TOXINS IN SOIL
has increased. This means that rain
is more acidic. Gradually, the oceans There are thousands of sites across Canada where once-clean soil is now
are also becoming more acidic. This contaminated with toxic chemicals. Many of these contaminants are metals.
is becoming a serious ecological Some, like cadmium, come from batteries buried in the ground. Others come
problem.
from industrial processes. For example, the soil near a factory that once
processed lead is likely to have abnormally high levels of lead. One way of
treating the soil involves a technology called acid leaching. In this process,
acid leaching the process of removing soil is first removed from the site. Then it is acidified to dissolve its metal
heavy metals from contaminated soils by contaminants and washed. The cleaned soil can be returned to its original site.
adding an acid solution to the soil and However, this process is very expensive and disruptive to local ecosystems.
catching the solution that drains through
Fortunately, there is a better way! Scientists have discovered that
certain plants are natural “sponges” for metal toxins. As they grow,
these plants absorb metals from the soil (Figure 4). Later, the plants
are harvested and burned. The metals are then recycled from the ashes.
The process of using plants to remove toxins from an area is called
“phytoremediation.”
Figure 4 Scientists at the University of Guelph have found that geraniums are useful
for phytoremediation.
Figure 5 This household product is a pH and Consumer Products

very corrosive substance. It should be
Many of your shampoo and skin care products were probably designed
used with great care. The label cautions
that this product must not be mixed with to have a pH that is close to neutral. Other products, though, are far from
any other cleaning products. neutral. Many cleaning products contain high concentrations of hydroxide
ions. These cleaners are very corrosive. This makes them effective at cleaning
To learn more about Hazardous but also potentially quite damaging to skin and eyes. To warn consumers
Household Product Symbols, of the danger, products with a very high or very low pH are labelled with
GO TO NELSON SCIENCE Hazardous Household Products Symbols (Figure 5).

pH and Swimming Pools
Maintaining a backyard swimming pool requires keeping a close watch on
the pH of the water. Ideally, the pH of the pool water should be maintained
within a narrow range of 7.2 to 7.8 (Figure 6). If the pH falls too much
below 7, pool water irritates the eyes. If the pH increases above 8, the
pool water becomes cloudy and irritating to the eyes, and the chlorine
compounds used to disinfect the pool begin to lose their effectiveness. Many
pool owners use a pH test kit to monitor the pH of their pools on a regular
basis. Hydrochloric acid (also called “muriatic acid”) is often added to pool
water to reduce the pH if it is too high. Conversely, products containing
sodium carbonate can be added to raise the pH when it is too low. Figure 6 The pH of pool water must be
monitored and adjusted regularly.
in SUMMARY
• pH describes the acidity or basicity of a solution. • Solutions that are highly basic or highly acidic
• Solutions with a pH of 7 are neutral. The lower are corrosive and reactive. They must be handled
the pH, the more acidic the solution. The higher with caution.
the pH, the more basic the solution. • Living things are sensitive to small pH changes in
their environment.
CHECK YOUr Learning

1. (a) Describe an idea related to pH that you were aware of 5. How can we make use of acids or bases to
before you started reading this section. (a) remove heavy metals from soils?
(b) When and where did you first learn about this idea? (b) improve crop yields?
(c) How has your understanding of this idea changed? K/U
(c) prevent the growth of micro-organisms in swimming
2. Refer to Figure 2 to write the pH of each of the following pools? A
substances: K /U 6. Why should household products be stored in their original
(a) lemon juice containers? T/I A
(b) milk of magnesia 7. Look around your home for consumer products with a
(c) borax Household Hazardous Product Symbol warning that the
contents are corrosive (Figure 5). K/U A
3. Classify the following solutions as highly acidic, slightly
acidic, neutral, slightly basic, or highly basic: K/U (a) In which room(s) were most of these products found?
(a) a solution with a pH of 13 (b) Using only the information given on the product label,
try to classify these substances as acidic or basic.
(b) a solution with a pH of 6
Caution: Do not open any of these products.
(c) a solution with a pH of 1
8. Some skin creams claim that they are “pH balanced” and
(d) the moisture on your skin yet do not have a pH of 7. What do the manufacturers
(e) water in a swimming pool (ideally) mean when they say “pH balanced”? A
4. (a) Arrange the following list of substances in order of 9. What are the advantages of phytoremediation over acid
increasing acidity: baking soda; tomatoes; stomach leaching in treating contaminated soils? A
acid; bleach; black coffee; pure water. 10. Experiments show that teeth begin to lose minerals at
(b) Describe the pH of the substances in their new pH 5.5 or less. How could you adjust your diet to minimize
order. K /U mineral loss? A
NEL 7.3 The pH Scale 275

The pH of Household Substances SKILLS MENU

In Activity 7.1, Classifying Acids and Bases, you used the colour changes Hypothesizing Observing
the bromothymol blue indicator to distinguish between acids and bases. Planning Evaluating
Bromothymol blue is an example of an acid–base indicator. These Controlling Variables Communicating
substances change colour when the pH of a solution changes. Some,
such as bromothymol blue, are synthetic. Others, such as the juice from
red cabbage, are natural. WriTing Tip
Some acid–base indicators change colour at a specific pH. For Recording Observations
example, bromothymol blue is yellow in acid, and changes to green at Prepare a table with clearly worded
pH 7. Phenolphthalein changes from colourless (in acid) to pink at labels and accurate units of
pH 9. Some, like universal indicator and red cabbage extract, go through measurement or scientific notation at
the top of the columns. If appropriate,
a series of colour changes over a wide range of pH values. This is start with the most important
because they are made up of many substances, each of which changes observations and end with the least
colour at a different pH. important.
In this activity, you will compare the effectiveness of universal
indicator and red cabbage juice at determining the pH of a variety of
household substances. To do this, you will test solutions of pH 1, 3, 5, 7,
9, 11, and 13 with both universal and red cabbage indicators, observing
the resulting colours. You will then use these colours as standards to
determine the pH of solutions of common household products.
SKILLS HANDBOOK
Purpose Procedure 3.B.6., 6.B.
To compare the effectiveness of a natural indicator 1. Read Parts A and B. Prepare a table in which to
(red cabbage extract) with that of universal indicator record your observations.
at determining the pH of household substances. 2. Put on your eye protection and lab apron.
Equipment and Materials Part A: Colour Changes of Universal

• eye protection and Red Cabbage Indicators
• lab apron
3. Label one set of seven wells “red cabbage” 1, 3,
• two 24-well plates
5, 7, 9, 11, 13. Label another set of seven wells
• droppers
“universal” 1, 3, 5, 7, 9, 11, 13. Each pH level
• pH meter (optional)
should have its own well for each indicator.
• swimming
compressed
pool pH testing kit (optional)
dangerously
• prepared
gas
red cabbage extract
reactive material 4. Add two drops of red cabbage extract to each
• dropper
flammable andbottles of
biohazardous
of the “red cabbage” wells. Use a clean dropper
combustible
• prepared
material
infectious material
solutions of pH 1, 3, 5, 7, 9, 11, 13 for each of the pH solutions being tested.
• universal
oxidizing
poisonous and
indicator
infectious material 5. Add two drops of universal indicator to each
• 100 mL beakers of
material
causing immediate
household
and serious toxic products (each of the “universal” set of wells (Figure 1).
effects
with its own dropper), labelled I, II, III, etc. 6. Add two drops of the pH 1 solution to the
poisonous and
corrosive infectious material
Some of the acids and bases used in this investigation are
first well of both indicators. Record your
corrosive. Any spills on the skin, in the eyes, or on clothing
toxic effects observations.
should be washed immediately with cold water. Report any
spills to your teacher.

(a) Determine the pH of each of the household
products, according to the red cabbage indicator,
using the well plate from Part A as your guide.
Indicate the position of each product on a pH
scale (similar to Figure 2 in Section 7.3). K/U T/ I
(b) Determine the pH of each of the household

products, according to the universal indicator,
using the well plate from Part A as your guide. T/ I
(c) Classify each of the substances as acidic or

basic. K/U
Figure 1 First the indicators are added to the wells.

(d) Which household substances were difficult to
7. Add two drops of the pH 3 solution to the classify? Why? T/I
second well of both indicators. Again, record (e) Compared with universal indicator, how effective
your observations. is red cabbage juice as an indicator? Explain. T/I
8. Continue with solutions of pH 5, 7, 9, 11, and 13. (f) Of the two indicators you tested, which do you
Note the colour changes and the pH values at think was most accurate at determining pH?
which they occur. Explain why you think this. T/I C
9. Save the contents of the well plate for Part B. (g) How well were you able to compare the
effectiveness of a natural indicator (red cabbage
Part B: Testing the pH of Household extract) with that of universal indicator? What
could you do to make a better comparison? T/ I
Products
SKILLS HANDBOOK
Remember that you should never consume anything
during a science lab.
Apply and Extend 1.D.2.
(h) Use a pH meter to determine the pH of the

10. Obtain a second well plate.
household products. Use these results to evaluate
11. Add two drops of red cabbage extract to each the effectiveness of acid–base indicators to
well of the first column of the second well plate. determine pH. T/I
12. Add two drops of universal indicator to each (i) Measure the pH of a sample of tap water using a
well of the second column. swimming pool pH test kit. Use small quantities
13. Add two drops of the first household product (I) of the appropriate chemicals to adjust the pH of
to the red cabbage indicator in the first row. Note the water upward and downward within the pH
any colour change that occurs. range of the test kit. A
14. Now add two drops of the household product (I) (j) Research other natural acid–base indicators.
to the universal indicator in the first row. Note Select a set of natural indicators whose colour
any colour change that occurs and compare the changes cover a large range of pH values. Blend
colours with those obtained in Part A. these indicators together to make your own
15. Repeat steps 12 and 13 for the other assigned version of universal indicator. If time permits,
household products: II, III, and so on. Use test the colour changes using the pH solutions
different wells each time. from this investigation. T/I
16. Dispose of the contents of both well plates (k) In a small group, look at some Hazardous
as directed by your teacher. Clean up your Household Product Symbols. Discuss the
workstation. Wash your hands. necessity of adequate accurate labelling of
products. If the containers are not empty, handle
them with the appropriate caution. C A

7.5 Neutralization Reactions
On June 6, 2007, firefighters in Niagara Falls were called to the scene of
a truck accident. A truck carrying potassium hydroxide, KOH, slammed
into a telephone pole and was leaking some of its corrosive cargo. Once the
Firefighters have to know a lot firefighters realized what they were dealing with, they went to a local grocery
of chemistry to deal with the store to purchase what they needed to treat the spill: 40 large bottles of cola.
emergencies they encounter.
To find out more about being a
Remembering their science training, they knew that cola is mildly acidic.
firefighter, The firefighters neutralized the spill with the carbonated beverage and then
GO TO NELSON SCIENCE soaked up the mess with an absorbent material, much like cat litter.
The reaction of potassium hydroxide (base) and the acid in cola is an
neutralization reaction a chemical example of a neutralization reaction. Neutralization reactions occur when
reaction in which an acid and a base react an acid and a base react to form products that have a pH closer to 7 than
to form an ionic compound (a salt) and
either of the reactants. These products are usually an ionic compound
water. The resulting pH is closer to 7.
(sometimes called a “salt”) and water.
You have seen that acids form hydrogen ions in water, and most bases
release hydroxide ions. Think what happens when an acid and a base are
H+(aq) Na+(aq) mixed. The hydrogen ions and the hydroxide ions quickly react to produce
water (Figure 1). As you know, water is neutral, with a pH of around 7.
Not all bases contain hydroxide ions. Some, such as sodium hydrogen
Cl–(aq) OH–(aq) carbonate, have carbonate as their anion. A similar, but more complex,
neutralization reaction takes place between acids and carbonate bases. You
do not need to know the equations for these reactions at this stage of your
chemistry education.
H2O(l) The neutralization reaction is very important in chemistry. It has
Figure 1 The hydrogen ion from the many useful applications in everyday life and affects our society and the
acid and the hydroxide ion from the environment.
base react to form water.
Predicting the Products of
Neutralization Reactions
If we know the reactants of a neutralization reaction, we can predict the
products. Let’s look at the neutralization of hydrochloric acid with sodium
hydroxide to see how this is done. The pattern of the reaction might look
familiar. The chemical equation for this reaction is
HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)
You can see that the sodium ion in NaOH(aq) and the hydrogen ion in
HCl(aq) switch places: this is a double displacement reaction. The sodium
and chloride ions remain dissolved in water. If we evaporated away the
water, we would be left with solid sodium chloride crystals.
Let’s apply the general pattern for double displacement reactions to the
hydrochloric acid–sodium hydroxide example:
HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)
AB + CD → AD + CB
The general formula “AD” fits for water if you think of the chemical
formula H2O as being the same as HOH.

All acid–base neutralization reactions are double displacement reactions. Learning Tip
The resulting ionic compound may remain dissolved in water or may form a Salty Product
precipitate. The general chemical equation for a neutralization reaction is Traditionally, chemists have referred to
ionic compounds as “salts.” You might
acid + base → water + ionic compound therefore see the general equation for a
neutralization reaction written as
Remember the firefighters’ use of cola to neutralize the chemical spill? acid + base → water + salt
Cola contains both carbonic acid, H2CO3(aq), and phosphoric acid, This does not necessarily mean that
H3PO4(aq). The chemical equation for the neutralization of potassium table salt, NaCl, is produced.
hydroxide with phosphoric acid is
H3PO4(aq) + 3 KOH(aq) → 3 H2O(l) + K3PO4(aq)
In this example, the ionic compound produced is potassium phosphate,
K3PO4. Note that three “KOH units” are needed for each H3PO4 molecule.
Why? Because phosphoric acid can release three H+ ions into the solution.
DID YOU KNOW?
The Sour Spike Theory of Acids
Applications of Neutralization Reactions In the seventeenth century, some
There are a lot of acids and bases around. Their properties make them useful scientists believed that acids were
but can also make them hazardous. As we benefit from the positive aspects sour because the particles in an acid
were in the shape of tiny spikes that
of these valuable chemicals, we also have to manage the negative aspects.
pierced the tongue. Base particles
were thought to contain holes on their
Chemical Spills surfaces. During neutralization, the
Sulfuric acid and sodium hydroxide (also called caustic soda) are two of the scientists hypothesized, the spiky acid
most widely used industrial chemicals. Huge quantities of these corrosive particles fit into the holes of the bases,
locking the two particles together.
chemicals are transported annually by truck, rail, or ship. Even with strict
laws controlling how industrial chemicals are transported, accidents happen.
In March 31, 2007, a train was hauling 150 000 L of sulfuric acid near
Englehart in northern Ontario. The train suddenly derailed and spilled
some of its cargo into the Blanche River (Figure 2). An ecological disaster
unfolded. Dead fish washed up on shore, and local residents were warned
not to allow their livestock to drink river water. Luckily, the town of
Englehart gets its drinking water from wells.
The emergency response crew added calcium oxide (lime), CaO(s), to
the river slightly upstream from the spill site. They wanted to neutralize the
acid leaking from the containers.
DID YOU KNOW?

Train Derailments
According to the Transport Safety
Board of Canada, about 570 train
derailments occur each year. More
than a quarter of these trains haul
hazardous chemicals, so the chances
are quite high of a derailment resulting
in a chemical spill.
Figure 2 Derailed tanker cars spilled sulfuric acid near Englehart, Ontario.
NEL 7.5 Neutralization Reactions 279

DID YOU KNOW? This spill cleanup strategy relied on a two-step neutralization reaction:
Large-Scale Chemical Reactions 1. Calcium oxide, CaO, reacts in water to form basic calcium hydroxide:
Calcium oxide (lime) is also widely
used to raise the pH of lakes acidified CaO(s) + H2O(l) → Ca(OH)2(aq)
by acid precipitation. 2. Calcium hydroxide neutralizes sulfuric acid in the river, producing a
harmless solution of water and calcium sulfate:
Ca(OH)2(s) + H2SO4(aq) → 2 H2O(l) + CaSO4(aq)
During this procedure, the pH of the river water downstream was carefully
monitored to ensure that just the right amount of lime was being added.
Antacids
Your stomach produces a solution of hydrochloric acid with pH as low as
1.5. The acid is needed for digestion. Sometimes, however, stomach acid can
irritate the lining of the stomach, leading to discomfort or pain. Antacids
provide relief by neutralizing stomach acid. The two most common active
ingredients in antacids are hydroxide and carbonate compounds.
Milk of magnesia is a typical antacid containing magnesium hydroxide. It
is a thick paste because magnesium hydroxide (a base) is not very soluble in
water. As it is not very soluble, it releases only a relatively low concentration
of hydroxide ions. This explains why you can swallow milk of magnesia
Figure 3 The active ingredient in milk without suffering a chemical burn (Figure 3). However, once in your
of magnesia is magnesium hydroxide. stomach, magnesium hydroxide effectively neutralizes stomach acid:
2 HCl(aq) + Mg(OH)2(aq) → 2 H2O(l) + MgCl2(aq)
WriTing Tip
Powdered antacids usually contain sodium hydrogen carbonate (baking
Analyzing and Evaluating soda), NaHCO3(s), as the active ingredient:
When you write the Analysis
and Evaluation for an activity or HCl(aq) + NaHCO3(aq) → CO2(g) + H2O(l) + NaCl(aq)
investigation, explain how they connect As you can see, the neutralization reaction between an acid and a
with the reason for doing the lab.
carbonate base is not a simple double displacement reaction. You do not
have to write equations for this type of reaction.
T RY THIS neUTraLiZe iT
SKILLS HANDBOOK
SKILLS: Questioning, Observing, Analyzing, Communicating 3.B.7.
Is milk of magnesia effective at neutralizing hydrochloric acid? You 4. Add 5 drops of universal indicator to the flask. Swirl gently
gas
universal indicatordangerously
will usecompressed in this activity. The colours of universal
reactive material
to mix the contents of the flask.
indicator are red—very acidic; orange/yellow—acidic; 5. While continuously swirling the flask, slowly add the
flammable and
green—neutral;
combustible blue—basic; purple—very basic.
biohazardous
infectious material
hydrochloric acid, about 10 drops at a time.
material
Equipment and Materials: eye protection;
poisonous and lab apron; 6. Continue to add acid until the mixture turns green.
250 mLoxidizing
Erlenmeyer flask;infectious
teaspoon;materialwater; milk of magnesia; 7. Add a slight excess of acid (about 10 drops) until the solution
causing immediate
droppermaterial
bottle of universal
andindicator;
serious toxic dropper bottle of dilute is no longer cloudy.
effects
hydrochloric acid, HCl(aq) A. What observation told you that the magnesium hydroxide was
poisonous and
completely neutralized? K/U
Hydrochloric acid isinfectious
corrosive
material
corrosive.materialAvoid spills on skin, clothing,
causing other
or in the eyes. Washtoxicspills
effectsimmediately with cold water and
B. Suggest why the solution was no longer cloudy after step 7. T/ I
alert your teacher. C. A homemade remedy for heartburn is to drink a glass of water
1. Put on your eye protection and lab apron. containing half a teaspoon of baking soda. Do you think this
remedy is effective? Why or why not? T/I
2. Add about 150 mL of tap water to the flask.
3. Add about a quarter of a teaspoon of milk of magnesia.
CSH-F01-SHOS10SB.ai

UNIT TASK Bookmark
You can apply what you learned about neutralizing acidic solutions to the Unit Task
in SUMMARY
• Acids and bases react together in neutralization • The products of a neutralization reaction are
reactions. water and an ionic compound (salt).
• At the end of a neutralization reaction, the pH is • Neutralization reactions have environmental and
closer to 7 (neutral) than it was for either of the consumer applications, including restoring lakes
reactants. affected by acid precipitation.
CHECK YOUr Learning

1. (a) What do we mean when we describe a solution as 6. Calcium oxide, CaO, is a common ingredient in cement.
being neutral? Based on what you have learned in this section, what
(b) Describe the pH changes expected if an acid is used precautions should a bricklayer take when mixing
to neutralize a base with pH 12. K/U cement? Why? A
2. Write the chemical equations for each of these acid–base 7. The hard parts of coral and shellfish are mostly made up
reactions. (The formulas of acids and bases are given in of calcium carbonate. Evidence suggests that air pollution
Tables 1, 2, and 4 in Section 7.2.) K/U is causing the oceans to become slightly acidic.
(a) hydrochloric acid and potassium hydroxide (a) What kind of chemical reaction occurs when acids are
in contact with calcium carbonate? T/I A
(b) sulfuric acid and potassium hydroxide
(b) Write the chemical equation for the reaction of sulfuric
3. (a) The cola that the firefighters used in the opening
acid with calcium carbonate.
example contains both phosphoric acid and carbonic
acid. Write the chemical equation for the neutralization (c) What effect would this reaction have on coral
of potassium hydroxide solution with carbonic acid ecosystems? Explain.
(from cola). 8. Lead acid batteries used in cars contain a concentrated
(b) Predict the approximate pH change that occurs during solution of sulfuric acid. When these batteries are
this reaction. K/U T /I recycled, their sulfuric acid is drained and neutralized to
produce water and sodium sulfate. Suggest a compound
4. Which would be the best to neutralize a large acid spill
that could be used to neutralize sulfuric acid and produce
in your school lab: sodium hydroxide or baking soda?
sodium sulfate. Justify your choice by writing the chemical
Explain. A
equation for the reaction. T/I
5. Figure 4(a) shows a pink mixture of sodium hydroxide and
9. Fish muscle contains bases that give cooked fish their
phenolphthalein indicator being injected into a lemon. The
“fishy” odour. Suggest why a squirt of lemon juice often
lemon was then cut in half (Figure 4(b)). Explain why the
makes this odour disappear. A
inside of the lemon was not pink. T /I
10. Over time, a crusty deposit of calcium carbonate
forms on the heating element inside a kettle. Use your
understanding of acids and bases to suggest a way to
remove this deposit. A
(a) (b)
Figure 4
NEL 7.5 Neutralization Reactions 281

Analyzing an Acid Spill SKILLS MENU

You are an environmental scientist involved in monitoring the effect Hypothesizing Observing
of a sulfuric acid spill near a river. Each day for a week, you collect Planning Evaluating
a sample of river water from a point just downstream of the spill Controlling Variables Communicating
site. To compare the acidity of the samples, you count the number
of drops of sodium hydroxide solution needed to neutralize each
sample. The chemical equation for this reaction is
Figure 1 Bromothymol blue
H2SO4(aq) + 2 NaOH(aq) → 2 H2O(l) + Na2SO4(aq) indicator is yellow in an
acidic solution (on the left),
You use bromothymol blue indicator to show when green in a neutral solution,
the samples are neutralized (Figure 1). and blue in a basic solution
(on the right).
Equipment and Materials (d) Describe the shape of your graph. What
• eye protection information does it communicate? K/U T/ I
• lab apron (e) How many days did it take for the river to return
• 125 mL Erlenmeyer
compressed flask
dangerously
to a neutral pH? T/I
gas
• pH meter (optional)
reactive material
(f) How did adding sodium hydroxide to the
flammable and
• dropper
combustible bottles of
biohazardous samples help you determine their acidity? K/U T/ I
infectious material
material
• dilute sodium hydroxide, NaOH(aq) (g) Evaluate this method of determining acidity. T/ I
poisonous and
• bromothymol blue indicator
infectious material
Apply and Extend

oxidizing
causing immediate
material
• seven contaminated river-water
and serious toxic
effects
samples labelled
“Day 1,” “Day 2,”poisonous
etc. and (h) The following chemical equation represents the
corrosive infectious material neutralization of sulfuric acid with calcium
Sulfuric
material acid and sodium hydroxide are corrosive. Sodium
causing other
hydroxide can causetoxic effects
blindness if splashed in the eyes. hydroxide:
Wash any spills on skin or clothing immediately with plenty H2SO4(aq) + Ca(OH)2(aq) → 2 H2O(l) + CaSO4(s)
of cold water. Report any spills to your teacher. How would your observations differ if calcium
hydroxide were used in the analysis rather than
Procedure sodium hydroxide? Why? Refer to chemical
1. Write a series of detailed steps for your equations for both reactions in your answer. T/ I
Procedure, including safety precautions.

(i) A pH meter can measure small changes in pH
2. Create a table in which to record your (Figure 2). If your school has a pH meter, use it
observations. to measure the pH of the water samples. Record
3. With your teacher’s approval, carry out your your observations and
Procedure. plot a graph. How does
this graph differ from
SKILLS HANDBOOK
6.B.
the graph you created
(a) What did you have to keep constant to ensure that in question (c)? T/I
your test was fair? T /I
(b) What is the relationship between acidity and the Figure 2 A pH meter
number of drops of base required? T /I
UNIT TASK Bookmark
(c) Plot a graph of the number of drops of sodium
You can apply what you learned about measuring pH to the
hydroxide required to neutralize the acid against Unit Task described on page 300.
time (Day 1, Day 2, etc.). C

7.7
Minimizing Risk for a SKILLS MENU
Community
An Ontario detergent manufacturer is considering Alternatives Evaluating
Analyzing the Issue
adding another shift to its production schedule at its
central Ontario plant (Figure 1). This will create 25
new jobs—great news for the nearby town with high You have been asked to present both options
unemployment. Increased production requires more to a meeting involving the town mayor, the local
raw materials, including concentrated sulfuric acid. The Member of Parliament, a representative from an
challenge is how to supply the additional sulfuric acid environmental group, and the president of the
while minimizing the risk to the local environment. detergent company. You should outline the risks
and benefits of each option and then recommend
one of them.
Goal
To decide which proposal best meets the needs of the
community, the company, and the environment and
to recommend this decision at the meeting.
Gather Information
Work in pairs or small groups to learn more about
• the manufacture of sulfuric acid
• the hazards involved in storing and transporting
Figure 1 What is the best way to transport sulfuric acid?
sulfuric acid and sulfur
SKILLS HANDBOOK • rail accidents involving hazardous chemicals
The Issue 4.C.
• ways to minimize the risks of each option
You are a member of an independent consulting
firm hired to investigate possible solutions. In your GO TO NELSON SCIENCE
opinion, the two best options are as follows:
Discuss the two options, comparing the risks and
• Build a small sulfuric acid production plant next
benefits of each. T/I C
to the detergent plant. The initial construction and

setup costs will be significant. The raw material
for manufacturing sulfuric acid is sulfur, which is
Make a Decision
a waste product from the smelting of nickel ore. Which proposal do you recommend for supplying the
A nearby nickel company can supply the sulfur detergent factory with sulfuric acid? What criteria did
at no cost. The company could recoup its initial you use to decide? C A
investment in about five years. The sulfur would

have to be transported from the nickel smelter Communicate
by truck along the road through town. Once the Complete a report that will be presented to the
factory is in full production, large quantities of meeting. The report should outline the benefits
sulfuric acid would be produced and stored on site. and risks of each option and how those risks
• Increase the current train shipments of sulfuric could be minimized. It should conclude with a
acid to the factory from the supplier located recommendation. C A
200 km away. The rail line runs near the river

that is the town’s main source of drinking water.
SCIENCE OSSLT
Painting Out Pollution

Imagine a city whose roads and buildings neutralize acidic air
pollutants on contact. Does this sound too good to be true?
Believe it or not, the technology already exists. Researchers in
Italy and Hong Kong have developed a pollution-fighting coating UV rays titanium dioxide, TiO2
(sunlight)
that can be painted onto pavement and the walls of buildings.
nitric acid, NHO3
The active compounds in this coating are titanium dioxide, TiO2,
and calcium carbonate, CaCO3. You probably brushed your teeth
with titanium dioxide this morning: it is a common whitening water, H2O
agent in toothpaste. Calcium carbonate is found in limestone calcium carbonate,
rock, blackboard chalk, and antacid tablets. It is widely available, nitrogen dioxide, NO2 CaCO3
inexpensive, and safe.
water, H2O
The pollution-fighting technology relies on a unique carbon dioxide,
property of titanium dioxide: it can absorb ultraviolet radiation from CO2
the Sun (Figure 1). This is why titanium dioxide is used in many calcium nitrate,
sunblock lotions. Ca(NO3)2
The energy that the titanium dioxide absorbs is transferred
to airborne water molecules that collide with the surface. It turns
out that the quantity of energy transferred is just the right amount
to make water react with nitrogen dioxide, a serious air pollutant. Figure 1 A series of reactions converts toxic nitrogen dioxide gas to
relatively harmless compounds.
The reaction of nitrogen dioxide with water produces nitric acid.
The acid is then neutralized by calcium carbonate particles
in the coating.
The carbon dioxide and water from this reaction return to
the air. Calcium nitrate is washed harmlessly to the ground by C07-F28-UBOS10SB.ai
rainwater. The titanium oxide is not used up in this reaction. It
remains available to absorb and transfer energy indefinitely.
Roadways and buildings in cities across Europe have been
covered with this coating (Figure 2). Designers have developed
decorative panels that can be retro-fitted onto existing buildings
or surfaces in polluted areas. Where it is in use, area residents
immediately reported a noticeable improvement in the air quality.
They were right: analysis of theOntario Science
air at street 10 SBthat
level showed
nitrogen dioxide concentrations0-17-635528-6
were reduced to about 40 % of
their previous levels! FN C07-F28-UBOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 1st pass
Approved Figure 2 This church in Rome is coated with white cement that
Not Approved contains titanium dioxide. The titanium oxide helps the surface stay
white, as well as fight pollution.
OSSLT
284 NEL
Acid Precipitation 7.8
The air currently filling your lungs is made up of millions of molecules.
These molecules have probably already been in the lungs or bloodstreams of
the people around you or even the people who live on the other side of the
world. You share air with everyone and everything in your environment. This
includes wildlife, grass, automobiles, lakes, factories, and even your pet dog.
Air is constantly on the move and carries some rather interesting cargo:
bacteria, dust particles, moisture, traces of pollutants, and so on. Some
of these pollutants may be natural, and some may be the result of human
activity. Some air pollutants concern scientists, environmentalists, and the
general population because they contribute to acid precipitation (Figure 1).
The twentieth century was a good time in North America for industrial
and economic growth but a bad time for the natural environment. All that
industrial growth resulted in the production of vast quantities of chemicals,
many of which polluted the air, ground, and water.
Figure 1 Emissions of sulfur dioxide and nitrogen oxides combine with water in the atmosphere
to form acids that fall back to Earth as acid precipitation (rain, snow, and sleet). Acid-forming
pollutants can also fall to Earth directly as dry deposition (particles or gases).
What Is Acid Precipitation?

Acid precipitation is a term used to describe any precipitation (rain, acid precipitation any precipitation
snow, fog) that has become acidic from reacting with compounds in the (e.g., rain, dew, hail) with a pH less
than the normal pH of rain, which is
atmosphere. Acid precipitation forms when certain pollutants—most
approximately 5.6
importantly sulfur dioxide and nitrogen oxides—combine with water in the
atmosphere before falling to Earth. Acid precipitation has a pH less than
about 5.6—the normal pH of rain.
NEL 7.8 Acid Precipitation 285

dry deposition the process in which There is another way that acidic substances can reach Earth: dry
acid-forming pollutants fall directly to deposition occurs when acid-forming chemicals fall directly onto surfaces
Earth in the dry state
like soil or leaves. These particles form acids when they come in contact
with water on these surfaces.
Sources of Acid-Forming Pollutants

Several pollutants lead to acid precipitation. Two that are of particular
concern are sulfur dioxide, SO2, and nitrogen oxides, NOx.
Sulfur Dioxide, SO2
DID YOU KNOW? Sulfur dioxide is a clear, colourless gas that has a strong, choking odour. As
Venus: Extreme Acidic Rain Figure 2 shows, most of Canada’s production of sulfur dioxide comes from
There is so much volcanic activity industry. This includes burning coal to generate electricity and the mining
on Venus that much of the planet and refining of metals. Smelting is a process used to separate a metal from
is permanently covered in a dense,
the ore extracted from the ground. Smelting involves heating the ore to high
swirling cloud of sulfuric acid. This is
just one of the challenges faced by temperatures and collecting the molten metal. During the process, any sulfur
engineers designing interplanetary present in the ore reacts with oxygen in the air, forming sulfur dioxide gas:
probes to investigate Venus.
S(s) + O2 (g) → SO2(g)
The same reaction takes place during the combustion of fossil
fuels—which generally contain some sulfur. Over half of the electricity
generated in the United States comes from the combustion of coal. As a
result, over 50 % of the sulfur dioxide emissions that reach Eastern Canada
come from the United States (Figure 3).
Canadian Emissions of Sulfur Dioxide
Total: 2.3 million tonnes/year (2004)
Non-road transportation
2%
Solvents <1 %
On-road transportation
<1 % Other <1 %
H2SO4, HNO3
Generating
electricity
27 %
ATLANTIC
Industrial OCEAN
SO2, NOx
69 %
Non-industrial
0 400 800 km
2%
Figure 2 Sources of sulfur dioxide emissions Figure 3 Most of the acid-causing

in Canada pollutants falling on Ontario come from
the United States.
Once in the atmosphere, sulfur dioxide reacts with more oxygen to

produce sulfur trioxide:
C07-F19-UBOS10SB.ai
2 SO2(g) + O2(g) → 2 SO3(g)
Then sulfur trioxide combines with water droplets in the atmosphere to
form sulfuric acid:
SO3(g) + H2O(l) → H2SO4(aq)
Nitrogen Oxides, NOx Canadian Emissions of Nitrogen Oxides
Total: 2.5 million tonnes/year (2004)
NOx is a general chemical formula used to represent a
number of nitrogen oxides, including nitrogen monoxide, Solvents <1 % Other <1 %
NO, and nitrogen dioxide, NO2. Most of the nitrogen oxide
emissions in North America are produced by vehicles that
Non-road
burn fossil fuels—mostly gasoline (Figure 4).
transportation Industrial
The temperatures inside the internal combustion engine 29 % 36 %
of a car or train are high enough for atmospheric nitrogen
and oxygen to react to form nitrogen monoxide: On-road
N2(g) + O2(g) → 2 NO(g) transportation
22 %
Pollution-control technology in today’s vehicles reverses
this chemical reaction, converting nitrogen monoxide Non-industrial 3 %
back into harmless nitrogen and oxygen. However, some
Generating electricity
nitrogen monoxide still escapes into the atmosphere. There 10 %
it reacts with more oxygen to produce toxic, reddish-brown Figure 4 Sources of nitrogen oxide emissions in Canada
nitrogen dioxide:
2 NO(g) + O2(g) → 2 NO2(g)
In Section 5.11, you learned that nitrogen dioxide is one of the gases that
make up smog. In the atmosphere, nitrogen dioxide combines with water to
produce nitric acid and more nitrogen monoxide:
3 NO2(g) + H2O(l) → 2 HNO3 (aq) + NO(g)
Environmental Impact of Acid Precipitation

Acid precipitation has a serious effect on almost every part of Ontario’s
environment, from the soil to the Great Lakes.
Aquatic Ecosystems
Aquatic life can tolerate only
minor changes in the pH of the pH 6.5 pH 6.0 pH 5.5 pH 5.0 pH 4.5 pH 4.0
water in their environments trout

(Figure 5). As the pH decreases,
the youngest and most fragile bass
organisms die first (Figure 6).
The loss of fish affects organisms perch
that are higher on the food
chain. Predators such as loons, frogs
ospreys, otters, and larger fish
must find other sources of food salamanders
or move elsewhere to survive.
clams
crayfish
snails
mayfly
Figure 5 As the acidity of a lake Figure 6 At pH 5, many young fish fail to develop properly and many invertebrates are killed. Some
increases, loons have less available food. adult fish may be able to tolerate pH levels as low as 4, but they cannot survive without food.
C07-F29-UBOS10SB.ai
DID YOU KNOW? Acid precipitation can indirectly cause another problem for aquatic life:
Fish Heart Attacks aluminum ions can be washed from acidified soil into the streams and lakes,
An increase in the acidity of lake where they damage the gills of fish, causing them to suffocate.
water can increase the viscosity of a
fish’s blood. The thickened blood can Soils
become so difficult to pump that the
Acid precipitation can have a drastic effect on soil. Acidic groundwater can
fish dies of a heart attack.
dissolve and wash away metal ions. Some ions, such as calcium, magnesium,
and potassium, are essential nutrients for plant growth. Others, including
aluminum, are toxic to plants and to aquatic life.
All soils have some ability to resist changes in acidity. This ability, called
buffering capacity the ability of a buffering capacity, depends on substances in the soil that act like bases,
substance to resist changes in pH neutralizing the acid. If a soil’s buffering capacity is high, acids passing
through the soil are neutralized before reaching nearby streams or lakes.
Soils in areas where the rock is mostly limestone have high buffering
capacities. Limestone is mostly made up of calcium carbonate, CaCO3,
which neutralizes acids:
CaCO3(s) + H2SO4(aq) → CaSO4(aq) + H2O(l) + CO2(g)
However, neutralization reactions use up buffering minerals in the soil, so
the buffering capacity eventually decreases.
Forests
The buffering capacity of soil partially protects forests from the effects of
acid precipitation. If the soil has only a small buffering capacity, however,
it can only neutralize a small “dose” of acid. Then the soil loses valuable
nutrients needed for trees to grow properly. Acid precipitation rarely kills
trees directly, but it weakens the trees. They are then more vulnerable to
diseases, strong winds, or extreme cold (Figure 7).
Figure 7 Acid precipitation kills

mature trees and prevents young
trees from growing.
The Economic Impact of Acid Precipitation

We know that acid precipitation can harm the environment, but it can also
harm the Canadian economy. For example,
• Environment Canada estimates that poor growing conditions result,
every year, in the loss of wood valued at billions of dollars.
• A reduction in fish stocks has already affected Ontario’s multibillion
dollar recreational fishing industry.
• Acid precipitation damages steel structures, limestone buildings, and
stone monuments (Figure 8).
Figure 8 The first photograph of George
Washington (a) was taken in 1935. The
second (b), was taken in 1994. The
effect of acid precipitation on the face of
(a) (b) the statue over those 59 years is quite
obvious.
Cleaning Up Acid Precipitation

Since 1980, there have been reductions in both SO2(g) and NOx(g) emissions
in North America (Table 1). Scientists predict that emissions of both
pollutants will continue to decline until 2020. This improvement has been
achieved by
• switching to low-sulfur fossil fuels to generate electricity
• the installation of scrubbers to remove sulfur from the emissions of
smelting operations and fossil fuel-burning power plants
• improvements in the pollution control equipment on vehicles
• stricter laws governing vehicle emissions (such as Ontario’s Drive Clean
Program)
Table 1 Trends in the Emission of Acid-Forming Pollutants

1980 to 2000 Predicted 2000 to 2020
Eastern Canada U.S. Eastern Canada U.S.
SO2 reduction 53 % 40 % 21 % 38 %
NOx reduction 17 % little 39 % 47 %
Source: Environment Canada 2004 Canadian Acid Deposition Science Assessment
These reductions are bringing some encouraging signs. For example, the
pH of some lakes has increased to more normal levels. This is especially
noticeable near smelters that have been fitted with technologies that
significantly reduce emissions. There has also been some improvement
in the wildlife observed in these lakes. For example, populations of loons
have increased. The food chains in these lakes remain fragile, however. For
improvements to continue, further reductions are needed.
Not all of the news is good either, however. Despite these reductions,
many of Ontario’s ecosystems are still far from healthy. According to a 2004
Environment Canada assessment, ecosystems in Ontario have not yet fully
recovered from the effects of acid precipitation in the twentieth century.
Furthermore, many regions in Ontario are still receiving more acidic
precipitation than their ecosystems can safely absorb.
It will take a long time for Ontario’s ecosystems to recover completely from
the effects of acid precipitation—much longer than it took to pollute them!

UNIT TASK Bookmark
You can apply what you learned about acid precipitation and its effects to the Unit Task
in SUMMARY
• Acid precipitation is any precipitation that has a • Steps taken to reduce the effects of acid
pH less than the normal pH of rain. precipitation include using low-sulfur fuels,
• Acid precipitation is caused by pollutants (mostly adding scrubbers to smokestacks, installing
SO2 from burning fossil fuels and NOx from catalytic converters to vehicles, and enacting
vehicle engines) reacting with water in the air to stricter anti-pollution laws.
form acids. • The production of pollutants is decreasing but is
• Acid precipitation can have serious still causing damage in some areas. Other areas
environmental and economic impacts. are starting to recover.
CHECK YOUr Learning

1. In your own words, define K/U 9. What is the prediction for acid precipitation over the next
(a) acid precipitation decade? K/U
(b) buffering capacity 10. What evidence is there that the environment is beginning
to recover from the effects of acid precipitation? K/U
2. (a) How do acid rain and acid precipitation differ?
11. (a) Calcium oxide, CaO, reacts with water to form calcium
(b) Acid precipitation is sometimes called “wet
hydroxide. Write the chemical equation for this reaction.
deposition.” Why is this term appropriate?
(b) Why is calcium oxide capable of neutralizing acids
(c) How do wet and dry deposition differ? K/U
despite not having the hydroxide ion in its chemical
3. Rain is naturally acidic. Under what conditions does formula?
“normal” rain become “acid” rain? K/U
(c) Explain why adding calcium oxide (sometimes called
4. (a) What two groups of compounds are largely responsible “lime”) to lakes polluted with acid precipitation solves
for causing acid precipitation? the problem only for the short term.
(b) Write a chemical equation(s) to illustrate how one of (d) Suggest a permanent solution to the
these compounds reacts to produce acid problem. K/U T/I A
precipitation. K/U
12. Why is global co-operation essential in our battle against
5. Look at Figures 2 and 4 in this section. K/U A
the effects of acid precipitation? A
(a) What percentage of sulfur dioxide and nitrogen oxide 13. Consider two neighbouring lakes in an isolated region
emissions came from transportation in 2004? of Ontario. One lake is on limestone (calcium carbonate)
(b) Suggest two things that you could do to reduce the while the other is lined with granite. Both receive the
amount of acid pollutants resulting from transportation. same amount of acid precipitation. A
6. Look at Figure 5 in this section. K/U
(a) Explain why the limestone lake has a higher pH than
(a) Which aquatic animals are most tolerant of acidic the granite lake.
conditions? (b) Which lake is likely to have a healthier aquatic
(b) Which animals are most affected by acidic conditions? ecosystem? Explain your answer.
7. Briefly outline at least three damaging effects that acid 14. Why are the populations of young aquatic animals in an
precipitation may have on the environment. A ecosystem often a good indicator of the overall health of
the ecosystem? A
8. List two economic impacts of acid precipitation. A

TECH ConnEct OSSLT
Scrubbers: Antacids for

Smokestacks
Over the past 30 years, there have been significant reductions in The Technological Solution
the emissions of pollutants that cause acid precipitation. Much of To remove the sulfur dioxide, combustion gases—including sulfur
this success is due to advancements in technologies, including the dioxide—are first fed into a large scrubber tower (Figure 1).
installation of sulfur dioxide scrubbers into smokestacks. There, these gases are showered with a fine paste-like mixture of
limestone and water. The limestone paste absorbs sulfur dioxide
The Problem
from the combustion gases and converts it into calcium sulfite,
The smelting of nickel ore is a major source of sulfur dioxide
CaSO3. The chemical equation for this reaction is
emissions. Smelting involves heating the ore and collecting the
molten metal. During the process, sulfur in the ore reacts with CaCO3(s) + SO2(g) → CaSO3(s) + CO2(g)
oxygen in the air, forming sulfur dioxide gas. The sulfur dioxide The remaining combustion gases continue up the scrubber
mixes with the products of combustion: water and carbon tower and are released. Calcium sulfite particles fall to the bottom
dioxide. This is the mixture that used to billow from the of the tower, where they can be removed. The waste calcium
smokestacks of nickel smelting plants. Once in the atmosphere, sulfite can then be chemically converted into gypsum, which can
sulfur dioxide reacts with water to form sulfuric acid. The acid be used to make drywall.
then falls to Earth as acid precipitation. There are other technologies that can reduce the release of
In the past, this reaction caused serious environmental sulfur dioxide into the atmosphere. These include capturing sulfur
damage in nickel-producing areas like Sudbury. It remains a dioxide and turning it into a valuable product: sulfuric acid.
problem in countries with less strict environmental laws than Making products that can be sold turns pollution reduction
Canada’s. As long as there is a demand for nickel, we will be into a profitable process.
faced with the problem of cleaning up smelter emissions.
H2O and CO2

combustion chamber scrubber water vapour and
carbon dioxide
H2O,CO2,
and SO2 chimney
limestone/
water
mixture
nickel ore, combustion pump

oxygen, and fuel gases
Figure 1 Companies that produce scrubbers claim that their products

remove up to 95 % of the sulfur dioxide in combustion emissions.
NEL 291
CHAPTER
LOOKING BACK
7
Acids are aqueous solutions Bases are aqueous solutions Acids and bases have a
that have characteristic that have characteristic significant impact—both
properties. properties. good and bad—on society
and the environment.
• Acids turn indicators specifi c • Bases turn indicators specifi c
colours (e.g., bromothymol colours (e.g., bromothymol • Chemical spills can seriously affect
blue becomes yellow; litmus blue becomes blue; litmus natural ecosystems. (7.3, 7.6)
becomes red). (7.2) becomes blue). (7.2) • Acids can be used to remove heavy
• Acids have a pH less than 7. • Bases have a pH greater than 7. metal contaminants from soil. (7.3)
(A pH of 7 is neutral.) (7.3) (7.3) • Acids are added to processed foods
• Acidic solutions result when • Basic solutions result when certain for taste or as a preservative. (7.3)
certain molecular compounds form ionic compounds release hydroxide • Bases are widely used in cleaning
hydrogen ions in the solution. (7.2) ions into the solution. (7.2) products. (7.3, 7.4)
• Acids neutralize bases. (7.5) • Bases neutralize acids. (7.5) • Products have been developed to
modify the pH of swimming pools,
skin, soil, stomach contents, and
corrosive chemical spills. (7.3–7.5)
The acidity of solutions is Acids and bases react Industrial and vehicle
measured using the pH together in neutralization emissions that cause acid
scale. reactions. precipitation can be reduced
by technology.
• pH is a term used to describe how • Acids and bases react to produce
acidic or basic a solution is. (7.3) water and an ionic compound. (7.5) • Precipitation with pH below 5.6
• The pH of a solution can be altered • When an acid and a base mix, the pH is considered acid precipitation
by adding an acid or base. (7.5) moves closer to 7 (neutral). (7.5) (7.3, 7.8)
• Most ecosystems function • Neutralization reactions can be • Sulfur dioxide, SO2, and nitrogen
best when the pH is near 7. used to offset the effects of acid oxides, NOx, are the two main
(7.3, 7.6–7.8) precipitation in terrestrial and aquatic causes of acid precipitation (7.8)
ecosystems. (7.5, 7.8) • Pollution reduction technologies
• Acid spills can be neutralized by (e.g., scrubbers) use chemical
adding a base and vice versa. reactions to remove acid-forming
(7.5, 7.8) pollutants. (7.8)
• Consumer products rely on
neutralization reactions to neutralize
acid. (7.5, 7.6)

THINK NOW? acid (p. 268)
base (p. 270)
You thought about the following statements at the beginning of acid–base indicator (p. 270)
the chapter. You may have encountered these ideas in school, pH (p. 272)
at home, or in the world around you. Consider them again and pH scale (p. 272)
decide whether you agree or disagree with each one. neutral (p. 272)
acid leaching (p. 274)
neutralization reaction (p. 278)
acid precipitation (p. 285)
dry deposition (p. 286)
buffering capacity (p. 288)
1 Stomach acid can dissolve metals

like the coin in this child’s stomach.
4 We all contribute to the production of
acid precipitation.
2 Even diet soft drinks can cause tooth

decay.
5 Medications for heartburn work by
cooling the stomach.
FPO
BIG Ideas
3 All acids are dangerous.
Agree/disagree?
6 Soft drinks can be used to make
spilled drain cleaner safer. each other in predictable
Agree/disagree? ways.
✓ Chemical reactions may
How have your answers changed?
What new understanding do you have? address environmental
challenges.

CHAPTER
REVIEW
7
The following icons indicate the Achievement Chart K/U
Knowledge/Understanding T/I
category addressed by each question. C
Communication A
Application
What Do You Remember? 8. Complete the following word equations. (7.5) K/U
1. Name the following compounds. (7.2) K/U

(a) hydrochloric acid + →
water + potassium chloride
(a) H3PO4(aq) (d) H2SO4(aq)
(b) sulfuric acid + calcium hydroxide →
(b) HBr(aq) (e) Ca(HCO3)2
+
(c) Fe(OH)3 (f) KNO3
(c) phosphoric acid + sodium hydroxide →
2. In your own words, define the terms “acid” water +
and “base.” (7.2) K/U
9. Write balanced chemical equations for the word

3. (a) What gas is produced when acids react with equations in question 8. (6.3, 7.5) K/U T/I
metals like magnesium?

(b) What atoms cause the acidity of an acid? 10. Describe, in your own words, the process of
(c) What colour is bromothymol blue indicator acid–base neutralization. (7.5) K/U
in an acid and in a base? 11. (a) Write the word and chemical equations
(d) What are the typical products of a for the reaction of nitric acid with calcium
neutralization reaction? hydroxide.
(e) How is pH related to acidity? (7.2, 7.3, 7.5) K/U
(b) This reaction can be classified in two
4. (a) What two pollutants are primarily ways. Name these two types of reactions.
responsible for acid precipitation? (6.6, 7.5) K/U
(b) Which human activities are the major

12. (a) When fossils fuels are burned, a chemical
sources of these pollutants?
is released that causes acid precipitation.
(c) Identify two technologies used to decrease
Describe this process, including chemical
the emissions of these pollutants. (7.8) K/U
equations.
What Do You Understand? (b) Name one technology that can reduce this
problem. Briefly outline how this technology
5. Consider these seven compounds: H3PO4(aq),
works. (7.8) K/U A
HBr(aq), Fe(OH)3, H2SO4(aq), Ca(HCO3)2, and
KNO3. Predict which of these compounds will 13. Farmers sometimes add calcium hydroxide to
produce a solution with a pH soil to increase its pH.
(a) less than 7. (a) Why does calcium hydroxide raise soil pH?
(b) greater than 7. (b) Calcium hydroxide dissolves very slowly
(c) equal to 7. (7.2, 7.3) K/U
T /I
in water. Is this property an advantage or
6. Drinking water standards in Canada require that a disadvantage for a soil additive? Explain.
the pH of drinking water be between 6.5 and (7.3) K/U A
8.5. Name a household substance that could, if 14. Summarize your understanding of acids and
incorrectly discarded, bases in a table or graphic organizer. (Your
(a) lower the pH of water leaving your home graphic organizer might look something like
(b) increase the pH of water leaving your home Figure 1.) Include the following terms: synthesis;
(7.3, 7.4)
K/U A properties; neutralization; indicator; uses;
7. (a) How does acid precipitation affect aquatic pH; typical ion; environmental impact; metal;
life in a lake? (7.3, 7.4) non-metal. (7.1–7.8) K/U
(b) How can the addition of lime help renew

lakes that have been affected by acid
precipitation? (7.3, 7.8) A
Figure 1
Solve a Problem 18. What information must be on the labels of
15. Phenol red is an acid– chemical containers? (5.3) K/U T/I
base indicator that is

commonly used to test
Create and Evaluate
the pH of swimming 19. Some parents let their infants go to sleep with a
pools. (7.3–7.5) K/U T /I
bottle of apple juice. Discuss, with reasons, whether
this is a good or a bad idea. (7.2) C A
(a) What is the pH of
the water in Figure 2? 20. (a) Design an acid spill kit or a base spill kit for
(b) Swimming pools home use. Include in your plans
should have a pH • the names and active ingredients of the
between 7.2 and 7.6. substances to be included
Figure 2
What can the owner • any safety information that should appear on
of this pool do to adjust the pH to return it to the label of each product
within the ideal range? • instructions for using the kit
• a way of knowing when a spill has been
16. Three unlabelled bottles containing solutions neutralized
were found in the chemical storeroom. The labels
(b) Evaluate the usefulness of your kit. (7.5, 7.6) T/I
had fallen off the bottles and were found on the
shelf. The solutions contained hydrochloric acid, Reflect on Your Learning
sodium chloride, and sugar. A series of tests was
21. (a) Before you started this chapter, what did the
carried out to identify the chemicals (Table 1).
terms “acid” and “base” mean to you?
Identify the three solutions. (If necessary refer
to Table 3, Colours of Common Synthetic Acid– (b) How did your understanding of these terms
Base Indicators, in Section 7.2.) (7.1, 7.2) T/I
change as you worked through this chapter?
(c) What questions do you still have about acids
Table 1 Summary of Evidence from Tests on
Three Unknown Solutions and bases?
(d) Suggest two resources where you could
Colour with Reaction perhaps find answers to your questions.
bromothymol with Electrical
Solution blue magnesium conductivity 22. When hearing about accidents involving the
transportation or use of acids and bases, many
A blue to yellow bubbles high
people wonder, “Why don’t they ban the use of
B remains blue no reaction high these dangerous chemicals?”
C remains blue no reaction none (a) Was this your opinion before reading this
chapter? Explain.
17. An environmental chemist tested two different (b) Has your opinion changed as a result of
500 g soil samples, taken from different sites, reading this chapter? Explain.
to compare their buffering capacity. Two
identical volumes of acidic water were passed Web Connections
through the two soil samples and collected. The 23. Research and identify two examples of acids
chemist then slowly added a sodium hydroxide commonly found in skin care products. What are
solution to neutralize each sample of acidic these products used for? T/A A
water. Sample 1 required 5.2 mL and Sample 2

required 6.4 mL of basic solution to neutralize 24. Research the use of acids or bases in an
the acid. (7.5–7.8) K/U T /I industrial or environmental process. Assemble
your findings into a presentation of your
(a) Define “buffering capacity.”
choice.
T/A A C
(b) Why are different volumes of NaOH required?
(c) Which soil sample has the highest buffering To do an online self-quiz or for all
capacity? Give your reasoning. GO TO NELSON SCIENCE

CHAPTER
SELF-QUIZ
7
Communication A
Application
the sentence.
1. Which of the following is a property of acids?
(7.1, 7.2) K/U 8. The products of a neutralization reaction are an
(a) slippery feel ionic compound and ______. (7.5) K/U
(b) bitter taste 9. The ______ scale is a numerical scale ranging

(c) ability to conduct electricity from 0 to 14 that is used to compare the acidity
(d) ability to turn red litmus blue of solutions. (7.3) K/U
2. Substances that change color depending on

the acidity or basicity of a solution are called Match the term on the left with the appropriate description
(a) indicators. on the right.
(b) buffers. 10. (a) acid (i) produces hydroxide ions in
(c) electrolytes. solution
(d) antacids. (7.2) K/U (b) base (ii) is produced from
hydrogen and hydroxide
3. Which liquid in Table 1 is the most acidic? ions
(7.3) K/U
(c) ionic (iii) produces hydrogen ions
Table 1 The pH of Four Liquids compound in solution
Liquid pH (d) water (iv) also known as a salt
(a) milk 6 (7.2, 7.5) K/U
(d) lemon juice 2

(c) vinegar 3
11. Why are acids and bases considered to be
(d) ammonia 11
electrolytes? (7.2) K/U
4. What is the pH of a neutral solution? (7.3) K/U 12. Write the correct names and formulas of three
acids and three bases. (7.2) K/U
(a) 0
(b) 1 13. Complete and balance the following equations:
(c) 7 (7.3) K/U C
(d) 14 (a) HNO3 + KOH →

(b) Ca(OH)2 + H2SO4 →
Indicate whether each of the statements is TRUE or FALSE. If (c) H2SO4 + NaOH →
14. (a) Identify four uses of acids.
5. An oxyacid is an acid that contains only two
elements. (7.2) K/U
(b) Identify four uses of bases.
(7.2, 7.3, 7.5, 7.7) A
6. In an acidic solution, the hydrogen ion and

hydroxide ion concentrations are equal. 15. (a) What two ions typically combine when an
(7.3, 7.5) K/U
acid and a base react?
(b) What is the product of this reaction?
7. Acid−base neutralization reactions are single (c) What is this type of reaction called? (7.5) K/U
displacement reactions. (7.5) K/U

16. You test the pH of your backyard pool and find 20. (a) How could turning out the light when
that the pH is 8.2. (7.3, 7.5)
K/U A leaving a room reduce your contribution to
(a) Is the pool water acidic or basic? acid rain formation?
(b) At this pH, how is the water quality affected? (b) Name two other practices that could reduce
(c) How could you adjust the pH of your your contribution to acid rain formation.
swimming pool to be in the acceptable (7.8) A
range?
21. (a) Many soft drinks and fruit drinks have a pH
17. Your friend wants to determine whether a of less than 5. Why do dentists discourage
household product is an acid or a base. Write people from consuming too many of these
a note to your friend explaining how she could beverages?
accomplish this task. Include safety precautions. (b) What beverages could you substitute for soft
(7.1, 7.2) T/I C
drinks that would be less damaging? Explain
18. Where would you expect the pH of the most your answer. (7.3) T/I A
corrosive substances to lie on the pH scale? 22. (a) Give two environmental applications of
(7.3) T/I
neutralization reactions.
19. Write a paragraph describing neutralization (b) Give two consumer applications of
reactions. Include the following terms at least neutralization reactions. (7.5, 7.7, 7.8) A
once in the paragraph: acid, base, pH, hydrogen

23. Describe how you could use chalk and vinegar to
ion, hydroxide ion, neutralization, and neutral.
demonstrate the effect of acid rain on statues and
(7.2, 7.3, 7.5) C
buildings. (7.8) T/I

UNIT
LOOKING BACK
C
UNIT C
Chemical
Reactions


A substance’s Chemical reactions Acids are aqueous
chemical and involve the change solutions that
physical properties of one or more have characteristic
determine its substances into one properties.
usefulness and or more different
Bases are aqueous
effects. substances.
solutions that
Chemical reactions have characteristic
Changes can
obey the law of properties.
be classified
conservation of
as chemical or Acids and bases
mass and can be
physical. have a significant
represented by
impact—both
balanced chemical
We can classify good and bad—on
equations.
pure substances society and the
by observing their Chemical reactions environment.
properties. involving consumer
The acidity of
products can be
solutions is
Ionic compounds useful or harmful.
measured using the
are made up
We can use pH scale.
of positive and
patterns in chemical
negative ions. Acids and bases
properties to classify
react together
Molecular chemical reactions.
Ontario Science 10 SB in neutralization
compounds are
0-17-635528-6
Corrosion is the reactions.

FN C05-F40-UBOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 1st pass
made up of distinct
Approved
reaction of metals
Not Approved
Industrial and
molecules. with substances in
vehicle emissions
the environment.
Many consumer that cause acid
products are Chemical reactions precipitation can
developed from affect us and our be reduced by
petrochemicals. environment. technology.

MAKE A SUMMARY
antacids metal jewellery
disinfectant
(calcium carbonate) (nickel)
(hydrogen peroxide)
drain cleaner
(sodium hydroxide)
soft drinks
(carbonic acid)
lead acid battery

(sulfuric acid) galvanized nails table salt baking soda
(zinc oxide) (sodium chloride) (sodium hydrogen carbonate)
Figure 1
Figure 1 shows nine common products found in our homes. 4. Write the balanced chemical equation for at least one
An important ingredient in each product is named. Provide the chemical reaction involving this substance (either as a
following information for each named compound: reactant or product). K/U T/I
1. Write the chemical formula of the named ingredient. K/U 5. Identify at least one common use of the compound. A
2. Classify it as being either ionic or molecular. K/U 6. Identify at least one risk or benefi t related to this
3. Describe its most important physical and chemical compound. A
properties. K /U
0-17-635528-6
FN
CAREER LINKS UC-F01-UBOS10SB
Stephen Hutchings
C List the careers mentioned in this unit. Choose two of the careers that interest you, or choose two other
careers that relate to chemical reactions. For each of these careers, research the following information:
Pass• educational requirements (secondary and
1st pass • potential employers
post-secondary)
Approved • salary
• skill/personality/aptitude requirements
Not Approved • duties/responsibilities
Assemble the information you have discovered into a job application. Your application should
mention both careers, but should focus on the one you are applying for, giving your reasons.
In your application, explain how your chosen job relates to chemical reactions.

UNIT
UNIT TASK
C
Acid Shock: A Silent Killer SKILLS MENU
During a study of the wildlife in a local stream, Hypothesizing Observing
biologists began to notice a disturbing pattern Planning Evaluating
(Figure 1). Each spring, the population of young Controlling Variables Communicating
fish and amphibians plummeted and then recovered
(Figure 2). The population crash seemed to happen
soon after the first warm days in spring, when the
snow started to melt. Prediction
The biologists knew that falling snow collects air Predict the pH changes that occur, if any, as frozen
pollutants, so they began to suspect that air pollutants vinegar melts.
were being trapped and stored in the snow over winter.
The biologists wondered whether the melting snow Experimental Design
released its stored pollutants gradually or dumped You will freeze a sample of vinegar to simulate
a sudden dose of pollutants into the waterways. The frozen snow contaminated with acidic pollutants.
biologists wondered whether sulfur dioxide was the As the vinegar melts, you will collect at least five
culprit. It has all the right properties: it is soluble in fluid (meltwater) samples. You will measure the pH
water and forms an acid when it reacts with water. of these samples with a pH meter, recording the
Did the pH of meltwater from snow remain constantly dependent and independent variables.
acidic, they wondered, or could the first snow melt You will check that your observations are
contain a big dose of acid? Rather than wait for spring, reproducible.
the biologists designed a model to test their idea.
You will now take the role of one of the scientists on Equipment and Materials
the team. You will use the model they have designed,
• eye protection
along with the skills you have learned throughout this
unit, to test the “big dose of acid” idea. You will then • lab apron
use your findings and your understanding of chemical • 100 mL graduated cylinder
reactions to recommend ways to fix the problem. • plastic cup
• pH meter
Testable Question • hot water bath
Does the pH of fluid from a melting acidic mixture
• 6 small plastic vials or beakers
change over time?
• vinegar
• buffer solution (for calibrating the pH meter)
Figure 1 Environmental biologists track the populations of aquatic Figure 2 Leopard frogs, and their tadpoles, are one of the species
animals through the year. that the team is monitoring.

Procedure (f) The melting block of vinegar was a model of
SKILLS HANDBOOK
3.B.
1. Freeze 100 mL of vinegar in a plastic cup thawing snow contaminated with acidic pollutants.
overnight. Evaluate the strengths and limitations of the model.
How could the model be made more realistic?
2. Read the Experimental Design, the Equipment
and Materials list, and these procedural steps.
Write your own procedure for collecting and Apply and Extend
testing meltwater from the frozen sample. Your (g) Make recommendations to prevent the
procedure should include the following points: population crash of tadpoles in the spring.
Assume that it is not possible, in the short
• Calibrate the pH meter with buffer solution,
term, to eliminate pollutants at their source.
according to the manufacturer’s instructions
Include a discussion of the specific chemicals
(Figure 3).
you recommend and the chemical reactions
• Practise using the pH meter. they undergo. Justify your choices. Consider
• Examine the length of the electrode portion of the impact of your recommended chemicals on
the pH meter. Determine the minimum depth the environment. How could further unwanted
of fluid you will need to take a reading. environmental impacts be minimized?
A warm water bath can be used to speed up
the melting process.
Your completed Performance Task will be
assessed according to the following criteria:
✔ Understand the concepts of solutions and changes in state.
✔ Write balanced chemical equations for the chemical
reactions involved.
✔ Demonstrate an understanding of the pH scale and the
process of acid–base neutralization.
Figure 3 A pH meter can detect small changes in pH. ✔ Plan an investigation.
✔ Conduct fair test safely.
Analyze and Evaluate ✔ Record observations accurately and in an organized manner.
✔ Analyze the results.
(a) What are the controlled, dependent, and
✔ Evaluate the Experimental Design and skills.
independent variables in this investigation?
(b) Plot a graph of the pH changes occurring during Communication
✔ Prepare a suitable lab report that includes a complete
the experiment.
Procedure, summary of the observations, graph, any
(c) Answer the Testable Question. Justify your answer. necessary analysis, and an evaluation of the investigation.
(d) Compare your answer in (c) to your Prediction. ✔ Demonstrate an understanding of the language and
Comment on any differences. symbols used to represent chemical reactions.
(e) Evaluate the Experimental Design and your skill Application
at conducting the investigation. Are there any ✔ Use a model to represent an environmental challenge.
parts of the investigation that might cast some ✔ Demonstrate an understanding of how chemical reactions
doubt on your results? What improvements can be used to address an environmental challenge such
would you recommend? as acid precipitation.
NEL Unit C Task 301

UNIT
REVIEW
C
Communication A
Application
What Do You Remember? 7. Which of these observations is the best evidence

that a chemical reaction is taking place?
(5.1, 5.2) K/U
alternatives.
(a) An open flame appears.
1. Which of the following is evidence of a chemical
(b) A liquid changes to gas.
change occurring? (5.1) K/U
(c) An object changes volume.
(a) Energy is released or absorbed. (d) A solid disappears into a liquid.
(b) A precipitate forms.
8. What is the ending of the name of the
(c) A gas is produced.
compound with the formula Na2SO4? (5.9) K/U
(d) All of the above.
(a) -ane
2. Which of the following compounds has a name
(b) -ate
that ends in -ate? (5.9) K/U
(c) -ide
(a) NaNO3 (d) -ite
(b) KOH
9. Based on their locations in the periodic table,
(c) CaO
which combination of elements most often forms
(d) N2O
ionic compounds? (5.4–5.6) K/U
3. Which of the following is an ionic compound?

(a) an element from period 1 combined with an
(5.6) K/U
element from period 2
(a) NH3 (b) an element from period 1 combined with an
(b) PbSO4 element from period 7
(c) C6H12O6 (c) an element from group 1 combined with an
(d) OCl2 element from group 17
4. Which of the following compounds has a prefix (d) an element from group 17 combined with an
in its name? (5.7, 5.10) K/U element from group 18
(a) PbO2
(b) Ba(OH)2 Indicate whether each of the statements is TRUE or FALSE.
(c) P2O3 If you think the statement is false, rewrite it to make it true.
(d) Al2O3 10. An ionic bond will form between two elements
5. Which of the following causes rust? (6.10) K/U
that are non-metals. (5.6, 5.10) K/U
(a) water only 11. Non-metallic elements form anions, while

(b) oxygen only metallic elements form cations. (5.5) K/U
(c) water and oxygen

12. The element arsenic (atomic number 33) forms
(d) salt only
an anion with an ionic charge of +3. (5.5) K/U
6. WHMIS requires employers to provide safety

information through 13. Covalent bonds result from the transfer
of electrons from one element to another.
(a) product labels
(5.6, 5.10) K/U
(b) MSDS
(c) employee training
(d) all of the above (5.3) K/U

14. The law of conservation of mass states that the 27. Atoms gain, lose, or share electrons to get electron
total number of reactant molecules and total arrangements like their nearest .
number of product molecules in a chemical (5.5) K/U
reaction are equal. (6.3) K/U K/U
28. Scrubbing smokestack emissions is effective at

15. The reaction of hydrochloric acid and potassium removing emissions from smelting
hydroxide is an example of both a neutralization operations. (7.8) K/U
reaction and a double displacement reaction.

29. is the corrosion of iron. (6.10) K/U
(6.6, 7.5) K/U
30. A substance that changes colour in acids or bases

16. The products of the complete combustion of a
is called a(n) . (7.2) K/U
hydrocarbon are carbon monoxide and water.
(6.9) K/U
31. Acid leaching can be used to treat soils
contaminated with . (7.3) K/U
17. The reactants of a single displacement reaction
are both elements. (6.6) K/U 32. A change of state, such as melting, is a
___________ change. (5.1, 5.2) K/U
18. Dissolving sulfur dioxide gas in water produces

a basic solution. (7.8) K/U
33. A pure substance made up of molecules that
contain atoms of more than one element is called
19. Metals form positively-charged ions by gaining a __________. (5.10) K/U
electrons. (5.5) K/U

34. Atoms tend to form bonds to achieve electron
20. Atoms of carbon dioxide are held together by arrangements like those of Group _________
ionic bonds. (5.10) K/U elements. (5.5, 5.10) K/U
21. Sulfur dioxide gas released from some power 35. Acid–base indicators change colour because of
plants is one of the causes of acid precipitation. changes in the ____________ion concentration
(7.8) K/U
of a solution. (7.2) K/U
22. When magnesium chloride (MgCl2) is dissolves Write a short answer to each of these questions.
in water, it releases Mg+ and Cl2_ ions. (5.6) K/U
36. The compounds BaSO4 and KCl are the
23. When a hydrocarbon such as methane, CH4, products of a chemical reaction. Write a
burns where there is very little oxygen, one of balanced chemical equation for this reaction.
the products is carbon monoxide, CO. (6.9) K/U
(6.1–6.4) K/U T/I
37. Copper turns black and becomes heavier when

Copy each of the following statements into your notebook. Fill it reacts with oxygen in a Bunsen burner flame.
What type of chemical reaction is this? (6.5) K/U
the sentence.
24. A(n) change is one that involves 38. How does the addition of calcium oxide, CaO,
the formation of a new substance. (5.1) K/U
reduce the acidification of water? Use specific
chemical equations to support your answer.
25. The substances found on the right-hand side of a (7.5) K/U C
chemical equation are called .

(6.4) K/U
39. Describe how the periodic table can be used
to predict the ionic charges of the following
26. A(n) cannot be chemically elements:
broken down into simpler substances. (5.1) K/U
(a) Ca
(b) S
(c) K
(d) Al (5.4, 5.5) K/U
NEL Unit C Review 303

40. Which of the four basic types of reactions occurs 47. Classify the following chemical equations
as rust forms on iron? (6.5, 6.9) K/U as representing synthesis, decomposition,
single displacement, double displacement,
41. Write the chemical equation for the complete
or combustion reactions. (6.5, 6.6, 6.9) K/U
combustion of ethyne, C2H2, also known as

acetylene. (6.9) K/U C
(a) ammonia + sulfuric acid →
ammonium sulfate
(b) aluminum + copper(II) chloride →
What Do You Understand? aluminum chloride + copper
42. Use a Bohr–Rutherford diagram to explain why (c) phosphoric acid + sodium hydroxide →
the phosphide ion has an ionic charge water + sodium phosphate
of –3. (5.5) K/U
(d) aluminum sulfate →
aluminum oxide + sulfur trioxide
43. List three elements or ions that have the same (e) ethane (C2H6) + oxygen →
number of electrons as the sulfide ion, S2–. carbon dioxide + water
(5.5) K/U
48. Write a balanced chemical equation for each
44. Write the chemical formula for each of the word equation in question 32. (6.3–6.9) K/U C
following compounds. (5.6–5.10) K/U

49. The refining of iron ore into iron in a blast
(a) magnesium chloride furnace is an important industrial chemical
(b) aluminum sulfide process (Figure 1). During this reaction, carbon
(c) tin(II) sulfate reacts with iron(III) oxide to produce iron and
(d) iron(III) oxide carbon dioxide. (6.1, 6.3, 6.6)
K/U T/I
(e) lead(II) nitrate

(f) silver phosphate
(b) Write a balanced chemical equation for this
(g) sulfuric acid
reaction.
(h) hydrochloric acid
(c) Classify this reaction.
(i) chlorine dioxide
(j) dinitrogen monoxide
45. Name these compounds. (5.6–5.10) K/U
(a) K2O
(b) CuS
(c) Na3PO4
(d) Pb(OH)2
(e) HNO3(aq)
(f) CO
(g) NO
46. Describe how a balanced chemical equation is Figure 1 A blast furnace
like a “recipe” for the chemical reaction. (6.4) K/U

50. Carbon dioxide reacts with water to form a weak 56. The following chemical equation represents the
acid called carbonic acid. (7.3, 7.8) A combustion of propane in a sealed container:
(a) What effect is excess carbon dioxide in the C3H8(g) + 5 O2(g) → 3 CO2(g) + 4 H2O(g)
atmosphere likely to have on the pH of the Use the data in Table 1 to determine the mass of
world’s oceans? oxygen consumed in the reaction. (6.3, 6.9) T/I
(b) Why is this a concern for us?

Table 1
51. Draw Bohr–Rutherford diagrams of specific
Item Mass (g)
examples to explain why some atoms form
cations while others form anions. (5.5) K/U C container only 50.0
propane and container 61.8

52. Elements in the same group (column) of the
periodic table tend to have similar chemical carbon dioxide, water, and container 104.8
properties. Explain the reason for this pattern in
terms of the element’s electrons. (5.4, 5.5) K/U C
57. The following chemical equation describes the
chemical reaction that occurs when calcium metal
53. Write the names of the compounds represented
is added to an open test tube containing water:
by these formulas: (5.6–5.10) K/U C
(a) K2S Ca(s) + 2 H2O(l) → 2 H2(g) + Ca(OH)2(aq)

(b) CBr4 (5.1, 6.4, 7.2) T/I
(c) FeO (a) Explain the difference between the symbols

(d) CuSO4 (aq) and (l).
(e) AgNO3 (b) Predict what you would see in the test tube
(f) PbO2 as the reaction proceeds.
(g) N2O (c) How can you tell that the reaction is
54. Write a balanced chemical equation for the complete?
following word equation. (d) Predict how the mass of the contents of the
test tube changes as the reaction proceeds.
iron(III) chloride + tin(II) chloride _ iron(II)
Explain your prediction.
chloride + tin(IV) chloride (6.3, 6.6) C
(e) Predict what you would observe if a few

drops of phenolphthalein indicator are added
Solve a Problem to the test tube after the reaction is complete.
Explain your prediction.
55. A shiny, silver-coloured substance X is a good
conductor of electricity. The substance is 58. What can you and your family do immediately
burned in oxygen to produce a white solid. The and in the long-term to help reduce emissions
white solid is then added to water to produce a that cause acid precipitation? (7.8) A
solution with a pH of 10. (5.4, 5.7, 7.5) K/U T/I
(a) What type of substance is X? Give reasons

for your answer.
(b) If substance X acquires an ionic charge of +2
when it reacts, what is the likely chemical
formula of the white solid?
(c) Suggest a compound that can be used to
neutralize the solution so that it can be safely
disposed of.

59. An experiment was carried out in which sodium 64. Acid precipitation affects the health of Ontario’s
hydrogen carbonate (baking soda) reacted with forests. (7.8)A
an acetic acid solution (vinegar). The products (a) How does this affect you (directly or
are sodium acetate, water, and carbon dioxide indirectly)?
gas. The reaction is represented by the equation (b) Identify two sectors of the Ontario economy
NaHCO3 + CH3COOH → that feel the impact of this directly.
NaCH3COO + H2O + CO2 (c) What can you or your family do to help
reduce acid precipitation?
In the experiment, 42 g of NaHCO3 reacted
completely with 30 g of CH3COOH. Analysis of 65. Only vehicles with two or more occupants
the products showed that 41 g of NaCH3COO can use high-occupancy vehicle or HOV
and 9 g of H2O had been produced. The mass of lanes (Figure 2). Explain and evaluate the
the CO2 gas was unknown because it bubbled off environmental benefits of this practice. A
into the air. Calculate much CO2 was produced.

(6.3, 6.4)T/I
60. Element X forms a compound with magnesium

with the formula Mg3X2. What would be the
formula of the compound that element X forms
with hydrogen? (5.6, 5.7) T/I
Create and Evaluate

61. Since the 1960s, the number of cars on Canadian
roads has increased faster than the Canadian
population. (7.8) A
(a) How do you think this trend has affected

acid precipitation? Justify your speculation.
(b) Propose a plan of action that the planning Figure 2
committee of a new fast-growing town
66. A slowdown in the global economy will likely
should adopt to minimize the acid-causing
result in less demand for metals mined in Ontario.
emissions from cars in their town.
How might an economic slowdown impact acid
62. (a) Describe how you would design a new precipitation in Ontario? Why? (7.8) M1
community in order to minimize the vehicle

emissions that cause acid precipitation. 67. Two possible products of fossil fuel combustion
(b) How does the design of your community are carbon monoxide, CO, and carbon dioxide,
compare to the community where you CO2. For each of these products, describe
live now? (7.8) A (a) one way it is produced,
(b) one hazard it creates, and
63. “Tadpoles and snails are indicator species of the
(c) one way to reduce the amount that enters the
health of an ecosystem, just as bromothymol
atmosphere. (6.9) T/I
blue is an indicator of the acidity of a solution.”
Compare the uses of the word “indicator” in this
statement. (7.2) K /U

Reflect on Your Learning 72. Ontario generates about a quarter of its
electricity by burning coal. This process is a
68. How has your attitude toward the waste
significant source of acid emissions. Research
materials that you pour down the drain changed
Ontario’s plans to reduce or phase out coal-
after completing this unit? Which ideas
burning generating stations. Find out how
influenced you the most? Why?
this target date has changed over the last few
69. How have your ideas about air pollution changed years. Write a letter to your MPP to express
because of this unit? your opinion on the use of coal for electricity
generation. C A
Web Connections
70. Research and compare two related consumer
products or processes that involve chemical
reactions (e.g., teeth whitening procedures, types
of fuels). Evaluate the two products using a
rubric or rating scale of your own design. Make a
recommendation for the best product or process,
with your reasons. A T/A
71. Research and prepare a report describing two

opposing positions on a current environmental
issue involving chemicals. Choose one of the
sample issues below or another important issue
affecting your community.
• Are “green alternatives” as effective as
commercial household chemical products
(e.g., cleaners, polishes, disinfectants)?
• Are biofuels the solution to our future energy
needs?
• Is salt a better disinfectant for pools than
chlorine?
• Should the transport of oil by ship through the
Great Lakes be permitted?
One position must be from an environmental
point of view. The other position can be from one
or more different points of view, such as moral/
ethical, political, economic, social, or cultural.
Present your report in an innovative format
approved by your teacher. T/I C A


UNIT
SELF-QUIZ
C
Communication A
Application
1. Which of the following properties of a substance 7. Covalent bonds are formed by sharing electrons.
is a chemical property? (5.1) K/U (5.10) K/U
(a) density 8. The chemical equation shown below is balanced.

(b) flammability (6.3) K/U
(c) hardness
CH4 + 3 O2 → CO2 + 4 H2O
(d) solubility
2. Which of the following chemical formulas 9. Highly acidic solutions have low pH. (7.3)
represents a compound? (5.10) K/U
(a) CO Copy each of the following statements into your notebook.

(b) Na Fill in the blanks with a word or phrase that correctly
(c) P4 completes the sentence.
(d) Br2 10. The equation below represents a __________
3. In which of the following pairs do the atoms or reaction. (6.6) K/U
ions have the same total number of electrons? KCl + AgNO3 → KNO3 + AgCl
(5.5) K/U
11. Some coal-fired power plants release oxides of
(a) N and P sulfur and nitrogen into the atmosphere, which
(b) F− and O2− can lead to environmental damage in the form of
(c) Na and K+ __________ precipitation. (7.8) K/U
(d) Fe2+ and Fe3+

12. Complete the following word equation.nitric
4. The equation for the reaction of silver nitrate and
acid + potassium hydroxide →
copper is
water + ________________ (7.5) K/U
2 AgNO3 + Cu → 2 Ag + Cu(NO3)2
Which type of reaction is this? (6.6) K/U
Match the formula on the left with the chemical name on
(a) synthesis the right.
(b) decomposition 13. (a) FeCl3 (i) carbon tetrachloride
(c) single displacement (b) SnCl4 (ii) tin(IV) chloride
(d) double displacement (c) (NH4)3PO4 (iii) iron(III) chloride
5. What is the name of the compound with the (d) CCl4 (iv) carbon monoxide
formula H3PO4? (7.2) K/U (e) CO (v) ammonium phosphate
(a) phosphoric acid (5.7, 5.9, 5.10) K/U
(b) hydrophoric oxide

(c) hydrogen phosphate
(d) phosphorus hydroxide
6. What is the pH of pure water? (7.3) K/U
(a) 0
(b) 1
(c) 7
(d) 14

Write a short answer to each of these questions. 21. Hydrogen peroxide, H2O2, is an unstable
14. Write the chemical equation for the following compound that readily decomposes in light
word equation. to produce water and oxygen. Bottles of 3%
hydrogen peroxide are sold in pharmacies for
hydrochloric acid + potassium hydroxide → home use.
potassium chloride + water (6.3, 7.5) K/U C
(a) Why are hydrogen peroxide bottles dark
15. Describe some of distinguishing the brown rather that clear glass or plastic?
characteristics of elements in the following (b) Write a balanced equation for the
groups of the periodic table. (5.4) decomposition of hydrogen peroxide.
(a) Group 1 (alkali metals) (6.3, 6.5)K/U C A
(b) Group 2 (alkaline earth metals) 22. Consider the following household liquids:
(c) Group 18 (noble gases) K/U tap water, whole milk, lemon juice, and drain
16. Write the chemical formulas for the following cleaner.
compounds. (a) Predict which liquid would have the highest
(a) aluminum oxide concentration of hydrogen ions. Explain
(b) iron(II) chloride your prediction.
(c) ammonium sulfate (5.7, 5.9) K/U C
(b) Predict which liquid would have the highest
pH. Explain your prediction. (7.3, 7.4) A
17. (a) Describe two physical properties of the

element aluminum. 23. A janitor used ammonia cleaner (active
ingredient, NH4OH) to clean and disinfect
(b) Describe one chemical property of the
a school bathroom. He thought it would be
element aluminum. (5.4, 5.6, 6.10) A
best to neutralize the leftover ammonia before
18. An unknown element, X, combines with discarding it. The chemistry teacher told him
aluminum to form a compound with the he could use dilute hydrochloric acid and
empirical formula Al2X3. What would be the phenolphthalein. Describe the procedure the
most likely formula for the compound that janitor should use, including all necessary safety
element X forms with calcium, Ca? Explain your precautions. (7.2, 7.4, 7.5) T/I A
answer. (5.4–5.6) T/I
24. In this unit, you have learned that reactions take

19. An iron nail left exposed to the weather place all around you. You should now be able to
increased in mass slightly as it became coated look at some everyday chemical changes and see
with rust. Explain why this does not violate the them in a new way.
law of conservation of mass. (6.3, 6.5, 6.10) T/I
(a) Choose two common chemical changes and
20. When zinc, Zn, was added to sulphuric acid, explain how you understood them before
H2SO4, a gas bubbled out of the reaction mixture. you knew about chemical reactions.
Analysis of the reaction products showed that (b) Explain how you understand the same two
zinc sulphate had been produced. chemical changes now. (6.1–6.10) A
(a) What was the gas that bubbled off?

(b) Write a balanced equation for the reaction.
(6.3, 6.6) T/I
NEL Unit C Self-Quiz 309

D
UNIT
Climate Change
OVERALL
Expectations
analyze some of the effects
of climate change around
the world and assess the
effectiveness of initiatives
that attempt to address the
issues of climate change
investigate various natural
and human factors that
in uence Earth’s climate
and climate change
demonstrate an
understanding of natural and
human factors, including
the greenhouse effect, that
in uence Earth’s climate and
contribute to climate change
BIG Ideas
Earth’s climate is dynamic
and is the result of
interacting systems and
processes.
Global climate change is
in uenced by both natural
and human factors.
Climate change affects living
things and natural systems
in a variety of ways.
People have the
responsibility to assess
their impact on climate
change and to identify
effective courses of action
to reduce this impact.
310 Unit D • Climate Change NEL

Focus on STSE
WHO IS TO BL AME?
A group of students is meeting around a large conference table. This is the First
International Student Climate Change Congress. Students from around the world have
decided to meet by themselves, since they are the ones who will inherit the Earth. The
Canadian delegation is on edge because Canada’s production of greenhouse gases is
under discussion.
Per person, Canadians produce the most carbon dioxide
Americans used to be the largest per capita producers of carbon dioxide. However, the
additional carbon dioxide released by Canada’s forests because of the pine beetle has
now put Canadians in first place.
1. Do you think it is fair to single out Canadians as the biggest producers of CO2? C A
2. List reasons why you think Canadians are ranked as the top consumers of
fossil fuels. T/I C
Per person, Canadians are one of the top ten producers of greenhouse gases
Countries that produce a lot of petroleum and natural gas emit huge amounts of
methane as well as carbon dioxide. Small amounts of methane have the same effect as
larger amounts of carbon dioxide. Many oil-producing countries with tiny populations,
such as Kuwait and Brunei, produce more greenhouse gases per person than Canada.
3. If you came from Kuwait, how would you defend your production of greenhouse
gases? A T/I
Canada as a country is the eighth largest producer of carbon dioxide
China produces the most carbon dioxide at 22 % of the world’s total. The United States
is second at 20 %. Canada produces about 2 %.
4. If you came from China, how would you defend your production of greenhouse
gases? T/I A
We are all in it together
After a heated discussion, the student leaders realize that they will inherit the world together.
It will not help to blame any one country. We all share the same atmosphere.
5. Do you agree? Or should it be up to just a few countries to solve the problem? C A

UNIT
LOOKING AHEAD
D
UNIT D
C
Climate Change

System and Out of Balance Responding to
Natural Changes Climate Change
What factors cause the two different The Angel Glacier in Jasper National The construction of wind farms is one
climates visible in this photograph? Park has retreated since 1939. possible response to climate change.
UNIT TASK Preview
Global Climate Change

The Intergovernmental Panel on Climate Change (IPCC) is recommendations for international changes that can be made
preparing to update its report on global climate change. You to limit the extent of climate change.
are part of a task force requested by the IPCC to examine
international impacts of climate change.
UNIT TASK Bookmark
In this task, you will select a location somewhere in the
world and learn about its climate. You will collect data on the The Unit Task is described in detail on page 444. As you
present climate and on the climate from about 50 years ago. work through the unit, look for this bookmark and see how
You will then compare the two sets of data to identify any past the section relates to the Unit Task.
changes in climate.
You will use these conclusions, along with information from
this unit, to predict what climate-related changes may be ASSESSMENT
happening now. You will also predict what will happen over You will be assessed on how well you
the next 100 years. Next, you will conduct further research on
• research and analyze your data
the impacts of climate change in your location to see if your
prediction agrees with that of climate experts. • present your current and predicted climate-related
changes
Finally, you will compose a list of practical recommendations
• make local and global recommendations on how to
on what people in that region can do to prepare for the limit and prepare for climate change
impacts of climate change. You will also compose a list of

PREREQUISITES
Concepts Skills
• Radiation from the Sun • Graphing data and analyzing graphs
• Greenhouse gases and the greenhouse • Researching and collecting information
effect • Planning and conducting experiments
• Effects of human activities on the • Communicating scientific information
environment appropriately
1. (a) Where do we obtain most of the energy we use to power 4. Describe and explain, as if to a younger student, what is
our technologies? happening in Figure 2. K/U C
(b) What are the risks and benefits of using this energy
source?
(c) What other sources of energy are available? K/U
2. Water can occur in three different states. All three states of

water are found naturally on Earth. K/U
(a) List the three states of water.
(b) Give a natural example of water in each state.
3. Explain how the climate of each region in Figure 1 is affected
by its location. K/U C
Figure 2
5. List at least 10 ways in which human activities affect the

environment. A
6. Draw a concept map similar to Figure 3 that includes the
terms listed below. Draw lines to connect all the terms that
you think may be related to each other. Write words or
expressions on the lines to explain the relationships. K/U C
climate humans atmosphere
(a) Sun Earth greenhouse gases
Figure 3
(b) 7. (a) Is all the information you find on the Internet reliable?
(b) What do you look for on a website to be sure the site is
Figure 1 (a) Tobermory is beside a large lake. (b) Vancouver
Island is on the coast and has a warm ocean current nearby. unbiased and accurate? T/I C

CHAPTER
8 Earth’s Climate System

and Natural Change
KEY QUESTION: How does Earth’s climate system

keep Earth’s temperature in balance, and what
natural events cause changes in Earth’s climate?
What factors cause the two different

climates visible in this photograph?
314 Chapter 8 • Earth’s Climate System and Natural Change NEL

UNIT D
Climate Change

KEY CONCEPTS
Earth’s climate system is Earth’s climate system The greenhouse effect

powered by the Sun. includes the atmosphere, keeps Earth warm by
the hydrosphere, the trapping thermal energy
lithosphere, and living radiated by Earth.
things.
Thermal energy is Earth’s climate Scientists use natural ice

transferred within Earth’s experiences long-term and cores, sediment layers,
climate system through short-term changes. fossils, and tree rings to
air and ocean currents. study past climates.

ENGAGE IN
SCIENCE
This summer, Manuel Ramirez of Cardston, Alberta, Alberta’s climate was very different 10 000 years
made an exciting discovery. While scrambling up ago. Some species from that time, such as woolly
the slope of a hill, 15-year old Manuel noticed a dull mammoths, are now extinct. Others, such as
brown object sticking out of the side of the hill. On caribou, still exist in Alberta today.
taking a closer look, he saw that it looked like an “I thought elephants lived in warm climates
enormous bone. like in India and Africa,” said Manuel. “But the
Manuel went back the next day, taking a small paleontologists told me that it’s not an elephant—it’s a
shovel with him. He carefully dug away the soil to woolly mammoth. Mammoths existed more than
reveal more bones embedded in the ground. Manuel 10 000 years ago. They lived in very cold climates
notified the museum in Calgary of his discovery. where much of the ground was covered in permanent
Paleontologists from the museum worked with ice. On the Internet, I’ve seen pictures of a baby
Manuel to uncover the rest of the bones. The mammoth that was found frozen in the ice.”
scientists took the bones back to the museum, where “I still have some questions,” says Manuel. “Alberta
they washed and assembled them. The final skeleton doesn’t have an icy climate, so why did mammoths
looks like an enormous elephant. live here? How has Alberta’s climate changed?”
1. From the information in the article, how

has Alberta’s climate changed?
2. What evidence is there that Ontario’s
climate has changed over time?

WHAT DO YOU
THINK?
1 About half the energy on Earth comes from the Sun.

Agree/disagree?
4 Earth’s climate has remained stable for several thousands
of years.
Agree/disagree?
2 The greenhouse effect is a natural phenomenon.

Agree/disagree?
5 Volcanic eruptions cause the climate to change.
Agree/disagree?
3 Carbon
system.
dioxide is an important part of Earth’s climate
6 Weather and climate are the same thing.
Agree/disagree?
Agree/disagree?

FOCUS ON
READING
Finding the Main Idea
When you look for the main idea of a text, you identify a general topic
(climate change) and a related key concept (humans add to the greenhouse
effect). Details are usually given to support the main idea (fossil fuels,
unsustainable farming). Use the following strategies to find the main idea:
• use clues in the title and the headings
• check the first, second, and last sentences
READING TIP • look for repeated words and bolded words
As you work through the chapter, • look for signal words (therefore, consequently, for this reason)
• change the heading or main idea into a question to see if other
sentences explain it
• make a concept map to help separate details from the main idea
Components of Earth’s Climate System

Would it be possible to live on another planet? Mercury has no
atmosphere. During the day, Mercury’s temperature is scorching hot at
450 °C, and at night, it drops to a freezing –170 °C. Venus’s atmosphere
is 100 times more dense than Earth’s, and its surface temperature is over
700 °C. In contrast, Mars has an atmosphere 100 times less dense than
that of Earth, and its average surface temperature is −63 °C. In fact,
Earth may be the only planet in our solar system that can support life as
we know it.
Finding the Main Idea in Action

A main idea narrows a topic to a specific point or opinion. Details in the
text support the main idea by explaining it with facts or examples. Here is
how one student found the main idea in the paragraph above.
Strategy Information in the Text
Read the heading I predicted that the text would be about the Earth’s climate.
Reread the first sentence The first sentence was a question: “Would it be possible
to live on other planets?” This narrowed the topic down.
Looked for repeated words The word atmosphere and temperature were repeated.
Looked for examples and The examples told me why other planets were not suitable
facts for life as we know it.
Reread the last sentence The last sentence answered the question: “Would it be
possible to live on other planets?”
Main Idea: The atmosphere and temperature of planets, other than Earth, are not able to
support life as we know it.
318 Chapter 8 • Earth’s Climate System and Natural Changes NEL

Weather and Climate 8.1
Is today a warm, sunny day or is it cold and rainy? When you describe the
conditions outside on a particular day, you are describing the weather. weather atmospheric conditions,
Describe today’s weather to a classmate, using as much detail as you including temperature, precipitation, wind,
and humidity, in a particular location over
can. Include the temperature and precipitation (if present). What other
a short period of time, such as a day or
conditions can you describe? a week
Describing the Weather

Scientists who study the weather are called meteorologists. Meteorologists
LEARNING TIP
usually provide the following information when they describe the weather:
Humidity and Temperature
• temperature Water vapour (the gaseous state
• type and amount of precipitation of water) forms when liquid
water evaporates. When water
• wind speed
evaporates, the vapour mixes with
• relative humidity (the amount of water vapour in the air relative to the air. Warm air can hold more water
maximum amount of water that it is possible for the air to hold at that vapour than cold air. This is why
temperature) warm air is often more humid
• atmospheric pressure (the force exerted on a surface by the weight of the than cold air.
air above it)
• presence of fog, mist, or cloud cover
A typical description of the weather on a summer day might be like this: To learn more about the work of
a high of 28 °C today, sunny with cloudy periods, probability of precipitation a meteorologist,
30 %, wind from the west at 20 km/h, and relative humidity of 40 %. GO TO NELSON SCIENCE
In some parts of the world, the weather stays more or less the same from
day to day. For example, the Sahara desert in Africa is usually hot and dry
during the day. In Canada, however, the weather can change dramatically
from one day to the next (Figure 1). The weather may be warm and sunny
today, but it could become cool and rainy tomorrow. However, you would
not expect snow in Ontario in August or a temperature of 30 °C in Nova
Scotia in February.
Figure 1 The weather in an area can

change dramatically in a matter of
hours.

Predicting the Weather
We often want to know what the weather will be like this afternoon,
tomorrow, or on the weekend. Meteorologists gather information on
weather around the world and use this information to forecast the weather
for specific areas. Environment Canada maintains thousands of weather
stations across the country. In some parts of the world, weather information
To see weather predictions in
has been collected and recorded daily since the 1800s. Methods of collecting
your region, weather data include weather stations, weather balloons, aircraft, and
GO TO NELSON SCIENCE satellites (Figure 2).
DID YOU KNOW?

Earth’s Tilt Causes Seasons
Earth is presently tilted at 23.5°.
Because of the tilt, during part of
Earth’s orbit the northern hemisphere
is tilted away from the Sun (winter),
and during another part it is tilted
toward the Sun (summer). This tilt
accounts for our distinct summer and
Figure 2 This automatic weather station is located on Alexander Island, Antarctica. It records the
winter seasons.
daily temperature, precipitation, wind speed and direction, and humidity.
What causes weather? Interactions between water and air on Earth and
energy from the Sun contribute to our weather. Energy originating from the
Sun heats Earth’s atmosphere, creating winds and other air movement. Water
in oceans, lakes, and rivers evaporates, cools, and condenses. This process
forms clouds that can produce rain or snow. Ocean water moves in currents
from the poles to the equator and back again. Together, air movement and
water movement create weather.
What Is Climate?
climate the average of the weather in a
Climate is the usual pattern of weather in a region over a long period of
region over a long period of time
time. To determine the climate of a region, climatologists collect weather
To find out more about the differences measurements made over 30 years or more and average the results. Scientists
between these groups of scientists, who study climate include climatologists, paleoclimatologists, atmospheric
GO TO NELSON SCIENCE scientists, and climate modellers.
The climate of a region gives a range of temperatures that you might expect
at a certain time of year. It also tells you whether to expect rain, snow, or high
winds in certain seasons. For example, the climate in southern Ontario is
warm and humid during the summer and cold with snow during the winter.
What is the difference between weather and climate? Weather describes the
atmospheric conditions over a short period of time—an hour, a day, or even a
week. Climate describes the typical weather you can expect in a region based
on weather data gathered over many years. As the science fiction author Robert
Heinlein wrote, “Climate is what you expect, but weather is what you get.”

The climate of a region determines the types of plants and animals that live
there. Animals, such as polar bears and seals, which live in the Arctic, must
be able to survive the cold, dark winters (Figure 3). The few plants that live in
the Arctic grow only during the summer months. In contrast, the climate of
southern Ontario encourages the lush growth of a variety of trees, bushes, and
other plants. Many insects, birds, and mammals live in central and southern
Ontario forests.
FPO
C08-P10b
please supply
revised photo per
AA request
(a) (b)
Figure 3 (a) Polar bears have thick layers of fat under their fur to help them survive the winters.
(b) Many plant and animal species, such as the red fox, live in Ontario forests.
IN SUMMARY
• Weather is a description of the atmospheric • Climate is the average weather in a region over a
conditions, including temperature, precipitation, long period of time, usually 30 years.
wind, and humidity, in a particular location over • The climate of a region determines the types of
a short period of time. plants and animals that live there.
CHECK YOUR LEARNING

1. Classify the following as either a weather observation for 7. Suppose that accurate weather forecasts could be extended
a specific location and day or an aspect of a location’s from five days to seven days, but a government investment
climate. Explain each choice with a short sentence. K/U of $10 billion over 10 years would be necessary. Would this
(a) temperature highs and lows be a worthwhile investment? Create a chart that lists the
(b) precipitation pros and cons from the point of view of a ski hill operator,
(c) hours of sunshine municipal works department, and private citizens who will
(d) wind speed pay the additional taxes as well as enjoy the additional
benefits. T/I A C
(e) humidity
8. Two students were discussing the difference between
2. List three different technologies that a meteorologist might weather and climate. Sandeep said, “Since Ottawa’s climate
use to collect weather data. K/U is characterized by a cold winter, and we’re moving into
3. (a) What factors should you include in a description of November, the weather next week is definitely going to be
weather? colder than it was this week.” Rodrigo replied, “I would
(b) Describe today’s weather in your area using as much agree with you if you changed the word ‘week’ to ‘month.’”
detail as you can. K/U T/I Do you agree with Rodrigo or with Sandeep? Explain in
terms of weather and climate. Be prepared to share your
4. What is the difference between weather and climate? K/U
answer with the class. K/U C
5. Describe the climate where you live. K/U 9. Suppose you were marooned on an island. You started
6. How does a region’s climate determine its plant and animal collecting weather data so that you could come to a
life? Explain. K/U conclusion about the climate of the island. How long would
you need to keep weather records before you could make a
definite conclusion about the climate? T/I
8.2 Classifying Climate
The climate in your region affects the way you live. For example, houses
in hot climates are often built on one level, with white walls and inner
courtyards (Figure 1(a)). These features help keep the houses cool. Houses
in colder climates are often smaller. They may have basements or more than
one level and steep roofs to prevent snow from accumulating. These features
make the houses easier to heat in the winter (Figure 1(b)). The climate also
determines what you wear and what activities you do outside. How would
your life be different if you lived in a different climate?
(a) (b)
Figure 1 (a) Houses in hot climates are usually designed to stay cool. (b) Houses in colder climates
are designed to stay warm during the winter.
Climate Zones
In the early 1900s, a scientist named Vladimir Köppen (1846–1940) used
temperature, precipitation, and plant communities to identify climate zones.
As you might expect, polar regions such as the Arctic and Antarctic are placed
in the same climate zone. Northern Canada’s cold spruce forests are classified
with Russia’s similar forest regions. Köppen’s system has been revised since
then, but current systems are similar to Köppen’s original zones.
Figure 2 shows a map of Earth’s main climate zones. In which climate
zone do you live? Can you find another country containing the same
climate zone?
Tropical Dry Arctic Circle

Tropical wet Semiarid
Tropical dry Arid
Moderate Continental Tropic of Cance

r
Marine Warm
west coast summer
Equator
Mediterranean Cool
Humid summer
subtropical Subarctic corn
Tropic of Capri
Polar
Tundra
Ice
ircle
Highlands Antarctic C
0 1500 3000 km
Figure 2 World climate zones

Ecoregions
Over the last 30 years, people have become more concerned about the
survival of ecosystems. A new method of classifying climate has been
developed to reflect this concern. New climate zones, which focus on the
ecology of the region, are called ecoregions.
To access the Terrestrial Ecoregions
Ecoregions are based on landforms, soil, plants, and animals, as well as of the World map and examine any
climate. They also consider human factors such as crops and urban centres. ecoregion in detail,
Figure 3 shows 867 distinct land-based ecoregions around the globe. GO TO NELSON SCIENCE
Arctic Circle
Ontario Ecoregions
Western Great Lakes forest
Tropic of Cancer Midwestern Canadian Shield
forests
Southern Hudson Bay taiga
Equator
Central Canadian Shield forests
Eastern forest-boreal transition
orn
Tropic of Capric Eastern Great Lakes lowland
forest
Southern Great Lakes forests
ircle
Antarctic C
Figure 3 Terrestrial ecoregions of the
0 1500 3000 km
world. Which ecoregion do you live in?
Canada recently developed its own system for mapping ecoregions. In

LEARNING TIP
Canada’s system, major ecozones are divided into smaller ecoregions. For
Ecoregion Versus Ecozone?
example, the community of Timmins is in the Abitibi Plains ecoregion,
The global ecoregion classification
which is within the larger Boreal Shield ecozone. Remember, Canada’s
is equivalent to Canada’s ecozone
ecozones are similar to global ecoregions. C08-F34-UCOS10SB.ai
classification. In the Canadian
system, an ecozone is divided
Bioclimate Profiles The legend has been positioned to fit in the margin of the page layout.
into smaller ecoregions. For
An ecoregion describes the climate and ecosystem of a region in its current state. example, the boreal ecozone
A bioclimate profile is a series of graphs that show temperature and moisture contains 30 ecoregions. In the
conditions at a given location. An important difference between ecoregions international system, the boreal
and bioclimate profiles is that bioclimate profiles only describe climate. Also, forest is considered an ecoregion.
Remember: Canadian Ecozone =
bioclimate profiles display the location’s projected climate 40 to 80 years into the
Global Ecoregion.
future. Over 500 sites in Canada are described by bioclimatic profiles.
bioclimate profile a graphical
Factors Affecting Climate
0-17-635528-6 representation of current and future
FNWhy do climate C08-F34-UCOS10SB
zones exist? The climate in a region is caused by a variety of climate data from a specific location
Crowle
COfactor. These factors Art Group
include: To learn more about bioclimate
Deborah Crowle profiles,
• the distance from the equator (latitude)
Pass 4th pass GO TO NELSON SCIENCE
• the presence of large bodies of water
Approved
• the presence of ocean or air currents
Not Approved
• land formations
• the height above sea level (altitude).
As you read the rest of this chapter, you will revisit each of these factors to
see how they affect climate.
NEL 8.2 Classifying Climate 323

RESEARCH THIS CLASSIFY YOUR CLIMATE
SKILLS: Researching, Evaluating SKILLS HANDBOOK
4.A., 8.B.
1. Research the Canadian ecozone and ecoregion that you live A. Record the details of the two Canadian ecoregions you
in. Research another Canadian ecozone and ecoregion that researched. K/U T/I
is very different from the one you live in. B. Use a graphic organizer such as a Venn diagram or a
2. Research (a) another country with an ecoregion similar to the compare and contrast chart to organize and display
Canadian ecozone you live in and (b) another country with an similarities and differences in the climate of the two
ecoregion that is different from the Canadian ecozone where Canadian locations. C
you live. C. Which country with a similar ecoregion did you research?
3. Examine the Bioclimate Profiles website. Find a weather Describe how it is like your ecozone. T/I
station close to your home and compare the maximum D. Which country with a different ecoregion did you research?
April to October temperatures for 1971–2000 with the Describe how it differs from your ecozone. T/I
maximum temperatures projected for the same months
E. What does the bioclimate profile tell you about the climate
in 2070–2099.
where you live? How is this different from the description
of an ecoregion? A
UNIT TASK Bookmark

You can apply what you learned in this section about climate zones and bioclimate profiles
to the Unit Task described on page 444.
IN SUMMARY
• Traditional climate zones are usually classified based • Bioclimate profiles display observed climate data
on temperature, precipitation, and vegetation. and allow us to compare a region’s current climate
• Ecoregions and ecozones classify climate regions variables with those projected 40 to 80 years into
based on a region’s landforms, soil, vegetation, and the future.
human factors, in addition to temperature and
precipitation variables.
CHECK YOUR LEARNING

1. (a) What three factors did Köppen take into account in 3. Find another country far away that has climate zones
his climate classification system? similar to those in Canada. Predict the kind of global
(b) What additional factors do we take into account ecoregion this country might have. Use the Web to find out
when we classify climate into ecoregions? K/U if your hypothesis is accurate. K/U T/I
2. The average daily maximum temperature in central 4. Ontario has three ecozones, the largest of which is the
Egypt reaches 40 °C in the summer. There is very little Boreal Shield. The Boreal Shield subdivides into many
rain—less than 10 mm per year. The lack of rain smaller ecoregions. How many ecoregions in Ontario
means that there is little vegetation in this part of the belong to the Boreal Shield? K/U
country. K/U 5. Bioclimate profiles are restricted to traditional climate
(a) In what climate zone does central Egypt belong? variables such as temperature and precipitation. Why are
(b) Is there any part of North America that belongs in they more useful than ecoregion descriptions for studying
the same climate zone? the future of Ontario’s climate? T/I

The Sun Powers Earth’s Climate System 8.3
So far, you have learned about climate zones around the world. To
understand Earth’s climate, you need to look at the bigger picture. Earth
has a global climate system, which includes air, land, liquid water, ice, and climate system the complex set of
living things. The climate system is powered by the Sun (Figure 1). The components that interact with each other
to produce Earth’s climate
interactions between these components and the Sun produce climate zones.
In this section, you will learn about the energy Earth receives from the Sun
and what happens to this energy on Earth.
Figure 1 The Sun powers the climate system.
The Balance of Energy on Earth

Almost all energy on Earth comes from the Sun. The Sun emits a
number of different types of radiation (Figure 2). The types of radiation ultraviolet radiation a form of invisible
higher-energy radiation
include ultraviolet radiation (invisible short wavelength, higher-energy
radiation), visible light, and infrared radiation (invisible long wavelength, infrared radiation a form of invisible
lower-energy radiation). lower-energy radiation
Ultraviolet Visible Infrared

(short wave- (long wavelength, low energy)
length, high
energy)
Energy output
Wavelength
Figure 2 The Sun’s electromagnetic spectrum at the top of the atmosphere
NEL 8.3 The Sun Powers Earth’s Climate System 325

Earth Absorbs Energy from the Sun
When radiation contacts a particle of matter, one of three things happens.
1. The radiation may be absorbed by the particle, causing the particle to
READING TIP gain energy.
Finding the Main Idea 2. The radiation may be transmitted through the particle.
The first place to look for the main
idea is the first two sentences of a 3. The radiation may be reflected off the particle.
paragraph. The first sentence of a What happens to radiation from the Sun once it reaches Earth? About
paragraph is called the topic sentence
30 % of the energy is reflected back to space by clouds, particles in the
and this is where the main idea usually
is stated. Sometimes the first sentence
atmosphere, and Earth’s surface (Figure 3). The remaining 70 % is absorbed
gives an introduction to the topic, so by Earth’s surface, clouds, and certain gases in the atmosphere. This accounts
check the second sentence to see if it for 100 % of the incoming radiation from the Sun.
states the main idea.
reflected by reflected by reflected from

atmosphere 6 % clouds 20 % Earth’s surface 4 %
incoming
solar energy
100 %
absorbed by atmosphere
and clouds 19 %
absorbed by land
and oceans 51 %
Adapted from original material from NASA, available through the Atmospheric Science Data Center
Figure 3 Incoming energy from the Sun is reflected (30 %) and absorbed (70 %) by Earth’s surface,
clouds, and the atmosphere.
What happens to the energy absorbed by Earth’s surface? Plants trap a

small proportion of the energy (<1 %) and use it to power the process of
photosynthesis. Rocks and water absorb the Sun’s energy, causing them to
heat up. As Earth’s surface temperature increases, it heats the air above.
How Does Earth Maintain a Balance?

Your home probably has a thermostat to control the indoor temperature.
A thermostat switches off the heating system once your home has reached
a set temperature. What would happen to the temperature in your home if
the thermostat broke and the heating system continued to heat the house?

Earth is constantly absorbing energy from the Sun because the Sun has no
“off ” switch or thermostat. In the next Try This activity, you will construct a
simple model to help answer this question: If the Sun continuously shines on
Earth, why does Earth’s average temperature remain relatively constant?
Earth’s Surface Emits Energy

Energy can be converted from one form to another. Earth’s surface
absorbs energy from the Sun at different wavelengths (ultraviolet, visible
light, and infrared). As this energy is absorbed, Earth’s surface gains
thermal energy and its temperature rises. Earth’s warm surface then thermal energy the energy present
emits mostly lower-energy infrared radiation back out. In the following in the motion of particles at a particular
temperature
Try This activity, you will feel the radiation resulting from this increased
thermal energy.
T RY THIS TESTING A MODEL OF THE EARTH−SUN ENERGY SYSTEM

SKILLS HANDBOOK
SKILLS: Questioning, Hypothesizing, Predicting, Controlling Variables, Performing, Observing, Analyzing 3.B., 6.A.
Equipment and Materials: desk lamp with 60 W incandescent 2. Record the initial temperature.
bulb; paper or plastic plate; gravel; thermometer; white paper; 3. Bend the lamp so that the bulb is approximately 10 cm above
ruler the stones. Measure and record the exact distance.
Do not touch the light bulb, even after it has been turned 4. Put white paper over the exposed part of the thermometer
off. It could cause a burn. to block it from the light. (You will remove the paper to take
Do not unplug the desk lamp by pulling on the cord. Pull readings.) Turn on the lamp. Record the temperature every
the plug out. 10 min for 60 min.
1. Prepare a model of Earth’s surface by placing a layer of 5. After 60 min, turn off the lamp. Place your hand over the
gravel on the plate. Put the thermometer bulb under the gravel. Record your observations.
layer of stones so that the light from the lamp will not shine 6. Plot a graph of temperature versus time. C
directly onto the thermometer (Figure 4). A. Did the temperature of model Earth rise without stopping
when the lamp was on? T/I
B. (i) What did you notice when you put your hand over the stones
after the lamp was turned off? Try to explain what you felt.
(ii) Do you think this was happening when the lamp was
still on? T/I
C. Predict what you would feel if you placed your hand over
the stones 30 min after the lamp has been turned off. T/I
D. Use your answers to questions A, B, and C to write a
general statement about what happens as the Sun’s light
continuously shines on Earth. C
E. Predict what would happen if you used an equal mass of
water instead of stones in this experiment. T/I
F. What were the limitations of this model in terms of
Figure 4 Earth, the Sun, and the transfer of thermal energy? T/I
Now you can see that Figure 3 does not show the whole picture. Earth’s
surface both absorbs energy and emits energy.

Figure 5 shows both incoming energy (yellow arrows) and outgoing
energy (red arrows). The amount of energy radiated by Earth’s system is
equal to the amount of energy Earth’s system absorbs from the Sun. The
amounts of energy balance. As a result of this balance of energy, Earth’s
global temperature stays fairly constant.
MATH TIP
Percentages outgoing lower-energy
outgoing solar radiation 30 % infrared radiation 70 %
All the different types of energy
reflected or radiated must add up to reflected by reflected reflected from radiated to space from
radiated
100% of the incoming solar energy. atmosphere by clouds Earth’s surface clouds, atmosphere, directly
6% 20 % 4% and indirectly from Earth to space
64 % from Earth
incoming 6%
solar energy
100 %
absorbed by 64 %
atmosphere
and clouds 19 %
45 %
absorbed by land
and oceans 51 %
Figure 5 The energy absorbed by Earth

Adapted from original material from NASA, available through the Atmospheric Science Data Center
(yellow arrows) is equal to the energy
radiated by Earth (red arrows). As a
energy absorbed by energy radiated back again
result of this balance of energy, Earth’s
Earth and atmosphere = by Earth and atmosphere
global temperature stays fairly constant.
Latitude and Climate Zones

In Section 8.2, you learned about climate zones on Earth. Which country
would you expect to have a warmer climate: Nigeria, located near the
equator, or Greenland, located near the North Pole? You probably chose
Nigeria, and you are correct. The climate is warmer at lower latitudes
and colder at higher latitudes near the North and South Poles (Figure 6).
Latitude is a measure of distance from the equator. For example, Nigeria has
a lower latitude than Greenland because it is closer to the equator.
Why is the climate colder at higher latitudes? Near the equator, the Sun
shines directly overhead. There, the energy from the Sun is spread over a
small area and feels very strong. Closer to the North and South Poles, the
Figure 6 Because Nigeria is close to Sun is not directly overhead. As a result, the Sun’s energy is spread over a
Earth’s equator, it has a hot climate. larger area and feels weaker (Figure 7).

energy North
from energy from the Sun
Pole
the Sun
ator ator
equ equ
(a) (b) South Pole
Figure 7 (a) The energy from the Sun is more intense near Earth’s equator since it hits
Earth’s surface directly. (b) Energy from the Sun is less intense near the two poles since
energy hits Earth’s surface at an angle and spreads over a larger area.
There is another reason why climate changes with latitude. From

Figure 7 you can see that radiation from the Sun hits higher latitudes at an
angle. Because of this, the Sun’s radiation must pass through more of the
atmosphere before it strikes Earth’s surface (Figure 8). Thus, at high latitudes
more radiation is absorbed and reflected by the atmosphere, so less reaches Figure 8 The Arctic is cold because
energy received by Earth at high
the ground. At lower latitudes, the Sun shines directly on Earth’s surface.
latitudes is spread over a larger area
Radiation from the Sun passes through less of the atmosphere, and less and because the radiation must pass
radiation is absorbed and reflected. through more atmosphere.
IN SUMMARY
• Earth receives radiation from the Sun, causing • Earth’s warm surface emits energy in the form of
Earth to warm up. infrared radiation.
• Regions near the equator are usually warmer • The balance between energy absorbed from the
because they receive more energy from the Sun per Sun and energy emitted from Earth ensures that
area than regions near the North and South Poles. Earth’s global temperature remains fairly constant.
CHECK YOUR LEARNING

1. Explain how the ocean interacts with the Sun’s 5. What would you expect to happen to the temperature
radiation. K/U on Earth if
2. The amount of energy Earth absorbs is equal to the (a) the amount of energy radiated by Earth increased but the
amount of energy it radiates. Why is this important? amount of energy coming from the Sun stayed the same?
Explain your answer. K/U (b) the amount of energy radiated by Earth decreased but
3. The Sun shines continuously on Earth. Explain why Earth the amount of energy coming from the Sun stayed the
does not keep warming up. K/U same? T/I
4. (a) Describe what happens to the Sun’s energy once it 6. State two reasons why you would expect the climate in
reaches Earth. Nigeria (near the equator) to be warmer than the climate
(b) Describe what happens to the energy Earth emits. K/U in Greenland (closer to the North Pole). K/U

8.4 Components of Earth’s Climate System
Other planets in our solar system have a balance of energy just as Earth does.
Would it be possible to live on another planet? Mercury has no atmosphere.
During the day, Mercury’s temperature is scorching hot at 450 °C, and at night,
it drops to a freezing –170 °C. Venus’s atmosphere is 100 times more dense
than Earth’s, and its surface temperature is over 700 °C. In contrast, Mars has
an atmosphere 100 times less dense than that of Earth, and its average surface
temperature is −63 °C. In fact, Earth may be the only planet in our solar system
that can support life as we know it. What makes Earth so special?
The Climate System

Earth’s climate system makes Earth unique among the planets. It keeps the
global temperature constant and maintains the conditions needed for life.
There are four main components of Earth’s climate system: the atmosphere,
the hydrosphere, the lithosphere, and living things (Table 1). Each of
these components receives the Sun’s energy and interacts with the other
components. Individual parts of the climate system are continually changing
as organisms grow and die, clouds form, and wind and ocean currents flow.
Table 1 Components of Earth’s Climate System
Atmosphere Hydrosphere Lithosphere Living Things
The atmosphere is made of layers The hydrosphere includes liquid The lithosphere is Earth’s rock All living things on Earth are part
of gases surrounding Earth. water in lakes and oceans, water crust, including land surfaces. of the climate system.
vapour in the atmosphere, and
ice in glaciers and at the poles.
As you learned in Section 8.3, Earth absorbs energy from the Sun. The
climate system traps, stores, and transports this energy from one place to
another and eventually radiates all of it back out to space. These complex
processes are what keep Earth’s global temperature stable.
The Atmosphere
Earth is wrapped in layers of mixed gases. Together, these layers of gases
atmosphere the layers of gases make up the atmosphere. Although the atmosphere is thin compared with
surrounding Earth the radius of Earth—like the skin on a tomato—the gases in the atmosphere
reach more than 100 km above Earth’s surface (Figure 1). Above this height
they are present only in very low concentrations.
Air is a mixture of gases. In the troposphere, the air we breathe is 78 %
nitrogen gas and 21 % oxygen gas. The remaining 1 % is a combination of
gases, including argon, carbon dioxide, and traces of helium, hydrogen, and
ozone. Some water vapour and dust are also present. The proportion of gases
changes at different levels in the atmosphere.
The atmosphere reflects some of the Sun’s energy, absorbs and radiates 10 000 km
some of the energy, and transmits some of it to Earth’s surface. Once
exosphere
the energy from the Sun reaches Earth’s surface, the atmosphere traps
much of it, warming Earth. You can think of the atmosphere as a layer of
blankets wrapped around Earth, conserving thermal energy to keep Earth
690 km
warm. The atmosphere also shields Earth from dangerous radiation. How
does it do this?
Ozone in the Stratosphere International Space Station
Although life could not exist on Earth without the Sun, the Sun’s energy is
sometimes dangerous. The Sun causes damage, such as sunburn and skin
cancer, to living things. Ozone, O3, in the atmosphere prevents most of the
harmful energy from reaching us.
thermosphere
There is more naturally occurring ozone gas in the stratosphere than in
the rest of the atmosphere. In the stratosphere, ozone absorbs high-energy
shuttle
ultraviolet (UV) radiation from the Sun, preventing it from reaching Earth’s
surface. UV radiation damages plants and causes cancer in animals and
people. Therefore, stratospheric ozone protects human health, as well as that
of plants and other animals.
In the 1970s, scientists noticed that the ozone layer over Antarctica was
thinning. In the 1990s, a similar ozone “hole” began to form over the Arctic
(Figure 2). Ozone depletion in the stratosphere is caused by human-made
compounds called chlorofluorocarbons (CFCs). CFCs belong to a family of
chemical compounds called halocarbons. Halocarbons are molecules made
85 km
up of carbon atoms linked by chemical bonds to fluorine, chlorine, bromine,
or iodine. In the case of CFCs, chlorine and fluorine are linked to the carbon
atoms. This is why they are called chlorofluorocarbons.
mesosphere
meteors
50 km
weather balloon
stratosphere
6–20 km
troposphere
Mount Everest
Figure 1 Weather occurs in the

troposphere. Airplanes often travel in
the lower stratosphere because the air
Figure 2 This is a view of Earth, looking directly down on the North is calmer there. Meteors from space
Pole. The dark blue region over the Arctic has an ozone layer that is burn up as they reach the mesosphere,
about 40 % thinner than normal. becoming “shooting stars.” The space
shuttle orbits in the thermosphere, and
most satellites orbit in the exosphere.
NEL 8.4 Components of Earth’s Climate System 331

READING Tip For many years, CFCs were used in products such as pressurized spray
Finding the Main Idea cans, refrigerators, and air conditioners. Because they are very stable and
The main idea is what the author last for a long time, CFCs gradually travel up to the stratosphere. There,
thinks about a topic or key concept. the chlorine atoms from CFCs react with ozone molecules, destroying
Start by identifying the topic or key
the protective ozone layer. Each CFC molecule can destroy hundreds or
concept of the text (Ozone Layer ) and
then look for the author’s perpective thousands of ozone molecules.
on it (chlorofluorocarbons, or CFCs, are In 1987, governments around the world signed an agreement in Montréal
harmful to the ozone layer ). called the Montréal Protocol on Substances That Deplete the Ozone Layer.
They agreed to stop the production and use of CFCs. Other short-lived
halocarbons were not banned and are still used today. The Montréal Protocol
was successful, and the ozone layer is beginning to recover. However,
scientists estimate that it will take at least 50 more years for the ozone layer
to return to its original thickness.
Ozone in the Troposphere

Although ozone has a protective role in the stratosphere, it has a toxic
and corrosive effect in the lower troposphere. UV radiation from the
Sun combines with the exhaust from cars to produce toxic chemicals and
ozone gas at ground level. This mixture of gases and particles is called
Figure 3 The brown haze over
photochemical smog (Figure 3). (You learned about smog in Chapter 5.)
the city is photochemical smog.
Photochemical smog is harmful to human health, damages buildings, and
To find out more about the work affects plants and animals. Unfortunately, the ozone being released into the
of atmospheric scientists, troposphere does not move up into the stratosphere and offers no significant
GO TO NELSON SCIENCE UV protection.
To help deal with the smog problem in Ontario, the government has
introduced the Drive Clean program. The aim of this program is to reduce
To learn more about Ontario’s smog-causing emissions produced by vehicles. All vehicles over five years
Drive Clean program, old must be tested every two years to make sure that their emissions are
GO TO NELSON SCIENCE within limits set by the government.
RESEARCH THIS SmOG DAYS

SKILLS HANDBOOK
SKILLS: Researching, Analyzing the Issue, Communicating, Evaluating 4.A., 4.C.
Changes that we are making to the lower level of the atmosphere A. Have the number of smog days per year increased in
are causing health problems. Ground-level ozone, for example, is Ontario’s cities over the past 30 years? Support your answer
a principal component of smog. Many people consider it to be the with data. T/I
most difficult air pollution problem in large cities. B. What is a catalytic converter? Who do you think should
1. Research the causes of ground-level ozone. pay the extra cost to put catalytic converters on old cars:
2. Research the health, agricultural, and environmental effects individual owners or the government? K/U T/I A
of ground-level ozone. C. What evidence is there that increased ground-level ozone is
3. Research what technology we are using to reduce related to people’s health? T/I A
ground-level ozone. D. Will climate warming increase ground-level ozone? T/I
4. Research the Great Smog of London, England, in E. Why do you think the problem of ozone smog is especially
December 1952. associated with large cities? T/I A
5. Find out whether smog over cities is only a problem in the F. Why is ozone smog considered to be the most difficult air
summer months. pollution problem? T/I
G. How many people died of respiratory illnesses related to the
GO TO NELSON SCIENCE Great Smog? K/U T/I

The Hydrosphere
The hydrosphere includes liquid water, water vapour, and ice. Liquid water hydrosphere the part of the climate
absorbs energy from warm air and the Sun and then releases energy back. It system that includes all water on and
around Earth
also reflects some of the energy from the Sun. Water vapour and clouds in
the atmosphere also reflect, absorb, and transmit energy from the Sun.
The Water Cycle READING Tip

The water cycle is an important part of the climate system (Figure 4). Energy Finding the Main Idea
is absorbed when water evaporates from oceans and lakes. This process The last sentence usually is the
concluding sentence of a paragraph. Its
has the effect of cooling its surroundings. Energy is given off when water
job is to remind the reader of the main
vapour condenses into clouds in the atmosphere. This process warms the idea and key reasons for accepting it.
surroundings. As a result, the water cycle is one way that the climate system Sometimes an author waits until the last
moves energy from one place to another. sentence to state the main idea. The last
sentence of a paragraph is a good place
to check for the main idea.
condensation
precipitation
evaporation
transpiration
surface runoff
groundwater
Figure 4 The water cycle
Large Bodies of Water and Climate Zones

Large bodies of water have an effect on the climate of nearby regions. Water
absorbs and stores more thermal energy than land. Consequently, water
heats up and cools down more slowly than land. Regions near an ocean or
large lake tend to be cooler in the summer than inland locations because
the water takes a long time to warm up as it absorbs thermal energy. These
regions also tend to be warmer in the fall as the water slowly emits stored
thermal energy.
Regions that are downwind from a large body of water have more
snowfall in the winter. If the water is not covered with ice, air passing over
the water can absorb water vapour. Once the air reaches the colder land, the
water vapour condenses as snow.

Ice and the Climate System
About 2 % of all Earth’s water is frozen. Most of this ice is located at the two
poles: as sea ice in the Arctic and as land-based ice sheets in the Antarctic.
Sea ice, or pack ice, is relatively thin ice—only a few meters thick—formed
from frozen sea water. It floats in the ocean near the North and South Poles.
Ice sheets are enormous areas of permanent ice stretching over land of the
Antarctic and Greenland. They are often several kilometres thick.
Permanent ice is also found in glaciers, on mountaintops, and in
Figure 5 Far more fresh water is frozen permafrost (Figure 5). Glaciers are permanent ice fields found in mountainous
at the poles and in glaciers than exists areas. Icebergs are large pieces of glaciers that have broken off and are floating
in all the freshwater lakes in the world.
in the ocean. Permafrost is ground that remains frozen all year round.
Earth’s permanent ice plays a vital role in the climate system. Surfaces
covered in ice and snow reflect more radiant energy than surfaces covered
in soil, rock, or vegetation. Since most of Earth’s polar regions are covered in
ice, these regions reflect back a great deal of the Sun’s energy. This reflection
is another reason why polar regions are so cold. (The other reason is
latitude, as you learned in Section 8.3.) In Section 8.10, you will learn more
about the effect that Earth’s ice has on climate.
The Lithosphere
lithosphere the part of the climate The lithosphere is the Earth’s crust. It includes all the solid rock, soil, and
system made up of the solid rock, soil, and minerals on land and extends under the oceans as well. Together with the
minerals of Earth’s crust
hydrosphere, the exposed lithosphere absorbs higher-energy radiation from
the Sun, converts it into thermal energy, and then emits the energy back as
lower-energy infrared radiation.
Land Formations and Climate Zones

Land formations also affect climate zones. Mountains and other land
formations affect how air moves over an area. As clouds are blown
upward over mountains, they lose their moisture as rainfall on the
windward side. The leeward side of the mountain receives little rain.
This process is called the rain shadow effect (Figure 6).
air cools and condenses

resulting in precipitation
region of
rain shadow
dry air
warm moist air
evaporation
Figure 6 As air is forced up the
windward side of a mountain, the air
cools and condenses. Precipitation ocean
occurs. On the leeward side of the
mountain, there is a rain shadow effect
because the air has lost its moisture.

Altitude and Climate Zones READING Tip
At high altitudes, atmospheric pressure is lower because there is less air Signal Words
above pushing down. This means that as the air from lower altitudes rises to Signal words are words or phrases that
signal a connection between ideas. “For
high altitudes, it expands and cools down. Therefore, at high altitudes, such
example” and “for instance” signal that
as in the mountains, air is cooler than at low altitudes. The “alpine climate” what follows is an example, not a main
has a strong effect on the ecosystems found at high altitudes. idea. “Therefore,” “thus,” and “for this
reason” signal a conclusion is coming.
Living Things Signal words like these can provide

clues to the main idea.
All organisms are part of the climate system (Figure 7). Through various
processes, plants and animals change the relative amounts of gases in the
atmosphere. Through photosynthesis, plants take in carbon dioxide and
release oxygen. Through cellular respiration, plants, animals, and other
organisms take in oxygen and release carbon dioxide. Some animals, such
as cows and sheep, produce methane gas as they digest their food. Tiny
organisms such as termites, and bacteria that live in wetlands and shallow
bodies of water, also produce methane.
Some gases in the atmosphere, such as carbon dioxide and methane,
absorb infrared radiation emitted by Earth. Therefore, if the amount of carbon
dioxide or methane in the atmosphere changes, it affects how much radiation
the atmosphere can absorb. Later in this unit, you will learn more about how Figure 7 Living things are part of the
changes in the composition of the atmosphere affect Earth’s climate. climate system.
IN SUMMARY
• The climate system is composed of the • Ozone in the troposphere, which forms from
atmosphere, the hydrosphere, the lithosphere, pollution at ground level, is harmful to human
and living things. health, plants, and other animals.
• Earth’s climate system moves energy around • Large bodies of water and ice and land formations
the globe. such as mountains influence climate.
• Ozone in the stratosphere absorbs harmful • Living things affect the amount of carbon dioxide,
UV radiation. Human activities have caused a oxygen, and methane in the atmosphere.
decrease in ozone in the stratosphere.
CHECK YOUR LEARNING

1. a) List the four main components of the climate system on 5. What role do large bodies of water play in Earth’s climate
Earth. system and the flow of thermal energy? K/U
(b) Describe one way in which each component is important 6. How does each of the following affect a region’s
to the climate system. K/U climate? K/U
2. Name the different layers of the atmosphere from lowest to (a) altitude
highest altitude. K/U (b) nearness to a mountain range
3. Scientists and governments are working to reduce ozone (c) which side of a large lake a location is on (i.e., upwind
levels in the troposphere, but they are trying to protect or downwind from the lake)
ozone levels in the stratosphere. Explain why this is not a 7. Predict what might happen if
contradiction. K/U (a) plants were able to absorb more carbon dioxide.
4. How does permanent ice on Earth’s surface affect Earth’s (b) microorganisms began releasing more methane. T/I A
climate? K/U

Comparing Canadian Climates SKILLS MENU

In this investigation, you will use climate data from Environment Hypothesizing Observing
Canada weather stations to compare the temperatures and Planning Evaluating
precipitation of three Canadian locations. Controlling Variables Communicating
Purpose 4. Predict an answer for each of the following

• To determine the effect that a large body of questions. Give reasons for your predictions.
water, such as an ocean, has on climate. • Which of the three locations will have the most
• To determine the effect that latitude has on precipitation?
climate. • Which of the three locations will have the
highest summer temperatures?
Equipment and Materials • Which of the three locations will have the most
• detailed map of Canada moderate climate?
• access to the Internet or a Canadian climate 5. Use the Internet to obtain monthly data for the
data source three locations. Find the following data:
• electronic spreadsheet or graph paper • average daily temperature for each month of
the year and for the entire year
• average precipitation (mm) for each month and
Procedure
SKILLS HANDBOOK
3., 4.B.
for the entire year
1. Refer to a detailed map of Canada while you look
6. Record your data in a spreadsheet or table
at the weather stations on the “Canadian Climate
similar to Table 1. This data is from Windsor,
Normals or Averages 1971-2000” website.
Ontario (Figure 1). Remember to include
2. Choose two Canadian locations on the website that data for all three locations.
have similar latitudes. One should be by the ocean
and the other should be inland, far from the ocean.
3. Choose a third Canadian location that is

• a similar distance from the ocean as your other
inland site, and
• at least 4° farther north or south (i.e., more
Figure 1 Windsor sits beside the Detroit River, between
than 300 km) from your first inland site. Lake St. Clair and Lake Erie. Does the presence of these bodies
of water impact Windsor’s climate?
Table 1 Canadian Climate Normals for Windsor Airport (42˚16´)
Month J F M A M J J A S O N D Year
Precipitation
57.6 57.3 75 85.1 80.8 89.8 81.8 79.7 96.2 64.9 75.5 74.7 918.0
(mm)
Average
−4.5 −3.2 2.0 8.2 14.9 20.1 22.7 21.6 17.4 11.0 4.6 −1.5 9.4
temperature (°C)
Source: Environment Canada

SKILLS HANDBOOK SKILLS HANDBOOK
Analyze and Evaluate 3.B.7., 6.B. Apply and Extend 3.B.8., 4.B.
(a) Using a graphing program (or pencil and paper), (g) What other factors may play a large role in
plot a graph for each location similar to Figure 1. determining climate? T/I
The graph should be a composite, showing (h) Predict how the size of a city affects its climate,
months on the x-axis, precipitation (mm) on the directly or indirectly. T/I
left y-axis, and average temperature (°C) on the

(i) Analyze other climate factors for Canadian
right y-axis. Use a bar graph to show precipitation
locations (e.g., population, altitude). A
and a line graph to show the average temperature.

To make the graphs easy to compare, use the (j) What ecozone and ecoregion were your three
same scales for the three locations. C
locations in? K/U
(k) Find the bioclimatic profiles located nearest

Climate Graph for Windsor Airport, Ontario your three locations. Compare the information
120 25 you find at the weather site and at the bioclimate
Average temperature (°C)

100 20 site. You could use a t-chart for your
Precipitation (mm)
80
15 comparison. T/I C
10
60 GO TO NELSON SCIENCE
5
40
0 (l) Using the Internet, find the average January and
20 –5 July temperatures and the annual precipitation
0 –10 for three different locations around the world.
J F M A M J J A S O N D
Account for temperature and precipitation data in
Month terms of latitude, proximity to the ocean, or other
Precipitation Average climate factors. T/I
temperature
Figure 1 Produce a graph similar to this for each of your GO TO NELSON SCIENCE
three locations.
(b) Compare the yearly average temperature UNIT TASK Bookmark
and precipitation for each of your locations.
You can apply what you learned in this activity on researching
What do you observe? Suggest explanations and summarizing climate data to the Unit Task described on
for the differences. T/I page 444.
(c) Compare the average temperatures in January
and July for each location. Which location gets
the coldest in the winter? Which gets the hottest
in the summer? Suggest an explanation for your
observations. T/I
(d) Compare your answers to (b) with those of your

classmates who examined different locations.
(e) Compare your observations with your
predictions. Suggest explanations for any
differences. T/I C
(f) Does latitude affect the climate of a location?

Does distance from a large body of water
affect the climate of a location? Explain your
answers. T/I

8.6 The Greenhouse Effect
Even without the climate system, Earth would reach a balance of energy.
The amount of energy absorbed would be equal to the amount of energy
emitted. However, without a climate system, Earth would be much colder
than it is. How much of a difference does the climate system make to Earth?
The climate system moderates Earth’s temperature by trapping and storing
energy from the Sun and distributing it around the world. As a result, the
DID YOU KNOW? air temperature remains relatively constant day and night and across large
Not Quite Like a Greenhouse regions of Earth.
Scientists once thought that
greenhouses warmed up following the What Is the Greenhouse Effect?
same principles as in the atmosphere.
In fact, greenhouses warm up because
How does the climate system trap energy to keep Earth warm? The
colder air currents on the outside are atmosphere allows much of the higher-energy radiation from the Sun to
prevented from interacting with the pass through it. This radiation is absorbed by Earth’s surface, becoming
air inside. Therefore, the greenhouse thermal energy. As a result, Earth’s surface warms up. Earth’s warm surface
effect is misnamed.
then emits lower-energy infrared (IR) radiation. Gases in Earth’s atmosphere
trap much of the IR radiation. These gases then radiate the energy equally
greenhouse effect a natural process
in all directions, which means that about half of the radiation gets sent back
whereby gases and clouds absorb infrared
radiation emitted from Earth’s surface and
toward Earth’s surface. This warms Earth even more. The trapped energy
radiate it, heating the atmosphere and keeps Earth’s global temperature much higher than it would otherwise be. The
Earth’s surface energy-trapping process is called the greenhouse effect (Figure 1).
Sun
Some energy is reflected.
Some energy is emitted

out to space.
Some energy is absorbed by

the atmosphere and clouds. Greenhouse gases in the atmosphere
absorb radiation from Earth's surface,
then radiate it back in all directions.
Some energy is
absorbed by Warm Earth emits
Earth's surface. infrared radiation.
Energy is converted to thermal energy, Some energy is radiated back to

warming up Earth's surface. Earth's surface, warming it even more.
Figure 1 High-energy radiation from

the Sun enters the atmosphere. Gases If Earth did not have a climate system, the average global temperature
and clouds in the atmosphere trap some would be about −18 °C. Because of the climate system’s greenhouse effect,
of the infrared radiation from Earth’s Earth’s actual average temperature is around 15 °C. The greenhouse effect is a
surface and radiate it back. This is the
greenhouse effect. natural process that has been happening for millions of years.

Greenhouse Gases
Most of the air in the atmosphere is made up of nitrogen and oxygen
gases. These gases do not absorb radiation from Earth’s surface. In fact, the
greenhouse effect is caused by gases that exist in very low concentrations
in the atmosphere. These gases are called greenhouse gases. The most greenhouse gas any gas in the
important greenhouse gases are water vapour, H2O, and carbon dioxide, atmosphere (such as water vapour, carbon
CO2. Other, less significant, greenhouse gases are methane, CH4, dioxide, and methane) that absorbs lower-
energy infrared radiation
tropospheric ozone, O3, and nitrous oxide, N2O. Their contribution to the
greenhouse effect is determined by their concentration in the atmosphere
and by how much thermal energy each molecule of gas can absorb.
Carbon Dioxide
Earth’s atmosphere contains only 385 ppm (parts per million) carbon
dioxide, or 0.0385 %. This is just a small percentage of all the gases in the
atmosphere. However, carbon dioxide is estimated to cause up to a quarter
of the natural greenhouse effect on Earth.
Before the industrial age, the concentration of carbon dioxide in the
atmosphere was 280 ppm. Natural sources of atmospheric carbon dioxide
include volcanic eruptions, the burning of organic matter, and cellular respiration
of plants and animals (Figure 2). In Section 9.4, we will look at how human
activity has increased atmospheric carbon dioxide and other greenhouse gases.
The carbon cycle is the movement of carbon through living things, the
lithosphere, the atmosphere, and the hydrosphere (Figure 3). Living things
and oceans are important carbon sinks. This means that they remove carbon Figure 2 Volcanic eruptions release
dioxide from the atmosphere and store the carbon atoms in a different form. carbon dioxide into the atmosphere.
Trees and other plants capture carbon dioxide during photosynthesis and use
carbon sink a reservoir, such as an
it to grow. When trees decompose or burn, the carbon is released back into ocean or a forest, that absorbs carbon
the atmosphere as carbon dioxide. In the ocean, carbon dioxide dissolves and dioxide from the atmosphere and stores
some forms solid calcium carbonate, which sinks to the bottom of the ocean. the carbon in another form
light from
Sun
vehicle and factory

Trees and other plants emissions
capture carbon dioxide
photosynthesis during photosynthesis, plant respiration
and use it to grow
animal respiration
Plants and animals Plants and animals take in oxygen

give off carbon dioxide and give off carbon dioxide and
Burning trees and fossil
when they decompose water vapour during cellular respiration
fuels release carbon dioxide
and water vapour into
Carbon dioxide dissolves in the ocean the atmosphere
waste products and
dead organisms and forms solid calcium carbonate
storage in
ocean
fossil
fuel
Figure 3 The carbon cycle
NEL 8.6 The Greenhouse Effect 339

Water Vapour
About two-thirds of Earth’s natural greenhouse effect is caused by water
vapour in the atmosphere. The quantity of atmospheric water vapour
higher more water depends on the temperature of the atmosphere. It varies from trace amounts
temperatures vapour leads
lead to more to higher to about 4 %.
water vapour temperatures How are water vapour and temperature related? Water evaporates more
readily when it is heated. Also, warmer air can hold more water vapour.
Thus, as Earth’s temperature increases, more liquid water becomes water
vapour. Because water vapour traps energy, the more water vapour there is
Figure 4 Higher temperatures cause in the atmosphere, the warmer Earth becomes (Figure 4).
more water to evaporate and form water This type of relationship is called a feedback loop. In a feedback loop,
vapour. Since water vapour traps heat
in the atmosphere, more water vapour the cause (here, high temperature) creates an effect (more water vapour in
increases the temperature further. the air) that affects the original cause (warming Earth further). In a positive
feedback loop, the effect enhances the original cause. Water vapour and
feedback loop a process in which
temperature are related in a positive feedback loop. In a negative feedback
the result acts to influence the original
process loop, the effect decreases the original cause. You will encounter more
feedback loops in Section 8.10.
mAth Tip
Methane
There is much less methane in the atmosphere than there is carbon dioxide.
Very Small Units
“Parts per million” (ppm) is However, a molecule of methane can absorb much more thermal energy than a
similar to percent, only while molecule of carbon dioxide. As a result, a molecule of methane is about 23 times
“percent” is out of 100, “ppm” is more powerful as a greenhouse gas than a molecule of carbon dioxide.
out of 1 million. “Part per billion” Methane, like carbon dioxide, comes from both natural and human sources.
(ppb) means “out of 1 billion.” It is produced naturally by biological processes such as plant decomposition
750 ppb means there are 750 in swamps and animal digestion (Figure 5). Before the industrial age, the
methane molecules out of a billion concentration of methane in the atmosphere was 0.700 ppm (or 700 ppb). It
molecules, or 750/1 000 000 000.
has now risen to 1.785 ppm (or 1785 ppb).
Figure 5 Bacteria that live in swamps

and other wetlands, and in animal
digestive systems, produce methane
as a by-product.
Ozone
You learned in Section 8.4 that ozone gas exists naturally in the stratosphere
where it forms a layer protecting Earth’s surface from the Sun’s higher-energy
UV radiation. Lower down in the troposphere, ozone acts as a greenhouse
gas. Scientists do not have a clear picture of what the average concentration of
tropospheric ozone is because it changes rapidly. However, they do know that
it contributes to the greenhouse effect.

Nitrous Oxide
A molecule of nitrous oxide, N2O, is almost 300 times more effective than a
molecule of carbon dioxide as a greenhouse gas. However, a much smaller
concentration of nitrous oxide is present in the atmosphere. Before the industrial
age, the concentration of nitrous oxide in the atmosphere was 270 ppb (0.270 ppm).
It has since risen to 321 ppb (0.321 ppm). Like carbon dioxide and methane, nitrous
oxide is produced from both natural and human sources. Nitrous oxide is produced
naturally by the reactions of bacteria in soil and water (Figure 6).
Figure 6 Tropical soils are a significant

source of nitrous oxide.
Carbon dioxide, methane, nitrous oxide, and other greenhouse gases are
present in the atmosphere in minute quantities. The following Try This activity
models the effect of a very small concentration of a substance. You will find
out whether such a tiny concentration can have any effect on the absorption of
radiation. Could such low concentrations of greenhouse gases really affect the
amount of energy trapped by the atmosphere?
T RY THIS hOW tINY CONCENtRAtIONS CAN mAKE A DIFFERENCE

SKILLS: Planning, Controlling Variables, Performing, Observing, Evaluating, Communicating SKILLS HANDBOOK
5.A.1.
The concentration of carbon dioxide in the atmosphere at the you calculated by a factor of 7 so that you actually use the
present time is approximately 0.04 %. In this activity, you will see if correct amount of ink. This also applies to food colouring.
a concentration that small can make a difference to how radiation, 5. Using the eyedropper, add the number of drops of black ink
such as light, travels through a fluid. or food colouring that you calculated in step 4 to the water.
Equipment and Materials: lab apron; water; transparent glass; Stir until solution looks uniform.
measuring cup; eyedropper; water-soluble acrylic black ink A. What difference did the addition of this tiny amount of black
(or green or blue food colouring) ink have on the visibility of the water in the glass? T/I
1. Put on your lab apron. B. How does this simple model compare with how tiny
2. Fill a transparent glass with 250 mL of water (approximately concentrations of greenhouse gases in the atmosphere trap
1 cup). infrared radiation emitted by Earth? A
3. Calculate the volume (in mL) of black ink you need to add to C. Carbon dioxide is very difficult to remove from the
the 250 mL of water to produce a concentration similar to that atmosphere. T/I A
of carbon dioxide in the atmosphere. (i) Can you think of a way of removing the black ink from
the glass of water?
4. Use your answer to step 3 to calculate how many drops of
black ink you need to add to the water. Assume 1 mL is equal to (ii) Could this method be applied to the removal of carbon
approximately 20 drops. Since acrylic black ink is mostly water dioxide in the atmosphere?
and only 10-15 % ink, you should multiply the number of drops
NEL 8.6 The Greenhouse Effect 341

How Do Greenhouse Gases Trap
Infrared Radiation?
Nitrogen gas and oxygen gas each consist of two identical atoms (Figure 7(a)).
The two atoms in these molecules can only vibrate one way: back and forth.
This limits the type of energy the molecules can absorb. When infrared
radiation reaches these molecules, they cannot absorb it.
Water, carbon dioxide, and methane consist of three or more atoms, and
have different types of atoms (Figure 7(b)). Nitrous oxide also has three atoms.
The atoms in these molecules can vibrate and wiggle in many ways, and can
absorb different types of energy. Thus, when infrared radiation reaches water
vapour, carbon dioxide, or methane, these molecules trap the infrared energy
and re-radiate it back out in every direction.
(a)
(a)
Figure 7 (a) Nitrogen and oxygen are nitrogen, N2 oxygen, O2

(a) nitrogen, N2 oxygen, O2
very poor absorbers of infrared radiation
because they consist of only two atoms. (b)
(b)
(b) Water, carbon dioxide, and methane
molecules contain several atoms as
well as different types of atoms. These
molecules can absorb different types of
energy, including infrared radiation.
(b) water, H2O carbon dioxide, CO2 methane, CH4
water, H2O carbon dioxide, CO2 methane, CH4
IN SUMMARY
• The climate system traps and stores energy • Water vapour, carbon dioxide, methane, ozone,
through the greenhouse effect. and nitrous oxide are important greenhouse gases
• The greenhouse effect is caused by gases in the because they trap Earth’s infrared radiation.
atmosphere absorbing the infrared radiation that • Living things, especially forests and oceans, are
C08-F36-UCOS10SB.ai
C08-F36-UCOS10SB.ai
is emitted from Earth’s surface and radiating it carbon sinks because they remove carbon dioxide
back again. from the atmosphere and store the carbon atoms
• The greenhouse effect warms the atmosphere and in a different form.
Earth’s surface so that life can exist on Earth.
CHECK YOUR LEARNING

1. Explain why the greenhouse effect is important to life 5. If forests serve as important sinks for greenhouse gases,
on Earth. K/U describe how past ice ages might have affected the
2. DescribeOntario Science 10effect
how the greenhouse SB concentration levels of carbon dioxide in the
Ontario Science 10 SB in the atmosphere
works and draw a diagram illustrating it. K/U C
0-17-635528-6 atmosphere. A
0-17-635528-6
3. (a) WriteFN a definition, in your C08-F36-UCOS10SB
own words, of 6. Give one natural source for each of the following
FN C08-F36-UCOS10SB greenhouse gases: K/U
“greenhouse
CO gas.” CrowleArt Group
CO CrowleArt Group (a) carbon dioxide (c) nitrous oxide
(b) Name the two most important greenhouse
Deborah gases that
Crowle
Deborah
occur naturally in the atmosphere. K/UCrowle (b) methane (d) water vapour
Pass 1st pass
4. List two Pass
factors that affect 1stimportant
how pass a particular 7. Explain how greenhouse gas molecules, in contrast to
Approved
Approved
greenhouse gas is in contributing to the greenhouse oxygen and nitrogen molecules, trap infrared radiation.
Not Approved Use a diagram and provide a sentence description. K/U
effect. K/UNot Approved
C

PERFORM AN ACTIVITY
8.7
Modelling the Greenhouse Effect SKILLS MENU
Scientists and engineers build physical models of systems that they are Hypothesizing Observing
studying. Models help us demonstrate our ideas in a hands-on way. Planning Evaluating
They also help us study the different variables in a system. Models help Controlling Variables Communicating
us answer scientific questions.
Purpose Part B: Building Your Model

To construct and test a physical model of the 7. Describe the design of your model to another
greenhouse effect student or to your teacher. Incorporate any
appropriate changes that they suggest.
Equipment and Materials 8. Write a paragraph describing what you plan
List the Equipment and Materials you will need. to build and how you will do it. Include any
Include any necessary safety equipment. materials you plan to use.
SKILLS HANDBOOK
9. Build your model.
Procedure 3.B.4., 3.B.5.
Part C: Testing Your Model
In this activity, you will design and build a physical
10. Plan a procedure to test your greenhouse model
model of the greenhouse effect. Your model should
in the presence of a strong light. Remember to
include the following functions:
account for and control all the variables, except
• allow visible light to enter the system the ones you are measuring. What measurements
• absorb that light energy will be made and for how long?
• emit the light energy in the form of lower-energy
SKILLS HANDBOOK
infrared radiation (You will feel this infrared Analyze and Reflect 3.B.7., 6.A.
radiation as thermal energy.)
(a) Graph your data. Compare it with data from
• prevent thermal energy from leaving the system previous activities in this chapter. C
• allow you to monitor the temperature of your (b) Thermal energy can leak out of a system in three
system ways: conduction, convection, and radiation. (See
the Learning Tip on page 345.) Explain how your
Part A: Designing Your Model model blocked thermal energy from escaping in
1. With your group, brainstorm some materials each of these three ways. T/I
that you could use in your model. (c) Did your model give the results that you
2. Decide how you will test your materials to see expected? Describe why it did or did not. T/I
if they work before you build your model. Test (d) Use your model to explain the greenhouse effect. A
your materials.
(e) How is your model similar to the greenhouse
3. Decide how you will control the variables in your effect? A
investigation. Also, decide how you will compare

(f) How does your model differ from the greenhouse
the temperature inside your system with the
effect? A
temperature outside your system.
4. Plan a way to reduce the amount of thermal Apply and Extend
SKILLS HANDBOOK
3.B.8.
energy leaving your system.
(g) How could you improve your model to make it
5. Sketch a diagram of your model. a more effective illustration of the greenhouse
6. List any safety precautions you will take. effect? T/I A

8.8 Energy Transfer within the Climate
System: Air and Ocean Circulation
In Section 8.3, you learned that the Sun’s radiation reaches Earth’s surface
with different intensities at different latitudes. In addition, water and land
absorb energy at different rates. As a result, Earth is unevenly heated. The
climate system transports thermal energy from areas that receive a lot of
radiation to areas that receive less radiation. This reduces the temperature
heat sink a reservoir, such as the ocean,
difference over Earth, keeping tropical regions cooler and polar regions
that absorbs and stores thermal energy warmer than they would otherwise be.
The atmosphere and the hydrosphere are essential parts of the climate
system. Both are able to absorb and store thermal energy, so they act as
heat sinks. The ocean is particularly important as a heat sink because water
can absorb much more thermal energy than air (Figure 1). When the air
is warmer than the ocean surface, the ocean absorbs energy from the air.
When the air is cooler than the ocean surface, the ocean releases energy
back into the air. This phenomenon is the reason why large bodies of water
affect the climate of nearby regions (Section 8.3).
Figure 1 The absorption and release of
thermal energy from vast oceans has a Most of Earth’s thermal energy circulation occurs in the atmosphere and
large effect on the climate system. the hydrosphere. The following Try This activity will help you understand why.
T RY THIS EXAmINE AIR AND WAtER CURRENtS

SKILLS: Hypothesizing, Observing, Analyzing, Evaluating, Communicating SKILLS HANDBOOK
3.B.6., 3.B.7.
In this activity, you will make air and water currents.
Equipment and Materials: heavy cardstock; ruler; pencil;
scissors; thread; lamp with incandescent bulb; clear glass
container; warm water; 2 ice cubes coloured with food colouring;
250 mL salt water (3 %)
Do not touch the bulb after it is turned off; it could still

be hot.
To unplug the lamp, pull on the plug, not the cord.
Part A: Air Currents
1. From cardstock, cut a circle with a diameter of 15 cm. Cut a
continuous strip 1.5 cm wide around the circle, making a spiral.
2. Tie a piece of thread to the centre of the card spiral.
3. Remove the shade from a lamp with an incandescent bulb.
Turn on the lamp. Hold the spiral by its thread above the light
bulb, without allowing the card to touch the light bulb
(Figure 2). Record your observations.
Part B: Water Currents Figure 2 Spiral of card held above an incandescent bulb
4. Fill a clear glass container such as a drinking glass with

5. Repeat the process using 3 % salt water to more accurately
warm tap water. This represents the ocean in your model.
represent the ocean.
Carefully lower a coloured ice cube into the water. This
represents a freshwater ice sheet. Watch it closely as it A. Explain your observations in Part A. T/I
melts. Record your observations in a diagram. B. Explain your observations in Part B. T/I

In the Try This activity, you observed the card moving when you placed it LEARNING Tip
over the lamp. The card moved because of a current in the air. This current Thermal Energy Transfer
formed because energy from the lamp heated the air around it. The air In convection, the movement of heated
particles began to move faster and farther apart. The warm air around the matter transfers thermal energy. For
example, ocean currents transfer thermal
lamp became less dense than the colder air above the lamp. The colder, denser
energy. In conduction, thermal energy is
air above the lamp sank toward the lamp, causing the warmer, less dense air transferred through matter as particles
to rise. This movement created a continuous current in which colder air above bump against each other. For example,
the lamp moved down to the lamp and warmed up, and warmer air near the air in contact with warm water will heat
lamp moved up and cooled down. up. In radiation, electromagnetic waves
transport energy through space. For
The same principle applies to water: warm water is less dense than cold
example, the Sun radiates energy.
water. A current forms when water is unevenly heated. Colder, denser water
falls and pushes the warmer, less dense water up. We can apply this principle warm air
cools
to the atmosphere and the hydrosphere to explain how thermal energy is and sinks
moved around the world. rising
current of
warm air
Energy Transfer in the Atmosphere
Near the equator, the Sun’s rays reach Earth’s surface with the greatest intensity
(Section 8.3). Air at the equator heats up rapidly and becomes less dense.
Colder, more dense air above it drops, pushing the warm air up into the warmer air is displaced
atmosphere. As the warm air moves up, it creates an area of low pressure upward by falling cooler air
below it. Once the warm air is high in the troposphere, it spreads out toward Figure 3 The movement of warm and
the poles and cools down. The cooler air sinks back to Earth’s surface, cold air creates a convection current.
resulting in an area of high pressure (Figure 3). This movement of warm and
cold air creates a circular current called a convection current. convection current a circular current in
The pattern of convection currents at the equator is repeated closer to the air and other fluids caused by the rising of
warm fluid as cold fluid sinks
poles. As a result, Earth has permanent bands of high and low air pressure,
parallel with the equator (Figure 4). Convection currents are
polar high
one of the main ways that energy is transported in the
atmosphere. They move thermal energy from the low pressure
equator toward the North and South Poles.
Air tends to flow from areas of high pressure
to areas of low pressure. This causes air 60°
currents, which we recognize as wind. high pressure
Since Earth has permanent bands of high westerlies
and low pressure, there are prevailing 30°
winds that blow in the same direction
almost all the time. Because Earth NE trade winds
rotates, these winds curve around the
low
globe instead of moving directly north pressure equator
or south. Prevailing winds eventually
move warm air from the equator toward SE trade winds
the poles. Prevailing winds also push
warm ocean water toward the North 30°
and South Poles. westerlies
high pressure
60°
Figure 4 Bands of high and low pressure around
the globe create air currents (winds) that blow from areas
of high pressure to areas of low pressure. Winds are named
based on the direction they originate from. low pressure
NEL 8.8 Energy Transfer within the Climate System: Air and Ocean Circulation 345
Prevailing Winds and Climate Zones
Prevailing winds are yet another factor in determining climate zones. As a
prevailing wind passes over the ocean, it picks up water vapour. When the
wind reaches land, the water vapour eventually condenses, bringing rain.
Regions where the prevailing winds pass over water before reaching land
have higher amounts of precipitation. If a prevailing wind comes from the
North Pole, it will be cold and dry. The regions this wind passes over may
become colder and drier because of the wind.
READING Tip
Clues to the Main Idea
Sometimes an author hints at a main
Energy Transfer in the Oceans
idea rather than spelling it out clearly As water travels toward the poles, it gets colder. It also becomes more salty
and directly. You can infer (make as surface water evaporates and sea ice forms. Sea ice is mostly fresh water
a reasonable guess at) an implied because it rejects the salt when it freezes. This leaves the remaining water
(indirectly stated) main idea. Look for
saltier. Both of these factors—the low temperature and saltiness of the
clues in the title, headings, examples,
facts, and reasons. Ask yourself what water—make the water at the poles more dense. As a result, the water sinks
the clues add up to. to the ocean floor.
Warmer surface water from the equator then flows toward the poles to
thermohaline circulation the continuous take its place. This process is called the thermohaline circulation of the
flow of water around the world’s oceans. Thermo means heat and haline means salt in Greek. Thermohaline
oceans driven by differences in water circulation includes all ocean currents caused by changes in temperature and
temperatures and salinity
salinity.
Ocean currents around the globe act like an enormous conveyor belt,
slowly moving water (and the thermal energy it carries) from the equator to
the poles. Figure 5 shows the main ocean currents around the world.
heat release
to atmosphere
ATLANTIC PACIFIC
OCEAN OCEAN
warm surface
current
INDIAN
OCEAN cold
saline
deep
current
heat release
to atmosphere
Figure 5 Red lines show warm ocean currents and blue lines show cold ones. Warm water
currents travel on the surface, but cold water currents travel deep down in the ocean.
C08-F25-UCOS10SB.ai

Ocean currents can also be caused by winds.
Winds are the main cause of the Gulf Stream
that transports warm water from the tropics up
the eastern coast of North America and across to
Europe (Figure 6).
Ocean Currents and Climate Zones

Ocean currents have a strong effect on the climates
of nearby land. Warm ocean currents heat the air
above them. When this warm, moist air reaches
land, it warms the land and produces rain, affecting
the climate of that area. The warm Gulf Stream
current gives the northwest coast of Europe a Figure 6 Warm ocean currents such as the Gulf Stream transport heat
warmer, damper climate than it would otherwise energy from the equator to higher latitudes. This is shown by this
have at those latitudes. satellite photograph of sea surface temperatures. Red tones are
warmer currents and blue tones are cooler currents. The east coast
Cold ocean currents cool the air above them. of North America is the dark grey area in the upper left.
When the cold, dry air reaches land, it cools the
land and creates desert areas. California and parts of Mexico are cooler and
drier because of a cold ocean current along their west coasts. You can feel the
effect of a cold ocean current when visiting Newfoundland and Labrador. The
water at beaches in Newfoundland and Labrador is colder than the water near
Prince Edward Island because of the cold Labrador current.
IN SUMMARY
• The climate system transports thermal energy • Uneven heating of Earth causes the convection
from areas that have more energy to areas that currents that create prevailing winds and ocean
have less energy. currents.
• Water, air, and land heat up at different rates • Air and ocean currents are the main ways that
when they absorb energy. energy is transported around Earth.
• When a fluid such as air or water is unevenly • Prevailing winds and ocean currents affect
heated, convection currents form as colder, denser climate in nearby regions.
fluid sinks, pushing up the warmer, less dense fluid.
CHECK YOUR LEARNING

1. (a) Use the image of ocean currents in Figure 5 of this 4. What effect would each type of prevailing wind have on the
section to identify an area in the world that is likely to land it crosses? T/I
have a warm, damp climate due to ocean currents. (a) a prevailing wind coming from the North Pole
(b) Use the map to identify a region that is likely to have (b) a prevailing wind coming from the ocean
a cold, dry climate due to ocean currents. T/I
5. Define “thermohaline.” K/U
2. Describe an idea in this section that is new to you. How did

6. Earth’s thermohaline circulation is like an “enormous
this idea change how you picture the climate system? K/U
conveyor belt.” What is being moved on this “global
3. Draw a diagram to show the movement of cold and warm air conveyor belt” that affects Earth’s climate? K/U
in the atmosphere around the equator. K/U C
7. How are convection currents formed? K/U
NEL 8.8 Energy Transfer within the Climate System: Air and Ocean Circulation 347
8.9 Long-Term and Short-Term Changes
in Climate
Large, strangely placed boulders can be seen in parts of Canada (Figure 1).
These boulders do not match the rock in the surrounding landscape. Where
did these boulders come from? Glaciers move very slowly over long periods
of time, scraping away soil and rock and carrying large boulders for miles.
The boulders are left behind when the glacier eventually melts.
About 200 years ago, scientists began to study land formations caused by
moving glaciers. They hypothesized that there was a time when much more
Figure 1 Boulders such as this one, of Earth’s surface was covered in ice—in other words, an ice age. Since then,
called erratics, triggered scientists to think
about the movement of glaciers, leading to scientists have found more evidence of past climate change.
research into past climates. Have you ever Scientists have discovered that Earth’s climate goes through a variety
seen a boulder similar to this one? of natural changes. Changes in climate are triggered by changes in Earth’s
ice age a time in Earth’s history when energy balance. If something causes Earth’s surface and atmosphere to
Earth is colder and much of the planet is absorb the Sun’s energy differently, the climate will change. Or, if the amount
covered in ice of energy received from the Sun changes, Earth’s climate will also change.
Over millions of years, the movement of Earth’s crust triggers changes
in the climate by affecting how much of the Sun’s energy is absorbed. Over
hundreds of thousands of years, Earth’s climate also undergoes cyclic changes
from warmer to colder climates. These cycles are a result of variations in
Earth’s orbit. Changes like these are sometimes called long-term changes
because they happen over very long periods of time. Within long-term
changes, there are also shorter periods of climate change caused by natural
events such as volcanic eruptions. These are known as short-term changes.
plate tectonics the theory explaining
the slow movement of the large plates of
Earth’s crust
Long-Term Changes Due to Continental Drift
According to the theory of plate tectonics, Earth’s continents have
continental drift the theory that Earth’s
continents used to be one supercontinent
moved over the surface of the globe for hundreds of millions of years.
named Pangaea This movement of the continents is called continental drift. Over time,
one large supercontinent split up to form the continents we see today,
225 million years later (Figure 2).
EA LAURASIA
A
G
N
GO
PA
DW
N
AN
ALA
ND
PERMIAN TRIASSIC JURASSIC CRETACEOUS PRESENT DAY

225 million years ago 200 million years ago 135 million years ago 65 million years ago
Figure 2 Continental drift affects climate because it changes the distribution of land around the
globe.
Continental drift influences Earth’s climate in many ways. When continents

move, ocean currents and wind patterns change. This affects heat transfer. Millions
of years ago, major air and ocean currents were not the same as they are now.
Continental drift also affects the distribution of land mass. At present,
the northern hemisphere, which includes Canada, has the most land mass.

Because there are fewer large bodies of water, the northern hemisphere has
the coldest winters and the warmest summers. The greater amount of ocean To find out more about the
in the southern hemisphere produces a more moderate climate. This was not movements of the continents,
true, however, in the Permian period (225 million years ago). GO TO NELSON SCIENCE
The uplifting of new mountain ranges, caused

by the movement of Earth’s plates, affects SIBERIA
local and regional climates. The weathering ARCTIC
OCEAN
of old mountain ranges over millions of
years also results in regional climate changes.
These two effects have changed the regional
climate in different parts of Canada. Canada
contains younger mountain ranges, such as the
Canadian Rockies, and older ranges, such as the
Appalachians.
Scientists have identified other factors that
may affect climate over very long or “geological”
periods of time. For example, the amount of NORTH AMERICA
energy the Sun produces can gradually change NORTH
PACIFIC
over time. OCEAN NORTH
ATLANTIC
OCEAN
Long-Term Cycles in
Climate
About 20 000 years ago, Earth experienced
its last ice age. The average temperature was migration route
Beringia land bridge
almost 10 °C lower than it is today. Ice sheets
area covered by ice
about 3 km thick covered much of Canada.
As the water in the oceans froze, sea levels
Figure 3 The Beringia land bridge was a temporary formation of land between
dropped. Land that was normally under the
Alaska and northern Europe. One theory suggests that humans walked over
ocean became exposed, forming links between the land bridge to settle in North America about C08-F39-UCOS10SB.ai
25 000 years ago.
continents. Plants and animals, including formerly C09-F04-UCOS10SB
humans, migrated across these bridges and Archaeologists study what life
was like hundreds or thousands
settled in new lands (Figure 3). Ontario Science 10 SB
of years ago. To find out more
0-17-635528-6
For the last 800 000 years or more, FN
Earth’s climate has cycled between
C08-F39-UCOS10SB
about the work of archaeologists,
freezing ice ages and warmer interglacial
CO periods Crowle(FigureArt4).
Group GO TO NELSON SCIENCE
Deborah Crowle
Pass 2nd pass interglacial period a time between ice
Change inApproved
Temperature over Time ages when Earth warms up
(°C above/below current)
4 °C Not Approved
Temperature
0 °C
–4 °C
–8 °C
400 000 300 000 200 000 100 000 0

Years before present
Figure 4 Graph of changes in Earth’s average temperature over the past 400 000 years. The values
on the y-axis represent deviations from Earth’s average temperature today. Notice that major changes
in temperature happen in regular cycles. Warm interglacial periods occur about every 100 000 years.
NEL 8.9 Long-Term and Short-Term Changes in Climate 349

Why Do Interglacial Periods and Ice Ages
Keep Happening?
In 1941, an engineer and amateur astronomer named Milutin Milankovitch
studied long-term cycles of climate change. He developed a theory on the
causes for these changes. Milankovitch calculated that Earth’s orbit around
the Sun changes in three main ways (Figure 5).
precession
Earth’s orbit
Sun
tilt
eccentricity
axis of rotation
Figure 5 Milankovitch cycles
• Eccentricity (shape of orbit): The shape of Earth’s orbit around the Sun
varies from being nearly circular to being more elliptical (like a flattened
circle). This variation is caused by the influence of Jupiter’s and Saturn’s
gravities. It has several components, which combine to give an approximate
cycle of 100 000 years. Earth’s orbit is currently more elliptical.
• Tilt: Over a cycle of about 41 000 years, Earth tilts back and forth on its axis
from 22.1° to 24.5°. As the angle increases, seasonal differences increase.
Earth’s axis is currently at 23.5°. The angle is slowly decreasing.
• Precession of tilt (wobble): As Earth spins on its axis, it slowly wobbles
in a cycle over 26 000 years. The angle of tilt remains approximately the
same, but the direction of tilt changes. This is similar to how a top behaves
when you spin it (Figure 6). Earth’s axis is currently pointing toward Polaris,
which we call the North Star. More than 5000 years ago, the North Star was
Figure 6 The axis of a spinning toy Thuban. In another thousand years, Airai will be the new North Star.
gyroscope or top slowly wobbles around Together, these changes add up to cause regular cycles of ice ages and interglacial
the vertical.
periods. These regular cycles have taken place for more than 400 000 years.
These small changes in Earth’s orbit happen very slowly, over tens and
hundreds of thousands of years. However, most climate scientists think that,
To learn more about the work of
combined, they are the main trigger of the 100 000-year cycles in Earth’s
an astronomer, climate seen in Figure 3 of this section. They are the most likely reason that
GO TO NELSON SCIENCE astronomers have identified so far.
The small changes in the amount of energy Earth receives from the Sun
temporarily unbalance the climate system. Positive feedback effects then

enhance this small change. The climate system rebalances again, but at a
different global temperature.
A decrease in energy from the Sun, causing lower temperatures, creates
an ice age. An increase in energy, causing warmer temperatures, creates a
warm interglacial period. Today, we are in a relatively warm period.
Short-Term Variations in Climate

Even though Earth’s climate is in a stable warm period right now, we still see
small variations in climate over tens of years to hundreds of years. Short-term
variations in climate are caused by a variety of factors, including volcanic
eruptions, small changes in the Sun’s radiation, and changes in the circulation
DID YOU KNOW?
of air and ocean currents. In the rest of this section, you will learn how
relatively small changes in these factors can affect the entire climate system. The Year with No Summer
In 1815, Mount Tambora in Indonesia
erupted, sending 150 cubic kilometres
Volcanic Eruptions of dust into the stratosphere. The
Volcanic eruptions spew rocks, dust, and gases high into the atmosphere next year was called “the year with
(Figure 7). In particular, ejected particles of sulfur dioxide reflect the Sun’s energy no summer.” There was widespread
famine in North America following
back out to space. This has the effect of shading Earth’s surface. As a result, less
summer snowfalls and frost.
energy is present in the climate system and Earth temporarily cools down.
(a) (b)
Figure 7 (a) Mount Pinatubo, in the

Philippines, erupted in June 1991.
Air and Ocean Currents (b) This map, based on satellite images
taken 18 days after the eruption of
Air and ocean currents affect Earth’s climate in many different ways. Changes
Mount Pinatubo, shows the distribution
to the ocean’s thermohaline circulation may cause abrupt changes in climate, of 17 Mt (megatonnes) of sulfur dioxide
although this phenomenon is not fully understood. that was produced during the eruption.
Earlier, you learned that thermohaline circulation is an important part
of the “conveyor belt” of ocean currents. About 12 000 years ago, Earth’s
climate was in transition from the last ice age into the present warm period.
Enormous ice sheets across Earth’s surface melted, dumping vast quantities
of fresh water into the oceans. This fresh water was less dense than the salty
ocean water, so it stayed near the surface of the ocean.
Scientists believe that this fresh water may have disrupted the thermohaline
circulation. Earth’s climate abruptly became colder again for a while, possibly
due to this disruption.

Some changes in air and ocean currents occur regularly. A dramatic
change takes place in the Pacific Ocean every three to seven years. The
prevailing winds temporarily switch direction, changing the ocean currents
in that area. Instead of pushing warm surface water toward the west Pacific,
El Niño a recurring change in the Pacific
winds and ocean currents that brings
the prevailing winds push the warm water east, toward South America.
warm, moist air to the west coast of This periodic shift in Pacific winds and ocean currents is called El Niño
South America (Figure 8).
Normal Conditions El Niño Conditions
rising sinking sinking sinking

rising air rising air
air air air air
South
high low South
America
pressure pressure America
Australia Australia
strong countercurrent
warm water warm water
cold water cold water
Figure 8 Red arrows represent warm water currents. (a) Normally, the west coast of South
America is cold and dry, due to a cold ocean current nearby. (b) During an El Niño event, changes
to prevailing winds affect the movement of ocean water. The west coast of South America receives
warmer, wetter weather.
RESEARCH THIS EL NIÑO

SKILLS HANDBOOK
SKILLS: Researching, Analyzing the Issue, Communicating 4.A.1., 4.A.2.
In this activity, you will discover how an El Niño event affects the B. During an El Niño year, winds push warm water toward
climate on the coast of South America. the coast of Peru and Ecuador. What effect does this warm
1. Research the normal climate in Peru water have on the temperature and precipitation in Peru and
and Ecuador. Record your findings. Ecuador? T/I
2. Research the effect of El Niño on temperature and C. Warm water and air contain more energy than cold water
precipitation in Peru and Ecuador. Record your findings. or air. Also, storms and hurricanes need a lot of energy to
3. Research the relationship between El Niño and severe develop. How does El Niño affect the number of storms and
weather like droughts, storms, and floods in California, hurricanes in Peru and Ecuador? T/I
Australia, and southeast Asia. D. Summarize the effects of El Niño on countries bordering
the east side of the Pacific Ocean. Include environmental,
economic, and social impacts. T/I A
A. The cold Peru Current, also called the Humboldt Current, flows E. What effect does El Niño have on the west side of the Pacific
north along the west coast of South America. What effect does Ocean? T/I
the Peru Current have on the climate of Peru and Ecuador? T/I F. What impacts does El Niño have on Canada? Think about
direct and indirect effects. T/I A
Changes in the Sun’s Radiation

Even small changes in the Sun’s radiation can affect climate. If the amount
of radiation from the Sun drops, Earth receives less energy. Earth’s climate
cools down. If the amount of radiation from the Sun increases, our climate
warms up. Scientists do not yet fully understand the reasons why the Sun’s
energy decreases or increases over shorter time scales.

T RY THIS EXPLORING THE SUN’S ENERGY OUTPUT
SKILLS: Analyzing, Evaluating SKILLS HANDBOOK
4.A.5., 6.A.
Quantitative observations indicate that Earth’s average B. Examine the total solar irradiance. This satellite data only
temperature has been slowly rising over the past 50 years. Some goes back to 1975. T/I
people argue that this is due to natural causes, such as changes (i) Compare solar irradiance variation with the variation in
in the Sun’s energy output. To support their argument, they refer sunspots.
to changes in sunspot activity or energy from the Sun (total solar
(ii) How has total solar irradiance varied from 1975 to
irradiance).
2005?
1. Use the Internet to find a graph that plots sunspot number, (iii) What values have the peaks varied between? (Be careful
cosmic ray intensity, and total solar irradiance since 1950. to choose the correct vertical scale.)
Notice the cycles. (iv) Would you conclude that the total solar irradiance has
been increasing or decreasing since 1975?
C. What do you conclude about the Sun’s activity since 1975?
A. Using the graph, examine the “smoothed sunspot number” Since 1950? T/I
from 1950 to 2005. Since 1950, has the number of sunspots
in each peak year increased significantly? T/I
IN SUMMARY
• Continental drift and other natural factors have • Long-term cycles in Earth’s climate correspond to
profoundly affected Earth’s climate over the past changes in the shape of Earth’s orbit, changes in
hundreds of millions of years. Earth’s tilt, and the precession of Earth’s axis.
• Over the last 400 000 years or more, climate • Short-term variations in climate can be caused by
has continually cycled from ice ages to warmer volcanic eruptions, changes in the Sun’s radiation,
interglacial periods about every 100 000 years. and changes in the circulation of air and ocean
currents.
CHECK YOUR LEARNING

1. Describe three ways in which plate tectonics and 4. List at least three possible causes of short-term climate
continental drift might have affected global climate change. K/U
patterns in the past. K/U 5. How do volcanic eruptions affect climate? Use a labelled
2. (a) What is an ice age? diagram in your answer. K/U C
(b) How did scientists infer the possibility of an ice 6. Describe one way in which changing air or ocean currents
age by examining boulders and other marks left by can affect climate. K/U
glaciers? K/U 7. How do we know that the long cycle of ice ages is not
3. (a) What is an interglacial period? caused by some other factor, such as
(b) How frequently do warm interglacial periods occur? (a) volcanic activity?
(c) Are we currently in an ice age or an interglacial (b) continental drift and plate tectonics?
period? (c) long cycle changes in the Sun’s energy output? K/U T/I
(d) Has Earth spent more time in cold ice age periods or 8. Explain the changes that scientists think are responsible
in mild interglacial periods over the past for the 100 000-year climate cycles. K/U
400 000 years? K/U A

SCI ENCE OSSLT
Lake Agassiz: Studying Past Climate

Huge sheets of ice covered much of North America during the last
ice age. When the ice age ended, most of this ice gradually melted
as Earth’s temperature began to rise. Several large lakes formed
along the southern edge of the ice sheet as it melted. The largest
of these lakes, Lake Agassiz, formed across south-central Canada
and into the United States (Figure 1).
Hudson
Bay
E WA N
AT C H
MANITOBA
Lake
SASK
Agassiz
ONTARIO
NORTH Su pe r i or
ke
DAKOTA MINNESOTA La
0 150 300 km
Figure 3 Devil’s Crater in northern Ontario is just one of the features
Figure 1 Lake Agassiz, as mapped by Teller and colleagues. Lake caused by water draining from Lake Agassiz thousands of years ago.
Agassiz probably held more fresh water than all the lakes in the
world do today.
Lake Agassiz and Climate Change
Research suggests that large changes in the volume of Lake
Lake AgassizC08-F41-UCOS10SB.ai
and Global Flooding Agassiz happened at about the same time as Earth’s temperature
James T. Teller is a geologist at the decreased. Changes in Lake Agassiz could have caused abrupt
formerly C09-F11-UCOS10SB
University of Manitoba (Figure 2). Teller changes in Earth’s climate. How could changes in a lake’s size
and other scientists have reconstructed affect climate? Fresh water from Lake Agassiz would have poured
the history of Lake Agassiz by examining into the North Atlantic Ocean. This fresh water may have hindered
ancient beaches and sediments from the flow of warm water north from the equator to the North
the ancient lake bottom. In 2004, Teller Atlantic. This change in water flow would have interrupted the
received the Michael J. Keen medal from northward transfer of thermal energy. These events could have
the Geological Association of Canada for triggered a period of cooling in Europe and North America.
Figure 2 James T. Teller his research on Lake Agassiz.
41-UCOS10SB Scientists believe that the volume Connections to Today’s Climate
e Art Group
of water in Lake Agassiz changed abruptly several times during its Today, land-based ice in the Arctic is beginning to melt. Fresh
ah Crowle
history (Figure 3). At those times, the ice around the lake broke, water is pouring into the Atlantic Ocean as this ice melts. Sea
ass allowing huge quantities of water to drain into the ocean. The levels are expected to rise, just as they did when Lake Agassiz
additional water caused sea levels around the world to rise slightly. drained. Scientists want to know whether the flow of fresh water
Teller believes flooding from Lake Agassiz may be the source of will interrupt ocean currents and affect world climate. Information
flood stories found in the Bible, First Nation legends, and other from Lake Agassiz may help scientists determine how Earth’s
ancient stories. climate will change over the next century.
354 NEL
Feedback Loops and Climate 8.10
Small changes, such as a decrease in snow cover, can have a very large effect
on Earth’s climate. This is because small changes are sometimes enhanced, or
made bigger, by feedback loops (Section 8.6). Feedback loops can also act in
the opposite way and cancel out changes.
Recall that, in a feedback loop, the cause creates an effect that impacts the
original cause. In a positive feedback loop, the effect increases the original cause.
In a negative feedback loop, the effect decreases the original cause. Feedback
loops make it difficult for climatologists to predict the effects of changes.
The Water Vapour Feedback Loop

You probably know that more water vapour enters the atmosphere when the
climate warms up, due to increased evaporation from Earth’s lakes and oceans.
(You studied the water cycle in Section 8.4.) This causes the climate to warm
up even more because water vapour is a greenhouse gas and traps infrared
radiation emitted by Earth. Conversely, if the climate cools down, less water
vapour forms and the climate cools further. These are positive feedback loops.
The water vapour feedback loop becomes more complex when you consider
clouds (Figure 1). More water vapour usually means more clouds. If the clouds
form relatively low in the atmosphere, then they trap thermal energy near
Earth’s surface. You may have noticed that cloudy nights are usually warmer
than clear nights. Low clouds create a positive feedback loop:
warmer temperatures → more (low) clouds → even warmer temperatures
If the clouds form at high altitudes, however, then they reflect the Sun’s
radiation back out to space. This creates negative feedback:
warmer temperatures → more (high) clouds → cooler temperatures
The Albedo Effect

Different surfaces reflect different amounts of the Sun’s radiation. The albedo a measure of how much of the
proportion of radiation reflected by a surface is called its albedo. Ice and snow Sun’s radiation is reflected by a surface
have high albedos because they reflect more radiation than grass or trees
(Figure 2). This is why you squint when you go outside after a snowfall.
Albedo values
ice 0.75
grasslands 0.20
Figure 1 Low clouds are involved in positive feedback loops. High Figure 2 Ice reflects about 75 % of the Sun’s radiation; its albedo is 0.75.
clouds are involved in negative feedback. Grass reflects about 20 % of the Sun’s radiation; its albedo is 0.20.
NEL 8.10 Feedback Loops and Climate 355

DID YOU KNOW? A planet’s albedo is a measure of the amount of radiation that is reflected
Venus, the Bright Planet back when the Sun shines on it. Different parts of Earth’s surface have different
Venus has the highest albedo of the albedos: water (8 %), forest (10 %), sand and desert (25 %), fresh snow (85 %),
planets in our solar system: 0.65. and clouds (40 to 70 %). On average, Earth reflects 30 to 40 % of the Sun’s
Venus’s high albedo is one of the
radiation, so Earth’s average albedo is between 0.30 and 0.40.
reasons why this planet is often the
brightest object in the night sky. Venus One of the most important feedback loops in Earth’s climate system is
appears sometimes as the brightest called the albedo effect. This is the positive feedback loop between ice on
object in the western sky after sunset, Earth’s surface and Earth’s average temperature.
and sometimes as the brightest object If Earth’s average temperature drops slightly, more ice forms. This ice
in the eastern sky before sunrise.
reflects more of the Sun’s radiation, and Earth’s temperature decreases
even more. If Earth’s average temperature increases slightly, more ice melts
(Figure 3). More of the Sun’s radiation is absorbed, and Earth’s temperature
albedo effect the positive feedback
loop in which an increase in Earth’s increases even more.
temperature causes ice to melt, so more
radiation is absorbed by Earth’s surface,
leading to further increases in temperature
less of Sun’s more of Sun’s
radiation more ice radiation
ice melts
reflected by forms reflected by
the ice the ice
albedo effect albedo effect
(warming) (cooling)
Earth’s Earth’s
temperature temperature
increases decreases
Figure 3 The albedo effect is the relationship between ice and Earth’s temperature.
T RY THIS TESTING THE ALBEDO EFFECT

SKILLS: Predicting, Planning, Controlling Variables, Performing, Observing, Analyzing, Evaluating, Communicating SKILLS HANDBOOK
3.B.
In this activity, you will design an experiment in which you model 2. Submit your procedure to your teacher for approval.
the albedo effect. You will plan and create a simple system with 3. Carry out your investigation and record your
a source of light shining on a closed container with a transparent observations.
side and then measure the temperature of your system over time.
A. What variable did you change? How do you know that
Next, you will change the albedo of some part of your system and
changing this variable gave your system a different
repeat your experiment. To draw meaningful conclusions, change
albedo? T/I
only one variable at a time.
B. List all the variables that you kept constant. How confident
Equipment and Materials: thermometers or temperature are you that all variables except the one you tested were
sensors; light source; surfaces with different albedos (i.e., white constant? T/I
or black construction paper or paint); sealable glass or plastic
C. The ice caps at Earth’s poles are becoming smaller as the
container
ice melts. Based on your investigation, explain what effect
1. Design and write up a procedure that you will follow. the melting of the polar ice caps could have on Earth’s
Consider the following questions. climate. Is this a positive feedback loop or a negative
• How often and for how long will you measure the feedback loop? A
temperature of your system?
• How will you change the albedo of your system?
• How will you record your observations?

In Figure 4 you can see that Earth’s climate shifts relatively quickly from
an ice age into the warm, interglacial period that follows it. This rapid change
can be partly explained by the albedo effect.
Change in Temperature over Time

(°C above/below current)
4 °C
Temperature
0 °C
–4 °C
–8 °C
400 000 300 000 200 000 100 000 0

Years before present
Figure 4 Notice how average temperatures swing quite rapidly between warm and cold periods.
IN SUMMARY
• In a positive feedback loop, the effect increases the • Low clouds are involved in a positive feedback loop
original cause. between Earth’s temperature and water vapour. High
• In a negative feedback loop, the effect decreases the clouds are involved in a negative feedback loop
original cause. between temperature and water vapour.
• Feedback loops can enhance small changes in the • The albedo effect is a positive feedback loop linking
climate system. the area of permanent ice on Earth’s surface and
Earth’s average temperature.
CHECK YOUR LEARNING

1. What is a feedback loop? K/U 6. (a) Write out a definition of a planet’s albedo using your
2. What is the difference between a positive feedback loop own words.
and a negative feedback loop? Give an example of each. K/U (b) If a planet’s albedo is affected by ice, would it
3. Grass has an albedo of about 0.20 and rock has an contribute to a positive or a negative feedback loop in
albedo of about 0.30. Which will reflect more of the Sun’s the planet’s climate? Explain. K/U T/I
radiation, grass or rock? Explain why. K/U 7. During the last ice age, more than half of Earth’s surface
4. Explain, using a concept map or flow diagram, how (both land and sea) was covered in ice. K/U T/I C
an increase in water vapour might result in a positive (a) Create a hypothesis about the albedo of Earth during
feedback loop. Include in your explanation the fact that the last ice age.
Earth gives off infrared radiation. T/I C (b) Based on your answer to (a), did Earth absorb more or
5. Suppose that an increase in water vapour resulted in the less of the Sun’s radiation during the last ice age than
increase in the number of cloudy days. These clouds kept it does today? How would this have affected Earth’s
the Sun’s light from reaching Earth, thus lowering the climate?
average temperature. K/U T/I (c) Draw a diagram for the feedback loop caused by the
(a) What would happen to the amount of water albedo effect during the last ice age.
evaporating from lakes and oceans in this scenario?
(b) Would this be a positive or a negative feedback loop?
Explain with a diagram.
NEL 8.10 Feedback Loops and Climate 357

8.11 Studying Clues to Past Climates
Scientists have recorded temperature, rainfall, and other climate data over
the last 200 years and more. These data give us a good record of the world’s
climate during this period. Before that, people kept informal climate records
in journals, paintings, farming records, and oral histories (Figure 1).
Paleoclimatologists study past climate. How can they determine what the
climate was like thousands of years ago? Natural materials such as rocks
and ice preserve clues to past climates. Proxy records are stores of natural
information that we can measure today that tell us what the climate was
like in the distant past. For example, climatologists study fossils, tree rings,
layers of ice, and coral reefs. Scientists are interested in the structures of
these materials as well as in their chemical makeup.
Figure 1 Paintings and drawings Proxy records are indirect records of climate. This means that they
from the 1500s to 1850s show snow are not quantitative measurements of temperature or precipitation taken
and people skating on rivers that do
not freeze over today. This period is directly at the time. Scientists compare proxy records with quantitative
known as the Little Ice Age. It was historical records over the last several hundred years to determine what
likely caused by small decreases in the the proxy observations represent. This technique allows scientists to extend
Sun’s radiation, along with several large
proxy records back into the distant past.
volcanic eruptions at that time.
proxy record stores of information in Ice Cores

tree rings, ice cores, and fossils that can
be measured to give clues to what the
The ice in Greenland and Antarctica contains air bubbles that have been
climate was like in the past trapped for thousands of centuries. Scientists drill deep into the ice and
extract long cylinders of ice called ice cores. The ice at the top of an ice core
is very recent, whereas the bottom of an ice core may be up to 800 000 years
old. Ice cores provide our longest record of conditions in the atmosphere.
Scientists cut the ice cores into very thin slices and test the air bubbles
in each slice for various gases (Figure 2). The tests establish how much
carbon dioxide, methane, and nitrous oxide was in the air when the air
bubble formed. Ice cores show paleoclimatologists that concentrations of these
greenhouse gases have changed dramatically over Earth’s history.
Figure 2 Scientists drill and examine

ice cores to study gases trapped inside
the ice.

Scientists also test ice cores for oxygen. Different types of atoms of oxygen
exist. Some types are heavier than others. By measuring the ratio of light to
heavy oxygen atoms, scientists can obtain information about air temperature.
The colder the air when the bubble was formed, the more light oxygen is
present in the bubble.
Ice cores also give information on precipitation and on volcanic eruptions
through preserving layers of dust.
Ice core records show scientists that Earth has gone through many changes
in climate, from ice ages to interglacial periods and back to ice ages (Section
8.9). We also know that temperature and greenhouse gas concentrations DID YOU KNOW?
increase and decrease at the same time. During warmer periods, levels of Old Trees in Ontario
greenhouse gases were higher. When it was cooler, levels were lower. Ontario has some very ancient trees.
Some Eastern white cedar trees growing
on the Niagara Escarpment are over
Tree Rings and Coral Reefs 1 500 years old. Scientists have
Trees create one growth ring per year. Tree rings are thickest in years with collected data from living and dead trees
good growing conditions. For example, a warm, wet year will produce a thick to construct a climate record of southern
Ontario going back 2 767 years.
growth ring, whereas a cold, dry year will produce a thin ring (Figure 3).
Some trees, such as the bristlecone pine and the California redwood, live for
thousands of years. Scientists assemble clues from both living and dead trees
to collect records of climate going back as far as 10 000 years. In Ontario,
trees have provided proxy climate data for the past 2 767 years.
Figure 3 Tree rings are wider in good growing years and narrower in poor growing years.
Records are also preserved in coral reefs (Figure 4). Like trees, corals
add layers of growth each season. Scientists drill cylinders of coral and To learn more about using proxy
records such as tree rings and
study their layers. Information from coral layers helps determine the coral reefs,
temperature of the surface ocean water when each layer was growing. GO TO NELSON SCIENCE
Figure 4 Coral reefs grow near the

surface of the ocean. Layers of coral
grow at different rates in warm water
than in cold water.
NEL 8.11 Studying Clues to Past Climates 359

Rock, Ocean Sediment, and Caves
Layers of soil and rock build up on Earth’s surface over time. Each layer
may contain clues, such as plant pollen or fossils, to the climate at that time
in that location. Fossils of pollen grains can be used to identify plants that
Palynologists study pollen. To find grew thousands of years previously. Scientists who study pollen are called
out more about this unusual career, palynologists. They use the size, shape, and presence of pores, furrows, and
GO TO NELSON SCIENCE air sacs to identify the species of the plants (Figure 5).
Figure 5 How many types of pollen can

you see?
DID YOU KNOW? In the ocean, layers of sediment drift to the ocean floor and form layers
Alice Wilson: A Canadian Scientist of rock. Scientists drill cores of sediment from the ocean floor (Figure 6).
Alice Evelyn Wilson (1881–1964) Sometimes scientists find fossils of marine plants and animals that lived in
was the first female geologist at the warmer water than the location where they are found today. This is evidence
Geological Survey of Canada. She
that the layer containing these fossils formed during a warmer climate.
worked there for 54 years, cataloguing
the geological formations in the Information from these sediment cores has allowed scientists to build a
Ottawa region. Wilson covered about picture of Earth’s climate over thousands of years in the past.
16 000 km2 of land—much of it by In caves, rock formations grow as the minerals that are dissolved in
bicycle—identifying, classifying, and dripping water solidify into rock (Figure 7). Scientists can measure and date
writing about fossil formations.
layers from these rocks. These rock formations grow faster in rainy weather,
so analysis of the layers helps determine how much precipitation occurred at
specific times in the past.
Figure 6 This sediment core from the ocean floor shows layers Figure 7 Stalactites (from the roof) and stalagmites (from the floor)
containing fossils from the past. show indirect evidence of precipitation patterns.

T RY THIS ANCIENT CLIMATES IN ARCTIC LANDS
SKILLS HANDBOOK
SKILLS: Predicting, Analyzing, Communicating 3.B.
In Section 8.9, you learned that the continents have moved over A. If these islands were located in another place on Earth’s
the past millions of years. This means that some of the islands in surface millions of years ago, what do you think their climate
the Canadian Arctic might not always have been so far north. might have been like? Do you think the ocean currents that
1. Locate on a map some of the northern islands in Canada’s flowed past them millions of years ago might have been
Arctic, such as Axel Heilberg, Baffin, Devon, Ellesmere, different? (Refer to Figure 2 in Section 8.9.) T/I
and Victoria Islands. What kind of plant and animal life do B. What kind of fossils have been found on or around these
you think lived on these islands millions of years ago? Arctic islands? Was your prediction correct? T/I
Give reasons for your predictions. (Refer to Figure 2 in C. What kind of climate did the islands have at the time when the
Section 8.9.) plants or animals represented by these fossils were active?
2. Over the past 25 years, scientists have discovered fossils Contrast this with the current climate of the region. T/I
on some of these islands. Locate and analyze the fossil data D. Summarize your findings in a short paragraph of several
reported from these sites. sentences, describing what kind of life existed in the Arctic
millions of years ago and how we know that the climate then
was quite different from the climate today. T/I A
UNIT TASK Bookmark

You can apply what you learned in this section about records of past climates to the Unit
Task described on page 444.
IN SUMMARY
• Proxy records are indirect records of past climates • Analyzing the growth rings on ancient trees and
contained in natural materials. coral provides data on temperature and precipitation
• Analyzing air bubbles in ice cores provides data on from the past.
greenhouse gases and temperature from the past. • Sediment cores from the ocean floor contain clues
such as fossils that provide data about past climates.
CHECK YOUR LEARNING

1. (a) How do old paintings inform us that there was a Little 5. Explain why the following statement is incorrect:
Ice Age from 1500 to 1850 in Europe? Climatologists use the data from ice cores to directly
(b) Are paintings proxy records or direct records of measure past temperatures. K/U
climate? K/U 6. In Ontario, our historical records of temperature
2. (a) How do scientists know what Earth’s climate was like and precipitation only go back 200 years. However,
over the past 200 years? climatologists have been able to establish a climate
(b) How do scientists know what Earth’s climate was like record for southern Ontario that goes back 2 767
thousands of years in the past? years. K/U
(c) How do scientists know that these records of Earth’s (a) What was the main proxy record that they used to
climate thousands of years ago are accurate? K/U do this?
3. Suppose you are a climatologist who is studying climate in (b) What can they do to show that this proxy record
Ontario 300 years ago. List three different sources you could is accurate?
examine for information on the climate at that time. K/U 7. How do fossils tell us about the climate that existed in the
4. Give one example of information scientists can obtain from past? (Hint: Use the idea of ecozones and ecoregions that
each of the following proxy records: K/U you studied in Section 8.2.) T/I A
(a) ice cores
(b) tree rings
(c) sediment cores from the ocean floor
NEL 8.11 Studying Clues to Past Climates 361
CHAPTER
LOOKING BACK
8
Earth’s climate system is Earth’s climate system The greenhouse effect keeps
powered by the Sun. includes the atmosphere, the Earth warm by trapping
hydrosphere, the lithosphere, thermal energy radiated by
• Climate describes the weather that
and living things. Earth.
you can expect in a region. (8.1)
• The climate system is the complex • The atmosphere is composed of • Water vapour is the most important
set of components that interact with 78 % nitrogen gas, 21 % oxygen greenhouse gas contributing to the
each other to produce Earth’s climate. gas, and trace amounts of other natural greenhouse effect, followed
(8.3, 8.4) gases, including carbon dioxide, by carbon dioxide and methane. (8.6)
• About 30 % of the energy from methane, and ozone. (8.4) • Greenhouse gases absorb
the Sun is reflected back to space. • The hydrosphere and lithosphere lower-energy infrared radiation,
The remaining 70 % is absorbed absorb higher-energy radiation preventing it from escaping into
by Earth’s surface, by clouds, and from the Sun, convert it into thermal space. (8.6)
by some gases in the atmosphere energy, and then emit lower-energy • The greenhouse effect is a natural
before being all re-emitted back out infrared radiation. (8.4) process that keeps Earth’s surface
into space. (8.3) • Landforms and large bodies of and atmosphere warmer than they
• The amount of energy per unit of area water influence climate. (8.4) would otherwise be. (8.6)
reaching Earth is more intense near • Living things affect the composition
the equator than near the poles. (8.3) of gases in the atmosphere. (8.4)
Thermal energy is transferred Earth’s climate experiences Scientists use natural ice
within Earth’s climate system long-term and short-term cores, sediment layers,
through air and ocean changes. and tree rings to study past
currents. climates.
• Continental drift influences
• The atmosphere and the oceans are global circulation patterns in the • Proxy records are indirect measures
heat sinks. (8.8) atmosphere and oceans. (8.9) of Earth’s past climate. (8.11)
• Convection currents cause • The shape of Earth’s orbit, the tilt • Ice cores record temperature data
zones of high and low pressure, of Earth on its axis, and the wobble by trapping gases such as oxygen,
thereby circulating heat in the as Earth spins all influence Earth’s carbon dioxide, methane, and
atmosphere. (8.8) climate. These are thought to cause nitrous oxide. (8.11)
• Thermohaline circulation is the ice ages approximately every • Tree rings and coral reefs grow
main part of the conveyor belt that 100 000 years. (8.9) annual layers in proportion to how
circulates thermal energy in the • Volcanic eruptions and variations favourable the climate is. (8.11)
oceans. (8.8) in air and ocean currents cause • Sediment may contain evidence,
short-term changes in climate. (8.9) such as fossils and plant pollen, of
past climates. (8.11)

THINK NOW? weather (p. 319)
climate (p. 320)
You thought about the following statements at the beginning of bioclimate profile (p. 323)
the chapter. You may have encountered these ideas at school, climate system (p. 325)
at home, or in the world around you. Consider them again and ultraviolet radiation (p. 325)
decide whether you agree or disagree with each one. infrared radiation (p. 325)
thermal energy (p. 327)
atmosphere (p. 330)
hydrosphere (p. 333)
lithosphere (p. 334)
greenhouse effect (p. 338)
greenhouse gas (p. 339)
carbon sink (p. 339)
feedback loop (p. 340)
heat sink (p. 344)
convection current (p. 345)
1 About half the energy on Earth comes
from the Sun.
4 Earth’s climate has remained very
stable for thousands of years. thermohaline circulation
Agree/disagree Agree/disagree (p. 346)
ice age (p. 348)
plate tectonics (p. 348)
continental drift (p. 348)
interglacial period (p. 349)
El Niño (p. 352)
albedo (p. 355)
albedo effect (p. 356)
proxy record (p. 358)
2 The greenhouse effect is a natural

phenomenon.
5 Volcanic eruptions cause the climate
to change.
Agree/disagree Agree/disagree BIG Ideas
✓ Earth’s climate is dynamic
and is the result of
processes.
✓ Global climate change is
influenced by both natural
and human factors.
Climate change affects
Carbon dioxide is an important part of Weather and climate are the same
3 Earth’s climate system.
6 thing.
living things and natural
systems in a variety of
Agree/disagree Agree/disagree. ways.
People have the
responsibility to assess
How have your answers changed since then? their impact on climate
effective courses of action
to reduce this impact.

CHAPTER
REVIEW
8
What Do You Remember? 15. How can relatively small changes, such as a
small drop in the Sun’s radiation, cause large
1. (a) Define climate.
changes to Earth’s climate? (8.10) K/U
(b) List three climate zones. (8.1) K/U
16. (a) When Earth begins to warm up from an ice

2. (a) How is climate similar to weather? age, the ice begins to melt. Describe how the
(b) How is climate different from weather? (8.1) K/U
albedo of ice becomes important at this stage.
3. What are the four main components of the (b) Is the albedo effect a positive or a negative
climate system on Earth? (8.3, 8.4) K/U
feedback loop? Use a diagram to
explain. (8.10) K/U C
4. (a) What is a greenhouse gas?

17. Explain how tree rings are used as proxy
(b) List three greenhouse gases in addition to
records. (8.11) K/U
water vapour. (8.6) K/U
18. How do volcanoes influence the climate? (8.9) K/U
5. What are some of the causes of long-term

climate change? (8.9) K/U 19. Explain how clouds can be part of both positive
and negative feedback loops. (8.10) K/U
6. What are some of the causes of short-term

climate variations? (8.9) K/U
Solve a Problem
7. (a) What is a feedback loop? 20. Choose a city on the north shore of Lake Ontario
(b) Give three examples of feedback loops in (Figure 1). (8.4) K/U T/I
Earth’s climate system. (8.10) K/U
8. (a) What are proxy records?

(b) How are they useful to climatologists? (8.11) K/U
9. Describe two methods a climatologist could use

to collect climate data from the distant past. (8.11) K/U
Figure 1
10. (a) What is albedo? (a) Describe how Lake Ontario affects the
(b) What is the albedo effect? (8.10) K/U
climate in your chosen city.
(b) Explain how the Great Lakes can influence
What Do You Understand? the amount of snowfall in nearby regions
11. Describe one way in which each of the factors downwind.
below affects the climate of a region. (8.4, 8.8) K/U
21. Write a paragraph summarizing the role
(a) distance from a large body of water of Earth’s climate system and how it affects
(b) prevailing winds conditions on Earth. (8.3, 8.4) K/U
(c) land formations 22. (a) Compare how thermal energy circulates in
12. Draw a diagram to explain why the climate is the ocean with how thermal energy circulates
colder close to the North and South Poles than it in the atmosphere.
is at the equator. (8.3) K/U (b) Why is the circulation of thermal energy
around Earth important for living
13. Earth constantly absorbs energy from the Sun.
things? (8.8) K/U
Explain why Earth’s surface does not continue

heating up. (8.3) K/U 23. The Gulf Stream carries warm water past the
west coast of Europe. How would you expect this
14. Explain how the greenhouse effect works. (8.6) K/U
current to affect the climate of the west coast of
Europe? (8.8) T/I

24. Greenhouse gases trap energy in the atmosphere, Create and Evaluate
causing Earth to be warmer than it would be
27 . You are part of a team that has a long-term
without greenhouse gases. Use this fact to predict
assignment to determine the climate of an isolated
what might happen to Earth’s average temperature
region in the Himalayas. What measurements will
in each of the following scenarios: (8.6) T/I
you take, and for how long? (8.1) K/U T/I
(a) Greenhouse gas levels in the atmosphere

increase. 28. “Ozone is both a helpful and a harmful gas.”
Explain this statement. (8.4) K/U A
(b) Greenhouse gas levels in the atmosphere

decrease. 29. Yukon Territory has a dry climate with fewer
trees than other parts of Canada. You are a
25. (a) Suggest two difficulties that climatologists climatologist working in Yukon. You want to
might encounter when interpreting proxy find out what the local climate was like 6000
records to reconstruct climate. years ago. Develop a plan for collecting evidence.
(b) Identify one type of proxy record. Suggest What clues might you look for? (8.11) K/U T/I C
specific examples of difficulties scientists

might have. (8.11) K/U T/I
Reflect on Your Learning

26. Scientists sometimes use measurements of types 30. (a) What information in this chapter did you
of oxygen in coral to obtain climate data. The already know before reading it?
graphs in Figure 2 compare data of heavy and (b) What information in this chapter was
light oxygen ratios in two coral reefs (Tarawa completely new to you?
Coral and Galápagos Coral) with the rainfall (c) How might the new information that you learned
index. (8.11) T/I
affect how you think about Earth?
1940 1958 1973 31. (a) Before reading this chapter, how much did
300 you know about previous periods of global
250 Rainfall Index
Rainfall Index (mm)
200 warming and cooling?

150 (b) How has your knowledge changed since
100 reading this chapter?
50
0
Coral δ18O anomaly
Tarawa Coral –3
–2 Web Connections
–1
0 32. Suppose you want to move to a European city
1
Coral δ18O anomaly
–3
2
with a warm, moist climate. (8.4, 8.8) T/I
–2
–1 3 (a) Use maps and the information in this chapter
0 to identify a suitable city.
1 (b) Explain why you think the climate of that
2
3 Galapagos Coral city or town is warm and moist.
(c) Use the Internet to research the climate
1930 1950 1970 1990
of that city or town. Was your prediction
Year
Figure 2 correct? Explain.
33. Winter in the northern hemisphere has lower
(a) Do the data from the two coral reefs
average temperatures than winter in the southern
correspond? If they do, explain how.
hemisphere. Why might this be so? Examine a globe
(b) Do the coral reef data correspond to the rainfall
to see how the two hemispheres differ and how this
index? If they do, explain how. (Hint: Concentrate
might affect their respective climates and average
on the high and low points of the data.)
winter temperatures. Explain. (8.4, 8.9) T/I A
(c) Are these data useful as proxy data?

(d) Did you find it difficult to detect signals from To do an online self-quiz or for all
the data? Explain why or why not. GO TO NELSON SCIENCE

CHAPTER
SELF-QUIZ
8
For each question, select the best answer from the four 6. A positive feedback loop is defined as a process
alternatives. in which
1. Why is carbon dioxide considered a greenhouse (a) the result influences the original process.
gas? (8.6) K/U
(b) the result amplifies the original process.
(a) It destroys the ozone layer. (c) the result diminishes the original process.
(b) It traps radiation from Earth’s surface. (d) the result stops the process from proceeding.
(c) It is released by living things. (8.10) K/U
(d) It is needed for photosynthesis.

Indicate whether each of the statements is TRUE or FALSE. If
2. Which of the following phrases best describes a
bioclimate profile? (8.2) K/U
(a) a graph of the atmospheric conditions in a 7. Land near an ocean or large lake tends to be
location over a short period of time cooler in the summer than inland locations at
(b) an average of the weather in a certain region the same altitude. (8.4) K/U
over a long period of time 8. More energy is absorbed by Earth than is

(c) a series of graphs that show present and radiated by Earth. (8.3) K/U
future climate at a given location

(d) a climate zone based on landforms, soil, 9. Scientists use proxy records to directly measure
plants, and animals, as well as climate past temperatures. (8.11) K/U
3. Which of the following series orders greenhouse 10. Convection currents form because warm air
gases from highest to lowest in effectiveness? tends to rise and cold air tends to sink. (8.8) K/U
(8.6) K/U
(a) nitrous oxide, methane, carbon dioxide Copy each of the following statements into your notebook. Fill
(b) carbon dioxide, methane, nitrogen dioxide in the blanks with a word or phrase that correctly completes
(c) carbon dioxide, methane, nitrous oxide the sentence.
(d) methane, carbon dioxide, nitrous oxide 11. An ecoregion describes the ______ and ecology
4. A weather description states: “a high of 35 °C of a region in its current state. (8.2) K/U
today, sunny with cloudy periods, a 30 % chance 12. Climate is the average of the ______ in a region
of precipitation, wind from the west at 25 km/h, over a long period of time. (8.1) K/U
and relative humidity of 45 %.” Which of the

following describes the amount of water in the air 13. Ice cores, tree rings, fossils, and coral reefs are
in relation to the maximum amount that the air examples of ______. (8.11) K/U
can possibly hold at that temperature? (8.1) K/U

14. The greenhouse effect occurs when _______
(a) 30 % chance of precipitation absorb _______ emitted from Earth’s surface
(b) wind from the west at 25 km/h and radiate it, heating Earth’s surface and the
(c) relative humidity of 45 % atmosphere. (8.6) K/U
(d) a high of 35 °C
15. The continuous flow of water in the world’s
5. Scientists believe that Earth’s slow wobble on its oceans is called _________. It is caused by
axis, its orbital shape, and changes in the tilt of differences in water ______ and _______.
its axis result in (8.8) K/U
(a) the slow movement of plates in the lithosphere.

(b) the uplift of new mountain ranges.
(c) cyclical changes in the Sun’s energy output.
(d) long-term cycles in climate. (8.9) K/U

Match each term on the left with the most appropriate 22. Explain how each of the following would affect
description on the right. the land near which it passes: (8.8)T/I
16. (a) atmosphere (i) includes solid rock, soil, (a) a warm Gulf Stream current
and minerals of Earth’s (b) a cold ocean current
crust
23. Climate system is defined as the complex set
(b) hydrosphere (ii) layer of the atmosphere of components that interact with each other to
where ozone absorbs produce Earth’s climate. Write a definition of
ultraviolet radiation “climate system” in your own words. (8.3, 8.4) C
(c) stratosphere (iii) includes all water on and

around Earth 24. Ozone in the stratosphere protects us from
(d) lithosphere (iv) layers of gases surrounding dangerous ultraviolet radiation. (8.4) T/I
Earth (a) Explain how the ozone is affected by the use

(e) troposphere (v) layer of the atmosphere of products that release CFCs?
where ozone has a toxic (b) Is stratospheric ozone concentration
effect (8.4) K/U
increasing or decreasing? What brought
about this change?
25. Earth continuously absorbs energy from the
17. Why is the greenhouse effect described as an Sun and yet Earth stays at a relative constant
“energy trapping” process? (8.6) K/U
temperature. Explain how this occurs. (8.3) T/I
18. In addition to the atmosphere, hydrosphere, 26 Would a significant increase in carbon dioxide in
and lithosphere, living things are important the atmosphere have a positive or negative effect
components of Earth’s climate system. (8.4) K/U T/I
on the populations of polar bears and seals that
(a) How do living things affect Earth’s climate live in the Arctic? Explain why. (8.6) A
system?
27. Scientists are concerned about current changes
(b) Name two processes that organisms use to
in climate. (In Chapters 9 and 10, you will
absorb gases from and release gases to the
learn about current climate change.) Use your
atmosphere.
understanding of past climate to explain why a
19. Paraphrase the following statement: “Climate is what change in climate would affect all living things
you expect, but weather is what you get.” (8.1) C
on Earth. (8.9) A
20. The climate system transfers energy around the

globe. (8.8) K/U
(a) Explain why energy transfer is important.

(b) How is energy transferred in the
atmosphere?
(c) How is energy transferred in the oceans?
21. Many parts of the climate systems are controlled
and influenced by feedback loops. (8.10) K/U
(a) Water vapour and temperature are involved

in both positive and negative feedback loops.
Using a diagram, explain how this can be so.
(b) Explain how the albedo effect is part of a
feedback loop.

CHAPTER
9 Earth’s Climate:
Out of Balance
KEY QUESTION: What is causing the changes

in Earth’s global climate?
Now the glacier

ends here.
1939
The Angel Glacier in Jasper National Park
has retreated since 1939 (inset).
368 Chapter 9 • Earth’s Climate: Out of Balance NEL

UNIT D
Climate Change
Earth’s Climate Earth’s Climate: Addressing and

KEY CONCEPTS
We have evidence that Human activities have The increase in greenhouse

our climate is changing. increased atmospheric gases is causing the
levels of greenhouse gases. anthropogenic (human-
caused) greenhouse effect.
Average Global Temperature Global Average Temperatures

during the 20th Century
Scenario 1: Ex
temperature r
1.0 natural chang
0.5 Scenario 2: Ex
temperature r
activity is influ
0.0
Actual temper
1900 1950 2000

Year
80 1910 The1940
anthropogenic1970 2000 The largest sources of Scientists use climate
Year
greenhouse
Annual meaneffect is the greenhouse gases in models to figure out how
main cause of today’s Canada are the production different factors affect our
climate change. and burning of fossil fuels. climate.

ENGAGE IN
ARCTIC
SCIENCE Alaska
OCEAN
(U.S.A.)
BANKS
ISLAND
YUKON
Whitehorse
NORTHWEST
TERRITORIES NUNAVUT
Yellowknife
BRITISH
FigureCOLUMBIA
1 Banks Island is in the Northwest Territories.
ALBERTA
Amaruq lives in a small community located on the coast After a while, Amaruq wanders off to talk to a couple
of Banks Island, in the Arctic (Figure 1). He and his family of his friends. “Do you really think the climate is different
live in a small house overlooking the ocean (Figure 2). now?” he asks his best friend, Meeka. “The elders always
In the spring, Amaruq and his family travel to their summer say things were betterC09-F18-UCOS10SB.ai
when they were young!”
camp to hunt, fish, and gather berries. When Amaruq’s family “Yes, I’ve noticed changes in the last few years,” agrees
gathers with other families, the elders compare this year’s Meeka. “Remember when the schoolhouse had to be
conditions with those of past seasons (Figure 3). moved? The permafrost under the building melted, and the
“It’s not as cold as it was when I was younger,” says foundations started to sink. It’s never been warm enough for
Tulugaq, speaking in Inuktitut. “It wasn’t so long ago that that to happen before. Last month a scientist came to talk to
the sea ice filled the harbour. All we had to do was paddle the elders about our climate.”
a few strokes out to hunt seals at the blow holes! There “Yeah!” chimes in Irniq. “It’s definitely getting warmer.
isn’t as much sea ice now.” We’re starting to get animals from the south on the island!
“That’s right,” his sister Elisapee agrees. “This fall, there My dad caught a salmon in the river this summer. My
was less ice, and it was far outOntario
in the ocean. It took
Science 10 aSBlong grandpa says salmon have never been this far north before.”
time for my son and the other hunters to reach
0-17-635528-6 the seals.” On the way home, Amaruq thinks about what he has
Amaruq’s father agrees withFN the elders. “ThereC09-F18-UCOS10SB
isn’t as heard. He wonders whether the climate is really different
much ice this winter either,” heCO says. “I was almost trapped
Crowle now from what it used to be.
Art Group
by thin ice just a bit north of town. It’s getting dangerous to
Deborah Crowle
travel. You can’t trust the ice toPass
be thick enough anymore.”
1st pass 1. What evidence did Amaruq’s family and
Amaruq’s mother reminds everyone
Approved about last spring: friends use to infer that the climate is
“We usually drive on the frozenNot river north of town, but it
Approved changing? Is this evidence scientific?
had already melted!” 2. How are Inuit lifestyles changing? Are the
changes in lifestyle related to the changes in
Arctic ice?
Figure 2 Amaruq lives in a typical Arctic community. Figure 3 The elders remember a time when the snow cover
lasted much longer.
WHAT DO YOU
THINK?
1 Today’s changes in climate are similar to changes that

occurred in the past.
4 Climate change will have both negative and
positive effects.
2 Increased atmospheric carbon dioxide is mainly due to

human agriculture practices around the world.
5 Changes to Earth’s climate can be reversed by changing
human activities.
3 Scientists can predict exactly how the climate will change

in the future.
6 The burning of fossil fuels in heating, transportation,
and industry is the greatest cause of greenhouse gas
Agree/disagree? production in Canada.
Agree/disagree?

FOCUS ON
READING
Summarizing
When you summarize a text, you shorten it by restating only the main idea
and key points in your own words. Specific facts, examples, and questions
are not included. Use the following strategies when summarizing a text:
• determine the main idea and key points using text features such as
the title, headings, topic sentences, and signal words such as “thus,”
“therefore,” and “in other words”
reaDing Tip
• ignore words or details that do not expand your understanding of the
main idea
you develop literacy strategies. • use the same organizational pattern as the text uses (cause/effect,
concept/definition)
• replace several specific words with a general word
Melting Glaciers, Ice Sheets, and Sea Ice

Over the last few decades, the average size of glaciers all over the world
has begun to decrease as global temperature has risen (Figure 1). As you
saw in the chapter opening, we can compare old photographs of glaciers
with what they look like now. Many glaciers are much smaller now than
they used to be.
The water from melting glaciers runs through rivers and lakes to
Figure 1 Global increases in average the ocean. Nearly half the people around the world, including people
temperature for 2001 to 2005, compared
with the 1951 to 1980 average.
in China and south Asia, depend on glaciers for their water. If glaciers
Temperatures are continuing to rise. disappear, serious water shortages could occur around the globe.
Summarizing in Action
A summary is a shorter version of a longer text. The key to summarizing
is paraphrasing, which means using your own words to restate the main
idea in the original text. Rewording the original text is crucial. Identify
the main idea for the summary and briefly highlight the key points that
support the main idea. Eliminate unimportant or redundant information.
Here is how one student used the strategies to summarize the selection
about melting glaciers.
Clues Unimportant Words Text Pattern Replacement Words
The title suggests heat is “Over the last few Cause/Effect Use “Many people”
causing ice to melt. decades” to replace “including
people in China and
Glaciers supply water for half “As you saw in the south Asia.”
the people on Earth. chapter opening”
No glaciers = water shortages
Summary: Global warming has caused glaciers to melt. Many people depend on glaciers
for their water supply. Reduced glaciers means reduced water supply globally.

Evidence of a Changing Climate 9.1
In Chapter 8, you learned how Earth’s
climate works and how scientists study
past climate. Today, Earth’s climate is
being discussed around the world. Why?
Scientists who study climate believe that
Earth’s climate is changing again—and that
this time the change is happening because
of human activities.
Scientists have observed changes in
Earth’s climate system. Most of these
changes are things that have not happened
for thousands of years. For example, ice
that has remained frozen on Earth’s surface
for thousands of years is beginning to melt
(Figure 1). Changes like this are symptoms
of global changes in Earth’s climate. Many
climatologists, glaciologists, and biologists
are measuring and analyzing evidence of
climate change. In this section, you will
examine the evidence we have that Earth’s Figure 1 Between February 28 and March 6, 2008, a 405 km2 section of the Wilkins
climate is changing. Ice Shelf collapsed. The rest of the 14 000 km2 ice shelf is showing signs that it could
disintegrate and pull away from Antarctica.
Rising Temperatures
One of the main ways scientists can tell that the climate is changing is by
studying past temperature records. Weather stations have recorded daily
temperatures and other weather data around the world since the late 1800s.
Scientists use these records to calculate Earth’s average temperature each
year going back more than 100 years.
This historical record shows that the average temperature goes up and
down from year to year but also shows long-term trends. Earth’s average
temperature rose from 1910 to 1940, stayed relatively even from 1940 to To find recent data on Earth’s
1970, and has continued to rise since then (Figure 2). By 2006, 11 of the average global temperature,
previous 12 years were the warmest ever recorded. GO TO NELSON SCIENCE
0.6 Learning Tip

Temperature Anomaly
0.4
Climate change graphs show
0.2 “temperature anomaly” on the
y-axis. Temperature anomaly is the
0.0
difference between a long-term
–0.2 average temperature and the data
point. A temperature anomaly of
–0.4
+0.1 °C means that the data point
1880 1910 1940 1970 2000 is 0.1 °C above the average
Year temperature.
Annual mean
Figure 2 Earth’s average temperature has generally increased from 1880 to 2006.
The data were collected from all over Earth’s surface.
NEL 9.1 Evidence of a Changing Climate 373

In Canada, average national temperatures have increased by 1 °C in the
last 55 years. Over the western and northern parts of the country, average
temperatures have risen even more. Average temperatures have increased by
as much as 2.5 °C in some parts of Yukon.
Figure 3 shows changes in global temperatures by comparing the
long-term average temperatures (between 1951 and 1980) with temperatures
between 2001 and 2005. The dark red areas have the highest increases
in temperature. Notice that these areas are concentrated over land in the
northern hemisphere. A few places in the southern hemisphere, particularly
over the oceans, show temperature decreases.
Figure 3 Global increases in average temperature for 2001 to 2005, compared with the 1951 to
1980 average. Temperatures are continuing to rise.
Melting Glaciers, Ice Sheets, and Sea Ice

Over the last few decades, the average size of glaciers all over the world has
The scientists who study begun to decrease as the global temperature has risen. As you saw in the
glaciers are called “glaciologists.”
To find out more about chapter opening, we can compare old photographs of glaciers with what
glaciologists’ work, they look like now. Many glaciers are much smaller now than they used
GO TO NELSON SCIENCE to be.
The water from melting glaciers runs through rivers and lakes to the
ocean. Nearly half the people around the world, including people in China
and south Asia, depend on glaciers for their water. If glaciers disappear,
reaDing Tip serious water shortages could occur around the globe.
Paraphrasing Ice sheets covering the expanses of Greenland and Antarctica are also
Paraphrasing is restating an idea in melting. Twice as much of Greenland’s surface ice sheet is now melting
your own words in your own way. Avoid each summer, compared with 15 years ago. In Antarctica, snow is now
reusing the author’s words. Pretend melting much farther inland and at higher altitudes than ever recorded. In
you are explaining the idea to someone
Figure 1 (on the previous page), you saw that an ice shelf in the Antarctic is
who does not understand the original
text. Use words that you understand to beginning to disappear.
capture the meaning of the original text. Arctic sea ice is also disappearing. An area of sea ice equivalent to
Ontario and Quebec together disappeared from the Arctic Ocean in
September 2007 (Figure 4, next page). Much of the ice re-formed during
the next winter, but summer ice continues to decrease dramatically.
To view an animation of the change in
Scientists estimate that the Arctic could be entirely ice-free in the summer
sea ice coverage in the Arctic, within just a few years. You will learn more about the extent of sea ice in
GO TO NELSON SCIENCE Activity 9.2.

(a) (b)
Figure 4 These satellite images show decreases in sea ice between (a) September 1979 and
(b) September 2007. This month holds the record for the smallest area of sea ice in the Arctic,
at the time of publication, since records were first started in 1979.
Rising Sea Level

Global sea level has risen significantly over the past 120 years. Since 1993,
the sea level has been rising almost twice as fast as during the previous 30
years. Even small increases in sea level can result in devastating floods in
low-lying countries such as the islands of Tuvalu in the South Pacific.
T RY THIS CaLCULaTe Sea LeVeL riSe

SKILLS: Analyzing, Evaluating SKILLS HANDBOOK
3.B.7., 6.B.
Global average temperature and sea level have changed since the B. Estimate the rise of global average sea level over the same
late 1800s (Figure 5). Use these data to answer the questions. time period. T/I
Equipment and Materials: calculator C. Can you use these two graphs to show that sea level rise
may be connected to climate change? Explain why or why
1. Examine the two graphs in Figure 5.
not. What other data do you think you might need to prove
A. Estimate by how much the global average temperature has that the two are linked? T/I C
risen over the past 150 years. T/I
Global Average Temperature Global Average Sea Level
0.5 14.5 50
Difference from 1960–1990
Difference from 1960–1990

average value (mm)
average value (°C)
Temperature (°C)
0.0 14.0 –50
–100
–0.5 13.5 –150
1850 1910 1970 1850 1910 1970

(a) Year (b) Year
Figure 5 Changes in (a) global average temperature and (b) global average sea level.

Learning Tip When glaciers and ice sheets on land melt, water runs into the oceans,
What Happens When Floating causing the sea level to rise. This melting may explain why sea level rise is
Ice Melts? accelerating. If the Greenland Ice Sheet melted completely, it would raise the
Floating sea ice and icebergs have global sea level by about 7 m (Figure 6). This is unlikely to happen in the
little effect on sea level when they melt
near future, however. So far, not enough glaciers and ice sheets on land have
because they already displace water
when they float. If you float an ice cube melted to account for most of the observed rises in sea level. What other
in a glass of water, the water level will factor can be causing sea levels to rise?
not change after it melts.
Figure 6 A huge volume of water

is stored as ice that covers most of
Greenland.
Thermal Expansion and Sea Level Rise

thermal expansion the increase in the Water expands slightly when it warms up. This is known as thermal expansion.
volume of matter as its temperature Scientists believe that thermal expansion has been responsible for much of the
increases
rise in sea level over the past 120 years. The thermal expansion of water is very
small, but since the oceans are so deep, it is enough to make a difference. You
will see this phenomenon in Activity 9.3.
Another Reason for Sea Level Rise?

Canadian scientist Richard Peltier is one of the world’s pioneers in
understanding the effect of climate change on sea level rise (Figure 7).
Peltier continues to be puzzled by rising sea levels around the world.
Scientists know that sea levels are rising due to thermal expansion and
melting land ice. However, these two explanations do not fully account
for all sea level rise. Professor Peltier thinks the additional water may be
coming from North America, where the levels of groundwater have dropped
substantially. Alternatively, ice in Greenland or Antarctica may be melting
faster than we thought.
In 2008, Peltier was awarded the Milutin Milankovic Medal by the
European Geosciences Union in recognition of his work. He presently directs
the Centre for Global Change Science at the University of Toronto. His team
Figure 7 Richard Peltier of scientists uses a supercomputer system to study past climate changes.

Changes in Severe Weather reaDing Tip
Certain types of severe weather events, such as heat waves and hurricanes, Supporting Details
Details like facts, reasons, and examples
are becoming more intense (Figure 8). A heat wave swept across Europe
are used to support the main idea.
in the summer of 2003. That summer was one of the hottest ever recorded. They help the reader understand
Thousands of people died from heat-related causes. Hurricanes have the main idea by saying something
also become stronger over the past 50 years, fuelled by warmer ocean specific about it that the reader may
temperatures. The number of category 4 or 5 hurricanes (winds of 178 to already know or be able to visualize. An
example of supporting details is “such
249 km/hr) per year has nearly doubled over the last 40 years.
as heat waves and hurricanes.” When
summarizing a text, it is better not to
Changes in Precipitation Patterns include supporting details.
In the northern hemisphere, more precipitation is falling as rain and less as snow.
There are more heavy precipitation events such as rainstorms and snowstorms.
The total annual precipitation is increasing in northern Canada. Southern Africa,
the Mediterranean, and southern Asia, however, are becoming drier (Figure 9).
As you know, precipitation is one of the main factors used to identify the climate
of a region. Changes in precipitation point to changes in climate.
Figure 9 The water level in the Ganjiang River in China is dropping. Figure 8 The heat wave in Melbourne,
Australia, in early 2009, caused rail lines
Changing Seasons to expand and bend.
Seasons in Canada and in other parts of the world are gradually changing. reaDing Tip
The amount of snow that remains on the ground in winter is decreasing Summarizing
throughout the northern hemisphere. The frequency of very cold days has When summarizing, find ways to
been decreasing worldwide. Very cold days and frosty nights are coming condense the original text. “Very cold
later in the year and ending earlier in the spring. As a result, many regions days and frosty nights” can be reduced
from six words to two: “Cold weather.”
are experiencing longer growing seasons.
Sometimes several specific words
can be replaced by a general word or
Changes in Ecosystems phrase. For example, “telephone, radio,
Plants and animals are responding to the changes in temperature and and Internet access” can be changed to
precipitation. Trees, shrubs, and other plants across North America are “communication media.”
flowering earlier in the spring. Animals such as squirrels are breeding earlier
in the year. Climate scientists can track these changes as evidence that
climate change is occurring.
Animal and plant communities are slowly migrating toward the poles and
to higher altitudes as their regions warm up. Unfortunately, this means that
undesirable insects and plants are also moving north into new regions. The
mountain pine beetle has moved into areas of British Columbia where, in
the past, it has been too cold for the beetle to survive.

RESEARCH THIS iS CLiMaTe CHange aLWaYS BaD?
SKILLS: Researching, Analyzing the Issue, Defending a Position, Communicating, Evaluating SKILLS HANDBOOK
4.A., 4.C.
Most discussions of climate change give the impression that the A. Analyze and prioritize each item on your list of positive and
impacts of climate change will always be negative. However, there negative impacts as to its importance and potential effect. T/I
may also be some positive impacts.
B. Write a conclusion to your research. Describe the positive
1. Select one aspect of climate change from the list below. and the negative impacts of the aspect of climate change
Brainstorm negative and positive impacts that could result. that you selected. T/I A C
Consider social, environmental, and economic impacts. Think
short-term and long-term impacts. Research the issue on the C. Make a recommendation to “The Organization of
Internet and in the library. Discuss it with friends and family. Students Concerned About Climate Change.” You could
• warmer temperatures present your recommendation as a written paper, as a video
• reduction of Arctic sea ice submission, in person, or in another format approved by your
• rising sea level teacher. Defend your recommendation with good arguments.
• changing rainfall patterns Evaluate whether the impact you studied is likely to be very
important, moderately important, or not important for the
GO TO NELSON SCIENCE future of people and ecosystems. C A
UNIT TASK Bookmark

You can apply what you learned in this section about evidence for climate change to the
Unit Task described on page 444.
in SUMMARY
• Most of the changes that we are currently seeing • The extent of Earth’s glaciers, sea ice, and ice
in the climate system have not happened for sheets has decreased over the past few decades.
thousands of years. • The rate of sea level rise is increasing.
• Earth’s average temperature has been rising • Temperature and precipitation patterns are
steadily for the past 50 years and overall for the changing, as well as the distribution of many
past 100 years. plant and animal species.
CHECK YOUr Learning

1. For each of the following topics, write one observed 4. (a) What are two possible causes of sea level rise?
symptom of a changing climate. Which symptoms do (b) If the sea level has risen by 20 cm over the past
you think are the most convincing that Earth’s climate is century on the coast of North America, by how much
definitely changing? K/U do you think it has risen over the past century on the
(a) ecosystems (d) glaciers and ice sheets coast of India? Explain. K/U T/I
(b) sea level (e) hurricanes 5. (a) State one positive and one negative effect of climate
(c) growing seasons (f) precipitation change for Canada.
2. Some people think that observed changes are just the (b) State one positive and one negative effect of climate
usual year-to-year variations. They remember the 1930s change for a country closer to the equator, such as
and 40s, when winters were so mild and dry that they India. K/U A
rode scooters on the streets of Toronto. How would you
6. Why are insect and plant pests becoming more of
respond to them? K/U C
a problem in northern latitudes? K/U
3. People who live in valleys below melting glaciers have
7. Describe two problems that are caused by melting
more drinking water available than 30 years ago. In the
glaciers and polar ice. K/U
future, however, they will have less drinking water available
than 30 years ago. Explain why this may happen. T/I

TECH ConnEct OSSLT
Using Satellites to Monitor Earth

Any object that orbits a larger object is called a satellite. For RADARSAT-2
example, the Moon is a natural satellite that orbits Earth. Since In December 2007, RADARSAT-2 was launched to continue
1957, humans have been launching artificial satellites to orbit monitoring the environment and natural resources. RADARSAT-2
Earth. Canada was the third country to launch an artificial satellite, circles Earth every 100 minutes with a different circle each time
after the Soviet Union and the United States (Figure 1). and revisits the same spot on Earth every 24 days.
Images from RADARSAT-2 show a difference between
open water and various types of ice (Figure 2). This will make
it easier for scientists to monitor changes in Earth’s ice cover
over time.
Figure 1 The Alouette 1, launched in 1962, was Canada’s first satellite.
Artificial satellites provide service for telephones, radio, Internet

Iqaluit
access, TV, and navigation. Today, many different types of artificial
satellites are orbiting Earth. Some examples include the following:
• Earth observation satellites that monitor environmental
conditions such as temperature, ice cover, forests, and
volcanic eruptions
• communication satellites that transmit telephone
conversations
• broadcasting satellites that broadcast radio and television
programs
• navigational satellites that help airplanes and ships navigate
• weather satellites that take photographs and radar images of
weather systems
Satellites Monitoring Climate Change

RADARSAT-1
The Canadian Radio Detection and Ranging Satellite 1
(RADARSAT-1) is one of the Canadian satellites used to conduct
scientific research. It was launched in 1995. RADARSAT-1
RADARSAT-2 Data and Products © MacDonald, Dettwiler and Associates Ltd. (2008)
monitors glaciers, polar ice caps, and permafrost, among other
- All Rights Reserved. RADARSAT is an official mark of the Canadian Space Agency.
environmental conditions. For example, images from RADARSAT-1
Figure 2 This RADARSAT-2 image shows the community of Iqaluit,
are used to measure the flow of glacier ice into oceans. These next to Frobisher Bay, which is mostly covered by ice. Note the Iqaluit
images have helped scientists determine that Earth’s ice is melting airport runway to the north of the city. The resolution is 8 m.
at an increasing rate, raising concerns about future sea level rise.
NEL 379
Analyzing Sea Ice Extent for SKILLS MENU

Evidence of Climate Change Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
Canadians are asking questions about changes in the amount (or extent) Controlling Variables Communicating
of sea ice in the Arctic (Figure 1). Will it become easier for ships to
travel along Canada’s north coast? How will changes in sea ice extent
affect the polar bear population?
Every year, sea ice increases (maximum sea ice extent) and decreases
(minimum sea ice extent) depending on the season (Figure 2). In this
activity, you will analyze data to see whether the maximum or minimum
sea ice extent is changing.
Figure 1 Sea ice in the Antarctic, as well as

in the Arctic, is vulnerable to climate change.
It is an important habitat for many Antarctic
species, such as the emperor penguin.
(a) (b)
Figure 2 These images, created in (a) March and (b) September, 2008, show how Arctic sea ice
extent changes with the season. The pink line is the median ice edge between 1979 and 2000.
Purpose Procedure
SKILLS HANDBOOK
6.
To determine whether sea ice extent in the Arctic or 1. Prepare a data table similar to Table 1. There
Antarctic is changing over time. should be enough rows to collect data up to the
present year.
Equipment and Materials Table 1 Maximum and Minimum Sea Ice Extent in the
• Internet access or data for sea ice extent Arctic and Antarctic
• electronic spreadsheet and graphing calculator Arctic Antarctic

(optional)
March September February September
• graph paper (2 pieces)
1979
(a) (b) 1980

1981

2. Examine online maps of sea ice extent in the (i) The Environment Canada website provides
Arctic and the Antarctic since 1979. Your teacher further data on Arctic ice. To obtain ice thickness
will give you instructions for locating the latest data to answer the following questions, go to the
data at the National Sea Ice Data Centre. Nelson Science website. It will direct you to the
Environment Canada website. T/I
3. Record the data for sea ice extent from the maps
onto your data table. (i) What is the average thickness of the sea ice
in Canada’s Arctic?
SKILLS HANDBOOK
Analyze and Evaluate 3.B.7., 6. (ii) What has been happening to the thickness
(a) On a single graph, plot your maximum and of the Arctic sea ice?
minimum sea ice extent data for March and (j) How does ice in the Arctic and Antarctic help
September in the Arctic and for September and keep Earth cool? K/U
February in the Antarctic. Put the year across the (k) In September, 2008, a group of Canadian high
x-axis and the sea ice extent (millions of km2) on school students travelled to the Arctic. They
the y-axis. C
were part of an expedition looking for evidence
(b) How has the maximum sea ice extent in the of climate change (Figure 3). Go online to learn
Arctic changed since 1979? T/I about their experiences and discoveries and
how they are using what they learned. Write a
(c) How has the minimum sea ice extent in the
one-page summary of their activities. T/I C
Arctic changed since 1979? T/I
(d) Write a short summary describing how sea
ice extent in the Arctic and the Antarctic has
changed since 1979. T/I C
(e) Do the results of this activity support the idea

that Earth has been warming up over the past
few decades? T/I
(f) If you were skeptical about climate change,

how might you use these data to support your
position that we cannot be sure that long-range
warming of Earth is taking place? T/I A
SKILLS HANDBOOK
Apply and Extend 3.B.8., 4.B.
(g) In this activity, you worked with maps made

from satellite photographs. What other data
would you want to know to further support or
test your conclusions? T/I
Figure 3 Canadian students exploring the Arctic

(h) How might the continued reduction of the
polar ice cap influence transportation and
shipping? A C
UNIT TASK Bookmark
You can apply what you learned about changing ice cover to
the Unit Task described on page 444.

Thermal Expansion and Sea Level SKILLS MENU

The sea level around the world has been slowly rising over the past Hypothesizing Observing
century. (Remember the Try This: Calculate Sea Level Rise in Section Planning Evaluating
9.1.) Sea level rise is caused by runoff from melting glaciers, ice caps, Controlling Variables Communicating
and ice sheets and from thermal expansion of the oceans as they warm.
Most of the media’s attention is focused on the first reason. The second
reason, however, may be more important in explaining what has
happened over the last hundred years. In this activity, you will measure
the thermal expansion of water.
Purpose Procedure
To model the effect of thermal expansion of water on 1. Create a table similar to Table 1 (next page) in
sea level. your notebook.
SKILLS HANDBOOK
1.B., 2.E.
• eye protection 3. Push the clear plastic tubing into the unused
• lab apron hole of the stopper. Leave about 20 cm of tubing
• two-hole stopper with an alcohol thermometer outside the flask for the water to expand into.
pushed through one hole and the other hole 4. Fill a large cup or 500 mL beaker with enough
left open cold water to fill the flask. Use ice cubes to adjust
• clear plastic tubing the temperature to approximately 10 °C. (To
• 500 mL beaker or large cup make it easier to see the water when it expands
• Erlenmeyer flask (125 or 250 mL) into the clear tubing, you could add a few drops
• ruler of food colouring.)
• hot plate 5. Fill the Erlenmeyer flask with the cold water
• wire gauze (no ice) almost to the brim. Push the rubber
• utility stand and clamp stopper firmly into the neck of the flask until it
• safety gloves is watertight. Some water may spill out, which
• 50 or 100 mL graduated cylinder is not a problem. Water will rise partway up the
• 100 cm length of tubing, identical in diameter to tubing. Make sure that the initial level of the
that used in the above flask water in the tubing is visible above the stopper.
• 10 mL graduated cylinder 6. Read the initial temperature of the water in the
• large second thermometer (if necessary) flask. Record all observations in your table.
• water
7. With a ruler, measure the initial height of the
• 2 ice cubes
water level in the tubing outside the flask.
• food colouring (optional)
Be careful not to touch any hot pieces of equipment. Never
touch the hot plate when it is on.
Wear eye protection to protect against spills of hot water.
When you plug the hot plate into the electric socket, make
sure everything is dry.
When you unplug the hot plate, do not pull on the cord; pull
the plug itself.
Table 1 Measurements Taken During the Activity
Change in water temperature Initial temperature: ____ °C Final temperature: ____ °C Temperature change: ____ °C
change of water level in tubing (above stopper) initial level: _____ cm final level: _____ cm change in level: _____ cm
volume of water in flask _____ mL
volume of water needed to fill 100 cm of _____ mL

tubing
8. Place the flask on a wire gauze on a hot plate (b) Estimate the thermal expansion of the ocean by
(Figure 1). Clamp the flask to the utility following these steps: T/I
stand. When the temperature has risen by (i) By how many centimetres did the water
approximately 10 °C (i.e., from 10 °C to 20 °C), expand up the tube when it was heated?
remove the flask from the hot plate using safety (ii) Use your measurement of the volume of
gloves. Measure the new level of water in the water in 100 cm of tubing to calculate how
clear tubing. At approximately the same time, much the water expanded in mL.
measure the final temperature of the water in the
(iii) Use the total volume of the flask to express
flask.
the volume of expansion as a percentage. By
thermometer what percentage did the water expand?
60 ˚C
plastic (iv) To find the percentage expansion per degree
tubing Celsius of temperature change, divide your
0 ˚C stopper answer to (iii) by the temperature change.
Erlenmeyer
flask
(v) The ocean’s average temperature has risen
by approximately 0.375 °C over the last
water
hundred years. Use this value to estimate
wire gauze by how much the ocean water might have
expanded in items of percentage increase.
hot plate
(vi) Use the percentage increase calculated in
(v) to estimate by how much the sea level
might have risen with a 0.375 °C temperature
Figure 1 Experimental set-up increase. The average depth of the ocean is
3 740 m.
9. Carefully remove the stopper from the top of the (c) Note any obvious sources of error in your
flask without spilling water. Use a 50 mL calculation of thermal expansion. T/I
graduated cylinder to measure the volume of

water that was in the flask. (This volume should Apply and Extend
be a little more than the volume printed on the (d) What can you conclude about the effect of the
side of the flask.) thermal expansion of water on sea level? T/I
10. To find out how much water the tubing can hold (e) Refer back to Figure 5(b) on page 375. T/I
per centimetre of length, take 100 cm of tubing

(i) By how many centimetres has the sea level
and fill it with water. Then empty the water from
risen over the past 100 years?
the tubing into a 10 mL graduated cylinder.
Record the volume in Table 1. (ii)According to your results in this activity, how
much of this rise can be accounted for by
thermal expansion?
SKILLS HANDBOOK
Analyze and Evaluate 3.B.7., 5.D.1.
(a) Did the water in the flask change in volume

when you heated it? How do you know? T/I C

9.4 Greenhouse Gases: Changing the Climate
Greenhouse gases have been part of our atmosphere for hundreds of
thousands of years. Over the past 200 years, however, the atmospheric levels
of most greenhouse gases have increased (Figure 1).
Concentrations of Greenhouse Gases from 0 to 2000

400 2000
1800
CO2 (ppm), N2O (ppb)

Carbon Dioxide (CO2)
Methane (CH4) 1600
350
CH4 (ppb)
Nitrous Oxide (N2O) 1400
1200
Figure 1 Atmospheric concentrations of 300
important long-lived greenhouse gases 1000
over the last 2000 years. Increases 800
since about 1750 are attributed to 250 600
human activities in the industrial era. 0 500 1000 1500 2000
Year
We know that humans produce greenhouse gases by the combustion of

fossil fuels in energy-production, transportation, and industry. But how do
we know that the gases we produce end up in the atmosphere, and are not
absorbed by oceans and forests?
Scientists have studied both natural and human sources of greenhouse
gases. For example, they have studied the flow of carbon through the carbon
cycle to determine where human-produced carbon dioxide ends up. These
studies show that about half of human-produced carbon dioxide ends up in
the atmosphere, causing an increase in atmospheric carbon dioxide.
Based on studies like these, scientists conclude that the increase in
greenhouse gases in the atmosphere is due to human activities. The
additional amount of human-produced greenhouse gases is called
anthropogenic resulting from a human “anthropogenic greenhouse gases.”
influence
Anthropogenic Sources
of Greenhouse Gases
The principal anthropogenic greenhouse gases are carbon dioxide, methane,
nitrous oxide, and chlorofluorocarbons (CFCs).
Carbon Dioxide (CO2)

Carbon dioxide is the most significant greenhouse gas produced by humans
today. Burning fossil fuels (coal, gasoline, and natural gas) produces carbon
dioxide (Figure 2 on the next page). Fossil fuels are used for energy in
transportation, heating, electricity generation, and industry. In addition,
fossil fuels are used to provide energy for manufacturing.
Forests play an important role in determining how much carbon dioxide will
remain in the atmosphere. Trees take in carbon dioxide from the air and use it
in photosynthesis. The chemical equation for photosynthesis is shown below:
6 CO2 + 6 H2O + light energy → C6H12O6 + 6 O2
carbon + water + light energy → glucose + oxygen
dioxide
(a) (b)
Figure 2 The combustion of fossil fuels produces greenhouse gases.
A carbon dioxide molecule contains one atom of carbon and two atoms
of oxygen. The carbon atoms become part of new glucose molecules during
photosynthesis. (Glucose is a simple sugar.) The glucose is then made into
other compounds that form wood, leaves, and roots. Trees take in carbon
atoms from the atmosphere and store them in this new form. Therefore, as
long as a tree is alive, it is a carbon sink because it removes carbon from the
atmosphere and stores it.
About 10 % of our carbon dioxide emissions are due to deforestation,
mostly in tropical countries (Figure 3). Deforestation has two unwanted
effects. It stops the forest from absorbing carbon and releases some of the
previously absorbed carbon back into the atmosphere as carbon dioxide. How
does this occur?
When forests are cut down, the leftover forest waste decomposes. The
process of decomposition produces greenhouse gases, including methane and
carbon dioxide. Cutting down a forest causes the forest to become a source
of carbon instead of a sink. Furthermore, deforestation means that there are Figure 3 Deforestation releases
greenhouse gases.
fewer trees to absorb atmospheric carbon dioxide through photosynthesis.
Methane (CH4)
Methane emissions come from many sources. Agricultural activities such as
rice farming and cattle ranching produce methane (Figure 4). Methane is also
DID YOU KNOW?
produced from the decay of organic material in landfills and sewage treatment
Carbon Gluttons
plants. Coal mining and natural gas extraction release methane gas that was The number of carbon atoms stored in
trapped underground in fossil fuel deposits. Earth’s forests, smaller plants, soil, and
dead organic matter is greater than
the number of carbon atoms present in
the atmosphere as carbon dioxide gas.
Figure 4 The digestive systems of

cattle release methane.
NEL 9.4 Greenhouse Gases: Changing the Climate 385

Deforestation also results in methane emissions. Forests are often cleared
by burning. If the trees smoulder slowly, the combustion reaction produces
methane as well as carbon dioxide and water.
Nitrous Oxide (N2O)

About two-thirds of nitrous oxide emissions comes from the management of
livestock feed and waste. The rest comes from farmers using nitrogen fertilizers,
certain industrial processes, and, to a much smaller degree, fossil fuel use.
Chlorofluorocarbons (CFCs)
CFCs are commonly used as refrigeration agents. There are no natural
sources of CFCs. These gases leak out of refrigerators and air conditioners
or are released by industrial processes. Atmospheric levels of CFCs are now
decreasing because of international treaties, such as the Montréal Protocol
on Substances that Deplete the Ozone Layer.
Summary of Greenhouse Gas Concentrations

Concentrations of the major greenhouse gases have been increasing since
the start of the industrial age. You can see in Table 1 that atmospheric
concentrations of methane and nitrous oxide are much smaller than those
of carbon dioxide. However, methane and nitrous oxide molecules are
much more powerful than a carbon dioxide molecule in contributing to the
greenhouse effect.
Learning Tip Table 1 Concentrations and Lifetimes of Atmospheric Greenhouse Gases

Tiny Concentrations
Concentration in the atmosphere
Concentrations of greenhouse gases
in the atmosphere are very low Approximate
compared with concentrations of oxygen Greenhouse gas Pre-industrial level 2008 level atmospheric lifetime
and nitrogen. Scientists therefore use
carbon dioxide 280 ppm 384 ppm 100 to 1 000 years
different units for them: parts per million
(ppm), parts per billion (ppb), and parts methane 0.700 ppm (700 ppb) 1.785 ppm (1785 ppb) 12 years
per trillion (ppt). nitrous oxide 0.270 ppm (270 ppb) 0.321 ppm (321 ppb) 114 years
CFC-11 trace amounts 0.000251 ppm (251 ppt) 45 years
CFC-12 trace amounts 0.000525 ppm (525 ppt) 100 years
Data from IPCC Climate Change 2007: The Physical Science Basis and The NOAA Annual Greenhouse Gas Index
Anthropogenic Greenhouse Gases and

Global Temperature
We have evidence that concentrations of greenhouse gases are increasing. In
previous sections, you learned that global temperatures are also increasing.
But how do we know whether these changes are related?
Scientists compare data on Earth’s past climate with current data to
determine how anthropogenic greenhouse gases are affecting Earth’s climate.
(In Section 9.6, you will take a closer look at the scientific reasoning used
to conclude that humans are affecting Earth’s climate.) As part of these
Figure 5 Data from ice cores show studies, scientists have examined ice cores to collect data on greenhouse
how carbon dioxide concentrations have
gases stretching back nearly 800 000 years (Figure 5). In the following Try
changed over the past 800 000 years.
This, you will use ice core data to compare changes in greenhouse gases with
changes in Earth’s average temperature over 400 000 years.
T RY THIS COMParing CarBOn DiOXiDe COnCenTraTiOnS
WiTH gLOBaL TeMPeraTUre
SKILLS: Hypothesizing, Predicting, Analyzing, Communicating SKILLS HANDBOOK
3.B.8., 6.B.
In this activity, you will compare ice core data on carbon dioxide B. What is the lowest level of carbon dioxide in the atmosphere
with global temperatures over the past 400 000 years. over the past 400 000 years? T/I
Equipment and Materials: computer with Internet access and a C. Today, the concentration of carbon dioxide in the atmosphere
graphing program is 385 ppm and rising. Compare this value with your values
from parts A and B. What do you conclude? T/I
1. Write a hypothesis describing the relationship (if any) between
carbon dioxide concentration and global temperature. K/U C D. Compare your two graphs. Identify three times over the past
400 000 years when the temperature changed rapidly. T/I
2. Your teacher will direct you to the carbon dioxide data and
global temperature data online. Use a graphing program to E. What happened to the concentration of carbon dioxide at the
plot the two sets of data against time. If necessary, adjust the same three times identified above? T/I
y-axis scales so that the two graphs are about the same size. F. What is happening to the carbon dioxide concentrations
Make sure the x-axis scales are the same on both graphs. today? What is happening to global temperature? T/I
G. Summarize your findings about carbon dioxide
GO TO NELSON SCIENCE concentration, global temperature, and any correlation
between them. T/I C
A. What is the highest level of carbon dioxide in the atmosphere
over the past 400 000 years? T/I
In the Try This activity, you observed that changes in carbon dioxide Learning Tip
concentration closely match changes in global temperatures over the past Relationships between Variables
400 000 years. Your graphs do not prove that increases in carbon dioxide Two variables are correlated when
concentrations cause global temperature to rise. They also do not show that they change at the same time. The fact
that the two variables are correlated,
global temperature rise causes increases in carbon dioxide concentrations.
however, does not mean that one
However, your graphs do show a strong correlation between carbon dioxide causes the other. It is up to scientists to
and global temperature. What might be one cause of this correlation? Recall determine the nature of the relationship.
what you learned about the greenhouse effect in Chapter 8. You already know
about a connection between greenhouse gases and Earth’s temperature.
The Anthropogenic Greenhouse Effect

What do anthropogenic greenhouse gases have to do with the current
changes in Earth’s climate? You already know that Earth absorbs radiation
from the Sun, converts it to thermal energy, and then radiates lower-energy
infrared radiation. More and more of this lower-energy infrared radiation
is being absorbed by Earth’s atmosphere as concentrations of greenhouse
gases in the atmosphere increase. This human-caused increase is known as
the anthropogenic greenhouse effect. Carbon dioxide accounts for about anthropogenic greenhouse effect the
30 % of the anthropogenic greenhouse effect. Methane and nitrous oxide increase in the amount of lower-energy
infrared radiation trapped by the
contribute just under 20 % and 10 % respectively.
atmosphere as a result of higher levels
The anthropogenic greenhouse effect involves the same process as the of greenhouse gases in the atmosphere
natural greenhouse effect. What is happening is that humans are enhancing due to human activities, which is leading
the natural greenhouse effect. As humans release more greenhouse gases to an increase in Earth’s average global
into the atmosphere, Earth’s energy balance changes. More thermal energy temperature
is trapped inside the atmosphere, raising global temperatures beyond what
they would be from the natural greenhouse effect alone.
The Feedback Loop between Carbon
Dioxide and Global Temperature
Remember that even small changes in Earth’s climate can be made much
larger by feedback loops. We have already looked at the water vapour and
albedo feedback loops in Section 8.10. Another important feedback loop
involves carbon dioxide levels in the atmosphere and Earth’s temperature.
You already know that increases in carbon dioxide levels result in increases
in global temperature due to the greenhouse effect. However, increases in
temperature can also cause increases in carbon dioxide levels.
Over the past 400 000 years, rising temperatures increased the release of
carbon dioxide stored in plants and oceans (carbon sinks). As you know,
carbon dioxide is a greenhouse gas that traps thermal energy inside the
atmosphere. Thus, as rising temperatures caused carbon dioxide levels in
the atmosphere to increase, Earth’s average temperature rose even further
(Figure 6).
carbon dioxide traps more carbon dioxide

thermal energy in is released from
greenhouse effect carbon sinks
Figure 6 Carbon dioxide concentrations

global
and global temperatures are connected temperatures
in a positive feedback loop. increase
The ocean is a carbon sink, storing vast amounts of carbon. Much of the
carbon is dissolved carbon dioxide and carbonic acid. Scientists are concerned
that this stored carbon might be released as global temperatures increase. The
release of carbon would further increase levels of atmospheric carbon dioxide
and add to the anthropogenic greenhouse effect (Figure 7).
Figure 7 As global temperatures rise,

the ocean will likely absorb less and
less carbon from the atmosphere.
In addition, the ocean may release
increasing amounts of stored carbon.

Increases to Earth’s Average Temperature
Your carbon dioxide graph from the Try This activity showed that the
concentration of atmospheric carbon dioxide is now higher than it has been
for hundreds of thousands of years. The same is true for other greenhouse
gases, such as methane and nitrous oxide.
If humans continue producing greenhouse gases at a similar rate,
Earth’s average temperature will likely increase by 2 °C to 6 °C by the end
of the century. This increase may not sound extreme. However, it could
cause devastating impacts, such as more severe heat waves, flooding and
droughts, and species extinctions. You will learn more about future impacts
of climate change in Chapter 10.
in SUMMARY
• The concentrations of carbon dioxide and • As the concentrations of greenhouse gases
other greenhouse gases in the atmosphere are increase, more energy is trapped and absorbed
higher now than they have been for hundreds by the atmosphere. This process is called
of thousands of years. the anthropogenic greenhouse effect.
• The increase in greenhouse gases is caused by • The anthropogenic greenhouse effect is causing
human activities such as the burning of fossil Earth’s temperature to increase.
fuels, deforestation, agricultural practices, and • Carbon dioxide concentrations and global
industrial processes. temperatures are connected in a positive
• Some of the carbon dioxide produced by human feedback loop.
activities ends up in carbon sinks such as the • Positive feedback loops can increase the
oceans and forests. However, about half the anthropogenic greenhouse effect.
carbon dioxide and most other greenhouse gases
end up in the atmosphere.
CHECK YOUr Learning

1. What is the anthropogenic greenhouse effect? K/U 4. (a) What is a carbon sink?
2. You learned in this section that the greenhouse gas (b) How can Earth’s forests affect Earth’s temperature? K/U
concentrations have all increased over the past 5. The atmospheric concentration of carbon dioxide has
100 years. T/I varied over the past 400 000 years. For most of this time,
(a) Using the data in Table 1, calculate the percentage there was no industrial activity. Why, then, do we think
increase for each of the following: carbon dioxide, that the present increase in atmospheric carbon dioxide is
methane, nitrous oxide. due to human activities? State two reasons. A
(b) Are scientists most concerned about the gases that 6. Computer models of Earth’s climate project increases in
have increased by the greatest percentage? Why or the average temperature from 2 °C to 6 °C by the end of
why not? the century. Have these high temperatures ever occurred
3. How do trends in the atmospheric concentration of before in the past 400 000 years? K/U
carbon dioxide compare with trends in Earth’s 7. In Section 8.7, you designed and built a model of the
average temperature over the past 400 000 years? greenhouse effect. How might you redesign it to model the
Explain. K/U additional anthropogenic greenhouse effect? T/I

9.5 Canadian Emissions of Greenhouse Gases
In this chapter, you have learned that humans are producing increasing
amounts of greenhouse gases. Now it is time to bring the issue closer to
home. How do Canadians produce greenhouse gases, and how much do we
produce? Canada contains vast forests that act as carbon sinks (Figure 1).
Do our forests soak up the carbon dioxide we produce?
Canadian Sources of Greenhouse Gases

On average, individual Canadians emit more greenhouse gases than most
people in the world, ranking in the top ten worldwide. Alberta is Canada’s
largest provincial producer of greenhouse gases. Ontario is the second
largest. Ontario alone releases more than 200 million tonnes of greenhouse
gases per year (Figure 2). If we do not take into account tiny oil producing
countries such as Kuwait, Qatar, and Brunei, Canadians rank in the top two
or three emitters of greenhouse gases per person.
Figure 1 About 30 % of the world’s

boreal forest is in Canada.
Figure 2 Individual Canadians emit

more greenhouse gases than most
other people in the world. Heating our
homes in the winter contributes to our
emissions.
Why do Canadians produce so much greenhouse gas? Table 1 lists some

of Canada’s main sources of greenhouse gases. Most industrialized countries
produce greenhouse gases from similar sources.
DID YOU KNOW?
A Natural Resource Table 1 Some Canadian Sources of Greenhouse Gases
There are more fossil fuel deposits Quantity per year based on data
in Canada than in any other country Source Examples from 2006 (Mt (megatonnes) CO2-eq)
except Saudi Arabia. Companies in
Alberta are world leaders in developing producing and using generating electricity and heat, 324
energy fossil fuel industries, mining,
technologies to process oil sands from
lighting and heating buildings,
open-pit mines. manufacturing
transportation exhaust from cars, trucks, 190
airplanes, trains
fugitive emissions gases released during fossil 67
fuel extraction and processing
agriculture production of nitrogen fertilizers, 62
farm machinery exhausts
industrial processes mineral and metal production, 54
chemical industry
waste management sewage treatment, landfills 21
land use and forestry forests, crops, grassland, 20

wetlands, settlements
Data from Sectoral Greenhouse Gas Emission Summary, Environment Canada

In Table 1, the unit for the numbers in the third column is “Mt CO2-eq.”
This is read as “megatonnes of carbon dioxide equivalent.” This unit is used
because different greenhouse gases have different abilities to trap thermal
energy. Scientists consider the relative ability of each gas to absorb lower-
energy infrared radiation and convert it to thermal energy. They compare
this ability to the effect of carbon dioxide gas: “CO2 equivalents” (CO2-eq).
Therefore, 1 Mt of a gas that is 10 times more efficient at trapping thermal
energy than carbon dioxide is the same as 10 Mt CO2-eq.
Many Canadian sources of greenhouse gases come from burning fossil
fuels (Figure 3).
(a) (c)
(b) (d)
Figure 3 Sources of greenhouse gases include (a) gasoline burned in car and truck engines,
(b) coal-based power plants, (c) manufacturing and other industrial processes, and (d) natural
gas heating systems in homes.
The main component of natural gas is methane (Figure 4). Methane is a

DID YOU KNOW?
greenhouse gas, so any emissions of methane also increase concentrations of
Generating Trouble
greenhouse gases. Passenger vehicles in Ontario emit,
all together, about 30 Mt CO2-eq of
greenhouse gases per year. Driving
an SUV releases 1.5 t more carbon
dioxide per year, on average, than
driving a car. Coal-generating stations
produce about 20 Mt CO2-eq of
greenhouse gases each per year—
equivalent to the emissions of six
million cars.
Figure 4 Methane and other waste

gases are often “flared off” from oil
rigs to prevent a dangerous buildup of
pressure.
NEL 9.5 Canadian Emissions of Greenhouse Gases 391
Greenhouse Gases
from Canadian Forests
Canadian Forests: Sources or Sinks?
Canada has about 400 million hectares of forest. Our forests are among our
160 most valuable natural resources. When healthy, Canadian forests are a carbon
sink. Our forests, however, are sometimes a source of carbon due to the
Emissions/removals (Mt CO2-eq)
120
source combination of insect damage, wildfires, and deforestation (Figure 5). Insect
80
infestations kill trees, speeding up decomposition and increasing carbon
40 dioxide emissions. Forest fires release large quantities of carbon dioxide and
0 other greenhouse gases into the atmosphere. When forests are cut down,
–40 greenhouse gases, including methane and carbon dioxide, are released.
sink
–80
An International Issue
–120
Greenhouse gases produced in Canada enter the atmosphere and travel
–160 around the world. Likewise, greenhouse gases produced elsewhere affect our
climate. This is truly an international issue.
1990 1995 2000 2005
Year Reducing our use of fossil fuels is the most important thing we can do to
Figure 5 Are Canada’sCOforests
2eq more
help limit future changes in climate. Canadian governments and industries
often a source or a sink for greenhouse are already making some changes to reduce our dependence on fossil fuels.
gases? You will examine these changes in Section 10.4.
in SUMMARY
• On average, individual Canadians emit more • The greatest causes of greenhouse gases in Canada
greenhouse gases than most other people in include burning fossil fuels for transportation and
the world. to produce electricity, and processing fossil fuels.
• Ontario is the second largest provincial • Canadian forests may be a source or a sink
emitter. of carbon.
CHECK YOUr Learning

1. Canadians produce more greenhouse gases per capita than 4. List three factors that affect Canada’s forests and determine
most other countries in the world. K/U C A whether they are a carbon sink or a source of carbon
(a) List six Canadian sources of greenhouse gases in order dioxide. K/U
of their contribution, beginning with the source that 5. The ocean and living things (including forests) are Earth’s two
produces the most. main carbon sinks. Draw a flow chart (similar to Figure 6)
(b) Think carefully about the list in part (a). Which of these or other diagram that shows the relationship between these
sources should be a priority for Canadians, in terms of carbon sinks, greenhouse gases, and Earth’s temperature. C
reducing greenhouse gas production? Explain.
2. (a) What other greenhouse gases does Canada produce in a
significant amount in addition to carbon dioxide?
(b) How are these greenhouse gases produced? K/U
3. (a) The pine beetle is currently destroying large areas of

forest in British Columbia. Some scientists fear that it will
travel across Canada and damage forests in Ontario and
other provinces. How will this affect Canada’s output of
greenhouse gases into the atmosphere?
(b) If forests destroyed by the pine beetle are then
Figure 6
burned, how will this affect Canada’s greenhouse gas
contribution? T/I A

Computer Modelling: Evidence that Human 9.6
Activity Is Causing Current Changes
When we look at Earth’s history, we see that the climate has always been
changing. Even over the past thousand years, the climate has changed
because of natural causes such as volcanic eruptions and changes in oceanic
currents (Figure 1). More recently, however, Earth’s climate has changed
because of human activities. Today, scientists are more than 90 % certain
that most of the change observed over the last century is due to human
emissions of greenhouse gases. A greater than 90 % certainty means that
something is very likely to be true.
(a) (b)
Figure 1 The eruptions of (a) Mount St. Helens in 1980 and (b) El Chichón in 1982
caused a temporary cooling as millions of tonnes of particles were shot into the atmosphere.
The photograph of El Chichón was taken two years after the volcano erupted.
When scientists study the effect of a variable, they try to hold all other
variables constant. Scientists would prefer to conduct controlled experiments
with a second identical Earth. They could then compare our Earth with a
second Earth with no people. This way, they could measure exactly how
humans are affecting Earth’s climate system. As this is not possible, scientists
use past observations and complex computer models of the climate system
to determine what is causing the changes we see today.
Modelling the Climate

Scientists have developed detailed computer models that represent
important components of the climate system. These models are used to Climate scientists often
create simulations of Earth’s climate under different circumstances. Scientists work closely with computer
programmers. To find out
can identify which factors are affecting the climate by comparing these more about being a computer
simulations with real-life observations. Thus, the models can “predict” what programmer,
the climate would be like under certain circumstances. GO TO NELSON SCIENCE
Two scenarios are described on the next page. In the first, the model
includes only natural factors acting on the climate system. In the second
scenario, scientists include both natural and anthropogenic influences.
NEL 9.6 Computer Modelling: Evidence that Human Activity Is Causing Current Changes 393
Scenario 1: Natural Changes Only
This scenario shows what Earth’s climate would be like if no humans existed.
This scenario considers the following:
• changes in energy from the Sun
• volcanic eruptions
• natural processes and variability that are part of Earth’s climate system,
including natural emissions of greenhouse gases (Figure 2)
The scenario does not include any human-related emissions of greenhouse
Figure 2 Swamps are a natural
source of methane and carbon dioxide gases.
gases. Climate scientists take natural In this scenario, Earth’s average global temperature stays about the same,
emissions like these into account when even decreasing a little from the 1950s to today. The thick blue line in
modelling factors affecting climate.
Figure 3 shows the range of expected global temperature due to natural
changes only, as predicted by this scenario.
Global Average Temperatures

Scenario 1: Expected
temperature range if only
1.0 natural changes are occurring
0.5 Scenario 2: Expected

temperature range if human
activity is influencing climate
0.0
Actual temperatures observed
1900 1950 2000

Year
Figure 3 This graph compares predicted values for two scenarios with actual global temperature
(green line) changes over the past century. The y-axis gives the “temperature anomaly,” or changes
above and below the average temperature (0.0).
Scenario 2: Natural and Anthropogenic Factors

This scenario models an Earth that includes both natural changes and changes
caused by human activity (Figure 4). This scenario considers the natural changes
listed above and anthropogenic greenhouse gas emissions.
In this scenario, Earth’s average global temperature increases, particularly
over the last 50 years. The thick pink line in Figure 3 shows the range of
expected global temperatures if human activity is affecting climate, as
predicted by this scenario.
Figure 4 Car exhaust is one of many
human sources of greenhouse gases. Comparing Scenarios: Which Model Fits?
The two scenarios present two different pictures: a picture of Earth’s climate
with only natural changes and a picture of Earth’s climate with both natural
changes and human influences. Which matches the real world best? The
green line in Figure 3 represents actual data on Earth’s global temperature.
As you can see, over the past 50 years, the green line matches the pink line,
not the blue line. In other words, the real world matches the scenario in
which human activity is affecting Earth’s climate.
To view a simulation of how From these computer simulations, scientists have concluded that human
climate will change over time, activity is affecting the climate in a noticeable way, particularly over the last
GO TO NELSON SCIENCE 50 years.

Conclusion: Human Factors Have Affected reaDing Tip
the Climate Over the Past 50 Years Summarizing

When you are summarizing a text, use
Are the changes that we are currently experiencing within the range of natural the same organizational pattern that the
changes in the past? To answer this question, scientists look at proxy records text uses. If the text uses a problem-
such as ice cores to see what variations in climate happened in the past. Is it solution pattern to give the problem and
possible that today’s changes are just part of these natural cycles? then several possible solutions, do the
same. If the text describes a process,
Greenhouse gas levels in the atmosphere are higher today than they
summarize the steps in the same order
have been at any time in the past 800 000 years. However, Earth’s average as the original text.
temperature is not yet warmer than it has been in past cycles. If human
emissions of greenhouse gases continue to increase at the same rate, by the
year 2100, Earth could be warmer than at any time in the past 800 000 years.
Look back at Figure 3 in Section 8.9. This graph shows Earth’s average
temperatures over the last 400 000 years. There have been times when Earth’s
temperature was just as warm or 1 °C or 2 °C warmer than it is currently.
Why, then, are scientists worried about the fact that Earth’s temperature will
probably increase in the next century? They are worried for three reasons.
First, this temperature change will happen much more quickly than in the
past. Second, the temperature change will be higher than anything seen over
the last 800 000 years. Third, human civilization is adapted to recent climate
conditions. Any major change in these conditions will have drastic effects. In
Chapter 10, we will consider how scientists make projections about Earth’s
future climate and what actions we should take.
in SUMMARY
• Complex computer models of the climate system • At the current rate of human emissions of
are used to understand factors that have affected greenhouse gases, Earth could be warmer by
climate in the past. the year 2100 than at any time in the previous
• Using models, scientists have concluded that 800 000 years.
human activity is affecting the climate in a
noticeable way, particularly over the last 50 years.
CHECK YOUr Learning

1. A computer model compares two worlds: one with 2. In your own words, interpret the graph in Figure 3 in this
humans and one without humans. All variables are section. T/I C
the same in both worlds, except for the effects of 3. Earth’s average temperature is not yet as warm as it has
human activities. In the computer world with humans, been in past cycles of natural climate change (Figure 3 in
temperatures are rising. In the computer world without Section 8.9). T/I A
humans, temperatures are staying the same. K/U T/I
(a) Does this mean that today’s climate change might be
(a) What variable does the computer model study? natural? Explain your answer.
(b) Why are all other variables kept the same? (b) Why are scientists concerned about the change in
(c) Suppose temperatures in the real world had stayed climate that we are currently experiencing?
the same over the past 50 years. What would this 4. (a) How well do you understand the idea of using
show about the computer model and its predictions percentages to describe scientists’ certainty?
regarding the effect of humans on the world’s climate?
(b) What could you do to improve your understanding? T/I
(d) Temperatures around the world have, in fact, been rising

over the past 50 years. What does the computer model
show about the effect of humans on the world’s climate?
NEL 9.6 Computer Modelling: Evidence that Human Activity Is Causing Current Changes 395
CHAPTER
LOOKING BACK
9
We have evidence that our Human activities have The increase in greenhouse
climate is changing. increased atmospheric levels gases is causing the
of greenhouse gases. anthropogenic (human-
• The average temperature of Earth
caused) greenhouse effect.
is rising. (9.1) • Human activities produce carbon
• Glaciers, ice sheets, and sea ice dioxide, methane, nitrous oxide, • As the concentration of greenhouse
are melting. (9.1, 9.2) and CFCs. (9.4) gases in the atmosphere increases,
• The sea level is rising and • Most of our greenhouse gas more energy is trapped. (9.4)
ecosystems are changing. (9.1) emissions end up in the • The trapped energy leads to
atmosphere. (9.4) an increase in Earth’s global
• Carbon dioxide concentrations temperature. (9.4)
in the atmosphere have risen to
the highest level in at least
800 000 years. (9.6)
• Positive feedback loops increase
the effect of anthropogenic
greenhouse gases. (9.4)
Global Average Temperatures

Average Global Temperature during the 20th Century
0.6
Scenario 1: Expected
0.4 temperature range if only

1.0 natural changes are occurrin
0.2
0.5 Scenario 2: Expected
0.0 temperature range if human
activity is influencing climat
–0.2 0.0
Actual temperatures observ
–0.4
1880 1910 1940 1970 2000 1900 1950 2000

Year Year
Annual mean
The anthropogenic The largest sources of Scientists use climate
greenhouse effect is the greenhouse gases in Canada models to figure out how
main cause of today’s are the production and different factors affect our
climate change. burning of fossil fuels. climate.
• There is a strong relationship • On average, individual Canadians • Climate models show that human
between atmospheric carbon are in the top ten highest emitters activities are affecting the
dioxide levels and global of greenhouse gases. (9.5) climate, particularly over the
temperature. (9.4, 9.6) • Fossil fuels are used for last 50 years. (9.6)
• Scientists have studied both transportation, heating, and the
natural and anthropogenic causes production of electrical energy. (9.5)
of climate change. They have • The production and use of energy
concluded that human activities produce about 324 Mt CO2-eq in
are very likely to be the cause of Canada each year. (9.5)
observed climate change. (9.4, 9.6) • Canada’s forests are carbon sinks
and carbon sources. (9.5)

THINK NOW? thermal expansion (p. 376)
anthropogenic (p. 384)
You thought about the following statements at the beginning of anthropogenic greenhouse
the chapter. You may have encountered these ideas in school, effect (p. 387)
at home, or in the world around you. Consider them again and
decide whether you agree or disagree with each one.
1 Today’s changes in climate are

similar to changes that occurred in
4 Climate change will have both
negative and positive effects.
the past. Agree/disagree?
Agree/disagree?
2 Increased atmospheric carbon dioxide

is mainly due to human agriculture
5 Changes to Earth’s climate can
be reversed by changing human BiG ideas
practices around the world. activities. ✓ Earth’s climate is dynamic
Agree/disagree? Agree/disagree? and is the result of
processes.
and human factors.
✓ Climate change affects
3 Scientists can predict exactly how the
climate will change in the future.
6 The burning of fossil fuels in heating,
transportation, and industry is the ways.
Agree/disagree? greatest cause of greenhouse gas People have the
production in Canada. responsibility to assess
Agree/disagree? their impact on climate
How have your answers changed since then? effective courses of
What new understanding do you have? action to reduce this
impact.

CHAPTER
REVIEW
9
What Do You Remember? 11. Describe the feedback loops illustrating the
1. Describe five different signs that indicate connection between each variable below and
that climate change is already affecting the climate change: (9.4, 9.5) K/U
environment we live in. (9.1) K/U (a) Raising the temperature of the ocean results
2. List three Canadian sources of greenhouse in more melting of the ice.
gases. (9.5) K/U
(b) Higher temperatures result in increased
evaporation of moisture from the soil,
3. What is the connection between fossil fuels and making it more likely that forest fires
greenhouse gases? (9.4) K/U
will occur, adding carbon dioxide to the
4. List three different purposes for burning fossil atmosphere.
fuels in Canada. (9.5) K/U (c) Increasing atmospheric carbon dioxide
raises the temperature of the ocean, reducing
5. The term “anthropogenic greenhouse gases”
the amount of carbon dioxide that can be
includes carbon dioxide and other gases. Name
absorbed by the ocean.
three of these other gases. (9.4) K/U
12. (a) When two variables, such as average world

6. (a) In your own words, define “carbon sink.”
temperature and sea level, change at the
(b) Give an example of a carbon sink.
same time, does this mean that one causes
(c) Explain why carbon sinks are
the other? Explain.
important. (9.4, 9.5) K/U C
(b) Think about several reasons or a piece of

7. List three factors that affect whether Canadian evidence that strongly suggests that these
forests act as a source or a sink for greenhouse two things are related. Write an argument of
gases. (9.5) K/U
several sentences that you can use to convince
friends and family members. (9.4) K/U T/ I C

8. Scientists believe that today’s climate change is 13. In Chapter 5 you learned that nitrous oxide is a
very likely caused by human activity. Summarize harmless gas administered to dental patients. In
the evidence that leads scientists to this this chapter you learned about a different aspect
conclusion. (9.6) K/U of nitrous oxide. Comment on the description of
nitrous oxide as a “harmless” gas. (9.4) T/ I
9. Draw a diagram that summarizes the relationship

between using fossil fuels for transportation and Solve a Problem
Earth’s global temperature. (9.4) K/U C
14. A scientist wants to examine the relationship
between sea level rise and carbon dioxide
10. The greenhouse effect is natural and important
concentrations in the atmosphere. Describe one
to life on Earth. Scientists today are concerned
method the scientist could use. (9.1, 9.3) K/U C
about something called the “anthropogenic

greenhouse effect.” (9.4) K/U 15. (a) Brainstorm with some friends to create a list
(a) Distinguish between the anthropogenic of extreme natural events related to climate.
greenhouse effect and the natural Ask your parents and other people for
greenhouse effect. additional examples.
(b) Explain why scientists consider the (b) Which, if any, of the events on your list had
anthropogenic greenhouse effect to be positive impacts?
a problem. (c) Outline what kind of research you could do
to find out if extreme events have increased
in frequency and/or intensity over the past
50 years where you live. (9.1) T/I A

Create and Evaluate Reflect on Your Learning
16. Examine Figure 1. You saw this previously 17. In Chapter 9, you learned that increases in
in Section 9.1 (Figure 2). Consider the two carbon dioxide concentrations in the atmosphere
following reports: cause increases in global temperatures.
Average Global
Temperature
Average Global Temperature (a) Did you find this concept difficult to
0.6
0.6
understand? Why or why not?
0.6
(b) How did your learning in Chapter 8 prepare
(°C)
(°C)
anomaly(°C)
0.4
0.4
0.4 you for this concept?
anomaly
Temperatureanomaly
(c) Did you find that the evidence used to

0.2
0.2
0.2 support this concept was reasonable and
convincing? Explain.
Temperature
Temperature
0.0
0.0
0.0
(d) What further research can you do to help
–0.2
–0.2 yourself understand this concept?
–0.2
–0.4
–0.4
–0.4
1880 1910 1940 1970 2000
Web Connect
1880
1880 1910
1910 1940
1940 1970
1970 2000
2000
Year
Year 18. The National Snow Information System for
Year
Annual
Annual mean
Figure 1 Annual mean
mean Water website provides projections of what
• In a 2007 report, an independent researcher drew might happen to the extent of snow over
a line between the temperature data points for Canada in the future. (9.2) K/U T/I
1998 and for 2006 (orange line). Looking at the (a) Is snow cover increasing or decreasing in
horizontal line, the researcher concluded that Canada?
Earth stopped warming after 1998. He concluded (b) How does snow help keep Earth cool?
that we do not have anything to worry about. (c) What effect might a reduction in snow cover
• Another 2007 report drew a trend line through the have on Earth’s climate?
annual temperature data points from 1996 to 2006 (d) How is this an example of a feedback loop in
(yellow line). The writers of this report concluded climate change?
that since the line of best fit had a positive slope,
19. Some people refuse to believe that climate
Earth’s temperature increased continuously over the
change is happening, or that its effects will be
past century. Since human use of fossil fuel increased
mainly negative. T/I C A
continuously over the past century, we do not have

to consider any other factors. (9.1) TI C A
(a) Research three common arguments skeptics
present that disagree with the IPCC’s
(a) For each report, write a sentence or two
findings. Summarize your findings.
describing a possible bias behind the report.
How might the bias be related to the editor’s (b) Come up with your own replies to these
knowledge? Belief? Values? three arguments, based on the information
in this book.
(b) Find an approximate trend line for other time
(c) Research responses to these three common
periods besides the ones above. Place a straight
arguments that have been written by climate
edge over the data points for a 10-year period
change experts. Summarize your findings.
(1996–2006), a 20-year period (1986–2006), a
(d) Compare the experts’ responses with your
30-year period (1976–2006), and another 30-year
own. What new information did you learn
period (1940–1970). What do you conclude about
from the experts’ responses?
each time period?
(c) How would you interpret the reports summarized
above?
(d) If you were asked to draw your own line of best To do an online self-quiz or for all
fit, would it be more similar to the orange line or other Nelson Web Connections,
the yellow line?
CHAPTER
SELF-QUIZ
9
For each question, select the best answer from the four Indicate whether each of the statements is TRUE or FALSE.
alternatives. If you think the statement is false, rewrite it to make it true.
1. Which statement best describes thermal 5. Refrigeration agents are a significant source
expansion? (9.1) K/U
of anthropogenic carbon dioxide in the
(a) The volume of water increases as its atmosphere. (9.4) K/U
temperature decreases. 6. Earth’s average temperature has been

(b) The mass of water increases as its continuously increasing since 1880. (9.1) K/U
temperature increases.
(c) The volume of matter increases as its 7. Carbon dioxide stored in the oceans might be
temperature increases. released as global temperatures increase. (9.4) K/U
(d) The volume of a substance increases as its

8. Melting glaciers and continental ice sheets cause
concentration increases.
sea levels to rise. (9.1) K/U
2. What is the most abundant human-produced

greenhouse gas? (9.4) K/U
(a) water vapour in the blanks with a word or phrase that correctly completes
the sentence.
(b) ammonia
(c) carbon dioxide 9. Reservoirs such as oceans and forests that absorb
(d) methane carbon dioxide from the air are known as carbon
3. Which of the following may be attributed to _________. (9.4) K/U
an increase in greenhouse gases in Earth’s 10. Greenhouse gases are emitted during the
burning of _________ for transportation,
(a) rising sea level heating, and industrial use. (9.4) K/U
(b) falling temperatures

11. The concentration of carbon dioxide in the
(c) formation of new ice sheets
atmosphere is higher now than it has been for
(d) expansion of Arctic ice
_________ years. (9.4) K/U
4. Which of the following series orders Canadian

greenhouse gases from highest to lowest Match each substance on the left with the most appropriate
emissions? (9.5) K/U
source on the right.
(a) transportation; agriculture; land use and 12. (a) carbon dioxide (i) rice farming and
forestry cattle ranching
(b) agriculture; transportation; land use and (b) methane (ii) deforestation and
forestry burning fossil fuels
(c) agriculture; land use and forestry; (c) nitrous oxide (iii) refrigeration agents
transportation (d) chlorofluorocarbons (iv) nitrogen fertilizers
(d) land use and forestry; agriculture; and livestock feed
transportation (9.4) K/U

13. Describe the two main factors that contribute to
rising sea levels on Earth. (9.1) K/U
14. How does deforestation affect the amount of

carbon dioxide in the atmosphere? (9.4) K/U

15. The word “anthropogenic” means “human 22. Scientists believe that anthropogenic sources
caused.” Write a phrase using the word of greenhouse gases are causing the climate to
“anthropogenic” that describes the relationship change. (9.1) K/U C
between humans, greenhouse gases, and global (a) What evidence of anthropogenic climate
climate change. (9.4) C
change do you think is most convincing?
16. Explain how a tree on your lawn could be a (b) Write an argument that you can use to
communicate this to friends and family
(a) carbon sink.
members.
(b) carbon source. (9.4) A
23. Why is climate change considered a truly global

17. How could the melting of glaciers have a
issue? (9.5)K/U
(a) positive effect on human populations?

(b) negative effect on human populations? (9.1) T/I 24. (a) Describe the two main causes of sea level rise.
18. Feedback loops can make small changes in (b) What additional causes might contribute to
Earth’s climate much larger. (9.4) K/U
the sea level rise? (9.1, 9.3) K/U
(a) Is the feedback loop between carbon dioxide 25. If all countries in the world stopped their
concentration and global temperature emissions of greenhouse gases tomorrow, could
positive or negative? we stop climate change from happening? Explain
(b) Describe the feedback loop using a diagram. your answer. (9.4) K/U C
19. The Kyoto Protocol is an international agreement 26. Scientists use computer models to understand
that aims to reduce greenhouse gas emissions. It factors that have affected the climate in the
places restrictions on human activities that produce past. Explain how they use these models to
greenhouse gases. Why might a country be understand the effect humans have had on
reluctant to participate in this agreement? (9.1) T/I
Earth’s climate system. (9.6) K/U C
20. The choices we make about our personal 27. Imagine that you are taking part in a debate
transportation will influence how much about Canadian emissions of greenhouse gases.
greenhouse gases are produced. (9.4, 9.5) A T/I
Your opponent says, “Canada’s forests absorb
(a) An SUV releases roughly 1.5 t more carbon carbon dioxide, so we don’t have to worry about
dioxide per year than a car does. How might our emissions. The more greenhouse gases we
this information affect your decisions about emit, the more our forests will absorb.” Write
transportation? a short paragraph critiquing your opponent’s
(b) Most buses release even more carbon dioxide argument. (9.5) C A
than SUVs do. Do you think people should

28. Use a table or graphic organizer to compare the
stop riding buses?
natural greenhouse effect with the anthropogenic
(c) Respond to this statement: “Some countries
greenhouse effect. (9.4) K/U C
have forests that soak up significant amounts

of carbon dioxide. People in these countries
shouldn’t have to worry about what they
dr ive.”
21. When two variables change at the same time,
they are considered to be correlated. (9.4) T/I
(a) When two variables are correlated, does this

mean that one causes the other?
(b) How have scientists concluded that human
activity is affecting climate in a noticeable
way?

CHAPTER
10 Assessing and Responding

to Climate Change
KEY QUESTION: What can we do to reduce the

impacts of climate change and to prepare for coming
changes?
Constructing wind farms is one possible response to climate change.
402 Chapter 10 • Assessing and Responding to Climate Change NEL

UNIT D
Climate Change

KEY CONCEPTS
The impacts of climate Impacts of climate change Climate change in Ontario

change will affect our will be felt the most in the is expected to bring
environment and society. Arctic. warmer winters and hotter
summers.
Current initiatives will not Greenhouse gas emissions Switching to clean energy
prevent serious negative must be reduced by 80 % sources is essential to
effects from climate by 2050 to avoid the most reduce greenhouse gas
change. serious impacts. emissions.

ENGAGE IN
SCIENCE
In 2010, the Vancouver Convention & Exhibition

Centre (VCEC) will be the international broadcast
centre for the Vancouver Olympics. The centre will
become one of the buildings that people around
the world associate with Canada. Fortunately
for Canadians, the newly expanded VCEC will
be a worthy representative of our country. The
centre is environmentally friendly, with many
green technologies that help reduce emissions of
greenhouse gases.
Green Roof Technology

The centre boasts an enormous green roof, made
up of 400 000 plants that are native to the West
Coast. Although the plants start off small, they Other Green Technologies
are quickly growing into a lush living carpet. On a Built partly on water, the new VCEC is designed to
green roof, plants absorb the Sun’s energy and use provide an underwater habitat for algae, mussels, and
it for photosynthesis, instead of emitting thermal other marine life. The building is energy efficient,
energy back into the atmosphere as an ordinary roof resulting in fewer greenhouse gas emissions than a
does. Green roofs also provide better insulation for traditional building of the same size. It also contains
buildings. As a result, buildings with green roofs use an on-site water treatment plant and is built to last
less energy for heating and cooling. Buildings with a long time. The VCEC provides a good example
green roofs stay cooler in hot weather. of how green technologies help prepare us for a
Green roofs absorb stormwater, reducing the changing climate.
amount of water going into storm sewers. They How could green technologies be used in your
also improve air quality and reduce noise pollution. home or neighbourhood? Will these technologies be
Other major cities, including London, Chicago, and enough to reduce the impacts of climate change? Can
Toronto, are looking into green roofs as one way to you suggest a further course of action related to the
prepare for changes in climate. green technologies described above?

WHAT DO YOU
THINK?
1 We can stop climate change from happening if we reduce

our consumption of fossil fuels.
4 The best way to decrease the impact of human activity on
climate is to switch to clean energy sources.
2 Scientists are always objective and unbiased in their data

collection, analyses, and conclusions.
5 Canadians’ use of fossil fuels is wasteful.
Agree/disagree?
Agree/disagree?
3 Since the impact of climate change will be most felt in

the Arctic, people in countries near the Equator do not
6 We need to take action on climate change at individual,
local, regional, and international levels.
need to be concerned. Agree/disagree?
Agree/disagree?

FOCUS ON
READING
Synthesizing
When you synthesize, you combine different sources of information in a
way that brings you to a new understanding. Use the following strategies
when synthesizing a text:
• make connections between new information in the text and what you
already know
• explain relationships among ideas in the text and the ideas in other texts
READING TIP • monitor how the new ideas and information change your perspectives
• consider how features such as graphs and illustrations combine
with the text
• draw conclusions about what you have learned
Electricity Use
As summers get hotter, we will need to use more electricity for air
conditioning. Generating electricity from coal or natural gas produces
greenhouse gases, which makes the problem of climate change worse. In
the winter, energy use may decrease due to warmer weather.
In Ontario, about a quarter of our electricity is produced using
hydroelectric power, which does not produce greenhouse gases.
Figure 1 Blackouts could occur more During heat waves, however, people might try to use more electricity
often as Canadians use more electricity to than can be produced, leading to blackouts (Figure 1). In addition,
cool their homes and offices. less hydroelectricity will be available if the lake levels drop because of
climate change. This could increase our use of fossil fuels.
Synthesizing in Action
Synthesizing is a powerful way to use what you already know as a
context for thinking about new information and drawing your own
conclusions. Here is an example of how one student used the strategies
to synthesize the selection about electricity use.
Information in the Text What I Already Know What I Think Now
More air conditioning will be The power outage of 2003 We will need to generate
needed if summers get hotter. happened in the summer. more electricity.
Hydroelectric power is better Greenhouse gases cause We need to generate more

than coal or gas. climate change. electricity that is clean.
Lower lake levels will mean less Wind and solar energy We need to use more wind
hydroelectric energy. are clean. and solar technology.

Climate Models and Clean Energy 10.1
Science fiction movies and books contain many interesting ideas about
the future. Depending on the climate, Earth in 100 years could be very
different from Earth today (Figure 1). At the same time, the way in
which human technologies and society develop will affect Earth’s climate.
Figure 1 The climate will affect our future way of life—and our present way of life will affect future
climate. How do you think human technologies and society will develop?
Uncertainties in Predicting Future Climate

Think back on what you have learned about Earth’s complex climate system.
Among other things, the climate system depends on the following:
• the carbon and water cycles
• concentrations of greenhouse gases (GHGs) in the atmosphere
• positive and negative feedback loops, including the albedo effect
• ocean currents, including thermohaline circulation
With this many variables, scientists who study the climate system cannot
be sure how quickly Earth’s climate will respond to changes in greenhouse gas
concentrations. For example, Arctic sea ice is melting faster than the climate
models predicted. This suggests that Earth’s climate system might be more
sensitive to our greenhouse gas emissions than previously thought.
Also, scientists have discovered that the rate at which the ocean and living
things absorb carbon is slower than previously thought (Figure 2). This means Figure 2 Oceans are absorbing
that the concentration of atmospheric carbon dioxide may increase faster than carbon at a slower rate than scientists
previously thought.
we expect, even if our emissions remain constant.
In spite of its complexity, computer models are still able to model the
climate system with reasonable accuracy. In fact, the main reason why
predicting climate is difficult is that scientists do not know what choices people
will make. How much the climate changes over the next 100 years depends
on the choices we make now. For example, if we continue to use fossil fuels at
the same rate, we can expect the climate to change drastically. Conversely, if
we quickly switch to clean energy sources that produce few or no greenhouse clean energy source a source of energy
gases, Earth’s climate may change less dramatically. We have a good chance of that produces no significant greenhouse
gases
preventing the most severe impacts of climate change if we act soon.
NEL 10.1 Climate Models and Clean Energy 407

Climate Projections
climate projection a scientific forecast of A climate projection is a reasonable scientific estimate of future climate
future climate based on observations and conditions. Climate projections are based on simulations by complex
computer models
computer models. These models, called climate models, consider future
changes that will affect greenhouse gas production (Figure 3).
Figure 3 This image, showing changes

in sea ice cover and sea surface
temperature, was generated using
output from climate models.
We do not know what our future GHG emissions will be or how quickly
Earth will respond. However, scientists can develop projections that forecast
what Earth’s future climate will probably be like under specific conditions.
To generate climate projections, scientists make assumptions about future
human behaviour. This kind of assumption is called a scenario. One scenario (A)
is that humans continue to use fossil fuels at the same rate as today (Figure 4).
A different scenario (B) is that humans switch from fossil fuels to clean energy
sources within 20 years. For each scenario, scientists use climate models to make
projections of how the climate would change under those circumstances.
Scenario A:
Scenario A: Annual emissions Earth’s temperature
Humans use some Annual
Humans usesources,
some would be emissions
about 28 Gt Earth’s
would temperature
increase by
clean energy would be about 28 Gt would
clean energytosources, of carbon by the about 4increase by
°C by the
but continue depend of carbon by the about 4 °C by the
but continue to depend end of the century. year 2100.
Figure 4 To make climate projections, mainly on fossil fuels. end of the century. year 2100.
mainly on fossil fuels.
scientists first develop possible
scenarios. Next, they determine the
amount of greenhouse gases that would
be produced under each scenario. Scenario B: Annual emissions Earth’s temperature
Finally, they input these values into Scenario
Humans quicklyB:
switch Annual
would beemissions
about 7 Gt Earth’s
would temperature
increase by
climate models to calculate how Earth’s toHumans quicklysources,
clean energy switch would be about
of carbon 7 Gt
by the would
about 2increase by
°C by the
to clean
and energy sources,
also conserve energy. of carbon
end by the
of the century. about
year2 °C by the
2100.
climate would change under those
and also conserve energy. end of the century. year 2100.
conditions.

To develop future climate scenarios, scientists think about the following:
• How fast will the world’s population increase?
• What kinds of technologies will we be using in 10 years? 50 years?
100 years?
• What energy sources will we use in 10 years? 50 years? 100 years?
Scientists who study the climate have developed projections for many
scenarios. The projections have something in common. Scenarios with
higher greenhouse gas emissions result in larger temperature increases
than scenarios with lower emissions. Under a higher-emissions scenario,
such as Scenario A, the temperature changes by the end of the century
are double those expected under a lower-emissions scenario, such as
Scenario B (Figure 5).
Observed and Projected Warming READING TIP

5.0
Visual Information
If you are struggling to understand the
4.0 main idea in a text, you can use the
information in an illustration or photo to
Global surface warming (°C)
help you. Alternatively, the information

3.0
in a graph or table could give specific
details to help you synthesize.
2.0
1.0
0.0
Figure 5 The two coloured lines show the
possible consequences of two scenarios.
In Scenario A (red), humans continue
1900 1950 2000 2050 2100 to depend on fossil fuels. In Scenario B
Year (blue), humans switch to clean energy
Scenario A Scenario B sources and conserve energy.
T RY THIS ESTIMATE ONTARIO’S FUTURE CLIMATE

SKILLS HANDBOOK
SKILLS: Predicting, Controlling Variables, Performing, Evaluating 3.B.
In this activity, you will run a computer simulation and discover 4. Read the map produced by the program. Record your
how your chosen scenario might affect Ontario’s climate. observations.
Equipment and Materials: computer with Internet access 5. Repeat the projection for a different set of values.
A. Compare your results from the two sets of values.
Ask yourself questions such as the following: T/I
1. Your teacher will give you instructions on accessing the • What is the greatest change that will happen in Ontario?
computer simulation. Choose “future climate.” Decide which What is the least amount of change?
climate value and time period you want to look at. For • Which cities or towns will see the greatest change?
example, you could choose summer temperature average Which will see the least amount of change?
for the years 2071 to 2100 in Ontario. Click on your choices. B. Explain how a climate model like this one can help
2. Choose either: the higher greenhouse gas scenario or the scientists estimate changes in climate. T/I
lower greenhouse gas scenario. C. Identify any drawbacks of using a climate model such as
3. Choose a map type (i.e., province) and a location. this one. For example, what is not shown? What incorrect
assumptions (if any) could be made from a climate model
like this one? T/I

Changing Our Energy Sources
Energy use is one of the main variables needed to generate climate
projections. We depend on fossil fuels to power the many technological
devices we are accustomed to using. Extracting, refining, and using fossil
fuels release greenhouse gases.
To limit the extent of climate change, we will have to change from using
fossil fuels to using clean energy sources. The most common sources of
clean energy are summarized in Table 1.
Table 1 Clean Energy Sources

Clean energy source Description
wind power
Wind causes the blades of wind turbines
to turn, powering generators that produce
electricity.
geothermal energy
Thermal energy below Earth’s surface is
used to heat homes and other buildings.
solar power
Solar panels absorb radiation from the Sun
and convert it into electricity. The Sun’s
radiation can also be used to heat water.
hydroelectricity
The energy of moving water (e.g.,
a waterfall) turns turbines to power
generators that produce electricity.
DID YOU KNOW?

biofuels
Biofuels Biofuels use plant-based fuels to produce
Biofuels produce greenhouse gases, energy.
but these emissions have much less
effect on the climate system. Why? The
carbon stored in biofuels was part of
the atmosphere only a few years ago,
so releasing it does not change the
composition of the atmosphere. Thus, nuclear power
biofuels are considered to be carbon Nuclear energy is created by splitting the
nuclei of atoms. Although nuclear energy
neutral as long as fossil fuels are not plants do not emit greenhouse gases, they
used to produce them. do produce radioactive waste, thus creating
a different set of problems.

Even if we stopped all use of fossil fuels today,
climate change would not stop entirely. Earth would
continue to warm over the next century due to
greenhouse gases that have already been added to the
atmosphere. However, by switching from fossil fuels
to clean energy sources quickly, we can prevent the
most serious consequences of climate change. Serious
consequences include the following:
• the disintegration of the Greenland and West
Antarctic Ice Sheets, which would raise sea level
by almost 15 m and displace over a billion people
• the extinction of up to half of the world’s species,
including many that have not even been identified yet
• increases in extreme weather events such as heat
waves, floods, and droughts
Iceland once depended on imported coal for
heating. In the past 50 years, however, Iceland has Figure 6 Geothermal plants mine thermal energy from the Earth’s crust.
switched to renewable energy sources, primarily
geothermal and hydroelectricity (Figure 6). How long will it take other
countries to make the change to clean energy sources? The answer to this DID YOU KNOW?
question will likely have a major impact on the future of our civilization. Arctic Bananas
Long summer days and cheap
UNIT TASK Bookmark geothermal power make it possible to
grow tomatoes, cucumbers, roses, and
This information about changing our energy sources might be useful as you work on the even bananas in Iceland. About 90 %
Unit Task described on page 444. of houses are heated using geothermal
power.
IN SUMMARY
• To make climate projections, scientists develop • Switching from fossil fuels to clean energy
scenarios by specifying the amount of greenhouse sources is one of the main ways to reduce the
gases that would be produced under each impacts of human activity on climate.
scenario. These amounts are used to calculate • Clean energy sources include wind power,
how Earth’s climate would change under those geothermal energy, solar power, hydroelectricity,
conditions. biofuels, and nuclear power.
CHECK YOUR LEARNING

1. Give two reasons why it is difficult for scientists to predict 5. Clean energy sources also have their problems. For each of the
exactly how the climate will change in the future. K/U following, suggest one way that it might have a negative effect
2. Describe two complexities about Earth’s climate system that on the environment or on people. K/U A
result in changes happening faster than expected. K/U (a) hydroelectric dams
3. (a) What is a clean energy source? (b) nuclear power stations
(c) biofuel production from corn
(b) Give examples of two clean energy sources that you have
seen being used successfully in Ontario. K/U 6. Suppose your family is making a five-year plan for switching
to clean energy sources. Where will you start? What steps
4. How do climate models take human uncertainty into
will you take? Create a timeline to show when you would
account? A
implement the steps in your plan. C A

10.2 Global Impacts of Climate Change
For thousands of years, the Arctic tundra supported only low-growing
flowering plants, mosses, and lichens because of its cold temperatures and
short growing season. Over the last century, forests of spruce trees have
begun to spring up in this land, where no trees used to grow (Figure 1). Due
to the changing climate, the summer season is getting longer and spruce tree
populations are migrating north.
impacts of climate change effects Changes that are caused by rising global temperatures, by changing
on human society and our natural precipitation patterns, or by other changes in climate are called
environment that are caused by changes
in climate, such as rises in Earth’s global
impacts of climate change. The changes that you learned about in
temperature Section 9.1 are all impacts of climate change. There will be many more
impacts of climate change in the years to come.
DID YOU KNOW?
Disappearing Country
The tiny country of Tuvalu is in
danger of disappearing. Tuvalu is a
series of islands in the Pacific Ocean.
At its highest, Tuvalu is only 4.5 m
above sea level. This country could
disappear within decades if the sea
level continues to rise. Where will the
11 000 people from Tuvalu go?
Figure 1 Spruce trees began growing in the tundra around 80 years ago.
Intergovernmental Panel on Climate

Change (IPCC) a group of several
Expected Changes
thousand climate scientists who have The Intergovernmental Panel on Climate Change (IPCC) was formed
summarized the latest scientific research in 1988 to evaluate the risks of human-caused climate change. As part of
on climate change the IPCC, several thousand climate scientists participate voluntarily in
sharing and synthesizing their work. The IPCC represents a consensus
among scientists internationally (Figure 2). This means that the majority of
scientists support the IPCC’s conclusions regarding the future impacts of
climate change.
Not all scientists are in complete agreement with the IPCC, however.
Some scientists believe that the IPCC reports do not capture the full severity
of the impacts. They argue that humans will probably not reduce their
emissions quickly enough, so the impacts of climate change will be even
Figure 2 In 2007, the IPCC, represented
here by its chairman Dr. Rajendra greater than the IPCC expects. A small minority of scientists believe that
Pachauri, and Al Gore were awarded most of the impacts from climate change will be less severe than predicted,
the Nobel Peace Prize for their work on or even positive. However, the majority of scientists support the IPCC’s
climate change.
conclusions regarding the future impacts of climate change.
To read the IPCC’s reports, The IPCC reports have identified many potential impacts of climate
GO TO NELSON SCIENCE change. Let’s look at four of the main global impacts in more detail.

Rising Sea Level
As glaciers and ice sheets melt and the oceans warm up and
expand, the sea level of the oceans will rise. Low-lying coastal areas,
home to millions of people, will be at increased risk of flooding.
Some island states including Tuvalu and Federated States of
Micronesia may end up below sea level (Figure 3). Bigger countries
such as Bangladesh and the Netherlands could lose large areas of
land. Much of southern Florida is also at risk.
Figure 3 Low coastal areas, such as Bhola Island,
Bangladesh, are vulnerable to sea level rise. Half of
Impacts on Agriculture this island (more than 3000 km2) has eroded away,
Dry regions of the world, such as parts of Africa, may get even less and half a million people are homeless.
rainfall (Figure 4). Crops may be less productive, and millions of
people could experience famine. Other areas, such as the southern
United States and Japan, could have more rainfall, leading to
flooding. Warm, wet weather will probably lead to more damage
from insects and other pests.
Impacts on Ecosystems
Some plants and animals are likely to migrate toward the poles as
their current habitats become unsuitable. As a result, ecosystems
Figure 4 Corn crops during a drought
around the world will change. Biodiversity may be lost. About
30 % of species could become extinct by 2050. Fragile coastal
wetlands could be drowned by the rising seas. Changes in one
population will have repercussions throughout the food web. For
example, climate fluctuations reduce plankton populations. Plankton
is the main food of the North Atlantic right whale (Figure 5). Less
plankton leads to higher mortality in the whale population.
Impacts on Human, Plant, and Animal Health

Pests, diseases, and disease carriers that inhabit warmer climates Figure 5 Fewer than 350 North Atlantic right whales
could spread toward the poles. This includes human diseases, such remain.
as malaria and dengue fever, that are transmitted by mosquitoes
(Figure 6). Climate change also affects plant diseases and pests that
infest crops and forests. For example, the mountain pine beetle that
has destroyed forests in British Columbia is expanding farther north
and higher into the mountains.
Figure 6 Malaria and dengue fever are common

in the equatorial regions of Africa and Asia.
NEL 10.2 Global Impacts of Climate Change 413

Continental Changes
Many impacts are already happening. They will likely become even more
severe in decades to come. Figure 7 describes some possible impacts of
climate change in different regions of the world.
Arctic, Greenland, Antarctic: Glaciers Europe: Glaciers are projected to
and ice sheets are projected to melt, gradually melt, resulting in flooding.
and sea ice and permafrost to decrease. There may be more heat waves and
Species such as polar bears will have more forest fires.
trouble adapting. Traditional ways of life
in the Arctic may be lost.
Asia: There could be water

shortages. Glaciers in the
Himalayas could melt,
North America: There could be causing flooding. Coastal
more forest fires, and more areas will be at risk for
insect and plant pests. Cities increased flooding. There
may experience more heat could be more
waves. Coastal areas could have diarrhea-type illnesses.
increased flooding and storm
damage.
Latin America: Many species in tropical

areas could become extinct. There may
be more flooding. Some agricultural land
could become desert, and crops may be
less productive.
Australia and New Zealand: There
could be water shortages. Important
ecosystems such as the Great Barrier
Africa: There could be more water shortages. Some Reef could become endangered.
agricultural land could become desert. Crops may
Figure 7 Possible global impacts suffer. Low coastal areas where many people live
of climate change projected by could have increased flooding. Mangrove and coral
the IPCC reef ecosystems could be damaged.
RESEARCH THIS CONTROVERSY ABOUT CLIMATE CHANGE

C10-F16-UCOS10SB.ai 4.A., 4.C.
Most climate scientists agree about the causes and possible A. What do you think about the skeptics’ arguments? T/I
consequences of climate change. However, a few skeptics believe B. How do climate scientists counter the claims of skeptics? T/I
that changes in Earth’s climate are just part of natural climate cycles.
C. When scientific studies first linked lung cancer to cigarette
Others agree that human activity is changing Earth’s climate but
smoke, in the 1950s, some scientists argued against these
think that the impacts will not be as severe as generally believed.
new discoveries. Over the years, it has become accepted
1. Research
Ontario Science 10 SBwhat climate change skeptics say about knowledge that smoking affects health. T/I A
the evidence for climate change and about what is
0-17-635528-6 (a) Comment on whether we should be skeptical about new
causing this change. This evidence includes retreating
FN C10-F16-UCOS10SB scientific results when they are first published.
glaciers, increasing average temperatures, and rising
CO sea levels.Crowle Art Group (b) How much evidence should we expect before we make
Deborah major and costly decisions?
2. Find responses on theCrowle
Internet to the claims of these
Pass 3rd pass
skeptics. Look particularly for responses made by (c) What are the dangers of waiting another 10 years before
Approvedprofessional, currently practising climate scientists. making decisions about anthropogenic greenhouse gas
emissions and climate change?
Not Approved

Special Concern for the Canadian Arctic
Scientists have observed that climate change is happening more rapidly in
the Arctic than anywhere else. Under climate projections, this is what is
expected due to the albedo effect.
Regional Problems Due to Climate Change

in the Arctic
Sea ice is melting and habitats are changing as temperatures across the
Arctic rise. These changes have important ecological repercussions for all
species. For example, with less ice, it is harder for polar bears to reach their
food, the ringed seals that live on the ice (Figure 8). In addition, many
people in the Arctic depend on hunting for food and will be affected by
changes in animal populations.
Figure 8 Animal species in the Arctic are being affected by climate change.
Other problems are occurring as well. The coastline is eroding as the

sea ice melts. Communities that were protected by the ice are now more
vulnerable to autumn storms coming in from the ocean. Traditional
ways of life are being affected because it is dangerous to travel on melting
ice. Permanently frozen soil (permafrost) is beginning to melt, creating
sinkholes and shifting the foundations of buildings and other structures.
Possible Benefits of Climate Change in the Arctic

Less sea ice means that it will become easier for ships to reach the Arctic
and the valuable natural resources there. In addition, ships could follow
much shorter routes by travelling across the Arctic through the Northwest
Passage rather than taking longer, more southern routes (Figure 9).
Trees are beginning to grow in the warmer Arctic climate, helping to
absorb carbon dioxide from the atmosphere. In the future, it may become
Figure 9 The Northwest Passage has, in
possible for farmers to grow crops at higher latitudes, depending on the soil.
the past, been blocked by ice for much
However, having trees and crops in the Arctic will reduce the albedo of the of the year. Now it is becoming passable
tundra (especially in winter) and may result in a net increase in warming. for longer periods.

RESEARCH THIS COMPETITION FOR THE ARCTIC
4.A.
As polar ice melts, many countries are beginning to see A. Which countries do you think could claim rights to natural
possibilities for profit. Rich natural resources may be available to resources found in the Arctic? Explain why. T/I A
Aboriginal peoples to claim. In addition, new routes for shipping B. How could the melting polar ice affect shipping and
may open up across the Arctic Ocean. transportation for Canada and other countries ? T/I
Equipment and Materials: globe; measuring tape C. (a) How much shorter would the shipping route be between
1. Using a globe, research which countries are likely to have a Vancouver and Magadan if the Arctic route could be
political or economic interest in the Arctic. used instead of the Panama Canal route?
2. Measure the distance for a ship to travel from St. John’s, NL, (b) What would be the potential impact on trade between
Canada, to Magadan, Russia. Assume that the ship can travel Canada and Russia? T/I A
through the Panama Canal. D. Explain why so many explorers in the past attempted to find
3. Measure the distance for a ship to travel from St. John’s to the Northwest Passage. A
Magadan if there were no polar ice. E. What impacts might development of the Northwest Passage
4. Research the history of the Northwest Passage. have on traditional ways of life? A
How Can Changes in the Arctic Affect the Rest

of the World?
DID YOU KNOW? Climate change in the Arctic will have major impacts for the rest of
Climate Change Boomtown the world.
The port of Churchill, Manitoba, on • Albedo effect: As Arctic ice melts, the ocean and land will reflect less of
the west coast of Hudson’s Bay, may the Sun’s energy and absorb more. As a result, the Arctic will warm up
benefit from climate change. The port
faster than it would otherwise. Energy absorbed by the Arctic surface
is likely to see increased shipping with
the possible opening of the Northwest will be spread around the world by the climate system.
Passage. Unfortunately, the reduced • Release of carbon dioxide: Earth’s permafrost may contain more stored
ice also means that polar bears carbon dioxide and methane than exists in the atmosphere today. The
wander into town looking for food.
permafrost in Canada, Alaska, and other parts of the world has already
started to melt. If large amounts of carbon dioxide and methane are
released by melting permafrost, the greenhouse effect would be further
enhanced, and Earth’s climate could change much faster than expected.
• Sea level rise: More water will flow into the oceans as the Greenland ice
sheet and glaciers in Canada, Alaska, and Russia melt.
• Ocean currents: Fresh water flowing into the Arctic Ocean from
melting ice may slow or even stop ocean currents that transport thermal
energy around the globe (thermohaline circulation). Ocean currents
affect the climate in many countries.
• Biodiversity: Many migratory species have breeding grounds in the
Arctic. If the Arctic ecosystems change, this could affect species around
the world (Figure 10).
• Changes in shipping and transportation: As the polar ice cap melts,
ships will be able to travel through the Arctic en route to other
Figure 10 The Arctic is an important
habitat for many species of migratory locations. The shorter route will save thousands of kilometres and
birds. reduce transportation costs and energy use.

CITIZEN ACTION
How Can We Protect the Arctic?
Climate change cannot be stopped entirely. The greenhouse
gases that we have already emitted will affect Earth’s climate
for many years to come. However, the impacts of climate
change can be reduced.
Think about things you can do in your own community to
protect the Arctic from climate change. Put your suggestions
into a short article for your local newspaper or for an e-zine.
Your article should persuade others that the Arctic should be
protected. The suggestions should be practical actions that the
average citizen can do.
UNIT TASK Bookmark

Think about the impacts of climate change that are mentioned in this section as you work
on the Unit Task, page 444.
IN SUMMARY
• The Intergovernmental Panel on Climate Change • Impacts of climate change will affect human society
(IPCC) has summarized the latest scientific and the natural environment, including agriculture,
research on climate change. ecosystems, and the spread of pests and diseases.
• Changes expected around the world include • Climate change is occurring more rapidly in the
increased temperatures, shifting precipitation Arctic than anywhere else.
patterns, and a rise in sea level. • Climate change in the Arctic will have economic
and ecological repercussions worldwide.
CHECK YOUR LEARNING

1. Choose one of the following impact areas of climate change. 4. Why is it important to have a strong consensus among
• rising sea level climate scientists regarding climate change? A
• changes to agriculture 5. Explain why the melting of permafrost in the Arctic may start
• changes to ecosystems another positive feedback loop that further contributes to
• increased spread of diseases climate change. K/U
Describe how your chosen impact could affect Earth and its
6. Climate change in the Arctic will have major impacts on the
people over the next century. A
rest of the world. Choose one of the six areas below. Describe
2. For each of the four climate change impact areas listed in in several sentences why it will be negative or positive (or
question 1, name a country that might suffer severely. Briefly both) for the rest of the world. Be prepared to share your
describe how each country would be affected. T/I thoughts with your peers. A
3. Explain how the albedo effect of polar ice means that the • albedo effect and ice • sea level rise
largest climate change in Canada will occur in the Arctic • release of carbon dioxide • biodiversity
and not in southern Ontario. You may need to refer back to • ocean currents • navigation
Section 8.10. K/U

SCIENCE OSSLT
Geoengineering to Combat Climate Change?

Some scientists are trying to figure out ways to use technology on Farming Algae
a global scale to address the issue of climate change. This kind of Bags, vats, or tubes of algae can be used to absorb the carbon
problem-solving is called geoengineering : the use of technology dioxide produced by power plants and other factories (Figure 3).
to modify Earth’s environment. Here are just three of the many The algae can be processed into fuel.
geoengineering ideas out there. Do you think they would work?
Mirrors in Space
Mirrors could be used to reflect some of the Sun’s radiation back
into space to decrease Earth’s temperature (Figure 1). To balance
out the effect of climate change, it would take 55 000 mirrors
orbiting Earth, each 100 km2 in size. Alternatively, we could
imitate a volcano by spraying millions of tonnes of sulfur into the
atmosphere. The sulfate droplets would act like tiny mirrors.
Sun
Figure 3 Farming algae
Risks of Geoengineering
There are many ways of using technology to counter climate
change. However, intentionally changing Earth’s climate system
could be a very bad idea. Why? Here are just a few of the reasons
why geoengineering is a big risk:
• We cannot predict all the consequences of changing Earth’s
Earth mirrors
climate. A geoengineering project could have enormous side
effects and cause great harm. For example, sulfate droplets in
Figure 1 Mirrors in space the atmosphere are known to damage the ozone layer and to
Fertilizing the Oceans cause acid rain.
During photosynthesis, plants capture carbon dioxide from the • The projects may not work out as expected. For example,
atmosphere. Scientists are investigating the effects of adding research shows that dumping fertilizer into the ocean may not
fertilizers to the ocean to increase algal growth (Figure 2). The result in as much carbon dioxide removal as hoped. And as
algae would then absorb carbon dioxide from the atmosphere. soon as you stop putting in the fertilizer, the ocean stops
absorbing carbon dioxide.
C10-F33-UCOS10SB.ai • Geoengineering might cause people to assume that climate
change is “being taken care of.” People might stop reducing
their emissions of greenhouse gases.
UCOS10SB
rt Group Geoengineering cannot fix the problems of climate change all by
itself. However, it could provide us with a backup plan if Earth’s
Crowle
climate begins to change even more suddenly than expected.
Figure 2 Fertilizing the oceans OSSLT
418 NEL
Impacts of Climate Change on Ontario 10.3
Canada and other high-latitude countries have already experienced
greater temperature increases than low-latitude countries. Canada could
therefore expect greater warming in the future than many other countries.
For example, with moderate greenhouse gas emissions by 2100, Ontario’s
average temperature could increase by 3 to 6 °C in the winter and 4 to 8 °C
in the summer.
What would this feel like? A recent study shows that the climate of DID YOU KNOW?
southern Ontario has already become similar to the climate of upstate New Small Difference—Big Effect
York just 20 years ago. By the end of the century, Ontario’s winters might Small changes in Earth’s average
match those in Pennsylvania today, and our summers might be as hot and temperature can cause large changes
in climate. The difference between
humid as northern Virginia’s (Figure 1). today’s average temperature and
that of the last ice age is estimated
to be less than 10 °C. If we continue
consuming fossil fuels, Earth’s
ATLANTIC
temperature could increase by a
OCEAN
similar amount within the next
100 years.
Current
Winter
by 2095
Summer
by 2095
(a) (b)
Figure 1 In 100 years, Ontario’s summers might be as warm as Virginia’s summers are today.
0 250
temperature and Precipitation

Some of the changes to Ontario’s climate could be considered positive. Our
winters will probably become warmer, with fewer extremely cold days and
less snow (Figure 2). As a result, heating costs may go down, and it will be
easier to keep the roads clear of snow and ice. There may be less ice coverage
C10-F17-UCOS10SB.ai
on the Great Lakes, leading to longer shipping seasons.
There are likely to be more negative than positive changes, however. For
example, there would be more extremely hot, humid days in the summer.
There will also be many more heat waves. Both of these affect human health Figure 2 Warmer winters may be
good for some people, but will affect
(see page 421).
winter sports such as snowboarding
Precipitation patterns in Ontario are likely to shift in the future. There will and skiing.
likely be more rainfall overall, but some areas will become drier, whereas others
will become wetter. The frequency of heavy rainstorms will probably increase.
Rain events will probably be heavier, with long dry spells between rainstorms.
0-17-635528-6
Changing lake levels
C10-F17-UCOS10SB
FN
The level of Lake Superior has dropped significantly over the last few years.
CO Crowle Art Group
Scientists have not yet positively identified the cause, but climate change is
Deborah Crowle
likely to be a contributing factor. The other Great Lakes have not changed
Pass 2nd pass
as significantly, but changes may occur as temperatures increase. Higher
Approved
temperatures mean that there will be less ice cover on lakes in the winter.
Not Approved
More water will evaporate year-round as the air warms. However, increases
in precipitation may counter some of the losses due to evaporation.
NEL 10.3 Impacts of Climate Change on Ontario 419
As the lake water warms, fish that live in cold water, such as trout,
may migrate north or die out. Algae would grow faster in warm weather,
resulting in foul-smelling water and beaches when the algae die and
decompose. Invasive species such as zebra mussels and lamprey could
increase in numbers and disrupt local ecosystems.
Ecosystems
Studies are now examining how Canadian ecosystems are adapting to
current changes. Some tundra plants are flowering earlier and reproducing
faster in northwest Newfoundland and Labrador. Figure 3 shows how
ecoregions in Canada would change if atmospheric carbon dioxide
concentrations were doubled and if climate were the only factor involved.
Factors such as soil type also determine where plants and animals can live.
This makes it difficult to predict which species will survive and which will
become extinct.
Present day Doubled CO2 atmosphere tundra

(about the year 2060)
boreal
temperate
grassland
semi-arid
unclassified
(a) (b)
Figure 3 Ecoregions will move northward as carbon dioxide concentrations and temperatures increase.
Some animals in southern Ontario, such as white-tailed

deer and cardinals, can adapt to or even benefit from
higher temperatures. Plants and animals that thrive in
C10-F32-UCOS10SB.ai
colder temperatures, including black spruce and moose,
are likely to migrate farther north over time.
Plants and animals from the United States could move
north into Canada as temperatures rise. These new species
would disrupt existing ecosystems. Some local species
could become endangered or extinct.
Kudzu is a fast-growing vine that spreads over buildings,
Ontario Science 10 SB trees, power lines, and anything else in its way (Figure 4).
0-17-635528-6 The southern U.S. states spend millions of dollars each year
FN C10-F32-UCOS10SB tearing kudzu off buildings. Currently, kudzu is limited
CO Figure 4 Kudzu isCrowle Artplant
Group to the United States because it cannot survive the cold
an invasive that grows over almost
Deborah
anything. It may arrive Crowle
in Ontario as the average winter Canadian winters. If winters become warmer, kudzu could
temperature
Pass rises.
2nd pass move northward into Canada.
Approved
Not Approved
disease and illness
Disease-carrying organisms may increase as average temperatures rise and Epidemiology is a field of
medicine that deals with the
precipitation patterns change. The risk of West Nile virus, already appearing incidence and distribution of
in Ontario, could increase. Lyme disease, which is carried by deer ticks and diseases. To learn more about
the work of an epidemiologist,
causes fever and a skin rash, could become a worse problem in Ontario
go to nElson sCiEnCE
(Figure 5).
(a) (b)
Figure 5 (a) Lyme disease is caused by a bacteria spread by deer ticks. (b) The ticks are carried by
deer, squirrels, and other small mammals.
Worsening heat waves are likely to increase heat-related illnesses and deaths.
DID YOU KNOW?
For example, heat stress often sends people to the hospital and can cause
Smog Gets Worse
strokes. In addition, car exhaust reacts with sunlight to produce ground-level Although smog is not caused by
ozone, a component of smog. This reaction happens faster in warmer air, so climate change, increased temperatures
smog will worsen as temperatures increase. Increasing air pollution would be will make it worse. Smog is a serious
bad for people who have asthma or other respiratory illnesses. concern in cities around the world. The
annual “cost” of smog for Ontario is
$10.8 billion. In 2005, smog contributed
agriculture to the premature death of 5800 people
Spring would come earlier as the climate warms, and the growing season in Ontario, and resulted in 17 000
additional hospital visits. By 2015,
for crops and other plants would lengthen. Some crops, such as soybeans
smog could cause 10 000 premature
and corn, could benefit from warmer temperatures and increased carbon deaths per year.
dioxide concentration in the atmosphere. However, these factors could
also encourage the growth of unwanted plants. Farmers may need to use
more herbicides than they do now. An increase in smog would also damage
agricultural crops.
Southern Ontario farmers might be able to grow fruits and vegetables To learn more about how
that normally grow farther south. In Yukon and the Northwest Territories, climate will impact Ontario’s
agriculture,
farming may become more viable, depending on the soil. Land in the Arctic
could become useful for agriculture as the permafrost melts.
Forests
Studies show that the rain in Ontario could occur in shorter, heavy bursts,
with long dry spells in between. Summers are expected to be hotter and
drier, resulting in more forest fires. Insect pests could migrate northward,
attacking the southern fringes of our forests. Southern plants could survive
the warmer winters and increase in numbers.
Close to 50 % of the land area of Ontario is currently covered by boreal
forest (Figure 3). This area could shrink as the ideal climate for Canadian
forests shifts northward. As our forests become less healthy, they may become
a carbon source rather than a carbon sink. The invasion of the pine beetle has
already caused the forests in British Columbia to become carbon sources.
NEL 10.3 Impacts of Climate Change on Ontario 421

reaDinG TIP Electricity use
Synthesizing As summers get hotter, we will use more electricity for air conditioning.
After reading a text, a powerful way of
Generating electricity from coal or natural gas produces greenhouse gases,
synthesizing is to draw a conclusion
about what you have just read: which makes the problem of climate change worse. In the winter, energy
What I already know about the use may decrease due to warmer weather.
concept  What I read in the text  In Ontario, about a quarter of our electricity is produced using
What I think now about the concept. hydroelectric power, which does not produce greenhouse gases. During
heat waves, however, people might try to use more electricity than can be
produced, leading to blackouts (Figure 6). In addition, less hydroelectricity
will be available if the lake levels drop because of climate change. This could
increase our use of fossil fuels.
Figure 6 Blackouts could occur more

often as Canadians use more electricity
to cool their homes and offices.
In the next section, you will learn how actions by individuals,

businesses, cities, and governments can help prevent the most severe
impacts of climate change from occurring in the Arctic and elsewhere.
in sUMMaRY
• Changes expected to Ontario’s climate include • Other possible eff ects include changing lake
warmer winters and more extremely hot days in levels, higher risk of insect-borne diseases and
the summer. Precipitation patterns are also likely heat-related illnesses, a longer growing season,
to change. increased energy use in summer, and decreased
• Ontario’s boreal forest will likely shrink, and energy use in winter.
plant and animal species will migrate northward.
chEcK Your LearninG

1. Suppose you are a climate researcher in northern Ontario. 4. List several species that might migrate away from southern
You want to study the effects of climate change on local Ontario as our climate changes and several species that
ecosystems. List three factors you could study in the area might migrate into southern Ontario. K/U
to monitor the effects of climate change. K/U 5. List four factors, related to climate change, that might
2. (a) Create a table headed “Risks” and “Benefits” to compare negatively affect Ontario’s forests. K/U
the positive and negative impacts of climate change for 6. A warmer climate may lower lake levels, which would
Ontario. reduce the capacity to generate hydroelectricity, which
(b) Some people say that Canada could benefit from a warming would increase electricity production from fossil fuels,
climate. Write a short paragraph giving your opinion on this. which would lead to a warmer climate. K/U A
Refer to some of the points in your table. C A (a) Is this a negative or a positive feedback loop?
3. How is climate change likely to affect Ontario’s agriculture? K/U (b) What can the Ontario government do to break this loop?

Taking Action to Limit Climate Change 10.4
Climate change is already occurring, and scientists know that some
additional climate change is inevitable. Our climate will continue to change
this century because of greenhouse gases that we have already emitted. How
much the climate changes will depend on decisions that we make now and
in the next few decades. There are many actions we can take to keep our
climate from changing too drastically. Actions taken to reduce unwanted mitigation reducing an unwanted change
change are referred to as mitigation. by deliberate decisions and actions
deciding How Quickly to reduce

greenhouse gas Emissions
Global temperatures have already risen by 0.74 °C over the last 100 years. reaDinG TIP
Most scientists agree that we should limit increases to 2 °C to avoid the most Synthesizing
dangerous impacts of climate change, including drastic sea level rise and species Synthesizing means joining different
extinctions. How do we limit temperature increases to 2 °C? Climate models things together to make something
suggest that atmospheric concentrations of greenhouse gases must stabilize at new. Think of combining 400
no more than the equivalent of 450 ppm of carbon dioxide. Even staying at this individual pieces to complete a
concentration gives us only a 50 % chance of limiting warming to 2 °C. jigsaw puzzle. Or imagine being
a crime scene investigator and
How much would we have to cut our pollution emissions to reach this
combining a variety of clues to solve
goal? To have a chance of stabilizing greenhouse gas concentrations at a crime. When synthesizing a text,
450 ppm by 2050, all industrialized nations would have to cut their annual look for ways to combine clues to
greenhouse gas emissions by 80 % relative to their emissions in 1990 (Figure 1). understand the main idea.
Developing countries would need to begin reducing their emissions 10 to 20
years after industrialized nations began their reductions. Ontario’s provincial
government has already committed to this 80 % reduction. The Canadian
federal government has not.
Greenhouse Gas Emissions in Canada since 1990

800
700
GHG Emissions (Mt CO2 eq)
600 Canada’s Kyoto

target for 2012
500
400
300
200
80% reduction
100
target for 2050
0 Figure 1 Canada’s greenhouse gas
1990 1992 1994 1996 1998 2000 2002 2004 2006 (GHG) emissions since 1990
the Canadian government and

Climate Change
The Canadian government is working with many governments around the
world to reduce greenhouse gas emissions. In 2002, Canada agreed to join
the Kyoto Protocol. This international treaty set short-term mitigation goals. Kyoto Protocol a plan within the United
It requires industrialized countries to reduce their emissions of greenhouse Nations for controlling greenhouse gas
emissions
gases to specific concentrations by 2012.
NEL 10.4 Taking Action to Limit Climate Change 423
In December 2007, the United Nations Climate Change Conference
in Bali announced a plan. They decided to develop a new international
agreement to limit the impacts of climate change. This new agreement was
the topic of the Framework Convention on Climate Change in Copenhagen,
Denmark, in December 2009. About 170 nations participated. The
Copenhagen Agreement will take effect in 2013, the year after the Kyoto
Protocol expires.
About 70 % of the Canadian public supported the Kyoto Protocol. There
was also some vocal opposition. The government of Alberta protested that
thousands of jobs in the fossil fuel industries would be lost (Figure 2). Other
industries also have objections.
In 2006, Canada’s prime minister announced that we would not meet our
Kyoto targets by 2012. Instead, the government issued a Notice of Intent in
which it promised to develop a plan to regulate industrial greenhouse gas and
air pollutant emissions. Some of the opposition parties, however, saw this as
an excuse for not keeping Canada’s Kyoto commitments.
In April 2007, the government unveiled its Turning the Corner Plan to
reduce greenhouse gases and air pollution. In March 2008, after consulting
with environmental and industrial groups, the federal government announced
further details of its greenhouse gas regulations. The government claims that it
is now putting into place one of the strongest climate change programs in the
world. The focus of its program is an absolute 20 % reduction in greenhouse
gases from the year 2006 to 2020. The plan also mentions a reduction of 60 %
to 70 % by 2050, although this is not emphasized.
The international community is criticizing Canada for not living up to our
Kyoto commitments. How do Canada’s efforts to improve compare with the
efforts of other countries? In 2008, a comparison of the 57 largest greenhouse
gas producers was released. Canada’s efforts at reduction ranked second-last.
In June 2008, the opposition parties in the Canadian government passed
legislation (opposed by the minority government) requiring Canada to cut
greenhouse gas emissions by 80 % by 2050 (Figure 3). This legislation requires
Canada to do its part to mitigate the most serious impacts of climate change.
As you learned in this section, scientists consider that a reduction of 80 % by
2050 is necessary to keep Earth from warming up by more than 2 °C. As this
textbook is being written, the new legislation has not yet been implemented.
Figure 2 The Alberta oil sands provide a large financial return and many Figure 3 Opposition parties supported the Climate Change
jobs. Extracting, processing, and using fossil fuels from the oil sands also Accountability Act.
produce enormous quantities of greenhouse gases.

The European Union is aiming to limit global temperature increases to 2 °C. To find out more about Canada’s
Canada’s target, an 80 % reduction, only gives a 50 % chance of keeping the current position on reducing
global increase below 2 °C. To ensure that warming is limited to 2 °C, the greenhouse gas emissions,
European Union may need to reduce its emissions by even more than 80 %. go to nelson science
Provincial and Municipal Governments

and Climate Change
The government of Ontario introduced Go Green: Ontario’s Action Plan on
Climate Change in August 2007. This action plan includes the following:
• the decision to stop burning coal at Ontario’s four remaining coal-fired
generating stations by 2014
• targets to reduce Ontario’s greenhouse gas emissions by 6 % by 2014,
15 % by 2020, and 80 % by 2050
• a public transportation plan for 902 km of new or improved rapid transit
routes in the Greater Toronto Area and Hamilton (MoveOntario 2020)
• a fund to support green technologies and businesses in Ontario
• the planting of 50 million trees in southern Ontario by 2020
• a plan to work with a panel of leading scientists and environmental experts
who will make recommendations on how Ontario can adapt to climate change
• legislation to fast-track the approval of renewable energy projects, such
as wind turbines, rather than putting them through long municipal
processes for approval
Between 2004 and 2006, Ontario’s greenhouse gas emissions decreased in To learn more about Ontario’s
most sectors of the economy, but overall they were still 7 % higher than in Action Plan on Climate Change,
1990 (Figure 4). go to nelson science
Ontario’s Total Greenhouse Gas Emissions Over Time

205
200
Greenhouse gas emissions
195
190
(Mt CO2-eq)
185
180
175
170
Figure 4 The decrease in greenhouse
gas emissions between 2004 and 2006
165 is primarily due to a reduction in the use
160 of coal-fired generating plants and the
1990 2004 2005 2006 mild winter in 2006 that reduced natural
Years gas use.
Local governments in Canada have started to conserve energy and reduce

greenhouse gas emissions.
• The City of Toronto is planning a 6 % cut in greenhouse gas emissions
(relative to 1990 levels) by 2012. This amounts to a 30 % cut by 2020,
and an 80 % cut by 2050.
C10-F36-UCOS10SB.ai
• The City of Calgary is achieving its target of 6 % below 1990 concentrations
ahead of time. It is committed to reducing emissions by 50 % by 2012.
• The City of Halifax has introduced a composting program to reduce
greenhouse gas emissions (Figure 5). Figure 5 Halifax, Nova Scotia

REsEaRch This Greenhouse Gas emissions in Your CommunitY
SKILLS: Researching, Identifying Alternatives, Analyzing the Issue, Defending a Decision, Communicating SKILLS HANDBOOK
4.a.
1. Research what projects your municipal government is D. Imagine you were running for office in your municipality
engaged in to reduce greenhouse gas emissions. Examine in the next local election. Develop a platform regarding
the government website and look at their publications. greenhouse gas emissions in your community. Would you
2. Find out how people in your municipality feel about the expand what is already happening, reduce it, or continue it
local projects and whether they have any other ideas. as is? A
A. Describe three projects being undertaken by your municipal E. Present your platform to the class as a short skit, in which
government to reduce greeenhouse gas emissions. the candidate presents their platform to a “citizen” at the
door. Alternatively, create a short campaign video, song, or
B. What are the costs of these projects to the average person or
poster. C
residence in your community? T/A I A
C. Do people in your community agree with what is being done?
Do they feel that the projects are effective? Are they willing
to pay the additional costs? A
What Canadian Businesses, industries,

and governments Can do
Some specific actions that can be done in Canada to reduce our emissions of
greenhouse gases are listed below. Compare this list with Table 1 in Section 9.5.
transPortation
• Use less fuel by driving more effi
ciently (less idling, less harsh
Figure 6 Several car companies now
make hybrid cars. acceleration and braking).
• Use fuels that produce fewer or no greenhouse gases.
• Use hybrid (part gasoline-powered, part electric) or electric vehicles
(Figure 6).
• Drive less and increase travel by rail, public transit, cycling, and walking.
• Support government-imposed restrictions on pollution levels or
incentives for lower emissions and better fuel efficiency.
Figure 7 Wind turbines do not produce

ProduCing EnErgY
greenhouse gases. • Improve energy effi
ciency through new technologies.
• Use clean energy sources, such as wind and solar (Figure 7).
industriEs
• Use more effi
cient equipment to consume less energy.
• Recycle energy (e.g., by capturing thermal energy produced by
industrial processes and using it to power other processes).
• Capture and store carbon dioxide released by smokestacks (Figure 8).
Figure 8 Devices in smokestacks can • Impose taxes and limits on fossil fuel use.
remove carbon dioxide from industrial
emissions.

Building and ContraCting
• Increase energy efficiency (Figure 9).
• Install better insulation.
• Introduce rebates or tax incentives for insulating and energy efficiency.
agriCulturE
• Restore polluted land so that it absorbs more carbon than it emits
(Figure 10). Figure 9 New appliances have an
• Study and implement ways to reduce methane emissions in rice and energy consumption label.
cattle farming.
• Use less nitrogen fertilizer to reduce nitrous oxide emissions.
WastE ManagEMEnt
• Collect methane from landfills and use it for energy.
• Compost all organic waste so it does not go to a landfill.
• Reduce the volume of waste generated.
• Reduce consumption by avoiding the purchase of unnecessary materials. Photo ® Toronto and Region Conservation.
All Rights Reserved.
• Recycle (Figure 11). Figure 10 Planting native plants
can help restore polluted land while
ForEsts removing carbon dioxide from the air.
• Plant more forests and replace trees that are cut down (Figure 12).
• Reduce deforestation.
• Manage forests carefully so that they are carbon sinks, not sources.
• Produce and use fuels from waste forestry products (biofuel) instead of
fossil fuels.
Industries and businesses in Canada are also taking steps to reduce their
emissions of greenhouse gases. Among others, Alcan, DuPont, General
Motors, IBM, the Mining Association of Canada, and the Canadian Figure 11 Recycling reduces the
Chemical Producers’ Association have all made substantial cuts in their amount of waste going to landfills.
greenhouse gas emissions.
adapting to a Changing Climate

In this chapter you have encountered many ways in which you can help
reduce the most severe impacts of climate change. Even if we take all these
steps, some changes in climate will still happen. It is important to plan for
climate change that is going to happen. Planning how to deal with future
climate changes is called “adaptation.” It is a sensible approach for any person Figure 12 Replacing trees when they
or organization to take. are cut down helps maintain the amount
City governments are deciding how to deal with increased heat waves and of carbon being absorbed.
flooding in the future. Forest managers are planning how to handle more
frequent wildfires and insect infestations. People who work with protected
species are considering ways to help species migrate and cope with higher
temperatures. Researchers are studying how farmers can grow crops that
survive higher temperatures.

We can limit the most severe impacts of climate change by taking action to
reduce our emissions of greenhouse gases. In the next two sections you will
learn more about appropriate actions and when we should take these actions.
However, we must also prepare for expected changes in climate.
UNIT TASK Bookmark

How can you use this information on large-scale steps to reduce climate change as you
work on the Unit Task described on page 444?
in sUMMaRY
• To avoid the most dangerous impacts of climate • In 2007, legislation was introduced that calls for
change, we should aim to limit increases in reducing greenhouse gas emissions 80 % from
global temperature to 2 °C. This requires limiting 1990 levels by 2050.
greenhouse gas concentrations to 450 ppm. • Canadian businesses, industries, and
• Industrialized nations will have to cut their governments can reduce emissions by switching
greenhouse gas emissions at least 80 % by 2050 to to clean energy sources, reducing emissions
meet the limit of 450 ppm. from cars and airplanes, conserving energy, and
• In 2002, the Canadian government joined the managing farms and forests better.
Kyoto Protocol, agreeing to reduce emissions by • We can adapt to climate change by planning and
6 % of 1990 levels. Since then, our emissions have preparing for changes.
continued to increase, and Canada will not meet
its 2012 targets.
chEcK Your LearninG

1. Why is some change in our climate inevitable? K/U 5. Adapting to climate change and mitigating further climate
2. Why is it important that the world not put all of its resources change will be very costly and controversial. Nevertheless,
into adapting to climate change but use a large part of its it needs to be done. C A
resources for mitigation of climate change? T/I (a) Suggest several actions that our federal, provincial, and
3. For each of the following categories, state one action that municipal governments can take before they bring in any
will help reduce the impacts of climate change: K/U further, costly legislation to deal with climate change.
(a) transportation (b) When the time comes to act, will governments
be able to do it in a way that satisfies everyone?
(b) energy production
Include people who depend on fossil fuel production
(c) energy conservation and consumption for their livelihood. Give your own
(d) forests suggestions.
4. Scientists believe there is a maximum temperature 6. Some changes in climate are inevitable. Therefore, people
increase that we must not allow the Earth to pass. K/U are beginning to plan on how to adapt to a changing
(a) Earth’s temperature has already risen by 0.74 °C. To climate. K/U A
what maximum temperature rise do these scientists (a) List four ways in which people and governments are
hope to limit Earth? preparing to adapt to climate change.
(b) To keep Earth within this temperature rise, what is the (b) Think of two additional examples, not mentioned here,
maximum concentration of greenhouse gases we must of things people might have to do to adapt to a changing
allow by the year 2050? climate in the next 30 years. (Hint: Think about recreation,
(c) To keep the maximum concentration to the number tourism, outdoor work, etc., in summer and winter.)
you mentioned in part (b), by how much must the
world reduce its annual production of greenhouse
gases by the year 2050?

What Can Individuals Do? 10.5
Most of the impacts of climate change are expected to occur to some degree
even if humans quickly switch to clean energy sources. The risk of dangerous
impacts such as extreme sea level rise and massive species extinctions
increases if we take longer to make changes. The main reason to take action
is that not taking action will have dangerous consequences for us all. Not
taking action could harm millions of people. It is easy to make lists about what
actions large groups should be taking. We should also look at what each of us
can do. What is our role, as individuals, in reducing climate change?
Personal Greenhouse Gas Emissions
reducing Your Emissions from Energy Use in Canada
More than one-third of Canada’s greenhouse gas emissions come water heating 11 %
from the activities of individuals. Most of the greenhouse gas lighting 2 %
emissions come from transportation and home heating and cooling appliances
(Figure 1). This is good news because it means that you, your and lights 8 %
friends, and your family can make a genuine difference by reducing transportation
your own emissions of greenhouse gases. home 50 %
heating and
There are many ways to conserve energy and reduce your cooling
greenhouse gas emissions. Here are just a few. Many of them will 29 %
even save you money.
• Walk, bike, take public transport, or carpool to school.
Data from Environment Canada
• If buying a car, choose the most fuel-effi cient one you can
Figure 1 Personal greenhouse gas emissions from
afford. Maintain it regularly to keep it running efficiently. energy use in Canada
• Switch off lights and unplug appliances, such as computers and
televisions, which use electricity on standby when they are not in use. reaDinG TIP
• Fly less, to reduce the amount of pollution (including greenhouse gases) Existing Knowledge
emitted by airplanes and by the production of airplane fuel. You have a treasure chest of
• Use air conditioners and heating only when necessary. Use a knowledge stored in your memory.
programmable thermostat to turn down the heat when you do not need it. Use it to make connections with
ideas or information in a text. Ask
• Plant trees that are native to your area. Trees absorb carbon dioxide, and
yourself what you already know that
native trees will not harm local ecosystems.
relates to the text. For example, for
• Turn off the water when you brush your teeth or shave. Take short showers. the topic of energy conservation,
Conserving water saves energy because fossil fuels are used to heat the water. has your family made a change,
What else could you add to this list? recently, to reduce their energy use?
REsEaRch This BuYinG enerGY star ® aPPLianCes

SKILLS: Researching, Identifying Alternatives, Communicating SKILLS HANDBOOK
4.a.7.
Buying energy efficient appliances can save money and reduce A. Write a brief (one page) description of the ENERGY STAR®
greenhouse gas emissions. In Canada, qualified ENERGY STAR® program. T/I C
products must meet technical specification to ensure that B. What ENERGY STAR® rebates and incentives are available
products are energy efficient. to Ontario residents? T/I
1. Research the ENERGY STAR® program. C. What options are available to dispose of old appliances?
2. Research what problems the disposal of old appliances might What environmental problems might they cause? T/I A
cause and where old appliances are disposed of. D. What ENERGY STAR® appliances do you have in your
home? K/U
NEL 10.5 What Can Individuals Do? 429

REsEaRch This eatinG LoCaL
SKILLS: Defining the Issue, Researching, Communicating, Evaluating SKILLS HANDBOOK
4.a.4., 4.C.
Preparing and transporting foods consumes a great deal of A. Some people try to “eat local.” What issue are they
energy. Eating local produce and eating fewer processed foods addressing when they make this choice? T/I
can help save energy. B. Write a brief description of the energy that may have gone
1. Research the benefits of eating local produce. Look into processing, packaging, and transporting the frozen
for information on the methods and energy used packaged meal you examined. Compare it with the energy
to transport produce and other foods from other countries. used in cooking a similar meal at home, using local foods. T/I
2. Research the benefits to the environment of growing and C. Evaluate the decision to “eat local.” Explain your
eating organic food. evaluation. A
3. Go to a grocery store and look at a frozen packaged meal. D. How might switching from conventional farming to organic
Examine the components and the packaging. See if the farming give local ecosystems a better chance of adapting to
package says what city the meal comes from. changes in climate? K/U A
4. Research Community Supported Agriculture (CSA). Locate E. Would you consider buying produce from a CSA farm?
at least one CSA farm near you. Explain why or why not. T/I A
Carbon offset Credits

Even committed environmentalists such as David Suzuki say that it is impossible
to reduce our greenhouse gas emissions to zero, no matter how hard we try.
However, we can achieve “carbon neutrality” by purchasing carbon offset credits.
When we purchase credits in clean energy programs such as new wind energy
farms or solar power, we reduce the burning of fossil fuels (Figure 2). In this
To learn more about carbon way, we offset carbon dioxide (and other greenhouse gas) emissions. Similarly,
offset credits,
when we purchase credits for reforestation in Brazil, we are increasing carbon
sinks; thus, we help offset the increase in atmospheric carbon dioxide.
(a) (b)
Figure 2 Buying credits in renewable energy sources such as (a) solar power or (b) reforestation
projects can offset your greenhouse gas emissions.
You may hear criticisms of the carbon offset program. Some people feel it
is a way for rich westerners to ease their conscience and continue their fossil
fuel–intensive lifestyle. Many organizations suggest that we should purchase
carbon offset credits only after we have made a strong effort to minimize our
carbon footprint. Others believe that organizations receiving carbon offset
credit payments do little with the money. For these reasons, it is important
to deal with certified carbon offset organizations.

CitiZen acTiON
Everyone Can Make a Difference
Work with a partner or in a small group to brainstorm specific Try to persuade others to join you in taking action. Consider
actions that you, your school, or your community can take to putting on a skit, developing a performance art piece, or
mitigate or adapt to climate change. Your suggestions must be creating a video and posting it online.
practical. Present your actions on a poster or as a presentation
in your school or in a local library or shopping mall.
Climate Change and stewardship

Stewardship is an old concept that is coming back into focus in Ontario. This
term means the careful management of something that one does not own. We
now realize that Earth has not been given to us to exploit for ourselves but to
manage responsibly for our children. One of the worst inheritances we could
leave to future generations would be an Earth spoiled by our extravagance.
The Ontario Ministry of Natural Resources (MNR) has an interesting
stewardship program for 17-year-old students. Every summer, they employ
“Ontario Stewardship Rangers” to work on a variety of projects. These
include conducting forest research, planting trees, and studying species at
risk (Figure 3). The MNR also supports a volunteer organization for adults To learn more about Ontario
to get involved in caring for Ontario’s environment and dealing with climate stewardship programs,
change. This organization is called Ontario Stewardship. go to nElson sCiEnCE
Figure 3 Ontario Stewardship Rangers

may rehabilitate wetlands, carry out
ecological research, or create wildlife
habitats.
You read above that stewardship is not a new idea. In fact, it has been DID YOU KNOW?
part of many cultural, traditional, and religious beliefs throughout human Deforestation in the Amazon
history. If you or your family is affiliated with a particular tradition, you Rainforest
might like to find out what viewpoint it takes with regard to climate change Much of Earth’s deforestation is taking
place in the Amazon rainforest as
and stewardship.
people clear land for farming. We could
Ultimately, how we think about our environment concerns values. protect the rainforest and reduce further
Ontario’s science curriculum says, “Values that are central to responsible emissions by providing support to
stewardship are: using non-renewable resources with care; reusing and developing nations in the Amazon region.
recycling what we can; switching to renewable resources where possible”
(The Ontario Curriculum: Grades 9 and 10 Science, 2008 (revised), page 5).
The impacts of climate change may seem too large or global to be affected
by your personal choices, but they are not. Choices made by you, your
To take the One Less Tonne family, your school, and your community can make a big difference. You can
challenge and learn how you
can reduce your greenhouse help limit further climate change by reducing your emissions of greenhouse
gas emissions, gases. There are important reasons why you should take action. Some are
go to nElson sCiEnCE discussed below.
to ProtECt PEoPlE’s HEaltH

A warming climate would increase smog levels in cities. By reducing
emissions of greenhouse gases, you can improve air quality and
prevent further pollution (Figure 4). Switching to non-motorized
activities (canoeing instead of power boating, and walking or biking
instead of driving) is good for the planet and for your health. In
Figure 4 addition, eating less meat and fewer packaged foods is a good choice.
to saVE MonEY
Adapting to a different climate is likely to be very expensive for cities,
governments, and individuals. Reducing emissions of greenhouse
gases can be costly in the short term but could save money in the long
term by preventing extreme climate change (Figure 5). Also, being
energy efficient saves money and reduces emissions.
Figure 5
to iMProVE Your CitY or toWn
Many of the actions that reduce greenhouse gases have additional
positive results for our cities and our health. For example, reducing
energy consumption—perhaps by developing communities that
require less car travel—could result in less traffic, less smog, and less
risk of electricity blackouts (Figure 6).
Figure 6 to ProtECt traditional aCtiVitiEs
As plant and animal species migrate into new areas, cultural activities
such as hunting and fishing will change (Figure 7). Reducing climate
change protects these traditional activities. It also protects other winter
activities, such as skiing, and even some summer activities since it
could become much hotter in the summer.
to ProtECt tHE EnVironMEnt

Figure 7
Reducing climate change will discourage invading species that prefer
warmer temperatures. This will help protect native plants and animals
in your region (Figure 8).
Figure 8

UNIT TASK Bookmark
How could you use information about individual reductions in greenhouse gas emissions as
you work on the Unit Task, described on page 444?
in sUMMaRY
• Th
ere are many actions that individuals can take • Some reasons to reduce the impacts of climate
to help limit the impacts of climate change. change include protecting the environment,
• You can change your mode of transportation, protecting human health, saving money,
alter your buying habits, or take action, such as improving your community, and protecting
planting trees in your neighbourhood. traditional activities.
chEcK Your LearninG

1. (a) What one activity does the average Canadian do regularly 8. Suppose that your family is purchasing a new appliance, such
that produces half of the individual greenhouse gas as a refrigerator, stove, or dish washer. You can purchase
emissions in Canada? one model for $400, or you can purchase a second model
(b) Think of four ways that you and your family can reduce almost identical to the first, but much more energy efficient,
greenhouse gas emissions in this activity. K/U A for $600. The energy-efficient model will save your family
$25 in electricity each year. How many years would it take to
2. (a) What activity at the individual level produces the
recover the additional cost of purchasing the energy-efficient
second greatest amount of greenhouse gases for
model, assuming that the additional capital ($200) is loaned
Canadians?
to you interest-free for these years? T/I
(b) Describe how you could reduce your greenhouse gas
(a) if the cost of electricity stayed the same?
emissions in this activity in both summer and winter. K/U A
(b) if the cost of electricity went up 6 % a year on average?

3. In a journal, record all the activities you engage in or see in
your daily life that cause greenhouse gas emissions. With (c) Should cost be the only consideration when buying an
your friends, make a list of suggestions on how to reduce appliance? Justify your answer.
emissions in each of these ways. Prioritize them. A C 9. Use a table, such as Table 1, or a diagram to summarize
4. (a) If you or your family is affiliated with a particular the information in this section, and your response to it. C
cultural, traditional, or religious perspective, find out Table 1
what its viewpoint is with regard to climate change and Section says . . . I think . . .
stewardship. Do you agree with this point
of view?
(b) Ask your parents, family members, or guardians what the
concept of stewardship means to them. Is stewardship
a useful idea as regards their attitude toward reducing
greenhouse gas emissions? A C
10. In your opinion, would it solve the problem of Canadian and
5. Describe how reducing greenhouse gas emissions could
U.S. emissions if everyone bought enough carbon offset credits
improve your standard of living. A
to offset their emissions? Explain why or why not. T/I A
6. (a) How does tree planting reduce the impact of climate
11. Explain the meaning of the phrase, “responsible stewardship
change?
of Earth.” K/U
(b) What trees are native to the area where you live? How
12. What is the biggest reason for you, personally, to take action
much would it cost to plant a young native tree around
against climate change? A
your house? K/U T/I
7. (a) Write a few sentences describing what carbon offset
credits are and why we should use them.
(b) What are two concerns with carbon offset credits? K/U A

Taking Action on Climate SKILLS MENU

Change Now or Later? Researching
Identifying
Decision
Communicating
Alternatives Evaluating
In 2006, the Conservative government proposed a Analyzing the Issue
new Clean Air Act for Canada. The act was presented
as a positive step toward reducing greenhouse gas
• An economist points out that there are great
emissions. Some people argued, however, that the
economic benefits to promoting energy
act was not strong enough. They pointed out that
conservation.
following the act meant that Canada would not meet
the Kyoto Protocol emission limits. Canada’s Clean • An oil executive says he is willing to fund energy-
Air Act is being revised to address these concerns. saving technologies only after we wait a few more
The key question at stake is: How quickly should years to make sure that climate change is as bad
Canada act to reduce the impacts of climate change? as some people claim.
• An environmental activist says that we are taking
The Issue too little action, too late. Climate change is
The Canadian government, provincial legislatures, already harming people and ecosystems around
and city governments have taken some steps toward the world. We are being very irresponsible in
reducing greenhouse gas emissions. Nevertheless, delaying action.
Canada’s emissions continue to increase. Scientists
and some concerned citizens believe that we are
moving too slowly; others believe we should proceed
cautiously. In this activity, you will take the role of a
stakeholder at a conference on climate change. The
Canadian government has set up the conference to
discuss how to respond to climate change. Several
stakeholders have been asked to present their views.
Roles
• A climate scientist points out that most scientists
agree that climate change is a result of human
activities. She reminds the conference that
humans must reduce their emissions by more
than is being done now to save us from disastrous
impacts (Figure 1).
• A politician argues that taking quick action to
reduce emissions will harm the Canadian economy.
The government should move more carefully,
making sure that our economy remains stable.
• A scientist funded by an oil company suggests that
since we are not certain about all the causes and
impacts of climate change, it makes no sense to take
action. He wants the government to fund studies
on causes and impacts rather than pay for new Figure 1 The melting of Arctic ice is a dramatic impact of
technologies and incentives to reduce emissions. climate change.

SKILLS HANDBOOK
• A political scientist examined 900 scientifi c Gather Information 4.C.2.
papers on climate change. She found that all 1. As a group, choose a stakeholder whom you
agreed with the IPCC consensus that climate will represent. Using a variety of resources, find
change is happening and is caused by humans. information that supports the perspective of
She points out that skeptics do not usually your stakeholder.
publish papers in scientific journals. Instead, they
present their views on the Internet and to the
media (Figure 2). SKILLS HANDBOOK
Identify Solutions 4.C.4., 4.C.5.
Consider the following questions as you prepare to

defend your position.
• Why should the government follow your
suggestions?
• What evidence do you have to support your
position?
• Are there ways to reduce emissions without
harming businesses and industries?
• Will reducing emissions save money or cost
money overall?
Figure 2 The political scientist explains the value of • Does the stakeholder have a personal bias that
peer-reviewed research. is affecting his or her judgment? How might this
bias be addressed in a different way?
• Th e owner of a manufacturing plant argues that • Can a general agreement be reached that is
laws restricting her company’s actions will harm acceptable to all stakeholders? Why or why not?
her business. She is willing to voluntarily reduce
• Should all stakeholders have equal say, or should
some of her emissions but objects to laws that
the opinion of some be considered more weighty
force her to do so.
than the opinion of others, since they may have a
• An industrial designer explains how reducing better understanding of the situation?
greenhouse gas emissions can benefit many
industries. Canada could become a leader in Make a Decision
SKILLS HANDBOOK
4.C.6.
green technology. We could export our expertise
Aft er the presentations have been made and the
around the world.
questions have been answered, discuss in your group
• A citizen is concerned that not enough is being whether or not your position has changed.
done by government and industry to reduce Decide on the fi nal position of your stakeholder.
greenhouse gas emissions. He wonders if the
actions he is taking to reduce his personal Communicate
SKILLS HANDBOOK
4.C.7.
emissions are having any effect.
Using your position, prepare a list of recommendations
to the government. Make sure that your
Goal recommendations are supported by facts and research.
To debate the statement: The Canadian government Write up your recommendations as a formal
should take immediate and extreme action to reduce letter to the minister of the environment.
emissions of greenhouse gases and limit the impacts Alternatively, you could present your information
of climate change. as a news report, a television or newspaper
advertisement, or a convincing work of art. T/I C A

CHAPTER
LOOKING BACK
10
The impacts of climate Impacts of climate change Climate change in Ontario

change will affect our will be felt most in the Arctic. is expected to bring warmer
environment and society. winters and hotter summers.
• The climate is changing more
• The Intergovernmental Panel rapidly in the Arctic than anywhere • Ontario’s ecology and economy will be
on Climate Change (IPCC) has else. (10.2) impacted by climate change. (10.3)
summarized the latest scientific • Climate change in the Arctic will • Summer days will get hotter and
research on climate change. (10.2) have repercussions worldwide. more humid, affecting people’s
• Impacts of climate change are (10.2) health and increasing the demand
affecting people’s health, where for air conditioning. (10.3)
they can live, and what crops they • Many plant and animal species
can grow. (10.2) native to southern Ontario will move
northward. New species will move
up into Ontario from the south.
(10.3)
Current initiatives will not Greenhouse gas emissions Switching to clean energy
prevent serious negative must be reduced by 80 % sources is essential to
effects from climate change. by 2050 to avoid the most reduce greenhouse gas
serious impacts. emissions.
• All levels of government should
consider how to adapt to inevitable • Scientists develop climate scenarios • Clean energy sources produce little
climate change, as well as how for different amounts of greenhouse or no greenhouse gases. (10.1)
to mitigate more severe impacts. gases. (10.1) • Examples of clean energy sources
(10.4) • Climate models make projections are wind power, geothermal energy,
• Governments, business, and about how Earth’s climate would solar power, hydroelectricity,
industry have roles to play in change under these scenarios. biomass, and nuclear power. (10.1)
reducing climate change. (10.4) (10.1) • Individuals can and should take
• To limit increases in global action to reduce climate change.
temperature to 2 °C, we must (10.5)
limit atmospheric greenhouse gas
concentrations to 450 ppm. (10.4)

THINK NOW? clean energy source (p. 407)
climate projection (p. 408)
You thought about the following statements at the beginning of impacts of climate change
the chapter. You may have encountered these ideas at school, (p. 412)
at home, or in the world around you. Consider them again and Intergovernmental Panel on
Climate Change (IPCC)
decide whether you agree or disagree with each one. (p. 412)
mitigation (p. 423)
Kyoto Protocol (p. 423)
1 We can stop climate change

from happening if we reduce our
4 The best way to decrease the impact
of human activity on climate is to
consumption of fossil fuels. switch to clean energy sources.
2 Scientists are always objective and

5 Canadians’ use of fossil fuels is BIG Ideas
unbiased in their data collection, wasteful.
analyses, and conclusions. Agree/disagree? ✓ Earth’s climate is dynamic
Agree/disagree? and is the result of
processes.
and human factors.
✓ Climate change affects
3 Since the impact of climate change
will be most felt in the Arctic,
6 We need to take action on climate
change at individual, local, regional,
ways.
countries situated near the Equator and international levels. ✓ People have the
do not need to be concerned.” Agree/disagree? responsibility to assess
Agree/disagree? their impact on climate
effective courses of
How have your answers changed since then? action to reduce this
What new understanding do you have? impact.

CHAPTER
REVIEW
10
What Do You Remember? Solve a Problem!

1. Describe four possible global impacts of climate 10. (a) List three things you do or participate in that
change. (10.2) K/U result in greenhouse gas emissions.
(b) For each of the three things you listed,
2. List three reasons why it is important to take action suggest two alternatives that would result in
to address the issue of climate change. (10.4) K/U
lower greenhouse gas emissions.
3. About how much of Ontario’s greenhouse gas (c) Assess how likely it is that you will act on
emissions comes from individuals’ activities? (10.5) K/U
these six suggestions. Write a paragraph
4. Give four possible impacts of climate change on explaining why you probably will, or
Ontario. (10.3) K/U probably will not, carry out your own
suggestions. (10.5) C A
What Do You Understand? 11. The issue of sea level rise is attracting a great deal
5. It is diffi
cult for climate models to predict exactly of media attention. Why do you think sea level
how Earth’s climate will change over the next century. rise is such an important issue? (10.2) A
Explain this diffi culty in terms of

12. If a world government required everyone to reduce
(a) the complexity of the climate system. their consumption of fossil fuels by 80 % over the
(b) human choices. (10.1) K/U A
next 10 years, what negative eff ects might this have
6. Specify a possible impact of climate change for on the following sectors? (10.4, 10.6) A
each of the following parts of the world. (10.2) K/U

(a) the economy of oil-producing nations such
(a) Europe as Canada
(b) Asia (b) global transportation
(c) Australia and New Zealand (c) food production and distribution
(d) Africa (d) tourism
(e) Latin America
(f) North America Create and Evaluate!
(g) Arctic, Greenland, Antarctica
13. Why do you think the world is more concerned
7. In this chapter, you learned about several
about climate change in the Arctic than in the
possible impacts of climate change on Ontario.
Antarctic? Suggest several reasons. (10.2) K/U
Which impact do you think will affect you
personally the most? Explain why. (10.3) C A 14. Evaluate at least two positive and two negative
8. Climate projections are based on complex impacts that Canada might experience due to
computer model simulations. These simulations climate change. (10.2) K/U A
consider scenarios of future changes in factors 15. Anticipate how a changing climate might aff ect your
that affect human production of greenhouse gases. daily life. In a blog, a short magazine article, or a
(a) What factors are included in the future video diary, describe a day in your new life. Include
scenarios? at least four examples of changes. (10.3) C A
(b) What factors do the models consider? (10.1)

K/U A
16. Brainstorm a list of actions that your school
could take to reduce greenhouse gas emissions.
9. Th
e cost of switching from fossil fuels would Prioritize the actions and explain your priorities.
be high, but the cost of doing nothing might be Write a summary explaining why it is important
even higher. Thus, people talk about a balanced that these actions be taken. Present your
approach. Name several components of a proposal to the student council and/or the
balanced approach. (10.4–10.6) C A
principal. (10.5) T/I C A

17. The Canadian government is making important 21. Do you have family relatives, friends, or
decisions about climate change that will affect neighbours who work in any of the following
your life. If the government asked you for your sectors of our economy: transportation,
opinion on the top three priorities it should focus producing energy, industries, building and
on, what would you say, and why? (10.4) C A contracting, agriculture, waste management, and
forests? If so, notice the recommendations made
18. “A change in climate would aff ect plants and
for that sector in Section 10.4. Contact your
animals but would not affect our economy.”
relative or friend and ask them to share
Evaluate this statement. Explain why you agree or
any initiatives they know of in their workplace.
disagree with the statement (Figure 1). (10.2) C A
Take notes to share with your class. (10.4) C A
Reflect On Your Learning

22. Reread Section 10.2 on global impacts. What
was your initial response after reading the list
of possible effects of global warming on the
environment? How do you think your emotions
might affect your critical thinking about the
Figure 1 issue of climate change?
19. Find out what students in your school think 23. Which impacts of climate change had you heard
about the issue of climate change. T/I C
about before starting this chapter? Which impacts
(a) Develop a questionnaire with at least fi ve came as a surprise to you?
opinion-based questions on the topic of
climate change. For example, you might ask
Web Connections
whether students know what climate change
means and/or whether they agree that 24. Research what the government of Ontario is
climate change is caused by human activities. doing to reduce climate change. (10.4) T/I C
You may want to write your questions so (a) Make a list of three initiatives of the
the answers can be scaled from 1 (strongly government of Ontario in this area.
disagree) to 5 (strongly agree). (b) How does the government of Ontario assess
(b) Decide how you will survey a good sample its progress on these initiatives?
of your school. For example, will you include (c) Decide on your personal assessment of each
staff members? Will you include students of the three areas listed in (a). Which do
from different grades? you think is likely to be the most successful?
(c) Carry out the survey. The least successful? Why?
(d) Compile and analyze your data. What trends
25. Suggest a cost-effi
cient way to build a house on
do you observe? Use a chart and/or graph to
permafrost so that it will not be affected by any
display your data.
permafrost thaw that might occur unexpectedly.
20. (a) What types of composting and recycling Conduct research and write a short paragraph
programs are available in your community? with some ideas and a design. T/I C
(b) What proportion of locally generated

garbage do they divert from landfill sites?
(c) How do these programs reduce climate
change? (10.5) T/I K/U


CHAPTER
SELF-QUIZ
10
For each question, select the best answer from the four 6. Which of the following is likely to be a positive
alternatives. effect of rising global temperatures? (10.2) K/U
1. What is one reason that explains why scientists (a) fewer crop pests
have trouble making exact projections about the (b) higher lake levels
rate of climate change? (10.3) K/U (c) longer growing season
(d) less spread of tropical diseases
(a) It is difficult to determine the relative
amounts of atmospheric gases.
Indicate whether each of the statements is true or false. If
(b) It is difficult to measure how the energy you think the statement is false, rewrite it to make it true.
radiated by the Sun varies over time.
(c) It is difficult to predict how quickly people 7. If nations drastically reduce greenhouse gas
will switch from fossil fuels to other energy emissions, global temperatures will immediately
sources. stop rising. (10.4) K/U
(d) It is difficult to calculate how much carbon 8. The rate of climate change can be reduced by
dioxide is produced by the burning of fossil relying less on power plants that burn fossil fuels
fuels. and more on nuclear power plants. (10.1) K/U
2. Which of the following is most likely to be a direct

Copy each of the following statements into your notebook.
result of rising global temperatures? (10.2) K/U
Fill in the blanks with a word or phrase that correctly
(a) more sea ice (c) more freshwater completes the sentence.
(b) more forest fires (d) more biodiversity
9. Th
e ___________ has summarized the latest
3. Which of the following projections best describes research on climate change. (10.2) K/U
how climate change may affect precipitation?

(10.2) K/U
10. Carbon dioxide and methane will be released
into the atmosphere by melting ___________
(a) Climate change will cause the patterns of
in the Arctic. (10.2) K/U
precipitation to vary.
(b) Climate change will increase precipitation 11. To make climate ___________, scientists
everywhere. develop ___________ which specify the amount
(c) Climate change will decrease precipitation of greenhouse gases produced. (10.1) K/U
everywhere.
(d) Climate change will increase snowfall and Match each effect of climate change on the left with the
region most likely to be affected on the right.
decrease rainfall.
12. (a) forest fires (i) Canada
4. Which of these has been proposed as a way (b) species loss (ii) Pacific islands
to absorb excess carbon dioxide from the (c) sea level rise (iii) northern Africa
(d) expanding deserts (iv) Amazon rainforest
(a) fish farms (c) cattle herds (e) increasing storm (v) United States Gulf
(b) large reservoirs (d) reforestation intensity Coast (10.2) K/U
5. Approximately what fraction of Ontario’s

greenhouse gas emissions are caused by the Write a short answer to each of these questions.
activities of individuals? (10.5) K/U 13. Describe two ways in which planting grass on
(a) 10 % (c) 75 % a roof can reduce greenhouse gases. (10.5) K/U
(b) 30 % (d) 85 % 14. Describe the relationship between global

population and climate change. (10.1) K/U

15. Describe a series of global events that connect 20. Explain how the planting of trees can reduce the
fossil-fuel-driven transportation activities to impact of climate change. Be sure to include the
the rise of sea level that could flood low-lying cause-and-effect steps between the act of planting
islands and coastal areas. (10.2) T/I trees and the effect on climate. (10.5)
K/U A
16. Most scientists agree that humans must rapidly 21. Figure 1 shows glaciers on the sides of
reduce their dependence on fossil fuels and mountains in the Canadian Rockies. (10.2) A
convert to energy sources that do not emit

greenhouse gases. Some people think all nations
should cut back emissions by the same percentage.
However, given that switching to alternative
energy sources will be expensive, other people
think that developing nations should not have to
change their energy usage as much as the more
industrialized nations. Write a short paragraph
supporting one of these viewpoints. (10.4) K/U C
17. The warming of Canada’s far north and the Arctic

Ocean may lead to the following changes: Figure 1
• less sea ice
(a) Describe how climate change is likely to
• habitat loss for some species
change the appearance of these glaciers.
• rising sea level
(b) Describe one global effect produced by the
• melting permafrost
melting of these glaciers.
• growth of trees farther north
• more open water for shipping 22. The area of the Arctic Ocean covered by sea
ice is decreasing at an accelerating rate because
• lowering of heating costs
open water absorbs more solar energy than ice
Write a short paragraph explaining whether you does. Imagine you are a climatologist beginning
think these changes will be an overall benefit or to create a computer model that will predict
problem for Canada. (10.2) T/I
changes in Arctic sea ice. Describe two physical
18. Imagine you are planning a survey of local properties you would need to know in order to
businesses that advertise themselves as “green.” begin calculations for your model. (10.1) T/I
Make a list of three questions you would ask the

23. Identify two ways in which you add to
business owners to help you evaluate just how
atmospheric carbon dioxide or other greenhouse
green their businesses are. (10.4, 10.5) C
gases while at home. Explain how each of these
19. A certain species of migratory songbird that once activities leads to the release of greenhouse gases.
spent its summers in southern Ontario has not In each case, explain how you could reduce the
been seen there for several years. (10.3) T/I
amount of greenhouse gas emissions. (10.5) A
(a) State a hypothesis that could explain

24. Describe three ways that people can change their
the birds’ disappearance based on your
shopping habits and dietary choices to reduce
understanding of climate change.
greenhouse gas emissions. In each case, explain
(b) How would you go about testing this
how the change reduces emissions. (10.5) A
hypothesis?
25. Describe the role of the Intergovernmental Panel
on Climate Change (IPCC). (10.1) K/U

UNIT
LOOKING BACK
D
UNIT D
Climate Change


Earth’s climate We have evidence The impacts of
system is powered that our climate is climate change
by the Sun. changing. will affect our
Earth’s climate Human activities environment
system includes have increased and society.
the atmosphere, atmospheric levels of Impacts of climate
the hydrosphere, greenhouse gases. change will be felt
the lithosphere, and The increase in the most in the
living things. greenhouse gases Arctic.
The greenhouse is causing the Climate change in
effect keeps Earth anthropogenic Ontario is expected
warm by trapping (human-caused) to bring warmer
thermal energy Average Global Temperature
greenhouse effect. winters and hotter
radiated by Earth. 0.6
The anthropogenic summers.

0.4
0.2
Thermal energy is 0.0
–0.2
greenhouse effect Current initiatives
transferred within –0.4
1880 1910 1940

Year
1970 2000 is the main cause will not prevent
Earth’s climate of today’s climate serious negative
Annual mean
system through air change. effects from climate

and ocean currents. The largest sources change.
Earth’s climate of greenhouse gases Greenhouse gas
experiences long- in Canada are the emissions must be
term and short-term production and reduced by 80 %
changes. burning of fossil by 2050 to avoid
Scientists use fuels. the most serious
natural ice cores, Global Average Temperatures
Scientists use climate impacts.
Simulation 1: Expected
temperature range if only
sediment layers, models to figure out Switching to clean

1.0 natural changes are occurring
0.5 Simulation 2: Expected

temperature range if human
activity is influencing climate
0.0
Actual temperatures observed
fossils, and tree how different factors energy sources is

1900 1950 2000
Year
rings to study past affect our climate. essential to reduce

climates. GHG emissions.

MAKE A SUMMARY
Imagine a doctor’s waiting room, with Earth waiting its turn. Here is how a doctor–patient conversation might go:
[DOCTOR] So, I hear you’re not feeling well. Can you describe 1. List the evidence for climate change contained in the
your symptoms for me? dialogue between Earth and the doctor. K/U
[EARTH] I just don’t feel right. My sea level has been rising 2. Write some more dialogue. (For example, have any symptoms
for at least a hundred years—and it’s been rising been missed? What is causing the rise in temperature? Why
faster in the last few years. As you can imagine, I’ve is this cause happening? What can be done about Earth’s
had quite a lot of flooding. More of my ice has been problem? What is already being done?) T/I C
melting than usual. Do you think it’s connected? 3. Present your completed dialogue in the form of a cartoon, a
[DOCTOR] Very likely. Do you have any swelling in your oceans? dramatic presentation, or an FAQ on a web page. C
Are you feeling any thermal expansion?
[EARTH] Yes, I have noticed that my oceans seem to be
expanding.
[DOCTOR] Hmm, yes. Ice melting, thermal expansion—that
would explain the sea level rise.
[EARTH] Speaking of oceans, I’ve been having a lot of trouble
with hurricanes. I always have hurricanes, of course,
but they seem to be getting worse.
[DOCTOR] Warmer ocean waters can increase the strength of
hurricanes. Let me examine you. I see a patch of
desert forming here. Is that new?
[EARTH] Yes, it is.
[DOCTOR] It says here in your medical history that your seasons
have been changing lately. What else? Plants and
animals migrating toward the poles—I think I know
what’s happening here. Here’s a thermometer. I’m
just going to take your temperature.
[DOCTOR EXAMINES THERMOMETER]
Just as I thought. Your temperature is rising.
© 2007. Dan Piraro. King Features Syndicate
CAREER LINKS
List the careers mentioned in this unit. Choose two of the careers that interest you
or choose two other careers that relate to climate change. For each of these careers,
research the following information:
• educational requirements (secondary and • potential employers
post-secondary) • salary
• skill/personality/aptitude requirements • duties/responsibilities
Use the information you have assembled to create a brochure. Your brochure should
compare your two chosen careers and explain how they connect to climate change.

UNIT
UNIT TASK
D
Global Climate Change SKILLS MENU
The Issue Researching
Identifying
Decision
Communicating
The Intergovernmental Panel on Climate Change Alternatives Evaluating
Analyzing the Issue
(IPCC) is preparing an update to its previous
reports on global climate change. The update will
include recommendations for actions. You are • Peru
volunteering your expertise to contribute to these • Bangladesh
recommendations. The panel’s findings will be • Southeastern coast of Australia
presented at an international conference. • Uganda (Figure 2)
• a diff erent location (with the permission of
Goal your teacher)
To collect climate information about a specific region,
to use the information collected to identify any
impacts of climate change, and to suggest specific
steps toward mitigation.
SKILLS HANDBOOK
Gather Information 4.A., 4.B., 6.A.
1. Choose a location such as one of the following

locations to research:
• Churchill, Manitoba, Canada (Figure 1)
Figure 2 Uganda
2. Research the climate of the location you
have chosen. Collect data (both current and,
if possible, from about 50 years ago) on the
following:
• average monthly and yearly temperatures
• average monthly and yearly precipitation
• an estimate of how much precipitation falls as
snow versus rain
• severe weather patterns (e.g., storms,
hurricanes, yearly monsoons, seasonal floods,
Figure 1 Churchhill, Manitoba droughts, heat waves)
• Vancouver, British Columbia, Canada • amounts of permanent ice or frozen soil
(glaciers, permafrost)
• Whitehorse, Yukon, Canada
• extent and duration of ice cover on lakes in
• Baffi
n Island, Nunavut, Canada
winter
• Tuvalu
3. Analyze and present your data using tables and
• France graphs. Note any recent changes in climate that
• United Kingdom you observe.

4. Review the information about global climate • What steps have already been taken by local
change in this unit. What impacts of climate government, businesses, and individuals to adapt
change do you expect to occur in this region to climate change?
over the next 100 years? Make a list of projected • How can the local government, businesses, and
changes for the region. individuals adapt to coming changes in climate?
5. Research impacts of climate change in the
Make a Decision
SKILLS HANDBOOK
region. For example, look for changes in any of 4.C.5.
the following factors. What would be the most practical solution(s) for the
• changes in river fl ow, ice cover, fl ooding, people in this region, given what you have learned
and/or rainfall about the region?
• changes to local ecosystems and/or species
Communicate
SKILLS HANDBOOK
• changes in severe weather patterns 4.C.6., 4.C.7.

(e.g., hurricanes, monsoons) Present your research at an international conference
• unusual heat waves or droughts (i.e., with your classmates). In your presentation,
• changes in agricultural land include the following:
• changes in the occurrence of insect-borne • a comparison of the climate 50 years ago and
diseases (such as malaria, dengue fever, West today
Nile virus, Lyme disease) • climate-related changes that are already occurring
6. Research social and economic data for the • a projection of expected climate-related impacts
region. For example, look for the following in the region over the next 100 years
factors: • the most appropriate steps for mitigation and
• relative wealth or poverty of people in the adaptation for local government, businesses, and
region individuals
• traditional or cultural activities in the region Your presentation could be an in-person speech, a
video, a poster presentation, or a written submission.
• access to scientifi c information and/or
technologies in the region ASSESSMENT CHECKLIST
7. Compare your list of projected impacts from Your completed Performance Task will be
Step 4 with the impacts you identified from your evaluated according to how well you are able to
research in Step 5. Are any of your projected
impacts already occurring?
✔ Thoroughly research and analyze the data.
8. Write a one-page summary of your report of
observations from Steps 5 to 7. Thinking/Inquiry
✔ Plan and develop a clear search strategy for climate data.
✔ Record the data in an organized fashion.
Identify Solutions
SKILLS HANDBOOK
4.C.3., 4.C.4. ✔ Compare projected impacts with actual impacts.
Brainstorm a list of practical steps that people in the ✔ Identify potential solutions.
region can take to mitigate or adapt to climate-related
Communication
changes. Consider these questions when generating ✔ Clearly present data in a table or graph.
your suggestions for the region: ✔ Prepare and present your current and projected climate-
• What major aspects of life in that region would related impacts in an organized manner.
be affected by climate change? Application
• How can people in the region reduce their ✔ Make recommendations on how to limit and prepare for
emissions of greenhouse gases and/or reduce local and global climate change.
deforestation in the region? ✔ Demonstrate an understanding of natural and human
factors that influence climate in this region.
NEL Unit D Task 445

UNIT
REVIEW
D
What Do You Remember? 6. Scientists use proxy records to help them study
past climates. Proxy records include
alternatives. (a) tree rings.
(b) atmospheric weather records.
1. What is the difference between weather and
(c) oceanic temperature measurements.
climate? (8.1) K/U
(d) satellite observations of polar ice cover. (8.11) K/U
(a) Weather refers to wind and precipitation,

whereas climate refers to the temperature of 7. Long-term natural changes in Earth’s climate
a region. over the past 400 000 years have most likely been
(b) Weather happens on a daily basis, whereas caused by
climate is the average of weather over long (a) changes in the total amount of ice and water
periods of time. on Earth.
(c) Weather changes slowly, whereas climate (b) changes in Earth’s orbit and in the angle of
changes quickly. its axis.
(d) Weather happens only over land, whereas (c) a decrease in the number of animals on
climate happens over both the land and the Earth.
ocean. (d) a decrease in the amount of oxygen in Earth’s
atmosphere. (8.9) K/U
2. Which list includes all the key components of
Earth’s climate system? (8.4) K/U 8. Which of the following is NOT evidence of
(a) water, land, and living things current climate change? (9.1) K/U
(b) air, water, ice, and land (a) rising average world temperatures
(c) air, water, ice, and living things (b) rising sea levels
(d) air, water, ice, land, and living things (c) increasing water pollution
(d) decreasing Arctic ice cover
3. The hydrosphere is made up of
(a) all living things and their habitats. 9. What is the most likely cause of current climate
(b) all land on Earth’s surface. change? (9.4) K/U
(c) all frozen water on Earth. (a) melting ice at the poles
(d) all water on Earth. (8.4) K/U (b) changes in solar radiation
(c) volcanic eruptions
4. Which of the following mechanisms is NOT
(d) human emissions of greenhouse gases
significant in transferring thermal energy across
Earth’s surface? (8.8) K/U 10. Which of the following actions is mainly
(a) air convection currents your responsibility and NOT that of your
(b) heat conduction through land masses municipality, the province of Ontario, or the
(c) the thermohaline circulation in the ocean government of Canada? (10.5) K/U
(d) the Gulf Stream (a) support international treaties to reduce

carbon dioxide emissions
5. Which gases are the principal contributors to the
(b) collect methane from landfills for use as
natural greenhouse effect? (8.6) K/U
energy
(a) carbon dioxide, methane, water vapour (c) change the power source of electricity-
(b) carbon dioxide, methane, oxygen generating stations away from coal
(c) carbon dioxide, water vapour, oxygen (d) change transportation habits so that we
(d) argon, carbon dioxide, methane walk, bicycle, and use public transit more
frequently

11. Which of the following statements correctly 14. Which statement correctly describes what
explains how greenhouse gases affect Earth’s happens to energy from the Sun once it reaches
temperature? (8.6) K/U
Earth? (8.3) K/U
(a) Greenhouse gases act as a protective layer in (a) Earth’s surface absorbs about half of the total
Earth’s atmosphere by reflecting most of the energy and re-radiates it as infrared energy.
incoming solar radiation. (b) Earth’s atmosphere reflects about half of the
(b) Greenhouse gases keep Earth cool by energy back to space.
removing moisture from the atmosphere (c) Earth’s forests absorb about half of the total
that would otherwise increase Earth’s energy, converting it into chemical energy.
temperature. (d) Earth’s oceans absorb about half of the total
(c) Greenhouse gases absorb infrared radiation energy, causing them to warm up.
emitted by Earth’s surface and emit about
half of this radiation back toward Earth’s Indicate whether each of the statements is TRUE or FALSE. If
surface. you think the statement is false, rewrite it to make it true.
(d) Greenhouse gases absorb ultraviolet 15. A location’s climate is affected by factors such as
radiation from the Sun, convert it to infrared distance from the equator, height above sea level,
radiation, and emit almost all of this and nearby bodies of water. (8.3, 8.4) K/U
radiation back into space.

16. Ozone is harmful to life on Earth when it is high
12. Which of the following is an example of thermal
up in the stratosphere and helpful when it is at
expansion? (9.1, 9.3) K/U
ground level, in the troposphere. (8.4) K/U
(a) Water increases in volume as its temperature

increases. 17. Earth absorbs much more energy from the Sun
(b) More salt dissolves in sea water as the water than it releases. (8.3) K/U
travels to the poles.

18. Gases in Earth’s atmosphere trap infrared
(c) Human activity has increased the amount of
radiation from Earth and thus keep our climate
greenhouse gases in the atmosphere.
warmer than it would otherwise be. (8.3) K/U
(d) As global temperatures increase, organisms

that carry disease may move farther north. 19. Earth’s climate changes naturally over very long
13. Which of the following correctly describes an El periods of time. (8.9) K/U
Niño event? (8.9) K/U

20. Increases in global temperatures are caused by
(a) Over time, the movement of Earth’s landmass damage to the ozone layer. (8.4) K/U
produced today’s continents from one large

21. Deforestation is a problem because cutting
supercontinent.
down forests releases carbon dioxide into the
(b) The vibration of atoms in certain molecules
atmosphere and prevents the absorption of
allows these molecules to absorb different
carbon dioxide. (9.4) K/U
types of energy from the Sun.
(c) The prevailing winds in the Pacific Ocean 22. CFCs are greenhouse gases. (9.4) K/U
temporarily switch direction and push warm

water east, toward South America. 23. Most greenhouse gases in Canada are produced
(d) Clouds form at low altitudes where they can by household electricity use. (9.5) K/U
trap thermal energy near Earth’s surface, 24. The leeward side of a mountain range receives
increasing Earth’s temperature. less precipitation than the windward side of the
mountain range. (8.4) K/U
NEL Unit D Review 447

25. Heating and cooling our homes is the main 38. Describe the eff ect of ocean currents on nearby
source of greenhouse gas emissions by land. (8.8)
K/U
individuals. (10.5) K/U
3 9. Describe the main natural and human sources

26. Climate change is happening more rapidly near of each of the following greenhouse gases.
the equator than anywhere else. (10.2) K/U
(8.6, 9.4)
K/U
(a) methane
Copy each of the following statements into your notebook. Fill (b) nitrous oxide
in the blanks with a word or phrase that correctly completes 40. Our climate has changed over the last 50 years.
the sentence.
Name two things about the climate in your
27. Earth’s climate system is made up of the Sun and region that would be different from today if you
the , , lithosphere, and were growing up in 1960. (10.3) K/U
. (8.4) K/U
41. Name two things scientists can learn from

28. Earth absorbs radiation from the Sun in several examining and testing ice cores. (8.11) K/U
forms, , , , but
re-radiates it back out to space primarily in the 42. Explain how ozone is helpful when it is present
form of . (8.3) K/U
in the stratosphere, while it is harmful when it is
present in the troposphere. (8.4) K/U
29. Th
e rise in sea level is probably being caused by
two main factors at the present time: What Do You Understand?
and . (9.1) K/U
43. The climate impacts our everyday lives.

30. The greenhouse gas called is mainly (8.1, 8.2, 10.3) K/U A
produced by burning fossil fuels. (9.4) K/U

(a) Describe the climate in the region where you
31. The oceans play an important role in live.
balancing Earth’s climate because they (b) Describe three specifi c impacts of climate
transfer . (8.8) K/U change that you might observe over the next
hundred years in the region where you live.
32. Because of the eff ect, an ice-covered
44. Examine Figure 1. (8.6, 9.4) K/U
Earth would reflect more of the Sun’s energy
than would an Earth with no ice. (8.10) K/U
33. A _________ exists when a cause creates an

effect that influences the original cause. (8.10) K/U
34. ____________ is the careful management of

something you do not own. (10.5) K/U
35. Th
e energy __________ by Earth is equal to the
energy radiated by Earth. (8.3) K/U
Figure 1
(a) Explain what is happening in Figure 1.
36. Describe the two main ways in which thermal
energy is transferred within the climate (b) Discuss why the eff ect shown in the diagram
system. (8.8) K/U is important for life on Earth.
37. Distinguish between the natural greenhouse

effect and the anthropogenic greenhouse effect.
(8.6, 9.4)K/U

45 . Predict what would happen to temperatures on 48. Climate change is occurring as a result of human
Earth if Earth absorbed energy from the Sun but activities. (9.6, 10.1, 10.2) K/U
did not emit all of it. (8.3) T/I

(a) Explain why most scientists think that climate
46. Carbon dioxide is an important natural and change today is caused by human activities.
anthropogenic greenhouse gas. (8.6, 9.4, 9.5) K/U (b) Explain why a few scientists think that most
climate change today is not primarily due to
(a) Give one example of a natural source of
human activity.
carbon dioxide.
(b) Give two examples of human sources of 49. Draw a concept map that shows the methods
carbon dioxide. that scientists use to study past climate.
(c) Give one example of a carbon sink and Include the following terms: proxy records,
explain how it works. precipitation, temperature, ice, thermometer,
written records. (8.11)K/U C
47. Look at the two photographs of the same

glacier, in the present (Figure 2(a)) and 1939 50. Predict how climate change might impact each
(Figure 2(b)) (9.1, 10.2) K/U T/I C of the following continents. Include at least two
impacts for each. (10.2) T/I
(a) North America

(b) Africa
(c) Australia
51. (a) Describe four negative impacts of climate
change that are expected for Ontario.
(b) Describe two positive impacts of climate
change that are expected for Ontario. (10.3) A
52. How does ice influence Earth’s climate?

(8.10, 10.2) K/U
(a)
53. Describe how each of the following natural
cycles plays a part in Earth’s climate system.
(8.4, 8.6, 9.4)
K/U C
(a) the water cycle

(b) the carbon cycle
54. A friend tells you that we could stop climate
change entirely if we immediately reduce
greenhouse gas emissions. Use what you have
learned in this unit to write a response to this
statement. (10.4–10.6) T/I
55. Predict what might happen in each of the

(b)
following situations. (9.4, 10.2–10.5) T/I
(a) A non-native plant species migrates into

Figure 2
southern Canada.
(a) How has the glacier in Figure 2 changed? (b) More Canadian farmers turn to cattle
(b) Explain why this change is happening. Include ranching.
diagrams to illustrate your explanation. (c) The Canadian government offers tax
(c) List the two main human activities that are incentives for insulation and energy
causing Earth’s climate to change. efficiency in new buildings.
(d) All new buildings were constructed with
green roofs.

56. Copy and complete Table 1 in your notebook. 61. People are cutting down rainforests to clear land
(10.2) K/U
for growing crops. (9.4) T/I
Table 1 Potential Costs and Benefits of Higher Temperatures (a) Explain one reason why people would rather
in the Arctic grow crops on their land than allow trees to
grow on it.
Potential costs Potential benefits
(b) How do you think you could convince people
1. 1. not to cut down the trees and allow the
2. 2. rainforest to remain?
3. 3.
Create and Evaluate
Solve a Problem 62. A climate scientist creates a computer model of
57. Copy Table 2 into your notebook. List three Earth’s climate system. First, she programs the
actions under each heading. (10.4, 10.5) K/U A model to show global temperatures over the past
100 years in a world without humans. Next, she
Table 2 Acting to Reduce Climate Change
programs the model to show global temperatures
Could be done over the past 100 years in a world with humans.
Already being Could be done by you and your
done in Canada in Canada family, school,
Predict and compare the results from each
or community program. (9.6) T/I A
63. (a) Compare the impacts of climate change that

are currently happening (Section 9.1) with
the impacts that are expected to happen
(Section 10.2).
58. Your local government wants to reduce (b) Would you agree that the most severe impacts
your community’s emissions of greenhouse of climate change have already happened?
gases. (9.5, 10.4) K/U T/I C
Explain why or why not. (9.1, 10.2) K/U
(a) Identify three major sources of greenhouse 64. In a school debate, one student argues that
gases in your community. Canada’s forests are reducing the amount of
(b) Come up with a reasonable plan to reduce greenhouse gases Canada emits. The other
the amount of greenhouse gases from each student argues that Canada’s forests are
source. increasing the amount of greenhouse gases
(c) Create a brochure or visual presentation emitted by Canada. Discuss how each student
outlining your ideas. Display your could be correct. (9.5) K/U
presentation at school, at a local community

centre, or in a local government building. 65. A climate change skeptic argues that scientists
59. What colour clothing would you wear to stay are not completely sure how Earth’s climate will
cool on a hot, summer day? Use what you change in the future. He suggests that scientists
know about the albedo eff ect to explain your should carry out more studies before we start
answer. (8.10) K/U A taking action. (10.2) K/U
60. Your family needs to buy the items listed below. (a) Why is it difficult for scientists to accurately
Explain at least two things your family should predict future climate?
consider as they look at each item. (10.5) A (b) What is your opinion? Write a short response
(a) light bulbs to this skeptic.
(b) a refrigerator
(c) a car

66. In Chapter 8, you learned how the climate system 73. In this unit you learned that individuals can have
transfers energy around the world. In Chapter 9, an impact when they reduce their greenhouse gas
you learned that increases in greenhouse gases are emissions. (10.5)
causing rising temperatures, in other words, an (a) Describe one way you tried to reduce your
increase in thermal energy. Use what you know greenhouse gas emissions before studying this unit.
about the way energy is transferred to hypothesize (b) Describe one new way you can reduce your
how rising temperatures may affect air and ocean greenhouse gas emissions based on what you
currents. (8.8, 9.4) K/U T/I
learned while studying this unit.
67. You want to demonstrate convection currents in
water to a class. Describe how you would design Web Connections
this demonstration. (8.8) T/I
74. Many people are concerned that food production

68. Contact your local recycling centre to find out and transportation may be contributing to climate
which materials can be recycled and which ones change. They consider options such as becoming
cannot. Then, create a poster or other graphic that vegetarian, eating only locally grown food, or eating
illustrates what can and cannot be recycled in your organic. Research the risks and benefits of each of
area. (10.5) A C
these choices. Consider which might be the best
option. Communicate your decision, supported by
Reflect On Your Learning arguments, in a skit, a blog entry, a documentary
69. If you had to describe the most important idea in video, or some other creative form. (10.4, 10.5) C A
this unit to a friend, what idea would you choose? 75. Ocean currents around the globe act like a huge
Explain why. conveyor belt, slowly moving thermal energy from
70. When you read a text book, you will fi nd some the equator to the poles (Figure 3). Some scientists
parts more interesting than others. suggest that increases in sea level could disrupt
this conveyor belt. Research what impacts can be
(a) What part of this unit was the most interesting
expected if ocean currents are disrupted and prepare
to you? Explain why.
a brief (one-page) summary report. (8.8) T/I C
(b) What part of this unit was the least interesting

to you? Explain why. heat release
to atmosphere
(c) Find someone in your class who was interested
in the section you did not find interesting.
Ask your classmate to tell you why it was ATLANTIC
OCEAN warm surface
PACIFIC
OCEAN
current
interesting.
INDIAN
71. In this unit, you learned that greenhouse gases are OCEAN cold
saline
probably causing rising global temperatures. (9.4) deep
current
(a) What did you know about greenhouse gases
before studying this unit? heat release
to atmosphere
(b) How has your understanding of greenhouse
Figure 3
gases changed during this unit?
76. Scientists are concerned about changes in climate
72. How has one of your views on climate change at the poles. Research climate change at the Arctic
altered after studying this unit? Give a specific and the Antarctic. (10.2) T/I C
example in your explanation.

(a) Why is change here so significant?
(b) Present your findings as a poster or website.
UR-F07-UCOS10SB.ai

UNIT
SELF-QUIZ
D
1. In which of the following would you expect the sentence.
convection currents to form? (8.8) K/U
8. Grass has a higher albedo than dark-coloured
(a) soil soil. Th
erefore, grass ________ more sunlight
(b) rock than does dark soil. (8.10) K/U
(c) air
9. Geothermal energy and hydroelectric power are
(d) ice
considered clean energy sources because they do
2. Which of the following is a factor in causing not produce ________. (10.1) K/U
short-term variations in climate? (8.9) K/U
(a) continental drift Match each term on the left with the most appropriate
(b) volcanic eruptions description on the right.
(c) the shape of Earth’s orbit
10. (a) climate (i) graphs showing
(d) ozone in the stratosphere
projection temperature and moisture
3. Which of the following is an example of a proxy (b) bioclimate conditions at a specific
record? (8.11) K/U
profile location
(a) data collected from tree rings (c) climate (ii) average of the
(b) a recent photo of a glacier in the Arctic system weather in a region over a
(c) a graph showing rainfall amounts in 1990 (d) climate long period of time
(d) the weather forecast from yesterday’s (iii) global conditions
newspaper produced by the interactions
4. Which of the following is a source of methane between Earth’s air, land,
emissions? (8.6, 9.4) K/U
liquid water, ice, and living
things
(a) nitrogen fertilizers
(iv) reasonable scientific
(b) aerosol spray cans
estimate of a region’s
(c) cattle ranching
future temperature and
(d) photosynthesis in plants
precipitation conditions
(8.2, 8.4, 10.1) K/U
Indicate whether each of the statements is TRUE or FALSE. If

you think the statement is false, rewrite it to make it true. 11. (a) carbon (i) A gas that forms in the
dioxide atmosphere as lakes and
5. Prevailing winds that come from the North Pole
(b) methane rivers evaporate.
will tend to make the regions they pass over
(c) water (ii) A gas that exists naturally in
receive large amounts of precipitation. (8.8) K/U
vapour the stratosphere.

6. Melting icebergs will cause a great rise in sea (d) nitrous (iii) A gas released into the
levels. (9.1) K/U
oxide atmosphere from certain
7. The natural greenhouse effect is necessary for life (e) ozone fertilizers.
to exist on Earth. (8.6) K/U (iv) A gas given off when fossil
fuels are burned.
(v) A gas produced by cattle
during their digestive
process. (9.4) K/U

Write a short answer to each of these questions. 22. This unit suggested several ways to conserve
12. Why would you expect a cloudy, summer night energy and reduce your greenhouse gas
to be warmer than a cloudless, summer night? emissions. Write down at least two other items
(8.8)K/U you could add to these suggestions. Explain why
these items should be included. (10.5) A
13. You decide to keep a record of the high and

low temperatures in your town for the next two 23. Climate affects how we live and what activities
weeks. What kind of research could you do to we can undertake. (8.1) T/I
find how the local temperatures from 50 years (a) Describe at least two ways in which the
ago compare to the data you collect? (8.1) K/U T/I
climate in your region affects the way
14. The Sun radiates energy onto all areas of Earth’s you live.
surface. Explain two reasons why the climate (b) Choose another region of Canada. How
at Earth’s poles is colder than the climate at the would the climate in that region affect the
equator. (8.3, 8.4) K/U two things you described in part (a)?
24. Earth’s surface is made up of more water than
15. Explain how the processes of evaporation and
land. Predict what influence it would have on
condensation move energy from one place to
Earth’s climate if Earth’s surface contained more
another. (8.4, 8.8) K/U
land than water. (8.4, 8.9) T/I
16. Predict how Earth’s average temperature would

25. Do you think that Canada should have agreed to
change if Earth had no atmosphere. Explain your
join the Kyoto Protocol? Write a short argument
prediction. (8.4) T/I
explaining your opinion. (10.4) A C
17. Describe an example of a positive feedback loop

26. This unit introduced many new concepts about
in daily life. (8.10) A
climate change. T/I
18. Explain how the disappearance of glaciers would (a) Which concept in this unit did you find
affect some people in China. (10.2) T/I
difficult to understand? Why?
19. Predict at least two ways in which climate change (b) What further research can you do to help
will impact your life. (10.2, 10.3) T/I you better understand this concept?
20. You are writing an article for your school 27. In this unit, you learned that ozone can be
newspaper about how your community is helpful or harmful to life on Earth, depending on
preparing for the impacts of climate change. To its location in the atmosphere. You also learned
collect information for your article, you have that the greenhouse effect is essential to life on
scheduled an interview with a local official. List Earth, but the anthropogenic greenhouse effect
at least three questions you will ask the official may be harmful. K/U A
during the interview. C (a) Write a general statement describing the

pattern contained in this information.
21. Describe how the shrinking of Arctic ice could
(b) Have you ever observed a similar pattern
affect
anywhere else in real life?
(a) animals such as polar bears and seals that
live there
(b) global climate (10.2) T/I
NEL Unit D Self-Quiz 453

E
UNIT Light and
Geometric Optics
OVERALL
Expectations
evaluate the
effectiveness and social
benefits of technological
devices and procedures
that involve light
investigate the reflection
of light in plane and
curved mirrors and the
refraction of light in
converging lenses
demonstrate an
characteristics and
properties of light related
to reflection in mirrors
and reflection and
refraction in lenses
BiG ideas
Light has characteristics
and properties that can
be manipulated with
mirrors and lenses for a
range of uses.
Society has benefitted
from the development of
a range of optical devices
and technologies.
454 Unit E • Light and Geometric Optics NEL

Focus on STSE
WINDOW ON
THE WORLD
The human eye is the most remarkable of all optical devices. It gathers light and is our
main source of information about the world around us.
Vision Problems
Our eyes allow us to see a faint, distant, twinkling star yet also allow us to read
a book close up. Sometimes our eyes need help in order to see clearly.
1. How do we help the eye when it has vision problems? A
Unfortunately, current medical technology cannot solve all vision problems. Some
people have to learn to cope without using their eyes to see. How do they do this?
2. Write a personal narrative account of how a visually impaired person is able

to negotiate the seeing world. What aids, devices, and skills could they use
to cope with vision loss? Your narrative should emphasize the social equity
and competence of visually impaired persons and how they would like to be
treated by others. T/I C A
Optical Devices
The human eye is not the only optical device that is useful to us. A flat mirror lets
us see objects behind us, a telescope lets us see distant galaxies, and a microscope
allows us to see tiny organisms.
The study of optics allows us to understand how light behaves. This knowledge allows
us not only to learn about the universe around us but also to build devices such as
cameras that are very useful to society.
3. What are some other optical devices that are very useful to humans? A

UNIT
LOOKING AHEAD
E
UNIT E
Light and
Geometric Optics
The Production The Refraction Lenses and

and Reflection of Light Optical Devices
of Light
Mirrors are among the most familiar When light travels through different Lenses can be made of almost any
optical devices. media, besides air, we see some transparent medium, including water.
unexpected images.
UNIT TASK Preview
Building an Optical Device

Optical devices such as eyeglasses, microscopes, cameras, UNIT TASK Bookmark
or projectors are useful instruments in our society. Optical
devices can also be fun. For example, curved amusement The Unit Task is described in detail on page 588. As you
park mirrors that seem to distort your body are used for work through the unit, look for this bookmark and see how
the section relates to the Unit Task.
entertainment.
Your task is to design, construct, test, refine, and then
evaluate an optical device that satisfies a human need or ASSESSMENT
want. You will use the properties of light presented in this unit.
You will be assessed on how well you
You are to explain how your device works and how it helps or
entertains people. • plan and design your device
The device should demonstrate that you considered social, • build, test, and improve your prototype
health, environmental, and economic factors in designing and • explain and demonstrate how your device works and
constructing it. Try to use environmentally friendly materials why it is useful to society
that are durable and economically viable. Does the device
have any potential negative social or health risks? How will
you minimize these?

PREREQUISITES
Concepts Skills
• Light is a form of energy • Drawing lines and measuring • Using laboratory equipment safely
• Light travels in straight lines angles accurately and appropriately
• Drawing neat, clearly labelled • Communicating scientifi c ideas
diagrams appropriately
• Solving an equation with one unknown • Writing lab reports for investigations
1. (a) What is the main source of energy for Earth? 5. Funhouse mirrors are curved mirrors. Describe some of the
(b) What evidence supports this? K/U different shapes your body might have in a funhouse mirror. C
2. (a) What kind of light is shown in Figure 1? 6. (a) What physical shape does a security mirror in a store
have (Figure 3)?
(b) What similarities and differences exist between this kind
of light and the kind of light in your home? K/U A (b) In such a mirror, is your appearance
• larger or smaller?
• upside down or right side up?
• backwards? K/U T/I
Figure 1
3. Hold your hand just above a sheet of paper. T/I
Figure 3
(a) What happens to the shadow as you move your hand
closer to the paper?
7. (a) Describe the appearance of a straw in a glass of water
(b) How does the shadow change as you move your when you look at it from above (Figure 4).
hand farther away from the paper? Why does this
(b) What do you think causes this unusual appearance? T/I
happen?
4. (a) You are wearing a T-shirt with writing on it. How does the
writing appear when you look at the T-shirt in a mirror?
(b) How is the writing on this ambulance (Figure 2) similar to
what you saw looking at your T-shirt in the mirror? K/U
Figure 2 Figure 4

CHAPTER
11 The Production and

Reflection of Light
KEY QUESTION: How do mirrors form images?
Mirrors in structures can create

dramatic visual effects.
458 Chapter 11 • The Production and Reflection of Light NEL

UNIT E
Light and
Geometric Optics

of Light
KEY CONCEPTS
C11-P02-UDOS10SB.
Optical devices benefit Light is produced by Light is an electromagnetic

our society in many ways. natural and artificial wave that travels at high
sources. speed in a straight line.
When light is reflected off Images in flat mirrors are Curved mirrors produce
a flat, shiny surface, the located at the point where a variety of images.
image is equal in size to the backward extensions
the object and the same of reflected rays intersect.
distance from the surface.

ENGAGE IN
SCIENCE
“It was sweeping round swiftly and steadily, this flaming This passage is from H. G. Wells’s The War of the
death, this invisible, inevitable sword of heat. I perceived Worlds. It describes a “heat-ray” that invading Martians
it coming towards me by the flashing bushes it touched, used against helpless humans. Wells’s book was
and was too astounded and stupefied to stir. I heard the published over 100 years ago in 1898. In it, Wells made
crackle of fire in the sand pits and the sudden squeal of the first fictional reference to what we today call the laser.
a horse that was suddenly stilled. Then it was as if an Wells imagined that a laser would be used for
invisible yet intensely heated finger were drawn through destructive purposes. Although this use of a laser does
the heather between me and the Martians, and all along exist today in many Hollywood movies, in reality the laser
a curving line beyond the sand pits the dark ground is a fairly benign invention. After all, the laser is found
smoked and crackled.” in CD and DVD players, pointers used in presentations,
room-measuring devices used by real estate agents, and
scanning devices at the check-out desks of most retail
stores. The bright, intense light of a laser beam is used in
every field, from manufacturing to entertainment.
Think about applications that you use or experience
that make use of a laser. Can you think of other benefi cial
uses of a laser? Why do you think the image of the laser
as a dangerous weapon is persistent even today? Does
mass media always portray science and technology in a
realistic way?

WHAT DO YOU
THINK?
water’s surface
1 This diagram accurately shows light reflecting off the

surface of very still water.
4 This diagram accurately shows how an image appears
in a makeup mirror.
C11-F02-UDOS10SB.ai
Illustrator
laser
2 This diagram accurately shows a laser beam reflecting off

a curved mirror.
5 Microwaves travel at the speed of light.
Agree/disagree?
Agree/disagree?
UDOS10SB
0-17-635528-6
Figure Number C11-F02-UDOS10SB.ai

Company Nesbitt Graphics
Creative
Pass 4th Pass (final)
Approved
A full-length mirror is necessaryNot
in Approved
order for you to see
3 your whole body in reflection.
6 Ain luminous object such as a candle radiates light
all directions.

FOCUS ON
WRITING
Writing a Persuasive Text
One purpose of a persuasive text is to convince an audience to accept an
WRITIng Tip
opinion on the basis of powerful reasons and logical thinking. The following
As you work through the chapter, is an example of a persuasive text written about lighting sources in
Section 11.2. Beside it are the strategies the student used to write the
persuasive text effectively.
Bright Lights of the Future

Most people today believe that the compact fluorescent light (CFL) is
First paragraph introduces preferable to the incandescent light bulb. Many countries have passed
the topic. laws to ban incandescent light bulbs. Unfortunately, the CFL is not the
best alternative. Instead, the best source of artificial lighting is the Clear opinion is
light-emitting diode (LED). stated concisely.
The CFL is 75 % more energy-efficient than the incandescent light bulb. Statistics are used to support
It produces the same amount of light, but uses less electricity and the key point of this paragraph.
First reason to accept the
Figure 1 is
opinion caption
stated clearly.
produces less heat. Recent breakthroughs have led to the development
of LED lighting that is three times more efficient than CFLs. Better energy
efficiency is the first reason that LEDs will be the light source of choice
in the future.
The second reason is lifespan. Incandescent light bulbs have a lifespan

Second reason to accept of approximately 1 500 hours. CFLs are rated at about 10 000 hours.
the opinion is stated clearly. LEDs are estimated to last between 45 000 and 100 000 hours.
The most important reason to support the development of LEDs is

Third reason to accept environmental. Incandescent light bulbs are not good for the environment
the opinion is stated clearly. because of their inefficiency. The major environmental concern with CFLs
is that they contain mercury, a hazardous substance. LEDs, on the
Facts are used to support the
contrary, contain no materials harmful to the environment. key point of this paragraph.
LEDs contain no toxic components and they are more efficient and last
Concluding paragraph explains longer than incandescent light bulbs and CFLs. Therefore, they will
how the ideas are connected eventually become the standard for artificial lighting in the future.
and reinforces the opinion. Signal words show the
relationship between ideas.

What Is Light? 11.1
What would Earth be like without light from the Sun? Sunlight is the
energy that makes life possible on Earth. The Sun is our closest star—about
1.50 × 108 km from Earth. That is nearly 400 times farther than the Moon.
The nuclear reactions that occur within the Sun produce tremendous
amounts of energy (Figure 1). One form this energy takes is light, which
the Sun emits in all directions through the vacuum of outer space.
Earth captures only a tiny fraction of the Sun’s light. That little fraction,
however, provides just enough energy to heat Earth’s surface and allow
photosynthesis to occur, both in the oceans and on land. From plankton
blooms in the ocean to forests on land, plants are the basis of the food
chain for almost all organisms on Earth (Figure 2).
Figure 1 The Sun releases a great
deal of energy as a result of its nuclear
reactions.
To learn more about the different

types of energy produced by the
Sun and how the Sun works,
WRITIng Tip
Use the first paragraph to identify the
topic and state your main idea/opinion
concisely. For example, if you are
writing about plants being the basis of
the food chain, you could begin: “Light
from the Sun enables plants on Earth to
grow. Without plants, humans and other
animals would starve.”
Figure 2 A satellite view of a phytoplankton bloom off the coast of Vancouver Island. Phytoplankton DID YOU KNOW?

are tiny photosynthesizing organisms that live in the oceans. They produce about half of all the
oxygen produced by plants on Earth. The Energy of Light
Scientists call a small packet of light
energy a photon. The term “photon”
For centuries, scientists have tried to understand the nature of light and
was coined by American chemist
its properties. Some of these properties are easily observable. For example, Gilbert Lewis in 1926, and was based
light travels at a very high speed. When you turn on the light switch in on the Greek word for “light.” Science
a room, the room immediately fills with light. Light travels so fast that fiction films have made use of this
something travelling at the speed of light could circle Earth’s equator about term (for example, photon torpedoes
and photonic cannon).
7.5 times in just one second.
NEL 11.1 What Is Light? 463

DID YOU KNOW? Light also travels in straight lines. When you turn on a flashlight in a
The Imaginary Ether dark room with dust in the air, you can see a beam of light travelling in
In the 19th century, scientists thought a straight line (Figure 3). Sharp shadows around objects such as trees or
that a luminiferous (“light-carrying”) railings are also evidence of the straight-line nature of light. In fact, that is
substance, called ether, was necessary
why you can see Earth’s shadow on the Moon during a lunar eclipse. But
for light to travel through outer space.
Today, scientists know that light is an what exactly is light?
electromagnetic wave and does not
require a medium to travel through the
vacuum of outer space.
Figure 3 A flashlight shows very clearly that light travels in straight lines.
Light—An Electromagnetic Wave

Recall that heat energy can be transferred by either conduction or
convection. Both methods involve particles to transfer heat. That is,
medium any physical substance through conduction and convection require a medium for transmission. A medium
which energy can be transferred is any physical substance that acts as a carrier for the transmission of
energy. Conduction occurs most often in solids, whereas liquids and gases
are often good carriers for convection. Light, however, travels through the
vacuum of outer space. This means that light does not require a medium
radiation a method of energy transfer for transmission. Instead, light energy is transferred through radiation.
that does not require a medium; the In 1801, English physicist Thomas Young demonstrated that, under
energy travels at the speed of light
certain conditions, light shows wave-like properties. In 1864, James Clerk
Maxwell (Figure 4), another English physicist, predicted that electricity
and magnetism couple together, in an incredibly fast game of hop-skip-
jump, to form a chain travelling through
space. He also predicted that the resulting
electromagnetic wave a wave that has electromagnetic wave does not require
both electric and magnetic parts, does a medium for transmission and that
not require a medium, and travels at the this wave travels at the speed of light.
speed of light
Unfortunately, Maxwell died at the
young age of 48 and did not live
to see his prediction confirmed. Proof
of the existence of electromagnetic
waves came in 1887 when German
DID YOU KNOW?
physicist Heinrich Hertz discovered
X—the Unknown
Roentgen called the rays that he
low-energy electromagnetic waves that
discovered in 1895 “X-rays” because we now call radio waves. Additional proof
he did not initially know what they came in 1895 when William Konrad
were. The “X” stood for unknown. Roentgen, another German scientist, Figure 4 James Clerk Maxwell
Today, the German word for X-ray is discovered high-energy electromagnetic (1831–1879) predicted the existence
“Roentgen.”
waves called X-rays. of electromagnetic waves.

Today, scientists have identified many different kinds of electromagnetic visible light electromagnetic waves that
waves in addition to radio waves and X-rays. Microwaves, radar, and the human eye can detect
ultraviolet light are a few examples of other electromagnetic waves. Visible electromagnetic spectrum the
light is any electromagnetic wave that the human eye can detect. Scientists classification of electromagnetic waves
by energy
classify electromagnetic waves based on the energy of the waves. This
classification system is called the electromagnetic spectrum (Figure 5).
visible light
radio waves microwaves infrared light ultraviolet light X rays gamma rays
increasing energy
Figure 5 The electromagnetic spectrum. Note the different categories as the energy of the
electromagnetic wave increases.
RESEARCH THIS PROTECTIng YOURSELF FROM THE SUn

SKILLS HANDBOOK
SKILLS: Researching, Analyzing the Issue, Communicating, Evaluating 4.A, 4.C.5.
In recent years, newspapers, radio, and TV have been regularly 2. Research the rating scale that has been set up to determine
providing updates on how safe it is to go unprotected in the safe exposure limits.
Sun, particularly in the summer. In this activity, you will research 3. Research what you can do to protect yourself from
why exposure to the Sun and to tanning lamps is now a health overexposure to the Sun.
concern. You will also investigate the rating scale used to
4. Research the type of light emitted by tanning lamps. Find out
determine safe limits of exposure and how to protect yourself
the health concerns associated with exposure to these lamps.
from overexposure (Figure 6).
A. Why is some exposure to the Sun necessary? T/I

B. Why can overexposure to the Sun be a health risk? T/I
C. Explain how the UV index has been set up. T/I
D. What is the difference between UVA and UVB? T/I
E. What does SPF mean? T/I
F. How is sunblock different from sunscreen? T/I
G. List the criteria that you would use to choose the best type of
sunscreen for yourself. T/I
H. List other things that you can do to protect yourself from
Figure 6
overexposure to the Sun. T/I
1. Research why extended sun exposure can be hazardous to I. Compare exposure to tanning lamps with Sun exposure. T/I
your health. Find out some positive benefits of moderate sun J. Create an information poster or brochure to educate people
exposure. about protecting themselves from the Sun. T/I A C

DID YOU KNOW? Electromagnetic Waves in Our Society
Adaptation Affects Detection Electromagnetic waves have many uses. Table 1 shows some of the uses and
A bee’s eyes are adapted to detect
natural phenomena that involve electromagnetic waves.
ultraviolet light when locating flowers.
Similarly, the human eye is adapted to
Table 1 The Many Uses of Electromagnetic Waves
detect visible light but not other types of
electromagnetic waves. Being unable to Type of
see other electromagnetic waves does electromagnetic wave Use/phenomena
not mean that they are not there or that
you are not affected by them. radio waves • AM/FM radio
• TV signals
• cellphone communication
• radar
WRITIng Tip • astronomy (for example, discovery of pulsars)
Use facts, statistics, examples, or
microwaves • telecommunications
reasons to support your main idea. For
• microwave ovens
example, in a persuasive essay about
• astronomy (for example, background radiation associated
the benefits of electromagnetic waves,
with the Big Bang)
you might include supporting details
from a variety of sources.
infrared light • remote controls (for example, DVD players and

game controllers)
• lasers
• heat detection (for example, leakage from windows, roofs)
and remote sensing
• keeps food warm (in fast-food restaurants)
• astronomy (for example, discovering the chemical
composition of celestial bodies)
• physical therapy
increasing energy
visible light • human vision

• theatre/concert lighting
• rainbows
• visible lasers
• astronomy (for example, optical telescopes, discovering
the chemical composition of celestial bodies)
ultraviolet light • causes skin to tan and sunburn

• increases risk of developing skin cancer
• stimulates production of vitamin D
• kills bacteria in food and water (sterilization)
• “black” lights
• ultraviolet lasers
• astronomy (for example, discovering the chemical
composition of celestial bodies)
X-rays • medical imaging (for example, of teeth and broken bones)
• security equipment (for example, scanning of luggage at
airports)
• cancer treatment
• astronomy (for example, study of binary star systems,
black holes, the centres of galaxies)
gamma rays • cancer treatment
• astronomy (for example, study of nuclear processes
in the universe)
• product of some nuclear decay

The Colours Associated with Visible Light
White visible light is composed of a continuous sequence of colours.
This colour sequence is called the visible spectrum (Figure 7). visible spectrum the continuous
Traditionally, seven distinct colours have been identified: red, orange, sequence of colours that make up
white light
yellow, green, blue, indigo, and violet.
Observe the colours in white light by doing the “Viewing the Visible
Spectrum” activity.
increasing energy
Figure 7 The visible spectrum for white light. Can you see the seven traditional colours that
Newton identified?
T RY THIS VIEWIng THE VISIBLE SPECTRUM

SKILLS MENU: Predicting, Observing, Analyzing, Communicating SKILLS HANDBOOK
1.B.
Equipment and Materials: a ray box; two triangular prisms;
a sheet of white paper
Part A Part B
1. Place one prism on a sheet of paper. Trace its outline. 3. Predict whether or not prisms can be used to recombine a
When handling the triangular glass prism, take care not to spectrum back into a beam of white light. If this is possible,
cut your fingers if it is chipped. how many prisms do you think would be needed?
2. Shine a single beam of light from the ray box on one side of 4. Test your prediction by using a variety of prisms to first
the prism (Figure 8). Adjust the position of the ray box until create a spectrum, and then to attempt to reform the beam
a clear spectrum is visible on the other side of the prism. of white light. Experiment with different numbers and
Identify the colours that you can clearly see in the spectrum. arrangements of prisms. Figure 9 illustrates just one of
Mark the location of each colour on the paper. Note that the many possible arrangements.
spectrum is easier to observe if the room is dark.
When unplugging the ray box, do not pull the electric cord.
Pull the plug itself.
Figure 9
5. Make careful drawings of any successful prism

arrangements.
Figure 8 C. Were your predictions correct? Explain. T/I
D. Make a general statement about the composition of white
A. How many of the seven colours that Newton identified were
light. T/I
you able to see? Discuss with your lab partner why all of the
seven colours might not be clearly visible. K/U T/I
B. Write down an example in nature where you can see a similar
visible spectrum. Share your example with your lab partner. A

LEARnIng Tip The previous experiment is similar to one
Remembering a Sequence performed by English physicist Isaac Newton
A mnemonic is a word technique to help (Figure 10) in 1666. As you discovered in the
remember a more complicated sequence. activity, a triangular prism slows down the
The fi ctitious name ROY G. BIV is a
speed of light. In a vacuum, each colour
mnemonic to remember the order of
colours in white visible light: Red, Orange, of the visible spectrum travels at the
Yellow, Green, Blue, Indigo, and Violet. same high speed: the speed of light. But
Can you think of another way to remember within the prism, each of these colours
this colour sequence? travels at a slower speed than the speed
of light in a vacuum. Red light, the least
To learn more about Newton’s
life and work, energetic, is slowed the least, whereas violet
GO TO NELSON SCIENCE light, the most energetic, is slowed the most.
That is why a prism can separate white
light into different colours. The behaviour
Figure 10 Isaac Newton (1642–1727)
of light entering glass is discussed in more was the first person to separate white
detail in the next chapter. light into the visible spectrum.
DID YOU KNOW? Newton was the first scientist to state
Invisible Energy that seven distinct colours were visible in white light. He coined the term
In 1800, German-born astronomer “spectrum” to describe them, which means “appearance” in Latin. Some
William Herschel placed a thermometer people have difficulty identifying indigo as a separate colour between blue
in the path of each colour of the visible and violet.
spectrum in order to measure the
temperature associated with it. He was
quite surprised when he placed his The Surprising Universe
thermometer in the dark region beyond For centuries, visible light was the only tool that astronomers could use
the red light and noticed a higher
temperature than any temperature
to probe the universe. Today, when astronomers look at an image of a
in the spectrum. Herschel concluded galaxy photographed using X-rays, they see a completely different picture
that there must be an invisible form of than if they looked at the same galaxy using visible light (Figure 11).
energy next to visible red light. He had
discovered infrared light. The prefix
“infra” means “below.”
Figure 11 The galaxy Centaurus A

appears quite different when examined
using X-rays, visible light, or radio
waves. A composite photo combining all
three electromagnetic rays gives a more
complete view of Centaurus A.

Scientists now realize that visible light provides only limited information
about the universe. By using other parts of the electromagnetic spectrum to
collect and analyze data about stars and galaxies, scientists have discovered To learn more about telescopes
that the universe is a far more violent and surprising place than they had that do not use visible light,
imagined. GO TO NELSON SCIENCE
In SUMMARY
• Electromagnetic waves travel at the speed of light • The electromagnetic spectrum consists of light
in a vacuum and do not require a medium for listed according to its different energy levels. The
transmission. order from least energy to most energy is radio
• Light is an electromagnetic wave. waves, microwaves, infrared light, visible light,
ultraviolet light, X-rays, and gamma rays.
• White light is composed of a continuous
spectrum of colours.
CHECK YOUR LEARnIng

1. In terms of heat transfer, how is radiation different from 10. Prepare a mind map listing as many physical
conduction and convection? K/U properties for light as you can. Base your mind map on
2. What two major properties did Maxwell predict that Figure 12. T/I C
electromagnetic waves would possess? K/U
3. What two discoveries confirmed the existence of
electromagnetic waves? K/U
4. Write these electromagnetic waves in order from lowest
energy to highest energy: infrared light, X-rays, red light,
gamma rays, and microwaves. K/U
5. Sunscreen, if used properly, can protect you from getting
a sunburn. From which electromagnetic waves must
sunscreen protect the skin? K/U
6. List the seven colours that Newton identified in the visible
spectrum of white light. K/U
7. Why is it useful to examine the universe using parts
of the electromagnetic spectrum other than visible
light? K/U A
8. List some devices that you have used or plan to use today
that involve electromagnetic waves. K/U A
Figure 12
9. Match each electromagnetic wave from column A with the
term from column B that is most closely related. K/U A 11. Briefly describe how you could demonstrate that white
light is composed of many different colours. C
Column A Column B
(a) X–rays vitamin D
(b) ultraviolet light telecommunications
(c) radio waves cancer treatment
(d) infrared light radar
(e) microwaves theatre/concert effects
(f) amma rays baggage screening
(g) visible light DVD player remote control
0-17-635528-6
NEL
FN C11-F49-UDOS10SB 11.1 What Is Light? 469
CO Nesbitt
11.2 How Is Light Produced?
Most people think that light comes only from sources such as the Sun, a
light bulb, or a fire. The reality is that light enters your eyes from all objects
that you see. You can see a tree in front of you only if light is coming from
the tree into your eyes (Figure 1). The difference between light coming from
the Sun and light coming from a tree is that the Sun radiates its own light,
whereas the tree can only reflect light.
The Sun is luminous, which means that it produces its own light.
Other examples of luminous sources are a light bulb, a lit match, and a
Figure 1 The Sun produces its own light, flashlight that is turned on. A tree does not produce its own light, so it is
whereas a tree can only reflect light.
non-luminous. A non-luminous source does not produce its own light
luminous produces its own light and can be seen only by using reflected light. Most objects around you are
non-luminous does not produce its non-luminous: this textbook, a pencil, and a bicycle are just a few. Let’s now
own light examine some luminous sources to see exactly how they produce light.
Light from Incandescence

When the burner of a stove is set to a high temperature, the filament
glows. Any object, as it gets hotter and hotter, will eventually produce
light (Figure 2). As the object gets hotter, the colours of light produced
change from red, to orange, to yellow, to white, and then to bluish-white.
This process of producing light as a result of high temperature is called
incandescence. Light from a burning candle and the lit sparks flying off a
grinder are examples of incandescence.
Incandescence also occurs in an incandescent light bulb (Figure 3).
A thin wire filament, usually made of tungsten, glows as electricity passes
Figure 2 Molten glass glows orange at
through it. The filament becomes so hot that it gives off visible light. It also
very high temperatures. emits infrared light that you feel as heat radiating from the bulb. Depending
on the type of bulb, only 5 % to 10 % of the electricity going through the
incandescence the production of light as
filament is actually converted into visible light. The rest of the energy is
a result of high temperature
converted into infrared light. For this reason, incandescent bulbs are very
inefficient light sources.
For an incandescent bulb to work, all the air from the bulb must be
removed. It is replaced with non-reactive gases. This way, the tungsten
filament cannot combine with oxygen in the air, which would make the
filament burst into flame. Even without oxygen present, the filament does
eventually disintegrate and break.
American inventor Thomas Edison is credited with producing the first
commercially useful incandescent bulb (Figure 4).
Figure 3 The modern incandescent bulb Figure 4 Compare Thomas Edison’s patent from

1880 for an incandescent bulb with Figure 3.
Light from Electric Discharge
Every time you see a flash of lightning (Figure 5) or walk past a lit neon sign
for a business (Figure 6), you are seeing another form of light production. This
light, known as electric discharge, is produced by an electric current passing electric discharge the process of
through a gas. The electricity causes the gas to glow. Although the term “neon producing light by passing an electric
current through a gas
lighting” is usually used to describe all signs that use this process, many gases
other than neon can be used. Neon gas produces the familiar red colour,
helium produces a gold-coloured glow, argon a pale violet-blue, and krypton a
greyish off-white.
DID YOU KNOW?

Canadian Bright Lights
Many people contributed to the
development of the incandescent bulb.
Two Torontonians, Henry Woodward
and Mathew Evans, fi led a Canadian
patent in 1874 for an incandescent
bulb. Their bulb used a carbon filament
and was filled with nitrogen gas. They
tried to market their bulb but had no
commercial success. Edison recognized
the usefulness of their work and
purchased the rights to their patent.
He incorporated their work into the
development of his own incandescent
bulb using a carbon filament.
Figure 5 Lightning is a dramatic example of Figure 6 Neon gas produces this
an electric discharge through a gas. In this characteristic red colour as an electric
case, the gas is the air in Earth’s atmosphere. current passes through it.
The development of electric discharge in gas tubes comes from the WRITIng Tip
invention in 1855 of a powerful vacuum pump by German physicist Writing Persuasively
Heinrich Geissler. The pump allowed Geissler to evacuate (remove) most of Imagine that you are writing an essay
the air from a closed tube. Geissler’s colleagues noticed that the remaining promoting the idea that Canadians
air in one of these tubes glowed when an electric current passed through developed the electric light bulb before
Thomas Edison did. Use the body of the
it. Further experiments showed that the colour of the glow depended on essay to state and explain the key points
which gas was inside the tube. These glowing gas tubes were originally of your argument. For example, state the
called Geissler tubes (Figure 7). When you look at the different colours of date of the Canadian patent, reasons for
commercial lighting, you are really looking at Geissler tubes. the patent’s failure, and so on.
(a) (b) (c)
Figure 7 Because Geissler was also a glass-blower, early Geissler tubes were very elaborate.
NEL 11.2 How Is Light Produced? 471

DID YOU KNOW? Light from Phosphorescence
Watch That Dial! People are familiar with objects that glow in the dark, such as the dials on some
Watch dials from the early 20th century
wristwatches and clocks, and glow-in-the-dark stickers. These glow-in-the-dark
to shortly after World War II were made
luminous through the use of a paint materials are coated with phosphors, special materials that give off light through
that contained radium. Radium is a a process called phosphorescence. Phosphors absorb light energy, primarily
radioactive material, and the health ultraviolet light. These materials keep some of the energy and release visible light
effects of radioactivity were not widely of lower energy. However, they do not do so immediately and hold onto this
understood at that time. As a result,
many of the people who worked at
energy for varying periods of time ranging from seconds up to days, depending
those watch factories suffered serious on the material. Because light is emitted over a period of time, phosphorescent
health effects from exposure to radium. materials are often described as “glow-in-the-dark” (Figure 8).
phosphorescence the process of Light from Fluorescence

producing light by the absorption of Several laundry detergents claim that they can make clothes brighter. This claim
ultraviolet light resulting in the emission of
depends on the process of fluorescence. Fluorescence occurs when an object
visible light over an extended period of time
absorbs ultraviolet light and immediately releases the energy as visible light.
fluorescence the immediate emission Detergent manufacturers often add fluorescent dyes to their detergents.
of visible light as a result of the absorption Shirts washed in this detergent appear to glow slightly. This process is
of ultraviolet light apparent even in visible light because normal daylight includes a small
amount of ultraviolet light. The fluorescent dye on the clothing absorbs
UV light and emits visible light. The eye detects both this emitted light
and the light normally reflected from the shirt, so the shirt looks brighter.
Highlighter pens work on the same principle. The ink in these pens
contains a fluorescent dye that causes the ink to glow in the presence of the
ultraviolet part of normal daylight.
Fluorescent lights are the most common application of fluorescence.
A fluorescent light makes use of both electric discharge and fluorescence.
A fluorescent light tube is filled with very low-pressure mercury vapour. The inner
surface of the tube is also coated with a fluorescent material. When
a fluorescent light is turned on, the electric current causes the mercury atoms to
Figure 8 Glow-in-the-dark toys are emit ultraviolet light. This ultraviolet light then strikes the fluorescent inner surface
examples of phosphorescence. of the tube, resulting in the production of visible light (Figure 9).
DID YOU KNOW?

Rock On
The process of fluorescence is named
after the mineral fluorite. Fluorite visible light
glows when it is illuminated with
heat
ultraviolet light. Many other naturally
occurring minerals also fluoresce
in brilliant colours when exposed to mercury atoms
ultraviolet light.
UV light
fluorescent coating
location of electric discharge

Figure 9 In a fluorescent light, electricity causes the mercury vapour to emit ultraviolet light.
This ultraviolet light hits the fluorescent material on the inner surface of the light tube, causing
visible light to be emitted.

Fluorescent lights are four to five times more energy efficient
than incandescent bulbs. A fluorescent light can provide the
same light output as an equivalent incandescent bulb but
produces much less heat and uses far less electricity. Compact
fluorescent lights (CFLs) are recommended for use in homes
and businesses because they use less energy to operate
(Figure 10).
Widespread use of fluorescent lights could lead to significant
energy savings. Although fluorescent lights are more expensive
to purchase than incandescent bulbs, they are less expensive to
operate and last much longer than incandescent bulbs. There is
one slight downside, however, to fluorescent lights. They contain
mercury and should not be disposed of with regular household
waste. Instead, fluorescent lights should be treated like other
hazardous household waste, such as paint and batteries.
Fluorescent lights need to be taken to appropriate recycling
centres, where they will be properly treated.
Figure 10 Compact fl uorescent lights (CFLs) can lead
to significant energy savings in homes and businesses.
CITIZEn ACTION
SKILLS HANDBOOK
Thinking for the Future 4.A.7, 4.C.6.
The Issue What Can You Do To Help?
Much of the energy used by our society comes from fossil Think of how you can personally reduce your contribution to
fuels. These fuels add significant amounts of pollutants and global warming. Examine the lighting in your home, and see
greenhouse gases to Earth’s atmosphere. Greenhouses gases where you could use CFLs. Wherever possible, actually change
are a major factor in global warming. the lights in your home from incandescent to CFL. Estimate how
It is estimated that if each household in Canada replaced just much energy you are saving because of this and the personal
one 60 W incandescent bulb with an equivalent light output effect that you are having on greenhouse gas production.
15 W CFL, then there would be an energy saving of $73 million Develop an ad campaign to encourage your community to
per year. In addition, that one CFL would reduce carbon dioxide switch to CFLs. Remember to think globally and act locally.
emissions by 400 000 t—the equivalent of taking 66 000 cars
off the road.
Light from Chemiluminescence

Have you ever played with a light stick or a glow stick? Have you ever worn
a necklace or bracelet at a concert or fair that, when bent and shaken, gave
off visible light? If so, you have seen light produced by chemiluminescence.
Chemiluminescence is the production of light as a direct by-product of chemiluminescence the direct
a chemical reaction. Almost no heat is produced as a result of this type of production of light as the result of
a chemical reaction with little or no
reaction. That is why this type of light is often called “cold light”.
heat produced
Light sticks operate by causing two chemicals to mix. The chemicals are
originally separate in the light stick. One chemical is in a narrow, small glass
vial in the middle of the stick; the second chemical is in the main body of
the stick. Bending the light stick in the middle causes the small glass vial to
break, allowing the two chemicals to mix in the main body of the stick. The
chemical reaction that occurs produces visible light.

Light sticks are inexpensive to manufacture (Figure 11). They are very
popular for use in camping, with law enforcement and military personnel,
in entertainment venues (concerts, dance halls, amusement parks), and
in emergency situations. Light sticks are very durable. Because they have
no moving parts and are completely sealed, they are very popular with
underwater divers. Light sticks do not require an electric current, so they
are useful in hazardous environments where a spark could be quite
dangerous. Examine the effect of temperature on a light stick by doing
the “Glowing with Light” activity.
Figure 11 Light sticks, or glow sticks,

produce light by chemiluminescence as
the result of two chemicals mixing.
T RY THIS gLOWIng WITH LIgHT

SKILLS MENU: Predicting, Controlling Variables, Observing SKILLS HANDBOOK
3.B.
Equipment and Materials: a light stick; freezer; two large 5. Place the light stick in a freezer for several hours. Predict
beakers or transparent plastic containers; ice cubes; tap water what will happen. Then take the light stick out of the freezer
and observe the amount of light emitted.
NOTE: This activity is best done in a darkened room.
6. Let the frozen light stick return to room temperature and
Light sticks contain broken glass. Also, the chemicals may
make a final observation of the amount of light emitted.
be toxic. If a stick is damaged, ask your teacher how to
A. Were your predictions correct? T/I
properly dispose of it.
B. What happened to the light output when the light stick was
1. Fill one beaker with warm tap water. Place ice cubes in the
cooled? When it was warmed? T/I
other beaker and fill it with cold tap water.
C. Explain the changes in light output. Consult with other
2. Bend the light stick. Observe the amount of light that the light
classmates. T/I
stick emits at room temperature.
D. What effect did the freezer have on the light stick? What
3. Predict what will happen when you cool the light stick. Then
happened when it returned to room temperature? Explain
place the light stick in the ice-water mixture. Observe the
your observations. T/I
amount of light emitted.
4. Predict what will happen if you heat the light stick. Now
place the light stick in the beaker with warm water. Again,
observe the amount of light emitted.

Light from Bioluminescence
When chemiluminescence occurs in living organisms, scientists call it bioluminescence the production of
light in living organisms as the result
bioluminescence. Bioluminescence occurs in a wide variety of organisms,
of a chemical reaction with little or no
including certain bacteria, fungi, marine invertebrates, fish, and the well- heat produced
known examples of glow-worms and fireflies (Figure 12). In fact, the glow
from a firefly is an excellent example of bioluminescence caused by the
chemical reaction of oxygen and luciferin, a substance in the lower abdomen
of the insect. The enzyme luciferase is necessary for the chemical reaction
to take place. The end result is the production of visible light. Scientists
think that living organisms use bioluminescence to protect themselves from
predators, to lure prey, or to attract mates.
Light from Triboluminescence

“It is well known that all sugar, whether candied or plain, if it be hard,
will sparkle when broken or scraped in the dark.” English philosopher
Francis Bacon wrote this in Novum Organum in 1620, a book in which he
argued that science should be based on experimentation. This statement is
the first known reference to triboluminescence. Triboluminescence is the Figure 12 A firefly exhibiting
bioluminescence
production of light when certain crystals are scratched, crushed, or rubbed
(Figure 13). Unlike other methods of producing light, triboluminescence triboluminescence the production of
does not appear to have any practical application at this time. Do light from friction as a result of scratching,
the activity called “Eating Candy for the Sake of Science” to observe crushing, or rubbing certain crystals
triboluminescence.
Figure 13 The glow from triboluminescence is visible after rubbing two quartz crystals together.
T RY THIS EATIng CAnDY FOR THE SAKE OF SCIEnCE

SKILLS MENU: Observing SKILLS HANDBOOK
3.B.6.
Equipment and Materials: two sugar cubes; a 3. Stand in front of a mirror or face your partner. Bite down
wintergreen-flavoured hard candy; a lab partner or a on a wintergreen candy but keep your mouth open.
large mirror Observe the inside of your mouth.
1. Go into a completely dark room. Wait at least 5 min until your A. Describe what you saw when the two sugar cubes were
eyes become adjusted to the dark. struck. T/I
2. Strike the two sugar cubes against one another as if you B. What did you see when biting down on the candy? T/I
were striking a match. Observe what happens.

light-emitting diode (LED) light produced
as a result of an electric current flowing in
Light from a Light-Emitting Diode (LED)
semiconductors A light-emitting diode (LED) is an electronic device that allows an electric
semiconductor a material that allows an
current to flow in only one direction. This is achieved by using special
electric current to flow in only one direction materials called semiconductors, such as silicon. Unlike a conductor, which
allows current to flow in either direction, semiconductors allow an electric
current to flow in only one direction. When an electric current flows in the
allowed direction, the LED emits light.
An LED differs in several ways from an incandescent bulb: it does not
require a filament; it does not produce much heat as a by-product; and it is
more energy efficient. For a long time, the major consumer application of
LEDs was as indicator lights in electronic devices (for example, the small red
light to show that a radio was on). Recent improvements in LED technology
have led to their use in other areas. LEDs are now used in Christmas lights
(Figure 14), illuminated signs, and traffic lights. Recent advances in LED
Figure 14 LED Christmas lights use far manufacturing may reduce the cost of production in the near future. You
less electricity than other kinds of lights. may well see LEDs being used for street lights and lighting in your home.
In SUMMARY
• Incandescence is light emitted when a material • Chemiluminescence is light produced from
has been heated. a chemical reaction without an increase in
• Light from an electric discharge is caused by temperature; chemiluminescence in living
passing an electric current through a gas. organisms is called bioluminescence.
• Phosphorescence and fluorescence are both • Triboluminescence is light produced from
caused by a material absorbing ultraviolet light. friction with crystals.
In phosphorescence, visible light is emitted over • A light-emitting diode (LED) is a special
a period of time, whereas in fluorescence, visible electronic device that produces light when an
light is emitted immediately. electric current flows through it.
CHECK YOUR LEARnIng

1. In Grade 9 science, you studied the differences among 6. Predict whether or not a fl uorescent material would glow
stars, planets, and moons. Which are luminous, and if it was illuminated by infrared light. T/I
which are non-luminous? Explain why this second group 7. Why is chemiluminescence also called “cold light”? K/U
is classified as non-luminous. K/U

8. Predict whether or not a light stick would be a good light
2. Why is an incandescent bulb a very inefficient light source in a potentially explosive environment. Explain your
source? K/U prediction. T/I C
3. Name the process of producing light by passing an 9. State several reasons why living organisms might use
electric current through a gas. K/U bioluminescence. K/U C
4. What is the main difference between phosphorescence 10. What are two differences between LEDs and incandescent
and fluorescence? K/U bulbs? K/U C
5. (a) Do fluorescent brighteners in detergents really make 11. LEDs are considered an even better alternative to CFLs to
clothes cleaner? replace incandescent bulbs. Compare CFLs with LEDs.
(b) There is concern that extra additives in detergents can Are LEDs a better alternative? Be sure to consider
have negative health and environmental impacts. Is environmental, health, and economic factors. Write a brief
it wise to use detergents containing these additives? report to communicate your opinion. K/U T/I A
Explain. K/U T/I A

The Laser—A Special Type of Light 11.3
In the previous section, you learned about light from many different
sources. Each of those light sources emits electromagnetic radiation of many
different energies and in all directions. In this section, you will examine
lasers as a light source. You will also find out how laser light is different from
other forms of light.
Light from a laser has very special properties. Incandescent bulbs emit DID YOU KNOW?
electromagnetic waves of many different energy levels. A laser, in contrast, Laser Tongue-Twister
produces electromagnetic waves of exactly the same energy level. This “Laser” is an acronym for Light
results in visible laser light being of a very pure colour. If you shine red laser Amplification by Stimulated Emission
of Radiation.
light at a triangular prism, the light exiting the triangular prism will still
look red. Recall that white light shone at a triangular prism separates into
the colours of the visible spectrum.
Laser light is also very intense. This is because the electromagnetic waves
travel in exactly the same direction and the waves are exactly in unison
(Figure 1). These characteristics are very different from light radiating from
an incandescent bulb. That is why laser light is pure in colour, very intense,
and concentrated in one narrow beam. For this reason, you should never
look directly into a laser beam—it could damage your eyes. These unique
properties of lasers make them very useful. A high-energy laser can be used
to burn a hole through steel in a manufacturing process. It can also be used
by a surveyor to measure distances. Scientists have even
used lasers directed at the Moon to measure the
Earth–Moon distance 385 000 km
with an accuracy of 3 cm.
light bulb
(a) light bulb
Figure 1 (a) The light bulb emits many

different electromagnetic waves.
(b) A laser emits electromagnetic waves
(b) laser source that are all exactly the same.
NEL 11.3 The Laser—A Special Type of Light 477

laser source
RESEARCH THIS LASERS FOR DIFFEREnT USES
4.A.
There are many different kinds of lasers, and each kind has a 1. Research the characteristics and applications of helium-neon
specific use (Figure 2). In this activity, you will research some lasers.
of these lasers and uses. 2. Research at least three practical applications of lasers. Find
out what type of laser is used in each case. Identify which
type of electromagnetic wave each laser produces.
3. Research the type of laser used to correct vision problems.
Identify which type of electromagnetic wave this laser
produces.
A. What type of electromagnetic wave is produced by a

helium-neon laser? K/U T/I
B. What are three different types of lasers? Where is each of
these lasers used? K/U T/I
C. Which laser is used to correct vision problems? What type
Figure 2 Lasers are often used in concerts or at dance halls. of electromagnetic wave does this laser produce? T/I
In SUMMARY
• Laser light consists of electromagnetic waves of • Laser light is very pure in colour, is intense and
exactly the same energy level, travelling in unison concentrated in one narrow beam, and can travel
in exactly the same direction. great distances without spreading out.
CHECK YOUR LEARnIng

1. List three properties that make laser light different from 4. Why should you never look directly into a laser beam? K/U
light emitted by an incandescent bulb or a flashlight. K/U 5. Use a diagram to illustrate how laser light is different from
2. A laser with green light is shone at a triangular prism. white light. K/U
What will be the colour of the light leaving the prism? 6. List at least four common applications of lasers that you
Explain. K/U are familiar with. K/U
3. As you read in this section, scientists have used laser light
to accurately measure the distance between Earth and the
Moon.
(a) What properties of laser light allow us to measure
such great distances?
(b) Why could white light produced by a very powerful
searchlight not be used for this same measurement?
K/U T/I

The Ray Model of Light 11.4
A laser beam clearly shows that light travels in a straight line. This
fundamental property of light (Figure 1) can be used to understand how
light behaves when it strikes a mirror or a lens.
yes
no
Figure 1 Evidence that light travels in

straight lines is that you never see a
flashlight beam go around a corner.
A luminous object such as a candle radiates light in all directions. This

is easily seen because a candle will illuminate all objects surrounding it in
a complete sphere. You can illustrate this more easily by using the concept
of light rays. A light ray is a line and arrow representing the direction light ray a line on a diagram representing
and straight-line path of light. Because the candle is radiating light in all the direction and path that light is
travelling
directions, an infinite number of light rays come from the candle. You need
to draw only a few light rays to represent the overall picture (Figure 2).
light ray
Ontario Science 10 SB another
0-17-635528-6 light ray
FN C11-F10-UDOS10SB
CO Creative Freelancers
Sam Laterza
sphere of light
Pass First Pass
around the
Approved luminous source geometric optics the use of light rays
to determine how light behaves when it
Not Approved strikes objects
Figure 2 You need to draw only a few light rays to represent the light radiating from a candle. incident light light emitted from a source
that strikes an object
The use of light rays to determine the path of light when it strikes an transparent when a material transmits all
object is called geometric optics. When light emitted from a source (such as or almost all incident light; objects can be
the Sun) strikes an object (such as Earth), the light is called incident light. clearly seen through the material
Recall that matter can be classified into three categories, depending on how translucent when a material transmits
it behaves when light strikes it. A transparent object (such as clear glass) some incident light but absorbs or reflects
the rest; objects are not clearly seen
lets light pass through it easily and allows objects behind it to be clearly
through the material
seen. A translucent object (such as frosted glass) allows some light to pass
C11-F11-UDOS10SB.ai
through but does not allow you to clearly see objects behind it. An opaque opaque when a material does not
transmit any incident light; all incident
material (such as cardboard) does not allow any light to pass through light is either absorbed or reflected;
it. Instead, all incident light is either absorbed or reflected, and it is not objects behind the material cannot be
Science 10 SB possible to see objects behind the opaque material. seen at all
528-6 NEL 11.4 The Ray Model of Light 479

C11-F11-UDOS10SB
T RY THIS SEEIng THE LIgHT
SKILLS MENU: Observing, Evaluating SKILLS HANDBOOK
3.B.6., 3.B.8.
Equipment and Materials: flashlight; atomizer or similar spray 4. Spray water from the spray bottle into the air between the
bottle filled with water flashlight and the location of the beam on the wall.
1. Place a fl ashlight on a desk and aim it at the wall. Turn on A. Could you see the beam of light in the air? T/I
the flashlight. B. What happened to the light beam when you placed your hand
2. Turn off the lights in the classroom. Examine the beam on the in its path? T/I
wall and the air in the path of light from the flashlight to the C. What did you see when you sprayed the water? T/I
wall. D. What is necessary in order for you to see light? T/I
3. Place your hand in the path of the beam and observe the E. Suggest a reason to explain why you could see the light
beam. beam only when there was atomized water in the air. T/I
Flat Mirrors
“Mirror, mirror on the wall, who’s the fairest one of all?” This famous line
from the fairy tale Snow White is uttered by the evil queen, who does not
want anyone in her land to be prettier than she. The queen is looking at her
image reproduction of an object through image in a mirror. An image is a reproduction of an original object that is
the use of light produced through the use of light. A mirror is any polished surface that
mirror any polished surface reflecting an exhibits reflection (Figure 3). Reflection is simply the bouncing back of
image light from any surface. In the previous activity, you noticed that in order to
reflection the bouncing back of light from see light, some light rays must reflect off a surface and then enter your eyes.
a surface The queen in Snow White used the mirror in the way it has been used for
thousands of years, as a way to check her physical appearance. This is still
the most common use of mirrors today.
Figure 3 On a still day, the water of a lake can be smooth enough to behave like a mirror.
Most mirrors consist of two parts: The front part is a sheet of glass, and
the back part is a thin layer of reflective silver or aluminum. This version of
the mirror originated in the 12th and 13th centuries. Mirrors existed prior
to this time, but they were made of highly polished metals such as bronze
(Figure 4), tin, or silver. Mirrors such as those in your home did not become
common until the 17th and 18th centuries.
The reflective part of a mirror is the shiny thin film on the back. The glass
protects the thin film and aids in the physical appearance of the mirror.
Figure 4 A Celtic bronze mirror that is The symbol that is used in physics to represent a mirror refers only to the
almost 3000 years old reflective thin film (Figure 5).

Actual Mirror Scientific Symbol
reflective
surface
glass opaque side
reflective
thin film
Figure 5 Comparing the side view of an
actual mirror with its scientific symbol
The Terminology of Reflection

A plane mirror, or a flat mirror, illustrates how predictable the path plane flat
of light is when it hits the mirror. The original incoming ray is called the incident ray the incoming ray that strikes
incident ray. The ray that bounces off the mirror is called the reflected a surface
ray. The normal is the line that is perpendicular, or at right angles, to reflected ray the ray that bounces off
the reflecting mirror surface. The normal is drawn at the point where the a reflective surface
incident ray strikes the surface of the mirror. The angle of incidence is the normal the perpendicular line to a
and the normal. The angle of reflection is the
angle between the incident rayC11-F12-UDOS10SB.ai mirror surface
angle between the reflected ray and the normal (Figure 6). perpendicular at right angles
You will examine how these terms apply to plane mirrors when you do
angle of incidence the angle between
Activity 11.5: Reflecting Light Off a Plane Mirror. the incident ray and the normal
o Science 10 SB normal angle of reflection the angle between
35528-6 the reflected ray and the normal
C11-F12-UDOS10SB
incident
CrowleArt Group reflected
ray ray
Deborah Crowle
angle of angle of
1st pass
incidence reflection
ved
proved
Figure 6 Terminology for reflection off a
plane mirror
In SUMMARY
• Light rays are used to represent the direction and • Geometric optics uses light rays to determine
path in which light is travelling. how light behaves when it strikes objects.
CHECK YOUR LEARnIng

1. (a) Name the two parts that make up most mirrors. 4. What has historically been the main use for plane
(b) What is the purpose of each part? K/U mirrors? K/U
2. Clearly explain what is meant by the term geometric 5. In your own words, clearly distinguish between the terms
optics. K/U normal, angle of incidence, and angle of reflection. K/U
3. Classify each of these materials as transparent, 6. Brainstorm to create a list of other uses of plane mirrors
translucent, or opaque: a textbook, frosted glass, a single not mentioned in this section. A
sheet of thin tissue paper, a clean sheet of glass, a rock,
clean air, apple juice, sunglasses. K/U
NEL 11.4 The Ray Model of Light 481
Reflecting Light Off a Plane Mirror SKILLS MENU

Plane mirrors are all around you. The mirror that you look into when Hypothesizing Observing
brushing your teeth, the rear-view mirror in a car, and the mirror that Planning Evaluating
the dentist uses to look inside your mouth are all plane mirrors. In this Controlling Variables Communicating
activity, you will examine how light rays behave when they are reflected
by a plane mirror.
SKILLS HANDBOOK
Purpose 3.B.
To compare the angle of incidence with the angle of

reflection in a plane mirror.

• ray box
incident ray
• plane mirror and mirror supports
• pencil and ruler
• protractor normal
• sheet of paper
Procedure
SKILLS HANDBOOK
1.B.
1. Draw a dashed line across the centre of a sheet Figure 1
of paper. Place a mirror on this line. The back of
the mirror should be on the line, not the glass 5. Remove the ray box and the mirror. Use your
part of the mirror. This is because the back or ruler to draw a straight line through the dots
silvered part of the mirror is the reflective part. until the line hits the top part of the T (where
the normal meets the mirror). Label the incident
2. Place a slit mask on the ray box so that only one
ray as “I1.” Repeat this process for the reflected
ray of light comes out. Aim the incident ray at
ray. Label the reflected ray as “R1.”
the mirror.
6. Use your protractor to measure the angle of
3. Draw a normal to the mirror (that is,
incidence and the angle of reflection for trial 1.
perpendicular to the point where the incident
Remember to measure these angles with respect
ray strikes the mirror). Label this line “normal”
to the normal. Record your measurements in the
(Figure 1).
“Trial number 1” row in a table similar to Table 1.
4. Place several dots on the page with your pencil Table 1 Observations
showing the path of the incident ray. Then place
Trial number Angle of incidence Angle of reflection
several dots on the path of the reflected ray.
1
2
3
4
5

7. Repeat steps 1 to 6 three more times, labelling Apply and Extend
the new incident rays as “I2,” “I3,” and “I4” and (e) Billiards is a game that makes use of reflection
the new reflected rays as “R2,” “R3,” and “R4.” (Figure 2). How could the results of this activity
Make sure that the ray box is at a different angle help you in such a game? T/I A
for all of these trials. It must always be pointed

at the same intersection of the mirror and the
normal. Complete your table for trials 2 to 4.
8. Do a fifth trial, but this time aim the incident ray
directly along the normal. Complete your table
for trial 5.

(a) How did the angle of incidence compare with
the angle of reflection? T/I
(b) In trial 5, you aimed the incident ray directly

along the normal. Describe the path of the Figure 2
incident and reflected rays for this special
case. T/I (f) What other sports or activities make use of
(c) Where might errors occur in this activity? T/I the reflection rule that you discovered in this
activity? A
(d) How would these errors affect your

conclusion? T/I

11.6 The Laws of Reflection
As you observed in Activity 11.5, when you shine an incident light ray at a
plane mirror, the light is reflected off the mirror and forms a reflected ray.
Both the incident ray and the reflected ray behave in a predictable way. This
predictable behaviour of light leads to the two laws of reflection (Figure 1):
1. The angle of incidence equals the angle of reflection.
2. The incident ray, the reflected ray, and the normal all lie in the
same plane. Incident ray, normal, and reflected ray all fall on the same flat surface.
normal
normal
angle of angle of incident reflected

incidence reflection ray ray
(a) (b) mirror surface
Figure 1 Diagrams illustrating the two laws of reflection
When more than one incident light ray is reflected off a surface, the
laws of reflection still hold but the surface affects the way you see the
reflected rays. For example, the reflections off a smooth piece of foil are
not the same as those off a crumpled piece of foil. Find out by doing the
activity “Reflecting Light.”
T RY THIS REFLECTIng LIgHT

SKILLS MENU: Observing, Evaluating SKILLS HANDBOOK
3.B.6., 3.B.8.
Equipment and Materials: flashlight (or an unshielded ray box); 2. Now crumple up the aluminum foil. Open up the crumpled
sheet of aluminum foil (about 30 cm × 30 cm) piece of foil but do not smooth it out. Again, reflect the light
beam off the foil onto the ceiling and examine the reflected
1. Place a smooth piece of aluminum foil fl at on a table. Turn
beam.
off the lights in the room and reflect the beam from the
flashlight or ray box off the aluminum foil. Aim the light A. Describe the shape of the reflected beam on the ceiling when
beam so that it is reflected up onto the ceiling. Examine the the aluminum foil was flat and when it was crumpled. T/I
reflected beam. B. Account for the difference in the reflected beam between
your two trials. T/I
READIng Tip Reflecting Light Off Surfaces

Using Text Layout
Assume that a series of parallel incident rays strike a flat reflective surface.
Subheadings are capitalized. This means
that there are new concepts or ideas in
The angles of incidence for these rays are all identical. This means that their
this section. Write down the main ideas angles of reflection will also all be identical, and the reflected rays will all be
communicated in each subsection. parallel to each other. This is an example of regular or specular reflection.

Specular reflection is the reflection of light off a smooth, shiny surface specular reflection reflection of light off
(Figure 2). Reflection off a plane mirror is specular reflection, as is reflection a smooth surface
off the surface of very still water (Figure 3), or a flat piece of aluminum foil.
incident rays reflected rays
flat surface
Figure 2 How specular reflection works Figure 3 A spectacular example of specular reflection. The water acts
like a plane mirror.
The mirrored surfaces on a disco mirror ball

found in clubs and parties, for example, exhibit
specular reflection. The ball consists of a number of
plane mirrors on a spherical surface that produce
an eye-catching display by reflecting light in all
directions (Figure 4).
What would happen if the parallel incident rays
were directed at an irregular surface? Now the
incident rays would all have different angles of
incidence. This means that their angles of reflection
would also be different. The reflected rays would not
Figure 4 A disco mirror ball is an example of specular reflection from
emerge parallel to each other but would be reflected its many surfaces.
or scattered, in many different directions. This is
called diffuse reflection. Diffuse reflection results from the reflection of diffuse reflection reflection of light off an
light off an irregular or dull surface (Figure 5). Examples of diffuse reflection irregular or dull surface
are reflection off a sheet of paper, a water surface with waves (Figure 6), or a
crumpled piece of aluminum foil.
reflected rays
incident rays
rough surface
Figure 5 How diffuse reflection works Figure 6 Diffuse reflection as a result of ripples in the water
NEL 11.6 The Laws of Reflection 485

T RY THIS RETRO-REFLECTORS
SKILLS MENU: Performing, Observing, Evaluating SKILLS HANDBOOK
3.B.
In this activity, you will draw a diagram of a retro-reflector. You will 4. Use the laws of reflection to draw the second reflected ray.
learn more about retro-reflectors in the next chapter. 5. Repeat steps 2 to 4 using a second incident ray that strikes
Equipment and Materials: ruler; protractor; piece of paper; pencil the mirror at a different angle from the first one. Use a different
colour for each incident ray.
1. Draw two mirrors meeting at a right angle (forming an
L-shape) near the centre of the paper. Pick any orientation that Optional: Do this experiment with two plane mirrors and a ray box.
you wish for the mirrors. A. How did the incident ray compare with the ray that emerged
2. Use a ruler to draw a ray that strikes one of the mirrors. after the two reflections in your first trial? T/I
3. Use the laws of reflection to determine the angle of incidence. B. Did this result change for your second trial? T/I
Draw the reflected ray off this mirror. This ray will now act as C. Based on your observations, what is the main characteristic of
the incident ray striking the second mirror surface. a retro-reflector? T/I
Reflection and Dyslexia

People with dyslexia have difficulty reading print (Figure 7). Many people
who are dyslexic complain about the glare off white paper: there is too much
reflected light from the paper. The contrast between the white paper and
the black text makes reading difficult. For some people, this condition can
be helped by the use of coloured filters or glasses that reduce the glare of
reflected light from paper. This sometimes makes reading easier.
Figure 7 This is how text might appear
to a person with dyslexia.
UNIT TASK Bookmark

You can apply what you learned about optics in this section to the Unit Task described
on page 588.
In SUMMARY
• When light is reflected off a plane mirror, • When a light ray strikes a plane mirror, the
the angle of incidence equals the angle incident ray, the reflected ray, and the normal
of reflection. all lie on the same plane.
CHECK YOUR LEARnIng

1. Using a diagram, distinguish between the incident ray, 5. (a) What would be the angle of reflection for an angle of
the reflected ray, and the normal. K/U C incidence of 32°?
2. Clearly state the two laws of refl ection. K/U (b) What would be the angle of incidence for an angle of
reflection of 47°?
3. (a) What is the difference between specular reflection and
diffuse reflection? (c) What would the angle of reflection be if the incident ray
was 40° from the reflecting mirror surface? K/U
(b) Provide some examples of both specular and diffuse
reflection other than those given in this section. K/U A 6. Specular reflection and diffuse reflection are concepts that
can be applied to every room that you have ever been in.
4. (a) If you were painting the walls in your classroom,
Describe how these concepts can be applied to your kitchen,
would you want the walls to exhibit specular or diffuse
bathroom, and bedroom. A
reflection? Explain.
(b) Given your choice, should you use gloss or matte
paint? K/U A
TECH ConnEct OSSLT
Cleaning with Light

Imagine that you are a scientist who has been asked to clean a
painting or statue that has centuries of dirt and pollution on it.
Traditionally, you would do a delicate manual scraping with a
scalpel or use messy solvents that are harmful both to you and
to the environment. You have to be very slow and careful with
the cleaning because you do not want to make a mistake with a
priceless work of art!
Today, an alternative is available for restoring artifacts. A
modified version of the cosmetic surgery laser is used to heat the
dirt on the artifact. The energy in the laser light is absorbed by
the dirt, which expands as it is heated. The dirt then falls away
from the surface. It sounds almost too good to be true, and the
results can be astonishing (Figure 1). Best of all, no delicate,
time-consuming scraping with a scalpel is needed, and no toxic or
hazardous chemicals are used.
Lasers have many advantages in restoration work. Lasers
are accurate, the size and strength of the beam can be easily
controlled, they are reliable, there is no physical contact with the
surface, and no dangerous chemicals are used. Lasers can be
used on artifacts such as statues, pottery, and paintings (Figure 2).
Who would have thought that the laser, originally an invention in
search of a purpose, would be able to make light of cleaning?
Figure 1 The right half of this statue has been cleaned with a laser.
The left half shows what it looked like before cleaning.
(a) (b) (c)

Figure 2 (a)–(b) The various stages of restoration of a painting by Italian Renaissance painter Raphael (1483–1520). The painting had shattered
into 17 pieces due to a house collapse. (c) It took 10 years and the use of a UV laser to restore the painting to its original state.
NEL 487
11.7 Images in Plane Mirrors
You are standing in front of a mirror in the bathroom while brushing
your teeth. You notice that the writing on your T-shirt seems backwards.
READIng Tip
You have always wondered why the writing on the hood of a police car or
Using What You Know ambulance appears backwards. What exactly is going on here? Let’s begin by
If a question is posed in a paragraph,
stop reading immediately after the
doing the activity “Writing Reflectively.” Can you write a message that can
question. Continue reading only after be read in a mirror? Here is your chance to try!
you tried to answer the question.
T RY THIS WRITIng REFLECTIVELY

SKILLS HANDBOOK
SKILLS MENU: Questioning, Performing, Observing, Evaluating, Communicating 7.A.3.
Equipment and Materials: plane mirror; mirror supports A. Describe the appearance of your written name on the paper
(optional); a sheet of paper; pencil compared with its appearance in the mirror. T/I
1. Place the mirror on the upper half of the sheet of paper. You B. Was writing while looking into a mirror difficult? Why? Which
can use mirror supports or your hand to hold the mirror. letters did you find more difficult to do? T/I
2. While looking into the mirror, carefully print your name on the C. Did you fi nd it easier writing with one hand than with the
piece of paper so that it appears correctly in the mirror, not on other? If so, suggest a reason why. T/I
the page. You may have to practise a few times until you are D. From this activity, what general conclusion can you make
able to do this successfully. Also, try writing with the hand that about how an object and its image in a plane mirror are
you do not usually use. related? T/I
3. Once you are comfortable with writing using a mirror, use the E. Leonardo da Vinci was a left-handed Italian artist and
mirror to carefully print a short message. scientist born in the 15th century. He used mirror writing in
4. Exchange your message with a partner. Try to decipher the his notebooks when he was writing about his inventions
message that you have received from your partner. Check and other ideas (Figures 1 and 2). Why do you think he did
the accuracy of your translation of your partner’s message by this? T/I
using a mirror. GO TO NELSON SCIENCE
Figure 1 A section from one of Leonardo da Vinci’s notebooks Figure 2 The same section from Figure 1 now reflected in a mirror.
showing his backwards writing Note that the numbers are now readable.

Using Light Rays to Locate an Image
Light rays and the laws of reflection help determine how and where an
image is formed in a plane mirror. A light source radiates millions of light
rays in all directions, but you are only concerned with the rays that actually
strike the mirror and are reflected into your eyes. These rays are reflected off
the mirror, with the angle of incidence being equal to the angle of reflection.
To learn more about producing multiple images of an object in plane
mirrors, try the activity below.
T RY THIS PRODUCIng IMAgES, AnD MORE IMAgES, AnD MORE IMAgES …

SKILLS MENU: Predicting, Observing, Analyzing SKILLS HANDBOOK
3.B.
Equipment and Materials: two plane mirrors; two mirror A. How many images were visible when the mirrors were at
supports; ruler; protractor; a die; paper; pencil right angles to each other? T/I
1. Place the two mirrors at right angles to each other at the B. Use your knowledge of light rays to explain why this number
top of the sheet of paper. Place the die directly in front of of images was formed. K/U T/I
the right angle formed by the mirrors (Figure 3). Record how C. What was the angle between the mirrors for four images? T/I
many images you see in the mirrors. D. What was the angle between the mirrors for five images? T/I
E. Were your angle predictions correct for six, seven, eight, and
nine images? If not, explain why. T/I
F. What was the total number of images that you were able to
count? Why were you not able to exceed this value? T/I
G. A hall of mirrors in an amusement park seems to produce an
infinite number of images when you look into it. This effect is
also commonly seen in elevators that have two plane mirrors
on opposite walls (Figure 4). T/I C A
(a) Suggest a reason why elevator designers use this effect.
(b) On a piece of paper, draw two plane mirrors that are
parallel to each other. Add light rays to show how this
set-up can produce multiple images.
Figure 3
2. Gently move one of the mirrors, changing the angle between

the two mirrors, until you see four complete images. Draw
lines on the paper at the base of the two mirrors. Measure
and record the angle between them.
3. Now gently move one of the mirrors until you see five
images. Again, draw lines on the paper at the base of the two
mirrors. Measure and record the angle between them.
4. Based on your previous results, predict what angle between
the mirrors would produce six images, then seven, eight,
nine, and so on.
Figure 4 Multiple images produced by parallel plane mirrors
5. Continue moving the mirrors, counting the total number of
images, and measuring the angle between the mirrors as
long as you are able to.
NEL 11.7 Images in Plane Mirrors 489

DID YOU KNOW? From everyday experience, you know that light travels in a straight line.
Virtual Reality This belief is so strong that when your eyes detect reflected light from a
The word “virtual” in virtual reality plane mirror, your brain projects these light rays backwards in a straight
also refers to something that does line. This results in your brain thinking that there is a light source behind
not really exist, or something that is
the mirror and that this is where the light rays originate (Figure 5). It is this
imaginary.
apparent light source behind the mirror that results in you seeing an image
behind the mirror. There is, of course, no real light source behind the mirror
virtual image an image formed by light because the mirror is opaque. This kind of image is called a virtual image. A
coming from an apparent light source; virtual image is an image in which light does not actually arrive at or come
light is not arriving at or coming from the
actual image location
from the image location. The light only appears to come from the image
(Figure 6). Your eyes detect the light rays, but your brain determines where
the image is located. You will learn more about the eye in Chapter 13.
source apparent
source apparent
source
source
object virtual
image
Figure 5 Light rays and the laws of reflection can be used to explain Figure 6 Note that light rays behind the mirror are drawn as dashed
how the eye forms an image of the light source behind the opaque lines. This indicates that these rays do not really exist. Your brain
mirror. Note that only light rays that are reflected off the mirror and projects these rays behind the mirror and forms a virtual image
into your eyes contribute to the location of the apparent source. behind the mirror.
DID YOU KNOW? Using Equal Perpendicular Lines to

Playing With Light
A kaleidoscope is a toy that consists
Locate an Image
of three mirrors that reflect multiple You can use light rays and the laws of reflection to show how a plane mirror
images of an object. The mirrors produces a virtual image and where that is located. The use of light rays
are mounted in a tube at 60° to one also demonstrates another interesting property that allows you to locate
another, with the viewer looking in one
the image more directly. Consider again how light rays and the laws of
end and light coming in from the other Ontariorefl
Science
end through a screen. Many pleasing ection10 SBbe used to show how the human eye forms an apparent light
can
F18-UDOS10SB
hexagonal images are produced as
0-17-635528-6
source behind an opaque mirror (Figure 5). This time, however, draw a
F18-UDOS10SB FN C11-F19-UDOS10SB
n Moon the tube is rotated. The kaleidoscope line between the original object and the location of the image. This is the
n Moon was invented in England in 1816 by CO
ass object−image
Allanline.
MoonThere are two interesting observations to make about an
ass David Brewster. Pass object and its image in a plane mirror:
2nd pass
Approved
1. The distance from the object to the mirror is exactly the same as the
Not Approved
distance from the image to the mirror. In other words, the image
appears to be located the same distance behind the mirror as the object
is in front of the mirror.
2. The object−image line is perpendicular to the mirror surface.

Both observations can be stated like this: A plane mirror divides the
object−image line in half and is perpendicular to that line (Figure 7). The
use of equal perpendicular lines allows you to easily locate the image of an
object. All you need to do is pick several points on the object and then use the
object−image lines and the mirror to locate the image. When you have enough
points, you can draw the virtual image (Figure 8). This method does not require
you to draw light rays or to measure any angles of incidence and reflection.
object image
object image
Figure 8 By choosing enough points on an object and drawing

a series of object–image lines and lines of equal length that are
perpendicular to the mirror, you can accurately locate the virtual
Figure 7 A plane mirror divides the object-image line in half and
image of the object. Note that the image is drawn with dashed
is perpendicular to that line. This method can be used to locate the
lines to indicate that it is a virtual image.
image of an object without using light rays.
Characteristics of an Image in a Plane Mirror

There is another interesting property of images formed in plane mirrors.
The image in a plane mirror is upright but flipped horizontally compared to
the object. If you look at more than one letter in a plane mirror, such as the
word SCIENCE (Figure 9), youOntario
will Science 10 SB
notice that the order of the letters is also lateral inversion the orientation of an
0-17-635528-6
reversed. In other words, each letter is flipped horizontally and the letters image in a plane mirror that is backwards
10 SB FN C11-F21-UDOS10SB
are in reverse order. This property is called lateral inversion (Figure 10). and in reverse order
CO Allan Moon
C11-F20-UDOS10SB Pass 3rd pass
Allan Moon Approved
2nd pass Not Approved
SCIENCE ECNEICS
Figure 9 How the image of a word

appears in a plane mirror Figure 10 The writing on the hood of an ambulance is laterally inverted.
NEL 11.7 Images in Plane Mirrors 491

DID YOU KNOW? The Acronym SALT
Saving Money With Mirrors When you describe the properties of an image, you need to examine four
The use of large plane mirrors in characteristics:
interior designs and movie productions
1. size of image (compared to the object: same size, smaller, or larger)
saves money. The mirrors are placed
appropriately so that a corridor seems 2. attitude of image (which way the image is oriented compared to the
twice as long, when, in reality, it is object: upright or inverted)
just a reflection of a shorter corridor in
front. Science fiction movies often use 3. location of image
this technique when filming images of 4. type of image (real or virtual) A real image is an image formed when
futuristic machinery stretching off into light is actually arriving at the image location. You will learn more
the distance.
To learn more about the work of
about real images in Section 11.9.
interior designers and how they Use the acronym SALT, for Size, Attitude, Location, and Type, to
use mirrors,
remember these four image characteristics (Figure 11).
An image in a plane mirror is always the same size as the object (Size),
upright but laterally inverted (Attitude), behind the mirror (Location: the
same distance behind as the object is in front), and virtual (Type).
object
Size Attitude Location Type
Image or or or or
smaller ?
same upright inverted object virtual real
larger image
Figure 11
UNIT TASK Bookmark

Think about how you can use ray diagrams and the laws of reflection as you work on the
Unit Task described on page 588.
C11-F50-UDOS10SB.ai
In SUMMARY
• When reflected light off a plane mirror enters • A plane mirror divides the object−image line in
your eyes, your brain projects these rays half and is perpendicular to that line.
backwards to form an apparent light source • The acronym SALT (for Size, Attitude, Location,
located behind the mirror. and Type) can be used to remember the four
0-17-635528-6
• A virtual image
FN is formed by the apparent light
C11-F50-UDOS10SB image characteristics.
COsource becauseCrowleArt
no light Group
rays are actually arriving • An image in a plane mirror is always the same
at or coming from
Deborah Crowle location.
the image size as the object, virtual (behind the mirror),
Pass 3rd pass upright, and laterally inverted.
Approved
Not Approved

CHECK YOUR LEARnIng
1. In your own words, describe what is meant by the term 9. Your parents have bought a new mirror for your bedroom.
“virtual image.” K/U At first, you are dismayed because the mirror is only half
2. You stand 1.8 m in front of a plane mirror as you your height and you do not think that you will be able to
are brushing your teeth. Use SALT to describe the see an image of your entire body. You immediately notice,
characteristics of the image. K/U however, that the mirror does allow you to see your entire
body. Copy Figure 14 into your notebook and use light rays
3. You are wearing a T-shirt that has the word “OPTICS”
to show that you really can see your feet in the mirror the
on it. You stand in front of a plane mirror. Write in your
way it is set up. T/I C
notebook how this word appears to you as you look in the
mirror. K/U
4. Copy Figure 12 into your notebook. Use a ruler and a
protractor to draw normals and reflected rays for the two
incident rays. Then project these reflected rays to locate
the apparent source behind the mirror. (Refer to Figure 5
in this section for help with this.) Verify your answer using
an object−image line and lines of equal length that are
perpendicular to the mirror. T/I C
source
Figure 12
5. Copy all three parts of Figure 13 into your notebook,
leaving plenty of space around each part. Draw
object−image lines and lines of equal length that are
perpendicular to the mirror to determine the image of
each object. Use SALT to describe the characteristics of
each image. T/I C
K L
A K K L L
A A
Figure 14
(a)
(a) (b) (b) (c) (c) 10. Brainstorm to create a list of effects interior designers
(a) Figure 13
(a) (b) (b) (c) (c) might create using mirrors. Explain each effect using what
6. (a) What does the acronym SALT stand for? you have learned about light and reflection. K/U A
(b) In your own words, write a brief explanation of each of 11. A periscope is a device that is used to see around corners,
10 SB these four terms. K/U over a wall, or above water. Simple periscopes contain two
plane mirrors.
7. Emergency vehicles make use of lateral inversion when
C11-F23-UDOS10SB painting words and pictures on the hoods. Why do you (a) Predict how these mirrors are arranged.
Allan Moon think this is so? Write a brief explanation, including (b) DrawC11-F25-UDOS10SB.ai
a diagram to illustrate how such a periscope
Final art examples of how this is used in your community. K/U A would work. T/I C
8. Explain how the backwards writing in a mirror in the 12. Were you surprised to learn that your brain can be
UDOS10SB
activity “Writing Reflectively” demonstrates the properties “fooled” into thinking that an apparent source (virtual
0-17-635528-6
of an image in a plane mirror. K/U A image) can be located behind an opaque plane mirror?
Illustrator
Joel and aSharon
Discuss this with partner.Harris
C

NEL Company Nesbitt Graphics 11.7 Images in Plane Mirrors 493
Creative
Locating Images in a Plane Mirror SKILLS MENU

You use plane mirrors every day. In this activity, you will examine the Hypothesizing Observing
image in a plane mirror using the four characteristics: size, attitude, Planning Evaluating
location, and type. Controlling Variables Communicating
Testable Question plane mirror

What are the characteristics of the image in a plane
mirror?
SKILLS HANDBOOK
Hypothesis/Prediction 3.B.
Predict the size, attitude, location, and type of

image that will be produced. Give reasons for your O1
hypothesis. (object 1)
O2
Experimental Design ray box (object 2)
You will use a ray box to test your predictions
regarding the characteristics of an image in a plane
mirror.
Figure 1
Equipment and Materials 4. Use the ray box to send a ray through O1 that is
• ray box reflected off the mirror. Use your pencil to mark
• plane mirror and mirror supports at least three points on the incident ray and at
least three points on the reflected ray. Use your
• pencil and ruler
ruler to connect the points and draw both the
• sheet of paper C11-F26-UDOS10SB.ai
incident and reflected rays on the paper.
When unplugging the ray box, do not pull the electric cord. 5. Send a second ray through the arrow head, O1,
Pull the plug itself. but in a different direction. Repeat the procedure
in step 4 to trace the incident and reflected rays
SKILLS HANDBOOK
Procedure 1.B. on the paper.

1. Draw a horizontal line across the centre of the 6. Send two different light rays through the arrow
sheet of paper. tail, O2, and trace the incident and reflected rays.
Ontario Science 10 SB 7. Remove the mirror and, using dashed lines,
2. Mount a plane mirror on this line. Remember to
0-17-635528-6 extend the two reflected rays from O1 back
place the back of the mirror on the line.
FN C11-F26-UDOS10SBbehind the mirror to where they intersect. Label
3. Draw an arrow in front CO
of the mirror that is at
CrowleArt Group the point where they intersect behind the mirror
an angle to the mirror. Place a small circle over
Deborah Crowle as I1.
the arrow head and label it O1. Place a small
Pass 1st pass
circle over the tail of the arrow and label it O2 8. Repeat step 7 for the two reflected rays from O2
Approved to locate I2.
(Figure 1).
Not Approved
9. Use the locations of I1 and I2 to sketch the image
behind the mirror using a dashed line (----).

Table 1 Observations
Arrow head (O1) Arrow tail (O2)
length object−mirror
image−mirror
angle object−mirror
image−mirror
10. Draw a line from O1 to I1. Measure the length of Apply and Extend
this line from the object to the mirror and from (i) What is a simple way to locate the image in a
the image to the mirror. Measure the angle that plane mirror without using light rays? T/I
these lines make with the mirror. Record your

(j) Use this method to locate the images of the
results in a table in your notebook similar to
objects in Figure 2 by tracing them into your
Table 1.
11. Repeat step 10 for the line from O2 to I2. Record
T
notebook. C
your results in your table. TT Z

(e)
(a) How did the size (length) of the image compare (a) (e)
(e)
to the original object? Measure the object and 7
(a) (b) (c)
the image with a ruler. T/I
(b) Describe the attitude of the image compared to

Z
7
the original object. C
(c) How does the object−mirror distance compare (f)

with the image−mirror distance in a plane
mirror? T/I
(b) (f)
(f)
(a) (b) (c)
(d) What angle is formed between the mirror and the
object–image line? T/I
(e) What type of image is formed by a plane mirror? Z

How do you know? T/I
(g)
(f) Answer the Testable Question at the beginning
of this investigation. K/U
(c) (g)
(g)
(g) Was your prediction correct?
(a) Why or why (b) (c)
not? T/I
(h) Was your equipment adequate to allow you to

answer the Testable Question? Explain.
R
T/I
R
(d)
(d)
Figure 2 (d)
(d)
C11-F43-UDOS10SB.ai
C11-F43-UDOS10SB.ai
C11-F43-UDOS10SB.ai
NEL Ontario Science 10 SB 11.8 Conduct an Investigation 495
0-17-635528-6
11.9 Images in Curved Mirrors
Every time you use a flashlight or a makeup mirror, or look into a security
concave (converging) mirror a mirror mirror at a store, you are using a curved mirror. Curved mirrors are created
shaped like part of the surface of a sphere when you make part of the surface of a sphere reflective. If the reflection is
in which the inner surface is reflective from the inner surface of the sphere, the mirror is concave. The centre of a
convex (diverging) mirror a mirror concave mirror bulges away from you. In a convex mirror, the reflection is
shaped like part of the surface of a sphere from the outer surface of the sphere. The centre of a convex mirror bulges
in which the outer surface is reflective toward you (Figure 1).
The Terminology of Concave Mirrors

Concave and convex mirrors are described using similar terms. The centre of
centre of curvature the centre of the curvature of a mirror is the centre of the sphere, part of whose surface forms
sphere whose surface has been used to the curved mirror. It is labelled as C. The principal axis of the mirror is the
make the mirror
line going through the centre of curvature and the centre of the mirror. Figure
principal axis the line through the centre 2 shows the side view of a concave mirror. Notice that, in two dimensions, the
of curvature to the midpoint of the mirror mirror forms part of a circle. Because the principal axis goes through the centre
vertex the point where the principal axis of the circle, this axis is a radius of the circle. This means that the principal axis
meets the mirror intersects the mirror at 90° and is normal to the surface. The vertex is the point
where the principal axis intersects the mirror. It is labelled as V.
READIng Tip concave convex

mirror mirror
Relate It to Yourself
Relate what you have just read about centre
curved mirrors to your own personal of curvature
life. Think of examples of concave (C ) vertex (V )
centre of principal axis
and convex mirrors that you either sphere
personally use or are familiar with.
Figure 1 If you make part of the inner Figure 2 The side view of a concave mirror
surface of a sphere reflective, you get a
concave mirror. If you make part of the outer
surface reflective, you get a convex mirror.
Any light rays that are parallel to the principal axis will be reflected off
the mirror through a single point. This point, where parallel light rays
converge to meet at a common point come together, or converge, is called the focus. It is labelled as F (Figure 3).
focus the point at which light rays parallel Because a concave mirror focuses parallel rays at F, this type of mirror is
to the principal axis converge when they also called C11-F28-UDOS10SB.ai
a converging mirror (Figure 4).
are reflected off a concave mirror C11-F29-UDOS10SB.ai
Ontario
C Science 10 SBfocus (F ) V
0-17-635528-6
Figure 3 The focus is the point FN C11-F29-UDOS10SB
where all incident rays that are CO CrowleArt Group
parallel to the principal axis
convergeScience
when they Deborah Crowle
Ontario 10are
SBreflected Figure 4 A concave mirror showing the
off the mirror surface. Pass 1st pass convergence of parallel light rays
0-17-635528-6
Approved
FN C11-F28-UDOS10SB
496 Chapter 11 • The Production andApproved
Not Reflection of Light NEL
CO CrowleArt Group
How to Locate the Image in a Converging
(Concave) Mirror
To determine the image of an object in front of a concave mirror, you need
to draw at least two incident rays from the top of the object. These rays
will be reflected off the mirror and may or may not cross to form an image.
Figure 5 shows several rules that you can use to draw the incident and
reflected rays.
1 A light ray parallel to the principal axis is reflected through the focus.
1 A light
Thisray parallel
is how the to the principal
focus is defined.axis is reflected through the focus.
This is how the focus is defined.
2 A light ray through the centre of curvature is reflected back onto
1 2 A light rayThis
itself. through the centre
rule makes sense of because
curvatureany is reflected
line through backthe
onto
centre of
1 itself. This rule
curvature is makes
a radiussense
of thebecause any linebythrough
circle formed the centre
the mirror. A radius of is
curvature
always isata90° radius of mirror.
to the the circle formed
A ray alongbythe
thenormal
mirror.hasA radius
an angleis of
2 always at 90°ofto0°.
incidence theThis
mirror. A ray
means along
that the normal
the angle has an is
of reflection angle
alsoof0°. The
2 incidence of ray
0°. will
Thisreturn
meansback thatonthethe
angle of path.
reflection is also 0°. The
reflected same
C F V reflected ray will return back on the same path.
3 A ray through F will reflect parallel to the principal axis. This rule uses
C F V
3 A ray
thethrough
fact thatF thewillangle
reflectofparallel
incidence to the principal
is always axis.toThis
equal rule uses
the angle of
the reflection.
fact that the Even angle of incidence
if you switch theisincident
always equal to the angle
and reflected rays,ofthe light
reflection.
will stillEven
follow if you switchpath;
the same the incident
only the and reflected
direction will rays, the This
change. light
3
3 willprinciple
still follow the same
is called the path; only theofdirection
reversibility light. will change. This
principle is called the reversibility of light.
4 A ray aimed at the vertex will follow the law of reflection. Because the
4 4 A ray aimed axis
principal at theisvertex will follow
perpendicular to the law of reflection.
surface Because
of the mirror, the
the angle
4 principal axis is can
of incidence perpendicular to the surface of the mirror, the angle
be easily measured.
Figure 5 Imaging rules for a concave mirror of incidence can be easily measured.
You can use the imaging rules for a concave mirror to find the DID YOU KNOW?
characteristics of images at a variety of object locations (Figure 6). From a Sphere to a Parabola
- smaller Concave mirrors were originally
--- smaller
smaller
inverted developed from a spherical surface. But
--- inverted
inverted
between C & F parallel rays reflecting off a spherical
--- between
between
real C
C&& FF
C F surface do not all go through a single
-- real
real C FF
C point. This effect is called spherical
aberration. Slightly modifying the shape
to a parabolic one corrects this problem.
Now parallel rays do, in fact, converge
(a) at a focus. Parabolic solar collectors,
C11-F31-UDOS10SB.ai for example, are used in many solar
- same size
Ontario Science 10 SB C11-F31-UDOS10SB.ai power plants to increase the intensity of
--- inverted
Ontario
same size
sameScience
size 10 SB sunlight shining at the focus.
0-17-635528-6
--- at
inverted
inverted
C
0-17-635528-6
FN--- real
at
at C
C C11-F31-UDOS10SB
C F
FNCO -- real
real C
C11-F31-UDOS10SB
C FF
CrowleArt Group
CO CrowleArt
DeborahGroup
Crowle
Deborah Crowle
1st pass
Pass
Pass (b) 1st pass
Approved
Approved
Not Approved
Not ---Approved
larger
larger
larger
- inverted
--- inverted
invertedC
outside
--- outside
outside C
real C Figure 6 A converging (concave) mirror
-- real C F
real C
C FF produces a real image at these three
object locations. The characteristics of
each image are shown. (An explanation of
(c) a “real image” is given on the next page.)
NEL 11.9 Images in Curved Mirrors 497

READIng Tip Images in a Converging Mirror
Take Time With Diagrams If you place a luminous source at a distance greater than C, you can locate an
Examine diagrams carefully. Take time
image of this source by moving a paper screen back and forth in front of the
to understand each part of a diagram.
When you have a proper understanding mirror. The image is smaller, inverted, and somewhere between C and F. In
of diagrams, it will help you understand this case, light is actually arriving at the image location. This type of image is
concepts and applications. called a real image. Any image that can be formed on a screen is a real image
because light rays are actually arriving at the image location.
real image an image that can be seen on
a screen as a result of light rays actually When an object is beyond C, at C, or between C and F, the reflected rays
arriving at the image location actually meet in front of the mirror, forming an inverted, real image each time.
Many devices make use of the properties of concave mirrors. A car
headlight, a flashlight, and a searchlight all use concave mirrors. In a
searchlight, the light source (the filament) is at the focus, and the reflected
rays form a parallel beam (Figure 7). Car headlights and most flashlights are
designed in a similar way, except that the filament is slightly inside the focus
so that the reflected rays spread slightly apart and illuminate a greater area.
F
V
DID YOU KNOW? (a) (b)

Costly Error Figure 7 A searchlight radiates light rays from the focus (F ) so that the reflected rays are parallel.
The Hubble space telescope is an
important and expensive instrument
used for astronomy. This $2.5 billion The reverse of the searchlight application occurs when a concave mirror is
telescope was launched in 1990. used in a reflecting telescope. In this situation, parallel light rays are focused
There had been a small error in the
to a sharp image after reflecting off the concave mirror in the telescope. A
grinding of Hubble’s concave mirror.
This 0.0023 mm error (about ––
1 parabolic solar cooker operates in a similar way. Parallel rays from the Sun
50 th
the thickness of a human hair) resulted converge at the focus where a pot is located. The energy absorbed at the focus
C11-F33-UDOS10SB.ai
in Hubble producing fuzzy images in a solar cooker can heat water to boiling. Radio telescopes and satellite
(left). The error was corrected in a dishes are devices that also cause parallel rays to converge. The difference
shuttle servicing mission in 1993,
and astronomers around the world
here is that electromagnetic waves other than visible light are used (Figure 8).
breathed a huge sigh of relief. Since These other kinds of electromagnetic waves act just like parallel light rays;
that time, Hubble has produced they converge at the focus of a concave mirror.
stunning, razor-sharp images of
distant celestial objects (right).
C
F
0-17-635528-6
V
FN C11-F33-UDOS10SB
CO To learn more about how theGroup
CrowleArt (a) (b)
mirror of the Hubble space
telescope wasDeborah
repaired, Crowle Figure 8 A TV satellite dish receives parallel rays and refl ects them to the focus (F ) where
Pass GO TO NELSON1st passSCIENCE a detector is located.
Approved
Not498
Approved
Chapter 11 • The Production and Reflection of Light NEL
No real image is produced when an object is located at F in front of a WRITIng Tip
concave mirror. The reflected rays are parallel and do not intersect to form Using Signal Words
an image (Figure 9). If you extend the rays behind the mirror using dashed When writing, use signal words
lines, you cannot even see a virtual image. such as “moreover” and “also” to
show similarities between ideas. Use
“however” and “although” to indicate
no clear image formed differences between ideas. Use “for
(reflected rays are parallel) instance” to signal examples, and
“therefore” to indicate a conclusion.
C F
Figure 9 No image is formed when the object is at F because the reflected rays are parallel.
No real image is produced when an object is between F and the concave

mirror. The reflected rays spread apart, or diverge (Figure 10). The human diverge to spread apart
brain, however, extrapolates the diverging rays backwards to where they
appear to originate, which in this case is behind the mirror. This results in a
virtual image because the concave mirror is opaque. These extrapolated rays
cannot actually come from behind the mirror.
C11-F35-UDOS10SB.ai
- behind the mirror
- larger
- upright
- virtual
C F
io Science 10 SB
635528-6
Figure 10 A virtual image behind a concave mirror is formed when an object is between F and
C11-F35-UDOS10SB
the mirror.
CrowleArt Group
A virtual
Deborah image behind a concave mirror is always larger and upright. A
Crowle
1stshaving
pass mirror and a makeup mirror are two common examples that make
oved use of this property (Figure 11).
pproved Table 1 summarizes the image characteristics in a converging (concave)
mirror.
Table 1 The Imaging Properties of a Converging Mirror
OBJECT IMAGE
Location Size Attitude Location Type
beyond C smaller inverted between C and F real

at C same size inverted at C real
io Science 10 SB
between C and F larger inverted beyond C real
635528-6
at F -UDOS10SB
C11-F36 no clear image Figure 11 The large virtual image
Allan Moon behind the concave mirror allows
inside F larger upright behind mirror virtual
makeup to be put on more easily.
Final art
oved
pproved

How to Locate the Image in a Diverging
(Convex) Mirror
The parts of a convex mirror and the imaging rules for a convex mirror are
similar to those for a concave mirror. The difference is that F (now called
a virtual focus) and C are behind the mirror and light rays seem to come
from an apparent light source behind the mirror (Figure 12).
1 A ray parallel to the principal

1 axis is reflected as if it had
come through the focus (F ).
2
2 A ray aimed at the centre of
curvature (C) is reflected
V F C back upon itself.
3 A ray aimed at the focus (F )
is reflected parallel to the
principal axis.
Figure 12 Imaging rules for a convex 3
mirror
Images in a Diverging Mirror

The rays reflected off a convex mirror always diverge. For this reason, a
convex mirror is also called a diverging mirror. Reflected rays from an object
never cross in front of the mirror to form a real image. The human brain,
again, extrapolates these rays behind the mirror to where they appear to
converge. This results in the diverging (convex) mirror producing a smaller,
C11-F37-UDOS10SB.ai
upright, virtual image. This property makes convex mirrors very useful as
security mirrors in stores (Figure 13). Convex mirrors show a wide range of
view with their smaller virtual image. Convex mirrors are also used as the
side-view mirror on vehicles. “Objects in mirror are closer than they appear”
For computer simulations
involving curved mirrors, is frequently printed at the bottom of side-view mirrors to remind viewers
GO TO NELSON SCIENCE that they are seeing a smaller image.
0-17-635528-6
FN C11-F37-UDOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 1st pass
Approved
Not Approved
V F
(a) (b)
Figure 13 (a) A convex mirror always produces a smaller virtual image. (b) A security mirror in a
store illustrates this property.
500 Chapter 11 • The Production and Reflection of Light

C11-F38-UDOS10SB.ai NEL
UNIT TASK Bookmark WRITIng Tip
You can apply what you learned about optics in this section to the Unit Task described
Conclude by connecting the main idea
on page 588.
and key points. For example, for a
persuasive text on images in a
converging mirror, you might conclude
by saying that a converging mirror
produces an inverted, real image if the
object is beyond F.
In SUMMARY
• A converging (concave) mirror has its focus on • At least two incident rays are drawn to determine
the same side as the object; a diverging (convex) whether or not an image is formed and, if so, its
mirror has its focus behind the mirror. characteristics. These rays usually originate from
• A light ray that is parallel to the principal axis the top of the object.
of a curved mirror is reflected through the focus • A converging (concave) mirror produces an
(F); if the mirror is diverging (convex), parallel inverted, real image if the object is beyond F; if the
rays are reflected away from the virtual focus, object is at F, no image is formed; and if the object
which is behind the mirror. is between F and the mirror, a larger, upright,
virtual image is formed.
• A diverging (convex) mirror always produces a
smaller, upright, virtual image.
CHECK YOUR LEARnIng

1. List examples of how concave or convex mirrors might be 8. Copy Figure 15 into your notebook. Locate the image for
used at your school. A each object and state its characteristics. T/I C
2. Describe the difference between a real image and a virtual
image. K/U
3. Use a diagram to show how to locate the focus in a (a)
F C
concave mirror. K/U C (a)
4. In your own words, state the imaging rules for concave
mirrors. K/U
5. You are looking at your image in a makeup or shaving (b)
mirror. Where is your head located with respect to the C F
(b)
focus (F )? T/I
6. Why will a diverging (convex) mirror never produce a real
image? Include a diagram in your explanation. K/U C
7. Examine the image formed by the mirror in Figure 14. (c)
C F
(a) What kind of mirror is this? (c)
(b) Where is this image located? Figure 15
(c) What type of image is it? K/U
9. What is the relationship between the type and the attitude
of an image? K/U
10. (a) Why are convex mirrors placed on sharp turns in
C11-F39-UDOS10SB.ai
parking garages?
(b) State other uses for convex mirrors. A
Figure 14
Locating Images in Curved Mirrors SKILLS MENU

Curved mirrors are all around you. These mirrors are found in makeup Hypothesizing Observing
mirrors, in flashlights, on cars, and as security mirrors in many stores. Planning Evaluating
In this investigation, you will examine the imaging properties of Controlling Variables Communicating
curved mirrors.
Testable Question 3. Find the focus, F, of the mirror. To do this, select

What are the characteristics (size, attitude, location, a relatively distant object (such as the open slats of
and type) of the images in a converging (concave) window blinds) that is visible when the lights have
mirror and in a diverging (convex) mirror? been turned off. Make sure that you are as far
away from this distant object as possible. Aim the
SKILLS HANDBOOK
metre stick−mirror assembly at the distant object,
Hypothesis/Prediction 3.B.
which should be reflected in the mirror. Move
Use your understanding of the properties of light to the sheet of paper back and forth in front of the
write a hypothesis predicting the characteristics of mirror until you see an image of the distant object
images in converging and diverging mirrors. on the paper. Adjust the paper to get the image
as sharp as possible. (Do not completely cover
Experimental Design the mirror with the paper.) The distance from the
You will use a candle to test your predictions paper to the mirror gives the position of the focus.
regarding the characteristics of images in converging Mark F on the ruler with the chalk.
and diverging mirrors. 4. The centre of curvature (C) is located at a
distance that is twice the distance from the
Equipment and Materials mirror to F. For example, if F is 30 cm, C would
• converging mirror be 60 cm from the mirror. Mark C on the ruler
• diverging mirror with the chalk.
• mirror support
• metre stick with two supports Part B: Locating Images in the Mirrors
• candle with holder 5. Prepare a table similar to Table 1 in which to
• paper screen record your observations.
• chalk that can be easily erased
Table 1 Observations of Candle Images
Procedure
SKILLS HANDBOOK
1.B. Object Size of Attitude Location Type of
location image of image of image image
Part A: Locating F and C beyond C
1. Place the two stick supports under the ends of at C
the metre stick. between C and F
2. Place the converging mirror in the mirror at F
support and place this assembly near the end of inside F
the metre stick.

6. Place a lit candle beyond C, as shown in Figure 1. Analyze and Evaluate
Move the paper screen back and forth to locate a (a) What type of image(s) does a converging
focused real image. Record the characteristics of mirror produce? T/I
each image (size, attitude, location, and type) in

(b) Where must an object be located for a
your table. Use C and F as reference points when
converging mirror to produce a real image? T/I
describing the image location.
(c) What happens to the size of the real image
When using a candle, tie back long hair and loose clothing.
as the object is slowly moved from its original
Place a piece of paper under the candle to catch any falling
wax. Be careful when moving the candle—the wax is hot.
position beyond C toward F? T/I
(d) What is the only location where a converging

mirror will not produce an image? T/I
converging
(e) Where must an object be located for a
(concave) mirror converging mirror to produce a virtual
object image? T/I
paper screen
(f) When you used the diverging mirror, why
did you not have to follow a procedure similar
metre stick
to that used for the converging mirror? T/I
(g) Answer the Testable Question at the

Figure 1
beginning of this investigation. K/U
7. Next, place a lit candle at C. Again, move (h) Was your prediction correct? Why or
the screen to find the image and record its why not? T/I
characteristics.
8. Repeat step 7 with the candle at three other
positions:
Apply and Extend
(i) What kind of mirror is used as a security mirror
• between C and F
in almost all stores? What image characteristics
• at F
make this mirror so useful? A
• between F and the mirror

(j) Flashlights and car headlights all have
Note that you may need assistance from your
converging mirrors. Why would it not be a good
teacher for the last two object locations: at F and
idea to use a diverging mirror instead? A
between F and the mirror.

(k) Early settlers often placed a diverging reflective
9. Being careful of the candle flame, replace the
surface behind oil lamps that were mounted on
converging mirror with a diverging one. Attempt
walls. What was the purpose of this mirror? Why
to find an image on the paper screen. Record
was a converging mirror not used instead? A
your observations.
(l) A converging mirror has a focus 12 cm from the
10. Now, look into the convex mirror and locate the
mirror. Predict the characteristics of the image
image of the candle. Observe and record the
produced if a candle is placed: T/I C
image characteristics.
• 30 cm from the mirror
11. Move the candle back and forth. Observe and
record any changes in the image. • 18 cm from the mirror
• 9 cm from the mirror
Check your predictions by using ray diagrams.

CHAPTER
LOOKING BACK
11
Optical devices benefit our Light is produced by natural Light is an electromagnetic

society in many ways. and artificial sources. wave that travels at high
speed in a straight line.
• Plane mirrors are widely used for • Incandescence is light emitted when
personal hygiene and grooming. a material has been heated. (11.2) • Electromagnetic waves travel at
(11.4) • Light from an electric discharge the speed of light in a vacuum
• Converging mirrors are used in car is caused by passing an electric and do not require a medium for
headlights, searchlights, reflecting current through a gas. (11.2) transmission. (11.1)
telescopes, solar cookers, and • Phosphorescence and fl uorescence • The electromagnetic spectrum
shaving and makeup mirrors. (11.9) are both caused by a material consists of light with a variety of
• Some examples of diverging mirrors absorbing ultraviolet light. (11.2) energies: radio waves (least energy),
are side-view mirrors on cars and • Chemiluminescence and microwaves, infrared light, visible
security mirrors in stores. (11.9) bioluminescence are the light, ultraviolet light, X-rays, and
production of light from a chemical gamma rays (most energy). (11.1)
reaction without an increase in • White light is composed of a
temperature. (11.2) continuous spectrum of colours.
• Triboluminescence is light produced (11.1)
from friction with crystals. (11.2)
When light is reflected off a Images in flat mirrors are Curved mirrors produce a
flat, shiny surface, the image located at the point where variety of images.
is equal in size to the object the backward extensions of
• At least two incident rays from an
and the same distance from reflected rays intersect.
object are needed to determine
the surface.
• A plane mirror divides the whether or not an image is formed
• Light rays are used to represent the object−image line in half and and, if so, its characteristics.
direction in which light is travelling. is perpendicular to that line. (11.7) (11.7, 11.9)
(11.4) • The four image characteristics are • A converging (concave) mirror
• When light is refl ected off a plane Size, Attitude, Location, and Type produces an inverted, real image
mirror, the angle of incidence (SALT). (11.7) if the object is anywhere beyond
equals the angle of reflection. (11.6) • An image in a plane mirror is F ; if the object is at F, no image is
• When a light ray strikes a plane always the same size as the object, formed; and if the object is between
mirror, the incident ray, the reflected virtual (behind the mirror), upright, F and the mirror, a larger, upright,
ray, and the normal all lie in the and laterally inverted. (11.7) virtual image is formed. (11.9)
same plane. (11.6) • A diverging (convex) mirror always
produces a smaller, upright, virtual
image. (11.9)

THINK NOW? electromagnetic wave (p. 464)
visible light (p. 465)
You thought about the following statements at the beginning of electromagnetic spectrum
the chapter. You may have encountered these ideas in school, (p. 465)
at home, or in the world around you. Consider them again and luminous (p. 470)
decide whether you agree or disagree with each one. non-luminous (p. 470)
light ray (p. 479)
transparent (p. 479)
translucent (p. 479)
opaque (p. 479)
incident ray (p. 481)
reflected ray (p. 481)
normal (p. 481)
water’s surface perpendicular (p. 481)
angle of incidence (p. 481)
angle of reflection (p. 481)
1 This diagram accurately shows light
reflecting off the surface of very still
4 This diagram accurately shows
how an image appears in a makeup
C11-F02-UDOS10SB.ai virtual image (p. 490)
water. mirror. lateral inversion (p. 491)
Agree/disagree? Agree/disagree? concave (converging) mirror
Illustrator (p. 496)
Joel and Sharon Harris convex (diverging) mirror
(p. 496)
laser centre of curvature (p. 496)
principal axis (p. 496)
vertex (p. 496)
converge (p. 496)
focus (p. 496)
real image (p. 498)
2 This diagram accurately shows a laser
beam reflecting off a curved mirror.
5 Microwaves
of light.
travel at the speed
diverge (p. 499)
UDOS10SB
0-17-635528-6

Creative
Pass 4th Pass (final)
Approved
Not Approved
BiG ideas
✓ Light has characteristics
3 Aorder
full-length mirror is necessary in
for you to see your whole body
6 Aradiates
luminous object such as a candle
light in all directions.
be manipulated with
in reflection. Agree/disagree?
range of uses.
Agree/disagree?
✓ Society has benefitted
How have your answers changed? from the development of
What new understanding do you have? a range of optical devices
and technologies.

CHAPTER
REVIEW
11
What Do You Remember? 10. Where must an object be located in order for a
concave mirror to form
1. In your notebook, match each item in column A
(a) a real image?
with the most appropriate phrase from
(b) a virtual image? (11.9) K/U
column B. (11.1, 11.2, 11.4, 11.9) K/U
Column A Column B
11. Classify each object as exhibiting specular or
luminous visible electromagnetic waves diffuse reflection. Justify each of your
transparent 90° to a surface answers. (11.6) K/U
white light produces its own light (a) dry asphalt

concave mirror from an apparent light source (b) a car windshield producing glare in your eyes
real image diverging mirror (c) a sweater
normal transmits all incident light (d) high-gloss paint
virtual image converging mirror
convex mirror seen on a screen 12. Copy and complete Table 1 for each initial
condition. (11.6) K/U T/I
2. What two properties do all electromagnetic waves Table 1 Ray Angles

have in common? (11.1) K/U
Angle of Angle of
3. Describe the characteristics of an image in a plane Initial condition incidence reflection
mirror. (11.7) K/U angle between the reflected ray and
the normal is 47°
4. In your own words, describe the two laws of angle between the incident ray and
the normal is 52°
reflection. (11.6) K/U
angle between the incident ray and

5. Briefly describe how light is produced by a plane mirror is 14°
the incident ray comes in along the
(a) phosphorescence normal
(b) electric discharge
(c) triboluminescence (11.2) K/U
13. Copy Figure 1 into your notebook. Use several
6. List these electromagnetic waves in order from object−image lines and lines of equal length that
lowest energy to highest energy: green light, are perpendicular to the mirror to determine the
microwaves, X-rays, ultraviolet light, infrared image characteristics for each object (11.9). T/ I C
light, red light, and radio waves. (11.1) K/U
F C
What Do You Understand? (a)
7. How will the word PHYSICS appear when viewed

in a plane mirror?(11.7) K/U
8. Why is the light ray concept a useful model to C F

(b)
use when determining the behaviour of light?
(11.4) T /I
9. Why will a convex mirror never form a real

C F
image? (11.9) K/U
(c)
Figure 1
C11-F39-UDOS10SB.ai
Solve a Problem Create and Evaluate
14. Your younger brother does not think that light 20. Compare and contrast incandescent lighting and
is a form of energy. Write a short script to fluorescent lighting in these categories:
show how you would convince him otherwise. (11.2) K/U A
(11.1) T /I C
(a) method of producing light
15. You walk into a darkened room and turn on (b) efficiency in producing light
a flashlight. You see an image of the flashlight (c) initial cost
reflecting off a plane mirror in front of you. (d) long-term cost
The image is 8.4 m away. How far away is the (e) environmental consequences
plane mirror? Explain. (11.7) K/U C
16. Copy Figure 2 into your notebook. Use light rays 21. In this chapter, you learned that images in a
to determine which of the object(s) would be mirror are either behind the mirror or visible in
visible by looking into the mirror from the eye front on a screen.
location. (11.7) T /I C
(a) Were you surprised to learn this? Explain.
object 1 (b) Many people think that the image in a plane
mirror is on the mirror surface. How would
you explain to them that it really is not there
object 2
but behind the mirror?
Web Connections
object 3
22. Research why the incandescent bulb was so
popular for so long. Express your opinion in two
paragraphs. (11.2) T/I A C
23. Figure 4 shows the world’s largest blast furnace

powered by the Sun. It is located in Odeillo,
France. (11.9) K/U T/I A
Figure 2
17. A photograph is covered with non-glare glass.

The surface of this glass is rougher than regular
glass. How would this feature contribute to it
being non-glare glass? (11.6) A
18. A concave mirror has a focus of 75 cm. An object

is placed 60 cm in front of the mirror. Describe
the image characteristics of this
Figure 4
object. (11.9) T /I C
rio Science 10 SB (a) What kind of mirror is built into the wall of
635528-6 19. Copy Figure 3 into your notebook. Use light rays to the building?
locate the focus (F) and the centre of curvature (C)
C11-F44-UDOS10SB (b) Where do you think the focus (that is, the site
of this mirror. (11.9) T /I C
Allan Moon of the blast furnace) of this large mirror is
1st pass object located?
oved (c) What are some advantages and disadvantages
Approved of using light as the energy source for this
blast furnace?
image
Figure 3 To do an online self-quiz and for

all Nelson Web Connections,

CHAPTER
SELF-QUIZ
11
For each question, select the best answer from the four 4. Which of these correctly shows how the word
alternatives. LIGHT would look when viewed in a plane
1. By which of these methods is light energy mirror? (11.7) K/U
transmitted? (11.1) (a)

K /U
THGI L
(a) radiation
(b) inversion (b) LIGHT
(c) conduction
(d) emission (c)
LIG H T
2. Which of these objects is considered luminous?
(11.2) K/U
(d) T H GIL
(a) a tree
Indicate whether each statement is TRUE or FALSE. If you
(b) a mirror
think the statement is false, rewrite it to make it true.
(c) a window
(d) a lit match 5. In order to see an object, light must come from
C11-F52A-UDOS10SB.ai
that object into your eyes. (11.2) K/U
3. Figure 1 shows a light bulb positioned in front

of a concave mirror. Which statement correctly 6. The four characteristics of an image in a mirror
C11-F52B-UDOS10SB.ai
describes the properties of the resulting image? are size, attitude, luminosity, and type. (11.7) K/ U
(11.9) K/U
C11-F52C-UDOS10SB.ai
in the C11-F52D-UDOS10SB.ai
blanks with a word or phrase that correctly completes
Ontario Science 10 SB the sentence.
0-17-635528-6 7. A _____________ mirror is a curved mirror
FN C11-F52A-UDOS10SB shaped like part of the outer surface of a sphere
CO CrowleArt Group in which the outer surface is reflective. (11.9) K/ U
0-17-635528-6
C F
Deborah Crowle
Ontario
FN
Pass
Science 10 SB
C11-F52B-UDOS10SB
Final art
8. The image of an object you see in a plane mirror
0-17-635528-6
CO CrowleArt Group is called a ____________ image. (11.7) K/U
Approved
Ontario
FN Science 10 SB
C11-F52C-UDOS10SB
Deborah Crowle
Not Approved
0-17-635528-6
CO
Pass CrowleArt
Final art Group Match each term on the left with the appropriate example on
Figure 1 FN C11-F52D-UDOS10SB
Approved Deborah Crowle the right.
CO
Pass
Not Approved CrowleArt Group
Final artvirtual 9. (a) incandescence (i) lightning
(a) The image will be an inverted, image
that isApproved
Deborah Crowle
smaller than the light bulb. (b) chemiluminescence (ii) fireflies
Pass Approved Final art
Not
(b) The image will be an inverted, real image (c) bioluminescence (iii) traditional light
that isApproved
the same size as the light bulb. (d) fluorescence bulbs
Not Approved
(c) The image will be an upright, virtual image (e) electric discharge (iv) glow sticks
that is largerC11-F51-UDOS10SB.ai
than the light bulb. (v) energy-efficient
(d) The image will be an upright, real image that light bulbs
is the same size as the light bulb. (11.2) K/U
B
F51-UDOS10SB
Write a short answer to each of these questions. 18. Consider the uses and properties of mirrors.
10. Describe two properties of light. (11.1) K/U
How could a mirror be useful to people in each
situation?
11. You have learned that light rays travel in a (a) a hiker in a wilderness area
straight line. Does this also mean that a light (b) a dentist examining teeth
ray cannot change direction? Why or why not? (c) a security guard in a store (11.9) T/ I
(11.4) K/U
19. Your friend shines a flashlight onto the open

12. Give at least two examples of convex mirrors palm of your hand. Would you expect the
other than those mentioned in the text. light reflected from your hand to be specular
(11.9) K/U A
reflection or diffuse reflection? Explain.
13. What property of radio waves allows you to send (11.6) T/I
and receive calls on a cell phone? Explain your 20. (a) What do you think the term “mirror image”
answer. (11.1) T /I A
means?
14. Name three types of electromagnetic waves and (b) Give an example of a mirror image. (11.7) T/ I
their uses that you might encounter in your daily

21. In this chapter, you learned the mnemonic
life. (11.1) A
ROY G. BIV to help you remember the order

15. Your family plans to buy new Christmas lights of the colours in the visible spectrum. Devise
this year. What two reasons would you give to a mnemonic to help you remember the
convince them to buy LED lights instead of seven types of electromagnetic waves in the
incandescent lights? (11.2) C electromagnetic spectrum in order, from those
with the lowest energy to those with the highest
16. Laser light has special properties. Use what you
energy. (11.1) C
know about the properties of lasers to answer
these questions. 22. Do you think it is false advertising when a
(a) Why does visible light from a laser have a company claims that a laundry detergent cleans
very pure colour? clothes better because the clothes become
(b) Why can some forms of laser light be used to brighter when washed? Justify your answer.
burn holes through steel? (11.3) K/U (11.2) T/I
17. (a) Give an example of a situation in which it 23. Your friend explains why light reflected off a
would be better to use a translucent material bumpy surface produces a fuzzy image. He says
instead of a transparent one. Explain your that a light ray striking a rough surface produces
answer. a reflected ray with an angle of reflection that is
(b) Give an example of a situation in which it not equal to the angle of incidence. What do you
would be better to use a transparent material think of your friend’s explanation? Explain your
instead of a translucent one. Explain your answer. (11.6) T/I
answer. (11.4) T /I A
24. Some restaurants cover an entire wall with a
large, plane mirror. What effect does this have on
the appearance of the restaurant? Why does this
happen? (11.7) K/U A

CHAPTER
12 The Refraction of Light
KEY QUESTION: How does light behave as it

travels from one medium into another?
Light travelling through different media can create unusual images.
510 Chapter 12 • The Refraction of Light NEL

UNIT E
Light and
Geometric Optics

and Reflection of Light Optical Devices
of Light
KEY CONCEPTS
Light changes direction Light bends toward the Total internal reflection
predictably as it travels normal when it slows down may occur when an
through different in a medium with a higher incident ray is aimed at a
transparent media. index of refraction. medium with a lower index
of refraction.
Many optical devices The refraction and Understanding the

make use of the refraction reflection of light can be behaviour of light is key to
and reflection of light. used to explain natural many careers.
phenomena.

ENGAGE IN
SCIENCE
The following conversation was recorded on July 21, 1969.

Armstrong: The top of that next little ridge there. Wouldn’t that be
a pretty good place?
Aldrin: All right. Should I put the LR-cubed right about here?
Armstrong: All right.
Aldrin: I’m going to have to get on the other side of this rock here.
Armstrong: I would go right around that crater to the left there. Isn’t
that a level spot there?
Aldrin: I think this right here is just as level.
There are two remarkable things about this conversation. The first is
that this conversation took place on the surface of the Moon in a location
called the Sea of Tranquility. It took place between two NASA astronauts
from the Apollo 11 mission: Neil Armstrong, who was the first human
on the Moon, and Edwin “Buzz” Aldrin, who was the second human on
the Moon. The second remarkable thing is that they were talking about
the placement of a special device called the “LR-cubed.”
The “LR-cubed” stands for Laser Ranging Retro-Reflector.
This amazing device was part of an experiment
that is still working today, decades after its
original installation. What exactly is the LR3
(LR-cubed), and how does it work? In a small
group, discuss what you think this device might
be. You will learn the answers in this chapter.

WHAT DO YOU
THINK?
air
water
1 This diagram accurately shows light passing from air into

water.
4 AAgree/disagree?
swimming pool is always deeper than it appears.
Agree/disagree?
air glass
2 Light can be both reflected and transmitted when it goes

from air into glass.
5 Inpartorder to see a rainbow, the Sun must be shining in one
of the sky while rain or clouds are in the opposite
Agree/disagree? part of the sky.
Agree/disagree?
3 Aaround
periscope is an optical device that allows you to see
corners.
6 When you see a mirage, you are really looking at an
image of the sky.

FOCUS ON
READING
Evaluating
When you evaluate a text, you apply your prior knowledge and analysis
of the content to make judgments about its ideas, information, and
reliability. Support your judgments with convincing reasons and specific
details or quotations from the text. Ask yourself the following questions
when evaluating texts:
• Does the main idea seem reasonable? Can I accept it?
READING TIP
• Is the information accurate and credible?
look for tips like this. They will help • Do I agree with the author’s point of view on the subject?
you develop literacy strategies. • Can I find clues about the text’s biases and the values it supports?
Hiding in Plain Sight—The Invisibility Cloak

Surprisingly, scientists are paying serious attention to the idea of some
kind of invisibility device. They recently demonstrated a device that
could bend microwaves around copper rings, in effect, “cloaking” the
copper rings. This means that if you subjected the device to microwaves,
you could not detect the rings (Figure 1). This result astounded
physicists around the world. Light is also an electromagnetic wave, just
Figure 1 These copper rings are like microwaves. Could this concept be applied to light?
“invisible” to microwaves.
Evaluating in Action
Evaluating is a high-level thinking process in which you question
the information in a text so as not to take it for granted. Here is how
one student used the strategies to evaluate the selection about the
invisibility cloak.
Questions I Asked Clues in the Text My Final Opinion/Judgment

of the Text
Is this idea reasonable? The technology is being In the future, an invisibility

developed and tested. device may exist.
Is the information It sounds credible but I would have to read about this
credible? no sources are given. from different sources before
I believed it.
Do I agree with the The author appears to The information is logically

author’s point of view? support this device. presented. I agree with the
author but need more information
to make a final decision.
Is the text biased? The text says I worry that this technology will be
nothing negative. used by the military. I want to know
more about possible applications.

What Is Refraction? 12.1
Light travels in straight lines through air. But what happens when it
travels from one material into another? You likely have noticed the strange
phenomenon of a spoon or stir stick, when placed in a glass of water,
looking somewhat disconnected at the surface of the water. The spoon is not
really disconnected. It is made of a solid material. So what is happening?
Why does an object appear disconnected, or broken, at the water’s surface?
Find out by doing the “Exploring With Light” activity.
T RY THIS EXPLORING WITH LIGHT

SKILLS: Observing, Analyzing SKILLS HANDBOOK
3.B.
Equipment and Materials: beaker or other transparent
container; stir stick; coin; water
1. Place a coin in the middle of a beaker. Fill the beaker with water.
2. Look at the coin from the edge of the beaker. Be sure that
you are looking above the beaker through the surface of the
water as in Figure 1.
stir stick
3. While looking above the beaker, aim a stir stick just inside
the outer edge of the coin so that it looks as though you are
going to just touch the coin. Place the stir stick in the water
and attempt to touch the coin.
4. Now look at the beaker from the side and notice the position
of the stir stick and the position of the coin.
A. Did you touch the outer edge of the coin when you placed the
stir stick in the water? T /I
B. Describe where the stir stick actually went. T/I
coin
C. Why do you think the stir stick missed the coin even though
you had aimed the stick directly at the coin while looking
above the beaker? Write a brief explanation. T/I Figure 1
Bending Light
From the previous activity, you noticed that, even though you had aimed
the stir stick at the coin, you missed touching the coin. The light coming
from the coin to your eyes became bent. The light from the coin went
through the water and then through the air into your eyes. Along this path,
the light changed direction as it went from water into air. This bending of
light when it travels from Ontario Science
one material 10 SB into another is called
(medium)
0-17-635528-6
refraction. Refraction causes interesting effects whenever light travels refraction the bending or change in
from one medium to another. FN C12-F04-UDOS10SB direction of light when it travels from one
CO Allan Moon medium into another
Pass 2nd pass
Approved
Not Approved
NEL 12.1 What Is Refraction? 515

LEARNING TIP What Causes Refraction?
Using an Analogy The refraction of light becomes obvious when you shine a powerful beam
An analogy allows you to make a
of light into water at an angle (Figure 2). Why does the direction change?
comparison by using as your example
something that is simpler and easier to A useful analogy is to think of a wagon travelling at an angle from pavement
understand. Although a wagon moving onto sand (Figure 3). When the right front wheel hits the sand, it slows
from pavement onto sand is not a beam down. The left front wheel, however, does not slow down because it is
of light, this scenario allows you to still on the pavement. This results in the wagon pivoting about the slower
understand the principle of refraction
right front wheel. So the direction of the wagon changes as it moves from
using everyday objects.
pavement onto sand. You might notice a similar effect when a car travels at
an angle from pavement onto mud or snow.
pavement
sand
Figure 2 The refraction of light going from air into water Figure 3 A wagon changes direction when travelling at an angle from
pavement onto sand because one front wheel slows down while the
other wheels continue moving at a higher speed.
DID YOU KNOW? How Fast Is the Speed of Light?

Measuring the Speed of Light The analogy of refraction using the wagon involves one of the front wheels
The first calculation of the speed
slowing down as the wagon travels from one surface onto another. Is this
of light that was close to today’s
accepted value of 3.00 × 108 m/s the case with light? That is, is the speed of light in water different from the
was done by Dutch mathematician speed of light in air? Measurements of the speed of light clearly indicate
pavement
Christian Huygens. He based that this is indeed the case. Light travels at a speed of 3.00 × 108 m/s
his calculations on astronomical in a vacuum, at a speed of 2.26 × 108 m/s in water, and at a speed of
observations of Io, one of Jupiter’s
moons, collected by Danish
1.76 × 108 m/s in acrylic. (Note that the speed of light in air is slightly less
astronomer Olaus Roemer in 1676. than the speed of light in a vacuum. This difference, however, is so small that
it is not significant. Therefore, we use the same value for the speed of light in
GO TO NELSON SCIENCE a vacuum and the speed of light in air.)sand
The Rules for Refraction

Because the speed of light changes depending on the medium through
which it is travelling, it is possible to make two statements about refraction
angle of refraction the angle between in general and about the angle of refraction in particular. The angle of
the refracted ray and the normal refraction is the angle between the refracted light ray and the normal.
1. The incident ray, the refracted ray, and the normal all lie in the same
plane. The incident ray and the refracted ray are on opposite sides of
the line that separates the two media.C12-F05-UDOS10SB.ai
The front wheels are turning into the
516 Chapter 12 • The Refraction of Light sand in top illustration. NEL
2. Light bends toward the normal when the speed angle of
of light in the second medium is less than the inc incidence
ide
nt r
speed of light in the first medium (Figure 4). ay normal
Light bends away from the normal when the
speed of light in the second medium is greater.
re
fra
(This second statement can also be predicted from
ct
ed
the principle of the reversibility of light; light angle of
ra
y
still follows the same path even if you switch its refraction
original direction. Recall that this principle also
applies to the reflection of light.)
Figure 4 Light bends toward the normal when its speed decreases
in a material.
The Bent Spoon

Using the concept of refraction, it is possible to explain why a spoon in a glass READING TIP
of water appears bent (Figure 5). Light coming from the part of the spoon below Evaluating
the water’s surface must travel through the water into air. The speed of light To determine whether a main idea
increases as light goes from water into air so, if it hits the water–air boundary at seems reasonable, think about examples
that you know. For instance, you may
an angle, light will bend away from the normal. The human brain perceives light
have seen a fallen tree branch appear
to travel in a straight line, so it will project to be bent in a river. By applying the
these light rays backwards to a virtual light explanation of refraction to a similar
source behind the real spoon (Figure 6). example from your own experience, you
This is similar to how the brain projects might determine if the explanation is
reasonable.
light rays to form a virtual image in a
plane mirror.
Figure 5 The familiar “bending” of Figure 6 The brain thinks that the spoon
a spoon in a glass of water is behind where it really is because light
is refracted away from the normal when
travelling from water into air.
Partial Reflection and Refraction

C12-F27-UDOS10SB.ai
Light has some very interesting and unique properties that are not observed
with most other matter in nature. Do the “Examining Light in a Window”
activity on the next page to observe one of these properties.

T RY THIS EXAMINING LIGHT IN A WINDOW
SKILLS: Questioning, Observing SKILLS HANDBOOK
3.B.
1. Stand directly in front of a clean window and look through it. C. Light coming from you appears to have two different
This experiment works better if it is dimmer outside or the behaviours based on questions A and B. Do you find this to
window is in shadow. Look at a tree, a person, a building, or be surprising? Explain.
some other object outside. D. A thought experiment is one that you do in your head; it
2. Continue to stand directly in front of the window, but this is not one that you actually do. Let us do a brief thought
time focus on the glass directly in front of you. You should experiment. Imagine that you were to throw a tennis ball at a
be able to see a faint reflection of yourself in the window. window. Predict the two possible outcomes when the ball hits
(Try turning the light off or on in the room if you have trouble the glass. Is it possible that these two outcomes could both
seeing your reflection.) occur at the same time? T/I
A. During late dawn or early dusk, someone standing outside E. Unlike the ball, light travelled through the window (to the
the window would be able to see you clearly through the outside observer) and also bounced back (allowing you to
window. What does this tell you about how light has travelled see your reflection) at the same time. This property does
from you toward the outside observer? T /I not appear to happen with most other things (such as balls).
B. You are also able to see your reflection in the glass. What Does this imply that light has at least one property that might
does this tell you about the light that travels from you toward make it special or unique? Explain. T/I
the glass surface directly in front of you? T /I
Refraction is often accompanied by reflection. Some of the light that

strikes water is reflected off the water, but a great deal of light is also
refracted as it enters the water and illuminates the water below the surface
(Figure 7). A transparent window exhibits the same property that light
can be both reflected and refracted at the same time. This is called partial
reflection and refraction. This effect is enhanced if glass has a special film
coating behind it that allows some of the incident light to be refracted
but that also reflects much of the incident light. This results in a mirrored
To see some interesting
surface that you can see through, but others cannot. This type of surface is
simulations involving refraction, called a silvered two-way mirror, and it is exactly how mirrored sunglasses
GO TO NELSON SCIENCE are made (Figure 8).
Figure 7 A beam of light is both reflected and refracted when it Figure 8 Mirrored sunglasses allow you to see out but do not allow
strikes water. The tree is visible as a result of reflection, whereas the others to see in.
fish is visible due to refraction.

Two-way mirrors are used in the windows of many buildings (Figure 9).
In the summer time, these windows reflect some of the incident sunlight,
which reduces air-conditioning costs. The reflection of clouds and the blue
sky off these windows also makes them very visually appealing.
UNIT TASK Bookmark

You can apply what you learned about refraction at the boundary of two media as you think
about the Unit Task described on page 588.
Figure 9 Many modern buildings
use windows that illustrate the partial
transmission and reflection of light.
IN SUMMARY
• Refraction is the bending or change in direction • Light bends toward the normal when it slows
of light when it travels from one medium into down in a medium and away from the normal
another. when it speeds up in a medium.
• The speed of light depends on the medium that it • Light can undergo partial reflection and
is passing through. refraction at the same time at a surface.
CHECK YOUR LEARNING

1. Clearly explain what is meant by the term 4. Which way will light bend if it is travelling
“refraction.” K/U (a) faster in a medium?
2. (a) Explain why refraction takes place. (b) slower in a medium? K/U
(b) What conditions must be present for refraction to 5. What property of light is illustrated in Figure 11? K/U
take place?
(c) From your answers to (a) and (b), make a prediction
about the speed of light in water as compared to the
speed of light in air. K/U
3. Figure 10 represents a beam of light going from one
medium into another. T/I
medium A
Figure 11
6. Give some examples of where you have seen two-way

medium B
mirrors used. A
7. In your own words, explain some practical applications of
partial reflection and refraction. A C
Figure 10
(a) One medium is air, in which light has a speed of

3.00 × 108 m/s. The other medium is ice, in which light
has a speed of 2.29 × 108 m/s. Use this information to
identify medium A and medium B. Explain.
(b) Do you know in which direction the light beam is
travelling? Does it matter? Explain.

The Path of Light—From Air into Acrylic SKILLS MENU

In Chapter 11, you learned that light travels in straight lines. Mirrors and Hypothesizing Observing
their applications depend on this property. But what happens when light Planning Evaluating
travels from one medium into another? In this activity, you will explore Controlling Variables Communicating
the path of light as it travels through two transparent media.
Purpose 2. Project a single ray of light at the centre of the

To explore the path of light as it travels from one flat edge of the block at an angle of incidence
transparent medium into another. of 0° (that is, you will be projecting along the
normal). Measure the corresponding angle
in the acrylic block. (Note that if polar graph
Equipment and Materials paper is not available, you will have to mark
• ray box with single slit the path of the light rays with a pencil and
• semicircular acrylic block measure the appropriate angles later with a
• polar graph paper (or ruler and protractor) protractor.)
3. Repeat step 2, but for angles of incidence in
Procedure air of 10°, 20°, 30°, 40°, 50°, and 60°. Always
SKILLS HANDBOOK
5., 6.
1. Place the acrylic block at the centre of the measure the angle of the refracted ray in the
polar graph paper with its flat edge along the acrylic block with respect to the normal. Record
horizontal centre line. Centre the acrylic block your results in a table similar to Table 1 at the
on the paper. The 0–180° line on the polar graph top of the next page. (Note that at some point
paper now acts as the normal and passes through you should also notice a reflected ray going back
the centre of the acrylic surface. You will be into the air from the surface of the acrylic. You
projecting light rays at the exact centre of the can actually see the reflected ray in Figure 1. This
polar graph paper (the origin) (Figure 1). ray follows the laws of reflection that you learned
about in Chapter 11. Please ignore this reflected
ray for now because in this experiment, we are
concentrating on the refracted ray in the acrylic
block. We will return to this reflected ray later in
the chapter.)
incident ray When unplugging the ray box, do not pull the electric
angle of
incidence cord. Pull the plug itself.
origin
refracted
angle in acrylic
normal
refracted ray
Figure 1

Table 1 Refraction of Light as it Passes from Air into Acrylic
Angle of incidence in Angle of refracted ray in i

___ sin i
______
air (i ) acrylic block (R ) R sin i sin R sin R
0°
10°
20°
30°
40°
50°
60°
Analyze and Reflect Apply and Extend

(a) What was the angle of the refracted ray in acrylic (e) What trend do you notice in the angle of the
for the initial angle in air of 0°? Does this answer refracted ray in acrylic as the angle of incidence
make sense to you? Explain. T/I
in air steadily increases? T/I
(b) How did the value of the angle in air (angle of (f) With the exception of the first measurement,
incidence) compare with the angle in acrylic for what do you notice about the ratio ___ i ?T/I
R
the remaining measurements? T/I
(g) Again, with the exception of the first
(c) Which way did the refracted ray in the acrylic measurement, what do you notice about the
bend when compared with the normal? T/I sin i ?
ratio ______ T/I
sin R
(d) Why do think you used a semi-circular medium i
in this experiment? (h) Why were you not able to calculate ___
T/I
R
sin i for an angle of incidence of 0°?
or ______ T/I
sin R
(i) Which ratio, ___ sin i , is nearly constant
i or ______
R sin R
for light travelling from air into acrylic? T/I

The Refraction of Light through SKILLS MENU

Different Media Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
In Activity 12.2, you examined the refraction of light when it travelled Controlling Variables Communicating
from air into a semicircular acrylic block. You also learned that light
bends toward the normal when it slows down in a medium. What
happens when light goes through different media? What can you learn
by examining and comparing refraction in different media?
Purpose 2. Fill the dish with water.

To explore how the angle of refraction changes in 3. Project a single ray of light at the centre of the
different media. semicircular dish at an angle of incidence of 0°
(that is, you will be projecting along the normal).
Equipment and Materials Measure the corresponding angle that light
follows in the water in the semicircular dish.
• semicircular plastic dish
(If polar graph paper is not available, you will
• polar graph paper (or ruler and protractor) have to mark the path of the light rays with a
• ray box with single slit pencil and measure the appropriate angles later
• water with a protractor.)
• vegetable oil 4. Repeat step 3, but for angles of incidence in
• glycerol (optional) air of 10°, 20°, 30°, 40°, 50°, and 60°. Always
measure the angle of the refracted ray in the
• dish detergent (to clean vegetable oil residue on
semicircular dish with respect to the normal.
plastic dish)
Record your results in a table similar to
Table 1. Accuracy is extremely important in this
Procedure
SKILLS HANDBOOK
5., 6.
experiment.
1. Place the semicircular dish at the centre of the
polar graph paper with its flat edge along the
horizontal centre line. Centre the semicircular
dish on the paper. The 0–180° line on the polar 5. Repeat steps 1 to 4, but this time put vegetable
graph paper now acts as the normal and passes oil in the semicircular dish. Enter your data in
through the centre of the semicircular dish. the last row of your table. (Make sure that you
You will be projecting light rays at the exact use the dish detergent to carefully clean the
centre of the polar graph paper (the origin). vegetable oil from the semicircular dish after
This experimental setup is identical to that in completing step 5.)
Activity 12.2 (See Figure 1 on page 520).

Table 1 Refraction of Light in Different Media
Angle of incidence in air 0° 10° 20° 30° 40° 50° 60°

Angle of refraction in water
Angle of refraction in vegetable oil
Analyze and Reflect Apply and Extend

SKILLS HANDBOOK
1.D.
(a) Did the refracted ray bend toward the normal sin i using your
(e) As in Activity 12.2, calculate ______
sin R
• in the water? data for vegetable oil. T/I
• in the vegetable oil? T/I (f) With the exception of i = 0°, how does your
sin i for vegetable oil in compare
value of ______
(b) With the exception of an angle of incidence of 0°, sin R
compare the angles of refraction for water and for with the value for acrylic in Activity 12.2? T/I
vegetable oil for the same angles of incidence. T/I

(g) Could the method used in this activity be used
(c) What do your results tell you about the speed of to distinguish between two liquids that appear to
light in water or in vegetable oil compared with be identical? Explain. T/I
the speed of light in air? T/I

(h) Check your answer from part (g) by repeating
(d) In which medium, water or vegetable oil, did the steps 1 or 4 of the Procedure using glycerol. First
speed of light slow down more? T/I
check the MSDS for glycerol and follow any
necessary safety precautions. Record and analyze
your data as before. T/I

12.4 The Index of Refraction
French physicist Jean Foucault made the first measurement of the speed of
light in a medium (other than a vacuum or air), in 1862. He measured the
speed of light in water to be 2.25 × 10 8 m/s. Since then, the speed of light
has been measured for a variety of media. The speed of light is different for
each medium, but is always less than the speed of light in a vacuum. The
To learn more about Foucault’s
experiments to measure the speed of change in the speed of light at the boundary of a substance causes refraction.
light in various media, The speed of light in a medium is a distinctive optical property
GO TO NELSON SCIENCE of that medium.
The index of refraction for a medium is defined as the ratio of the speed
index of refraction the ratio of the speed
of light in a vacuum to the speed of light in that medium. Mathematically,
of light in a vacuum to the speed of light the index of refraction is written as
in a medium, n = _vc_ ; this value is also
equal to the ratio of the sine of the angle
n = __vc
of incidence in a vacuum to the sine of the
sin i
where n is the index of refraction, c is the speed of light in a vacuum, and
refracted ray in a medium, n = ______
sin R v is the speed of light in a given medium.
Because c and v are both speeds and can be expressed in the same units of
m/s, the units in the equation divide out, so n has no units. This means that
the index of refraction (n) is a dimensionless quantity.
The same index of refraction values can be calculated using the sines of
angles. Imagine an incident ray passing from a vacuum into a transparent
medium. The index of refraction for the medium can also be written as
sin i
n = ______
sin R
where i is the angle of incidence and R is the angle of refraction.
Table 1 shows the indices of refraction for various media. Compare your
values for n for acrylic and vegetable oil from Activities 12.2 and 12.3 with
Table 1 The Index of Refraction for
the values in Table 1.
Various Media
Index of
Medium refraction (n) SAMPLE PROBLEM 1 Calculating the Index of Refraction
SKILLS HANDBOOK
air/vacuum 1.00 The speed of light in sodium chloride (salt) is 1.96 × 10 8 m/s. 5.B., 5.C.
ice 1.31 Calculate the index of refraction for sodium chloride (Figure 1).
pure water 1.33 Given: c = 3.00 × 10 8 m/s

ethyl alcohol 1.36 vsodium chloride = 1.96 × 10 8 m/s
quartz 1.46 Required: n=?
vegetable oil 1.47 c
Analysis and Solution: n = _
v
olive oil 1.48
3.00 × 10 m/s
8
= ____________
acrylic 1.49 1.96 × 10 8 m/s
= 1.53
glass 1.52
Figure 1
zircon 1.92 Statement: The index of refraction for sodium
chloride (salt) is about 1.53.
diamond 2.42

You have just seen how the formula n = __vc can be used to determine the LEARNING TIP
index of refraction, n, for a medium. The same formula can also be used to Word Origins
calculate the speed at which light travels in that medium. The symbol “c” for the speed of light
may seem strange because there is
no letter “c” in the word light. The “c”
SAMPLE PROBLEM 2 Calculating the Speed of Light comes from the Latin word “celeritas,”
Calculate the speed of light in olive oil. meaning “velocity.”
Given: c = 3.00 × 10 8 m/s

nolive oil = 1.48 (from Table 1)
Required: v=?
c
Analysis and Solution: n = _
v
v×n=c DID YOU KNOW?
The Real Value
v = __nc
The real value for the index of
= 3.00 × 10 8 m/s
____________ refraction for air is 1.000 293. None of
1.48 the calculations in this text go to this
= 2.03 × 10 8 m/s degree of precision, so, for this course,
Statement: The speed of light in olive oil is about 2.03 × 10 8 m/s. you can treat the indices of refraction
for air and vacuum the same.
IN SUMMARY
• The index of refraction for a medium is defined • Mathematically, the index of refraction is defined
as the ratio of the speed of light in a vacuum as n = __vc or n = ______
sin i .
sin R
to the speed of light in that medium; it is a
dimensionless quantity.
CHECK YOUR LEARNING

1. (a) What is meant by the term “index of refraction”? 5. An 80 % sugar solution has an index of refraction of 1.49.
(b) Why is it a dimensionless quantity? K/U Calculate the speed of light in this solution. T/I
2. The speed of light in vinegar is 2.30 × 10 8 m/s. 6. The index of refraction for acetone is 1.36. What is the
Determine the index of refraction for vinegar. T/I speed of light in acetone? T/I
3. The speed of light in sapphire is 1.69 × 10 8 m/s. What 7. The speed of light in an unknown substance is 2.20 × 10 8 m/s.
is the index of refraction for sapphire (Figure 2)? T/I (a) Calculate the index of refraction for this substance.
(b) Use Table 1 to determine a possible identity of the
unknown substance. T/I
8. Suppose you calculated the speed of light in an unknown
substance to be 4.00 × 10 8 m/s. How could you tell if you
made an error in your calculations? K/U
9. A light ray travelling from diamond into air has an angle of
refraction of 56°. A piece of glass is then placed right next
to the diamond.
Figure 2 (a) How will the angle of refraction change?

(b) Justify your answer by considering any changes to the
4. Use Table 1 to calculate the speeds of light in
speed of light. Include a ray diagram. T/I C
(a) quartz
10. Why is the index of refraction a unique property of a
(b) diamond T/I
medium? K/U
NEL 12.4 The Index of Refraction 525

12.5 Total Internal Reflection
When light travels from one medium into another, some of the light is reflected
and some is refracted. As you know, light slows down when it travels from air
into acrylic or water. This results in the light bending toward the normal.
Light, however, bends away from the normal when it speeds up at the
boundary of two media. (An example of this is when light travels from acrylic
into air.) In this situation, the angle of refraction is always larger than the angle of
incidence (Figure 1). In fact, the angle of refraction continues to increase as the
angle of incidence increases. Eventually, the angle of refraction will become 90°.
critical angle the angle of incidence that The angle of incidence at this point is called the critical angle. The critical angle
results in an angle of refraction of 90° is the angle of incidence that produces a refracted angle of 90°.
n1 > n2
air
n2 = 1.00
water
n1 = 1.33
Figure 1 Medium 1 (water) has an index of refraction that is greater than that of medium 2 (air).
So an incident ray in water speeds up as it goes into air.
If you increase the angle of incidence past the critical angle, the refracted
ray will no longer exit the medium. Instead, it will reflect back into the
medium. In other words, the refracted ray disappears; only a reflected ray is
total internal reflection the situation visible. This phenomenon is called total internal reflection (Figure 2).
when the angle of incidence is greater
than the critical angle
LEARNING TIP
Understanding Diagrams
It is often easier to understand a concept
from a diagram than from words. Total
internal reflection is a perfect example
of this. After looking at Figure 2, draw
your own diagrams to illustrate total
internal reflection. Show your diagrams
to a classmate and explain them. Figure 2 Total internal reflection of laser light in water

Total internal reflection occurs when these two conditions are met:
1. Light is travelling more slowly in the first medium than in the
second.
2. The angle of incidence is large enough that no refraction occurs in To see some interesting simulations
the second medium. Instead, the ray is reflected back into the first for total internal reflection,
medium (Figure 3). GO TO NELSON SCIENCE
air Ray 1 air Ray 2 air Ray 3
water water water
critical
angle
(a) (b) (c)
Figure 3 Ray 1 is refracted as it passes from water into air. Ray 2 has an angle of refraction of 90°;
the angle of incidence is equal to the critical angle. Ray 3 is reflected internally back into water and does
not go into air. Note that in (a) and (b), some light is reflected internally but not as strongly as in (c).
Water has a critical angle of 48.8°. This means that an angle of incidence
greater than 48.8° would result in total internal reflection in the water. The
critical angle is a physical property of a medium. (Recall that the index of
refraction is another physical property.)
Diamonds Are Forever

One of the features that make diamonds so attractive in jewellery is the fact
that they sparkle. This “sparkling” is due to the cut of the diamond faces,
which, combined with the high index of refraction for diamond (n  2.42),
results in the total internal reflection of light. The high refractive index
means that diamonds have a very small critical angle: 24.4°. So a great deal of
incident light undergoes total internal reflection inside the diamond. A light
To learn more about how
ray can bounce around several times inside the diamond before eventually jewellers and gem cutters use
exiting through a top face of the gemstone (Figure 4(a)). This causes the optics in their work,
“sparkling” effect that makes diamonds so appealing (Figure 4(b)). GO TO NELSON SCIENCE
READING TIP
Evaluating
Examine illustrations and captions
carefully to determine how they increase
your understanding of a text. Make
connections to what you already know
about the topic. For example, you might
have seen pictures of diamonds that
(a) (b) appear to support the explanation for
Figure 4 (a) Many light rays undergo two total internal reflections inside a diamond. why diamonds sparkle.
(b) This is what makes a diamond “sparkle.”
NEL 12.5 Total Internal Reflection 527

Fibre Optics
Fibre optics is a technology that uses light to transmit information along a
glass cable. The light must not escape as it travels along the cable. To achieve
this, the cable must have a small critical angle so that light entering it will
have an angle of incidence greater than the critical angle. Substances that
have a small critical angle include high-purity glass and special types of
plastics, such as Lucite (Figure 5).
(a) (b)
Figure 5 (a) A laser beam undergoes total internal reflection in a Lucite rod. (b) In close-up,
you can see the point at which total internal reflection occurs.
READING TIP Fibre optics is used extensively in the communications industry for
Evaluating phones, computers, and TVs. Fibre optics also plays a major role in the
Check a text for clues of bias. Are movie industry. Science fiction films sometimes make use of fibre-optic
advantages and disadvantages cables to represent small windows in “giant” spaceships (Figure 6). The
described? If only advantages are given,
automotive industry uses optical fibres to transmit light to the instrument
can you think of any disadvantages? For
example, in a text about the applications panel in cars. As you learned in Chapter 2, medical professionals use fibre-
of fibre optics, does the author treat the optic technologies to see into parts of the human body that would otherwise
topic in a balanced way? Are both pros be inaccessible. An endoscope is a fibre-optic device that allows doctors
and cons described? If not, does the to check the health of various internal organs (Figure 7). The endoscope
text show a bias toward one side of the
consists of two separate fibre-optic bundles. One bundle shines light into the
issue?
body. The second bundle carries the reflected light back to the instrument.
To learn more about careers in A colonoscopy, for example, is now a very common procedure among males
fibre optics, over 50 years of age. In this procedure, doctors use an endoscope to check
GO TO NELSON SCIENCE for growths that could develop into colon cancer.
Figure 6 Light travels along optical fibres and Figure 7 An endoscope is an important fibre-
then emerges at the ends. optic device used for medical diagnoses.

The Triangular Prism
A triangular prism also exhibits total internal reflection. The critical angle
for glass is about 41.1°. If a prism is oriented in such a way that the angle of
incidence is greater than 41.1°, total internal reflection will result. Prisms
are much more useful to reflect light than mirrors because a prism reflects
almost 100 % of the light internally. Mirrors reflect most incident light
but lose a little through absorption. Also, the silvered surface of mirrors
deteriorates over time. For these reasons, most optical devices, such as
cameras and binoculars, use prisms instead of mirrors. The emergent ray
can be either 90° or 180° relative to the incident ray, depending on the
placement of the prism (Figure 8).
45°
45°
45°
45°
45°
45°
(a) (b)
Figure 8 By changing the orientation of the prism, you can change the direction of the emergent
ray by either 90° or 180°. In (a) the light ray goes through just one reflection. In (b) it goes through
two reflections.
In Chapter 11, you learned that plane mirrors could be used to make
a simple periscope. A more complex periscope uses triangular prisms to
change the direction of light by 90° (Figure 9). Each triangular face has
angles of 45°, 45°, and 90°. A pair of binoculars uses two such prisms to
change the direction of light by 180° (Figure 10).
triangular prisms
prisms
Figure 9 A periscope uses triangular prisms to Figure 10 Binoculars use two triangular prisms
change the direction of light by 90° twice. to change the path of light.

Retro-reflectors and Prisms
retro-reflector an optical device in which A retro-reflector is an optical device that returns any incident light back
the emergent ray is parallel to the incident in exactly the same direction from which it came. The prism orientation in
ray
Figure 8(b) on the previous page is an example of a retro-reflector because
the emergent ray is parallel to the incident ray as a result of two total
internal reflections.
If you cut off the corner of a glass cube, you would produce a corner cube
retro-reflector. This type of retro-reflector has three perpendicular faces (like
the corner of a room) (Figure 11). It will reflect an incident ray coming from
any direction back along its original direction.
Figure 11 (a) and (b) A corner

cube retro-reflector is created by
cutting off the corner of a cube.
(c) The resulting corner cube
retro-reflector after three corners
have been ground down. (a) (b) (c)
(a) (b) (c)
The Laser Ranging Retro-Reflector (LR³ or “LR-cubed”) left on the Moon

by the Apollo 11 astronauts is an example of this type of retro-reflector. The
LR³ is an array of 100 corner cube retro-reflectors set up in a 10 × 10 grid
mounted on a square aluminum panel that is 46 cm long, about the size of
a large pizza box. These 100 corner-cubed prisms on the Moon are made of
quartz. With this device, scientists on Earth have been able to shine a very
powerful laser beam at the Moon and bounce it off the LR³. This enabled
scientists to determine the Earth–Moon distance with an accuracy of 3 cm.
The LR³ is still working, and recent laser measurements have refined the
C12-F31-UDOS10SB.ai
Earth–Moon distance even further, down to within a few millimetres.
You may not have heard of retro-reflectors before, but you have almost
To learn more about the LR³ on
the Moon and retro-reflectors certainly seen them. They are built into bike reflectors and the reflective
in general, strips on clothing and helmets. Road signs also contain tiny retro-reflectors
GO TO NELSON SCIENCE in the paint so that you can see the signs at night (Figure 12).
0-17-635528-6
FN C12-F31-UDOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 3rd pass
Approved
Not Approved
Figure 12 Retro-reflectors on road signs help you see the signs at night.

UNIT TASK Bookmark
You can apply what you learned about total internal reflection as you plan what optical
device you will construct for the Unit Task described on page 588.
IN SUMMARY
• The critical angle is the angle of incidence for • Optical devices such as periscopes, binoculars,
which the angle of refraction is 90°. This occurs and fibre-optic cables make use of total internal
only when light passes from one medium into reflection.
another with a lower index of refraction. • A triangular prism, depending on its orientation, can
• Total internal reflection occurs if the angle of change the direction of light by 90° (one total internal
incidence is greater that the critical angle. reflection) or 180° (two total internal reflections).
CHECK YOUR LEARNING

1. What two conditions must be satisfied in order for total
internal reflection to occur? K/U
2. Why does total internal reflection occur only when light
medium A
medium
travels more slowly through the first medium than in medium A
A
the second and not the other way around? Include a ray
diagram with your answer. T/I mediumBB
medium
medium B
3. The critical angle for sapphire is 34.4°. For each angle
of incidence, determine if it would result in total internal
reflection in a sapphire. K/U
(a)
(a) 23.7° (b) 34.7° (c) 53.4° (d) 31.5°
4. What is the advantage of using triangular prisms over
plane mirrors in optical devices requiring the reflection of
light? K/U A
medium A
medium
5. Will you get more total internal reflection with a medium medium A
A
that has a small critical angle or with one that has a large
critical angle? Explain. K/U mediumBB
medium
medium B
6. Brainstorm to create a list of suggestions for using
retro-reflectors to improve road safety on a winding, dark,
country road. A (b)
7. Briefly describe three applications that make use of the
total internal reflection of light. A
8. Figure 13 shows light travelling through two different
media. In which diagrams would total internal reflection be
possible if the angle of incidence were increased? T/I medium A
medium
medium A
A
9. Look again at Figure 13. For each diagram, in which
medium would total internal reflection occur? Explain your
answers. T/I
medium B
medium
medium B
B
(c)
Figure 13

Measuring the Critical Angle SKILLS MENU

for Various Media Hypothesizing
Predicting
Observing
Analyzing
Planning Evaluating
Light bends away from the normal when it travels more slowly in Controlling Variables Communicating
the first medium than in the second. Total internal reflection
in the first medium will occur when light has an angle of incidence
greater than the critical angle for that medium.
Purpose Procedure
SKILLS HANDBOOK
5., 6.
To explore the critical angle for various media. 1. Place the acrylic block at the centre of the polar
SKILLS HANDBOOK
graph paper. The flat edge of the block should
Equipment and Materials 1.B. lie along the horizontal centre line of the polar
• ray box with single slit graph paper. Centre the glass block carefully on
• semicircular acrylic block the paper. The 0–180° line on the polar graph
• semicircular plastic dish paper now acts as the normal. This line passes
• water through the centre of the acrylic surface. You
• glycerol will be projecting light rays at the exact centre
• vegetable oil of the polar graph paper (the origin). The setup
• polar graph paper (or ruler and protractor) is similar to that for previous investigations in
• dish detergent (to clean vegetable oil residue this chapter with one exception: You will now be
on plastic dish) aiming light rays at the curved part of the block.
You will aim the ray box so that the incident ray
goes through the centre of the block (that is, the
origin on the polar graph paper). Position the
ray box so that you produce a refracted angle in
air that is larger than the angle of incidence in
the acrylic block (Figure 1).
normal
refracted
ray
origin
incident
ray
Figure 1

SKILLS HANDBOOK
2. Slowly move the ray box to increase the angle Analyze and Reflect 5.D.2.
of incidence in the acrylic block. Eventually, the (a) The accepted values for the critical angles for
refracted ray leaving the block will disappear. acrylic, water, and vegetable oil are 42.2°, 48.8°,
Measure the angle of incidence at this point. and 42.9° respectively. Compare your measured
Enter your data in the first row of a table similar values with the accepted values. T/I
to Table 1 shown below. (If you are not using

(b) What sources of error could account for
polar graph paper, mark the path of the light
any differences between your measured
rays with a pencil. Measure the angles later with
values for the critical angles and the accepted
a protractor.)
values? T/I
Table 1 Critical Angles for Different Media (c) Did partial reflection and refraction still occur
Medium Critical angle when light was travelling more slowly in the first
medium than in the second? Explain. T/I
acrylic
water
Apply and Extend
glycerol
(d) The index of refraction for acrylic is 1.49. For
vegetable oil water, it is 1.33. For vegetable oil, it is 1.47. Given
these values and your measured critical angles,
3. Repeat steps 1 and 2 using the semicircular what trend do you think exists between the
plastic dish. Use water first, then glycerol, and index of refraction and the critical angle? T/I
finally vegetable oil. (Make sure that you use

(e) Research to find out the critical angle and
the dish detergent to clean the glycerol and the
index of refraction for glycerol. How close were
vegetable oil carefully from the semicircular dish
your measured values to the accepted values? T/I
after each use.)

When unplugging the ray box, do not pull the electric cord. GO TO NELSON SCIENCE

SCI ENCE
Hiding in Plain Sight—The Invisibility Cloak
“… if its refractive index could be made the same as that of
air; for then there would be no refraction or reflection as the
light passed from glass to air.” With this statement, the central
character in H. G. Wells’s novel The Invisible Man attempts material A
material A
to explain how he could become invisible. Many works of
entertainment have used invisibility as a plot device, from Wells’s
1897 novel to Harry Potter’s invisibility cloak. But is it just fiction, material B
or is there something more to the idea? material B
Surprisingly, scientists are paying serious attention to the idea
of some kind of invisibility device. They recently demonstrated a
device that could bend microwaves around copper rings, in effect, (a)
“cloaking” the copper rings. This means that if you subjected the
device to microwaves, you could not detect the rings (Figure 1).
This result astounded physicists around the world. Light is also an
electromagnetic wave, just like microwaves. Could this concept be
material A
applied to light? material A
material B
material B
(b)
Figure 2 (a) In regular refraction, the light ray is on the opposite side
of the normal as compared to the incident ray. (b) Negative refraction
occurs when the refracted light ray is on the same side of the normal
as the incident ray.
The physics of cloaking, however, is valid. It has already been

successfully demonstrated with microwaves. True invisibility may
Figure 1 These copper rings are “invisible” to microwaves. Not quite well turn out to be not just fiction (Figure 3).
Harry Potter’s cloak yet.
Scientists are now working with special materials called

metamaterials in an attempt to mimic the microwave experiment
using light. Metamaterials have extraordinary properties that are
not found in natural materials; they respond to electromagnetic
waves in entirely new ways. These new materials have a negative
index of refraction. A negative index of refraction means that
the material still refracts light, but the refracted ray is on the
same side of the normal in the second material (Figure 2). (In all
naturally occurring substances, light is refracted on the opposite
side of the normal.) This unusual property allows scientists to
bend light in unexpected ways. Metamaterials are extremely Figure 3 What an invisibility cloak might look like
difficult to construct, and adapting them to bend light around a
substance still involves many practical difficulties. GO TO NELSON SCIENCE
534 NEL
Phenomena Related to Refraction 12.7
Nature has many interesting phenomena involving light. Geometric optics is a
useful tool that we can use to explain many of these phenomena.
Apparent Depth
A pencil partly under water looks bent when viewed from above (Figure 1).
We can explain this using the concept of refraction and the knowledge that
our brains perceive light rays to always travel in a straight line. Light from
the submerged pencil tip reaches your eyes. Your brain then projects the rays
backwards in a straight line to create a virtual image in the water. This virtual
image is higher than the actual pencil tip, resulting in the pencil appearing to
be bent. The pencil tip appears to be at a shallower depth than it really is. The
distance from the surface of the water to where the object appears to be (the
virtual image) is called the apparent depth (Figure 2). A paddle in the water
also appears to be closer to the surface for the same reason.
Figure 1 A “bent” pencil in water
apparent depth the depth that an object

appears to be at due to the refraction of
virtual light in a transparent medium
source
apparent depth
actual depth
Figure 2 Refraction causes the pencil to appear closer to the surface than it actually is.
Objects under water always appear to be nearer to the surface than they
actually are. Apparent depth is an optical illusion. This is what makes fish
in water appear to be closer to the surface than they actually are (Figure 3).
rio Science 10 SB air

635528-6
C12-F15-UDOS10SB
apparent depth
Allan Moon
Final art
oved
Approved
Figure 3 The illusion of apparent depth
NEL 12.7 Phenomena Related to Refraction 535
For the same reason, the legs of someone standing in water appear to be
shorter. Figure 4 is an illustration of refraction and apparent depth.
(a) (b)
Figure 4 Refraction causes a person’s

legs to appear shorter under water than
they really are.
The “Flattened” Sun
Sunsets offer a unique opportunity to see an unusual image due to refraction.
People notice that when the Sun is near the horizon during sunset, it appears
to be flattened. The Sun, of course, is not really flattened (Figure 5). When
C12-F17-UDOS10SB.ai
the Sun is close to the horizon, light from the bottom of the Sun is refracted
more than light from the top of the Sun. Part of the reason is that air is
more dense near Earth’s surface
Illustrator than higher up in the atmosphere. So the
increased density of air closer
Joel and toSharon
EarthHarris
results in greater bending of the Sun’s
rays. In addition, the light rays from the bottom of the Sun have a greater
angle of incidence than the light rays from the top of the Sun. This results in
UDOS10SB the Sun having a flattened appearance rather than its familiar round shape.
0-17-635528-6

Creative less dense air
Pass Final art
apparent
Approved
flattened Sun
Not Approved more dense air
Sun
(a) (b)
Figure 5 The flattening of the Sun is the result of refraction in Earth’s atmosphere.

Water on Pavement—The Mirage
Many people have noticed what appears to be a pool of water in front of
them as they drive along a highway (Figure 6(a)). This pool of water seems
to be only a short distance away, yet the car never seems to reach it. The
pool appears to be constantly moving away.
The pool of water on a highway is a mirage. A mirage can appear when mirage a virtual image that forms as
light is travelling from cool air into warmer air. The index of refraction a result of refraction and total internal
reflection in Earth’s atmosphere
for air decreases as the air gets warmer. This results in light bending
farther away from the normal as the air temperature continues to increase.
Eventually, total internal reflection occurs in the lowest (hottest) air layer
(Figure 6(b)). The light ray now travels up from the hottest layer to the
cooler layer above and is gradually refracted toward the normal as the air
temperature decreases. This light ray eventually enters your eyes. A motorist
who sees this curved light forms a virtual image on the highway.
In reality, the pool of water is a virtual image of the sky on the highway.
Because the human brain perceives light to travel in a straight line, the
motorist projects the image of the sky onto the highway.
object
cool air
warm air
hot air
hot flat pavement
(a) (b) image
Figure 6 There appears to be a pool of water on the highway. This illusion is caused by the
refraction and reflection of light as it goes through air of different temperatures.
Shimmering
You may have noticed that when the Moon is out at night above a lake, you
can see a shimmering image of the Moon on the water’s surface (Figure 7).
As with a mirage, shimmering is caused by light being refracted as it passes
through air of different temperatures.
At night, the air just above a lake is much warmer than air farther away
from the water’s surface. Moonlight passes through layers of air that have
different temperatures. In the coldest air layer, light travels more slowly so
a light ray going through this layer bends toward the normal. As the light
ray continues travelling downward toward the warmest air layer (just above
the lake), its speed increases, so the light ray bends farther and farther away
Figure 7 Shimmering on a lake is
from the normal. Eventually, total internal reflection occurs in the lowest
caused by light travelling at slightly
warm air layer. This results in multiple virtual images of the Moon on the different speeds through air layers of
water’s surface. different temperatures.

The Rainbow
In the previous chapter, you learned how Isaac Newton used a triangular
prism to separate white light into a continuous sequence of colours. The
dispersion the separation of white light separation of white light into its spectrum is called dispersion. Dispersion
into its constituent colours occurs because each colour of visible light travels at a slightly different speed
when it goes through the glass prism. Violet light slows down more than red
READING TIP
light when it enters the prism. That is why you see violet light being refracted
Challenging Beliefs more than any other colour (that is, bending more toward the normal than
The explanation of a natural any other colour). Red light is refracted the least (Figure 8).
phenomenon or an optical illusion
may challenge a belief that you
hold about something you have
experienced. For example, the
explanation of a rainbow or a
mirage may convince you that you
cannot always believe what you see,
or think you see.
Figure 8 The colours in visible light travel at different speeds through a triangular glass prism.
The rainbow is an optical phenomenon that is produced by water droplets

in Earth’s atmosphere (Figure 9). The first step in the process involves
DID YOU KNOW?
refraction as light enters the raindrop (going from air into water), resulting
Over the Rainbow in dispersion. The second step is partial internal reflection when this light
The geometry of a rainbow is very
precise. The angle between the
hits the back of the raindrop. The third step is refraction as the light now
rainbow and the viewer is always the exits the raindrop (going from water into air). This is the light that your
same: about 42°. All rainbows would eyes see, which you perceive as a rainbow. Your brain projects these light
form complete circles if the ground rays backwards and forms a virtual image of the spectrum: a rainbow
were not in the way.
(Figure 10). You can only see a rainbow when the Sun is behind you.
Figure 9 As long as the Sun remains behind you, a Figure 10 The rainbow is caused by a combination of dispersion and partial
rainbow moves as you move. internal reflection in water droplets in the atmosphere. Millions of raindrops are
necessary to produce a rainbow.
RESEARCH THIS OTHER ATMOSPHERIC OPTICAL PHENOMENA
4.A., 4.B.
Light produces far more atmospheric phenomena than the few Complete one of these research questions.
mentioned in this section (Figure 11). In this activity you will 1. Research how a sun dog or a moon dog is produced.
research one of these phenomena.
2. Research how an icebow is formed.
3. Research how a “green flash” is produced.
4. Research another interesting atmospheric light phenomenon
that has not been mentioned in this section.
Answer the question that matches the phenomenon you chose.
A. What conditions are necessary to produce a sun dog or a
moon dog? T/I
B. What is the primary difference between a rainbow and an
icebow? T/I
C. Explain how a “green flash” is produced in the atmosphere.
Why is the “green flash” so difficult to see? T/I
D. Briefly explain how the other light phenomenon you
Figure 11 The belt of Venus (the dark blue band above researched is produced in the atmosphere. T/I
the horizon) is another natural optical phenomena.
IN SUMMARY
• Objects in water appear to be at a shallower • A mirage is the result of refraction and total
depth (an apparent depth) than they really are as internal reflection in layers of air of different
a result of the refraction of light. temperatures.
• The Sun appears flattened near the horizon • A rainbow is caused by refraction of sunlight and
because light from the bottom of the Sun is partial internal reflection in water droplets in
refracted more through Earth’s atmosphere than Earth’s atmosphere.
light from the top of the Sun.
• Shimmering is caused by light travelling at
slightly different speeds through air layers of
different temperatures.
CHECK YOUR LEARNING

1. (a) Explain what is meant by the term “apparent depth.” 4. What are you really looking at when you see a pool of
(b) What causes this phenomenon? K/U water on a highway that you know is dry? Explain. K/U
2. You want to scoop a fish out of water. Where should you 5. In dispersion, violet light is refracted more than red light.
aim relative to the fish image in order to really capture it? What does this tell you about how the index of refraction for
Explain. K/U violet light compares with that for red light? Explain. K/U
3. In the explanation of a mirage, the text mentioned that 6. What three changes in direction does a light ray undergo
the index of refraction for air decreases as the air gets when it interacts with a raindrop to form a rainbow? K/U
warmer. What does this tell you about the speed of light 7. Would a rainbow still form if the speed of light did not change
in cold air compared with the speed of light in warm air? for different colours in a raindrop? Explain. K/U
Explain. K/U

CHAPTER
LOOKING BACK
12
Light changes direction Light bends toward the Total internal reflection may
predictably as it travels normal when it slows down occur when an incident ray
through different transparent in a medium with a higher is aimed at a medium with a
media. index of refraction. lower index of refraction.
• The speed of light depends on the • The index of refraction for a • The critical angle is the angle of
medium that it is passing through. medium is defined as the ratio of incidence for which the angle
(12.1) the speed of light in a vacuum to of refraction is 90°; this occurs
• Light bends toward the normal the speed of light in that medium; it only when light passes from one
when it slows down in a medium is a dimensionless quantity. (12.4) medium into another with a lower
and away from the normal when it • Mathematically, the index of index of refraction. (12.5)
speeds up in a medium. (12.1) refraction is defined as n = _cv or • Total internal reflection occurs if the
• Light can undergo partial reflection sin i . (12.4)
n = ______ angle of incidence is greater that
and refraction at the same time at a sin R the critical angle. (12.5)
surface. (12.1)
Many optical devices make The refraction and reflection Understanding the behaviour
use of the refraction and of light can be used to of light is key to many
reflection of light. explain natural phenomena. careers.
• Optical devices such as periscopes, • Objects in water appear to be at a • Jewellers apply the total internal
binoculars, retro-reflectors, and shallower depth (an apparent depth) reflection of light in precious and
fibre-optic cables make use of total than they really are as a result of semiprecious stones to create very
internal reflection. (12.5) the refraction of light. (12.7) appealing designs. (12.5)
• A triangular prism, depending on • Shimmering and mirages are the • Manufacturers of glass prisms
its orientation, can change the result of refraction and total internal apply the refraction and total
direction of light by 90° (one total reflection in layers of air of different internal reflection of light to
internal reflection) or 180° (two temperature. (12.7) manufacture prisms that can
total internal reflections). (12.5) • A rainbow is caused by refraction accurately change the direction of
and partial internal reflection of light by 90° or 180°. (12.5)
sunlight in water droplets in Earth’s
atmosphere. (12.7)

THINK NOW? refraction (p. 515)
angle of refraction (p. 516)
You thought about the following statements at the beginning of index of refraction (p. 524)
the chapter. You may have encountered these ideas in school, critical angle (p. 526)
at home, or in the world around you. Consider them again and total internal reflection (p. 526)
decide whether you agree or disagree with each one. retro-reflector (p. 530)
apparent depth (p. 535)
mirage (p. 537)
dispersion (p. 538)
air
water
1 This diagram accurately shows light

passing from air into water.
4 Athanswimming pool is always deeper
it appears.
air glass
2 Light can be both reflected and

transmitted when it travels from air
5 Inbeorder to see a rainbow, the Sun must
shining in one part of the sky while
into glass. rain or clouds are in the opposite part
Agree/disagree? of the sky.
Agree/disagree?
BIG Ideas
3 Aallows
periscope is an optical device that
you to see around corners.
6 When you see a mirage, you are
really looking at an image of the sky.
be manipulated with
Agree/disagree? Agree/disagree? range of uses.
a range of optical devices
and technologies.

CHAPTER
REVIEW
12
What Do You Remember? What Do You Understand?

1. What is the procedure for measuring the 10. Figure 2 represents a beam of light travelling in
angle of refraction? Include a diagram in your two different media. (12.4) K/U
answer. (12.1) K/U C

(a) Which medium has the higher index of
2. Light bends toward the normal when going from refraction?
material A into material B. Compare the speed of (b) In which medium will light travel slower?
light in the two materials. (12.1) K/U (c) Why did you not need to know in which
3. Light slows down as it travels into a second direction the light was travelling to answer
medium. Which way is the light bending, the first two questions?
if at all? (12.1) K/U
4. Four materials have indices of refraction of 1.72,

1.00, 2.30, and 1.50. Which material will refract
light the most? Why? (12.4) K/U medium A
5. What is the angle of refraction at the critical

medium B
angle? (12.5) K/U
6. A certain substance has a critical angle of

24.5°. What minimum angle of incidence, to
the nearest tenth of a degree, will result in total Figure 2
internal reflection? (12.5) K/U
11. A beam of light is travelling from air into

7. When you see an object under water, how does
glass. Would refraction still occur if light
the apparent depth of the object compare with
travelled at the same speed in air and in glass?
the actual position of the object? (12.7) K/U
Explain. (12.1) K/U
8. In your own words, describe how a rainbow

12. Periscopes could be made with mirrors. They
forms. (12.7) K/U
are, however, usually made with right-angled

9. Figure 1 shows a light ray striking a prisms. (12.5) K/U A
window. (12.1, 12.5) K/U T/I C

(a) How can prisms behave like mirrors?
(a) Copy the diagram into your notebook. Draw (b) Why are prisms usually used instead of
the path of the light ray through the window. mirrors?
(b) Explain why the light ray behaves as it does 13. What type of image is a rainbow? Explain.
in the glass. (12.7) K/U
(c) Will the angle of refraction ever reach 90°?

14. A shimmering pool of water on the road is often
Explain.
visible just after hot asphalt has been laid. With
window
the aid of a diagram, explain why this is so.
(12.7) A C
air Solve a Problem

15. The speed of light in carbon disulfide is
1.84 × 10⁸ m/s. Calculate the index of refraction
for carbon disulfide. (12.4) T/I
16. The speed of light in arsenic trisulfide glass is

1.47 × 10⁸ m/s. What is the index of refraction
Figure 1
for this medium? (12.4) T/I

17. What is the index of refraction for fluorite if 24. In this chapter, you learned about invisibility cloaks.
light travels at a speed of 2.10 × 10⁸ m/s in (a) Form an opinion on whether you think
fluorite? (12.4) T/I
science and technology always produce
18. The index of refraction for vegetable oil is 1.47. beneficial products.
Determine the speed of light in vegetable oil. (b) What are some potential applications or uses
(12.4) T/I of an invisibility cloak? Evaluate each use in
19. Heavy flint glass has an index of refraction terms of its benefit to society.
of 1.65. What is the speed of light in this (c) Do you think the creation of an invisibility
medium? (12.4) T/I cloak is a good idea? Explain.(12.6) A
20. Zircon has an index of refraction of 1.92.

Determine the speed of light in zircon. (12.4) T/I
25. A knowledge of science can lead to a greater
Create and Evaluate understanding of nature.
21. The direction of light in a fibre-optic cable is (a) How did your knowledge of refraction give
constantly changing throughout the entire length you greater insight into the production of
of the cable. (12.5) T /I A certain atmospheric phenomena?
(a) How can this be when you know that light (b) Did this extra knowledge enhance or change
travels in straight lines? the way you look at fairly common events
(b) Research the advantages of fibre-optic cable such as shimmering or the formation of
over copper cable. mirages or rainbows? Explain.
22. Create a t-chart similar to Figure 3. In your chart,
compare a mirage with a rainbow. (12.7) K/U Web Connections
26. Research the historical methods used to measure
the speed of light by Foucault and others. Present
your research orally or in written form. T/I C
27. It is often possible to see two rainbows formed

at the same time. Sometimes it is even possible
to see three rainbows on top of one another.
Research how secondary and tertiary (the third
bow) rainbows are formed. Prepare an illustrated
presentation of your findings. T/I C
Figure 3 28. The rear-view mirror inside a vehicle can be

used for both daytime and nighttime driving.
23. You are having a disagreement with your brother Research how this mirror works so that shifting
at a swimming pool. A puck has been thrown its position for night driving still allows images
in the water and is resting at the bottom of the to be formed, but with a great reduction in glare.
deep end. Your brother wants to dive directly at Write a short article, with diagrams, for the
the puck in order to retrieve it. You tell him that motoring section of your local paper. T/I C A
the puck is not really where it appears to be. He

wonders how this can possibly be. Defend your
statement with an explanation of why the puck
is not where it appears to be. Your explanation
should state where your brother should dive.
Present your explanation orally, in written form,
or as a diagram.(12.7) A C
To do an online self-quiz and for

all Nelson Web Connections,

CHAPTER
SELF-QUIZ
12
For each question, select the best answer from the four Indicate whether each statement is TRUE or FALSE. If you
alternatives. think the statement is false, rewrite it to make it true.
1. As light passes from air into water, 5. Light travels faster in cool air than in warm air.
(a) the light bends toward the normal. (12.7) K/U
(b) the light bends away from the normal. 6. The legs of someone standing in water appear to
(c) the light continues on a straight path and be longer than they actually are. (12.7) K/U
does not bend.

(d) the light is completely reflected off the 7. When light refracts, it changes direction as it
surface of the water. (12.1) K/U travels from one medium into another. (12.1) K/U
2. The index of refraction for glass is 1.52. What is

the speed of light in glass? (12.4) K/U
(a) 1.52 × 108 m/s the sentence.
(b) 1.97 × 108 m/s
(c) 3.00 × 108 m/s 8. If the _________ of a light ray passing through
(d) 6.57 × 108 m/s water is greater than the critical angle for water,
the resulting light ray will reflect back into the
3. You see a submerged seashell that you want to water. (12.5) K/U
bring home for your collection. Which statement

correctly describes where you should place your 9. Triangular prisms are more useful in optical
net in order to pick up the shell? (12.7) K/U
devices than mirrors because these prisms
_________ almost 100 % of the light internally.
(a) Place the net directly above the image of the
(12.5) K/U
shell in the water.

(b) Place the net directly behind the image of the 10. The index of refraction for a given medium is
shell in the water. a _________ quantity because it has no units.
(c) Place the net directly in front of the image of (12.4) K/U
the shell in the water.

(d) Place the net directly below the image of the Match each term on the left with the most appropriate
shell in the water. description on the right.
4. Which condition must be true for total internal 11. (a) index of (i) the result of white light
reflection to occur? (12.5) K/U
refraction passing through a prism
(b) mirage (ii) the process that makes a
(a) The light ray must bend toward the normal.
(c) dispersion diamond sparkle
(b) The angle of reflection must equal the angle
(d) total internal (iii) the ratio of the speed of
of incidence.
reflection light in a vacuum to its
(c) The angle of incidence must be greater than
(e) retro-reflector speed in a medium
the critical angle.
(iv) a device used on road
(d) Light must be travelling faster in the first
signs to make them visible
medium than in the second.
at night
(v) an image that appears
to be a puddle of water
on the road at a distance
(12.4, 12.5, 12.7) K/U
544 Chapter 12 • The Refraction of Light

Write a short answer to each of these questions. 19. (a) White light slows down when it passes
12. Give an example in which light undergoes partial through a prism. Use what you know about
reflection and partial refraction at the same time. dispersion, refraction, and the colours of the
(12.1) K/U
visible spectrum to explain why the colours
that make up white light appear in a specific
13. You have learned that light travels in straight order as they exit the prism.
lines. You have also learned that light bends. (b) Would red laser light be dispersed if it
Explain why these two statements do not passed through a prism? Why or why not?
contradict each other. (12.1) K/U T/I
(12.7, 11.3) T/I
14. Look at the indices of refraction in Table 1. 20. Would you be able to see a rainbow in the sky
Table 1 Indices of Refraction for Three Media during a rainstorm if there were clouds between
Medium Index of Refraction you and the Sun? Why or why not? (12.7) T/I
A 2.30 21. (a) Name three devices that make use of total
B 1.76
internal reflection.
C 1.98
(b) Draw a diagram that illustrates the
Through which medium, listed in Table 1, does phenomenon of total internal reflection.
light pass Include arrows in your diagram that indicate
(a) fastest? the direction in which the light is travelling.
(b) slowest? (12.4) K/U
Also show the critical angle with a dashed
line. (12.5) K/U C
15. The speed of light in sulfuric acid at room

temperature is 2.11 × 108 m/s. What is the 22. Write a definition of “apparent depth” in your
index of refraction for sulfuric acid? Show your own words. (12.7) K/U C
calculations. (12.4) K/U

23. Your friend claims that mirages do not really
16. (a) How does the technology of fibre optics exist, and that if you try to take a picture of one,
make use of light? the mirage will not show up in the photo. Do
you think your friend is correct? Explain your
(b) Why is it important that a material used to
answer. (12.7) T/I
produce fibre optic cables have a very small

critical angle? (12.5) K/U 24. A company that installs a special coating on car
windows has hired you to market this product.
17. Suggest at least two uses for retro-reflectors in
This special coating allows the driver to see out,
your home. (12.5) A
but limits what others see when they look into
18. Consider how your eyes and brain interpret the car. Design an ad for this product showing
information to allow you to see the image how the coating works. (12.6) C A
of an object in a plane mirror. Compare this

process to the way your eyes and brain interpret
information to allow you to see an image that is
underwater. (12.7, 11.7) T/I
Chapter 12 Self-Quiz 545

CHAPTER
13 Lenses and Optical Devices
KEY QUESTION: How do lenses produce images,

and how do lenses benefit humans?
Water droplets can act as natural lenses.
546 Chapter 13 • Lenses and Optical Devices NEL

UNIT E
Light and
Geometric Optics

of Light
KEY CONCEPTS
A lens is a transparent Parallel light rays are Geometric optics can be

object used to change the refracted through a focus used to determine the
path of light. when they pass through a path of light rays through
converging lens. lenses.
Both ray diagrams and Lenses have many The eye can be treated
algebraic equations can technological uses that as a lens, and vision
be used to determine benefit humans. problems can be
the characteristics of an corrected with other
image in a lens. lenses.

ENGAGE IN
SCIENCE
Lord of the Flies is a well-known novel by William Golding. The

story describes the actions of a group of British schoolboys who
have been stranded on an island. A key part of the story
concerns a boy named Piggy. Piggy is near-sighted,
and wears glasses to correct his vision. He uses the
lenses of his glasses to start a fire. The schoolboys
hope that the fire will be noticed and that they
will be rescued.
Piggy’s use of his glasses to concentrate light is
an application of lenses. But is Piggy’s use of his
glasses scientifically correct? Would he really be
able to start a fire with glasses designed to correct
near-sightedness?

WHAT DO YOU
THINK?
card
object
lens
1 Aandcamera lens produces images that are upside down

flipped horizontally.
4 Ifwillyouseecover up half of an object, then the image that you
through a lens will be only half of the object.
C13-F03-UDOS10SB.ai
2 Ifseeyoubetter.
are near-sighted, then thick lenses will help you
5 Ait forms
magnifying glass is very similar to a microscope in how
an image.
0-17-635528-6
FN card C13-F03-UDOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 2nd pass
Approved
Not Approved
object
lens
3 Ifseeyouthrough
cover up half of a lens, then the image that you will
the lens will be only half of the object.
6 Many people require glasses for reading as they age
because the ability of the eye to focus decreases
Agree/disagree? with age.
Agree/disagree?
C13-F02-UDOS10SB.ai
FOCUS ON
WRITING
Writing a Critical Analysis
When you write a critical analysis, you examine an issue in depth
WRITING TIP
by raising questions about the accuracy and consistency of the
As you work through the chapter, information and the reliability of the sources, and then make a
judgment or recommend a course of action. Use the strategies
listed next to the text to improve your critical writing.
Is Laser Eye Surgery Appropriate For My Friend?

My friend is constantly mentioning how the look of her glasses bothers
First paragraph establishes the her and that they are inconvenient to wear when she plays sports.
context of your critical analysis.
With laser eye surgery, my friend would no longer have to wear glasses.
She could stop worrying about how she looks wearing glasses and would Second paragraph narrows
be able to play sports more comfortably. the topic to a specific detail.
During my research, I discovered several different companies that claim

histories of successful laser eye surgeries. The companies advertising
Conduct research to collect
a range of viewpoints on
“great deals” caused me to worry that they are having Ask questions about
the issue. trouble finding clients. important information that
is omitted or is inconsistent.
I also learned from my research that being able to see upon waking, not
having to wear glasses or contact lenses, and improved personal safety are
all benefits of the surgery. These benefits all contributed to a majority of
people saying their quality of life had improved because of the surgery.
Loss of night vision seems to be a concern with my parents’ friends.

Determine your position One neighbour says she has trouble seeing at night since her surgery.
on the issue and whether This concern may no longer be valid because she had the surgery 10 years
it is consistent with other
people’s perspectives.
ago when it first started to become popular. Technology has come a long
way since then.
After researching the issue, I have come to a decision that if my friend

finds a reputable company to perform the surgery, laser eye surgery is Make a judgment or
appropriate for her. propose possible strategies,
alternatives, or solutions.

Lenses and the Formation of Images 13.1
We see the world through lenses. This is certainly true for those of us who
wear glasses or contact lenses. Even if you do not require any vision aids, you
still see the world through the lenses in your eyes. In this chapter, you will
explore how lenses form images and how lenses are used in our society.
Basic Lens Shapes

Lenses consist of two basic shapes. The first is a converging lens, so named converging lens a lens that is thickest
because parallel light rays converge through a single point after refraction in the middle and that causes incident
parallel light rays to converge through
through the lens (Figure 1). The converging lens is thickest in the middle a single point after refraction
and thinnest at the edge.
(a) (b)
Figure 1 A converging lens brings refracted rays together through a single point.
The second kind of lens is a diverging lens. In a diverging lens, parallel diverging lens a lens that is thinnest
light rays diverge after refraction from the lens (Figure 2). A diverging lens in the middle and that causes incident
parallel light rays to spread apart after
is thinnest in the middle and thickest at the edge. refraction
C13-F04-UDOS10SB.ai
10SB
up
e (a) (b)
Figure 2 Light rays spread apart after refraction in a diverging lens.
C13-F05-UDOS10SB.ai
NEL 13.1 Lenses and the Formation of Images 551
Simplifying the Path of Light Rays
Through a Lens
In a lens, light is refracted at the first air to glass surface. Light then travels
through the glass of the lens and is refracted again at the glass to air surface
on the other side. This means that there are always two refractions in a
lens. We are, however, concerned only with the direction of the incident ray
entering the lens and the ray leaving the lens. Ray diagrams can be greatly
simplified by drawing a dashed vertical line through the centre of the lens
and showing refraction occurring at this line. The central line is a reference
point and shows light being refracted only once (Figure 3). It is used as a
shortcut for both converging and diverging lenses.
actual path shortcut
(a) (b)
Figure 3 By drawing one refracted ray at the central dashed line of a lens, you can greatly simplify
ray diagrams.
The Terminology of Converging Lenses

optical centre point at the exact centre The centre of the lens is called the optical centre (O). The line through the
of the lens optical centre that is perpendicular to the central dashed line of the lens is
the principal axis (similar inC13-F06-UDOS10SB.ai
purpose to the principal axis in curved mirrors).
Light rays parallel to the principal axis converge through a single point on the
principal focus the point on the principal principal axis called the principal focus (F). Light can strike the lens from
axis of a lens where light rays parallel to either side, and both sides of the lens can focus parallel light rays. To tell them
the principal axis converge after refraction
apart, the focus that is on the same side of the lens relative to the incident rays
is usually labelled as the secondary principal focus (F ʹ) (Figure 4).
0-17-635528-6
FN optical centre
C13-F06-UDOS10SB
CO CrowleArt Group
Deborah Crowle
O
Pass 1st pass principal axis
F F
Approved secondary principal focus principal
Not Approved focus
Figure 4 Terminology for a converging lens

The Terminology of Diverging Lenses
Light rays parallel to the principal axis of a diverging lens do not converge.
Instead, the refracted rays spread apart. If you project these diverging rays
backwards, it looks as if they come from a virtual focus. This point is now
the principal focus (F). The secondary principal focus (F ʹ) is now on the
other side of the lens, where the rays actually diverge (Figure 5). Note that
F and F ʹ are equally far apart from the optical centre of both a converging
lens and a diverging lens.
You will examine how these terms relate to images in these two kinds of
lenses when you do Activity 13.2.
optical centre
O
principal axis
F F
principal focus secondary
principal focus
Figure 5 Terminology for a diverging lens
IN SUMMARY
• A converging lens brings parallel light rays • The principal focus of a converging lens is on
together through a focus after refraction. the opposite side of the lens as the incident rays.
C13-F08-UDOS10SB.ai
• A diverging lens spreads parallel light rays apart • The principal focus of a diverging lens is on the
after refraction so that it looks as if they have same side of the lens as the incident rays.
come from a virtual focus.
CHECK YOUR LEARNING

1. Why is a knowledge of lenses important even if you do not 4. Can a converging lens have more than one focus?
require glasses? A Explain. K/U
Science 10 SB 2. What is the difference between a converging lens and a 5. You are given two lenses, a converging lens and a
528-6 diverging lens? Mention the paths of light rays in your diverging lens. Can you tell them apart just by feeling their
explanation. K/U
C13-F08-UDOS10SB shape? Explain. K/U
CrowleArt3.Group
(a) How many refractions actually occur as a light ray 6. (a) On what side of a converging lens is the principal
Deborah Crowle travels through a lens? Identify the locations of these focus located? Explain.
1st pass refractions on a diagram. (b) Where is the principal focus of a diverging lens
d (b) Why is it possible to simplify the number of actual located?
refractions in a lens down to one refraction at a (c) Why is a diverging lens different from a converging
oved
central line through the optical centre? K/U lens? K/U
NEL 13.1 Lenses and the Formation of Images 553

Locating Images in Lenses SKILLS MENU

Lenses are used in many optical devices such as cameras and eyeglasses. Hypothesizing Observing
In this activity, you will examine the images produced in converging Planning Evaluating
and diverging lenses. Remember to pay particular attention to the four Controlling Variables Communicating
characteristics of images: size, attitude, location, and type (SALT).
Purpose 4. Mark these same positions on the opposite side

To explore the characteristics of images produced by of the lens, but mark them as F ʹ (secondary
converging and diverging lenses. principal focus) and 2F ʹ respectively.
Part B: Locating Images in a

Converging Lens
• converging lens with support
5. Place a lit candle at these five positions:
• diverging lens
beyond 2F ʹ, at 2F ʹ, between 2F ʹ and F ʹ, at F ʹ,
• metre stick with two supports and between F ʹ and the lens. Move the paper
• candle with holder screen back and forth until you locate an image.
• paper screen and holder Figure 1 shows the setup for this procedure.
Describe the characteristics of each image (size,
• second sheet of paper or a small piece of
attitude, location, and type) that you were able
cardboard
to locate. Use 2F ʹ and F ʹ as reference points
• chalk that can be easily erased when describing the image location. Record your
observations in a table similar to Table 1.
Procedure
SKILLS HANDBOOK
1.B., 3.B. Note that you may need assistance from your
Part A: Locating Reference Positions teacher for the last two object locations: at F ʹ
for a Converging Lens and inside F ʹ.
1. Place the two metre stick supports under the When using a candle, tie back long hair and loose clothing.
ends of the ruler. Place a piece of paper under the candle to catch any
2. Place the converging lens in the lens support and falling wax.
place the lens and lens support in the middle of Be careful when moving the candle—the wax is hot.
the ruler (at the 50 cm mark).
Table 1 Image Characteristics in Lenses
3. Aim the metre stick–lens assembly at a relatively
distant object that is transmitting external light Object Size of Attitude Location Type of
in the classroom when the lights have been location image of image of image image
turned off. Suitable objects are the slats of an beyond 2F ʹ

open window blind, a window frame, or a door at 2F ʹ
frame in a room with a window. Make sure that
you are as far away as possible from this distant between
2F ʹ and F ʹ
object. Move the sheet of paper back and forth
behind the lens until you see as sharp an image at F ʹ
of the distant object as possible. Mark this
inside F ʹ
location on the ruler as F (principal focus). Also,
mark in twice this distance (2F) from the lens.
paper screen
lens
source
image
Figure 1
6. Move the candle back to its original position (d) Where must an object be located for a
beyond 2F ʹ. Now cover half of the lens with the converging lens to produce a virtual image? T/I
second piece of paper or cardboard. Locate and (e) What were the characteristics of the image in the
describe the image. diverging lens for all object locations? T/I
7. Move the second piece of paper or cardboard to (f) Why did you not have to follow the same
cover half of the flame. Locate and describe the procedure for the diverging lens as you did for
image. the converging lens? T/I
(g) Why were you still able to see the object when
Part C: Locating Images in half of the lens was covered? Why was the
a Diverging Lens brightness of the image reduced? T/I
8. Replace the converging lens with a diverging (h) Why did you lose half of the image when you
lens. Attempt to find an image on the screen. covered half of the object? T/I
Now look into the diverging lens, locate

the image of the candle, and describe its
characteristics. Move the lens back and Apply and Extend
forth to see if there is any change in image (i) List some optical devices that use a lens to
characteristics. Record your observations. produce a real image. A
(j) Name an optical device that uses a lens to

Analyze and Evaluate produce a larger, virtual image. A
(a) Where must an object be located for a (k) Suppose F for a converging lens is 23 cm,
converging lens to produce a real image? T/I and a luminous source is placed at different
positions in front of the lens. Predict the image
(b) What happened to the size of the real image as
characteristics for each position. T/I
the object was slowly moved toward the lens

from its original position beyond 2F ʹ?T/I • 64 cm from the lens
(c) What was the only location where the • 40 cm from the lens
converging lens did not produce an image? T/I • 10 cm from the lens

13.3 Images in Lenses
In Activity 13.2, you noticed that two things affect the characteristics of the
image formed: the kind of lens (converging or diverging) and the location
of the object. You can determine the image characteristics by drawing ray
diagrams, just as you did with converging and diverging mirrors. As before,
you need to draw only two light rays to locate the image. The only difference is
that with mirrors you considered reflected rays, but with lenses you consider
refracted rays.
In order to understand how to draw ray diagrams for lenses, it is important
to understand how the incident and emergent rays are related to each other.
emergent ray the light ray that leaves The emergent ray is the ray that leaves the lens, being refracted as it goes from
a lens after refraction the lens back into air. Find out about their relationship by doing the activity
“Exploring the Rectangular Prism.”
T RY THIS EXPLORING THE RECTANGULAR PRISM

SKILLS HANDBOOK
SKILLS: Predicting, Performing, Observing, Analyzing 1.B., 3.B.
Equipment and Materials: ray box; single-slit mask; 3. Aim the light ray at the prism so that you can see an
rectangular prism; blank sheet of paper emergent ray on the other side of the prism. Carefully
examine how the incident ray and the refracted ray are
1. Lay the rectangular prism on its large flat face in the middle
positioned relative to each other. (If you notice another ray
of the sheet of paper.
going between the prism and the paper, press down on the
When handling the glass prism, take care not to cut your prism slightly.)
fingers if it is chipped.
4. Now place the prism on its thin side and repeat step 3.
2. Use the ray box and the single-slit mask to produce
A. How did the rectangular prism on its large flat surface affect
a light ray.
the emergent ray? T/I
When unplugging the ray box, do not pull the electric cord. B. What changed when you laid the prism on its thin side? T/I

C. How would the incident ray and the emergent ray compare
if you had used an extremely thin rectangular prism? T/I
D. If a very thin rectangular prism is available, test your
prediction by repeating this experiment. T/I
You can use a rectangular prism to understand how a lens works. An

incident ray directed at a rectangular glass prism undergoes two refractions.
The first is at the air–glass boundary as the ray enters the prism. The second
is at the glass–air boundary when the ray emerges from the prism. In a
rectangular prism, these two boundaries are parallel because the two surfaces
of the prism are parallel to each other. So the emergent ray is parallel to the
incident ray but displaced sideways. The amount of sideways displacement
depends on the thickness of the prism (Figure 1).

very little Figure 1 The emergent ray through
(a) (b) sideways a rectangular prism is parallel to the
displacement incident ray but displaced sideways.
noticeable Reducing the width of the prism greatly
sideways reduces the amount of sideways
displacement displacement.
A very thin rectangular prism results in very little displacement of the

emergent ray (Figure 1(b)). If the prism is thin enough, the emergent ray
appears to be almost unaffected by the presence of the prism. This fact is
important when considering images formed by converging lenses.
How to Locate the Image

in a Converging Lens
The three imaging rules for converging lenses are shown in Figure 2.
1 A ray parallel to the principal axis is

refracted through the principal focus (F ).
1
2 A ray through the secondary principal
optical centre focus (F ) is refracted parallel to the
2
principal axis principal axis. This rule comes from the
reversibility of light.
2F  F O F 2F
3 A ray through the optical centre (O)
continues straight through without being
3 refracted. This is true because the middle
F   secondary principal focus F  principal focus
part of the lens acts like a very thin
rectangular prism with no noticeable
sideways displacement.
Figure 2 Imaging rules for a converging lens
Note that these rules are true only for thin lenses. We will only discuss
thin lenses in this chapter.
Images in a Converging Lens

C13-F12-UDOS10SB.ai
You can investigate the images formed by a converging lens. If you place a
luminous source at a distance greater than 2F ʹ, you can locate an image of
this source by moving a paper screen back and forth on the other side of the
lens. The image is smaller, inverted, and located somewhere between F and
2F. This image is real. Light is actually arriving at the image location, and
you can see the image on a paper screen.
0-17-635528-6
FN C13-F12-UDOS10SB
CO CrowleArt Group
NEL
Deborah Crowle 13.3 Images in Lenses 557
Pass 2nd pass
WRITING TIP Using the imaging rules for a converging lens, you can show how the lens
Writing a Critical Analysis produced this image. You can also predict how the lens produces images for
Imagine that you are writing a critical other object locations (Figure 3).
analysis of a camera that has a lens
with a fixed focal length. You might refer - smaller
to the imaging rules for converging - inverted
- between F and 2F
lenses in the first paragraph to set the object - real
context for your analysis. beyond
2F 2F F F 2F
(a)
- same size
- inverted
- at 2F
object - real
at
2F 2F F F 2F
(b)
- larger
- inverted
- beyond 2F
object - real
between
F and 2F 2F F F 2F
Figure 3 A converging lens (c)
produces a real image for these
three object locations.
READING TIP When an object is located beyond 2F ʹ, the image is smaller than the
Making Connections object and is between 2F and F. As you slowly move the object toward the
Compare Figure 4 on this page with lens, the image gets larger and larger. Eventually, the image and the object
the three diagrams for the concave are the same size when the object is located at 2F ʹ; the image is now at 2F.
mirror in Figure 6 in Section 11.9 on If you continue moving the object between 2F ʹ and F ʹ, you get a larger
page 497. Examine how the image image than the object; the image is now outside 2F. Note that for all these
characteristics are related.
image positions, the image is always inverted and real.
When you move the object to the secondary principal focus (F ʹ), no image
is produced. The refracted rays are parallel and do not cross to form an
image (Figure 4). Even if you extend the rays backwards, there is no virtual
image. The reason is that the rays are parallel and do not form a virtual source.
no clear image formed

(emergent rays are parallel)
2F  F F 2F
Figure 4 No image is produced when

an object is at F ʹ.

No real image is produced when the object is between F ʹ and the lens. The
refracted rays spread apart or diverge. However, the human brain projects these
rays backwards and produces a virtual image behind the object (Figure 5).
(Note that virtual images are often described as being behind the lens because
light rays do not actually arrive at the image location; they only appear to.)
• larger
• upright
• behind the lens
• virtual
2F  F F 2F
Figure 5 A larger, virtual image is produced on the same side as the object when the object
is between F' and the lens.
Table 1 summarizes the image characteristics in a converging lens.
Table 1 The Imaging Properties of a Converging Lens

OBJECT IMAGE
Location Size Attitude Location Type
C13-F15-UDOS10SB.ai
beyond 2F ʹ smaller inverted between 2F and F real
at 2F ʹ same size inverted at 2F real
between 2F ʹ and F ʹ larger inverted beyond 2F real
at F ʹ no clear image
inside F ʹ larger upright same side as object (behind lens) virtual
How to Locate the Image in

a Diverging
Ontario Science 10 SB Lens
The imaging rules for a diverging lens are similar to those for a converging
0-17-635528-6
FN lens. The only difference is that light rays do not actually come from the
C13-F15-UDOS10SB
CO principal focus (F); theyGroup
CrowleArt only appear to (Figure 6).
Deborah Crowle 1 A ray parallel to the principal axis is
Pass 2nd pass refracted as if it had come through
Approved the principal focus (F ).
Not Approved 2 A ray that appears to pass through

1 1 A ray the
parallel to the principal
secondary principal axis
focusis (F' )
2 optical centre refracted as if it had
is refracted cometothrough
parallel the principal axis.
the principal focus (F ).
3 A ray through the optical centre (O )
2 A ray continues
that appears to pass
straight through
through on its path.
2F F O F 2F 
1 the secondary principal focus (F' )
2 optical centre is refracted parallel to the principal axis.
3 3 A ray through the optical centre (O )

F  principal focus O F   secondary principal focus continues straight through on its path.
2F F F 2F 
Figure 6 Imaging rules for a diverging lens
3
F  principal focus F   secondary principal focus
NEL 13.3 Images in Lenses 559
Images in a Diverging Lens
A diverging lens always produces the same image characteristics no matter
where the object is. The image is always smaller, upright, virtual and on the
To investigate lenses by using same side of the lens as the object (Figure 7). The human brain perceives
computer simulations, this virtual image by extending the diverging rays backwards to a virtual
GO TO NELSON SCIENCE source.
• smaller
• upright
• same side as object
• virtual
2F F F 2F 
Figure 7 A diverging lens always forms a smaller, upright, virtual image that is on the same side of
the lens as the object.
UNIT TASK Bookmark

How can you use the image characteristics of lenses as you plan your optical device for the
Unit Task described on page 588? C13-F17-UDOS10SB.ai
IN SUMMARY
• A converging lens produces both real and virtual • A diverging lens always produces a smaller,
images. The image size and attitude will vary upright, virtual image.
depending
Ontario onSB
Science 10 the location of the object.
0-17-635528-6
FN C13-F17-UDOS10SB
CO CrowleArt Group
Deborah Crowle
Pass 2nd pass
Approved
Not Approved

CHECK YOUR LEARNING
1. (a) In your own words, state the imaging rules for 4. Copy Figure 10 into your notebook. T/I C
converging lenses. (a) A screen is used to cover half of the lens (Figure 10(i)).
(b) How are these rules slightly different for diverging Use light rays to locate the image on the diagram.
lenses? K/U (b) A screen is used to cover half of the object (Figure 10(ii)).
2. Copy Figure 8 into your notebook. T/I C
Use light rays to locate the image on the diagram.
(a) Add light rays to the diagrams to locate the image
for each object. screen
(b) Describe the image characteristics for each object.

(i)
2F  F F 2F
(i)
2F  F F 2F
screen
(ii)
2F  F F 2F
(ii)
2F  F F 2F
Figure 10
5. Why does a diverging lens never produce a real

image? K/U
6. How is the virtual image produced by a converging lens
(iii) different from the virtual image produced by a diverging
2F  F F 2F
lens? K/U
7. Write a general statement that is valid for both kinds of
C13-F20-UDOS10SB.ai
lenses that summarizes the relationship between the type
and the attitude of the image. K/U T/I
(iv) 8. When you watch a movie projected onto a screen, you are
2F F F 2F  seeing an image. Traditional-style movie projectors include a
light and a lens to project the picture onto the screen. T/I C
Figure 8 Ontario Science 10 SB (a) What type of lens is used in the projector? Explain.
0-17-635528-6 (b) Draw a ray diagram that includes the film (the object),
FN C13-F20-UDOS10SBthe lens, and the image on the screen.
3. Copy Figure 9 into your notebook. Use light rays to
CO CrowleArt Group
(c) Describe the characteristics of this image.
locate F. T/I C C13-F18-UDOS10SB.ai
Deborah Crowle
object
Pass 1st pass
Approved
Not Approved
image
Figure 9
e 10 SB
C13-F18-UDOS10SB
CrowleArt Group
Deborah Crowle
1st pass
C13-F19-UDOS10SB.ai
NEL 13.3 Images in Lenses 561
13.4 The Lens Equations
There are two ways to determine the characteristics of images formed by
lenses. You can use either ray diagrams or algebra. You used ray diagrams in
the previous section. In this section, you will use algebra to determine the
image characteristics.
Lens Terminology
Figure 1 illustrates some variables that we must first define:
do = distance from the object to the optical centre
di = distance from the image to the optical centre
ho = height of the object
hi = height of the image
f = focal length of the lens; distance from the optical centre to the
principal focus (F)
Note that the focal length ( f ) is the same distance whether it goes to F or F ʹ.
do f
ho object
2F
2F  F C13-F21-UDOS10SB F image
hi
f di
Figure 1 An illustration of the variables do, d i, ho, hi, and f
The Thin Lens Equation

There is a very useful equation that relates the focal length (f ), the object
distance (do), and the image distance (di).
C13-F21-UDOS10SB.ai
1 + __
1 = __
1 is called the thin lens equation.
thin lens equation the mathematical The equation __
do di f
relationship among do, di, and f ;
1 + __
__ 1 = __
1 To use the thin lens equation, you need to follow this sign convention:
do d i f
• Object distances (do) are always positive.
• Image distances (di) are positive for real images (when the image is
Ontario Science 10 SB on the opposite side of the lens as the object) and negative for virtual
0-17-635528-6 images (when the image is on the same side of the lens as the object).
FN C13-F21-UDOS10SB• The focal length ( f ) is positive for converging lenses and negative for
CO CrowleArt Group diverging lenses.
Deborah Crowle
The thin lens equation was originally derived with the help of a diagram
Pass 2nd pass
similar to Figure 2. You do not need to be able to derive the equation
Approved
yourself, but you might be interested in how it was done.
Not Approved

B A
ho object
O F D
C F
hi image
do di
Figure 2 Diagram to derive the thin lens equation
___ AO
ED = ___ ∆EDF and ∆AOF are similar (angle–angle similarity).
DF OF
h
____
h
i
= __o
di – f f
h
hi = __o (di – f ) Rearrange the equation to get hi on the left side.
f
h d
__i = ____
i
–f
ho f C13-F22-UDOS10SB.ai
h d
Since __i = __i ∆EDO and ∆BCO are similar (angle–angle similarity).
ho do
d di – f d h
Therefore, __i = ____ Substitute __i for __i .
do f do ho
di __ d
__
Ontario Science = i – _f
do 10f SBf
0-17-635528-6
1 = __
__ 1 – __
1 Now divide both sides by di and rearrange the equation.
FN do C13-F22-UDOS10SB
f di
CO 1 =CrowleArt
1 + __
__ 1
__
Group
do di Deborah
f Crowle
Pass Let's look at2nd
some problems that can be solved by using the thin lens equation.
pass
Approved
Not Approved
SAMPLE PROBLEM 1 Using the Thin Lens Equation for a Converging Lens
SKILLS HANDBOOK
5.D.
A converging lens has a focal length of 17 cm. A candle is located 48 cm from the lens
(Figure 3). What type of image will be formed, and where will it be located?
Given: f = 17 cm do = 48 cm
do = 48 cm object F
Required: di = ? F image
1 + __
Analysis and Solution: __ 1 = __
1 f = 17 cm di = ?
do di f
1 = __1 – __
1 Figure 3
__
di f do
1 = _____
__ 1 – _____
1
di 17 cm 48 cm
1 =· 0.038 cm–1
__
di
di =· 26 cm
Statement: The image of the candle is real and will be about 26 cm from the lens, opposite the object.
NEL 13.4 The Lens Equations 563

The thin lens equation applies equally well to a diverging lens (Figure 4).
do do f f
d i =dnegative
i = negative
for virtual
for virtual
image
image
f = negative
f = negative
for diverging
for diverging
lenslens
ho ho object
object
image h i h i
image
2F 2F F F F F 2F  2F 
di di
f f
Figure 4 Lens equation variables for a diverging lens
SAMPLE PROBLEM 2 Using the Thin Lens Equation for a Diverging Lens
A diverging lens has a focal length of 29 cm. A virtual image of a marble is located 13 cm
in front of the lens (Figure 5). Where is the marble located?
do = ?
Given: f = −29 cm C13-F42-UDOS10SB.ai
C13-F42-UDOS10SB.ai
di = −13 cm
Required: d0 = ?
object
F image
Analysis and Solution: 1 + __
__ 1 = __
1
dodi f
1 = __
__ 1 – __
1 d i = –13 cm
d0 f di
__ 1
1 = _______ 1
– _______
d0 −29 cm −13 cm f = –29 cm
1 =· 0.043 cm–1
__
Ontario
Ontario
Science
Science
10 10
SB SB d0 Figure 5
0-17-635528-6
0-17-635528-6 d0 =· 23 cm
FN FN C13-F42-UDOS10SB
C13-F42-UDOS10SB
Statement: The marble is located 23 cm from the lens, on the same side as the image.
COCO CrowleArt
CrowleArt
Group
Group
Deborah
Deborah
Crowle
Crowle
Pass
Pass 2nd2nd
pass
pass
Approved
LEARNING TIP
Approved The Magnification Equation
Does It Make Sense? C13-F43-UDOS10SB.ai
NotNot
Approved
Approved When you compare the size of the image with the size of the object, you are
A problem is not completed once determining the magnification of the lens. To derive the thin lens equation,
you have an answer. Stop for a h d
moment and reflect on your answer. it is important to use the relationship __i = __i . This relationship is used to
h do
Does it make sense given the obtain the magnification equation. o
situation in the problem? Is the h d
numerical value appropriate? The magnification equation can be stated as M = __i = – __i .
Ontario Science 10 SB ho do
Do you have the correct units?
0-17-635528-6
The sign convention is the same as before, with two additions:
FN C13-F43-UDOS10SB
CO • Object (ho)Group
CrowleArt and image (hi) heights are positive when measured upward
from the Crowle
Deborah principal axis and negative when measured downward.
Pass • 1st
Magnifi
pass cation (M) is positive for an upright image and negative for an
Approved inverted image.
Not Approved The magnification (M) is a dimensionless quantity because the units
divide out.
Let's see how the magnification equation can be used to solve problems.
SAMPLE PROBLEM 3 Finding the Magnification of a Converging Lens

A toy of height 8.4 cm is balanced in front of a converging lens. object
An inverted, real image of height 23 cm is noticed on the other
ho = 8.4 cm
side of the lens (Figure 6). What is the magnification of the lens? image
Given: ho = 8.4 cm
hi = −23 cm M=?
h i = –23 cm
Required: M=?
h
Analysis and Solution: M = __i
ho
–23 cm
M = ______ Figure 6
8.4 cm
M =· –2.7
Statement: The lens has a magnification of –2.7.
SAMPLE PROBLEM 4 Locating the Image

A small toy building block is placed 7.2 cm in front of a lens. An upright, virtual image
of magnification 3.2 is noticed (Figure 7). Where is the image located?
Given: do = 7.2 cm C13-F44-UDOS10SB.ai
M = 3.2
Required: di = ?
d
Analysis and Solution: M = – __i
do image
–Mdo = di M = 3.2
di = –Mdo
object
Ontariodi =Science 10cm)
–(3.2)(7.2 SB
0-17-635528-6
di =· –23 cm
do = 7.2 cm
FN C13-F44-UDOS10SB
Statement: The image of the toy block is located 23 cm from
the same side as theCrowleArt
the lens, onCO object. Group di = ?
Deborah Crowle Figure 7
Pass 1st pass
Approved
The magnification equation also applies to diverging lenses.
Not Approved
SAMPLE PROBLEM 5 Finding the Magnification of a Diverging Lens

A coin of height 2.4 cm is placed in front of a diverging lens. An upright, virtual image
of height 1.7 cm is noticed on the same side of the lens as the coin (Figure 8). What is
the magnification of the lens? C13-F45-UDOS10SB.ai
Given: ho = 2.4 cm
hi = 1.7 cm
Required: M=? h o = 2.4 cm h i = 1.7 cm
hi
__
Analysis and Solution: M =
OntariohoScience 10 SB object image
1.7 cm
M = ______
0-17-635528-6 M=?
2.4 cm
FN M =· 0.71 C13-F45-UDOS10SB
COa magnification of CrowleArt
Statement: The lens has 0.71. GroupFigure 8
Deborah Crowle
NEL Pass 1st pass 13.4 The Lens Equations 565
Approved
Table 1 summarizes the sign conventions for lenses.
Table 1 Sign Conventions for Lenses
Variable Positive Negative
(object distance) do always never
(image distance) di real image (image is on virtual image (image is on
opposite side of lens as object) same side of lens as object)
(height of object) ho when measured upward when measured downward
(height of image) hi when measured upward when measured downward
(focal length) f converging lens diverging lens
(magnification) M upright image inverted image
IN SUMMARY
1 + __
1 = __
1 h d
• Thin lens equation: __ • Magnification equation: M = __i = – __i
do di f ho do
CHECK YOUR LEARNING

For each of these questions, draw a ray diagram to check 6. A playing card of height 14 cm is placed in front of a
your answer. converging lens. An inverted, real image of height 7.9 cm
1. A converging lens has a focal length of 23 cm. A frog is is noticed on the other side of the lens. What is the
32 cm from the lens. Use the thin lens equation to calculate magnification of the lens? T/I C
where the image of the frog will be located. T/I C 7. A postage stamp of height 2.8 cm is placed in front of a
2. A pencil is located 53 cm from a diverging lens. An upright, diverging lens. A virtual image of height 1.3 cm is noticed
virtual image of the pencil is observed 18 cm from the lens. on the same side of the lens as the stamp. T/I C
Use the thin lens equation to calculate the focal length of (a) What is the magnification of the lens?
this lens. T/I C (b) What is the attitude of the image?
3. A diverging lens has a focal length of 34 cm. An upright, 8. A small fork is placed 9.4 cm in front of a lens. An upright,
virtual image of a small booklet is located 13 cm behind virtual image of the fork with a magnification of 5.6 times is
the lens. Where is the booklet located? T/I C observed. K/U T/I C
4. A converging lens has a focal length of 16 cm. An insect is (a) Where is the image located?
located 11 cm from the lens. Where will the image of the
(b) What is the focal length for this lens?
insect be located? T/I C
(c) What kind of lens is this? Explain.
5. A vase of height 12 cm is placed in front of a converging
lens. An inverted image of height 35 cm is noticed on the
other side of the lens. T/I C
(a) Use the magnification equation to calculate the
magnification of the lens.
(b) What type of image is it ?

Lens Applications 13.5
Lenses make use of the phenomenon of refraction. Optical devices that
involve lenses have been used for centuries. These devices have benefitted
humans greatly and have often led to great advances in knowledge. In this
section, you will examine some of these optical devices.
The Camera
A converging lens produces an inverted, real image as long as the object is WRITING TIP
at a distance greater than F ʹ (the secondary principal focus). The camera is a Writing a Critical Analysis
good example of a device that makes use of this fact. Imagine that you are writing a critical
A camera takes light from large, distant objects and forms smaller, real analysis of a camera that has a lens
with a fixed focal length. You can
images on either film in a traditional camera or the sensor in a digital
conduct research on the advantages
camera (Figure 1). This means that the object must be located at more than and disadvantages of various types
twice the focal length of the lens (that is, beyond 2F ʹ). As the object changes of lenses: fixed focal length, zoom,
position, its image will change location. The location of the real image, interchangeable, and converter. Check
however, will be somewhere between F and 2F. You cannot move the film in for information that is missing or
inconsistent. Ask questions such as,
a camera back and forth to create a sharp image. So to compensate for the
“What is the key difference between
fixed position of the film, you move the lens in and out. That way, a sharp digital and optical zoom lenses?”
image always falls on the film. This is what is called “focusing.”
film or
digital
sensor
2F’ F’ F 2F
camera
housing
Figure 1 A camera produces a smaller, real image.
A traditional film camera uses flexible roll film

to capture images. Flexible roll film was invented by
George Eastman in 1884. Until that time, photographers
had used glass plates coated with light-sensitive
chemicals. George Eastman may not be a familiar name
today, but the company that he founded to sell his
products, Kodak, certainly is.
Today, digital cameras are far more popular than film
cameras. Instead of film, a digital camera uses a light-
sensitive device made of silicon called a charge-coupled
device (CCD) (Figure 2). CCDs are at the heart of many
other modern optical devices such as TV cameras,
0-17-635528-6 Figure 2 In a digital camera, a charge-coupled device (CCD)
medical imaging systems, telescopes, and certain kinds replaces the film found in a traditional camera.
of microscopes. C13-F23-UDOS10SB
FN
CO Allan Moon
Pass Final
Approved
NEL 13.5 Lens Applications 567
Not Approved
The Movie Projector
DID YOU KNOW? A movie projector is, in a sense, the opposite of a camera. A projector takes
Size Matters a small object (the film) and projects a large, inverted, real image on a screen
The IMAX film projection system was (Figure 3). Because the image is larger than the object, the film must be
developed in Canada. IMAX film is located between F ʹ and 2F ʹ. Also, because the image is inverted, the film must
10 times larger than regular 35 mm
be loaded into the projector upside down so that what you see on the movie
film and feeds through the projector
at three times the speed of other screen is upright. An overhead projector works in a similar way.
systems. The film canisters are so
large and heavy that the film runs movie screen
through the projector horizontally
rather than vertically.
film source
2F’ F’ F 2F
Figure 3 A projector produces a larger, inverted, real image.
Many theatres have upgraded to digital projection. The movies that these
digital cinemas show are no longer stored on film; they are instead stored
on DVDs or hard drives or are distributed to the theatre by direct satellite
transmission.
The Magnifying Glass

DID YOU KNOW? Probably the simplest optical device is the magnifying glass. It is a simple
The Oldest Magnifying Glass converging lens in which the object is located between F ʹ and the lens. No
The earliest recorded example of real image is produced at this object location. The refracted rays spread
using a magnifying glass to produce a apart or diverge. However, the human brain extends these rays backwards
magnified image comes from the Book
of Optics published by Ibn al-Haytham
and produces an enlarged, virtual image located on the same side of the lens
in 1021.
Ontario Science asSBthe object (Figure 4).
10
0-17-635528-6
FN C13-F24 -UDOS10SB
CO Allan Moon
Pass final
Approved
Not Approved
2F’ F’ F F 2F
(a) (b)
Figure 4 A magnifying glass is a converging lens that produces a larger,

upright, virtual image on the same side of the lens as the object.
568 Chapter 13 • LensesScience

Ontario and Optical
10 SBDevices NEL
0-17-635528-6
The magnifying glass is also called a simple microscope. Dutch scientist
Antonie van Leeuwenhoek became famous for his observations using simple
microscopes (Figure 5). Leeuwenhoek’s simple microscopes, however, had
one serious shortcoming. The converging lenses had very short focal lengths
and so had to be held very close to the eye, which led to a lot of eye strain.
The design of this simple microscope was improved and eventually led to
the compound microscope.
The Compound Microscope

The compound microscope is an arrangement of two converging lenses. It
produces two enlarged, inverted images: one real and one virtual. The real
Figure 5 Using a microscope like this,
image is formed by the objective lens. You do not see this image because it is van Leeuwenhoek was the first person
in the body tube of the microscope, between the objective and the eyepiece to observe bacteria and blood cells. The
lenses. The virtual image is formed by the eyepiece lens. This larger, virtual specimen was mounted on the tip of the
specimen holder in front of the lens.
image is the image that you actually see (Figure 6).
objective lens
object
real image F
F’
eyepiece lens Figure 6 A compound microscope

virtual produces two images. You see only the
image larger, virtual image.
The Refracting Telescope

A refracting telescope operates on the same principle as a compound
microscope. The difference is that the object is much farther away. In fact,
the object in a refracting telescope is so far beyond 2F ʹ that incident rays
passing through the objective lens are considered to be parallel. A refracting
telescope, like a compound microscope, produces two enlarged, inverted
images: one real image that you do not see (inside the tube of the telescope)
and one larger, virtual image that you do see (Figure 7).
eyepiece objective parallel rays

lens lens from distant object
io Science 10 SB
F F’
35528-6
C13-F26-UDOS10SB real
image
Allan Moon
3rd pass
Figure 7 A refracting telescope also
oved virtual produces two images. You see only the
pproved image larger, virtual image.
NEL 13.5 Lens Applications 569

Because of gravity, there is a size limit on refracting telescopes. If the
objective lens is too large, it will start to sag slightly under its own weight,
resulting in distorted images. The largest refractor in the world is the
Yerkes telescope (Figure 8). Its objective lens has a diameter of 1.02 m.
The image in a refracting telescope is inverted, which is not a problem
when viewing distant stellar objects. This can, however, be a problem when
you view objects on Earth. For this application, you need to use a terrestrial
telescope that has a third converging lens placed between the objective lens
Figure 8 This 1.02 m refracting telescope
at the Yerkes Observatory is the largest and the eyepiece. This extra lens corrects the inverted image so that you
refracting telescope in the world. always see an upright image in the eyepiece.
UNIT TASK Bookmark

You can apply what you learned about applications of lenses in this section to the Unit Task
IN SUMMARY
• A camera uses a converging lens to produce a • A compound microscope consists of two
smaller, inverted, real image of a large object; the converging lenses and produces a larger, inverted,
object is beyond 2F ʹ, and the real image is located virtual image. The object is located close to the
between F and 2F in the camera body. objective lens.
• A movie projector uses a converging lens to • A refracting telescope consists of two converging
produce a larger, inverted, real image of a small lenses and produces a larger, inverted, virtual
object; the object (the film strip) lies between F ʹ image. The object is so far away from the
and 2F ʹ, and the image is located beyond 2F. objective lens that incident rays that pass through
• A magnifying glass, or simple microscope, is a the lens are essentially parallel.
converging lens in which the object is located
between the lens and F ʹ. A larger, upright, virtual
image is formed on the same side of the lens as
the object.
CHECK YOUR LEARNING

1. What is the purpose of focusing in a camera? K/U 6. Why can you not see a real image in either a compound
2. Briefly describe three technologies that have been used microscope or a refracting telescope? K/U
to capture images in cameras. K/U 7. Use a t-chart to summarize the similarities and differences
3. (a) Why would the film strip in a movie projector never between a compound microscope and a refracting
be located beyond 2F ´? telescope. K/U C
(b) Where is the film strip actually located? Why? T/I
8. (a) Why is the refracting telescope not suitable for viewing
objects on Earth?
4. Why is the image that you see on the screen in a movie
theatre not inverted? K/U (b) How has this problem been overcome in the design
of the terrestrial telescope? K/U
5. Why must the object in a magnifying glass be located
between F ´ and the lens? K/U

SCIENCE OSSLT
The Einstein Ring

One of Albert Einstein’s predictions was that mass bends space. If the central gravitational lens is symmetrical, and if it
A large mass, such as a galaxy, should distort the space around is directly in front of another galaxy, then it acts like a perfect
it so much that it changes the path of light from galaxies behind converging lens. A complete circle of light from the distant galaxy
it. The large mass of the galaxy would, in effect, act like a large is visible instead of a smeared arc. This is called an Einstein ring
converging lens. The bending of light by a large mass is called (Figure 3). Several have now been observed.
gravitational lensing (Figure 1).
image of quasar actual quasar light

image light
quasar massive galaxy on its axis

Earth
image of quasar
Figure 1 The massive galaxy in front acts like a gravitational lens and
bends light from the distant galaxy (quasar) behind it.
For a long time, scientists did not know whether gravitational

lenses actually existed. Recent advances in imaging technology
have now provided conclusive evidence that gravitational lenses
do exist. The large smears and arcs of light in Figure 2 are
examples of gravitational lensing. The dense cluster of galaxies
in the foreground causes the smearing of light. The effect is
identical to the smearing of a light source caused by an off-centre,
irregularly shaped converging lens.
Figure 3 An Einstein ring photographed by the Hubble space

telescope
The universe is an astonishing and amazing place. It is

just as astonishing that concepts from optics can lead to an
understanding of some of these unusual physical phenomena!
Figure 2 The massive galaxy cluster in the foreground acts like a

converging lens. The result is that light from galaxies behind it is bent
into arcs.
NEL 571
13.6 The Human Eye
The human eye is the optical instrument that helps most of us learn about
the external world; it is what you are using to read this sentence. It is a
remarkable apparatus that acts as our window on the universe.
Parts of the Human Eye

DID YOU KNOW? “I am a camera with its shutter open, quite passive, recording, not thinking.”
Retina Cells This is the opening line from Christopher Isherwood’s 1939 novel Goodbye
The retina contains basically two kinds to Berlin. Isherwood’s opening line compares the eye to a camera as a
of light-receptive cells: rods and cones. recorder of events. Isherwood used the eye as an analogy, and the example
These cells are identified by their basic
of the eye as a camera is a good comparison.
shape. The cone cells allow you to see
colour. The rod cells are much more
The human eye is an amazing optical device that in many ways is very
sensitive to light and are predominantly similar to a camera. A camera has a diaphragm that controls the amount
for black and white vision. of light entering it. The diaphragm on a compound microscope has exactly
the same function. The iris in the eye has this function. The iris is the
coloured part of the eye, and it opens and closes around a central hole to
let in more or less light. The hole in the iris is called the pupil, comparable
WRITIng Tip to the aperture in a camera, and is where light enters the eye. A camera has
Writing a Critical Analysis a converging lens to refract light to form a sharp image. The eye also has
In a critical analysis of the human eye,
structures (the lens and cornea) that cause light to converge. The cornea is
you might comment on similarities
between its parts and those of a
the transparent bulge on top of the pupil that focuses light. Light is refracted
camera: pupil/aperture, iris/diaphragm, more through the cornea than through the lens.
retina/digital sensor. You might form In a camera, the image is focused on film or on a digital sensor. Light-
an opinion that the development of sensitive cells in the retina at the back of each eye cavity accomplish the
the camera as an optical instrument
same task. The retina converts the light signal into an electrical signal that is
was based on the parts of the human
eye and how they function. You can do transmitted to the brain through the optic nerve (Figure 1). The optic nerve
further research to find out whether creates a blind spot at the back of each eye because there are no light-sensitive
anyone else agrees with your opinion. cells in this small area. You do not notice the blind spot in normal vision
because each eye compensates for the blind spot of the other eye. That is, your
left eye can see what is in the blind spot of your right eye and vice versa.
retina
iris
pupil lens
optic nerve
cornea
(a) (b)
Figure 1 The anatomy of the human eye

T RY THIS DISCOVERIng YOUR BLInD SPOT
SKILLS HANDBOOK
SKILLS: Performing, Observing, Communicating 3.B.
Equipment and Materials: pencil; blank sheet of paper 3. Keep your eye focused on the “X” and slowly bring the
paper straight toward you. At a certain point, the dot
1. Place a dot with a diameter of 2–3 cm on the sheet of paper.
should disappear.
Place an “X” of similar size so that it is 6 cm to the right of
the dot. 4. Keep moving the paper until the dot reappears.
2. Hold the paper at arm’s length in your right hand. Close your A. Why did the dot disappear? T/I
right eye and look at the “X” with your left eye. You should B. Why did the dot reappear when you continued moving
also be able to see the small dot out of the corner of your the paper? T/I
eye. This is called “peripheral vision.” C. Why do you not normally notice this “hole” in your vision? T/I
Most people think that they see with their eyes. In reality, the eye acts DID YOU KNOW?
as a light gathering instrument. We actually “see” with our brain. The Eye See
cornea–lens combination of the eye acts like a converging lens and produces The average person blinks about
a smaller, real, inverted image on the retina (Figure 2). Electrical impulses 15 000 times a day.
from the retina travel through the optic nerve to the brain where we “see”
the image. The brain takes the inverted image from the retina and flips it so
that the image we “see” appears upright.
eye muscle
retina
iris
pupil
cornea optic nerve
lens
Figure 2 The eye acts like a converging lens and produces a smaller, inverted, real image on
the retina.
Eye Accommodation
A camera focuses by moving the lens in and out because the plane of the
film or digital sensor is fixed. The human eye, however, cannot move the
lens in and out like a camera. Eyes have evolved a different way of producing
a clear image.
NEL 13.6 The Human Eye 573

In humans, eye muscles called ciliary muscles help the eye focus on
distant and nearby objects by slightly changing the shape of the eye
lens. This change in shape of the eye lens changes the focal length of the
accommodation the changing of shape lens to allow focusing of the image on the retina. This process is called
of the eye lens by eye muscles to allow accommodation. A healthy eye can accommodate itself to view distant and
a sharply focused image to form on the nearby objects (Figure 3).
retina
distant image nearby image

object object
(a)
(a) (b)
(b)
Figure 3 A healthy eye can focus light from both distant objects (a) and nearby objects (b) on the
retina. Notice that the lens is slightly fatter when focused on nearby objects.
Focusing Problems
For some people, the process of accommodation does not work as well as it
should. These people’s eyes cannot focus on objects at every distance. This
can result in blurred vision. The difficulty might be with focusing on nearby
objects or on distant objects.
Hyperopia (Far-sightedness)
hyperopia the inability of the eye to focus A person who has hyperopia is far-sighted. This means that the person
light from near objects; far-sightedness has no difficulty seeing distant objects. Seeing nearby objects is a problem,
however, because the eye cannot refract light well enough to form an image
on the retina. Far-sightedness usually occurs because the distance between
the lens and the retina is too small or because the cornea–lens combination
is too weak. Instead, light from all nearby objects focuses behind the retina
(Figure 4).

distant nearby
Unit D: Lights
object object
Figure Number CO13-F31-UDOS10SB

(a)
(a) (b)
(b)
Creative
Figure 4 (a) A far-sighted person focuses light from a distant object onto the
Pass retina. (b) Light from nearby objects, however, is focused behind the retina.
Approved Approved
Not approved

The far-sighted eye needs help in refracting light. A converging lens will
do the trick. The actual lens shape is modified from the basic converging
lens shape and is called a positive meniscus. A positive meniscus lens is a positive meniscus a modified form
converging lens because the middle part of the lens is still thicker than the of the converging lens shape
edge (Figure 5). A positive meniscus is much more cosmetically appealing
than the thick shape of a basic converging lens.
the solution the actual lens shape
positive
meniscus
nearby nearby
object object
(a)
(a) (b)
(b)
Figure 5 (a) A converging lens will correct far-sightedness. (b) A lens with a positive meniscus has
the same effect because it, too, is thickest in the middle.
Presbyopia
Many people find it harder to read small print as they get older. The reason
is that the eye lens loses its elasticity. This loss of accommodation results in
a form of far-sightedness called presbyopia. Presbyopia is an age-related presbyopia a form of far-sightedness
vision condition and, unlike hyperopia, is not a result of the eyeball being caused by a loss of accommodation as
a person ages
too short for focusing. Presbyopia can also be corrected by glasses with
converging lenses.
Myopia (Near-sightedness)
A person who has myopia is near-sighted. This means that the eye can myopia the inability of the eye
focus light rays from nearby objects on the retina; this person can see close to focus light from distant objects;
near-sightedness
up quite clearly. Distant objects, however, are a problem. Myopia usually
occurs because the distance between the lens and the retina is too large or
because the cornea–lens combination converges light too strongly. In the
near-sighted eye, light from distant objects is brought to a focus in front of
the retina (Figure 6).
Unit D: Lights
nearby distant
object object
Creative (a)
(a) (b)
(b)
Pass Figure 6 (a) A normal, healthy eye focuses light from nearby objects directly on the retina.
(b) A near-sighted eye focuses light from distant objects in front of the retina.
Approved Approved
Not approved

DID YOU KNOW? The near-sighted eye can focus the image if incoming light rays diverge a
A Common Sight little. A diverging lens achieves this. The actual lens shape is modified from
Myopia is a common vision condition the basic diverging lens shape and is called a negative meniscus. A negative
that affects nearly 30 % of Canadians. meniscus lens is a diverging lens because the edge of the lens is still thicker
than the middle part (Figure 7). A negative meniscus is, again, much more
negative meniscus a modified form of cosmetically appealing than the thick edge of a basic diverging lens.
the diverging lens shape
the solution the actual lens shape
negative
meniscus
distant distant
object object
(a)(a) (b)(b)
Figure 7 (a) A diverging lens will correct near-sightedness. (b) A lens with a negative meniscus has
the same effect because it, too, is thinnest in the middle.
Contact Lenses
contact lens a lens that is placed directly A contact lens is a lens that is placed directly on the cornea of the eye.
on the cornea of the eye Contact lenses serve the same purpose as glasses. A contact lens can
be shaped so that it can be used for correcting far-sightedness or
near-sightedness (Figure 8). A contact lens is usually invisible when
placed on the cornea.
Contact lenses can also be used for strictly cosmetic purposes when they
are used to change the colour of the eye. Movie makeup artists make use
of contact lenses in this way to transform actors into zombies or demons
WRITIng Tip
(Figure 9).
Writing a Critical Analysis
In a critical analysis of contact lenses,
you might focus on the problems
that some people experience. These
problems could include dry eyes,
irritation, and blurred vision. You might
conclude by suggesting possible
solutions to these problems such as
better contact lens care, nocturnal
contact lenses, permanent implantable
Ontario
contact Science
lenses, 10SB
or laser eye surgery.
Unit D: Lights

Figure 8 A contact lens can be used to Figure 9 A contact lens creates this
Company Theresa Sakno improve vision. “cat’s eye” effect.
Creative
Pass
Approved Approved
Not approved

RESEARCH THIS OTHER VISIOn PROBLEMS
4.A.
The human eye can suffer from vision problems for many other A. What causes astigmatism? How is it treated? T/I
reasons than the ones mentioned here. Just as you have regular B. How does an optometrist check if someone has
health check-ups with your family doctor, it is also important glaucoma? T/I
to take care of the health of your eyes. Regular visits to an
C. What factors contribute to the formation of cataracts? T/I
optometrist will alert you to eye problems.
D. Prepare a visual presentation that summarizes these vision
1. Research the cause, development, and treatment of each
problems, their causes, and how they are treated. T/I C
of these common eye problems.
• astigmatism
• glaucoma
• cataracts
UNIT TASK Bookmark

In this section, you learned about vision and vision problems. How can you apply your
knowledge to the Unit Task described on page 588?
In SUMMARY
• The cornea–lens combination in the eye acts like • Hyperopia means that a person is far-sighted;
a converging lens; the brain flips the inverted near vision is corrected with a converging lens.
image that it receives from the eye so that what • Presbyopia is an age-related condition of
you see is upright. far-sightedness that is caused by a loss of
• The eye focuses through accommodation; the accommodation.
shape of the eye lens is changed slightly by eye • Myopia refers to a person who is near-sighted;
muscles. distant vision is corrected with a diverging lens.
CHECK YOUR LEARnIng

1. Describe at least three similarities between a camera and 5. (a) People often require reading glasses as they get older.
the human eye. A What vision problem do these people usually have,
2. The text states that we actually “see with our brain.” What and what causes it?
is meant by this? K/U (b) Which corrective lens shape corrects this problem,
3. (a) What is the difference between far-sightedness and a positive meniscus or a negative meniscus?
near-sightedness? Explain. K/U A
(b) What simple lens shape would correct each of these 6. The introduction to this chapter described how glasses
problems? K/U were used to start a fire in Lord of the Flies. Would
eyeglasses to correct near-sightedness be able to do this?
4. The actual lens shapes to correct the two vision problems
Explain, with the aid of a diagram. K/U C A
of far-sightedness and near-sightedness have been
modified. K/U A
(a) What are these new lens shapes called? Draw an
example of each new shape.
(b) Why have they been changed from the basic lens
shapes?

Laser Eye Surgery SKILLS MENU

Laser eye surgery is prominently advertised as Researching Decision
providing an alternative to glasses and contact lenses. Alternatives Evaluating
Many laser surgery clinics have opened throughout Analyzing the Issue
the country (Figure 1). Laser eye surgery involves
using a laser to reshape the cornea of the eye in order
to improve vision. It is a technique that is becoming
more widely used.
Figure 1 Laser eye surgery is now so routine that it is performed at clinics in shopping malls.
The Issue Goal

Your best friend suffers from myopia Your friend has asked you for advice about laser eye
(near-sightedness). Your friend presently wears surgery. You need to become informed about the
glasses to correct this vision problem. Every day on issues relating to laser surgery. You will need to come
the bus to school, you and your friend see ads from to a decision about whether or not you think laser
laser eye surgery clinics. They promise to provide surgery is appropriate for your friend.
you “Freedom from glasses and contacts. Become
the person you always wanted to be!” Your friend
eventually confides in you. She is wondering if laser
surgery is right for her.

Gather Information Make a Decision

SKILLS HANDBOOK
4.A., 4.B., 4.C.
Work in pairs or in small groups to learn about the Make a clear recommendation to your friend about
following issues associated with laser eye surgery. whether she should pursue laser surgery. Clearly state
• What main procedures are used? the criteria you used in arriving at your decision. T/I
• How long does it take, and how expensive is it?

• How long does recovery take? Communicate
• What is the success rate? Prepare a consumer news report that clearly
identifies all the concerns, issues, and possible
• How safe is it?
solutions related to laser eye surgery. The report
• What are some possible drawbacks to could be either an article that would appear in a
laser surgery? popular science magazine or a Health Unit pamphlet.
• How big a factor is age and occupation in Your report should indicate the factors you used to
your decision? analyze the issue and should make use of graphic
Consider how to find reliable, unbiased organizers. Your report should end with a clear
information. Think about the purpose of commercial recommendation and how you arrived at this
websites, advertisements, government publications, recommendation. T/I C A
and medical reports. Which sources are likely to be

most reliable?
Identify Solutions
Think about these questions as you collect and
analyze information. T/I A
• What are the potential positive benefits of laser

eye surgery?
• Does your friend meet the criteria for a candidate
for laser eye surgery?
• What negative concerns does your friend need
to be aware of?
• How big a factor should the cosmetic/appearance
issue be?
• What are the alternatives to laser surgery for
your friend?
• Should your friend wait several more years before
making a decision?

CHAPTER
LOOKING BACK
13
A lens is a transparent object Parallel light rays are Geometric optics can be
used to change the path refracted through a focus used to determine the path
of light. when they pass through a of light rays through lenses.
converging lens.
• Light is able to pass through a lens • A converging lens produces an
but is refracted (bent) by the lens. • A converging lens brings parallel inverted, real image when the object
(13.1) light rays together through a focus is beyond Fʹ. The image is smaller if
• The shape and the material of the after refraction. (13.1) the object is beyond 2Fʹ, the same
lens affect how light is refracted. • A diverging lens spreads light rays size at 2Fʹ, and larger if the object is
(13.1) apart after refraction so that it looks between 2Fʹ and Fʹ. (13.3)
• Lenses with specific characteristics as if they have come from a virtual • A converging lens produces a virtual
are created for use in optical focus. (13.1) image when the object is between
devices. (13.5, 13.6) • The principal focus of a converging Fʹ and the lens. The image is always
lens is on the opposite side of the larger, upright, and on the same side
lens as the incoming light rays. of the lens as the object. (13.3)
(13.1) • A diverging lens always produces a
• The principal focus of a diverging smaller, upright, virtual image that is
lens is on the same side of the lens on the same side of the lens as the
as the incoming light rays. (13.1) object. (13.3)
Both ray diagrams and Lenses have many The eye can be treated as a
algebraic equations can technological uses that lens, and vision problems can
be used to determine the benefit humans. be corrected with other lenses.
characteristics of an image in
• A camera produces a smaller, • The cornea–lens combination in
a lens.
inverted, real image of a large, the eye acts like a converging lens.
• Thin lens equation: distant object. A film projector Eye muscles change the shape
1 + __
__ 1 = __
1 (13.4) produces a larger, inverted, real of the eye lens to allow you to
do di f image of a small, nearby object. focus on objects that are distant
(13.5) and nearby. (13.6)
• Magnification equation:
h d • A compound microscope and a • Converging lenses help a
M = __i = – __i (13.4) refracting telescope both contain far-sighted person see nearby
ho do
two converging lenses and both objects. (13.6)
produce a larger, inverted, virtual • Diverging lenses help a
image. (13.5) near-sighted person to see
distant objects. (13.6)

THINK NOW? converging lens (p. 551)
diverging lens (p. 551)
You thought about the following statements at the beginning of optical centre (p. 552)
the chapter. You may have encountered these ideas in school, principal focus (p. 552)
at home, or in the world around you. Consider them again and emergent ray (p. 556)
decide whether you agree or disagree with each one. thin lens equation (p. 562)
accommodation (p. 574)
hyperopia (p. 574)
card positive meniscus (p. 575)
presbyopia (p. 575)
myopia (p. 575)
negative meniscus (p. 576)
contact lens (p. 576)
object
lens
1 Athatcamera lens produces images

are upside down and flipped
4 Iftheyouimage
cover up half of an object, then
that you will see through a
horizontally. lens will be only half of the object.
2 Iflenses
you are near-sighted, then thick
will help you see better.
5 Amicroscope
magnifying glass is very similar to a
in how it forms an image.
card
object
lens
BiG ideas
If you cover up half of a lens, then the Many people require glasses for
3 image that you will see through the
6 reading as they age because the ability
be manipulated with
lens will be only half of the object. of the eye to focus decreases with age.
range of uses.
What new understanding do you have? a range of optical devices
and technologies.

CHAPTER
REVIEW
13
What Do You Remember? 13. (a) Copy Figure 1 into your notebook. Add light
rays to locate the image of each object.
1. What type(s) of image does a converging lens
produce? (13.3) K/U
(b) Describe the characteristics of each image.
(13.3) T/I C
2. What type(s) of image does a diverging lens

produce? (13.3) K/U
(i)
F 2F 2F  F
3. Name the centre of a lens. (13.1) K/U
4. List at least three lens applications that produce

a virtual image. (13.5) K/U
(ii)
5. What type of image does a compound 2F F F 2F 
microscope produce? If more than one image is
produced, state the type of each. (13.5) K/U
6. State the location of an object when viewed

(iii)
through a refracting telescope. (13.5) K/U
2F  F F 2F
7. Which eye condition is treated with a negative

meniscus lens? (13.6) K/U
8. What do your eye muscles adjust for when they (iv)

cause the lens to change shape slightly? (13.6) K/U 2F F F 2F 
Figure 1
14. Distinguish between hyperopia and
9. A converging lens has a focal length of 17 cm. presbyopia. (13.6) K/U
Describe the characteristics of the image of a

candle that is placed at these distances from the 15. Using diagrams, explain how
lens: (13.3, 13.4) T/I C13-F39-UDOS10SB.ai
(a) a diverging lens corrects near-sightedness.
(a) 34 cm (b) a converging lens corrects
(b) 52 cm far-sightedness. (13.6) K/U C
(c) 17 cm 16. Distinguish between astigmatism, glaucoma,

(d) 25 cm and cataracts. (13.6) K/U
(e) 12 cm
10. Why will a diverging lens never produce a real Solve A Problem
image? (13.3) K/U
Ontario Science 10 SB 17. A converging lens has a focal length of 21 cm.
0-17-635528-6
11. What is the relationship between the type A candle is located 57 cm from the lens. (13.3,
FN
(virtual or real) and attitude (inverted or 13.4)
C13-F39-UDOS10SB T/I C
upright) of the image for: CO CrowleArt Group

(a) What type of image will be formed?
(a) a converging lens? Deborah Crowle
(b) Where will the image be located?
Pass
(b) a diverging lens? (13.3) K/U 3rd pass
Approved 18. A magnifying glass has a focal length of 18 cm.
12. What are the characteristics
NotofApproved
the image formed A leaf is located 13 cm from the lens. Where will
on the retina of the eye? Explain. (13.6) K/U
the image of the leaf be located? (13.3, 13.4) T/I C

19. A rose of height 14 cm is placed in front Create and Evaluate
of a converging lens. An inverted, real image
25. Compare the similarities between a camera and
of height 43 cm is noticed on the other side
the human eye. Contrast the differences between
of the lens. What is the magnification of the
them. (13.5, 13.6) A
lens? (13.3, 13.4) T/I C
26. Assume for the moment that an invisibility cloak

20. A model ship of height 18 cm is placed in front is actually possible. What kind of vision would
of a diverging lens. A smaller, virtual image of somebody under this cloak experience? Explain
height 12 cm is noticed. (13.3, 13.4) K/U T/I C
by making reference to how the eye forms
(a) What is the magnification of the lens? images. (13.6, 12.6) A
(b) On what side of the lens would this virtual

image be located? Reflect On Your Learning
(c) Would it ever be possible for this lens to
produce an image that is larger than the 27. In this chapter, you learned that lenses have
object? Explain. many practical applications in our society.
Now imagine that all devices using lenses just
21. A camera is focused to take a photo of a bee at disappeared. How would this affect your life?
a flower. The film in the camera is 11 cm from
the centre of a lens. The bee is 53 cm from the Web Connections
camera. What is the focal length of the camera
lens? (13.3, 13.4) T/I C
28. Research the major developments in the
invention of eyeglasses. Present your findings as
22. An upright object is placed 17 cm in front of a timeline. (13.6) T/I C
a lens. This is less than the focal length of the

29. Find out how night vision goggles work. Draw a
lens. An upright, virtual image is observed that
diagram to illustrate your discovery. (13.6) T/I C
has a magnification of 2.8 times the object.

(13.3, 13.4) T/I C 30. How do 3-D glasses allow the eye to perceive
(a) What kind of lens must this be? Explain. images in 3-D? Create a pamphlet that advertises
(b) Where is the image located? this technology to movie theatres. (13.6) T/I C A
31. Research these lens imperfections and how they

23. Figure 2 shows the location of the image. Copy
can be reduced. Write a brief report on your
the diagram into your notebook and add light
findings. (13.5)T/I C A
rays to locate the object. (13.3) T/I C
image
(a) chromatic aberration
(b) spherical aberration
2F  F F 2F
32. Research these three occupations and how they
are different from one another. Present your
Figure 2 findings in a table. (13.6) T/I C
(a) optician
24. A student previously had to sit at the front of (b) optometrist
the class to clearly see writing on the board. (c) ophthalmologist
The student now wears glasses and can read the
board quite comfortably from the back of the
classroom. (13.6) K/U C A
(a) What kind of vision problem does this

studentC13-F40-UDOS10SB.ai
have?
(b) Do the student’s eyeglasses have lenses
that have a positive meniscus or a negative
meniscus? Explain. To do an online self-quiz or for all
Nelson Web Connections,

CHAPTER
SELF-QUIZ
13
For each question, select the best answer from the four Indicate whether each statement is TRUE or FALSE. If you
alternatives. think the statement is false, rewrite it to make it true.
1. Which statement correctly describes the path of 5. A converging lens produces an image by
a light ray when it reaches the optical centre of a reflecting light rays that strike it. (13.1) K/U
converging lens? (13.1) K/U
6. When using the thin lens equation, the distance

(a) The ray is refracted parallel to the principal from the object to the optical centre of the lens
axis. must be expressed as a positive value. (13.4) K/U
(b) The ray is refracted through the principal

focus.
(c) The ray is reflected back in the direction Copy each of the following statements into your notebook. Fill
from which it came.
the sentence.
(d) The ray continues on its original path
without changing direction. 7. A ___________ lens always forms an image on
the same side of the lens as the object. (13.1) K/U
2. A compound microscope produces

(a) a small, inverted image and a larger, upright, 8. A magnifying glass produces a larger,
real image. ___________ image of an object. (13.5) K/U
(b) an inverted, real image and a larger, inverted, 9. ___________ occurs when the eye lens changes
virtual image. shape to allow an image to focus on the retina.
(c) an upright, virtual image and a larger, (13.6) K/U
upright, virtual image.

(d) a small, inverted image and a larger, upright,
Figure 1 shows a convex lens. Match the term on the left with
virtual image. (13.5) K/U
the appropriate location on the right.
3. Where should you place an object in front of
a converging lens to produce an inverted, real
image that is the same size as the object?
(13.3) K/U
Y
(a) at F´
(b) at 2F´ X W Z
(c) beyond 2F´
(d) between 2F´ and F´
4. A lens that has a magnification of 1.0 will
(a) not produce an image. Figure 1
(b) produce an image that is larger than the 10. (a) principal focus (i) W
original object. (b) optical centre (ii) X
(c) produce an image that is smaller than the (c) principal axis (iii) Y
original object. (d) secondary principal focus (iv) Z (13.1) K/U
(d) produce an image that is the same size as the

original object. (13.4) K/U
Write a short answerC13-F47-UDOS10SB.ai
to each of these questions.
11. Is it possible to position an object in front
of a converging lens so that no real image is
produced by the lens? Explain why or why not.
(13.3) K/U

12. A converging lens has a focal length of 15 cm. 19. You want to take a photograph of a large group
A ring is placed 32 cm from the lens. How far of people. At first, everyone does not fit into
from the lens is the image of the ring? Show your the picture. When you move farther away from
work. (13.3, 13.4) T/I the group, everyone fits into the picture, but the
people appear smaller than before. Use what you
13. A small figurine is placed 6.5 cm in front of a
know about lenses to explain why this happens.
lens. The lens produces a virtual image with a
(13.3, 13.5) A
magnification of 2.9. (13.3, 13.4) T/I
(a) Is the image located on the same side of the 20. Imagine you worked for a newspaper at the
lens as the figurine? time when Antonie van Leeuwenhoek invented
(b) How far from the lens is the image located? his microscope. You have just attended a
Show your work. demonstration of the device. Write a paragraph
for your newspaper describing the event and
14. A flower 10.4 cm high is placed in front of a what you saw. (13.5) C
diverging lens. An upright, virtual image that is

4.1 cm high is formed on the same side of the 21. The magnification equation is expressed
lens as the flower. What is the magnification of mathematically as M = hhi = – ddi . Express the
o o
the lens? Show your work. (13.3, 13.4) T/I magnification equation in words. (13.4) C
15. A converging lens has a focal length of 22 cm. 22. Explain which type of telescope would be most
An object placed 63 cm from the lens has an appropriate in each situation. (13.5) K/U T/I
image that is 34 cm from the lens. If the distance (a) A sailor on open water needs to see a distant
between the object and the lens is doubled, will landmass.
the distance between the image and the lens also (b) An astronomer wants to observe a star in
double? Show your work. (13.3, 13.4) T/I another galaxy.
16. (a) Is the film in a movie projector loaded into 23. In this chapter, you learned that the human
the projector right side up or upside down? eye is similar to a camera in many ways. What
(b) Explain why the film is loaded the way you part of a camera has a function similar to the
stated in part (a). (13.5)
K/U function of the human retina when you see an
object? Explain your answer. (13.5, 13.6) T/I
17. (a) Some people with presbyopia hold a book

farther than a normal distance from their 24. For a converging lens, why is the distance from
eyes so that they can read the print. How the optical centre to the principal focus the same
does this help their eyes focus? as the distance from the optical centre to the
secondary principal focus? (13.1) T/I
(b) What type of glasses would help a person
with presbyopia? (13.6) K/U A
18. Your friend does not understand how a distance

used in the thin lens equation can be negative.
Explain why there is a negative sign in front of a
distance representing a virtual image. (13.4) T/I C

UNIT
LOOKING BACK
E
UNIT E
Light and
Geometric Optics

and Reflection of Light Optical Devices
of Light

Optical devices Light changes A lens is a
benefit our society direction predictably transparent object
in many ways. as it travels through used to change the
Light is produced by different transparent path of light.
natural and artificial media. Parallel light rays are
sources. Light bends toward refracted through
Light is an the normal when a focus when they
electromagnetic it slows down in pass through a
wave that travels a medium with a converging lens.
at high speed in a higher index of Geometric optics can
straight line. refraction. be used to determine
When light is Total internal the path of light rays
reflected off a flat, reflection may occur through lenses.
shiny surface, the when an incident Both ray diagrams
image is equal in size ray is aimed at and algebraic
to the object and the a medium with equations can be
same distance from a lower index of used to determine
the surface. refraction. the characteristics
Images in flat mirrors Many optical of an image in a
are located at the devices make use lens.
point where the of the refraction and Lenses have many
backward extensions reflection of light. technological uses
of reflected rays The refraction and that benefit humans.
intersect. reflection of light can The eye can be
Curved mirrors be used to explain treated as a lens,
produce a variety of natural phenomena. and vision problems
images. Understanding the can be corrected
behaviour of light is with other lenses.
key to many careers.

MAKE A SUMMARY
SKILLS HANDBOOK
This summary activity will help you consolidate your understanding of important vocabulary in this unit. 8.B.
Part A: Word Mixer Activity

1. Your class is divided evenly in two groups. Each person in WORD DEVELOPMENT GUIDE
Group 1 receives a card on which a word or concept from
the unit is printed (word wall cards).
2. Each person in Group 2 receives a card with a definition on it.
Similar word or Create a picture or
3. Match the words or concepts with the appropriate definitions synonym: symbol to represent
by finding the person in the other group with a match for the word:
your card. Once you find a match, you and your partner can
continue with Part B. K/U
Part B: Word Development Guide Word or concept
4. You and your partner each fill out a Word Development Guide
based on Figure 1. K/U C
5. When you have finished, compare your Word Development Put the word into Define using your
Definition from
Guide with the one completed by your partner. Note how a sentence: the textbook: own words:
your entries in the boxes were similar or different. On
your original sheet, add any good suggestions or entries
that your partner has written. Keep this guide for future
reference.
Figure 1
6. Repeat Parts A and B with other words or concepts,
according to your teacher’s directions.
CAREER LINKS
List the careers mentioned in this unit. Choose two of the careers that interest you or choose two other
careers that relate to light and geometric optics. For each of these careers, research the following information:
• educational requirements (secondary and • potential salary
post-secondary) • duties/responsibilities
• skill/personality/aptitude requirements
Assemble the information you have discovered into a chart. Your chart should compare
your two chosen careers, and explain how they use light and geometric optics.

UNIT
UNIT TASK
E
Building an Optical Device SKILLS MENU
Optical devices have had a great impact on our society Hypothesizing Observing
and on our knowledge and understanding of the physical Planning Evaluating
world. The invention of the compound microscope, for Controlling Variables Communicating
example, opened up the entire field of microbiology
(Figure 1). The study of diseases, their causes, and how
to prevent them was made possible through the use of For this Unit Task you will design and build a
the microscope. The telescope in the last two decades has prototype of an optical device.
totally revolutionized our understanding of astronomy.
Modern telescopes provide incredibly detailed pictures Purpose
of the planets and moons in our solar system, comets, To build one of these optical devices:
exploding stars, Einstein rings, and other phenomena.
• a refl ecting telescope
• a microscope
• a projector
• a device that enables people to see spaces
normally hidden from view (for example, the
back of one’s head, hidden corners of a store,
under or around furniture)
• a device of your own design (either for a serious
purpose or for entertainment)

Your optical device must use at least two components
Figure 1 Microscopes are important tools for diagnosing diseases, from this list:
especially those caused by micro-organisms.
• plane mirror
In addition to their use as tools for scientific • converging mirror
exploration, optical devices are often used for
• diverging mirror
entertainment. Movie projectors are used to play the
latest action movie or breathtaking documentary. Many • prism
people enjoy photography as a leisure activity and use • converging lens
cameras to record memories of trips (Figure 2). • diverging lens
• ray box
These components will be available from the teacher.
You may use more than two if your school’s supply of
equipment allows this.
Your device will also require some materials to
hold your optical components together. The school
may provide some of these materials (for example,
glue, cardboard, tape).
Figure 2 We use cameras so often that we barely think about the

technology involved.

Procedure
SKILLS HANDBOOK
3.B., 7.A. ASSESSMENT CHECKLIST
Your school may require that school materials stay on Your completed Performance Task will be
school property. If this is the case, your teacher will assessed according to these criteria:
allow you time to construct, test, and modify your
device in the Science classroom or lab.
✔ Demonstrate a knowledge of geometric optics.
1. Select a device that you will construct. ✔ Demonstrate a knowledge of the imaging properties of
2. Design your device. Your design should include optical components.
a neat, scale drawing.
3. Prepare a list of materials that you will need. ✔ Develop a plan for constructing the optical device.
Have your teacher review this list. ✔ Incorporate safety principles.
4. Construct a prototype of your device. ✔ Incorporate environmental considerations.
5. Test your prototype to see how well it works. ✔ Perform the task in an organized manner.
✔ Analyze the results.
6. Modify your prototype until it produces a result
✔ Evaluate the design and modify it as necessary.
that you are satisfied with. This final version of
the prototype will be your finished device. Communication
✔ Prepare an appropriate lab report addressing the finalized
design, the materials used, a scale diagram, and an
Analyze and Evaluate evaluation of the device’s effectiveness.
(a) How well does your device do what you want it ✔ Communicate clearly during your design demonstration.
to do? ✔ Demonstrate an understanding of ray diagrams and the
(b) What problems did you run into in construction? proper symbols of optical components.
(c) How did you solve these construction problems? Application

✔ Use two or more optical components together.
(d) Describe the image that your device produces
✔ Achieve the stated goal with the optical device.
under these headings:
✔ Build a mechanically sound, environmentally friendly, and
• magnifi cation safe device.
• quality of image ✔ Pay attention to the overall appearance and aesthetics of
• image characteristics the device.
(e) How easy is your device to use?

(f) How would you do this activity differently if you
were to do it all over again?
Apply and Extend

SKILLS HANDBOOK
4.A., 4.B.
(g) Draw a neat ray diagram to illustrate how your
device produces an image.
(h) Demonstrate your device to your class.
(i) Research real-life examples of the device that you
designed.
NEL Unit E Task 589

UNIT
REVIEW
E
What Do You Remember? 6. Which material will refract light the least?
(a) material A with n = 1.72
(b) material B with n = 2.34
alternatives.
(c) material C with n = 1.58
1. The angle of incidence is the angle between the (d) material D with n = 1.92 (12.4) K/U
(a) incident ray and the surface of a material

7. A larger, upright, virtual image is noticed in a
(b) refracted ray and the normal
converging lens. The object must be located
(c) incident ray and the normal
(d) refracted ray and the surface of a material (a) beyond 2Fʹ
(11.4)K/U
(b) between 2Fʹ and Fʹ
(c) at Fʹ
2. Light refl ecting off a plane mirror is an example of (d) between Fʹ and the lens (13.3) K/U
(a) specular refl ection

8. A person who is far-sighted can clearly see
(b) diff use refl ection
(c) total internal refl ection (a) distant objects but not nearby objects
(d) refraction (11.6) K/U
(b) both distant and nearby objects
(c) nearby objects but not distant objects
3. Which of these best describes the index of (d) none of the above (13.6) K/U
refraction for a medium? (12.4) K/U
(a) the speed of light in a vacuum times the Indicate whether each statement is TRUE or FALSE. If you
speed of light in the medium think the statement is false, rewrite it to make it true.
(b) the speed of light in a vacuum minus the 9. Light is a form of energy. (11.1) K/U
speed of light in the medium

(c) the speed of light in a vacuum divided by the 10. Light is visible electromagnetic waves. (11.1) K/U
speed of light in the medium

11. Light can only travel through a medium. (11.1) K/U
(d) the speed of light in a vacuum plus the speed

of light in the medium 12. A light ray is either refl ected or transmitted
when it strikes a surface such as a piece of glass.
4. Which of these best describes the angle of
(12.1) K/U
refraction? (12.1) K/U
(a) the angle between the refracted ray and the 13. The centre of a lens is called the centre of
normal curvature. (13.1) K/U
(b) the angle between the refracted ray and a 14. A converging lens spreads parallel light rays
refl ective surface apart after refraction. (13.1) K/U
(c) the angle between the refracted ray and the

refl ected ray 15. A positive meniscus lens is a converging lens.
(d) the angle between the refracted ray and the (13.6) K/U
incident ray
16. A light ray that is parallel to the principal axis of
5. Which medium has an index of refraction of a lens is not refracted. (13.3) K/U
exactly 1.0? (12.4) K/U

17. Einstein predicted that gravitational forces can
(a) vegetable oil change the path of light. (13.5) K/U
(b) glass
(c) vacuum 18. The function of film in a camera is most like the
(d) water function of the iris of a human eye. (13.5) K/U

19. An object located at the secondary principal Write a short answer to each question.
focus, F´, of a converging lens has an image that 31. Classify each of these materials as transparent,
is exactly the same size as the object. (13.3) K/U
translucent, or opaque: (11.4) K/U
(a) a clean sheet of glass (e) a tree

Copy each of the following statements into your notebook. (b) a clear, cold winter (f) hazy, polluted air
Fill in the blanks with a word or phrase that correctly
sky
completes the sentence.
(c) frosted glass (g) a glass of water
20. A light source that produces its own light is (d) a brick
called ________. (11.2) K/U
32. Describe the shape of a converging lens as

21. All electromagnetic waves travel at the speed of compared to the shape of a diverging lens.
________. (11.1) K/U
(13.1) K/U
22. ________ rays are the type of electromagnetic 33. Define each of these terms: (11.4, 11.7, 11.9, 12.1,
radiation with the greatest energy. (11.1) K/U
12.7, 13.4) K/U
23. A diverging (convex) mirror can only produce (a) angle of incidence
images of a ________ size and a(n) ________ (b) angle of refraction
attitude. (11.9) K/U (c) focus
(d) magnification
24. A magnifying glass is an example of a ________ (e) mirage
lens. (13.5) K/U
(f) virtual image
25. At the critical angle, the angle of refraction is
________. (12.5) K/U
26. A lens that is thinnest in the middle and thickest 34. Give an example of each of these objects.
at the edge is called a ________ lens. (13.1) K/U (11.4) K/U A
27. Light rays that are parallel to the principal (a) an opaque object
axis of a converging lens meet at the principal (b) a transparent object
________. (13.1) K/U
(c) a translucent object
28. Total internal reflection will occur when the 35. (a) Use capital letters to write a three-letter word
angle of incidence is greater than the ________ that appears exactly the same when viewed
angle. (12.5) K/U
in a plane mirror.
(b) Use capital letters to write a three-letter word
29. The term for near-sightedness is ________. that appears as a different word when viewed
(13.6) K/U
in a plane mirror. (11.7) A
Match each type of electromagnetic radiation on the left with 36. Describe how each of these processes produces
its application on the right. light. (11.2) K/U
30. (a) ultraviolet light (i) human vision (a) electric discharge
(b) infrared light (ii) “black” lights (b) bioluminescence
(c) visible light (iii) DVD player remote (c) chemiluminescence
(d) radio waves controls 37. Sketch how the word OPTICS would appear
(e) X rays (iv) dental imaging when viewed in a plane mirror. (11.7) K/U C
(v) radar (11.1)K/U
38. What two properties do all electromagnetic

waves possess? (11.1) K/U
NEL Unit E Review 591

39. Compare the process of light emission in 44. Copy Figure 1 into your notebook.
(a) incandescence and fl uorescence (a) Use at least three object−image lines and lines of
(b) triboluminescence and phosphorescence equal length that are perpendicular to the mirror
(11.2) K/U
to determine the image for each object.
40. Classify each material as exhibiting specular or (b) Describe the four characteristics of each image.
diff use refl ection. Justify your answer in each (11.7) T/I C
case. (11.6) K/U C
(a) a highly waxed (c) a dense carpet P

fl oor T
(b) a crumpled sheet (d) a fl at sheet of
of aluminum foil aluminum foil, (a) (b) (c)
shiny side up Figure 1
41. Explain why a laser would not be a useful tool 45. Copy Figure 2 into your notebook.
for illuminating a dark room. (11.3) T/I
(a) Locate the image of each object
42. Clearly explain why diverging mirrors and (b) State the four characteristics for each image.
diverging lenses can never form a real image. (11.9) T/I C
Illustrate your answer with diagrams.

(11.9, (13.3) K/U C
(a)
F C
43. Copy and complete Table 1 in your F C
notebook. (11.6) K/U T/I
Table 1 Angles of Incidence and Reflection (b) V F C

V F C
Description Angle of Angle of F C
incidence reflection
C F
(c) C F
angle between the V F C
incident ray and the
normal is 38° Figure 2
12°
C F
46. Figure 3 represents a beam of light travelling
angle between the
reflected ray and the flat through two different media.
mirror surface is 43° (a) Which medium has the greater index of
angle between the refraction?
reflected ray and the (b) In which medium will light travel slower?
normal is 23°
(12.4) K/U
0° 0°
material A material B
Figure 3
UR-F03-UDOS10SB.ai
UR-F03-UDOS10SB.ai
UR-F03-UDOS10SB.ai
47. Copy Figure 4 into your notebook. (13.3) T/I C
51. A converging (concave) mirror has a focus (F)
(a) Locate the image for each object. at 27 cm.
(b) State the four characteristics for each image. (a) An object is placed 41 cm away from
the mirror.
(a) • Where will the image of this object
2F  F F 2F
2F  F F 2F be located?
2F  F F 2F
• Is the image actually there even if you
(b) 2F  F F 2F cannot see it?
2F  F F 2F
2F  F F 2F • What could you do to see the image?
(b) The object is now placed 20 cm away from
2F F F 2F 
(c) 2F F F 2F  the mirror. Where is the image located, and
2F F F 2F 
how can you see it? (11.9) T/I C
Figure 4
52. Determine the speed of light in fused quartz
if fused quartz has an index of refraction
Solve a Problem
of 1.46. (12.4) T/I C
48. You like wearing white shirts. Every time you

53. The speed of light in turpentine is
wash your shirt, however, you notice that it
2.04 × 108 m/s. What is the index of refraction
never seems to come out as white as it was
for turpentine? (12.4) T/I C
when you first bought it. The next time you are
in the supermarket you notice a new detergent 54. As a beam of light passes from air into a
that claims it can make your shirts “whiter than transparent medium, the angle between the light
white.” This would seem to solve your problem, ray and the normal changes from 45º to 30º.
if the claim were true. Analyze and assess the What is the speed of light in the medium? Show
merits of this claim. (11.2) T /I A
your work. (12.4) T/I
49. Australia has one of the highest rates of skin 55. A diverging lens has a focal length of 30 cm.
cancer in the world. (11.2) K/U A
A golf ball is located 23 cm in front of the lens.
(a) Which part of the electromagnetic spectrum Where is the image located? Show your work.
is damaging UR-F05-UDOS10SB.ai
to the skin? (13.3, 13.4) T/I
UR-F05-UDOS10SB.ai
(b) What could UR-F05-UDOS10SB.ai
you do to prevent some of this
56. A converging lens has a focal length of
damage, and why would these techniques be
34 cm. A tree is located 45 cm from the lens.
useful?
Calculate the location of the image and state its
50. Your cat likes playing in front of a large mirror characteristics. (13.3, 13.4) T/I C
on the wall. She is constantly trying to reach

10 SB 57. An apple is located 34 cm from a converging
10 SB her image in the mirror, with little success.
10 SB
lens. A real image of the apple is observed 21 cm
She moves back and forth in front of the mirror,
UR-F05-UDOS10SB
from the lens. Calculate the distance from the
but nothing seems to help. Can you account for
UR-F05-UDOS10SB
CrowleArt Group
lens to F. (13.3, 13.4) T/I C
UR-F05-UDOS10SB
CrowleArt Group
her frustration? Use a diagram to demonstrate
Groupwhy she will never be able to touch her image.
Deborah Crowle
CrowleArt 58. For a magnifying glass, F is 24 cm from the lens.
Deborah Crowle
Final
Deborah Crowle (11.7) K/U C
The magnifying glass is held 17 cm in front of a
Final
Final sea shell.
(a) Calculate the location of the image and state
its characteristics.
(b) Determine the magnification of the
magnifying glass. (13.3, 13.4) T/I C

59. A diverging lens is placed 13 cm above a 66. Compare using a t-chart, the functioning
sculpture. The image is located 5.0 cm from the of the human eye with that of a camera.
lens, on the same side of the lens as the sculpture. (13.5, 13.6) C A
(13.3, 13.4) K/U T /I C
67. The word “radiation” has a negative meaning for

(a) What kind of image is produced by the lens? many people. Devise an argument to illustrate
(b) Determine the focal length of this lens. the positive aspects of radiation. (11.1) C A
60. F is 27 cm from a diverging lens. The lens is placed 68. Your aunt’s vision has become increasingly
in front of a fruit bowl. A virtual, upright image is poor. She is now having trouble reading the
located 12 cm on the same side of the lens as the newspaper. (13.6) T/I C
fruit bowl. What is the distance between the lens

(a) What is the name of her vision problem?
and the fruit bowl? (13.3, 13.4) T /I C
(b) Draw a diagram with light rays to illustrate

61. A cat of height 19 cm is placed in front of a her vision problem.
converging lens. An inverted, real image of height (c) What kind of lens would an optometrist
58 cm is located on the other side of the lens. likely recommend for her? Draw a diagram
Calculate the magnification of the lens. to illustrate how this lens would correct her
(13.3, 13.4) T /I C vision problem.
69. Compare the image characteristics of these pairs
Create and Evaluate of optical instruments: (11.9, 13.3) K/U
62. Assess which form of lighting would be (a) a converging lens and a converging mirror
most useful in saving energy in your home. (b) a diverging lens and a diverging mirror
Summarize your findings in a brief report,
including your reasoning. (11.2) C A

63. You are driving with your mother on a winding
70. Assume that all forms of electromagnetic waves,
road. You notice, on a particularly sharp turn,
with the exception of visible light, disappeared.
that convex mirrors are placed on poles at the
Would this make an impact on your life? Explain.
side of the road. What is the purpose of these
mirrors? (11.9) A
71. Other than the fact that your eyes can see
visible light, there is nothing particularly unique
64. The Sun’s energy can be both harmful and
about this narrow band in the electromagnetic
beneficial for humans.
spectrum. Some animal species can detect light
(a) Explain why the Sun is considered to be the outside the visible range. Refl ect on how your life
original source of almost all energy used by would be different if you could see all types of
organisms on Earth. electromagnetic radiation.
(b) Create a public notice for a local pool
explaining the risks of too much Sun 72. Several unusual properties and applications of light
exposure. Include a list of ways that people were described in this unit. Select two properties or
can protect themselves from the Sun’s applications that you found to be most surprising
harmful rays. (11.1) C A and explain your reasoning.
65. As a light ray passes from one transparent

medium into another, it changes both direction
and speed. Draw a diagram showing how the
change in direction is related to the change in
speed. (12.1) C

73. (a) Prepare a concept map (based on Figure 5) 77. Canada’s first space telescope is known as
with you at the centre showing all the ways MOST. Research MOST. How is it constructed,
that mirrors affect your life. and what are its research goals? (11.9, 13.5)
(b) Prepare a second concept map showing all T/I A
the ways that lenses affect your life. 78. (a) Research the history and the development
of the compound microscope. Present your
findings as a timeline.
(b) How is an electron microscope different
from a compound microscope? (13.5) T/ I A
79. (a) Optics has made many positive contributions

to society. Summarize the applications that
have been discussed in this unit. Part of your
Figure 5
summary should include why this application
has such a beneficial effect on society.
Web Connections (b) Use the Internet and other information
74. Refl ecting telescopes are a major tool for resources to research interesting applications
astronomical research involving visible light. of optics. Focus on applications that are
Research the diff erent kinds of refl ecting either not discussed in great detail or not
UR-F06-UDOS10SB.ai
telescopes. Present your findings as a timeline of at all in this unit. This second summary
their historical development. (11.9) T /I should include a discussion of why these
applications are beneficial to society.
75. The laser has many applications in medicine. (11.9, 12.5, 13.5)T/I A C
(11.3) T /I A C
80. Research the development of movie cameras

(a) One application is laser eye surgery, which
from 1900 to the present. (13.5) T/I A C
you examined in Activity 13.7. Research
other medical uses of the laser. Present your (a) Explain how improvements in technology
findings in a table. have enabled filmmakers to film an
(b) The laser is also often used for cosmetic increasingly wide range of subjects.
purposes. Research some of these (b) Choose two or three specialty filming
10 SB technologies (e.g., underwater, microscopic,
applications of the laser. Write a paragraph
to summarize your findings. stop-motion) to illustrate how advances
R-F06-UDOS10SB in movie making have advanced our
76. Research the kind of telescope that Galileo built,
rowleArt Group understanding of the natural world.
eborah Crowle and the major discoveries that he made with
nd pass it. Write two paragraphs to summarize your
findings. (11.9, 13.5) T /I C


UNIT
SELF-QUIZ
E
For each question, select the best answer from the four 7. Visible light is a very narrow band of energy in
alternatives. the electromagnetic spectrum. (11.1) K/U
1. Specular refl ection refers to refl ection from 8. To see the mirror image of an object printed on a
(a) a fl at mirror. page, turn the page upside-down. (11.6) K/U
(b) a curved mirror.

(c) an uneven surface. 9. Loss of accommodation can lead to presbyopia.
(d) a transparent surface. (11.6) K/U
(13.6) K/U
2. A person who can read fine print without glasses

but who must wear glasses to drive most likely Copy each of the following statements into your notebook. Fill
has
the sentence.
(a) astigmatism.
(b) hyperopia. 10. The angle between a light ray striking a
(c) myopia. surface and the normal is called the angle of
(d) presbyopia. (13.6) K/U
__________. (11.4) K/U
3. After striking a converging lens, light rays that 11. The heating wires in a toaster glow red when
are parallel to the principal axis pass through electricity passes through them. This process
(a) the optical center. of producing light using an object at high
(b) the principal axis. temperature is called ____________. (11.2) K/U
(c) the principal focus.

(d) the secondary principal focus. (13.1) K/U Match each term on the left with the most appropriate
definition on the right.
4. What is the process by which materials that
12. (a) transparent (i) produces its own light
absorb light energy release light at a later time?
(b) translucent (ii) allows light to pass
(11.2) K/U
(c) luminous through easily

(a) chemiluminescence (d) opaque (iii) allows some light to
(b) fl uorescence pass through
(c) incandescence (iv) does not allow any
(d) phosphorescence light to pass through
5. In which case does light bend toward the (11.2, 11.4) K/U
normal? (12.1) K/U
(a) light passing through glass Write a short answer to each of these questions.
(b) light passing from glass into air 13. An object is located between F´ and 2F´ of a
(c) light passing from air into water converging lens. Describe the size and attitude of
(d) light passing from cold air into warm air the resulting image. (13.3) K/U
Indicate whether each statement is TRUE or FALSE. If you 14. Human eyes can change focal length in order to
think the statement is false, rewrite it to make it true. focus on objects over a range of distances. Briefl y
describe the mechanism by which eyes change
6. The higher the index of refraction for a medium,
their focal length. (13.6) K/U
the faster light will travel through that medium.

(12.4) K/U

15. Figure 1 shows someone looking through a 19. (a) Compare incandescent light bulbs with
periscope. Copy the diagram into your notebook. fl uorescent light bulbs in terms of light
Add mirrors to complete the diagram. Show the production.
path of light through the periscope with arrows. (b) Your parents are considering using
(11.7) C
fl uorescent bulbs instead of incandescent
bulbs in your house. Describe two
advantages of replacing incandescent bulbs
with compact fl uorescent lights. (11.2) K/U C
20. Two marine biologists are discussing the best

way to shoot tranquilizer darts into sharks so that
they can attach tracking devices onto them. One
biologist wants to dive underwater to shoot the
sharks, whereas the other wants to shoot them
from a boat. Although shooting from the boat is
safer, it presents another problem. (12.7) T/I
(a) Describe the problem.

(b) Explain how to solve the problem in part (a).
Figure 1 21. A student bought a magnifying glass that was

advertised as having a magnification of 4.
16. You want to position a light so that it shines (13.4) T/I A
through the water of an aquarium at an angle (a) How can the student check the magnification
of 45°. The index of refraction for air is 1.00, of the magnifying glass?
and for water it is 1.33. To correctly position (b) Which equation should the student use?
the light, what would the angle of incidence
have to be? (12.4) T/I
22. A converging lens has a focal length of 20 cm. A
cup is located 50 cm from the lens. (13.3, 13.4) A
17. A scientist needs to determine the speed of light (a) What type of image will be formed?
in hexane, a clear liquid hydrocarbon. (13.3) C
(b) Where will the image be located? Show your
(a) Which two pieces of data are needed in order calculations.
-UDOS10SB to calculate the speed?
(b) Which equation should the scientist use? 23. (a) Identify three devices you have used that
Moon
(12.4) T/I
make use of electromagnetic radiation.
s
Choose devices that use radiation from
18. (a) Copy Figure 2 into your notebook. Use light
three different parts of the electromagnetic
rays to locate the image.
spectrum.
(b) Describe the image characteristics.
(b) List the devices in order of increasing energy.
(11.1) A
24. (a) Explain how a wax coating changes a surface

F F
in terms of specular and diff use refl ection.
(b) Describe a process that would have the
Figure 2 opposite effect on a surface. (11.6) A
NEL UR-F08-UDOS10SB.ai Unit E Self-Quiz 597

Nelson Science Perspectives 10

Uploaded by

Copyright:

Available Formats

Nelson Science Perspectives 10

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nelson Science Perspectives 10

Uploaded by

Copyright:

Available Formats

Grade 10 Author Team Senior Program Consultant

Christine Adam-Carr Maurice DiGiuseppe, Ph.D.

Senior Program Consultant Authors Contributing Authors

Vice President, Publishing Contributing Editor Cover Image

General Manager, Mathematics, Editorial Assistants Asset Coordinators

NEL Reviewers iii

Discover Your Textbook . . . . . . . . . . . . . . . . xii CHAPTER 2

SYSTEMS OF LIVING THINGS . . . . . . 20 Citizen Action: Cancer Education

3.8 The Musculoskeletal System . . . . . . . . . . . . . . . 99 4.6 Plant Growth . . . . . . . . . . . . . . . . . . . . . . . . . . 143

3.9 PERFORM AN ACTIVITY: Key Concepts Summary . . . . . . . . . . . . . . . . . . . . . . . 148

NEL Contents vii

viii Contents NEL

might be learning in the unit. OVERALL ASPIRIN AND HEROIN

The Overall Expectations investigate,

describe what you should be

able to do after completing

The Big Ideas summarize

remember after you complete

What Do You Already Know?

Unit Task Preview UNIT

Unit Task Bookmark

When you see the Unit Task (c) table salt

section relates to the Unit Task.

UNIT TASK Preview

• plan and conduct a test of the model

how you will demonstrate what

xii Discover Your Textbook NEL

Chapter Opener 5 Chemicals and

The Key Concepts

main ideas and skills

Ionic compounds are Molecular compounds Many consumer products

This is an artist’s impression of a space elevator. We would require

ENGAGE IN WHAT DO YOU

Engage in SCIENCE THINK? What Do You Think?

These articles form an opinion by agreeing or

interesting real-world of space.

science. attached to a point on Earth’s equator. At the other end,

Focus on Reading/ FOCUS ON FOCUS ON

Focus on Writing READING WRITING

strategies help you learn

science concepts and develop READING TIP

literacy skills in preparation for

• fire causes explosions

an arsonist might have

the text. Writing Tips provide

improve your writing skills.

NEL Discover Your Textbook xiii

Vocabulary Weather and Climate 8.1

Learning Tips are useful

Describing the Weather

bold print. Their definitions can be found in the

book. you are reading.

NEL 8.1 Weather and Climate 319

These are quick, fun activities

designed to help you

understand concepts and

Chemical symbol Chemical symbols

investigations and activities.

They will be in red print with a

xiv Discover Your Textbook NEL