Airworthiness Directive: Design Approval Holder's Name: Type/Model Designation(s)
Airworthiness Directive: Design Approval Holder's Name: Type/Model Designation(s)
Airworthiness Directive: Design Approval Holder's Name: Type/Model Designation(s)
: 2021-0081
Airworthiness Directive
AD No.: 2021-0081
Issued: 18 March 2021
Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation
(EU) 2018/1139 on behalf of the European Union, its Member States and of the European third
countries that participate in the activities of EASA under Article 129 of that Regulation.
This AD is issued in accordance with Regulation (EU) 748/2012, Part 21.A.3B. In accordance with Regulation (EU) 1321/2014 Annex I, Part M.A.301, the
continuing airworthiness of an aircraft shall be ensured by accomplishing any applicable ADs. Consequently, no person may operate an aircraft to which
an AD applies, except in accordance with the requirements of that AD, unless otherwise specified by the Agency [Regulation (EU) 1321/2014 Annex I,
Part M.A.303] or agreed with the Authority of the State of Registry [Regulation (EU) 2018/1139, Article 71 exemption].
Manufacturer(s):
Irkut Corporation (Irkut) Joint Stock Company (JSC), formerly Sukhoi Civil Aircraft, JSC
Applicability:
RRJ-95B aeroplanes, all serial numbers.
Definitions:
For the purpose of this AD, the following definitions apply:
The AMP: The approved Aircraft Maintenance Programme (AMP) on the basis of which the
operator or the owner ensures the continuing airworthiness of each operated aeroplane. For
affected RRJ-95B aeroplanes operated under EU regulation, compliance with the approved AMP is
required by Commission Regulation (EU) 1321/2014, Part M.A.301, paragraph 3.
New and/or more restrictive tasks and limitations: This includes all tasks and limitations that are
new and all tasks and limitations for which a threshold or interval was reduced, which were
TE.CAP.00110-010 © European Union Aviation Safety Agency. All rights reserved. ISO9001 Certified. Page 1 of 4
Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet.
An agency of the European Union
EASA AD No.: 2021-0081
introduced into the ALS (as defined in this AD) since the previous ALS Revision that is currently
incorporated in the AMP.
Reason:
The airworthiness limitations for the Irkut RRJ-95B aeroplanes, which are approved by EASA, are
currently defined and published in the Irkut RRJ-95B ALS document. These instructions have been
identified as mandatory for continued airworthiness.
EASA previously issued AD 2020-0047, requiring the actions described in Irkut RRJ-95B MM
M7.92.0AMM.004.000.EN, Chapter 04 ALS, Issue 01, Revision 03.
Since that AD was issued, Irkut published the ALS, as defined in this AD, introducing new and/or
more restrictive tasks and limitations.
For the reason described above, this AD retains the requirements of EASA AD 2020-0047, which is
superseded, and requires accomplishment of the actions specified in the ALS.
(1.1) Replace each component before exceeding the applicable life limit; and
(1.2) Within the thresholds and intervals, accomplish all applicable maintenance tasks.
Corrective Action(s):
(2) In case of finding discrepancies during accomplishment of any task as required by paragraph (1)
of this AD, before next flight, accomplish the applicable corrective action(s) in accordance with
the applicable Irkut maintenance documentation. If a detected discrepancy cannot be corrected
by using existing Irkut instructions, before next flight, contact Irkut for EASA approved
instructions and accomplish those instructions accordingly.
AMP Revision:
(3) Within 12 months after the effective date of this AD, revise the approved AMP by incorporating
the limitations, maintenance tasks and associated thresholds and intervals described in the ALS,
as applicable, depending on aeroplane configuration.
TE.CAP.00110-010 © European Union Aviation Safety Agency. All rights reserved. ISO9001 Certified. Page 2 of 4
Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet.
An agency of the European Union
EASA AD No.: 2021-0081
Credit:
(4) If, before the effective date of this AD, the AMP has been revised to incorporate the
maintenance tasks and life limitations as specified in the previous ALS revision, that action
ensures the continued accomplishment of those tasks and limitations.
Consequently, for an aeroplane to which that AMP applies, it is acceptable to accomplish the
new and/or more restrictive tasks and limitations as specified in the ALS, as applicable,
depending on aeroplane configuration, within the compliance times as specified in the ALS to
comply with paragraph (1) of this AD.
For that AMP, it is acceptable to incorporate the new and/or more restrictive tasks and
limitations as specified in the ALS, as applicable, depending on aeroplane configuration, into
the AMP to comply with paragraph (3) of this AD.
Recording AD Compliance:
(5) When the AMP of an aeroplane has been revised as required by paragraph (3) or (4) of this AD,
as applicable, that action ensures continued accomplishment of the tasks as required by
paragraphs (1) and (2) of this AD for that aeroplane. Consequently, after revising the AMP, as
required by paragraph (3) or (4) of this AD, as applicable, it is not necessary that
accomplishment of individual action is recorded for demonstration of AD compliance on a
continued basis.
Ref. Publications:
Irkut RRJ-95B MM M7.92.0AMM.004.000.EN, Chapter 04 ALS, Issue 01, Revision 05 dated 21
October 2020.
The use of later approved issues or revisions of the above-mentioned document is acceptable for
compliance with the requirements of this AD.
Remarks:
1. If requested and appropriately substantiated, EASA can approve Alternative Methods of
Compliance for this AD.
2. This AD was posted on 29 January 2021 as PAD 21-008 for consultation until 26 February 2021.
No comments were received during the consultation period.
3. Enquiries regarding this AD should be referred to the EASA Safety Information Section,
Certification Directorate. E-mail: ADs@easa.europa.eu.
4. Information about any failures, malfunctions, defects or other occurrences, which may be
similar to the unsafe condition addressed by this AD, and which may occur, or have occurred on
a product, part or appliance not affected by this AD, can be reported to the EU aviation safety
reporting system. This may include reporting on the same or similar components, other than
those covered by the design to which this AD applies, if the same unsafe condition can exist or
may develop on an aircraft with those components installed. Such components may be
installed under an FAA Parts Manufacturer Approval (PMA), Supplemental Type Certificate
(STC) or other modification.
TE.CAP.00110-010 © European Union Aviation Safety Agency. All rights reserved. ISO9001 Certified. Page 3 of 4
Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet.
An agency of the European Union
EASA AD No.: 2021-0081
5. For any question concerning the technical content of the requirements in this AD, please
contact: Regional Aircraft – Branch of the Irkut Corporation - Public Company, 26 bld. 5
Leninskaya Sloboda street, Moscow, 115280, Russia;
Telephone: +7 (495) 727 19 88, Fax: +7 (495) 727 19 83, E-mail: airworthiness@scac.ru.
TE.CAP.00110-010 © European Union Aviation Safety Agency. All rights reserved. ISO9001 Certified. Page 4 of 4
Proprietary document. Copies are not controlled. Confirm revision status through the EASA-Internet/Intranet.
An agency of the European Union