PA247CV

Series LCD Monitor

User Guide
 First Edition
October 2020

Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.

ii
Contents

Contents....................................................................................................... iii
Notices.......................................................................................................... iv
TCO certified................................................................................................ vi
Safety information...................................................................................... vii
Care & Cleaning......................................................................................... viii
Takeback Services....................................................................................... ix
Chapter 1: Product introduction
1.1 Welcome! ..................................................................................... 1-1
1.2 Package contents.......................................................................... 1-1
1.3 Monitor introduction..................................................................... 1-2
1.3.1 Front view........................................................................ 1-2
1.3.2 Back view......................................................................... 1-3
1.3.4 Other Function(s)............................................................. 1-4
Chapter 2: Setup
2.1 Assembling the monitor arm/base.............................................. 2-1
2.2 Detaching the arm/base (for VESA wall mount)......................... 2-1
2.3 Adjusting the monitor................................................................... 2-2
2.4 Connecting the cables.................................................................. 2-3
2.5 Turning on the monitor................................................................. 2-4
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure........................................................... 3-1
3.1.2 OSD function introduction................................................ 3-2
3.2 Specifications summary............................................................. 3-10
3.3 Outline dimensions..................................................................... 3-12
3.4 Troubleshooting (FAQ)............................................................... 3-13
3.5 Supported operating modes...................................................... 3-14

iii
 Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.

ENERGY STAR complied product

ENERGY STAR is a joint program of the U.S. Environmental
Protection Agency and the U.S. Department of Energy helping us all
save money and protect the environment through energy efficient
products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY
STAR standard, and the power management feature is enabled by default. The
monitor and computer are automatically set to sleep after 10 and 30 minutes of
user inactivity. To wake your computer, click the mouse or press any key on the
keyboard. Please visit http://www.energystar.gov/powermanagement for detail
information on power management and its benefits to the environment. In addition,
please visit http://www.energystar.gov for detail information on the ENERGY STAR
joint program.

iv
 NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating
system.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian
Interference - Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Réglement sur le matériel brouiller du Canada.

v
 TCO certified
A third-party certification according to ISO 14024

Toward sustainable IT products

Say hello
to a more sustainable product
IT products are associated with a wide range of sustainability risks
throughout their life cycle. Human rights violations are common in the
factories. Harmful substances are used both in products and their
manufacture. Products can often have a short lifespan because of poor
ergonomics, low quality and when they are not able to be repaired or
upgraded.

This product is a better choice. It meets all the criteria in TCO Certified,
the world’s most comprehensive sustainability certification for IT
products. Thank you for making a responsible product choice, that help
drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance

environmental and social responsibility. Conformity is verified by
independent and approved verifiers that specialize in IT products, social
responsibility or other sustainability issues. Verification is done both
before and after the certificate is issued, covering the entire validity
period. The process also includes ensuring that corrective actions are
implemented in all cases of factory non-conformities. And last but not
least, to make sure that the certification and independent verification is
accurate, both TCO Certified and the verifiers are reviewed regularly.

Want to know more?

Read information about TCO Certified, full criteria documents, news and
updates at tcocertified.com. On the website you’ll also find our Product
Finder, which presents a complete, searchable listing of certified
products.

vi
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in fire
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.

This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.

AEEE yönetmeliğine uygundur

vii
 Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

viii
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.

Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.

Product information for EU energy label

ix
x
1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!

1.2 Package contents

Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power cord
HDMI cable (optional)
DisplayPort cable (optional)
USB C to A cable (optional)
USB C to C cable (optional)
Color calibration testing report
ProArt welcome card

If any of the above items is damaged or missing, contact your retailer

immediately.

ASUS PA247CV Series LCD Monitor 1-1

 1.3 Monitor introduction
1.3.1 Front view

6 5 4 3 2 1

1. Power button/power indicator

• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
White On
Amber Standby mode
Off Off

2. Menu button:
• Press this button to display the OSD menu when the OSD is off.
• Enters the OSD menu.
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
3. Close button:
• Press this button to display the OSD menu when the OSD is off.
• Exits the OSD menu.
4. Input select button:
• Press this button to display the OSD menu when the OSD is off.
• Selects an available input source.

1-2 Chapter 1: Product introduction

 Press button (Input Select button) to display HDMI, DisplayPort, USB
type-C ( ) signals after you connect HDMI/DisplayPort/USB Type-C cable
with the monitor.

5. Shortcut
• Press this button to display the OSD menu when the OSD is off.
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
6. Shortcut
• Press this button to display the OSD menu when the OSD is off.
• Default: Blue light filter hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 2 menu.

1.3.2 Back view

10

1 2 3 4 5 6 7 8 9

1. Power switch. Press the switch to turn on/off power.

2. AC-IN port. This port connects the power cord.
3. Earphone jack. This port is only available when an HDMI/DisplayPort cable
is connected.
4. HDMI port. This port is for connection with an HDMI compatible device.
5. DisplayPort in. This port is for connection with a DisplayPort compatible
device.
6. USB 3.1 Type-C. This port is for connection with a USB upstream cable. The
connection supports USB power and data delivery.
This monitor is Super-Speed USB 3.1 compatible (5Gbps). The port offers
Max. 65W power delivery with output voltage 5V/3A, 9V/3A, 12V/3A, 15V/3A
and 20V/3.25A. Connecting the USB Type-C cable can input the DisplayPort
source, output power and enable the USB Type-A ports (downstream) on the
monitor. Connecting the USB Type-C to Type-A cable only enables the USB
Type-A ports (downstream) on the monitor.

7. Daisy-Chain DisplayPort output. This port allows you to connect multiple

DisplayPort compatible monitors.

ASUS PA247CV Series LCD Monitor 1-3

 8. USB 3.1 Type A. These ports are for connection with USB devices, such as
USB keyboard/mouse, USB flash drive, etc.
9. Kensington lock slot.
10. USB 3.1 Type A. These ports are for connection with USB devices, such as
USB keyboard/mouse, USB flash drive, etc.

Port with icon is BC1.2 compliant.

1.3.4 Other Function(s)

1. Daisy chaining (for selected models)
The monitor supports daisy chain on DisplayPort. Daisy Chaining allows up to 4
monitors to be connected in series with the video signal being passed from the
source to a monitor (when the input source is 1920 x 1080@60Hz and no USB-C
device is connected). In order to enable daisy chaining, please make sure the
source transported.
This function is only available when DisplayPort Stream in the OSD menu
is DisplayPort 1.2 and Auto Source Detection is OFF. If you set DisplayPort
Stream to DisplayPort 1.1, all the connected monitor will display the same
content at the same time (clone).

1920 x1080 @60Hz

or

1920 x1080 @75Hz

1920 x1080 @60Hz

1-4 Chapter 1: Product introduction

2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Attach the base into the arm, making sure the tab on the arm fits into the
groove on the base.
3. Fix the base to the arm by fastening the bundled screw.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.

Base screw size: M6 x 16.5 mm.

2.2 Detaching the arm/base

(for VESA wall mount)
The detachable arm/base of this monitor is specially designed for VESA wall
mount.
To detach the arm/base:
1. Have the front of the monitor face down on a table.
2. Press the release button, and then detach the arm/base from the monitor
(Figure 1).
2

(Figure 1)

We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.

ASUS PA247CV Series LCD Monitor 2-1

 • The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)

2.3 Adjusting the monitor

• or optimal viewing, we recommend that you look at the full face of the
F
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• You can adjust the monitor’s angle from +35˚ to -5˚and it allows 90˚ swivel
adjustment from either left or right. You can also adjust the monitor’s height
within +/- 130 mm.
-5° ~ +35°

130mm

90° 90°

(Tilt) (Swivel) (Height adjustment)

Pivoting the monitor

1. Lift the monitor to the highest position.
2. Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise/counterclockwise to the angle you need.
90°

90°

It is normal that the monitor slightly shakes while you adjust the viewing angle.

2-2 Chapter 2: Setup

2.4 Connecting the cables
Connect the cables as the following instructions:

• To connect the power cord: Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
• To connect the HDMI/DisplayPort/USB Type-C* cable:
a. Plug one end of the HDMI/DisplayPort/USB Type-C* cable to the
monitor’s HDMI/DisplayPort/USB Type-C jack.
b. Connect the other end of the HDMI/DisplayPort/USB Type-C* cable to
your device’s HDMI/DisplayPort/USB Type-C jack.
It is suggested to use USB cerified Type-C cable. If the signal source supports
DP Alt mode, all video, audio and data signal can be transmitted.

• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort/USB Type-C signal is fed.
• To use the USB upstream/downstream function:
» Upstream: Use an USB Type-C cable and plug on end of the Type-C
connector to the monitor's USB 3.1 Type-C port ( ) as upstream
and the other end to your computer's USB Type-C jack. Or use an
USB Type-C to Type-A cable and plug the Type-C connector to the
the monitor's USB 3.1 Type-C port ( ) as upstream and the Type-A
connector to your computer's USB Type-A jack. Make sure your
computer is installed with the latest Windows 7/Windows 10 operating
system. That will enable the USB ports on the monitor to work.
» Downstream: Use an USB cable to connect your device with the
monitor's USB Type A jack.

When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.

ASUS PA247CV Series LCD Monitor 2-3

 2.5 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.

2-4 Chapter 2: Setup

3.1 OSD (On-Screen Display) menu

3.1.1 How to reconfigure

ASUS PA247CV
ProArt Preset Standard Mode DisplayPort 1920 x 1080@ 60Hz

Standard Mode

sRGB Mode

Rec. 709 Mode

DCI-P3 Mode

Scenery Mode

Reading Mode

Darkr oom Mode

1. Press any button (except the Power button) to display the OSD menu.
2. Press the Menu button to activate the OSD menu.
3. Press the buttons as indicated on the screen to navigate through the
functions. Highlight the desired function and press to activate it. If the
function selected has a sub-menu, press and again to navigate
through the sub-menu functions. Highlight the desired sub-menu function and
press to activate it.
4. Press and to change the settings of the selected function.
5. To exit and save the OSD menu, press or repeatedly until the OSD menu
disappears. To adjust other functions, repeat steps 1-4.

ASUS PA247CV Series LCD Monitor 3-1

 3.1.2 OSD function introduction
1. ProArt Preset
This function contains 10 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
ASUS PA247CV
ProArt Preset Standard Mode DisplayPort 1920 x 1080@ 60Hz

Standard Mode

sRGB Mode

Rec. 709 Mode

DCI-P3 Mode

Scenery Mode

Reading Mode

Darkroom Mode

• Standard Mode: Best choice for document editing.

• sRGB Mode: Compatible with sRGB color space, sRGB mode is the best
choice for document editing.
sRGB Mode meets Energy Star® requirements.

• Rec. 709 Mode: Compatible with Rec. 709 color space.

• DCI-P3 Mode: Compatible with DCI-P3 color space.
• Scenery Mode: Best choice for scenery photo display.
• Reading Mode: This is the best choice for book reading.
• Darkroom Mode: This is the best choice for a weak ambient light
environment.
• Rapid Rendering Mode: Simulates display as high refresh rate
performance to generate different backlight frequencies.

Rapid Rendering Mode can only be activated at 75Hz.

To activate this function, you need to do the following: turn off Adaptive-Sync.
Brightness, Blue Light Filter, ASCR, Trace Free cannot be adjusted when using
this function.
• User Mode 1/User Mode 2: Allows you to make color adjustments in the
Advanced Setting.

3-2 Chapter 3: OSD (On-Screen Display) menu

Below table shows the default configurations for each ProArt Preset mode:
Rapid User Mode
Standard sRGB Rec. 709 DCI-P3 Scenery Reading Darkroom
Function Rendering 1/User
Mode Mode Mode Mode Mode Mode Mode
Mode Mode 2
Enable
Enable Disable Enable Enable Enable Enable Enable
Color Temp. (P3- Disable
(6500K) (6500K) (6500K) (6500K) (6500K) (6500K) (6500K)
Theater)
Enable
Enable Disable Enable Enable Enable Enable Enable Enable
Brightness (50) 100
(50) (100 nits) (50) (100) (15) (4) (50) (50)
nits
Enable Enable Enable Enable Enable Enable Enable Enable Enable
Contrast
(80) (80) (80) (80) (80) (80) (80) (80) (80)
Enable Enable Enable Enable
ASCR Disable Disable Disable Disable Disable
(Off) (Off) (Off) (Off)
Enable Enable Enable Enable Enable Enable Enable Enable Enable
Sharpness
(0) (0) (0) (0) (0) (0) (0) (0) (0)
Enable Enable Enable Enable Enable Enable Enable
Saturation Disable Disable
(50) (50) (50) (50) (50) (50) (50)
Enable Enable Enable Enable Enable Enable Enable
Hue Disable Disable
(50) (50) (50) (50) (50) (50) (50)
ProArt
Enable Disable Enable Enable Enable Enable Enable Enable Disable
Palette
Black Level Enable Enable Enable Enable Enable Enable Enable Enable Disable
Enable Disable Enable Enable Enable Enable Enable
Gamma Disable Disable
(2.2) (2.2) (2.4) (2.2) (2.2) (2.2) (2.2)

2. Blue Light Filter

In this function, you can adjust the blue light filter level.
ASUS PA247CV
Blue Light Filter Standard Mode DisplayPort 1920 x 1080@ 60Hz

Level 0

Level 1

Level 2

Level 3

Level 4

• Level 0: No change.
• Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Standard Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.

ASUS PA247CV Series LCD Monitor 3-3

 Please refer to the following to alleviate eye strains:

• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).

3. ProArt Palette
Set a desired color setting from this menu.
ASUS PA247CV
ProArt Palette Standard Mode DisplayPort 1920 x 1080@ 60Hz

Brightness

Contrast

Saturation

Hue

Color Temp.

Gamma

Black Level

• Brightness: The adjusting range is from 0 to 100.

• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Hue: Shifts the image color between green and purple.
• Color Temp.: Contains 5 modes including 9300K, 6500K, 5500K, 5000K
and P3-Theater.

P3-Theater is only available when DCI-P3 Mode is selected.

• Gamma: Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8
(Mac).

3-4 Chapter 3: OSD (On-Screen Display) menu

 • Black Level: To adjust the initialized 1st signal level of darkest gray level.
• Color:
* Six-axis Hue adjustment.
* Six-axis Saturation adjustment.
* Adjusts the gain levels for R, G, B.
* Adjusts the black level offset values for R, G, B.
• Color Reset:
* Current mode color reset:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.
4. Image
Set the image related setting from this menu.
ASUS PA247CV
Image Standard Mode DisplayPort 1920 x 1080@ 60Hz

Sharpness

Trace Free

Aspect Control

Input Range

ASC R

• Sharpness: The adjusting range is from 0 to 100.

• Trace Free: Adjusts the response time of the monitor.
• Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1, or OverScan.

4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.

• Input Range: To map signal range with whole black to white presented
range of display.
• ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.

ASUS PA247CV Series LCD Monitor 3-5

 5. Sound
You can adjust Volume, Mute and Source from this menu.
ASUS PA247CV
Sound Standard Mode DisplayPort 1920 x 1080@ 60Hz

Volume

Mute

Sourc e

• Volume: the adjusting range is from 0 to 100.

• Mute: toggles the monitor sound between on and off.
• Source: decides the monitor sound comes from which source.
6. Input Select
In this function, you can select your desired input source.
ASUS PA247CV
Input Select Standard Mode DisplayPort 1920 x 1080@ 60Hz

HDMI

Displ ayPort

USB Type-C

Auto Source Detection

3-6 Chapter 3: OSD (On-Screen Display) menu

7. System Setup
Allows you to adjust the system.
ASUS PA247CV
System Setup Standard Mode DisplayPort 1920 x 1080@ 60Hz

Adaptive-Sync

Power Saving

OSD Setup

Qui ckFit

DisplayPort Stream

Key Lock

Power Indicator

• Adaptive-Sync: Allows an Adaptive-Sync supported* graphics source

to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.

* Adaptive-Sync can only be activated within 48Hz ~ 75Hz.

* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: set DisplayPort Stream to
DisplayPort 1.2.

• Power Saving:
* “Normal Level” allows the USB downstream ports/USB Type-C
ports to charge external devices when the monitor enters power
saving mode.
* “Deep Level” does not allow all ports to charge external devices
and keeps USB signal from being automatically detected when
the monitor enters power saving mode.
• OSD Setup:
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.

ASUS PA247CV Series LCD Monitor 3-7

 • QuickFit: Allows users to have a preview of the document or photo layout
directly on screen without printing test copies.
* Alignment: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.

Alignment Grid

* B5: Provides users to view their documents in real size on the

screen.

B5

* Ruler: This pattern presents physical ruler on top and left side. You
can press the Return button for longer than 3 seconds to switch
the measurements between metric and imperial.
5 10 15 20 25 30

10

15

• DisplayPort Stream: Compatibility with graphic card. Select DisplayPort

1.1 or DisplayPort 1.2 by graphic card DP version.
• Key Lock: To disable all function keys. Press the second button from the
top over five seconds to cancel the key lock function.
• Power Indicator: Turns the power LED indicator on/off.
• Language: There are 21 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.

3-8 Chapter 3: OSD (On-Screen Display) menu

8. Shortcut
Defines the functions for Shortcut 1 and 2 buttons.
ASUS PA247CV
Shortcut Standard Mode DisplayPort 1920 x 1080@ 60Hz

Shortcut 1

Shortcut 2

• Shortcut 1/Shortcut 2: Selects a function for Shortcut 1 and 2 buttons.

When a certain function is selected or activated, your shortcut key may

not support. Available function choices for shortcut: Blue Light Filter,
Brightness, Contrast, Color Temp.,Volume, sRGB Mode, Rec. 709 Mode,
User Mode 1, User Mode 2.

ASUS PA247CV Series LCD Monitor 3-9

 3.2 Specifications summary
Panel Type TFT LCD
Panel size 23.8” (16:9, 60.47 cm) wide screen
Max. Resolution 1920 x 1080
Pixel pitch 0.2745 mm x 0.2745 mm
Brightness (Typ.) 300 cd/m2
Contrast Ratio (Typ.) 1000:1
Contrast Ratio (Max.) 100,000,000:1 (with ASCR on)
Viewing angle (H/V) CR>10 178˚/178˚
Display colors 16.7 M
Response time < 5 ms (grey to grey)
ProArt Preset selection 10 color preset modes
Auto adjustment No
Color temperature selection 5 color temperatures
Analog input No
Digital input DisplayPort v1.2, HDMI v1.4, DisplayPort over USB
Type C
Digital Output DisplayPort
Earphone jack Yes
Audio input No
Speaker (Built-in) 2 W x 2 Stereo, RMS
USB 3.1 port Upstream x 1, Downstream x 4
Colors Black
Power LED White (On)/Amber (Standby)
Tilt +35˚~ -5˚
Pivot +90˚~ -90˚
Swivel +90˚~ -90˚
Height Adjustment 130 mm
Kensington lock Yes
AC input voltage AC: 100~240V
Power consumption Power On: < 18 W** (Typ.), Standby: < 0.5 W (Typ.),
Power Off: 0 W (Switch off)
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimension (W x H x D) without 539.7 x 329.9 x 52.8 mm
stand
Dimension (W x H x D) with 539.7 x 471.8 x 211.4 mm (highest),
stand 539.7 x 341.8 x 211.4 mm (lowest),
632 x 450 x 216 mm (package)
Weight (Esti.) 6.3 kg (Net); 4.2 kg (without stand); 8.3 kg (Gross)
Multi-languages 21 languages (English, French, German, Italian,
Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish,
Simplified Chinese, Traditional Chinese, Japanese,
Korean, Thai, Indonesian, Persian)

3-10 Chapter 3: OSD (On-Screen Display) menu

Accessories Quick start guide, warranty card, power cord, HDMI
cable (optional), DisplayPort cable (optional), USB
C to A cable (optional), USB C to C cable (optional),
color calibration testing report, ProArt welcome card
Compliance and Standards cTUVus, FCC, ICES-3, EPEAT Bronze, CB, CE,
ErP, WEEE, TUV-GS, TUV-Ergo, ISO 9241-307,
UkrSEPRO, CU, CCC, CEL, BSMI, RCM, MEPS,
VCCI, PSE, PC Recycle, J-MOSS, KC, KCC,
e-Standby, PSB, Energy Star 8.0, TCO, RoHS, TUV-S
mark, CEC, TUV Flicker Free, TUV Low Blue Light
*Specifications are subject to change without notice.
**Measuring a screen brightness of 200 nits without audio/USB/Card reader connection.

ASUS PA247CV Series LCD Monitor 3-11

 3.3 Outline dimensions

*Unit: mm(inch)
ASUS PA247CV Outline Dimension
Pivot: +/-90 Degree
90
°
90
°

Tilt: +35/-5 Degree

35°
5°

460.4 [18.10]

329.9 [12.96]

296.5 [11.65] Active -A rea

211.4 [8.31] 148.2 [5.83]

263.5 [10.36]

527 [20 .71] Active-Area

262.7 [10.32]

539.7 [21.21]

Swivel: +/-90 Degree

90
°

25.1 [0.99] 304.8 [11.98]

343 [13 .48]

58.8 [2.31]

52.8 [2.08]

140.7 [5.53]

11 8 .3 [4.65]

178.1 [7.00] 117.4 [4.62]

295.6 [11.62]

311.8 [12.25]

470.8 [18.50]
90

341.8 [13.43]
°

13 0 .0 [5.11]
44.5 [1.75]

58.8 [2.31]

13 0 [5.11
]
179 [7.03]

295.6 [11.62]

311.8 [12.25]

130.5 [5.13]
100 [3.93]

100 [3.93]

3-12 Chapter 3: OSD (On-Screen Display) menu

3.4 Troubleshooting (FAQ)
Problem Possible Solution

Power LED is not ON • Press the button to check if the monitor

is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
The power LED lights amber and there is • Check if the monitor and the computer are
no screen image in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is • Make sure the signal cable is properly
present in the image connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does • Inspect the signal cable and make sure
not look white) that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
No sound or sound is low • Ensure that the HDMI/DisplayPort/USB
C to C cable is properly connected to the
monitor and the computer.
• Adjust the volume settings of both your
monitor and HDMI/DisplayPort/USB C
device.
• Ensure that the computer sound card
driver is properly installed and activated.

ASUS PA247CV Series LCD Monitor 3-13

 3.5 Supported operating modes
Resolution Frequency Horizontal Vertical Frequency Pixel (MHz)
Frequency (KHz) (Hz)
640x480 31.47(N) 59.94(N) 25.18
640x480 35.00(N) 66.66(N) 30.24
640x480 37.87(N) 72.82(N) 31.5
640x480 37.5(N) 75.00(N) 31.5
720x400 31.47(N) 70.08(P) 28.32
800x600 35.16(P) 56.25(P) 36
800x600 37.88(P) 60.32(P) 40
800x600 48.08(P) 72.12(P) 50
800x600 46.86(P) 75.00(P) 49.5
832X624 49.72(P/N) 74.55(P/N) 57.28
1024x768 48.36(N) 60.00(N) 65
1024x768 56.476(N) 70.069(N) 75
1024x768 60.02(N) 75.00(N) 78.75
1152x864 67.5(P/N) 75.00(P/N) 108
1280x720 45.00(P) 60.00(N) 75.25
1280x768 47.78(P) 60.00(N) 79.5
1280x800 49.7(P) 60.00(N) 83.5
1280x960 60.00(P) 60.00(N) 108
1280x1024 63.98(P) 60.02(N) 108
1280x1024 79.98(P) 75.02(N) 135
1360x768 47.712(P) 59.79(P) 85.5
1366x768 47.712(P) 59.79(P) 85.5
1440x900 55.94(N) 59.89(P) 106.5
1600x1200 75.00(P) 60.00(P) 162
1680x1050 65.29(P) 60.00(P) 146.25
1920x1080 67.5(P) 60.00(P) 148.5
1920x1080 84.64(N) 74.90(P) 220.75
“P” / “N” stands for “Positive” / “Negative” polarity of incoming H-sync/V-sync (input timing).
When the monitor is operating in the video mode (ie, not displaying data), the following high
definition modes shall be supported in addition to standard definition video.

3-14 Chapter 3: OSD (On-Screen Display) menu

Timing Name Pixel Format Horizontal Vertical Pixel Rate
Frequency (kHz) Frequency (Hz) (MHz)
480p 720 x 480 31.469 60 27
720p60 1280 x 720 45 60 74.25
576p 720 x 576 31.25 50 27
720p50 1280 x 720 37.5 50 74.25
1080p60 1920 x 1080 67.5 60 148.5
1080p50 1920 x 1080 56.25 50 148.5

ASUS PA247CV Series LCD Monitor 3-15