DS - D015 - JetLAN6A F - FTP 4PR Dca
DS - D015 - JetLAN6A F - FTP 4PR Dca
DS - D015 - JetLAN6A F - FTP 4PR Dca
STANDARDS
ANSI/TIA-568-C.2
IEC 61156-5
EN 50288-10-1
EN 50173
ISO/IEC 11801
EN 50575
EN 50399
EN 13501-6
CONSTRUCTION
(Not at scale)
APPLICATIONS
1 – Conductor: 23 AWG, Solid Bare Annealed Copper.
10BASE-T (IEEE 802.3) 2 – Insulation: Polyolefin Foam-Skin.
4/16 Mbps TOKEN RING (IEEE 802.5) 3 – Varying short pair lay-length (4 pairs).
100BASE-VG-AnyLAN Individual Aluminium/polyester shielding.
100 Mbps TP-PMD (ANSI X3T9.5) 4 – Tinned Copper drain wire.
100BASE-T (IEEE 802.3) 5 – Overall Aluminium/polyester shielding.
55/155 Mbps ATM 6 – Sheath: LSZH material.
1000BASE-T (Gigabit Ethernet) ELECTRICAL AND DIMENSIONAL CHARACTERISTICS
1.2 / 2.4 Gbps ATM
10G BASE-T
Max. dc resistance (Ω/km) @20ºC: 95.0
REACTION TO FIRE Nom. mutual capacity (nF/km)@1kHz: 56
NVP (% of light speed): 70
Class: Dca-s2,d2,a1 Mean input impedance (Ω): 100 ± 5 @ 100MHz
Propagation delay (ns@10MHz): max. 518
(according to EN 13501-6) Delay skew (ns/100m): max. 40
Coupling Att dB (min.): @30-100MHz 75
COLOUR CODES @100-1000MHz 75-20log(f/100)
Max. pulling tension (N): 80
Note: DATA cables are not suitable for low impedance applications as: heating, lighting, etc…
No reproduction without the written consent of General Cable –General Cable reserves the right to change the specifications for improvement without notice.