Service Manual: 19990220-99800 Hamamatsu, Japan

SERVICE MANUAL
CONTENTS
SPECIFICATIONS ................................................ 3/4
PANEL LAYOUT .................................... 5
CIRCUIT BOARD LAYOUT ................. 7
BLOCK DIAGRAM ............................ 8
DISASSEMBLY PROCEDURE .............................. 9
LSI PIN DESCRIPTION .............................. 11
IC BLOCK DIAGRAM ................................. 11
CIRCUIT BOARDS ...................................... 12
INSPECTION .............................................................. 15
MIDI INPLEMENTATION CHART .......................................... 25
PARTS LIST
PA 011457 HAMAMATSU, JAPAN

19990220-99800 1.96K-296 Printed in Japan ’99.03
EMX860ST
IMPOR TANT NOTICE

This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed
that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and under-
stood by the users, and have therefore not been restated.
WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components and failure of the product to perform as specified. For
these reasons, we advise all Yamaha product owners that all service required should be performed by an
authorized Yamaha Retailer or the appointed service representative.
IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certifi-
cation, recognition of any applicable technical capabilities, or establish a principal-agent relationship of
any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and
service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable
and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor’s Service Division.
WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may
have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect
to this buss.)
IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power
to the unit.
LITHIUM BA TTER Y HANDLING

This product uses a lithium battery for memory back-up.
WARNING : Lithium batteries are dangerous because they can be exploded by improper handling. Observe the following pre-
cautions when handling or replacing lithium batteries.
Leave lithium battery replacement to qualified service personnel.
Always replace with batteries of the same type.
When installing on the PC board by soldering, solder using the connection terminals provided on the battery cells.
Never solder directly to the cells. Perform the soldering as quickly as possible.
Never reverse the battery polarities when installing.
Do not short the batteries.
Do not attempt to recharge these batteries.
Do not disasemble the batteries.
Never heat batteries or throw them into fire.
ADVARSEL!
Lithiumbatteri-Eksplosionsfare ved fejlagtig handtering. Udskiftning ma kun ske med batteri af samme fabrikat og type. lever det brugte
batteri tilbage til leverandren.
VARNING
Explosionsfara vid felaktigt batteribyte.
Anvand samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren.
Kassera anvant batteri enligt fabrikantens instruktion.
VAROITUS
Paristo voi rajahtaa, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiiin.
Havita kaytetty paristo valmistajan ohjeiden mukaisesti.
The following information complies with Dutch official Gazette 1995. 45; ESSENTIALS OF ORDER ON THE COLLECTION OF BATTERIES.
• Please refer to the diassembly procedure for the removal of Back-up Battery.
• Leest u voor het verwijderen van de backup batterij deze beschrijving.
WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT
SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.
2
EMX860ST
SPECIFICATIONS
General specifications Input specifications

MAIN STEREO: 135 W+135 W/8Ω @0.5% THD at‹° kHz, 200 W+200 W/4Ω @0.5% THD at 1 kHz Input level
Maximum output power MAIN BRIDGE: 400 W/8Ω @0.5% THD at 1 kHz Actual load Nominal Connector
Input connectors PAD impedance impedance type
Sensitivity*1 Nominal level Max. before
MONITOR: 135 W/8Ω @0.5% THD at 1 kHz, 200 W/4Ω @0.5% THD at 1 kHz cliping
20 Hz–20 kHz +1 dB, –3 dB @1 W output into 8Ω (POWER AMP OUT)
Frequency response CH INPUT (Lo-Z) OFF 3 kΩ 50–600Ω Mics –62 dB (616 µV) –50 dB (2.45 mV) –20 dB (77.5 mV) XLR-3-31
20 Hz–20 kHz +1 dB, –3 dB @+4 dB output into 10 kΩ (MAIN OUT, MONITOR OUT, EFFECT OUT)
Less than 0.5% @20 Hz–20 kHz, 100 W output into 4Ω (POWER AMP OUT) (CH1–6) ON 600Ω Lines –32 dB (19.5 mV) –20 dB (77.5 mV) +10 dB (2.45 V) type
Total harmonic distortion CH INPUT (Hi-Z) OFF 10 kΩ 50–600Ω Mics –52 dB (1.95 mV) –40 dB (7.75 mV) –10 dB (245 mV) Phone jack
Less than 0.3% @20 Hz–20 kHz, +14 dB output into 10 kΩ (MAIN OUT, MONITOR OUT, EFFECT OUT)
–125 dB equivalent input noise, –68 dB residual output noise (POWER AMP OUT) (CH1–6) ON 600Ω Lines –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V) (TRS)*2
–95 dB residual output noise (MAIN OUT, MONITOR OUT, EFFECT OUT) MIC INPUT (CH7, 8) 3 kΩ 50–600Ω Mics –62 dB (616 µV) –50 dB (2.45 mV) –20 dB (77.5 mV) XLR-3-31 type*2
Hum & noise –80 dB (MAIN OUT) Master level control: nominal level, All channel level controls: minimum LINE INPUT (CH7, 8) (L, R) 10 kΩ 600Ω Line –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V) Phone jack
(Average, Rs=150Ω) –75 dB (MONITOR OUT) Master level control: nominal level, All channel level controls: minimum TAPE IN (L, R) 10 kΩ 600Ω Line –22 dBV (79.4 mV) –10 dBV (316 mV) +17.8 dBV (7 V) Phono jack
(with 20 Hz–20 kHz BPF) –71 dB (MAIN OUT) Master level control: nominal level, 1 channel level control: nominal level AUX IN (L, R) 10 kΩ 600Ω Line –22 dB (61.6 mV) –10 dB (245 mV) +20 dB (7.75 V) Phone jack*3
–84 dB (EFFECT OUT) Master level control: nominal level, All channel level controls: minimum *1. Sensitivity is the lowest level that can produce an output of +4 db (1.23 V) or the nominal output level when the unit is set at maximum gain.
*2. Balanced.
–64 dB (EFFECT OUT) Master level control: nominal level, 1 channel level control: nominal level *3. Unbalanced.
• 0 dB=0.775 Vrms, 0 dBV=1 Vrms.
86 dB CH IN (Lo-Z) to POWER AMP OUT (CH1–6)
66 dB CH IN (Lo-Z) to MAIN OUT, MONITOR OUT (CH1–6)
72 dB CH IN (Lo-Z) to EFFECT OUT (CH1–6)
Output specifications
Maximum voltage gain 48 dB CH IN (Lo-Z) to REC OUT (CH1–6)
(PAD: OFF) 56 dB CH IN (Hi-Z) to MAIN OUT, MONITOR OUT (CH1–6) Output level
Actual source Nominal
26 dB AUX IN to MAIN OUT Output connectors impedance impedance Connector type
24 dB TAPE IN to MAIN OUT Nominal Max. before cliping
66 dB MIC IN to MAIN OUT (CH7–8) MAIN AMP OUT (L, R) (A, B) 0.1Ω 4/8Ω Speaker 37.7 W/4Ω (200 W/4Ω) Phone jack
26 dB LINE IN to MAIN OUT (CH7–8)
MAIN BTL OUT 0.1Ω 8Ω Speaker 75.4 W/8Ω (400 W/8Ω) Phone jack
Crosstalk at 1 kHz –65 dB adjacent input, –65 dB input to output
MONITOR AMP OUT (A, B) 0.1Ω 8Ω Speaker 37.7 W/4Ω (200 W/4Ω) Phone jack
±15 dB Maximum
HIGH 10 kHz shelving MAIN OUT (L, R) 600Ω 10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
Input channel equalization MID 2.5 kHz peaking MONITOR OUT 600Ω 10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
LOW 100 Hz shelving
EFFECT OUT 600Ω 10 kΩ Lines +4 dB (1.23 V) +20 dB (7.75 V) Phone jack
* Turn over/roll-off frequency of shelving: 3 dB below maximum variable level.
Meters REC OUT (1, 2) 600Ω 10 kΩ Lines –10 dBV (316 mV) +10 dBV (3.16 V) Phono jack
5 POINTS LED METER (MAIN OUT L/R, MONITOR OUT)
7 bands (125, 250, 500, 1k, 2k, 4k, 8k Hz) • All output jacks are unbalanced.
Graphic equalizer • 0 dB=0.775 Vrms, 0 dBV=1 Vrms.
±12 dB Maximum (MAIN OUT, MONITOR OUT)
Internal digital effect 3 types (Vocal, L Hall, S Hall) Specifications are subject to change without prior notice.
+48 V is supplied to electrically balanced inputs for powering condenser microphones via 6.8 kΩ current
Phantom power
limiting/isolation resisters.
Limiter Comp. : THD 0.5% (MAIN, MONITOR)
LIMIT indicators Turns on. : THD 0.5% (MAIN, MONITOR)
Foot switch DIGITAL EFFECT MUTE : on/off
Optional accessories FC5 Foot switch
USA and Canada 120 V AC 60 Hz
Power requirement Europe 230 V AC 50 Hz
Other 240 V AC 50 Hz
Power consumption 300 W
Dimensions (WxHxD) 497x324x275 mm
Weight 17 kg
3
EMX860ST
4
EMX860ST
PANEL LAYOUT
Channel section
1 1 Equalizer controls (HIGH, MID, LOW)

2 Monitor controls (MONI)
HIGH
3 Effect control (EFFECT)
–15 +15 4 PAN control (BAL/PAN control for CH7/8)
MID 5 Level control (LEVEL)
1 6 Pad switch (PAD) (1-6 only)
–15 +15
LOW
–15 +15
MONI
2
0 10
EFFECT
3
0 10
PAN
4
L R
LEVEL
5
0 10
PAD
6
1
DIGITAL EFFECT section
7 Effect select switch

8 DIGITAL EFFECT ON switch
VOCAL
L HALL 7
S HALL
ON 8
DIGITAL
EFFECT
EFFECT section
9 EFFECT OUT control

9
0 10
EFFECT OUT
EFFECT
5
EMX860ST
MONITOR section
10
10 Graphic equalizer
11 EFFECT RTN control
–12 –12 +6
• • 12 MASTER control
6 6 +3
• •
0 0 0 13 13 Peak level indicator
• •
6 6 –5
• •
+12 +12 –10
125 250 500 1k 2k 4k 8k
11 12
0 10 0 10
EFFECT RTN MASTER
MONITOR
MAIN section
14
14 Graphic equalizer
15 EFFECT RTN control
–12 –12 +6
•
6
•
6 +3
16 AUX IN control
• •
0
•
0
•
0 19 17 TAPE IN
6 6 –5
•
+12
•
+12
18 MASTER control
–10
125 250 500 1k 2k 4k 8k L R
19 Peak level indicator
18
0 10 0 10 0 10 0 10
EFFECT RTN AUX IN TAPE IN MASTER
MAIN STEREO
15 16 17
POWER AMP section POWER indicator & PHANTOM switch

LIMITER
20 LIMITER indicator
MONI 21 Stereo/Bridge select switch 22 POWER
PHANTOM
+48V
MAIN 20 ON
OFF
L R
23
LIMITER
22 POWER indicator
L+R
BRIDGE 23 PHANTOM +48 V switch
21
STEREO
POWER
AMP
6
EMX860ST
CIRCUIT BOARD LAYOUT
Input/output panel
L LINE R L LINE R EFFECT

Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z Hi-Z (MONO) (MONO) OUT
POWERED MIXER SUB

L L
Lo-Z Lo-Z Lo-Z Lo-Z Lo-Z Lo-Z MIC MIC AUX IN MAIN(STEREO) MONITOR MIX
FOOT SW L (MONO) R L R
R R
INPUT TO MAIN TAPE REC OUTPUT

IN OUT
Power
1 2 3 4 5 6 transformer
MIX
1 Channel input jacks (Hi-Z, Lo-Z) 1-6

2 Channel input jacks (MIC/LINE) 7-8
3 Effect output jack (EFFECT OUT)
4 Foot switch jack (FOOT SW)
5 AUX IN/TAPE IN jacks
6 REC OUT/MONITOR/MAIN (STEREO) jacks
Rear panel
SPEAKERS POWER 1/3

L+R
MONITOR R BRIDGE L
POWER 2/3
POWER 3/3
B A B A B A
1 2
POWER
3
DIMENSIONS
ON/ OFF
W:497 D:275
16
1 SPEAKERS MONITOR jacks

2 SPEAKERS L/R/L+R BRIDGE jacks
3 Power switch
308
H:324
（単位）
16
Unit: mm
7
EMX860ST
BLOCK & LEVEL DIAGRAM
KEC-92359
8
EMX860ST
DISASSEMBLY PROCEDURE
1. MIX Circuit Board

1-1 Remove the six (6) screws marked [30]. The panel
assembly can then be removed. (Fig. 1)
1-2 Remove the sixty-three (63) knobs, the seventeen
(17) hexagonal nuts marked [A] and the seventeen
(17) screws marked [P120]. (Fig. 1)
1-3 Remove the fourteen (14) screws marked [P40]. The
MIX circuit board can then be removed. (Fig. 1)
2. SUB Circuit Board

2-1 Remove the panel assembly. (See Procedure 1.)
2-2 Remove the SUB circuit board from the spacer port
marked [P110]. (Fig. 2)
[P40] [P110]
[30]
[30]
[P40] [P40]
[70] [P110]
[30] [30]
[P120] [A] 17 [P120] [70]
[30]: Bonding B-Tyte Screw 4.0X8 MFZN2BL (VR779900) [70]: Bind Head Screw SP 5.0X10 MFZN2BL (VU688100)
[P40]: Hexagonal Socket Screw-P 3X25 MFZNBL (V3289800)
[P120]: Bonding Tapping Screw-P 3.0X8 MFZN2BL (VN413300) Fig.2
Fig.1
9
EMX860ST
3. PWR 1/3, 2/3, 3/3 Circuit Boards

3-1 Remove the panel assembly. (See Procedure 1.)
3-2 Remove the two (2) connectors from the power
transformer and the six (6) screws marked [50].
The rear assembly can then be removed. (Fig. 3)
3-3 Remove the six (6) screws marked [R150]. The
radiating plate with the PWR 1/3 circuit board can
then be removed. (Fig. 3)
Remove the fourteen (14) screws marked [R80], the
six (6) screws marked [R40] and the TR holder
marked [R60]. The PWR 1/3 circuit board can then
be removed. (Fig. 4)
3-4 Remove the seven (7) hexagonal nuts marked [B]
and the screw marked [R210A].
The PWR 2/3 circuit board can then be removed.
3-5 Remove two (2) screws marked [R210B]. The PWR
3/3 circuit board can then be removed. (Fig. 3)
4. Motor fan
4-1 Remove the panel assembly. (See Procedure 1-1.)
4-2 Remove the rear assembly. (See Procedure 3-2.)
4-3 Remove the PWS 1/3 circuit board. (See Procedure
3-3.)
4-4 Remove the two (2) screws marked [R100]. The
motor fan can then be removed.
5. Power transformer
5-1 Remove the panel assembly. (See Procedure 1-1.)
5-2 Remove the rear assembly. (See Procedure 3-2.)
5-3 Remove the four (4) screws marked [70]. The power
transformer can then be removed. (Fig. 2)
[R100] [50] [R100] [R150]

[R80] [R40] [R80]
[R60]
[R40]
[50] [50]
[R150] [B] [50]
7
[R210A] [R80] [R40] [R80]
[R210B]
[50]: Bonding B-Tyte Screw 4.0X8 MFZN2BL (VR779900) [R40]: Bind Head Screw SP 3.0X8 MFZN2Y (EG330290)
[R100]: Bind Head Screw 3.0X30 ZMC2BL (VT520200) [R80]: Bind Head Tapping Screw-B 3.0X12 MFZN2BL (VQ074600)
[R150]: Bind Head Tapping Screw-B 4.0X8 MFZN2BL (EG340190)
[R210]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300)
Fig.4
Fig.3
10
EMX860ST
LSI PIN DISCRIPTION IC BLOCK DIAGRAM
YSS234 (XN299A00) Digital Sound Processor

NJM2068L-D (XM356A00) BA6137 (XA534A00)
PIN NAME I/O FUNCTION PIN NAME I/O FUNCTION NJM4558L (XM922A00) LED Driver
NO. NO. Dual Operational Amplifier
1 MD4 I/O  33 AVDD - DC A+5Vs bus

2 MD3 I/O  34 VDD - DC D+5V

3 MD0 I/O  External RAM interface data 35 TST0 - DC D+5V

4 MD1 I/O  36 TST1 - DC D+5V + + + + +

5 MD2 I/O  37 DOEN - DC D+5V +
Constant
Current
6 MCKO O Master clock output 38 SDO1 O N.C. Circuit
7 XO O Crystal oscillator connection 39 SDO0 O N.C. 1 2 3 4 5 6 7 8 9

8 XI I Crystal oscillator connection 40 WC O N.C.
D1 D2 D3 D4 GND D5 Amp IN VCC
9 ER0 I  41 BCO O N.C Output

10 ER1 I  Eary refrection preset select 42 MA0 O 
 
11 ER2 I  43 MA1 O 

12 REV0 I  44 MA2 O 
 
13 REV1 I  Effect select 45 MA3 O 
 
14 REV2 I  46 MA4 O  M5229P (XG203A00) TC74HC14AP (IR001400)

15 MUTEN I DC D+5V 47 MA5 O  External RAM interface address
16 ICN I Initial clear 48 MA6 O  7 SEGMENTS GRAPHIC EQUALIZER Hex Inverter

17 PRG I DC D+5V 49 MA7 O 

18 MODE I Preset mode (H=DC +5V) 50 MA12 O 

19 VSS - Ground 51 MA14 O 
20 AVSS - Ground 52 VSS - Ground IN1 1 - + 47k 20 -Vcc 1A 1 14 VDD

10k
21 CVA - N.C. 53 MA10 O  560
 NF1 2 19 GND 1Y 2 13 6A
22 AORL O N.C. 54 MA011 O 
 10k
23 AORR O N.C. 55 MA09 O  External RAM interface address IN2 3 - + 47k 18 +Vcc 2A 3 12 6Y
 560
24 CHL I Sample hold capacitor connection 56 MA8 O 
NF2 4 OUTPUT
2Y 4 11 5A
 17
25 AIL I Lch ADC input 57 MA13 O 
3A 5 10 5Y
26 VDD - DC D+5V 58 VDD - DC D+5V IN3 5 - + 47k 16 INVERTED
560
- + INPUT 3Y 6 9 4A
27 AIR I Rch ADC input 59 WEN I Write enable 47k
NF3 6 15 NON-INVERTED
28 CHR I Sample hold capacitor connection 60 OEN I Output enable INPUT GND 7 8 4Y
29 AOFL O Lch DAC output 61 CEN I Chip select IN4 7 - + 47k 14 NF7
560
30 AOFR O Rch DAC output 62 MD7 I/O  - +
 NF4 8 47k 13 IN7
31 AVDD - DC A+5V 63 MD6 I/O  External RAM interface data

32 CVB I Rch midpoint voltage 64 MD5 I/O  IN5 9 - + 47k 12 NF6
560
- +
NF5 10 47k 11 IN6
TC74HC74AP (IR007400)
Dual D-Type Flip-Flop
1CLR 1 14 VCC
CLR
1D 2 D 13 2CLR
CLR
1CK 3 CK D 12 2D
1PR 4 PR CK 11 2CK
1Q 5 Q PR 10 2PR
1Q 6 Q Q 9 2Q
GND 7 Q 8 2Q
INPUTS OUTPUTS
PR CLR CK D Q Q
L H H L
H L L H
L L H H
H H t H H L
H H t L H L
H H L QO QO
11
EMX860ST
CIRCUIT BOARDS
MIX Circuit Board

CN803: to SUB-CN101
LED installation
LED
LED Spacer
Circuit Board
Component side
Note : See parts list for details of circuit board component parts.
12
EMX860ST
SUB Circuit Board
CN301:
to PWR
-CN101
CN101:
to MIX
-CN803
CN202:
to MIX
-CN802
CN201:
to MIX
-CN801
Component side
3NA-V295250
13
EMX860ST
PWR 1/3 Circuit Board
CN101:
to SUB-CN301
CN102:
to Transformer
Component side
PWR 2/3 Circuit Board PWR 3/3 Circuit Board
CN105:
to AC
Cable
CN106:
to Transformer
CN104 : to PWR 1/3 -W101RE-1

-W101BL-2 Component side
-W101BE-3
-W101WH-4
-W101OR-5 Component side
-W101BR-6 KEC-72360
14
EMX860ST
INSPECTIONS
1. Measuring Instruments
Low Frequency Oscillator: Balance Output, Output Impedance = 150 ohms
Oscilloscope: Input Impedance >= 100 kohms
Level Meter: Input Impedance >= 100 kohms
Note: Use a balance input measuring instrument
2. Mixer Part
2-1 Setting Conditions

Setting conditions are as follows unless otherwise specified.
2-2 Input and Output Load

Input Signal: 1 kHz, sine wave (Rs = 150 ohms)
Load: All output terminals have a 10 k ohms load
2-3 Control Panel Setting

Channel Input (CH1-CH6) Section
EQ (HIGH, MID, LOW) level controls: Center
MONITOR level control: Maximum
EFFECT level control: Maximum
PAN: Center
LEVEL: Maximum
PAD: OFF
Stereo Channel Input (CH7-CH8) Section
EQ (HIGH, MID, LOW) level controls: Center
MONITOR level control: Maximum
EFFECT level control: Maximum
PAN: Center
LEVEL: Maximum
EFFECT Section
DIGITAL EFFECT ON switch OFF
EFFECT OUT level control Maximum
MAIN Section
GRAPHIC EQUALIZER (7 band) Fader: Center
EFFECT RTN level control: Maximum
AUX IN: Maximum
TAPE IN: Maximum
MASTER (MAIN): Maximum
MONITOR Section
GRAPHIC EQUALIZER (7 band) Fader: Center
EFFECT RTN level control: Maximum
MASTER (MAIN) level control: Maximum
Others
PHANTOM +48V switch OFF
POWER AMP switch STEREO
15
EMX860ST
2-4 Gain
Each output gain should be as shown in the table below.
Table 1: INPUT CH 1-CH 6 [Units: dBs]

Input Terminal Input Level MAIN OUT (L, R) MONITOR OUT EFFECT OUT REC OUT (L, R)
Lo-Z -62
-32 +1 +2.5
2.0 +4 ± 2 +10 +2.5
2.0 -16.8 +2.5
2.0
(PAD ON)
+2.5
Hi-Z -52 +1 2.0 - - -
Note: When the POWER AMP MODE switch is set to the BRIDGE side, confirm the gain
Table 2: INPUT CH7-CH8 [Units: dBs]

Input Terminal Input Level MAIN OUT MONITOR OUT EFFECT OUT
MIC -62 +1 +2.5
2.0 +7 ± 2 +13 +2.5
2.0
LINE L -22 +1 +2.5
2.0 +7 ± 2 +13 +2.5
2.0
LINE R -22 +1 +2.5
2.0 +1 ± 2 +7 +2.5
2.0
Table 3: AUX IN and TAPE IN [Units: dBs]

Input Terminal Input Level MAIN OUTPUT
AUX IN -22 +4 ± 2
TAPE IN -22 +1.8 ± 2
2-5 Frequency Response

When the input signal frequency is set to 20 Hz and 20 kHz for the systems shown in Tables 1, 2 and 3, the each
output terminal should fall within the range of +1 and -3 dB at 20 Hz and 20 kHz, using 1 kHz as the reference.
2-6 Equalizer Characteristics

When the input signals shown below are applied to the channel input in the states of 2-3 and the channel EQ (HIGH,MID,
LOW) level controls are changed from center position (flat), the boost/cut range at the MAIN OUT should be as follows:
Table 4 [Units: dB]

EQ Controls GAIN Frequency Response
LOW Maximum 100 Hz +12 ± 2
Minimum +12 ± 2
MID Maximum 2.5 kHz +12 ± 2
Minimum +12 ± 2
HIGH Maximum 10 kHz +12 ± 2
Minimum +12 ± 2
If the result of the equalizer is out of the specified range, change the input signal frequency so that the output
signal is at the set level. Its frequency should then be within the range of 80 - 120% of the standard frequency.
2-7 Graphic Equalizer Characteristics

When the input signals shown below are applied to the channel input in the states of 2-3 and graphic equalizer level controls are
changed from center position (flat), the boost/cut range at the MAIN OUT and the MONITOR OUT should be as follows:
Table 5 [Units: dB]

Input signal frequency and Fader name
125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz
Response Maximum +12 ± 2
Minimum -12 ± 2
If the result of the graphic equalizer is out of the specified range, change the input signal frequency so that the
output signal is at the set level. Its frequency should then be within the range of 80 - 120% of the standard
frequency.
16
EMX860ST
2-8 Meter LED

When the MAIN OUT and MONITOR OUT output levels are as shown in the table below, the corresponding
METER LED lights up.
Table 6 [Units: dBs]

LED Name Lighting Level
+6 +10 ± 2
+3 +7 ± 2
0 +4±2
-5 -1 ± 2
-10 -6 ± 2.5
2-9 Distortion
Set each volume control of the INPUT section and MASTER section to nominal for the systems shown in Tables 1,
2 and 3. When each output except the REC OUT level reaches +14 dBs, the distortion ratio should be less than
0.1 % from 20 Hz to 20 kHz.
2-10 Maximum Output Level

In the states of 2-9, the maximum output levels of MAIN OUT, MONITOR OUT and EFFECT OUT should be
+20 dBs with a distortion of less than 1%.
2-11 Equivalent Input Noise

The measurement CH level volume is assumed to be at maximum, and the other CH level volumes are assumed to be at
minimum in the states of 2-3.
When the Lo-z and MIC input terminals are connected with a 150 ohms resistor, the MAIN OUT terminal noise level
should be less than -61 dBs. If the noise level does not reach -61 dBs due to a gain variance, the converted noise level (=
noise level minus the actual gain of the channel) should be less than -124 dBs. (Apply a DIN-AUDIO filter.)
2-12 Residual Noise

Set all the input level controls at minimum in the states of 2-3. When the MASTER and EFFECT OUT level
controls in the MAIN and MONITOR section are changed to maximum or minimum, the residual noise should be
as shown in the table below. (Apply a DIN-AUDIO filter.)
Table 7 [Unit: dBs]

MASTER VOLUME MAIN OUTPUT MONITOR OUT EFFECT OUT
Maximum -73 -68 -77
Minimum -94 -94 -94
2-13 Phantom Power (+48 V)

Connect a load resistance of 10 K ohm (more than 1W) between pins 1 and 2 of both the Lo-z IN and the MIC IN
input terminals, then short between pins 2 and 3 of the Lo-z IN and the MIC IN input terminal.
When the PHANTOM switch is turned on, +35 ± 3 V should be obtained between the load resistance.
2-14 Digital Effect

When the DIGITAL EFFECT ON switch is turned on, the ON LED lights up. When the DIGITAL EFFECT ON
switch is turn off, the ON LED light goes out.
When the DIGITAL EFFECT ON switch is turned on while inputting a sine wave of -60 dB to the CH1 Lo-z IN
at a minimum MONITOR level control setting, the signal level of the MONITOR OUT will be more than -25 dBs.
Even if the SELECT switch is changed to VOCAL, L HALL and S HALL, confirm that the output level is even.
Confirm that the output soundfrom the vocals musics souce has a digital effect, and confirm that the effect is able
to be turned on and off by the FOOT SW.
2-15 Stability
When a capacitor of 10 FP to 0.1 F is connected in parallel to the loading resistor at each SPEAKER OUT
terminal, or when all VR and EQ control volumes are set to MAX , there should be no abnormality; for example,
there should be no oscillation. Especially, do not oscillate if the FREQ LEVEL is at maximum.
17
EMX860ST
3. Power Amplifier Part

Setting conditions are as follows unless otherwise specified.
Input Terminal: INPUT CH 8 LINE L

POWER AMP switch: STEREO
Measuring Output Terminal: (SPEAKERS) L-A, R-A, MONITOR-A
Output Load: 4 ohm (more than 200 W)
Connect the resistor when inspecting the power amplifier section
INPUT CH 1- CH 7
MONITOR level control: Minimum
EFFECT level control: Minimum
LEVEL level control: Minimum
Note: Other control settings are the same as the mixer part in section 2-3.
3-2 Power ON Muting

The muting relay should be released 2.5 +/- 1 seconds after the power switch is turned on.
3-3 Speaker Terminal DC Voltage

When input terminals are grounded, confirm that each output terminal voltage is 0 +/- 100 mV.
3-4 Gain
When applying a 1 kHz -26.0 dBs sine wave to an INPUT terminal, confirm that the SPEAKERS L+R terminal
output levels are +17.0 +2.5 +2.5
2.0 dBs and the SPEAKERS MONITOR terminal output levels is +23.0 dB 2.0 dBs.
The SPEAKERS L-B, R-B and MONITOR B output terminals should also be measured.

Apply a 20 Hz, 1 kHz and 20 kHz = 26 dB sine wave signal separately to the input; the output level should be
between -3 and +1 dB at 20 Hz and 20 kHz, when 1 kHz is set as the reference. (0 dB)
3-6 Harmonic Distortion

Apply a 1 kHz sine wave signal to the input; the three output levels should be 200 W/4 ohms (31.2 dBs/ch); the
distortion ratio should be less than 0.5 %.
Apply a sine wave signal of 20 Hz, 1 kHz and 20 kHz separately to the input; the three output level should be 100 W
/4 ohms (28.2 dBs/ch); the distortion ratio should be less than 0.5 %.
Do this inspection within 30 seconds.
3-7 Residual Noise

Set the MASTER level controls (MONITOR and MAIN) at minimum; the residual noise should be less than -68 dBs.
Notes: Apply a DIN-AUDIO filter.
3-8 Stability
Apply a 10 kHz -26 dBs rectangular signal to the input and connect a capacitor (10 pF to 0.47 F) parallel to the 4
ohm load resistor, or connect an inductor (10 H to 0.47 H) serial to the 4 ohm load resistor. Confirm that the output
signal is as illustrated below.
Overshoot: Vp/Vo <= 1.8
Ringing: 5 waves and less than 5 waves Vp Vo
Next, only connect a capacitor (10 pF to 0.47µF) to the SPEAKERS terminal as a load, and confirm that the output
is as follows:
Overshoot: Vp/Vo <= 2.5
Ringing: It should end within 7 waves; there is no oscillation.
18
EMX860ST
3-9 Protection
Apply a 10 Hz sine wave signal to the input; increase the input signal so that the output signal is clipped. Confirm
that the protection does not operate and that the speaker relay does not be open.
When applying a 1 Hz, 6 Vp-p (8.7 dBs) sine wave signal to the input, confirm that the protection operates within 2
seconds and that the speaker relay is turned off. When turning off the input signal, confirm that the protection stops
the operation seconds and that the speaker relay automatically turns on within 5 seconds.
3-10 PC Limiter and Limiter

Apply a 1 kHz -20 dBs sine wave signal to the input and then connect a 1 ohm ( +/- 5% 100 W) resistor; confirm that the
output signal is Vp-p <= 20V and that the signal is not rectangular.
3-11 LIMITER Indicator

When applying a 1 kHz -10.8 dBs sine wave signal to the input, the LIMITER indicator should light up.
3-12 Efficiency
When adjusting for the output of L and R to become 10V (+2.2 dBs), confirm that the power consumption is 330 +/- 50W.
4. Main Bridge

Input Terminal: INPUT CH 8 LINE L
POWER AMP switch: BRIDGE
Measuring Output Terminal: SPEAKERS, L + R BRIDGE
Output Load: 8 ohm (more than 400 W)
INPUT CH 1- CH 7
MONITOR level control: Minimum
EFFECT level control: Minimum
LEVEL level control: Minimum
Note: Other control settings are the same as the mixer part in section 2-3.
4-2 Connection
Tip Measuring instruments input
4 ohm
Phone Plug Measuring instruments ground
4 ohm
Sleeve
4-3 Gain
+2.5
Apply a 1 kHz -26.0 dBs sine wave signal to the input; confirm that the output levels are +20.0 dBs 2.0 dB.

Apply a sine wave signal to the input; the output level should be between -3 and +1 dB at 20 Hz and 20 kHz,
when 1 kHz is set as the reference. (0 dB)
5. Power Supply Fluctuation

There should be no operational problems when the power supply fluctuation is within +/- 10% of the nominal
voltage.
19
EMX860ST
20
EMX860ST
21
EMX860ST
22
EMX860ST
23
EMX860ST
24
PARTS LIST
CONTENTS
OVERALL ASSEMBLY ............................................. 2
ELECTRICAL PARTS ............................................ 4
Notes : DESTINATION ABBREVIATIONS

J : Japanese model A : Australian model
U : U.S.A. model E : European model
C : Canadian model D : German model
X : General export model B : British model
M : South African model I : Indonesian model
H : North European model O : Chinese model
V : Generol export model H : Generol export model
(110V) (220V)
WARNING
Components having special characteristics are marked and
must be replaced with parts having specification equal to those
originally installed.
The numbers “QTY” show quantities for each unit.

The parts with “--” in “PART NO.” are not available as spare parts.
This mark “ } ” in the REMARKS column means these parts are interchangeable.
EMX860ST
OVERALL ASSEMBLY
40 R150 R90 R100
R10
R110
R210
R130
R80
R140
R60 R30b
R210
R20
R200
50
R30a R50 R170
R60
R120 R190
R40 R80
R30c
10 B10
B20
B110
B80
B70
B120
B40
60
B90
B100
70
B60
B110
B120
B50
P30
P40
P100
P10
P110
90
P50
30
P150
P60
P130
P70
P140 80
P80
100
P90
P20
P120 P70
20
P60
P90
P120
2
EMX860ST
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK REF NO. PART NO. DESCRIPTION REMARKS QTY RANK
OVERALL ASSEMBLY EMX860ST * R30a NX820610 Circuit Board PWR J J
-- Overall Assembly J J (V290650) * R30a NX820620 Circuit Board PWR U U,V
-- Overall Assembly UV U,V (V290660) * R30a NX820630 Circuit Board PWR H H,W,B,A
-- Overall Assembly HW H,W (V290670) * R30b NX820640 Circuit Board Assembly SP OUT
-- Overall Assembly B B (V290680) * R30c NX820650 Circuit Board Assembly AC J,U,V
-- Overall Assembly A A (V290690) * R30c NX820660 Circuit Board Assembly AC H,W,B,A
* 10 V2953900 Body Assembly R40 EG330290 Bind Head Screw SP 3.0X8 MFZN2Y 6 01
20 -- Panel Assembly (V295300) R50 VV086500 Support H=7.4 B=5.5 6 01
30 VR779900 Bonding B-Tyte Screw 4.0X8 MFZN2BL 6 01 R60 -- Angle (V291510) 2
40 -- Rear Assembly J J (V295310) * R70 V2954800 Insulation Sheet 2
40 -- Rear Assembly U U,V (V295320) R80 VQ074600 Bind Head Tapping Screw-B 3.0X12 MFZN2BL 15 01
40 -- Rear Assembly H H,W (V295330) * R90 V2955500 Fan 3110KL05WB50L34
40 -- Rear Assembly B B (V295340) R100 VT520200 Bind Head Screw 3.0X30 ZMC2BL 2 01
40 -- Rear Assembly A A (V295350) * R110 V2951400 Angle Bracket, Fan
50 VR779900 Bonding B-Tyte Screw 4.0X8 MFZN2BL 6 01 R120 VB659000 Bind Head Screw 3.0X8 MFZN2BL 2 01
* 60 XV025A00 Power Transformer E J * R130 V3277000 AC Cord J VCTF 2X0.75 12A J
* 60 XV026A00 Power Transformer UL CSA U,V R130 VV205600 AC Cord UC SJT 3X#18 10A U,V 06
* 60 XV027A00 Power Transformer CE H,W,B * R130 V3277100 AC Cord E H05VV-F3X0.7510A H,W
* 60 XV028A00 Power Transformer AS A R130 VV058300 AC Cord BS H05VV-F3X0.75 B 08
70 VU688100 Bind Head Screw SP 5.0X10 MFZN2BL 4 01 R130 VV058200 AC Cord E H05VV-F3X0.75 6A A 06
80 VV104600 Cord Holder CV-100 3 01 R140 VV103100 Cord Strain Relief SR-6P1 01
90 V3225000 Ferrite Core HF57T25X12X15 03 R150 EG340190 Bind Head Tapping Screw-B 4.0X8 MFZN2BL 6 01
100 -- Connector Assembly 2426&2426 15P 500L (V297030) R170 VU859000 Power Switch Knob SR200 POWER ON/OFF 01
R190 EG340360 Bind Head Screw 4.0X8 MFZN2BL U,V,H,W,B 01
* V2953900 Body Assembly R200 -- Switch Bracket (V319280)
B10 -- Body (V291470) R210 VN413300 Bonding Tapping Screw-B 3.0X8 MFZN2BL 3 01
B20 -- Carpet C948 (V297020)
B30 -- Shield Sheet (VV43470) 2
B40 -- Side Plate LELT (V291490)
B50 -- Side Plate RIGHT (V291480)
B60 EG340330 Bind Head Screw 4.0X18 MFZN2BL 11 01
B70 VV085400 Handle U 04
B80 VV435200 Oval Head Screw 5.0X35 MFZN2BL 2 01
B90 VV085500 Corner Protector 8 03
B100 03747270 Truss Head Tapping Screw-1 4.0X12 MFZN2BL 16
B110 VV085600 Foot 8 01
B120 03747290 Truss Head Tapping Screw-1 4.0X20 MFZN2BL 8 01
-- Panel Assembly (V295300)

* P10 V2907400 Front Panel
* P20 V2952400 Circuit Board MIX
* P30 V3291600 PCB Support NEW NIFCO 14
* P40 V3289800 Hexagonal Socket Screw-P 3X25 MFZNBL 14
P50 VU860200 Knob MX-GREEN/D-GRAY 1-8ch(HIGH,MID,LOW) 24 01
P60 VU859700 Knob N-GRAY/D-GRAY 1-8ch(MONI),TAPE IN 11 01
MONITOR(MASTER),
MAIN(STEREO)AUX IN
P70 VU860300 Knob MX-BLUE/D-GRAY1-8ch(EFFECT), 11 01
EFFECT(EFFECT OUT),
MONITOR(EFFECT RTN)
P80 VU860400 Knob RED/D-GRAY 1-8ch(PAN) 8 01
P90 VV625800 Knob ORANGE/D-GRAY 1-8ch(LEVEL), 9 01
P90 VV625800 Knob ORANGE/D-GRAY MAIN(STEREO)MASTER
* P100 V2952500 Circuit Board SUB
* P110 V3224800 Spacer Port KCA-14 PIN GOO 6
P120 VN413300 Bonding Tapping Screw-B 3.0X8 MFZN2BL 17 01
P130 -- Connector Assembly 2426&2426 5P 100L (VZ01610)
P140 -- Connector Assembly 2426&2426 10P 100 (V297050)
P150 -- Connector Assembly 2426&2426 15P 120 (V322540)
-- Rear Assembly J J (V295310)

-- Rear Assembly U U,V (V295320)
-- Rear Assembly H H,W (V295330)
-- Rear Assembly B B (V295340)
-- Rear Assembly A A (V295350)
* R10 V2907500 Rear Panel J J
* R10 V2907700 Rear Panel U U,V
* R10 V2907800 Rear Panel H H,W,B
* R10 V2907900 Rear Panel A A
R20 -- Heat Sink (V294800)
: New Parts RANK : Japan only : New Parts RANK : Japan only
3
EMX860ST
ELECTRICAL PARTS
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK REF NO. PART NO. DESCRIPTION REMARKS QTY RANK
ELECTRICAL PARTS EMX860ST -226 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
* V2952400 Circuit Board MIX (XV182C0) * C227 UJ847100 Electrolytic Cap. 10.00 25.0V 01
NX820610 Circuit Board PWR J J (XV183B0) C228 UJ847100 Electrolytic Cap. 10.00 25.0V 01
NX820620 Circuit Board PWR U U,V (XV183B0) C229 VV061800 Mylar Capacitor 0.015 50V J 01
NX820630 Circuit Board PWR H H,W,B,A (XV183B0) C230 VV061400 Mylar Capacitor 0.01 50V J 01
NX820640 Circuit Board Assembly SP OUT (XV183B0) C231 VV061800 Mylar Capacitor 0.015 50V J 01
NX820650 Circuit Board Assembly AC J,U,V (XV183B0) C232 VV061400 Mylar Capacitor 0.01 50V J 01
* NX820660 Circuit Board Assembly AC H,W,B,A (XV183B0) * C233 VV061500 Mylar Capacitor 0.012 50V J 01
* V2952500 Circuit Board SUB (XV184C0) * C234 VV060800 Mylar Capacitor 3900P 50V J 01
C235 VV061500 Mylar Capacitor 0.012 50V J 01
* V2952400 Circuit Board MIX (XV182C0) * C236 VV060800 Mylar Capacitor 3900P 50V J 01
-- Jumper Wire 0.6 (VV29140) 01 C237 VZ352900 Ceramic Capacitor-SL 27P 50V J 01
VU860700 Button CD-GRAY/WHITE VOCAL,L HALL,S HALL,ON 4 01 C238 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
VV307300 LED Spacer SR200 19 01 C239 VZ352900 Ceramic Capacitor-SL 27P 50V J 01
VZ968600 Button CD-GRAY PAD(1to6) 6 01 C240 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C101 UJ867470 Electrolytic Cap. 47.00 50.0V 01 C241 UJ847470 Electrolytic Cap. 47.00 25.0V 01
C103 VV488800 Electrolytic Cap. 10.00 50.0V 01 C243 VZ353900 Ceramic Cap.-B 1000P 50V K 01
-106 VV488800 Electrolytic Cap. 10.00 50.0V 01 C244 VZ353900 Ceramic Cap.-B 1000P 50V K 01
-110 UJ847100 Electrolytic Cap. 10.00 25.0V 01 C246 UJ847100 Electrolytic Cap. 10.00 25.0V 01
C111 VZ353800 Ceramic Cap.-B 470P 50V K 01 C247 VZ353600 Ceramic Cap.-B 220P 50V K 01
-116 VZ353800 Ceramic Cap.-B 470P 50V K 01 C248 VZ353600 Ceramic Cap.-B 220P 50V K 01
C117 VV330700 Electrolytic Cap. 470.00 10.0V 01 C249 VZ353400 Ceramic Capacitor-SL 68P 50V J 01
C119 VZ353800 Ceramic Cap.-B 470P 50V K 01 C251 UJ847470 Electrolytic Cap. 47.00 25.0V 01
C121 VZ353500 Ceramic Capacitor-SL 100P 50V J 01 C253 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01
-126 VZ353500 Ceramic Capacitor-SL 100P 50V J 01 -258 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01
C129 VV061800 Mylar Capacitor 0.015 50V J 01 C303 VV488800 Electrolytic Cap. 10.00 50.0V 01
C130 VV061400 Mylar Capacitor 0.01 50V J 01 -306 VV488800 Electrolytic Cap. 10.00 50.0V 01
C131 VV061800 Mylar Capacitor 0.015 50V J 01 C307 UJ847100 Electrolytic Cap. 10.00 25.0V 01
C132 VV061400 Mylar Capacitor 0.01 50V J 01 -310 UJ847100 Electrolytic Cap. 10.00 25.0V 01
C133 VV061500 Mylar Capacitor 0.012 50V J 01 C311 VZ353800 Ceramic Cap.-B 470P 50V K 01
C134 VV060800 Mylar Capacitor 3900P 50V J 01 -316 VZ353800 Ceramic Cap.-B 470P 50V K 01
C135 VV061500 Mylar Capacitor 0.012 50V J 01 C317 VV330700 Electrolytic Cap. 470.00 10.0V 01
C136 VV060800 Mylar Capacitor 3900P 50V J 01 C318 VV330700 Electrolytic Cap. 470.00 10.0V 01
C137 VZ352900 Ceramic Capacitor-SL 27P 50V J 01 C319 VZ353800 Ceramic Cap.-B 470P 50V K 01
C138 VZ353500 Ceramic Capacitor-SL 100P 50V J 01 C320 VZ353800 Ceramic Cap.-B 470P 50V K 01
C139 VZ352900 Ceramic Capacitor-SL 27P 50V J 01 C321 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C140 VZ353500 Ceramic Capacitor-SL 100P 50V J 01 -326 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C143 VZ353900 Ceramic Cap.-B 1000P 50V K 01 C329 VV061800 Mylar Capacitor 0.015 50V J 01
C145 UJ847100 Electrolytic Cap. 10.00 25.0V 01 C331 VV061800 Mylar Capacitor 0.015 50V J 01
C146 UJ847100 Electrolytic Cap. 10.00 25.0V 01 C332 VV061400 Mylar Capacitor 0.01 50V J 01
C148 VZ353600 Ceramic Cap.-B 220P 50V K 01 C334 VV060800 Mylar Capacitor 3900P 50V J 01
C149 VZ353400 Ceramic Capacitor-SL 68P 50V J 01 C335 VV061500 Mylar Capacitor 0.012 50V J 01
C150 VZ353400 Ceramic Capacitor-SL 68P 50V J 01 C336 VV060800 Mylar Capacitor 3900P 50V J 01
C151 UJ847470 Electrolytic Cap. 47.00 25.0V 01 C337 VZ352900 Ceramic Capacitor-SL 27P 50V J 01
C152 UJ847470 Electrolytic Cap. 47.00 25.0V 01 C338 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C153 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01 C339 VZ352900 Ceramic Capacitor-SL 27P 50V J 01
-158 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01 C340 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C203 VV488800 Electrolytic Cap. 10.00 50.0V 01 C343 VZ353900 Ceramic Cap.-B 1000P 50V K 01
-206 VV488800 Electrolytic Cap. 10.00 50.0V 01 C344 VZ353900 Ceramic Cap.-B 1000P 50V K 01
-210 UJ847100 Electrolytic Cap. 10.00 25.0V 01 C346 UJ847100 Electrolytic Cap. 10.00 25.0V 01
C211 VZ353800 Ceramic Cap.-B 470P 50V K 01 C347 VZ353600 Ceramic Cap.-B 220P 50V K 01
-216 VZ353800 Ceramic Cap.-B 470P 50V K 01 C348 VZ353600 Ceramic Cap.-B 220P 50V K 01
C221 VZ353500 Ceramic Capacitor-SL 100P 50V J 01 C353 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01
: New Parts RANK : Japan only : New Parts RANK : Japan only
4
EMX860ST
REF NO. PART NO. DESCRIPTION REMARKS QTY RANK

-358 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01
C401 UJ867470 Electrolytic Cap. 47.00 50.0V 01
C402 VV488800 Electrolytic Cap. 10.00 50.0V 01
C406 VZ353800 Ceramic Cap.-B 470P 50V K 01
-408 VZ353800 Ceramic Cap.-B 470P 50V K 01
C411 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
-413 VZ353500 Ceramic Capacitor-SL 100P 50V J 01
C427 VV060800 Mylar Capacitor 3900P 50V J 01
C506 VZ354000 Ceramic Capacitor-F 0.01 50V Z 01
: New Parts RANK : Japan only
5
EMX860ST

C601 VV064400 Monolithic Mylar Capacitor 0.82 50V J 03
6
EMX860ST

-722 UJ847100 Electrolytic Cap. 10.00 25.0V 01
* C805 VZ352600 Ceramic Capacitor-SL 6P 50V J
CN801 VV067000 Connector Base Post M2426XX 10P TE 01
EM801 VV056900 Noise Filter ZJSR5101-223TA 01
IC101 XM356A00 IC NJM2068L-D OP AMP 02
IC102 XM922A00 IC NJM4558L  01
 OP AMP
IC102 XQ212A00 IC NJM4558L-D  03
IC103 XM922A00 IC NJM4558L  01
 OP AMP
IC103 XQ212A00 IC NJM4558L-D  03
IC202 XM922A00 IC NJM4558L  01
 OP AMP
IC202 XQ212A00 IC NJM4558L-D  03
7
EMX860ST

IC203 XM922A00 IC NJM4558L  01
 OP AMP
IC203 XQ212A00 IC NJM4558L-D  03
IC302 XM922A00 IC NJM4558L  01
 OP AMP
IC302 XQ212A00 IC NJM4558L-D  03
IC303 XM922A00 IC NJM4558L  01
 OP AMP
IC303 XQ212A00 IC NJM4558L-D  03
IC402 XM922A00 IC NJM4558L  01
 OP AMP
IC402 XQ212A00 IC NJM4558L-D  03
IC403 XM922A00 IC NJM4558L  01
 OP AMP
IC403 XQ212A00 IC NJM4558L-D  03
IC502 XM922A00 IC NJM4558L  OP AMP 01

IC502 XQ212A00 IC NJM4558L-D  03
IC503 XM922A00 IC NJM4558L  01
 OP AMP
IC503 XQ212A00 IC NJM4558L-D  03
IC601 XG203A00 IC M5229P G.EQUALIZER 04
IC603 XA534A00 IC BA6137 LED DRIVER 03
JK101 VU805200 XLM Connector XLR NC3FAV1-0 1ch(Lo-Z) 04
JK103 V2954500 Phone Jack LJ-0695-4R-A 1ch(Hi-Z)
JK401 VU805200 XLM Connector XLR NC3FAV1-0 7ch(MIC) 04
JK402 V2954500 Phone Jack LJ-0695-4R-A 7ch(LINE-L(MONO))
JK403 V2954500 Phone Jack LJ-0695-4R-A 7ch(LINE-R)
JK501 VU805200 XLM Connector XLR NC3FAV1-0 8ch(MIC) 04
JK502 V2954500 Phone Jack LJ-0695-4R-A 8ch(LINE-L(MONO))
JK503 V2954500 Phone Jack LJ-0695-4R-A 8ch(LINE-R)
JK601 V2954500 Phone Jack LJ-0695-4R-A OUTPUT(MAIN(STEREO)-L)
JK602 V2954500 Phone Jack LJ-0695-4R-A OUTPUT(MAIN(STEREO)-R)
JK701 V2954500 Phone Jack LJ-0695-4R-A OUTPUT(MONITOR)
JK702 V2954500 Phone Jack LJ-0695-4R-A EFFECT OUT
JK801 V2954500 Phone Jack LJ-0695-4R-A AUX IN-L(MONO)
JK802 V2954500 Phone Jack LJ-0695-4R-A AUX IN-R
JK803 VZ358700 Pin Jack PIN JK040057DN TAPE IN(L,R),REC OUT(L,R) 02
JK804 V2954500 Phone Jack LJ-0695-4R-A FOOT SW
LD601 VV938100 LED LT331-41-C13 YE MASTER(STEREO) 01
-603 VV938100 LED LT331-41-C13 YE (MASTER-L,+6,+3,0) 01
LD604 VV621000 LED LT321-41-C13 GR MASTER(STEREO) 01
(MASTER-L -5) 01
(MASTER-L -10) 01
LD606 VV938100 LED LT331-41-C13 YE MASTER(STEREO) 01
-608 VV938100 LED LT331-41-C13 YE (MASTER-R,+6,+3,0) 01
(MASTER-R -5) 01
(MASTER-L -10) 01
LD701 VV938100 LED LT331-41-C13 YE MONITOR(MASTER +6,+3,0) 01
-703 VV938100 LED LT331-41-C13 YE 01
LD704 VV621000 LED LT321-41-C13 GR MONITOR(MASTER -5) 01
LD705 VV621000 LED LT321-41-C13 GR MONITOR(MASTER -10) 01
8
EMX860ST

LD801 VV620800 LED LT311G-41-C13 RE POWER AMP(LIMITER) 01
LD802 VV620800 LED LT311G-41-C13 RE MONI(LIMITER) 01
LD803 VV621000 LED LT321-41-C13 GR POWER 01
LD804 VV620800 LED LT311G-41-C13 RE DIGITAL EFFECT(ON) 01
Q101 IC224030 Transistor 2SC2240 GR,BL 01
-104 IC224030 Transistor 2SC2240 GR,BL 01
R101 HF458100 Carbon Resistor 100.0K 1/4 J 01
-104 HF458100 Carbon Resistor 100.0K 1/4 J 01
R105 VV065300 Metal Film Resistor 6.8K 1/4 F 01
R111 VV058400 Flame Proof C. Resistor 390.0 1/4 J 01
R119 HF454100 Carbon Resistor 10.0 1/4 J 01
-122 HF454100 Carbon Resistor 10.0 1/4 J 01
R123 VV066100 Metal Film Resistor 47K 1/4 F 01
-126 VV066100 Metal Film Resistor 47K 1/4 F 01
9
EMX860ST

10
EMX860ST

11
EMX860ST

12
EMX860ST

13
EMX860ST

14
EMX860ST

SW101 VZ587700 Push Switch 2-2 1ch(PAD) 01
* SW601 V3483200 Slide Switch SS001-P022BQB-PA6 POWER AMP
(STEREO-L+R BRIDGE)
SW801 VU804900 Push Switch SPEA31MC16-YL DIGITAL EFFECT 05
(VOCAL,L-HALL,H-HALL) 05
* SW802 V3147300 Push Switch SPEA12MC03-YL DIGITAL EFFECT(ON)
SW803 VV051500 Slide Switch SSSU012NB1-YL PHANTOM +45V(ON/OFF) 02
* VR101 V3161000 Rotary Variable Resistor B 50.0K RK09D113 1ch&2ch(LOW,MID,HIGH)
* -106 V3161000 Rotary Variable Resistor B 50.0K RK09D113
VR107 VU804600 Rotary Variable Resistor A 20.0K RK09K113 1ch(LEVEL) 04
VR109 VZ610800 Rotary Variable Resistor AC 20K RK12L123 1ch(PAN)
VR110 VU804600 Rotary Variable Resistor A 20.0K RK09K113 1ch(EFFECT) 04
VR111 VU804600 Rotary Variable Resistor A 20.0K RK09K113 1ch(MONI) 04
* VR401 VZ611100 Rotary Variable Resistor B 50K RK12L123 7ch(LOW,MID,HIGH)
* -403 VZ611100 Rotary Variable Resistor B 50K RK12L123
VR404 VZ610900 Rotary Variable Resistor A 20K RK12L12C 7ch(LEVEL)
VR406 VZ610900 Rotary Variable Resistor A 20K RK12L12C 7ch(EFFECT)
VR407 VZ610900 Rotary Variable Resistor A 20K RK12L12C 7ch(MONI)
* VR501 VZ611100 Rotary Variable Resistor B 50K RK12L123 8ch(LOW,MID,HIGH)
* -503 VZ611100 Rotary Variable Resistor B 50K RK12L123
VR504 VZ610900 Rotary Variable Resistor A 20K RK12L12C 8ch(LEVEL)
VR506 VZ610900 Rotary Variable Resistor A 20K RK12L12C 8ch(EFFECT)
VR507 VZ610900 Rotary Variable Resistor A 20K RK12L12C 8ch(MONI)
VR601 VU804300 Slide Variable Resistor W 20.0K RS20H12 MAIN(STEREO) 125,250,1K, 03
-607 VU804300 Slide Variable Resistor W 20.0K RS20H12 2K,4K,8K 03
VR608 VZ610900 Rotary Variable Resistor A 20K RK12L12C MAIN(STEREO)(MASTER)
VR701 VV044600 Slide Variable Resistor RS20H11KD017-YL MONITOR 125,250,1K,2K,4K, 03
-707 VV044600 Slide Variable Resistor RS20H11KD017-YL 8K 03
VR708 VU804600 Rotary Variable Resistor A 20.0K RK09K113 MONITOR(MASTER) 04
VR709 VU804600 Rotary Variable Resistor A 20.0K RK09K113 EFFECT OUT 04
VR801 VZ610900 Rotary Variable Resistor A 20K RK12L12C MAIN(AUX IN,TAPE IN,
-804 VZ610900 Rotary Variable Resistor A 20K RK12L12C EFFECT)
MONITOR(EFFECT RTN)
* NX820610 Circuit Board PWR J J (XV183B0)

* NX820620 Circuit Board PWR U U,V (XV183B0)
* NX820630 Circuit Board PWR H H,W,B,A (XV183B0)
15
EMX860ST

* NX820640 Circuit Board Assembly SP OUT (XV183B0)
* NX820650 Circuit Board Assembly AC J,U,V (XV183B0)
* NX820660 Circuit Board Assembly AC H,W,B,A (XV183B0)
* V3225000 Ferrite Core FR25/15/12-D40
VV319600 Fuse Holder CQ-05CT 01
-- Jumper Wire 0.6 (VV29140) 01
C108 VV082200 Mylar Capacitor 3.3 100V M 03
C110 VZ354300 Ceramic Capacitor-E 0.0022 500 M 01
C114 VZ354600 Monolithic Ceramic Cap. 0.10 50V Z 01
* C116 V3280500 Ceramic Capacitor 100P 500V B 01
* C117 V3280500 Ceramic Capacitor 100P 500V B 01
C403 VV082100 Electrolytic Cap. 6800 80V 08
C404 VV082100 Electrolytic Cap. 6800 80V 08
C405 UJ659100 Electrolytic Cap. 1000 35.0V 02
-408 UJ659100 Electrolytic Cap. 1000 35.0V 02
16
EMX860ST

C422 VV314800 Capacitor 1000P 400V J.U.C.S 01
C423 VV520600 Capacitor 0.01 400V J.U.C.S 02
CN102 LB932060 Base Post Connector VH- 6P TE 01
CN104 LB933060 Base Post Connector VH- 6P SE 01
D101 VD631600 Diode 1SS133,176,HSS104 01
-104 VD631600 Diode 1SS133,176,HSS104 01
D105 VG437700 Zener Diode MTZ J 5.6B 5.6V 01
D107 VD631600 Diode 1SS133,176,HSS104 01
D108 VD631600 Diode 1SS133,176,HSS104 01
D109 IF005560 Diode 1SS82TD 01
D111 VV306600 Diode SFT14 26 01
D112 VV306600 Diode SFT14 26 01
D113 VV082000 Diode 2A01 01
-116 VV082000 Diode 2A01 01
D117 VU801600 Diode 1N4004L 26 01
-120 VU801600 Diode 1N4004L 26 01
D121 VZ026700 Diode RL 10Z LFB2 03
D201 VD631600 Diode 1SS133,176,HSS104 01
-204 VD631600 Diode 1SS133,176,HSS104 01
D207 VD631600 Diode 1SS133,176,HSS104 01
D208 VD631600 Diode 1SS133,176,HSS104 01
D211 VV306600 Diode SFT14 26 01
D212 VV306600 Diode SFT14 26 01
D213 VV082000 Diode 2A01 01
-216 VV082000 Diode 2A01 01
D217 VU801600 Diode 1N4004L 26 01
-220 VU801600 Diode 1N4004L 26 01
D301 VD631600 Diode 1SS133,176,HSS104 01
-304 VD631600 Diode 1SS133,176,HSS104 01
D307 VD631600 Diode 1SS133,176,HSS104 01
D308 VD631600 Diode 1SS133,176,HSS104 01
D311 VV306600 Diode SFT14 26 01
D312 VV306600 Diode SFT14 26 01
D313 VV082000 Diode 2A01 01
-316 VV082000 Diode 2A01 01
D317 VU801600 Diode 1N4004L 26 01
-320 VU801600 Diode 1N4004L 26 01
* D401 V2954200 Diode Stack D10XB20 10.0A 200V
D402 VU801600 Diode 1N4004L 26 01
-407 VU801600 Diode 1N4004L 26 01
D409 VU801600 Diode 1N4004L 26 01
D410 VU801600 Diode 1N4004L 26 01
17
EMX860ST

D412 VV335500 Zener Diode MTZ J 43 43.0V 01
-414 VV335500 Zener Diode MTZ J 43 43.0V 01
D416 VU801600 Diode 1N4004L 26 01
D417 VU801600 Diode 1N4004L 26 01
E101 VV075700 Terminal Plate 01
F101 KB001380 Fuse 15.00A U J 04
F101 KB001540 Fuse 12.00A UL U,V 04
F101 KB003360 Fuse 6.30A S H,W,B,A 02
F102 VV070600 Fuse TDS 2A 250V J/U/C J,U,V 01
F102 VV071500 Fuse TSD 2A 250V SEMKO H,W,B,A 01
F103 VV070600 Fuse TDS 2A 250V J/U/C J,U,V 01
F103 VV071500 Fuse TSD 2A 250V SEMKO H,W,B,A 01
IC101 XD853A00 IC NJM7815FA REGULATOR +15V 03
IC102 XD854A00 IC NJM7915FA REGULATOR -15V 03
IC103 XJ607A00 IC NJM7805FA REGULATOR +5V 02
JK101 VV089300 Phone Jack H30280072N SPEAKERS(L-B,A/L+R,BRIDGE 01
-107 VV089300 Phone Jack H30280072N R-A,B/MONITOR A,B) 01
L101 V0030700 Coil LHL16NB680K 04
-104 V0030700 Coil LHL16NB680K 04
L105 VR150900 Coil RZ-001 21MM 02
L106 GE300670 Ferrite Bead BL02RN2-R62T4 02
L201 V0030700 Coil LHL16NB680K 04
-204 V0030700 Coil LHL16NB680K 04
L205 VR150900 Coil RZ-001 21MM 02
L301 V0030700 Coil LHL16NB680K 04
-304 V0030700 Coil LHL16NB680K 04
L305 VR150900 Coil RZ-001 21MM 02
PR101 VL964800 Positive Thermistor PTH9M04BH222TS2 04
PR102 VL965100 Positive Thermistor PTH9M04BE222TS2 04
Q101 VE198700 Transistor 2SA1145 O,Y 01
Q102 VE198800 Transistor 2SC2705 O,Y 01
Q103 V2797700 Transistor 2SC5395 E,F 01
Q104 V2797600 Transistor 2SA1993 E,F 01
* Q107N V2954300 Pair Transistor B1647/D2560 
 Set
* Q108P Pair Transistor B1647/D2560 
 Set
Q111 VP872600 Transistor 2SA1708 S,T 01
Q112 VP872700 Transistor 2SC4488 S,T 01
 Set
 Set
 Set
* Q213N V2954300 Pair Transistor B1647/D2560
* Q214P Pair Transistor B1647/D2560
18
EMX860ST


* Q308P Pair Transistor B1647/D2560  Set
* Q309N V 2 9 5 4 3 0 0 Pair Transistor B1647/D2560 
 Set
* Q313N V 2 9 5 4 3 0 0 Pair Transistor B1647/D2560 
 Set
Q401 V 2 7 9 7 7 0 0 Transistor 2SC5395 E,F 01
Q402 VS883400 Transistor 2SD2394 E,F 02
Q403 VS883400 Transistor 2SD2394 E,F 02
Q405 V 2 7 9 7 6 0 0 Transistor 2SA1993 E,F 01
-408 V 2 7 9 7 7 0 0 Transistor 2SC5395 E,F 01
R111 VZ009300 Flame Proof C. Resistor 330.0 1/4 J 01
-116 VV313800 Flame Proof C. Resistor 220.0 1/4 J 01
R117 VR412900 Metal Film Resistor 0.10 3W J 01
R125 VV276800 Flame Proof C. Resistor 100 1/4 J 01
19
EMX860ST

RY101 VV315400 Relay DC OSA-SH-224DM3M 06
RY102 VV315400 Relay DC OSA-SH-224DM3M 06
SW101 VY898100 Push Switch SDDFA3107U-YL UCS POWER ON/OFF 05
* W101 V2970100 Connector Assembly B&C #18
* V2952500 Circuit Board SUB (XV184C0)

-- Jumper Wire 0.6 (VV29140) 01
20
EMX860ST

C144 VY946300 Electrolytic Cap. 100.0 35.0V 01
-206 VZ353600 Ceramic Cap.-B 220P 50V K 01
-215 UJ847470 Electrolytic Cap. 47.00 25.0V 01
C312 FU450500 Mica Capacitor 5P 500V D 01
C313 FU451820 Mica Capacitor 82P 500V J 01
21
EMX860ST

D101 VD631600 Diode 1SS133,176,HSS104 01
-105 VD631600 Diode 1SS133,176,HSS104 01
D301 VD631600 Diode 1SS133,176,HSS104 01
-318 VD631600 Diode 1SS133,176,HSS104 01
EM101 VV056900 Noise Filter ZJSR5101-223TA 01
-104 VV056900 Noise Filter ZJSR5101-223TA 01
IC101 XN299A00 IC YSS234(SP3) SP3 11
IC102 XU783A00 IC W24258-70LL SRAM 256K 05
IC103 IR007400 IC TC74HC74AP DFF 04
IC104 IR001400 IC TC74HC14AP INVERTER 02
IC105 XM922A00 IC NJM4558L  OP AMP 01

IC105 XQ212A00 IC NJM4558L-D  03
IC106 XM922A00 IC NJM4558L  01
 OP AMP
IC106 XQ212A00 IC NJM4558L-D  03
IC107 XN796A00 IC NJM2082L OP AMP 02
IC108 XM922A00 IC NJM4558L OP AMP 01
-110 XM922A00 IC NJM4558L OP AMP 01
IC108 XQ212A00 IC NJM4558L-D OP AMP 03
-110 XQ212A00 IC NJM4558L-D OP AMP 03
IC111 XJ607A00 IC NJM7805FA REGULATOR +5V 02
IC301 XM922A00 IC NJM4558L  01

-303 XM922A00 IC NJM4558L  01
 OP AMP
IC301 XQ212A00 IC NJM4558L-D  03

-303 XQ212A00 IC NJM4558L-D  03
Q101 VD678700 Digital Transistor DTC114ES 01
Q102 IA101590 Transistor 2SA1015 O,Y 01
Q301 VD678500 Digital Transistor DTA114ES 01
* Q305 IC1815M0 Transistor 2SC1815 Y,GR 01
Q306 IC1815M0 Transistor 2SC1815 Y,GR 01
Q309 IA097030 Transistor 2SA970 GR,BL 01
-311 IA097030 Transistor 2SA970 GR,BL 01
* Q342 VD678700 Digital Transistor DTC114ES 01
22
EMX860ST

R303 VZ009900 Metal Film Resistor 15K 1/4 F 01
R311 VV312800 Metal Film Resistor 680.0 1/4 F 01
23
EMX860ST

X101 QU007700 Ceramic Resonator 12M CSA12.0MTZ 03
* XV025A00 Power Transformer E J

24
EMX860ST

* XV026A00 Power Transformer UL CSA U,V
* XV027A00 Power Transformer CE H,W,B
* XV028A00 Power Transformer AS A
* V2955500 Fan 3110KL05WB50L34

* V3277000 AC Cord J VCTF 2X0.75 12A J
VV205600 AC Cord UC SJT 3X#18 10A U,V 06
* V3277100 AC Cord E H05VV-F3X0.7510A H,W
VV058300 AC Cord BS H05VV-F3X0.75 B 08
VV058200 AC Cord E H05VV-F3X0.75 6A A 06
25
A B C D E F G H I J K
1 EMX860ST CIRCUIT DIAGRAM1/2(MIX) EMX860ST 1
OPAMP
NJM4580L 130K to SUB-CN101
2 2
OPAMP OPAMP
130K
OPAMP
OPAMP
NJM4580L
OPAMP OPAMP
3 3
OPAMP
NJM4580L
10K
R820
R821
12K
12K
100K
100K
10K
OPAMP OPAMP
G.EQUALIZER
to SUB-CN201
4 4
OPAMP
NJM4580L
to SUB-CN202
OPAMP OPAMP
4.3K
OPAMP
LED DRIVER
OPAMP
5 G.EQUALIZER 5
4.3K
NJM4580L
OPAMP
OPAMP OPAMP
OPAMP
OPAMP
NJM4580L
OPAMP
LED DRIVER
6 6
G.EQUALIZER
OPAMP
OPAMP
OPAMP
NJM4580L
NJM4580L
NJM4580L
OPAMP
7 7
KEC-92361-2 2
LED DRIVER
KEC-92361-4 3
8 8
NJM4580L
OPAMP
OPAMP
OPAMP
OPAMP
9 9
27K
27K
OPAMP
OPAMP
OPAMP
10 10
NJM4580L
OPAMP
OPAMP
OPAMP
OPAMP
27K
27K
11 11
OPAMP
OPAMP
OPAMP
NJM4580L
12 12
KEC-92361-3 3
Mylar Capacitor
Ceramic Capacitor
13 WARNING 13
Flame Proof C. Resistor
Components having special characteristics are marked and must be replaced
Metal Film Resistor with parts having specification equal to those originally installed.
14 NOTE : See parts list for details of circuit board component parts.
14
EMX860ST EMX860ST
15 15
1 EMX860ST CIRCUIT DIAGRAM2/2(SUB,PWR) EMX860ST 1
SUB
REGULATOR +5V
R384 R385
to MIX-CN803 SRAM256K
2 OPAMP 330 330
2
INVERTER
OPAMP
INVERTER
D-F/F
1000P
INVERTER
3 OPAMP OPAMP
3
OPAMP
OPAMP
100
10K
R386 R387
330 330
OPAMP OPAMP 100
OPAMP OPAMP 10K
4 INVERTER
4
KEC-92362-2
D-F/F
OPAMP
to MIX-CN802
5 5
R388 R389
OPAMP 330 330
OPAMP
6 6
to MIX-CN801
OPAMP
OPAMP
OPAMP OPAMP OPAMP
OPAMP
7 KEC-92362-3 7
KEC-92362-4
8 8
PWR
1/3
9 9
10 10
REGULATOR +15V RE
BL
RE
OR
WH
OR AC51.0V
to SUB-CN301
11 REGULATOR -15V
11
AC19.4V
to FAN
REGULATOR +5V
1 2 3
C317
C217 C117
100P 100P
100P
12 12
KEC-92360
Mylar Capacitor
13 Ceramic Capacitor 13
NJM7815FA (XD853A00) NJM7915FA (XD854A00) 1N4004L(VU801600) MTZ J 43 43V (VV335500)
Flame Proof C. Resistor REGULATOR +15V REGULATOR -15V DIODE MTZ J 8.2B 8.2V (VG438900)
Metal Film Resistor NJM7805FA (FX607A00) MTZ J 27.OD 27.0 (VG443100)
REGULATOR +5V ZENER DIODE
Mica Capacitor
Monolithic Ceramic Cap. Anode
1
1 1
2 2
3 3
Cathode
1: INPUT 1: GND 2
2: GND 2: INPUT 1: ANODE
3: OUTPUT 3: OUTPUT 2: CATHODE
14 14
EMX860ST EMX860ST
15 15

Service Manual: 19990220-99800 Hamamatsu, Japan

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Service Manual: 19990220-99800 Hamamatsu, Japan

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: 19990220-99800 Hamamatsu, Japan

Uploaded by

Copyright:

Available Formats

SERVICE MANUAL

PA 011457 HAMAMATSU, JAPAN

IMPOR TANT NOTICE

LITHIUM BA TTER Y HANDLING

WARNING: CHEMICAL CONTENT NOTICE!

General specifications Input specifications

1 1 Equalizer controls (HIGH, MID, LOW)

DIGITAL EFFECT section

7 Effect select switch

9 EFFECT OUT control

POWER AMP section POWER indicator & PHANTOM switch

CIRCUIT BOARD LAYOUT

L LINE R L LINE R EFFECT

POWERED MIXER SUB

INPUT TO MAIN TAPE REC OUTPUT

1 Channel input jacks (Hi-Z, Lo-Z) 1-6

SPEAKERS POWER 1/3

1 SPEAKERS MONITOR jacks

BLOCK & LEVEL DIAGRAM

1. MIX Circuit Board

2. SUB Circuit Board

[P120] [A] 17 [P120] [70]

3. PWR 1/3, 2/3, 3/3 Circuit Boards

[R100] [50] [R100] [R150]

LSI PIN DISCRIPTION IC BLOCK DIAGRAM

YSS234 (XN299A00) Digital Sound Processor

7 XO O Crystal oscillator connection 39 SDO0 O N.C. 1 2 3 4 5 6 7 8 9

20 AVSS - Ground 52 VSS - Ground IN1 1 - + 47k 20 -Vcc 1A 1 14 VDD

MIX Circuit Board

SUB Circuit Board

PWR 1/3 Circuit Board

PWR 2/3 Circuit Board PWR 3/3 Circuit Board

CN104 : to PWR 1/3 -W101RE-1

Note: Use a balance input measuring instrument

2-1 Setting Conditions

2-2 Input and Output Load

2-3 Control Panel Setting

Table 1: INPUT CH 1-CH 6 [Units: dBs]

Table 2: INPUT CH7-CH8 [Units: dBs]

Table 3: AUX IN and TAPE IN [Units: dBs]

2-5 Frequency Response

2-6 Equalizer Characteristics

Table 4 [Units: dB]

2-7 Graphic Equalizer Characteristics

Table 5 [Units: dB]

2-8 Meter LED

Table 6 [Units: dBs]

2-10 Maximum Output Level

2-11 Equivalent Input Noise

2-12 Residual Noise

Table 7 [Unit: dBs]

2-13 Phantom Power (+48 V)

2-14 Digital Effect

3. Power Amplifier Part

3-1 Setting Conditions

Input Terminal: INPUT CH 8 LINE L

3-2 Power ON Muting

3-3 Speaker Terminal DC Voltage