L. 9-Gas Chromatography

1
Gas Chromatography
FST-401
DR. IMRAN PASHA
ASSOCIATE PROFESSOR
NATIONAL INSTITUTE OF FOOD SCIENCE &
TECHNOLOGY,
UAF
Gas Chromatography (GC) 2
 Gas Chromatography (GC) is a chromatographic technique in which the mobile phase

is a gas
 GC is currently one of the most popular methods for separating and analyzing
compounds due to its high resolution, low limits of detection, speed, accuracy and
reproducibility
 GC can be applied to the separation of any compound that is either naturally volatile
(i.e., readily goes into the gas phase) or can be converted to a volatile derivative
 This makes GC useful in the separation of a number of small organic and inorganic
compounds
A simple GC system consists
1. Gas source (with pressure 4
and flow regulators)
2. Injector or sample
application system
3. Chromatographic column
(with oven for temperature
control)
4. Detector & computer or
recorder
Carrier gas: He (common), N2, H2

Pinlet 10-50 psig
Flow = 25-150 mL/min packed column
Flow = 1-25 mL/min open tubular column
Column: 2-50 m coiled stainless steel/glass/Teflon
Oven: 0-400 °C ~ average boiling point of sample
Accurate to <1 °C
Detectors: FID, TCD, ECD, (MS)
5
Mobile Phase 6
 GC separates solutes based on their different interactions with the mobile and stationary
phases
 Solute’s retention is determined mostly by its vapor pressure and volatility
 Solute’s retention is controlled by its interaction with the stationary phase
 Gas mobile phase has much lower density so there are
 Decreased chance for interacting with solute
 Increased chance that solid or liquid stationary phase interacts with solute
 Main purpose of the gas in GC is to move the solutes along the column, mobile phase is
often referred to as carrier gas (include He, Ar, H2, N2)
7
1) Gas-solid chromatography (GSC)
 Same material is used as both the stationary phase and support material
 Common adsorbents include:
Alumina, molecular sieves (crystalline aluminosilicates [zeolites] and clay), silica
and active carbon
Advantages Disadvantage
 Very strong retention of low
 Long column lifetimes
 Ability to retain and separate

volatility or polar solutes
 Catalytic changes can occur on
some compounds not easily
resolved by other GC methods GSC supports
 GSC supports have a range of
chemical and physical

environments
2) Gas-liquid chromatography (GLC)
 Stationary phase is some liquid coated on a solid support 8
 Over 400 liquid stationary phases available for GLC
 Many stationary phases are very similar in terms of their retention properties
 e.g. polymers (polysiloxanes, polyesters, polyethylene glycols), fluorocarbons, molten

salts and liquid crystals
 Based on polarity, of the 400 phases available only 6-12 are needed for most separation
Name Chemical nature of polysiloxane Max. temp.

SE-30 Dimethyl 350
Dexsil300 Carborane-dimethyl 450
OV-17 50% Phenyl methyl 375
OV-210 50% Trifluoropropyl 270
OV-225 25% Cyanopropyl-25% phenyl 250
Silar-SCP 50% Cyanopropyl-50% phenyl 275
SP-2340 75% Cyanopropyl 275
OV-275 Dicyanoallyl 250
3) Bonded-Phase Gas chromatography
 Covalently attach stationary phase to the solid support material 9
 Avoids column bleeding in GLC
 Bonded phases are prepared by reacting the desired phase with the surface of a silica-
based support
 Reactions form an Si-O-Si bond between the stationary phase and support or reactions
form an Si-C-C-Si bond between the stationary phase and support

H H
 Commonly recommended bonded-phases
a. Dimethylpolysiloxane HO C C O H
b. Methyl(phenyl)polysiloxane H H n
c. Polyethylene glycol (Carbowax 20M)
CH3 C6H5
d. Trifluoropropylpolysiloxane
e. Cyanopropylpolysiloxane O Si O Si
Advantages CH3
n
C6H5
m
a. More stable than coated liquid phases
b. Can be placed on support with thinner and more uniform thickness than liquid phases
Support Material
There are two main types of supports used in GC: 10
I. Packed columns II. Capillary (open-tubular)

 Large sample capacity columns
 Preparative work  Higher efficiency
 Smaller sample size
 Analytical applications
11
GC Detectors
1) Flame Ionization Detector (FID)

2) Thermal Conductivity Detector (TCD)
3) Nitrogen-Phosphorus Detector (NPD)
4) Electron Capture Detector (ECD)
5) Flame Photometric Detector (FPD)
6) Mass Selective Detector (MSD)
1) Flame Ionization Detector (FID)
12
 Most common type of GC detector
 “universal” detector capable of measuring the presence of almost any organic
Process
 Measures the production of ions when a solute is burned in a flame.
 Ions are collected at an electrode to create a current
Advantages
Universal detector for organics
doesn’t respond to common inorganic

compounds
Mobile phase impurities not detected
 Carrier gases not detected
 Limit of detection: FID is 1000x better than
TCD
 Linear and dynamic range better than TC
Disadvantage
 Destructive detector
2) Thermal Conductivity Detector (TCD) 13
 Katherometer or hot-wire detector
 First universal detector developed for GC
Process
 Measures a bulk property of the mobile phase leaving the column
 Measures ability to conduct heat away from a hot-wire (i.e., thermal conductivity)
 Thermal conductivity changes with presence of other components in the mobile phase
One resistor in contact with

mobile phase leaving column
Another in contact with referenc

stream of pure mobile phase
Thermal Conductivity Detector (TCD)…
14
Advantages
 Truly universal detector
 Applicable to the detection of any compound in GC
 Non-destructive
 Useful for detecting compounds from preparative-scale columns
 Useful in combination with other types of GC detectors
Disadvantage
 Detect mobile phase impurities
 Sensitive to changes in flow-rates
 Limit of detection
-7
 ~ 10 M
 Much higher then other GC detectors

3) Nitrogen-Phosphorus Detector (NPD)
 Used for detecting nitrogen- or phosphorus containing compounds 15
 Also known as alkali flame ionization detector or thermionic detector
Process
 Same basic principal as FID Alkali Bead
 Measures production of ions when a
solute is burned in a flame

 Ions are collected at an electrode to
create a current
 Contains a small amount of alkali
metal vapor in the flame

 Enhances the formation of ions from
nitrogen- and phosphorus- containing

compounds
3) Nitrogen-Phosphorus Detector (NPD)… 17
Advantages
 Useful for environmental testing
Detection of organophosphate pesticides

 Useful for drug analysis
Determination of amine-containing or basic drugs

 Like FID, does not detect common mobile phase impurities or carrier gases
 Limit of detection: NPD is 500x better than FID in detecting nitrogen- and phosphorus-
containing compounds
 NPD more sensitive to other heterocompounds, such as sulfur-, halogen-, and arsenic-
containing molecules
Disadvantage
 Destructive detector
 NPD is less sensitive to organic compounds compared to FID

4.) Electron Capture Detector (ECD)
 Radiation-based detector 18
 Selective for compounds containing electronegative atoms, such as halogens
Process
 Based on the capture of electrons by
 Electronegative atoms in a molecule
 Electrons are produced by ionization of the carrier gas with a radioactive source (3H or
63Ni)
 In absence of solute, steady stream of these electrons is produced

 Electrons go to collector electrode where they produce a current
 Compounds with electronegative atoms
 Capture electrons, reducing current
19
4) Electron Capture Detector (ECD)…
Advantages
 Useful for environmental testing
 Detection of chlorinated pesticides or herbicides
 Detection of polynuclear aromatic carcinogens
 Detection of organometallic compounds
 Selective for halogen- (I, Br, Cl, F), nitro-, and sulfur-containing
compounds
 Detects polynuclear aromatic compounds, anhydrides and
conjugated carbonyl compounds
5) Flame Photometric Detector
Gas chromatography-mass spectrometry
 A common combination is gas chromatography-mass spectrometry (GC-MS)

 In this technique, a gas chromatograph is used to separate different compounds
 This stream of separated compounds is fed online into the ion source, a
metallic filament to which voltage is applied
 This filament emits electrons which ionize the compounds
 The ions can then further fragment, yielding predictable patterns
 Intact ions and fragments pass into the mass spectrometer's analyzer and are
eventually detected
A gas chromatograph (right) directly coupled to a mass spectrometer (left)
Applications of Gas Chromatography
Compounds which can be separated by gas chromatography

 Phenols
 Hydrocarbons
 Amines
 Sulfur compounds
 Amino acid derivatives
 Essential oils
 Fatty acids
 Methyl esters
 Drugs

L. 9-Gas Chromatography

Uploaded by

Copyright:

Available Formats

L. 9-Gas Chromatography

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

L. 9-Gas Chromatography

Uploaded by

Copyright:

Available Formats

1

 Gas Chromatography (GC) is a chromatographic technique in which the mobile phase

Carrier gas: He (common), N2, H2

 Solute’s retention is controlled by its interaction with the stationary phase

 Gas mobile phase has much lower density so there are

 Decreased chance for interacting with solute

 Ability to retain and separate

chemical and physical

 e.g. polymers (polysiloxanes, polyesters, polyethylene glycols), fluorocarbons, molten

Name Chemical nature of polysiloxane Max. temp.

form an Si-C-C-Si bond between the stationary phase and support

I. Packed columns II. Capillary (open-tubular)

1) Flame Ionization Detector (FID)

doesn’t respond to common inorganic

 Carrier gases not detected

 Limit of detection: FID is 1000x better than

One resistor in contact with

Another in contact with referenc

 Applicable to the detection of any compound in GC

 Useful for detecting compounds from preparative-scale columns

 Useful in combination with other types of GC detectors

 Sensitive to changes in flow-rates

 Much higher then other GC detectors

 Measures production of ions when a

solute is burned in a flame

metal vapor in the flame

nitrogen- and phosphorus- containing

Detection of organophosphate pesticides

Determination of amine-containing or basic drugs

 NPD is less sensitive to organic compounds compared to FID

 In absence of solute, steady stream of these electrons is produced

 A common combination is gas chromatography-mass spectrometry (GC-MS)

Compounds which can be separated by gas chromatography

You might also like