4 Toilet Systems
4 Toilet Systems
4 Toilet Systems
04 Toilet Systems
INTRODUCTION
At Jabsco, we are the world’s largest manufacturer and supplier of small craft
marine toilets — so we’ve built a fair degree of experience in heads systems
and their design and installation.
Far and away the most widely used marine toilets are manually operated.
Our 29090/29120 Series have been the most popular type worldwide over
the last 10 years. We have now improved them even further with stronger
materials, new styling and new features that make them even easier to
service and maintain. With modern design and materials, manual toilets
are easy to install and service, simple and clean to use and offer exceptional
value for your money. Remember, there are two bowl sizes to choose from,
and normally even the smallest boats have enough space for the comfort of
a full-sized bowl (29120 Series) for just a little extra cost.
Our luxury range of Lite Flush, Quiet Flush and Deluxe Flush Electric Toilets
feature low noise levels, so sleeping guests will not be disturbed when the
toilet is used. There are options of either flushing with fresh water from the
boat's own supply or with salt, river or lake water from outside the boat.
Lite Flush Toilets have an integral rinse and waste pump system encased
in a stylish housing. Deluxe Flush Series Toilets have domestic-style bowls
with all pump components hidden from view. Quiet Flush Toilets have the
pump at the rear of a narrow base, allowing it to be installed in more narrow
spaces. Three-way controls allow water level to be increased or decreased.
Quiet Flush Conversion Kits allow owners of 37010 and many other types
of electric or manual toilets to upgrade to full Quiet Flush specification. All
our electric toilets use surprisingly little power, and are simple to operate for
newcomers and experienced crews alike.
Manual toilets can be upgraded to electric by the Lite Flush Electric Toilet.
The new Lite Flush has been designed to instantly retrofit your existing
manual toilet with the same footprint, fixing points and hose attachments as
the Jabsco manual toilet.
All our toilets can be used on inland waterways, rivers, lakes or the sea, and
can be installed above or below the waterline. However, attention must
be paid to installation instructions for safety, and installations must meet
with local regulations concerning overboard discharge. All our toilets are
designed to discharge overboard or into holding tanks as necessary.
39
We at Jabsco understand the importance of For this reason, Jabsco has produced this guide
keeping the environment clean and free from which details the four most common ways of
waste. However, it is unfortunate that there is no dealing with toilet waste. It is important to note
internationally accepted legislation to guide us on that your choice of system may be governed by
how to deal with the waste from our toilet systems. your own national and local rules and regulations.
OPTION 1 OPTION 2
Discharge waste through a Y-valve directly into a non-restricted area, or to a Collect waste in an onboard holding tank so that it can be discharged later
holding tank when within the three-mile limit, using the toilet’s own pump when you are in unrestricted waters using an electric or manual pump.
and an anti-siphon loop.
OPTION 3 OPTION 4
Collect waste in an onboard holding tank for discharge later to a shore A combination of Options 2 and 3 to give you the flexibility of discharging
station using a dockside suction pump or portable utility pump. waste wherever most convenient and without risk to the environment.
Introduction
Toilet Systems 04
40
04 Toilet Systems
TWIST ’N’ LOCK MANUAL TOILETS
MODEL DESCRIPTION
29120-3000 Regular bowl size
29090-3000 Compact bowl size
29127-1000 Replacement Regular Seat and Lid
29097-1000 Replacement Compact Seat and Lid
29040-3000 Replacement Pump Assembly
29045-3000 Service Kit
For service and spare parts listing, see page 248.
Toilet Systems 04
LITE FLUSH TOILETS
A new electric toilet designed to instantly retrofit your existing manual toilet FEATURES
or to give your bathroom a modern stylish look. • Lightweight and compact.
The Lite Flush is Jabsco’s new stylish, low power consuming electric toilet, • Stylish and contemporary design.
designed specifically to replace an existing Jabsco manual toilet. The • Slow-close seat and lid.
installation is quick and straight-forward due to the same footprint, fixing
• Integral rinse and waste pump system.
points and hose attachments as the Jabsco manual toilet.
• Low water usage — 1.3 US quarts
The compact and lightweight design with its ceramic bowl and plastic outer (1.2L) per flush.
casing makes it very easy to clean. It is fitted with a new quiet and efficient • Low power consumption.
flush pump which has large clearances to help prevent blockages.
• Compliance with USCG 183.410 and
Lite Flush Toilets are available with either a foot switch (left or right fitting) 8846 Marine Ignition Standard.
or a wall mounted control panel.
NOTE
For use with lake/sea water only.
Lite Flush with Foot Switch Lite Flush with Control Panel
FITTING Connections for 3/4" (19mm) ID inlet hose and FITTING Connections for 3/4" (19mm) ID inlet hose and
1-1/2" (38mm) outlet hose 1-1/2" (38mm) outlet hose
SIZE 15-3/4" wide x 15-3/4" deep x 14-3/4" high SIZE 15-3/4" wide x 15-3/4" deep x 14-3/4" high
(40cm x 40cm x 37cm) (40cm x 40cm x 37cm)
WEIGHT 24lb (11kg) WEIGHT 24lb (11kg)
04 Toilet Systems
ELECTRIC TOILETS & KITS
This design makes installation of electric toilets both affordable and practical. Requires minor
Boatbuilders find it easier to offer the option of electric or manual toilets to repositioning of
their customers. Boat owners appreciate modern design and the safety of a discharge hose.
unit that can be reconverted to manual operation inside fifteen minutes in
the event of a power failure. Boatbuilders and boat owners benefit from a
conversion kit that makes use of existing manual toilet plumbing.
• Complete for 29090/29120 Series, compact and regular bowl, left or right hand
manual toilets.
• Simple rotary control knob offers choice of “Flush and Discharge” or
“Discharge Only.”
• Existing discharge plumbing remains undisturbed for ease of installation.
• Low power consumption, typically less than the equivalent of 1.0 amp/hour each day.
• Vigorous 5 GPM (20 LPM) flush rate for rapid flushing, typically less than 10 seconds. FITTING Connections for 3/4" (19mm) ID inlet hose, and
for existing discharge elbow and outlet hose
• Crevice-free contours for added hygiene.
SIZE 3-1/2" wide x 6" deep x 10-1/2" high (9cm x
• Two powerful, self-priming pumps for above or below waterline installation. 15cm x 27cm)
• Dual role design macerates waste for both overboard discharge and holdings tanks. WEIGHT 7.5lb (3.3kg)
• Automatic inlet water checkvalve for additional security.
• Corrosion-resistant materials throughout for reliable fresh or salt water service. MODEL DESCRIPTION
• Manual pump may be refitted to maintain service in the event of power failure. 29200-0120 Toilet conversion, 12V DC, fuse 25 amp
• Strong, abrasion-resistant plastic moldings for consistent color match and high
29200-0240 Toilet conversion, 24V DC, fuse 15 amp
gloss finish.
29101-0000 Service Kit, Seals and Gaskets
• Retains existing joker valve to maintain automatic back-flow protection.
For service and spare parts listing, see page 249.
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
• Flushing pump self-priming up to 4' (1.2m) vertical lift. 37010-1096 Replacement Regular Seat and Lid
• May be mounted 3' (1m) below the waterline. 29127-1000 Replacement Compact Seat and Lid
• Equally suitable for overboard or holding tank discharge. 29097-1000 Replacement Compact Seat and Lid
• Built-in backflow preventer. 37040-0000 Service Kit, Seals and O-Rings
• For installations fitted with vented loops, use a solenoid valve (see next page). For service and spare parts listing, see page 250.
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
43
Electric Kits
Convert our Manual Toilet Compact and Regular Bowl models to full electric
operation without need to alter existing inlet or discharge seacocks.
• Also converts most toilets with four bolt screw pattern on a 3-3/4" (95mm) diameter FITTING Connections for 5/8" to 3/4" (16mm to 19mm)
bolt circle such as Groco, Raritan, Wilcox Crittenden, Mansfield and Sealand. ID inlet hose, 1" or 1-1/2" (25mm or 38mm) ID
outlet hose
• Push-button flushing for ease and simplicity of operation.
SIZE 13-1/4" long x 8-1/4" wide x 3-1/4" high
• Comprehensive kit has all necessary parts, including flushing pump, macerator (34cm x 21cm x 8cm)
pump, switch, adapters, clamps, hose and fastenings.
WEIGHT 12.5lb (5.7kg)
• Flushing pump self-priming up to 4' (1.2m) vertical lift.
• May be installed 3' (1m) below the waterline.
MODEL DESCRIPTION
• For installations fitted with vented loops, use a solenoid valve on inlet hose
37010-0092 12V DC, fuse 25 amp
(see below).
37010-0097 24V DC, fuse 15 amp
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
37040-0000 Service Kit, Seal and Gaskets
For service and spare parts listing, see page 250.
Where 37010 Series Electric Toilets are installed below the waterline, we
recommend installing a loop on the inlet plumbing rising at least 8" (20cm)
above the highest (static or heeled) waterline level, and installing a vented
loop fitting at the top of the loop to stop water siphon over the loop and
flooding the vessel.
The suction generated by 37010 Series Electric Toilets will open the valve
in vented loops, drawing in air and preventing priming. The 37068-2000
Solenoid Valve attaches directly to Jabsco Vented Loops and is wired to the
toilet’s on/off switch. It closes whenever the toilet pump is operated and MODEL DESCRIPTION
ensures full pump priming.
37068-2000 Solenoid Valve for use with 12V or 24V DC
04 Toilet Systems
QUIET FLUSH ELECTRIC TOILETS
Quiet Flush Toilets are a variation of the well proven and popular 37010
Series Electric Toilet. Designed to radically reduce noise levels, Quiet Flush
Toilets make life onboard more comfortable for all crew members, even
those sleeping!
Two versions are available, either for connection to the vessel’s existing
pressurized water system or supplied with a remote mounted pump to use
salt, river or lake water to flush.
• May be mounted up to 3' (1m) below the waterline with proper plumbing to
prevent flooding. FITTING Connections for 3/4" (19mm) ID inlet hose and
1" (25mm) discharge hose. Adapter included for
• Both models feature a powerful macerator discharge pump that breaks up waste connection to 1-1/2" (38mm) discharge hose.
and evacuates the toilet.
SIZE Regular: 14-1/2" wide x 19-3/4" deep x 14-1/2"
• Both models are supplied complete with 6' (2m) of white hose to neatly connect high (37cm x 50cm x 37cm)
the inlet bowl fitting to either the solenoid valve/siphon breaker assembly or Compact: 13-1/2" wide x 16-1/2" deep x 13-
inlet pump. 3/4" high (35cm x 42cm x 34.5cm)
• Available in regular or compact bowl sizes. WEIGHT 37045 Compact Fresh Water: 34lb (15.4kg)
37245 Compact Salt Water: 38lb (17.2kg)
• Hygienic, pure white vitreous china bowl for ease of cleaning.
37045 Regular Fresh Water: 38lb (17.36kg)
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). 37045 Regular Salt Water: 42lb (19.1kg)
MODEL DESCRIPTION
1 2 3 37045-0092 Compact size, 12V DC, fuse 25 amp, fresh water
37045-0094 Compact size, 24V DC, fuse 15 amp, fresh water
37045-1092 Regular size, 12V DC, fuse 25 amp, fresh water
37045-1094 Regular size, 24V DC, fuse 15 amp, fresh water
37245-0092 Compact size, 12V DC, fuse 25 amp, salt water
37245-0094 Compact size, 24V DC, fuse 15 amp, salt water
1. Three-way control panel allows the operator to select a normal flush and drain
cycle, or to lower or raise the water level. 37245-1092 Regular size, 12V DC, fuse 25 amp, salt water
2. 37245 Series are supplied with a remote mounted, quiet-running flush pump to 37245-1094 Regular size, 24V DC, fuse 15 amp, salt water
bring in sea, river or lake water for flushing. Complete with Pumpgard™ strainer. 29127-1000 Replacement Regular Seat and Lid
3. 37045 Series are supplied with a solenoid valve and siphon breaker assembly
29097-1000 Replacement Compact Seat and Lid
for connection to any existing pressurized water pump with a flow rate of 3.5
GPM (13.5 LPM) or more. The siphon breaker prevents backflow from the toilet 90197-0000 Service Kit, Seal and O-Rings for head
macerator
to the water system.
For service and spare parts listing, see page 251.
45
MODEL DESCRIPTION
37055-0092 12V DC, fuse 25 amp, fresh water
37055-0094 24V DC, fuse 15 amp, fresh water
37255-0092 12V DC, fuse 25 amp, salt water
Build your own Quiet Flush Toilet using existing Jabsco 37010 Series Toilets 37255-0094 24V DC, fuse 15 amp, salt water
or any manual or electric toilet bowl with bolt fixing on a 3-3/4" (95mm)
diameter circle, to upgrade to Quiet Flush operation. The same options are 90197-0000 Service Kit, Seal and Gaskets
available as the complete toilet for fresh or salt water flush. For service and spare parts listing, see page 251.
• Comprehensive kit has all necessary components, except bowl, seat and lid.
• Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
04 Toilet Systems
DELUXE FLUSH ELECTRIC TOILETS
The Deluxe Flush range is Jabsco’s newest offering to the top of the range
electric toilet market. This range is now complete with the new 14" and
existing 17" electric toilets.
The stylish and extremely compact design is carefully contoured to conceal
the flush pump, wiring and plumbing, while still featuring a full-size
household seat.
Both 14" and 17" electric toilets are offered in a choice of a slant back or a
straight back. The slant back version gives a minimal footprint and makes
it easy to mount against a sloping surface or in a corner. The straight back
version allows snug fitting against a vertical bulkhead.
The toilets feature a new multifunctional “one touch” control pad which
adapts to standard Gewiss and Vimar switch fascias.
Deluxe Flush 14" Straight Back FITTING Connections for 3/4" (19mm) ID inlet hose and
1-1/2" (38mm) outlet hose
Electric Toilets SIZE 14-1/2" wide x 17-5/8" deep x 14-3/8" high
(37cm x 45cm x 36cm)
WEIGHT 58080 Series: 55lb (25kg)
58280 Series: 60lb (27kg)
MODEL DESCRIPTION
58080-1012 14" straight back bowl with solenoid valve,
12V DC, fuse 25 amp
58080-1024 14" straight back bowl with solenoid valve,
24V DC, fuse 15 amp
58280-1012 14" straight back bowl with intake pump,
12V DC, fuse 25 amp
Straight Back 58280-1024 14" straight back bowl with intake pump,
24V DC, fuse 15 amp
47
Deluxe Flush 14" Slant Back FITTING Connections for 3/4" (19mm) ID inlet hose and
1-1/2" (38mm) outlet hose
Electric Toilets SIZE 14-1/2" wide x 17-5/8" deep x 14-3/8" high
(37cm x 45cm x 36cm)
WEIGHT 58060 Series: 53lb (24kg)
58260 Series: 57lb (26kg)
MODEL DESCRIPTION
58060-1012 14" slanted back bowl with solenoid valve,
12V DC, fuse 25 amp
58060-1024 14" slanted back bowl with solenoid valve,
24V DC, fuse 15 amp
Slant Back 58260-1012 14" slanted back bowl with intake pump,
12V DC, fuse 25 amp
58260-1024 14" slanted back bowl with intake pump,
24V DC, fuse 15 amp
Deluxe Flush 17" Straight Back FITTING Connections for 3/4" (19mm) ID inlet hose and
1-1/2" (38mm) outlet hose
Electric Toilets SIZE 14-1/2" wide x 17-1/2" deep x 17-1/4" high
(37cm x 44.5cm x 44cm)
WEIGHT 58040 Series: 69lb (31kg)
58240 Series: 64lb (29kg)
MODEL DESCRIPTION
58040-1012 17" straight back bowl with solenoid valve,
12V DC, fuse 25 amp
58040-1024 17" straight back bowl with solenoid valve,
24V DC, fuse 15 amp
58240-1012 17" straight back bowl with intake pump,
12V DC, fuse 25 amp
Straight Back
58240-1024 17" straight back bowl with intake pump,
24V DC, fuse 15 amp
Deluxe Flush 17" Slant Back FITTING Connections for 3/4" (19mm) ID inlet hose and
1-1/2" (38mm) outlet hose
Electric Toilets SIZE 14-1/2" wide x 17-1/2" deep x 17-1/4" high
(37cm x 44.5cm x 44cm)
WEIGHT 58020 Series: 62lb (28kg)
58220 Series: 67lb (30kg)
MODEL DESCRIPTION
58020-1012 17" slanted back bowl with solenoid valve,
12V DC, fuse 25 amp
58020-1024 17" slanted back bowl with solenoid valve,
24V DC, fuse 15 amp
58220-1012 17" slanted back bowl with intake pump,
Slant Back 12V DC, fuse 25 amp
58220-1024 17" slanted back bowl with intake pump,
24V DC, fuse 15 amp
04 Toilet Systems
ACCESSORIES
A non-return valve can be used to help prevent waste A check valve gives quicker and easier
backflow on electric toilets. Simply fit discharge hose flushing response on many manual and
close to the toilet. 37010 Series Electric Toilet installations.
• For use with manual and electric toilets using
sea water flush.
• Simply fit inlet suction hose near seacock, but just above waterline.
• Prevents loss of prime in above-waterline installations.
• Retains water in bowl of 37010 Series Electric Toilets installed above waterline.
58109-1000 1-1/2" (38mm) Outlet Non-Return Joker Valve SIZE 4-1/4" long x 2-1/8" wide x 2" high (10.8cm x
5.5cm x 5cm)
WEIGHT 0.25lb (0.1kg)
FITTING Connections for two 1-1/2" (38mm) ports and • Available in three sizes for 1-1/2" (38mm),
1" (25mm) inlet port 1" (25mm) and 3/4" (19mm) ID hose.
SIZE 7-5/8" long x 7-1/4" wide x 4-5/8" high (20cm x • Internal valve avoids need for external venting.
19cm x 12cm) • Molded in tough, corrosion-proof plastic.
WEIGHT 2lb (0.9kg) FITTING Connections for 3/4" (19mm), 1" (25mm) and
1-1/2" (38mm) ID hose
MODEL DESCRIPTION SIZE 3/4" (19mm) Model: 3" high x 3-3/4" wide x
1" deep (7.5cm x 9.5cm x 2.5cm)
45490-1000 Y-Valve
1" (25mm) Model: 5" high x 7-1/2" wide x
45500-1000 Handle Extension Kit 1-3/4" deep (12.5cm x 19cm x 4.5cm)
1-1/2" (38mm) Model: 5" high x 7-1/4" wide x
45493-0000 Replacement Handle 2" deep (12.5cm x 18.5cm x 5cm)
18753-0661 Replacement Ports Kit WEIGHT 3/4" (19mm) Model: 1.5oz (0.04kg)
45488-0000 Service Kit 1" (25mm) Model: 0.25lb (0.13kg)
1-1/2" (38mm) Model: 0.5lb (0.2kg)
MODEL DESCRIPTION
29015-0000 3/4" (19mm) model
29015-0020 1" (25mm) model
29015-0010 1-1/2" (38mm) model
29015-1000 Replacement valve. Only available in Europe.
49
MODEL DESCRIPTION
18590-2092 12V DC pump, marine model
Toilet Pumpgard™
18590-2094 24V DC pump, marine model
17288-1000 Replacement Bolt Kit
The Pumpgard™ protects manual or electric
18598-1000 Service Kit
toilets from pump malfunctions caused by debris.
For service and spare parts listing, see page 256.
• Simply installed in 3/4" (19mm) ID inlet hose.
• Transparent housing allows instant inspection.
• Screw-off top allows quick in-place cleaning and *Products marked do not comply with European legislation.
removal of debris.
FITTING Connections for 3/4" (19mm) ID hose
SIZE 4-3/4" long x 2-3/4" wide x 2-1/2" high (12cm x
7cm x 6cm)
WARNING
MODEL DESCRIPTION Explosion Hazard.
46400-0000 Toilet Pumpgard™ Pumps with AC motors can spark. Explosion and death can occur.
Do not use where flammable vapors are present.
18753-0040 Replacement 40# Mesh Filter
Accessories
Toilet Systems 04
50
04 Toilet Systems
NEW CERAMIC DESIGNS
We have redesigned our ceramic range to offer our customers even more All compact and large bowl manual and electric toilets will change to the
luxury on board their boat. new design. We will also update the 17" Vertical Deluxe Flush, followed by
the 14" Vertical Deluxe Flush. Both the 17" and 14" Angled Deluxe Flush
In 2016, we launch our new ceramic designs which will directly replace all
will remain as they are.
existing models; the new designs will be fully compatible with existing
pump systems found on our manual and electric toilet models.
PLEASE CONTACT YOUR LOCAL DISTRIBUTOR
The updated models are styled to meet both the functional and aesthetic FOR MORE INFORMATION.
demands of today’s boat designers and boat owners alike. New for the 2016
models are Soft Close Seat and Lid options; these are available on a variety
of models within our extensive range (see our part number cross reference
table on the next page for details).
In 2016, our Jabsco toilets will be updated. We are changing the ceramic bowl, which will mean new part numbers for all models. All large bowl toilets will
have a Soft Close Seat option as well as the standard wooden seat. See the table below for replacement part numbers and new Soft Close numbers.