Title : Piping and Valves Doc. No.

L-001 Annex: B Class BS20

Project : NORSOK Company : Rev.Date : 20.09.99 Rev. : 3

Max Design Pressure at Temperature Rating CL 300

Pressure (Barg) 49.6 49.6 48.1 46.9 Branch Table NBR3
Temperature (Deg. C) -101 38 50 60 Service Code N-S200

Design Code ASME B31.3

Corr. Allow. 0.0
Wall Thickness Under Tolerance 12.5%, SEE NOTE 2
Longitudinal Weld Efficiency <= 4"= 0.8, > 4"= 1

ND (inch) 0.50 0.75 1.00 1.50 2.00 3.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 24.00 30.00 36.00
OD (mm) 21.3 26.7 33.4 48.3 60.3 88.9 114.3 168.3 219.1 273.1 323.8 355.6 406.4 457.0 508.0 610.0 762.0 914.0
THK (mm) 2.77 2.87 3.38 3.68 2.77 3.05 3.05 7.11 6.35 6.35 8.38 7.92 9.53 9.53 12.70 12.70 15.88 19.05
SCH 40S 40S 40S 40S 10S 10S 10S 40S 20 20 30 20 30 30 30 40
WEIGHT STD STD XS XS

END
RANGE GEOMETRIC EDS/
ITEM TYPE CONN MATERIAL DESCR. MDS RATING SCHD. NOTES
FROM TO STANDARD VDS
#1 #2
PIPE 0.50 4.00 ASME B36.19M PE PE A312 TP316 S01
PIPE 6.00 6.00 ASME B36.19M PE PE A312 TP316 SMLS S01
PIPE 6.00 6.00 ASME B36.19M PE PE A358 316 CL1,3 OR 4 S01
PIPE 8.00 36.00 ASME B36.10M PE PE A358 316 CL1,3 OR 4 S01
PIPE NIPPLE 100MM LONG 0.50 1.00 ASME B36.19M TE PE A312 TP316 SMLS S01 80S
BENDING 0.50 36.00 MADE FROM PIPE NBE1
CAP 0.50 36.00 ASME B16.9 BE A403 WP 316 S/WX S01
CONCENTRIC REDUCER 0.75 36.00 ASME B16.9 BE BE A403 WP 316 S/WX
CONCENTRIC REDUCER 1.00 4.00 ASME B16.9 BE BE A403 WP 316W
ECCENTRIC REDUCER 0.75 36.00 ASME B16.9 BE BE A403 WP 316 S/WX S01
ECCENTRIC REDUCER 1.00 4.00 ASME B16.9 BE BE A403 WP 316W S01
ELBOW LONG RADIUS 45 DEG 0.50 36.00 ASME B16.9 BE BE A403 WP 316 S/WX S01
ELBOW LONG RADIUS 45 DEG 1.00 4.00 ASME B16.9 BE BE A403 WP 316W S01
ELBOW LONG RADIUS 90 DEG 0.50 36.00 ASME B16.9 BE BE A403 WP 316 S/WX S01
ELBOW LONG RADIUS 90 DEG 1.00 4.00 ASME B16.9 BE BE A403 WP 316W S01
STRAIGHT TEE 0.50 36.00 ASME B16.9 BE BE A403 WP 316 S/WX S01
STRAIGHT TEE 1.00 4.00 ASME B16.9 BE BE A403 WP 316W S01
REDUCING TEE 0.75 36.00 ASME B16.9 BE BE A403 WP 316 S/WX S01
REDUCING TEE 1.00 4.00 ASME B16.9 BE BE A403 WP 316W S01
WELDOLET 2.00 36.00 NORSOK EDS NOL1 BE BE A182 F316 S01
REINFORCED NIPOFLANGE 2.00 36.00 NORSOK EDS NOL1 BE RF A182 F316 S01
BLIND FLANGE 0.50 24.00 ASME B16.5 RF A182 F316 S01
BLIND FLANGE 0.50 24.00 ASME B16.5 RF A240 316 S01
BLIND FLANGE 30.00 36.00 MSS SP-44 RF A182 F316 S01
BLIND FLANGE 30.00 36.00 MSS SP-44 RF A240 316 S01
WELDNECK FLANGE 0.50 24.00 ASME B16.5 NAF1 RF BE A182 F316 S01
WELDNECK FLANGE 30.00 36.00 MSS SP-44 NAF1 RF BE A182 F316 S01
WELDNECK ORIFICE FLANGE 1.00 24.00 ASME B16.36 NAF1 RF BE A182 F316 S01
SPECTACLE BLIND 0.50 12.00 NORSOK EDS NLB1 FF FF A182 F316 S01
SPECTACLE BLIND 0.50 12.00 NORSOK EDS NLB1 FF FF A240 316 S01
SPADE 14.00 36.00 NORSOK EDS NLB1 FF FF A182 F316 S01
SPADE 14.00 36.00 NORSOK EDS NLB1 FF FF A240 316 S01
SPACER 14.00 36.00 NORSOK EDS NLB1 FF FF A182 F316 S01
SPACER 14.00 36.00 NORSOK EDS NLB1 FF FF A240 316 S01
GRAPHITE/METAL
GASKET FLAT 0.50 36.00 ASME B16.21 RF RF
LAMIN
6000
HEX HEAD PLUG 0.50 1.00 ASME B16.11 MT A182 F316
LBS
STUD BOLT C/W NUTS 0.50 36.00 ASME B16.5 NBO1 A320 L7/A194 7

BALL VALVE FULL BORE 2.00 4.00 BLBS10R RF RF CL 300 071,072,081

BALL VALVE FULL BORE 2.00 36.00 BLBS40R RF RF CL 300 081
BALL VALVE NON CONTACT 2.00 24.00 BLBS80R RF RF CL 300
BALL VALVE REDUCED BORE 3.00 6.00 BLBS00R RF RF CL 300 071,072,081
BALL VALVE REDUCED BORE 3.00 36.00 BLBS30R RF RF CL 300 081
GATE VALVE WEDGE 0.50 1.00 GTRS00D BE FT CL 800
GATE VALVE WEDGE 0.50 1.50 GTBS00R RF RF CL 300
GATE VALVE WEDGE 0.50 1.50 GTRS00B BE BE CL 800
GATE VALVE WEDGE 2.00 36.00 GTBS10R RF RF CL 300
GLOBE VALVE SWIVELLING 0.50 1.50 GBBS00R RF RF CL 300
GLOBE VALVE SWIVELLING 0.50 1.50 GBDS00B BE BE CL 600
GLOBE VALVE SWIVELLING 2.00 10.00 GBBS10R RF RF CL 300
BUTTERFLY VALVE FLANGED 30.00 36.00 BUBS80R RF RF CL 300
METAL SEAT
BUTTERFLY VALVE WAFER SOFT 4.00 24.00 BUBS20R RF RF CL 300
SEAT
CHECK VALVE DUAL WAFER 2.00 36.00 CHBS50R RF RF CL 300
CHECK VALVE PISTON 0.50 1.50 CHBS00R RF RF CL 300
CHECK VALVE PISTON 0.50 1.50 CHDS00B BE BE CL 600
DOUBLE BLOCK AND BLEED 1.00 3.00 CBBS10R RF RF CL 300

Notes :
001 REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175.
002 THE WALL THICKNESS TOLERANCE IS USED FOR DESIGN AND IS NOT PART OF THE PURCHASE SPECIFICATION WHEN DEVIATING FROM THE
INDIVIUAL PIPING ITEMS.
009 DUE TO STRESS COROSION CRACKING (SCC) THE CLASS IS LIMITED TO 60 DEG C.
071 IF ACTUATOR IS REQUIRED USE TRUNNION MOUNTED BALL VALVE.
072 IF BALL VALVE IS SELECTED IN RELIEF SYSTEM USE TRUNNION MOUNTED BALL VALVE.
081 OPERATING TEMP. -46 DEG C TO 150 DEG C.