Service Manual: Prosound Α6

Ultrasound Diagnostic Instrument
ProSound α6
Service Manual
Volume 2
English Version
Document Number: MN2-2048
Document Revision: 0
Copyright©
MN2-2048 Rev.0
ProSound ALPHA6 Service Manual
ProSound ALPHA6 Service Manual VOLUME 1 Index

Page
Chapter 1 Introduction
1-1 Service Manual ‥‥‥‥････････ 1-1

1-2 Contents of this Service Manual ‥‥‥‥‥‥‥‥ 1-1
1-3 Construction of This Service Manual ‥‥‥‥‥‥‥‥ 1-1
1-4 Contents of Each VOLUME/Chapter ‥‥‥‥‥‥‥‥ 1-2
1-5 Precautions Against Electrical Hazards ‥‥‥‥‥‥‥‥ 1-3
1-6 Precautions Against Mechanical Hazards ‥‥‥‥‥‥‥‥ 1-3
1-7 Precautions Against Germ Hazards ‥‥‥‥‥‥‥‥ 1-3
1-8 Precautions to ensure safety of software ‥‥‥‥‥‥‥‥ 1-4
1-9 Precautions for software safety of maintenance tools‥‥‥ 1-4
1-10 Precautions regarding handling of patient data‥‥‥‥‥‥ 1-5
1-11 Preparation to be made before visit customer‥‥‥‥‥‥‥ 1-5
1-12 Care to be taken in the Field ‥‥‥‥‥‥‥‥ 1-5
1-13 Handling of PCB ‥‥‥‥‥‥‥‥ 1-6
1-14 WEEE Directive and RoHS Directive ‥‥‥‥‥‥‥‥ 1-6
1-15 EMC and EMI ‥‥‥‥‥‥‥‥ 1-7
1-16 System Symbols ‥‥‥‥‥‥‥‥ 1-10
Chapter 2 Service Process
2-1 Repair work on the description of Service Manual‥‥‥‥‥‥‥‥ 2-1

2-2 Upgrade work on the description of Service Manual‥‥‥‥‥‥･･ 2-6
Chapter 3 Install/Disassemble
ProSound ALPHA6 Disassemble Instruction ‥‥‥‥‥‥‥‥ 3-1

How to use this instruction ‥‥‥‥‥‥‥‥ 3-2
Parts Identification/Individual Unit Layout ‥‥‥‥‥‥‥‥ 3-4
Disassembling Flowchart ‥‥‥‥‥‥‥‥ 3-5
Disassembly Diagram ‥‥‥‥‥‥‥‥ 3-7
Details_03 ‥‥‥‥‥‥‥‥ 3-25
Details _04 ‥‥‥‥‥‥‥‥ 3-29
Details _05 ‥‥‥‥‥‥‥‥ 3-37
Details _07 ‥‥‥‥‥‥‥‥ 3-39
Details _10 ‥‥‥‥‥‥‥‥ 3-43
Details _11 ‥‥‥‥‥‥‥‥ 3-45
Details _12 ‥‥‥‥‥‥‥‥ 3-46
1/4
MN2-2048 Rev.0
Details _13 ‥‥‥‥‥‥‥‥ 3-49
Chapter 4 System Overview
4-1 System Specification ‥‥‥‥‥‥‥‥ 4-1

4-2 System Configuration ‥‥‥‥‥‥‥‥ 4-13
4-3 System Block Diagram ‥‥‥‥‥‥‥‥ 4-13
4-4 Configuration of System ‥‥‥‥‥‥‥‥ 4-17
4-4-1 System Control ‥‥‥‥‥‥‥‥ 4-17
4-4-2 Tx/Rx Unit ‥‥‥‥‥‥‥‥ 4-19
4-4-3 Digital Imaging Unit ‥‥‥‥‥‥‥‥ 4-25
4-4-4 Physiological Signal Displaying Unit ‥‥‥‥‥‥‥‥ 4-31
4-4-5 Power Supply Unit ‥‥‥‥‥‥‥‥ 4-33
4-4-6 LCD Monitor ‥‥‥‥‥‥‥‥ 4-35
Chapter 5 Trouble Shooting
5-1 Introduction ‥‥‥‥‥‥‥‥ 5-1

5-2 Precautions ‥‥‥‥‥‥‥‥ 5-1
5-3 Tools and Measuring Instruments Required ‥‥‥‥‥‥‥‥ 5-4
5-4 Information ‥‥‥‥‥‥‥‥ 5-5
5-4-1 Stand-by mode ‥‥‥‥‥‥‥‥ 5-5
5-4-2 Operation steps after turn on the equipment‥‥‥‥‥‥‥‥ 5-5
5-4-3 User-defined function setting ‥‥‥‥‥‥‥‥ 5-7
5-4-4 Resetting the backup data ‥‥‥‥‥‥‥‥ 5-7
5-4-5 How to backup the data ‥‥‥‥‥‥‥‥ 5-8
5-4-6 How to reset the backup data ‥‥‥‥‥‥‥‥ 5-9
5-4-7 Action to be taken if the equipment fails to startup‥‥‥‥‥ 5-10
5-4-8 Check Power Supply ‥‥‥‥‥‥‥‥ 5-12
5-4-9 LED on Backplane ‥‥‥‥‥‥‥‥ 5-14
Chapter 6 Performance Check

6-2 Attention ‥‥‥‥‥‥‥‥ 6-1
6-3 Making entries in repair report ‥‥‥‥‥‥‥‥ 6-1
6-4 Performance Check ‥‥‥‥‥‥‥‥ 6-2
6-4-1 Functional check ‥‥‥‥‥‥‥‥ 6-3
6-4-2 Image Quality check ‥‥‥‥‥‥‥‥ 6-13
6-4-3 Safety check ‥‥‥‥‥‥‥‥ 6-16
2/4
MN2-2048 Rev.0
Check Sheet ‥‥‥‥‥‥‥‥ 6-18
Revision History
VOLUME 1 Revision History ‥‥‥‥‥‥‥‥ 1/2
3/4
MN2-2048 Rev.0
ProSound ALPHA6 Service Manual VOLUME 2 Index

Chapter 1 System Operation
Chapter 2 Schematics
Connection Diagram ‥‥‥‥‥‥‥‥ 2-1

Cables ‥‥‥‥‥‥‥‥ 2-3
PEU-ALPHA6 ‥‥‥‥‥‥‥‥ 2-14
Independent probe connection Unit ‥‥‥‥‥‥‥‥ 2-17
Back Plane ‥‥‥‥‥‥‥‥ 2-19
Rx Jumper ‥‥‥‥‥‥‥‥ 2-35
Peripheral I/O ‥‥‥‥‥‥‥‥ 2-37
Chapter 3 Service Information

3-2 Assignment of CTRL key and those usage‥‥‥‥‥‥‥‥ 3-1
3-2-1 CTRL+R ‥‥‥‥‥‥‥‥ 3-2
3-2-2 CTRL+W ‥‥‥‥‥‥‥‥ 3-3
3-2-3 CTRL+E ‥‥‥‥‥‥‥‥ 3-4
3-2-4 CTRL+T ‥‥‥‥‥‥‥‥ 3-4
3-2-5 CTRL+S ‥‥‥‥‥‥‥‥ 3-4
3-3 Maintenance Menu ‥‥‥‥‥‥‥‥ 3-5
Chapter 4 Adjustment
Chapter 5 Parts list
5-1 Contents of Parts List ‥‥‥‥‥‥‥‥ 5-1

5-2 Appliance of Parts List ‥‥‥‥‥‥‥‥ 5-2
5-3 Outline of Parts List ‥‥‥‥‥‥‥‥ 5-2
5-4 Explanation of Parts List ‥‥‥‥‥‥‥‥ 5-3
5-5 Attention ‥‥‥‥‥‥‥‥ 5-4
5-6 Parts List ‥‥‥‥‥‥‥‥ 5-5
Revision History
VOLUME 2 Revision History ‥‥‥‥‥‥‥‥ 1/2
4/4
Chapter 1
SYTSTEM OPERATION
APPENDIX
MN2-2048 Rev.0
Chapter 1 SYSTEM OPERATION
1-1 Introduction
There is no description in this section for this revision of the service manual.
1-1
MN2-2048 Rev.0
Chapter 1 SYSTEM OPERATION
(Blank page)
1-2
Chapter 2
SCHEMATICS
APPENDIX
MN2-2048 Rev.0
Chapter 2 SCHEMATICS
TITL MODE 1
CABLE CONNECTION Prosound ALPHA6 2
2-1
MN2-2048 Rev.0
TITL MODE 2
CABLE CONNECTION Prosound ALPHA6 2
2-2
J850
2-3
PSU EU-6046
J150
BackPlane EP5551
TITLE MODEL
CABLE 150 CO-PSC-145-A-02C5
MN2-2048 Rev.0
MN2-2048 Rev.0
J851
PSU EU-6046
J151
2-4
BackPlane EP5551
TITLE MODEL
CABLE 151 CO-PSC-145-B-03C2
J152
BackPlane EP5551 J852
PSU EU-6046
2-5
TITLE MODEL
CABLE 152 L-CABLE-849-01C4
MN2-2048 Rev.0
MN2-2048 Rev.0
J160, 163
2-6
BackPlane EP5551
TITLE MODEL
CABLE 160,163 D1225C12B5AZ-20
J180
2-7
BackPlane EP5551
TITLE MODEL
CABLE 180 CO-PSC-145-U-01C5
MN2-2048 Rev.0
MN2-2048 Rev.0
J323
Monitor Peripheral IO EP5558
TITLE MODEL
2-8
J502
J325 Panel
Peripheral IO EP5558
2-9
TITLE MODEL
MN2-2048 Rev.0
MN2-2048 Rev.0
J520
J326 Front USB port
2 - 10
TITLE MODEL
J500
J341 Panel
2 - 11
TITLE MODEL
MN2-2048 Rev.0

MN2-2048 Rev.0
J501
2 - 12
FPD-PS
Panel Monitor
TITLE MODEL
2 - 13
Monitor Arm Earth cable
TITLE MODEL
CABLE 720 CO-PSC-145-F-02C0
MN2-2048 Rev.0
MN2-2048 Rev.0
PEU-ALPHA6
MODEL
CABLE CONNCTION
TITLE
2 - 14
MN2-2048 Rev.0
CO-PEU-920-A
MODEL
CABLE 710
TITLE
2 - 15
MN2-2048 Rev.0
TITLE MODEL
CABLE 612 L-CABLE-860-C-A
2 - 16
MN2-2048 Rev.0
CO-EU-9134-02C2
MODEL
CABLE 216
TITLE
2 - 17
MN2-2048 Rev.0
(Blank page)
2 - 18
MN2-2048 Rev.0
2 - 19
MN2-2048 Rev.0
2 - 20
MN2-2048 Rev.0
2 - 21
MN2-2048 Rev.0
(Blank Page)
2 - 22
MN2-2048 Rev.0
2 - 23
MN2-2048 Rev.0
2 - 24
MN2-2048 Rev.0
2 - 25
MN2-2048 Rev.0
2 - 26
MN2-2048 Rev.0
2 - 27
MN2-2048 Rev.0
2 - 28
MN2-2048 Rev.0
2 - 29
MN2-2048 Rev.0
2 - 30
MN2-2048 Rev.0
2 - 31
MN2-2048 Rev.0
2 - 32
MN2-2048 Rev.0
2 - 33
MN2-2048 Rev.0
2 - 34
Z1
F1
Z1
F1
A1
B1
E1
A1
B1
E1
C1
D1
C1
D1
TITLE
P241
P222
EP555400**
Rx Jumper
Z25
F25
Z25
F25
A25
B25
E25
A25
B25
E25
C25
D25
C25
D25
P241 Z A B C D E F P222 Z A B C D E F
To EP5555 1 GND PREOUT46 GND PREOUT47 GND - GND 1 GND PREOUT46 GND PREOUT47 GND - GND
From EP5553
MODEL
2 GND PREOUT44 GND PREOUT45 GND - GND 2 GND PREOUT44 GND PREOUT45 GND - GND
2 - 35
EP555400**
MN2-2048 Rev.0
25 GND GND GND GND GND - GND 25 GND GND GND GND GND - GND
MN2-2048 Rev.0
(Blank Page)
2 - 36
MN2-2048 Rev.0
2 - 37
MN2-2048 Rev.0
2 - 38
MN2-2048 Rev.0
2 - 39
MN2-2048 Rev.0
2 - 40
MN2-2048 Rev.0
2 - 41
MN2-2048 Rev.0
2 - 42
MN2-2048 Rev.0
2 - 43
MN2-2048 Rev.0
2 - 44
MN2-2048 Rev.0
2 - 45
MN2-2048 Rev.0
2 - 46
MN2-2048 Rev.0
2 - 47
MN2-2048 Rev.0
2 - 48
MN2-2048 Rev.0
2 - 49
MN2-2048 Rev.0
2 - 50
MN2-2048 Rev.0
2 - 51
MN2-2048 Rev.0
(Blank Page)
2 - 52
Chapter 3
SERVICE INFORMATION
APPENDIX
MN2-2048 Rev.0
Chapter 3 SERVICE INFORMATION
3-1 Introduction
Service Information is the information that service engineer should know when he carries out
repairing the equipment as well as some useful information.
3-2 Assignment of CTRL key and those usage
To function assigned commands, you need to input [CTRL] key and some keys. If the optional full
keyboard (EU-9133) is installed, press [CTRL] key and the specific key at the same time with full
keyboard.
If full key board is not installed, press [Keyboard] switch on operation panel then press [CTRL]
key with virtual keyboard displayed on LCD touch panel and then press the specific key with
virtual key board.
● Caution ●
Those commands include erasing user data, make a back up beforehand
executing commands when necessary.
Command Input at Function
Back to factory default

3-2-1 CTRL + R Preset List screen
(Erase all user data)
Erase all patient data including

3-2-2 CTRL + W Preset List screen stored image
(Except Preset data)
Erase all Preset data

3-2-3 CTRL + E Preset List screen
(Back to factory default)
Highlight items which have been

3-2-4 CTRL + T Each preset setting page changed from factory default on
each preset setting screen.
3-2-5 CTRL + S Preset List screen Enter Maintenance menu
See pages downward for command detail.
3-1
MN2-2048 Rev.0
3-2-1. CTRL + R
All stored user data in internal hard disk will be erased and be back to factory default.
The message below will be displayed when input the command. Press [OK] to execute.
After initializing, you need to reboot the system by yourself.
The message displayed when you input the command, press [OK] to execute
It is necessary to shutdown (reboot) the system after displaying this message
● Initialized (erased) data

¾ All Patient database
¾ All images stored in internal hard disk
¾ All Preset data
● Not Initialized data
¾ Functions activated by Package Software
¾ Initial Configuration
Set Initial Configuration displayed after rebooting. Setting for each region is listed below.
Initial Configuration (For Export NTSC, Canada, AA)

OB Measurement America
Language English
Keyboard English
Power Limit 2 On
Initial Configuration (For Export PAL, China)

Language English
Keyboard English
Power Limit 2 On
3-2
MN2-2048 Rev.0
3-2-2. CTRL + W
Erase all patient data stored in internal hard disk. The message below will be displayed when
you input the command, press [OK] to execute. After erasing data, the system will reboot
automatically.
The message displayed when you input the command, press [OK] to execute.
● Initialized (erased) data

¾ All images stored in internal hard disk
● Not initialized data
¾ All Preset data
3-3
MN2-2048 Rev.0
3-2-3. CTRL + E
All stored Preset data in internal hard disk will be erased and be back to factory default. The
message below will be displayed when you input the command, press [OK] to execute. After
erasing data, the system will reboot automatically.
The message displayed when you input the command, press [OK] to execute.
● Initialized (Erased) data

¾ All Preset data
● Not initialized data
¾ All stored images stored in internal hard disk
Set Initial Configuration displayed after rebooting. Setting for each region is listed below.
Initial Configuration (For Export NTSC, Canada, AA)

Language English
Keyboard English
Power Limit 2 On
Initial Configuration (For Export PAL, China)

Language English
Keyboard English
Power Limit 2 On
3-2-4. CTRL + T
The items which have been changed from factory default will be highlighted on each page of
preset setting when you input this command..
3-2-5. CTRL + S
Enter Maintenance menu when you input the command at Preset list screen. About
maintenance menu, refer 3-3.
3-4
MN2-2048 Rev.0
3-3 Maintenance menu
Maintenance Menu is the function that supports service engineer to carry out
repair/maintenance work as well as upgrading the software. This function is not
open for the general users.
● Caution ●
You need to turn off the power to disable the maintenance function.
Make sure to do cycle the power after using the maintenance function.
3-3-1. How to enter Maintenance menu
If the optional full keyboard (EU-9133) is installed, press [CTRL] key and [ S ] key at the
same time with full keyboard.
If full key board is not installed, press [Keyboard] switch on operation panel then press
[CTRL] key with virtual keyboard displayed on LCD touch panel and then press [ S ] key with
virtual key board.
Set-UpScreen
• Serial No:
Serial Number of this equipment.
3-5
MN2-2048 Rev.0
Normally this S/N is input at factory. You need to input when you exchange HDD (In case
upgrade /repair by changing HDD)
o Input S/N except ‘M’ ex) M00100 Æ 00100
* You can NOT change S/N when you reboot the system after inputting S/N.
• Checker´s Name:
Name of service enginner who input the S/N of the system. It can be changed at anytime.
3-3-2. Function of Maintenance Menu –UP GRADE
UP GRADE screen
3-6
MN2-2048 Rev.0
1) User’s Data Back-Up
You can handle data by group stored in internal hard disk.
[Back-Up Data Save]

Following data can be stored together to external media.
- All Preset data
*Except network setting such as Local IP address
- All Patient database
- All images (Single data and multi data)
*Except data stored in CD-R Buffer, Local HD2
- Other data stored in internal hard disk.
[Back-Up Data Restore]

Restore the data stored by [Back-Up Data Save].
2) Version Up
Execute software version up. Refer Procedure sheet of each kits for detail procedure. All user presets
and condition of Package software (Open/Lock) continue after version up.
※You may need to prepare external FD drive or USB memory.
3) Package Software
Open/Mask Package software with key media such as Floppy dsik. Refer Procedure sheet of each kits
for detail procedure.
※ You may need to prepare external FD drive or USB memory.
4) Printer Installation
Install Printer driver for connecting external PC printer. You need to prepare a printer driver which you
want to install in USB memory, then follow wizard of Printer driver installation given by Windows.
Refer User’s manual of each printer for operation.
● Caution ●
There is no guarantee to all behavior of
This is the example procedure of installation when connecting PIXUS iP4500 (CANON).
o Preparation
Download the suitable printer driver from CANON website.
File name: ip4500svst211ej.exe
Unpack downloaded file with suitable unpacking software.

Created folder name: ip4500svst211ej
Confirm the following file exists in created folder.

File name: ip4500.inf
3-7
MN2-2048 Rev.0
Copy all file in created folder[ip4500svst211ej] to USB memory, and then connect
it to USB port at front of the equipment.
o Press [Printer Installation] button at maintenance menu.

Connect PC printer to USB port(J328 or J330) at Peripheral I/O board then turn on PC
printer in accordance with the displayed massage below.
o Follow „Found New Hardware Wizard“

Select No,not this time then press Next>
Select Install from a list or specific location (Advanced) then press Next>
3-8
MN2-2048 Rev.0
Check Include this location in the search then assign the folder which includes the file
“ip4500.inf” with Browse button.
Next> → Copying files → Install finished
Copying files
Install finished
3-9
MN2-2048 Rev.0
(Blank page)
3 - 10
Chapter 4
ADJUSTMENT
APPENDIX
MN2-2048 Rev.0
4-1 Introduction
ProSound ALPHA6 is fully digitized machine, so there is no part requires to be adjusted at the field.
4-1
MN2-2048 Rev.0
(Blank page)
4-2
Chapter 5
PARTS LIST
APPENDIX
MN2-2048 Rev.0
Chapter 5 PARTS LIST
5-1 Contents of Parts List
Parts are separately shown as each portion of equipment. When you find the part, firstly choose
the portion the part belonged, then open the page suggested with “INDEX”.
MONITOR
SEE INDEX 06
MONITOR ARM
SEE INDEX 07
OPERATION PANEL
SEE INDEX 02
PHYSIOLOGICAL
SIGNAL UNIT
SEE INDEX 05
FULL KEYBOARD
MAIN BODY
SEE INDEX 09
SEE INDEX 01
USM-35* UNIT
SEE INDEX 04
INDEPENDENT
PROBE
CONNECTION UNIT
SEE INDEX 08
POWER SUPPLY UNIT

SEE INDEX 03
MOUNTING RACK and FIXTURE LABEL

SEE INDEX 10 SEE INDEX 11
5-1
MN2-2048 Rev.0
5-2 Appliance of Parts List
This Parts List consists of the parts for technical service and maintenance.
Therefore, the parts model name (PARTS No.) is only valid to the technical support. When you
order the parts shown in the List, please apply to our technical support section.
You are supposed to understand well that it is not valid to refer any of the description in this
document for other purpose than maintenance.
5-3 Outline of Parts List
This Parts List shows many parts which are selected for the technical support and maintenance,
and made with the illustrations and Lists. These parts are selected based on the guidelines
below,
9 For the surface of the equipment such as Cover and Connector
9 Machinery and things to be broken without difficulty
9 Operation panel including the Knob and Switch
9 Cables
Excluding one soldered to the other part directly
9 PCB
Please refer to the History which has been issued separately, because almost of the
PCBs have the revisions.
9 The things to be replaced frequently such as the variable resistor for the panel
9 Things to be needed additionally for the technical support.
5-2
MN2-2048 Rev.0
5-4 Explanation of Parts List
This Parts List is divided into some blocks (INDEX), and each block consists of the illustration
and list.
Index number linked to drawing Range of serial numbers to apply
Description of Index Model name of Index
INDEX UNIT S/N

MAIN BODY
01 USI-148
Serial
Item Code Part number Description Spec.
Number
1 A200876 SAP-1700-01-01 COVER:TOP
(2) A120026 PSC-116#7 INTERMEDIATE DECK COVER ~6200030
2 A120027 PSC-116#7B INTERMEDIATE DECK COVER 6200031~
3 A800041 L-CABLE-216 CABLE:J705-J607 For OPTION
Part description for each item
Range of serial numbers to apply

Part number for each item
Part Code (currently not used) Specification for each item
Item number linked to drawing
21 * A120033 PSC-116#8 PROBE HOLDER
INDEX The INDEX number represents individual Parts List (illustrations and Lists)
that is divided into several parts that correspond to the blocks in the illustration of whole
equipment at the beginning.
UNIT The name of this block (or unit) indicated by INDEX.

If the same block or unit will be revised, it will be distinguished with this and next S/N
S/N If the same block or unit will be revised, it will be distinguished with UNIT, and this
shows the beginning of production change.
Item Relation numbers between illustration and List.

If the item number were in brackets ”()”, this may not be available. Instead, please choose the
substitution shown with the same item number.
Code Code number applied to each part. However, it is not in use.
Part number This is the part number.
Serial Number Applicable serial numbers.

If it shows “xxxxx~ “, the part is available to the serial number or after. On the other hand,
“~xxxxx” means that is valid to the serial number and before. No description means it is serial
number independent.
Spec. The specification, some differences on shipment, and the other remarks are shown.
5-3
MN2-2048 Rev.0
5-5 Attention
z Do not use previous versions of Parts List.

The part number may be changed between previous and current version even with the same parts.
You therefore need to use the current one.
z Refer to the “History” information for ordering of PCB.

This Parts List does not mention the PCB revision (Or it would not be the latest). Therefore, when
you order a PCB, please consult to the “History” information issued separately.
z Any part that is not described in this parts list will not be provided.
5-4
MN2-2048 Rev.0
5-6 Parts List
The Parts List is shown from next page that is arranged by the order of “INDEX”. Please refer
to the figure in the page 5-1 for the location in the equipment.
5-5
MN2-2048 Rev.0
01 MAIN BODY USI-160* S/N
7
2
15
1 3 11
×2
5-6
MN2-2048 Rev.0
11
1
×2
5-7
MN2-2048 Rev.0
14
12
14
10
13
23
27
28
29
26
24
25
30
5-8
MN2-2048 Rev.0
16 ×3
18
21
20
22 19
17
17
16 ×3
5-9
MN2-2048 Rev.0
INDEX DESCRIPTION UNIT S/N

01 MAIN BODY USI-160*
Item Code Part number Description Serial number Specification
1 A650017 DC100BT5／W412
CASTER
2 A120402 MP-CV-A6-1(1)
COVER : FRONT BASE(LEFT)
3 A120403 MP-CV-A6-1(2)
COVER : FRONT BASE(RIGHT)
4 A120404 SAP-A6-01-04 Arrange label, See
COVER : FRONT
Index11 for detail
5 A120405 SAP-A6-01-05
COVER : TOP
COVER : LEFT
Index11 for detail
COVER : RIGHT
Index11 for detail
COVER : REAR
Index11 for detail
9 A120409 SAP-A6-01-09
CABLE COVER
10 A120410 SAP-A6-01-10
COVER : PANEL
11 A130007 SAP-A6-01-11
FILTER
PANEL BASE REAR
Index11 for detail
13 A120412 SAP-A6-01-13
PANEL BASE FRONT
14 A201904 SAP-A6-01-14
HANGER STAND（right, left)
15 A120413 SAP-A6-01-15
PEDAL
16 A120392 MP-PH5
HOOK-TYPE HOLDER(right,left)
17 A120342 MP-PH-ADAPTER-2
HOOK-TYPE HOLDER ADAPTER
18 A120393 MP-PH6
JELLY HOLDER
19 A120394 PSC-116 (53)
JELLY CUP
20 A120414 SAP-A6-01-20
HOLDER FXTURE1(RIGHT HOOK-TYPE)
21 A120415 SAP-A6-01-21
HOLDER FXTURE2(JELLY)
22 A120416 SAP-A6-01-22
HOLDER FXTURE3(LEFT HOOK-TYPE)
23 A624017 CO-PSC-145-U-01C5
SPEAKER Excluding Fixture
24 A803061 L-CABLE-405-05
POWER CABLE
25 A803062 L-CABLE-405-16
POWER CABLE
26 A803119 EP558600**
FOOT-SW PCB
5 - 10
MN2-2048 Rev.0

01 MAIN BODY USI-160*
27 A803120 L-CABLE-848-09C2
CABLE: CABLE326
28 A803121 L-CABLE-873-10C0
CABLE: B/W Printer USB Cable
29 A803122 L-CABLE-874-10C0
CABLE: Color Printer USB Cable
30 A201905 SAP-A6-01-30
LINK PARTS
5 - 11
MN2-2048 Rev.0
02 OPERATION PANEL L-KEY-105* S/N
1
2
* Excluding label (item#1)
6 ×8
3
15
5 ×3
7
5
×2
16
5 - 12
MN2-2048 Rev.0
KEY CAP
14 (FUNCTION)
×10
KEY CAP
12 (ROUND)
×21
KEY CAP
13 (OVAL)
×2
11
10
5 - 13
MN2-2048 Rev.0
17 17
17 9
5 - 14
MN2-2048 Rev.0

02 OPERATION PANEL L-KEY-105*
1 A600330 P-32-A6-1
TITEL LABEL
2 A201906 L-KEY-105* Excluding
OPERATION PANEL
Label(Item#1)
3 A120417 SAP-A6-02-03
PANEL CASE (TOP)
4 A120418 SAP-A6-02-04
PANEL CASE (BOTTOM)
5 A510083 SP-4148
KNOB(S)
6 A510084 SP-4135B
STC KNOB
7 A510073 SP-4147
KNOB(M)
8 A201832 MA47640
DIAL(LARGE)
9 A201834 MA47642:FREEZE
KEY TOP : FREEZE
10 A618039 L-TB-15
TRACK BALL
11 A611447 MA47651-001
PADDLE-ASM
12 A510074 SP-4137
KEY CAP : ROUND(Large)
13 A510075 SP-4136
KEY CAP : OVAL
14 A510076 SP-4146
KEY CAP : FUNCTION(Large)
15 A201907 SA-ND1040-2351-001
STC PCB
16 A201908 SA-ND1040-2352-001
IF PCB
17 A201909 SA-ND1040-2353-001
KEY TOP SHEET SET
5 - 15
MN2-2048 Rev.0
03 POWER SUPPLY UNIT EU-6046* S/N:
5 5
For 100V. For 200V.
4 For 100V.
4 For 200V.
5 - 16
MN2-2048 Rev.0

03 POWER SUPPLY UNIT EU-6046*
1 A030110 EU-6046*
POWER SUPPLY UNIT
2 A621108 215008MXP
FUSE
3 A625067 TJU0Y0005001G001
EU-6046 FAN UNIT
4 A030100 CP-116 Arrange label, See
SUB POWER SUPPLY CABLE
Index11 for detail
4 A030101 CP-117 Arrange label, See
SUB POWER SUPPLY CABLE
Index11 for detail
5 A201910 MP-FX-A6-10
LOCK FITTINGS
5 A201911 MP-FX-A6-11
LOCK FITTINGS
5 - 17
MN2-2048 Rev.0
04 USM-35* UNIT USM-35* S/N:
※ Item 1 は欠番です。
11 Back Plane
10 9 8 7 6 5 4 3 2
12 RX Jumper
TOP VIEW
5 - 18
MN2-2048 Rev.0
13
18 PM-A7-H001B
19
EU-9119B
20 21
5 - 19
MN2-2048 Rev.0
14
15
16 17
5 - 20
MN2-2048 Rev.0

04 USM-35 USM-35*
2 A803123 EP555200**
PCB : PROBE SELECTOR
3 A803124 EP555300**
PCB : TxRx48ch
4 A803125 EP555700**
PCB : STCW
5 A803126 EP555500**
PCB : DBF&TP
6 A803127 EP556000**
PCB : RT3D SERVO
7 A803128 EP554101**
PCB : BEAM PROCESSOR
8 A803129 EP550001**
PCB : DOM
8 A803078 EP550000**
PCB : DOM
9 A803079 EP539800**
PCB : MVP
9 A803130 EP539801**
PCB : MVP
10 A803131 EP537001**
PCB : CPU
10 A803081 EP537000**
PCB : CPU
11 A803132 EP555100**
PCB : BACK PLANE
12 A803133 EP555400**
PCB : RX JUMPER
13 A803134 EP555800**
PCB : PERIPHERAL-I/O
14 A625068 D1225C12B5AZ-20
CABLE: CABLE160,CABLE163(FAN)
15 A803135 L-CABLE-849-01C4
CABLE: CABLE152
16 A803136 CO-PSC-145-A
CABLE: CABLE150
17 A803137 CO-PSC-145-B
CABLE: CABLE151
18 A803080 EP540900**
PCB : MVPOP
19 A803055 LK2146
PCB : DV BOARD ASSY
20 A650018 KE-462
Cable for IEEE1394
21 A650019 KE-942
Cable for IEEE1394
* Item No.1 is absent
5 - 21
MN2-2048 Rev.0
05 PHYSIOLOGICAL SIGNAL UNIT PEU-ALPHA6 S/N
Label
5 - 22
MN2-2048 Rev.0

05 PHYSIOLOGOCAL SIGNAL UNIT PEU-ALPHA6
1 A803138 EP555600**
PCB : Physio. Amp
2 A803139 CO-PEU-920-A
CBL710
3 A803140 L-CABLE-860-C-A
DC IN CABLE
4 A600331 PEU-A6(4)
LABEL : INDICATION
5 - 23
MN2-2048 Rev.0
06 MONITOR IPF-1503 S/N
5 4
5 - 24
MN2-2048 Rev.0

06 MONITOR IPF-1503
1 A201847 MP-CV-ALPHA7-2(1) Arrange label, See

COVER : ESCUTCHEON
Index11 for detail
2 A201848 MP-CV-ALPHA7-2(2) Arrange label, See
COVER : REAR
Index11 for detail
3 A201849 MP-CV-ALPHA7-2(3)
COVER : SMALL REAR
4 A201850 MP-CV-ALPHA7-2(4)
COVER : SIDE
5 A650020 HL1566
15InchLCD
6 A150185 L-KI-928
FILTER
5 - 25
MN2-2048 Rev.0
07 MONITOR ARM PSC-145-3 S/N
※ Item 1 は欠番です。
2 TILT ASSY
3 ARM ASSY
5 - 26
MN2-2048 Rev.0

07 MONITOR ARM IPF-1503
2 A201913 SAP-A6-07-02
TILT ASSY
3 A201914 SAP-A6-07-03
ARM ASSY
COVER : MONITOR ARM
Index11 for detail
5 A120420 PSC-141-3(23)
COVER : TILT
6 A140373 F-51A
HINGE
7 A110322 SAP-A6-07-07
FIXING METAL
* Item No.1 is absent
5 - 27
MN2-2048 Rev.0
INDEPENDENT PROBE
08 CONNECTION UNIT EU-9134 S/N
5 - 28
MN2-2048 Rev.0

08 INDEPENDENT EU-9134
1 A803141 CO-EU-9134-02C2
CABLE216
2 A600332 P-32-EU-9110-1B
LABEL : INDICATION
5 - 29
MN2-2048 Rev.0
09 FULLKEYBOARD UNIT EU-9133 S/N
5 - 30
MN2-2048 Rev.0

09 FULL KEYBOARD EU-9133
1 A130008 L-KEY-105-KEYBD-GBR
FULL-KEYBOARD UNIT
2 A201842 L-LAMP-7
LAMP UNIT
5 - 31
MN2-2048 Rev.0
10 MOUNTING RACK / FIXTURE S/N
MP-FX-A6-1
1 2
3 4
MP-FX-A6-2
5 6 7
8 9
5 - 32
MN2-2048 Rev.0
MP-FX-A6-3
10
MP-FX-A6-8
11
5 - 33
MN2-2048 Rev.0
PM-A6-H002
12 13 14 15 16
17 18 19 20 21
※For Other than ※For U.S.A

U.S.A
PM-A6-H003
12 22 14 15 23
24 18 25 21
5 - 34
MN2-2048 Rev.0
PM-A6-H004
26 27 14 15 28
29 30 31 32 33
Only for DV-800B
PM-A6-H005
34 27 14 35
30
5 - 35
MN2-2048 Rev.0

10 MOUNTING RACK FIXTURE OPTIONS
1 A100490 MP-FX-A6-1（1）
Mounting Plate 1
2 A110337 SAP-A6-10-02
Mounting Plate 2
3 A110338 SAP-A6-10-03
Mounting Rack
4 A110339 SAP-A6-10-04
Connector Cover
5 A110340 SAP-A6-10-05
Fixture A
6 A100491 MP-FX-A6-2 (5)
Fixture B (Front)
7 A100492 MP-FX-A6-2 (6)
Fixture C (Rear)
8 A110341 SAP-A6-10-08
Shelf
9 A110342 SAP-A6-10-09
Shelf Connector Cover
10 A110343 SAP-A6-10-10
Mounting Base
11 A110344 SAP-A6-10-11
Extension Base
12 A100493 MP-FX-A6-6 (1)
Fixture A (Front)
13 A100494 MP-FX-A6-6 (2)
Fixture B (Rear)
14 A100495 MP-FX-A6-4 (3)
Fixture C
15 A100496 MP-FX-A6-4 (4)
Fixture D (Rear)
16 A110345 SAP-A6-10-16
Connector Cover A
17 A110346 SAP-A6-10-17
Connector Cover B
18 A803142 L-CABLE-807
Power Supply Cable
19 A803143 L-CABLE-796
Signal Cable
20 A803144 L-CABLE-797
Signal Cable
21 A803145 L-CABLE-753
Video, Audio L/R Cable
22 A100497 MP-FX-A6-7 (2)
Fixture B (Rear)
23 A110347 SAP-A6-10-23
Connector Cover A
24 A110348 SAP-A6-10-24
Connector Cover B
25 A803146 KRS-403XF07K
Signal Cable
26 A100498 MP-FX-A6-4 (1)
Fixture A (Front)
5 - 36
MN2-2048 Rev.0

10 MOUNTING RACK FIXTURE OPTIONS
27 A100499 MP-FX-A6-4 (2)

Fixture B (Rear)
28 A110349 SAP-A6-10-28
Connector Cover A
29 A110350 SAP-A6-10-29
Connector Cover B
30 A803147 L-CABLE-405
Power Supply Cable
31 A803148 L-CABLE-759
DVI Cable
32 A803149 L-CABLE-758
USB Cable
33 A803150 L-CABLE-792
Audio L/R Cable
34 A100500 MP-FX-A6-5 (1)
Fixture A (Front)
35 A100501 MP-FX-A6-5 (4)
Fixture D (Rear)
5 - 37
MN2-2048 Rev.0

11 LABEL COMMON
Common label
* Included in each spare parts such as Covers
4 12 13 15 19
16
14
21
* Including labels below

PROBE4
Independent Probe connector blind
4 A600334 P-42109C
LABEL: for EU COVER : REAR
12 A600336 MP-CV-A6-1(19)
LABEL: Lock Pedal COVER : FRONT
13 A600337 MP-CV-A6-1(20)
LABEL: Panel Handle PANEL BASE REAR
14 A600338 P-32-SSD-ALPHA10-22C
LABEL: PROBE 1-4, FOOT SW COVER : FRONT
15 A600339 P-32-A6-4
LABEL: Indication, USB Connector COVER : FRONT
16 A600340 P-42-A6-1 HOLDER
LABEL: Caution, Probe Holder
FXTURE2(JELLY)
19 A600343 P-42-AOS100-1 COVER : FRONT,
LABEL: Caution, Pinch
MONITOR ARM
20 A600330 P-32-A6-1 Same part as Index2
TITEL LABEL
Item#1
21 A600344 P-32-PTUI900-3B
LABEL: Potential equalization COVER : REAR
5 - 38
MN2-2048 Rev.0
11 LABEL S/N
Common label
* Included in each spare parts
5 - 39
MN2-2048 Rev.0

11 LABEL JAPAN ONLY
* Japan only
3 A600333 P-3325B
LABEL: EMC for Japan COVER : REAR
5 - 40
MN2-2048 Rev.0
11 LABEL S/N
Japan Only
5 - 41
MN2-2048 Rev.0

11 LABEL AA ONLY
1 2 5
6
7 8
9 11
10 22
* AA only
Order labels additionally, when you order covers and so on
1 A600020 P-4246-UL
LABEL: Caution, Probe COVER : FRONT
2 A600213 P-4232UB-UL
LABEL: Caution, Probe Connection COVER : FRONT
5 A600113 P-4229B-UL
LABEL: Danger, Explosion COVER : REAR
6 A600016 P-4231B-UL
LABEL: Caution, Acoustic Exposure PANEL BASE REAR
7 A600023 P-4237-UL
LABEL: Warning, Fuse BASE
8 A600024 P-4238-UL
LABEL: Caution, Electric Shock COVER : REAR
9 A600246 P-4239U-UL
LABEL: Warning, Earth POWER SUPPLY CABLE
10 A600205 P-32-A.A.-UL
LABEL: FDA (Address A.A.) COVER : REAR
11 A600335 P-42118
LABEL: HG COVER : REAR
22 A600345 P-42117 COVER : MONITOR
LABEL: HG
REAR
5 - 42
MN2-2048 Rev.0
11 LABEL S/N
* AA only
5 - 43
MN2-2048 Rev.0

11 LABEL CV MODEL
* CV model additional label

Order labels additionally, when you order covers and so on
17 18
17 A600341 P-32-SSD-ALPHA10CV-1
LABEL: CV (Small) COVER : ESCUTCHEON
18 A600342 P-32-SSD-ALPHA10CV-3U
LABEL: CV (Large) COVER : RIGHT & LEFT
5 - 44
MN2-2048 Rev.0
11 LABEL S/N
* CV model only
5 - 45
MN2-2048 Rev.0

11 LABEL NOT AVAILABLE
* Labels below are NOT available as spare parts
ＡＬＯＫＡ ALOKA CO.,LTD.
販売名プロサウンド α６
ＡＬＯＫ 6-22-1Mure,Mitaka-shi,Tokyo,Japan
MADE IN JAPAN
ＡＬＯＫ
一般的名称汎用超音波画像診断装置
机器名超声波诊断仪
管理医療機器 /特定保守管理医療機器 MODEL Prosound α6
型号 Prosound α6
医療機器認証番号 221AABZX00123000
SN Ｍ０１２３４生产编号 M01234
製造番号 M01234 电源 200-240V～ 50/60Hz 900VA
定格電圧 100V 周波数 50/60 Hz 国食药监械（进） ****第*******号
POWER 100-120V～ 50／60 Hz
電源入力 900VA 产品标准编号 YZB/JAP ****-****
製造販売元アロカ株式会社 900 VA Aloka Co., Ltd. 东京都三鹰市牟礼 6-22-1
東京都三鷹市牟礼 6-22-1 生产国日本
P-12103 P-1210 P-127
P-12103 P-1210 P-127
[ ]
P-32112
P-52-NRTL-* For China P-3271
For A.A., Canada
23 A600346 P-12103
NOT AVAILABLE
24 A600273 P-1210
NOT AVAILABLE
25 A600347 P-127
NOT AVAILABLE
26 A600348 P-52-NRTL-*
NOT AVAILABLE
27 A600349 P-32112
NOT AVAILABLE
28 A600276 P-3271
NOT AVAILABLE
5 - 46
MN2-2048 Rev.0
11 LABEL S/N
* Canada only
Label on this page is NOT available as spare part
5 - 47
MN2-2048 Rev.0
11 LABEL S/N
* China only
Labels on this page is NOT available as spare parts
5 - 48
Revision History of the Service Manual
APPENDIX
MN2-2048 Rev.0
ProSound ALPHA6 Service Manual VOLUME 2 Revision History
1 Introduction
This is the revision history of this service manual.
2 Revision History of VOLUME 2
Revisions
Rev. Date Contents Pages Note
0 10-Nov-’09 1st. issue
1/2
MN2-2048 Rev.0
(Blank page)
2/2
ProSound α6 Service Manual Volume 2
Medical System Engineering Depertment

3-7-19 Imai, Ohme-shi, Tokyo 198-8577, Japan
www.aloka.com
MN2-2048 Rev.0

Service Manual: Prosound Α6

Uploaded by

Copyright:

Available Formats

Service Manual: Prosound Α6

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: Prosound Α6

Uploaded by

Copyright:

Available Formats

Ultrasound Diagnostic Instrument

ProSound ALPHA6 Service Manual VOLUME 1 Index

1-1 Service Manual ‥‥‥‥････････ 1-1

Chapter 2 Service Process

2-1 Repair work on the description of Service Manual‥‥‥‥‥‥‥‥ 2-1

ProSound ALPHA6 Disassemble Instruction ‥‥‥‥‥‥‥‥ 3-1

Details _13 ‥‥‥‥‥‥‥‥ 3-49

Chapter 4 System Overview

4-1 System Specification ‥‥‥‥‥‥‥‥ 4-1

Chapter 5 Trouble Shooting

5-1 Introduction ‥‥‥‥‥‥‥‥ 5-1

Chapter 6 Performance Check

6-1 Introduction ‥‥‥‥‥‥‥‥ 6-1

Check Sheet ‥‥‥‥‥‥‥‥ 6-18

VOLUME 1 Revision History ‥‥‥‥‥‥‥‥ 1/2

ProSound ALPHA6 Service Manual VOLUME 2 Index

Connection Diagram ‥‥‥‥‥‥‥‥ 2-1

Chapter 3 Service Information

3-1 Introduction ‥‥‥‥‥‥‥‥ 3-1

4-1 Introduction ‥‥‥‥‥‥‥‥ 4-1

Chapter 5 Parts list

5-1 Contents of Parts List ‥‥‥‥‥‥‥‥ 5-1

VOLUME 2 Revision History ‥‥‥‥‥‥‥‥ 1/2

CABLE 341 L-CABLE-844-11C2

3-2 Assignment of CTRL key and those usage

Command Input at Function

Back to factory default

Erase all patient data including

Erase all Preset data

Highlight items which have been

3-2-5 CTRL + S Preset List screen Enter Maintenance menu

See pages downward for command detail.

It is necessary to shutdown (reboot) the system after displaying this message

● Initialized (erased) data

Initial Configuration (For Export NTSC, Canada, AA)

Initial Configuration (For Export PAL, China)

● Initialized (erased) data

● Initialized (Erased) data

Initial Configuration (For Export NTSC, Canada, AA)

Initial Configuration (For Export PAL, China)

3-3 Maintenance menu

3-3-1. How to enter Maintenance menu

3-3-2. Function of Maintenance Menu –UP GRADE

1) User’s Data Back-Up

You can handle data by group stored in internal hard disk.

[Back-Up Data Save]

[Back-Up Data Restore]

※You may need to prepare external FD drive or USB memory.

※ You may need to prepare external FD drive or USB memory.

 Unpack downloaded file with suitable unpacking software.

 Confirm the following file exists in created folder.

o Press [Printer Installation] button at maintenance menu.

o Follow „Found New Hardware Wizard“

5-1 Contents of Parts List

POWER SUPPLY UNIT

MOUNTING RACK and FIXTURE LABEL

5-2 Appliance of Parts List

5-3 Outline of Parts List

9 For the surface of the equipment such as Cover and Connector

Unpack downloaded file with suitable unpacking software.

Confirm the following file exists in created folder.