Design of Pot Ptfe Bearing (Free Bearing) As Per Irc 83:2002 (Part 3)
Design of Pot Ptfe Bearing (Free Bearing) As Per Irc 83:2002 (Part 3)
MATERIAL PROPERTIES :-
Grade of steel (f y ) f e 340
Grade of concrete (f ck ) M 40
2
Modulus of elasticity of steel (Es) 200000 N/mm
3
Modulus of elasticity of concrete (Ec) 31622.78 N/mm
Bearing specification :-
213 mm
820 mm
Load summary :-
Ring
397mm
:. k 1 ,k 2 are constants
:. Me,d = 62570773x(1.49x0.00728+0.00825x0.00825)
MR,D = Induced moment resulting from resistance rotation due to friction = 0.2xCxH
Let , C = Perpend.r distance from the point of action of horiz. force to the axis of rotation in mm
C= 198.5 mm
H
:. MR,D= 0 N-mm
2
:. Design induced moment =1.3 x Mt,d = 21001057.78 N-mm
(As per IRC 83:2002 PART 3 CLAUSE 926.1.6)
Permissible stresses on adjacent concrete structure (As per IRC 83:2002 Part 3 Clause 926.2.1)
бcc (cal.) = 2
3.92 N/mm
Fig. Plan Of Pedestal
:.Stress is under permissible limit
1000mm
:. Sectional modulus of pedestal (z) = I
y 250mm
Fig.Section Of Pedestal
3
:. Moment of inertia (I) = bxd
12
:. I = 1302083333 mm4
:. y = 250/2 = 125mm
:. In case of direct and flexural compression stresses on the adjacent concrete structure
following criteria should be satisfied
cc(cal.) c(cal.) As per cluase IRC 83:2002 PART 3 CLAUSE 926.2.1.3
1
cc c
= 0.4 < 1
Hence OK
Permissible stresses in steel (As per IRC 83:2002 Part 3 Clause 926.2.2)
2
:. Permissible combined stress = 0.9 x f y = 306 N/mm
CHECK FOR ELASTOMERIC PAD (As per IRC 83:2002 Part 3 Clause 926.2.3)
= 4238570
0.785x397x397
= 34.3 N/mm2
2
:. Permissible average stress = 35 N/mm
(As per IRC 83:2002 (PART 3) CLAUSE 926.3.2.1)
:. a = 0.01x198.5
:. a = 1.4 mm 397mm
Fig. Deflection of elastomeric pad due to DL+SIDL
:. Deflection due to LL (b)
198.5mm
:. ϴ = 0.00825
b
:. b = 0.008x198.5
:. b = 1.64 mm
397mm
:. Total deflection = 1.45+1.64 Fig. Deflection of elastomeric pad due to L.L.
:. Total deflection = 3.08
CHECK FOR STRESS ON CONFINED PTFE (As per IRC 83:2002 Part 3 Clause 926.2.4)
CHECK FOR STRESSES ON CYLINDER (As per IRC 83:2002 Part 3 Clause 926.3.1)
:.Hoop tensile stress in the cross section of cylinder wall due to horizontal force is given by
:. Бat = H
2xbpxhc
bp di
hc