MUEHLSTEIN DE COLOMBIA S.A.

-
WORLD BUSINESSPORT CARRERA 69 NO.438-44 ORCINA 812
PSX: 4165619 FAX: 4 058550
BOGOTA - COLOMBIA
MUEHLSTEIN

Para: Sra. Maria MargaritaVarela De: Doris Correa

Fax: 6654336 Páginas: 3

Teléfono: 6654333 Fecha: Agosto 18/06

Asunto:

Urgente xx Para revisar Comentarios o Responder o Reciclar

Maria Margarita:

Te adjunto fichas técnicas de los materiales LLBF-122D y L5005, los cuales estamos próximos a
embarcarle.

Saludos.

DORIS CORREA
 -- ----- - -- -----

Alathon@

L 5005
HighDensityPolyethylene
HMWFilmGrade
MeltIndex0.057 Density0.949
Applicatlons
ALATHONL 5005is a highmolecularweighthighdensitycopolymerthatprovidesbroadbimodalmolecularweightdistribution,highstiffness
andgoodheatsealresponseandstrength.Typicalapplicationsineludemerehandisebags,grocerysaeks,trashcanliners,producebagsand
rollstock.

RegulatoryStatus
L 5005meetsthe requirements
polymer in
ot the FoodandDrugAdministration
.
regulation21CFR177.1520.Thisregulationallowsthe useot thisolefin
artieles or components ot artieles ¡ntendedtor use in contaet with tood. Specific limitations or conditions ot use may apply.
ContactyourEquistarsalesrepresentative
tor moreiniJrmation.

ProcessingTechnlques
Speeifiereeommendations
torproeessingL5005canonlybemadewhentheprocessing
eonditions,
equipment
andenduseareknown.For
furthersuggestions,
pleasecontaetyourEquistar
salesrepresentative.

PhysicalProperties
Nominal ASTMTest
Property Value Units Method
MeltIndex 0.057 g/10min D 1238
Density 0.949 g/cc D 1505
TotalEnergyDartDrop 2.05 ft.lbs/mil D 4272
ElmendorfTearStrength,MD(TD) 14 (35) 9 D 1922
TensileStrength@ Yield,MD(TD) 3,800(3,400) psi D882
TensileStrength@ Break,MD(TD) 8,500(5,000) psi D822
Elongation@ Break,MD(TD) 300(420) % D882
SeeantModulus,MD(TD) 115,000(140,000) psi D882

Typlcal ProcessConditlon Ranges:

BUR=3.5-4.5:1;
NeekHeight=6-9DieDiameters;DieGap(nominal),in.=0.040-0.050;
TowerHeight=Relatively
Short;Output,Lb/Hr/lnot Die
-
Cireumterence=10-12; Melt Temperature 390-420°F (199-216°C)

TIla information en Ihis document is, lo our knowIedge, true and acx:urate. However, since !he particula r uses and !he actual conditionsof use of our producls are beyond our
control, establishing satisfactory performance of our producls for!he intended application is !he cusIome(s soIe responsibRity. AlI uses of Equistar producls and any wrlten or oral
infonnalion, suggeslions or technical advice from Equistar are without wananty, express or inplied, and are no! an inducement lo use any process or product in confIict with any
patenl
Equistar materials are no! designed or manufactured for use in implantalion in !he human body or in contact with intema! body fluids or tissues. Equistar makes no representalion,
promise, express wananty or implied wananty conceming !he suitabRity of these materials for use in implantalion n !he human body or in contact with intemal body tissues or
fluids.
More detaRed safety and disposal nformation en our producls is contained in !he Material Safety Data Sheet (MSDS). AUusers of our producls are urged lo retain and use !he
MSDS. A MSDS is automaticaDy distributed upon purchaselorder execulion. You may request an advance or replacement copy by calling our MSDS HoUine at (800) 7~946

~quistar and Alalhon are registered trademar1<s of Equistar Chemicals, LP.

Equistar Chemicals, LP
1221 McKinney, Sutte 700
P.O. Box 2583
H~n, Texas77252.2583
(800) 615-8999
http://www.equistan:l1em.com EQUISTI\R
205310503
 Technical Data Sheet

LLBF-122D
Linear Low Density Polyethylene
LLBF-122D is a certified prime resin Butene-comonomer, speeial/y designed for produetion of high performance
Blown films far general purpose packaging. LLBF-122D features excel/entcombination of easy proeessabilitywith very
good film strength as wel/ as wide heat sealing temperaturerange. LLBF-122D major applieations inelude garment
bags, produce bags and liners. Maximum reeommended film drawdown is 0.5 mil. LLBF-122D eontains
medium slip and high antiblock. LLBF-122D complies with FDA regulation 21CFR 117.1520 (e) 3.1 (a) and with
most intemational regulations eoneemingthe use of Polyethylenein eontaetwith food artieles.

Typical Properties

PROPERTIES* ASTM UNIT NOMINAL

TEST ENGLlSH(METRIC) VALUES

RESIN
Melt Index D 1238E gr.l10 min 1.0
Density D 1505 gr.lcm3 0.922
FILM**

Haze D 1003 % 7.5

Gloss D 2457 @45° 65
Tensile Modulus 1 D882 psi x 1000 (MPa) 31/362 (215/250)
Yield D882 psi x 1000 (MPa) 1.8/1.72 (12/11)
Break D882 psi x 1000 (MPa) 6.5/4.32 (45/30)
Ult. Elongation D882 % 650/9902
Elmendorf Tear D 1922 gr. 80/5502
Dart Impact, F50 D 1709A gr. 85

TYPICAL VALUE OF PROPERTlESNOT TO BE CONSTRUEDAS SPECIFICATlONS.

.- Test specimens from compression molded plaque according to ASTM D 1928 Procedure C.
**- 1.0 mils (2511)film, melt temperature 39~30.F (200-220.C), blow-up-ratio 2.5 :1.
1 - 1% secant.
2 - MDrrD.
THIS PRODUCT DATA SHEET EFFECTlVE OCTOBER2003 SUPERSEDESALL DATA PREVlOUSLy PUBLlSHED
The technical information, suggesled uses and applications presented are made without charge and are believed to be reliable;
however, H. Muehlstein & Co., Inc. disclaims responsibilityfor results of use of this information. H. MUEHLSTEIN& CO. INC. MAKES
NO WARRANTIES, EITHER EXPRESS OR IMPLlED, CONCERNING OUR MATERIALS, INCLUDING ANY WARRANTIES OF
MERCHANTABILlTY OR FITNESS FOR A PARTICULAR USE. H. Muehlstein & Co. expressly disclaims any statements or
suggestions as being inducement. AlI users should rely upon their own test in determining suitability.

~
~
MUEHLSTEIN
The Global Leader in Polymer Distribution
..w.: ChanneI
~..' Pri.me 11-. pegasus
:¡a~ ADaance 1.'1 Polymers
WorldHeadquarters:800ConnecticutAvenue,Norwalk,CT USA06854-1631
Phone: (203)855-6000 Fax: (203)855-6222 E-mail:webmasterHM@muehlstein.com
 **************************
***** REP. ACTIVIDt\D *****
**************************

TRANSMISION OK

# TXiRX 0321
TEL CONEXION 6654336
ID CONEXION
HORA INICIO 08i18 13:45
T USADO 03'02
PAG. 3
RESULTADO OK