Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Aluminium / Aluminum Bronze UNS C64200 - Copper Alloy: Topics Covered

    Uploaded by

    akram
    UNS C64200 is an aluminum bronze alloy containing 5-12% aluminum. It has excellent corrosion resistance due to a protective alumina film. It has a golden color and is stronger than typical brasses or tin bronzes. It has good mechanical properties and machinability, and is commonly used for valve and pump components, marine equipment, and fasteners due to its strength and corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aluminium / Aluminum Bronze UNS C64200 - Copper Alloy: Topics Covered

    Uploaded by

    akram
    53 views3 pages
    UNS C64200 is an aluminum bronze alloy containing 5-12% aluminum. It has excellent corrosion resistance due to a protective alumina film. It has a golden color and is stronger than typical brasses or tin bronzes. It has good mechanical properties and machinability, and is commonly used for valve and pump components, marine equipment, and fasteners due to its strength and corrosion resistance.

    Original Title

    Aluminium-Aluminum-Bronze-UNS-C64200-e28093-Copper-Alloy

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    UNS C64200 is an aluminum bronze alloy containing 5-12% aluminum. It has excellent corrosion resistance due to a protective alumina film. It has a golden color and is stronger than typical brasses or tin bronzes. It has good mechanical properties and machinability, and is commonly used for valve and pump components, marine equipment, and fasteners due to its strength and corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views3 pages

    Aluminium / Aluminum Bronze UNS C64200 - Copper Alloy: Topics Covered

    Uploaded by

    akram
    UNS C64200 is an aluminum bronze alloy containing 5-12% aluminum. It has excellent corrosion resistance due to a protective alumina film. It has a golden color and is stronger than typical brasses or tin bronzes. It has good mechanical properties and machinability, and is commonly used for valve and pump components, marine equipment, and fasteners due to its strength and corrosion resistance.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Aluminium / Aluminum Bronze UNS C64200 – Copper Alloy

    Aluminium / Aluminum Bronze UNS C64200 –
    Copper Alloy
    Written by AZoM Sep 26 2012

    Topics Covered
    Introduction
    Chemical Composition
    Physical Properties
    Mechanical Properties
    Other Designations
    Fabrication and Heat Treatment
    Machinability
    Welding
    Forging
    Hot Working
    Cold Working
    Annealing
    Applications

    Introduction
    UNS C64200 aluminium / aluminum bronze is a copper alloy with a combination of 5 –
    12%. In addition to aluminium, iron, nickel, manganese and silicon in cast and wrought
    form are present in the alloy.

    A hard, adherent, protective alumina film present in this alloy makes the alloy better
    resistant to corrosion and stronger than typical brasses and tin bronzes. UNS C64200
    comes in an attractive golden color which does not tarnish much with time.

    Chemical Composition
    The following table shows the chemical composition of UNS C64200 copper alloys.

    Element Content (%)
    Cu 91.2
    Al 7.0

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6304
    1
    /3
    Aluminium / Aluminum Bronze UNS C64200 – Copper Alloy

    Physical Properties
    The following table gives the physical properties of UNS C64200 copper alloys.

    Properties Metric Imperial


    Density 8.8­8.94(g/cm3) 0.32(lb/in3)
    Melting point 982°C 1800°F

    Mechanical Properties
    The mechanical properties of UNS C64200 copper alloys are tabulated below.

    Properties Metric Imperial


    Poisson's ratio 0.34 0.34
    Elastic modulus 16000 GPa 16969 ksi

    Other Designations
    Other designations that are equivalent to UNS C64200 copper alloys include:

    UNS C64200
    ASME SB150
    ASME SB283
    ASTM B124
    ASTM B150
    ASTM B283
    ASTM F467
    ASTM F468
    SAE J461
    SAE J463

    Fabrication and Heat Treatment

    Machinability
    The machinability rating of UNS C64200 alloy is 60%.

    Welding
    The following are the recommendations of UNS C64200 welding:

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6304
    2
    /3
    Aluminium / Aluminum Bronze UNS C64200 – Copper Alloy

    Soldering ­ not recommended
    Brazing ­ fair
    Oxyacetylene welding ­ not recommended
    Gas shielded arc welding is rated – fair
    Coated metal arc welding is rated – fair
    Spot welding is rated – fair
    Seam welding is rated – fair
    Butt welding is rated ­fair

    Forging
    The hot forgeability rating of UNS C64200 is 80%. The hot working temperature for this
    alloy is between 1300 and 1600ºF.

    Hot Working
    UNS C64200 copper alloys have excellent hot working property.

    Cold Working
    UNS C64200 copper alloys have poor cold working property.

    Annealing
    Annealing of UNS C64200 is performed between 1100 and 1300ºF.

    Applications
    The following are the major applications of UNS C64200 copper alloys:

    Valve and pump components for industrial process streams
    Marine equipment
    High strength fasteners
    Pole line hardware

    P
    Saved from URL: https://www.azom.com/article.aspx?ArticleID=6304
    3
    /3

    You might also like