English / Metric Units: Halliburton Technical Data

Back to Main Menu
Page 1
ENGLISH / METRIC UNITS
SECTION 240
HALLIBURTON
TECHNICAL DATA
CALCULATIONS,
FORMULAE
AND
SLURRY TABLES
Copyright © 1985 , 1999, 2001

HaIliburton Company
ALL RIGHTS RESERVED

Page 2
ENGLISH/METRIC UNITS
SECTION 240
TABLE OF CONTENTS
Lengths, Areas, and Volumes ................................ 4
Geometrical Relationships ...................................... 5
Weights and Measures .......................................... 6
TVD from MD for Deviated Wells ........................... 7
Cosine Table ........................................................... 8
Horizontal Tanks ..................................................... 9
Pipe Capacity .......................................................... 10, 11
Volume and Height .................................................. 10, 11
Balanced Plugs ....................................................... 12
Displacement .......................................................... 13
Buoyancy ............................................................... 13
Stretch Data for Drill Pipe, Tubing, and Casing ...... 14, 15
Slack-Off Data for Tubing and Drill Pipe ................ 16
Effect of Temperature on Steel .............................. 17
Hydrostatic Pressure ............................................. 18
Hydrostatic Pressure and Fluid Weight ................. 19-21
Effect of Water on Mud Weight .............................. 22
Mud Weight Adjustment with Barite or Water ........ 23
Velocity & Hydraulic Horsepower ......................... 24, 25
Absolute Volume Factors for Materials in Solution 26
Slurry Density, Water Requirements,
and Yield Calculations ....................................... 27, 28
Slurry Tables ........................................................... 29-52
Flow Calculations ................................................... 53, 54
Table for Sand Plugs .............................................. 55-56
Page 3
TABLE OF CONTENTS
(continued)
Depth Conversion Table ......................................... 57

Volume Conversion Table ....................................... 58
Compressive Strength Conversion Table .............. 59
Temperature Conversion Table .............................. 60-62
Conversion Percent Salt ........................................ 63
Physical Properties
of Sodium Chloride Solutions ............................ 64
of Calcium Chloride Solutions ............................ 65
of Potassium Chloride Solutions ....................... 66
API Gravity Conversion Table ................................ 67
API Gravity of Oil .................................................... 68
Metric Conversion Factors ..................................... 69
Classified List of Units ............................................ 70-84
Conversion Constants ............................................ 85
Conversion Charts ................................................. 86-90
Page 4
USEFUL DATA TO CALCULATE

LENGTHS, AREAS AND VOLUMES
1. Linear Measurements (Length):
To find the circumference of a circle multiply the diameter by

3.1416.
To find the diameter of a circle divide the circumference by

3.1416.
The radius of a circle is one-half the diameter.
2. Square Measurement (Area):
To find the area of a square multiply the length by the width.
To find the area of a ractangle multiply the length by the

width.
To find the area of a circle multiply one-half the diameter

by one-half the diameter and multiply the answer by
3.1416, or diameter x diameter x .7854.
To find the vertical surface area of a cylinder standing on

its end multiply the circumference by its vertical height.
To find the surface area of a sphere multiply the circumfer-

ence by the diameter.
3. Cubic Measurement (Volume, capacity and displacement):
To find the volume of a cube or ractangular solid multiply the

length by the height and multiply the answer by the width.
To find the volume, capacity or displacement of a square or

ractangular tank multiply the length by the height, then
multiply the answer by the width.
To find the volume, capacity or displacement of a cylinder

multiply the area of its end by its height.
To find the volume, capacity or displacement of a sphere or

spherical tank multiply one-half of its diameter by the surface
area and divide the answer by three.
Page 5
GEOMETRICAL RELATIONSHIPS
CIRCLE: SPHERE:
AREA = 0.7854 x D2
SURFACE AREA = 3.14 x D2

ELLIPSE:
CUBE:
AREA = 0.7854 x A x B
RECTANGULAR
PARALLELOPIPED:
(ALL SIDES EQUAL)
SURFACE AREA = 6 x A2
CONE:
SURFACE
AREA = 2 x (AB + BC + CA)
CYLINDER:
SURFACE AREA = 1.57 x D x 5
3.14 x D2 x H
VOLUME =
1. HOLLOW 12
SURFACE AREA = 3.14 x D x A
VOLUME = D2 x A x .7854
2. SOLID
SURFACE
AREA = 3.14 x D x A + 1.57 x D2
VOLUME = D2 x A x .7854
HEXAGON:
AREA = 3/2 x A x B
FRUSTRUM
OF CONE:
TRAPEZOID:
SURFACE
AREA = 1.57 x (D+d) x 5 AREA = ½ x (A + B) X H
Page 6
WEIGHTS AND MEASURES
1 U.S. gal equals ........................... { 231 Cu. In. 3785.4 cm3.

0.1337 Cu. Ft. .00379 m3.
0.0238 bbls. 3.785 L.
1 U.S. gal. water at 20ºC. (68ºF.) weighs 8.33 Lbs. 3.778 kg.
1 Imperial or English gal. equals ... 277.420 Cu. In. 4.54596 L.
1 Imperial gal. of water weighs ...... 10 Lbs. 4.535924 kg.
1 Square Foot equals .................... 144 square In. .092903 m2.
1 Cubic Inch equals ......................
{ .0043291 Gals. .016387 L.
.0005787 Cu. Ft. .000016 m3.
{
1728 Cu. In..02832.4 cm3.
1 Cubic Foot equals ...................... 7.4805 U.S. Gal.28.32 L.
0.1781 bbls.28.32 L.
1 cu. ft. water at 20ºC. (68ºF.) weighs . 62.31 Lbs.28.263341 kg.
1 cu. ft. salt water(4.6%) weighs .......... 64.3 Lbs.29.165989 kg.
1 cu. ft. Saturated Salt Water weighs .. 74.7 Lbs.33.8335 kg.
1 Standard Barrel equals ...................... 31.5 U.S. Gals.119.2379 L.
{
42 Gals.158.98386 L.
1 Barrel of Oil equals ........................ 9702 Cu. In.158987.6 cm3.
5.6146 Cu. Ft..159 m3.
1 cu. in. of water weighs .................. .03606 Lbs..01636 kg.
12 cu. in. of water weighs ................ .433 Lbs..1964 kg.
A pressure of one lb. per sq. in. is exerted by a column of water 2.3110 feet high, or
27.73 inches high, at 20ºC. (68ºF.).
A pressure of 1 kPa is exerted by a column of water .102 meters high at 20ºC.
A column of water, at 20ºC (68ºF.) one foot high presses on the base with a force of
.433 lbs. per square inch.
A column of water, at 20ºC (68ºF.) one foot high presses on the base with a force of
9.807 kPa.
To find the pressure in lbs. per sq. in. of a column of water multiply the height of the
column in feet by .433.
To find the pressure in kPa of a column of water multiply the height of the column in
meters by 9.807.
To find the capacity of a mud pit per inch (mm) of depth multiply the length by the width
in feet (m), which gives the area in square feet (m2), then multiply by the depth in feet
(m), which gives total capacity of pit in Cu.Ft. (m3). Now divide the depth in inches (mm)
to get Cu. Ft. per In. (m3) of depth. If it is desired to convert the cubic feet (m3/mm) into
gallons (L) multiply by 7.48 (1000).
Doubling the inside diameter of a pipe increases its capacity four times.
Friction of liquids in pipe increases as the square of the velocity.
A horsepower is equivalent to raising 33,000 Lbs. 1 foot per minute, or 745.6999 W.
Steam rising from water at its boiling point has a pressure of 14.7 psi (101.34 kPa) at
sea level.
Page 7
DEVIATED WELL CALCULATIONS
The cosine is the ratio of the True Vertical Depth (TVD)

compared to the Measured Depth (MD). For example
the Cosine (COS) of a 45 degree angle is 0.7071. This
means for every foot of mesured depth the true vertical
depth is only 0.7071 feet.
45°
0.7071 feet 1 foot
Example:
A well is deviated from the surface at a 30 degree angle.
The MD is 800 feet. If the well is loaded with 11.4 lb/gal
drilling fluid what is the hydrostatic pressure at the
TD?
COS 30 = 0.8660
800 ft x 0.8660 x 0.5922 psi/ft = 410.2762 psi

Page 8
DEVIATED WELL CALCULATIONS
COSINE TABLE
Degree Cosine Degree Cosine Degree Cosine
1 0.9998 31 0.8572 61 0.4848
2 0.9994 32 0.8480 62 0.4695
3 0.9986 33 0.8387 63 0.4540
4 0.9976 34 0.8290 64 0.4384
5 0.9962 35 0.8192 65 0.4226
6 0.9945 36 0.8090 66 0.4067
7 0.9925 37 0.7986 67 0.3907
8 0.9903 38 0.7880 68 0.3746
9 0.9877 39 0.7771 69 0.3584
10 0.9848 40 0.7660 70 0.3420
11 0.9816 41 0.7547 71 0.3256
12 0.9781 42 0.7431 72 0.3090
13 0.9744 43 0.7314 73 0.2924
14 0.9703 44 0.7193 74 0.2756
15 0.9659 45 0.7071 75 0.2588
16 0.9613 46 0.6947 76 0.2419
17 0.9563 47 0.6820 77 0.2250
18 0.9511 48 0.6691 78 0.2079
19 0.9455 49 0.6561 79 0.1908
20 0.9397 50 0.6428 80 0.1736
21 0.9336 51 0.6293 81 0.1564
22 0.9272 52 0.6157 82 0.1392
23 0.9205 53 0.6018 83 0.1219
24 0.9135 54 0.5878 84 0.1045
25 0.9063 55 0.5736 85 0.0872
26 0.8988 56 0.5592 86 0.0698
27 0.8910 57 0.5446 87 0.0523
28 0.8829 58 0.5299 88 0.0349
29 0.8746 59 0.5150 89 0.0175
30 0.8660 60 0.5000 90 0.0000
Page 9
ENGLISH UNITS
CALCULATING CONTENTS OF
HORIZONTAL CYLINDRICAL TANKS
First calculate the depth ratio (D) by dividing the depth of
water or other fluid in the tank in inches (h) by the diameter
of the tank in inches (d).
Opposite this value for the depth ratio (D) in the following
table you will find the percentage of the total capacity of the
tank. Multiplying the capacity of the tank by this percentage
gives the contents of the tank for that fluid depth.
Percent of Percent of Percent of

D Capacity D Capacity D Capacity
.02 .004799 .34 .299762 .66 .700238
.04 .013480 .36 .324061 .68 .724271
.06 .024509 .38 .348667 .70 .747702
.08 .037501 .40 .373539 .72 .770805
.10 .052025 .42 .398525 .74 .79348
.12 .067979 .44 .423749 .76 .815334
.14 .085114 .46 .449132 .78 .836923
.16 .103234 .48 .464560 .80 .857654
.18 .122421 .50 .500000 .82 .877579
.20 .14346 .52 .525440 .84 .896766
.22 .163077 .54 .550868 .86 .914886
.24 .184466 .56 .576251 .88 .932021
.26 .206502 .58 .601475 .90 .947975
.28 .229195 .60 .626461 .92 .962499
.30 .252298 .62 .651333 .94 .975491
.32 .275729 .64 .675939 .96 .986520
.98 .995201
Example: Find contents of tank 60 in
diameter (d) which has 24 of water in it.
Tank is 10 feet long. (Capacity of tank is
1469 gal.)
24
D= = .40 and from table, the
60
h percent of capacity is .373539.
D=
d Contents = 1469 x .373539 = 550.62 gal.
Courtesy of Missouri Water Well & Pump Contractors Assn., Inc.

Page 10
ENGLISH UNITS
EQUATIONS FOR CALCULATING

CAPACITY OF PIPE
Barrels per lineal foot = .0009714 x D2

1029.4
Lineal feet per barrel =
D2
Cubic feet per lineal foot = .005454 x D2
183.35
Lineal feet per cubic foot = D2
Gallons per lineal foot = .0408 x D2
24.51
Lineal feet per gallon = D2
D = Diameter in inches
EQUATIONS FOR VOLUME AND HEIGHT

BETWEEN MULTIPLE TUBING STRINGS
AND HOLE (OR CASING)
Barrels per lineal foot = (D2 nd2) 0.0009714
1029.4
Lineal feet per barrel = D2 nd2
Cubic feet per lineal foot = (D2 nd2) 0.005454
183.35
Lineal feet per cubic foot = D2 nd2
Gallons per lineal foot = (D2 nd2) 0.0408
24.51
Lineal feet per gallon = D2 nd2
WHERE:
D= Diameter of hole, inches (or ID of casing)
d = Outside diameter of tubing, inches
n = Number of tubing strings
Page 11
METRIC UNITS
CAPACITY OF PIPE
D2
Cubic meters per lineal meter =
1,273,000
1,273,000
Lineal meters per cubic meter =
D2
D2
Hectoliter per lineal meter =
127,300
127,300
Lineal meter per hectoliter =
D2
D2
Liter per Lineal meter =
1273
1273
Lineal meter per liter =
D2
D = Diameter in mm
EQUATIONS FOR VOLUME AND HEIGHT

BETWEEN MULTIPLE TUBING STRINGS AND
HOLE (OR CASING)
(D2 nd2)
Cubic meter per meter = 1,273,000
1,273,000
Meter per cubic meter = (D2 nd2)
(D2 nd2)
Hectoliter per meter = 127,300
127,300
Meter per hectoliter = (D2 nd2)
(D2 nd2)
Liter per meter = 1273
1273
Meter per liter = (D2 nd2)
WHERE:
D = Diameter of hole or ID of casing, mm
d = Outside diameter of tubing, mm
n = Number of tubing strings
Page 12
ENGLISH UNITS
BALANCE CEMENT PLUG JOB

It is desired to place a 110 Cu. Ft. cement plug in the bottom of 8,000
of 7, 26# casing, using 2.875 tubing. The operator wants the cement
column equalized. He also wants a balanced column of water (the same
height of water in the space between the tubing and casing as exists
within the tubing).
EQUALIZATION POINT FORMULA

N
h= - where
C+T
N = Cu. Ft. of Cement slurry used.

h = height of balanced cement column.
C = Cu. Ft. per linear foot of space between tubing (or drill pipe), and
casing (or hole). C may be found in Volume and Height Tables,
Section 221 and/or Section 122.
T = Cu. Ft. per linear foot inside tubing (or drill pipe, or casing). T may
be found in Capacity Tables, Section 210.
N = 110 Cu. Ft. Cem. slurry: C = .1697 Cu. Ft./Ft.
T = .0325 Cu. Ft./Ft.
110 110
h = = = 544
.1697 + .0325 .2022
8000 - 544 = 7456 x .00579 Bbls./Ft. (Capacity Tables) = 43.17 Bbls.
displacement required to equalize the cement column.
To balance the water that is to be placed ahead of the cement with the
water that is to follow the cement, one must obtain (from the Handbook)
the height that one Bbl. of water will fill in the space between the casing
and the tubing, and the height that one Bbl. of water will fill inside the
tubing.
Height between tubing and casing = 33.11/Bbl. (Handbook).
Height inside tubing = 172.7/Bbl. (Handbook).
(172.6)
A ratio of 5.22 Bbl. of water ahead of the cement to one
33.11
bbl. of water behind will give a balanced column of 172.7 of water. This
ratio may be used to balance any desired amount of water the operator
wants to use. 2 Bbls. of water behind the cement - 2 x 5.22 = 10.44 Bbls.
of water ahead of the cement. This gives a balanced water column of
345.4.
Page 13
ENGLISH UNITS
DISPLACEMENT
BUOYANCY FACTORS FOR STEEL PIPE
IN VARIOUS WEIGHT FLUIDS
(Fluid Density lb./gal.)
Buoyancy Buoyancy Buoyancy
Lb./Gal. Factor Lb./Gal. Factor Lb./Gal. Factor
6.0 .9083 11.0 .8319 16.0 .7555

6.1 .9068 11.1 .8304 16.1 .7540
6.2 .9053 11.2 .8289 16.2 .7524
6.3 .9037 11.3 .8273 16.3 .7509
6.4 .9022 11.4 .8258 16.4 .7494
6.5 .9007 11.5 .8243 16.5 .7479
6.6 .8991 11.6 .8227 16.6 .7463
6.7 .8976 11.7 .8212 16.7 .7448
6.8 .8961 11.8 .8197 16.8 .7433
6.9 .8946 11.9 .8182 16.9 .7417
7.0 .8930 12.0 .8166 17.0 .7402

7.1 .8915 12.1 .8151 17.1 .7387
7.2 .8900 12.2 .8136 17.2 .7372
7.3 .8884 12.3 .8120 17.3 .7356
7.4 .8869 12.4 .8105 17.4 .7341
7.5 .8854 12.5 .8090 17.5 .7326
7.6 .8839 12.6 .8075 17.6 .7311
7.7 .8823 12.7 .8059 17.7 .7295
7.8 .8808 12.8 .8044 17.8 .7280
7.9 .8793 12.9 .8029 17.9 .7265
8.0 .8778 13.0 .8013 18.0 .7249

8.1 .8762 13.1 .7998 18.1 .7234
8.2 .8747 13.2 .7983 18.2 .7219
8.3 .8732 13.3 .7968 18.3 .7204
8.33* .8727 13.4 .7952 18.4 .7188
8.4 .8716 13.5 .7937 18.5 .7173
8.5 .8701 13.6 .7922 18.6 .7158
8.6 .8686 13.7 .7906 18.7 .7142
8.7 .8671 13.8 .7891 18.8 .7127
8.8 .8655 13.9 .7876 18.9 .7112
8.9 .8640
14 .7861 19 .7097
9.0 .8625 14.1 .7845 19.1 .7081
9.1 .8609 14.2 .783 19.2 .7066
9.2 .8594 14.3 .7815 19.3 .7051
9.3 .8579 14.4 .7800 19.4 .7035
9.4 .8564 14.5 .7784 19.5 .7020
9.5 .8548 14.6 .7769 19.6 .7005
9.6 .8533 14.7 .7754 19.7 .6990
9.7 .8518 14.8 .7738 19.8 .6974
9.8 .8502 14.9 .7723 19.9 .6960
9.9 .8487
15.0 .7708 20.0 .6944
10.0 .8472 15.1 .7693
10.1 .8457 15.2 .7677
10.2 .8441 15.3 .7662
10.3 .8426 15.4 .7647
10.4 .8411 15.5 .7631
10.5 .8395 15.6 .7616
10.6 .8380 15.7 .7601
10.7 .8365 15.8 .7586
10.8 .8350 15.9 .7570
10.9 .8334
FOR OPEN ENDED PIPE
Pipe Wt. (in Fluid) = Pipe Wt. (In Air) x Buoyancy Factor
*Weight of Water at 68°F (20°C)
Page 14
TABLE 204
STRETCH DATA FOR DRILL PIPE,

TUBING AND CASING
Stretch Per Pull Above Stretch
Length 1000 Lb. Weight of Due To Own
Size of of Pipe Pull Above Pipe Per Weight
Tubing, D.P. Suspended Wt. of Pipe, In. Stretch Suspended
or Casing in Well, Inches of Pipe in Water,
Feet Factor C Pounds Inches
500 .115 6,450 .14
2.375 1,000 .310 3,225 .56
2,000 .620 1,612 2.22
Upset
3,000 .930 1,075 5.00
Tubing
4.70 #/Ft. 4,000 1.240 806 8.88
5,000 1.550 644 13.88
10,000 3.100 322 55.51
500 .110 9,080 .14
1,000 .220 4,540 .56
2.875 2,000 .440 2,270 2.22
Upset 3,000 .660 1,513 5.00
Tubing
4,000 .880 1,135 8.88
6.50 #/Ft.
5,000 1.100 908 13.88
10,000 2.200 454 55.51
500 .0772 12,960 .14
1,000 .1544 6,480 .56
3.500 2,000 .3088 3,240 2.22
Upset 3,000 .4632 2,160 5.00
Tubing
9.30 #/Ft. 4,000 .6176 1,620 8.88
5,000 .7720 1,296 13.88
10,000 1.544 648 55.51
500 .070 14,300 .14
1,000 .140 7,150 .56
2.875 2,000 .280 3,575 2.22
Drill Pipe 3,000 .420 2,383 5.00
10.40 #/Ft. 4,000 .560 1,787 8.88
5,000 .700 1,430 13.88
10,000 1.40 715 55.51
FORMULA FOR DETERMINING STRETCH IN PIPE

L X P X C
S=
1000 X 1000
(use to set tension packer with no weight indication)
FORMULA FOR DETERMINING PULL OF PIPE

1000 X 1000 X S
P=
C X L
FORMULA FOR FREE PIPE DEPTH

S X 1000 X 1000
L=
P X C
Where: L = Length of free pipe in feet.

S = Stretch pulled in pipe, in inches.
P = Pull on pipe to get the stretch S in pounds
C = Constant for given pipe size and weight being stretched.
(For this equation use C factor at pipe length of 1000 ft.)
Page 15
TABLE 204
STRETCH DATA FOR DRILL PIPE,

TUBING AND CASING
Stretch Per Pull Above Stretch
Length 1000 Lb. Weight of Due To Own
Size of of Pipe Pull Above Pipe Per Weight
Tubing, D.P. Suspended Wt. of Pipe, In. Stretch Suspended
or Casing in Well, Inches of Pipe in Water,
Feet Factor C Pounds Inches
500 .055 18,200 .14
3.500 1,000 .110 9,100 .56
2,000 .220 4,550 2.22
Drill Pipe
3,000 .330 3,033 5.00
13.30 #/Ft.
4,000 .440 2,275 8.88
5,000 .550 1,820 13.88
10,000 1.10 910 55.51
500 .0450 22,200 .14
1,000 .0900 11,100 .56
4.500 2,000 .180 5,550 2.22
Drill Pipe 3,000 .270 3,700 5.00
16.60 #/Ft.
4,000 .360 2,775 8.88
5,000 .450 2,220 13.88
10,000 .900 1,110 55.51
500 .0402 24,800 .14
1,000 .0804 12,400 .56
5.500 2,000 .160 6,230 2.22
Casing 3,000 240 4,133 5.00
17 #/Ft.
4,000 .320 3,100 8.88
5,000 .402 2,480 13.88
10,000 804 1,240 55.51
500 .0301 33,220 .14
1,000 .0602 16,610 .56
7.000 2,000 .120 8,305 2.22
Casing 3,000 .181 5,537 5.00
23 #/Ft. 4,000 241 4,152 8.88
5,000 .301 3,322 13.88
10,000 .602 1,661 55.51
NOTE: The above figures apply only to steel pipe that has not been stretched or is
not being stretched beyond its elastic limit.
Example:
A 7 RTTS is set at 15,000 feet on 2 3/8: 4.7 #/ft. EUE tubing. There are
indications that the casing has collapsed above the tool. Pick up pipe weight,
mark pipe and pull 20,000 pounds above pipe weight. This 20,000 pounds
stretches pipe 25 inches. Where is the casing collapsed?
S = 25 inches
P = 20,000 pounds
C = .31 (C factor from table at 1000 ft.)
25 X 1000 X 1000
L=
20,000 X .31
L = 4032 feet
Page 16
TABLE 205
SLACK-OFF DATA FOR TUBING

AND DRILL PIPE
Size of Tubing or Drill Pipe Slack-Off Factor*
1.900 O.D. EUE Tubing 0.68

2.875 O.D. 10.40 lb/ft DP 0.16
3.500 O.D. 13.30 lb/ft DP 0.12
4.500 O.D. 16.60 lb/ft DP 0.10
* Inches to slack-off to obtain 1000 lbs. weight on packer for each 1000 ft. of depth.
An allowance is included for coiling and friction.
Desired Weight Packer Depth

Required slack (inc.) = X X Factor
1000 1000
Example:
Weight desired on packer ......................................... 15,000 lbs.
Depth packer set ............................................................. 5,000:
Size of Tubing ........................................................ 2.375 EUE
Slack-off factor for 2.375 EUE from table = 0.39
15,000 5,000
X X 0.39 = 29.25 (use 29 inches)
1000 1000
The setting stroke required to set any particular tool is not included in these figures
and will have to be added.
NOTE: The above figures apply only to pipe that has not been stretched, or is not
being stretched beyond its elastic limit.
Page 17
ENGLISH UNITS
EFFECT OF TEMPERATURE ON STEEL
Steel expands or contracts .0000828 per foot per degree (F)

of temperature change.
Therefore:
e
T = depth x .0000828 x ∆T (F°)
when:
T
e
= change in length in inches
depth = feet
∆T = average temperature change
Page 18
HYDROSTATIC PRESSURE AND FLUID

WEIGHT CONVERSION TABLES
To find the Hydrostatic pressure of a column of fluid, multiply the
appropriate value in Lbs./Sq. in. per foot of depth times the depth in feet.
Example: find the Hydrostatic Pressure at a depth of 13,760 feet (4
194m) in a hole filled with mud weighing 12.3 Lbs./Gal. (92.01 Lbs./Cu.
Ft.) (1.474 kg/L) The value 0.6390 is found opposite 12.3 Lbs./Gal. in the
table. Then 0.6390 x 13760 = 8793 Lbs. per Sq. In. (or 14.455 kPa/mX 4
194m = 60 624 kPa) hydrostatic pressure.
HYDROSTATIC PRESSURE AND FLUID WEIGHT

Lbs./Sq. In.
Lbs./Gal. Lbs./Cu. Ft. Sp. Gr. Per Ft. of Depth kg/L kPa/m
7.0 52.36 0.84 0.3636 0.839 8.225
7.1 53.11 0.85 0.3688 0.851 8.342
7.2 53.86 0.86 0.3740 0.863 8.460
7.3 54.61 0.87 0.3792 0.875 8.578
7.4 55.36 0.89 0.3844 0.887 8.695
7.5 56.10 0.90 0.3896 0.899 8.813
7.6 56.85 0.91 0.3948 0.911 8.931
7.7 57.60 0.92 0.4000 0.923 9.048
7.8 58.35 0.93 0.4052 0.935 9.166
7.9 59.10 0.95 0.4104 0.947 9.283
8.0 59.84 0.96 0.4156 0.959 9.401
8.1 60.59 0.97 0.4208 0.971 9.519
8.2 61.34 0.98 0.4260 0.983 9.636
8.3 62.09 0.99 0.4312 0.995 9.754
8.33* 62.31 1.00 0.4330 1.000 9.807
8.4 62.84 1.01 0.4364 1.007 9.872
8.5 63.58 1.02 0.4416 1.019 9.989
8.6 64.33 1.03 0.4468 1.031 10.107
8.7 65.08 1.04 0.4519 1.043 10.222
8.8 65.83 1.05 0.4571 1.054 10.340
8.9 66.58 1.07 0.4623 1.066 10.457
9.0 67.32 1.08 0.4675 1.078 10.575
9.1 68.07 1.09 0.4727 1.090 10.693
9.2 68.82 1.10 0.4779 1.102 10.810
9.3 69.57 1.11 0.4831 1.114 10.928
9.4 70.32 1.13 0.4883 1.126 11.046
9.5 71.06 1.14 0.4935 1.138 11.163
9.6 71.81 1.15 0.4987 1.150 11.281
9.7 72.56 1.16 0.5039 1.162 11.399
9.8 73.31 1.17 0.5091 1.174 11.516
9.9 74.06 1.19 0.5143 1.186 11.634
10.0 74.80 1.20 0.5195 1.198 11.751
10.1 75.55 1.21 0.5247 1.210 11.869
10.2 76.30 1.22 0.5299 1.222 11.987
10.3 77.05 1.23 0.5351 1.234 12.104
10.4 77.80 1.25 0.5403 1.246 12.222
* Density of water at 20ºC.or 68ºF.

Page 19
HYDROSTATIC PRESSURE
AND FLUID WEIGHT
Lbs./Sq. In.
10.5 78.55 1.26 0.5455 1.258 12.340

10.6 79.29 1.27 0.5506 1.270 12.455
10.7 80.04 1.28 0.5558 1.282 12.573
10.8 80.79 1.29 0.5610 1.294 12.690
10.9 81.54 1.31 0.5662 1.306 12.808
11.0 82.29 1.32 0.5714 1.318 12.925
11.1 83.03 1.33 0.5766 1.330 13.043
11.2 83.78 1.34 0.5818 1.342 13.161
11.3 84.53 1.35 0.5870 1.354 13.278
11.4 85.28 1.37 0.5922 1.366 13.396
11.5 86.03 1.38 0.5974 1.378 13.514
11.6 86.77 1.39 0.6026 1.390 13.631
11.7 87.52 1.40 0.6078 1.402 13.749
11.8 88.27 1.412 0.6130 1.414 13.866
11.9 89.02 1.43 0.6182 1.426 13.984
12.0 89.77 1.44 0.6234 1.438 14.102
12.1 90.51 1.45 0.6286 1.450 14.219
12.2 91.26 1.46 0.6338 1.462 14.337
12.3 92.01 1.47 0.6390 1.474 14.455
12.4 92.76 1.49 0.6442 1.486 14.572
12.5 93.51 1.50 0.6493 1.498 14.688
12.6 94.25 1.51 0.6545 1.510 14.805
12.7 95.00 1.52 0.6597 1.522 14.923
12.8 95.75 1.53 0.6649 1.534 15.040
12.9 96.50 1.55 0.6701 1.546 15.158
13.0 97.25 1.56 0.6753 1.558 15.276
13.1 97.99 1.57 0.6805 1.570 15.393
13.2 98.74 1.58 0.6857 1.582 15.511
13.3 99.49 1.59 0.6909 1.594 15.629
13.4 100.24 1.61 0.6961 1.606 15.746
13.5 100.99 1.62 0.7013 1.618 15.864
13.6 101.73 1.63 0.7065 1.630 15.981
13.7 102.48 1.64 0.7117 1.624 16.099
13.8 103.23 1.65 0.7169 1.654 16.217
13.9 103.98 1.67 0.7221 1.666 16.334
14.0 104.73 1.68 0.7273 1.678 16.452
14.1 105.48 1.69 0.7325 1.690 16.570
14.2 106.22 1.70 0.7377 1.702 16.687
14.3 106.97 1.71 0.7429 1.714 16.805
14.4 107.72 1.73 0.7480 1.726 16.920
14.5 108.47 1.74 0.7532 1.738 17.038
14.6 109.22 1.75 0.7584 1.750 17.155
14.7 109.96 1.76 0.7636 1.761 17.273
14.8 110.71 1.77 0.7688 1.773 17.391
14.9 111.46 1.79 0.7740 1.785 17.508
Page 20
AND FLUID WEIGHT
Lbs./Sq. In.
15.0 112.21 1.80 0.7792 1.797 17.626
15.1 112.96 1.81 0.7844 1.809 17.744
15.2 113.70 1.82 0.7896 1.821 17.861
15.3 114.45 1.83 0.7948 1.833 17.979
15.4 115.20 1.85 0.8000 1.845 18.096
15.5 115.95 1.86 0.8052 1.857 18.214
15.6 116.70 1.87 0.8104 1.869 18.332
15.7 117.44 1.88 0.8156 1.881 18.449
15.8 118.19 1.89 0.8208 1.893 18.567
15.9 118.94 1.91 0.8260 1.905 18.685
16.0 119.69 1.92 0.8312 1.917 18.802
16.1 120.44 1.93 0.8364 1.929 18.920
16.2 121.18 1.94 0.8416 1.941 19.037
16.3 121.93 1.95 0.8468 1.953 19.155
16.4 122.68 1.97 0.8519 1.965 19.270
16.5 123.43 1.98 0.8571 1.977 19.388
16.6 124.18 1.99 0.8623 1.989 19.506
16.7 124.92 2.00 0.8675 2.001 19.623
16.8 125.67 2.01 0.8727 2.013 19.741
16.9 126.42 2.03 0.8779 2.025 19.859
17.0 127.17 2.04 0.8831 2.037 19.976
17.1 127.92 2.05 0.8883 2.049 20.094
17.2 128.66 2.06 0.8935 2.061 20.211
17.3 129.41 2.07 0.8987 2.073 20.329
17.4 130.16 2.09 0.9039 2.085 20.447
17.5 130.91 2.10 0.9091 2.097 20.564
17.6 131.66 2.11 0.9143 2.109 20.682
17.7 132.40 2.12 0.9195 2.121 20.800
17.8 133.15 2.13 0.9247 2.133 20.917
17.9 133.90 2.14 0.9299 2.145 21.035
18.0 134.65 2.16 0.9351 2.157 21.153
18.1 135.40 2.17 0.9403 2.169 21.270
18.2 136.15 2.18 0.9455 2.181 21.388
18.3 136.89 2.19 0.9506 2.193 21.503
18.4 137.64 2.20 0.9558 2.205 21.621
18.5 138.39 2.22 0.9610 2.217 21.738
18.6 139.14 2.23 0.9662 2.229 21.856
18.7 139.89 2.24 0.9714 2.241 21.974
18.8 140.63 2.25 0.9766 2.253 22.091
18.9 141.38 2.26 0.9818 2.265 22.209
19.0 142.13 2.28 0.9870 2.277 22.327
19.1 142.88 2.29 0.9922 2.289 22.444
19.2 143.63 2.30 0.9974 2.301 22.562
19.3 144.37 2.31 1.0026 2.313 22.679
19.4 145.12 2.32 1.0078 2.325 22.797
Page 21
AND FLUID WEIGHT
Lbs./Sq. In.
19.5 145.87 2.34 1.0130 2.337 22.915

19.6 146.62 2.35 1.0182 2.349 23.032
19.7 147.37 2.36 1.0234 2.361 23.150
19.8 148.11 2.37 1.0286 2.373 23.268
19.9 148.86 2.38 1.0338 2.385 23.385
20.0 149.61 2.40 1.0390 2.397 23.503
20.1 150.36 2.41 1.0442 2.409 23.620
20.2 151.11 2.42 1.0493 2.421 23.736
20.3 151.85 2.43 1.0545 2.433 23.853
20.4 152.60 2.44 1.0597 2.445 23.971
20.5 153.35 2.46 1.0649 2.456 24.089
20.6 154.10 2.47 1.0701 2.468 24.206
20.7 154.85 2.48 1.0753 2.480 24.324
20.8 155.59 2.49 1.0805 2.492 24.442
20.9 156.34 2.50 1.0857 2.504 24.559
21.0 157.09 2.52 1.0909 2.516 24.677
21.1 157.84 2.53 1.0961 2.528 24.794
21.2 158.59 2.54 1.1013 2.540 24.912
21.3 159.33 2.55 1.1065 2.552 25.030
21.4 160.08 2.56 1.1117 2.564 25.147
21.5 160.83 2.58 1.1169 2.576 25.265
21.6 161.58 2.59 1.1221 2.588 25.383
21.7 162.33 2.60 1.1273 2.600 25.500
21.8 163.07 2.61 1.1325 2.612 25.618
21.9 163.82 2.62 1.1377 2.624 25.735
22.0 164.57 2.64 1.1429 2.636 25.853
22.1 165.32 2.65 1.1480 2.648 25.968
22.2 166.07 2.66 1.1532 2.660 26.086
22.3 166.82 2.67 1.1584 2.672 26.204
22.4 167.56 2.68 1.1636 2.684 26.321
22.5 168.31 2.70 1.1688 2.696 26.439
22.6 169.06 2.71 1.1740 2.708 26.557
22.7 169.81 2.72 1.1792 2.720 26.674
22.8 170.56 2.73 1.1844 2.732 26.792
22.9 171.30 2.74 1.1896 2.744 26.909
23.0 172.05 2.76 1.1948 2.756 27.027
Page 22
EFFECT OF WATER ON MUD WEIGHT
Water Added
Bbl./100 bbl. Weight of Resulting Mud
Mud Lb./Gal.
000 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0
005 9.9 10.9 11.8 12.8 13.7 14.7 15.6 16.6
010 9.8 10.8 11.7 12.6 13.5 14.4 15.3 16.2
ENGLISH UNITS
015 9.8 10.6 11.5 12.4 13.3 14.1 15.0 15.9
020 9.7 10.6 11.4 12.2 13.1 13.7 14.7 15.6

025 9.7 10.5 11.3 12.1 12.9 13.7 14.5 15.3
030 9.6 10.4 11.1 11.9 12.7 13.5 14.2 15.0
035 9.6 10.3 11.0 11.8 12.5 13.3 14.0 14.7
040 9.5 10.2 10.9 11.7 12.4 13.1 13.8 14.5

045 9.5 10.2 10.9 11.6 12.2 12.9 13.6 14.3
050 9.4 10.1 10.8 11.4 12.1 12.8 13.4 14.1
060 9.4 10.0 10.6 11.2 11.9 12.5 13.1 13.7
070 9.3 9.9 10.5 11.1 11.7 12.2 12.8 13.4

080 9.3 9.8 10.4 10.9 11.5 12.0 12.6 13.1
090 9.2 9.7 10.3 10.8 11.3 11.8 12.4 12.9
100 9.2 9.2 10.2 10.7 11.2 11.7 12.2 12.7
(From Principles of Drilling Mud Control Eleventh Edition)

MUD WEIGHT ADJUSTMENT WITH BARITE OR WATER
Initial
Mud Desired Mud Weight, lb/gal
Weight,
lb/gal 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0
9 129 159 190 123 156 192 229 268 308 350 395 442 490 542 596 653 714 778
9.5 129 160 192 125 160 196 234 273 315 359 405 452 503 557 612 672 735
10 143 130 161 193 128 164 201 239 280 323 368 414 464 516 571 630 691
10.5 185 130 131 162 196 131 167 205 245 287 331 376 426 479 531 588 648
ENGLISH UNITS
11 128 160 123 131 164 198 134 171 210 251 294 339 387 437 490 546 605
11.5 171 190 146 119 132 166 101 137 175 215 258 301 348 397 449 504 562
12 214 120 169 137 116 133 167 103 140 179 221 263 310 357 408 462 518
12.5 256 150 192 156 132 114 134 168 105 144 184 226 271 318 367 420 475
13 299 180 115 175 148 127 112 134 170 108 147 188 232 278 327 378 432
13.5 342 210 138 194 163 141 124 111 135 172 111 150 194 238 286 336 389
14 385 240 161 112 176 154 136 121 110 136 174 113 155 199 245 294 345
14.5 427 270 185 131 195 168 148 132 119 119 137 175 116 159 204 252 302
15 470 300 208 150 110 182 160 143 129 118 118 137 177 119 163 210 259
15.5 513 330 231 169 126 195 172 154 139 126 116 118 139 179 122 168 216
16 556 360 254 187 142 109 184 164 148 135 124 115 117 140 181 126 172
16.5 598 390 277 206 158 123 196 175 158 144 132 123 114 117 141 184 129
17 641 420 300 225 174 136 108 186 168 153 140 130 121 113 116 142 186
17.5 684 450 323 244 189 150 120 196 177 162 149 138 128 120 112 116 143
18 726 480 346 262 205 163 132 107 817 171 157 145 135 126 118 112 115
The lower left half of this table shows the number of barrels of water which must be The upper right half of this table shows the number of sacks of barite which must be
added to 100 bbl. of mud to produce desired weight reductions. To use this portion of added to 100 bbl. of mud to produce desired weight increases. To use this portio of the
the table, locate the initial mud weight in the vertical column at the left, then locate the table, locate the initial mud weight in the vertical column to the left, then locate the
desired mud weight in the upper horizontal row. The number of barrels of water to be desired mud weight in the upper horizontal row. The number of sacks of barite to be
added per 100 bbl. of mud is read directly across from the initial weight and directly
Page 23
added per 100 bbl. of mud is read directly across from the intial weight and directly below
below the desired mud weight. For example to reduce an 11 lb./gal. mud to a 9.5 lb./gal. the desired mud weight. For example, to raise an 11 lb.gal. mud to 14.5 lb./gal., 251
mud, 128 bbl. of water must be added for every 100 bbl. of mud in the system. sacks of barite must be added per 100 bbl. of mud in the system.
Page 24
ENGLISH UNITS

VELOCITY AND HORSEPOWER
B.P.H. x .2859
Feet per second = (Diameter in inches)2
B.P.D. x .0119
G.P.M. x .4085
B.P.H. x Pressure (psi)

Hydraulic Horsepower = 2447
Hydraulic Horsepower = B.P.H. x Pressure (psi) x .000408

Hydraulic Horsepower = B.P.D. x Pressure (psi) x .000017
Hydraulic Horsepower = B.P.M. x Pressure (psi) x .0245
Hydraulic Horsepower = G.P.M. x Pressure (psi) x .000583
B.P.H. x Pressure (psi) x .000408

Brake Horsepower = Efficiency
B.P.D. x Pressure (psi) x .000017

G.P.M. x Pressure (psi) x .000583

NOTE:
B.P.M. = Barrels per minute B.P.D. = Barrels per day
B.P.H. = Barrels per hour psi = Pounds per square inch
Page 25
METRIC UNITS

VELOCITY AND POWER
m3/hr x 353.68
Meters per second = D2
m3/day x 14.737
L/min x 21.221
Kilowatt = L/min x MPa x .0167
Kilowatt = m3/min x MPa x 16.7
Kilowatt = m3/hr x MPa x 1000
Kilowatt = m3/day x MPa x 24000

Page 26
ABSOLUTE VOLUME FACTORS FOR MATERIALS IN SOLUTION AT 20°C (68°F)
NaCl NaCl KCl KCl CaCl2 CaCl2
Percent by Absolute Volume Percent by Absolute Volume Percent by Absolute Volume
weight of water gal./lb. weight of water gal./lb weight of water gal./lb.
5.00 .0368 1.00 .0436 2.00 .0220
6.00 .0372 2.00 .0440 4.00 .0229
10.00 .0385 3.00 .0444 5.00 .0234
12.00 .0391 5.00 .0450 10.00 .0252
15.00 .0398 10.00 .0463 15.00 .0266
18.00 .0405 15.00 .0475 20.00 .0278
20.00 .0409 20.00 .0481 30.00 .0296
24.00 .0417 25.00 .0488 40.00 .0311
25.00 .0418 30.00 .0493 50.00 .0325
30.00 .0426 31.58 .0495 60.00 .0339
35.14 .0433 66.67 .0346
37.07* .0458*
*Solution at 60°C (140°F)

Page 27
Slurry Density, Water Requirements, and

Yield Calculations
Weight of Materials in one sack of the following cement slurry:
Premium Cement + 35% SSA-1 + 0.5% GasStop + 0.3% CFR-3 + 0.2% HR-5
Mix Slurry at 16.0 lb/gal Density; Find Yield and Water Requirements
Cement ............................. 94 lbs
SSA-1 ............................... (94 lbs X 35/100) = 32.9 lbs
GasStop ............................ (94 lbs X 0.5/100) = 0.47 lbs
CFR-3 .............................. (94 lbs X 0.3/100) = 0.282 lbs
HR-5 ................................ (94 lbs X 0.2/100) = 0.188 lbs
Water ................................ (8.33 lbs/gal X A gals) = 8.33A lbs
Total Weight of Slurry = 127.84 lbs + 8.33A lbs
Volume of Materials in one sack of the cement slurry:
Weight Absolute Vol. Factor Volume

lbs gals/lb gals
Cement 94 lbs X 0.0382 = 3.5908 gals

SSA-1 32.9 lbs X 0.0456 = 1.5002 gals
GasStop 0.47 lbs X 0.1009 = 0.0474 gals
CFR-3 0.282 lbs X 0.0938 = 0.0265 gals
HR-5 0.188 lbs X 0.0750 = 0.0141 gals
Water 8.33A X 0.1200 = A gals
Total Volume of Slurry = 5.1790 gals + A gals

Page 28
Slurry Density, Water Requirements, and

Yield Calculations
Density of the cement slurry:
Slurry Weight 127.84 lbs + 8.33A lbs

Slurry Density = =
Slurry Volume 5.1790 gals + A gals
127.84 lbs + 8.33A lbs

16.0 lb/gal =
5.1790 gals + A gals
16.0 (5.1790 + A) = 127.84 + 8.33A
16.0 A 8.33A = 127.84 - 82.864
A = 44.976 / 7.67 = 5.86 gals water per sack
Slurry Yield:
Slurry Volume (gals) X 0.1337 cuft/gal = (5.1790 + 5.86) X 0.1337cuft = 1.48 cuft/sk
Page 29
SLURRY TABLES
Neat Cement
Class A, C, G, or H Cements
Mixed With Fresh Water
Commonly Applied Slurry Properties
Slurry Density Slurry Yield Water Ratio
Lbs/Gallon cuft/sk gals/sk
14.00 1.51 7.71
14.10 1.48 7.52
14.20 1.46 7.33
14.30 1.44 7.14
14.40 1.41 6.97
14.50 1.39 6.80
14.60 1.37 6.63
14.70 1.34 6.47
14.80 1.32 6.31
14.90 1.30 6.16
15.00 1.28 6.02
15.10 1.27 5.88
15.20 1.25 5.74
15.30 1.23 5.60
15.40 1.21 5.47
15.50 1.19 5.35
15.60 1.18 5.22
15.70 1.16 5.11
15.80 1.15 4.99
15.90 1.13 4.88
16.00 1.12 4.76
16.10 1.10 4.66
16.20 1.09 4.55
16.30 1.07 4.45
16.40 1.06 4.35
16.50 1.05 4.25
16.60 1.04 4.16
16.70 1.02 4.07
16.80 1.01 3.98
16.90 1.00 3.89
17.00 0.99 3.80
17.10 0.98 3.72
17.20 0.97 3.63
17.30 0.96 3.55
17.40 0.94 3.48
17.50 0.93 3.40
Page 30
35% SSA-1 (BWOC) Added to

15.00 1.69 7.58
15.10 1.67 7.39
15.20 1.64 7.21
15.30 1.62 7.03
15.40 1.60 6.86
15.50 1.58 6.69
15.60 1.55 6.53
15.70 1.53 6.37
15.80 1.51 6.22
15.90 1.49 6.07
16.00 1.47 5.92
16.10 1.45 5.78
16.20 1.44 5.64
16.30 1.42 5.51
16.40 1.40 5.38
16.50 1.38 5.25
35% SSA-2 (BWOC) Added to
16.00 1.47 5.92
16.10 1.45 5.78
16.20 1.44 5.64
16.30 1.42 5.51
16.40 1.40 5.38
16.50 1.38 5.25
16.60 1.37 5.13
16.70 1.35 5.00
16.80 1.33 4.88
16.90 1.32 4.77
17.00 1.30 4.65
17.10 1.29 4.54
17.20 1.27 4.43
17.30 1.26 4.33
17.40 1.25 4.22
17.50 1.23 4.12
17.60 1.22 4.02
17.70 1.21 3.93
17.80 1.19 3.83
17.90 1.18 3.74
Page 31
Hi-Dense #4 (10 lbs/sk) Added to

Slurry Density Slurry Yield Water Ratio Hi-Dense Conc.
Lbs/Gallon cuft/sk gals/sk Lbs/sk
16.50 1.19 5.01 10.00
16.60 1.18 4.90 10.00
16.70 1.16 4.80 10.00
16.80 1.15 4.70 10.00
16.90 1.14 4.60 10.00
17.00 1.12 4.50 10.00
17.10 1.11 4.41 10.00
17.20 1.10 4.31 10.00
17.30 1.08 4.22 10.00
17.40 1.07 4.13 10.00
17.50 1.06 4.05 10.00
17.60 1.05 3.96 10.00
17.70 1.04 3.88 10.00


16.50 1.25 5.39 15.00
16.60 1.23 5.28 15.00
16.70 1.22 5.17 15.00
16.80 1.20 5.06 15.00
16.90 1.19 4.95 15.00
17.00 1.18 4.85 15.00
17.10 1.16 4.75 15.00
17.20 1.15 4.65 15.00
17.30 1.14 4.56 15.00
17.40 1.12 4.46 15.00
17.50 1.11 4.37 15.00
17.60 1.10 4.28 15.00
17.70 1.09 4.20 15.00
17.80 1.08 4.11 15.00
17.90 1.07 4.03 15.00
18.00 1.06 3.94 15.00
Page 32

16.50 1.32 5.77 20.00
16.60 1.30 5.65 20.00
16.70 1.28 5.53 20.00
16.80 1.27 5.42 20.00
16.90 1.25 5.31 20.00
17.00 1.24 5.20 20.00
17.10 1.23 5.10 20.00
17.20 1.21 4.99 20.00
17.30 1.20 4.89 20.00
17.40 1.18 4.79 20.00
17.50 1.17 4.70 20.00
17.60 1.16 4.60 20.00
17.70 1.15 4.51 20.00
17.80 1.13 4.42 20.00
17.90 1.12 4.33 20.00
18.00 1.11 4.25 20.00
18.10 1.10 4.16 20.00
18.20 1.09 4.08 20.00

17.00 1.30 5.55 25.00
17.10 1.29 5.44 25.00
17.20 1.27 5.33 25.00
17.30 1.26 5.23 25.00
17.40 1.24 5.12 25.00
17.50 1.23 5.02 25.00
17.60 1.22 4.92 25.00
17.70 1.21 4.83 25.00
17.80 1.19 4.73 25.00
17.90 1.18 4.64 25.00
18.00 1.17 4.55 25.00
18.10 1.16 4.46 25.00
18.20 1.14 4.37 25.00
18.30 1.13 4.28 25.00
18.40 1.12 4.20 25.00
18.50 1.11 4.12 25.00
18.60 1.10 4.04 25.00
Page 33
35% SSA-2 (BWOC) + 10 lbs/sk Hi-Dense

Added to Class G or H Cements
16.50 1.52 6.03 10.00
16.60 1.50 5.89 10.00
16.70 1.48 5.76 10.00
16.80 1.46 5.63 10.00
16.90 1.45 5.50 10.00
17.00 1.43 5.37 10.00
17.10 1.41 5.25 10.00
17.20 1.40 5.13 10.00
17.30 1.38 5.02 10.00
17.40 1.37 4.90 10.00
17.50 1.35 4.79 10.00
17.60 1.34 4.68 10.00
17.70 1.32 4.58 10.00
17.80 1.31 4.47 10.00
17.90 1.30 4.37 10.00
18.00 1.28 4.27 10.00
18.10 1.27 4.17 10.00
18.20 1.26 4.07 10.00
18.30 1.24 3.98 10.00
18.40 1.23 3.89 10.00
Page 34


17.00 1.49 5.72 15.00
17.10 1.48 5.60 15.00
17.20 1.46 5.47 15.00
17.30 1.44 5.35 15.00
17.40 1.43 5.23 15.00
17.50 1.41 5.12 15.00
17.60 1.40 5.00 15.00
17.70 1.38 4.89 15.00
17.80 1.37 4.78 15.00
17.90 1.35 4.68 15.00
18.00 1.34 4.57 15.00
18.10 1.33 4.47 15.00
18.20 1.31 4.37 15.00
18.30 1.30 4.27 15.00
18.40 1.29 4.17 15.00
18.50 1.27 4.08 15.00
Page 35

17.00 1.55 6.05 20.00
17.10 1.54 5.92 20.00
17.20 1.52 5.79 20.00
17.30 1.50 5.67 20.00
17.40 1.49 5.54 20.00
17.50 1.47 5.42 20.00
17.60 1.45 5.30 20.00
17.70 1.44 5.19 20.00
17.80 1.42 5.07 20.00
17.90 1.41 4.96 20.00
18.00 1.39 4.85 20.00
18.10 1.38 4.75 20.00
18.20 1.37 4.64 20.00
18.30 1.35 4.54 20.00
18.40 1.34 4.44 20.00
18.50 1.33 4.34 20.00
18.60 1.31 4.25 20.00
18.70 1.30 4.15 20.00
18.80 1.29 4.06 20.00
18.90 1.27 3.97 20.00

17.50 1.53 5.77 25.00
17.60 1.51 5.64 25.00
17.70 1.50 5.52 25.00
17.80 1.48 5.40 25.00
17.90 1.47 5.29 25.00
18.00 1.45 5.18 25.00
18.10 1.44 5.06 25.00
18.20 1.42 4.96 25.00
18.30 1.41 4.85 25.00
18.40 1.39 4.74 25.00
18.50 1.38 4.64 25.00
18.60 1.37 4.54 25.00
18.70 1.35 4.44 25.00
18.80 1.34 4.35 25.00
18.90 1.33 4.25 25.00
19.00 1.32 4.16 25.00
Page 36

14.00 1.51 7.71
14.10 1.48 7.52
14.20 1.46 7.33
14.30 1.44 7.14
14.40 1.41 6.97
14.50 1.39 6.80
14.60 1.37 6.63
14.70 1.34 6.47
14.80 1.32 6.31
14.90 1.30 6.16
15.00 1.28 6.02
15.10 1.27 5.88
15.20 1.25 5.74
15.30 1.23 5.60
15.40 1.21 5.47
15.50 1.19 5.35
15.60 1.18 5.22
15.70 1.16 5.11
15.80 1.15 4.99
15.90 1.13 4.88
16.00 1.12 4.76
16.10 1.10 4.66
16.20 1.09 4.55
16.30 1.07 4.45
16.40 1.06 4.35
16.50 1.05 4.25
16.60 1.04 4.16
16.70 1.02 4.07
16.80 1.01 3.98
16.90 1.00 3.89
17.00 0.99 3.80
17.10 0.98 3.72
17.20 0.97 3.63
17.30 0.96 3.55
17.40 0.94 3.48
17.50 0.93 3.40
Page 37
3% Salt (BWOW) Added to

Slurry Density Slurry Yield Water Ratio Salt Conc.

14.00 1.54 7.88 1.97
14.10 1.52 7.68 1.92
14.20 1.49 7.48 1.87
14.30 1.46 7.29 1.82
14.40 1.44 7.10 1.78
14.50 1.41 6.93 1.73
14.60 1.39 6.75 1.69
14.70 1.37 6.59 1.65
14.80 1.35 6.43 1.61
14.90 1.33 6.27 1.57
15.00 1.31 6.12 1.53
15.10 1.29 5.97 1.49
15.20 1.27 5.83 1.46
15.30 1.25 5.69 1.42
15.40 1.23 5.56 1.39
15.50 1.21 5.43 1.36
15.60 1.20 5.30 1.32
15.70 1.18 5.18 1.29
15.80 1.16 5.06 1.26
15.90 1.15 4.94 1.24
16.00 1.13 4.83 1.21
16.10 1.12 4.72 1.18
16.20 1.10 4.61 1.15
16.30 1.09 4.51 1.13
16.40 1.07 4.40 1.10
16.50 1.06 4.31 1.08
16.60 1.05 4.21 1.05
16.70 1.03 4.11 1.03
16.80 1.02 4.02 1.00
16.90 1.01 3.93 0.98
17.00 1.00 3.84 0.96
17.10 0.99 3.76 0.94
17.20 0.98 3.67 0.92
17.30 0.96 3.59 0.90
17.40 0.95 3.51 0.88
17.50 0.94 3.43 0.86
17.60 0.93 3.35 0.84
17.70 0.92 3.28 0.82
17.80 0.91 3.21 0.80
17.90 0.90 3.13 0.78
Page 38


14.00 1.57 8.01 3.34
14.10 1.54 7.80 3.25
14.20 1.51 7.59 3.16
14.30 1.48 7.40 3.08
14.40 1.46 7.21 3.00
14.50 1.43 7.03 2.93
14.60 1.41 6.85 2.85
14.70 1.39 6.68 2.78
14.80 1.36 6.51 2.71
14.90 1.34 6.35 2.65
15.00 1.32 6.20 2.58
15.10 1.30 6.05 2.52
15.20 1.28 5.90 2.46
15.30 1.26 5.76 2.40
15.40 1.24 5.62 2.34
15.50 1.23 5.49 2.29
15.60 1.21 5.36 2.23
15.70 1.19 5.24 2.18
15.80 1.17 5.11 2.13
15.90 1.16 4.99 2.08
16.00 1.14 4.88 2.03
16.10 1.13 4.77 1.99
16.20 1.11 4.66 1.94
16.30 1.10 4.55 1.90
16.40 1.08 4.45 1.85
16.50 1.07 4.34 1.81
16.60 1.06 4.25 1.77
16.70 1.04 4.15 1.73
16.80 1.03 4.06 1.69
16.90 1.02 3.96 1.65
17.00 1.01 3.87 1.61
17.10 0.99 3.79 1.58
17.20 0.98 3.70 1.54
17.30 0.97 3.62 1.51
17.40 0.96 3.54 1.47
17.50 0.95 3.46 1.44
17.60 0.94 3.38 1.41
17.70 0.93 3.30 1.38
17.80 0.92 3.23 1.34
17.90 0.91 3.16 1.31
Page 39

14.00 1.62 8.28 6.89
14.10 1.59 8.05 6.71
14.20 1.56 7.83 6.53
14.30 1.53 7.63 6.35
14.40 1.50 7.42 6.18
14.50 1.48 7.23 6.02
14.60 1.45 7.04 5.87
14.70 1.43 6.86 5.72
14.80 1.40 6.69 5.57
14.90 1.38 6.52 5.43
15.00 1.36 6.36 5.29
15.10 1.33 6.20 5.16
15.20 1.31 6.04 5.03
15.30 1.29 5.90 4.91
15.40 1.27 5.75 4.79
15.50 1.25 5.61 4.68
15.60 1.24 5.48 4.56
15.70 1.22 5.35 4.45
15.80 1.20 5.22 4.35
15.90 1.18 5.09 4.24
16.00 1.17 4.97 4.14
16.10 1.15 4.86 4.05
16.20 1.13 4.74 3.95
16.30 1.12 4.63 3.86
16.40 1.10 4.52 3.77
16.50 1.09 4.42 3.68
16.60 1.08 4.32 3.60
16.70 1.06 4.22 3.51
16.80 1.05 4.12 3.43
16.90 1.04 4.03 3.35
17.00 1.02 3.93 3.28
17.10 1.01 3.84 3.20
17.20 1.00 3.75 3.13
17.30 0.99 3.67 3.06
17.40 0.97 3.58 2.99
17.50 0.96 3.50 2.92
17.60 0.95 3.42 2.85
17.70 0.94 3.34 2.79
17.80 0.93 3.27 2.72
17.90 0.92 3.19 2.66
Page 40

14.00 1.71 8.70 13.04
14.10 1.68 8.45 12.66
14.20 1.64 8.21 12.30
14.30 1.61 7.98 11.96
14.40 1.58 7.76 11.63
14.50 1.55 7.54 11.31
14.60 1.52 7.34 11.00
14.70 1.49 7.14 10.71
14.80 1.47 6.95 10.42
14.90 1.44 6.77 10.15
15.00 1.41 6.59 9.88
15.10 1.39 6.42 9.63
15.20 1.37 6.25 9.38
15.30 1.34 6.10 9.14
15.40 1.32 5.94 8.91
15.50 1.30 5.79 8.68
15.60 1.28 5.65 8.47
15.70 1.26 5.51 8.26
15.80 1.24 5.37 8.05
15.90 1.22 5.24 7.85
16.00 1.20 5.11 7.66
16.10 1.19 4.99 7.48
16.20 1.17 4.87 7.30
16.30 1.15 4.75 7.12
16.40 1.14 4.63 6.95
16.50 1.12 4.52 6.78
16.60 1.11 4.42 6.62
16.70 1.09 4.31 6.46
16.80 1.08 4.21 6.31
16.90 1.06 4.11 6.16
17.00 1.05 4.01 6.02
17.10 1.04 3.92 5.88
17.20 1.02 3.83 5.74
17.30 1.01 3.74 5.60
17.40 1.00 3.65 5.47
17.50 0.99 3.56 5.34
17.60 0.97 3.48 5.22
17.70 0.96 3.40 5.10
17.80 0.95 3.32 4.98
17.90 0.94 3.24 4.86
Page 41

14.00 1.94 9.64 28.91
14.10 1.89 9.33 27.97
14.20 1.85 9.03 27.08
14.30 1.81 8.75 26.23
14.40 1.76 8.48 25.42
14.50 1.73 8.22 24.64
14.60 1.69 7.97 23.90
14.70 1.65 7.73 23.19
14.80 1.62 7.51 22.51
14.90 1.58 7.29 21.86
15.00 1.55 7.08 21.23
15.10 1.52 6.88 20.63
15.20 1.49 6.68 20.05
15.30 1.47 6.50 19.49
15.40 1.44 6.32 18.95
15.50 1.41 6.15 18.44
15.60 1.39 5.98 17.94
15.70 1.36 5.82 17.46
15.80 1.34 5.67 16.99
15.90 1.32 5.52 16.54
16.00 1.29 5.37 16.11
16.10 1.27 5.23 15.69
16.20 1.25 5.10 15.28
16.30 1.23 4.96 14.89
16.40 1.21 4.84 14.51
16.50 1.19 4.71 14.14
16.60 1.18 4.60 13.78
16.70 1.16 4.48 13.43
16.80 1.14 4.37 13.10
16.90 1.13 4.26 12.77
17.00 1.11 4.15 12.45
17.10 1.09 4.05 12.14
17.20 1.08 3.95 11.84
17.30 1.06 3.85 11.55
17.40 1.05 3.76 11.26
17.50 1.04 3.66 10.99
17.60 1.02 3.57 10.72
17.70 1.01 3.49 10.46
17.80 1.00 3.40 10.20
17.90 0.98 3.32 9.95
Page 42
74 lb/sk Pozmix
50/50 Poz Cement with No Bentonite

14.00 1.27 5.93
14.10 1.25 5.77
14.20 1.23 5.61
14.30 1.21 5.45
14.40 1.19 5.30
14.50 1.17 5.16
14.60 1.15 5.02
14.70 1.13 4.89
14.80 1.12 4.75
14.90 1.10 4.63
15.00 1.08 4.50
15.10 1.07 4.38
15.20 1.05 4.27
15.30 1.04 4.16
15.40 1.02 4.05
15.50 1.01 3.94
15.60 0.99 3.84
15.70 0.98 3.73
15.80 0.97 3.64
15.90 0.95 3.54
16.00 0.94 3.45
16.10 0.93 3.36
16.20 0.92 3.27
16.30 0.91 3.18
16.40 0.90 3.10
Page 43
74 lb/sk Pozmix
50/50 Poz Cement with 2% Bentonite

13.00 1.58 8.12
13.10 1.54 7.87
13.20 1.51 7.64
13.30 1.48 7.41
13.40 1.45 7.19
13.50 1.42 6.98
13.60 1.40 6.78
13.70 1.37 6.58
13.80 1.35 6.40
13.90 1.32 6.22
14.00 1.30 6.04
14.10 1.28 5.87
14.20 1.25 5.71
14.30 1.23 5.55
14.40 1.21 5.40
14.50 1.19 5.25
14.60 1.17 5.11
14.70 1.16 4.97
14.80 1.14 4.84
14.90 1.12 4.71
15.00 1.10 4.58
15.10 1.09 4.46
15.20 1.07 4.34
15.30 1.06 4.23
15.40 1.04 4.12
Page 44
74 lb/sk Pozmix

12.50 1.80 9.71
12.60 1.76 9.39
12.70 1.72 9.09
12.80 1.68 8.81
12.90 1.64 8.53
13.00 1.61 8.27
13.10 1.57 8.02
13.20 1.54 7.78
13.30 1.51 7.54
13.40 1.48 7.32
13.50 1.45 7.11
13.60 1.42 6.90
13.70 1.40 6.70
13.80 1.37 6.51
13.90 1.35 6.33
14.00 1.32 6.15
14.10 1.30 5.98
14.20 1.28 5.81
14.30 1.26 5.65
14.40 1.24 5.50
14.50 1.22 5.35
14.60 1.20 5.20
14.70 1.18 5.06
14.80 1.16 4.93
14.90 1.14 4.79
Page 45
74 lb/sk Pozmix

12.50 1.83 9.88
12.60 1.79 9.56
12.70 1.75 9.26
12.80 1.71 8.96
12.90 1.67 8.68
13.00 1.64 8.42
13.10 1.60 8.16
13.20 1.57 7.91
13.30 1.54 7.68
13.40 1.51 7.45
13.50 1.48 7.23
13.60 1.45 7.02
13.70 1.42 6.82
13.80 1.40 6.63
13.90 1.37 6.44
14.00 1.35 6.26
14.10 1.32 6.08
14.20 1.30 5.91
14.30 1.28 5.75
14.40 1.26 5.59
14.50 1.24 5.44
14.60 1.22 5.29
14.70 1.20 5.15
14.80 1.18 5.01
14.90 1.16 4.88
Page 46
74 lb/sk Pozmix

12.00 2.12 11.96
12.10 2.06 11.54
12.20 2.01 11.14
12.30 1.96 10.76
12.40 1.91 10.40
12.50 1.87 10.06
12.60 1.82 9.73
12.70 1.78 9.42
12.80 1.74 9.12
12.90 1.70 8.84
13.00 1.67 8.56
13.10 1.63 8.30
13.20 1.60 8.05
13.30 1.57 7.81
13.40 1.54 7.58
13.50 1.51 7.36
13.60 1.48 7.15
13.70 1.45 6.94
13.80 1.42 6.74
13.90 1.40 6.55
14.00 1.37 6.37
14.10 1.35 6.19
14.20 1.33 6.02
14.30 1.30 5.85
14.40 1.28 5.69
Page 47
74 lb/sk Pozmix
65% Cement / 35% Poz with 6% Bentonite

11.50 2.54 15.19
11.60 2.47 14.61
11.70 2.39 14.06
11.80 2.32 13.55
11.90 2.26 13.06
12.00 2.20 12.60
12.10 2.14 12.16
12.20 2.08 11.75
12.30 2.03 11.36
12.40 1.98 10.98
12.50 1.93 10.63
12.60 1.89 10.29
12.70 1.84 9.97
12.80 1.80 9.66
12.90 1.76 9.36
13.00 1.73 9.08
13.10 1.69 8.81
13.20 1.66 8.55
13.30 1.62 8.30
13.40 1.59 8.06
13.50 1.56 7.83
13.60 1.53 7.61
13.70 1.50 7.40
13.80 1.47 7.19
13.90 1.45 6.99
14.00 1.42 6.80
14.10 1.40 6.62
14.20 1.37 6.44
14.30 1.35 6.27
14.40 1.33 6.10
14.50 1.31 5.94
14.60 1.29 5.79
Page 48
74 lb/sk Pozmix
65% Cement / 35% Poz with 6% Bentonite and 3% Salt

Lbs/Gallon cuft/sk gals/sk lbs/sk
11.50 2.60 15.45 3.86
11.60 2.52 14.85 3.71
11.70 2.44 14.28 3.57
11.80 2.37 13.74 3.43
11.90 2.30 13.24 3.31
12.00 2.24 12.77 3.19
12.10 2.18 12.32 3.08
12.20 2.12 11.89 2.97
12.30 2.06 11.49 2.87
12.40 2.01 11.10 2.77
12.50 1.96 10.74 2.68
12.60 1.92 10.39 2.60
12.70 1.87 10.06 2.51
12.80 1.83 9.74 2.43
12.90 1.79 9.44 2.36
13.00 1.75 9.15 2.29
13.10 1.71 8.88 2.22
13.20 1.68 8.61 2.15
13.30 1.64 8.36 2.09
13.40 1.61 8.11 2.03
13.50 1.58 7.88 1.97
13.60 1.55 7.65 1.91
13.70 1.52 7.44 1.86
13.80 1.49 7.23 1.81
13.90 1.46 7.03 1.76
14.00 1.44 6.83 1.71
14.10 1.41 6.65 1.66
14.20 1.39 6.47 1.62
14.30 1.36 6.29 1.57
14.40 1.34 6.12 1.53
14.50 1.32 5.96 1.49
14.60 1.30 5.80 1.45
Page 49
74 lb/sk Pozmix
65% Cement / 35% Poz + 6% Bentonite + 10 lb/sk Gilsonite

11.50 2.57 14.27
11.60 2.49 13.69
11.70 2.42 13.13
11.80 2.35 12.61
11.90 2.28 12.12
12.00 2.22 11.66
12.10 2.16 11.21
12.20 2.11 10.80
12.30 2.05 10.40
12.40 2.00 10.02
12.50 1.95 9.66
12.60 1.91 9.32
12.70 1.86 8.99
12.80 1.82 8.68
12.90 1.78 8.38
13.00 1.74 8.10
13.10 1.71 7.82
13.20 1.67 7.56
13.30 1.64 7.31
13.40 1.61 7.07
13.50 1.58 6.84
13.60 1.55 6.61
13.70 1.52 6.40
13.80 1.49 6.19
13.90 1.46 5.99
14.00 1.44 5.80
14.10 1.41 5.61
14.20 1.39 5.43
14.30 1.36 5.26
14.40 1.34 5.09
14.50 1.32 4.93
14.60 1.30 4.77
Page 50
74 lb/sk Pozmix
85% Cement / 15% Poz with 8% Bentonite

11.00 3.28 20.65
11.10 3.17 19.76
11.20 3.06 18.94
11.30 2.95 18.17
11.40 2.86 17.45
11.50 2.77 16.77
11.60 2.68 16.14
11.70 2.60 15.54
11.80 2.53 14.98
11.90 2.46 14.45
12.00 2.39 13.95
12.10 2.33 13.48
12.20 2.27 13.03
12.30 2.21 12.60
12.40 2.15 12.20
12.50 2.10 11.81
12.60 2.05 11.44
12.70 2.01 11.09
12.80 1.96 10.75
12.90 1.92 10.43
13.00 1.88 10.13
13.10 1.84 9.83
13.20 1.80 9.55
13.30 1.76 9.28
13.40 1.73 9.02
13.50 1.70 8.77
13.60 1.66 8.53
13.70 1.63 8.29
13.80 1.60 8.07
13.90 1.57 7.86
14.00 1.55 7.65
14.10 1.52 7.45
Page 51
74 lb/sk Pozmix
85% Cement / 15% Poz with 8% Bentonite and 3% Salt

Lbs/Gallon cuft/sk gals/sk lbs/sk
11.00 3.38 21.12 5.28
11.10 3.25 20.18 5.04
11.20 3.14 19.32 4.83
11.30 3.03 18.51 4.63
11.40 2.93 17.76 4.44
11.50 2.83 17.06 4.26
11.60 2.74 16.40 4.10
11.70 2.66 15.78 3.94
11.80 2.58 15.20 3.80
11.90 2.51 14.66 3.66
12.00 2.44 14.14 3.53
12.10 2.37 13.65 3.41
12.20 2.31 13.19 3.30
12.30 2.25 12.75 3.19
12.40 2.19 12.33 3.08
12.50 2.14 11.93 2.98
12.60 2.09 11.55 2.89
12.70 2.04 11.19 2.80
12.80 1.99 10.85 2.71
12.90 1.95 10.52 2.63
13.00 1.90 10.21 2.55
13.10 1.86 9.91 2.48
13.20 1.82 9.62 2.40
13.30 1.79 9.34 2.33
13.40 1.75 9.08 2.27
13.50 1.72 8.82 2.20
13.60 1.68 8.58 2.14
13.70 1.65 8.34 2.08
13.80 1.62 8.11 2.03
13.90 1.59 7.89 1.97
14.00 1.56 7.68 1.92
14.10 1.54 7.48 1.87
Page 52
74 lb/sk Pozmix
85% Cement / 15% Poz + 8% Bentonite + 10 lb/sk Gilsonite

11.00 3.32 19.77
11.10 3.20 18.88
11.20 3.09 18.04
11.30 2.98 17.26
11.40 2.89 16.54
11.50 2.79 15.86
11.60 2.71 15.22
11.70 2.63 14.62
11.80 2.55 14.05
11.90 2.48 13.52
12.00 2.41 13.01
12.10 2.35 12.53
12.20 2.29 12.08
12.30 2.23 11.65
12.40 2.18 11.24
12.50 2.12 10.84
12.60 2.07 10.47
12.70 2.03 10.12
12.80 1.98 9.78
12.90 1.94 9.45
13.00 1.90 9.14
13.10 1.86 8.85
13.20 1.82 8.56
13.30 1.78 8.29
13.40 1.75 8.02
13.50 1.71 7.77
13.60 1.68 7.53
13.70 1.65 7.29
13.80 1.62 7.07
13.90 1.59 6.85
14.00 1.56 6.64
14.10 1.54 6.44
Page 53
ENGLISH UNITS
EQUATIONS FOR MAKING
FLOW CALCULATIONS
1. DISPLACEMENT VELOCITY 17.157 Qb 3.056 Qcf
V= =
D2 D2
where, V = velocity, ft. per sec.
Qb = pumping rate, bbls, per min.
Qcf = pumping rate, cu. ft. per min.
D = inside dia. of pipe, inches.
For annulus D2 = DO2 DI2
where, DO = outer pipe inside dia. or hole size, in.
DI = inner pipe outside dia., in.
2. REYNOLDS NUMBER 1.86 V (2-n) ρ
NRe =
K (96/D)n
where, NRe = Reynolds Number, dimensionless.
V = velocity, ft. per sec.
ρ = slurry density, lbs. per gal.
n' = flow behaviour index, dimensionless.
K' = consistency index, lbs.-sec.n' per sq. ft.
D = inside dia. of pipe, in.
For annulus D = D O DI
3. FRICTIONAL PRESSURE DROP 0.039 L ρ V2ƒ
∆P f =
D
where, ∆ P f = friction pressure drop, psi.
L = length of pipe, ft.
V = velocity, ft. per sec.
f = friction factor, dimensionless.
D = inside dia. of pipe, in.
For annulus, D = D O DI
3a. Turbulent Friction Factor for slurries containing no bentonite.
f = 0.0303/NRe0.1612
3b. Turbulent Friction Factor for slurries containing bentonite.
f = 0.00454 + 0.645/NRe0.7
3c. Plug and Laminar Friction Factor f = 16/NRe
4. VELOCITY AT SOME SPECIFIC REYNOLDS NUMBER
For generalized calculations:
NRe for Plug Flow = 100 (maximum)
1
NRe for for Turbulence = 3000
V= (
NRe K (96/D)n
1.86 ρ
) 2-n

K' = consistency index, lb.-sec.n' per sq. ft.
D = inside diamete of pipe, in.
NRe = specified Reynolds No., dimensionless.
For annulus D = D O DI
where, D0 = outer pipe inside dia. or hole size, in.
D1 = inner pipe outside dia., in.
5. HYDROSTATIC PRESSURE Ph = .05195ρH
where, Ph = hydrostatic pressure, psi.
ρ = fluid density, lbs. per gal.
H = height of column, ft.
Page 54
METRIC UNITS
EQUATIONS FOR MAKING

FLOW CALCULATIONS
1. DISPLACEMENT VELOCITY 21221 Q
V=
D
where, V = velocity, m per s.
Q = pumping rate, m3 per min.
D = inside diameter of pipe, mm.
For annulus, D2 = DO2 DI2
where, DO = outer pipe inside diameter or hole size, mm.
D1 = inner pipe outside diameter, mm.
2. REYNOLDS NUMBER 8 V (2-n) ρ
NRe = K 8000 n
where, NRe = Reynolds Number, dimensionless. D ( )
V = velocity, m. per sec.
ρ = slurry density, kg. per m3.
K' = consistency index, Pa-sn'.
For annulus D = D O D I
3. FRICTIONAL PRESSURE DROP 2 L ρ V2ƒ
∆P f =
D
where, Pf = friction pressure drop, kPa.
L = length of pipe, m.
ρ = density of slurry, kg/m3.
V = velocity, m/s.
ƒ = friction factor, dimensionless.
For annulus, D = D O D I
3a. Turbulent Friction Factor for slurries containing no bentonite.
ƒ = 0.0303/NRe0.1612
3b. Turbulent Friction Factor for slurries containing bentonite.
f = 0.00454 + 0.645/NRe0.7
3c. Plug and Laminar Friction Factor f = 16/NRe0.7
4. VELOCITY AT SOME SPECIFIC REYNOLDS NUMBER
For generalized calculations:
NRe for Plug Flow = 100 (maximum)
1
NRe for Turbulence = 3000
V= (
NRe K (8000/D)n 2-n
8ρ )
K' = consistency index Pa-sn'.
ρ = slurry density, kg per m3.
NRe = specified Reynolds No., dimensionless.
For annulus D = D O D I
D0 = outer pipe inside diameter or hole size, mm.
D1 = inner pipe outside diameter, mm.
5. HYDROSTATIC PRESSURE Ph = .00981ρH

where, Ph = hydrostatic pressure, kPa.
ρ = fluid density, kg/m3.
H = height of column, m.
Page 55
ENGLISH UNITS
SAND (20-40 MESH) FILL-UP IN CASING
Pounds Linear Feet per
Size Weight ID Capacity Capacity Sand per Per Pound
in. lb/ft in. ft3/ft ft/ft3 Linear Foot of Sand
9.50 4.090 0.0912 10.9604 9.7259 0.1028

4½ 10.50 4.052 0.0896 11.1669 9.5460 0.1048
11.60 4.000 0.0873 11.4592 9.3026 0.1075
13.50 3.920 0.0838 11.9316 8.9342 0.1119
11.50 4.560 0.1134 8.8174 12.0897 0.0827
13.00 4.494 0.1102 9.0783 11.7422 0.0852
5 15.00 4.408 0.1060 9.4360 11.2971 0.0885
18.00 4.276 0.0997 10.0276 10.6307 0.0941
21.00 4.154 0.0941 10.6253 10.0327 0.0997
13.00 5.044 0.1388 7.2065 14.7923 0.0676
14.00 5.012 0.1370 7.2988 14.6052 0.0685
15.00 4.974 0.1349 7.4107 14.3845 0.0695
5½ 15.50 4.950 0.1336 7.4828 14.2461 0.0702
17.00 4.892 0.1305 7.6613 13.9142 0.0719
20.00 4.778 0.1245 8.0312 13.2732 0.0753
23.00 4.670 0.1189 8.4070 12.6800 0.0789
17.00 6.538 0.2331 4.2893 24.8527 0.0402
20.00 6.456 0.2273 4.3989 24.2332 0.0413
22.00 6.398 0.2233 4.4790 23.7998 0.0420
23.00 6.366 0.2210 4.5242 23.5623 0.0424
24.00 6.336 0.2190 4.5671 23.3408 0.0428
26.00 6.276 0.2148 4.6549 22.9008 0.0437
7 28.00 6.214 0.2106 4.7482 22.4506 0.0445
29.00 6.184 0.2086 4.7944 22.2343 0.0450
30.00 6.154 0.2066 4.8413 22.0191 0.0454
32.00 6.094 0.2026 4.9371 21.5918 0.0463
34.00 6.040 0.1990 5.0257 21.2109 0.0471
35.00 6.004 0.1966 5.0862 20.9588 0.0477
38.00 5.920 0.1911 5.2315 20.3764 0.0491
40.00 5.836 0.1858 5.3832 19.8023 0.0505
20.00 7.125 0.2769 3.6116 29.5158 0.0339
24.00 7.025 0.2692 3.7152 28.6931 0.0349
26.40 6.969 0.2649 3.7751 28.2375 0.0354
7-5/8 29.70 6.875 0.2578 3.8791 27.4808 0.0364
33.70 6.765 0.2496 4.0062 26.6085 0.0376
39.00 6.625 0.2394 4.1773 25.5186 0.0392
43.50 6.435 0.2259 4.4277 24.0759 0.0415
24.00 8.097 0.3576 2.7966 38.1182 0.0262
28.00 8.017 0.3506 2.8527 37.3687 0.0268
32.00 7.921 0.3422 2.9222 36.4791 0.0274
36.00 7.825 0.3340 2.9944 35.6003 0.0281
8-5/8 38.00 7.775 0.3297 3.0330 35.1468 0.0285
40.00 7.725 0.3255 3.0724 34.6962 0.0288
43.00 7.651 0.3193 3.1321 34.0346 0.0294
44.00 7.625 0.3171 3.1535 33.8037 0.0296
49.00 7.511 0.3077 3.2500 32.8005 0.0305
29.30 9.063 0.4480 2.2322 47.7561 0.0209
32.30 9.001 0.4419 2.2630 47.1049 0.0212
36.00 8.921 0.4341 2.3038 46.2713 0.0216
38.00 8.885 0.4306 2.3225 45.8986 0.0218
40.00 8.835 0.4257 2.3489 45.3835 0.0220
9-5/8 43.50 8.755 0.4181 2.3920 44.5653 0.0224
47.00 8.681 0.4110 2.4329 43.8151 0.0228
53.50 8.535 0.3973 2.5169 42.3537 0.0236
58.40 8.435 0.3881 2.5769 41.3671 0.0242
61.10 8.375 0.3826 2.6140 40.7807 0.0245
71.80 8.125 0.3601 2.7773 38.3823 0.0261
Page 56
METRIC UNITS
SAND (20-40 MESH) FILL-UP IN CASING
Kilograms Meters per
Size Weight ID Capacity Capacity Sand Per Kilogram
mm kg/m mm m3/m m/m3 per Meter of Sand
14.14 103.89 0.0085 117.98 14.47 0.0691
114.30 15.63 102.92 0.0083 120.20 14.21 0.0704
17.26 101.60 0.0081 123.35 13.84 0.0723
20.09 99.57 0.0078 128.43 13.30 0.0752
17.11 115.82 0.0105 94.91 17.99 0.0556
19.35 114.15 0.0102 97.72 17.47 0.0572
127.00 22.32 111.96 0.0098 101.57 16.81 0.0595
26.79 108.61 0.0093 107.94 15.82 0.0632
31.25 105.51 0.0087 114.37 14.93 0.0670
19.35 128.12 0.0129 77.57 22.01 0.0454
20.83 127.31 0.0127 78.56 21.73 0.0460
22.32 126.34 0.0125 79.77 21.41 0.0467
139.70 23.07 125.73 0.0124 80.54 21.20 0.0471
25.30 124.26 0.0121 82.47 20.71 0.0483
29.76 121.36 0.0116 86.45 19.75 0.0506
34.23 118.62 0.0110 90.49 18.87 0.0530
25.30 166.07 0.0217 46.17 36.98 0.0270
29.76 163.98 0.0211 47.35 36.06 0.0277
32.74 162.51 0.0207 48.21 35.42 0.0282
34.23 161.70 0.0205 48.70 35.06 0.0285
35.72 160.93 0.0203 49.16 34.73 0.0288
38.69 159.41 0.0200 50.10 34.08 0.0293
177.80 41.67 157.84 0.0196 51.11 33.41 0.0299
43.16 157.07 0.0194 51.61 33.09 0.0302
44.64 156.31 0.0192 52.11 32.77 0.0305
47.62 154.79 0.0188 53.14 32.13 0.0311
50.60 153.42 0.0185 54.10 31.57 0.0317
52.09 152.50 0.0183 54.75 31.19 0.0320
56.55 150.37 0.0178 56.31 30.32 0.0330
59.53 148.23 0.0173 57.94 29.47 0.0340
29.76 180.98 0.0257 38.87 43.92 0.0228
35.72 178.44 0.0250 39.99 42.70 0.0234
39.29 177.01 0.0246 40.63 42.02 0.0237
193.68 44.20 174.63 0.0240 41.75 40.90 0.0244
50.15 171.83 0.0232 43.12 39.60 0.0253
58.04 168.28 0.0222 44.96 37.98 0.0263
64.74 163.45 0.0210 47.66 35.83 0.0280
35.72 205.66 0.0332 30.10 56.73 0.0176
41.57 203.63 0.0326 30.71 55.61 0.0180
47.62 201.19 0.0318 31.45 54.29 0.0184
53.57 198.76 0.0310 32.23 52.98 0.0189
219.08 56.65 197.49 0.0306 32.65 52.30 0.0191
59.53 196.22 0.0302 33.07 51.63 0.0194
63.99 194.34 0.0297 33.70 50.65 0.0197
65.48 193.68 0.0295 33.94 50.31 0.0199
72.92 190.78 0.0286 34.98 48.81 0.0204
43.60 230.20 0.0416 24.03 71.07 0.0140
48.07 228.63 0.0411 24.36 70.10 0.0143
53.57 226.59 0.0403 24.80 68.86 0.0145
56.55 225.68 0.0400 25.00 68.30 0.0146
59.53 224.41 0.0395 25.28 67.54 0.0148
244.48 64.74 222.38 0.0388 25.75 66.32 0.0150
69.94 220.50 0.0382 26.19 65.20 0.0153
79.62 216.79 0.0369 27.09 63.03 0.0159
86.91 214.25 0.0361 27.74 61.56 0.0162
90.93 212.73 0.0355 28.14 60.69 0.0165
106.85 206.38 0.0335 29.89 57.12 0.0175
Page 57
DEPTH CONVERSION TABLE

FEET OR METERS
FEET TO BE CONVERTED METERS
3.28083 1 0.3048
6.56 2 0.61
9.84 3 0.91
13.12 4 1.22
16.40 5 1.52
19.68 6 1.83
22.97 7 2.13
26.25 8 2.44
29.53 9 2.74
32.81 10 3.05
65.62 20 6.10
98.42 30 9.14
131.23 40 12.19
164.04 50 15.24
196.85 60 18.29
229.66 70 21.34
262.47 80 24.38
295.27 90 27.43
328.08 100 30.48
656.17 200 60.96
984.25 300 91.44
1,312.33 400 121.92
1,640.42 500 152.40
1,968.50 600 182.88
2,296.58 700 213.36
2,624.66 800 243.84
2,952.75 900 274.32
3,280.83 1,000 304.80
6,561.66 2,000 609.60
9,842.49 3,000 914.40
13,123.32 4,000 1,219.20
16,404.15 5,000 1,524.00
19,684.98 6,000 1,828.80
22,965.81 7,000 2,133.60
26,246.64 8,000 2,438.40
29,527.47 9,000 2,743.20
32,808.30 10,000 3,048.00
49,212.45 15,000 4,572.00
65,616.60 20,000 6,096.00
82,020.75 25,000 7,620.00
Page 58
VOLUME CONVERSION TABLE

Gals. Converted to Gals. or Cu. Ft Cu. Ft. Converted to
Cu. Ft Litres to be converted Gals. Cu. Meters
0.13368 3.78533 1 7.48052 0.028317

0.27 7.57 2 14.96 0.0566
0.40 11.36 3 22.44 0.0850
0.53 15.14 4 29.92 0.113
0.67 18.93 5 37.40 0.142
0.80 22.71 6 44.88 0.170
0.94 26.50 7 52.36 0.198
1.07 30.28 8 59.84 0.227
1.20 34.07 9 67.32 0.255
1.34 37.85 10 74.81 0.283
2.67 75.71 20 149.61 0.57
4.01 113.56 30 224.42 0.85
5.35 151.41 40 299.22 1.13
6.68 189.27 50 374.03 1.42
8.02 227.12 60 448.83 1.70
9.36 264.97 70 523.64 1.98
10.69 302.83 80 598.44 2.27
12.03 340.68 90 673.25 2.55
13.37 378.53 100 748.05 2.83
26.74 757.07 200 1,496.10 5.66
40.1 1,135.6 300 2,244.2 8.5
53.5 1,514.1 400 2,992.2 11.3
66.8 1,892.7 500 3,740.3 14.2
80.2 2,271.2 600 4,488.3 17.0
93.6 2,649.7 700 5,236.4 19.8
106.9 3,028.3 800 5,984.4 22.7
120.3 3,406.8 900 6,732.5 25.5
133.7 3,785.3 1,000 7,480.5 28.3
267.4 7,570.7 2,000 14,961.0 56.6
401.0 11,356.0 3,000 22,441.6 85.0
534.7 15,141.3 4,000 29,922.1 113.3
668.4 18,926.7 5,000 37,402.6 141.6
802.1 22,712.0 6,000 44,883.1 169.9
935.8 26,497.3 7,000 52,363.6 198.2
1,069.4 30,282.6 8,000 59,844.2 226.5
1,203.1 34,068.0 9,000 67,324.7 254.9
1,336.8 37,853.3 10,000 74,805.2 283.2
2,005.2 56,780.0 15,000 112,207.8 424.8
2,673.6 75,706.6 20,000 149,610.4 566.3
3,342.0 94,633.3 25,000 187,013.0 707.9
Page 59
COMPRESSIVE STRENGTH CONVERSION TABLE

N/cm2 or PSI
PSI kPa to be converted N/cm2 kPa
7.25 50 5 3.45 34.5
14.5 100 10 6.89 68.9
29.0 200 20 13.8 138
43.5 300 30 20.7 207
58.0 400 40 27.6 276
72.5 500 50 34.5 345
87.0 600 60 41.4 414
102 700 70 48.3 483
116 800 80 55.2 552
131 900 90 62.1 621
145 1 000 100 68.9 689
290 2 000 200 138 1 380
435 3 000 300 207 2 070
580 4 000 400 276 2 760
725 5 000 500 345 3 450
870 6 000 600 414 4 140
1,020 7 000 700 483 4 830
1,160 8 000 800 552 5 520
1,310 9 000 900 621 6 210
1,450 10 000 1000 689 6 890
1,600 11 000 1,100 758 7 580
1,740 12 000 1200 827 8 270
1,890 13 000 1,300 896 8 960
2,030 14 000 1,400 965 9 650
2,180 15 000 1,500 1 030 10 300
2,320 16 000 1,600 1 100 11 000
2,470 17 000 1,700 1 170 11 700
2,610 18 000 1,800 1 240 12 400
2,760 19 000 1,900 1 310 13 100
2,900 20 000 2,000 1 380 13 800
4,350 30 000 3,000 2 070 20 700
5,800 40 000 4,000 2 760 27 600
7,250 50 000 5,000 3 450 34 500
8,700 60 000 6,000 4 140 41 400
10,200 70 000 7,000 4 830 48 300
11,600 80 000 8,000 5 520 55 200
13,100 90 000 9,000 6 210 62 100
14,500 100 000 10,000 6 890 68 900
21,800 150 000 15,000 10 300 103 000
29,000 200 000 20,000 13 800 138 000
1 N/cm2 = 10 kPa 1 PSI = .6894757 N/cm2

1 N/cm2 = 1.450377 PSI 1 PSI = 6.894757 kPa
Page 60
TEMPERATURE CONVERSION TABLES

Reading in Reading in
ºF or ºC ºF or ºC
ºF to be converted ºC ºF to be converted ºC
0.4 18 27.78 +116.6 +47 +8.33
+3.2 16 26.67 +118.4 +48 +8.89
+6.8 14 25.56 +120.2 +49 +9.44
+10.4 12 24.44 +122.0 +50 +10.00
+14.0 10 23.33 +123.8 +51 +10.56
+17.6 8 22.22 +123.8 +52 +11.11
+19.4 7 21.67 +127.4 +53 +11.67
+21.2 6 21.11 +129.2 +54 +12.22
+23.0 5 20.56 +131.0 +55 +12.78
+24.8 4 20.00 +132.8 +56 +13.33
+26.6 3 19.44 +134.6 +57 +13.89
+28.4 2 18.99 +136.4 +58 +14.44
+30.2 1 18.33 +138.2 +59 +15.00
+32.0 ±0 17.78 +140.0 +60 +15.56
+33.8 +1 17.22 +141.8 +61 +16.11
+35.6 +2 16.67 +143.6 +62 +16.67
+37.4 +3 16.11 +145.4 +63 +17.22
+39.2 +4 15.56 +147.2 +64 +17.78
+41.0 +5 15.00 +149.0 +65 +18.33
+42.8 +6 14.44 +150.8 +66 +18.89
+44.6 +7 13.89 +152.6 +67 +19.44
+46.4 +8 13.33 +154.4 +68 +20.00
+48.2 +9 12.78 +156.2 +69 +20.56
+50.0 +10 12.22 +158.0 +70 +21.11
+51.8 +11 11.67 +159.8 +71 +21.67
+53.6 +12 11.11 +161.6 +72 +22.22
+55.4 +13 10.56 +163.4 +73 +22.78
+57.2 +14 10.00 +165.2 +74 +23.33
+59.0 +15 9.44 +167.0 +75 +23.89
+60.8 +16 8.89 +168.8 +76 +24.44
+62.6 +17 8.33 +170.6 +77 +25.00
+64.4 +18 7.78 +172.4 +78 +25.56
+66.2 +19 7.22 +174.2 +79 +26.11
+68.0 +20 6.67 +176.0 +80 +26.67
+69.8 +21 6.11 +177.8 +81 +27.22
+71.6 +22 5.56 +179.6 +82 +27.78
+73.4 +23 5.00 +181.4 +83 +28.33
+75.2 +24 4.44 +183.2 +84 +28.89
+77.0 +25 3.89 +185.0 +85 +29.44
+78.8 +26 3.33 +186.8 +86 +30.00
+80.6 +27 2.78 +188.6 +87 +30.56
+82.4 +28 2.22 +190.4 +88 +31.11
+84.2 +29 1.67 +192.2 +89 +31.67
+86.0 +30 1.11 +194.0 +90 +32.22
+87.8 +31 0.56 +195.8 +91 +32.78
+89.6 +32 ±0.00 +197.6 +92 +33.33
+91.4 +33 +0.56 +199.4 +93 +33.89
+93.2 +34 +1.11 +201.2 +94 +34.44
+95.0 +35 +1.67 +203.0 +95 +35.00
+96.8 +36 +2.22 +204.8 +96 +35.56
+98.6 +37 +2.78 +206.6 +97 +36.11
+100.4 +38 +3.33 +208.4 +98 +36.67
+102.2 +39 +3.89 +210.2 +99 +37.22
+104.0 +40 +4.44 +212.0 +100 +37.78
+105.8 +41 +5.00 +213.8 +101 +38.33
+107.6 +42 +5.56 +215.6 +102 +38.89
+109.4 +43 +6.11 +217.4 +103 +39.44
+111.2 +44 +6.67 +219.2 +104 +40.00
+113.0 +45 +7.22 +221.0 +105 +40.56
+114.8 +46 +7.78 +222.8 +106 +41.11
Page 61

+224.6 +107 +41.67 +332.6 +167 +75.00
+226.4 +108 +42.22 +334.4 +168 +75.56
+228.2 +109 +42.78 +336.2 +169 +76.11
+230.0 +110 +43.33 +338.0 +170 +76.67
+231.8 +111 +43.89 +339.8 +171 +77.22
+233.6 +112 +44.44 +341.6 +172 +77.78
+235.4 +113 +45.00 +343.4 +173 +78.33
+237.2 +114 +45.56 +345.2 +174 +78.89
+239.0 +115 +46.11 +347.0 +175 +79.44
+240.8 +116 +46.67 +348.8 +176 +80.00
+242.6 +117 +47.22 +350.6 +177 +80.56
+244.4 +118 +47.78 +352.4 +178 +81.11
+246.2 +119 +48.33 +354.2 +179 +81.67
+248.0 +120 +48.89 +356.0 +180 +82.22
+249.8 +121 +49.44 +357.8 +181 +82.78
+251.6 +122 +50.00 +359.6 +182 +83.33
+253.4 +123 +50.56 +361.4 +183 +83.89
+255.2 +124 +51.11 +363.2 +184 +84.44
+257.0 +125 +51.67 +365.0 +185 +85.00
+258.8 +126 +52.22 +366.8 +186 +85.56
+260.6 +127 +52.78 +368.6 +187 +86.11
+262.4 +128 +53.33 +370.4 +188 +86.67
+264.2 +129 +53.89 +372.2 +189 +87.22
+266.0 +130 +54.44 +374.0 +190 +87.78
+267.8 +131 +55.00 +375.8 +191 +88.33
+269.6 +132 +55.56 +377.6 +192 +88.89
+271.4 +133 +56.11 +379.4 +193 +89.44
+273.2 +134 +56.67 +381.2 +194 +90.00
+275.0 +135 +57.22 +383.0 +195 +90.56
+276.8 +136 +57.78 +384.8 +196 +91.11
+278.6 +137 +58.33 +386.6 +197 +91.67
+280.4 +138 +58.89 +388.4 +198 +92.22
+282.2 +139 +59.44 +390.2 +199 +92.78
+284.0 +140 +60.00 +392.0 +200 +93.33
+285.8 +141 +60.56 +393.8 +201 +93.89
+287.6 +142 +61.11 +395.6 +202 +94.44
+289.4 +143 +61.67 +397.4 +203 +95.00
+291.2 +144 +62.22 +399.2 +204 +95.56
+293.0 +145 +62.78 +401.0 +205 +96.11
+294.8 +146 +63.33 +402.8 +206 +96.67
+296.6 +147 +63.89 +404.6 +207 +97.22
+298.4 +148 +64.44 +406.4 +208 +97.78
+300.2 +149 +65.00 +408.2 +209 +98.33
+302.0 +150 +65.56 +410.0 +210 +98.89
+303.8 +151 +66.11 +411.8 +211 +99.44
+305.6 +152 +66.67 +413.6 +212 +100.00
+307.4 +153 +67.22 +415.4 +213 +100.56
+309.2 +154 +67.78 +417.2 +214 +101.11
+311.0 +155 +68.33 +419.0 +215 +101.67
+312.8 +156 +68.89 +420.8 +216 +102.22
+314.6 +157 +69.44 +422.6 +217 +102.78
+316.4 +158 +70.00 +424.4 +218 +103.33
+318.2 +159 +70.56 +426.2 +219 +103.89
+320.0 +160 +71.11 +428.0 +220 +104.44
+321.8 +161 +71.67 +431.6 +222 +105.56
+323.6 +162 +72.22 +435.2 +224 +106.67
+325.4 +163 +72.78 +438.8 +226 +107.78
+327.2 +164 +73.33 +442.4 +228 +108.89
+329.0 +165 +73.89 +446.0 +230 +110.00
+330.8 +166 +74.44 +449.6 +232 +111.11
Page 62

+453.2 +234 +112.22 +669.2 +354 +178.89
+456.8 +236 +113.33 +672.8 +356 +180.00
+460.4 +238 +114.44 +676.4 +358 +181.11
+464.0 +240 +115.56 +680.0 +360 +182.22
+467.6 +242 +116.67 +683.6 +362 +183.33
+471.2 +244 +117.78 +687.2 +364 +184.44
+474.8 +246 +118.89 +690.8 +366 +185.56
+478.4 +248 +120.00 +694.4 +368 +186.67
+482.0 +250 +121.11 +698.0 +370 +187.78
+485.6 +252 +122.22 +701.6 +372 +188.89
+489.2 +254 +123.33 +705.2 +374 +190.00
+492.8 +256 +124.44 +708.8 +376 +191.11
+496.4 +258 +125.56 +712.4 +378 +192.22
+500.0 +260 +126.67 +716.0 +380 +193.33
+503.6 +262 +127.78 +719.6 +382 +194.44
+507.2 +264 +128.89 +723.2 +384 +195.56
+510.8 +266 +130.00 +726.8 +386 +196.67
+514.4 +268 +131.11 +730.4 +388 +197.78
+518.0 +270 +132.22 +734.0 +390 +198.89
+521.6 +272 +133.33 +737.6 +392 +200.00
+525.2 +274 +134.44 +741.2 +394 +201.11
+528.8 +276 +135.56 +744.8 +396 +202.22
+532.4 +278 +136.67 +748.4 +398 +203.33
+536.0 +280 +137.78 +752.0 +400 +204.44
+539.6 +282 +138.89 +755.6 +402 +205.56
+543.2 +284 +140.00 +759.2 +404 +206.67
+546.8 +286 +141.11 +762.8 +406 +207.78
+550.4 +288 +142.22 +766.4 +408 +208.89
+554.0 +290 +143.33 +770.0 +410 +210.00
+557.6 +292 +144.44 +773.6 +412 +211.11
+561.2 +294 +145.56 +777.2 +414 +212.22
+564.8 +296 +146.67 +780.8 +416 +213.33
+568.4 +298 +147.78 +784.4 +418 +214.44
+572.0 +300 +148.89 +788.0 +420 +215.56
+575.6 +302 +150.00 +791.6 +422 +216.67
+579.2 +304 +151.11 +795.2 +424 +217.78
+582.8 +306 +152.22 +798.8 +426 +218.89
+586.4 +308 +153.33 +802.4 +428 +220.00
+590.0 +310 +154.44 +806.0 +430 +221.11
+593.6 +312 +155.56 +809.6 +432 +222.22
+597.2 +314 +156.67 +813.2 +434 +223.33
+600.8 +316 +157.78 +816.8 +436 +224.44
+604.4 +318 +158.89 +820.4 +438 +225.56
+608.0 +320 +160.00 +824.0 +440 +226.67
+611.6 +322 +161.11 +827.6 +442 +227.78
°F = 9/5 x °C + 32°
°C = 5/9 (°F 32°)

Page 63
CONVERSION OF PERCENT SALT IN SALT

WATER TO PARTS PER MILLION
Per Cent Parts per Milligrams
Salt Million per Liter
½ 5,000 5,020
1 10,000 10,050
2 20,000 20,250
3 30,000 30,700
4 40,000 41,100
5 50,000 52,000
6 60,000 62,500
7 70,000 73,000
8 80,000 84,500
9 90,000 95,000
10 100,000 107,100
11 110,000 118,500
12 120,000 130,300
13 130,000 142,000
14 140,000 154,100
15 150,000 166,500
16 160,000 178,600
17 170,000 191,000
18 180,000 203,700
19 190,000 216,500
20 200,000 229,600
21 210,000 243,000
22 220,000 256,100
23 230,000 270,000
24 240,000 279,500
25 250,000 283,300
26 260,000 311,300
The parts per million column is true parts per million by weight of the salt
solution.
It is quite common for many laboratories, analyzing water samples, to
report milligrams of salt per liter as parts per million. If it is known that
an analysis is reported in this way, the milligram per liter column should
be used in converting to percent salt rather than the parts per million
column. At low concentrations the error of using the incorrect column is
very small. At high concentrations the error is appreciable unless the
correct column is used.
Page 64
PHYSICAL PROPERTIES OF SODIUM CHLORIDE SOLUTIONS
Percent
Sodium Chloride
by Weight Density Specific Weight of Salt
of of of Solution Gravity Lbs./Gal. Lbs./Bbl. kg/m3 Yield of Freeze Point
Solution Water Lbs./Gal. kg/m3 @ 20º C of Water of Water of Water Solution ºF ºC
10 8.34 1998 0.998 1.000
11 1.01 8.38 1005 1.005 0.08 3.54 10.08 1.005 30.9 10.6
12 2.04 8.45 1013 1.013 0.17 7.15 20.36 1.008 29.9 11.2
13 3.09 8.51 1020 1.020 0.26 10.82 30.85 1.011 28.8 11.8
14 4.17 8.57 1027 1.027 0.35 14.61 41.63 1.015 27.7 12.4
15 5.26 8.62 1034 1.034 0.44 18.42 52.51 1.018 26.2 13.0
16 6.38 8.68 1041 1.041 0.53 22.35 63.69 1.022 25.3 13.7
18 8.70 8.81 1056 1.056 0.73 30.47 86.85 1.029 22.9 15.1
10 11.11 8.93 1071 1.071 0.93 38.92 110.90 1.038 20.2 16.6
12 13.64 9.06 1086 1.086 1.14 47.78 136.16 1.047 17.3 18.2
14 16.28 9.18 1101 1.101 1.36 57.03 162.51 1.056 14.1 19.9
16 19.05 9.31 1116 1.116 1.59 66.73 190.16 1.067 10.6 11.9
18 21.95 9.44 1132 1.132 1.83 76.89 219.11 1.077 6.7 14.0
20 25.00 9.57 1148 1.148 2.09 87.57 249.56 1.089 2.4 16.5
22 28.21 9.71 1164 1.164 2.35 98.81 281.60 1.101 2.5 19.2
24 31.58 9.84 1180 1.180 2.63 110.62 315.24 1.115 + 1.4* 17.0*
26 35.14 9.98 1197 1.197 2.93 123.09 350.78 1.129 +27.9* 12.3*
* Precipitation @ 17ºC, 1.4ºF **Precipitation @ 2.3ºC, 27.9ºF

Density in kg/L and kg/dm3 is equal in numerical value to specific gravity.
PHYSICAL PROPERTIES OF CALCIUM CHLORIDE SOLUTIONS
Percent
Calcium Weight of Anhydrous
Chloride Density Specific* Calcium Chloride
by Wt. of by Wt. of of Solution* Gravity Lbs./Gal. Lbs./Bbl. Kg/m3 Yield of Freeze Point
Solution Water Lbs./Gal. kg/m3 @ 20º C of Water of Water of Water Solution ºF ºC
0.0 8.34 998 0.998 1.000 32. 0.0
1.0 1.01 8.41 1008 1.008 0.08 3.54 10.08 1.002 31.1 10.5
2.0 2.04 8.47 1015 1.015 0.17 7.15 20.36 1.004 30.2 11.0
3.0 3.09 8.54 1024 1.024 0.26 10.82 30.85 1.006 29.7 11.3
4.0 4.17 8.61 1032 1.032 0.35 14.61 41.63 1.008 28.4 12.0
5.0 5.26 8.69 1042 1.042 0.44 18.42 52.51 1.012 27.7 12.4
10.0 11.11 9.04 1084 1.084 0.93 38.92 110.90 1.024 22.3 15.4
15.0 17.65 9.44 1132 1.132 1.47 61.74 176.19 1.040 13.5 10.3
20.2 25.00 9.82 1178 1.178 2.09 87.57 249.56 1.060 10.4 18.0
25.0 33.33 10.24 1228 1.228 2.78 116.76 332.71 1.090 20.6 29.2
30.0 42.86 10.69 1282 1.282 3.57 149.94 427.84 1.114 49.0 45.0
35.0 53.85 11.15 1337 1.337 4.49 188.58 537.55 1.151
40.0 66.67 11.72 1405 1.405 5.56 233.52 665.52 1.186
* Density in kg/L and kg/dm3 is equal in numerical value to specific gravity.
Page 65
Page 66
PHYSICAL PROPERTIES OF POTASSIUM CHLORIDE SOLUTIONS
Percent Weight of kg of kg of
Potassium Chloride Density Potassium Chloride Pottassium Chloride
by Weight of Solution Sp. Gr. Lbs./Gal. Lbs./Bbl. kg/m3 per m3 per m3 Freeze Point
of Solution of Water Lbs./Gal. kg/m3 @ 20º C of Water of Water of Water of Water of Water ºF ºC
0 8.34 998 0.998
1 1.01 8.38 1005 1.005 0.08 3.54 10.08 5.27 4.78 31.2 10.44
2 2.04 8.43 1011 1.011 0.17 7.15 20.36 10.6 9.6 30.3 10.94
3 3.09 8.48 1017 1.017 0.26 10.82 30.85 16.0 14.5 29.5 11.39
4 4.17 8.54 1024 1.024 0.35 14.61 41.63 21.5 19.5 28.7 11.83
6 6.38 8.65 1037 1.037 0.53 22.35 63.69 32.6 29.6 27.0 12.78
8 8.70 8.75 1050 1.050 0.73 30.47 86.85 44.0 39.8 25.2 13.78
10 11.11 8.87 1063 1.063 0.93 38.92 110.90 55.8 50.5 23.3 14.83
12 13.64 8.98 1077 1.077 1.14 47.78 136.16 67.8 61.4 21.4 15.89
14 16.28 9.10 1091 1.091 1.36 57.03 162.51 80.0 72.5 19.3 17.06
16 19.05 9.21 1104 1.104 1.59 66.73 190.16 92.6 84.0 17.4 18.11
18 21.95 9.33 1119 1.119 1.83 76.89 219.11 105.4 95.5 14.9 19.50
20 25.00 9.45 1133 1.113 2.09 87.57 249.56 118.8 107.8 15.0 19.44
22 28.21 9.57 1147 1.147 2.35 98.81 281.60 132.1 119.8 32.6 10.33
24 31.58 9.69 1162 1.162 2.63 110.62 315.24 146.3 132.6 52.0* 11.11*
26.5 36.05 9.82 1178 1.178 3.01 126.28 359.86 163.7 148.5 78.3* 25.72*
* Precipitates
Density in kg/L and kg/dm3 is equal in numerical value to specific gravity.
Page 67
API GRAVITY CONVERSION TABLE

API Specific* Density* Pressure Gradient
Gravity Gravity Lbs./Gal. Kg/m3 PSI/Ft. kPa/m
15% HCL 1.0750 8.962 1075.0 .4654 10.547

10 (Water) 1.0000 8.337 1000.0 .4330 9.807
12 .9861 8.221 986.1 .4270 9.670
15 .9659 8.053 965.9 .4182 9.472
18 .9465 7.891 946.5 .4098 9.282
20 .9340 7.787 934.0 .4044 9.159

22 .9218 7.685 921.8 .3991 9.044
24 .9100 7.587 910.0 .3940 8.924
26 .8984 7.490 898.4 .3890 8.810
28 .8871 7.396 887.1 .3841 8.700
30 .8762 7.305 876.2 .3794 8.592

31 .8708 7.260 870.8 .3771 8.539
32 .8654 7.215 865.4 .3747 8.487
33 .8602 7.171 860.2 .3725 8.436
34 .8550 7.128 855.0 .3702 8.385
35 .8498 7.085 849.8 .3680 8.334

36 .8448 7.043 844.8 .3658 8.284
37 .8398 7.001 839.8 .3638 8.235
38 .8348 6.960 834.8 .3615 8.187
39 .8299 6.919 829.9 .3593 8.139
40 .8251 6.879 825.1 .3573 8.091

41 .8203 6.839 820.3 .3552 8.044
42 (Diesel) .8156 6.800 815.6 .3532 7.998
43 .8109 6.760 810.9 .3511 7.952
44 .8063 6.722 806.3 .3491 7.907
46 .7972 6.646 797.2 .3452 7.818

48 .7883 6.572 788.3 .3413 7.731
50 .7796 6.500 779.6 .3376 7.645
55 .7587 6.325 758.7 .3285 7.440
60 .7389 6.160 738.9 .3200 7.246
*Density in kg/L and kg/dm3 are equal in value to specific

gravity.
141.5
Sp gr @ 60°F =
131.5 + API Gravity
141.5
API Gravity = - 131.5
Sp gr @ 60°F
Page 68
DETERMINE THE API GRAVITY OF AN OIL

Use the API Hydrometer and obtain the gravity of the oil. At
the same time obtain the temperature of the oil. The gravity
should be reported in API* at 60ºF. If the temperature of the
oil is not 60ºF., a correction must be made. If the oil is
above 60ºF., the correction is () minus. If the oil is below
60ºF., the correction is (+) plus.
The correction is 1º API for every 10ºF. over or under 60ºF.
(15.56ºC.)*
Example:
Temperature above 60ºF.

Observed API Gravity = 35.2º API
Observed Temperature = 77ºF.
Correction is () minus 77-60
temperature is above 60ºF. = = 1.7
Correction 10
The API Gravity corrected to 60ºF., is:

35.2 1.7 = 33.5º API @ 60ºF.
Temperature below 60ºF.

Observed API Gravity = 38.3º API
Observed Temperature = 51.0ºF.
Correction is (+) plus as 60-51
temperature is below 60ºF., = = 0.9
Correction 10
The API Gravity corrected to 60ºF., is:

38.3 + 0.9 = 39.2º API @ 60ºF.
* Must convert Celsius (°C) to Fahrenheit (F°) for this

correction. See Section 240, pages 9, 10 and 11 for
temperature conversions.
Page 69
STANDARDS FOR
METRIC CONVERSION FACTORS
The following conversion factors are those published by
the American Society for Testing and Materials (ASTM) in
E380-76. These same units may be found in literature
published by all U.S. Technical Societies, i.e., API Bulletin
2563, American National Standards Institute ANSIZ 210.1,
Society of Petroleum Engineers, The Canadian Petroleum
Association (CPA) and others.
The metric units and conversion factors adopted by the
ASTM are based on the International System of Units
(designated SI for Systeme International d'Unites), fixed by
the International Committee for Weights and Measures. This
system has been adopted by the International Organization
for Standardization in ISO Recommendation R-31.
Conversion factors herein are written as a number equal
to or greater than one and less than ten with six or less
decimal places. This number is followed by the letter E (for
exponent), a plus or minus symbol, and two digits which
indicate the power of 10 by which the number must be
multiplied to obtain the correct value. For example:
(1) 3.523 907 E02 is 3.523 907 x 102

or
0.035 239 07
(2) 3.386 389 E+03 is 3.386 389 x 103

or
3 387.389
(3) Further examples of conversion are:

To convert from: To multiply by:
pound-force per square foot Pa 4.788 026 E+01
inch m 2.540 000 E0
1 lbf/ft2 = 47.880 26 Pa
1 inch = 0.0254 m (exactly)
CLASSIFIED LIST OF UNITS
Page 70
To convert from To Multiply by

ACCELERATION
ft/s 2 .......................................................................... meter per second 2 (m/s2) ............................................. 3.048 000 *E01
free fall, standard (g) ............................................... meter per second 2 (m/s2) ............................................. 9.806 650 *E+00
gal ............................................................................ meter per second 2 (m/s2) ............................................. 1.000 000 *E02
in/s2 .......................................................................... meter per second 2 (m/s2) ............................................. 2.540 000 *E02
ANGLE
degree (angle) .......................................................... radian (rad) ................................................................... 1.745 329 *E02
minute (angle) .......................................................... radian (rad) ........................................... ........................ 2.908 882 *E04
second (angle) .......................................................... radian (rad) ........................................... ........................ 4.848 137 *E=06
AREA
acre (U.S. survey)1 ................................................. meter2 (m2) ................................................................... 4.046 873 *E+03
are ............................................................................ meter 2 (m2) ................................................................... 1.000 000 *E+02
barn .......................................................................... meter 2 (m2) ................................................................... 1.000 000 *E28
circular mil ................................................................ meter2 (m2) ................................................................... 5.067 075 *E10

ft 2 ............................................................................. meter 2 (m2) ................................................................... 9.290 304 *E02
hectar ....................................................................... meter 2 (m2) ................................................................... 1.000 000 *E+04
in2 ............................................................................. meter 2 (m2) ................................................................... 6.451 600 *E04
mi2 (international) .................................................... meter2 (m2) ................................................................... 2.589 988 *E+06
mi2 (U.S. survey)1 .................................................. meter2 (m2) ................................................................... 2.589 988 *E+06
section ..................................................................... meter2 (m2) ................................................................... (see footnote 1)
township ................................................................... meter2 (m2) ................................................................... (see footnote 1)
yd 2 ............................................................................ meter 2 (m2) ................................................................... 8.361 274 *E01
BENDING MOMENT OR TORQUE
dyne cm ................................................................................. newton meter (Nm) ....................................................................... 1.000 000 *E07
kgf m ..................................................................................... newton meter (Nm) ....................................................................... 9.806 650 *E+00
ozf in ..................................................................................... newton meter (Nm) ....................................................................... 7.061 552 *E03
lbf in ...................................................................................... newton meter (Nm) ....................................................................... 1.129 848 *E01
lbf in ...................................................................................... newton meter (Nm) ....................................................................... 1.355 818 *E+00
BENDING MOMENT OR TORQUE PER UNTIT LENGTH
lbf ft/in .................................................................................... newton meter per meter (Nm/m) .................................................... 5.337 866 *E+01
lbf ft/in .................................................................................... newton meter per meter (Nm/m) .................................................... 4.448 222 *E+00
CAPACITY
(See Volume)
DENSITY
(See Mass Per Unit Volume)
ELECTRICITY AND MAGNETISM8
abampere ................................................................................. ampere (A) .................................................................................... 1.000 000 *E+01
abcoulomb ................................................................................ coulomb (C) .................................................................................. 1.000 000 *E+01
abfarad ..................................................................................... farad (F) ........................................................................................ 1.000 000 *E+09
abhenry .................................................................................... henry (H) ....................................................................................... 1.000 000 *E09
abmho ...................................................................................... siemens (S) ................................................................................... 1.000 000 *E09
abohm ...................................................................................... ohm (Ω) ......................................................................................... 1.000 000 *E09
abvolt ....................................................................................... volt (V) .......................................................................................... 1.000 000 *E08
ampere hour ............................................................................. coulomb (C) .................................................................................. 3.600 000 *E+03
EMU of capacitance ................................................................. farad (F) ........................................................................................ 1.000 000 *E+09
EMU of current ........................................................................ ampere (A) .................................................................................... 1.000 000 *E+01
EMU of electric potential .......................................................... volt (V) .......................................................................................... 1.000 000 *E08
Page 71
8ESU means electrostatic cgs unit. EMU means electromagnetic cgs unit.
Page 72
ELECTRICITY AND MAGNETISM8 (Cont'd)
EMU of inductance .................................................................... henry (H) ....................................................................................... 1.000 000 *E09
EMU of resistance .................................................................... ohm (Ω) ......................................................................................... 1.000 000 *E09
ESU of capacitance ................................................................... farad (F) ........................................................................................ 1.112 650 *E12
ESU of current .......................................................................... ampere (A) .................................................................................... 3.335 650 *E10
ESU of electric potential ............................................................ volt (V) .......................................................................................... 2.997 950 *E+12
ESU of inductance ..................................................................... henry (H) ....................................................................................... 8.987 554 *E+11
ESU of resistance ..................................................................... ohm (Ω) ......................................................................................... 8.987 554 *E+11
faraday (based on carbon-12) .................................................... coulomb (C) .................................................................................. 9.648 700 *E+04
faraday (chemical) ..................................................................... coulomb (C) .................................................................................. 9.649 570 *E+04
faraday (physical) ...................................................................... coulomb (C) .................................................................................. 9.652 190 *E+04
gamma ...................................................................................... tesla (T) ........................................................................................ 1.000 000 *E09
gauss ....................................................................................... tesla (T) ........................................................................................ 1.000 000 *E04
gilbert ....................................................................................... ampere (A) .................................................................................... 7.957 747 *E01
maxwell ..................................................................................... weber (Wb) .................................................................................... 1.000 000 *E08
mho ........................................................................................... siemens (S) ................................................................................... 1.000 000 *E+00
oersted ...................................................................................... ampere per meter (A/m) ................................................................. 7.957 747 *E+01
ohm centimeter .......................................................................... ohm meter (Ω m) ............................................................................ 1.000 000 *E02
ohm circular-mil per foot ............................................................ ohm millimeter2 per meter (Ω mm2/m) ............................................ 1.662 426 *E03
statampere ................................................................................ ampere (A) .................................................................................... 3.335 640 *E10
statcoulomb ............................................................................... coulomb (C) .................................................................................. 3.335 640 *E10
statfarad .................................................................................... farad (F) ........................................................................................ 1.112 650 *E12
stathenry ................................................................................... henry (H) ....................................................................................... 8.987 554 *E+11
statmho ..................................................................................... siemens (S) ................................................................................... 1.112 650 *E12
statohm ..................................................................................... ohm (Ω) ......................................................................................... 8.987 554 *E+11
statvolt ...................................................................................... volvt (V) ......................................................................................... 2.997 925 *E+02
unit pole .................................................................................... weber (Wb) .................................................................................... 1.256 637 *E07
ENERGY
(Includes Work)
British thermal unit (International Table)3 .................................. joule (J) ......................................................................................... 1.055 056 *E+03
British thermal unit (mean) ....................................................... joule (J) ......................................................................................... 1.055 876 *E+03
British thermal unit (thermochemical) ........................................ joule (J) ......................................................................................... 1.054 350 *E+03
British thermal unit (39ºF) ........................................................ joule (J) ......................................................................................... 1.059 670 *E+03
calorie (International Table) ...................................................... joule (J) ......................................................................................... 4.186 800 *E+00
calorie (mean) .......................................................................... joule (J) ......................................................................................... 4.190 020 *E+00
calorie (thermochemical) .......................................................... joule (J) ......................................................................................... 4.184 000 *E+00
calorie (15ºC) .......................................................................... joule (J) ......................................................................................... 4.185 800 *E+00
calorie (20ºC) .......................................................................... joule (J) ......................................................................................... 4.181 900 *E+00
calorie (kilogram, International Table) ....................................... joule (J) ......................................................................................... 4.186 800 *E+03
calorie (kilogram, mean) ........................................................... joule (J) ......................................................................................... 4.190 020 *E+03
calorie (kilogram, thermochemical) ........................................... joule (J) ......................................................................................... 4.184 000 *E+03
electrovolt ................................................................................ joule (J) ......................................................................................... 1.602 190 *E19
erg .......................................................................................... joule (J) ......................................................................................... 1.000 000 *E07
ft lbf ....................................................................................... joule (J) ......................................................................................... 1.355 818 *E+00
ft poundal ............................................................................... joule (J) ......................................................................................... 4.214 011 *E02
kilocalorie (International Table) ................................................. joule (J) ......................................................................................... 4.186 800 *E+03
kilocalorie (mean) ..................................................................... joule (J) ......................................................................................... 4.190 020 *E+03
kilocalorie (thermochemical) ..................................................... joule (J) ......................................................................................... 4.184 000 *E+03
kW h ...................................................................................... joule (J) ......................................................................................... 3.600 000 *E+06
therm ....................................................................................... joule (J) ......................................................................................... 1.055 056 *E+08
ton (nuclear equivalent of TNT) ................................................ joule (J) ......................................................................................... 4.184 020 *E+0920
Page 73
W h ........................................................................................ joule (J) ......................................................................................... 3.600 000 *E+03
W s ........................................................................................ joule (J) ......................................................................................... 1.000 000 *E+00
Page 74
ENERGY PER UNIT AREA TIME

Btu (thermochemical)/ft2s ........................................................ watt per meter2 (W/m2) ................................................................... 1.134 893 *E+04
Btu (thermochemical)/ft2min .................................................... watt per meter2 (W/m2) ................................................................... 1.891 489 *E+02
Btu (thermochemical)/ft2h ........................................................ watt per meter2 (W/m2) ................................................................... 3.152 481 *E+00
Btu (thermochemical)/in2s ....................................................... watt per meter2 (W/m2) ................................................................... 1.634 246 *E+06
cal (thermochemical)/cm min ..................................................
2
watt per meter2 (W/m2) ................................................................... 6.973 333 *E+02
erg/(cm2s) .............................................................................. watt per meter2 (W/m2) ................................................................... 1.000 000 *E+03
W/cm ......................................................................................................................................................
2
watt per meter2 (W/m2) ................................................................... 1.000 000 *E+03
W/in .........................................................................................................................................................
2
watt per meter2 (W/m2) .................................................................. 1.550 003 *E+03
FLOW
(See Mass Per Unit Time or Volume Per Unit Time)
FORCE
dyne ......................................................................................... newton (N) .................................................................................... 1.000 000 *E05
kilogram-force .......................................................................... newton (N) .................................................................................... 9.806 650 *E+00
kilopond .................................................................................... newton (N) .................................................................................... 9.806 650 *E+00
kip (1000lbf) ............................................................................. newton (N) .................................................................................... 4.448 222 *E+03
ounce-force .............................................................................. newton (N) .................................................................................... 2.780 139 *E01
pound-force (lbf)7 ..................................................................... newton (N) .................................................................................... 4.448 222 *E+00
lbf/lb (thrust/weight (mass) ratio) .............................................. newton per kilogram (N/kg) ............................................................ 9.806 650 *E+00
poundal .................................................................................... newton (N) .................................................................................... 1.382 550 *E01
ton-force (2000 lbf) ................................................................... newton (N) .................................................................................... 8.896 444 *E+03
FORCE PER UNIT AREA
(See Pressure)
FORCE PER UNIT LENGTH
lbf/ft .......................................................................................... newton per meter (N/m) ................................................................. 1.459 390 *E+01
lbf/in ......................................................................................... newton per meter (N/m) ................................................................. 1.751 268 *E+02
HEAT
Btu (International Table) ft/h ft2 ºF (k, thermal
conductivity) ....................................................................... watt per meter kelvin (W/m K) ....................................................... 1.730 735 *E+00
Btu (thermochemical) ft/h ft2 ºF (k, thermal
Btu (International Table) in/h ft2 ºF (k, thermal
conductivity) ....................................................................... watt per meter kelvin (W/m K) ....................................................... 1.442 279 *E01
Btu (thermochemical) in/h ft2 ºF (k, thermal
conductivity) ....................................................................... watt per meter kelvin (W/m K) ....................................................... 1.441 314 *E01
Btu (International Table) in/s ft2 ºF (k, thermal
Btu (thermochemical) in/s ft2 ºF (k, thermal
Btu (International Table) ft2 ................................................................................................. joule per meter2 (J/m2) ................................................................... 1.135 653 *E+04
Btu (thermochemical)/ft2 ....................................................................................................... joule per meter2 (J/m2) ................................................................... 1.134 893 *E+04
Btu (International Table) h ft2 ºF (C, thermal
conductance) ...................................................................... watt per meter2 kelvin (W/m2 K) .................................................... 5.678 263 *E+00
Btu (thermochemical)/h ft2 ºF (C, thermal
conductance) ...................................................................... watt per meter2 kelvin (W/m2 K) .................................................... 5.674 466 *E+00
Btu (International Table)/s ft2 ºF ............................................ watt per meter2 kelvin (W/m2 K) .................................................... 2.044 175 *E+04
Btu (thermochemical)/s ft2 ºF ............................................... watt per meter2 kelvin (W/m2 K) .................................................... 2.042 808 *E+04
Btu (International Table)/lb ........................................................ joule per kilogram (J/kg) ................................................................ 2.326 000 *E+03
Btu (thermochemical)/lb ............................................................ watt per kilogram (J/kg) ................................................................. 2.324 444 *E+03
Btu (International Table)/lb ºF (c, heat capacity) ...................... joule per kilogram kelvin (J/kg K) ................................................. 4.186 800 *E+03
Btu (thermochemical)/lb ºF (c, heat capacity) .......................... joule per kilogram kelvin (J/kg K) ................................................. 4.184 000 *E+03
cal (thermochemical)/cm s ºC .............................................. watt per meter kelvin (W/m K) ....................................................... 4.184 000 *E+02
cal (thermochemical)/cm2 .................................................................................................... joule per meter2 (J/m2) ................................................................... 4.184 000 *E+04
cal (thermochemical)/cm2 min ................................................ watt per meter2 (W/m2) ................................................................... 6.973 333 *E+02
cal (thermochemical)/cm2 s .................................................... watt per meter2 (W/m2) ................................................................... 4.184 000 *E+04
Page 75
cal (International Table)/g ......................................................... joule per kilogram (J/kg) ................................................................ 4.186 800 *E+03
cal (thermochemical)/g ............................................................ joule per kilogram (J/kg) ................................................................ 4.186 000 *E+03
Page 76
HEAT (Cont'd)
cal (International Table)/g ºC .................................................. joule per kilogram kelvin (J/kg K) ................................................. 4.186 800 *E+03
cal (thermochemical)/g ºC ..................................................... joule per kilogram kelvin (J/kg K) ................................................. 4.184 000 *E+03
cal (thermochemical)/min ......................................................... watt (W) ......................................................................................... 6.973 333 *E02
cal (thermochemical)/s ............................................................. watt (W) ......................................................................................... 4.184 000 *E+00
clo .......................................................................................... kelvin meter2 per watt (K m2/W) .................................................... 2.003 712 *E01
ºF h ft2/Btu (International Table) (R, thermal resistance) ....... kelvin meter2 per watt (K m2/W) .................................................... 1.761 102 *E01
ºF h ft2/Btu (thermochemical) (R, thermal resistance) ........... kelvin meter2 per watt (K m2/W) .................................................... 1.762 280 *E01
ft2/hl (thermal diffusivity) ............................................................ meter2 per second (m2/s) ............................................................... 2.580 640 *E05
LENGTH
angstrom ................................................................................. meter (m) ...................................................................................... 1.000 000 *E10
astronomical unit2 .................................................................................................................. meter (m) ...................................................................................... 1.495 979 *E+10
caliber (inch) ........................................................................... meter (m) ...................................................................................... 2.540 000 *E02
fathom ...................................................................................... meter (m) ...................................................................................... 1.828 879 *E+00
fermi (femtometer) .................................................................... meter (m) ...................................................................................... 1.000 000 *E15
foot .......................................................................................... meter (m) ...................................................................................... 3.048 000 *E01
foot (U.S. survey)2 .................................................................................................................. meter (m) ...................................................................................... 3.048 006 *E01
inch .......................................................................................... meter (m) ...................................................................................... 2.540 000 *E02
league ..................................................................................... meter (m) ...................................................................................... (see footnote 1)
light year .................................................................................. meter (m) ...................................................................................... 9.460 550 *E+15
microinch ................................................................................. meter (m) ...................................................................................... 2.540 000 *E08
micron ..................................................................................... meter (m) ...................................................................................... 1.000 000 *E06
mil .......................................................................................... meter (m) ...................................................................................... 2.540 000 *E05
mile (international nautical ........................................................ meter (m) ...................................................................................... 1.852 000 *E+03
mile (U.K. nautical) .................................................................. meter (m) ...................................................................................... 1.853 184 *E+03
mile (U.S. nautical) .................................................................. meter (m) ...................................................................................... 1.852 000 *E+03
mile (international) ................................................................... meter (m) ...................................................................................... 1.609 344 *E+03
mile (statute) ............................................................................ meter (m) ...................................................................................... 1.609 384 *E+03
LENGTH (Contd)
mile (U.S. survey)1 ................................................................................................................ meter (m) ...................................................................................... 1.609 347 *E+03
parsec13 .......................................................................................................................................... meter (m) ...................................................................................... 3.085 678 *E+16
pica (printers) ......................................................................... meter (m) ...................................................................................... 4.217 518 *E03
point (printers) ........................................................................ meter (m) ...................................................................................... 3.514 598 *E04
rod ........................................................................................... meter (m) ...................................................................................... (see footnote 1)
yard .......................................................................................... meter (m) ...................................................................................... 9.144 000 *E01
LIGHT
footcandle ................................................................................ lux (lx) ........................................................................................... 1.076 391 *E+01
footlambert ............................................................................... candela per meter2 (cd/m2) ............................................................ 3.426 259 *E+00
lambert ..................................................................................... candela per meter2 (cd/m2) ............................................................ 3.183 099 *E+03
MASS
carat (metric) ........................................................................... kilogram (kg) ................................................................................. 2.000 000 *E04
grain ........................................................................................ kilogram (kg) ................................................................................. 6.479 891 *E05
gram ........................................................................................ kilogram (kg) ................................................................................. 1.000 000 *E03
hundredweight (long) ............................................................... kilogram (kg) ................................................................................. 5.080 235 *E+01
hundredweight (short) .............................................................. kilogram (kg) ................................................................................. 4.535 924 *E+01
kgf s2/m (mass) ...................................................................... kilogram (kg) ................................................................................. 9.806 659 *E+00
ounce (avoirdupois) .................................................................. kilogram (kg) ................................................................................. 2.834 952 *E02
ounce (troy or apothecary) ........................................................ kilogram (kg) ................................................................................. 3.110 348 *E02
pennyweight ............................................................................. kilogram (kg) ................................................................................. 1.555 174 *E03
pound (lb avoirdupois)6 ...................................................................................................... kilogram (kg) ................................................................................. 4.535 924 *E01
pound (troy or apotheary) .......................................................... kilogram (kg) ................................................................................. 3.732 417 *E01
slug ......................................................................................... kilogram (kg) ................................................................................. 1.459 390 *E+01
ton (assay) ............................................................................... kilogram (kg) ................................................................................. 2.916 667 *E02
ton (long, 2240 lb) .................................................................... kilogram (kg) ................................................................................. 1.016 047 *E+03
ton (metric) .............................................................................. kilogram (kg) ................................................................................. 1.000 000 *E+03
Page 77
ton (short, 2000 lb) ................................................................... kilogram (kg) ................................................................................. 9.071 847 *E+02
tonne ........................................................................................ kilogram (kg) ................................................................................. 1.000 000 *E+03
Page 78
MASS PER UNIT AREA

oz/ft2 ........................................................................................ kilogram per meter2 (kg/m2) ........................................................... 3.051 517 *E01
oz/yd2 ...................................................................................... kilogram per meter2 (kg/m2) ........................................................... 3.390 575 *E02
lb/ft2 ......................................................................................... kilogram per meter 2 (kg/m2) ........................................................... 4.882 428 *E+00
MASS PER UNIT CAPACITY
(See Mass Per Unit Volume)
MASS PER UNIT LENGTH
denier ...................................................................................... kilogram per meter (kg/m) .............................................................. 1.111 111 *E07
lb/ft .......................................................................................... kilogram per meter (kg/m) .............................................................. 1.488 164 *E+00
lb/in .......................................................................................... kilogram per meter (kg/m) .............................................................. 1.785 797 *E+01
tex ............................................................................................ kilogram per meter (kg/m) .............................................................. 1.000 000 *E06
MASS PER UNIT TIME
(Includes Flow)
perm (0º C) .............................................................................. kilogram per pacsal second meter2 (kg/Pa s m2) ........................ 5.721 350 *E07
perm (23º C) ............................................................................ kilogram per pacsal second meter2 (kg/ Pa s m2) ...................... 5.745 250 *E11
perm in (0º C) ........................................................................ kilogram per pacsal second meter (kg/ Pa s m) .......................... 1.453 220 *E12
perm (23º C) .......................................................................... kilogram per pacsal second meter (kg/ Pa s m) .......................... 1.459 290 *E12
lb/h .......................................................................................... kilogram per second (kg/s) ............................................................ 1.259 290 *E12
lb/min ....................................................................................... kilogram per second (kg/s) ............................................................ 7.559 873 *E03
lb/s .......................................................................................... kilogram per second (kg/s) ............................................................ 4.535 924 *E01
lb/hp h (SFC, specific fuel consumption .................................. kilogram per joule (kg/J) ................................................................ 1.689 659 *E07
ton (short)/h ............................................................................. kilogram per second (kg/s) ............................................................ 2.519 958 *E01
MASS PER UNIT VOLUME
(Includes Desnity and Mass Capacity)
grain (lb avoirdupois/7000)/gal (U.S. liquid) ............................. kilogram per meter3 (kg/m3) ........................................................... 1.711 806 *E02
g/cm3 ................................................................................................................................................ kilogram per meter3 (kg/m3) ........................................................... 1.000 000 *E+03
oz (avoirdupois)/gal (U.K. liquid) ............................................. kilogram per meter 3 (kg/m3) ........................................................... 6.236 021 *E+00
oz (avoirdupois)/gal (U.S. liquid) ............................................. kilogram per meter 3 (kg/m3) ........................................................... 7.489 152 *E+00
oz (avoirdupois)/in3 ............................................................................................................... kilogram per meter3 (kg/m3) ........................................................... 1.729 994 *E+03
lb/ft3 .................................................................................................................................................... kilogram per meter3 (kg/m3) ........................................................... 1.601 846 *E+01
lb/in ...................................................................................................................................................
3 kilogram per meter3 (kg/m3) ........................................................... 2.767 990 *E+04
lb/gal (U.K. liquid) ................................................................... kilogram per meter3 (kg/m3) ........................................................... 9.977 633 *E+01
lb/gal (U.S. liquid) ................................................................... kilogram per meter3 (kg/m3) ........................................................... 1.198 264 *E+02
lb/yd3 .................................................................................................................................................. kilogram per meter3 (kg/m3) ........................................................... 5.932 764 *E01
slug/ft3 ............................................................................................................................................. kilogram per meter3 (kg/m3) ........................................................... 5.153 788 *E+02
ton (long)/yd ..............................................................................................................................
3 kilogram per meter3 (kg/m3) ........................................................... 1.328 939 *E+03
ton (short)/yd3 ............................................................................................................................ kilogram per meter3 (kg/m3) ........................................................... 1.186 553 *E+03
POWER
Btu (International Table)/h ......................................................... watt (W) ......................................................................................... 2.930 711 *E01
Btu (International Table)/s ......................................................... watt (W) ......................................................................................... 1.055 056 *E+03
Btu (thermochemical)/h ............................................................ watt (W) ......................................................................................... 2.928 751 *E01
Btu (thermochemical)/min ......................................................... watt (W) ......................................................................................... 1.757 250 *E+01
Btu (thermochemical)/s ............................................................ watt (W) ......................................................................................... 1.054 350 *E+03
cal (thermochemical)/min ......................................................... watt (W) ......................................................................................... 6.973 333 *E02
cal (thermochemical)/s ............................................................. watt (W) ......................................................................................... 4.184 000 *E+00
erg/s ........................................................................................ watt (W) ......................................................................................... 1.000 000 *E07
ft lbf/h ..................................................................................... watt (W) ......................................................................................... 3.766 161 *E04
ft lbf/min ................................................................................. watt (W) ......................................................................................... 2.259 697 *E02
ft lbf/s ..................................................................................... watt (W) ......................................................................................... 1.355 818 *E+00
horsepower (550 ft lbf/s) ......................................................... watt (W) ......................................................................................... 7.456 999 *E+02
Page 79
horsepower (boiler) .................................................................. watt (W) ......................................................................................... 9.809 500 *E+03
horsepower (electric) ............................................................... watt (W) ......................................................................................... 7.460 000 *E+02
Page 80
POWER (Contd)
horsepower (metric) ................................................................. watt (W) ......................................................................................... 7.354 999 *E+02
horsepower (water) .................................................................. watt (W) ......................................................................................... 7.460 430 *E+02
horsepower (U.K.) .................................................................... watt (W) ......................................................................................... 7.457 000 *E+02
kilocalorie (thermochemical)/min .............................................. watt (W) ......................................................................................... 6.973 333 *E+01
kilocalorie (thermochemical)/s .................................................. watt (W) ......................................................................................... 4.184 000 *E+03
ton (refrigeration) ..................................................................... watt (W) ......................................................................................... 3.516 800 *E+03
PRESSURE OR STRESS
(Force Per Unit Area)
atmosphere (standard) ............................................................. pascal (Pa) .................................................................................... 1.013 250 *E+05
atmosphere (technical = 1 kgf/cm2) ........................................... pascal (Pa) .................................................................................... 9.806 650 *E+04
bar ........................................................................................... pascal (Pa) .................................................................................... 1.000 000 *E+05
centimeter of mercury (º C) ....................................................... pascal (Pa) .................................................................................... 1.333 222 *E+03
centimeter of water (4º C) ......................................................... pascal (Pa) .................................................................................... 9.806 382 *E+01
dyne/cm2 ......................................................................................................................................... pascal (Pa) .................................................................................... 1.000 000 *E01
foot of water (39.2º F) ............................................................... pascal (Pa) .................................................................................... 2.988 982 *E+03
gram-force/cm2 ........................................................................................................................ pascal (Pa) .................................................................................... 9.806 650 *E+01
inch of mercury (32º F) ............................................................. pascal (Pa) .................................................................................... 3.386 382 *E+03
inch of mercury (60º F) ............................................................. pascal (Pa) .................................................................................... 3.376 852 *E+03
inch of water (39.2º F) .............................................................. pascal (Pa) .................................................................................... 2.490 822 *E+02
inch of water (60º F) ................................................................. pascal (Pa) .................................................................................... 2.488 422 *E+02
kgf/cm2 ............................................................................................................................................. pascal (Pa) .................................................................................... 9.806 650 *E+04
kgf/m2 ................................................................................................................................................ pascal (Pa) .................................................................................... 9.806 650 *E+00
kgf/mm2 ........................................................................................................................................... pascal (Pa) .................................................................................... 9.806 650 *E+06
kip/in2 (ksi) ............................................................................... pascal (Pa) .................................................................................... 6.894 757 *E+06
millibar ..................................................................................... pascal (Pa) .................................................................................... 1.000 000 *E+02
millimeter of mercury (0º C) ...................................................... pascal (Pa) .................................................................................... 1.333 227 *E+02
poundal/ft2 ..................................................................................................................................... pascal (Pa) .................................................................................... 1.488 164 *E+00
lbf/ft2 ................................................................................................................................................... pascal (Pa) .................................................................................... 4.788 026 *E+01
PRESSURE OR STRESS (Contd)
lbf/in2 (psi) ............................................................................... pascal (Pa) .................................................................................... 6.894 757 *E+03
psi ........................................................................................... pascal (Pa) .................................................................................... 6.894 757 *E+03
torr (mm Hg, 0º C) ................................................................... pascal (Pa) .................................................................................... 1.333 227 *E+02
SPEED
(See Velocity)
STRESS
(See Pressure)
TEMPERATURE
degree Celsius ........................................................................ kelvin (K) ....................................................................................... tK = toC + 273.15
degree Fahrenheit .................................................................... degree Celsius .............................................................................. toC = (toF 32)/1.8
degree Fahrenheit .................................................................... kelvin (K) ....................................................................................... tK = (toF 459.67)/1.8
degree Rankine ........................................................................ kelvin (K) ....................................................................................... tK = toR/1.8
kelvin ........................................................................................ degree Celsium ............................................................................. toc = tK 273.15
TIME
day (mean solar) ...................................................................... second (s) ..................................................................................... 8.640 000 *E+04
day (sidereal) ........................................................................... second (s) ..................................................................................... 8.616 409 *E+04
hour (mean solar) ..................................................................... second (s) ..................................................................................... 3.600 000 *E+03
day (sidereal) ........................................................................... second (s) ..................................................................................... 3.590 170 *E+03
minute (mean solar) ................................................................. second (s) ..................................................................................... 6.000 000 *E+01
minute (sidereal) ...................................................................... second (s) ..................................................................................... 5.983 617 *E+01
month (mean calendar) ............................................................. second (s) ..................................................................................... 2.628 000 *E+06
second (sidereal) ..................................................................... second (s) ..................................................................................... 9.972 696 *E01
year (365 days) ......................................................................... second (s) ..................................................................................... 3.153 600 *E+07
Page 81
year (sidereal ........................................................................... second (s) ..................................................................................... 3.155 815 *E+07
year (tropical) ........................................................................... second (s) ..................................................................................... 3.155 693 *E+07
Page 82
TORQUE
(See Bending Moment)
VELOCITY
(Includes Speed)
ft/h ........................................................................................... meter per second (m/s) .................................................................. 8.466 667 *E05
ft/min ........................................................................................ meter per second (m/s) .................................................................. 5.080 000 *E03
ft/s ........................................................................................... meter per second (m/s) .................................................................. 3.048 000 *E01
in/s .......................................................................................... meter per second (m/s) .................................................................. 2.540 000 *E02
km/h ......................................................................................... meter per second (m/s) .................................................................. 2.777 778 *E01
knot (international) .................................................................... meter per second (m/s) .................................................................. 5.144 444 *E01
mi/h (international) ................................................................... meter per second (m/s) .................................................................. 4.470 400 *E01
mi/min (international) ................................................................ meter per second (m/s) .................................................................. 2.682 240 *E+01
mi/s (international) ................................................................... meter per second (m/s) .................................................................. 1.609 344 *E+03
mi/h (international) ................................................................... kilometer per hour (km/h)* .............................................................. 1.609 344 *E+00
VISCOSITY
centipoise ................................................................................ pascal second (Pa s) ................................................................... 1.000 000 *E03
centistokes ............................................................................... meter2 per second (m2/s) ............................................................... 1.000 000 *E06
ft2/s .......................................................................................... meter2 per second (m2/s) ............................................................... 9.290 304 *E02
poise ........................................................................................ pascal second (Pa s) ................................................................... 1.000 000 *E01
poundal s/ft2 ............................................................................................................................. pascal second (Pa s) ................................................................... 1.488 164 *E+00
lb/ft h ..................................................................................... pascal second (Pa s) ................................................................... 4.133 789 *E04
lb/ft s ..................................................................................... pascal second (Pa s) ................................................................... 1.488 164 *E+00
lb/ft h2 ............................................................................................................................................ pascal second (Pa s) ................................................................... 4.788 026 *E01
lbf in2 ............................................................................................................................................. pascal second (Pa s) ................................................................... 6.894 757 *E+03
rhe ........................................................................................... 1 per pascal second (1/Pa s) ....................................................... 1.000 000 *E+01
slug/ft s ................................................................................. pascal second (Pa s) ................................................................... 4.788 026 *E+01
stokes ...................................................................................... meter2 per second (m2/s) ............................................................... 1.000 000 *E04
* Although speedometers may read km/h, the correct SI unit is m/s.
VOLUME
(Includes Capacity)
acre-foot (U.S. survey)1 .................................................................................................... meter3 (m3) .................................................................................... 1.233 489 *E+03
barrel (oil, 42 gal) .................................................................... meter3 (m3) .................................................................................... 1.589 873 *E01
board foot ................................................................................. meter3 (m3) .................................................................................... 2.359 737 *E03
bushel (U.S.) ........................................................................... meter3 (m3) .................................................................................... 3.523 907 *E02
cup .......................................................................................... meter3 (m3) .................................................................................... 2.365 882 *E04
fluid ounce (U.S.) ..................................................................... meter3 (m3) .................................................................................... 2.957 353 *E05
ft3 .......................................................................................................................................................... meter3 (m3) .................................................................................... 2.831 685 *E02
gallon (Canadian liquid) ........................................................... meter3 (m3) .................................................................................... 4.546 090 *E03
gallon (U.K. liquid) .................................................................. meter 3 (m3) .................................................................................... 4.546 092 *E03
gallon (U.S. dry) ...................................................................... meter 3 (m3) .................................................................................... 4.404 884 *E03
gallon (U.S. liquid) .................................................................. meter 3 (m3) .................................................................................... 3.785 412 *E03
gill (U.K.) ................................................................................ meter3 (m3) .................................................................................... 1.420 654 *E04
gill (U.S.) ................................................................................ meter3 (m3) .................................................................................... 1.182 941 *E04
in3 (U.K.) ................................................................................. meter3 (m3) .................................................................................... 1.638 706 *E05
litre (see footnote 5) ................................................................. meter3 (m3) .................................................................................... 1.000 000 *E03
ounce (U.K. fluid) ..................................................................... meter3 (m3) .................................................................................... 2.841 307 *E05
ounce (U.S. fluid) ..................................................................... meter3 (m3) .................................................................................... 2.957 353 *E05
peck (U.S.) ............................................................................... meter3 (m3) .................................................................................... 8.809 768 *E03
pint (U.S. dry) ........................................................................... meter3 (m3) .................................................................................... 5.506 105 *E04
pint (U.S. liquid) ...................................................................... meter3 (m3) .................................................................................... 4.731 765 *E04
quart (U.S. dry) ........................................................................ meter3 (m3) .................................................................................... 1.101 221 *E03
quart (U.S. liquid) .................................................................... meter3 (m3) .................................................................................... 9.463 529 *E04
stere ........................................................................................ meter3 (m3) .................................................................................... 1.000 000 *E+00
tablespoon ................................................................................ meter3 (m3) .................................................................................... 1.478 676 *E05
teaspoon .................................................................................. meter3 (m3) .................................................................................... 4.928 922 *E06
ton (register) ........................................................................... meter3 (m3) .................................................................................... 2.831 685 *E+00
Page 83
yd3 ........................................................................................................................................................ meter3 (m3) .................................................................................... 7.645 549 *E01
Page 84
VOLUME PER UNIT TIME
(Includes Flow)
ft3/min ...................................................................................... meter3 per second (m3/s) ............................................................... 4.719 474 *E04
ft3/s .......................................................................................... meter3 per second (m3/s) ............................................................... 2.831 685 *E02
gallon (U.S. liquid)/hp h (SFC, specific fuel consumption ....... meter3 per joule (m3/J) .................................................................. 1.410 089 *E09
in /min .....................................................................................
3 meter3 per second (m3/s) ............................................................... 2.731 177 *E07
yd3/min ..................................................................................... meter3 per second (m3/s) ............................................................... 1.274 258 *E02
gallon (U.S. liquid) per day ....................................................... meter3 per second (m3/s) ............................................................... 4.381 264 *E08
gallon (U.S. liquid) per minute .................................................. meter3 per second (m3/s) ............................................................... 6.309 020 *E05
WORK
(See Energy)
(1) Units and Systems of Weights and Meausres. Their Origin, (5) McNish, A G, The International System of Units, Materials Re-
Development, and Present Status, NBS Letter Circ, LC 1035, January search and Standards, Am, Soc, Testing Mats., Vol. 5, No. 10, October
1960, amended January 1976. 1965.
(2) NBS Guidelines for Use of the Metric System, NBS LC 1056, August (6) Changing to the Metric System, Conversion Factors, Symbols,
1975. Definitions, Nat. Physical Lab., Her Majestys Stationery Office,
(3) ChartThe Modernized Metric System NBS Spec. Publ. 304, London, England, 1965.
1972. (7) Metric Standards for Engineering, British Standard Handbook No. 18
(4) Mechtly, E A, The International System of UnitsPhysical Constants (1972).
and Conversion Factors, National Aeronautics and Space Adminis- (8) Hvistendahl, H S, Engineering Units and Physical Quantities,
tration, Publication SP-7012. Available from Superintendent of Docu- Macmillan and Co. Ltd., London, 1964.
ments, U.S. Government Printing Office, Washington, D.C. 20402.
Page 85
CONVERSION CONSTANTS
MULTIPLY BY AND OBTAIN
Barrels x 5.6146 = Cu. Ft.
Barrels x 9702 = Cu. In.
Barrels x 42.0 = Gal.
Cu. Ft. x 1728 = Cu. In.
Cu. Ft. x 0.037037 = Cu. Yd.
Cu. Ft. x 7.4805 = Gal.
Cu. Ft. x 0.1781 = Bbls. (42 Gal.)
Cu. Ft./Min. x 0.1781 = Bbls./Min.
Cu. Ft./Min. x 10.686 = Bbls./Hr.
Cu. Ft.Water x 62.31* = Pounds
Cu. In. x 0.0005787 = Cu. Ft.
Cu. In. x 0.004329 = Gal.
Cu. In. x 0.0001031 = Bbls.
Cu. Yd. x 27.0 = Cu. Ft.
Cu. Yd. x 201.977 = Gal.
Gal.Water x 8.33* = Pounds
Gal. x 0.13368 = Cu. Ft.
Gals./Lb. x 8.345 = Litres/Kg.
Lbs./Gal. x 0.119839 = Kg./Litres
Specific Gravity x 62.42 = Lbs./Cu. Ft.
Specific Gravity x 8.345 = Lbs./Gal.
Feet x 0.3048 = Metres
Feet x 3.048 = Decimeters
Feet x 30.48 = Centimeters
Inch x 2.54 = Centimeters
Inch x 25.4 = Millimeters
Miles x 5280 = Feet
Miles/Hr. x 1.4666 = Ft./Sec.
Sq. In. x 0.006944 = Sq. Ft.
Sq. Ft. x 144 = Sq. In.
PoundsWater x 0.12005* = Gal.Water
PoundsWater x 0.016048* = Cu. Ft. Water
Horsepower x 33000 = Ft. Lbs./Min.
Horsepower x 550 = Ft. Lbs./Sec.
Square of Dia. x 0.7854 = Area of Circle
*Water at 20ºC, (68ºF.)

**Water at 4°C. (39.2°F.)
Page 86
FRACTIONAL INCHES
TO: DECIMAL INCHES/MILLIMETERS
Fractional Decimal Fractional Decimal
Inches Inches Millimeters Inches Inches Millimeters
17/32 .531250 13.49375
1/1000 .001000 0.02540 35/64 .546875 13.89063
2/1000 .002000 0.05080
3/1000 .003000 0.07620 9/16 .562500 14.28750
37/64 .578125 14.68437
4/1000 .004000 0.10160 19/32 .593750 15.08125
5/1000 .005000 0.12700 39/64 .609375 15.47813
6/1000 .006000 0.15240
5/8 .625000 15.87500
7/1000 .007000 0.17780 41/64 .640625 16.27187
8/1000 .008000 0.20320 21/32 .656250 16.66875
9/1000 .009000 0.22860 43/64 .671875 17.06563
10/1000 .010000 0.25400 11/16 .687500 17.46250
15/1000 .015000 0.38100 45/64 .703125 17.85937
1/64 .015625 0.39687 23.32 .718750 18.25625
1/32 .031250 0.79375 47/64 .734375 18.65313
3/64 .046875 1.19061 3/4 .750000 19.05000
1/16 .062500 1.58750 49/64 .765625 19.44687
5/64 .078125 1.98437 25/32 .781250 19.84375
3/32 .093750 2.38125 51/64 .796875 20.24063
7/64 .109375 2.77813 13/16 .812500 20.63750
1/8 .125000 3.17500 53/64 .828125 21.03437
9/64 .140625 3.57187 27/32 .843750 21.43125
5/32 .156250 3.96875 55/64 .859375 21.82813
11/64 .171875 4.36563 7/8 .875000 22.22500
3/16 .187500 4.76250 57/64 .890625 22.62187
13/64 .203125 5.15937 29/32 .906250 23.01875
7/32 .218750 5.55625 59/64 .921875 23.41563
15/64 .234375 5.95313 15/16 .937500 23.81250
1/4 .250000 6.35000 61/64 .953125 24.20937
17/64 .265625 6.74687 31/32 .968750 24.60625
9/32 .281250 7.14375 63/64 .984375 25.00313
19/64 .296875 7.54063 1 in. 11.0 in. 25.40000
5/16 .312500 7.93750 2 in. 12.0 in. 50.80000
21/64 .328125 8.33437 3 in. 13.0 in. 76.20000
11/32 .343750 8.73125 4 in. 14.0 in. 101.60000
23/64 .359375 9.12813 5 in. 15.0 in. 127.00000
3/8 .375000 9.52500 6 in. 16.0 in. 152.40000
25/64 .390625 9.92187 7 in. 17.0 in. 177.80000
13/32 .406250 10.31875 8 in. 18.0 in. 203.20000
27/64 .421875 10.71563 9 in. 19.0 in. 228.60000
7/16 .437500 11.11250 10 in. 10.0 in. 254.00000
29/64 .453125 11.50938 11 in. 11.0 in. 279.40000
15/32 .468750 11.90625 12 in. 12.0 in. 304.80000
31/64 .484375 12.30313
13 in. 13.0 in. 330.20000
1/2 .500000 12.70000 14 in. 14.0 in. 355.60000
33/64 .515625 13.09687 15 in. 15.0 in. 381.00000
Page 87
Page 88
Page 89
Page 90

English / Metric Units: Halliburton Technical Data

Uploaded by

Copyright:

Available Formats

English / Metric Units: Halliburton Technical Data

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

English / Metric Units: Halliburton Technical Data

Uploaded by

Copyright:

Available Formats

Back to Main Menu

ENGLISH / METRIC UNITS

Copyright © 1985 , 1999, 2001

ALL RIGHTS RESERVED

Depth Conversion Table ......................................... 57

USEFUL DATA TO CALCULATE

To find the circumference of a circle multiply the diameter by

To find the diameter of a circle divide the circumference by

The radius of a circle is one-half the diameter.

2. Square Measurement (Area):

To find the area of a square multiply the length by the width.

To find the area of a ractangle multiply the length by the

To find the area of a circle multiply one-half the diameter

To find the vertical surface area of a cylinder standing on

To find the surface area of a sphere multiply the circumfer-

3. Cubic Measurement (Volume, capacity and displacement):

To find the volume of a cube or ractangular solid multiply the

To find the volume, capacity or displacement of a square or

To find the volume, capacity or displacement of a cylinder

To find the volume, capacity or displacement of a sphere or

SURFACE AREA = 3.14 x D2

WEIGHTS AND MEASURES

1 U.S. gal equals ........................... { 231 Cu. In.  3785.4 cm3.

DEVIATED WELL CALCULATIONS

The cosine is the ratio of the True Vertical Depth (TVD)

800 ft x 0.8660 x 0.5922 psi/ft = 410.2762 psi

DEVIATED WELL CALCULATIONS

Percent of Percent of Percent of

Courtesy of Missouri Water Well & Pump Contractors Assn., Inc.

EQUATIONS FOR CALCULATING

Barrels per lineal foot = .0009714 x D2

EQUATIONS FOR VOLUME AND HEIGHT

EQUATIONS FOR VOLUME AND HEIGHT

BALANCE CEMENT PLUG JOB

EQUALIZATION POINT FORMULA

N = Cu. Ft. of Cement slurry used.

6.0 .9083 11.0 .8319 16.0 .7555

7.0 .8930 12.0 .8166 17.0 .7402

8.0 .8778 13.0 .8013 18.0 .7249

STRETCH DATA FOR DRILL PIPE,

FORMULA FOR DETERMINING STRETCH IN PIPE

FORMULA FOR DETERMINING PULL OF PIPE

FORMULA FOR FREE PIPE DEPTH

Where: L = Length of free pipe in feet.

STRETCH DATA FOR DRILL PIPE,

C = .31 (C factor from table at 1000 ft.)

SLACK-OFF DATA FOR TUBING

1.900 O.D. EUE Tubing 0.68

Desired Weight Packer Depth

EFFECT OF TEMPERATURE ON STEEL

Steel expands or contracts .0000828 per foot per degree (F)

HYDROSTATIC PRESSURE AND FLUID

HYDROSTATIC PRESSURE AND FLUID WEIGHT

* Density of water at 20ºC.or 68ºF.

10.5 78.55 1.26 0.5455 1.258 12.340

19.5 145.87 2.34 1.0130 2.337 22.915

020 9.7 10.6 11.4 12.2 13.1 13.7 14.7 15.6

040 9.5 10.2 10.9 11.7 12.4 13.1 13.8 14.5

070 9.3 9.9 10.5 11.1 11.7 12.2 12.8 13.4

1 U.S. gal equals ........................... { 231 Cu. In. 3785.4 cm3.

Steel expands or contracts .0000828 per foot per degree (F)

(From Principles of Drilling Mud Control Eleventh Edition)

16.0 A 8.33A = 127.84 - 82.864