Chapter11 001

Page
11-1
Standard Cost and
Balance Scorecard
Managerial Accounting
Fifth Edition
Weygandt Kimmel Kieso
Page
11-2
study objectives
1. Distinguish between a standard and a budget.
2. Identify the advantages of standard costs.
3. Describe how companies set standards.
4. State the formulas for determining direct materials and
direct labor variances.
5. State the formula for determining the total manufacturing
overhead variance.
6. Discuss the reporting of variances.
7. Prepare an income statement for management under a
standard costing system.
8. Describe the balanced scorecard approach to performance
Page
evaluation.
11-3
preview of chapter 11
Page
11-4
The Need for Standards
Distinguishing between Standards and Budgets

Both standards and budgets are predetermined
costs, and both contribute to management planning
and control.
There is a difference:
A standard is a unit amount.
A budget is a total amount
Page
11-5 SO 1 Distinguish between a standard and a budget.
The Need for Standards
Advantages of Standard Costs Illustration 11-1
Facilitate management Promote greater economy Useful in setting selling

planning by making employees more prices
“cost-conscious”
Contribute to management Useful in highlighting Simplify costing of

control by providing basis variances in management inventories and reduce
for evaluation of cost by exception clerical costs
control
Page
11-6 SO 2 Identify the advantages of standard costs.
Setting Standard Costs—a Difficult Task
Setting standard costs requires input from all

persons who have responsibility for costs and
quantities.
Standards should change whenever managers

determine that the existing standard is not a
good measure of performance.
Page
11-7 SO 3 Describe how companies set standards.
Ideal versus Normal Standards

Companies set standards at one of two levels:
Ideal standards represent optimum levels of
performance under perfect operating conditions.
Normal standards represent efficient levels of

performance that are attainable under expected
operating conditions.
Properly set, normal standards should be rigorous but

attainable.
Page
Question
Most companies that use standards set them at a(n):
a. optimum level.
b. ideal level.
c. normal level.
d. practical level.
Solution on
Page
11-9
notes page SO 3 Describe how companies set standards.
Page
11-10
A Case Study
To establish the standard cost of producing a product,
it is necessary to establish standards for each
manufacturing cost element—
 direct materials,
 direct labor, and
 manufacturing overhead.
The standard for each element is derived from the

standard price to be paid and the standard quantity to
be used.
Page
Direct Materials
The direct materials price standard is the cost per unit
of direct materials that should be incurred.
Illustration 11-2
Page
Direct Materials
The direct materials quantity standard is the quantity of
direct materials that should be used per unit of finished
goods.
Illustration 11-3
The standard direct materials cost is $12.00 ($3.00 x 4.0 pounds).

Page
Review Question
The direct materials price standard should include an
amount for all of the following except:
a. receiving costs.
b. storing costs.
c. handling costs.
d. normal spoilage costs.
Solution on
Page
11-14
Direct Labor
The direct labor price standard is the rate per hour that
should be incurred for direct labor.
Illustration 11-4
Page
Direct Labor
The direct labor quantity standard is the time that
should be required to make one unit of the product.
Illustration 11-5
The standard direct labor cost is $20 ($10.00 x 2.0 hours).

Page
Manufacturing Overhead
For manufacturing overhead, companies use a
standard predetermined overhead rate in setting
the standard.
This overhead rate is determined by dividing
budgeted overhead costs by an expected standard
activity index, such as standard direct labor hours or
standard machine hours.
Page
Manufacturing Overhead
The company expects to produce 13,200 gallons during the
year at normal capacity. It takes 2 direct labor hours for
each gallon.
Illustration 11-6
Standard manufacturing overhead rate per gallon is $10

($5 x 2 hours).
Page
Total Standard Cost Per Unit

The total standard cost per unit is the sum of the standard
costs of direct materials, direct labor, and manufacturing
overhead.
Illustration 11-7
The total standard cost per gallon is $42.

Page
Ridette Inc. accumulated the following standard
cost data concerning product Cty31.
 Materials per unit: 1.5 pounds at $4 per pound.
 Labor per unit: 0.25 hours at $13 per hour.
 Manufacturing overhead: Predetermined rate is 120% of
direct labor cost.
Compute the standard cost of one unit of product Cty31.
Page Solution on
11-20 notes page SO 3
Page
11-21
Analyzing and Reporting Variances From
Standards
One of the major management uses of standard

costs is to identify variances from standards.
Variances are the differences between total actual
costs and total standard costs.
Page
Analyzing and Reporting Variances
Question
A variance is favorable if actual costs are:
a. less than budgeted costs.
b. less than standard costs.
c. greater than budgeted costs.
d. greater than standard costs
Solution on
Page
11-23
When actual costs exceed standard costs, the

variance is unfavorable.
When actual costs are less than standard costs, the

variance is favorable.
To interpret properly the significance of a variance,

you must analyze it to determine the underlying
factors. Analyzing variances begins by determining
the cost elements that comprise the variance.
Page
Illustration: Assume that in producing 1,000 gallons of
Weed-O in the month of June, Xonic, Inc. incurred the
following costs.
Illustration 11-8
The total standard cost of Illustration 11-9
Weed-O is $42,000 (1,000

gallons x $42). Thus, total
variance is $2,500.
Page SO 4 State the formulas for determining direct

11-25
materials and direct labor variances.
Direct Materials Variances

In completing the order for 1,000 gallons of Weed-O, Xonic
used 4,200 pounds of direct materials. These were
purchased at a cost of $3.10 per unit. Standard price is $3.
Illustration 11-10
Actual Quantity Standard Quantity Total Materials

x Actual Price - x Standard Price = Variance
(AQ) x (AP) (SQ) x (SP) (TMV)
$13,020 $12,000
(4,200 x $3.10)
-
(4,000 x $3.00) = $1,020 U
Solution on
Page
notes page SO 4 State the formulas for determining direct
11-26

Next, the company analyzes the total variance to
determine the amount attributable to price (costs) and to
quantity (use). The materials price variance is computed
from the following formula.
Illustration 11-11
Actual Quantity Actual Quantity Materials Price

x Actual Price - x Standard Price = Variance
(AQ) x (AP) (AQ) x (SP) (MPV)
$13,020 $12,600
(4,200 x $3.10)
-
(4,200 X $3.00) = $420 U
Solution on
Page
11-27

The materials quantity variance is determined from the
following formula. Illustration 11-12
Materials
Actual Quantity Standard Quantity
Quantity
x Standard Price - x Standard Price =
Variance
(AQ) x (SP) (SQ) x (SP)
(MQV)
$12,600 $12,000
(4,200 X $3.00)
-
(4,000 x $3.00) = $600 U
Companies sometimes use a matrix to analyze a variance.
Solution on
Page
11-28
Matrix for Direct Materials Variances
1 2 3
Actual Quantity Actual Quantity Standard Quantity

× Actual Price × Standard Price × Standard Price
(AQ) × (AP) (AQ) × (SP) (SQ) × (SP)
4,200 x $3.10 = $13,020 4,200 x $3.00 = $12,600 4,000 x $3.00 = $12,000
Price Variance Quantity Variance

1 - 2 2 - 3
$13,020 – $12,600 = $420 U $12,600 – $12,000 = $600 U
Total Variance
1 - 3
Illustration 11-14 $13,020 – $12,000 = $1,020 U

11-29
Causes of Material Variances
Materials price variance – factors that affect the price

paid for raw materials include the availability of quantity
and cash discounts, the quality of the materials
requested, and the delivery method used. To the extent
that these factors are considered in setting the price
standard, the purchasing department is responsible
Materials quantity variance – if the variance is due to

inexperienced workers, faulty machinery, or
carelessness, the production department is responsible.

11-30
The standard cost of Product XX includes two
units of direct materials at $8.00 per unit.
During July, the company buys 22,000 units of direct
materials at $7.50 and uses those materials to produce 10,000
units. Compute the total, price, and quantity variances for
materials.
Page Solution on SO 4 State the formulas for determining direct

notes page
11-31
Direct Labor Variances
In completing the Weed-O order, Xonic, Inc. incurred
2,100 direct labor hours at an average hourly rate of
$9.80. The standard hours allowed for the units produced
were 2,000 hours (1,000 gallons x 2 hours). The standard
labor rate was $10 per hour. The total labor variance is
computed as follows. Illustration 11-15
(2,100 x $9.80) - (2,000 x $10.00) = $580 U

notes page
11-32

Next, the company analyzes the total variance to
determine the amount attributable to price (costs) and to
quantity (use). The labor price variance is computed from
the following formula.
Illustration 11-16
(2,100 x $9.80) - (2,100 x $10.00) = $420 F

notes page
11-33

The labor quantity variance is determined from the
following formula.
Illustration 11-17
(2,100 x $10.00) - (2,000 x $10.00) = $1,000 U
Companies sometimes use a matrix to analyze a variance.

notes page
11-34
Matrix for Direct Labor Variances
1 2 3
Actual Hours Actual Hours Standard Hours

× Actual Rate × Standard Rate × Standard Rate
(AH) × (AR) (AH) × (SR) (SH) × (SR)
2,100 x $9.80 = $20,580 2,100 x $10.00 = $21,000 2,000 x $10.00 = $20,000
Price Variance Quantity Variance

1 - 2 2 - 3
$20,580 – $21,000 = $420 F $21,000 – $20,000 = $1,000 U
Total Variance
1 - 3
Illustration 11-19 $20,580 – $20,000 = $580 U

11-35
Causes of Labor Variances
Labor price variance – usually results from two factors:

(1) paying workers different wages than expected, and
(2) misallocation of workers. The manager who
authorized the wage increase is responsible for the
higher wages. The production department generally is
responsible for labor price variances resulting from
misallocation of the workforce.
Labor quantity variances - relates to the efficiency
of workers. The cause of a quantity variance generally
can be traced to the production department.
11-36
Manufacturing Overhead Variances

Manufacturing overhead variances involves total overhead
variance, overhead controllable variance, and overhead
volume variance.
Manufacturing overhead costs are applied to work in
process on the basis of the standard hours allowed for
the work done.
Page SO 5 State the formula for determining the

11-37
total manufacturing overhead variance.
Total Overhead Variance

The total overhead variance is the difference between actual
overhead costs and overhead costs applied to work done. The
computation of the actual overhead is comprised of a variable
and a fixed component.
Illustration 11-20
The predetermined rate for Weed-O is $5, comprised of a variable

overhead rate of $3 and a fixed rate of $2.
11-38

The formula for the total overhead variance and the calculation
for Xonic, Inc. for the month of June.
Illustration 11-21

11-39
The overhead variance is generally analyzed through a

price variance and a quantity variance.
Overhead controllable variance (price variance) shows

whether overhead costs are effectively controlled.
Overhead volume variance (quantity variance) relates to

whether fixed costs were under- or over-applied during
the year.

11-40
The standard cost of Product YY includes 3
hours of direct labor at $12.00 per hour. The
predetermined overhead rate is $20.00 per direct labor hour.
During July, the company incurred 3,500 hours of direct labor at
an average rate of $12.40 per hour and $71,300 of manufacturing
overhead costs. It produced 1,200 units. (a) Compute the total,
price, and quantity variances for labor. (b) Compute the total
overhead variance.
Page
11-41 Solution on notes page SO 5
Reporting Variances
All variances should be reported to appropriate levels
of management as soon as possible.
The form, content, and frequency of variance reports

vary considerably among companies.
Facilitate the principle of ―management by

exception.‖
Top management normally looks for significant

variances.
Page
11-42 SO 6 Discuss the reporting of variances.
Reporting Variances
Materials price variance report for Xonic, Inc., with the
materials for the Weed-O order listed first.
Illustration 11-22
Page
11-43 SO 6 Discuss the reporting of variances.
Statement Illustration 11-23
Presentation
of Variances
In income statements
prepared for
management under a
standard cost
accounting system,
cost of goods sold is
stated at standard
cost and the
variances are
disclosed separately.
Page SO 7 Prepare an income statement for management

11-44
under a standard costing system.
Review Question
Which of the following is incorrect about variance
reports?
a. They facilitate ―management by exception‖.
b. They should only be sent to the top level of
management.
c. They should be prepared as soon as possible.
d. They may vary in form, content, and frequency
among companies.
Solution on
Page
notes page SO 7 Prepare an income statement for management
11-45
under a standard costing system.
Balanced Scorecard
The balanced scorecard incorporates financial and

nonfinancial measures in an integrated system that links
performance measurement and a company’s strategic goals.
The balanced scorecard evaluates company performance

from a series of ―perspectives.‖ The four most commonly
employed perspectives are as follows.
Page
11-46 SO 8 Describe the balanced scorecard approach to performance evaluation.
Balanced Scorecard
Review Question
Which of the following would not be an objective
used in the customer perspective of the balanced
scorecard approach?
a. Percentage of customers who would recommend
product to a friend.
b. Customer retention.
c. Brand recognition.
d. Earning per share.
Solution on
notes page
Page
Balanced Scorecard
In summary, the balanced scorecard does the following:

1. Employs both financial and nonfinancial measures.
2. Creates linkages so that high-level corporate goals can be

communicated all the way down to the shop floor.
3. Provides measurable objectives for such nonfinancial

measures as product quality, rather than vague statements
such as ―We would like to improve quality.‖
4. Integrates all of the company’s goals into a single

performance measurement system, so that an inappropriate
amount of weight will not be placed on any single goal.
Page
Balanced Scorecard
Indicate which of the four perspectives in the
balanced scorecard is most likely associated with
with the objectives that follow.
1. Percentage of repeat customers.

Financial perspective
2. Number of suggestions for
improvement from employees.
Customer perspective
3. Contribution margin.
4. Market share.
Internal process
5. Number of cross-trained perspective
employees.
Learning and growth
6. Amount of setup time. perspective
Page
Page
11-50
 Medical costs for a family of four hit $13,383 in 2006, a 9.6%
increase over 2005. Of this amount, the employer typically
pays about $8,363, and the employee pays about $5,020.
Increases have averaged about 10% per year in recent years.
 During the 1990s many healthcare facilities provided bonuses
to doctors based on cost-based financial incentives. By the end
of the 1990s critics began to question this approach because
they felt it created perverse incentives for doctors. If a
doctor is under pressure to reduce costs, he or she may feel
compelled to not provide necessary care.
Page
11-51
 Two reports, To Err Is Human in 1999 and Crossing the
Quality Chasm in 2001, called attention to quality and
patient-safety shortcomings. As a result, the new emphasis
is to align compensation policies with quality improvement.
 Some health plans have adopted compensation systems that
attempt to tie pay to performance. These systems offer
higher pay for doctors who meet specific goals, such as
preventive care, patient satisfaction, acquisition of
information technology, and cost containment. In 2004,
major California health plans paid physician organizations
about $40 million in performance-based bonuses.
Page
11-52
As the following graph shows, the United States spends a huge
amount on health care compared to other countries. Note that we
spend more on a per person basis, and as a percentage of our gross
domestic product (GDP) than every other listed country. This fact
makes it even more frustrating that more than 40 million
Americans have no health coverage, and that on many measures
of healthcare quality, America falls short.
Source: BlueCross BlueShield

Association,
www.bcbs.com/mcrg/chap1/ch1_
Slide_4.html; adapted from
G. F. Anderson et al., Health
Affairs (2005).
Page
11-53
Eventually we all need to see a doctor. Therefore, we all have a
vested interest in the quality of medical care. As medical costs
have soared in recent years, many approaches have been tried to
keep costs down. A simmering debate has centered on a very basic
question: To what extent should accountants, through financial
measures, influence the type of medical care that you receive?
Suppose that your local medical facility is in danger of closing
because it has been losing money. Should the facility put in place
incentives that provide bonuses to doctors if they meet certain
standard-cost targets for the cost of treating specific ailments?
YES: If the facility is in danger of closing, then someone should

take steps to change the medical practices to reduce costs.
Page
11-54
Eventually we all need to see a doctor. Therefore, we all have a
vested interest in the quality of medical care. As medical costs
have soared in recent years, many approaches have been tried to
keep costs down. A simmering debate has centered on a very basic
question: To what extent should accountants, through financial
measures, influence the type of medical care that you receive?
Suppose that your local medical facility is in danger of closing
because it has been losing money. Should the facility put in place
incentives that provide bonuses to doctors if they meet certain
standard-cost targets for the cost of treating specific ailments?
NO: I don’t want an accountant deciding the right medical

treatment for me. My family and I deserve the best medical care.
Page
11-55
Standard Cost
appendix 11A Accounting System
A standard cost accounting system is a double-entry

system of accounting. Companies may use a standard cost
system with either
 job order or
 process costing.
The system is based on two important assumptions:

1. Variances from standards are recognized at the
earliest opportunity.
2. The Work in Process account is maintained exclusively
on the basis of standard costs.
Page
11-56 SO 9 Identify the features of a standard cost accounting system.
Standard Cost
Illustration: 1. Purchase raw materials on account for

$13,020 when the standard cost is $12,600.
Raw materials inventory 12,600
Materials price variance 420
Accounts payable 13,020
2. Incur direct labor costs of $20,580 when the standard

labor cost is $21,000.
Factory labor 21,000

Labor price variance 420
Wages payable 20,580
Page
Standard Cost
3. Incur actual manufacturing overhead costs of $10,900.

Manufacturing overhead 10,900
Accounts payable/Cash/Acc. Deprec. 10,900
4. Issue raw materials for production at a cost of $12,600

when the standard cost is $12,000.
Work in process inventory 12,000

Materials quantity variance 600
Raw materials inventory 12,600
Page
Standard Cost
5. Assign factory labor to production at a cost of $21,000

when standard cost is $20,000.
Labor price variance 1,000
Factory labor 21,000
6. Applying manufacturing overhead to production $10,000.

Manufacturing overhead 10,000
Page
Standard Cost
7. Transfer completed work to finished goods $42,000.
Finished goods inventory 42,000

8. The 1,000 gallons of Weed-O are sold for $60,000.
Accounts receivable 60,000

Cost of goods sold 42,000
Sales 60,000
Finished goods inventory 42,000
Page
Standard Cost
9. Recognize unfavorable total overhead variance:
Overhead variance 900

Manufacturing overhead 900
Page
Appendix
Appendix
25A
11A
Illustration 11A-1
Cost accounts with
variances
Standard Cost
Accounting System
Page
11-62
SO 9
A Closer Look at
appendix 11B Overhead Variances
The overhead variance is generally analyzed through a

price variance and a quantity variance.
Overhead controllable variance (price variance) shows

whether overhead costs are effectively controlled.
Overhead volume variance (quantity variance) relates to

whether fixed costs were under- or over-applied during
the year.
Page
11-63 SO 10 Compute overhead controllable and volume variance.
A Closer Look at
Overhead Controllable Variance

The overhead controllable variance shows whether
overhead costs are effectively controlled. To compute
this variance, the company compares actual overhead costs
incurred with budgeted costs for the standard hours
allowed. The budgeted costs are determined from a
flexible manufacturing overhead budget.
Page
A Closer Look at

For Xonic the budget formula for manufacturing overhead
is variable manufacturing overhead cost of $3 per hour of
labor plus fixed manufacturing overhead costs of $4,400.
Illustration 11B-1
Page
A Closer Look at

Illustration 11B-2 shows the formula for the overhead
controllable variance and the calculation for Xonic, Inc.
Illustration 11B-2
Page
A Closer Look at
Overhead Volume Variance
Difference between normal capacity hours and standard hours
allowed times the fixed overhead rate.
Illustration 11B-3
Page
A Closer Look at
Illustration: Xonic Inc. budgeted fixed overhead cost for the

year of $52,800. At normal capacity, 26,400 standard direct
labor hours are required. Xonic produced 1,000 units of Weed-
O in June. The standard hours allowed for the 1,000 gallons
produced in June is 2,000 (1,000 gallons x 2 hours). For Xonic,
standard direct labor hours for June at normal capacity is
2,200 (26,400 annual hours / 12 months). The computation of
the overhead volume variance in this case is as follows.
Illustration 11B-4
Page
A Closer Look at
In computing the overhead variances, it is important to

remember the following.
1. Standard hours allowed are used in each of the

variances.
2. Budgeted costs for the controllable variance are

derived from the flexible budget.
3. The controllable variance generally pertains to

variable costs.
4. The volume variance pertains solely to fixed costs.
Page
Copyright
―Copyright © 2010 John Wiley & Sons, Inc. All rights reserved.
Reproduction or translation of this work beyond that permitted
in Section 117 of the 1976 United States Copyright Act without
the express written permission of the copyright owner is
unlawful. Request for further information should be addressed
to the Permissions Department, John Wiley & Sons, Inc. The
purchaser may make back-up copies for his/her own use only
and not for distribution or resale. The Publisher assumes no
responsibility for errors, omissions, or damages, caused by the
use of these programs or from the use of the information
contained herein.‖
Page
11-70

Chapter11 001

Uploaded by

Copyright:

Available Formats

Chapter11 001

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chapter11 001

Uploaded by

Copyright:

Available Formats

Page

Distinguishing between Standards and Budgets

Facilitate management Promote greater economy Useful in setting selling

Contribute to management Useful in highlighting Simplify costing of

Setting standard costs requires input from all

Standards should change whenever managers

Ideal versus Normal Standards

Normal standards represent efficient levels of

Properly set, normal standards should be rigorous but

The standard for each element is derived from the

The standard direct materials cost is $12.00 ($3.00 x 4.0 pounds).

The standard direct labor cost is $20 ($10.00 x 2.0 hours).

Standard manufacturing overhead rate per gallon is $10

Total Standard Cost Per Unit

The total standard cost per gallon is $42.

One of the major management uses of standard

When actual costs exceed standard costs, the

When actual costs are less than standard costs, the

To interpret properly the significance of a variance,

The total standard cost of Illustration 11-9

Weed-O is $42,000 (1,000

Page SO 4 State the formulas for determining direct

Direct Materials Variances

Actual Quantity Standard Quantity Total Materials

Direct Materials Variances

Actual Quantity Actual Quantity Materials Price

Direct Materials Variances

Companies sometimes use a matrix to analyze a variance.

Actual Quantity Actual Quantity Standard Quantity

Price Variance Quantity Variance

$13,020 – $12,600 = $420 U $12,600 – $12,000 = $600 U

Illustration 11-14 $13,020 – $12,000 = $1,020 U

Page SO 4 State the formulas for determining direct

Causes of Material Variances

Materials price variance – factors that affect the price

Materials quantity variance – if the variance is due to

Page SO 4 State the formulas for determining direct

Page Solution on SO 4 State the formulas for determining direct

(2,100 x $9.80) - (2,000 x $10.00) = $580 U

Page Solution on SO 4 State the formulas for determining direct

Direct Labor Variances

(2,100 x $9.80) - (2,100 x $10.00) = $420 F

Page Solution on SO 4 State the formulas for determining direct

Direct Labor Variances

(2,100 x $10.00) - (2,000 x $10.00) = $1,000 U

Companies sometimes use a matrix to analyze a variance.

Page Solution on SO 4 State the formulas for determining direct

Actual Hours Actual Hours Standard Hours

Price Variance Quantity Variance

$20,580 – $21,000 = $420 F $21,000 – $20,000 = $1,000 U

Illustration 11-19 $20,580 – $20,000 = $580 U

Page SO 4 State the formulas for determining direct

Causes of Labor Variances

Labor price variance – usually results from two factors:

Manufacturing Overhead Variances

Page SO 5 State the formula for determining the

Total Overhead Variance

The predetermined rate for Weed-O is $5, comprised of a variable

Total Overhead Variance