This document provides information about the steel grade X6Cr13 (1.4000) including its chemical composition, equivalent grades, standards, properties, hardness, strength and elongation. The document lists these details and references the steel's density, classification, tensile strength range, proof strength, and minimum elongation.
This document provides information about the steel grade X6Cr13 (1.4000) including its chemical composition, equivalent grades, standards, properties, hardness, strength and elongation. The document lists these details and references the steel's density, classification, tensile strength range, proof strength, and minimum elongation.
This document provides information about the steel grade X6Cr13 (1.4000) including its chemical composition, equivalent grades, standards, properties, hardness, strength and elongation. The document lists these details and references the steel's density, classification, tensile strength range, proof strength, and minimum elongation.
This document provides information about the steel grade X6Cr13 (1.4000) including its chemical composition, equivalent grades, standards, properties, hardness, strength and elongation. The document lists these details and references the steel's density, classification, tensile strength range, proof strength, and minimum elongation.
4000 - steel equivalent, mechanical properties, chemical composition
EURO PEAN ST EEL AND ALLO Y
G RADES st eelnumber . com
Steel Steel and cast iron Alloy Equivalent Russian
Home Search About us numbers standards standards grades steels
YOU HERE: Steel numbers -> Number 1.40XX OR Steel and cast iron standards -> / EN 10088-2 / EN 10088- 3 / EN 10088-1
X6Cr13 ( 1.4000 )
Grade : X6Cr13
Number: 1.4000
EN 10088 - 2 : 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes Standard: EN 10088 - 3 : 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10088 - 1 : 2005 Stainless steels. List of stainless steels.
Density: 7.7 g/cm ³
Classification: Ferritic stainless steel
Equivalent grades: Go here
Che m ic a l c om pos it ion % of gr a de X 6 Cr 1 3 ( 1 .4 0 0 0 )
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
C Si Mn P S Cr
max 0.08 max 1 max 1 max 0.04 max 0.015 12 - 14
M e c ha nic a l pr ope r t ie s of gr a de X 6 Cr 1 3 ( 1 .4 0 0 0 )
Rm - Tensile strength (MPa) (+A) 400-600
Rp0.2 0.2% proof strength (MPa) (+A) 220-240
A - Min. elongation at fracture (%) (+A) 19
Brinell hardness (HB): (+A) 200
P r ope r t ie s of gr a de X 6 Cr 1 3 ( 1 .4 0 0 0 ) Resistance to intergranular corrosion: in the delivery condition - no; in the welded condition - no
Equiva le nt gr a de s of gr a de X 6 Cr 1 3 ( 1 .4 0 0 0 ) Warning! Only for reference USA Germany Japan France England Italy China Sweden Poland Czechia Russia - DIN,WNr JIS AFNOR BS UNI GB SS PN CSN GOST 410S X7Cr14 SUS410S Z6C13 403S17 X6Cr13 0Cr13 2301 0H13 17020 08KH13 S41008 Z8C12 Type403
M e c ha nic a l pr ope r t ie s M e c ha nis c he Eige ns c ha f t e n Ca r a c t e r is t ique s m e c a nique s R eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale R m Tensile strength / Zugfestigkeit / Resistance a la traction A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
He a t t r e a t m e nt c ondit ions +A Soft annealed +AC Annealed to achieve spheroidization of the carbides +AR As rolled +AT Solution annealed +C Cold drawn / hard +CR Cold rolled +FP Treated to ferrite-pearlite structure and hardness range +I Isothermal annealing +LC Cold drawn / soft +M Thermo mechanical rolling +N Normalized +NT Normalized and tempered +P Precipitation hardened +PE Peeled +QA Air quenched and tempered +QL Liquid quenched and tempered +QT Quenched and tempered +S Treated to improve shearability +SH As rolled and turned +SR Cold drawn and stress relieved +T Tempered +TH Treated to hardness range +WW Warm worked +U Untreated
Chemical composition of X6Cr13 (1.4000). Equivalent grades of X6Cr13 (1.4000). Standards of X6Cr13 (1.4000). Properties of X6Cr13 (1.4000). Hardness of X6Cr13 (1.4000). Strength of X6Cr13 (1.4000). Elongation of X6Cr13 (1.4000).
