Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

6DDE06DDE06DDE: 900 Monteringsanvisning

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Monteringsanvisning

900
SCdefault

0217(5,1*6$19,61,1*Â,167$//$7,21,16758&7,216
0217$*($1/(,781*Â,167$//$7,216'(0217$*(

SITdefault
6DDE06DDE06DDE
5RRIEDUV

Accessories Part No. Group Date Instruction Part No. Replaces




  2FW  )HE

D980A114

1 Roof bars (2x)


2 Plastic protectors (2x)

6DDE06DDE06DDE
2 86 77 056

2 1

D980A115

6DDE''
1 Mount the plastic protectors on the adjustable
supports (the side with the tightening knob), to
protect the paintwork while fitting the roof bars.
2 Open all the car doors.
Bend the rubber strip out of the way and locate
the fixing holes in the side of the roof.

6DDE06DDE06DDE
86 77 056 3

3,4 5

D980A116

4 Go to the other side of the car and remove the


plastic protector from the adjustable support.
3 Carefully position the roof bars on the roof with
Bend the rubber strip out of the way and insert
the fixed support towards you. Keep the support
the pins on the fixed support into the fixing
off the roof so that the paintwork is not dam-
holes.
aged.
Close the doors carefully.
Bend the rubber strip out of the way and insert
the pins on the fixed support into the fixing 5 Secure the roof bars by turning the tightening
holes. knobs on the ends clockwise.
Tighten by hand.
,PSRUWDQW 6 Remove in reverse order.
The roof bars for the Saab 900 and 9-3 are +LQWVIRU6DDE Mark the bars “front” and
marked with an illustration showing the location of “rear” to facilitate refitting.
the supports on the roof, see illustration. 7 Place the installation instructions inside the car.
Carefully close the doors on this side to secure
the supports in place.

6DDE06DDE06DDE
4 86 77 056

2 1

D980A118

6DDE''
1 Mount the plastic protectors on the adjustable
supports (the side with the tightening knob), to
protect the paintwork while fitting the roof bars.
2 Open the car doors.
Bend the rubber strip out of the way and locate
the fixing holes in the side of the roof at the front.
Remove the covers on the rear fixing points.

6DDE06DDE06DDE
86 77 056 5

3,4 5

3,4 5

D980A117
4 Go to the other side of the car and remove the
plastic protector from the adjustable support.
3 Carefully position the roof bars on the roof with
)URQWURRIEDUBend the rubber strip out of the
the fixed support towards you. Keep the support
way of the front fixing point and insert the pins
off the roof so that the paintwork is not dam-
on the fixed support into the fixing holes.
aged.
5HDUURRIEDUPress down the support over the
)URQWURRIEDUBend the rubber strip out of the
pins at the rear fixing point and push forwards.
way of the front fixing point and insert the pins
on the fixed support into the fixing holes. Close the doors carefully.
5HDUURRIEDUPress down the support over the 5 Secure the roof bars by turning the tightening
pins at the rear fixing point and push forwards. knobs on the ends clockwise.
Tighten by hand.
,PSRUWDQW 6 Remove in reverse order.
The roof bars for the Saab 900 and 9-3 are 7 Place the installation instructions inside the car.
marked with an illustration showing the location of
the supports on the roof, see illustration.

Carefully close the doors on this side to secure


the supports in place.

6DDE06DDE06DDE
6 86 77 056

D980A119
• Long loads must be supported on or lashed to
the car bumper or towing eye at front and rear.
$GYLFHRQGULYLQJZLWKURRIORDGV
• If the load protrudes more than 1 m behind the
• The maximum load per pair is 100 kg evenly car or in front of the car at all, it must be clearly
distributed load, including the weight of the roof marked with a warning flag or similar signal.
bars, 5 kg.
• When using the car’s roof bars to transport long
• The driver is responsible for making sure the and heavy loads, the speed must be adapted to
load is made secure in such a way that it will not the load. Never drive faster than 110 km/h.
come loose or cause damage or injury. Forces acting on the car roof and the roof bars
• Use sturdy lashing devices, e.g. lashing straps may then become too great.
with lockable tensioner. Do not use elastic straps • Stop occasionally to check the load and to
or rope for lashing anything heavier than a pair of retighten the lashing if necessary.
skis.
• Make sure the load is secured properly in the
direction of travel as well. This is just as
important as in a sideways direction.

6DDE06DDE06DDE

You might also like