General Catalogue 2016 en

2017
Turning, Drilling, Threading,

Milling, Adaptors
_ SETTING NEW STANDARDS IN MACHINING
General Catalogue
ENGINEERING KOMPETENZ –
FROM THE PRODUCT THROUGH
TO THE PROCESS SOLUTION.
Perfection and precision are basic requirements for

your success. We want more. Goals and solutions
that are still unimaginable today will be the bench-
marks of tomorrow. Whether for turning, milling,
drilling or threading, if you are looking for solutions
to meet the challenges of tomorrow, you will find
Walter. This we can promise you through, as we call it:
Engineering Kompetenz.
Walter’s Engineering Kompetenz is demonstrated not only by our more than

200 patents worldwide, but also by the professionalism we show in making
your tasks our own – going beyond not only focusing on the product but also by
considering your machining process too.
More than 45,000 standard tools and numerous special tools as well as industry-
specific solutions for the general mechanical engineering, aerospace, automotive,
energy, railway and mould making sectors, and the oil and gas industry: This is what
Walter stands for. Benefit from 400 years of innovation and experience along the
entire process chain: From our comprehensive range of precision tools to individual
consulting through to unique product services.
_ PRODUCT
Make exceeding standards

the standard.
With Walter, you can achieve exceptional results without

exceptional effort. This is because, with 45,000 standard tools,
Walter already offers a wide range of solutions that enable you
to exceed standards, without needing to use a special tool.
Set new standards in your machining work – with innovations

from us.
We achieve more than 40% of our turnover with tools that we have launched in the
last five years. This means that you can always rely on having cutting-edge technology
with Walter – both now and in the future – as we continuously develop and improve
our tool solutions as a matter of course so that you can consistently develop your own
advantages.
Walter tools perform above and beyond what is considered standard, because we pour
all of our experience, knowledge and engineering expertise into every innovation.
_ PROCESS
Optimise processes with

a clear perspective.
With Walter solutions, you can benefit from comprehensive

experience, expertise and transparency: From production
to logistics and software, through to training sessions held
at your location. We analyse all of your processes, define
possible improvements and support you in implementing those
improvements.
This enables you to increase efficiency across all of your

production processes.
For your machining processes, choose a service provider rather than a supplier.
Walter Multiply offers you first-hand expert knowledge. Thanks to the Multiply effect,
you can make your entire process chain even more effective, efficient and target-
oriented – in every phase, long before the first chip is cut. This enables you to fully
utilise all of our expertise.
The secret to all success is crystal-clear understanding. We analyse, understand and

optimise your processes, and you in turn benefit not only from extraordinary products,
but also from tailor-made advice and services.
_ SOLUTION
Absolute perfection,
down to the smallest detail.
For us, there is no such thing as a second-best solution. Only the

best is good enough for your requirements. When providing this,
we do not reinvent the wheel every day. But we do when it makes
sense. Talk to us about your challenges, and we will tailor our tool
and application solutions to meet them perfectly.
Benefits for all sectors – in terms of time and quality.
Whether you work in the general mechanical engineering, aerospace, automotive, energy,
oil and gas, railway or mould making sectors, our engineers develop new solutions
for your challenges, day after day. In our Industry Solutions department, we test the
use of these solutions within optimised manufacturing processes. If it is worthwhile
to use special tools, we will develop a component-specific machining concept for you,
which will provide measurable increases in productivity within a short time frame.
Perfection is our first priority when it comes to transforming your requirements into perfect solutions.
We focus on your application and what you want to achieve with it.
AEROSPACE
Achieve ambitious goals with ease.
By 2030, the number of passenger planes will more than double, increasing to 40,000 aircraft.
This presents a huge challenge for suppliers in the aerospace industry, as everything will need
to be improved: Materials and components will need to be lighter, while solutions and entire
processes will need to be simplified. Walter provides you with the widest range of machining tools
for the aerospace industry in the world.
LANDING GEAR MOUNTS

TITANIUM ALLOYS
Wall finishing operation with the

waterline process using the Ti50 high-
performance milling cutter, 1.5 × D
Roughing operations (slot, corner, contour and

pocket milling) on titanium alloys using the
Walter BLAXX M3255 porcupine milling cutter
WING RIBS
ALUMINIUM
HPC pocket and base finishing using

Rough milling and semi-finishing the Walter Prototyp HPC Al30 close
of pockets with high chip pitch cutter
volumes using the Walter 2131
ramping milling cutter
VIII
ENERGY
Achieve powerful results.
Whether they specialise in wind turbines or gas, coal or hydroelectric power stations,
manufacturers of systems and components for power generation face considerable challenges.
They need to construct cost-effective systems that nevertheless produce the maximum
amount of power. The precise yet cost-effective machining of components made of a wide
range of materials plays a particularly important role here.
TURBINE BLADE
DIFFICULT-TO-MACHINE MATERIALS
Finishing the transition radius and

platform using the Walter Prototyp
conical ball-nose end mill
Roughing the blade root, turbine blade and blade head

using the M2471 negative round insert milling cutter
THERMAL SHAFT
ALLOY STEEL
Machining fir-tree grooves using a

Roughing and semi- semi-finishing and finishing face milling
finish machining cutter with indexable inserts
of curved fir-tree
grooves using the
modular bell-type
milling cutter
You can find more information at www.walter-tools.com

IX
AUTOMOTIVE
We put you in motion.
Increasing environmental awareness constantly requires new technologies for automotive

development. This is in addition to rapid changes in models and demanding economic conditions,
which often make increases in productivity necessary. By choosing Walter, you are choosing a
proven specialist in the automotive sector.
TURBINE HOUSING WITH MANIFOLD

HEAT-RESISTANT CAST STEEL
Finish machining of the

flange surface using the
Walter Xpress M2029
finishing face milling cutter
Roughing and finishing
operations on the V-seal
using Walter inter-
polation turning tools
ENGINE BLOCK
GREY CAST IRON
Finish machining of the

main surfaces using the
Walter M2025/M2026
finishing face milling cutter
Finish machining of the cylinder main bore

using a Walter MODCO® actuation tool
You can find more information at www.walter-tools.com

X
GENERAL MECHANICAL ENGINEERING
Grow to meet your challenges.
Growth and innovations in mechanical engineering produce a constant flow of new challenges
for manufacturers of machine components. Whether for turning, milling, drilling or threading,
Walter offers you intelligent solutions for the entire spectrum of machining tools. This enables
you to meet any demands placed on you by increases in productivity, leaner processes and short
production time frames.
RM5 turning insert

Jet guiding geometry for optimum cooling when carrying out
ISO turning on stainless steels and high-temperature alloys
MC326 Supreme solid carbide cutter

G2042-P parting blade For reliable roughing and finishing with a
With excellent chip control for grooving long tool life and high cutting speeds
operations thanks to precision cooling
TC142 Supreme tap

For exceptional thread quality in stainless
steel thanks to excellent chip control
M4132 shoulder milling cutter

(Walter M4000 range)
Face and shoulder milling of steel, cast
iron, stainless steels and materials with
difficult cutting properties
B4030 precision boring head (ScrewFit)
For machining high-precision bores
DC170 Supreme
solid carbide drill
For drilling steel and cast iron
B4213 indexable insert drill including interrupted cuts or inclined
Universal drilling and reaming tool exits
for a wide range of applications
XI
WALTER MULTIPLY
Multiply your success factors.
With our Walter Multiply service concept, you can benefit from the full range of our solutions
expertise, from production to logistics through to software and training courses. This enables you
to not only increase the efficiency of your production process, but also maintain control of each
individual step in your process chain.
For maximum productivity and process reliability

With Walter Multiply, you benefit from customised services from a single source, without any unnecessary interfaces or
service components. In order to provide you with these services, we consider all aspects of your manufacturing process,
from procurement and provision of tools to the use of these tools through to reconditioning.
Experienced point of contact for the entire process

With sophisticated complete solutions and a comprehensive tool range, we optimise your manufacturing processes
throughout the entire life cycle of your tools, regardless of whether this involves planning new manufacturing processes,
optimising existing ones, selecting the ideal workholding system, generating the most efficient NC program or choosing
the best possible tools.
With Walter Multiply, you can benefit from our comprehensive Engineering Kompetenz:
– Expert and professional process management
– Always the best technologies – automatically implemented
– Guaranteed process results within the package price
– Reduced resource consumption
– Sustainable productivity advantages instead of
short-term savings at the point of purchase
hining An example of
Mac Re
co Walter Multiply
n expertise
di
tio
n ical suppor
nin
ch
ting
t
Te
g
Preset
Process
Proces
Expertise
Di
s
git
s
n
d
al applicatio
t
esi
en
gn
em
ag
n
Ma The modular solutions provided
Th
Pro
curem
en t by Walter Multiply form a solid
ba
basis for customised solution
co
concepts oriented towards the
req
requests and requirements of
ou customers.
our
XII
WALTER RECONDITIONING SERVICE
Reconditioning to the original

manufacturer quality pays off.
The Walter Reconditioning Service makes a significant contribution towards lowering your
production costs. This service provides you with Walter Titex and Walter Prototyp tools that are
as good as new, to the original manufacturer quality and at an attractive price-performance ratio.
ORIGINAL GEOMETRIES
Cutting edge geometries are extremely
complex. During reconditioning, Walter calls
upon its extensive engineering expertise to
return them to their original condition.
ORIGINAL COATING
When it comes to tool performance,
the coating is key. Only Walter uses OUR MARK OF 100% QUALITY
the original coating process during
reconditioning. Look out for the Original Walter
Quality label. This label indicates
that a tool has been reconditioned
ORIGINAL TOLERANCES
to original manufacturer quality.
μ
These tolerances and marks of quality are
just as important when reconditioning as It even appears in the ordering
when Walter manufactures a completely documents, enabling you to see the
new tool. To achieve this, we only use the tools for which we recommend our
most up-to-date measuring machinery. Reconditioning Service.
RECONDITIONING RANGE
– Solid carbide drills and milling cutters
– Solid carbide special drills and
special milling cutters
– High-performance solid carbide
reaming tools
– Solid carbide thread milling cutters
50% LOWER COSTS

100%
Tools are often disposed of far too early, even Tool costs
though the Walter Reconditioning Service can 75% -50 %
restore the tool a number of times to original
manufacturer quality. You can benefit from
50%
reduced costs, reliable production processes and
consistent tool life by reconditioning your tools
at our Reconditioning Center, which is available 25%
worldwide. It could save you up to 50% on your
tool costs! 0%
New 1× 2× 3×
You can find more information at Number of reconditioning operations
www.reconditioning.walter
XIII
A compendium of expertise in machining.
The new Walter General Catalogue 2017 contains the entire standard range of our competence
brands Walter, Walter Titex and Walter Prototyp. It replaces all previous General and Supplementary
Catalogues and is continuously expanded with product innovation brochures.
The catalogue consists of a total of four volumes, and is divided into:
A – Turning catalogue
B – Drilling and Threading catalogue
C – Milling catalogue
D – Adaptors catalogue
The individual chapters for an application are each expanded with a technical information section,
which applies directly to the previously described application.
General information regarding the application is summarised at the end of the volume.
You can find our complete range of tools in these catalogues as well as in the Product innovations
issues from 2017-1 onwards.
Find what you’re looking for without having to search – in the Walter General Catalogue
The volumes of the Walter General Catalogue are clearly

arranged, easy to read and structured for ease of use. Stability of machine, workpiece
With our proven Walter Select search system, you can and clamping arrangement Primary
application
easily and quickly find the right tool for drilling and
threading, milling and turning: Other
Very good Good Moderate application
‡ First select the appropriate subject area in the
Table of contents of a section
‡ Then find the appropriate tool in the
P M K N S H O
Product range overview in the section
Uncoated CC CC CC C C
‡ The Walter Select selection aid leads you TiN CC CC CC C
to the right tool without fail
If you already know what you need, use the alphanumeric index.
You will find additional information for tools in bars with cross references, for instance:
Adaptors Additional information Additional information

Icon Icon
from page D 1 in the for for
Adaptors catalogue
Assembly parts Information on
and accessories HSC high-speed applications
Assembly and
Achievable surface quality
A 20 D1 XIII setting instructions Ra/Rz
Reconditioning ConeFit Open-ended spanners for External holders for

in the catalogue ConeFit or ScrewFit tools turning or grooving
Indexable inserts introduction
from page A 20 on page XIII
Technical information
Internal holders for
turning or grooving
Cutting data
Subject to change without notice due to technical improvements.
XIV
Walter General Catalogue Contents
Page
A – Turning catalogue A2
A 1: ISO turning A4
A 2: Grooving A 269
A 3: Thread turning A 421
A 4: General information – Turning A 465
B – Drilling and Threading catalogue B 2 and B 706
Drilling B 1: Solid drilling B4
B 2: Counterboring and precision boring B 494
B 3: Reaming B 651
B 4: General information – Drilling B 695
Threading B 5: Tapping B 708
B 6: Thread forming B 1023
B 7: Thread milling B 1083
B 8: Threading dies B 1135
B 9: General information – Threading B 1143
C – Milling catalogue C2
C 1: Solid carbide, PCD and HSS milling tools C4
C 2: Milling tools with indexable inserts C 274
C 3: General information – Milling C 667
D 1: Stationary adaptors D3
D 2: Rotating adaptors D 50
D 3: General information – Adaptors D 159
A1
Turning tools
Walter offers a complete range of tools for turning, grooving and thread machining.
All tools are available with standard ISO square shanks and boring bars, and also with Walter CaptoTM interface C3-C8 in
accordance with ISO 26623 for maximum flexibility, stability and accuracy.
1 Walter NTS thread turning – Internal machining 5 Walter Cut modular system
[from page A 453] [from page A 368]
– Standard ISO boring bars and Walter CaptoTM boring bars – Maximum flexibility with more than 900 possible
– Three-edged indexable inserts for all of the most popular combinations
threads such as ISO metric, Whitworth, American UN, etc. – Reduction in inventory costs and faster set-up
times
2 Walter Cut – Internal machining
[from page A 325]
– Modular system for double-edged GX indexable inserts
for increasing flexibility and reducing tool costs
– The tool range starts from a machining diameter of
16 mm
3 Walter Turn lever clamp

[from page A 95]
– Unobstructed chip evacuation by means of lever
clamp for negative ISO indexable inserts
– Easy handling during insert replacement by operating
just one screw in the normal and overhead position
4 Walter Cut G1011 monoblock tools

[from page A 308]
– Maximum stability thanks to unique GX insert seat
design for single and double-edged cutting inserts
– Access to clamping screw from above and below
for easy tool handling
A2
6 Walter Cut G2042 deep parting blade 7 Walter Turn rigid clamping
[from page A 330] [from page A 93]
– Stable self-clamping system for SX cutting inserts using – Extremely stable insert clamping for negative
integral top clamp and optimised insert seat ISO indexable inserts
– Cost-effective, single-edged parting off solution for – Walter precision cooling on the rake face and
a cutting depth of up to 80 mm flank face increases tool life by 30-150%
8 Walter NTS thread turning – External machining

[from page A 450]
– Indexable inserts for all of the most popular threads
such as ISO metric, Whitworth, American UN, etc.
– Three-edged indexable inserts in full profile and
partial profile versions
9 Walter Cut – Axial grooving

[from page A 318]
– Outstanding chip evacuation thanks to the low tool
head height of the G1111 tools
– The Walter Cut modular system is available as an
alternative for maximum flexibility
10 Walter Turn screw clamping

[from page A 230]
– Extremely stable insert clamping for positive ISO indexable
inserts thanks to Torx Plus screw clamping
– The number one choice for use with low cutting pressures
or small diameter, unstable workpieces
A3
A1
A – Turning catalogue A 1: ISO turning
Page
Indexable inserts Product range overview – ISO indexable inserts A7
Designation key – ISO indexable inserts A8
Walter Select – ISO turning A 12
ISO indexable inserts – Negative basic shape A 20
ISO indexable inserts – Positive basic shape 5°/7°/11° A 37
Product range overview – CBN/PCD/ceramic A 60
Designation key – CBN/PCD/ceramic A 61
ISO indexable inserts – CBN/PCD/ceramic A 64
Walter Turn turning tools – Product description A 78

External machining
Product range overview A 80
System overview A 89
Designation key A 90
Walter Select – External machining A 92
Square-shank turning toolholders – Negative basic shape A 93
Square-shank turning toolholders – Positive basic shape A 126
Square-shank turning toolholders – Ceramic indexable inserts A 145
Walter Capto™ turning toolholders – Negative basic shape A 148
Walter Capto™ turning toolholders – Positive basic shape A 168
Walter Capto™ turning toolholders – Turning and milling centres A 182
A4
A1
A – Turning catalogue A 1: ISO turning
Page
Walter Turn turning tools – Product description A 189

Internal machining
Walter Select – Internal machining A 198
Boring bars – Negative basic shape A 199
Boring bars – Positive basic shape A 210
Walter Capto™ boring bars – Negative basic shape A 222
Walter Capto™ boring bars – Positive basic shape A 230
Technical information – Cutting data A 234

ISO turning
Cutting tool material application charts A 244
Geometry overview – Turning inserts A 247
Application information A 255
Assembly parts and accessories Walter Turn rigid clamping A 262
Shims for ISO clamp holders A 265
Coolant hose set for turning toolholders with precision cooling A 266
Coolant nozzles and adaptors A 267
A5
A6
ISO turning
A1
Product range overview of indexable inserts and cutting tool materials:

ISO turning – Carbides
Indexable inserts Cutting tool materials: Carbide
Range of applications
01 10 20 30 40
Insert shape Description Page Application Coating 05 15 25 35 45
Negative basic shape A 20 CVD WPP01
C Positive basic shape 7° A 37 CVD WPP05S
Positive basic shape 11° A 41

CVD WPP10S
Negative basic shape A 24 ISO P CVD WPP20S
D Positive basic shape 7° A 42

CVD WMP20S
CVD WPP30S
CVD WKP30S
R Positive basic shape 7° A 46

PVD WSM10S
CVD WMP20S
Negative basic shape A 27
ISO M PVD WSM20S
S Positive basic shape 7° A 48
PVD WSM21
PVD WSM30S
CVD WKK10S
T Positive basic shape 7° A 51
Positive basic shape 11° A 54 ISO K CVD WKK20S
CVD WKP30S

PVD
V Positive basic shape 5°/7° A 55 ISO N
WXN10
— WK1
PVD WSM10S
W Positive basic shape 7° A 58
— WS10
ISO S PVD WSM20S
PVD WSM21
PVD WSM30S
Wear resistance
Toughness
Indexable inserts A7
ISO turning
A1
Designation key in accordance with ISO 1832

for indexable inserts for turning
Example 1:
C N M G 12 04 08 – M P 5
1 2 3 4 5 6 7 12 13 14
1 2 3
Insert shape Clearance angle Tolerances
Permissible deviation in mm for

A F
A 85°
M 86°
3° 25° d m s
m
T A ± 0,025 ± 0,005 ± 0,025
82°
B O B G
5° 30 ° d C ± 0,025 ± 0,013 ± 0,025
m
E ± 0,025 ± 0,025 ± 0,025
C 80° P
C N C F ± 0,013 ± 0,005 ± 0,025
7° 0° S
D R G ± 0,025 ± 0,025 ± 0,130
d
55°
D P H ± 0,013 ± 0,013 ± 0,025

15 ° 11°
90° D J1 ± 0,05–0,152 ± 0,005 ± 0,025
E 75° S V
d m 1
K ± 0,05–0,15 2
± 0,013 ± 0,025
E 20°
H T 60°
L1 ± 0,05–0,152 ± 0,025 ± 0,025
M ± 0,05–0,152 ± 0,08–0,202 ± 0,130

s
K 55° V 35°
N ± 0,05–0,15 2
± 0,08–0,20 2
± 0,025
U ± 0,08–0,252 ± 0,13–0,382 ± 0,130

L W 80° 1
Inserts with ground planar cutting edges
2
Depending on the insert size
(see ISO standard 1832)
5 6
Cutting edge length l Insert thickness s
[mm] [mm]
C D R S T V W
Inner circle s
01 s = 1,59
diameter
d l l d l l l l
T1 s = 1,98
s
mm Inches Size l Size l Size Size l Size l Size l Size l 02 s = 2,38
3,97 5/32 06 6,9
5 0,197 05 03 3,8 s T2 s = 2,78
5,56 7/32 09 9
6 0,236 06 s
03 s = 3,18
6,35 2/8 06 6,4 07 7,7 061 11 11 11 11 04 4,3
8 0,315 08 05 5,2
T3 s = 3,97
9,525 3/8 09 9,6 11 11,6 091 09 9,5 16 16,5 16 16,5 06 6,5
04 s = 4,76
10 0,394 10
12 0,472 12 05 s = 5,56
12,7 4/8 12 12,9 15 15,5 121 12 12,7 22 22 22 22,1 08 8,7
15,875 5/8 16 16,1 15 15,8 27 27 10 10,8 06 s = 6,35
16 0,63 16
17,46 11/16 12 11,6
07 s = 7,94
19,05 6/8 19 19,3 191 19 19,0
09 s = 9,52
20 0,787 20
25 0,984 25
25,4 8/8 25 25,8 251 25 25,4
32 1,26 32
1
Inch version (00)
A8 Indexable inserts
ISO turning
A1
Example 2:
T N M A 16 04 08 T 020 20
1 2 3 4 5 6 7 8 10 11
Machining and fastening features
Drawing or precise
description of the
indexable insert is
β = 70–90° required
β
β = 70–90° β = 70–90° β = 40–60°
β = 70–90° β = 40–60°
β = 40–60°
β = 40–60°
7 8 9 10 11
Corner radius (r)
Edge formation Cutting direction Chamfer width Chamfer angle
[mm]
01 r = 0,1
02 r = 0,2
F
r R
04 r = 0,4 010 = 0,10 mm 15 = 15°
E 020 = 0,20 mm
08 r = 0,8 20 = 20°
12 r = 1,2 L 025 = 0,25 mm
T 070 = 0,70 mm
16 r = 1,6
24 r = 2,4 150 = 1,50 mm

S
R N 200 = 2,00 mm
M0 Metric version
(diameter in [mm])
00 Inch version
(diameter with inch
units in [mm])
Indexable inserts A9
ISO turning
A1
Geometry designation key

Geometry index
C N M G 12 04 08 – M P 5
1 2 3 4 5 6 7 12 13 14
New geometry index (valid from 09/2011)
12 13 14
Feed/depth of cut within
Chip breaking area Material
the chip breaking area
P Steel High
F Finishing operation
M Stainless steel 9
M Medium machining
K Cast iron 8
R Roughing operation 7
ap N NF metals
H Heavy cutting 6
S Materials with difficult
H
cutting properties 5
H Hard materials 4
R
3
M U Universal 2
F W 1
Low
f
Old geometry index
12 13 14
Basic shape Chip breaking area Cutting edge type
ap
N s 1 Fine
R
P s
M 4 Average
S
9 Robust
F
f
S ISO S high-temperature alloy materials
S Semi-finishing
T ISO S titanium materials
M Medium machining
R Roughing operation
A 10 Indexable inserts
ISO turning
A1
Designation key for carbide cutting tool materials – Turning
Example:
W M P 20 S
Walter 1 2 3 4
1 2 3 4
1. Primary application
2. Primary application ISO range of applications Generation
or coating type
Wear Cutting tool

P Steel P Steel resistance materials for: S Tiger·tec® Silver
M Stainless steel M Stainless steel 01 0 ISO turning
K Cast iron K Cast iron 05 1 ISO turning

10
N NF metals N NF metals 5 ISO turning
20
Materials with difficult Materials with difficult 2 Thread turning
S cutting properties
21
23 3 Grooving
H Hard materials H Hard materials
30
32
CVD aluminium oxide 33
A coating
43
X PVD coating Toughness
Indexable inserts A 11
ISO turning
A1
Walter Select for indexable inserts for turning

Step by step to the right indexable insert
STEP 1
Determine the material to be machined from Code Machining
page A 468 onwards. letters groups Groups of the materials to be machined
All types of steel and steel casting, with

Note the machining group that corresponds
to your material, e.g.: P10.
P P1–P15 Steel the exception of steel with an austenitic
structure
Austenitic stainless steel, austenitic-ferritic

M M1–M3 Stainless steel
steel and steel casting
Grey cast iron, cast iron with spheroidal

K K1–K7 Cast iron graphite, malleable cast iron, cast iron with
vermicular graphite
Aluminium and other non-ferrous metals,

N N1–N10 NF metals
non-ferrous materials
Heat-resistant special alloys based on iron,

Materials with difficult
S S1–S10
cutting properties
nickel and cobalt, titanium and titanium
alloys
Hardened steel, hardened cast iron materials,

H H1–H4 Hard materials
chilled cast iron
Plastics, glass and carbon fibre reinforced

O O1–O6 Other
plastics, graphite
STEP 2 Positive basic shape Negative basic shape Negative basic shape
double-sided single-sided
Determine the basic shape of the indexable
insert:
– Cutting forces [Fc] +

– Feed [f] +
– Depth of cut [ap] +
STEP 3 Machine stability, clamping system

and workpiece
Select the machining conditions:
Type of cutting action very good good moderate
a a b
Smooth cut,
premachined surface
a b c
Cast or forged skin,
variable depths of cut
Interrupted cuts b c c
ISO turning
A1
STEP 4 16
Determine the indexable insert geometry 10
via the depth of cut (ap) and the feed (f). RP5/RP7
6,3
MP5
ap [mm]
4,0
Geometries for
MP3
MP3
2,5
1,6
P Steel See page A 14 FP5
1,0
M Stainless steel See page A 15
0,63
K Cast iron See page A 16
0,4
N NF metals See page A 17
0,25
S High-temperature alloys See page A 18
H Hard materials See page A 19
STEP 5
Basic shape
Overview of catalogue page on which you will
find the selected geometry in the relevant C D R S T V W
Geometry
basic shape.
from page from page from page from page from page from page from pag
NF* A 20 A 24 A 34
FP5 A 20 A 24 A 27 A 30 A 33 A 34
NM* A 20 A 24 A 34
MP3 A 20 A 24 A 27 A 30 A 33 A 34
MP5 A 20 A 24 A 27 A 30 A 33 A 34
RP5 A 20 A 24 A 27 A 30 A 34
RP7 A 20 A 27 A 30 A 34
STEP 6 r
Negative rhombic 80°
You will find the cutting tool material CNMG / CNGG / CNMA / CNMM d
recommendation, the feed value (f) and

Tiger·tec® Silver
the depth of cut (ap) on the specified 80˚ l s
catalogue page.
Indexable inserts
r P M K S
dexa ble insert fo
Optimum in
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WPP01
WS10
r f ap
Designation mm mm mm
Poor a ab b b
Average
CNMG120404-NF 0,4 0,10–0,40 0,4–2,0
Good CNMG120408-NF 0,8 0,15–0,55 0,5–3,0 a ab b b
itions
mac hining cond
CNMG120404-NFT 0,4 0,08–0,17 0,4–1,5 b c b
STEP 7
Cutting data for turning inserts – Negative basic shape
Select the cutting data in the technical Carbide grades
information from page A 234 onwards for your
selected indexable insert. = Cutting data for wet machining Cutting material grades
= Dry machining is possible
Starting values
for cutting speed vc [m/min]
HC
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group
Overview of the main material groups WPP01

and code letters
N/mm2
0,10 0,20 0,30
C ≤ 0.25% Annealed 125 430 P1 CC C 530 510 480

C > 0.25 to ≤ 0.55% Annealed 190 640 P2 CC C 420 400 380
C > 0.25 to ≤ 0.55% Heat-treated 210 710 P3 CC C 320 300 290
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 360 340 320
C > 0.55% Heat-treated 300 1010 P5 CC C 270 250 220
Free cutting steel (short-chipping) Annealed 220 750 P6 CC C 500 480 460
Annealed 175 590 P7 CC C 380 370 350
P Low-alloyed steel
Heat-treated 285 960 P8 CC C 240 220 210
Annealed 200 680 P11 CC C 340 330 320
High-alloyed steel and
Hardened and tempered 300 1010 P12 CC C 250 240 230
high-alloyed tool steel
ISO turning
A1
Walter Select – ISO P steel machining
STEP 4
Determine the indexable insert geometry via the depth of cut (ap) and the feed (f).
Negative basic shape Negative basic shape

Negative basic shape P single-sided
P double-sided P
16 16 16
NRR
10 10 10
RP5 / RP7 NRF
6,3 6,3 6,3
MP5
ap [mm]
ap [mm]
ap [mm]
4,0 4,0 4,0
MP3
MP3 NM
2,5 2,5 2,5
NF
1,6 1,6 1,6
FP5
1,0 1,0 1,0
0,63 0,63 0,63
0,4 0,4 0,4
0,25 0,25 0,25
0,16 0,16 0,16
0,1 0,1 0,1

0,025 00,04
04 00,063
063 00,11 0,16
063 0 16 00,25
2 0,4
25 0 4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm] f [mm]
RP5: For universal machining

RP7: For interrupted cuts, cast skin/forged skin
Positive basic shape P Positive basic shape P

16 16
10 10 For more technical information,

6,3 6,3 see page A 255 onwards.
ap [mm]
ap [mm]
4,0 4,0
RP4 PM
2,5 MP4/ 2,5
PF
1,6 FP6 1,6
1,0 FP4/ 1,0

PF21
0,63 0,63
0,4 0,4
0,25 0,25
0,16 0,16
0,1 0,1
0,025 0,04 0,063
0 063 0,1
0 1 0,16
0 16 0,25
0 2 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
MP4: For universal machining, copy turning

FP6: For semi-finishing operations
1
Circumference fully ground
STEP 5 Basic shape

Overview of catalogue page on which C D R S T V W
you will find the selected geometry in Geometry
the relevant basic shape. from page from page from page from page from page from page from page
NF* A 20 A 24 A 34
FP5 A 20 A 24 A 27 A 30 A 33 A 34
NM* A 20 A 24 A 34
MP3 A 20 A 24 A 27 A 30 A 33 A 34
MP5 A 20 A 24 A 27 A 30 A 33 A 34
RP5 A 20 A 24 A 27 A 30 A 34
RP7 A 20 A 27 A 30 A 34
NRF A 20 A 24 A 27 A 30 A 34
NRR A 20 A 27 A 30
PF* A 37 A 42 A 58
PF2 A 37 A 42 A 48 A 51 A 55 A 58
FP4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
FP6 A 37 A 42 A 48 A 51 A 55 A 58
PM* A 37 A 42
MP4 A 37 A 42 A 48 A 51 A 55 A 58
RP4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
* HU6 A 46
ISO turning
A1
Walter Select – ISO M stainless steel
STEP 4 Negative basic shape

Negative basic shape M double-sided M
Determine the indexable insert 16 16
geometry via the depth of cut (ap) 10 10
and the feed (f). 6,3 6,3
NR4
ap [mm]
ap [mm]
4,0 4,0
NM4 NM
2,5 2,5
NF
1,6 1,6
1,0 NF4 1,0
0,63 0,63
0,4 0,4
0,25 0,25
0,16 0,16
0,1 0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
Positive basic shape M Positive basic shape M

16 16
10 10
6,3 6,3
ap [mm]
ap [mm]
4,0 RM4 4,0
PM
2,5 2,5
MM4/
1,6 PS5 1,6 PF
1,0 1,0
0,63 FM4/ 0,63
0,4
PF21 0,4
0,25 0,25
0,16 0,16
0,1 0,1
0,025 00,04
04 00,063
0633 00,11 0,16
06 0 16
1 00,25
2 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
MM4: For universal machining, copy turning

PS5: For semi-finishing operations
1
For more technical information,
see page A 255 onwards.
STEP 5 Basic shape

the relevant basic shape.
from page from page from page from page from page from page from page
NF* A 20 A 24 A 34
NF4 A 20 A 24 A 27 A 30 A 34
NM* A 20 A 34
NM4 A 20 A 24 A 27 A 30 A 33 A 34
NR4 A 20 A 24 A 27 A 30 A 34
PF* A 37 A 42 A 58
PF2 A 37 A 42 A 48 A 51 A 55 A 58
FM4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
PF5 A 37 A 46 A 55
PS5 A 37 A 42 A 48 A 51 A 55
PM* A 37 A 42
MM4 A 37 A 42 A 48 A 51 A 55 A 58
* RM4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
ISO turning
A1
Walter Select – ISO K cast iron machining
STEP 4 Negative basic shape

Negative basic shape K double-sided K
geometry via the depth of cut (ap) RK7
10 10
and the feed (f). RK5
6,3 6,3
MK5
ap [mm]
ap [mm]
4,0 4,0
NM
2,5 . . MA 2,5
NF
(Si3N4)
1,6 1,6
1,0 1,0
0,63 0,63
0,4 0,4
. . MA
0,25 (CBN) 0,25
0,16 0,16
0,1 0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
RK5: For universal machining

RK7: For interrupted cuts, extreme cast skin
Positive basic shape K Positive basic shape K

16 16
10 10
6,3 6,3
RK
RK6
K6
ap [mm]
ap [mm]
4,0 4,0
RK4 PM
2,5 2,5
1,6 MK4 1,6 PF

1,0 FK6 1,0
0,63 0,63
0,4 0,4
. . MW
0,25 (CBN) 0,25
0,16 0,16
0,1 0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
For more technical information,

see page A 255 onwards.
STEP 5 Basic shape

NF* A 20 A 24 A 34
NM* A 20 A 24 A 34
MK5 A 20 A 24 A 27 A 30 A 33 A 34
RK5 A 20 A 24 A 27 A 30 A 33 A 34
RK7 A 20 A 24 A 27 A 30 A 34
. . MA (CBN) A 64 A 64 A 65
. . MA (Si3N4) A 73 A 73 A 74
PF* A 37 A 42 A 58
FK6 A 37 A 42 A 48 A 51 A 55 A 58
PM* A 37 A 42
MK4 A 37 A 42 A 48 A 51 A 55 A 58
RK4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
RK6 A 37 A 42 A 48 A 51 A 55
HU6 A 46
*
. . MW (CBN) A 66 A 67 A 67 A 68 A 68
ISO turning
A1
Walter Select – ISO S high-temperature and titanium alloys
STEP 4 Ni, Co and Fe-based alloys Titanium-based alloys
Determine the indexable insert

Negative basic shape Negative basic shape
geometry via the depth of cut (ap) double-sided S double-sided S
and the feed (f). 16 16
10 10
6,3 6,3 NRT

NRS
ap [mm]
ap [mm]
4,0 4,0
2,5 NMS/ 2,5 NMT

1,6 . . GN2 1,6
NFT1
1,0 1,0
0,63
NF4/ 0,63
NFT1
0,4 0,4
0,25 0,25
0,16 0,16
0,1 0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
Ni, Co, Fe and titanium-based alloys
Positive basic shape S

16
10
6,3
ap [mm]
4,0
2,5 RM4
1,6 MM4/
1,0 PS5
0,63
. . GX2
0,4 FM4/
0,25 PF21
0,16
0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 1
f [mm]
2
Ceramic
MM4: For universal machining, copy turning
PS5: For semi-finishing operations
STEP 5 Basic shape

NFT A 20 A 24 A 33
NF4 A 20 A 24 A 27 A 30 A 34
NMT A 20 A 24 A 30 A 34
NMS A 20 A 24 A 30 A 33 A 34
NRT A 20 A 27
NRS A 20 A 24 A 27 A 30 A 34
. . GN2 A 73 A 73 A 74 A 74
PF2 A 37 A 42 A 48 A 51 A 55 A 58
FM4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
PF5 A 37 A 46 A 55
PS5 A 37 A 42 A 48 A 51 A 55
MM4 A 37 A 42 A 48 A 51 A 55 A 58
RM4 A 37 A 42 A 46 A 48 A 51 A 55 A 58
. . GX2 A 74
2
Ceramic
ISO turning
A1
Walter Select – ISO N NF metals
STEP 4 Positive basic shape Positive basic shape

Carbide N PCD N
.CGW...FSR/L-9
ap [mm]
ap [mm]
4,0
4,0
PM21
2,5 2,5
.CGW...FS-1
1,6
PF21 1,6
1,0 1,0 .CGT...

FS-M1
0,63 0,63
0,4 0,4
0,25 0,25
0,16 0,16
.CGT...FS-1
0,1 0,1
0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5 0,025 0,04 0,063 0,1 0,16 0,25 0,4 0,63 1,0 1,6 2,5
f [mm] f [mm]
1
STEP 5 Basic shape

PF2 A 37 A 42 A 48 A 51 A 55 A 58
PM2 A 37 A 42 A 46 A 48 A 51 A 55 A 58
. CGT . . . FS-M11 A 69 A 70
. CGT . . . FS-11 A 69 A 70 A 72
. CGW . . . FS-11 A 69 A 70 A 71 A 72
1
. CGW . . . FSR/L-9 A 69 A 71 A 71
1
PCD
ISO turning
A1
Walter Select – ISO H hard machining
STEP 4
Negative basic shape H Positive basic shape H
ap [mm]
ap [mm]
4,0 4,0
2,5 2,5
1,6 1,6
1,0 1,0
RK7
0,63 0,63
RK5
0,4 0,4
0,25 0,25
. . MA . . MW
0,16 (CBN) 0,16 (CBN)
0,1 0,1
0,025 0,04
04 0, 063 00,1
0,06
0,063 ,11 0,16
0 16
16 00,25
,25
25 00,44 00,63
25 ,63 1,0 1,6 2,5 0,025 0,04
04 0,063 0,1
0,06
0,063 0 1 0,16
0 16 00,25
,25
25 0,4 0,63 1,0 1,6 2,5
f [mm]
[ ] f [mm]
STEP 5 Basic shape

RK51 A 20 A 24 A 27 A 30 A 33 A 34
1
RK7 A 20 A 24 A 27 A 30 A 33 A 34
. . MA2 A 64 A 64 A 65 A 65
. . MW2 A 66 A 67 A 67 A 68
1
Use grade WKK10S
2
CBN
ISO turning
A1
r
CNMG / CNGG / CNMA / CNMM d
Tiger·tec® Silver l s
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WPP01
WS10
r f ap
CNMG120404-NF 0,4 0,10–0,40 0,4–2,0 a ab b b
CNMG120408-NF 0,8 0,15–0,55 0,5–3,0 a ab b b
CNMG120404-NFT 0,4 0,08–0,17 0,4–1,5 b c b

CNMG120408-NFT 0,8 0,10–0,20 0,5–2,0 b c b
CNGG120404-NFT 0,4 0,06–0,15 0,3–1,5 b

CNGG120408-NFT 0,8 0,08–0,18 0,4–2,0 b
CNMG120404-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab

CNMG120408-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
CNMG120412-NF4 1,2 0,10–0,20 0,5–1,6 ab ab
CNMG090304-FP5 0,4 0,04–0,20 0,1–1,5 ab

CNMG090308-FP5 0,8 0,08–0,25 0,2–2,0 ab
CNMG120404-FP5 0,4 0,04–0,20 0,1–1,5 ab
CNMG120408-FP5 0,8 0,08–0,25 0,2–2,0 ab
CNMG120412-FP5 1,2 0,10–0,25 0,5–2,5 ab
CNMG120408-NM 0,8 0,20–0,55 0,8–3,0 ab b ab b
CNMG120412-NM 1,2 0,25–0,70 1,5–4,0 ab b ab b
CNMG120408-NMT 0,8 0,12–0,30 0,8–4,0 b b b

CNMG120412-NMT 1,2 0,15–0,32 1,0–4,0 b b b
CNMG120404-NMS 0,4 0,10–0,24 0,6–2,5 abc abc

CNMG120408-NMS 0,8 0,13–0,32 0,8–3,5 abc abc
CNMG120412-NMS 1,2 0,16–0,36 1,0–3,5 abc abc
CNMG090304-MP3 0,4 0,06–0,20 0,3–2,2 ab

CNMG090308-MP3 0,8 0,10–0,28 0,6–3,0 ab
CNMG120404-MP3 0,4 0,08–0,22 0,3–2,5 abc
CNMG120408-MP3 0,8 0,12–0,32 0,6–3,2 aabc
CNMG120412-MP3 1,2 0,16–0,40 0,8–3,5 aabc
See the ISO 1832 designation key for dimensions HC = Coated carbide
HW = Uncoated carbide
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WPP01
WS10
r f ap
CNMG120404-MP5 0,4 0,16–0,25 0,5–4,0 aabc
CNMG120408-MP5 0,8 0,18–0,40 0,6–5,0 aabc a
CNMG120412-MP5 1,2 0,20–0,45 1,0–5,0 aabc
CNMG120416-MP5 1,6 0,25–0,50 1,2–5,0 abc
CNMG160608-MP5 0,8 0,25–0,50 0,8–7,0 aabc
CNMG160612-MP5 1,2 0,30–0,50 1,0–7,0 aabc
CNMG160616-MP5 1,6 0,35–0,55 1,2–7,0 abc
CNMG120404-NM4 0,4 0,10–0,20 0,5–3,0 bbabc abc
CNMG120408-NM4 0,8 0,15–0,32 0,8–3,0 bbabc abc
CNMG120412-NM4 1,2 0,15–0,35 0,8–3,5 bbabc abc
CNMG120416-NM4 1,6 0,15–0,40 1,0–4,0 bc bc
CNMG160608-NM4 0,8 0,15–0,35 0,8–4,5 bbabc abc
CNMG160612-NM4 1,2 0,18–0,40 0,8–4,5 bbabc abc
CNMG160616-NM4 1,6 0,20–0,45 1,0–4,5 bc bc
CNMG090308-MK5 0,8 0,10–0,20 0,2–3,0 ab
CNMG120404-MK5 0,4 0,16–0,25 0,6–5,0 ab
CNMG120408-MK5 0,8 0,25–0,50 0,8–5,0 ab
CNMG120412-MK5 1,2 0,30–0,50 1,2–5,0 ab
CNMG120416-MK5 1,6 0,35–0,50 1,5–5,0 ab
CNMG160608-MK5 0,8 0,25–0,50 0,8–7,0 ab
CNMG160612-MK5 1,2 0,30–0,60 1,2–7,0 ab
CNMG160616-MK5 1,6 0,35–0,60 1,5–7,0 ab
CNMG190612-MK5 1,2 0,30–0,65 1,2–8,0 ab
CNMG190616-MK5 1,6 0,35–0,80 1,5–8,0 ab
CNMG120408-NRT 0,8 0,18–0,35 1,0–6,0 b b b
CNMG120412-NRT 1,2 0,20–0,40 1,2–6,0 b b b
CNMG160612-NRT 1,2 0,28–0,55 1,5–7,5 b b b
CNMG190616-NRT 1,6 0,35–0,70 2,0–9,0 b b b
CNMG120408-NRS 0,8 0,16–0,35 1,0–4,0 abc abc
CNMG120412-NRS 1,2 0,18–0,40 1,2–4,0 abc abc
CNMG160612-NRS 1,2 0,21–0,45 1,2–6,5 abc abc
CNMG160616-NRS 1,6 0,23–0,50 1,5–6,5 ab ab
CNMG190608-NRS 0,8 0,20–0,45 1,0–8,0 ab ab
CNMG190612-NRS 1,2 0,23–0,50 1,2–8,5 ab ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WPP01
WS10
r f ap
CNMG120408-NR4 0,8 0,22–0,40 1,2–5,0 bbabc abc
CNMG120412-NR4 1,2 0,25–0,50 1,5–5,0 bbabc abc
CNMG120416-NR4 1,6 0,30–0,55 2,0–5,0 bc bc
CNMG160608-NR4 0,8 0,22–0,45 1,2–7,0 abc abc
CNMG160612-NR4 1,2 0,25–0,60 1,5–7,0 bbabc abc
CNMG160616-NR4 1,6 0,30–0,65 2,0–7,0 bc bc
CNMG190612-NR4 1,2 0,25–0,60 1,5–8,0 bbabc abc
CNMG190616-NR4 1,6 0,30–0,80 2,0–8,0 abc abc
CNMG120408-RP5 0,8 0,20–0,40 0,8–6,0 aabc ab
CNMG120412-RP5 1,2 0,25–0,60 1,0–6,0 aabc ab
CNMG120416-RP5 1,6 0,35–0,70 1,6–6,0 aabc
CNMG160608-RP5 0,8 0,20–0,45 1,0–8,0 abc
CNMG160612-RP5 1,2 0,25–0,60 1,2–8,0 aabc b
CNMG160616-RP5 1,6 0,35–0,70 1,6–8,0 aabc b
CNMG160624-RP5 2,4 0,40–0,90 2,0–8,0 abc
CNMG190608-RP5 0,8 0,20–0,50 1,0–10,0 abc
CNMG190612-RP5 1,2 0,25–0,65 1,2–10,0 aabc
CNMG190616-RP5 1,6 0,35–0,80 1,6–10,0 aabc
CNMG190624-RP5 2,4 0,45–1,00 2,0–10,0 abc
CNMG250924-RP5 2,4 0,45–1,20 2,0–12,0 abc
CNMG120408-RP7 0,8 0,25–0,50 0,8–5,0 abc c
CNMG120412-RP7 1,2 0,30–0,50 1,2–5,0 abc c
CNMG120416-RP7 1,6 0,35–0,50 1,5–5,0 abc
CNMG160608-RP7 0,8 0,30–0,50 0,8–6,0 abc
CNMG160612-RP7 1,2 0,35–0,60 1,2–6,0 abc c
CNMG160616-RP7 1,6 0,40–0,60 1,5–6,0 abc c
CNMG190612-RP7 1,2 0,35–0,60 1,2–7,0 abc c
CNMG190616-RP7 1,6 0,40–0,60 1,5–7,0 abc c
CNMG250924-RP7 2,4 0,45–1,00 3,0–9,0 b c
CNMA120404-RK5 0,4 0,16–0,25 0,6–5,0 ab
CNMA120408-RK5 0,8 0,25–0,50 0,8–5,0 ab
CNMA120412-RK5 1,2 0,30–0,50 1,2–5,0 ab
CNMA120416-RK5 1,6 0,35–0,70 1,5–5,0 ab
CNMA160612-RK5 1,2 0,35–0,70 1,2–7,0 ab
CNMA160616-RK5 1,6 0,35–0,80 1,5–7,0 ab
CNMA190612-RK5 1,2 0,30–0,65 1,2–8,0 ab
CNMA190616-RK5 1,6 0,35–0,80 1,5–8,0 ab
CNMA190624-RK5 2,4 0,40–0,90 2,5–8,0 b
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WPP01
WS10
r f ap
CNMA120408-RK7 0,8 0,25–0,50 0,8–5,0 ab
CNMA120412-RK7 1,2 0,30–0,50 1,2–5,0 ab
CNMA120416-RK7 1,6 0,35–0,70 1,5–5,0 ab
CNMA160612-RK7 1,2 0,35–0,70 1,2–7,0 ab
CNMA160616-RK7 1,6 0,35–0,80 1,5–7,0 ab
CNMA190612-RK7 1,2 0,30–0,65 1,2–8,0 ab
CNMA190616-RK7 1,6 0,35–0,80 1,5–8,0 ab
CNMM120408-NRF 0,8 0,30–0,50 0,8–7,0 abc
CNMM120412-NRF 1,2 0,35–0,70 1,2–7,0 aabc
CNMM120416-NRF 1,6 0,40–0,80 1,6–7,0 abc
CNMM160612-NRF 1,2 0,35–0,70 1,2–9,0 aabc
CNMM160616-NRF 1,6 0,40–0,90 1,6–9,0 aabc
CNMM160624-NRF 2,4 0,45–1,00 2,4–9,0 abc
CNMM190612-NRF 1,2 0,35–0,70 1,2–10,0 abc
CNMM190616-NRF 1,6 0,40–0,90 1,6–10,0 abc
CNMM190624-NRF 2,4 0,45–1,10 2,4–10,0 abc
CNMM250924-NRF 2,4 0,45–1,20 2,4–12,0 bc
CNMM120412-NRR 1,2 0,40–0,80 1,5–8,0 abc
CNMM160612-NRR 1,2 0,50–0,90 2,0–10,0 abc c
CNMM160616-NRR 1,6 0,50–1,10 2,0–10,0 abc c
CNMM160624-NRR 2,4 0,50–1,30 2,0–10,0 abc
CNMM190612-NRR 1,2 0,50–0,90 2,0–13,0 abc
CNMM190616-NRR 1,6 0,50–1,10 2,0–13,0 abc c
CNMM190624-NRR 2,4 0,60–1,60 3,0–13,0 abc c
CNMM250924-NRR 2,4 0,60–1,60 3,0–17,0 abc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
DNMG / DNGG / DNMA / DNMM d
Tiger·tec® Silver 55˚ l s
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
DNMG110408-NF 0,8 0,15–0,50 0,5–2,0 a a b b
DNMG150408-NF 0,8 0,15–0,50 0,5–3,0 a a b b
DNMG150608-NF 0,8 0,15–0,50 0,5–3,0 a a b b
DNMG150404-NFT 0,4 0,06–0,16 0,4–1,5 b b b

DNMG150408-NFT 0,8 0,08–0,19 0,5–2,0 b b b
DNMG150604-NFT 0,4 0,06–0,16 0,4–1,5 b b b
DNMG150608-NFT 0,8 0,08–0,19 0,5–2,0 b b b
DNGG150404-NFT 0,4 0,05–0,14 0,2–1,5 b
DNGG150408-NFT 0,8 0,07–0,17 0,3–2,0 b
DNGG150604-NFT 0,4 0,05–0,14 0,2–1,5 b
DNGG150608-NFT 0,8 0,07–0,17 0,3–2,0 b
DNMG110404-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab
DNMG110408-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
DNMG150404-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab
DNMG150408-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
DNMG150604-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab
DNMG150608-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
DNMG150612-NF4 1,2 0,10–0,20 0,5–1,6 ab ab
DNMG110402-FP5 0,2 0,04–0,12 0,1–0,5 ab
DNMG110404-FP5 0,4 0,04–0,20 0,1–1,5 ab
DNMG110408-FP5 0,8 0,08–0,25 0,2–2,0 ab
DNMG110412-FP5 1,2 0,10–0,25 0,5–2,5 ab
DNMG150404-FP5 0,4 0,05–0,20 0,1–1,5 ab
DNMG150408-FP5 0,8 0,08–0,25 0,2–2,0 ab
DNMG150412-FP5 1,2 0,10–0,25 0,5–2,5 ab
DNMG150604-FP5 0,4 0,05–0,20 0,1–1,5 ab
DNMG150608-FP5 0,8 0,08–0,25 0,2–2,0 ab
DNMG150612-FP5 1,2 0,10–0,25 0,5–2,5 ab
DNMG110408-NM 0,8 0,15–0,50 0,8–3,0 ab a
DNMG110412-NM 1,2 0,20–0,60 1,5–4,0 a ab
DNMG150408-NM 0,8 0,15–0,50 0,8–3,0 a a
DNMG150608-NM 0,8 0,15–0,50 0,8–3,0 aab ab
DNMG150612-NM 1,2 0,20–0,60 1,5–4,0 aa ab
DNMG110404-NMT 0,4 0,08–0,22 0,4–2,5 b b b
DNMG110408-NMT 0,8 0,12–0,28 0,6–3,2 ab ab b
DNMG150408-NMT 0,8 0,12–0,28 0,6–4,0 b b b
DNMG150608-NMT 0,8 0,12–0,28 0,6–4,0 ab ab b
DNMG150612-NMT 1,2 0,15–0,30 0,8–4,0 b b b
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
DNMG150404-NMS 0,4 0,09–0,22 0,6–2,5 ab ab
DNMG150408-NMS 0,8 0,11–0,30 0,8–3,5 abc abc
DNMG150604-NMS 0,4 0,09–0,22 0,6–2,5 ab ab
DNMG150608-NMS 0,8 0,11–0,30 0,8–3,5 abc abc
DNMG110404-MP3 0,4 0,08–0,22 0,3–2,2 abc
DNMG110408-MP3 0,8 0,12–0,32 0,6–3,0 aabc
DNMG110412-MP3 1,2 0,16–0,40 0,8–3,2 aabc
DNMG150404-MP3 0,4 0,08–0,22 0,3–2,5 abc
DNMG150408-MP3 0,8 0,12–0,32 0,6–3,2 aabc
DNMG150412-MP3 1,2 0,16–0,40 0,8–3,5 aabc
DNMG150604-MP3 0,4 0,08–0,22 0,3–2,5 abc
DNMG150608-MP3 0,8 0,12–0,32 0,6–3,2 aabc
DNMG150612-MP3 1,2 0,16–0,40 0,8–3,5 aabc
DNMG110404-MP5 0,4 0,16–0,25 0,5–4,0 abc
DNMG110408-MP5 0,8 0,18–0,35 0,6–4,0 abc
DNMG110412-MP5 1,2 0,20–0,40 1,0–4,0 abc
DNMG150404-MP5 0,4 0,16–0,25 0,5–4,0 abc
DNMG150408-MP5 0,8 0,18–0,35 0,6–5,0 aabc
DNMG150412-MP5 1,2 0,20–0,40 1,0–5,0 aabc
DNMG150416-MP5 1,6 0,25–0,45 1,2–5,0 abc
DNMG150604-MP5 0,4 0,16–0,25 0,5–4,0 abc
DNMG150608-MP5 0,8 0,18–0,35 0,6–5,0 aabc
DNMG150612-MP5 1,2 0,20–0,40 1,0–5,0 aabc
DNMG150616-MP5 1,6 0,25–0,45 1,2–5,0 abc
DNMG110404-NM4 0,4 0,10–0,18 0,5–2,0 bbabc abc
DNMG110408-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
DNMG150404-NM4 0,4 0,10–0,18 0,5–2,5 bbabc abc
DNMG150408-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
DNMG150412-NM4 1,2 0,18–0,30 0,8–3,0 abc abc
DNMG150604-NM4 0,4 0,10–0,18 0,5–2,5 bbabc abc
DNMG150608-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
DNMG150612-NM4 1,2 0,18–0,30 0,8–3,0 bbabc abc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
DNMG110404-MK5 0,4 0,15–0,25 0,6–4,0 ab
DNMG110408-MK5 0,8 0,15–0,40 0,6–4,0 ab
DNMG110412-MK5 1,2 0,20–0,50 1,0–4,0 ab
DNMG150408-MK5 0,8 0,20–0,45 0,8–5,0 ab
DNMG150412-MK5 1,2 0,25–0,45 1,2–5,0 ab
DNMG150608-MK5 0,8 0,25–0,45 0,8–5,0 ab
DNMG150612-MK5 1,2 0,30–0,45 1,2–5,0 ab
DNMG150616-MK5 1,6 0,35–0,45 1,6–5,0 ab
DNMG150408-NRS 0,8 0,13–0,32 1,0–4,0 ab ab
DNMG150608-NRS 0,8 0,13–0,32 1,0–4,0 ab ab
DNMG150612-NRS 1,2 0,15–0,35 1,2–4,0 ab ab
DNMG110408-NR4 0,8 0,22–0,40 1,2–3,0 bc bc
DNMG110412-NR4 1,2 0,25–0,50 1,5–3,5 bc bc
DNMG150408-NR4 0,8 0,22–0,40 1,2–4,0 bb bc bc
DNMG150608-NR4 0,8 0,22–0,40 1,2–4,0 bbabc abc
DNMG150612-NR4 1,2 0,25–0,50 1,5–4,0 bb bc bc
DNMG110408-RP5 0,8 0,18–0,35 0,8–4,0 aabc
DNMG110412-RP5 1,2 0,20–0,40 1,0–4,0 aabc
DNMG150408-RP5 0,8 0,15–0,35 0,8–5,0 aabc
DNMG150412-RP5 1,2 0,20–0,40 1,0–5,0 abc
DNMG150416-RP5 1,6 0,25–0,50 1,6–5,0 abc
DNMG150608-RP5 0,8 0,15–0,35 0,8–5,0 aabc b
DNMG150612-RP5 1,2 0,20–0,55 1,0–5,0 aabc b
DNMG150616-RP5 1,6 0,25–0,65 1,6–5,0 aabc
DNMA110404-RK5 0,4 0,16–0,25 0,6–4,0 ab
DNMA110408-RK5 0,8 0,18–0,40 0,6–4,0 ab
DNMA150408-RK5 0,8 0,15–0,50 0,8–4,0 ab
DNMA150412-RK5 1,2 0,20–0,60 1,5–4,0 ab
DNMA150608-RK5 0,8 0,20–0,45 0,8–5,0 ab
DNMA150612-RK5 1,2 0,25–0,45 1,2–5,0 ab
DNMA150608-RK7 0,8 0,20–0,45 0,8–5,0 ab
DNMA150612-RK7 1,2 0,25–0,45 1,2–5,0 ab
DNMM150608-NRF 0,8 0,25–0,45 0,8–5,0 abc

DNMM150612-NRF 1,2 0,30–0,50 1,2–5,0 aabc
DNMM150616-NRF 1,6 0,35–0,60 1,6–5,0 aabc
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Negative square
SNMG / SNMA / SNMM d
90˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WS10
r f ap
SNMG120404-NF4 0,4 0,05–0,12 0,2–1,0 ab ab
SNMG120408-NF4 0,8 0,07–0,16 0,4–1,5 ab ab
SNMG120412-NF4 1,2 0,10–0,20 0,5–1,6 ab ab
SNMG090308-FP5 0,8 0,06–0,20 0,2–1,5 ab

SNMG120404-FP5 0,4 0,04–0,22 0,1–1,8 ab
SNMG120408-FP5 0,8 0,08–0,25 0,2–2,0 ab
SNMG120412-FP5 1,2 0,10–0,25 0,5–2,5 ab
SNMG090308-MP3 0,8 0,10–0,32 0,6–3,0 ab
SNMG120404-MP3 0,4 0,08–0,25 0,3–2,5 ab
SNMG120408-MP3 0,8 0,12–0,35 0,6–3,2 abc
SNMG120412-MP3 1,2 0,16–0,40 0,8–3,5 ab
SNMG090308-MP5 0,8 0,10–0,32 0,6–3,0 bc
SNMG120408-MP5 0,8 0,18–0,40 0,6–5,0 aabc
SNMG120412-MP5 1,2 0,20–0,45 1,0–5,0 aabc
SNMG120416-MP5 1,6 0,25–0,50 1,2–5,0 aabc
SNMG150608-MP5 0,8 0,25–0,50 0,8–8,0 abc
SNMG150612-MP5 1,2 0,30–0,50 1,0–8,0 abc
SNMG150616-MP5 1,6 0,35–0,55 1,2–8,0 abc
SNMG120404-NM4 0,4 0,10–0,18 0,5–2,0 bc bc
SNMG120408-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
SNMG120412-NM4 1,2 0,18–0,30 0,8–3,5 bbabc abc
SNMG090308-MK5 0,8 0,10–0,20 0,2–3,0 ab

SNMG120408-MK5 0,8 0,25–0,50 0,8–5,0 ab
SNMG120412-MK5 1,2 0,30–0,50 1,2–5,0 ab
SNMG120416-MK5 1,6 0,35–0,50 1,5–5,0 ab
SNMG150612-MK5 1,2 0,30–0,60 1,2–7,0 ab
SNMG150616-MK5 1,6 0,35–0,60 1,5–7,0 ab
SNMG190612-MK5 1,2 0,30–0,65 1,2–8,0 ab
SNMG190616-MK5 1,6 0,35–0,80 1,5–8,0 ab
SNMG120412-NRT 1,2 0,25–0,50 0,8–6,0 b b b
SNMG150612-NRT 1,2 0,30–0,60 1,0–7,5 b b b
SNMG190616-NRT 1,6 0,40–0,80 1,5–9,0 b b b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Negative square
90˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WS10
r f ap
SNMG120408-NRS 0,8 0,20–0,40 0,8–5,0 abc abc
SNMG120412-NRS 1,2 0,22–0,45 1,0–5,0 abc abc
SNMG150616-NRS 1,6 0,24–0,55 1,2–7,0 ab ab
SNMG190612-NRS 1,2 0,24–0,55 1,0–9,0 ab ab
SNMG190616-NRS 1,6 0,27–0,60 1,2–9,0 ab ab
SNMG120408-NR4 0,8 0,22–0,40 1,2–4,0 bb bc bc
SNMG120412-NR4 1,2 0,25–0,50 1,5–5,0 bb bc bc
SNMG120416-NR4 1,6 0,30–0,55 2,0–5,0 bc bc
SNMG150608-NR4 0,8 0,22–0,45 1,2–7,0 bc bc
SNMG150612-NR4 1,2 0,25–0,60 1,5–7,0 bb bc bc
SNMG150616-NR4 1,6 0,30–0,65 2,0–7,0 bc bc
SNMG190612-NR4 1,2 0,25–0,60 1,5–8,0 bb bc bc
SNMG190616-NR4 1,6 0,30–0,80 2,0–8,0 bc bc
SNMG120408-RP5 0,8 0,20–0,50 0,8–6,0 abc
SNMG120412-RP5 1,2 0,25–0,65 1,0–6,0 aabc
SNMG120416-RP5 1,6 0,35–0,75 1,6–6,0 aabc
SNMG150612-RP5 1,2 0,25–0,70 1,2–8,0 aabc
SNMG150616-RP5 1,6 0,35–0,80 1,6–8,0 aabc
SNMG190612-RP5 1,2 0,30–0,70 1,2–10,0 abc
SNMG190616-RP5 1,6 0,35–0,80 1,6–10,0 abc
SNMG190624-RP5 2,4 0,44–1,20 2,0–10,0 abc
SNMG250924-RP5 2,4 0,55–1,20 2,5–12,0 abc
SNMG120408-RP7 0,8 0,25–0,50 0,8–5,0 abc
SNMG120412-RP7 1,2 0,30–0,50 1,2–5,0 abc
SNMG120416-RP7 1,6 0,35–0,60 1,5–5,0 abc
SNMG150608-RP7 0,8 0,30–0,50 0,8–6,0 bc
SNMG150612-RP7 1,2 0,35–0,60 1,2–6,0 abc c
SNMG150616-RP7 1,6 0,40–0,70 1,5–6,0 abc c
SNMG190612-RP7 1,2 0,35–0,60 1,2–7,0 abc
SNMG190616-RP7 1,6 0,40–0,70 1,5–7,0 abc c
SNMG190624-RP7 2,4 0,40–0,80 2,5–7,0 bc
SNMG250924-RP7 2,4 0,55–1,00 3,0–10,0 b c
SNMA090308-RK5 0,8 0,20–0,45 0,6–4,0 b
SNMA120408-RK5 0,8 0,25–0,50 0,8–5,0 ab
SNMA120412-RK5 1,2 0,30–0,60 1,2–5,0 ab
SNMA120416-RK5 1,6 0,35–0,70 1,5–5,0 ab
SNMA150612-RK5 1,2 0,30–0,65 1,2–7,0 ab
SNMA150616-RK5 1,6 0,35–0,80 1,5–7,0 ab
SNMA190612-RK5 1,2 0,30–0,65 1,2–8,0 ab
SNMA190616-RK5 1,6 0,35–0,80 1,5–8,0 ab
SNMA190624-RK5 2,4 0,40–0,90 2,5–8,0 b
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Negative square
90˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WAK30
WS10
r f ap
SNMA120408-RK7 0,8 0,25–0,50 0,8–5,0 ab
SNMA120412-RK7 1,2 0,30–0,60 1,2–5,0 ab
SNMA120416-RK7 1,6 0,35–0,70 1,5–5,0 ab
SNMA150616-RK7 1,6 0,35–0,80 1,5–7,0 ab
SNMA190616-RK7 1,6 0,35–0,80 1,5–8,0 ab
SNMM120408-NRF 0,8 0,30–0,50 0,8–7,0 bc
SNMM120412-NRF 1,2 0,35–0,70 1,2–7,0 abc
SNMM120416-NRF 1,6 0,40–0,90 1,6–7,0 abc
SNMM150612-NRF 1,2 0,35–0,75 1,2–9,0 abc
SNMM150616-NRF 1,6 0,40–0,90 1,6–9,0 abc
SNMM150624-NRF 2,4 0,45–1,10 2,0–9,0 abc
SNMM190612-NRF 1,2 0,35–0,75 1,2–10,0 abc
SNMM190616-NRF 1,6 0,40–1,00 1,6–10,0 abc
SNMM190624-NRF 2,4 0,45–1,20 2,0–10,0 abc
SNMM250716-NRF 1,6 0,45–1,00 1,6–12,0 bc
SNMM250724-NRF 2,4 0,55–1,20 2,5–12,0 bc
SNMM250916-NRF 1,6 0,45–1,00 1,6–12,0 abc
SNMM250924-NRF 2,4 0,55–1,20 2,5–12,0 bc
SNMM150612-NRR 1,2 0,50–0,80 1,5–10,0 bc
SNMM150616-NRR 1,6 0,45–1,00 2,0–12,0 abc
SNMM150624-NRR 2,4 0,50–1,40 2,5–12,0 bc
SNMM190612-NRR 1,2 0,50–1,00 2,0–13,0 abc
SNMM190616-NRR 1,6 0,50–1,10 2,5–13,0 abc c
SNMM190624-NRR 2,4 0,60–1,60 3,0–13,0 abc c
SNMM250716-NRR 1,6 0,50–1,10 2,5–17,0 abc c
SNMM250724-NRR 2,4 0,60–1,60 3,0–17,0 abc c
SNMM250732-NRR 3,2 0,60–1,80 4,0–17,0 bc
SNMM250916-NRR 1,6 0,50–1,10 2,5–17,0 abc
SNMM250924-NRR 2,4 0,60–1,60 3,0–17,0 abc c
SNMM250932-NRR 3,2 0,60–1,80 4,0–17,0 bc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
60˚ r
Negative triangular 60°
TNMG / TNMA / TNMM d
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WS10
r f ap
TNMG160404-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab
TNMG160408-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
TNMG160412-NF4 1,2 0,10–0,20 0,5–1,6 ab ab
TNMG110304-FP5 0,4 0,04–0,15 0,1–1,2 ab

TNMG110308-FP5 0,8 0,08–0,20 0,2–1,5 ab
TNMG160404-FP5 0,4 0,04–0,20 0,1–1,5 ab
TNMG160408-FP5 0,8 0,08–0,25 0,2–2,0 ab
TNMG160412-FP5 1,2 0,10–0,25 0,5–2,5 ab
TNMG160404-NMT 0,4 0,08–0,20 0,6–3,0 b b b
TNMG160408-NMT 0,8 0,12–0,30 1,0–4,0 b b b
TNMG160404-NMS 0,4 0,09–0,22 0,6–2,5 abc abc

TNMG160408-NMS 0,8 0,11–0,30 0,8–3,5 abc abc
TNMG110304-MP3 0,4 0,06–0,18 0,3–2,0 ab

TNMG110308-MP3 0,8 0,10–0,25 0,6–2,2 ab
TNMG160304-MP3 0,4 0,08–0,22 0,3–2,2 b
TNMG160308-MP3 0,8 0,12–0,32 0,6–3,0 b
TNMG160404-MP3 0,4 0,08–0,22 0,3–2,2 abc
TNMG160408-MP3 0,8 0,12–0,32 0,6–3,0 aabc
TNMG160412-MP3 1,2 0,16–0,40 0,8–3,2 aabc
TNMG220408-MP3 0,8 0,12–0,32 0,6–3,2 aabc
TNMG220412-MP3 1,2 0,16–0,40 0,8–3,5 aabc
TNMG160308-MP5 0,8 0,18–0,35 0,6–4,0 bc a
TNMG160404-MP5 0,4 0,16–0,25 0,5–4,0 abc
TNMG160408-MP5 0,8 0,18–0,35 0,6–4,0 aabc
TNMG160412-MP5 1,2 0,20–0,40 1,0–4,0 aabc
TNMG220404-MP5 0,4 0,16–0,25 0,7–4,0 ab
TNMG220408-MP5 0,8 0,18–0,35 0,8–5,0 abc
TNMG220412-MP5 1,2 0,20–0,40 1,0–5,0 abc
TNMG220416-MP5 1,6 0,25–0,45 1,2–5,0 ab
TNMG270608-MP5 0,8 0,25–0,45 0,8–7,0 abc
TNMG270612-MP5 1,2 0,30–0,50 1,0–7,0 abc
TNMG270616-MP5 1,6 0,35–0,55 1,2–7,0 abc
TNMG160404-NM4 0,4 0,10–0,18 0,5–2,0 bbabc abc
TNMG160408-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
TNMG160412-NM4 1,2 0,18–0,30 0,8–3,5 bbabc abc
TNMG160416-NM4 1,6 0,20–0,35 1,0–4,0 bc bc
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
60˚ r
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WS10
r f ap
TNMG110308-MK5 0,8 0,20–0,40 0,8–3,5 ab
TNMG160404-MK5 0,4 0,16–0,25 0,6–4,0 ab
TNMG160408-MK5 0,8 0,25–0,45 0,8–5,0 ab
TNMG160412-MK5 1,2 0,30–0,45 1,2–5,0 ab
TNMG160416-MK5 1,6 0,35–0,45 1,5–5,0 ab
TNMG220408-MK5 0,8 0,25–0,45 1,0–6,0 ab
TNMG220412-MK5 1,2 0,30–0,45 1,4–6,0 ab
TNMG220416-MK5 1,6 0,35–0,45 1,6–6,0 ab
TNMG270612-MK5 1,2 0,35–0,65 1,2–8,0 ab
TNMG270616-MK5 1,6 0,45–0,90 3,0–9,0 ab
TNMG160412-NRS 1,2 0,25–0,50 1,5–4,5 ab ab
TNMG160408-NR4 0,8 0,22–0,40 1,2–4,0 bb bc bc

TNMG160412-NR4 1,2 0,25–0,50 1,5–4,5 bb bc bc
TNMG220408-NR4 0,8 0,22–0,40 1,2–5,0 bb bc bc
TNMG220412-NR4 1,2 0,25–0,55 1,5–6,0 bb bc bc
TNMG270612-NR4 1,2 0,35–0,65 1,2–8,0 bc bc
TNMG160408-RP5 0,8 0,20–0,40 0,8–5,0 aabc ab
TNMG160412-RP5 1,2 0,25–0,55 1,0–5,0 aabc ab
TNMG220408-RP5 0,8 0,20–0,45 0,8–7,0 abc
TNMG220412-RP5 1,2 0,25–0,60 1,0–7,0 aabc
TNMG220416-RP5 1,6 0,35–0,70 1,6–7,0 aabc
TNMG270612-RP5 1,2 0,35–0,70 1,6–10,0 abc
TNMG270616-RP5 1,6 0,35–0,80 2,0–10,0 abc
TNMG330924-RP5 2,4 0,45–1,20 2,5–13,0 abc
TNMG270616-RP7 1,6 0,45–0,90 3,0–9,0 b
TNMG270624-RP7 2,4 0,55–1,00 3,0–9,0 b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
60˚ r
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WS10
r f ap
TNMA110308-RK5 0,8 0,15–0,35 1,0–4,0 b
TNMA160404-RK5 0,4 0,16–0,25 0,6–5,0 ab
TNMA160408-RK5 0,8 0,25–0,45 0,8–5,0 ab
TNMA160412-RK5 1,2 0,30–0,50 1,2–5,0 ab
TNMA160416-RK5 1,6 0,25–0,60 1,5–5,0 ab
TNMA220408-RK5 0,8 0,25–0,45 1,0–6,0 ab
TNMA220412-RK5 1,2 0,30–0,55 1,4–6,0 ab
TNMA220416-RK5 1,6 0,35–0,60 1,6–6,0 b
TNMA270616-RK5 1,6 0,40–0,65 1,8–7,0 b
TNMA160408-RK7 0,8 0,25–0,45 0,8–5,0 ab
TNMA160412-RK7 1,2 0,30–0,50 1,2–5,0 ab
TNMA220408-RK7 0,8 0,25–0,45 1,0–6,0 ab
TNMA220412-RK7 1,2 0,30–0,55 1,4–6,0 ab
TNMM160408-NRF 0,8 0,30–0,45 0,8–6,0 abc
TNMM160412-NRF 1,2 0,35–0,50 1,2–6,0 abc
TNMM220408-NRF 0,8 0,30–0,50 0,8–7,0 abc
TNMM220412-NRF 1,2 0,35–0,60 1,2–7,0 abc
TNMM220416-NRF 1,6 0,40–0,80 1,6–7,0 abc
TNMM270612-NRF 1,2 0,35–0,65 1,2–8,0 bc
TNMM270616-NRF 1,6 0,40–0,85 1,6–8,0 bc
TNMM270616-NRR 1,6 0,50–1,10 2,0–13,0 bc
TNMM270624-NRR 2,4 0,60–1,60 3,0–13,0 bc
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
VNMG / VNGG / VNMA d
Tiger·tec® Silver 35˚

l s
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WS10
r f ap
VNMG160404-NFT 0,4 0,05–0,15 0,2–1,5 b b b
VNMG160408-NFT 0,8 0,07–0,18 0,3–2,0 b b b
VNGG160404-NFT 0,4 0,04–0,13 0,1–1,5 b

VNGG160408-NFT 0,8 0,06–0,16 0,2–2,0 b
VNGG160412-NFT 1,2 0,06–0,16 0,2–2,0 b
VNMG160404-FP5 0,4 0,04–0,22 0,1–1,5 ab
VNMG160408-FP5 0,8 0,08–0,25 0,2–2,0 ab
VNMG160404-NMS 0,4 0,08–0,16 0,5–1,5 ab ab

VNMG160408-NMS 0,8 0,10–0,22 0,8–2,2 ab ab
VNMG160404-MP3 0,4 0,08–0,22 0,3–2,2 abc

VNMG160408-MP3 0,8 0,12–0,32 0,6–3,0 abc
VNMG160412-MP3 1,2 0,16–0,35 0,8–3,2 abc
VNMG160404-MP5 0,4 0,10–0,18 0,5–2,0 abc
VNMG160408-MP5 0,8 0,18–0,35 0,6–4,0 abc
VNMG160412-MP5 1,2 0,20–0,40 0,8–4,0 abc
VNMG220408-MP5 0,8 0,18–0,35 0,6–4,0 ab
VNMG160404-NM4 0,4 0,10–0,18 0,5–2,0 bbabc abc
VNMG160408-NM4 0,8 0,15–0,25 0,8–3,0 bbabc abc
VNMG160404-MK5 0,4 0,16–0,25 0,6–4,0 ab

VNMG160408-MK5 0,8 0,18–0,35 0,8–4,0 ab
VNMG160412-MK5 1,2 0,20–0,35 1,0–4,0 ab
VNMA160404-RK5 0,4 0,16–0,25 0,6–4,0 ab
VNMA160408-RK5 0,8 0,18–0,35 0,8–4,0 ab
VNMA160412-RK5 1,2 0,20–0,40 1,0–4,0 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Negative Trigon 80°
WNMG / WNMA / WNMM d
®
Tiger·tec Silver l s
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
WNMG060404-NF 0,4 0,10–0,40 0,4–2,0 a a b b
WNMG060408-NF 0,8 0,15–0,50 0,5–3,0 a a b b
WNMG080404-NF 0,4 0,20–0,40 0,4–2,0 a a b b
WNMG080408-NF 0,8 0,25–0,55 0,5–3,0 a a b b
WNMG080412-NF 1,2 0,25–0,70 0,8–3,0 a b b
WNMG060404-NF4 0,4 0,05–0,12 0,2–1,0 ab ab
WNMG060408-NF4 0,8 0,07–0,16 0,4–1,5 ab ab
WNMG080404-NF4 0,4 0,05–0,12 0,2–1,0 bbab ab
WNMG080408-NF4 0,8 0,07–0,16 0,4–1,5 bbab ab
WNMG080412-NF4 1,2 0,10–0,20 0,5–1,6 ab ab
WNMG060404-FP5 0,4 0,04–0,20 0,1–1,5 ab
WNMG060408-FP5 0,8 0,08–0,25 0,2–2,0 ab
WNMG080404-FP5 0,4 0,05–0,20 0,1–1,5 ab
WNMG080408-FP5 0,8 0,08–0,25 0,2–2,0 ab
WNMG080412-FP5 1,2 0,10–0,25 0,5–2,5 ab
WNMG060408-NM 0,8 0,20–0,55 0,8–3,0 a a
WNMG060412-NM 1,2 0,25–0,55 1,5–4,0 a a
WNMG080408-NM 0,8 0,20–0,55 0,8–3,0 ab b ab b
WNMG080412-NM 1,2 0,25–0,70 1,5–4,0 ab b ab b
WNMG080408-NMT 0,8 0,12–0,30 0,8–4,0 b b b

WNMG080412-NMT 1,2 0,15–0,32 1,0–4,0 b b b
WNMG060408-NMS 0,8 0,10–0,30 0,8–3,0 ab ab

WNMG080404-NMS 0,4 0,10–0,24 0,6–2,5 abc abc
WNMG080408-NMS 0,8 0,13–0,32 0,8–3,5 abc abc
WNMG060404-MP3 0,4 0,08–0,22 0,3–2,2 abc

WNMG060408-MP3 0,8 0,12–0,32 0,6–3,0 abc
WNMG060412-MP3 1,2 0,16–0,35 0,8–3,2 abc
WNMG080404-MP3 0,4 0,08–0,22 0,3–2,5 abc
WNMG080408-MP3 0,8 0,12–0,32 0,6–3,2 aabc
WNMG080412-MP3 1,2 0,16–0,40 0,8–3,5 aabc
WNMG080416-MP3 1,6 0,20–0,50 0,9–4,0 ab
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
®
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
WNMG060404-MP5 0,4 0,16–0,25 0,5–4,0 abc
WNMG060408-MP5 0,8 0,18–0,35 0,6–4,0 aabc
WNMG060412-MP5 1,2 0,20–0,40 1,0–4,0 aabc
WNMG080404-MP5 0,4 0,16–0,25 0,5–4,0 abc
WNMG080408-MP5 0,8 0,18–0,40 0,6–5,0 aabc
WNMG080412-MP5 1,2 0,20–0,45 1,0–5,0 aabc
WNMG080416-MP5 1,6 0,25–0,50 1,2–5,0 abc
WNMG100608-MP5 0,8 0,25–0,40 0,8–7,0 abc
WNMG100612-MP5 1,2 0,30–0,50 1,0–7,0 abc
WNMG100616-MP5 1,6 0,35–0,55 1,2–7,0 abc
WNMG060404-NM4 0,4 0,10–0,18 0,5–2,0 bbabc abc
WNMG060408-NM4 0,8 0,15–0,25 0,8–2,5 bbabc abc
WNMG060412-NM4 1,2 0,18–0,30 0,8–3,0 bc bc
WNMG080404-NM4 0,4 0,10–0,20 0,5–3,0 bbabc abc
WNMG080408-NM4 0,8 0,15–0,32 0,8–3,0 bbabc abc
WNMG080412-NM4 1,2 0,15–0,35 0,8–3,5 bbabc abc
WNMG080416-NM4 1,6 0,15–0,40 1,0–4,0 bc bc
WNMG100608-NM4 0,8 0,18–0,40 0,8–4,5 bc bc
WNMG100612-NM4 1,2 0,20–0,45 0,8–4,5 bc bc
WNMG060404-MK5 0,4 0,16–0,25 0,6–4,0 ab
WNMG060408-MK5 0,8 0,20–0,40 0,8–4,0 ab
WNMG060412-MK5 1,2 0,16–0,45 0,6–4,0 ab
WNMG080404-MK5 0,4 0,16–0,25 0,6–5,0 ab
WNMG080408-MK5 0,8 0,20–0,45 1,2–5,0 ab
WNMG080412-MK5 1,2 0,22–0,50 1,5–5,0 ab
WNMG080416-MK5 1,6 0,25–0,55 2,0–5,0 ab
WNMG100608-MK5 0,8 0,25–0,50 0,8–7,0 ab
WNMG100612-MK5 1,2 0,30–0,60 1,2–7,0 ab
WNMG100616-MK5 1,6 0,35–0,60 1,5–7,0 ab
WNMG080408-NRS 0,8 0,16–0,35 1,0–4,0 ab ab
WNMG080412-NRS 1,2 0,18–0,40 1,2–4,0 ab ab
WNMG060408-NR4 0,8 0,22–0,40 1,2–3,5 bc bc

WNMG080408-NR4 0,8 0,22–0,40 1,2–4,5 bbabc abc
WNMG080412-NR4 1,2 0,25–0,50 1,5–4,5 bbabc abc
WNMG100612-NR4 1,2 0,25–0,60 1,5–6,0 bc bc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
®
80˚
Indexable inserts
P M K S
HC HC HC HC HW
WMP20S
WMP20S
WKK20S
WKP30S
WPP05S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
WS10
r f ap
WNMG060408-RP5 0,8 0,20–0,40 0,8–4,0 abc
WNMG060412-RP5 1,2 0,25–0,50 1,0–4,0 abc
WNMG080408-RP5 0,8 0,20–0,40 0,8–6,0 aabc ab
WNMG080412-RP5 1,2 0,25–0,60 1,0–6,0 aabc ab
WNMG080416-RP5 1,6 0,35–0,70 1,6–6,0 aabc
WNMG100612-RP5 1,2 0,25–0,60 1,2–8,0 aabc
WNMG100616-RP5 1,6 0,35–0,70 1,6–8,0 aabc
WNMG080408-RP7 0,8 0,16–0,45 1,0–5,0 abc
WNMG080412-RP7 1,2 0,20–0,45 1,5–5,0 abc
WNMG100608-RP7 0,8 0,30–0,50 0,8–6,0 bc
WNMG100612-RP7 1,2 0,35–0,60 1,2–6,0 abc
WNMG100616-RP7 1,6 0,40–0,60 1,5–6,0 bc
WNMA060404-RK5 0,4 0,16–0,25 0,6–4,0 ab
WNMA060408-RK5 0,8 0,20–0,40 0,8–4,0 ab
WNMA060412-RK5 1,2 0,22–0,50 1,2–4,0 ab
WNMA080404-RK5 0,4 0,16–0,25 0,6–5,0 ab
WNMA080408-RK5 0,8 0,20–0,45 1,2–5,0 ab
WNMA080412-RK5 1,2 0,22–0,50 1,5–5,0 ab
WNMA100612-RK5 1,2 0,25–0,60 1,5–6,0 ab
WNMA100616-RK5 1,6 0,30–0,65 1,5–6,0 ab
WNMA060408-RK7 0,8 0,20–0,40 0,8–4,0 ab
WNMA080408-RK7 0,8 0,20–0,45 1,2–5,0 ab
WNMA080412-RK7 1,2 0,22–0,50 1,5–5,0 ab
WNMM080412-NRF 1,2 0,35–0,60 1,2–6,0 abc

WNMM100612-NRF 1,2 0,35–0,70 1,2–8,0 abc
WNMM100616-NRF 1,6 0,40–0,90 1,6–8,0 abc
Ra/Rz
A 234 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive rhombic 80°
CCMT / CCGT / CCMW d
Tiger·tec® Silver 80˚ l

7˚
s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
Designation mm mm mm mm
CCMT060204-PF 6,45 0,4 0,05–0,30 0,3–2,0 aab bc bc
CCMT060208-PF 6,45 0,8 0,09–0,35 0,3–2,0 ab b b
CCMT09T304-PF 9,67 0,4 0,07–0,30 0,3–3,0 aab bc bc
CCMT09T308-PF 9,67 0,8 0,12–0,45 0,3–3,0 aab bc bc
CCGT060201-PF2 6,45 0,1 0,02–0,06 0,1–1,5 b a b

CCGT060202-PF2 6,45 0,2 0,05–0,12 0,2–2,0 b aa b
CCGT060204-PF2 6,45 0,4 0,08–0,25 0,2–2,5 b aa b
CCGT09T301-PF2 9,67 0,1 0,02–0,06 0,1–1,5 b a b
CCGT09T302-PF2 9,67 0,2 0,05–0,12 0,2–2,0 b aa b
CCGT09T304-PF2 9,67 0,4 0,08–0,25 0,2–2,5 ab aa ab
CCGT09T308-PF2 9,67 0,8 0,10–0,30 0,3–3,0 ab aa ab
CCGT120404-PF2 12,90 0,4 0,08–0,25 0,2–3,0 b aa b
CCGT120408-PF2 12,90 0,8 0,10–0,30 0,3–3,5 b aa b
CCMT060202-FM4 6,45 0,2 0,04–0,12 0,1–1,0 bbabc abc
CCMT060204-FM4 6,45 0,4 0,05–0,16 0,1–1,5 bbabc abc
CCMT060208-FM4 6,45 0,8 0,08–0,20 0,1–1,5 bb bc bc
CCMT09T302-FM4 9,67 0,2 0,04–0,12 0,1–1,0 bbabc abc
CCMT120404-FM4 12,90 0,4 0,05–0,16 0,1–1,5 abc abc
CCMT120408-FM4 12,90 0,8 0,08–0,20 0,1–1,5 abc abc
CCMT060202-FP4 6,45 0,2 0,04–0,12 0,1–1,0 ab
CCMT060204-FP4 6,45 0,4 0,05–0,16 0,1–1,5 ab
CCMT060208-FP4 6,45 0,8 0,08–0,20 0,1–1,5 ab
CCMT09T302-FP4 9,67 0,2 0,04–0,12 0,1–1,0 ab
CCMT09T304-FP4 9,67 0,4 0,05–0,16 0,1–1,5 ab
CCMT09T308-FP4 9,67 0,8 0,08–0,20 0,1–1,5 ab
CCMT120404-FP4 12,90 0,4 0,05–0,16 0,1–1,5 ab
CCMT120408-FP4 12,90 0,8 0,08–0,20 0,1–1,5 ab
CCMT060202-PF4 6,45 0,2 0,04–0,12 0,1–1,0 a
CCMT060204-PF4 6,45 0,4 0,05–0,16 0,1–1,5 a
CCMT060208-PF4 6,45 0,8 0,08–0,20 0,1–1,5 a
CCMT09T302-PF4 9,67 0,2 0,04–0,12 0,1–1,0 a
CCMT09T304-PF4 9,67 0,4 0,05–0,16 0,1–1,5 a
CCMT09T308-PF4 9,67 0,8 0,08–0,20 0,1–1,5 a
CCMT120404-PF4 12,90 0,4 0,05–0,16 0,1–1,5 a
CCMT120408-PF4 12,90 0,8 0,08–0,20 0,1–1,5 a
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r

7˚
s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
CCGT060202-PF5 6,45 0,2 0,04–0,10 0,1–0,6 c c
CCGT060204-PF5 6,45 0,4 0,06–0,12 0,2–0,6 c c
CCGT09T302-PF5 9,67 0,2 0,04–0,10 0,1–1,0 c c
CCGT09T304-PF5 9,67 0,4 0,06–0,12 0,2–1,0 c c
CCMT060204-PS5 6,45 0,4 0,06–0,18 0,3–2,0 bc bc
CCMT060208-PS5 6,45 0,8 0,10–0,20 0,5–2,0 bc bc
CCMT09T304-PS5 9,67 0,4 0,08–0,20 0,3–2,0 bc bc
CCMT09T308-PS5 9,67 0,8 0,12–0,32 0,5–2,0 bc bc
CCMT120404-PS5 12,90 0,4 0,10–0,25 0,3–2,5 bc bc
CCMT120408-PS5 12,90 0,8 0,12–0,32 0,5–2,5 bc bc
CCMT060204-FP6 6,45 0,4 0,06–0,18 0,3–2,0 ab
CCMT060208-FP6 6,45 0,8 0,10–0,20 0,5–2,0 b
CCMT09T304-FP6 9,67 0,4 0,08–0,20 0,3–2,0 ab
CCMT09T308-FP6 9,67 0,8 0,12–0,32 0,5–2,0 ab
CCMT120404-FP6 12,90 0,4 0,10–0,25 0,3–2,5 b
CCMT120408-FP6 12,90 0,8 0,12–0,32 0,5–2,5 b
CCMT060204-FK6 6,45 0,4 0,06–0,18 0,3–2,0 ab
CCMT060208-FK6 6,45 0,8 0,10–0,20 0,5–2,0 ab
CCMT09T304-FK6 9,67 0,4 0,08–0,20 0,3–2,0 ab
CCMT09T308-FK6 9,67 0,8 0,10–0,25 0,5–2,0 ab
CCMT120404-FK6 12,90 0,4 0,10–0,25 0,3–2,5 ab
CCMT120408-FK6 12,90 0,8 0,12–0,32 0,5–2,5 ab
CCMT09T304-PM 9,67 0,4 0,12–0,40 0,5–4,0 ab ab
CCMT09T308-PM 9,67 0,8 0,15–0,50 0,7–4,0 ab ab
CCMT09T312-PM 9,67 1,2 0,17–0,50 0,7–4,0 b ab
CCMT120408-PM 12,90 0,8 0,15–0,50 0,7–4,0 b ab
CCGT060201-PM2 6,45 0,1 0,02–0,06 0,5–1,5 aa

CCGT060202-PM2 6,45 0,2 0,05–0,12 0,5–2,0 aa
CCGT060204-PM2 6,45 0,4 0,08–0,25 0,6–3,0 aa
CCGT09T301-PM2 9,67 0,1 0,02–0,06 0,5–1,5 aa
CCGT09T302-PM2 9,67 0,2 0,05–0,12 0,5–2,0 aa
CCGT09T304-PM2 9,67 0,4 0,08–0,25 0,6–4,0 aa
CCGT09T308-PM2 9,67 0,8 0,10–0,35 0,8–4,0 aa
CCGT120402-PM2 12,90 0,2 0,05–0,12 0,5–2,0 aa
CCGT120404-PM2 12,90 0,4 0,08–0,25 0,6–5,0 aa
CCGT120408-PM2 12,90 0,8 0,10–0,35 0,8–5,0 aa
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r

7˚
s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
CCMT060204-MM4 6,45 0,4 0,08–0,20 0,4–2,0 bbab ab
CCMT060208-MM4 6,45 0,8 0,12–0,25 0,5–2,0 bb b b
CCMT09T304-MM4 9,67 0,4 0,08–0,25 0,4–3,0 bbab ab
CCMT09T308-MM4 9,67 0,8 0,12–0,32 0,5–3,0 bbab ab
CCMT120404-MM4 12,90 0,4 0,12–0,25 0,4–3,5 b b
CCMT120408-MM4 12,90 0,8 0,12–0,32 0,5–3,5 ab ab
CCGT060204-MM4 6,45 0,4 0,08–0,20 0,4–2,0 b b
CCGT060208-MM4 6,45 0,8 0,12–0,25 0,5–2,0 b b
CCGT09T304-MM4 9,67 0,4 0,08–0,25 0,4–3,0 b b
CCGT09T308-MM4 9,67 0,8 0,12–0,32 0,5–3,0 b b
CCGT120408-MM4 12,90 0,8 0,12–0,32 0,5–3,5 b b
CCMT060204-MP4 6,45 0,4 0,08–0,20 0,4–2,0 ab
CCMT060208-MP4 6,45 0,8 0,12–0,25 0,5–2,0 ab
CCMT09T304-MP4 9,67 0,4 0,08–0,25 0,4–3,0 ab
CCMT09T308-MP4 9,67 0,8 0,12–0,32 0,5–3,0 ab
CCMT120404-MP4 12,90 0,4 0,12–0,25 0,4–3,5 ab
CCMT120408-MP4 12,90 0,8 0,12–0,32 0,5–3,5 ab
CCGT060204-MP4 6,45 0,4 0,08–0,20 0,4–2,0 ab
CCGT060208-MP4 6,45 0,8 0,12–0,25 0,5–2,0 ab
CCGT09T304-MP4 9,67 0,4 0,08–0,25 0,4–3,0 ab
CCGT09T308-MP4 9,67 0,8 0,12–0,32 0,5–3,0 ab
CCGT120408-MP4 12,90 0,8 0,12–0,32 0,5–3,5 ab
CCMT060204-MK4 6,45 0,4 0,08–0,20 0,4–2,0 ab
CCMT060208-MK4 6,45 0,8 0,12–0,25 0,5–2,0 ab
CCMT09T304-MK4 9,67 0,4 0,08–0,25 0,4–3,0 ab
CCMT09T308-MK4 9,67 0,8 0,12–0,32 0,5–3,0 ab
CCMT120404-MK4 12,90 0,4 0,12–0,25 0,4–3,5 ab
CCMT120408-MK4 12,90 0,8 0,12–0,32 0,5–3,5 ab
CCGT060204-MK4 6,45 0,4 0,08–0,20 0,4–2,0 b
CCGT060208-MK4 6,45 0,8 0,12–0,25 0,5–2,0 b
CCGT09T304-MK4 9,67 0,4 0,08–0,25 0,4–3,0 b
CCGT09T308-MK4 9,67 0,8 0,12–0,32 0,5–3,0 b
CCGT120408-MK4 12,90 0,8 0,12–0,32 0,5–3,5 b
CCMT060204-RM4 6,45 0,4 0,12–0,25 0,4–2,5 bbabc abc
CCMT060208-RM4 6,45 0,8 0,16–0,30 0,6–2,5 bbabc abc
CCMT09T304-RM4 9,67 0,4 0,12–0,25 0,4–3,0 bbabc abc
CCMT09T308-RM4 9,67 0,8 0,16–0,35 0,6–4,0 bbabc abc
CCMT120404-RM4 12,90 0,4 0,12–0,25 0,4–3,0 bbabc abc
CCMT120408-RM4 12,90 0,8 0,16–0,40 0,6–5,0 bbabc abc
CCMT120412-RM4 12,90 1,2 0,20–0,50 0,8–5,0 bb bc bc
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r

7˚
s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
CCMT060204-RP4 6,45 0,4 0,12–0,25 0,4–2,5 abc
CCMT060208-RP4 6,45 0,8 0,16–0,30 0,6–2,5 abc
CCMT09T304-RP4 9,67 0,4 0,12–0,25 0,4–3,0 abc
CCMT09T308-RP4 9,67 0,8 0,16–0,35 0,6–4,0 abc
CCMT120404-RP4 12,90 0,4 0,12–0,30 0,4–4,0 abc
CCMT120408-RP4 12,90 0,8 0,16–0,40 0,6–5,0 abc
CCMT120412-RP4 12,90 1,2 0,20–0,50 0,8–5,0 abc
CCMT060204-RK4 6,45 0,4 0,12–0,25 0,4–2,5 ab
CCMT060208-RK4 6,45 0,8 0,16–0,30 0,6–2,5 ab
CCMT09T304-RK4 9,67 0,4 0,12–0,25 0,4–3,0 ab
CCMT09T308-RK4 9,67 0,8 0,16–0,35 0,6–4,0 ab
CCMT120404-RK4 12,90 0,4 0,12–0,30 0,4–4,0 ab
CCMT120408-RK4 12,90 0,8 0,16–0,40 0,6–5,0 ab
CCMT120412-RK4 12,90 1,2 0,20–0,50 0,8–5,0 ab
CCMW060202-RK6 6,45 0,2 0,08–0,12 0,2–2,5 ab
CCMW060204-RK6 6,45 0,4 0,12–0,25 0,4–2,5 ab
CCMW060208-RK6 6,45 0,8 0,16–0,30 0,5–2,5 ab
CCMW09T304-RK6 9,67 0,4 0,12–0,25 0,4–3,0 ab
CCMW09T308-RK6 9,67 0,8 0,16–0,35 0,5–4,0 ab
CCMW120404-RK6 12,90 0,4 0,12–0,30 0,4–4,0 ab
CCMW120408-RK6 12,90 0,8 0,16–0,40 0,6–5,0 b
CCMW120412-RK6 12,90 1,2 0,20–0,50 0,8–5,0 b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
CPMT / CPGT d

11˚
s
Indexable inserts
P M K S
HC HC HC HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
l r f ap
CPMT060204-MM4 6,45 0,4 0,08–0,20 0,4–2,0 b b
CPMT060208-MM4 6,45 0,8 0,12–0,25 0,5–2,0 b b
CPMT09T304-MM4 9,67 0,4 0,08–0,25 0,4–3,0 b b
CPMT09T308-MM4 9,67 0,8 0,12–0,32 0,5–3,0 b b
CPGT050204-MM4 5,56 0,4 0,08–0,20 0,4–1,5 b b
CPGT060204-MM4 6,45 0,4 0,08–0,20 0,4–2,0 b b
CPGT060208-MM4 6,45 0,8 0,12–0,25 0,5–2,0 b b
CPGT09T304-MM4 9,67 0,4 0,08–0,25 0,4–3,0 b b
CPGT09T308-MM4 9,67 0,8 0,12–0,32 0,5–3,0 b b
CPMT060204-MP4 6,45 0,4 0,08–0,20 0,4–2,0 b
CPMT060208-MP4 6,45 0,8 0,12–0,25 0,5–2,0 b
CPMT09T304-MP4 9,67 0,4 0,08–0,25 0,4–3,0 b
CPMT09T308-MP4 9,67 0,8 0,12–0,32 0,5–3,0 b
CPGT050204-MP4 5,56 0,4 0,08–0,20 0,4–1,5 b
CPGT060204-MP4 6,45 0,4 0,08–0,20 0,4–2,0 ab
CPGT060208-MP4 6,45 0,8 0,12–0,25 0,5–2,0 ab
CPGT09T304-MP4 9,67 0,4 0,08–0,25 0,4–3,0 ab
CPGT09T308-MP4 9,67 0,8 0,12–0,32 0,5–3,0 ab
CPMT060204-MK4 6,45 0,4 0,08–0,20 0,4–2,0 b
CPMT060208-MK4 6,45 0,8 0,12–0,25 0,5–2,0 b
CPMT09T304-MK4 9,67 0,4 0,08–0,25 0,4–3,0 b
CPMT09T308-MK4 9,67 0,8 0,12–0,32 0,5–3,0 b
CPGT050204-MK4 5,56 0,4 0,08–0,20 0,4–1,5 b
CPGT060204-MK4 6,45 0,4 0,08–0,20 0,4–2,0 b
CPGT060208-MK4 6,45 0,8 0,12–0,25 0,5–2,0 b
CPGT09T304-MK4 9,67 0,4 0,08–0,25 0,4–3,0 b
CPGT09T308-MK4 9,67 0,8 0,12–0,32 0,5–3,0 b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
DCMT / DCGT / DCMW d
7˚
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
DCMT070204-PF 7,75 0,4 0,05–0,25 0,3–2,0 aab bc bc
DCMT11T304-PF 11,63 0,4 0,07–0,30 0,3–3,0 aab bc bc
DCMT11T308-PF 11,63 0,8 0,12–0,40 0,3–3,0 aab bc bc
DCGT070201-PF2 7,75 0,1 0,02–0,06 0,1–1,5 b a b

DCGT070202-PF2 7,75 0,2 0,05–0,12 0,2–2,0 b aa b
DCGT070204-PF2 7,75 0,4 0,08–0,25 0,2–2,5 b aa b
DCGT11T301-PF2 11,63 0,1 0,02–0,06 0,1–1,5 b a b
DCGT11T302-PF2 11,63 0,2 0,05–0,12 0,2–2,0 b aa b
DCGT11T304-PF2 11,63 0,4 0,08–0,25 0,2–2,5 ab aa ab
DCGT11T308-PF2 11,63 0,8 0,10–0,30 0,3–3,0 ab aa ab
DCMT070202-FM4 7,75 0,2 0,04–0,12 0,1–1,0 abc abc
DCMT070204-FM4 7,75 0,4 0,05–0,16 0,1–1,5 bbabc abc
DCMT070208-FM4 7,75 0,8 0,08–0,20 0,1–1,5 ab ab
DCMT11T302-FM4 11,63 0,2 0,04–0,12 0,1–1,0 bbabc abc
DCMT070202-FP4 7,75 0,2 0,04–0,12 0,1–1,0 ab
DCMT070204-FP4 7,75 0,4 0,05–0,16 0,1–1,5 ab
DCMT070208-FP4 7,75 0,8 0,08–0,20 0,1–1,5 ab
DCMT11T302-FP4 11,63 0,2 0,04–0,12 0,1–1,0 ab
DCMT11T304-FP4 11,63 0,4 0,05–0,16 0,1–1,5 ab
DCMT11T308-FP4 11,63 0,8 0,08–0,20 0,1–1,5 ab
DCMT070202-PF4 7,75 0,2 0,04–0,12 0,1–1,0 a
DCMT070204-PF4 7,75 0,4 0,05–0,16 0,1–1,5 a
DCMT11T302-PF4 11,63 0,2 0,04–0,12 0,1–1,0 a
DCMT11T304-PF4 11,63 0,4 0,05–0,16 0,1–1,5 a
DCMT11T308-PF4 11,63 0,8 0,08–0,20 0,1–1,5 a
DCMT070204-PS5 7,75 0,4 0,06–0,18 0,3–2,0 bc bc
DCMT070208-PS5 7,75 0,8 0,08–0,25 0,5–2,0 c c
DCMT11T304-PS5 11,63 0,4 0,08–0,20 0,3–2,0 bc bc
DCMT11T308-PS5 11,63 0,8 0,10–0,25 0,5–2,0 bc bc
DCMT070204-FP6 7,75 0,4 0,06–0,18 0,3–2,0 ab
DCMT11T304-FP6 11,63 0,4 0,08–0,20 0,3–2,0 ab
DCMT11T308-FP6 11,63 0,8 0,10–0,25 0,5–2,0 ab
DCMT070204-FK6 7,75 0,4 0,06–0,18 0,3–2,0 ab
DCMT11T304-FK6 11,63 0,4 0,08–0,20 0,3–2,0 ab
DCMT11T308-FK6 11,63 0,8 0,10–0,25 0,5–2,0 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
7˚
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
DCMT11T304-PM 11,63 0,4 0,12–0,40 0,5–4,0 ab b ab b
DCMT11T308-PM 11,63 0,8 0,15–0,50 0,5–4,0 ab b ab b
DCGT070201-PM2 7,75 0,1 0,02–0,06 0,5–1,5 aa

DCGT070202-PM2 7,75 0,2 0,05–0,12 0,5–2,0 aa
DCGT070204-PM2 7,75 0,4 0,08–0,25 0,6–2,5 aa
DCGT11T301-PM2 11,63 0,1 0,02–0,06 0,5–1,5 aa
DCGT11T302-PM2 11,63 0,2 0,05–0,12 0,5–2,0 aa
DCGT11T304-PM2 11,63 0,4 0,08–0,25 0,6–3,0 aa
DCGT11T308-PM2 11,63 0,8 0,10–0,30 0,8–3,5 aa
DCMT070204-MM4 7,75 0,4 0,08–0,20 0,4–2,0 bbab ab
DCMT070208-MM4 7,75 0,8 0,12–0,25 0,5–2,0 bbab ab
DCMT11T304-MM4 11,63 0,4 0,08–0,25 0,4–3,0 bbab ab
DCMT11T308-MM4 11,63 0,8 0,12–0,32 0,5–3,0 bbab ab
DCMT11T312-MM4 11,63 1,2 0,15–0,35 0,5–3,0 b b
DCGT070204-MM4 7,75 0,4 0,08–0,20 0,4–2,0 b b
DCGT11T304-MM4 11,63 0,4 0,08–0,25 0,4–3,0 b b
DCGT11T308-MM4 11,63 0,8 0,12–0,32 0,5–3,0 b b
DCMT070204-MP4 7,75 0,4 0,08–0,20 0,4–2,0 ab
DCMT070208-MP4 7,75 0,8 0,12–0,25 0,5–2,0 ab
DCMT11T304-MP4 11,63 0,4 0,08–0,25 0,4–3,0 ab
DCMT11T308-MP4 11,63 0,8 0,12–0,32 0,5–3,0 ab
DCMT11T312-MP4 11,63 1,2 0,15–0,35 0,5–3,0 ab
DCGT070204-MP4 7,75 0,4 0,08–0,20 0,4–2,0 ab
DCGT11T304-MP4 11,63 0,4 0,08–0,25 0,4–3,0 ab
DCGT11T308-MP4 11,63 0,8 0,12–0,32 0,5–3,0 ab
DCMT070204-MK4 7,75 0,4 0,08–0,20 0,4–2,0 ab
DCMT070208-MK4 7,75 0,8 0,12–0,25 0,5–2,0 b
DCMT11T304-MK4 11,63 0,4 0,08–0,25 0,4–3,0 ab
DCMT11T308-MK4 11,63 0,8 0,12–0,32 0,5–3,0 ab
DCMT11T312-MK4 11,63 1,2 0,15–0,35 0,5–3,0 ab
DCMT070204-RM4 7,75 0,4 0,12–0,20 0,4–2,0 bbabc abc
DCMT070208-RM4 7,75 0,8 0,16–0,30 0,6–2,0 abc abc
DCMT11T304-RM4 11,63 0,4 0,12–0,25 0,4–3,0 bbabc abc
DCMT11T308-RM4 11,63 0,8 0,16–0,35 0,6–4,0 bbabc abc
DCMT11T312-RM4 11,63 1,2 0,20–0,40 0,8–4,0 bc bc
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
7˚
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
DCMT070204-RP4 7,75 0,4 0,12–0,20 0,4–2,0 abc
DCMT070208-RP4 7,75 0,8 0,16–0,30 0,6–2,0 abc
DCMT11T304-RP4 11,63 0,4 0,12–0,25 0,4–3,0 abc
DCMT11T308-RP4 11,63 0,8 0,16–0,35 0,6–4,0 abc
DCMT11T312-RP4 11,63 1,2 0,20–0,40 0,8–4,0 abc
DCMT070204-RK4 7,75 0,4 0,12–0,20 0,4–2,0 ab
DCMT070208-RK4 7,75 0,8 0,16–0,30 0,6–2,0 ab
DCMT11T304-RK4 11,63 0,4 0,12–0,25 0,4–3,0 ab
DCMT11T308-RK4 11,63 0,8 0,16–0,35 0,6–4,0 ab
DCMT11T312-RK4 11,63 1,2 0,20–0,40 0,8–4,0 ab
DCMW11T304-RK6 11,63 0,4 0,12–0,25 0,4–3,0 ab
DCMW11T308-RK6 11,63 0,8 0,16–0,35 0,5–4,0 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
DPMT / DPGT d
11˚
Indexable inserts
P M K S
HC HC HC HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
l r f ap
DPMT070204-MM4 7,75 0,4 0,08–0,20 0,4–2,0 b b
DPMT11T304-MM4 11,63 0,4 0,08–0,25 0,4–3,0 b b
DPMT11T308-MM4 11,63 0,8 0,12–0,32 0,5–3,0 b b
DPGT070204-MM4 7,75 0,4 0,08–0,20 0,4–2,0 b b
DPGT11T304-MM4 11,63 0,4 0,08–0,25 0,4–3,0 b b
DPGT11T308-MM4 11,63 0,8 0,12–0,32 0,5–3,0 b b
DPMT070204-MP4 7,75 0,4 0,08–0,20 0,4–2,0 b
DPMT11T304-MP4 11,63 0,4 0,08–0,25 0,4–3,0 b
DPMT11T308-MP4 11,63 0,8 0,12–0,32 0,5–3,0 b
DPGT070204-MP4 7,75 0,4 0,08–0,20 0,4–2,0 ab
DPGT11T304-MP4 11,63 0,4 0,08–0,25 0,4–3,0 ab
DPGT11T308-MP4 11,63 0,8 0,12–0,32 0,5–3,0 ab
DPMT070204-MK4 7,75 0,4 0,08–0,20 0,4–2,0 b
DPMT11T304-MK4 11,63 0,4 0,08–0,25 0,4–3,0 b
DPMT11T308-MK4 11,63 0,8 0,12–0,32 0,5–3,0 b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
Positive round
d
RCMT / RCGT / RCMX
7˚
® s
Tiger·tec Silver
Indexable inserts
P M K N S
HC HC HC HC HW HC HW
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM30
WSM30
WXN10
WS10
WK1
d f ap
RCMT0602M0-FM4 6 0,07–0,30 0,6–2,5 ab ab
RCMT0803M0-FM4 8 0,08–0,30 0,8–3,0 abc abc
RCMT10T3M0-FM4 10 0,10–0,35 1,0–4,0 abc abc
RCMT1204M0-FM4 12 0,12–0,40 1,2–5,0 abc abc
RCMT0602M0-FP4 6 0,07–0,30 0,6–2,5 ab
RCMT0803M0-FP4 8 0,08–0,30 0,8–3,0 b
RCMT10T3M0-FP4 10 0,10–0,35 1,0–4,0 b
RCMT1204M0-FP4 12 0,12–0,40 1,2–5,0 ab
RCGT0502M0-PF5 5 0,07–0,25 0,6–2,5 b
RCGT0602M0-PF5 6 0,07–0,25 0,6–2,5 c cb
RCGT0803M0-PF5 8 0,08–0,30 0,8–3,0 c cb
RCGT10T3M0-PF5 10 0,10–0,35 1,0–4,0 c cb
RCGT1204M0-PF5 12 0,12–0,40 1,2–5,0 b
RCGT0602M0-PM2 6 0,10–0,55 0,6–2,5 aa
RCGT060300-PM2 6,35 0,10–0,55 0,6–2,5 a
RCGT0803M0-PM2 8 0,12–0,60 0,7–3,0 aa
RCGT09T300-PM2 9,525 0,12–0,60 0,7–3,0 a
RCGT10T3M0-PM2 10 0,15–0,70 0,8–4,0 aa
RCGT1204M0-PM2 12 0,18–0,80 1,0–5,0 aa
RCGT120400-PM2 12,7 0,18–0,80 1,0–5,0 a
RCMT0602M0-RM4 6 0,08–0,50 0,6–2,5 bc bc
RCMT060300-RM4 6,35 0,08–0,50 0,6–2,5 b b
RCMT0803M0-RM4 8 0,10–0,60 0,8–3,0 bb bc bc
RCMT09T300-RM4 9,525 0,10–0,60 0,8–3,0 b b
RCMT10T3M0-RM4 10 0,12–0,80 1,0–4,0 bb bc bc
RCMT1204M0-RM4 12 0,12–1,00 1,2–5,0 bb bc bc
RCMT120400-RM4 12,7 0,12–1,00 1,2–5,0 b b
RCMT1606M0-RM4 16 0,15–1,20 1,6–7,0 bc bc
RCMT0602M0-RP4 6 0,08–0,50 0,6–2,5 abc
RCMT060300-RP4 6,35 0,08–0,50 0,6–2,5 bc
RCMT0803M0-RP4 8 0,10–0,60 0,8–3,0 abc
RCMT09T300-RP4 9,525 0,10–0,60 0,8–3,0 bc
RCMT10T3M0-RP4 10 0,12–0,80 1,0–4,0 abc
RCMT1204M0-RP4 12 0,12–1,00 1,2–5,0 abc
RCMT120400-RP4 12,7 0,12–1,00 1,2–5,0 bc
RCMT1605M0-RP4 16 0,15–1,20 1,6–7,0 abc
RCMT1606M0-RP4 16 0,15–1,20 1,6–7,0 abc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
Positive round
d
RCMT / RCGT / RCMX
7˚
® s
Tiger·tec Silver
Indexable inserts
P M K N S
HC HC HC HC HW HC HW
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM30
WSM30
WXN10
WS10
WK1
d f ap
RCMT0602M0-RK4 6 0,08–0,50 0,6–2,5 b
RCMT0803M0-RK4 8 0,10–0,60 0,8–3,0 b
RCMT10T3M0-RK4 10 0,12–0,80 1,0–4,0 ab
RCMT1204M0-RK4 12 0,12–1,00 1,2–5,0 ab
RCMT1605M0-RK4 16 0,15–1,20 1,6–7,0 b
RCMT1606M0-RK4 16 0,15–1,20 1,6–7,0 ab
RCMT10T3M0-HU6 10 0,12–0,80 1,0–4,0 abc
RCMT1204M0-HU6 12 0,12–1,20 1,2–5,0 abc
RCMT1606M0-HU6 16 0,15–1,20 1,6–7,0 abc b
RCMX2006M0-HU6 20 0,25–1,40 2,0–9,0 abc b

RCMX2507M0-HU6 25 0,30–1,60 2,5–11,0 abc b
RCMX3209M0-HU6 32 0,30–1,70 3,2–15,0 abc b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive square
SCGT / SCMT / SCMW d
Tiger·tec® Silver l
7˚
s
90˚
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WXN10
WK1
l r f ap
SCGT09T304-PF2 9,53 0,4 0,08–0,25 0,2–2,5 b a b
SCGT09T308-PF2 9,53 0,8 0,10–0,30 0,3–3,0 b a b
SCGT120408-PF2 12,7 0,8 0,10–0,30 0,3–3,5 b a b
SCMT09T304-FM4 9,53 0,4 0,05–0,15 0,1–1,5 bb bc bc

SCMT09T308-FM4 9,53 0,8 0,05–0,18 0,1–1,8 bb bc bc
SCMT120408-FM4 12,7 0,8 0,05–0,18 0,1–1,8 bc bc
SCMT09T304-FP4 9,53 0,4 0,05–0,15 0,1–1,5 ab

SCMT09T308-FP4 9,53 0,8 0,05–0,18 0,1–1,8 ab
SCMT120404-FP4 12,7 0,4 0,05–0,15 0,1–1,5 ab
SCMT120408-FP4 12,7 0,8 0,05–0,18 0,1–1,8 ab
SCMT120412-FP4 12,7 1,2 0,12–0,32 0,3–1,8 ab
SCMT09T304-PS5 9,53 0,4 0,08–0,20 0,3–2,0 bc bc
SCMT09T308-PS5 9,53 0,8 0,10–0,25 0,5–2,0 bc bc
SCMT120408-PS5 12,7 0,8 0,12–0,32 0,5–2,5 bc bc
SCMT09T304-FP6 9,53 0,4 0,08–0,20 0,3–2,0 b

SCMT09T308-FP6 9,53 0,8 0,10–0,25 0,5–2,0 b
SCMT120408-FP6 12,7 0,8 0,12–0,32 0,5–2,5 b
SCMT09T304-FK6 9,53 0,4 0,08–0,20 0,3–2,0 ab

SCMT09T308-FK6 9,53 0,8 0,10–0,25 0,5–2,0 ab
SCMT120408-FK6 12,7 0,8 0,12–0,32 0,5–2,5 ab
SCGT09T304-PM2 9,53 0,4 0,08–0,25 0,6–4,0 aa

SCGT09T308-PM2 9,53 0,8 0,10–0,35 0,7–4,0 aa
SCGT120408-PM2 12,7 0,8 0,10–0,40 0,8–6,0 aa
SCMT09T304-MM4 9,53 0,4 0,08–0,25 0,4–3,0 bbab ab

SCMT09T308-MM4 9,53 0,8 0,12–0,32 0,5–3,0 bbab ab
SCMT120408-MM4 12,7 0,8 0,12–0,32 0,5–3,5 b b
SCGT09T304-MM4 9,53 0,4 0,08–0,25 0,4–3,0 b b

SCGT09T308-MM4 9,53 0,8 0,12–0,32 0,5–3,0 b b
SCGT120408-MM4 12,7 0,8 0,12–0,32 0,5–3,5 b b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive square
SCGT / SCMT / SCMW d
7˚
s
90˚
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WXN10
WK1
l r f ap
SCMT09T304-MP4 9,53 0,4 0,08–0,25 0,4–3,0 ab
SCMT09T308-MP4 9,53 0,8 0,12–0,32 0,5–3,0 ab
SCMT120408-MP4 12,7 0,8 0,12–0,32 0,5–3,5 ab
SCGT09T304-MP4 9,53 0,4 0,08–0,25 0,4–3,0 ab

SCGT09T308-MP4 9,53 0,8 0,12–0,32 0,5–3,0 ab
SCGT120408-MP4 12,7 0,8 0,12–0,32 0,5–3,5 ab
SCMT09T304-MK4 9,53 0,4 0,08–0,25 0,4–3,0 ab

SCMT09T308-MK4 9,53 0,8 0,12–0,32 0,5–3,0 ab
SCMT120408-MK4 12,7 0,8 0,12–0,32 0,5–3,5 ab
SCGT09T304-MK4 9,53 0,4 0,08–0,25 0,4–3,0 b

SCGT09T308-MK4 9,53 0,8 0,12–0,32 0,5–3,0 b
SCGT120408-MK4 12,7 0,8 0,12–0,32 0,5–3,5 b
SCMT09T304-RM4 9,53 0,4 0,12–0,25 0,4–3,0 bb bc bc

SCMT09T308-RM4 9,53 0,8 0,16–0,35 0,6–4,0 bbabc abc
SCMT120404-RM4 12,7 0,4 0,12–0,25 0,4–3,0 bc bc
SCMT120408-RM4 12,7 0,8 0,16–0,40 0,6–5,0 bbabc abc
SCMT120412-RM4 12,7 1,2 0,20–0,50 0,8–5,0 bb bc bc
SCMT09T304-RP4 9,53 0,4 0,12–0,25 0,4–3,0 abc
SCMT09T308-RP4 9,53 0,8 0,16–0,35 0,6–4,0 abc
SCMT09T312-RP4 9,53 1,2 0,20–0,45 0,8–5,0 a
SCMT120404-RP4 12,7 0,4 0,12–0,25 0,4–3,0 abc
SCMT120408-RP4 12,7 0,8 0,16–0,40 0,6–5,0 abc
SCMT120412-RP4 12,7 1,2 0,20–0,50 0,8–5,0 abc
SCMT09T304-RK4 9,53 0,4 0,12–0,25 0,4–3,0 ab
SCMT09T308-RK4 9,53 0,8 0,16–0,35 0,6–4,0 ab
SCMT120404-RK4 12,7 0,4 0,12–0,25 0,4–3,0 ab
SCMT120408-RK4 12,7 0,8 0,16–0,40 0,6–5,0 ab
SCMT120412-RK4 12,7 1,2 0,20–0,50 0,8–5,0 ab
SCMW09T304-RK6 9,53 0,4 0,12–0,25 0,4–3,0 ab
SCMW09T308-RK6 9,53 0,8 0,16–0,35 0,6–4,0 ab
SCMW120404-RK6 12,7 0,4 0,12–0,25 0,4–4,0 b
SCMW120408-RK6 12,7 0,8 0,16–0,40 0,6–5,0 b
SCMW120412-RK6 12,7 1,2 0,20–0,50 0,8–5,0 b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive square
SPMT / SPGT d
11˚
s
90˚
Indexable inserts
P M K S
HC HC HC HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
l r f ap
SPMT09T304-MM4 9,53 0,4 0,08–0,25 0,4–3,0 b b
SPMT09T308-MM4 9,53 0,8 0,12–0,32 0,5–3,0 b b
SPGT09T304-MM4 9,53 0,4 0,08–0,25 0,4–3,0 b b

SPGT09T308-MM4 9,53 0,8 0,12–0,32 0,5–3,0 b b
SPMT09T304-MP4 9,53 0,4 0,08–0,25 0,4–3,0 b

SPMT09T308-MP4 9,53 0,8 0,12–0,32 0,5–3,0 b
SPGT09T304-MP4 9,53 0,4 0,08–0,25 0,4–3,0 ab

SPGT09T308-MP4 9,53 0,8 0,12–0,32 0,5–3,0 ab
SPMT09T304-MK4 9,53 0,4 0,08–0,25 0,4–3,0 b

SPMT09T308-MK4 9,53 0,8 0,12–0,32 0,5–3,0 b
SPGT09T304-MK4 9,53 0,4 0,08–0,25 0,4–3,0 b

SPGT09T308-MK4 9,53 0,8 0,12–0,32 0,5–3,0 b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
60˚
Positive triangular 60° r
TCGT / TCMT / TCMW d
l s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM21
WXN10
WPP01
WK1
l r f ap
TCGT06T101-PF2 6,62 0,1 0,02–0,06 0,1–1,5 c a
TCGT06T102-PF2 6,62 0,2 0,05–0,12 0,2–2,0 c a
TCGT06T104-PF2 6,62 0,4 0,08–0,25 0,2–2,5 c aa
TCGT090201-PF2 9,37 0,1 0,02–0,06 0,1–1,5 a
TCGT090202-PF2 9,37 0,2 0,05–0,12 0,2–2,0 b a b
TCGT090204-PF2 9,37 0,4 0,08–0,25 0,2–2,5 b aa b
TCGT110201-PF2 10,74 0,1 0,02–0,06 0,1–1,5 a
TCGT110202-PF2 10,74 0,2 0,05–0,12 0,2–2,0 b a b
TCGT110204-PF2 10,74 0,4 0,08–0,25 0,2–2,5 b aa b
TCGT16T301-PF2 16,50 0,1 0,02–0,06 0,1–1,5 a
TCGT16T302-PF2 16,50 0,2 0,05–0,12 0,2–2,0 b a b
TCGT16T304-PF2 16,50 0,4 0,08–0,25 0,2–2,5 b aa b
TCGT16T308-PF2 16,50 0,8 0,10–0,30 0,3–3,0 b aa b
TCMT06T102-FM4 6,62 0,2 0,02–0,10 0,1–1,0 c
TCMT06T104-FM4 6,62 0,4 0,04–0,17 0,1–1,0 c
TCMT090202-FM4 9,37 0,2 0,04–0,12 0,1–1,0 abc abc
TCMT090204-FM4 9,37 0,4 0,05–0,16 0,1–1,5 abc abc
TCMT090208-FM4 9,37 0,8 0,08–0,20 0,1–1,5 ab ab
TCMT110202-FM4 10,74 0,2 0,04–0,12 0,1–1,0 abc abc
TCMT110204-FM4 10,74 0,4 0,05–0,16 0,1–1,5 bbabc abc
TCMT110208-FM4 10,74 0,8 0,08–0,20 0,1–1,5 abc abc
TCMT16T302-FM4 16,50 0,2 0,04–0,12 0,1–1,0 ab ab
TCMT16T304-FM4 16,50 0,4 0,05–0,16 0,1–1,5 bbabc abc
TCMT16T308-FM4 16,50 0,8 0,08–0,20 0,1–1,5 bbabc abc
TCMT06T102-FP4 6,62 0,2 0,02–0,10 0,1–1,0 b
TCMT06T104-FP4 6,62 0,4 0,04–0,17 0,1–1,0 b
TCMT090202-FP4 9,37 0,2 0,04–0,12 0,1–1,0 b
TCMT090204-FP4 9,37 0,4 0,05–0,16 0,1–1,5 ab
TCMT090208-FP4 9,37 0,8 0,08–0,20 0,1–1,5 b
TCMT110202-FP4 10,74 0,2 0,04–0,12 0,1–1,0 ab
TCMT110204-FP4 10,74 0,4 0,05–0,16 0,1–1,5 ab
TCMT110208-FP4 10,74 0,8 0,08–0,20 0,1–1,5 ab
TCMT16T302-FP4 16,50 0,2 0,04–0,12 0,1–1,0 b
TCMT16T304-FP4 16,50 0,4 0,05–0,16 0,1–1,5 ab
TCMT16T308-FP4 16,50 0,8 0,08–0,20 0,1–1,5 ab
TCMT16T304-PF4 16,50 0,4 0,05–0,16 0,1–1,5 a
TCMT16T308-PF4 16,50 0,8 0,08–0,20 0,1–1,5 a
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
60˚
l s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM21
WXN10
WPP01
WK1
l r f ap
TCMT110204-PS5 10,74 0,4 0,06–0,18 0,3–2,0 b c bc
TCMT110208-PS5 10,74 0,8 0,10–0,20 0,5–2,0 b c bc
TCMT16T304-PS5 16,50 0,4 0,08–0,20 0,3–2,0 b c bc
TCMT16T308-PS5 16,50 0,8 0,10–0,25 0,5–2,0 b c bc
TCMT110204-FP6 10,74 0,4 0,06–0,18 0,3–2,0 b
TCMT110208-FP6 10,74 0,8 0,10–0,20 0,5–2,0 b
TCMT16T304-FP6 16,50 0,4 0,08–0,20 0,3–2,0 b
TCMT16T308-FP6 16,50 0,8 0,10–0,25 0,5–2,0 b
TCMT110204-FK6 10,74 0,4 0,06–0,18 0,3–2,0 ab
TCMT110208-FK6 10,74 0,8 0,10–0,20 0,5–2,0 ab
TCMT16T304-FK6 16,50 0,4 0,08–0,20 0,3–2,0 ab
TCMT16T308-FK6 16,50 0,8 0,10–0,25 0,5–2,0 ab
TCGT110201-PM2 10,74 0,1 0,02–0,06 0,5–1,5 aa
TCGT110202-PM2 10,74 0,2 0,05–0,12 0,6–2,0 aa
TCGT110204-PM2 10,74 0,4 0,08–0,25 0,6–3,0 aa
TCGT16T302-PM2 16,50 0,2 0,05–0,12 0,5–2,0 aa
TCGT16T304-PM2 16,50 0,4 0,08–0,25 0,6–4,0 aa
TCGT16T308-PM2 16,50 0,8 0,10–0,35 0,8–4,0 aa
TCMT090204-MM4 9,37 0,4 0,08–0,20 0,4–2,0 ab ab
TCMT090208-MM4 9,37 0,8 0,12–0,25 0,5–2,0 ab ab
TCMT110204-MM4 10,74 0,4 0,08–0,20 0,4–2,0 ab ab
TCMT110208-MM4 10,74 0,8 0,12–0,30 0,5–2,0 ab ab
TCMT16T304-MM4 16,50 0,4 0,08–0,25 0,4–3,0 bbab ab
TCMT16T308-MM4 16,50 0,8 0,12–0,32 0,5–3,0 bbab ab
TCGT090204-MM4 9,37 0,4 0,08–0,20 0,4–2,0 b b
TCGT110204-MM4 10,74 0,4 0,08–0,20 0,4–2,0 b b
TCGT110208-MM4 10,74 0,8 0,12–0,30 0,5–2,0 b b
TCGT16T304-MM4 16,50 0,4 0,08–0,25 0,4–3,0 b b
TCGT16T308-MM4 16,50 0,8 0,12–0,32 0,5–3,0 b b
TCMT090204-MP4 9,37 0,4 0,08–0,20 0,4–2,0 ab
TCMT090208-MP4 9,37 0,8 0,12–0,25 0,5–2,0 ab
TCMT110204-MP4 10,74 0,4 0,08–0,20 0,4–2,0 ab
TCMT110208-MP4 10,74 0,8 0,12–0,30 0,5–2,0 ab
TCMT16T304-MP4 16,50 0,4 0,08–0,25 0,4–3,0 ab
TCMT16T308-MP4 16,50 0,8 0,12–0,32 0,5–3,0 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
60˚
l s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM21
WXN10
WPP01
WK1
l r f ap
TCGT090204-MP4 9,37 0,4 0,08–0,20 0,4–2,0 ab
TCGT110204-MP4 10,74 0,4 0,08–0,20 0,4–2,0 ab
TCGT110208-MP4 10,74 0,8 0,12–0,30 0,5–2,0 ab
TCGT16T304-MP4 16,50 0,4 0,08–0,25 0,4–3,0 ab
TCGT16T308-MP4 16,50 0,8 0,12–0,32 0,5–3,0 ab
TCMT090204-MK4 9,37 0,4 0,08–0,20 0,4–2,0 ab
TCMT090208-MK4 9,37 0,8 0,12–0,25 0,5–2,0 ab
TCMT110204-MK4 10,74 0,4 0,08–0,20 0,4–2,0 ab
TCMT110208-MK4 10,74 0,8 0,12–0,30 0,5–2,0 ab
TCMT16T304-MK4 16,50 0,4 0,08–0,25 0,4–3,0 ab
TCMT16T308-MK4 16,50 0,8 0,12–0,32 0,5–3,0 ab
TCGT090204-MK4 9,37 0,4 0,08–0,20 0,4–2,0 b
TCGT110204-MK4 10,74 0,4 0,08–0,20 0,4–2,0 b
TCGT110208-MK4 10,74 0,8 0,12–0,30 0,5–2,0 b
TCGT16T304-MK4 16,50 0,4 0,08–0,25 0,4–3,0 b
TCGT16T308-MK4 16,50 0,8 0,12–0,32 0,5–3,0 b
TCMT090204-RM4 9,37 0,4 0,12–0,25 0,4–3,0 bc bc
TCMT090208-RM4 9,37 0,8 0,16–0,30 0,6–3,0 bc bc
TCMT110204-RM4 10,74 0,4 0,12–0,25 0,4–3,0 bbabc abc
TCMT110208-RM4 10,74 0,8 0,16–0,30 0,6–3,0 bb bc bc
TCMT16T304-RM4 16,50 0,4 0,12–0,25 0,4–3,0 bbabc abc
TCMT16T308-RM4 16,50 0,8 0,16–0,35 0,6–4,0 bbabc abc
TCMT16T312-RM4 16,50 1,2 0,20–0,40 0,8–4,0 bb bc bc
TCMT090204-RP4 9,37 0,4 0,12–0,25 0,4–3,0 abc
TCMT090208-RP4 9,37 0,8 0,16–0,30 0,6–3,0 abc
TCMT110204-RP4 10,74 0,4 0,12–0,25 0,4–3,0 abc
TCMT110208-RP4 10,74 0,8 0,16–0,30 0,6–3,0 abc
TCMT16T304-RP4 16,50 0,4 0,12–0,25 0,4–3,0 abc
TCMT16T308-RP4 16,50 0,8 0,16–0,35 0,6–4,0 abc
TCMT16T312-RP4 16,50 1,2 0,20–0,40 0,8–4,0 abc
TCMT090204-RK4 9,37 0,4 0,12–0,25 0,4–3,0 ab
TCMT090208-RK4 9,37 0,8 0,16–0,30 0,6–3,0 ab
TCMT110204-RK4 10,74 0,4 0,12–0,25 0,4–3,0 ab
TCMT110208-RK4 10,74 0,8 0,16–0,30 0,6–3,0 ab
TCMT16T304-RK4 16,50 0,4 0,12–0,25 0,4–3,0 ab
TCMT16T308-RK4 16,50 0,8 0,16–0,35 0,6–4,0 ab
TCMT16T312-RK4 16,50 1,2 0,20–0,40 0,8–4,0 ab
TCMW110202-RK6 10,74 0,2 0,08–0,12 0,2–3,0 ab
TCMW110204-RK6 10,74 0,4 0,12–0,25 0,4–3,0 ab
TCMW110208-RK6 10,74 0,8 0,16–0,30 0,6–3,0 ab
TCMW16T304-RK6 16,50 0,4 0,12–0,25 0,4–3,0 ab
TCMW16T308-RK6 16,50 0,8 0,16–0,35 0,6–4,0 ab
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
60˚
TPMT / TPGT d

l s
Indexable inserts
P M K S
HC HC HC HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
l r f ap
TPMT090204-MM4 9,90 0,4 0,08–0,20 0,4–2,0 b b
TPMT110204-MM4 11,00 0,4 0,08–0,20 0,4–2,0 b b
TPMT110208-MM4 11,00 0,8 0,12–0,30 0,5–2,0 b b
TPMT16T304-MM4 16,50 0,4 0,08–0,25 0,4–3,0 b b
TPMT16T308-MM4 16,50 0,8 0,12–0,32 0,5–3,0 b b
TPGT110204-MM4 11,00 0,4 0,08–0,20 0,4–2,0 b b
TPGT110208-MM4 11,00 0,8 0,12–0,30 0,5–2,0 b b
TPGT16T304-MM4 16,50 0,4 0,08–0,25 0,4–3,0 b b
TPGT16T308-MM4 16,50 0,8 0,12–0,32 0,5–3,0 b b
TPMT090204-MP4 9,90 0,4 0,08–0,20 0,4–2,0 b
TPMT110204-MP4 11,00 0,4 0,08–0,20 0,4–2,0 b
TPMT110208-MP4 11,00 0,8 0,12–0,30 0,5–2,0 b
TPMT16T304-MP4 16,50 0,4 0,08–0,25 0,4–3,0 b
TPMT16T308-MP4 16,50 0,8 0,12–0,32 0,5–3,0 b
TPGT090204-MP4 9,90 0,4 0,08–0,20 0,4–2,0 ab
TPGT110204-MP4 11,00 0,4 0,08–0,20 0,4–2,0 ab
TPGT110208-MP4 11,00 0,8 0,12–0,30 0,5–2,0 ab
TPGT16T304-MP4 16,50 0,4 0,08–0,25 0,4–3,0 ab
TPGT16T308-MP4 16,50 0,8 0,12–0,32 0,5–3,0 ab
TPMT090204-MK4 9,90 0,4 0,08–0,20 0,4–2,0 b
TPMT110204-MK4 11,00 0,4 0,08–0,20 0,4–2,0 b
TPMT110208-MK4 11,00 0,8 0,12–0,30 0,5–2,0 b
TPMT16T304-MK4 16,50 0,4 0,08–0,25 0,4–3,0 b
TPMT16T308-MK4 16,50 0,8 0,12–0,32 0,5–3,0 b
TPGT090204-MK4 9,90 0,4 0,08–0,20 0,4–2,0 b
TPGT110204-MK4 11,00 0,4 0,08–0,20 0,4–2,0 b
TPGT110208-MK4 11,00 0,8 0,12–0,30 0,5–2,0 b
TPGT16T304-MK4 16,50 0,4 0,08–0,25 0,4–3,0 b
TPGT16T308-MK4 16,50 0,8 0,12–0,32 0,5–3,0 b
TPMR110308 11,00 0,8 0,16–0,30 0,6–3,0 b
TPMR160304 16,50 0,4 0,12–0,25 0,4–3,0 b
TPMR160308 16,50 0,8 0,16–0,30 0,6–4,0 b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
VCGT / VCMT / VBGT / VBMT / VCMW d
5˚ 7˚
l s s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
VCGT110301-PF2 11,07 0,1 0,02–0,06 0,1–1,5 b a b
VCGT110302-PF2 11,07 0,2 0,05–0,12 0,2–2,0 b aa b
VCGT110304-PF2 11,07 0,4 0,08–0,25 0,2–2,5 ab aa ab
VCGT160402-PF2 16,61 0,2 0,05–0,12 0,2–2,0 b aa b
VCGT160404-PF2 16,61 0,4 0,08–0,25 0,2–2,5 ab aa ab
VCGT160408-PF2 16,61 0,8 0,10–0,30 0,3–3,0 ab aa ab
VCMT110302-FM4 11,07 0,2 0,04–0,12 0,1–1,0 bbabc abc
VCMT110304-FM4 11,07 0,4 0,05–0,16 0,1–1,5 bbabc abc
VCMT160402-FM4 16,61 0,2 0,04–0,12 0,1–1,0 bbabc abc
VCMT160404-FM4 16,61 0,4 0,05–0,16 0,1–1,5 bbabc abc
VCMT160408-FM4 16,61 0,8 0,08–0,20 0,1–1,5 bbabc abc
VCMT110302-FP4 11,07 0,2 0,04–0,12 0,1–1,0 ab
VCMT110304-FP4 11,07 0,4 0,05–0,16 0,1–1,5 ab
VCMT160402-FP4 16,61 0,2 0,04–0,12 0,1–1,0 ab
VCMT160404-FP4 16,61 0,4 0,05–0,16 0,1–1,5 ab
VCMT160408-FP4 16,61 0,8 0,08–0,20 0,1–1,5 ab
VCMT110302-PF4 11,07 0,2 0,04–0,12 0,1–1,0 a
VCMT110304-PF4 11,07 0,4 0,05–0,16 0,1–1,5 a
VCMT160402-PF4 16,61 0,2 0,04–0,12 0,1–1,0 a
VCMT160404-PF4 16,61 0,4 0,05–0,16 0,1–1,5 a
VCMT160408-PF4 16,61 0,8 0,08–0,20 0,1–1,5 a
VBGT110302-PF5 11,07 0,2 0,04–0,10 0,1–0,6 c c
VBGT110304-PF5 11,07 0,4 0,06–0,12 0,2–0,6 c c
VBMT110304-PS5 11,07 0,4 0,06–0,18 0,3–2,0 abc abc
VBMT110308-PS5 11,07 0,8 0,10–0,20 0,5–2,0 abc abc
VBMT160404-PS5 16,61 0,4 0,08–0,20 0,3–2,0 abc abc
VBMT160408-PS5 16,61 0,8 0,10–0,25 0,5–2,0 abc abc
VBMT160412-PS5 16,61 1,2 0,12–0,30 0,6–2,0 abc abc
VBMT110304-FP6 11,07 0,4 0,06–0,18 0,3–2,0 ab
VBMT110308-FP6 11,07 0,8 0,10–0,20 0,5–2,0 ab
VBMT160404-FP6 16,61 0,4 0,08–0,20 0,3–2,0 ab
VBMT160406-FP6 16,61 0,6 0,10–0,25 0,4–2,0 ab
VBMT160408-FP6 16,61 0,8 0,10–0,25 0,5–2,0 ab
VBMT160412-FP6 16,61 1,2 0,12–0,30 0,6–2,0 ab
VBMT110304-FK6 11,07 0,4 0,06–0,18 0,3–2,0 ab
VBMT110308-FK6 11,07 0,8 0,10–0,20 0,5–2,0 ab
VBMT160404-FK6 16,61 0,4 0,08–0,20 0,3–2,0 ab
VBMT160406-FK6 16,61 0,6 0,10–0,25 0,4–2,0 ab
VBMT160408-FK6 16,61 0,8 0,10–0,25 0,5–2,0 ab
VBMT160412-FK6 16,61 1,2 0,12–0,30 0,6–2,0 b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
5˚ 7˚
l s s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
VCGT110301-PM2 11,07 0,1 0,02–0,06 0,5–1,5 aa
VCGT110302-PM2 11,07 0,2 0,05–0,12 0,5–2,0 aa
VCGT110304-PM2 11,07 0,4 0,08–0,25 0,6–2,5 aa
VCGT110308-PM2 11,07 0,8 0,10–0,35 0,8–3,0 aa
VCGT130301-PM2 13,1 0,1 0,02–0,06 0,5–1,5 aa
VCGT130302-PM2 13,1 0,2 0,05–0,12 0,5–2,0 aa
VCGT130304-PM2 13,1 0,4 0,08–0,25 0,6–3,0 aa
VCGT160404-PM2 16,61 0,4 0,08–0,25 0,6–3,5 aa
VCGT160408-PM2 16,61 0,8 0,10–0,35 0,8–3,5 aa
VCGT160412-PM2 16,61 1,2 0,10–0,45 1,0–3,5 aa
VBMT110304-MM4 11,07 0,4 0,08–0,20 0,4–1,5 bb b b
VBMT110308-MM4 11,07 0,8 0,12–0,25 0,5–1,5 b b
VBMT160404-MM4 16,61 0,4 0,08–0,20 0,4–2,0 bbab ab
VBMT160408-MM4 16,61 0,8 0,12–0,30 0,5–2,0 bbab ab
VBMT160412-MM4 16,61 1,2 0,12–0,32 0,5–2,0 ab ab
VBMT110304-MP4 11,07 0,4 0,08–0,20 0,4–1,5 ab
VBMT110308-MP4 11,07 0,8 0,12–0,25 0,5–1,5 ab
VBMT160404-MP4 16,61 0,4 0,08–0,20 0,4–2,0 ab
VBMT160406-MP4 16,61 0,6 0,12–0,25 0,5–2,0 ab
VBMT160408-MP4 16,61 0,8 0,12–0,30 0,5–2,0 ab
VBMT160412-MP4 16,61 1,2 0,12–0,32 0,5–2,0 ab
VBMT110304-MK4 11,07 0,4 0,08–0,20 0,4–1,5 ab
VBMT110308-MK4 11,07 0,8 0,12–0,25 0,5–1,5 ab
VBMT160404-MK4 16,61 0,4 0,08–0,20 0,4–2,0 ab
VBMT160408-MK4 16,61 0,8 0,12–0,30 0,5–2,0 ab
VBMT160412-MK4 16,61 1,2 0,12–0,32 0,5–2,0 b
VCMT110304-RM4 11,07 0,4 0,12–0,20 0,4–2,5 bbabc abc
VCMT110308-RM4 11,07 0,8 0,16–0,25 0,6–3,0 bc bc
VCMT160404-RM4 16,61 0,4 0,12–0,25 0,4–2,5 bbabc abc
VCMT160408-RM4 16,61 0,8 0,16–0,30 0,6–3,0 bbabc abc
VCMT160412-RM4 16,61 1,2 0,20–0,35 0,8–4,0 bc bc
VCMT110304-RP4 11,07 0,4 0,12–0,20 0,4–2,5 abc
VCMT110308-RP4 11,07 0,8 0,16–0,25 0,6–3,0 abc
VCMT160404-RP4 16,61 0,4 0,12–0,25 0,4–2,5 abc
VCMT160406-RP4 16,61 0,6 0,15–0,25 0,6–3,0 abc
VCMT160408-RP4 16,61 0,8 0,16–0,30 0,6–3,0 abc
VCMT160412-RP4 16,61 1,2 0,20–0,35 0,8–3,0 abc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
5˚ 7˚
l s s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WXN10
WPP01
WK1
l r f ap
VCMT110304-RK4 11,07 0,4 0,12–0,20 0,4–2,5 ab
VCMT110308-RK4 11,07 0,8 0,16–0,25 0,6–3,0 ab
VCMT160404-RK4 16,61 0,4 0,12–0,25 0,4–2,5 ab
VCMT160408-RK4 16,61 0,8 0,16–0,30 0,6–3,0 ab
VCMT160412-RK4 16,61 1,2 0,20–0,35 0,8–3,0 ab
VCMW160404-RK6 16,61 0,4 0,12–0,25 0,4–2,5 ab
VCMW160408-RK6 16,61 0,8 0,16–0,30 0,6–3,0 ab
VCMW160412-RK6 16,61 1,2 0,20–0,35 0,8–3,0 ab
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive Trigon 80°
WCMT / WCGT d
® 7˚
Tiger·tec Silver 80˚ l s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM21
WXN10
WK1
l r f ap
WCMT040204-PF 4,34 0,4 0,05–0,30 0,3–1,5 b b b
WCMT06T304-PF 6,52 0,4 0,07–0,30 0,3–2,0 a b b
WCMT06T308-PF 6,52 0,8 0,07–0,35 0,3–2,0 b b b
WCGT030202-PF2 3,91 0,2 0,05–0,12 0,2–2,0 c a

WCGT030204-PF2 3,91 0,4 0,08–0,25 0,2–2,5 c a
WCGT040202-PF2 4,34 0,2 0,05–0,12 0,2–2,0 c a
WCGT040204-PF2 4,34 0,4 0,08–0,25 0,2–2,5 c a
WCGT06T301-PF2 6,52 0,1 0,02–0,06 0,1–1,5 a
WCGT06T302-PF2 6,52 0,2 0,05–0,12 0,2–2,0 a
WCGT06T304-PF2 6,52 0,4 0,08–0,25 0,2–2,5 a
WCGT06T308-PF2 6,52 0,8 0,10–0,30 0,3–3,0 a
WCMT040202-FM4 4,34 0,2 0,04–0,12 0,1–1,0 bc bc
WCMT040204-FM4 4,34 0,4 0,05–0,16 0,1–1,5 bc bc
WCMT06T304-FM4 6,52 0,4 0,05–0,16 0,1–1,5 bc bc
WCMT06T308-FM4 6,52 0,8 0,08–0,20 0,1–1,5 bc bc
WCMT040202-FP4 4,34 0,2 0,04–0,12 0,1–1,0 ab
WCMT040204-FP4 4,34 0,4 0,05–0,16 0,1–1,5 ab
WCMT040208-FP4 4,34 0,8 0,08–0,20 0,1–1,5 ab
WCMT06T302-FP4 6,52 0,2 0,04–0,12 0,1–1,0 ab
WCMT06T304-FP4 6,52 0,4 0,05–0,16 0,1–1,5 ab
WCMT06T308-FP4 6,52 0,8 0,08–0,20 0,1–1,5 b
WCMT080404-FP4 8,69 0,4 0,05–0,16 0,1–1,5 b
WCMT080408-FP4 8,69 0,8 0,08–0,20 0,1–1,5 b
WCMT040204-FP6 4,34 0,4 0,06–0,18 0,3–2,0 b
WCMT040208-FP6 4,34 0,8 0,10–0,20 0,5–2,0 b
WCMT06T308-FP6 6,52 0,8 0,10–0,25 0,5–2,0 b
WCMT040204-FK6 4,34 0,4 0,06–0,18 0,3–2,0 b

WCMT06T308-FK6 6,52 0,8 0,10–0,25 0,5–2,0 b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1
r
Positive Trigon 80°
WCMT / WCGT d
® 7˚
Tiger·tec Silver 80˚ l s
Indexable inserts
P M K N S
HC HC HC HC HW HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM21
WXN10
WK1
l r f ap
WCGT030202-PM2 3,91 0,2 0,05–0,12 0,5–1,5 aa
WCGT030204-PM2 3,91 0,4 0,08–0,20 0,6–1,5 aa
WCGT040202-PM2 4,34 0,2 0,05–0,12 0,5–2,0 aa
WCGT040204-PM2 4,34 0,4 0,08–0,25 0,6–2,5 aa
WCGT06T302-PM2 6,52 0,2 0,05–0,12 0,6–2,0 aa
WCGT06T304-PM2 6,52 0,4 0,08–0,25 0,6–3,0 aa
WCGT080404-PM2 8,69 0,4 0,08–0,25 0,6–4,0 aa
WCGT080408-PM2 8,69 0,8 0,10–0,35 0,8–4,0 aa
WCMT06T304-MM4 6,52 0,4 0,08–0,25 0,4–2,5 b b
WCMT06T308-MM4 6,52 0,8 0,12–0,32 0,5–2,5 b b
WCMT06T304-MP4 6,52 0,4 0,08–0,25 0,4–2,5 b

WCMT06T308-MP4 6,52 0,8 0,12–0,32 0,5–2,5 b
WCMT06T304-MK4 6,52 0,4 0,08–0,25 0,4–2,5 b

WCMT06T308-MK4 6,52 0,8 0,12–0,32 0,5–2,5 b
WCMT030202-RM4 3,91 0,2 0,08–0,12 0,2–1,5 b b

WCMT040202-RM4 4,34 0,2 0,08–0,12 0,4–2,0 bc bc
WCMT040204-RM4 4,34 0,4 0,12–0,25 0,4–2,5 bc bc
WCMT06T304-RM4 6,52 0,4 0,12–0,25 0,4–3,0 bc bc
WCMT06T308-RM4 6,52 0,8 0,16–0,35 0,6–3,0 bc bc
WCMT080408-RM4 8,69 0,8 0,16–0,40 0,6–4,0 bc bc
WCMT080412-RM4 8,69 1,2 0,20–0,45 0,8–4,0 bc bc
WCMT030202-RP4 3,91 0,2 0,08–0,12 0,2–1,5 abc
WCMT040204-RP4 4,34 0,4 0,12–0,25 0,4–2,5 abc
WCMT06T304-RP4 6,52 0,4 0,12–0,25 0,4–3,0 abc
WCMT06T308-RP4 6,52 0,8 0,16–0,35 0,6–3,0 abc
WCMT080404-RP4 8,69 0,4 0,12–0,25 0,4–3,0 abc
WCMT080408-RP4 8,69 0,8 0,16–0,40 0,6–4,0 abc
WCMT080412-RP4 8,69 1,2 0,20–0,45 0,8–4,0 abc
WCMT030202-RK4 3,91 0,2 0,08–0,12 0,2–1,5 b
WCMT040204-RK4 4,34 0,4 0,12–0,25 0,4–2,5 b
WCMT06T304-RK4 6,52 0,4 0,12–0,25 0,4–3,0 ab
WCMT06T308-RK4 6,52 0,8 0,16–0,35 0,6–3,0 ab
WCMT080404-RK4 8,69 0,4 0,12–0,25 0,4–3,0 b
WCMT080408-RK4 8,69 0,8 0,16–0,40 0,6–4,0 b
WCMT080412-RK4 8,69 1,2 0,20–0,45 0,8–4,0 b
Ra/Rz
A 238 A 244 A 256 A 80 A 190
ISO turning
A1

ISO turning – CBN/PCD/ceramic
CBN indexable inserts Ceramic indexable inserts
Insert shape Description Page Insert shape Description Page

C Positive basic shape 7°/11° A 66
C Negative basic shape A 73

D Negative basic shape A 73

S Negative basic shape A 65 R Positive basic shape 7°/11° A 76
T Positive basic shape 7° A 67
S Negative basic shape A 74
V Positive basic shape 5° A 68 T Negative basic shape A 75
W Positive basic shape 7° A 68
PCD indexable inserts Cutting tool materials: CBN, PCD, ceramic
Cutting
tool 01 10 20 30 40
Insert shape Description Page Application material 05 15 25 35 45
CBN WCB80
C Positive basic shape 7° A 69
ISO K
Si3N4* WSN10

ISO N PCD WDN10
S Positive basic shape 7° A 71

SiAlON* WIS10
ISO S
Whisker*
T Positive basic shape 7° A 71 WWS20
CBN WCB30
V Positive basic shape 7° A 72 ISO H
CBN WCB50
ISO O PCD WDN10
Wear resistance
Toughness
* Ceramic
ISO turning
A1
Designation key for CBN/PCD/ceramic cutting tool materials – Turning
Example:
W D N 10
Walter 1 2 3
1 2 3
Cutting tool material Primary application ISO range of applications
Wear
D Diamond P Steel resistance Cutting tool materials for:
I SiAlON ceramic M Stainless steel 01 0 ISO turning
Whisker-reinforced K Cast iron 05

W 1 ISO turning
ceramic 10
N NF metals 5 ISO turning
20
Materials with difficult 2 Thread turning
21
23 3 Grooving
H Hard materials
30
CB* CBN
32
SN* Si3N4 ceramic 33
43
Toughness
* Old designation key
ISO turning
A1

Example: Ceramic indexable inserts
R N G N 12 07 00 T 010 20
1 2 3 4 5 6 7 8 11 12
1 2 3

A F
A 85°
M 86°
3° 25° d m s
m
T A ± 0,025 ± 0,005 ± 0,025
82°
B O B G
5° 30 ° d C ± 0,025 ± 0,013 ± 0,025
m
E ± 0,025 ± 0,025 ± 0,025
C 80° P
C N C F ± 0,013 ± 0,005 ± 0,025
7° 0° S
D R G ± 0,025 ± 0,025 ± 0,130
d
55°
D P H ± 0,013 ± 0,013 ± 0,025

15 ° 11°
90° D J1 ± 0,05–0,152 ± 0,005 ± 0,025
E 75° S V
d m 1
K ± 0,05–0,15 2
± 0,013 ± 0,025
E 20°
H T 60°
L1 ± 0,05–0,152 ± 0,025 ± 0,025
M ± 0,05–0,152 ± 0,08–0,202 ± 0,130

s
K 55° V 35°
N ± 0,05–0,15 2
± 0,08–0,20 2
± 0,025
U ± 0,08–0,252 ± 0,13–0,382 ± 0,130

L W 80° 1
Inserts with ground planar cutting edges
2
Depending on the insert size
(see ISO standard 1832)
6 7 8 9 10
Insert thickness s Corner radius r Cutting edge
Edge formation Cutting direction
[mm] [mm] preparation
01 s = 1,59 01 r = 0,1 S Sharp

s
02 r = 0,2
F
T1 s = 1,98
s
r R
02 s = 2,38 04 r = 0,4
E
s T2 s = 2,78 08 r = 0,8
03 s = 3,18 12 r = 1,2 L
s
T
T3 s = 3,97 16 r = 1,6
04 s = 4,76 24 r = 2,4
S
05 s = 5,56 R N
06 s = 6,35
M0 Metric version
07 s = 7,94 (diameter in [mm])
09 s = 9,52 00 Inch version
(diameter with inch
units in [mm])
ISO turning
A1
Example: PCD indexable insert
C C G W 09 T3 04 F S L – ... ... 9
1 2 3 4 5 6 7 8 9 10 13 14 15
4 5
Cutting edge length l
Machining and fastening features
[mm]
C D R S T V W
A N Inner circle
diameter
d l l d l l l l
B Q mm Inches Size l Size l Size Size l Size l Size l Size l

β = 40–60° 3,97 5/32 06 6,9
β = 70–90°
5 0,197 05 03 3,8
C R 5,56 7/32 09 9
β = 70–90° 6 0,236 06
β
6,35 2/8 06 6,4 07 7,7 061 11 11 11 11 04 4,3
F T 8 0,315 08 05 5,2
9,525 3/8 09 9,6 11 11,6 091 09 9,5 16 16,5 16 16,5 06 6,5
β = 40–60°
β 10 0,394 10
G U 12 0,472 12
β = 40–60° 12,7 4/8 12 12,9 15 15,5 121 12 12,7 22 22 08 8,7
β
15,875 5/8 16 16,1 15 15,8 27 27 10 10,8
H W 16 0,63 16
17,46 11/16 12 11,6
β = 70–90° β = 40–60°
β
19,05 6/8 19 19,3 191 19 19,0
J X Drawing or pre- 20 0,787 20

β = 70–90° cise description 25 0,984 25
of the indexable 25,4 8/8 25 25,8 251 25 25,4
insert is required
M 32 1,26 32
1
Inch version (00)
11 12 13 14 15
Number of cutting edges/
Chamfer width Chamfer angle Wiper cutting edge Chip breaking area
version
ap
W 1 single
010 = 0,10 mm 15 = 15° 2 double

020 = 0,20 mm 20 = 20°
R
025 = 0,25 mm 3 triple
070 = 0,70 mm M
150 = 1,50 mm 4 quadruple

F .
.
200 = 2,00 mm .
9 strip
f
0 full-face
M Medium machining
R Roughing operation solid
ISO turning
A1
r
CBN – Negative rhombic 80°
CNMA d
80˚ l s
Indexable inserts
K N S H O
cutting edges
BH CN DP CN CR BL BH DP
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
CNMA120408 1 2,3 0,8 0,05–0,25 0,1–0,5 ab
CNMA120404-2 2 2,4 0,4 0,05–0,20 0,1–0,3 ab

CNMA120408-2 2 2,3 0,8 0,05–0,25 0,1–0,5 ab
CNMA120412-2 2 2,2 1,2 0,05–0,30 0,1–0,5 ab
See the ISO 1832 designation key for dimensions BH = CBN with high CBN content
CN = Silicon nitride Si3N4
DP = Polycrystalline diamond
CR = Reinforced ceramic
BL = CBN with low CBN content
r
CBN – Negative rhombic 55°
DNMA d
55˚ l s
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
DNMA150604-2 2 2,5 0,4 0,05–0,20 0,1–0,3 ab
DNMA150608-2 2 2 0,8 0,05–0,25 0,1–0,5 ab
DNMA150612-2 2 2 1,2 0,05–0,30 0,1–0,5 ab
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
CBN – Negative square
SNMA d
90˚ l s
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
SNMA120412 1 2,2 1,2 0,05–0,30 0,1–0,5 b
60˚ r
CBN – Negative triangular 60°
TNMA d
l s
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
TNMA160404-3 3 2,2 0,4 0,05–0,20 0,1–0,3 ab
TNMA160408-3 3 2 0,8 0,05–0,25 0,1–0,5 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
CBN – Positive rhombic 80°
CCMW d
80˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
Designation mm mm α mm mm
CCMW060204 1 2,5 0,4 7° 0,05–0,20 0,1–0,3 ab
CCMW060208 1 2,4 0,8 7° 0,05–0,25 0,1–0,5 ab
CCMW09T308 1 2,3 0,8 7° 0,05–0,25 0,1–0,5 b
CCMW060204-2 2 2,5 0,4 7° 0,05–0,20 0,1–0,3 ab

CCMW060208-2 2 2,4 0,8 7° 0,05–0,25 0,1–0,5 ab
CCMW09T304-2 2 2,4 0,4 7° 0,05–0,20 0,1–0,3 ab
CCMW09T308-2 2 2,3 0,8 7° 0,05–0,25 0,1–0,5 ab
r
CPGW d
80˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
CPGW050202 1 2,4 0,2 11° 0,05–0,15 0,1–0,3 b
CPGW050204 1 2,4 0,4 11° 0,05–0,20 0,1–0,3 b
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
DCMW d
α
55˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
DCMW11T302 1 2,6 0,2 7° 0,05–0,15 0,1–0,3 ab
DCMW11T304 1 2,4 0,4 7° 0,05–0,20 0,1–0,3 ab
DCMW11T304-2 2 2,4 0,4 7° 0,05–0,20 0,1–0,3 ab

DCMW11T308-2 2 2,1 0,8 7° 0,05–0,25 0,1–0,5 ab
r
CBN – Positive triangular 60°
TCMW d
α
60˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
TCMW110204 1 2,4 0,4 7° 0,05–0,20 0,1–0,3 ab
TCMW110208 1 2,2 0,8 7° 0,05–0,25 0,1–0,5 ab
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
VBMW d
α
35˚
s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
VBMW160402 1 3,8 0,2 5° 0,05–0,15 0,1–0,3 ab
VBMW160404 1 3,3 0,4 5° 0,05–0,20 0,1–0,3 ab
VBMW160408 1 2,5 0,8 5° 0,05–0,25 0,1–0,5 ab
VBMW160404-2 2 3,3 0,4 5° 0,05–0,20 0,1–0,3 ab
VBMW160408-2 2 2,5 0,8 5° 0,05–0,25 0,1–0,5 ab
r
CBN – Positive Trigon 80°
WCMW d
80˚ l s
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
WCMW020102 1 1,4 0,2 7° 0,05–0,15 0,1–1,1 a b
WCMW020104 1 1,4 0,4 7° 0,05–0,20 0,1–1,1 a b
WCMW030204 1 2,4 0,4 7° 0,05–0,20 0,1–2,1 a b
WCMW030202 1 2,4 0,2 7° 0,05–0,15 0,1–2,1 a b
WCMW040204 1 2,4 0,4 7° 0,05–0,20 0,1–2,1 a b
WCMW040202 1 2,4 0,2 7° 0,05–0,15 0,1–2,1 a b
WCMW050304 1 2,4 0,4 7° 0,05–0,20 0,1–2,1 a b
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
PCD – Positive rhombic 80° r
CCGT / CCGW d δ
80˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
CCGT060204FS-M1 1 3,5 0,4 7° 0,08–0,20 0,1–2,0 a a
CCGT09T304FS-M1 1 4 0,4 7° 0,08–0,20 0,1–2,0 a a
CCGT060202FS-1 1 3,5 0,2 7° 7° 0,03–0,12 0,1–3,0 a a

CCGT060204FS-1 1 3,5 0,4 7° 7° 0,03–0,25 0,1–3,0 a a
CCGT060208FS-1 1 3,5 0,8 7° 7° 0,03–0,38 0,1–3,0 a a
CCGT09T304FS-1 1 4 0,4 7° 10° 0,03–0,25 0,1–3,5 a a
CCGT09T308FS-1 1 4 0,8 7° 10° 0,03–0,38 0,1–3,5 a a
CCGW060202FS-1 1 3,6 0,2 7° 0° 0,03–0,12 0,1–3,0 a a
CCGW060204FS-1 1 3,5 0,4 7° 0° 0,03–0,25 0,1–3,0 a a
CCGW060208FS-1 1 3,5 0,8 7° 0° 0,03–0,38 0,1–3,0 a a
CCGW09T302FS-1 1 4,1 0,2 7° 0° 0,03–0,12 0,1–3,5 a a
CCGW09T304FS-1 1 4,1 0,4 7° 0° 0,03–0,25 0,1–3,5 a a
CCGW09T308FS-1 1 4 0,8 7° 0° 0,03–0,38 0,1–3,5 a a
CCGW120404FS-1 1 4,1 0,4 7° 0° 0,03–0,25 0,1–3,5 a a
CCGW120408FS-1 1 4 0,8 7° 0° 0,03–0,38 0,1–3,5 a a
CCGW060204FSL-9 1 6,4 0,4 7° 0° 0,03–0,25 0,1–6,4 a a
CCGW09T304FSL-9 1 9,7 0,4 7° 0° 0,03–0,25 0,1–9,7 a a
CCGW09T308FSL-9 1 9,7 0,8 7° 0° 0,03–0,38 0,1–9,7 a a
CCGW060204FSR-9 1 6,4 0,4 7° 0° 0,03–0,25 0,1–6,4 a a
CCGW09T304FSR-9 1 9,7 0,4 7° 0° 0,03–0,25 0,1–9,7 a a
CCGW09T308FSR-9 1 9,7 0,8 7° 0° 0,03–0,38 0,1–9,7 a a
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
PCD – Positive rhombic 55°
DCGT / DCGW d δ
α
55˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
DCGT070204FS-M1 1 3,5 0,4 7° 0,08–0,20 0,1–2,0 a a
DCGT11T304FS-M1 1 4 0,4 7° 0,08–0,20 0,1–2,0 a a
DCGT070202FS-1 1 3,7 0,2 7° 7° 0,03–0,12 0,1–3,0 a a

DCGT070204FS-1 1 3,5 0,4 7° 7° 0,03–0,25 0,1–3,0 a a
DCGT070208FS-1 1 3,5 0,8 7° 7° 0,03–0,38 0,1–3,0 a a
DCGT11T302FS-1 1 4,2 0,2 7° 10° 0,03–0,12 0,1–3,5 a a
DCGT11T304FS-1 1 4 0,4 7° 10° 0,03–0,25 0,1–3,0 a a
DCGT11T308FS-1 1 4 0,8 7° 10° 0,03–0,38 0,1–3,5 a a
DCGW070202FS-1 1 3,7 0,2 7° 0° 0,03–0,12 0,1–3,0 a a
DCGW070204FS-1 1 3,5 0,4 7° 0° 0,03–0,25 0,1–3,0 a a
DCGW070208FS-1 1 3,5 0,8 7° 0° 0,03–0,38 0,1–3,0 a a
DCGW11T302FS-1 1 4,2 0,2 7° 0° 0,03–0,12 0,1–3,5 a a
DCGW11T304FS-1 1 4 0,4 7° 0° 0,03–0,25 0,1–3,5 a a
DCGW11T308FS-1 1 4 0,8 7° 0° 0,03–0,38 0,1–3,5 a a
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
PCD – Positive square
SCGW d δ
90˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
SCGW09T304FS-9 1 9,5 0,4 7° 0° 0,03–0,25 0,1–9,5 a a
r
PCD – Positive triangular 60°
TCGW d δ
α
60˚ s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
TCGW090202FS-1 1 3,9 0,2 7° 0° 0,03–0,12 0,1–3,0 a a
TCGW090204FS-1 1 3,8 0,4 7° 0° 0,03–0,25 0,1–3,0 a a
TCGW110202FS-1 1 4,4 0,2 7° 0° 0,03–0,12 0,1–3,0 a a
TCGW110204FS-1 1 4,3 0,4 7° 0° 0,03–0,25 0,1–3,0 a a
TCGW110208FS-1 1 4 0,8 7° 0° 0,03–0,38 0,1–3,0 a a
TCGW16T304FS-1 1 4,3 0,4 7° 0° 0,03–0,25 0,1–3,5 a a
TCGW16T308FS-1 1 4 0,8 7° 0° 0,03–0,38 0,1–3,5 a a
TCGW090204FS-9 1 9 0,4 7° 0° 0,03–0,25 0,1–9,0 a a
TCGW110204FS-9 1 10,4 0,4 7° 0° 0,03–0,25 0,1–10,4 a a
TCGW16T308FS-9 1 15,3 0,8 7° 0° 0,03–0,38 0,1–15,3 a a
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
PCD – Positive rhombic 35°
VCGT / VCGW d
δ
α
35˚
s
l
Indexable inserts
K N S H O
cutting edges
Number of
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
le r f ap
VCGT110302FS-1 1 4,1 0,2 7° 10° 0,03–0,12 0,1–3,0 a a
VCGT110304FS-1 1 3,7 0,4 7° 10° 0,03–0,25 0,1–3,0 a a
VCGT160404FS-1 1 4,5 0,4 7° 10° 0,03–0,25 0,1–4,0 a a
VCGT160408FS-1 1 4,5 0,8 7° 10° 0,03–0,38 0,1–4,0 a a
VCGW110302FS-1 1 4,1 0,2 7° 0° 0,03–0,12 0,1–3,0 a a
VCGW110304FS-1 1 3,7 0,4 7° 0° 0,03–0,25 0,1–3,0 a a
VCGW110308FS-1 1 3,7 0,8 7° 0° 0,03–0,38 0,1–3,0 a a
VCGW160404FS-1 1 4,5 0,4 7° 0° 0,03–0,25 0,1–4,0 a a
VCGW160408FS-1 1 4,5 0,8 7° 0° 0,03–0,38 0,1–4,0 a a
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
r
Ceramic – Negative rhombic 80°
CNGN / CNMA d
80˚ l s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
r f ap
CNGN120408T01020 0,8 0,10–0,22 0,1–3,6 b
CNGN120412T01020 1,2 0,10–0,32 0,1–3,6 b
CNGN120708T01020 0,8 0,10–0,22 0,1–3,6 ab
CNGN120712T01020 1,2 0,10–0,32 0,1–3,6 ab
CNGN120716T01020 1,6 0,10–0,42 0,1–3,6 ab
CNMA120408T02020 0,8 0,10–0,36 0,1–6,0 a
CNMA120412T02020 1,2 0,10–0,54 0,1–6,0 a
CNMA120416T02020 1,6 0,10–0,60 0,1–6,0 a
r
Ceramic – Negative rhombic 55°
DNGN / DNMA d
55˚ l s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
r f ap
DNGN150708T01020 0,8 0,10–0,20 0,1–2,5 b
DNGN150712T01020 1,2 0,10–0,32 0,1–2,5 b
DNMA150608T02020 0,8 0,10–0,36 0,1–7,5 a

DNMA150612T02020 1,2 0,10–0,54 0,1–7,5 a
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
Ceramic – Negative round
d
RNGN
s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
d f ap
RNGN120700E 12,7 0,10–0,32 0,1–3,6 ab
RNGN250700E 25,4 0,10–0,50 0,2–7,5 b
RNGN120700T01020 12,7 0,20–0,32 0,2–3,6 ab

RNGN150700T01020 15,875 0,10–0,40 0,2–4,5 b
RNGN190700T01020 19,05 0,10–0,45 0,2–5,7 b
r
Ceramic – Negative square
SNGN / SNMA d
90˚ l s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
r f ap
SNGN120712E 1,2 0,10–0,32 0,1–3,6 a
SNGN120708T01020 0,8 0,10–0,22 0,1–3,6 b

SNGN120712T01020 1,2 0,10–0,32 0,1–3,6 ab
SNGN120716T01020 1,6 0,10–0,42 0,1–3,6 b
SNMA120408T02020 0,8 0,10–0,36 0,1–6,0 a

SNMA120412T02020 1,2 0,10–0,54 0,1–6,0 a
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
60˚ r
Ceramic – Negative triangular 60°
TNMA d
l s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
r f ap
TNMA160408T02020 0,8 0,05–0,36 0,1–8,0 a
TNMA160412T02020 1,2 0,10–0,54 0,1–8,0 a
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
Ceramic – Positive round α
RCGX d
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
d f ap
Designation mm α mm mm
RCGX090700E 9,53 7° 0,10–0,25 0,1–2,4 a
RCGX120700E 12,7 7° 0,10–0,32 0,1–3,6 ab
RCGX060600T01020 6,35 7° 0,10–0,20 0,2–1,8 ab

RCGX090700T01020 9,53 7° 0,10–0,25 0,2–2,4 ab
RCGX120700T01020 12,7 7° 0,10–0,32 0,2–3,6 ab
Ceramic – Positive round α
RPGX d
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
d f ap
RPGX090700E 9,53 11° 0,10–0,20 0,1–2,4 a
RPGX120700E 12,7 11° 0,10–0,30 0,1–3,6 a
RPGX090700T01020 9,53 11° 0,10–0,20 0,2–2,4 a

RPGX120700T01020 12,7 11° 0,10–0,30 0,2–3,6 ab
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
Ceramic – Positive round
d
RPGN α
s
Indexable inserts
K N S H O
WWS20
WDN10
WDN10
WCB50
WSN10
WCB30
WCB80
WIS10
d f ap
RPGN090300T01020 9,53 11° 0,10–0,25 0,2–2,4 a
RPGN120400T01020 12,7 11° 0,10–0,32 0,2–3,6 a
See the ISO 1832 designation key for dimension BH = CBN with high CBN content
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
Ra/Rz
A 242 A 246 A 256 A 80 A 190
ISO turning
A1
Walter Turn/Walter Capto™ product description – External machining
External turning toolholders for indexable inserts with a negative basic shape
Walter Turn rigid clamping (D)

– The number one choice for machining short-chipping materials such as cast iron
– Functionality is maintained even in “dirty environments”, e.g. grey cast iron machining
– The number one choice for interrupted cuts thanks to stable insert clamping
– The indexable insert and shim can be replaced using the same wrench
– Reinforced clamps with carbide shoe available for longer clamp tool life
Walter Turn rigid clamping with precision cooling (D. . . -P)

– Coolant supplied directly through the clamp and along the flank face
– Optimum cooling increases tool life by 30-150%
– The number one choice for machining stainless materials (ISO M) and high-temperature
alloys (ISO S)
– Universal coolant connection: Direct coolant transfer between shank tool and tool
adaptor (A2120-P/A2121-P) or via coolant hose set with G1/8" thread (K601)
– Can be used from 10 bar up to a maximum coolant pressure of 150 bar
– Improved chip breaking, especially at pressures above 40 bar
Walter Turn lever clamp (P)

– Universal system enabling easy replacement of indexable inserts
– The number one choice for single-sided negative indexable inserts, e.g. SNMM for
heavy roughing
– Unobstructed chip evacuation and can be used as an alternative to rigid clamping
Walter Turn wedge-type clamping (M)

– For indexable inserts with a negative T basic shape
– Profiling is possible up to an angle of 22° with TNMG indexable inserts
– Frequently used when shaft machining with undercuts
Walter Turn rigid clamping for negative ceramic indexable inserts (C)
– Special system for ceramic indexable inserts without centre hole
– Rigid clamping with carbide shoe for a long service life
– The number one choice for machining high-temperature alloys and cast iron
workpieces with ceramic inserts
External turning toolholders for indexable inserts with a positive basic shape
Walter Turn screw clamping (S)

– For indexable inserts with a positive basic shape with 5° and 7° clearance angle
– The number one choice for low cutting pressures/small diameter shafts
– Fewer assembly parts are required
– Torx Plus screw clamping for transmitting higher tightening torques
– The indexable insert and shim can be replaced using the same wrench
Walter Turn positive lever clamp (P)

– For indexable inserts with a positive V/R basic shape with 5° and 7° clearance angle
– High dimensional accuracy is achieved on the component via the high pre-tension
applied by the lever with V indexable inserts
– Secure insert locking ensures round inserts are unable to twist during machining
A 78 Walter Turn turning tools – External machining

ISO turning
A1
External turning toolholders for indexable inserts with a positive basic shape
Walter Turn rigid clamping for positive ceramic indexable inserts (C)
– Special system for positive ceramic indexable inserts with 7° and 11° clearance angle
(RC . X/RP . X)
– Very stable, prism-shaped contact surface designed to prevent twisting
– Rigid clamping for maximum clamping force and low-vibration machining of
high-temperature alloys and cast iron workpieces
Tool adaptors for shank tools
A2120-P VDI axial adaptor for shank tools with precision cooling
– VDI 30/40/50 interface for star turrets
– Direct coolant transfer from the adaptor to the square shank at up to 80 bar
– For universal use in normal position or in an overhead position thanks to teeth on both
sides of VDI shank
– Maximum clamping force due to robust wedge-type clamping
– External cooling, can be switched on as an option
– For shank sizes of 20 × 20 mm and 25 × 25 mm
A2121-P VDI radial adaptor for shank tools with precision cooling
– VDI 30/40/50 interface for disc turrets
– Direct coolant transfer from the adaptor to the square shank at up to 80 bar
– For universal use in normal position or in an overhead position thanks to teeth both
sides of the VDI shank
– Maximum clamping force due to robust wedge-type clamping
– External cooling, can be switched on as an option
– For shank sizes of 20 × 20 mm and 25 × 25 mm
C . . . - ASH Walter Capto™ axial adaptor for shank tools

– Walter Capto™ C5-C8 interface
– For use on turn/mill centres or machines with star turrets
– Can be used up to a coolant pressure of 80 bar
– Various versions for 1, 2 or 3 shank tools
– Optimum power transmission via precision-ground polygon interface
– For shank sizes of 20 × 20 mm/25 × 25 mm/32 × 32 mm
C . . . - ASHA Walter Capto™ radial adaptor for shank tools

– Walter Capto™ C5-C8 interface
– Coolant nozzle can be switched on to the left/right via a screw
– Neutral version
– For use on turn/mill centres or machines with disc turrets
– Can be used up to a coolant pressure of 80 bar
– Optimum power transmission via precision-ground polygon interface
– For shank sizes of 20 × 20 mm/25 × 25 mm/32 × 32 mm
Walter Turn turning tools – External machining A 79

ISO turning
A1
Walter Turn turning tools product range overview – External machining

Square-shank turning toolholders – Negative basic shape
75°
Machining
95° 75°
80° 80° 80°

Type
CN . . CN . . CN . .
Designation DCLN DCLN...-P PCLN DCBN PCBN DCKN
Approach angle κ 95° 95° 95° 75° 75° 75°
Clamping system Clamp Clamp Lever Clamp Lever Clamp
Coolant supply external Precision cooling external external external external
Shank size h [mm] 16–32 20–25 16–50 25–32 25–32 25–32

Insert size l [mm] 9–19 12 9–25 12–19 12–19 12–16
Page A 93 A 94 A 95 A 96 A 97 A 98
75° ≤27°
Machining
≤12°30‘
45° 107°30‘ 93°
80° 80°
Type 55° 55°
CN . . CN . . DN . . DN . .
Designation PCKN PCSN DDHN DDJN DDJN...-P PDJN
Approach angle κ 75° 45° 107,5° 93° 93° 93°
Clamping system Lever Lever Clamp Clamp Clamp Lever
Coolant supply external external external external Precision cooling external
Shank size h [mm] 25 25 20–25 20–32 20–25 16–32

Insert size l [mm] 12 12 15 11–15 11–15 11–15
Page A 99 A 100 A 101 A 102 A 103 A 104
75°
Machining
62°30‘ ≤57°
75°
90° 90°
Type 55°
DN . . SN . . SN . .
Designation DDNN DSBN DSBN...-P PSBN DSKN PSKN
Approach angle κ 62,5° 75° 75° 75° 75° 75°
Clamping system Clamp Clamp Clamp Lever Clamp Lever
Coolant supply external external Precision cooling external external external
Shank size h [mm] 20–32 25–40 25 20–50 25–32 20–32

Insert size l [mm] 11–15 12–19 12 12–25 12–15 12–19
Page A 105 A 106 A 107 A 108 A 109 A 110

ISO turning
A1

Square-shank turning toolholders – Negative basic shape
Machining
≤22°
93°
45° 45° 91°
90° 90°
Type 60° 60°
SN . . SN . . TN . . TN . .
Designation DSSN PSSN DSDN PSDN MTJN DTGN
Approach angle κ 45° 45° 45° 45° 93° 91°
Clamping system Clamp Lever Clamp Lever Wedge Clamp
Coolant supply external external external external external external
Shank size h [mm] 16–32 16–32 16–32 12–40 20–32 20–32

Insert size l [mm] 9–19 9–19 9–19 9–25 16–22 16–22
Page A 111 A 112 A 113 A 114 A 115 A 116
Machining 91°
≤25° ≤44°
117°30‘ 72°30‘ ≤70°
93°
91°
Type 60° 60° 35° 35° 35°

TN . . TN . . VN . . VN . . VN . .
Designation DTGN...-P PTGN PTFN DVPN DVJN DVVN
Approach angle κ 91° 91° 91° 117,5° 93° 72,5°
Clamping system Clamp Lever Lever Clamp Clamp Clamp
Coolant supply Precision cooling external external external external external
Shank size h [mm] 20–25 12–40 12–32 25–32 20–32 20–32

Insert size l [mm] 16 11–27 11–16 16 16 16
Page A 117 A 118 A 119 A 120 A 121 A 122
Machining
95°
Type 80°
WN . .
Designation DWLN DWLN...-P PWLN
Approach angle κ 95° 95° 95°
Clamping system Clamp Clamp Lever
Coolant supply external Precision cooling external
Shank size h [mm] 16–32 20–25 16–32

Insert size l [mm] 6–10 8 6–10
Page A 123 A 124 A 125

ISO turning
A1

Square-shank turning toolholders – Positive basic shape
≤30°
Machining
≤12°30‘ 62°30‘ ≤60°
95° 107°30‘ 93° 90°
80°
Type 55° 55° 55°
CC . . DC . . DC . . DC . . RC . .
Designation SCLC SDHC SDJC SDNC SRDC PRDC
Approach angle κ 95° 107,5° 93° 62,5° 0° 0°
Clamping system Screw Screw Screw Screw Screw Lever
Shank size h [mm] 10–25 12–25 10–25 10–25 12–32 20–50

Insert size l [mm] 6–12 7–11 7–11 7–11 6–16 10–32
Page A 126 A 127 A 128 A 129 A 130 A 131
Machining
≤27°
75° 45° 45° 91°
90° 90° 90°

Type 60°
RC . . SC . . SC . . SC . . TC . .
Designation SRSC PRGC SSBC SSDC SSDCN STGC
Approach angle κ 0° 0° 75° 45° 45° 91°
Clamping system Screw Lever Screw Screw Screw Screw
Shank size h [mm] 20–32 20–40 12–25 16–25 12–25 12–25

Insert size l [mm] 6–16 10–25 9–12 9–12 9–12 11–16
Page A 132 A 133 A 134 A 135 A 136 A 137
Machining
≤35° ≤50° ≤70°
107°30‘ 72°30‘
93°
Type 35° 35° 35°

VB . . / VC . . VB . . / VC . . VB . . / VC . .
Designation SVHB PVHB SVJB PVJB SVVB PVVB
Approach angle κ 107,5° 107,5° 93° 93° 72,5° 72,5°
Clamping system Screw Lever Screw Lever Screw Lever
Shank size h [mm] 16–32 16–32 12–32 16–32 12–32 16–32

Insert size l [mm] 11–16 11–16 11–16 11–16 11–16 11–16
Page A 138 A 139 A 140 A 141 A 142 A 143

ISO turning
A1

Square-shank turning toolholders – Positive basic shape
Machining
95°
Type 80°
WC . .
Designation SWLC
Approach angle κ 95°
Clamping system Screw
Coolant supply external
Shank size h [mm] 12–25

Insert size l [mm] 4–8
Page A 144

Square-shank turning toolholders – Ceramic indexable inserts
Machining
15° 90° 90°
Type
RN . . RN . . RC . . / RP. .
Designation CRSN CRDN CRDC
Approach angle κ 0° 0° 0°
Clamping system Clamp Clamp Clamp
Coolant supply external external external
Shank size h [mm] 25–32 25–32 32

Insert size l [mm] 12–19 12 9–12
Page A 145 A 146 A 147

ISO turning
A1

Walter Capto™ turning toolholders – Negative basic shape
≤27°
Machining
95° 93°
80°
Type 55°
CN . . DN . .
Designation C...-DCLN C...-DCLN...-P C...-PCLN C...-DDJN C...-DDJN...-P C...-PDJN
Lead angle κ 95° 95° 95° 93° 93° 93°
Clamping system Clamp Clamp Lever Clamp Clamp Lever
Coolant supply internal Precision cooling internal internal Precision cooling internal
Walter Capto™ size C4–C8 C4–C6 C3–C8 C4–C8 C4–C6 C3–C6

Insert size l [mm] 12–19 12 12–25 11–15 11–15 11–15
Page A 148 A 149 A 150 A 151 A 152 A 153
75°
Machining
≤ 27° 75° 45°
90° 90° 90°

Type 55°
DN . . SN . . SN . . SN . .
Designation C...-DDUN C...-DSRN C...-PSRN C...-DSKN C...-PSKN C...-DSSN
Lead angle κ 93° 75° 75° 75° 75° 45°
Clamping system Clamp Clamp Lever Clamp Lever Clamp
Coolant supply internal internal internal internal internal internal

Insert size l [mm] 15 12–25 12–25 12–19 12–19 12–19
Page A 154 A 155 A 156 A 157 A 158 A 159
Machining
≤44°
≤22° 93°
93° 95°
45° 45° 91°
90° 90°
Type 60° 60° 35° 80°
SN . . SN . . TN . . TN . . VN . . WN . .
Designation C...-PSSN C...-DSDN C...-MTJN C...-DTGN...-P C...-DVJN C...-DWLN
Lead angle κ 45° 45° 93° 91° 93° 95°
Clamping system Lever Clamp Wedge Clamp Clamp Clamp
Coolant supply internal internal internal Precision cooling internal internal
Walter Capto™ size C4–C6 C4–C8 C3–C6 C4 C4–C8 C4–C6

Insert size l [mm] 12–19 12–25 16–22 16 16 6–10
Page A 160 A 161 A 162 A 163 A 164 A 165

ISO turning
A1

Walter Capto™ turning toolholders – Negative basic shape
Machining
95°
Type 80°
WN . .
Designation C...-DWLN...-P C...-PWLN
Lead angle κ 95° 95°
Clamping system Clamp Lever
Coolant supply Precision cooling internal
Walter Capto™ size C4–C6 C3–C6

Insert size l [mm] 8 6–10
Page A 166 A 167

ISO turning
A1

Walter Capto™ turning toolholders – Positive basic shape
≤30°
Machining
62°30‘ ≤60°
95° 93° 90° ≤27°
80°
Type 55° 55°
CC . . DC . . DC . . RC . . RC . .
Designation C...-SCLC C...-SDJC C...-SDNC C...-SRDC C...-PRDC C...-SRSC
Lead angle κ 95° 93° 62,5° 0° 0° 0°
Clamping system Screw Screw Screw Screw Lever Screw

Insert size l [mm] 9–12 7–11 11 6–16 16–25 6–16
Page A 168 A 169 A 170 A 171 A 172 A 173
Machining
≤35° ≤50°
≤27° 107°30‘
91° 93°
Type 60° 35° 35°

RC . . TC . . VB . . / VC . . VB . . / VC . .
Designation C...-PRSC C...-STGC C...-SVHB C...-PVHB C...-SVJB C...-PVJB
Lead angle κ 0° 91° 107,5° 107,5° 93° 93°
Clamping system Lever Screw Screw Lever Screw Lever

Insert size l [mm] 16–25 11–16 11–16 16 11–16 16
Page A 174 A 175 A 176 A 177 A 178 A 179
Machining
72°30‘ ≤70°
Type 35°
VB . . / VC . .
Designation C...-SVVB C...-PVVB
Lead angle κ 72,5° 72,5°
Clamping system Screw Lever
Coolant supply internal internal

Insert size l [mm] 11–16 16
Page A 180 A 181

ISO turning
A1

Walter Capto™ turning toolholders – Turning and milling centres
93° 95° 95° 95°

95°
27° ≤47° ≤47°
Machining
80° 80°
Type 55° 35° 35°
CN . . DN . . VN . . CC . . RC . . VB . . / VC . .
Designation C...-DCMN C...-DDMN C...-DVMN C...-SCMC C...-SRDC C...-SVMB
Lead angle κ 95° 93° 95° 95° 0° 95°
Clamping system Clamp Clamp Clamp Screw Screw Screw
Walter Capto™ size C5–C8 C5–C8 C8 C6 C6 C5–C6

Insert size l [mm] 12–16 15 16 12 10–16 16
Page A 182 A 183 A 184 A 185 A 186 A 187

A 88
ISO turning
A1
Turning system overview – Walter Turn external machining
Walter Capto™
VDI adaptors for square shanks Walter Capto™ adaptors Walter Capto™ 45° turning
with precision cooling for square shanks turning tools tools for turn/
mill centres
C…-ASHR/L
A2120-VDI-P A2121-VDI-P C…-ASHR/L3 C…-ASHA C… C…
Page D 16 Page D 17 Page D 11 Page D 12 Page A 84 Page A 87
Shank tools
e.g. DLCN…-P e.g. DLCN

Page A 80 Page A 80
= Precision cooling

ISO turning
A1
ISO designation key for turning toolholders – External machining
Example: Walter Turn
P W L N R 25 25 M 08 ...
1 2 3 4 5 6 7 8 9 10
0 1 2
Coupling size d1
Insert mounting type Indexable insert basic shape
[mm]
C = Walter Capto™ C Top clamping

C 80°
ISO 26623
C3 d1 = 32 D 55°
D Top and hole clamping
C4 d1 = 40
C5 d1 = 50 R
C6 d1 = 63 M Top and hole clamping
90°
S
C8 d1 = 80
60°
T
P Hole clamping
35°
V
S Screw clamping
d1 W 80°
5 6 7
Turning toolholder height h1 Toolholder width b or f dimension
Turning toolholder design
[mm] [mm]
Height of the peripheral Shank width b in mm.

cutting edge h1 in mm. Figures after the decimal
Figures after the decimal point are ignored.
point are ignored. Single-digit numbers
Single-digit numbers are preceded by a “0”,
are preceded by a “0”, e.g b = 8 mm = 08.
e.g h1 = 8 mm = 08. For CA cartridges.
h1
f

ISO turning
A1
Example: Walter Capto™
C5 – P W L N R – 22 110 – 08 ...
0 1 2 3 4 5 7 8 9 10
3 4
Approach angle Indexable insert clearance angle
90° 45° 60° 90°
75° B
90° 5°
C
75° 95° 50° 7°
90° 107° 93° 95°

30°
E
20°
93° 72,5°
63°
75° 45° 60° F

25°
N
60° 85° 0°
X
Approach angles not specified in the standard.
Specific information required. P
11 °
8 9 10
Turning toolholder length l1/l4 Length of cutting edge l
Manufacturer option
[mm] [mm]
32 = A If necessary, an additional symbol comprising a maximum of three

40 = B letters or figures can be added to the standard code.
50 = C l
60 = D This symbol must be separated from the standard designation with
70 = E l1 a hyphen.
80 = F
100 = H
110 = J l
–W = Wedge-type clamping
125 = K –P = Precision cooling
140 = L
150 = M
160 = N
170 = P l
180 = Q l4
200 = R
250 = S
300 = T l
350 = U
400 = V Special = X
450 = W 500 = Y

ISO turning
A1
Walter Select – External machining
short, stable long, unstable
Workpiece characteristics
Basic shape Negative basic shape Positive basic shape
Holder clamping system Rigid clamping Rigid clamping Lever clamp Wedge-type Screw clamping Lever clamp
Walter Turn/Walter Capto™ with precision clamping
cooling (-P)
Product range overview Page A 80 Page A 80 Page A 80 Page A 81 Page A 82 Page A 82
Step 1:
Selecting the contour
to be machined
Longitudinal turning/facing CC CC CC C CC CC
Profile turning CC CC CC CC CC CC
Facing CC CC CC — CC CC
Necking CC CC C — C CC
Interrupted cuts CC CC C C CC C
Step 2:
Selecting the material
to be machined
P Steel CC C CC CC CC CC
M Stainless steel C CC CC CC CC CC
K Cast iron CC C C C CC C
N NF metals — — C — CC CC

S CC CC CC C CC CC
cutting properties
H Hard materials CC C C C C C
O Other — — C — C C
plication
Primary ap
ation
Other applic
ISO turning
A1
Shank tool – Rigid clamping
DCLN
Walter Turn
95° CN . . CN . .
Tool h = h1 b f l1 l4
Designation mm mm mm mm mm γ λs Type
b DCLNR/L1616H09 9 16 16 20 100 24,8 -6° -6°
DCLNR/L2020K09 9 20 20 25 125 24,8 -6° -6° CN .. 0903 ..
DCLNR/L2525M09 9 25 25 32 150 24,8 -6° -6°
DCLNR/L1616H12 12 16 16 20 100 32,2 -6° -6°
l1
DCLNR/L2020K12 12 20 20 25 125 32 -6° -6°
h CN .. 1204 ..
DCLNR/L2525M12 12 25 25 32 150 32 -6° -6°
95˚ DCLNR/L3225P12 12 32 25 32 170 32 -6° -6°
l4
h1 f DCLNR/L2525M16 16 25 25 32 150 39 -6° -6°

DCLNR/L3225P16 16 32 25 32 170 39 -6° -6° CN .. 1606 ..
DCLNR/L3232P16 16 32 32 40 170 39 -6° -6°
DCLNR/L3232P19 19 32 32 40 170 43,2 -6° -6° CN .. 1906 ..
Measured with master insert: CN .. 090308 / CN .. 120408 / CN .. 160612 / CN .. 190612
For information regarding the rake angle γ (for indexable inserts without chip groove) and regarding the inclination angle λs − see “Technical information − ISO turning”
Ordering example, right-hand tool: DCLNR1616H09/ordering example, left-hand tool: DCLNL1616H09
Bodies and assembly parts are included in the scope of delivery.
Assembly parts Type CN .. 0903 .. CN .. 1204 .. CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..

h = h1 [mm] 16–25 16 20–32 25–32 32
Shim AP414-CN09 AP354-CN12 AP301-CN12 AP302-CN16 AP303-CN19
FS1462 FS1461 FS1461 FS1463 FS1463

Screw for shim
(Torx 9IP) (Torx 15IP) (Torx 15IP) (Torx 20IP) (Torx 20IP)
Tightening torque
1,5 Nm 2,5 Nm 2,5 Nm 5,0 Nm 5,0 Nm
Clamp PK240 PK241 PK241 PK242 PK243
FS1472 FS1473 FS1473 FS1474 FS1474

Clamp screw
Tightening torque
1,7 Nm 3,9 Nm 3,9 Nm 6,4 Nm 6,4 Nm
Pressure spring FS1469 FS1470 FS1470 FS1471 FS1471
Pin RS116 RS117 RS117 RS117 RS117
FS1465 FS1465
FS1466 FS1464 FS1464
Torx key (Torx 15IP / (Torx 15IP /
(Torx 9IP) (Torx 20IP) (Torx 20IP)
SW 3,5) SW 3,5)
Accessories
Type CN .. 0903 .. CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Clamp set
PK240 SET PK241 SET PK242 SET PK243 SET
(standard assembly parts)
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for CN .. 1207 .. AP411-CN1207
A 20 D1 A 93 A 93 A 93

ISO turning
A1
DCLN...-P
Walter Turn
– Precision cooling
95° CN . .
Tool h = h1 b b1 f l1 l4
Designation mm mm mm mm mm mm γ λs Type
h DCLNR/L2020X12-P 12 20 20 10 25 115 38,5 -6° -6°
b CN .. 1204 ..
DCLNR/L2525X12-P 12 25 25 4 32 130 38,5 -6° -6°
l1
b1
l4
h1 f
Measured with master insert: CN .. 120408

For the connection set for coolant supply with G1/8" thread, see “Assembly parts and accessories”
The maximum recommended coolant pressure is 150 bar (2175 psi)
Ordering example, right-hand tool: DCLNR2020X12-P/ordering example, left-hand tool: DCLNL2020X12-P
Assembly parts
Type CN .. 1204 ..
Shim AP301-CN12
Screw for shim FS1461 (Torx 15IP)

Tightening torque 2,5 Nm
Left clamp PK261L
Right clamp PK261R
Clamp screw FS1473 (Torx 15IP)

Pressure spring FS2188
G 1/8" threaded pin FS2258 (SW 5)
M6 threaded pin FS2288 (SW 3)
Torx key FS1465 (Torx 15IP / SW 3,5)
Accessories
Type CN .. 1204 ..
Left-hand clamp set
PK261L SET
Right-hand clamp set
PK261R SET
A 20 D1 A 93 A 93 A 93

ISO turning
A1
Shank tool – Lever clamp
PCLN
Walter Turn
95° CN . . CN . .
b PCLNR/L1616H09 9 16 16 20 100 24,2 -6° -6°
PCLNR/L2020K09 9 20 20 25 125 24,2 -6° -6° CN .. 0903 ..
PCLNR/L2525M09 9 25 25 32 150 24,2 -6° -6°
PCLNR/L1616H12 12 16 16 20 100 27,2 -6° -6°
l1
PCLNR/L2020K12 12 20 20 25 125 27,2 -6° -6°
h CN .. 1204 ..
PCLNR/L2525M12 12 25 25 32 150 27,2 -6° -6°
95˚
l4 PCLNR/L3225P12 12 32 25 32 170 27,2 -6° -6°
h1 f PCLNR/L2525M16 16 25 25 32 150 33,9 -6° -6°
PCLNR/L3225P16 16 32 25 32 170 33,9 -6° -6° CN .. 1606 ..
PCLNR/L3232P16 16 32 32 40 170 33,9 -6° -6°
PCLNR/L3232P19 19 32 32 40 170 37,9 -6° -6°
CN .. 1906 ..
PCLNR/L4040S19 19 40 40 50 250 37,9 -6° -6°
PCLNR/L4040S25 25 40 40 50 250 50 -6° -6°
CN .. 2509 ..
PCLNR/L5050T25 25 50 50 60 300 50 -6° -6°
Measured with master insert: CN .. 090308 / CN .. 120408 / CN .. 160612 / CN .. 190612 / CN .. 250924
Ordering example, right-hand tool: PCLNR1616H09/ordering example, left-hand tool: PCLNL1616H09
Assembly parts Type CN .. 0903 .. CN .. 1204 .. CN .. 1204 .. CN .. 1606 .. CN .. 1906 .. CN .. 2509 ..

h = h1 [mm] 16–25 16 20–32 25–32 32–40 40–50
AP408-CN0908 AP134-CN1216 AP134-CN1216 AP135-CN1624 AP136-CN1924 AP192-CN2524
Shim for radius
r ≤ 0,8 mm r ≤ 1,6 mm r ≤ 1,6 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm
Lever KN101 KN121 KN102 KN104 KN106 KN107
Clamping screw FS351 (SW 2,5) FS2129 (SW 3) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4) FS357 (SW 5)
Tightening torque 2,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 10,0 Nm 14,0 Nm
Shim pin RS120 RS102 RS102 RS103 RS104 RS105
Tapered assembly pin MD101 MD101 MD101 MD102 MD102 MD103
ISO2936-2,5 ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-4 ISO2936-5

Allen key
(SW 2,5) (SW 3) (SW 3) (SW 3) (SW 4) (SW 5)
Accessories
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Shim AP134-CN1208 AP135-CN1616 AP136-CN1912
for radius r ≤ 0,8 mm r ≤ 1,6 mm r ≤ 1,2 mm
A 20 D1 A 93 A 93

ISO turning
A1
DCBN
Walter Turn
75° CN . . CN . .
b DCBNR/L2525M12 12 25 25 22 150 34,6 -6° -6°
CN .. 1204 ..
DCBNR/L3225P12 12 32 25 22 170 34,6 -6° -6°
DCBNR/L2525M16 16 25 25 22 150 41,5 -6° -6°
CN .. 1606 ..
DCBNR/L3232P16 16 32 32 27 170 41,6 -6° -6°
l1
DCBNR/L3232P19 19 32 32 27 170 46,1 -6° -6° CN .. 1906 ..
h
75˚
l4
h1 f
Measured with master insert: CN .. 120408 / CN .. 160612 / CN .. 190612

Ordering example, right-hand tool: DCBNR2525M12/ordering example, left-hand tool: DCBNL2525M12
Assembly parts
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Screw for shim FS1461 (Torx 15IP) FS1463 (Torx 20IP) FS1463 (Torx 20IP)
Tightening torque 2,5 Nm 5,0 Nm 5,0 Nm
Clamp PK241 PK242 PK243
Clamp screw FS1473 (Torx 15IP) FS1474 (Torx 20IP) FS1474 (Torx 20IP)
Pressure spring FS1470 FS1471 FS1471
Pin RS117 RS117 RS117
Torx key FS1465 (Torx 15IP / SW 3,5) FS1464 (Torx 20IP) FS1464 (Torx 20IP)
Accessories
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Clamp set
PK241 SET PK242 SET PK243 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for CN .. 1207 .. AP411-CN1207
A 20 D1 A 93 A 93 A 93

ISO turning
A1
PCBN
Walter Turn
75° CN . . CN . .
b PCBNR/L2525M12 12 25 25 22 150 26,9 -6° -6° CN .. 1204 ..
PCBNR/L2525M16 16 25 25 22 150 33,6 -6° -6°
CN .. 1606 ..
PCBNR/L3232P16 16 32 32 27 170 33,6 -6° -6°
PCBNR/L3232P19 19 32 32 27 170 37,5 -6° -6° CN .. 1906 ..
l1
h
75˚
l4
h1 f

Ordering example, right-hand tool: PCBNR2525M12/ordering example, left-hand tool: PCBNL2525M12
Assembly parts
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Lever KN102 KN104 KN106
Clamping screw FS352 (SW 3) FS354 (SW 3) FS356 (SW 4)

Shim pin RS102 RS103 RS104
Tapered assembly pin MD101 MD102 MD102
Allen key ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-4 (SW 4)
Accessories
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
A 20 D1 A 93 A 93

ISO turning
A1
DCKN
Walter Turn
75°
CN . . CN . .
b DCKNR/L2525M12 12 25 25 32 150 21,1 -6° -6°
CN .. 1204 ..
DCKNR/L3225P12 12 32 25 32 170 21,1 -6° -6°
DCKNR/L3232P16 16 32 32 40 170 26 -6° -6° CN .. 1606 ..
l1
l4
75˚
h1 f
Measured with master insert: CN .. 120408 / CN .. 160612

Ordering example, right-hand tool: DCKNR2525M12/ordering example, left-hand tool: DCKNL2525M12
Assembly parts
Type CN .. 1204 .. CN .. 1606 ..
Shim AP301-CN12 AP302-CN16
Screw for shim FS1461 (Torx 15IP) FS1463 (Torx 20IP)

Tightening torque 2,5 Nm 5,0 Nm
Clamp PK241 PK242
Clamp screw FS1473 (Torx 15IP) FS1474 (Torx 20IP)

Pressure spring FS1470 FS1471
Pin RS117 RS117
Torx key FS1465 (Torx 15IP / SW 3,5) FS1464 (Torx 20IP)
Accessories
Type CN .. 1204 .. CN .. 1606 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for CN .. 1207 .. AP411-CN1207
A 20 D1 A 93 A 93 A 93

ISO turning
A1
PCKN
Walter Turn
75°
CN . . CN . .
b PCKNR/L2525M12 12 25 25 32 150 22,9 -6° -6° CN .. 1204 ..
l1
l4
h1
75˚
f

Ordering example, right-hand tool: PCKNR2525M12/ordering example, left-hand tool: PCKNL2525M12
Assembly parts
Type CN .. 1204 ..
Shim AP134-CN1216
for radius r ≤ 1,6 mm
Lever KN102
Clamping screw FS352 (SW 3)

Shim pin RS102
Tapered assembly pin MD101
Allen key ISO2936-3 (SW 3)
Accessories
Type CN .. 1204 ..
Shim AP134-CN1208
A 20 D1 A 93 A 93

ISO turning
A1
PCSN
Walter Turn
45° CN . .
CN . .
Tool h = h1 b f f1 l1 l4 l20
Designation mm mm mm mm mm mm mm γ λs Type
b PCSNR/L2525M12 12 25 25 32 23,9 150 19,7 160 -8° -8° CN .. 1204 ..
l1 l
20
h
45˚ l4
f1
h1 f

Ordering example, right-hand tool: PCSNR2525M12/ordering example, left-hand tool: PCSNL2525M12
Assembly parts
Type CN .. 1204 ..
Shim AP134-CN1216
Lever KN102
Clamping screw FS352 (SW 3)

Shim pin RS102
Allen key ISO2936-3 (SW 3)
Accessories
Type CN .. 1204 ..
Shim AP134-CN1208
A 20 D1 A 93 A 93

ISO turning
A1
DDHN
Walter Turn ≤12°30‘
107°30‘
DN . . DN . .
b DDHNR/L2020K15 15 20 20 25 125 36,1 -6° -7°
DN .. 1506 ..
DDHNR/L2525M15 15 25 25 32 150 36,1 -6° -7°
l1
h l4
107˚30'
h1 f
Measured with master insert: DN .. 150608

Ordering example, right-hand tool: DDHNR2020K15/ordering example, left-hand tool: DDHNL2020K15
Assembly parts
Type DN .. 1506 ..
Shim AP304-DN15

Clamp PK241

Pin RS117
Accessories
Type DN .. 1506 ..
Clamp set
PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 93 A 93 A 93

ISO turning
A1
DDJN
Walter Turn
≤27°
93°
DN . . DN . .
b DDJNR/L2020K11 11 20 20 25 125 30,2 -6° -7°
DDJNR/L2525M11 11 25 25 32 150 30,2 -6° -7° DN .. 1104 ..
DDJNR/L3225P11 11 32 25 32 170 30,2 -6° -7°
DDJNR/L2020K15 15 20 20 25 125 39,4 -6° -7°
l1 DDJNR/L2525M15 15 25 25 32 150 39,4 -6° -7°
h DN .. 1506 ..
DDJNR/L3225P15 15 32 25 32 170 39,4 -6° -7°
DDJNR/L3232P15 15 32 32 40 170 39,4 -6° -7°
93˚ l4
h1 f
Measured with master insert: DN .. 110408 / DN .. 150608

Ordering example, right-hand tool: DDJNR2020K11/ordering example, left-hand tool: DDJNL2020K11
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..
Shim AP305-DN11 AP304-DN15

Clamp PK240 PK241

Pin RS116 RS117
Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP / SW 3,5)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 93 A 93 A 93

ISO turning
A1
DDJN...-P
Walter Turn
≤27°
93°
DN . .
h DDJNR/L2020X11-P 11 20 20 6 25 125 48,5 -6° -7° DN .. 1104 ..
b
DDJNR/L2020X15-P 15 20 20 7 25 125 48,5 -6° -7°
DN .. 1506 ..
DDJNR/L2525X15-P 15 25 25 3 32 140 48,5 -6° -7°
M6
b1 l1
l4
h1 f

Ordering example, right-hand tool: DDJNR2020X11-P/ordering example, left-hand tool: DDJNL2020X11-P
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..

Left clamp PK261L PK261L
Right clamp PK261R PK261R

G 1/8" screw FS2258 (SW 5) FS2258 (SW 5)
M6 threaded pin FS2288 (SW 3) FS2288 (SW 3)
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Left-hand clamp set
PK261L SET PK261L SET
PK261R SET PK261R SET
Shim for DN .. 1504 .. AP304-DN1504
A 24 D1 A 93 A 93 A 93

ISO turning
A1
PDJN
Walter Turn
≤27°
93°
DN . . DN . .
b PDJNR/L1616H11 11 16 16 20 100 29,7 -6° -7°
PDJNR/L2020K11 11 20 20 25 125 29,7 -6° -7°
DN .. 1104 ..
PDJNR/L2525M11 11 25 25 32 150 29,7 -6° -7°
PDJNR/L3225P11 11 32 25 32 170 29,7 -6° -7°
l1 PDJNR/L2020K15 15 20 20 25 125 36,2 -6° -7°
h PDJNR/L2525M15 15 25 25 32 150 36,2 -6° -7°
DN .. 1506 ..
PDJNR/L3225P15 15 32 25 32 170 36,2 -6° -7°
93˚ l4
PDJNR/L3232P15 15 32 32 40 170 36,2 -6° -7°
h1 f

Ordering example, right-hand tool: PDJNR1616H11/ordering example, left-hand tool: PDJNL1616H11
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..
for radius r ≤ 1,2 mm r ≤ 1,6 mm
Lever KN119 KN103
Clamping screw FS351 (SW 2,5) FS355 (SW 3)

Shim pin RS101 RS102
Tapered assembly pin MD101 MD101
Allen key ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Shim for DN .. 1504 .. AP357-DN1508
Shim for DN .. 1504 .. AP357-DN1516
A 24 D1 A 93 A 93

ISO turning
A1
DDNN
Walter Turn
62°30‘ ≤57°
DN . . DN . .
b DDNNN2020K11 11 20 20 10 125 31,2 -5° -9°
DN .. 1104 ..
DDNNN2525M11 11 25 25 13 150 31,2 -5° -9°
DDNNN2525M15 15 25 25 13 150 40,8 -5° -9°
DN .. 1506 ..
DDNNN3225P15 15 32 25 13 170 40,8 -5° -9°
l1
h l4
62˚30' 62˚30'
γ f
h1

Assembly parts
Type DN .. 1104 .. DN .. 1506 ..

Clamp PK240 PK241

Pin RS116 RS117
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 93 A 93 A 93

ISO turning
A1
DSBN
Walter Turn
75° SN . .
SN . .
b DSBNR/L2525M12 12 25 25 22 150 34,3 -6° -6°
SN .. 1204 ..
DSBNR/L3225P12 12 32 25 22 170 34,3 -6° -6°
DSBNR/L3232P15 15 32 32 27 170 41,5 -6° -6° SN .. 1506 ..
DSBNR/L3232P19 19 32 32 27 170 46,4 -6° -6°
l1
SN .. 1906 ..
DSBNR/L4040S19 19 40 40 35 250 46,5 -6° -6°
h
75˚ l4
h1 f
Measured with master insert: SN .. 120408 / SN .. 150612 / SN .. 190612

Ordering example, right-hand tool: DSBNR2525M12/ordering example, left-hand tool: DSBNL2525M12
Assembly parts
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Shim AP308-SN12 AP309-SN15 AP310-SN19
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 93 A 93 A 93

ISO turning
A1
DSBN...-P
Walter Turn
75°
SN . .
h DSBNR/L2525X12-P 12 25 25 7 22 135 43,5 -6° -6° SN .. 1204 ..
b
M6
b1 l1
l4
h1 f
Measured with master insert: SN .. 120408

Ordering example, right-hand tool: DSBNR2525X12-P/ordering example, left-hand tool: DSBNL2525X12-P
Assembly parts
Type SN .. 1204 ..
Shim AP308-SN12

Left clamp PK261L
Right clamp PK261R

G 1/8" screw FS2258 (SW 5)
Accessories
Type SN .. 1204 ..
Left-hand clamp set
PK261L SET
PK261R SET
A 27 D1 A 93 A 93 A 93

ISO turning
A1
PSBN
Walter Turn
75° SN . .
SN . .
b PSBNR/L2020K12 12 20 20 17 125 27,5 -6° -6°
PSBNR/L2525M12 12 25 25 22 150 27,5 -6° -6° SN .. 1204 ..
PSBNR/L3225P12 12 32 25 22 170 27,5 -6° -6°
PSBNR/L2525M15 15 25 25 22 150 32 -6° -6°
l1 SN .. 1506 ..
PSBNR/L3232P15 15 32 32 27 170 32 -6° -6°
PSBNR/L3232P19 19 32 32 27 170 39,2 -6° -6°
h SN .. 1906 ..
75˚ PSBNR/L4040S19 19 40 40 35 250 41,5 -6° -6°
l4
PSBNR/L4040S25 25 40 40 35 250 47,5 -6° -6°
h1 f SN .. 2507 ..
PSBNR/L5050T25 25 50 50 43 300 47,5 -6° -6°
Measured with master insert: SN .. 120408 / SN .. 150612 / SN .. 190612 / SN .. 250724
Ordering example, right-hand tool: PSBNR2020K12/ordering example, left-hand tool: PSBNL2020K12
Assembly parts
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
Shim AP141-SN1216 AP142-SN1524 AP143-SN1924 AP144-SN2524
for radius r ≤ 1,6 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm
Lever KN102 KN104 KN106 KN107
Clamping screw FS352 (SW 3) FS354 (SW 3) FS356 (SW 4) FS357 (SW 5)
Tightening torque 5,0 Nm 5,0 Nm 10,0 Nm 14,0 Nm
Shim pin RS102 RS103 RS104 RS105
Tapered assembly pin MD101 MD102 MD102 MD103
Allen key ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-4 (SW 4) ISO2936-5 (SW 5)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
Shim for SN .. 2509 .. AP191-SN250924
A 27 D1 A 93 A 93

ISO turning
A1
DSKN
Walter Turn
75°
SN . . SN . .
b DSKNR/L2525M12 12 25 25 32 150 23,6 -6° -6° SN .. 1204 ..
DSKNR/L3232P15 15 32 32 40 170 28,9 -6° -6° SN .. 1506 ..
l1
l4
75˚
h1
f
Measured with master insert: SN .. 120408 / SN .. 150612

Ordering example, right-hand tool: DSKNR2525M12/ordering example, left-hand tool: DSKNL2525M12
Assembly parts
Type SN .. 1204 .. SN .. 1506 ..
Shim AP308-SN12 AP309-SN15

Clamp PK241 PK242

Pin RS117 RS117
Accessories
Type SN .. 1204 .. SN .. 1506 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 93 A 93 A 93

ISO turning
A1
PSKN
Walter Turn
75°
SN . . SN . .
b PSKNR/L2020K12 12 20 20 25 125 23 -6° -6°
SN .. 1204 ..
PSKNR/L2525M12 12 25 25 32 150 23 -6° -6°
PSKNR/L3232P19 19 32 32 40 170 32,4 -6° -6° SN .. 1906 ..
l1
l4
75˚
h1 f

Ordering example, right-hand tool: PSKNR2020K12/ordering example, left-hand tool: PSKNL2020K12
Assembly parts
Type SN .. 1204 .. SN .. 1906 ..
Lever KN102 KN106
Clamping screw FS352 (SW 3) FS356 (SW 4)

Allen key ISO2936-3 (SW 3) ISO2936-4 (SW 4)
Accessories
Type SN .. 1204 .. SN .. 1906 ..
A 27 D1 A 93 A 93

ISO turning
A1
DSSN
Walter Turn
45°
SN . . SN . .
b DSSNR/L1616H09 9 16 16 20,3 13,92 100 21,3 106,1 -8° 0° SN .. 0903 ..
DSSNR/L2020K12 12 20 20 25 16,68 125 27,5 133,3 -8° 0°
DSSNR/L2525M12 12 25 25 32 23,68 150 27,5 158,3 -8° 0° SN .. 1204 ..
DSSNR/L3225P12 12 32 25 32 23,68 170 27,5 178,3 -8° 0°
l1 l
20
DSSNR/L2525M15 15 25 25 32 21,76 150 32 160,2 -8° 0°
DSSNR/L3225P15 15 32 25 32 21,76 170 32 180,2 -8° 0° SN .. 1506 ..
h
45˚ l4 DSSNR/L3232P15 15 32 32 40 29,76 170 32 180,2 -8° 0°
DSSNR/L3232P19 19 32 32 40 27,52 170 37 182,5 -8° 0° SN .. 1906 ..
f1
h1 f

Ordering example, right-hand tool: DSSNR1616H09/ordering example, left-hand tool: DSSNL1616H09
Assembly parts
Type SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Screw for shim FS1462 (Torx 9IP) FS1461 (Torx 15IP) FS1463 (Torx 20IP) FS1463 (Torx 20IP)
Clamp PK240 PK241 PK242 PK243
Clamp screw FS1472 (Torx 9IP) FS1473 (Torx 15IP) FS1474 (Torx 20IP) FS1474 (Torx 20IP)
Pressure spring FS1469 FS1470 FS1471 FS1471
Pin RS116 RS117 RS117 RS117
FS1465 (Torx 15IP /

Torx key FS1466 (Torx 9IP) FS1464 (Torx 20IP) FS1464 (Torx 20IP)
SW 3,5)
Accessories
Type SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 93 A 93 A 93

ISO turning
A1
PSSN
Walter Turn
45°
SN . . SN . .
b PSSNR/L1616H09 9 16 16 20,4 13,92 100 19 106,1 -8° 0° SN .. 0903 ..
PSSNR/L2020K12 12 20 20 25 16,68 125 20,2 133,3 -8° 0°
PSSNR/L2525M12 12 25 25 32 23,68 150 20,2 158,3 -8° 0° SN .. 1204 ..
l20
l1 PSSNR/L3225P12 12 32 25 32 23,68 170 20,2 178,3 -8° 0°
PSSNR/L2525M15 15 25 25 32 21,76 150 25,3 160,2 -8° 0°
SN .. 1506 ..
h PSSNR/L3232P15 15 32 32 40 29,76 170 25,3 180,2 -8° 0°
45˚ l4
PSSNR/L3232P19 19 32 32 40 27,52 170 28 182,5 -8° 0° SN .. 1906 ..
f1
h1 f

Ordering example, right-hand tool: PSSNR1616H09/ordering example, left-hand tool: PSSNL1616H09
Assembly parts
Type SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamping screw FS351 (SW 2,5) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4)
Allen key ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-4 (SW 4)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
A 27 D1 A 93 A 93

ISO turning
A1
DSDN
Walter Turn
45° SN . . SN . .
b DSDNN1616H09 9 16 16 8 100 28,1 -6° -6° SN .. 0903 ..
DSDNN2020K12 12 20 20 10 125 36,5 -6° -6°
DSDNN2525M12 12 25 25 13 150 36,5 -6° -6° SN .. 1204 ..
DSDNN3225P12 12 32 25 13 170 36,5 -6° -6°
l1
DSDNN2525M15 15 25 25 13 150 44,8 -6° -6° SN .. 1506 ..
h l4 DSDNN3225P19 19 32 25 13 170 49,5 -6° -6° SN .. 1906 ..
45˚ 45˚
h1 f

Assembly parts
Type SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
FS1465 (Torx 15IP /

SW 3,5)
Accessories
Type SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 93 A 93 A 93

ISO turning
A1
PSDN
Walter Turn
45° SN . . SN . .
b PSDNN1212F09 9 12 12 6 80 20 -6° -6°
SN .. 0903 ..
PSDNN1616H09 9 16 16 8 100 21 -6° -6°
PSDNN2020K12 12 20 20 10 125 27,6 -6° -6°
PSDNN2525M12 12 25 25 13 150 27,6 -6° -6° SN .. 1204 ..
l1 PSDNN3225P12 12 32 25 13 170 27,6 -6° -6°
h PSDNN3225P15 15 32 25 13 170 36 -6° -6° SN .. 1506 ..
PSDNN3232P19 19 32 32 16 170 40,4 -6° -6° SN .. 1906 ..
l4
PSDNN4040S25 25 40 40 21 250 48,8 -6° -6° SN .. 2507 ..
45˚ 45˚
h1 f
Measured with master insert: SN .. 090308 / SN .. 120408 / SN .. 150612 / SN .. 190612 / SN .. 250724

Assembly parts Type SN .. 0903 .. SN .. 0903 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..

h = h1 [mm] 12 16 20–32 32 32 40
Shim AP409-SN0908 AP141-SN1216 AP142-SN1524 AP143-SN1924 AP144-SN2524
for radius r ≤ 0,8 mm r ≤ 1,6 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm
Clamping screw FS2182 (SW 2) FS351 (SW 2,5) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4) FS357 (SW 5)
Shim pin RS120 RS102 RS103 RS104 RS105
Tapered assembly pin MD101 MD101 MD102 MD102 MD103
ISO2936-2 ISO2936-2,5 ISO2936-3 ISO2936-3 ISO2936-4 ISO2936-5

Allen key
(SW 2) (SW 2,5) (SW 3) (SW 3) (SW 4) (SW 5)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
A 27 D1 A 93 A 93

ISO turning
A1
Shank tool – Wedge-type clamping
MTJN
Walter Turn
≤22°
93°
TN . . TN . .
b MTJNR/L2020K16 16 20 20 25 125 30,8 -6° -6°
MTJNR/L2525M16 16 25 25 32 150 30,8 -6° -6° TN .. 1604 ..
MTJNR/L3225P16 16 32 25 32 170 30,8 -6° -6°
MTJNR/L2525M22 22 25 25 32 150 34,8 -6° -6°
TN .. 2204 ..
l1 MTJNR/L3225P22 22 32 25 32 170 34,8 -6° -6°
93˚
l4
h1 f
Measured with master insert: TN .. 160408 / TN .. 220408

Ordering example, right-hand tool: MTJNR2020K16/ordering example, left-hand tool: MTJNL2020K16
Assembly parts
Type TN .. 1604 .. TN .. 2204 ..
Clamping wedge set FK303 (SW 2,5) FK304 (SW 3)
Shim AP147 AP148

Pin RS106 RS107
Clamping screw FS358 (SW 3) FS358 (SW 3)

Allen key ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3)
Accessories
Type TN .. 2204 ..
Shim AP149
A 30 D1 A 93 A 93

ISO turning
A1
DTGN
Walter Turn
91° TN . .
TN . .
b DTGNR/L2020K16 16 20 20 25 125 25,4 -6° -6°
DTGNR/L2525M16 16 25 25 32 150 24,6 -6° -6° TN .. 1604 ..
DTGNR/L3225P16 16 32 25 32 170 25,3 -6° -6°
DTGNR/L2525M22 22 25 25 32 150 32,1 -6° -6°
l1 TN .. 2204 ..
DTGNR/L3225P22 22 32 25 32 170 33,1 -6° -6°
h
91˚
l4
h1 f

Ordering example, right-hand tool: DTGNR2020K16/ordering example, left-hand tool: DTGNL2020K16
Assembly parts
Type TN .. 1604 .. TN .. 2204 ..
Shim AP321-TN16 AP322-TN22

Clamp PK240 PK241

Pin RS116 RS117
Accessories
Type TN .. 1604 .. TN .. 2204 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 30 D1 A 93 A 93 A 93

ISO turning
A1
DTGN...-P
Walter Turn
91°
TN . .
h DTGNR/L2020X16-P 16 20 20 5 25 115 38,5 -6° -6°
b TN .. 1604 ..
DTGNR/L2525X16-P 16 25 25 32 130 38,5 -6° -6°
M6
l1
b1
l4
h1 f
Measured with master insert: TN .. 160408

Ordering example, right-hand tool: DTGNR2020X16-P/ordering example, left-hand tool: DTGNL2020X16-P
Assembly parts
Type TN .. 1604 ..
Shim AP321-TN16

Left clamp PK261L
Right clamp PK261R

G 1/8" screw FS2258 (SW 5)
Accessories
Type TN .. 1604 ..
Left-hand clamp set
PK261L SET
PK261R SET
A 30 D1 A 93 A 93 A 93

ISO turning
A1
PTGN
Walter Turn
91° TN . .
TN . .
b PTGNR/L1212F11 11 12 12 16 80 15,6 -6° -6°
TN .. 1103 ..
PTGNR/L1616H11 11 16 16 20 100 18 -6° -6°
PTGNR/L1616H16 16 16 16 20 100 20,2 -6° -6°
PTGNR/L2020K16 16 20 20 25 125 20,2 -6° -6°
l1 TN .. 1604 ..
PTGNR/L2525M16 16 25 25 32 150 22,2 -6° -6°
h PTGNR/L3225P16 16 32 25 32 170 22,2 -6° -6°

PTGNR/L3232P22 22 32 32 40 170 28,7 -6° -6° TN .. 2204 ..
l4
h1 91˚
PTGNR/L4040S27 27 40 40 50 250 34 -6° -6° TN .. 2706 ..
f
Measured with master insert: TN .. 110304 / TN .. 160408 / TN .. 220408 / TN .. 270612

Ordering example, right-hand tool: PTGNR1212F11/ordering example, left-hand tool: PTGNL1212F11
Assembly parts
Type TN .. 1103 .. TN .. 1604 .. TN .. 2204 .. TN .. 2706 ..
Shim AP137-TN1616 AP138-TN2216 AP193-TN2716
Clamping screw FS2182 (SW 2) FS351 (SW 2,5) FS352 (SW 3) FS2156 (SW 3)
Allen key ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3) ISO2936-3 (SW 3)
Accessories
Type TN .. 1604 .. TN .. 2204 ..
A 30 D1 A 93 A 93

ISO turning
A1
PTFN
Walter Turn
91°
TN . . TN . .
b PTFNR/L1212F11 11 12 12 16 80 15 -6° -6° TN .. 1103 ..
PTFNR/L1616H16 16 16 16 20 100 19,7 -6° -6°
PTFNR/L2020K16 16 20 20 25 125 20,2 -6° -6°
TN .. 1604 ..
PTFNR/L2525M16 16 25 25 32 150 20,2 -6° -6°
l1
PTFNR/L3225P16 16 32 25 32 170 20 -6° -6°
h
l4
91˚
h1 f

Ordering example, right-hand tool: PTFNR1212F11/ordering example, left-hand tool: PTFNL1212F11
Assembly parts
Type TN .. 1103 .. TN .. 1604 ..
Shim AP137-TN1616
Lever KN127 KN101
Clamping screw FS2182 (SW 2) FS351 (SW 2,5)

Shim pin RS101
Allen key ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5)
Accessories
Type TN .. 1604 ..
Shim AP137-TN1608
A 30 D1 A 93 A 93

ISO turning
A1
DVPN
Walter Turn
≤25°
117°30‘
VN . . VN . .
b DVPNR/L2525M16 16 25 25 32 150 39,2 -4° -13°
VN .. 1604 ..
DVPNR/L3225P16 16 32 25 32 170 39,2 -4° -13°
l1
117˚30’ l
4
h1 f
Measured with master insert: VN .. 160408

Ordering example, right-hand tool: DVPNR2525M16/ordering example, left-hand tool: DVPNL2525M16
Assembly parts
Type VN .. 1604 ..
Shim AP312-VN16

Clamp PK244

Pin RS117
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 93 A 93 A 93

ISO turning
A1
DVJN
Walter Turn
≤44°
93°
VN . . VN . .
b DVJNR/L2020K16 16 20 20 25 125 46,6 -4° -13°
DVJNR/L2525M16 16 25 25 32 150 46,6 -4° -13° VN .. 1604 ..
DVJNR/L3225P16 16 32 25 32 170 46,6 -4° -13°
l1
93˚ l4
h1 f

Ordering example, right-hand tool: DVJNR2020K16/ordering example, left-hand tool: DVJNL2020K16
Assembly parts
Type VN .. 1604 ..
Shim AP312-VN16

Clamp PK244

Pin RS117
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 93 A 93 A 93

ISO turning
A1
DVVN
Walter Turn
72°30‘ ≤70°
VN . . VN . .
b DVVNN2020K16 16 20 20 11 125 47,8 -4° -13°
DVVNN2525M16 16 25 25 13 150 47,8 -4° -13° VN .. 1604 ..
DVVNN3225P16 16 32 25 13 170 47,8 -4° -13°
l1
h
l4
72˚30' 72˚30'
h1 f

Assembly parts
Type VN .. 1604 ..
Shim AP312-VN16

Clamp PK244

Pin RS117
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 93 A 93 A 93

ISO turning
A1
DWLN
Walter Turn
95°
WN . . WN . .
b DWLNR/L1616H06 6 16 16 20 100 26,4 -6° -6°
DWLNR/L2020K06 6 20 20 25 125 27,1 -6° -6°
WN .. 0604 ..
DWLNR/L2525M06 6 25 25 32 150 27,1 -6° -6°
DWLNR/L3225P06 6 32 25 32 170 27,1 -6° -6°
l1 DWLNR/L2020K08 8 20 20 25 125 34,3 -6° -6°
h
DWLNR/L2525M08 8 25 25 32 150 35 -6° -6° WN .. 0804 ..
DWLNR/L3225P08 8 32 25 32 170 35 -6° -6°
95˚ l
4 DWLNR/L2525M10 10 25 25 32 150 40,3 -6° -6°
h1 f DWLNR/L3225P10 10 32 25 32 170 40,3 -6° -6° WN .. 1006 ..
DWLNR/L3232P10 10 32 32 40 170 41,8 -6° -6°
Measured with master insert: WN .. 060408 / WN .. 080408 / WN .. 100612
Ordering example, right-hand tool: DWLNR1616H06/ordering example, left-hand tool: DWLNL1616H06
Assembly parts
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Shim AP306-WN06 AP307-WN08 AP311-WN10
Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP / SW 3,5) FS1464 (Torx 20IP)
Accessories
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 34 D1 A 93 A 93 A 93

ISO turning
A1
DWLN...-P
Walter Turn
95°
WN . .
h DWLNR/L2020X08-P 8 20 20 10 25 115 38,5 -6° -6°
b WN .. 0804 ..
DWLNR/L2525X08-P 8 25 25 0 32 130 38,5 -6° -6°
M6
l1
b1
l4
h1 f
Measured with master insert: WN .. 080408

Ordering example, right-hand tool: DWLNR2020X08-P/ordering example, left-hand tool: DWLNL2020X08-P
Assembly parts
Type WN .. 0804 ..
Shim AP307-WN08

Left clamp PK266L
Right clamp PK266R

G 1/8" screw FS2258 (SW 5)
Accessories
Type WN .. 0804 ..
Left-hand clamp set
PK266L SET
PK266R SET
A 34 D1 A 93 A 93 A 93

ISO turning
A1
PWLN
Walter Turn
95°
WN . . WN . .
b PWLNR/L1616H06 6 16 16 20 100 18,5 -6° -6°
PWLNR/L2020K06 6 20 20 25 125 18,5 -6° -6° WN .. 0604 ..
PWLNR/L2525M06 6 25 25 32 150 18,5 -6° -6°
PWLNR/L2020K08 8 20 20 25 125 22 -6° -6°
l1 PWLNR/L2525M08 8 25 25 32 150 22 -6° -6° WN .. 0804 ..
PWLNR/L3225P08 8 32 25 32 170 22 -6° -6°
h
PWLNR/L2525M10 10 25 25 32 150 22 -6° -6°
WN .. 1006 ..
l4 PWLNR/L3225P10 10 32 25 32 170 22 -6° -6°
95˚
h1 f

Ordering example, right-hand tool: PWLNR1616H06/ordering example, left-hand tool: PWLNL1616H06
Assembly parts
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Clamping screw FS351 (SW 2,5) FS352 (SW 3) FS354 (SW 3)

Allen key ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3) ISO2936-3 (SW 3)
Accessories
Type WN .. 0804 ..
Shim AP170-WN0808
A 34 D1 A 93 A 93

ISO turning
A1
Shank tool – Screw clamping
SCLC
Walter Turn
7°
95°
CC . .
b SCLCR/L1010E06 6 10 10 12 70 11 0° 0°
SCLCR/L1212F06 6 12 12 16 80 10 0° 0°
CC .. 0602 ..
SCLCR/L1616H06 6 16 16 20 100 12 0° 0°
SCLCR/L2020K06 6 20 20 25 125 12 0° 0°
l1
SCLCR/L1212F09 9 12 12 16 80 15,6 0° 0°
h SCLCR/L1616H09 9 16 16 20 100 16,8 0° 0°
CC .. 09T3 ..
95˚ l4
SCLCR/L2020K09 9 20 20 25 125 17,8 0° 0°
SCLCR/L2525M09 9 25 25 32 150 17 0° 0°
h1 f
SCLCR/L2020K12 12 20 20 25 125 21,7 0° 0°
CC .. 1204 ..
SCLCR/L2525M12 12 25 25 32 150 23,7 0° 0°
Measured with master insert: CC .. 060204 / CC .. 09T308 / CC .. 120408
Ordering example, right-hand tool: SCLCR1010E06/ordering example, left-hand tool: SCLCL1010E06
Assembly parts Type CC .. 0602 .. CC .. 09T3 .. CC .. 09T3 .. CC .. 1204 ..

h = h1 [mm] 10–20 12 16–25 20–25
Clamping screw for indexable insert FS2061 (Torx 7IP) FS2063 (Torx 15IP) FS2060 (Torx 15IP) FS2065 (Torx 15IP)
Shim AP313-CC0908 AP314-CC1212
Screw for shim FS2068 (SW 3,5) FS2069 (SW 4)
FS1465 (Torx 15IP / FS1465 (Torx 15IP / FS1496 (Torx 15IP /

Torx key FS1490 (Torx 7IP)
SW 3,5) SW 3,5) SW 4)
A 37 D1 A 238 A 261

ISO turning
A1
SDHC
Walter Turn ≤12°30‘
7°
107°30‘
DC . .
b SDHCR/L1212F07 7 12 12 16 80 14,3 0° 0° DC .. 0702 ..
SDHCR/L1616H11 11 12 12 20 100 17,9 0° 0°
SDHCR/L2020K11 11 20 20 25 125 17,9 0° 0° DC .. 11T3 ..
SDHCR/L2525M11 11 25 25 32 150 20 0° 0°
l1
l4 107˚30`
h1 f
Measured with master insert: DC .. 070204 / DC .. 11T308

Ordering example, right-hand tool: SDHCR1212F07/ordering example, left-hand tool: SDHCL1212F07
Assembly parts
Type DC .. 0702 .. DC .. 11T3 ..
Clamping screw for indexable insert FS2061 (Torx 7IP) FS2060 (Torx 15IP)
Shim AP315-DC1108
Screw for shim FS2068 (SW 3,5)
Accessories
Type DC .. 11T3 ..
Shim AP329-DC1112
A 42 D1 A 238 A 261

ISO turning
A1
SDJC
Walter Turn
≤30°
7°
93°
DC . .
b SDJCR/L1010E07 7 10 10 12 70 15,7 0° 0°
DC .. 0702 ..
SDJCR/L1212F07 7 12 12 16 80 15,5 0° 0°
SDJCR/L1616H11 11 16 16 20 100 20,3 0° 0°
SDJCR/L2020K11 11 20 20 25 125 21,9 0° 0° DC .. 11T3 ..
l1
SDJCR/L2525M11 11 25 25 32 150 24,4 0° 0°
h
93˚ l4
h1 f

Ordering example, right-hand tool: SDJCR1010E07/ordering example, left-hand tool: SDJCL1010E07
Assembly parts
Type DC .. 0702 .. DC .. 11T3 ..
Shim AP315-DC1108
Accessories
Type DC .. 11T3 ..
Shim AP329-DC1112
A 42 D1 A 238 A 261

ISO turning
A1
SDNC
Walter Turn
7°
62°30‘ ≤60°
DC . .
b SDNCN1010E07 7 10 10 5 70 14,5 0° 0°
DC .. 0702 ..
SDNCN1212F07 7 12 12 6 80 14,5 0° 0°
SDNCN1616H11 11 16 16 9 100 21,9 0° 0°
SDNCN2020K11 11 20 20 11 125 21,9 0° 0° DC .. 11T3 ..
l1 SDNCN2525M11 11 25 25 13 150 22,2 0° 0°
62˚30' 62˚30' l4
h1 f

Assembly parts
Type DC .. 0702 .. DC .. 11T3 ..
Shim AP315-DC1108
Accessories
Type DC .. 11T3 ..
Shim AP329-DC1112
A 42 D1 A 238 A 261

ISO turning
A1
SRDC
Walter Turn
7°
90°
RC . T
b SRDCN1212F06 6 12 12 6 80 12 0° 0°
SRDCN2020K06 6 20 20 10 125 24 0° 0° RC . T0602M0 ..
SRDCN2525M06 6 25 25 12,5 150 25 0° 0°
SRDCN1616H08 8 16 16 8 100 16 0° 0°
l1 SRDCN2020K08 8 20 20 10 125 24 0° 0° RC . T0803M0 ..
SRDCN2525M08 8 25 25 12,5 150 25 0° 0°
h
SRDCN2020K10 10 20 20 10 125 25 0° 0°
RC . T10T3M0 ..
l4 SRDCN2525M10 10 25 25 12,5 150 25 0° 0°
h1 f SRDCN2020K12 12 20 20 10 125 25 0° 0°
SRDCN2525M12 12 25 25 12,5 150 28 0° 0° RC . T1204M0 ..
SRDCN3225P12 12 32 25 12,5 170 28 0° 0°
SRDCN3225P16 16 32 25 12,5 170 35 0° 0° RC . T1606M0 ..
Measured with master insert: RC . T0602M0 / RC . T0803M0 / RC . T10T3M0 / RC . T1204M0 / RC . T1606M0
Assembly parts
Type RC . T0602M0 .. RC . T0803M0 .. RC . T10T3M0 .. RC . T1204M0 .. RC . T1606M0 ..
FS2061 FS1462 FS2063 FS2060 FS2090
Clamping screw for indexable insert
Tightening torque
0,9 Nm 1,5 Nm 3,0 Nm 3,0 Nm 6,4 Nm
Shim AP324-RC10T3 AP325-RC1204 AP326-RC1606
Screw for shim FS2068 (SW 3,5) FS2068 (SW 3,5) FS2091 (SW 5)
FS1465 FS1465
FS1490 FS1466 FS1464
SW 3,5) SW 3,5)
A 46 D1 A 238 A 261

ISO turning
A1
PRDC
Walter Turn
7° 7°
90°
RC . T RC . X
b PRDCN2020K10 10 20 20 10 125 25 0° 0°
RC .. 10T3M0 ..
PRDCN2525M10 10 25 25 12,5 150 25 0° 0°
PRDCN2525M12 12 25 25 12,5 150 28 0° 0°
RC .. 1204M0 ..
PRDCN3225P12 12 32 25 12,5 170 28 0° 0°
l1 PRDCN3225P16 16 32 25 12,5 170 35 0° 0° RC .. 1605M0 ..
PRDCN3232P20 20 32 32 16 170 40 0° 0° RC .. 2006M0 ..
h
PRDCN4040S25 25 40 40 20 250 50 0° 0° RC .. 2507M0 ..
l4 PRDCN5050U32 32 50 50 25 350 55 0° 0° RC .. 3209M0 ..
h1 f
Measured with master insert: RC .. 10T3M0 / RC .. 1204M0 / RC .. 1605M0 / RC .. 2006M0 / RC .. 2507M0 / RC .. 3209M0
Assembly
parts Type RC .. 10T3M0 .. RC .. 1204M0 .. RC .. 1605M0 .. RC .. 2006M0 .. RC .. 2507M0 .. RC .. 3209M0 ..
Shim AP407-RC10T3 AP402-RC1204 AP403-RC1605 AP404-RC2006 AP405-RC2507 AP406-RC3209
Clamping screw FS2155 (SW 2) FS351 (SW 2,5) FS344 (SW 2,5) FS2156 (SW 3) FS2145 (SW 4) FS357 (SW 5)
Tapered assembly pin MD101 MD101 MD101 MD102 MD102 MD103
ISO2936-2,5 ISO2936-2,5
(SW 2,5) (SW 2,5)
Accessories
Type RC .. 10T3M0 .. RC .. 1605M0 ..
Shim for RC .. 1003 .. AP401-RC1003
Shim for RC .. 1606 .. AP403-RC1606
A 46 D1 A 238 A 261

ISO turning
A1
SRSC
Walter Turn
7°
≤27°
RC . T
b SRSCR/L2020K06 6 20 20 25 125 20 0° 0°
RC . T0602M0 ..
SRSCR/L2525M06 6 25 25 32 150 20 0° 0°
SRSCR/L2020K08 8 20 20 25 125 20 0° 0°
RC . T0803M0 ..
SRSCR/L2525M08 8 25 25 32 150 20 0° 0°
l1
SRSCR/L2020K10 10 20 20 25 125 20 0° 0°
RC . T10T3M0 ..
h SRSCR/L2525M10 10 25 25 32 150 28 0° 0°
SRSCR/L2020K12 12 20 20 25 125 22 0° 0°
l4
SRSCR/L2525M12 12 25 25 32 150 28 0° 0° RC . T1204M0 ..
h1 f
SRSCR/L3225P12 12 32 25 32 170 32 0° 0°
SRSCR/L3225P16 16 32 25 32 170 32 0° 0° RC . T1606M0 ..
Ordering example, right-hand tool: SRSCR2020K06/ordering example, left-hand tool: SRSCL2020K06
Assembly parts
Type RC . T0602M0 .. RC . T0803M0 .. RC . T10T3M0 .. RC . T1204M0 .. RC . T1606M0 ..
FS2061 FS1462 FS2063 FS2060 FS2090
Tightening torque
0,9 Nm 1,5 Nm 3,0 Nm 3,0 Nm 6,4 Nm
Shim AP324-RC10T3 AP325-RC1204 AP326-RC1606
Screw for shim FS2068 (SW 3,5) FS2068 (SW 3,5) FS2091 (SW 5)
FS1465 FS1465
FS1490 FS1466 FS1464
SW 3,5) SW 3,5)
A 46 D1 A 238 A 261

ISO turning
A1
PRGC
Walter Turn
7° 7°
≤27°
RC . T RC . X
b PRGCL2020K10 10 20 20 25 125 20,8 0° 0°
RC .. 10T3M0 ..
PRGCR/L2525M10 10 25 25 32 150 27,2 0° 0°
PRGCR/L2525M12 12 25 25 32 150 27,2 0° 0°
RC .. 1204M0 ..
PRGCR/L3225P12 12 32 25 32 170 32 0° 0°
l1
PRGCR/L3225P16 16 32 25 32 170 33,2 0° 0° RC .. 1605M0 ..
h PRGCR/L3232P20 20 32 32 40 170 38 0° 0° RC .. 2006M0 ..
PRGCR/L4040S25 25 40 40 50 250 50,5 0° 0° RC .. 2507M0 ..
l4
h1 f
Measured with master insert: RC .. 10T3M0 / RC .. 1204M0 / RC .. 1605M0 / RC .. 2006M0 / RC .. 2507M0

Ordering example, right-hand tool: PRGCR2525M10/ordering example, left-hand tool: PRGCL2525M10
Assembly parts
Type RC .. 10T3M0 .. RC .. 1204M0 .. RC .. 1605M0 .. RC .. 2006M0 .. RC .. 2507M0 ..
Shim AP407-RC10T3 AP402-RC1204 AP403-RC1605 AP404-RC2006 AP405-RC2507
Lever KN122 KN123 KN111 KN112 KN113
Clamping screw FS2155 (SW 2) FS351 (SW 2,5) FS344 (SW 2,5) FS2156 (SW 3) FS2145 (SW 4)
Tightening torque 0,6 Nm 2,0 Nm 2,5 Nm 5,0 Nm 10,0 Nm
ISO2936-2 ISO2936-2,5 ISO2936-2,5 ISO2936-3 ISO2936-4

Allen key
(SW 2) (SW 2,5) (SW 2,5) (SW 3) (SW 4)
Accessories
Type RC .. 10T3M0 .. RC .. 1605M0 ..
Shim for RC .. 1003 .. AP401-RC1003
Shim for RC .. 1606 .. AP403-RC1606
A 46 D1 A 238 A 261

ISO turning
A1
SSBC
Walter Turn
7°
75°
SC . .
b SSRCR/L1212F09 9 12 12 14 80 15,5 0° 0°
SC .. 09T3 ..
SSBCR/L1616H09 9 16 16 13 100 15,3 0° 0°
SSBCR/L2020K12 12 20 20 17 125 20,1 0° 0°
SC .. 1204 ..
SSBCR/L2525M12 12 25 25 22 150 20,1 0° 0°
l1
75˚ l
4
h1 f
Measured with master insert: SC .. 09T308 / SC .. 120408

Ordering example, right-hand tool: SSRCR1212F09/ordering example, left-hand tool: SSRCL1212F09
Assembly parts Type SC .. 09T3 .. SC .. 09T3 .. SC .. 1204 ..

h = h1 [mm] 12 16 20–25
Clamping screw for indexable insert FS2063 (Torx 15IP) FS2060 (Torx 15IP) FS2065 (Torx 15IP)
Shim AP328-SC0908 AP319-SC1212
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5) FS1496 (Torx 15IP / SW 4)
A 48 D1 A 238 A 261

ISO turning
A1
SSDC
Walter Turn
7°
45°
SC . .
b SSDCR/L1616H09 9 16 16 17 10,92 93,9 9,1 100,0 0° 0°
SC .. 09T3 ..
SSDCR/L2020K09 9 20 20 22 15,92 118,9 12 125,0 0° 0°
SSDCR/L2020K12 12 20 20 22 13,68 116,7 13,7 125,0 0° 0°
SC .. 1204 ..
SSDCR/L2525M12 12 25 25 27 18,68 141,7 13,7 150,0 0° 0°
l1 l
20
45˚ l4
f1
h1 f

Ordering example, right-hand tool: SSDCR1616H09/ordering example, left-hand tool: SSDCL1616H09
Assembly parts
Type SC .. 09T3 .. SC .. 1204 ..
Torx key FS1465 (Torx 15IP / SW 3,5) FS1496 (Torx 15IP / SW 4)
A 48 D1 A 238 A 261

ISO turning
A1
SSDCN
Walter Turn
7°
45°
SC . .
b SSDCN1212F09 9 12 12 6 80 15,1 0° 0°
SC .. 09T3 ..
SSDCN1616H09 9 16 16 8 100 15,1 0° 0°
SSDCN2020K12 12 20 20 10 125 22 0° 0°
SC .. 1204 ..
SSDCN2525M12 12 25 25 13 150 22 0° 0°
l1
45˚ l4
h1 f

Assembly parts Type SC .. 09T3 .. SC .. 09T3 .. SC .. 1204 ..

h = h1 [mm] 12 16 20–25
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5) FS1496 (Torx 15IP / SW 4)
A 48 D1 A 238 A 261

ISO turning
A1
STGC
Walter Turn
7°
91°
TC . .
b STGCR/L1212F11 11 12 12 16 80 14,1 0° 0° TC .. 1102 ..
STGCR/L1616H16 16 16 16 20 100 20,1 0° 0°
STGCR/L2020K16 16 20 20 25 125 20,4 0° 0° TC .. 16T3 ..
STGCR/L2525M16 16 25 25 32 150 20,9 0° 0°
l1
91˚ l
4
h1 f
Measured with master insert: TC .. 110204 / TC .. 16T308

Ordering example, right-hand tool: STGCR1212F11/ordering example, left-hand tool: STGCL1212F11
Assembly parts
Type TC .. 1102 .. TC .. 16T3 ..
Shim AP317-TC1612
A 51 D1 A 238 A 261

ISO turning
A1
SVHB
Walter Turn
5° 7°
≤35°
107°30‘
VB . . VC . .
b SVHBR/L1616H11 11 16 16 20 100 18 0° 0°
VB .. 1103 ..
SVHBR/L2020K11 11 20 20 25 125 19 0° 0°
VC .. 1103 ..
SVHBR/L2525M11 11 25 25 32 150 27 0° 0°
SVHBR/L2020K16 16 20 20 25 125 27,6 0° 0°
l1 VB .. 1604 ..
SVHBR/L2525M16 16 25 25 32 150 27,6 0° 0°
VC .. 1604 ..
h SVHBR/L3225P16 16 32 25 32 170 27,6 0° 0°
107˚30' l4
h1 f
Measured with master insert: VB .. 110304 / VB .. 160408

Ordering example, right-hand tool: SVHBR1616H11/ordering example, left-hand tool: SVHBL1616H11
Assembly parts VB .. 1103 .. VB .. 1604 ..

Type VC .. 1103 .. VC .. 1604 ..
Shim AP316-VB1608
Accessories VB .. 1604 ..
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
PVHB
Walter Turn
5° 7°
≤35°
107°30‘
VB . . VC . .
b PVHBR/L1616H11 11 16 16 20 100 25 0° 0°
VB .. 1103 ..
PVHBR/L2020K11 11 20 20 25 125 25 0° 0°
VC .. 1103 ..
PVHBR/L2525M11 11 25 25 32 150 32 0° 0°
PVHBR/L2020K16 16 20 20 25 125 28 0° 0°
l1 VB .. 1604 ..
PVHBR/L2525M16 16 25 25 32 150 28 0° 0°
VC .. 1604 ..
h PVHBR/L3225P16 16 32 25 32 170 28 0° 0°
l4
h1 f 107˚30'

Ordering example, right-hand tool: PVHBR1616H11/ordering example, left-hand tool: PVHBL1616H11

Type VC .. 1103 .. VC .. 1604 ..
Shim AP153
Shim pin RS101
Lever KN118 KN110

Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
SVJB
Walter Turn
5° 7°
≤50°
93°
VB . . VC . .
b SVJBR/L1212F11 11 12 12 16 80 20,6 0° 0°
SVJBR/L1616H11 11 16 16 20 100 21,2 0° 0° VB .. 1103 ..
SVJBR/L2020K11 11 20 20 25 125 21,2 0° 0° VC .. 1103 ..
SVJBR/L2525M11 11 25 25 32 150 21,2 0° 0°

l1
SVJBR/L1616H16 16 16 16 20 100 27 0° 0°
h SVJBR/L2020K16 16 20 20 25 125 31,1 0° 0° VB .. 1604 ..
93˚ l4 SVJBR/L2525M16 16 25 25 32 150 31,5 0° 0° VC .. 1604 ..
h1 f SVJBR/L3225P16 16 32 25 32 170 31,5 0° 0°

Ordering example, right-hand tool: SVJBR1212F11/ordering example, left-hand tool: SVJBL1212F11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

Assembly parts Type VC .. 1103 .. VC .. 1604 .. VC .. 1604 ..
h = h1 [mm] 12–25 16 20–32
Shim AP316-VB1608
Torx key FS1490 (Torx 7IP) FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5)
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
PVJB
Walter Turn
5° 7°
≤50°
93°
VB . . VC . .
b PVJBR/L1616H11 11 16 16 20 100 25 0° 0°
VB .. 1103 ..
PVJBR/L2020K11 11 20 20 25 125 25 0° 0°
VC .. 1103 ..
PVJBR/L2525M11 11 25 25 32 150 32 0° 0°
PVJBR/L1616H16 16 16 16 20 100 32 0° 0°
l1 PVJBR/L2020K16 16 20 20 25 125 34 0° 0° VB .. 1604 ..
h PVJBR/L2525M16 16 25 25 32 150 38 0° 0° VC .. 1604 ..
93˚ l4 PVJBR/L3225P16 16 32 25 32 170 38 0° 0°
h1 f

Ordering example, right-hand tool: PVJBR1616H11/ordering example, left-hand tool: PVJBL1616H11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

h = h1 [mm] 16–25 16 20–32
Shim AP153 AP153
Clamping screw FS347 (SW 2) FS332 (SW 2,5) FS351 (SW 2,5)
Allen key ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5) ISO2936-2,5 (SW 2,5)
Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
SVVB
Walter Turn
5° 7°
72°30‘ ≤70°
VB . . VC . .
b SVVBN1212F11 11 12 12 6 80 21,1 0° 0°
SVVBN1616H11 11 16 16 8 100 21,1 0° 0° VB .. 1103 ..
SVVBN2020K11 11 20 20 10 125 21,1 0° 0° VC .. 1103 ..
SVVBN2525M11 11 25 25 13 150 21,1 0° 0°

l1 SVVBN2020K16 16 20 20 11 125 31,5 0° 0°
VB .. 1604 ..
SVVBN2525M16 16 25 25 13 150 31,5 0° 0°
h VC .. 1604 ..
SVVBN3225P16 16 32 25 13 170 31,5 0° 0°
72˚30' 72˚30' l4
h1 f


Type VC .. 1103 .. VC .. 1604 ..
Shim AP316-VB1608
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
PVVB
Walter Turn
5° 7°
72°30‘ ≤70°
VB . . VC . .
b PVVBN1616H11 11 16 16 8 100 25 0° 0°
VB .. 1103 ..
PVVBN2020K11 11 20 20 10 125 25 0° 0°
VC .. 1103 ..
PVVBN2525M11 11 25 25 13 150 25 0° 0°
PVVBN2020K16 16 20 20 10 125 34 0° 0°
l1 VB .. 1604 ..
PVVBN2525M16 16 25 25 13 150 34 0° 0°
VC .. 1604 ..
PVVBN3225P16 16 32 25 13 170 34 0° 0°
h
72˚30' 72˚30'
l4
h1 f


Type VC .. 1103 .. VC .. 1604 ..
Shim AP153
Lever KN118 KN110

Shim pin RS101
Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
SWLC
Walter Turn
7°
95°
WC . .
b SWLCR/L1212F04 4 12 12 16 80 11 0° 0°
WC .. 0402 ..
SWLCR/L1616H04 4 16 16 20 100 11 0° 0°
SWLCR/L1616H06 6 16 16 20 100 15 0° 0°
SWLCR/L2020K06 6 20 20 25 125 15 0° 0° WC .. 06T3 ..
h1
SWLCR/L2525M06 6 25 25 32 150 17 0° 0°
h
SWLCR/L2020K08 8 20 20 25 125 20 0° 0°
95˚ l
WC .. 0804 ..
4 SWLCR/L2525M08 8 25 25 32 150 21 0° 0°
h1 f
Measured with master insert: WC .. 040204 / WC .. 06T308 / WC .. 080408

Ordering example, right-hand tool: SWLCR1212F04/ordering example, left-hand tool: SWLCL1212F04
Assembly parts
Type WC .. 0402 .. WC .. 06T3 .. WC .. 0804 ..
Shim AP318-WC0608 AP320-WC0812
Torx key FS1490 (Torx 7IP) FS1465 (Torx 15IP / SW 3,5) FS1496 (Torx 15IP / SW 4)
A 58 D1 A 238 A 261

ISO turning
A1
CRSN
Walter Turn
– For ceramic indexable inserts
– Rigid clamping with carbide shoe
15°
RN . .
b CRSNR/L2525M12-ID 12 25 25 32 150 28 -6° -6°
RN .. 1207 ..
CRSNR/L3225P12-ID 12 32 25 32 170 28 -6° -6°
CRSNR/L3232P15-ID 15 32 32 40 170 30 -6° -6° RN .. 1507 ..
CRSNR/L3232P19-ID 19 32 32 40 170 32 -6° -6° RN .. 1907 ..
l1
l4
h1 f
Measured with master insert: RN .. 120700 / RN .. 150700 / RN .. 190700

Ordering example, right-hand tool: CRSNR2525M12-ID/ordering example, left-hand tool: CRSNL2525M12-ID
Assembly parts
Type RN .. 1207 .. RN .. 1507 .. RN .. 1907 ..
Shim AP418-RN1207 AP419-RN1507 AP420-RN1907
Screw for shim FS2241 (Torx 20) FS2242 (SW 2) FS2243 (SW 2,5)
Clamp with screw PK258 SET (SW 4) PK258 SET (SW 4) PK258 SET (SW 4)
Carbide clamping plate FK380 FK380 FK380
Allen key for clamp ISO2936-4 (SW 4) ISO2936-4 (SW 4) ISO2936-4 (SW 4)
Allen key for shim FS256 (Torx 20) ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5)
A 74 D1 A 242 A 261 A 262

ISO turning
A1
CRDN
Walter Turn
90°
RN . .
b CRDNN2525M12-ID 12 25 25 19 150 32 -8° 0°
RN .. 1207 ..
CRDNN3225P12-ID 12 32 25 19 170 32 -8° 0°
l1
l4
h1 f
Measured with master insert: RN .. 120700

Assembly parts
Type RN .. 1207 ..
Shim AP418-RN1207
Screw for shim FS2241 (Torx 20)

Clamp with screw PK258 SET (SW 4)
Carbide clamping plate FK380
Allen key for clamp ISO2936-4 (SW 4)
Allen key for shim FS256 (Torx 20)
A 74 D1 A 242 A 261 A 262

ISO turning
A1
CRDC
Walter Turn
7° 11°
90°
RC . X RP . X
b RC . X0907 ..
CRDCN3225P09-A 9 32 25 17 170 31 0° 0°
RP . X0907 ..
RC . X1207 ..
CRDCN3225P12-A 12 32 25 19 170 40 0° 0°
RP . X1207 ..
l1
l4
h1 f
Measured with master insert: RC . X090700 / RC . X120700

Assembly parts RC . X0907 .. RC . X1207 ..

Type RP . X0907 .. RP . X1207 ..
Shim AP416-RC0907 AP417-RC1207
Clamping sleeve RS121 RS122
Clamp with screw PK257 SET (SW 4) PK257 SET (SW 4)
Clamp screw FS2240 (SW 4) FS2240 (SW 4)

Allen key for clamp ISO2936-4 (SW 4) ISO2936-4 (SW 4)
A 76 D1 A 242 A 261 A 262

ISO turning
A1
Turning toolholders – Rigid clamping
C...-DCLN
Walter Turn
– Walter Capto™
95° CN . . CN . .
Tool f l4 Dmin Dmin2

Designation d1 mm mm mm mm γ λs Type
Walter Capto™ in accordance with ISO 26623 C4-DCLNR/L-27050-12 12 C4 27 50 110 140 -6° -6°
d1 C5-DCLNR/L-35060-12 12 C5 35 60 110 165 -6° -6°

CN .. 1204 ..
C6-DCLNR/L-45065-12 12 C6 45 65 110 190 -6° -6°
C8-DCLNR/L-55080-12 12 C8 55 80 110 250 -6° -6°
l4 C4-DCLNR/L-27055-16 16 C4 27 55 125 145 -6° -6°
95˚ C5-DCLNR/L-35060-16 16 C5 35 60 125 165 -6° -6° CN .. 1606 ..
f
C6-DCLNR/L-45065-16 16 C6 45 65 125 190 -6° -6°
C5-DCLNR/L-35060-19 19 C5 35 60 80 165 -6° -6°
C6-DCLNR/L-45065-19 19 C6 45 65 81 190 -6° -6° CN .. 1906 ..
C8-DCLNR/L-55080-19 19 C8 55 80 100 250 -6° -6°
For information on Dmin and Dmin2, see “Technical information – ISO turning”
Ordering example, right-hand tool: C4-DCLNR-27050-12/ordering example, left-hand tool: C4-DCLNL-27050-12
Assembly parts
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Cooling lubricant nozzle FS1475 FS1475 FS1475
Accessories
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for CN .. 1207 .. AP411-CN1207
A 20 D1 A 234 A 261 A 262

ISO turning
A1
C...-DCLN...-P
Walter Turn
– Walter Capto™
95° CN . .
Tool f l4
Designation d1 mm mm γ λs Type
Walter Capto™ in accordance with ISO 26623 C4-DCLNR/L-27050-12-P 12 C4 27 50 -6° -6°
d1 C5-DCLNR/L-35060-12-P 12 C5 35 60 -6° -6° CN .. 1204 ..

C6-DCLNR/L-45065-12-P 12 C6 45 65 -6° -6°
l4

Ordering example, right-hand tool: C4-DCLNR-27050-12-P/ordering example, left-hand tool: C4-DCLNL-27050-12-P
Assembly parts
Type CN .. 1204 ..
Shim AP301-CN12

Clamp PK255

Accessories
Type CN .. 1204 ..
Clamp set
PK255 SET
A 20 D1 A 234 A 261 A 262

ISO turning
A1
Turning toolholders – Lever clamp
C...-PCLN
Walter Turn
– Walter Capto™
95° CN . . CN . .

Walter Capto™ in accordance with ISO 26623 C3-PCLNR/L-22040-12 12 C3 22 40 60 116 -6° -6°
d1 C4-PCLNR/L-27050-12 12 C4 27 50 60 140 -6° -6°

C5-PCLNR/L-35060-12 12 C5 35 60 65 165 -6° -6° CN .. 1204 ..
C6-PCLNR/L-45065-12 12 C6 45 65 81 190 -6° -6°
95˚ l4 C8-PCLNR/L-55080-12 12 C8 55 80 100 250 -6° -6°

C4-PCLNR/L-27050-16 16 C4 27 50 80 140 -6° -6°
f
C5-PCLNR/L-35060-16 16 C5 35 60 80 165 -6° -6°
CN .. 1606 ..
C6-PCLNR/L-45065-16 16 C6 45 65 81 190 -6° -6°
C8-PCLNR/L-55080-16 16 C8 55 80 100 250 -6° -6°
C5-PCLNR/L-35060-19 19 C5 35 60 80 165 -6° -6°
C6-PCLNR/L-45065-19 19 C6 45 65 81 190 -6° -6° CN .. 1906 ..
C8-PCLNR/L-55080-19 19 C8 55 80 100 250 -6° -6°
C8-PCLNR/L-55080-25 25 C8 55 80 150 250 -6° -6° CN .. 2509 ..
Measured with master insert: CN .. 120408 / CN .. 160612 / CN .. 190612 / CN .. 250924
Ordering example, right-hand tool: C3-PCLNR-22040-12/ordering example, left-hand tool: C3-PCLNL-22040-12
Assembly parts Type CN .. 1204 .. CN .. 1204 .. CN .. 1204 .. CN .. 1606 .. CN .. 1606 .. CN .. 1606 .. CN .. 1906 .. CN .. 1906 .. CN .. 2509 ..
d1 C3/C4 C5/C6 C8 C4 C5/C6 C8 C5/C6 C8 C8
AP134- AP134- AP134- AP135- AP135- AP135- AP136- AP136- AP192-
Shim
CN1216 CN1216 CN1216 CN1624 CN1624 CN1624 CN1924 CN1924 CN2524
for radius
r ≤ 1,6 mm r ≤ 1,6 mm r ≤ 1,6 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm
Lever KN102 KN102 KN102 KN104 KN104 KN104 KN106 KN106 KN107
FS352 FS352 FS352 FS354 FS354 FS354 FS356 FS356 FS357

Clamping screw
(SW 3) (SW 3) (SW 3) (SW 3) (SW 3) (SW 3) (SW 4) (SW 4) (SW 5)
Tightening torque
5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 10,0 Nm 10,0 Nm 14,0 Nm
Shim pin RS102 RS102 RS102 RS103 RS103 RS103 RS104 RS104 RS105
Tapered
MD101 MD101 MD101 MD102 MD102 MD102 MD102 MD102 MD103
assembly pin
Cooling
lubricant nozzle
ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-4 ISO2936-4 ISO2936-5
Allen key
(SW 3) (SW 3) (SW 3) (SW 3) (SW 3) (SW 3) (SW 4) (SW 4) (SW 5)
Accessories
Type CN .. 1204 .. CN .. 1606 .. CN .. 1906 ..
A 20 D1 A 234 A 261

ISO turning
A1
C...-DDJN
Walter Turn
– Walter Capto™
≤27°
93°
DN . . DN . .

Walter Capto™ in accordance with ISO 26623 C4-DDJNR/L-27050-11 11 C4 27 50 60 140 -6° -7°
d1 C5-DDJNR/L-35060-11 11 C5 35 60 65 165 -6° -7° DN .. 1104 ..

C6-DDJNR/L-45065-11 11 C6 45 65 81 190 -6° -7°
C4-DDJNR/L-27055-15 15 C4 27 55 110 145 -6° -7°
93˚ l4 C5-DDJNR/L-35060-15 15 C5 35 60 110 165 -6° -7°
DN .. 1506 ..
f
C6-DDJNR/L-45065-15 15 C6 45 65 110 190 -6° -7°
C8-DDJNR/L-55080-15 15 C8 55 80 110 250 -6° -7°

Ordering example, right-hand tool: C4-DDJNR-27050-11/ordering example, left-hand tool: C4-DDJNL-27050-11
Assembly parts Type DN .. 1104 .. DN .. 1104 .. DN .. 1506 .. DN .. 1506 .. DN .. 1506 .. DN .. 1506 ..

d1 C4 C5/C6 C4 C5 C6 C8
Shim AP305-DN11 AP305-DN11 AP304-DN15 AP304-DN15 AP304-DN15 AP304-DN15
FS1461 FS1461 FS1461 FS1461

(Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 15IP)
2,5 Nm 2,5 Nm 2,5 Nm 2,5 Nm
Clamp PK240 PK240 PK241 PK241 PK241 PK241
FS1473 FS1473 FS1473 FS1473

3,9 Nm 3,9 Nm 3,9 Nm 3,9 Nm
Pressure spring FS1469 FS1469 FS1470 FS1470 FS1470 FS1470
Pin RS116 RS116 RS117 RS117 RS117 RS117
Cooling
FS1477 FS1476 FS1477 FS1475 FS1476 FS1479
lubricant nozzle
FS1465 (Torx 15IP FS1465 (Torx 15IP FS1465 (Torx 15IP FS1465 (Torx 15IP
Torx key FS1466 (Torx 9IP) FS1466 (Torx 9IP)
/ SW 3,5) / SW 3,5) / SW 3,5) / SW 3,5)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 234 A 261 A 262

ISO turning
A1
C...-DDJN...-P
Walter Turn
– Walter Capto™
≤27°
93°
DN . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-DDJNR/L-27055-11-P 11 C4 27 55 -6° -7° DN .. 1104 ..
d1 C5-DDJNR/L-35060-15-P 15 C5 35 60 -6° -7°

DN .. 1506 ..
C6-DDJNR/L-45065-15-P 15 C6 45 65 -6° -7°
l4

Ordering example, right-hand tool: C4-DDJNR-27055-11-P/ordering example, left-hand tool: C4-DDJNL-27055-11-P
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..

Clamp PK255 PK256

Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK255 SET PK256 SET
A 24 D1 A 234 A 261 A 262

ISO turning
A1
C...-PDJN
Walter Turn
– Walter Capto™
≤27°
93°
DN . . DN . .

Walter Capto™ in accordance with ISO 26623 C3-PDJNR/L-22045-11 11 C3 22 45 80 116 -6° -7°
d1 C4-PDJNR/L-27050-11 11 C4 27 50 80 140 -6° -7° DN .. 1104 ..

C5-PDJNR/L-35060-11 11 C5 35 60 80 165 -6° -7°
C4-PDJNR/L-27050-15 15 C4 27 50 80 140 -6° -7°
93˚ l4 C5-PDJNR/L-35060-15 15 C5 35 60 80 165 -6° -7° DN .. 1506 ..
C6-PDJNR/L-45065-15 15 C6 45 65 80 190 -6° -7°
f

Ordering example, right-hand tool: C3-PDJNR-22045-11/ordering example, left-hand tool: C3-PDJNL-22045-11
Assembly parts Type DN .. 1104 .. DN .. 1104 .. DN .. 1506 .. DN .. 1506 ..

d1 C3/C4 C5 C4 C5/C6
Shim AP171-DN1112 AP171-DN1112 AP145-DN1516 AP145-DN1516
Clamping screw FS351 (SW 2,5) FS351 (SW 2,5) FS355 (SW 3) FS355 (SW 3)
Cooling lubricant nozzle FS1477 FS1476 FS1477 FS1476
Allen key ISO2936-2,5 (SW 2,5) ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3) ISO2936-3 (SW 3)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Shim for DN .. 1504 .. AP357-DN1508
Shim for DN .. 1504 .. AP357-DN1516
A 24 D1 A 234 A 261

ISO turning
A1
C...-DDUN
Walter Turn
– Walter Capto™
≤ 27° DN . .
DN . .

Walter Capto™ in accordance with ISO 26623 C4-DDUNR/L-27050-15 15 C4 27 50 110 140 -6° -7°
d1 C5-DDUNR/L-35060-15 15 C5 35 60 110 165 -6° -7°

DN .. 1506 ..
C6-DDUNR/L-45065-15 15 C6 45 65 110 190 -6° -7°
C8-DDUNR/L-55080-15 15 C8 55 80 110 250 -6° -7°
93˚ l4

Ordering example, right-hand tool: C4-DDUNR-27050-15/ordering example, left-hand tool: C4-DDUNL-27050-15
Assembly parts Type DN .. 1506 .. DN .. 1506 .. DN .. 1506 ..

d1 C4 C5/C6 C8
Shim AP304-DN15 AP304-DN15 AP304-DN15
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5)
Accessories
Type DN .. 1506 ..
Clamp set
PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 234 A 261 A 262

ISO turning
A1
C...-DSRN
Walter Turn
– Walter Capto™
75° SN . .
SN . .
Tool f l4 Dmin2
Designation d1 mm mm mm γ λs Type
Walter Capto™ in accordance with ISO 26623 C4-DSRNR/L-22050-12 12 C4 22 50 140 -6° -6°
d1 C5-DSRNR/L-27060-12 12 C5 27 60 165 -6° -6° SN .. 1204 ..

C6-DSRNR/L-35065-12 12 C6 35 65 190 -6° -6°
C5-DSRNR/L-27060-15 15 C5 27 60 165 -6° -6°
SN .. 1506 ..
75˚ l4 C6-DSRNR/L-35065-15 15 C6 35 65 190 -6° -6°
f C6-DSRNR/L-35065-19 19 C6 35 65 190 -6° -6°

SN .. 1906 ..
C8-DSRNR/L-45080-19 19 C8 45 80 250 -6° -6°
C8-DSRNR/L-45080-25 25 C8 45 80 250 -6° -6° SN .. 2507 ..

For information on Dmin2, see “Technical information – ISO turning”
Ordering example, right-hand tool: C4-DSRNR-22050-12/ordering example, left-hand tool: C4-DSRNL-22050-12
Assembly parts
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
FS1465 (Torx 15IP /

SW 3,5)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
Shim for SN .. 2509 .. AP351-SN2509
A 27 D1 A 234 A 261 A 262

ISO turning
A1
C...-PSRN
Walter Turn
– Walter Capto™
75° SN . .
SN . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C3-PSRNR/L-17040-12 12 C3 17 40 -6° -6°
d1 C4-PSRNR/L-22050-12 12 C4 22 50 -6° -6°

SN .. 1204 ..
C5-PSRNR/L-27060-12 12 C5 27 60 -6° -6°
C6-PSRNR/L-35065-12 12 C6 35 65 -6° -6°
75˚ l4
C5-PSRNR/L-27060-15 15 C5 27 60 -6° -6°
SN .. 1506 ..
f C6-PSRNR/L-35065-15 15 C6 35 65 -6° -6°
C5-PSRNR/L-27060-19 19 C5 27 60 -6° -6°
C6-PSRNR/L-35065-19 19 C6 35 65 -6° -6° SN .. 1906 ..
C8-PSRNR/L-45080-19 19 C8 45 80 -6° -6°
C8-PSRNR/L-45080-25 25 C8 45 80 -6° -6° SN .. 2507 ..
Ordering example, right-hand tool: C3-PSRNR-17040-12/ordering example, left-hand tool: C3-PSRNL-17040-12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 1906 .. SN .. 2507 ..

d1 C3/C4 C5/C6 C5/C6 C5/C6 C8 C8
Shim AP141-SN1216 AP141-SN1216 AP142-SN1524 AP143-SN1924 AP143-SN1924 AP144-SN2524
for radius r ≤ 1,6 mm r ≤ 1,6 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm r ≤ 2,4 mm
Clamping screw FS352 (SW 3) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4) FS356 (SW 4) FS357 (SW 5)
Tapered
MD101 MD101 MD102 MD102 MD102 MD103
assembly pin
Allen key ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-4 (SW 4) ISO2936-4 (SW 4) ISO2936-5 (SW 5)
Cooling
FS1477 FS1476 FS1476 FS1476 FS1479 FS1479
lubricant nozzle
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 2507 ..
Shim for SN .. 2509 .. AP191-SN250924
A 27 D1 A 234 A 261

ISO turning
A1
C...-DSKN
Walter Turn
– Walter Capto™
75°
SN . . SN . .
Tool f l4 Dmin
Walter Capto™ in accordance with ISO 26623 C4-DSKNR/L-27050-12 12 C4 27 50 110 -6° -6°
d1 C5-DSKNR/L-35060-12 12 C5 35 60 110 -6° -6° SN .. 1204 ..

C6-DSKNR/L-45065-12 12 C6 45 65 110 -6° -6°
C5-DSKNR/L-35060-15 15 C5 35 60 125 -6° -6°
SN .. 1506 ..
l4 C6-DSKNR/L-45065-15 15 C6 45 65 125 -6° -6°
C6-DSKNR/L-45065-19 19 C6 45 65 125 -6° -6°
75˚ SN .. 1906 ..
f C8-DSKNR/L-55080-19 19 C8 55 80 125 -6° -6°

Ordering example, right-hand tool: C4-DSKNR-27050-12/ordering example, left-hand tool: C4-DSKNL-27050-12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 1906 ..

d1 C4 C5/C6 C5/C6 C6 C8
FS1461 FS1461 FS1463 FS1463 FS1463

Screw for shim
Tightening torque
2,5 Nm 2,5 Nm 5,0 Nm 5,0 Nm 5,0 Nm
FS1473 FS1473 FS1474 FS1474 FS1474

Clamp screw
Tightening torque
3,9 Nm 3,9 Nm 6,4 Nm 6,4 Nm 6,4 Nm
Pin RS117 RS117 RS117 RS117 RS117
Cooling lubricant nozzle FS1477 FS1476 FS1476 FS1476 FS1479
FS1465 FS1465
FS1464 FS1464 FS1464
SW 3,5) SW 3,5)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 234 A 261 A 262

ISO turning
A1
C...-PSKN
Walter Turn
– Walter Capto™
75°
SN . . SN . .

Walter Capto™ in accordance with ISO 26623 C4-PSKNR/L-27050-12 12 C4 27 50 60 140 -6° -6°
SN .. 1204 ..
d1 C5-PSKNR/L-35060-12 12 C5 35 60 65 165 -6° -6°
C5-PSKNR/L-35060-15 15 C5 35 60 80 165 -6° -6°
SN .. 1506 ..
C6-PSKNR/L-45065-15 15 C6 45 65 81 190 -6° -6°
l4 C6-PSKNR/L-45065-19 19 C6 45 65 81 190 -6° -6°
SN .. 1906 ..
C8-PSKNR/L-55080-19 19 C8 55 80 100 250 -6° -6°
75˚
f

Ordering example, right-hand tool: C4-PSKNR-27050-12/ordering example, left-hand tool: C4-PSKNL-27050-12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 .. SN .. 1906 ..

d1 C4 C5 C5/C6 C6 C8
Clamping screw FS352 (SW 3) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4) FS356 (SW 4)
ISO2936-3 ISO2936-3 ISO2936-3 ISO2936-4 ISO2936-4

Allen key
(SW 3) (SW 3) (SW 3) (SW 4) (SW 4)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
A 27 D1 A 234 A 261

ISO turning
A1
C...-DSSN
Walter Turn
– Walter Capto™
45°
SN . . SN . .
Tool f f1 l4 l20 Dmin Dmin2

Designation d1 mm mm mm mm mm mm γ λs Type
Walter Capto™ in accordance with ISO 26623 C4-DSSNR/L-27042-12 12 C4 27 18,7 42 50,3 110 140 -8° 0°
d1 C5-DSSNR/L-35052-12 12 C5 35 26,7 52 60,3 110 165 -8° 0° SN .. 1204 ..

C6-DSSNR/L-45056-12 12 C6 45 36,7 56 64,3 110 190 -8° 0°
C4-DSSNR/L-27045-15 15 C4 27 16,8 45 55,2 125 145 -8° 0°
l4 l
20 C5-DSSNR/L-35050-15 15 C5 35 24,8 50 60,2 125 165 -8° 0° SN .. 1506 ..
C6-DSSNR/L-45054-15 15 C6 45 34,8 54 60,2 125 190 -8° 0°
45˚
f1
C6-DSSNR/L-45052-19 19 C6 45 32,5 52 64,5 125 190 -8° 0° SN .. 1906 ..
f

Ordering example, right-hand tool: C4-DSSNR-27042-12/ordering example, left-hand tool: C4-DSSNL-27042-12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1204 .. SN .. 1506 .. SN .. 1506 .. SN .. 1506 .. SN .. 1906 ..
d1 C4 C5 C6 C4 C5 C6 C6
Shim AP308-SN12 AP308-SN12 AP308-SN12 AP309-SN15 AP309-SN15 AP309-SN15 AP310-SN19
FS1461 FS1461 FS1461 FS1463 FS1463 FS1463 FS1463

Screw for shim
(Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 20IP) (Torx 20IP)
Tightening torque
2,5 Nm 2,5 Nm 2,5 Nm 5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm
Clamp PK241 PK241 PK241 PK242 PK242 PK242 PK243
FS1473 FS1473 FS1473 FS1474 FS1474 FS1474 FS1474

Clamp screw
(Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 20IP) (Torx 20IP)
Tightening torque
3,9 Nm 3,9 Nm 3,9 Nm 6,4 Nm 6,4 Nm 6,4 Nm 6,4 Nm
Pressure spring FS1470 FS1470 FS1470 FS1471 FS1471 FS1471 FS1471
Pin RS117 RS117 RS117 RS117 RS117 RS117 RS117
Cooling
FS1477 FS1476 FS1475 FS1477 FS1476 FS1475 FS1476
lubricant nozzle
FS1465 FS1465 FS1465
FS1464 FS1464 FS1464 FS1464
Torx key (Torx 15IP / (Torx 15IP / (Torx 15IP /
SW 3,5) SW 3,5) SW 3,5)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
A 27 D1 A 234 A 261 A 262

ISO turning
A1
C...-PSSN
Walter Turn
– Walter Capto™
45°
SN . . SN . .
Tool f f1 l4 l20 Dmin Dmin2

Designation d1 mm mm mm mm mm mm γ λs Type
Walter Capto™ in accordance with ISO 26623 C4-PSSNR/L-27042-12 12 C4 27 18,7 42 50,3 60 132 -8° 0°
d1 C5-PSSNR/L-35052-12 12 C5 35 26,7 52 60,3 65 157 -8° 0° SN .. 1204 ..

C6-PSSNR/L-45056-12 12 C6 45 36,7 56 64,3 81 181 -8° 0°
C6-PSSNR/L-45054-15 15 C6 45 34,8 54 64,2 100 179 -8° 0° SN .. 1506 ..
l4 l
20 C6-PSSNR/L-45052-19 19 C6 45 32,5 52 64,5 100 177 -8° 0° SN .. 1906 ..
45˚
f1
f

Ordering example, right-hand tool: C4-PSSNR-27042-12/ordering example, left-hand tool: C4-PSSNL-27042-12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..

d1 C4 C5/C6 C6 C6
Clamping screw FS352 (SW 3) FS352 (SW 3) FS354 (SW 3) FS356 (SW 4)
Accessories
Type SN .. 1204 .. SN .. 1506 .. SN .. 1906 ..
A 27 D1 A 234 A 261

ISO turning
A1
C...-DSDN
Walter Turn
– Walter Capto™
45° SN . . SN . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C4-DSDNN-00050-12 12 C4 0,3 50 140 -6° -6°
d1 C5-DSDNN-00060-12 12 C5 0,3 60 165 -6° -6° SN .. 1204 ..

C6-DSDNN-00065-12 12 C6 0,3 65 190 -6° -6°
C6-DSDNN-00070-19 19 C6 0,5 70 195 -6° -6° SN .. 1906 ..
l4 C8-DSDNN-00080-25 25 C8 1 80 250 -6° -6° SN .. 2507 ..
45˚ 45˚
f

Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1906 .. SN .. 2507 ..

d1 C4 C5/C6 C6 C8
FS1465 (Torx 15IP / FS1465 (Torx 15IP /

SW 3,5) SW 3,5)
Accessories
Type SN .. 1204 .. SN .. 1906 .. SN .. 2507 ..
Clamp set
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for SN .. 1207 .. AP413-SN1207
Shim for SN .. 2509 .. AP351-SN2509
A 27 D1 A 234 A 261 A 262

ISO turning
A1
Turning toolholders – Wedge-type clamping
C...-MTJN
Walter Turn
– Walter Capto™
≤22°
93°
TN . . TN . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C3-MTJNR/L-22040-16 16 C3 22 40 -6° -6°
d1 C4-MTJNR/L-27050-16 16 C4 27 50 -6° -6° TN .. 1604 ..

C5-MTJNR/L-35060-16 16 C5 35 60 -6° -6°
C4-MTJNR/L-27050-22 22 C4 27 50 -6° -6°
93˚
l4 C5-MTJNR/L-35060-22 22 C5 35 60 -6° -6° TN .. 2204 ..
C6-MTJNR/L-45065-22 22 C6 45 65 -6° -6°
f

Ordering example, right-hand tool: C3-MTJNR-22040-16/ordering example, left-hand tool: C3-MTJNL-22040-16
Assembly parts Type TN .. 1604 .. TN .. 1604 .. TN .. 1604 .. TN .. 2204 .. TN .. 2204 ..

d1 C3 C4 C5 C4 C5/C6
Shim AP147 AP147 AP147 AP148 AP148
Clamping wedge set FK303 (SW 2,5) FK303 (SW 2,5) FK303 (SW 2,5) FK304 (SW 3) FK304 (SW 3)
Pin RS106 RS106 RS106 RS107 RS107
ISO2936-2,5 ISO2936-2,5 ISO2936-2,5 ISO2936-3 ISO2936-3

Allen key
(SW 2,5) (SW 2,5) (SW 2,5) (SW 3) (SW 3)
Clamping screw FS358 (SW 3) FS358 (SW 3) FS358 (SW 3) FS358 (SW 3) FS358 (SW 3)
Accessories
Type TN .. 2204 ..
Shim AP149
A 30 D1 A 234 A 261

ISO turning
A1
C...-DTGN...-P
Walter Turn
– Walter Capto™
91°
TN . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-DTGNR/L-27050-16-P 16 C4 27 50 -6° -6° TN .. 1604 ..
d1
l4
Measured with master insert: TN .. 160408

Ordering example, right-hand tool: C4-DTGNR-27050-16-P/ordering example, left-hand tool: C4-DTGNL-27050-16-P
Assembly parts
Type TN .. 1604 ..
Shim AP321-TN16

Clamp PK255

Accessories
Type TN .. 1604 ..
Clamp set
PK255 SET
A 30 D1 A 234 A 261 A 262

ISO turning
A1
C...-DVJN
Walter Turn
– Walter Capto™
≤44°
93°
VN . . VN . .

Walter Capto™ in accordance with ISO 26623 C4-DVJNR/L-27062-16 16 C4 27 62 60 152 -4° -13°
d1 C5-DVJNR/L-35065-16 16 C5 35 65 65 170 -4° -13°

VN .. 1604 ..
C6-DVJNR/L-45065-16 16 C6 45 65 81 190 -4° -13°
C8-DVJNR/L-55080-16 16 C8 55 80 100 250 -4° -13°
93˚ l4

Ordering example, right-hand tool: C4-DVJNR-27062-16/ordering example, left-hand tool: C4-DVJNL-27062-16
Assembly parts Type VN .. 1604 .. VN .. 1604 .. VN .. 1604 ..

d1 C4 C5/C6 C8
Shim AP312-VN16 AP312-VN16 AP312-VN16
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5)
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 234 A 261 A 262

ISO turning
A1
C...-DWLN
Walter Turn
– Walter Capto™
95°
WN . . WN . .

Walter Capto™ in accordance with ISO 26623 C4-DWLNR/L-27050-06 6 C4 27 50 60 140 -6° -6°
d1 C5-DWLNR/L-35060-06 6 C5 35 60 65 165 -6° -6° WN .. 0604 ..

C6-DWLNR/L-45065-06 6 C6 45 65 81 190 -6° -6°
C4-DWLNR/L-27050-08 8 C4 27 50 110 140 -6° -6°
95˚ l4 C5-DWLNR/L-35060-08 8 C5 35 60 110 165 -6° -6° WN .. 0804 ..

C6-DWLNR/L-45065-08 8 C6 45 65 110 190 -6° -6°
f
C5-DWLNR/L-35060-10 10 C5 35 60 115 170 -6° -6°
WN .. 1006 ..
C6-DWLNR/L-45065-10 10 C6 45 65 115 195 -6° -6°

Ordering example, right-hand tool: C4-DWLNR-27050-06/ordering example, left-hand tool: C4-DWLNL-27050-06
Assembly parts Type WN .. 0604 .. WN .. 0604 .. WN .. 0804 .. WN .. 0804 .. WN .. 1006 ..

d1 C4 C5/C6 C4 C5/C6 C5/C6
Shim AP306-WN06 AP306-WN06 AP307-WN08 AP307-WN08 AP311-WN10
FS1462 FS1462 FS1461 FS1461 FS1463

Screw for shim
Tightening torque
1,5 Nm 1,5 Nm 2,5 Nm 2,5 Nm 5,0 Nm
FS1472 FS1472 FS1473 FS1473 FS1474

Clamp screw
Tightening torque
1,7 Nm 1,7 Nm 3,9 Nm 3,9 Nm 6,4 Nm
Pin RS116 RS116 RS117 RS117 RS117
FS1465 FS1465
FS1466 FS1466 FS1464
SW 3,5) SW 3,5)
Accessories
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 34 D1 A 234 A 261 A 262

ISO turning
A1
C...-DWLN...-P
Walter Turn
– Walter Capto™
95°
WN . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-DWLNR/L-27050-08-P 8 C4 27 50 -6° -6°
d1 C5-DWLNR/L-35060-08-P 8 C5 35 60 -6° -6° WN .. 0804 ..

C6-DWLNR/L-45065-08-P 8 C6 45 65 -6° -6°
l4
Measured with master insert: WN .. 080408

Ordering example, right-hand tool: C4-DWLNR-27050-08-P/ordering example, left-hand tool: C4-DWLNL-27050-08-P
Assembly parts
Type WN .. 0804 ..
Shim AP307-WN08

Clamp PK255

Accessories
Type WN .. 0804 ..
Clamp set
PK255 SET
A 34 D1 A 234 A 261 A 262

ISO turning
A1
C...-PWLN
Walter Turn
– Walter Capto™
95°
WN . . WN . .

Walter Capto™ in accordance with ISO 26623 C3-PWLNR/L-22040-06 6 C3 22 40 60 116 -6° -6°
WN .. 0604 ..
d1 C4-PWLNR/L-27050-06 6 C4 27 50 60 140 -6° -6°
C4-PWLNR/L-27050-08 8 C4 27 50 60 140 -6° -6°
C5-PWLNR/L-35060-08 8 C5 35 60 65 165 -6° -6° WN .. 0804 ..
95˚ l4 C6-PWLNR/L-45065-08 8 C6 45 65 81 190 -6° -6°
C5-PWLNR/L-35060-10 10 C5 35 60 80 165 -6° -6°
f WN .. 1006 ..
C6-PWLNR/L-45065-10 10 C6 45 65 81 190 -6° -6°

Ordering example, right-hand tool: C3-PWLNR-22040-06/ordering example, left-hand tool: C3-PWLNL-22040-06
Assembly parts Type WN .. 0604 .. WN .. 0804 .. WN .. 0804 .. WN .. 1006 ..

d1 C3/C4 C4 C5/C6 C5/C6
Shim AP172-WN0612 AP170-WN0816 AP170-WN0816 AP174-WN1016
Clamping screw FS351 (SW 2,5) FS352 (SW 3) FS352 (SW 3) FS354 (SW 3)
Allen key ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-3 (SW 3)
Accessories
Type WN .. 0804 ..
Shim AP170-WN0808
A 34 D1 A 234 A 261

ISO turning
A1
Turning toolholders – Screw clamping
C...-SCLC
Walter Turn
– Walter Capto™
7°
95°
CC . .

Walter Capto™ in accordance with ISO 26623 C3-SCLCR/L-22040-09 9 C3 22 40 130 116 0° 0°
d1 C4-SCLCR/L-27050-09 9 C4 27 50 130 140 0° 0°

CC .. 09T3 ..
C5-SCLCR/L-35060-09 9 C5 35 60 130 165 0° 0°
C6-SCLCR/L-45065-09 9 C6 45 65 130 190 0° 0°
95˚ l4
C4-SCLCR/L-27050-12 12 C4 27 50 125 140 0° 0°
C5-SCLCR/L-35060-12 12 C5 35 60 125 165 0° 0° CC .. 1204 ..
f
C6-SCLCR/L-45065-12 12 C6 45 65 125 190 0° 0°
Measured with master insert: CC .. 09T308 / CC .. 120408

Ordering example, right-hand tool: C3-SCLCR-22040-09/ordering example, left-hand tool: C3-SCLCL-22040-09
Assembly parts Type CC .. 09T3 .. CC .. 09T3 .. CC .. 1204 .. CC .. 1204 ..

d1 C3/C4 C5/C6 C4 C5/C6
FS2060 (Torx 15IP) FS2060 (Torx 15IP) FS2065 (Torx 15IP) FS2065 (Torx 15IP)
Tightening torque
3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm
Shim AP313-CC0908 AP313-CC0908 AP314-CC1212 AP314-CC1212
Screw for shim FS2068 (SW 3,5) FS2068 (SW 3,5) FS2069 (SW 4) FS2069 (SW 4)
FS1465 (Torx 15IP / FS1465 (Torx 15IP / FS1496 (Torx 15IP / FS1496 (Torx 15IP /
Torx key
SW 3,5) SW 3,5) SW 4) SW 4)
A 37 D1 A 238 A 261

ISO turning
A1
C...-SDJC
Walter Turn
– Walter Capto™
≤30°
7°
93°
DC . .

Walter Capto™ in accordance with ISO 26623 C3-SDJCR/L-22040-07 7 C3 22 40 70 116 0° 0°
DC .. 0702 ..
d1 C4-SDJCR/L-27050-07 7 C4 27 50 70 140 0° 0°
C3-SDJCR/L-22040-11 11 C3 22 40 140 116 0° 0°
C4-SDJCR/L-27050-11 11 C4 27 50 140 140 0° 0°
DC .. 11T3 ..
93˚ l4 C5-SDJCR/L-35060-11 11 C5 35 60 140 190 0° 0°
f
C6-SDJCR/L-45065-11 11 C6 45 65 140 165 0° 0°

Ordering example, right-hand tool: C3-SDJCR-22040-07/ordering example, left-hand tool: C3-SDJCL-22040-07
Assembly parts Type DC .. 0702 .. DC .. 11T3 .. DC .. 11T3 ..

d1 C3/C4 C3/C4 C5/C6
FS2061 (Torx 7IP) FS2060 (Torx 15IP) FS2060 (Torx 15IP)
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm
Shim AP315-DC1108 AP315-DC1108
Screw for shim FS2068 (SW 3,5) FS2068 (SW 3,5)
Accessories
Type DC .. 11T3 ..
Shim AP329-DC1112
A 42 D1 A 238 A 261

ISO turning
A1
C...-SDNC
Walter Turn
– Walter Capto™
7°
62°30‘ ≤60°
DC . .

Walter Capto™ in accordance with ISO 26623 C3-SDNCN-00040-11 11 C3 0,5 40 116 0° 0°
d1 C4-SDNCN-00050-11 11 C4 0,5 50 140 0° 0° DC .. 11T3 ..

C5-SDNCN-00060-11 11 C5 0,5 60 165 0° 0°
l4
62°30' 62°30'
f
Measured with master insert: DC .. 11T308

Assembly parts Type DC .. 11T3 .. DC .. 11T3 ..

d1 C3/C4 C5
FS2060 (Torx 15IP) FS2060 (Torx 15IP)
Tightening torque
3,0 Nm 3,0 Nm
Shim AP315-DC1108 AP315-DC1108
Cooling lubricant nozzle FS1477 FS1476
Accessories
Type DC .. 11T3 ..
Shim AP329-DC1112
A 42 D1 A 238 A 261

ISO turning
A1
C...-SRDC
Walter Turn
– Walter Capto™
7°
90°
RC . T
Tool f l4 l16
Walter Capto™ in accordance with ISO 26623 C3-SRDCN-00040-06 6 C3 3 40 12 0° 0°
d1 C4-SRDCN-00050-06 6 C4 3 50 12 0° 0° RC . T0602M0 ..
C5-SRDCN-00060-06 6 C5 3 60 12 0° 0°
C3-SRDCN-00040-08 8 C3 4 40 16 0° 0°
l4 C4-SRDCN-00050-08 8 C4 4 50 16 0° 0° RC . T0803M0 ..
l16
C5-SRDCN-00060-08 8 C5 4 60 16 0° 0°
f
C3-SRDCN-00040-10 10 C3 5 40 20 0° 0°
C4-SRDCN-00050-10 10 C4 5 50 25 0° 0°
RC . T10T3M0 ..
C5-SRDCN-00060-10 10 C5 5 60 25 0° 0°
C6-SRDCN-00065-10 10 C6 5 65 25 0° 0°
C4-SRDCN-00050-12 12 C4 6 50 28 0° 0°
C5-SRDCN-00060-12 12 C5 6 60 28 0° 0° RC . T1204M0 ..
C6-SRDCN-00065-12 12 C6 6 65 28 0° 0°
C5-SRDCN-00060-16 16 C5 8 60 35 0° 0°
RC . T1606M0 ..
C6-SRDCN-00065-16 16 C6 8 65 35 0° 0°
RC . RC . RC . RC . RC . RC . RC . RC . RC .
Assembly parts Type T0602M0 .. T0602M0 .. T0803M0 .. T0803M0 .. T10T3M0 .. T10T3M0 .. T1204M0 .. T1204M0 .. T1606M0 ..
d1 C3/C4 C5 C3/C4 C5 C3/C4 C5/C6 C4 C5/C6 C5/C6
Clamping screw for FS2061 FS2061 FS1462 FS1462 FS2063 FS2063 FS2060 FS2060 FS2090
indexable insert (Torx 7IP) (Torx 7IP) (Torx 9IP) (Torx 9IP) (Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 20IP)
Tightening torque 0,9 Nm 0,9 Nm 1,5 Nm 1,5 Nm 3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm 6,4 Nm
AP324- AP324- AP325- AP325- AP326-
Shim
RC10T3 RC10T3 RC1204 RC1204 RC1606
FS2068 FS2068 FS2068 FS2068 FS2091
Screw for shim
(SW 3,5) (SW 3,5) (SW 3,5) (SW 3,5) (SW 5)
FS1465 FS1465 FS1465 FS1465
FS1490 FS1490 FS1466 FS1466 FS1464
Torx key (Torx 15IP / (Torx 15IP / (Torx 15IP / (Torx 15IP /
SW 3,5) SW 3,5) SW 3,5) SW 3,5)
Cooling
lubricant nozzle
A 46 D1 A 238 A 261

ISO turning
A1
C...-PRDC
Walter Turn
– Walter Capto™
7° 7°
90°
RC . T RC . X
Tool f l4 l16
Walter Capto™ in accordance with ISO 26623 C5-PRDCN-00060-16 16 C5 8 60 35 0° 0°
RC .. 1605M0 ..
d1 C6-PRDCN-00065-16 16 C6 8 65 35 0° 0°
C5-PRDCN-00060-20 20 C5 10 60 40 0° 0°
RC .. 2006M0 ..
C6-PRDCN-00065-20 20 C6 10 65 40 0° 0°
l4 C6-PRDCN-00065-25 25 C6 12,5 65 40 0° 0° RC .. 2507M0 ..
l16
f
Measured with master insert: RC .. 1605M0 / RC .. 2006M0 / RC .. 2507M0

Assembly parts
Type RC .. 1605M0 .. RC .. 2006M0 .. RC .. 2507M0 ..
Shim AP157 AP158 AP405-RC2507

Torx key FS1155 (SW 2,5) ISO2936-3 (SW 3) ISO2936-4 (SW 4)
Accessories
Type RC .. 1605M0 ..
Shim for RC .. 1606 .. AP403
A 46 D1 A 238 A 261

ISO turning
A1
C...-SRSC
Walter Turn
– Walter Capto™
7°
≤27°
RC . T

Walter Capto™ in accordance with ISO 26623 C3-SRSCR/L-22040-06 6 C3 22 40 160 116 0° 0°
d1 C4-SRSCR/L-27050-06 6 C4 27 50 160 140 0° 0° RC . T0602M0 ..

C5-SRSCR/L-35060-06 6 C5 35 60 160 165 0° 0°
C3-SRSCR/L-22040-08 8 C3 22 40 110 116 0° 0°
l4 C4-SRSCR/L-27050-08 8 C4 27 50 110 140 0° 0° RC . T0803M0 ..
f C5-SRSCR/L-35060-08 8 C5 35 60 110 165 0° 0°

C3-SRSCR/L-22040-10 10 C3 22 40 150 116 0° 0°
C4-SRSCR/L-27050-10 10 C4 27 50 150 140 0° 0°
RC . T10T3M0 ..
C5-SRSCR/L-35060-10 10 C5 35 60 150 165 0° 0°
C6-SRSCR/L-45065-10 10 C6 45 65 150 190 0° 0°
C4-SRSCR/L-27050-12 12 C4 27 50 150 140 0° 0°
C5-SRSCR/L-35060-12 12 C5 35 60 150 165 0° 0° RC . T1204M0 ..
C6-SRSCR/L-45065-12 12 C6 45 65 175 190 0° 0°
C5-SRSCR/L-35060-16 16 C5 35 60 175 165 0° 0°
RC . T1606M0 ..
C6-SRSCR/L-45065-16 16 C6 45 65 175 190 0° 0°
Ordering example, right-hand tool: C3-SRSCR-22040-06/ordering example, left-hand tool: C3-SRSCL-22040-06
RC . RC . RC . RC . RC . RC . RC . RC . RC .
Assembly parts Type T0602M0 .. T0602M0 .. T0803M0 .. T0803M0 .. T10T3M0 .. T10T3M0 .. T1204M0 .. T1204M0 .. T1606M0 ..
d1 C3/C4 C5 C3/C4 C5 C3/C4 C5/C6 C4 C5/C6 C5/C6
Clamping screw for FS2061 FS2061 FS1462 FS1462 FS2063 FS2063 FS2060 FS2060 FS2090
indexable insert (Torx 7IP) (Torx 7IP) (Torx 9IP) (Torx 9IP) (Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 15IP) (Torx 20IP)
Tightening torque 0,9 Nm 0,9 Nm 1,5 Nm 1,5 Nm 3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm 6,4 Nm
AP324- AP324- AP325- AP325- AP326-
Shim
RC10T3 RC10T3 RC1204 RC1204 RC1606
FS2068 FS2068 FS2068 FS2068 FS2091
Screw for shim
(SW 3,5) (SW 3,5) (SW 3,5) (SW 3,5) (SW 5)
FS1465 FS1465 FS1465 FS1465
FS1490 FS1490 FS1466 FS1466 FS1464
SW 3,5) SW 3,5) SW 3,5) SW 3,5)
Cooling
lubricant nozzle
A 46 D1 A 238 A 261

ISO turning
A1
C...-PRSC
Walter Turn
– Walter Capto™
7° 7°
≤27°
RC . T RC . X

Walter Capto™ in accordance with ISO 26623 C5-PRSCR/L-35060-16 16 C5 35 60 0° 0°
RC .. 1605M0 ..
d1 C6-PRSCR/L-45065-16 16 C6 45 65 0° 0°
C5-PRSCR/L-35060-20 20 C5 35 60 0° 0°
C6-PRSCR/L-45065-20 20 C6 45 65 0° 0° RC .. 2006M0 ..
l4 C8-PRSCR/L-55080-20 20 C8 55 80 150 250 0° 0°
C6-PRSCR/L-45065-25 25 C6 45 65 200 190 0° 0°
f RC .. 2507M0 ..
C8-PRSCR/L-55080-25 25 C8 55 80 200 250 0° 0°
Measured with master insert: RC .. 1605M0 / RC .. 2006M0 / RC .. 2507M0

Ordering example, right-hand tool: C5-PRSCR-35060-16/ordering example, left-hand tool: C5-PRSCL-35060-16
Assembly parts Type RC .. 1605M0 .. RC .. 2006M0 .. RC .. 2006M0 .. RC .. 2507M0 .. RC .. 2507M0 ..

d1 C5/C6 C5/C6 C8 C6 C8
Shim AP157 AP158 AP404-RC2006 AP405-RC2507 AP405-RC2507
Clamping screw FS344 (SW 2,5) FS2156 (SW 3) FS2156 (SW 3) FS2145 (SW 4) FS2145 (SW 4)
ISO2936-2,5 ISO2936-3 ISO2936-3 ISO2936-4 ISO2936-4

Allen key
(SW 2,5) (SW 3) (SW 3) (SW 4) (SW 4)
Accessories
Type RC .. 1605M0 ..
Shim for RC .. 1606 .. AP403
A 46 D1 A 238 A 261

ISO turning
A1
C...-STGC
Walter Turn
– Walter Capto™
7°
91°
TC . .

Walter Capto™ in accordance with ISO 26623 C3-STGCR/L-22040-11 11 C3 22 40 90 116 0° 0°
TC .. 1102 ..
d1 C4-STGCR/L-27050-11 11 C4 27 50 90 140 0° 0°
C3-STGCR/L-22040-16 16 C3 22 40 90 116 0° 0°
C4-STGCR/L-27050-16 16 C4 27 50 140 140 0° 0°
TC .. 16T3 ..
91˚ l4 C5-STGCR/L-35060-16 16 C5 35 60 140 165 0° 0°
C6-STGCR/L-45065-16 16 C6 45 65 140 190 0° 0°
f

Ordering example, right-hand tool: C3-STGCR-22040-11/ordering example, left-hand tool: C3-STGCL-22040-11
Assembly parts Type TC .. 1102 .. TC .. 16T3 .. TC .. 16T3 ..

d1 C3/C4 C3/C4 C5/C6
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm
Shim AP317-TC1612 AP317-TC1612
A 51 D1 A 238 A 261

ISO turning
A1
C...-SVHB
Walter Turn
– Walter Capto™
5° 7°
≤35°
107°30‘
VB . . VC . .

Walter Capto™ in accordance with ISO 26623 C3-SVHBR/L-22040-11 11 C3 22 40 55 114 0° 0° VB .. 1103 ..
C4-SVHBR/L-27050-11 11 C4 27 50 55 140 0° 0° VC .. 1103 ..
d1
C4-SVHBR/L-27050-16 16 C4 27 50 95 140 0° 0°
VB .. 1604 ..
C5-SVHBR/L-35060-16 16 C5 35 60 95 165 0° 0°
VC .. 1604 ..
l4 C6-SVHBR/L-45065-16 16 C6 45 65 95 190 0° 0°
107˚30'

Ordering example, right-hand tool: C3-SVHBR-22040-11/ordering example, left-hand tool: C3-SVHBL-22040-11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

d1 C3/C4 C4 C5/C6
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm
Shim AP316-VB1608 AP316-VB1608

Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
C...-PVHB
Walter Turn
– Walter Capto™
5° 7°
≤35°
107°30‘
VB . . VC . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-PVHBR/L-27050-16 16 C4 27 50 0° 0°
VB .. 1604 ..
d1 C5-PVHBR/L-35060-16 16 C5 35 60 0° 0°
VC .. 1604 ..
C6-PVHBR/L-45065-16 16 C6 45 65 0° 0°
107˚30' l
4
Measured with master insert: VB .. 160408

Ordering example, right-hand tool: C4-PVHBR-27050-16/ordering example, left-hand tool: C4-PVHBL-27050-16
VB .. 1604 .. VB .. 1604 ..
Assembly parts Type VC .. 1604 .. VC .. 1604 ..
d1 C4 C5/C6
Shim AP153 AP153
Lever KN110 KN110
Clamping screw FS351 (SW 2,5) FS351 (SW 2,5)

Allen key ISO2936-2,5 (SW 2,5) ISO2936-2,5 (SW 2,5)
Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
C...-SVJB
Walter Turn
– Walter Capto™
5° 7°
≤50°
93°
VB . . VC . .

Walter Capto™ in accordance with ISO 26623 C3-SVJBR/L-22040-11 11 C3 22 40 55 116 0° 0° VB .. 1103 ..
C4-SVJBR/L-27050-11 11 C4 27 50 55 150 0° 0° VC .. 1103 ..
d1
C4-SVJBR/L-27050-16 16 C4 27 50 155 140 0° 0°
VB .. 1604 ..
C5-SVJBR/L-35060-16 16 C5 35 60 155 165 0° 0°
VC .. 1604 ..
93˚ l4 C6-SVJBR/L-45065-16 16 C6 45 65 155 190 0° 0°

Ordering example, right-hand tool: C3-SVJBR-22040-11/ordering example, left-hand tool: C3-SVJBL-22040-11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

d1 C3/C4 C4 C5/C6
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm

Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
C...-PVJB
Walter Turn
– Walter Capto™
5° 7°
≤50°
93°
VB . . VC . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-PVJBR/L-27050-16 16 C4 27 50 0° 0°
VB .. 1604 ..
d1 C5-PVJBR/L-35060-16 16 C5 35 60 0° 0°
VC .. 1604 ..
C6-PVJBR/L-45065-16 16 C6 45 65 0° 0°
93˚ l4

Ordering example, right-hand tool: C4-PVJBR-27050-16/ordering example, left-hand tool: C4-PVJBL-27050-16
VB .. 1604 .. VB .. 1604 ..
d1 C4 C5/C6
Shim AP153 AP153
Lever KN110 KN110

Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
C...-SVVB
Walter Turn
– Walter Capto™
5° 7°
72°30‘ ≤70°
VB . . VC . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C3-SVVBN-00040-11 11 C3 0,3 40 116 0° 0° VB .. 1103 ..
C4-SVVBN-00050-11 11 C4 0,3 50 140 0° 0° VC .. 1103 ..
d1
C4-SVVBN-00050-16 16 C4 0,6 50 140 0° 0°
VB .. 1604 ..
C5-SVVBN-00060-16 16 C5 0,6 60 165 0° 0°
VC .. 1604 ..
l4 C6-SVVBN-00065-16 16 C6 0,6 65 190 0° 0°
72˚30' 72˚30'
f

VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

d1 C3/C4 C4 C5/C6
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1
C...-PVVB
Walter Turn
– Walter Capto™
5° 7°
72°30‘ ≤70°
VB . . VC . .
Tool f l4
Walter Capto™ in accordance with ISO 26623 C4-PVVBN-00050-16 16 C4 0,6 50 0° 0°
VB .. 1604 ..
d1 C5-PVVBN-00060-16 16 C5 0,6 60 0° 0°
VC .. 1604 ..
C6-PVVBN-00065-16 16 C6 0,6 65 0° 0°
l4
72˚30' 72˚30'
f

VB .. 1604 .. VB .. 1604 ..
d1 C4 C5/C6
Shim AP153 AP153
Lever KN110 KN110

Type VC .. 1604 ..
Shim AP154
A 55 D1 A 238 A 261

ISO turning
A1
45° turning toolholders – Rigid clamping
C...-DCMN
Walter Turn
– Walter Capto™
– Toolholders for turning and milling centres
95°
CN . . CN . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C5-DCMNN-00105-12 12 C5 0 105 110 -6° -6°
d1 C6-DCMNN-00090-12 12 C6 0 90 110 -6° -6° CN .. 1204 ..

C6-DCMNN-00115-12 12 C6 0 115 110 -6° -6°
C6-DCMNN-00090-16 16 C6 0 90 110 -6° -6°
CN .. 1606 ..
Dmin2 C8-DCMNN-00150-16 16 C8 0 150 115 -6° -6°
l4
50˚ 50˚
f

Assembly parts Type CN .. 1204 .. CN .. 1204 .. CN .. 1606 ..

d1 C5 C6 C6/C8
Torx key FS1465 (Torx 15IP / SW 3,5) FS1465 (Torx 15IP / SW 3,5) FS1464 (Torx 20IP)
Accessories
Type CN .. 1204 .. CN .. 1606 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for CN .. 1207 .. AP411-CN1207
A 20 D1 A 182 A 182 A 182

ISO turning
A1
C...-DDMN
Walter Turn
– Walter Capto™
93°
27° ≤ 45°
DN . . DN . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C5-DDMNL-00115-15 15 C5 0 115 110 -5° -6°
C6-DDMNL-00130-15 15 C6 0 130 110 -5° -6°
d1 DN .. 1506 ..
C6-DDMNL-33120-15 15 C6 33 120 130 -5° -6°
C8-DDMNL-00160-15 15 C8 0 160 120 -5° -6°
Dmin2
l4
48˚
f

Assembly parts Type DN .. 1506 .. DN .. 1506 ..

d1 C5 C6/C8

Clamp PK241 PK241

Pin RS117 RS117
Accessories
Type DN .. 1506 ..
Clamp set
PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
Shim for DN .. 1507 .. AP412-DN1507
A 24 D1 A 182 A 182 A 182

ISO turning
A1
C...-DVMN
Walter Turn
– Walter Capto™
95°
≤47° ≤47°
VN . . VN . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C8-DVMNL-00160-16 16 C8 0 160 110 -4° -14° VN .. 1604 ..
d1
Dmin2
l4
50˚
f

Assembly parts
Type VN .. 1604 ..
Shim AP312-VN16

Clamp PK244

Pin RS117
Cooling lubricant nozzle FS1479
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 182 A 182 A 182

ISO turning
A1
45° turning toolholders – Screw clamping
C...-SCMC
Walter Turn
– Walter Capto™
95°
7°
CC . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C6-SCMCN-00090-12 12 C6 0 90 100 0° 0° CC .. 1204 ..
d1
Dmin2
l4
50˚ 50˚
f
Measured with master insert: CC .. 120408

Assembly parts
Type CC .. 1204 ..
Clamping screw for indexable insert FS2065 (Torx 15IP)
Shim AP319-SC1212
Screw for shim FS2069 (SW 4)
Torx key FS1496 (Torx 15IP / SW 4)
A 37 D1 A 182 A 182

ISO turning
A1
C...-SRDC
Walter Turn
– Walter Capto™
7°
RC . T
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C6-SRDCN-00100-10 10 C6 5 100 110 0° 0° RC . T10T3M0 ..
C6-SRDCN-00100-16 16 C6 8 100 110 0° 0° RC . T1606M0 ..
d1
Dmin2
l4
Measured with master insert: RC . T10T3M0 / RC . T1606M0

Assembly parts
Type RC . T10T3M0 .. RC . T1606M0 ..
Shim AP324-RC10T3 AP326-RC1606
A 46 D1 A 182 A 182

ISO turning
A1
C...-SVMB
Walter Turn
– Walter Capto™
95°
≤47° ≤47°
5° 7°
VB . . VC . .
Tool f l4 Dmin2
Walter Capto™ in accordance with ISO 26623 C5-SVMBL-00115-16 16 C5 0 115 110 0° 0°
VB .. 1604 ..
d1 C6-SVMBL-00130-16 16 C6 0 130 110 0° 0°
VC .. 1604 ..
C6-SVMBL-33120-16 16 C6 33 120 110 0° 0°
Dmin2 l4
50˚
f

Assembly parts VB .. 1604 ..

Type VC .. 1604 ..
Clamping screw for indexable insert FS2060 (Torx 15IP)
Shim AP316-VB1608
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 182 A 182

A 188
ISO turning
A1
Walter Turn/Walter Capto™ product description – Internal machining
Boring bars for indexable inserts with a negative basic shape
Walter Turn rigid clamping (D)

– The number one choice for machining short-chipping materials such as cast iron
– Functionality is maintained even in “dirty environments”, e.g. grey cast iron machining
– The number one choice for interrupted cuts thanks to stable insert clamping
– The indexable insert or shim can be replaced using the same wrench
– Reinforced clamps with carbide shoe available for longer clamp tool life
– Internal coolant supply on all tools
Walter Turn lever clamp (P)

– Universal system enabling easy replacement of indexable inserts
– Number one choice for single-sided negative indexable inserts, e.g. CNMM
– Number one choice when machining small hole diameters with negative indexable
inserts
– Unobstructed chip evacuation due to centre hole locking and therefore an alternative
to rigid clamping
Boring bars for indexable inserts with a positive basic shape
Walter Turn screw clamping (S)

– For indexable inserts with a positive basic shape with 5° and 7° clearance angle
– Machining of small hole diameters
– For use with low cutting pressures/long projection lengths
– Few assembly parts
– Torx Plus screw clamping for transmitting higher tightening torques
– The indexable insert or shim can be replaced using the same wrench
– Unobstructed chip evacuation due to centre hole locking
– Versions with steel or solid carbide shank
Walter Turn positive lever clamp (P)

– For indexable inserts with a positive V basic shape with 5° and 7° clearance angle
– High dimensional accuracy on the component thanks to high pre-tension applied
by the lever clamp
– For use with low cutting pressures/long projection lengths
– Unobstructed chip evacuation due to centre hole locking
Retaining sleeves for boring bars with fully rounded shank
Walter Turn AK600 boring bar adaptor

– Easy handling due to automatic centre height location via spring-loaded
ball to groove
– Fully rounded shank boring bars are completely enclosed for maximum stability
– Clamping of steel and solid carbide boring bars without clamping flat (-R)
Walter Turn turning tools – Internal machining A 189

ISO turning
A1
Walter Turn turning tools product range overview – Internal machining

Boring bars – Negative basic shape
95° 93°
75°
Machining
≤ 27°
80° 90°
Type 55°
CN . . DN . . SN . .
Designation A...-DCLN A...-PCLN A...-DDUN A...-PDUN A...-DSKN A...-PSKN
Approach angle κ 95° 95° 93° 93° 75° 75°
Clamping system Clamp Lever Clamp Lever Clamp Lever
Boring bar diameter

25–50 16–40 25–50 25–40 25–40 25–40
d1 [mm]
Insert size l [mm] 12–16 9–16 11–15 11–15 12–15 12
Page A 199 A 200 A 201 A 202 A 203 A 204
91° 93° 95°

Machining
≤ 50°
Type 60° 35° 80°

TN . . VN . . WN . .
Designation A...-DTFN A...-PTFN A...-DVUN A...-DWLN A...-PWLN
Approach angle κ 91° 91° 93° 95° 95°
Clamping system Clamp Lever Clamp Clamp Lever
Coolant supply internal internal internal internal internal
Boring bar diameter

25–50 16–40 40 25–50 20–32
d1 [mm]
Insert size l [mm] 16–22 11–22 16 6–10 6–8
Page A 205 A 206 A 207 A 208 A 209
A 190 Walter Turn turning tools – Internal machining

ISO turning
A1

Boring bars – Positive basic shape
95° 107°30‘ 91°

93°
75°
Machining
≤ 16° ≤ 30° ≤ 30°
80° 90°
Type 55° 60°
CC . . DC . . SC . . TC . .
Designation A...-SCLC / A...-SDQC A...-SDUC / A...-SDUC...-X A...-SSKC A...-STFC /
E...-SCLC E...-SDUC E...-STFC
Approach angle κ 95° 107,5° 93° 93° 75° 91°
Clamping system Screw Screw Screw Screw Screw Screw
Boring bar diameter

8–32 12–25 10–32 16–32 16–32 6–32
d1 [mm]
Insert size l [mm] 6–12 7–11 7–11 7–11 9–12 6–16
Page A 210 A 211 A 212 A 213 A 214 A 215
107°30‘ 93° 95°

Machining
≤ 35° ≤ 50°
Type 35° 35° 80°

VB . . / VC . . VB . . / VC . . WC . .
Designation A...-SVQB A...-PVQB A...-SVUB A...-PVUB A...-SWLC AK600
Approach angle κ 107,5° 107,5° 93° 93° 95°

Clamping system Screw Lever Screw Lever Screw
Coolant supply internal internal internal internal internal
Boring bar diameter

16–40 20–40 16–40 20–40 10–32 6–25
d1 [mm]
Insert size l [mm] 11–16 11–16 11–16 11–16 4–8
Page A 216 A 217 A 218 A 219 A 220 A 221

ISO turning
A1

Walter Capto™ boring bars – Negative basic shape
95° 93° 91°

75°
Machining
≤ 27°
80° 90°
Type 55° 60°
CN . . DN . . SN . . TN . .
Designation C...-DCLN C...-PCLN C...-DDUN C...-PDUN C...-PSKN C...-PTFN
Lead angle κ 95° 95° 93° 93° 75° 91°
Clamping system Clamp Lever Clamp Lever Lever Lever

Insert size l [mm] 12–16 12–16 11–15 11–15 12–15 16–22
Page A 222 A 223 A 224 A 225 A 226 A 227
95°
Machining
Type 80°
WN . .
Designation C...-DWLN C...-PWLN
Lead angle κ 95° 95°
Clamping system Clamp Lever

Insert size l [mm] 6–10 6–8
Page A 228 A 229

ISO turning
A1

Walter Capto™ boring bars – Positive basic shape
95° 91° 107°30‘

93°
Machining
≤ 30° ≤ 35°
80°
Type 55° 60° 35°
CC . . DC . . TC . . VB . . / VC . .
Designation C...-SCLC C...-SDUC C...-STFC C...-SVQB
Lead angle κ 95° 93° 91° 107,5°
Clamping system Screw Screw Screw Screw
Coolant supply internal internal internal internal
Walter Capto™ size C3–C5 C3–C5 C3–C5 C3–C6

Insert size l [mm] 9–12 7–11 11–16 11–16
Page A 230 A 231 A 232 A 233

A1
A 194
ISO turning
A1
Turning system overview – Walter Turn internal machining
Retaining sleeves
Walter Capto™ adaptors Walter Capto™
for boring bars
for boring bars with flats boring bars
with full cylindrical shank
C … -391.20
AK600 . . . C … -131 C … -391.27 C…
Page A 221 Page D 65 Page D 66 Page A 192
Boring bar with full

Boring bar with flats
cylindrical shank (-R)
e.g. E…-SCLC…-R e.g. A…-DCLN

Page A 191 Page A 190

ISO turning
A1
ISO designation key for turning toolholders – Internal machining
Example: Walter Turn
A 20 S – S C L C R 09 – R
1 2 3 4 5 6 7 8 9 10
0 1 2 3
Coupling size d1 Boring bar diameter Turning toolholder length l1
Shank design
[mm] d1 [mm] [mm]
C = Walter Capto™ A Solid steel design Shank diameter in mm. A 32 M 150

ISO 26623 with internal coolant supply Figures after the deci-
B 40 N 160
mal point are ignored.
Single-digit numbers C 50 P 170
C3 d1 = 32 are preceded by a “0”. D 60 Q 180
C4 d1 = 40
E 70 R 200
S Solid steel design
F 80 S 250
without internal coolant supply
C5 d1 = 50 G 90 T 300
C6 d1 = 63
H 100 U 350
J 110 V 400
C8 d1 = 80 d1 K 125 W 450
E Carbide shank with steel head
and internal coolant supply L 140 X Special
Y 500
d1
C Carbide shank with steel head,
d1 without internal coolant supply
l1
7 8 9 10
Indexable insert clearance Length of cutting edge l
Turning toolholder design Manufacturer option
angle [mm]
If necessary, an additional symbol compris-

B R = Right
ing a maximum of three letters or figures
5°
can be added to the standard code.
l
C This symbol must be separated from the
7° standard designation with a hyphen.
The following versions:

l
E
20° L = Left
–R Boring bars with fully rounded
shank
F l
25° –X Back copy boring bars
–W Wedge-type clamping
N
l
0°
P
11 °
l

ISO turning
A1
C4 – S C L C R – 27 080 – 12 ...
0 4 5 6 7 8 11 12 9 10
4 5 6
Insert mounting type Indexable insert basic shape Lead angle
C Top clamping 80°

C 90°
45°
55°
D Top and hole D
clamping 75° 93°
R
M Top and hole
clamping 90° 95°
S 60°
95°
60°
T
P Hole clamping
107° 85°
35° 30‘
V
S Screw clamping
W 80°
11 12
f dimension Tool length l4
[mm] [mm]
l4

ISO turning
A1
Walter Select – Internal machining
Workpiece characteristics from diameters of 20 mm from diameters of 8.5 mm
D Steel boring bar: Steel boring bar:

L/Dmax = 3/1 L/Dmax = 5/1
Solid carbide boring bar:

L/Dmax = 8/1
L
Basic shape Negative basic shape Positive basic shape
Holder clamping system Rigid clamping Lever clamp Screw clamping Lever clamp
Walter Turn/Walter Capto™
Product range overview Page A 190 Page A 190 Page A 191 Page A 191
Step 1:
Selecting the contour
to be machined
Longitudinal turning/facing CC CC CC C
Profile turning CC CC CC CC
Facing C CC CC CC
Interrupted cuts CC C CC C
Step 2:
Selecting the material
to be machined
P Steel CC CC CC CC
M Stainless steel C CC CC CC
K Cast iron CC C CC C
N NF metals — C — CC

S CC CC CC CC
cutting properties
H Hard materials CC C C C
O Other C C C C
plication
Primary ap
ation
Other applic

ISO turning
A1
Boring bar – Rigid clamping
A...-DCLN
Walter Turn
– A = Steel version with internal coolant supply
95°
CN . . CN . .
Tool Dmin d1 f h l1
d1 A25T-DCLNR/L12 12 32 25 17 23 300 -6° -12°

A32T-DCLNR/L12 12 40 32 22 30 300 -6° -10° CN .. 1204 ..
95˚
f A40T-DCLNR/L12 12 50 40 27 37 300 -6° -15°
h A40T-DCLNR/L16 16 50 40 27 37 300 -6° -16°
l1 CN .. 1606 ..
A50U-DCLNR/L16 16 63 50 35 47 350 -6° -13°
Dmin
λs

Ordering example, right-hand tool: A25T-DCLNR12/ordering example, left-hand tool: A25T-DCLNL12

Dmin [mm] 32–40 50 50–63
Accessories
Type CN .. 1204 .. CN .. 1606 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 20 D1 A 234 A 261 A 262

ISO turning
A1
Boring bar – Lever clamp
A...-PCLN
Walter Turn
95°
CN . . CN . .
Tool Dmin d1 f h l1
d1 A16R-PCLNR/L09 9 20 16 11 15 200 -6° -13°

A20S-PCLNR/L09 9 25 20 13 18 250 -6° -11° CN .. 0903 ..
95˚
f A25T-PCLNR/L09 9 32 25 17 23 300 -6° -10°
h A25T-PCLNR/L12 12 32 25 17 23 300 -6° -10°
l1
A32T-PCLNR/L12 12 40 32 22 30 300 -6° -11° CN .. 1204 ..
Dmin A40T-PCLNR/L12 12 50 40 27 37 300 -6° -10°

A32T-PCLNR/L16 16 55 32 22 30 300 -6° -10°
λs CN .. 1606 ..
A40T-PCLNR/L16 16 58 40 27 37 300 -6° -10°
Ordering example, right-hand tool: A16R-PCLNR09/ordering example, left-hand tool: A16R-PCLNL09
Assembly parts Type CN .. 0903 .. CN .. 1204 .. CN .. 1204 .. CN .. 1204 .. CN .. 1606 ..

Dmin [mm] 20–32 32 40 50 55–58
Clamping screw FS2182 (SW 2) FS332 (SW 2,5) FS2129 (SW 3) FS352 (SW 3) FS354 (SW 3)
ISO2936-2 ISO2936-2,5 ISO2936-3 ISO2936-3 ISO2936-3

Allen key
(SW 2) (SW 2,5) (SW 3) (SW 3) (SW 3)
Accessories
Type CN .. 1204 .. CN .. 1606 ..
for radiused insert r ≤ 0,8 mm r ≤ 1,6 mm
A 20 D1 A 234 A 261

ISO turning
A1
A...-DDUN
Walter Turn
93°
≤ 27°
DN . . DN . .
Tool Dmin d1 f h l1
d1 A25T-DDUNR/L11 11 32 25 17 23 300 -6° -12°

DN .. 1104 ..
A32T-DDUNR/L11 11 40 32 22 30 300 -6° -10°
93˚
f A32T-DDUNR/L15 15 40 32 22 30 300 -6° -14°
h A40T-DDUNR/L15 15 50 40 27 37 300 -6° -11° DN .. 1506 ..
l1
A50U-DDUNR/L15 15 63 50 35 47 350 -6° -8°
Dmin
λs

Ordering example, right-hand tool: A25T-DDUNR11/ordering example, left-hand tool: A25T-DDUNL11
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..

Clamp PK240 PK241

Pin RS116 RS117
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
A 24 D1 A 234 A 261 A 262

ISO turning
A1
A...-PDUN
Walter Turn
93°
≤ 27°
DN . . DN . .
Tool Dmin d1 f h l1
A25T-PDUNR/L11 11 32 25 17 23 300 -6° -11°
d1
A32T-PDUNR/L11 11 40 32 22 30 300 -6° -10° DN .. 1104 ..
93˚
A40T-PDUNR/L11 11 50 40 27 37 300 -6° -11°
f
A32T-PDUNR/L15 15 40 32 22 30 300 -6° -12°
h DN .. 1506 ..
l1 A40T-PDUNR/L15 15 50 40 27 37 300 -6° -11°
Dmin
λs

Ordering example, right-hand tool: A25T-PDUNR11/ordering example, left-hand tool: A25T-PDUNL11

Dmin [mm] 32 40–50 40–50
Clamping screw FS905 (SW 2) FS351 (SW 2,5) FS355 (SW 3)

Allen key ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3)
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Shim for DN .. 1504 .. AP357-DN1508
Shim for DN .. 1504 .. AP357-DN1516
A 24 D1 A 234 A 261

ISO turning
A1
A...-DSKN
Walter Turn
75°
SN . . SN . .
Tool Dmin d1 f h l1
d1 A25T-DSKNR/L12 12 32 25 17 23 300 -6° -11°

A32T-DSKNR/L12 12 40 32 22 30 300 -6° -9° SN .. 1204 ..
75˚
f A40T-DSKNR/L12 12 50 40 27 37 300 -6° -13°
h A40T-DSKNR/L15 15 50 40 27 37 300 -6° -14° SN .. 1506 ..
l1
Dmin
λs

Ordering example, right-hand tool: A25T-DSKNR12/ordering example, left-hand tool: A25T-DSKNL12
Assembly parts Type SN .. 1204 .. SN .. 1204 .. SN .. 1506 ..

Dmin [mm] 32–40 50 50
Accessories
Type SN .. 1204 .. SN .. 1506 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 27 D1 A 234 A 261 A 262

ISO turning
A1
A...-PSKN
Walter Turn
75°
SN . . SN . .
Tool Dmin d1 f h l1
d1 A25T-PSKNR/L12 12 32 25 17 23 300 -6° -11°

A32T-PSKNR/L12 12 40 32 22 30 300 -6° -10° SN .. 1204 ..
75˚
f A40T-PSKNR/L12 12 50 40 27 37 300 -6° -10°
h
l1
Dmin
λs
Measured with master insert: SN .. 120408

Ordering example, right-hand tool: A25T-PSKNR12/ordering example, left-hand tool: A25T-PSKNL12

Dmin [mm] 32 40 50

Accessories
Type SN .. 1204 ..
Shim AP141-SN1208
for radiused insert r ≤ 0,8 mm
A 27 D1 A 234 A 261

ISO turning
A1
A...-DTFN
Walter Turn
91°
TN . . TN . .
Tool Dmin d1 f h l1
d1 A25T-DTFNR/L16 16 32 25 17 23 300 -6° -12°

A32T-DTFNR/L16 16 40 32 22 30 300 -6° -10° TN .. 1604 ..
91˚
f A40T-DTFNR/L16 16 50 40 27 37 300 -6° -8°
h A40T-DTFNR/L22 22 50 40 27 37 300 -6° -13°
l1 TN .. 2204 ..
A50U-DTFNR/L22 22 63 50 35 47 350 -6° -10°
Dmin
λs

Ordering example, right-hand tool: A25T-DTFNR16/ordering example, left-hand tool: A25T-DTFNL16
Assembly parts
Type TN .. 1604 .. TN .. 2204 ..

Clamp PK240 PK241

Pin RS116 RS117
Accessories
Type TN .. 1604 .. TN .. 2204 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 30 D1 A 234 A 261 A 262

ISO turning
A1
A...-PTFN
Walter Turn
91°
TN . . TN . .
Tool Dmin d1 f h l1
d1 A16R-PTFNR/L11 11 20 16 11 15 200 -6° -14°

A20S-PTFNR/L11 11 25 20 13 18 250 -6° -12° TN .. 1103 ..
91˚
f A25T-PTFNR/L11 11 32 25 17 23 300 -6° -10°
h A25T-PTFNR/L16 16 32 25 17 23 300 -6° -13°
l1 TN .. 1604 ..
A32T-PTFNR/L16 16 50 32 22 30 300 -6° -12°
Dmin A40T-PTFNR/L22 22 50 40 27 37 300 -6° -11° TN .. 2204 ..
λs
Measured with master insert: TN .. 110304 / TN .. 160408 / TN .. 220408

Ordering example, right-hand tool: A16R-PTFNR11/ordering example, left-hand tool: A16R-PTFNL11
Assembly parts
Type TN .. 1103 .. TN .. 1604 .. TN .. 2204 ..

Accessories
Type TN .. 1604 .. TN .. 2204 ..
for radiused insert r ≤ 0,8 mm r ≤ 0,8 mm
A 30 D1 A 234 A 261

ISO turning
A1
A...-DVUN
Walter Turn
93°
≤ 50°
VN . . VN . .
Tool Dmin d1 f h l1
d1 A40T-DVUNR/L16 16 50 40 27 37 300 -6° -9° VN .. 1604 ..
93˚
f
h
l1
Dmin
λs

Ordering example, right-hand tool: A40T-DVUNR16/ordering example, left-hand tool: A40T-DVUNL16
Assembly parts
Type VN .. 1604 ..
Shim AP312-VN16

Clamp PK244

Pin RS117
Accessories
Type VN .. 1604 ..
Clamp set
PK244 SET
A 33 D1 A 234 A 261 A 262

ISO turning
A1
A...-DWLN
Walter Turn
95°
WN . . WN . .
Tool Dmin d1 f h l1
d1 A25T-DWLNR/L06 6 32 25 17 23 300 -6° -14°

WN .. 0604 ..
A32T-DWLNR/L06 6 40 32 22 30 300 -6° -11°
95˚
f A25T-DWLNR/L08 8 32 25 17 23 300 -6° -12°
h A32T-DWLNR/L08 8 40 32 22 30 300 -6° -10°
l1 WN .. 0804 ..
A40T-DWLNR/L08 8 50 40 27 37 300 -6° -13°
Dmin A50U-DWLNR/L08 8 63 50 35 47 350 -6° -11°

A40T-DWLNR/L10 10 50 40 27 37 300 -6° -16° WN .. 1006 ..
λs

Ordering example, right-hand tool: A25T-DWLNR06/ordering example, left-hand tool: A25T-DWLNL06

Dmin [mm] 32–40 32–40 50–63 50
Shim AP306-WN06 AP331-WN08 AP307-WN08 AP311-WN10
FS1465 (Torx 15IP / FS1465 (Torx 15IP /

SW 3,5) SW 3,5)
Accessories
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 34 D1 A 234 A 261 A 262

ISO turning
A1
A...-PWLN
Walter Turn
95°
WN . . WN . .
Tool Dmin d1 f h l1
A20S-PWLNR/L06 6 25 20 13 18 250 -6° -15°
d1
A25T-PWLNR/L06 6 32 25 17 23 300 -6° -12° WN .. 0604 ..
95˚ A32T-PWLNR/L06 6 40 32 22 30 300 -6° -12°
f A25T-PWLNR/L08 8 32 25 17 23 300 -6° -10°
h WN .. 0804 ..
l1 A32T-PWLNR/L08 8 40 32 22 30 300 -6° -10°
Dmin
λs
Measured with master insert: WN .. 060408 / WN .. 080408

Ordering example, right-hand tool: A20S-PWLNR06/ordering example, left-hand tool: A20S-PWLNL06

Dmin [mm] 25–32 40 32 40
Shim AP172-WN0612 AP170-WN0816
Clamping screw FS331 (SW 2) FS351 (SW 2,5) FS332 (SW 2,5) FS352 (SW 3)
Allen key ISO2936-2 (SW 2) ISO2936-2,5 (SW 2,5) ISO2936-2,5 (SW 2,5) ISO2936-3 (SW 3)
Accessories
Type WN .. 0804 ..
Shim AP170-WN0808
A 34 D1 A 234 A 261

ISO turning
A1
Boring bar – Screw clamping
A...-SCLC / E...-SCLC
Walter Turn
– E = Solid carbide version with internal coolant supply
95°
7°
CC . .
Tool Dmin d1 f h l1
d1 A08H-SCLCR/L06 6 10 8 5 7 100 0° -13,8°

A10K-SCLCR/L06 6 12 10 6 9 125 0° -10,9° CC .. 0602 ..
95˚
f A12M-SCLCR/L06 6 16 12 9 11 150 0° -7,3°
h A16R-SCLCR/L09 9 20 16 11 15 200 0° -8,4°
l1
A20S-SCLCR/L09 9 25 20 13 18 250 0° -5,7° CC .. 09T3 ..
Dmin A25T-SCLCR/L09 9 32 25 17 23 300 0° -3,4°
A25T-SCLCR/L12 12 32 25 17 23 300 0° -4,6°
λs CC .. 1204 ..
A32T-SCLCR/L12 12 40 32 22 30 300 0° -9,8°
A08H-SCLCR/L06-R 6 10 8 5 100 0° -13,8°
95˚
f E08K-SCLCR/L06-R 6 10 8 5 125 0° -13,8°
d1
A10K-SCLCR/L06-R 6 12 10 6 125 0° -10,9°
l1 CC .. 0602 ..
E10M-SCLCR/L06-R 6 12 10 6 150 0° -10,9°
Dmin A12M-SCLCR/L06-R 6 16 12 9 150 0° -7,3°
E12Q-SCLCR/L06-R 6 16 12 9 180 0° -7,3°
λs
A16R-SCLCR/L09-R 9 20 16 11 200 0° -8,4°
E16R-SCLCR/L09-R 9 20 16 11 200 0° -8,4°
A20S-SCLCR/L09-R 9 25 20 13 250 0° -5,7° CC .. 09T3 ..
E20S-SCLCR/L09-R 9 25 20 13 220 0° -6°
E25T-SCLCR/L09-R 9 32 25 17 270 0° -3°
Measured with master insert: CC .. 060204 / CC .. 09T308 / CC .. 120408
Ordering example, right-hand tool: A08H-SCLCR06/ordering example, left-hand tool: A08H-SCLCL06
Assembly parts Type CC .. 0602 .. CC .. 09T3 .. CC .. 09T3 .. CC .. 1204 .. CC .. 1204 ..

Dmin [mm] 10–16 20–25 32 32 40
FS2066 FS2062 FS2063 FS2064 FS2065
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm
Shim AP314-CC1212
FS1465 FS1465 FS1496 FS1496

FS1490
(Torx 7IP)
SW 3,5) SW 3,5) SW 4) SW 4)
A 37 D1 A 238 A 261 A 267

ISO turning
A1
A...-SDQC
Walter Turn
107°30‘
7°
≤ 16°
DC . .
Tool Dmin d1 f h l1
d1 A12M-SDQCR/L07 7 16 12 9 11 150 0° -7,1°

DC .. 0702 ..
107˚30' A16R-SDQCR/L07 7 20 16 11 15 200 0° -4,9°
f A20S-SDQCR/L11 11 25 20 13 18 250 0° -5,9°

DC .. 11T3 ..
h A25T-SDQCR/L11 11 32 25 17 23 300 0° -3,5°
l1
Dmin
λs
107˚30' A12M-SDQCR/L07-R 7 16 12 9 150 0° -7,1°

DC .. 0702 ..
f A16R-SDQCR/L07-R 7 20 16 11 200 0° -4,9°
d1
A20S-SDQCR/L11-R 11 25 20 13 250 0° -5,9° DC .. 11T3 ..
l1
Dmin
λs

Ordering example, right-hand tool: A12M-SDQCR07/ordering example, left-hand tool: A12M-SDQCL07

Dmin [mm] 16–20 25 32
A 42 D1 A 234 A 261 A 267

ISO turning
A1
A...-SDUC / E...-SDUC
Walter Turn
93°
7°
≤ 30°
DC . .
Tool Dmin d1 f h l1
d1 A10K-SDUCR/L07 7 13 10 7 9 125 0° -9,0°

A12M-SDUCR/L07 7 16 12 9 11 150 0° -6,5° DC .. 0702 ..
93˚
f A16R-SDUCR/L07 7 20 16 11 15 200 0° -4,3°
h A20S-SDUCR/L11 11 25 20 13 18 250 0° -5,7°
l1
A25T-SDUCR/L11 11 32 25 17 23 300 0° -3,4° DC .. 11T3 ..
Dmin A32T-SDUCR/L11 11 40 32 22 30 300 0° -3°
λs
93˚ A10K-SDUCR/L07-R 7 15 10 7 125 0° -7°

f E10M-SDUCR/L07-R 7 15 10 9 150 0° -7,2°
d1
l1 A12M-SDUCR/L07-R 7 18 12 9 150 0° -5°
DC .. 0702 ..
E12Q-SDUCR/L07-R 7 18 12 11 180 0° -5,3°
Dmin A16R-SDUCR/L07-R 7 20 16 11 200 0° -4,3°
λs E16R-SDUCR/L07-R 7 22 16 13 200 0° -3,6°

A20S-SDUCR/L11-R 11 25 20 13 250 0° -5,7°
E20S-SDUCR/L11-R 11 25 20 13 220 0° -6° DC .. 11T3 ..
E25T-SDUCR/L11-R 11 32 25 17 270 0° -3°
Ordering example, right-hand tool: A10K-SDUCR07/ordering example, left-hand tool: A10K-SDUCL07

Dmin [mm] 13–22 25 32
A 42 D1 A 238 A 261 A 267

ISO turning
A1
A...-SDUC...-X
Walter Turn
– Reverse copy boring bar
7°
≤ 30°
DC . .
Tool Dmin d1 f h l1 l20

d1 A16R-SDUCR/L07-X 7 22 16 13 15 200 212,2 0° -4°

A20S-SDUCR/L07-X 7 27 20 15 18 250 262,2 0° -2° DC .. 0702 ..
f
A25T-SDUCR/L07-X 7 33 25 18 23 300 312,2 0° -1°
X1 h A32T-SDUCR/L11-X 11 40 32 22 30 300 316,7 0° -8° DC .. 11T3 ..
l1
l20
93˚
Dmin
λs

Ordering example, right-hand tool: A16R-SDUCR07-X/ordering example, left-hand tool: A16R-SDUCL07-X
Assembly parts
Type DC .. 0702 .. DC .. 11T3 ..
Shim AP315-DC1108
A 42 D1 A 238 A 261 A 267

ISO turning
A1
A...-SSKC
Walter Turn
75° 7°
SC . .
Tool Dmin d1 f h l1
d1
A16R-SSKCR/L09 9 20 16 11 15 200 0° -8,9°
SC .. 09T3 ..
A20S-SSKCR/L09 9 25 20 13 18 250 0° -6,0°
75°
f A25T-SSKCR/L12 12 32 25 17 23 300 0° -4,7°
SC .. 1204 ..
h A32T-SSKCR/L12 12 40 32 22 30 300 0° -9,2°
l1
Dmin
λs
Measured with master insert: SC .. 09T308/SC .. 120408

Ordering example, right-hand tool: A16R-SSKCR09/ordering example, left-hand tool: A16R-SSKCL09
Assembly parts Type SC .. 09T3 .. SC .. 1204 .. SC .. 1204 ..

Dmin [mm] 20–25 32 40
Shim AP319-SC1212
Torx key FS1465 (Torx 15IP / SW 3,5) FS1496 (Torx 15IP / SW 4) FS1496 (Torx 15IP / SW 4)
A 48 D1 A 238 A 261 A 267

ISO turning
A1
A...-STFC / E...-STFC
Walter Turn
91°
7°
TC . .
Tool Dmin d1 f h l1
d1 A06F-STFCR/L06 6 8,5 6 4,5 5 80 0° -12,2°

TC .. 06T1 ..
A08H-STFCR/L06 6 11 8 5,9 7 100 0° -10,2°
91˚
f A10K-STFCR/L09 9 13 10 7 9 125 0° -9,2° TC .. 0902 ..
h A12M-STFCR/L11 11 16 12 9 11 150 0° -6,7°
l1
A16R-STFCR/L11 11 20 16 11 15 200 0° -4,5° TC .. 1102 ..
Dmin A20S-STFCR/L11 11 25 20 13 18 250 0° -2,8°
A25T-STFCR/L16 16 32 25 17 23 300 0° -3,4°
λs TC .. 16T3 ..
A32T-STFCR/L16 16 40 32 22 30 300 0° -7,9°
91˚
A06F-STFCR/L06-R 6 8,5 6 4,5 80 0° -12,2°
f E06H-STFCR/L06-R 6 8,5 6 4,5 100 0° -12,2°
d1 TC .. 06T1 ..
A08H-STFCR/L06-R 6 11 8 5,9 100 0° -10,2°
l1
E08K-STFCR/L06-R 6 11 8 5,9 125 0° -10,2°
Dmin A10K-STFCR/L09-R 9 13 10 7 125 0° -9,2°
E10M-STFCR/L09-R 9 13 10 7 150 0° -9,2° TC .. 0902 ..
λs
E12Q-STFCR/L09-R 9 16 12 9 180 0° -6,7°
A12M-STFCR/L11-R 11 16 12 9 150 0° -6,5°
A16R-STFCR/L11-R 11 20 16 11 200 0° -4,5°
TC .. 1102 ..
E16R-STFCR/L11-R 11 20 16 11 200 0° -4°
E20S-STFCR/L11-R 11 25 20 13 220 0° -3°
E25T-STFCR/L16-R 16 32 25 17 270 0° -3° TC .. 16T3 ..
Measured with master insert: TC .. 06T102 / TC .. 090204 / TC .. 110204 / TC .. 16T308
Ordering example, right-hand tool: A06F-STFCR06/ordering example, left-hand tool: A06F-STFCL06
Assembly parts Type TC .. 06T1 .. TC .. 06T1 .. TC .. 0902 .. TC .. 1102 .. TC .. 1102 .. TC .. 16T3 .. TC .. 16T3 ..
Dmin [mm] 8,5 11 13–16 16 20–25 32 40
Clamping screw for FS2147 FS2148 FS2149 FS2067 FS2061 FS2063 FS2060
indexable insert (Torx 6IP) (Torx 6IP) (Torx 7IP) (Torx 7IP) (Torx 7IP) (Torx 15IP) (Torx 15IP)
Tightening torque 0,5 Nm 0,5 Nm 0,9 Nm 0,9 Nm 0,9 Nm 3,0 Nm 3,0 Nm
AP317-TC1612
Shim for radius
r ≤ 1,2 mm
FS2068
Screw for shim
(SW 3,5)
FS1465 FS1465
FS2146 FS2146 FS1490 FS1490 FS1490
SW 3,5) SW 3,5)
A 51 D1 A 238 A 261 A 267

ISO turning
A1
A...-SVQB
Walter Turn
107°30‘
5° 7°
≤ 35°
VB . . VC . .
Tool Dmin d1 f h l1
d1 A16R-SVQBR/L11 11 22 16 13 15 200 0° -6,9°

VB .. 1103 ..
107°30' A20S-SVQBR/L11 11 27 20 15 18 250 0° -5°
VC .. 1103 ..
f A25T-SVQBR/L11 11 33 25 18 23 300 0° -3,5°
h A32T-SVQBR/L16 16 40 32 22 30 300 0° -10,9° VB .. 1604 ..
l1
A40T-SVQBR/L16 16 50 40 27 37 300 0° -7,9° VC .. 1604 ..
Dmin
λs
107˚30' A16R-SVQBR/L11-R 11 22 16 13 200 0° -6,9° VB .. 1103 ..

f A20S-SVQBR/L11-R 11 27 20 15 250 0° -5,0° VC .. 1103 ..
d1
l1
Dmin
λs

Ordering example, right-hand tool: A16R-SVQBR11/ordering example, left-hand tool: A16R-SVQBL11

Type VC .. 1103 .. VC .. 1604 ..
Shim AP316-VB1608
A 55 D1 A 238 A 261 A 267

ISO turning
A1
A...-PVQB
Walter Turn
107°30‘
5° 7°
≤ 35°
VB . . VC . .
Tool Dmin d1 f l1
Designation mm mm mm mm γ λs Type
107°30' A20Q-PVQBR/L11 11 25 20 13 180 0° -6° VB .. 1103 ..
f A25R-PVQBR/L11 11 32 25 17 200 0° -6° VC .. 1103 ..
d1
A32S-PVQBR/L16 16 40 32 22 250 0° -8° VB .. 1604 ..
l1
A40T-PVQBR/L16 16 50 40 27 300 0° -8° VC .. 1604 ..
Dmin
λs

Ordering example, right-hand tool: A20Q-PVQBR11/ordering example, left-hand tool: A20Q-PVQBL11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

Dmin [mm] 25–32 40 50
Shim AP153
Shim pin RS101
A 55 D1 A 238 A 261 A 267

ISO turning
A1
A...-SVUB
Walter Turn
93°
5° 7°
≤ 50°
VB . . VC . .
Tool Dmin d1 f h l1
d1 A16R-SVUBR/L11 11 22 16 13 15 200 0° -6,5°

VB .. 1103 ..
A20S-SVUBR/L11 11 27 20 15 18 250 0° -4,7°
93˚ VC .. 1103 ..
f A25T-SVUBR/L11 11 33 25 18 23 300 0° -3,3°
h A32T-SVUBR/L16 16 40 32 22 30 300 0° -9,8° VB .. 1604 ..
l1
A40T-SVUBR/L16 16 50 40 27 37 300 0° -6,9° VC .. 1604 ..
Dmin
λs
93˚
A16R-SVUBR/L11-R 11 22 16 13 200 0° -6,5° VB .. 1103 ..
f A20S-SVUBR/L11-R 11 27 20 15 250 0° -4,6° VC .. 1103 ..
d1
l1
Dmin
λs

Ordering example, right-hand tool: A16R-SVUBR11/ordering example, left-hand tool: A16R-SVUBL11

Type VC .. 1103 .. VC .. 1604 ..
Shim AP316-VB1608
A 55 D1 A 238 A 261 A 267

ISO turning
A1
A...-PVUB
Walter Turn
93°
5° 7°
≤ 50°
VB . . VC . .
Tool Dmin d1 f l1
Designation mm mm mm mm γ λs Type
93˚
A20Q-PVUBR/L11 11 25 20 13 180 0° -6° VB .. 1103 ..
f A25R-PVUBR/L11 11 32 25 17 200 0° -6° VC .. 1103 ..
d1
A32S-PVUBR/L16 16 40 32 22 250 0° -8° VB .. 1604 ..
l1
A40T-PVUBR/L16 16 50 40 27 300 0° -8° VC .. 1604 ..
Dmin
λs

Ordering example, right-hand tool: A20Q-PVUBR11/ordering example, left-hand tool: A20Q-PVUBL11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

Dmin [mm] 25–32 40 50
Shim AP153
Shim pin RS101
A 55 D1 A 238 A 261 A 267

ISO turning
A1
A...-SWLC
Walter Turn
95°
7°
WC . .
Tool Dmin d1 f h l1
d1 A10K-SWLCR/L04 4 12 10 7 9 125 0° -10°
95˚
A12M-SWLCR/L04 4 16 12 9 11 150 0° -7° WC .. 0402 ..
f A16R-SWLCR/L04 4 20 16 11 15 200 0° -5°
h A20S-SWLCR/L06 6 25 20 13 18 250 0° -6°
l1
A25T-SWLCR/L06 6 32 25 17 23 300 0° -3,5° WC .. 06T3 ..
Dmin A32T-SWLCR/L06 6 40 32 22 30 300 0° -5,5°
A25T-SWLCR/L08 8 32 25 17 23 300 0° -4°
λs WC .. 0804 ..
A32T-SWLCR/L08 8 40 32 22 30 300 0° -9°
95˚ A10K-SWLCR/L04-R 4 13 10 7 125 0° -10°

f A12M-SWLCR/L04-R 4 16 12 9 150 0° -7° WC .. 0402 ..
d1
A16R-SWLCR/L04-R 4 20 16 11 200 0° -5°
l1
A20S-SWLCR/L06-R 6 25 20 13 250 0° -6° WC .. 06T3 ..
Dmin
λs
Measured with master insert: WC .. 040204 / WC .. 06T308 / WC .. 080408

Ordering example, right-hand tool: A10K-SWLCR04/ordering example, left-hand tool: A10K-SWLCL04
Assembly parts Type WC .. 0402 .. WC .. 06T3 .. WC .. 06T3 .. WC .. 0804 .. WC .. 0804 ..

Dmin [mm] 12–20 25–32 40 32 40
FS2067 FS2062 FS2063 FS2064 FS2065
Tightening torque
0,9 Nm 3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm
Shim AP318-WC0608 AP320-WC0812
FS1465 FS1465 FS1496 FS1496

FS1490
(Torx 7IP)
SW 3,5) SW 3,5) SW 4) SW 4)
A 58 D1 A 238 A 261 A 267

ISO turning
A1
Boring bar adaptor
AK600
Walter Turn
– With Weldon shank in accordance with DIN 9766

– Self-centring for cylindrical round shank
Tool d1 d11 l1 l4
Parallel shank with surface AK600.25.061.06 25 6 61 5 0,2
in accordance with ISO 9766
AK600.25.061.08 25 8 61 5 0,2
AK600.25.061.10 25 10 61 5 0,2
d11 d1 AK600.25.061.12 25 12 61 5 0,1

AK600.25.061.16 25 16 61 5 0,2
l4 AK600.32.085.06 32 6 85 5 0,6
l1
AK600.32.085.08 32 8 85 5 0,5
AK600.32.085.10 32 10 85 5 0,5
AK600.32.085.12 32 12 85 5 0,5
AK600.32.085.16 32 16 85 5 0,4
AK600.32.085.20 32 20 85 5 0,3
AK600.40.105.06 40 6 105 5 1,0
AK600.40.105.08 40 8 105 5 1,0
AK600.40.105.10 40 10 105 5 0,9
AK600.40.105.12 40 12 105 5 0,9
AK600.40.105.16 40 16 105 5 0,9
AK600.40.105.20 40 20 105 5 0,8
AK600.40.105.25 40 25 105 5 0,7
Note: Groove for self-centring is present on all Walter Turn boring bars with fully rounded shank (-R) dia. 6-25 mm.
D1 A 267 A 191

ISO turning
A1
C...-DCLN
Walter Turn
– Walter Capto™
95°
CN . . CN . .
Tool Dmin d2 f l4 l16

Designation d1 mm mm mm mm mm γ λs Type
Walter Capto™ in accordance C4-DCLNR/L-17090-12 12 C4 32 25 17 90 68 -6° -12°
with ISO 26623
d2 C5-DCLNR/L-17090-12 12 C5 32 25 17 90 66 -6° -12° CN .. 1204 ..
95˚ C6-DCLNR/L-17100-12 12 C6 32 25 17 100 72 -6° -12°

d1
f C6-DCLNR/L-27140-16 16 C6 50 40 27 140 114 -6° -16° CN .. 1606 ..
l16
l4
Dmin
λs

Ordering example, right-hand tool: C4-DCLNR-17090-12/ordering example, left-hand tool: C4-DCLNL-17090-12
Assembly parts
Type CN .. 1204 .. CN .. 1606 ..

Clamp PK241 PK242

Pin RS117 RS117
Accessories
Type CN .. 1204 .. CN .. 1606 ..
Clamp set
PK241 SET PK242 SET
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 20 D1 A 234 A 261 A 262

ISO turning
A1
C...-PCLN
Walter Turn
– Walter Capto™
95°
CN . . CN . .

Walter Capto™ in accordance C3-PCLNR/L-17090-12 12 C3 32 25 17 90 75 -6° -11°
with ISO 26623
d2 C3-PCLNR/L-22096-12 12 C3 40 32 22 96 82 -6° -11°
C4-PCLNR/L-17090-12 12 C4 32 25 17 90 69 -6° -11°
95˚
d1
f C4-PCLNR/L-22110-12 12 C4 40 32 22 110 89 -6° -11°
l16 C4-PCLNR/L-27080-12 12 C4 50 40 27 80 60 -6° -10°

l4 C4-PCLNR/L-27120-12 12 C4 50 40 27 120 100 -6° -11°
CN .. 1204 ..
C5-PCLNR/L-17090-12 12 C5 32 25 17 90 67 -6° -11°
Dmin
C5-PCLNR/L-22110-12 12 C5 40 32 22 110 88 -6° -11°
λs C5-PCLNR/L-27140-12 12 C5 50 40 27 140 119 -6° -10°
C5-PCLNR/L-35100-12 12 C5 63 50 35 100 81 -6° -7°
C6-PCLNR/L-17100-12 12 C6 32 25 17 100 74 -6° -11°
C6-PCLNR/L-22110-12 12 C6 40 32 22 110 84 -6° -11°
C5-PCLNR/L-35150-16 16 C5 63 50 35 150 131 -6° -11°
C6-PCLNR/L-27140-16 16 C6 50 40 27 140 115 -6° -11° CN .. 1606 ..
C6-PCLNR/L-35175-16 16 C6 63 50 35 175 152 -6° -11°
Ordering example, right-hand tool: C3-PCLNR-17090-12/ordering example, left-hand tool: C3-PCLNL-17090-12

Dmin [mm] 32 40–63 50–63

Accessories
Type CN .. 1204 .. CN .. 1606 ..
A 20 D1 A 234 A 261

ISO turning
A1
C...-DDUN
Walter Turn
– Walter Capto™
93°
≤ 27°
DN . .

Walter Capto™ in accordance C4-DDUNR/L-17090-11 11 C4 32 25 17 90 68 -6° -12°
with ISO 26623 DN .. 1104 ..
d2 C5-DDUNR/L-17090-11 11 C5 32 25 17 90 66 -6° -12°
93˚ C4-DDUNR/L-27080-15 15 C4 50 40 27 80 59 -6° -11°

d1
f C5-DDUNR/L-27140-15 15 C5 50 40 27 140 118 -6° -11° DN .. 1506 ..
l16 C6-DDUNR/L-27140-15 15 C6 50 40 27 140 114 -6° -11°
l4
Dmin
λs

Ordering example, right-hand tool: C4-DDUNR-17090-11/ordering example, left-hand tool: C4-DDUNL-17090-11
Assembly parts
Type DN .. 1104 .. DN .. 1506 ..

Clamp PK240 PK241

Pin RS116 RS117
Accessories
Type DN .. 1104 .. DN .. 1506 ..
Clamp set
PK240 SET PK241 SET
Carbide clamp set

PK245 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
Shim for DN .. 1504 .. AP304-DN1504
A 24 D1 A 234 A 261 A 262

ISO turning
A1
C...-PDUN
Walter Turn
– Walter Capto™
93°
≤ 27°
DN . . DN . .

Walter Capto™ in accordance C3-PDUNR/L-17090-11 11 C3 32 25 17 90 75 -6° -11°
with ISO 26623
d2 C3-PDUNR/L-22064-11 11 C3 40 32 22 64 49 -6° -10°
C3-PDUNR/L-22096-11 11 C3 40 32 22 96 81 -6° -10°
93˚ d1
C4-PDUNR/L-17090-11 11 C4 32 25 17 90 69 -6° -11°
f DN .. 1104 ..
C4-PDUNR/L-22110-11 11 C4 40 32 22 110 89 -6° -10°
l16
l4 C5-PDUNR/L-17090-11 11 C5 32 25 17 90 67 -6° -11°
C5-PDUNR/L-22110-11 11 C5 40 32 22 110 88 -6° -10°
Dmin
C6-PDUNR/L-17100-11 11 C6 32 25 17 100 74 -6° -11°
λs C4-PDUNR/L-27080-15 15 C4 50 40 27 80 60 -6° -11°
C4-PDUNR/L-27120-15 15 C4 50 40 27 120 100 -6° -11°
C5-PDUNR/L-27140-15 15 C5 50 40 27 140 119 -6° -11°
C5-PDUNR/L-35100-15 15 C5 63 50 35 100 81 -6° -10° DN .. 1506 ..
C5-PDUNR/L-35150-15 15 C5 63 50 35 150 131 -6° -10°
C6-PDUNR/L-27140-15 15 C6 50 40 27 140 115 -6° -11°
C6-PDUNR/L-35175-15 15 C6 63 50 35 175 152 -6° -10°
Ordering example, right-hand tool: C3-PDUNR-17090-11/ordering example, left-hand tool: C3-PDUNL-17090-11

Dmin [mm] 32 40 50–63

Accessories
Type DN .. 1104 .. DN .. 1506 ..
Shim for DN .. 1504 .. AP357-DN1508
Shim for DN .. 1504 .. AP357-DN1516
A 24 D1 A 234 A 261

ISO turning
A1
C...-PSKN
Walter Turn
– Walter Capto™
75°
SN . . SN . .

Walter Capto™ in accordance C4-PSKNR/L-17090-12 12 C4 32 25 17 90 69 -6° -11°
with ISO 26623
d2 C5-PSKNR/L-17090-12 12 C5 32 25 17 90 67 -6° -11° SN .. 1204 ..
C5-PSKNR/L-27140-12 12 C5 50 40 27 140 119 -6° -10°
75˚
d1
f C6-PSKNR/L-35175-15 15 C6 63 50 35 175 152 -6° -9° SN .. 1506 ..
l16
l4
Dmin
λs

Ordering example, right-hand tool: C4-PSKNR-17090-12/ordering example, left-hand tool: C4-PSKNL-17090-12

Dmin [mm] 32 50 63

Accessories
Type SN .. 1204 .. SN .. 1506 ..
A 27 D1 A 234 A 261

ISO turning
A1
C...-PTFN
Walter Turn
– Walter Capto™
91°
TN . . TN . .

Walter Capto™ in accordance C4-PTFNR/L-17090-16W 16 C4 32 25 17 90 69 -6° -13°
with ISO 26623
d2 C4-PTFNR/L-22110-16W 16 C4 40 32 22 110 89 -6° -12°
C4-PTFNR/L-27120-16W 16 C4 50 40 27 120 100 -6° -11°
91˚
d1
f C5-PTFNR/L-17090-16W 16 C5 32 25 17 90 67 -6° -13° TN .. 1604 ..
l16 C5-PTFNR/L-22110-16W 16 C5 40 32 22 110 88 -6° -12°

l4 C5-PTFNR/L-27140-16W 16 C5 50 40 27 140 119 -6° -11°
C6-PTFNR/L-22110-16W 16 C6 40 32 22 110 84 -6° -12°
Dmin
C5-PTFNR/L-35150-22W 22 C5 63 50 35 150 131 -6° -11°
λs C6-PTFNR/L-27140-22W 22 C6 50 40 27 140 115 -6° -11° TN .. 2204 ..
C6-PTFNR/L-35175-22W 22 C6 63 50 35 175 152 -6° -10°
Ordering example, right-hand tool: C4-PTFNR-17090-16W/ordering example, left-hand tool: C4-PTFNL-17090-16W
Assembly parts Type TN .. 1604 .. TN .. 1604 .. TN .. 2204 ..

Dmin [mm] 32 40–50 50–63
Shim AP147 AP148
Wedge set FK307 (SW 3) FK308 (SW 3) FK309 (SW 4)
Screw FS1156 (Torx 9IP) FS1156 (Torx 9IP) FS1158 (Torx 15IP)
Allen key ISO2936-3 (SW 3) ISO2936-3 (SW 3) ISO2936-4 (SW 4)
A 30 D1 A 234 A 261

ISO turning
A1
C...-DWLN
Walter Turn
– Walter Capto™
95°
WN . . WN . .

Walter Capto™ in accordance C4-DWLNR/L-13075-06 6 C4 27 20 13 75 52 -6° -17° WN .. 0604 ..
with ISO 26623
d2 C4-DWLNR/L-17090-08 8 C4 33 25 17 90 68 -6° -12°
WN .. 0804 ..
95˚ C5-DWLNR/L-17090-08 8 C5 33 25 17 90 66 -6° -12°
d1
f C6-DWLNR/L-27140-10 10 C6 50 40 27 140 114 -6° -16° WN .. 1006 ..
l16
l4
Dmin
λs

Ordering example, right-hand tool: C4-DWLNR-13075-06/ordering example, left-hand tool: C4-DWLNL-13075-06
Assembly parts
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP / SW 3,5) FS1464 (Torx 20IP)
Accessories
Type WN .. 0604 .. WN .. 0804 .. WN .. 1006 ..
Clamp set
Carbide clamp set

PK245 SET PK246 SET
Insert with hole
Carbide clamp set

PK254 SET
Insert without hole
A 34 D1 A 234 A 261 A 262

ISO turning
A1
C...-PWLN
Walter Turn
– Walter Capto™
95°
WN . . WN . .

Walter Capto™ in accordance C3-PWLNR/L-13075-06 6 C3 25 20 13 75 58 -6° -15°
with ISO 26623
d2 C4-PWLNR/L-13075-06 6 C4 25 20 13 75 52 -6° -15°
WN .. 0604 ..
C4-PWLNR/L-17090-06 6 C4 32 25 17 90 68 -6° -10°
95˚ d1
f
C5-PWLNR/L-22110-06 6 C5 40 32 22 110 88 -6° -12°
C3-PWLNR/L-17090-08 8 C3 32 25 17 90 74 -6° -10°
l16
l4 C4-PWLNR/L-17090-08 8 C4 32 25 17 90 67 -6° -10°
C4-PWLNR/L-22110-08 8 C4 40 32 22 110 89 -6° -10°
Dmin C4-PWLNR/L-27120-08 8 C4 50 40 27 120 100 -6° -10°
C5-PWLNR/L-17090-08 8 C5 32 25 17 90 67 -6° -10° WN .. 0804 ..
λs
C5-PWLNR/L-22110-08 8 C5 40 32 22 110 88 -6° -14°
C5-PWLNR/L-27140-08 8 C5 50 40 27 140 119 -6° -10°
C6-PWLNR/L-27140-08 8 C6 50 40 27 140 115 -6° -10°
C6-PWLNR/L-35175-08 8 C6 63 50 35 175 152 -6° -10°
Measured with master insert: WN .. 060408 / WN .. 080408
Ordering example, right-hand tool: C3-PWLNR-13075-06/ordering example, left-hand tool: C3-PWLNL-13075-06
Assembly parts Type WN .. 0604 .. WN .. 0604 .. WN .. 0804 .. WN .. 0804 .. WN .. 0804 ..

Dmin [mm] 25–32 40 32 40 50–63
Clamping screw FS331 (SW 2) FS351 (SW 2,5) FS332 (SW 2,5) FS2129 (SW 3) FS352 (SW 3)
ISO2936-2 ISO2936-2,5 ISO2936-2,5 ISO2936-3 ISO2936-3

Allen key
(SW 2) (SW 2,5) (SW 2,5) (SW 3) (SW 3)
Accessories
Type WN .. 0804 ..
Shim AP170-WN0808
A 34 D1 A 234 A 261

ISO turning
A1
C...-SCLC
Walter Turn
– Walter Capto™
95°
7°
CC . .

Walter Capto™ in accordance C3-SCLCR/L-11065-09 9 C3 20 16 11 65 48 0° -8°
with ISO 26623
d2 C3-SCLCR/L-13075-09 9 C3 25 20 13 75 58 0° -6°
C3-SCLCR/L-17090-09 9 C3 32 25 17 90 74 0° -3°
95˚
d1
f C4-SCLCR/L-11070-09 9 C4 20 16 11 70 47 0° -8°
l16 C4-SCLCR/L-13080-09 9 C4 25 20 13 80 57 0° -6°
l4 C4-SCLCR/L-17090-09 9 C4 32 25 17 90 68 0° -3° CC .. 09T3 ..
C4-SCLCR/L-27080-09 9 C4 50 40 27 80 60 0° -6°
Dmin
C5-SCLCR/L-11070-09 9 C5 20 16 11 70 46 0° -8°
λs C5-SCLCR/L-13080-09 9 C5 25 20 13 80 56 0° -6°
C5-SCLCR/L-17090-09 9 C5 32 25 17 90 67 0° -3°
C5-SCLCR/L-35100-09 9 C5 63 50 35 100 80 0° -5°
C4-SCLCR/L-17090-12 12 C4 32 25 17 90 68 0° -5°
C4-SCLCR/L-22110-12 12 C4 40 32 22 110 89 0° -10°
C4-SCLCR/L-27080-12 12 C4 50 40 27 80 60 0° -7°
CC .. 1204 ..
C5-SCLCR/L-17090-12 12 C5 32 25 17 90 67 0° -5°
C5-SCLCR/L-22110-12 12 C5 40 32 22 110 88 0° -10°
C5-SCLCR/L-27140-12 12 C5 50 40 27 140 119 0° -7°
Measured with master insert: CC .. 09T308 / CC .. 120408
Ordering example, right-hand tool: C3-SCLCR-11065-09/ordering example, left-hand tool: C3-SCLCL-11065-09
Assembly parts Type CC .. 09T3 .. CC .. 09T3 .. CC .. 09T3 .. CC .. 1204 .. CC .. 1204 ..

Dmin [mm] 20–25 32 50–63 32 40–50
FS2062 FS2063 FS2060 FS2064 FS2065
Tightening torque
3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm 3,0 Nm
Shim AP313-CC0908 AP314-CC1212
FS1465 FS1465 FS1465 FS1496 FS1496

Torx key (Torx 15IP / (Torx 15IP / (Torx 15IP / (Torx 15IP / (Torx 15IP /
SW 3,5) SW 3,5) SW 3,5) SW 4) SW 4)
A 37 D1 A 238 A 261

ISO turning
A1
C...-SDUC
Walter Turn
– Walter Capto™
93°
7°
≤ 30°
DC . .

Walter Capto™ in accordance C3-SDUCR/L-11065-07 7 C3 20 16 11 65 48 0° -4°
with ISO 26623
d2 C4-SDUCR/L-11070-07 7 C4 20 16 11 70 47 0° -4° DC .. 0702 ..
C5-SDUCR/L-11070-07 7 C5 20 16 11 70 46 0° -4°
93˚ d1
C3-SDUCR/L-13075-11 11 C3 25 20 13 75 58 0° -6°
f
C3-SDUCR/L-17090-11 11 C3 32 25 17 90 73 0° -3°
l16
l4 C4-SDUCR/L-13080-11 11 C4 25 20 13 80 57 0° -6°
C4-SDUCR/L-17090-11 11 C4 32 25 17 90 68 0° -3°
Dmin C4-SDUCR/L-22110-11 11 C4 40 32 22 110 89 0° -8° DC .. 11T3 ..
C4-SDUCR/L-27080-11 11 C4 50 40 27 80 60 0° -5°
λs
C5-SDUCR/L-13080-11 11 C5 25 20 13 80 56 0° -6°
C5-SDUCR/L-17090-11 11 C5 32 25 17 90 67 0° -3°
C5-SDUCR/L-22110-11 11 C5 40 32 22 110 88 0° -8°
Ordering example, right-hand tool: C3-SDUCR-11065-07/ordering example, left-hand tool: C3-SDUCL-11065-07
Assembly parts Type DC .. 0702 .. DC .. 11T3 .. DC .. 11T3 .. DC .. 11T3 ..

Dmin [mm] 20 25 32 40–50
Clamping screw for indexable insert FS2061 (Torx 7IP) FS2062 (Torx 15IP) FS2063 (Torx 15IP) FS2060 (Torx 15IP)
Shim AP315-DC1108
FS1465 (Torx 15IP / FS1465 (Torx 15IP / FS1465 (Torx 15IP /

SW 3,5) SW 3,5) SW 3,5)
A 42 D1 A 238 A 261

ISO turning
A1
C...-STFC
Walter Turn
– Walter Capto™
91°
7°
TC . .

Walter Capto™ in accordance C3-STFCR/L-11065-11 11 C3 20 16 11 65 48 0° -12°
with ISO 26623
d2 C4-STFCR/L-11070-11 11 C4 20 16 11 70 47 0° -12°
C4-STFCR/L-13080-11 11 C4 25 20 13 80 57 0° -10° TC .. 1102 ..
d1
f 91˚ C5-STFCR/L-11070-11 11 C5 20 16 11 70 46 0° -12°
l16 C5-STFCR/L-13080-11 11 C5 25 20 13 80 56 0° -3°
l4
C4-STFCR/L-17090-16 16 C4 32 25 17 90 68 0° -3°
Dmin
C4-STFCR/L-22110-16 16 C4 40 32 22 110 89 0° -8°
TC .. 16T3 ..
C5-STFCR/L-17090-16 16 C5 32 25 17 90 67 0° -3°
λs
C5-STFCR/L-22110-16 16 C5 40 32 22 110 88 0° -8°
Ordering example, right-hand tool: C3-STFCR-11065-11/ordering example, left-hand tool: C3-STFCL-11065-11
Assembly parts Type TC .. 1102 .. TC .. 16T3 .. TC .. 16T3 ..

Dmin [mm] 20–25 32 40
Shim AP317-TC1612
A 51 D1 A 238 A 261

ISO turning
A1
C...-SVQB
Walter Turn
– Walter Capto™
107°30‘
5° 7°
≤ 35°
VB . . VC . .

Walter Capto™ in accordance C3-SVQBR/L-13070-11 11 C3 22 16 13 70 53 0° -7°
with ISO 26623
d2 C3-SVQBR/L-15080-11 11 C3 27 20 15 80 63 0° -5°
VB .. 1103 ..
C4-SVQBR/L-13070-11 11 C4 25 20 13 70 47 0° -6°
107˚30' VC .. 1103 ..
d1
f C4-SVQBR/L-15080-11 11 C4 27 20 15 80 57 0° -5°
l16
C5-SVQBR/L-15080-11 11 C5 27 20 15 80 56 0° -5°
l4 C3-SVQBR/L-18090-16 16 C3 33 25 18 90 74 0° -7°
C3-SVQBR/L-22096-16 16 C3 40 32 22 96 81 0° -11°
Dmin
C4-SVQBR/L-18090-16 16 C4 33 25 18 90 68 0° -7°
λs C4-SVQBR/L-22110-16 16 C4 40 32 22 110 89 0° -11°
C4-SVQBR/L-27080-16 16 C4 50 40 27 80 60 0° -8°
C4-SVQBR/L-27120-16 16 C4 50 40 27 120 100 0° -8°
C5-SVQBR/L-18090-16 16 C5 33 25 18 90 67 0° -7° VB .. 1604 ..
C5-SVQBR/L-22110-16 16 C5 40 32 22 110 88 0° -11° VC .. 1604 ..
C5-SVQBR/L-27140-16 16 C5 50 40 27 140 119 0° -8°

C5-SVQBR/L-35100-16 16 C5 63 50 35 100 80 0° -5°
C5-SVQBR/L-35150-16 16 C5 63 50 35 150 130 0° -5°
C6-SVQBR/L-22120-16 16 C6 40 32 22 120 94 0° -11°
C6-SVQBR/L-27145-16 16 C6 50 40 27 145 120 0° -8°
C6-SVQBR/L-35175-16 16 C6 63 50 35 175 151 0° -5°
Ordering example, right-hand tool: C3-SVQBR-13070-11/ordering example, left-hand tool: C3-SVQBL-13070-11
VB .. 1103 .. VB .. 1604 .. VB .. 1604 ..

Dmin [mm] 22–27 33 40–63
Type VC .. 1604 ..
Shim AP330-VB1612
A 55 D1 A 238 A 261

ISO turning
A1

Carbide grades
= Cutting data for wet machining Cutting material grades

Starting values
HC
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group

and code letters
N/mm2
0,10 0,20 0,30
C ≤ 0.25% Annealed 125 430 P1 CC C 530 510 480

Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 360 340 320
Annealed 175 590 P7 CC C 380 370 350
P Low-alloyed steel
Annealed 200 680 P11 CC C 340 330 320
Ferritic/martensitic, annealed 200 680 P14 CC C
Stainless steel
Martensitic, heat-treated 330 1110 P15 CC C
Austenitic, quench hardened 200 680 M1 CC C
M Stainless steel Austenitic, precipitation hardened (PH) 300 1010 M2 CC C

Austenitic/ferritic, duplex 230 780 M3 CC C
Ferritic 200 400 K1 CC C 300 270 250

Malleable cast iron
Pearlitic 260 700 K2 CC C 260 230 210
Low tensile strength 180 200 K3 CC C 550 490 440
Grey cast iron
K High tensile strength/austenitic 245 350 K4 CC C 300 270 250
Ferritic 155 400 K5 CC C 320 290 260
Cast iron with spheroidal graphite
Pearlitic 265 700 K6 CC C 230 210 190
GGV (CGI) 230 400 K7 CC C
Not hardenable 30 – N1
Wrought aluminium alloys
Hardenable, hardened 100 340 N2
≤ 12% Si, not hardenable 75 260 N3
Cast aluminium alloys ≤ 12% Si, hardenable, hardened 90 310 N4
> 12% Si, not hardenable 130 450 N5
N Magnesium-based alloys 70 250 N6
Non-alloyed, electrolytic copper 100 340 N7
Copper and copper alloys Brass, bronze, red brass 90 310 N8
(bronze/brass) Cu-alloys, short-chipping 110 380 N9
High-tensile, Ampco 300 1010 N10
Annealed 200 680 S1 CC C
Fe-based
Hardened 280 940 S2 CC C
Heat-resistant alloys Annealed 250 840 S3 CC C
Ni or Co base Hardened 350 1180 S4 CC C
Cast 320 1080 S5 CC C
S Pure titanium 200 680 S6 CC C
Titanium alloys α and β alloys, hardened 375 1260 S7 CC C
β alloys 410 1400 S8 CC C
Tungsten alloys 300 1010 S9
Molybdenum alloys 300 1010 S10
Hardened and tempered 50 HRC H1 C CC
Hardened steel Hardened and tempered 55 HRC H2 C CC
H Hardened and tempered 60 HRC H3 C CC
Hardened cast iron Hardened and tempered 55 HRC H4 C CC
Thermoplastics Without abrasive fillers O1
Thermosetting plastics Without abrasive fillers O2
Plastic, glass fibre reinforced GFRP O3
O Plastic, carbon fibre reinforced CFRP O4
Plastic, aramid fibre reinforced AFRP O5
Graphite (technical) 80 Shore O6
C C Recommended application (the specified cutting data is regarded as starting values for the recommended application)
C Possible application
Note:
If dry machining is possible, the tool life is reduced by 20-30% on average.
1
The classification of the machining groups can be found from page A 468 onwards.
A 234 Technical information – ISO turning

ISO turning
A1
The specified cutting data are average standard values.

For special applications, adjustment is recommended.
Cutting material grades
Starting values for cutting speed vc [m/min]
HC
WPP05S WPP10S WPP20S WPP30S WMP20S
f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev]
0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,30 0,50
540 420 310 530 400 310 450 330 270 380 260 220 290 200 170
430 310 250 420 300 240 350 250 190 300 200 160 230 150 120
330 250 220 320 250 210 260 210 170 220 180 130 170 140 110
370 260 210 350 250 200 300 210 160 250 160 130 190 120 100
270 210 200 270 200 190 220 160 150 180 120 100 140 100 80
510 360 290 490 350 280 410 290 220 350 230 180 270 180 140
400 280 250 380 280 240 320 240 190 260 190 170 200 140 130
240 190 170 230 180 160 190 140 120 150 100 80 130 80 60
180 120 100 170 120 100 140 100 80 100 70 50 80 60 40
90 80 80 60
360 220 170 340 240 160 290 200 120 220 160 90 170 120 80
260 140 110 240 140 120 190 120 90 120 90 70 100 70 60
80 70 70 60
280 220 200 230 190 150 180 150 110 210 180 150
200 140 120 160 110 80 120 80 70 140 110 100
260 210 130 250 190 120
160 140 150 130
170 150 110 160 140 100
320 210 160 280 220 160
270 170 120 240 180 110
580 340 240 510 260 190
320 220 150 240 180 110
340 240 180 260 190 140
240 180 150 190 140 110
320 200 290 190 160
90 60
70 50
70 50
60 40
50 30
70 45 40
40 30 25
HC = Coated carbide
Technical information – ISO turning A 235

ISO turning
A1

Carbide grades

Starting values
HC
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group
Overview of the main material groups WSM10 / WSM10S

and code letters
f [mm/rev]
N/mm2
0,10 0,30 0,50
C ≤ 0.25% Annealed 125 430 P1 CC C 270 250

C > 0.25... ≤ 0.55% Annealed 190 640 P2 CC C 210 190
C > 0.25... ≤ 0.55% Heat-treated 210 710 P3 CC C 180 160
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 180 160
C > 0.55% Heat-treated 300 1010 P5 CC C
Free cutting steel (short-chipping) Annealed 220 750 P6 CC C 240 220
Annealed 175 590 P7 CC C 170 150
P Low-alloyed steel
Heat-treated 285 960 P8 CC C
Annealed 200 680 P11 CC C 170 150

Hardened and tempered 300 1010 P12 CC C
Ferritic/martensitic, annealed 200 680 P14 CC C 200 180 150

Stainless steel
Martensitic, heat-treated 330 1110 P15 CC C 170 120 110
Austenitic, quench hardened 200 680 M1 CC C 260 210 130
M Stainless steel Austenitic, precipitation hardened (PH) 300 1010 M2 CC C 160 140
Austenitic/ferritic, duplex 230 780 M3 CC C 170 150 110
Ferritic 200 400 K1 CC C
Malleable cast iron
Pearlitic 260 700 K2 CC C
Low tensile strength 180 200 K3 CC C

Grey cast iron
K High tensile strength/austenitic 245 350 K4 CC C

Annealed 200 680 S1 CC C 100 65
Fe-based
Hardened 280 940 S2 CC C 80 55
Heat-resistant alloys Annealed 250 840 S3 CC C 80 55
Ni or Co base Hardened 350 1180 S4 CC C 70 45
Cast 320 1080 S5 CC C 60 35
Hardened and tempered 50 HRC – H1 C CC
Hardened steel Hardened and tempered 55 HRC – H2 C CC
H Hardened and tempered 60 HRC – H3 C CC
Hardened cast iron Hardened and tempered 55 HRC – H4 C CC
Note:
1

ISO turning
A1

HC HW
WSM20 / WSM20S WSM30 / WSM30S WKK10S WKK20S WKP30S WAK30 WS10
f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev]
0,10 0,30 0,50 0,10 0,30 0,50 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,40 0,60 0,10 0,30 0,50
230 220 220 200 530 400 310 290 200 170 290 200 170
180 160 160 150 420 300 250 230 150 120 230 150 120
150 130 130 110 320 250 210 170 140 110 170 140 110
140 130 130 120 360 250 210 190 120 100 190 120 100
270 200 190 140 100 80 140 100 80
200 180 180 160
140 120 120 100 260 200 180 200 140 130
230 180 160 130 80 60 130 80 60
150 120 100 80 60 40 80 60 40
70 60
130 110 110 90 270 220 170 170 120 80 170 120 80
170 140 130 100 70 60 100 70 60
80 70
190 170 140 170 150 120
140 110 100 110 100 80
240 170 110 200 140 90 200 140 90
140 120 110 90 110 90
150 130 90 130 110 70 130 110 70
370 260 180 300 200 150 240 160 130 240 160 130
330 220 140 260 160 110 200 120 90 200 120 90
620 410 300 550 320 230 490 250 180 490 250 180
390 260 180 300 210 140 230 170 110 230 170 110
410 300 230 320 230 170 250 180 130 250 180 130
300 230 180 230 170 140 180 130 110 180 130 110
320 200
90 60 80 50 90
70 50 60 40 70
70 50 60 30 70
60 40 50 30 60
50 30 40 20 50
200 180 140
70 45 40 90 55 45
40 30 25 55 35 30
220
55
45
35
45
HC = Coated carbide

ISO turning
A1
Cutting data for turning inserts – Positive basic shape

Carbide grades

Starting values
HC
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group

and code letters
f [mm/rev]
N/mm2
0,10 0,20 0,30
C ≤ 0.25% Annealed 125 430 P1 CC C 490 460 430

Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 350 330 320
Annealed 175 590 P7 CC C 360 330 320
P Low-alloyed steel
Annealed 200 680 P11 CC C 340 310 300
Stainless steel
Austenitic, quench hardened 200 680 M1 CC C
M Stainless steel Austenitic, precipitation hardened (PH) 300 1010 M2 CC C

Austenitic/ferritic, duplex 230 780 M3 CC C
Ferritic 200 400 K1 CC C 270 240 220

Malleable cast iron
Pearlitic 260 700 K2 CC C 230 200 180
Low tensile strength 180 200 K3 CC C 520 490 470
Grey cast iron
K High tensile strength/austenitic 245 350 K4 CC C 270 240 220
Ferritic 155 400 K5 CC C 290 260 240
Pearlitic 265 700 K6 CC C 200 170 150
Not hardenable 30 – N1 CC C
Hardenable, hardened 100 340 N2 CC C
≤ 12% Si, not hardenable 75 260 N3 CC C

Cast aluminium alloys ≤ 12% Si, hardenable, hardened 90 310 N4 CC C
Non-alloyed, electrolytic copper 100 340 N7 CC C
Copper and copper alloys Brass, bronze, red brass 90 310 N8 CC C

(bronze/brass) Cu-alloys, short-chipping 110 380 N9 CC C
Annealed 200 680 S1 CC C
Fe-based
Hardened 280 940 S2 CC C
Cast 320 1080 S5 CC C
Note:
1

ISO turning
A1

Starting values
HC
WPP10S WPP20S WPP30S WMP20S WSM10S WSM20S WSM30S
f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev]
0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40
490 430 370 410 370 310 390 360 260 300 200 170 250 240 230 210 200 190
390 350 280 330 300 230 310 280 210 240 160 130 200 180 170 150 150 140
290 260 240 230 210 190 190 160 150 170 140 110 160 150 130 120 120 100
350 320 310 290 270 250 240 210 200 210 130 100 170 150 140 120 120 110
230 200 190 190 160 150 150 120 100 140 100 80
450 420 410 380 350 330 320 280 260 240 220 200 220 200 180 160 160 140
360 330 320 310 280 260 230 210 190 210 150 130 160 130 120 100 110 80
200 170 160 160 140 120 120 100 70 130 80 60
120 100 90 100 80 60 80 50 40 80 50 40
80 60 60 50
340 310 300 280 250 230 210 190 170 190 130 80 160 140 130 100 100 80
210 190 170 170 140 120 140 110 80 100 70 60
70 60 60 50
300 270 260 210 190 170 160 140 120 220 190 160
120 100 90 100 90 70 90 60 50 120 100 90
220 200 130 210 190 120 220 200 130 200 180 110 180 140 90
160 140 150 130 160 140 140 120 110 90
170 150 110 160 140 100 170 150 110 150 130 80 130 110 70
280 250 230 250 220 200
240 210 190 210 180 160
530 490 450 480 450 430
280 250 230 210 180 160
300 270 250 230 200 180
210 180 160 160 130 110
280 230 210
90 70 100 70 90 70 70 50
70 60 80 60 70 60 50 40
70 60 80 60 70 60 50 30
60 50 70 50 60 50 40 30
50 40 60 40 50 40 30 20
70 50 40 70 50 40
40 30 25 40 30 25
HC = Coated carbide

ISO turning
A1
Cutting data for turning inserts – Positive basic shape

Carbide grades

Starting values
HC
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group
Overview of the main material groups WSM10

and code letters
f [mm/rev]
N/mm2
0,10 0,20 0,40
C ≤ 0.25% Annealed 125 430 P1 CC C 250 240

C > 0.25 to ≤ 0.55% Annealed 190 640 P2 CC C 200 180
C > 0.25 to ≤ 0.55% Heat-treated 210 710 P3 CC C 160 150
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 170 150
C > 0.55% Heat-treated 300 1010 P5 CC C
Annealed 175 590 P7 CC C 160 130
P Low-alloyed steel
Annealed 200 680 P11 CC C 160 140


Stainless steel
Austenitic, quench hardened 200 680 M1 CC C 220 200 130

Austenitic/ferritic, duplex 230 780 M3 CC C 170 150 110
Malleable cast iron

Grey cast iron



Annealed 200 680 S1 CC C 100 70
Fe-based
Cast 320 1080 S5 CC C 60 40
Note:
1

ISO turning
A1

Starting values
HC HW
WSM20 WSM21 WSM30 WKK10S WKK20S WXN10 WK1 WS10
f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev]
0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40 0,10 0,20 0,40
230 210 200 190 200 190 490 430 370

170 150 150 140 150 140 400 350 280
130 120 120 100 120 100 270 240 210
140 120 120 110 120 110 330 300 240
250 220 190
180 160 160 140 160 140 360 330 280
120 100 110 80 240 200 150
210 190 160
140 130 90
80 60
130 100 100 80 240 200 140
150 130 60
70 60
270 240 220
160 140 120
200 180 110 180 140 90 180 140 90 220 200
140 120 110 90 110 90 100 80
150 130 80 130 110 70 130 110 70 170 130
310 280 210 240 220 170
290 260 190 220 200 150
560 500 370 500 450 290
350 320 240 270 240 190
370 330 270 290 260 210
270 240 210 210 190 160
310 260 210
3000 2400 1800 2400 1800 1300
900 720 360 750 600 300
960 540 360 800 450 300
600 360 240 500 300 200
720 480 320 600 400 270

480 360 300 400 300 250
340 240 160 280 200 130
90 70 70 50 70 50 110 90 90
70 60 50 40 50 40 80 70 70
70 60 50 30 50 30 60 50 70
60 50 40 30 40 30 60 25 60
50 40 30 20 30 20 50 25 50
220 200 160 200 180 140
70 50 40 100 70 60 90 60 45
40 30 25 55 35 30
50
40
30
40
HC = Coated carbide

ISO turning
A1
Cutting data for turning inserts – Negative and positive basic shape
CBN/PCD/ceramic
= Cutting data for wet machining

Starting values
CBN
Tensile strength Rm
Brinell hardness HB
Machining group 1
BL
Material group
WCB30
Overview of the main material groups
and code letters
f [mm/rev]
N/mm2
0,05 0,15 0,20
C ≤ 0.25% Annealed 125 430 P1

C > 0.25 to ≤ 0.55% Annealed 190 640 P2
C > 0.25 to ≤ 0.55% Heat-treated 210 710 P3
Non-alloyed steel
C > 0.55% Annealed 190 640 P4
C > 0.55% Heat-treated 300 1010 P5
Free cutting steel (short-chipping) Annealed 220 750 P6
Annealed 175 590 P7
P Low-alloyed steel
Heat-treated 285 960 P8
Annealed 200 680 P11
Hardened and tempered 300 1010 P12
Hardened and tempered 380 1280 P13
Ferritic/martensitic, annealed 200 680 P14
Stainless steel
Martensitic, heat-treated 330 1110 P15
Austenitic, quench hardened 200 680 M1
M Stainless steel Austenitic, precipitation hardened (PH) 300 1010 M2
Austenitic/ferritic, duplex 230 780 M3
Malleable cast iron

Grey cast iron

GGV (CGI) 230 400 K7
Annealed 200 680 S1
Fe-based
Hardened 280 940 S2
Cast 320 1080 S5 CC C
S Pure titanium 200 680 S6
Titanium alloys α and β alloys, hardened 375 1260 S7
β alloys 410 1400 S8
Hardened and tempered 50 HRC – H1 C CC 220 180 160
Hardened steel Hardened and tempered 55 HRC – H2 C CC 200 160 110
H Hardened and tempered 60 HRC – H3 C CC 170 150 90
Hardened cast iron Hardened and tempered 55 HRC – H4 C CC 220 170 120
1

ISO turning
A1

Starting values
CBN PCD Ceramic
BH BH DP CN CN CR
WCB50 WCB80 WDN10 WSN10 WIS10 WWS20
f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev] f [mm/rev]
0,05 0,15 0,20 0,05 0,15 0,20 0,10 0,20 0,40 0,20 0,40 0,60 0,10 0,20 0,30 0,10 0,20 0,30
350 300 250 1500 1300 1000 CC 750 600 500

350 300 250 1300 1100 900 CC 650 500 400
350 300 200 1400 1200 800 CC 850 600 500
150 120 90 600 500 400 CC 650 500 400
400 300 200 CC 550 450 350
300 200 CC 550 450 350
CC 3000 2800 2200

CC 2000 1800 1400
CC 2200 2000 1600
CC 1800 1600 1200
CC 500 450 300
CC 1800 1600 1200
CC 1000 900 700
CC 700 650 500
CC 650 550 400
CC 400 300 150
140 C CC 410 340 280 390 320 240

140 C CC 320 250 190 320 250 190
140 C CC 250 220 180 250 220 180
CC 300 220 200
CC C 30 25 15
200 170 130 C CC 170 150 120

180 150 100 C CC 150 120 100
150 130 80 C CC 130 110 90
190 160 110 C CC 150 120 100
CC 1500 1200 800
CC 1500 1200 800
CC 1000 900 700
CC 800 700 500
CC 800 700 500
CC 400 300 150
BH = CBN with high CBN content


ISO turning
A1
Cutting tool material application charts – Turning
Carbide
Material groups Range of applications

P M K N S H O 01 10 20 30 40
05 15 25 35 45
Coating process
Stainless steel
Hard materials
cutting properties
NF metals
Cast iron
Walter
Other
Steel
grade Standard Coating Indexable

designation designation composition inserts example
HC – P 01 CC
TiCN + Al2O3
WPP01 CVD
(+ TiN)
HC – K 10 C
TiCN + Al2O3
WPP05S HC – P 05 CC CVD
(+ TiCN)
HC – P 10 CC
TiCN + Al2O3
WPP10S CVD
(+ TiCN)
HC – K 20 C
HC – P 20 CC
TiCN + Al2O3
WPP20S CVD
(+ TiCN)
HC – K 30 C
TiCN + Al2O3
WPP30S HC – P 30 CC CVD
(+ TiCN)
HC – M 20 CC
TiCN + Al2O3
WMP20S HC – P 25 CC CVD
(+ TiCN)
HC – S 20 C
HC – M 10 CC
TiAlN + Al2O3
WSM10S HC – S 10 CC PVD
(Al)
HC – P 10 C
HC – M 20 CC
TiAlN + Al2O3
(Al)
HC – P 20 C
HC – M 30 CC
TiAlN + Al2O3
(Al)
HC – P 30 C
HC – M 10 CC
TiAlN + Al2O3
WSM10 HC – S 10 CC PVD
(ZrCN)
HC – P 10 C
HC – M 20 CC
TiAlN + Al2O3
(ZrCN)
HC – P 20 C
HC – M 30 CC
TiAlN + Al2O3
(ZrCN)
HC – P 30 C
HC – M 20 CC
WSM21 HC – S 20 CC PVD TiAlN

HC – P 20 CC
WS10 HW – S 10 CC – –
HC = Coated carbide CC Primary application

HW = Uncoated carbide C Additional application

ISO turning
A1
Carbide

P M K N S H O 01 10 20 30 40
05 15 25 35 45
Coating process
Stainless steel
Hard materials
cutting properties
NF metals
Cast iron
Walter
Other
Steel

HC – K 10 CC
TiCN + Al2O3
WKK10S CVD
(+ TiCN)
HC – H 30 C
HC – K 20 CC
TiCN + Al2O3
WKK20S CVD
(+ TiCN)
HC – P 10 C
HC – K 30 CC
TiCN + Al2O3
WKP30S HC – P 35 CC CVD
(+ TiCN)
HC – M 30 C
HC – K 30 CC
TiCN + Al2O3
WAK30 CVD
(+ TiCN)
HC – P 40 C
HC – N 10 CC
WXN10 HC – P 01 C PVD TiCN plus

HC – M 01 C
HW – N 10 CC
WK1 – –
HW – S 10 C


ISO turning
A1
Cutting tool material application charts – Turning

(continued)
CBN/PCD/ceramic
P M K N S H O 01 10 20 30 40
05 15 25 35 45
Coating method
Stainless steel
Hard materials
cutting properties
NF metals
Cast iron
Walter
Other
Steel
grade Standard Cutting tool Indexable

designation designation material inserts example
WCB30 BL – H 05 CC – CBN
BH – H 10 CC
WCB50 – CBN
BH – K 10 C
WCB80 BH – K 05 CC – CBN
DP – N 20 CC
WDN10 – PCD
DP – O 20 CC
Si3N4
WSN10 CN – K 20 CC –
ceramic
SiAlON
WIS10 CN – S 10 CC –
ceramic
CR – S 20 CC
Whisker
WWS20 –
ceramic
CR – H 20 C
BH = CBN with high CBN content CC Primary application

BL = CBN with low CBN content C Additional application

ISO turning
A1
Geometry overview of turning inserts – Negative basic shape
Finishing operation
Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
Geometry Remarks/field of applications Main cutting edge Corner radius ap [mm] f [mm]
NF 0,4–3,0 0,10–0,55
– Finishing with Wiper technology 15° 15°
– High surface quality CC CC CC C
– High feeds
NFT 0,1–2,0 0,05–0,20

– Finishing titanium materials 12° 12°
– Sharp cutting edges with circumference
C C CC
fully ground, first choice
– 100° corner with NRT roughing geometry
implemented with CNMG basic shape
NF4 0,2–1,6 0,05–0,20

– Finishing stainless materials
– Finishing alloys with difficult cutting 18°30' 19°
properties R 0,5
C CC CC
– Finishing long-chipping steel materials
– Curved cutting edge for cutting pressure
reduction
FP5 0,1–2,5 0,04–0,25

– Finishing steel materials 16° 20°
0,15 0,05
– Can also be used in semi-finishing as an
CC
alternative to MP3
– Curved cutting edge for low cutting forces
Medium machining
NM 0,8–4,0 0,15–0,70
– Medium machining with Wiper technology 22° 18° 0,3
0,3
– High surface quality CC C CC C
– High feeds
NMT 0,6–4,0 0,12–0,32

– Medium machining of titanium materials 22,5°
8,5°
– Low cutting forces 5° 0,25
– Machining long-chipping steel materials CC CC
– Machining forged parts with low material

removal
NMS 0,5–4,0 0,10–0,40

– Medium machining especially for 18° 17°
high-temperature alloys 12° 0,14 10° 0,15
(Ni, Co and Fe-based alloys) C CC
– Sharp cutting edge design

– Alternative to NM4 stainless geometry
MP3 0,3–4,0 0,06–0,40

– Medium machining of long-chipping 22,5°
8,5°
steel materials 5° 0,25
– Low cutting forces due to curved CC
cutting edge
– Machining forged parts with low material
removal
CC Primary application Note: Sectional views show CNMG120408 . .

C Additional application

ISO turning
A1

(continued)
Medium machining (continued)

Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
MP5 15° 0,1 12° 0,08 0,5–8,0 0,16–0,55

– Universal geometry for steel materials R0.8 R0.4
CC
– Reinforced chip breaker blades
– Extremely wide range of applications
NM4 Stainless 20° 20° 0,5–4,5 0,10–0,40
R 1,2
R 1,2
– Universal geometry for stainless materials
C CC CC
and for high-temperature alloys
– Machining long-chipping steels
0,04 0,04
MK5 0,6–8,0 0,15–0,90

14° 0,2 14° 0,2
– Universal geometry for cast iron workpieces
C CC
– Machining steel materials with higher
strength
Roughing operations – Double-sided indexable inserts
NRT 20° 20° 0,8–9,0 0,18–0,80

– Roughing titanium materials 0,2 0,2
CC
– Stable cutting edge with protective
chamfer
NRS 1,0–6,0 0,15–0,70

– Roughing operations especially for 19° 19°
8° 0,16 8° 0,16
high-temperature alloys C CC
(Ni, Co and Fe-based alloys)
– Sharp cutting edge design
– Alternative to NR4 geometry
NR4 20° 14° 1,2–8,5 0,22–0,80

0,3 0,2
– Roughing operations in stainless materials 10° 10°
CC CC
and high-temperature alloys
RP5 0,8–12,0 0,2–1,20

– Roughing steel materials 17° 17°
3° 0,35 3° 0,3
– Stable, positive cutting edge CC C
– Open chip groove for a low cutting
temperature
RP7 0,8–8,0 0,16–0,70

R 0,4
18° 18°
R 0,4
– Interrupted cuts
– Cast skins/forged skins CC CC
– Stable cutting edge 0,16 0,16
RK5 0,6–8,0 0,16–0,80

– Universal geometry for cast iron 0° 0°
CC C
workpieces
– First choice for grey cast iron
RK7 0,8–8,0 0,25–0,80

– Cast iron machining with hard crust 0,2 0,2
20° 20°
– Interrupted cuts CC CC
– Hard machining of steel materials
CC Primary application Note: Sectional views show CNMG120408 . .


ISO turning
A1
Roughing operations – Single-sided indexable inserts

Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cut
Cast iron
Geometry Main cutting Cut
Other
Steel
Remarks/field of applications edge Corner radius ap [mm] f [mm]
NRF 0,8–12,0 0,25–1,20

0,3 0,3
– Universal single-sided roughing insert 20°
20°
– Forged parts with uneven material removal
,6
CC C C
R0
– Low power consumption
– Easy-cutting geometry 4°
NRR 2,0–17,0 0,50–1,80

– Heavy roughing 20° 25°
0,4 0,3
– Machining of cast skins/forged parts
– Interrupted cuts CC C
– Maximum depths of cut and feeds
19° 19°
CC Primary application Note: Sectional views show SNMM190616 . .


ISO turning
A1
Geometry overview of turning inserts – Positive basic shape
Finishing operation
Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
PF 0,3–3,0 0,12–0,60
– Finishing with Wiper technology 15° 15°
0,05 0,05
– High surface quality CC CC CC C
– High feeds
PF2 0,12–4,5 0,02–0,45

– Finishing insert with circumference 18° 18°
fully ground
CC CC C CC CC
– Long, small diameter shafts with
a tendency to vibrate
– Low cutting forces
FM4 20°
0,1–2,5 0,04–0,20
– Finishing insert 6°
– Excellent chip control C CC CC
– Can also be used for precision boring
FP4 20°
0,1–2,5 0,04–0,20
– Excellent chip control CC C C C
PF4 20°
0,1–2,5 0,04–0,20
– Excellent chip control CC CC CC
PF5 0,1–4,0 0,04–0,35

17° 17°
– Finishing insert with circumference
fully ground CC CC C

– Extremely narrow chip breaker groove
PS5 0,3–2,5 0,08–0,32

12° 0,1 12° 0,1
– Universal insert for operations from
finishing to medium machining C CC C C
– Can also be used for counterboring
FP6 0,3–2,5 0,08–0,32

12° 0,1 12° 0,1
– Universal insert for operations from
finishing to medium machining CC C C C
FK6 0,3–2,5 0,08–0,32

– Universal insert for operations from 12° 0,1 12° 0,1
finishing to medium machining C C CC C

CC Primary application Note: Sectional views show CCMT09T308 . . or CCGT09T308 . .


ISO turning
A1
Medium machining
Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
PM 0,5–4,0 0,12–0,60
– Finishing with Wiper technology
– High surface quality 20° 20°
R 0,6
R 0,6
– High feeds
CC C CC C
PM2 0,5–6,0 0,02–0,80

– Universal insert for non-ferrous materials
– Sharp cutting edge with circumference 25° 25°
fully ground
C C CC C
– Polished rake face
– Precision finishing on steel and stainless
materials
MM4 0,4–3,0 0,08–0,32

– Machining long-chipping materials
– Can be used universally in a wide range
7° 18°
of applications 12°
– Circumference precision-ground
C CC C CC
– Circumference precision-sintered
– Straight cutting edge for C, S and T basic
CC Primary application
shapes, for use as a chamfer insert in
boring tools
MP4 0,4–3,5 0,08–0,32

– Machining long-chipping materials
– Can be used universally in a wide range
7° 18°
of applications 12°
– Circumference precision-ground
CC C C C
– Circumference precision-sintered
– Straight cutting edge for C, S and T basic
shapes, for use as a chamfer insert in
boring tools
MK4 0,4–3,5 0,08–0,32

– Machining unstable components,
internal machining
7° 18°
– Additional version with circumference 12°
fully ground available for maximum
C C CC C
precision
– Straight cutting edge for C, S and
T basic shapes, for use as a chamfer
insert in boring tools
CC Primary application Note: Sectional views show CCMT09T308 . . or CCGT09T308 . .


ISO turning
A1

(continued)
Roughing operation
Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
RM4 0,6–5,0 0,12–0,50

– Universal geometry for roughing
12° 0,1 12° 0,1
operations to medium machining
– Extremely large chip breaking area C CC C CC
– Maximum machining volume and

tool life
RP4 0,6–5,0 0,12–0,50

12° 0,1 12° 0,1
– Extremely large chip breaking area CC C C C
– Maximum machining volume and

tool life
RK4 0,6–5,0 0,12–0,50

– First choice for grey cast iron and
ductile cast iron 12° 0,1 12° 0,1
C C CC C
– Extremely large chip breaking area
RK6 0,2–0,6 0,12–0,50

0° 0°
– Cast iron machining with hard crust
– Interrupted cuts CC C
– Stable cutting edge design
Heavy cutting
HU6 0.55 1,0–15,0 0,12–1,7

16°
– Heavy roughing 18°
– Excellent chip breaking CC CC

– Machining forged parts
– For use in train wheel machining
CC Primary application Note: Sectional views show CCMT09T308 . . ,

C Additional application CCGT09T308 . . , CCMW09T308 . . or RCMX2006 . . .

ISO turning
A1

CBN/PCD/ceramic
Ceramic
Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
...E 0,1–7,5 0,1–0,5

– Ceramic indexable insert with circumference
fully ground
0° 0°
– Rounded cutting edge for minimum
CC
cutting forces
– Machining high-temperature alloys
. . . T01020 0,1–5,0 0,1–0,45

– Ceramic indexable insert with circumference
0,1 0,1
fully ground
20° 20°
– Chamfered cutting edge for maximum
CC C
stability for medium machining to roughing
operations
CC Primary application Note: Sectional views show RNGN120700 . . .


ISO turning
A1

CBN/PCD/ceramic
PCD/ceramic cutting tool materials

Material groups
P M K N S H O

cutting properties
Stainless steel
Hard materials
NF metals
Cast iron
Cut Cut
Other
Steel
. CGT . . . FS-1 0,05–1,5 0,03–0,38

7−10°
– PCD finishing insert with circumference
fully ground in G tolerance CC C CC —
– Extremely low cutting forces due to
7°-10° rake angle
– Extremely high surface quality
. CGT . . . FS-M1 25°

25° 0,1–3,0 0,08–0,2
– PCD indexable insert with circumference 10° 10°
fully ground in G tolerance 0,09 0,09

CC C CC
– Excellent chip control thanks to laser-
generated chip-breaker geometry
– Finishing to medium machining
. CGW . . . FS-1 0,05–3,5 0,03–0,38

fully ground in G tolerance CC C CC

– Universal PCD indexable insert with 0°
rake angle
– Maximum repeat accuracy
. CGW . . . FSL/R-9 0,05–9,0 0,03–0,38

fully ground in G tolerance CC C CC

– Cutting edge with guide pad
– Maximum depth of cut and shoulder
machining
...E 0,1–3,6 0,1–0,32

– Ceramic indexable insert with circum- 0° 0°
ference fully ground CC
– Rounded cutting edge for minimum cutting
forces
. . . T01020 0,1–3,6 0,1–0,32

0,1 0,1
– Ceramic indexable insert with circum- 20° 20°
ference fully ground CC C
– Chamfered cutting edge for maximum stability
for medium machining to roughing operations
CC Primary application Note: Sectional views show CCGT09T304 . .,

C Additional application CCGW09T304 . . or RCGX090700 . . .

ISO turning
A1
Application information for Wiper indexable inserts
1. Achievable surface quality with Wiper indexable inserts
Ra [μm]
4,0
A single geometry for two applications. 3,75
R 0,8 Standard radius
– Same surface quality with double the feed rate 3,50

3,25
– Double the surface quality with the same feed rate
3,00
A table containing the achievable surface qualities with the R 1,2
standard radius can be found on the next page. 2,75
2,50
2,25
R 0,8
2,00
1,75
1,50
R 0,4
1,25
1,00
0,75
0,50
0,25
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 f [mm]
2. Edge formation: Comparison between Wiper indexable inserts and standard indexable inserts
The specified maximum feeds may not Wiper geometry: Standard geometry with corner radius
be exceeded with Wiper geometries: NF/NM and PF/PM
Rmax
f Rmax
R fmax [mm] R R f
2
ap
0,4 ≤ 0,4
b*
0,8 ≤ 0,55 ap
95° 95° 80°
80°
1,2 ≤ 0,7
* b = fmax
3. Usage recommendations
Use turning toolholders with a lead angle of κ = 95° for

CNMG/CCMT and WNMG/WCMT Wiper indexable inserts,
and a lead angle of κ = 93° for DNMG/DCMT Wiper indexable
inserts, for example:
95° 95° 93°
CNMG120408–NM ‡ DCLNR2525M12
WNMG080408–NM ‡ DWLNR2525MO8
= Wiper effect
DNMG150608–NM ‡ DDJNR2525M15
The Wiper effect is achieved during longitudinal turning and facing.

The Wiper effect is not achieved with inclined surfaces and radii.
Please note that radius compensation is required in the area of radii and inclined surfaces;
otherwise contour distortion will occur.

ISO turning
A1
Application information:
Surface quality
Achievable surface quality with standard radius
Select the largest possible corner radius permitted by the workpiece contour, system rigidity and chip control.
The larger the corner radius, the better the surface quality that can be achieved.
R Theoretical Ra/Rz values depending on the Feed ranges depending on the corner radius
feed and corner radius and type of machining
r
Round Ra/Rz in μm Medium machining Finishing operations

Corner indexable to to
radius insert 0,4/1,6 1,6/6,3 3,2/12,5 6,3/25 8/32 32/100 roughing operations medium machining
diameter
Feed f in mm Feed f in mm
mm mm
0,2 0,05 0,08 0,13 0,04–0,15
0,4 0,07 0,11 0,17 0,22 0,07–0,22
0,8 0,10 0,15 0,24 0,30 0,38 0,25–0,60 0,10–0,30
1,2 0,19 0,29 0,37 0,47 0,35–0,85 0,20–0,40
1,6 0,34 0,43 0,54 1,08 0,40–1,00
2,4 0,42 0,53 0,66 1,32 0,50–1,20
6 0,20 0,31 0,49 0,62 0,20–0,60
8 0,23 0,36 0,56 0,72 0,23–0,70
10 0,25 0,40 0,63 0,80 1,00 0,25–0,80
12 0,44 0,69 0,88 1,10 0,40–0,80
16 0,51 0,80 1,01 1,26 2,54 0,50–1,00
20 0,89 1,13 1,42 2,94 0,60–1,25
25 1,26 1,58 3,33 0,70–1,50
Rmax
R f Rmax Roughness profile depth [μm]
ap
f Feed per revolution [mm]
r Corner radius of the indexable insert [mm]
95° 80°

ISO turning
A1
The indexable insert size is selected depending on the depth of cut ap
Finishing Medium Roughing

Applications with low depths Applications with average depths Applications with high machining
of cut and feeds of cut and feeds volume and feed rates
f = 0.1-0.3 mm f = 0.2-0.5 mm f = 0.4-1.5 mm
Machining
Finishing Medium Roughing
Size Depth of cut ap [mm]
1 2 3 4 5 6 7 8 9 10 11 12 13
Basic shape
06
C 80°
09
12
16
19
25
07
D 55°
11
15
05
R
06
08
10
12
15
16
19
20
25
32
06
S 90°
09
12
15
19
25
06
T 60°
09
11
16
22
27
33
11
V 35°
13
16
22
02
W 80°
03
04
06
08
10

ISO turning
A1
Wear patterns from turning
Rake face
Cutting edge
Flank face
Corner radius
Wear patterns Characteristics Measures
Flank face wear Abrasion on the flank face of the – Use a more wear-resistant grade
indexable insert – Increase the feed
– Reduce the cutting speed
– Optimise the cooling
Plastic deformation Deformation of the cutting edge due – Use a more wear-resistant grade
to thermal overload and high cutting – Reduce the feed
forces – Reduce the depth of cut
Fractures Fractures along the cutting edge – Use a tougher carbide grade
– Use a more stable tool and reduce the
projection length
– Use a more stable geometry
Build-up on the Adhesion of material along the cutting – Increase the cutting speed
cutting edge edge on the rake face – Use a sharper geometry with a larger
rake angle
– Use an indexable insert with a treated
surface (Tiger·tec® Silver)
Crater wear Crater-shaped cavities on the rake – Reduce the cutting speed
face of the indexable insert – Use a geometry with a larger rake angle
– Use a grade that is more wear-resistant
with a high Al2O3 content
– Use a more open geometry
Notch or oxidation Notching around the depth of cut – Vary the depth of cut
wear on the indexable insert – Use a tougher grade (PVD-coated)
– Use a more open geometry
– Use a tool with a leading cutting edge
(κ = 45°/75°)
– With notch wear, select a smaller corner
radius
Hairline cracks Multiple cracks running vertical to – Possibly work the interrupted cut without
the cutting edge, caused by thermal coolant
shock – Reduce the cutting speed
– Reduce the feed
– Use a tougher grade
– Use a more stable geometry

ISO turning
A1
Application information: Carbide basic body
Wear patterns in turning applications with PCD

Rake face
PCD collet
Corner radius
Cutting edge Flank face
Wear patterns with PCD Cause Measures
Abrasion – Due to hard inclusions (e.g. silicon grains) – Use a coarser PCD grain size
or alloying elements, small parts of the – Reduce the cutting speed
cutting edge are gradually worn away – Reduce the feed
(abrasion) – Implement a more stable cutting edge
– Optimise the coolant/increase the pressure
– Increase the clearance angle
Build-up on the – The material to be machined adheres – Check for wear

cutting edge to the tool cutting edge (adhesion) – Increase the cutting speed vc
– When it is stripped away, small particles – Use a finer PCD grain size
are torn from the cutting edge – Use an insert with a sharper wedge angle/chip
breaker
– Optimise the coolant/increase the pressure
– Check the lubricant concentration
Fractures – When machining very hard materials or – Grade with a higher breakage resistance
performing interrupted cuts – Review the machining strategy
– Flaking, cracks or fractures can occur – Adjust the cutting edge preparation
along the cutting edge (more stable cutting edge)
– Reduce the clearance angle
– Check for chip impacts
Apparent chip – When machining extremely tough and – Optimise the cooling or use a coolant with
freshly cast aluminium without cooling a higher concentration of lubricant
lubricant or with only minimum quantity – Use chip breaker geometry
lubrication – Increase the minor clearance angle
– Insufficient lateral clearance angle – Increase the projection of the PCD insert
or projection or the PCD blank beyond the basic body
Layer flaking – Often occurs when machining sintered – Select a more stable edge design
materials and irregular surfaces – Select a coarser PCD grain size
– Potentially excessively sharp cutting edge – Reduce the cutting speed
design – Reduce the clearance angle
– Vibrating, unstable components
Overload fracture – Sudden overloading of the cutting edge – Analyse the machining strategy
– It may even be necessary to select a negative
chamfer
Important:
Avoid machining temperatures of above 730 °C at all times.
Consequences of excessive machining temperatures:

– The solder joint loses adhesion
– The PCD grain reaches reaction temperature ‡ microstructure transforms into graphite

ISO turning
A1
Vibration tendency
D
Vibration occurs when machining long, small diameter components or during internal machining using boring bars with
a long projection length. This is particularly the case if L/D > 4.
L
When selecting a tool, the following parameters must be taken into account in order to reduce the risk of vibration:
D
– Vibration tendency +
1. Basic insert shape

Positive Negative, double-sided Negative, single-sided
2. Insert shape 35° 80°
3. Approach angle
91° 75° 45°
4. Corner radius
r = 0,2 mm r = 0,4 mm r = 0,8–1,2 mm
5. Effective rake angle
6. Coating
Uncoated PVD CVD
Following selection of the tool/indexable insert, there are other factors that play an important role in reducing vibration:
1. Clamp tools and boring bars at the shortest length possible

2. Select a depth of cut 0.1 mm greater than the corner radius of the indexable insert
3. If vibration occurs, reduce the cutting speed by 50-70% in comparison to the specified catalogue values
4. Check the clamping pressure at the tail stock spindle during external machining

ISO turning
A1
Walter Turn turning tools – Effective rake angle
The effective rake angle of a tooling system is determined by the indexable insert geometry and the inclination of the indexable insert in the tool holder.
γ
λS
γ
λS
λS (inclination angle) The angle is tilted around the peripheral cutting edge (S) parallel to the main cutting edge.
γ (rake angle) This is the angle at right angles to the main cutting edge, measured with a smooth indexable insert without chip breaker groove.
In order to obtain the effective rake angle of the tooling system, the rake angle of the indexable insert must also be taken into consideration.
Walter Capto™ – Boring operations with turning toolholders for external machining
Walter Capto™ tools for external machining can also be used for internal machining of large diameters.
This often takes place on turn/mill centres or vertical turret lathes.
Dmin
Dmin2
Dmin2
Dmin
Dmin = Minimum internal machining diameter. Toolholder parallel to the axis of rotation.
Dmin2 = Minimum internal machining diameter. Toolholder angled at 90° in relation to the axis of rotation.

ISO turning
A1
Assembly parts and accessories for Walter Turn rigid clamping
Standard clamps
Application
for indexable inserts with drilled hole
Set PK240 set PK244 set PK241 set PK242 set PK243 set PK301 set
FS1472 FS1473 FS1473 FS1474 FS1474 FS1589

Clamp screw
(Torx 9IP) (Torx 15IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 25IP)

Pin (fitted in the toolholder) RS116 RS117 RS117 RS117 RS117 RS117
Pressure spring FS1469 FS1470 FS1470 FS1471 FS1471 FS1590
Clamp PK240 PK244 PK241 PK242 PK243 PK301
Type Size
CN . . 09 . . CN . . 12 . . CN . . 16 . . CN . . 19 . .
DN . . 11 . . DN . . 15 . . DN . . 15 . .
SN . . 09 . . SN . . 12 . . SN . . 15 . . SN . . 19 . . SN . . 25 . .
TN . . 16 . . TN . . 22 . .
VN . . 16 . .
WN . . 06 . . WN . . 08 . . WN . . 10. .
A 262 Assembly parts and accessories

ISO turning
A1
Reinforced clamps with carbide shoe
Application
for indexable inserts

for indexable inserts with hole* or dimple
without hole

Set PK245 set PK246 set PK254 set
FS1473 FS1474 FS1473

Clamp screw
Pin (fitted in the toolholder) RS117 RS117 RS117
Carbide clamping plate FK371 FK372 FK 371
Clip for clamping plate FK373 FK373 FK 373
Screw for clamping plate FS1492 FS1492 FS1492
FS1490 FS1490 FS1490

Key for clip screw
Shim for basic shape CN . . 1207 . . AP411–CN1207
Shim for basic shape DN . . 1507 . . AP412–DN1507
Shim for basic shape SN . . 1207 . . AP413–SN1207
Type Size
CN . . 12 . . CN . . 16 . . CN . . 12 . .
DN . . 15 . . DN . . 15 . .
SN . . 12 . . SN . . 15 . . SN . . 12 . .
TN . . 22 . . TN . . 22 . .
WN . . 08 . . WN . . 10. . WN . . 08 . .
Walter Turn clamp holders are fitted as standard with the PK241 set. By using the PK254 set, they can be used to clamp the following ceramic inserts without hole:
CN . . 12 . . / DN . . 15 . . /SN . . 12 . . ‡ For this, separate shims must be ordered (see table).
*
Alternatively in the event of erosion on the standard clamp
Assembly parts and accessories A 263

ISO turning
A1
Assembly parts and accessories for Walter Turn rigid clamping with precision cooling
Standard clamps for tools with precision cooling
Application
for indexable inserts with hole

Version
Right
Left
Set PK255 set PK256 set PK261R/L set PK266R/L set
FS1473 FS1473 FS1473 FS1473

Clamp screw

Clamp PK255 PK256 PK261R/L PK266R/L
Type Size
CN . . 12 . . CN . . 12 . .
DN . . 11 . .
DN . . 11 . . DN . . 15 . .
DN . . 15 . .
SN . . 12 . . SN . . 12 . .
TN . . 16 . . TN . . 16 . .
TC . . 16T3 . . TC . . 16T3 . .
VB . . 1604 . . VB . . 1604 . .
WN . . 08 . . WN . . 08 . .

ISO turning
A1
Shims for Walter Turn clamp holders – External and internal machining
Standard clamps Reinforced clamps with carbide shoe
for indexable inserts for indexable inserts for indexable inserts

with hole with hole* or dimple without hole
PK240 set/PK244 set
PK245 set
PK241 set/PK242 set PK254 set
PK246 set
PK243 set/PK301 set
s
h hges
s = Insert thickness
Indexable insert Shim
Insert thickness s Height h Clearance Centre height hges

Insert seat for insert Type Designation Status
mm mm angle mm
CN . . 09 . . CN . . 0903 . . 3,18 AP414–CN09 Assembly part 3,18 7° 6,36
CN . . 1204 . . 4,76 AP354–CN12 Assembly part 3,175 12° 7,935
CN . . 1207 . . 7,94 AP411–CN1207 Accessories 3,175 0° 11,11
DN . . 11 . . DN . . 1104 . . 4,76 AP305–DN11 Assembly part 3,18 8° 7,94
DN . . 15 . . DN . . 1504 . . 4,76 AP304–DN1504 Accessories 6,35 0° 11,11
DN . . 1506 . . 6,35 AP304–DN15 Assembly part 4,76 0° 11,11
DN . . 1507 . . 7,94 AP412–DN1507 Accessories 3,17 0° 11,11
RC/P . . 09 . . RC/P . . 0907 . . 7,74 AP416–RC0907 Assembly part 4 0° 11,74
h
RC/P . . 12 . . RC/P . . 1207 . . 7,74 AP417–RC1207 Assembly part 4 0° 11,74
RN . . 12 . . RN . . 1207 . . 7,94 AP418–RN1207 Assembly part 4,76 0° 12,7
RN . . 15 . . RN . . 1507 . . 7,94 AP419–RN1507 Assembly part 4 0° 11,94
RN . . 19 . . RN . . 1907 . . 7,94 AP420–RN1907 Assembly part 6 0° 13,94
SN . . 09 . . SN . . 0903 . . 3,18 AP415–SN09 Assembly part 3,175 7° 6,355
SN . . 1204 . . 4,76 AP355–SN12 Assembly part 3,175 12° 7,935
SN . . 1207 . . 7,94 AP413–SN1207 Accessories 3,17 0° 11,11
TN . . 16 . . TN . . 1604 . . 4,76 AP321–TN16 Assembly part 6,35 0° 11,11
TN . . 1604 . . 4,76 AP356–TN16 Assembly part 3,175 12° 7,935
TN . . 22 . . TN . . 2204 . . 4,76 AP322–TN22 Assembly part 6,35 0° 11,11
VN . . 16 . . VN . . 1604 . . 4,76 AP312–VN16 Assembly part 3,175 7° 7,935
WN . . 06 . . WN . . 0604 . . 4,76 AP306–WN06 Assembly part 3,175 7° 7,935

WN . . 0804 . . 4,76 AP307–WN08 Assembly part 4,76 0° 9,52

ISO turning
A1
Assembly parts and accessories

Coolant hose set for shank tools with precision cooling (-P)
Shank tools -P
m
30 m
m 10 m
K601 . . .
Note:
m All shank tools with precision cooling are equipped with three
10 m
coolant connections. Before using the tools, ensure that the
unused connections are sealed with the screws provided in
m the set. The coolant sets K601 . . . for shank tool holders are
30 m
approved for pressures from 10 bar to a maximum of 275 bar.
Note:
The shank length of the tools can be shortened by up to 20 mm,
as the thread depth of all Walter Turn and Walter Cut square
G1/8" shanks with precision cooling is 30 mm.
Walter coolant hose set -P
Length
150 mm K601.01.150 SET K601.02.150 SET K601.03.150 SET
250 mm K601.01.250 SET K601.02.250 SET K601.03.250 SET
Individual components Designation 300 mm K601.01.300 SET K601.02.300 SET K601.03.300 SET
Set contents
M10 connection element FS2252 1× — —
G1/8" double connection

element
FS2253 2× 1× —
G1/8" angle connection FS2254 — 1× 2×
M10 angle connection FS2255 — 1× 1×

G1/4"-G1/8" reducer FS2256 — 1× 1×
Copper gasket FS2257 2× 3× 4×
G1/8" screw FS2258 1× 1× 1×
Brass blanking plug FS2259 1× 1× 1×
G1/8" brass nozzle FS2260 1× 1× 1×
O-ring FS2261 2× 2× 2×

ISO turning
A1

Coolant nozzles and coolant adaptors
Coolant nozzles – Walter Capto™
Walter Capto™ size
C3 + C4 C5 + C6 C6 + C 8
Standard brass coolant nozzle

FS1477 FS1476 FS1479
up to 80 bar
Plug-in inserts for changing FS1477HEX FS1476HEX FS1479HEX

the nozzles (SW5) (SW5) (SW5)
FS2158 FS2158 FS2158

Key for plug-in insert
(SW5) (SW5) (SW5)
Please note:
A different coolant nozzle is installed in certain Walter Capto™ tools (C3-C8) from the one specified in the table above.
This detailed information can be found on the relevant tool page.
K600 coolant adaptor for Walter Turn boring bars with rigid, lever or screw clamping
d1 l1 d2
K600.06.25.054 6 25 5,4
d1 d2
K600.08.28.066 8 28 6,6
l1 K600.10.28.086 10 28 8,6
K600.12.38.086 12 38 8,6
K600.16.40.137 16 40 13,7
K600.20.40.137 20 40 13,7
K600.25.44.137 25 44 13,7
K600.32.44.137 32 44 13,7
K600.40.46.137 40 46 13,7
K600.50.46.137 50 46 13,7
Note: d1 corresponds to the shank diameter of the boring bar
Please note:
Coolant adaptors can be cut off approx. 3 mm after the O-ring if necessary. This enables shorter clamping when using the boring bar and coolant adaptor in a
Walter Capto™ or VDI boring bar adaptor. This prevents coolant escaping via the clamping surface and also provides a higher pressure for the internal coolant supply.

A 268
A – Turning catalogue A 2: Grooving
Page
Cutting inserts Product range overview A 271
Walter Select – Cutting inserts A 275 A2
Double-edged cutting inserts – GX A 278
Single-edged cutting inserts – SX A 286
Walter Cut grooving tools Product description A 290
Walter Select – Grooving tools A 304
Shank tools/parting blades/boring bars A 308
Walter Capto™ groove turning holders A 368
Technical information – Grooving Cutting data A 394
Geometry overview – Cutting inserts A 397
Assembly parts and accessories Coolant hose set for groove turning holders with precision cooling A 420
A 269
A2
A 270
Grooving
Product range overview of cutting inserts and cutting tool materials:

Grooving
A2
Cutting inserts Cutting tool materials: Carbide
01 10 20 30 40
Insert shape Description Page Application Coating 05 15 25 35 45
Parting off/grooving CVD WKP13S
CVD WKP23S
Walter Cut
GX grooving inserts,
GX double-edged/
A 278 CVD WKP33S
ISO P
single-edged
PVD WSM23S
Walter Cut PVD WSM33S
SX SX grooving inserts, A 286

single-edged PVD WSM43S
PVD WSM13S
Recessing
PVD WSM23S
ISO M
Walter Cut PVD WSM33S
GX GX grooving inserts, A 282
double-edged PVD WSM43S
CVD WKP13S
Circlip grooves
ISO K CVD WKP23S
Walter Cut CVD WKP33S

GX-S GX grooving inserts, A 281
double-edged
ISO N — WK1
Semi-finished PVD WSM13S

parts/blanks
PVD WSM23S
ISO S
Walter Cut
PVD
GX GX grooving inserts, A 285
WSM33S
double-edged
PVD WSM43S
Wear resistance
Walter Cut
SX SX grooving inserts, A 288
single-edged Toughness
Cutting inserts A 271

Grooving
Designation key for Walter Cut cutting inserts
Example:
A2 GX 24 – 2 E 300 N 03 – U F 4
1 2 3 4 5 6 7 8 9 10
1 2 3 4
Insert length l
Insert type Width category Basic shape
[mm]
GX E
SX 09 l=9
0
16 l = 16
F
1
24 l = 24
2
R
30 l = 30 3
4
S
5
Application
C “Cut off” S “Slitting”

– Parting off – Slitting
– Radial grooving – Slot milling
G “Grooving” U Universal
– Radial grooving – Longitudinal turning
– Axial grooving – Radial grooving
– Parting off – Axial grooving
– Facing
R Full radius – Parting off
– Radial grooving
– Axial grooving
– Longitudinal turning Facing
– Facing
Parting off
Radius
Longitudinal Radial Axial

turning Grooving Grooving
A 272 Cutting inserts

Grooving
A2
5 6 7
Insert width s Corner radius r [mm]/
Version
[mm] approach angle χ [°]
02 r = 0,2
Grooving: R Right 03 r = 0,3
04 r = 0,4
05 r = 0,5
L Left etc.
For example:
200 s = 2,0
N Neutral
220 s = 2,2
250 s = 2,5
6 χ = 6°
300 s = 3,0
Parting off: R Right 7 χ = 7°
310 s = 3,1 χ
15 χ = 15°
etc.
etc.
L Left
9 10
Rake angle Cutting edge
smaller tough
A 1
3
D
F
6
K 8
larger sharp

Grooving
Designation key for carbide cutting tool materials – Grooving
Example:
A2 W S M 33 S
Walter 1 2 3 4
1 2 3 4
or coating type
Wear Cutting tool

P Steel P Steel resistance materials for: S Tiger·tec® Silver

10
N NF metals N NF metals 5 ISO turning
20
21
23 3 Grooving
30
32
A coating
43

Grooving
Walter Select for grooving cutting inserts

Step by step to the right cutting insert
STEP 1
Code Machining
Determine the material to be machined from letters groups Groups of the materials to be machined
page A 468 onwards.
All types of steel and steel casting, with A2
Note the machining group that corresponds P P1–P15 Steel the exception of steel with an austenitic
structure
to your material, e.g.: P10.


vermicular graphite


S S1–S10
cutting properties
alloys

chilled cast iron

O O1–O6 Other
plastics, graphite
STEP 2 Double-sided Single-sided

Determine the basic shape of the cutting inserts cutting inserts
cutting insert:
SX . . .
GX . . . E . . .
GX . . . F . . .
– Parting off diameter +
– Cutting depth [T] +

and workpiece
Type of cutting action very good good moderate
a a b
Smooth cut,
premachined surface
a b c
Cast or forged skin,
variable depths of cut
Interrupted cuts b c c

Grooving
STEP 4
Determine the indexable insert geometry via the cutting edge stability and feed.
GX and SX cutting inserts for parting off from page A 278 onwards
A2 Steel P
Stainless
M/S Cast iron K
steel
Cutting edge Cutting edge Cutting edge
CE4
stable
stable
stable
e e
choic choic
First First
CE4 GD6 CE4
CF5 hoice
First c
CF5 GD3
CF6 CF6
sharp
sharp
sharp
Feed Feed Feed
low high low high low high
GX and SX cutting inserts for grooving from page A 278 onwards
Steel P Stainless steel M/S Cast iron K

e
UD4 choic
stable
stable
stable
UF4 First
UA4
GD6
choic
e UD4
CE4 First e CE4
UF4 choic
First
GD3 GD3 UF4
sharp
sharp
sharp
Feed Feed Feed

GX cutting inserts for recessing from page A 282 onwards
Steel P Stainless steel M/S Cast iron K

stable
stable
stable
e
choic choic
e
First choic
e First
UD4 First UA4
UF4
UF4 UD4
UD6 UF4
UD6
sharp
sharp
sharp
Feed Feed Feed


Grooving
STEP 4 – Continued
Determine the indexable insert geometry via the cutting edge stability and feed.
GX full radius cutting inserts for copy turning from page A 284 onwards
Steel P Stainless steel M/S Cast iron K A2

stable
stable
stable
e e
choic choic
First RD4 First
RD4 RD4
e
choic
First
RF8 RF8 RF8
sharp
sharp
sharp
Feed Feed Feed
NF metals N
Cutting edge
stable
RK8
sharp
Feed
low high
STEP 5 GX...N GX...R GX...L

Grooving and parting off κ
r
You will find the cutting tool material GX cutting inserts lTol. r r
S S S
recommendation and the feed value (f) Tiger·tec® Silver r r r
κ
on the specified catalogue page.
Cutting inserts
P M K S
for
xable insert
HC HC HC HC
Optimum inde
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r l f STol lTol
Designation mm mm κ mm mm mm mm
Poor GX16-0E150N01-CF6 1,5 0,15 16,6 0,03–0,10 ±0,02 ±0,05 bc bc bc

Average GX16-0E150R/L10-CF6 1,5 0,15 10° 16,6 0,03–0,10 ±0,05 ±0,05 b b b
Good
itions GX16-1E200N02-CF6 2 0,2 16,6 0,03–0,12 ±0,05 ±0,15 bc bc bc
machining cond GX16-1E200R/L6-CF6 2 0,2 6° 16,6 0,03–0,10 ±0,05 ±0,15 bc bc bc
GX16-1E200R/L7-CF6 2 0 7° 16,2 0,03–0,10 ±0,05 ±0,15 b b b
GX16 1E200R/L15 CF6 2 0 15° 16 2 0 03 0 10 ±0 05 ±0 15 b b b
STEP 6
Cutting data for Walter Cut
Choose the cutting data for your
selected cutting insert in the technical
information from page A 394 onwards. = Cutting data for wet machining
Starting values for

cutting speed vc [m/min]
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group
HC
and code letters WSM13S WSM23S
N/mm2
C ≤ 0.25% Annealed 125 430 P1 CC C 200 190

Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 190 180
C > 0.55% Heat-treated 300 1010 P5 CC C 160 150
A l d 175 590 P7 CC C 190 180

Grooving
GX...N GX...R GX...L

r r r
lTol.
GX cutting inserts S S S
®
Tiger·tec Silver r r
κ
r
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r l f STol lTol
GX16-0E150N01-CF6 1,5 0,15 16,6 0,03–0,10 ±0,02 ±0,05 bc bc bc
GX16-0E150R/L10-CF6 1,5 0,15 10° 16,6 0,03–0,10 ±0,05 ±0,05 b b b
GX16-1E200N02-CF6 2 0,2 16,6 0,03–0,12 ±0,05 ±0,15 bc bc bc
GX16-1E200R/L6-CF6 2 0,2 6° 16,6 0,03–0,10 ±0,05 ±0,15 bc bc bc
GX16-1E200R/L7-CF6 2 0 7° 16,2 0,03–0,10 ±0,05 ±0,15 b b b
GX16-1E200R/L15-CF6 2 0 15° 16,2 0,03–0,10 ±0,05 ±0,15 b b b
GX16-1E250N02-CF6 2,5 0,2 16,6 0,03–0,15 ±0,05 ±0,15 bc bc bc
GX16-1E250R/L6-CF6 2,5 0,2 6° 16,6 0,03–0,12 ±0,05 ±0,15 bc bc bc
GX16-2E300N02-CF6 3 0,2 16,6 0,04–0,20 ±0,05 ±0,15 bc bc bc
GX16-2E300R/L6-CF6 3 0,2 6° 16,6 0,04–0,16 ±0,05 ±0,15 bc bc bc
GX16-2E300R/L7-CF6 3 0 7° 16,2 0,04–0,13 ±0,05 ±0,15 b b b
GX16-2E300R/L15-CF6 3 0 15° 16,2 0,04–0,13 ±0,05 ±0,15 b b b
GX24-1E200N02-CF6 2 0,2 24 0,03–0,12 ±0,05 ±0,15 bc bc bc
GX24-2E300N02-CF6 3 0,2 24,6 0,04–0,20 ±0,05 ±0,15 bc bc bc
GX24-2E300R/L6-CF6 3 0,2 6° 24,6 0,04–0,16 ±0,05 ±0,15 bc bc bc
GX24-2F300N02-CF6 3 0,2 24 0,04–0,20 ±0,05 ±0,15 bc bc bc
GX16-1E200N00-CF5 2 0 16,6 0,03–0,10 ±0,02 ±0,05 bc bc bc

GX16-1E200N02-CF5 2 0,2 16,6 0,04–0,12 ±0,05 ±0,15 abcabc abc
GX16-1E200R/L6-CF5 2 0,2 6° 16,6 0,03–0,10 ±0,05 ±0,15 bc bc bc
GX16-1E200R/L7-CF5 2 0 7° 16,4 0,03–0,10 ±0,05 ±0,15 b b b
GX16-1E200R/L15-CF5 2 0 15° 16,4 0,03–0,10 ±0,05 ±0,15 b b b
GX16-1E250N02-CF5 2,5 0,2 16,6 0,05–0,15 ±0,05 ±0,15 bc bc bc
GX16-1E250R/L6-CF5 2,5 0,2 6° 16,6 0,03–0,12 ±0,05 ±0,15 bc bc bc
GX16-2E300N02-CF5 3 0,2 16,6 0,08–0,20 ±0,05 ±0,15 abcabc abc
GX16-2E300R/L6-CF5 3 0,2 6° 16,6 0,04–0,16 ±0,05 ±0,15 bc bc bc
GX16-2E300R/L7-CF5 3 0 7° 16,6 0,04–0,13 ±0,05 ±0,15 b b b
GX16-2E300R/L15-CF5 3 0 15° 16,6 0,04–0,13 ±0,05 ±0,15 b b b
GX24-1E200N02-CF5 2 0,2 24 0,04–0,12 ±0,05 ±0,15 abcabc abc
GX24-1E250N02-CF5 2,5 0,2 24 0,05–0,15 ±0,05 ±0,15 bc bc bc
GX24-2E300N00-CF5 3 0 24,6 0,04–0,16 ±0,02 ±0,05 bc bc bc
GX24-2E300R/L6-CF5 3 0,2 6° 24,6 0,04–0,16 ±0,05 ±0,15 bc bc bc
GX24-3E400R/L6-CF5 4 0,2 6° 24,6 0,10–0,18 ±0,05 ±0,15 bc bc bc
GX24-3E500N03-CF5 5 0,3 24 0,10–0,25 ±0,05 ±0,15 bc bc bc
GX24-2F300N02-CF5 3 0,2 23,7 0,08–0,20 ±0,05 ±0,15 bc bc bc
GX24-3F400N02-CF5 4 0,2 23,7 0,10–0,22 ±0,05 ±0,15 bc bc bc
GX24-3F500N03-CF5 5 0,3 23,7 0,10–0,25 ±0,05 ±0,15 bc bc bc
lTol = Repeat accuracy when changing indexable inserts HC = Coated carbide

Radius tolerance rTol = ±0.05 mm
Parting off with diameters up to 32 mm is possible with GX16 inserts (l = 16.6 mm)
A 394 A 396 A 294 A 296

Grooving

r r r
lTol.
®
κ
r
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r l f STol lTol
GX16-1E200N02-CE4 2 0,2 16,6 0,06–0,15 ±0,05 ±0,15 abcabc abc
GX16-1E200R/L6-CE4 2 0,2 6° 16,6 0,04–0,10 ±0,05 ±0,15 bc bc bc
GX16-1E250N02-CE4 2,5 0,2 16,6 0,07–0,18 ±0,05 ±0,15 bc bc bc
GX16-1E250R/L6-CE4 2,5 0,2 6° 16,6 0,05–0,12 ±0,05 ±0,15 bc bc bc
GX16-2E300N02-CE4 3 0,2 16,6 0,09–0,30 ±0,05 ±0,15 abcabc abc
GX16-2E300R/L6-CE4 3 0,2 6° 16,6 0,09–0,24 ±0,05 ±0,15 bc bc bc
GX24-1E200N02-CE4 2 0,2 24 0,06–0,15 ±0,05 ±0,15 aabcabcbabc
GX24-1E250N02-CE4 2,5 0,2 24 0,07–0,18 ±0,05 ±0,15 a bc bcb bc
GX24-2E300R/L6-CE4 3 0,2 6° 24,6 0,09–0,24 ±0,05 ±0,15 a bc bcb bc
GX24-3E400R/L6-CE4 4 0,2 6° 24,6 0,10–0,26 ±0,05 ±0,15 bc bc bc
GX24-3E500N03-CE4 5 0,3 24 0,12–0,35 ±0,05 ±0,15 a bc bcb bc
GX24-4E600N03-CE4 6 0,3 24 0,12–0,40 ±0,05 ±0,15 a bc bcb bc
GX24-2F300N02-CE4 3 0,2 24 0,09–0,30 ±0,05 ±0,15 bc bc bc
GX24-3F400N03-CE4 4 0,3 24 0,10–0,32 ±0,05 ±0,15 bc bc bc
GX09-1E200N02-GD3 2 0,2 9 0,04–0,12 ±0,02 ±0,02 a bc bcb bc

GX09-1E250N02-GD3 2,5 0,2 9 0,04–0,14 ±0,02 ±0,02 a bc bcb bc
GX09-2E300N03-GD3 3 0,3 9 0,06–0,18 ±0,02 ±0,02 a bc bcb bc
GX09-2E350N03-GD3 3,5 0,3 9 0,06–0,18 ±0,02 ±0,02 a bc bcb bc
GX16-1E200N02-GD3 2 0,2 16 0,04–0,12 ±0,02 ±0,02 a bc bcb bc
GX16-1E250N02-GD3 2,5 0,2 16 0,04–0,14 ±0,02 ±0,02 a bc bcb bc
GX16-2E300N03-GD3 3 0,3 16 0,06–0,18 ±0,02 ±0,02 a bc bcb bc
GX16-3E400N04-GD3 4 0,4 16 0,10–0,20 ±0,02 ±0,02 a bc bcb bc
GX16-3E500N04-GD3 5 0,4 16 0,12–0,25 ±0,02 ±0,02 a bc bcb bc
GX16-4E600N05-GD3 6 0,5 16 0,14–0,28 ±0,02 ±0,02 bc bc bc
GX24-2E300N03-GD3 3 0,3 24 0,06–0,18 ±0,05 ±0,15 a bc bcb bc
GX24-3E400N04-GD3 4 0,4 24 0,10–0,20 ±0,05 ±0,15 a bc bcb bc
GX24-3E500N04-GD3 5 0,4 24 0,12–0,25 ±0,05 ±0,15 a bc bcb bc
GX24-4E600N05-GD3 6 0,5 24 0,14–0,28 ±0,05 ±0,15 a bc bcb bc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
A 394 A 396 A 294 A 296

Grooving

r r r
lTol.
®
κ
r
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r l f STol lTol
GX16-1E200N02-GD6 2 0,2 16 0,04–0,12 ±0,05 ±0,15 ab ab ab
GX16-1E250N02-GD6 2,5 0,2 16 0,06–0,17 ±0,05 ±0,15 ab ab ab
GX16-2E300N03-GD6 3 0,3 16 0,08–0,18 ±0,05 ±0,15 ab ab ab
GX16-3E400N04-GD6 4 0,4 16 0,10–0,22 ±0,05 ±0,15 ab ab ab
GX16-3E500N04-GD6 5 0,4 16 0,12–0,24 ±0,05 ±0,15 ab ab ab
GX16-4E600N05-GD6 6 0,5 16 0,14–0,30 ±0,05 ±0,15 ab ab ab
GX24-2E300N03-GD6 3 0,3 24 0,08–0,18 ±0,05 ±0,15 ab ab ab
GX24-3E400N04-GD6 4 0,4 24 0,10–0,22 ±0,05 ±0,15 ab ab ab
GX24-3E500N04-GD6 5 0,4 24 0,12–0,24 ±0,05 ±0,15 ab ab ab
GX24-4E600N05-GD6 6 0,5 24 0,14–0,30 ±0,05 ±0,15 ab ab ab
A 394 A 396 A 294 A 296

Grooving

Grooving of circlip grooves Tmax
lTol.
GX cutting inserts S
S
S
r Tmax
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
WTA33
WTA33
s r Tmax l f STol lTol
Designation mm mm mm mm mm mm mm
GX09-1S1.00R/L 1 0 1,14 9 0,05–0,10 ±0,02 ±0,02 b b
GX09-1S1.20R/L 1,2 0 1,34 9 0,05–0,10 ±0,02 ±0,02 b b
GX09-1S1.40R/L 1,4 0 1,53 9 0,05–0,10 ±0,02 ±0,02 b b
GX09-1S1.70R/L 1,7 0 1,82 9 0,05–0,10 ±0,02 ±0,02 b b
GX09-1S1.95N 1,95 0,1 9 0,05–0,10 ±0,02 ±0,02 b b
GX09-1S2.25N 2,25 0,1 9 0,05–0,12 ±0,02 ±0,02 b b
GX09-2S2.75N 2,75 0,1 9 0,05–0,12 ±0,02 ±0,02 b b
GX09-2S3.25N 3,25 0,1 9 0,05–0,12 ±0,02 ±0,02 b b
GX16-2S0.60R/L 0,6 0 0,75 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S0.80R/L 0,8 0 0,94 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S1.00R/L 1 0 1,14 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S1.20R/L 1,2 0 1,34 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S1.40R/L 1,4 0 1,53 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S1.70R/L 1,7 0 1,82 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S1.95R/L 1,95 0 2,07 16 0,05–0,10 ±0,02 ±0,02 b b
GX16-2S2.25R/L 2,25 0 2,36 16 0,05–0,12 ±0,02 ±0,02 b b
GX16-2S2.75N 2,75 0,1 16 0,05–0,12 ±0,02 ±0,02 b b
GX16-2S3.25N 3,25 0,1 16 0,07–0,14 ±0,02 ±0,02 b b
GX16-3S4.25N 4,25 0,2 16 0,07–0,20 ±0,02 ±0,02 b b
GX16-4S5.25N 5,25 0,2 16 0,08–0,20 ±0,02 ±0,02 b b
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
A 394 A 396 A 294 A 296

Grooving
GX...N
Grooving and recessing
lTol. r
Tiger·tec® Silver r
Cutting inserts
A2
P M K S H
HC HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
WKP33S
WKP33S
WKP13S
WKP13S
WKP13S
s r l f ap STol lTol
GX09-1E200N02-UF4 2 0,2 9 0,10–0,15 0,3–1,0 ±0,05 ±0,15 bc bc bc
GX09-2E300N03-UF4 3 0,3 9 0,10–0,20 0,4–1,5 ±0,05 ±0,15 bc bc bc
GX16-1E200N02-UF4 2 0,2 16 0,10–0,15 0,3–1,2 ±0,05 ±0,15 a abcabc b abc
GX16-1E239N02-UF4 2,39 0,2 16 0,10–0,15 0,3–1,3 ±0,05 ±0,15 bc bc bc
GX16-1E250N02-UF4 2,5 0,2 16 0,10–0,18 0,3–1,3 ±0,05 ±0,15 a abcabc b abc
GX16-3E400N04-UF4 4 0,4 16 0,10–0,30 0,5–2,8 ±0,05 ±0,15 a bc bc b bc
GX16-3E500N04-UF4 5 0,4 16 0,12–0,35 0,5–3,0 ±0,05 ±0,15 a bc bc b bc
GX16-4E600N05-UF4 6 0,5 16 0,14–0,40 0,6–3,5 ±0,05 ±0,15 a bc bc b bc
GX24-2E318N03-UF4 3,18 0,3 24 0,10–0,20 0,4–2,0 ±0,05 ±0,15 bc bc bc
GX24-3E400N08-UF4 4 0,8 24 0,10–0,30 0,9–2,8 ±0,05 ±0,15 a b b b b
GX24-3E475N04-UF4 4,75 0,4 24 0,12–0,35 0,5–3,0 ±0,05 ±0,15 a bc bc b bc
GX24-3E500N08-UF4 5 0,8 24 0,12–0,35 0,9–3,0 ±0,05 ±0,15 a b b b b
GX24-4E600N08-UF4 6 0,8 24 0,14–0,40 0,9–3,5 ±0,05 ±0,15 a b b b b
GX24-4E635N05-UF4 6,35 0,5 24 0,14–0,40 0,6–3,5 ±0,05 ±0,15 a bc bc b bc
GX30-5E800N08-UF4 8 0,8 30 0,18–0,55 0,9–4,0 ±0,05 ±0,15 a ab ab b ab
GX30-5E800N12-UF4 8 1,2 30 0,18–0,55 1,3–4,0 ±0,05 ±0,15 a ab ab b ab
GX16-1E200N02-UD6 2 0,2 16 0,06–0,15 0,3–1,2 ±0,05 ±0,15 ab ab ab
GX16-1E250N02-UD6 2,5 0,2 16 0,06–0,18 0,3–1,3 ±0,05 ±0,15 ab ab ab
GX16-2E300N03-UD6 3 0,3 16 0,10–0,20 0,4–2,0 ±0,05 ±0,15 ab ab ab
GX16-3E400N04-UD6 4 0,4 16 0,12–0,25 0,5–2,8 ±0,05 ±0,15 ab ab ab
GX16-3E500N04-UD6 5 0,4 16 0,12–0,30 0,5–3,0 ±0,05 ±0,15 ab ab ab
GX16-4E600N05-UD6 6 0,5 16 0,14–0,35 0,6–3,5 ±0,05 ±0,15 ab ab ab
GX24-2E300N03-UD6 3 0,3 24 0,10–0,20 0,4–2,0 ±0,05 ±0,15 ab ab ab
GX24-3E400N04-UD6 4 0,4 24 0,12–0,25 0,5–2,8 ±0,05 ±0,15 ab ab ab
GX24-3E500N04-UD6 5 0,4 24 0,12–0,30 0,5–3,0 ±0,05 ±0,15 ab ab ab
GX24-4E600N05-UD6 6 0,5 24 0,14–0,35 0,6–3,5 ±0,05 ±0,15 ab ab ab
A 394 A 396 A 294 A 296

Grooving
GX...N
Grooving and recessing
lTol. r
Tiger·tec® Silver r
Cutting inserts
A2
P M K S H
HC HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
WKP33S
WKP33S
WKP13S
WKP13S
WKP13S
GX16-1E200N02-UD4 2 0,2 16 0,10–0,15 0,3–1,2 ±0,05 ±0,15 a b b b b
GX16-2E300N03-UD4 3 0,3 16 0,10–0,20 0,4–2,0 ±0,05 ±0,15 a b b b b
GX16-3E400N04-UD4 4 0,4 16 0,10–0,30 0,5–2,8 ±0,05 ±0,15 a b b b b
GX16-3E500N04-UD4 5 0,4 16 0,12–0,35 0,5–3,0 ±0,05 ±0,15 a b b b b
GX24-2E300N03-UD4 3 0,3 24 0,10–0,20 0,4–2,0 ±0,05 ±0,15 aab b b abc b
GX24-2E318N03-UD4 3,18 0,3 24 0,10–0,20 0,4–2,0 ±0,05 ±0,15 a b
GX16-1E200N02-UA4 2 0,2 16 0,08–0,15 0,3–1,2 ±0,05 ±0,15 a a
GX16-2E300N03-UA4 3 0,3 16 0,10–0,22 0,4–2,0 ±0,05 ±0,15 a b a c
GX16-3E400N04-UA4 4 0,4 16 0,10–0,35 0,5–2,8 ±0,05 ±0,15 a b a c
GX16-3E500N04-UA4 5 0,4 16 0,12–0,35 0,5–3,0 ±0,05 ±0,15 a b a c
GX16-4E600N05-UA4 6 0,5 16 0,14–0,40 0,6–3,5 ±0,05 ±0,15 a b a c
GX24-2E300N03-UA4 3 0,3 24 0,10–0,22 0,4–2,0 ±0,05 ±0,15 a b a c
GX24-3E400N04-UA4 4 0,4 24 0,10–0,35 0,5–2,8 ±0,05 ±0,15 a b a c
GX24-3E500N04-UA4 5 0,4 24 0,12–0,35 0,5–3,0 ±0,05 ±0,15 a b a c
GX24-4E600N05-UA4 6 0,5 24 0,14–0,40 0,6–3,5 ±0,05 ±0,15 a b a c
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
A 394 A 396 A 294 A 296

Grooving
GX...N
Grooving and copy turning
lTol.
®
Tiger·tec Silver r
Cutting inserts
A2
P M K N S
HC HC HC HW HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WSM13S
WSM13S
WSM13S
WKP23S
WKP23S
WK1
GX24-4R300N-RK8 6 3 25,4 0,10–0,60 0,1–4,0 ±0,02 ±0,05 a
GX24-5R400N-RK8 8 4 25,4 0,10–0,80 0,1–5,0 ±0,02 ±0,05 a
GX16-1E200N10-RF8 2 1 16 0,08–0,25 0,1–1,0 ±0,02 ±0,02 ab ab ab

GX16-2E300N15-RF8 3 1,5 16 0,10–0,30 0,1–1,5 ±0,02 ±0,02 ab ab ab
GX24-2E300N15-RF8 3 1,5 24 0,10–0,30 0,1–1,5 ±0,02 ±0,02 ab ab ab
GX24-2E318N16-RF8 3,18 1,59 24 0,10–0,30 0,1–1,5 ±0,02 ±0,02 b b b
GX24-3E400N20-RF8 4 2 24 0,12–0,45 0,1–2,0 ±0,02 ±0,02 ab ab ab
GX24-3E475N24-RF8 4,75 2,38 24 0,15–0,50 0,1–2,3 ±0,02 ±0,02 b b b
GX24-3E500N25-RF8 5 2,5 24 0,15–0,50 0,1–2,5 ±0,02 ±0,02 ab ab ab
GX24-4E600N30-RF8 6 3 24 0,15–0,55 0,1–3,0 ±0,02 ±0,02 ab ab ab
GX24-4E635N32-RF8 6,35 3,18 24 0,15–0,55 0,1–3,0 ±0,02 ±0,02 b b b
GX30-5E800N40-RF8 8 4 30 0,18–0,60 0,2–4,0 ±0,02 ±0,02 ab ab ab
GX16-1E200N10-RD4 2 1 16 0,08–0,25 0,2–1,0 ±0,05 ±0,15 a ab ab b ab
GX16-1E239N12-RD4 2,39 1,2 16 0,08–0,25 0,2–1,0 ±0,05 ±0,15 b b b
GX16-2E300N15-RD4 3 1,5 16 0,10–0,35 0,5–1,5 ±0,05 ±0,15 ab ab ab
GX24-2E300N15-RD4 3 1,5 24 0,10–0,35 0,5–1,5 ±0,05 ±0,15 a b b b b
GX24-2E318N16-RD4 3,18 1,59 24 0,10–0,35 0,5–1,5 ±0,05 ±0,15 a b b b b
GX24-3E400N20-RD4 4 2 24 0,15–0,50 0,5–2,0 ±0,05 ±0,15 a b b b b
GX24-3E475N24-RD4 4,75 2,38 24 0,17–0,60 0,5–2,3 ±0,05 ±0,15 a b b b b
GX24-3E500N25-RD4 5 2,5 24 0,17–0,60 0,5–2,5 ±0,05 ±0,15 a b b b b
GX24-4E600N30-RD4 6 3 24 0,17–0,70 0,5–3,0 ±0,05 ±0,15 a b b b b
GX24-4E635N32-RD4 6,35 3,18 24 0,17–0,70 0,5–3,0 ±0,05 ±0,15 a b b b b
GX30-5E800N40-RD4 8 4 30 0,20–0,80 0,6–4,0 ±0,05 ±0,15 a b b b b
Radius tolerance rTol = ±0.05 mm HW = Uncoated carbide
A 394 A 396 A 294 A 296

Grooving
Semi-finished blanks for special profiles

GX cutting inserts
Blanks for special profiles

A2
P M K S
HC HF HC HF HC HC HF
WSM43S
WSM43S
WSM43S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
WMG40
WMG40
WMG40
s b l
GX16-1E3.30N 3,3 1,4 16,6 c c c
GX16-2E4.30N 4,3 2,1 16,6 c c c
GX16-3E6.30N 6,3 3,05 16,6 c c c
GX16-4E8.30N 8,3 4,3 16,6 c c c
GX24-2E4.80N 4,8 2,1 24,6 c c c
GX24-3E6.30N 6,3 3,05 24,6 c c c
GX24-4E8.30N 8,3 4,3 24,6 c c c
GX24-5E10.30N 10,3 6,2 24,6 c c c
Grade WMG40 has the ISO ranges of applications P30, M30 and S30 HC = Coated carbide
HF = Uncoated fine-grained carbide

Grooving
SX...N SX...R SX...L

Grooving and parting off χ
r r r
SX cutting inserts S S S
® 6°
χ
r
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM23S
WSM23S
WSM23S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r f STol lTol
Designation mm mm κ mm mm mm
SX-1E150N01-CF6 1,5 0,15 0,03–0,10 ±0,05 ±0,1 bc bc bc
SX-2E200N02-CF6 2 0,2 0,03–0,12 ±0,05 ±0,1 bc bc bc
SX-3E300N02-CF6 3 0,2 0,04–0,20 ±0,05 ±0,1 bc bc bc
SX-1E150N01-CF5 1,5 0,15 0,03–0,10 ±0,05 ±0,1 bc bc bc

SX-1E150R/L6-CF5 1,5 0,15 6° 0,03–0,08 ±0,05 ±0,1 bc bc bc
SX-1E150R/L7-CF5 1,5 0 7° 0,03–0,08 ±0,05 ±0,1 bc bc bc
SX-1E150R/L15-CF5 1,5 0 15° 0,03–0,08 ±0,05 ±0,1 b b b
SX-2E200N02-CF5 2 0,2 0,04–0,12 ±0,05 ±0,1 bc bc bc
SX-2E200R/L6-CF5 2 0,2 6° 0,04–0,10 ±0,05 ±0,1 bc bc bc
SX-2E200R/L7-CF5 2 0 7° 0,04–0,10 ±0,05 ±0,1 bc bc bc
SX-2E200R/L15-CF5 2 0 15° 0,03–0,08 ±0,05 ±0,1 b b b
SX-3E300N02-CF5 3 0,2 0,08–0,20 ±0,05 ±0,1 bc bc bc
SX-3E300R/L6-CF5 3 0,2 6° 0,08–0,17 ±0,05 ±0,1 bc bc bc
SX-3E300R/L7-CF5 3 0 7° 0,08–0,17 ±0,05 ±0,1 bc bc bc
SX-3E300R/L15-CF5 3 0 15° 0,05–0,15 ±0,05 ±0,1 b b b
SX-3E310N03-CF5 3,1 0,3 0,08–0,20 ±0,05 ±0,1 bc bc bc
SX-4E400N02-CF5 4 0,2 0,10–0,22 ±0,05 ±0,1 bc bc bc
SX-4E400R/L6-CF5 4 0,2 6° 0,10–0,20 ±0,05 ±0,1 bc bc bc
SX-5E500N04-CF5 5 0,4 0,10–0,25 ±0,05 ±0,1 bc bc bc
SX-5E500R/L6-CF5 5 0,4 6° 0,10–0,20 ±0,05 ±0,1 bc bc bc
SX-6E600N04-CF5 6 0,4 0,10–0,30 ±0,05 ±0,1 bc bc bc
SX-1E150N01-CE4 1,5 0,15 0,03–0,12 ±0,05 ±0,1 bc bc bc
SX-1E150R/L6-CE4 1,5 0,15 6° 0,03–0,08 ±0,05 ±0,1 bc bc bc
SX-2E200N02-CE4 2 0,2 0,06–0,15 ±0,05 ±0,1 aabcabcbabc
SX-2E200R/L6-CE4 2 0,2 6° 0,06–0,10 ±0,05 ±0,1 bc bc bc
SX-2E260N03-CE4 2,6 0,3 0,06–0,18 ±0,05 ±0,1 abcabc abc
SX-3E300R/L6-CE4 3 0,2 6° 0,09–0,20 ±0,05 ±0,1 a bc bcb bc
SX-3E310N03-CE4 3,1 0,3 0,09–0,30 ±0,05 ±0,1 a bc bcb bc
SX-4E400R/L6-CE4 4 0,2 6° 0,10–0,22 ±0,05 ±0,1 a bc bcb bc
SX-4E410N03-CE4 4,1 0,3 0,10–0,32 ±0,05 ±0,1 a bc bcb bc
SX-4E480N03-CE4 4,8 0,3 0,12–0,35 ±0,05 ±0,1 bc bc bc
SX-5E500R/L6-CE4 5 0,4 6° 0,12–0,25 ±0,05 ±0,1 bc bc bc
SX-6E600N04-CE4 6 0,4 0,12–0,40 ±0,05 ±0,1 a bc bcb bc
SX-6E600R/L6-CE4 6 0,4 6° 0,12–0,30 ±0,05 ±0,1 bc bc bc
SX-8E800N08-CE4 8 0,8 0,20–0,55 ±0,05 ±0,1 a bc bcb bc
SX-10E1000N08-CE4 10 0,8 0,25–0,60 ±0,05 ±0,1 a bc bcb bc
A 394 A 396 A 294

Grooving
SX...N SX...R SX...L

Slitting χ
r r r
SX cutting inserts S S S
® 6°
χ
r
Cutting inserts
A2
P M K S
HC HC HC HC
WSM43S
WSM43S
WSM43S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
s r f STol lTol
Designation mm mm κ mm mm mm
SX-1E150N01-SF5 1,5 0,15 0,03–0,10 ±0,05 ±0,1 bcbc bc
SX-2E200N02-SF5 2 0,2 0,06–0,15 ±0,05 ±0,1 bcbc bc
SX-3E300N02-SF5 3 0,2 0,08–0,20 ±0,05 ±0,1 bcbc bc
SX-4E400N02-SF5 4 0,2 0,10–0,22 ±0,05 ±0,1 bcbc bc
SX-5E500N04-SF5 5 0,4 0,10–0,25 ±0,05 ±0,1 bcbc bc
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
mac hining cond
A 394 A 396 A 294

Grooving
Semi-finished parts for special profiles s b
SX cutting inserts 6° r
Blanks for special profiles

A2
P M K S
HC HF HC HF HC HC HF
WSM43S
WSM43S
WSM43S
WSM33S
WSM33S
WSM33S
WKP23S
WKP23S
WMG40
WMG40
WMG40
s b
Designation mm mm
SX-2E320N00-SF5 3,2 2,2 c c c
SX-3E420N00-SF5 4,2 2,6 c c c
SX-4E520N00-SF5 5,2 3,6 c c c
SX-5E620N00-SF5 6,2 4,5 c c c
SX-6E820N00-SF5 8,2 5,5 c c c
Grade WMG40 has the ISO ranges of applications P30, M30 and S30 HC = Coated carbide
HF = Uncoated fine-grained carbide

A 289
Grooving
Walter Cut product description
Tool families for grooving – GX
G1011 monoblock tool

A2 – For GX cutting inserts
– For grooving, parting off and longitudinal turning
– For all types of lathe
– Access to the screw from above and below; extremely easy tool handling – even in overhead use
– Excellent chip evacuation thanks to low clamp profile
– Grooving up to a maximum cutting depth of 32 mm
– Insert widths from 2-8 mm
– Shank sizes: 10 × 10 mm, 12 × 12 mm, 16 × 16 mm, 20 × 20 mm, 25 × 25 mm and 32 × 32 mm
G1011-P monoblock tool with precision cooling

– Precision cooling on the rake face and flank face
– Longer tool life and higher productivity thanks to optimum cooling directly in the cutting zone starting
from a coolant pressure as low as 10 bar
– Shank sizes: 12 × 12 mm, 16 × 16 mm, 20 × 20 mm, 25 × 25 mm and 32 × 25 mm
XLDE monoblock tool for parting off

– Simple tool handling thanks to angular access to clamping screw
– Quick insert replacement time thanks to insert replacement in the machine
– For parting off diameters of up to 32 mm
– Insert widths 1.5-3 mm
– Shank sizes: 10 × 10 mm, 12 × 12 mm, 16 × 16 mm and 20 × 20 mm for use on long centre lathes and
multi-spindle machines
G1042 deep parting blade

– Stable four-point clamping
– Simple tool handling
– Defined clamping force
– One tooling system for single and double-edged cutting inserts
– Cost-effective, double-edged parting off solution with cutting depth of up to 23 mm
– Single-edged parting off solution with cutting depth of up to 60 mm
– Insert widths 2-6 mm
– Blade heights of 26 and 32 mm
G1041 parting blade, reinforced design

– Maximum process reliability thanks to stable tool design
– Maximum cost efficiency thanks to double-sided cutting inserts for parting off operations
– Optimum cutting insert retention thanks to Torx Plus screw clamping and insert seat design
– Little tool deflection due to reinforced tool body
– Longer tool life due to reduction in micro vibration
– Insert widths 1.5-4 mm
– Grooving to a cutting depth of 33 mm and parting off up to a diameter of 65 mm
– Available in right-hand, left-hand and contra versions
– Blade heights of 26 and 32 mm
G1041-P parting blade, reinforced design with precision cooling

A 290 Walter Cut grooving tools

Grooving
Tool families for grooving – GX
Walter Cut Modular

– Two different grooving systems can be used A2
– For GX and SX cutting inserts
– Maximum grooving flexibility
– Low inventory requirements
– Short set-up times
– Insert widths of 0.6-8 mm
– In Walter Capto™ C3, C4, C5 and C6
G1111 monoblock tool for axial grooving

– For GX24 cutting inserts
– For grooving and recessing
– Grooving to a cutting depth of up to 25 mm
– Shank size 25 × 25 mm
G15 . . monoblock tool for shallow cutting depths

– For GX cutting inserts
– For grooving, recessing and relief turning
– Grooving to a cutting depth of up to 6 mm
– Insert widths of 2-6 mm with a single tool
– Shank sizes: 12 × 12 mm, 16 × 16 mm, 20 × 20 mm and 25 × 25 mm
G1511-P monoblock tool for shallow cutting depths with precision cooling
– Precision cooling on the rake face
– Shank sizes: 16 × 16 mm, 20 × 20 mm and 25 × 25 mm
Walter Cut grooving tools A 291

Grooving
Walter Cut product description

(continued)
Tool families for grooving – SX
G2012 monoblock tool

A2 – For SX cutting inserts
– For grooving and parting off
– For all types of lathe
– Stable self-clamping system using top clamp
– Shank sizes: 16 × 16 mm, 20 × 20 mm and 25 × 25 mm
G2012-P monoblock tool with precision cooling

G2042-N deep parting blade

– For SX cutting inserts
– Two insert seats on one tool
– Stable self-clamping system using top clamp
– Simple tool handling
– Cost-effective, single-edged parting off solution for a cutting depth of up to 80 mm/a parting-off diameter
of up to 160 mm
– Blade heights: 26 mm, 32 mm and 46 mm
G2042-N-P deep parting blades with precision cooling

– Coolant transfer with no external protrusion
– Cost-effective, single-edged parting off solution for a cutting depth of up to 100 mm/a parting-off diameter
of up to 200 mm
G2042-R/L parting blade, reinforced design

– For SX cutting inserts
– Maximum process reliability thanks to stable tool design
– Little tool deflection due to reinforced tool body
– Longer tool life due to reduction in micro vibration
– Available in right-hand/left-hand and contra version
– Blade heights of 26 mm and 32 mm
G2042-R/L-P parting blade, reinforced design with precision cooling


Grooving
Tool adaptors for parting blades
SBN clamping block

– One-piece clamp A2
– Left-hand/right-hand variant in one block
– Shank dimensions: 20 × 20 mm, 25 × 20 mm, 32 × 29 mm and 40 × 37 mm
G2661-P clamping block for parting blades with precision cooling

– Easy clamping block handling thanks to inclined clamping screw and split clamp
– Left-hand/right-hand variant in one block
– Clamping blocks with direct coolant transfer for precision-cooled parting blades
– No vibration thanks to stable toolholder design with rigid clamping
– Shank dimensions: 20 × 20 mm, 25 × 25 mm, 32 × 25 mm and 40 × 32 mm
A2110-P VDI axial adaptor for parting blades with precision cooling
– VDI25/30/40 for star turrets
– For grooving and parting off with internal cooling
– Transfer of the coolant directly through the VDI interface into the precision-cooled parting blade
– Flexibility: One toolholder for standard and overhead installation positions
– Short chips, meaning no downtime for removing accumulated chips
– O-ring seal for reliable coolant transfer in the 10-80 bar range with no loss of pressure
– Precise centre position thanks to easily adjustable centre height in a range of ±0.5 mm
A2111-P VDI radial adaptor for parting blades with precision cooling
– VDI30/40 for disc turrets
– Transfer of the coolant directly through the VDI interface into the precision-cooled parting blade
– No vibration thanks to stable toolholder design, adjustable to every machining position
– Precise centre position thanks to easily adjustable centre height in a range of ±0.5 mm
A2110-P BMT/Doosan axial adaptors for parting blades with precision cooling
– BMT45/55/65 and Doosan interface for bolt-on turrets
– Transfer of the coolant directly through the adaptor into the precision-cooled parting blade
– Precise centre position thanks to easily adjustable centre height in the ±0.5 mm range
– Additional machine-specific interfaces are available on request

Grooving
Walter Cut grooving tools product range overview

Shank tools/parting blades/boring bars
Shank tools for grooving, parting off and recessing
Machining
A2
Type
Designation G1011 G1011...-P G1511 G1511...-P G1521 G1551

Insert width s [mm] 2–8 2–8 2–6 2–6 2–6 2–6
Cutting depth Tmax [mm] 8–32 12–32 4–6 4–6 4–6 6
Coolant supply external Precision cooling external Precision cooling external external
Shank size h [mm] 12–32 16–32 12–25 16–25 16–25 20–25
Page A 308 A 310 A 314 A 316 A 315 A 317
Machining
Type
Designation NCAE/NCBE NCLE NCCE NCNE

Insert width s [mm] 2–8 2–8 0,6–2,3 0,6–2,3
Cutting depth Tmax [mm] 7–21 12–21 2–3 3
Coolant supply external external external external
Shank size h [mm] 16–32 20–32 12–32 20–32
Page A 338 A 340 A 342 A 344
Shank tools for grooving and parting off
Machining
Type
Designation XLDE XLDE...C G2012 G2012...-P G2612 G2622

Insert width s [mm] 1,5–3 1,5–3 1,5 2–10 2–8 2–8
Cutting depth Tmax [mm] 5–16 5–16 15 16–45 20–45 20–45
Coolant supply external external external Precision cooling external external
Shank size h [mm] 10–20 10–20 12–20 12–32 20–32 20–32
Page A 312 A 313 A 326 A 328 A 348 A 350

Grooving

Parting blades for grooving and parting off
Machining
A2
Type
Designation G1041 G1041...C G1041...C-P XLCFN G1042 G1332

Insert width s [mm] 1,5–4 1,5–4 2–4 3–6 2–6 1,5–3
Cutting depth Tmax [mm] 16–32 16–32 16–32 21 25–60 15
Coolant supply external external Precision cooling external external external
Shank size h4 [mm] 26–32 26–32 26–32 32 26–32
Page A 321 A 322 A 323 A 324 A 320 A 347
Machining
Type
Designation G2042...R/L G2042...R/L...-P G2042...R/L...C G2042...R/L...C-P G2042...N G2042...N...-P

Insert width s [mm] 1,5–4 2–3 2–4 2–4 2–6 3–10
Cutting depth Tmax [mm] 20–33 26–33 26–33 26–33 30–80 38–100
Coolant supply external Precision cooling external Precision cooling external Precision cooling
Shank size h4 [mm] 26–32 26–32 26–32 26–32 26–46 26–52
Page A 332 A 334 A 333 A 335 A 330 A 331
Clamping blocks
Type
Designation SBN G2661...-P

Blade height h4 [mm] 26–32 26–52
Coolant supply external Precision cooling
Shank size h [mm] 20–32 16–40
For more adaptors with VDI, BMT,

etc. interfaces, see the Adaptors
Page A 336 A 337 catalogue.

Grooving

Shank tools for axial grooving
Machining
A2
Type
Designation G1111 NCEE NCHE NCFE NCFE...C NCOE

Insert width s [mm] 3–6 3–6 3–6 4–6 4–6 4–6
Shank size h [mm] 25 20–32 20–32 25 25 25
Page A 318 A 352 A 354 A 356 A 358 A 360
Machining
Type
Designation NCOE...C
Insert width s [mm] 4–6
Cutting depth Tmax [mm] 21–25
Coolant supply external
Shank size h [mm] 25
Page A 362
Boring bars for internal grooving
Machining
Type
Designation I12 NCAI NCCI

Insert width s [mm] 2–2,5 2–6 0,6–2,3
Cutting depth Tmax [mm] 3 4–19 2–5
Coolant supply internal internal internal
Shank size d1 [mm] 16 20–50 20–50
Page A 325 A 364 A 366

Grooving

Walter Capto™ groove turning holders
Grooving, parting off and recessing
Machining
A2
Type
Designation C...-NCAE/ C...-NCBE C...-NCLE C...-NCCE C...-NCNE

Insert width s [mm] 2–8 2–8 0,6–2,3 0,6–2,3
Cutting depth Tmax [mm] 7–21 12–21 2–3 3
Coolant supply internal internal internal internal
Walter Capto™ size C3–C6 C3–C6 C3–C6 C3–C6
Page A 368 A 372 A 374 A 376
Grooving and parting off
Machining
Type
Designation C...-G2612 C...-G2622

Insert width s [mm] 2–8 2–8
Cutting depth Tmax [mm] 20–45 20–45
Page A 378 A 380
Axial grooving
Machining
Type
Designation C...-NCEE C...-NCHE C...-NCFE C...-NCFE...C C...-NCOE C...-NCOE...C

Insert width s [mm] 3–6 3–6 4–6 4–6 4–6 4–6
Page A 382 A 384 A 386 A 388 A 390 A 392

Grooving
Grooving system overview – Walter Cut external machining
VDI adaptors for square shanks Walter Capto™ adaptors Walter Capto™ adaptors
with precision cooling for square shanks for grooving modules
A2
C…-ASHR/L
A2120-VDI-P A2121-VDI-P C…-ASHR/L3 C…-ASHA C ….MSS…00 C ….MSS…90
One-piece shank tools Shank tools for grooving modules
e.g. G1011…-P e.g. G2012 MSS…00 MSS…90

from page A 294 from page A 294 from page A 338 from page A 340
Grooving modules
SX: GX:
G2632 MSS-E…GX
from page A 348 from page A 338
= Precision cooling

Grooving
Grooving system overview – Walter Cut parting blades
BMT or Doosan adaptors

VDI adaptors for parting blades Clamping blocks
for parting blades
with precision cooling for parting blades
with precision cooling
A2
A2110…-P A2111…-P A2110-BT…-P A2110-DO…-P SBN G2661…-P

Neutral parting blades Reinforced parting blades
e.g. G1042 e.g. G2042…N…-P e.g. G2042…R/L…-P

Page A 295 Page A 295 Page A 295
Grooving system overview – Walter Cut internal machining
Adaptors for boring bars
C … -131 C … -391.20 / C … -391.27

Page D 65 Page D 66
One-piece boring bars Boring bars with grooving module
GX grooving modules
e.g. I12 e.g. NCAI MSS-I…GX

Page A 296 Page A 296 from page A 364

Grooving
Designation key for Walter Cut grooving tools

Example:
G 1 1 11 – 2020 R – 3 T33 – 090 GX24 – C – P

A2
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4
Tool group Generation Tool type Tool type
G Grooving 1 GX 0 Radial grooving tool 11 Angled at 0°,

straight clamping screw
2 SX 1 Axial grooving tool
12 Angled at 0°,
5 Universal – Shallow Depth self-clamping system
6 Modular external 21 Angled at 90°,

radial grooving straight clamping screw
22 Angled at 90°,
self-clamping system
32 Grooving module,
41 Parting blade,
clamping screw
42 Parting blade,
51 Angled at 45°,
straight clamping screw
61 Clamping block/split
8 9 10
Minimum axial grooving diameter/
Cutting depth/parting off diameter Indexable insert type
blade height
T06 6 mm Minimum axial grooving diameter

9 mm
T12 12 mm 034 Ø 34 mm Dmin GX09
Dmax
T21 21 mm 042 Ø 42 mm
T32 32 mm 054 Ø 54 mm 16 mm
GX16
T33 33 mm 067 Ø 67 mm
T35 35 mm 090 Ø 90 mm
24 mm
D16 Ø 16 mm 130 Ø 130 mm
GX24
Tmax
D32 Ø 32 mm 220 Ø 220 mm
Dmax
30 mm
Blade height GX30
26 26 mm
32 32 mm
SX
52 52 mm

Grooving
A2
5 6 7
Shank size Toolholder design Cutting edge width
h
1,5 1,5 mm
Square shank Module size h1
2 2 mm
1010 10 × 10 mm E12 12 mm 3 3 mm
1212 12 × 12 mm E16 16 mm
4 4 mm
1616 16 × 16 mm E20 20 mm
5 5 mm
2020 20 × 20 mm E25 25 mm
6 6 mm
2525 25 × 25 mm E32 32 mm
8 8 mm
3225 32 × 25 mm
10 10 mm
3232 32 × 32 mm
h1 L R
4032 40 × 32 mm
R Right
L Left
N Neutral
h1
11 12
Version Cooling
–C Contra –P Precision cooling

Grooving
Designation key for Walter Cut – Modular grooving tools (used up to 09/2012)
Example for axial grooving 0°:
NC E E 25 - 2525 R - GX 24 - 3 - 2 - C
A2
1 2 3 4 5 6 7 8 9 10 11
1 2 3
Tool range Machining method Machining
NC Walter Cut A 0° radial grooving H 90° axial grooving E External machining

and turning GX and facing GX
I Internal machining
B 0° radial grooving L 90° radial grooving
and turning GX and turning GX
C 0° circlip and N 90° circlip and O-ring

O-ring grooves GX grooves GX
E 0° axial grooving O 90° deep axial grooving

and facing GX and facing GX
F 0° deep axial grooving

and facing GX
6 7 8 9
Insert length GX Width category
Toolholder design Grooving system
[mm] GX
R Right GX Grooving, 09 1
double-edged
L Left 16 2
N Neutral 24 3

Grooving
A2
4 5
Module size Shank dimensions [mm]/Walter Capto™
12 External toolholder Walter Capto™ Boring bar
16 Height Width External d1 d/l
12 12 C3 00 = C3 20 1/1,5 = 15
20
16 16 C4 00 = C4 25 1/2,5 = 25
25
20 20 C5 00 = C5 32
32
25 25 C6 00 = C6 40
40 32 25
10 11
Axial diameter range
Version
[mm]
1 50–70 C Contra
2 70–100
3 100–150
4 150–300
5 300–900

Grooving
Walter Select – Groove turning holder for parting off/grooving/recessing
External machining – Radial
Application
A2
Access restrictions
in the machine
Stability of the tool

+ –
Tools
Designation G1011 G1511 C . . . -NCAE NCAE

G1011 . . . -P G1511 . . . -P G1521 G1551 C . . . -NCBE NCBE
Page A 308 A 314 A 315 A 317 A 368 A 338
max. parting max.
off diameter cutting depth
Dmax [mm] Tmax [mm]
Ø8 4 CC CC CC CC CC CC
Ø 10 5 CC CC CC CC CC CC
Ø 12 6 CC CC CC CC CC CC
Ø 16 8 CC CC CC
Ø 24 12 CC CC CC
Ø 32 16 CC CC CC
Ø 42 21 CC CC CC
Ø 52 26 CC
Ø 65 33 CC
Ø 80 40
Ø 90 45
Ø 120 60
Ø 200 100
Insert width s [mm] 2,0–8,0 2,0–6,0 0,6–6,0 0,6–8,0
Shank height h [mm] 12–32 12–25 16–25 20–25 – 20–25
Blade height h4 [mm] – – – – – –
Walter Capto™ size d1 – – – – C3–C6 –
Cutting insert type
GX . . . E
GX . . . F
*
-P = Precision cooling (first choice)

Grooving
A2
– Deep grooves
– Long tool/counter spindle projection
+ –
G2012 C . . . -G2612 G2612 G1041 . . . R/L G2042 . . . R/L G2042 . . . N

XLDE G2012 . . . -P C . . . -G2622 G2622 G1041 . . . R/L . . . -P G1042 . . . N G2042 . . . R/L . . . -P G2042 . . . N . . . -P
A 312 A 326 A 378 A 348 A 321 A 320 A 332 A 330
CC CC CC CC CC CC CC CC
CC CC CC C C CC CC
CC CC CC C C CC CC
CC CC CC C C CC CC
CC CC CC C CC
CC CC CC C CC
C CC
CC
1,5–3,0 1,5–10,0 2,0–8,0 1,5–8,0 1,5–4,0 3,0–6,0 2,0–4,0 2,0–10,0
10–20 12–32 – 20–25 – – – –
– – – – 26–32 26–32 26–32 26–52
– – C3–C6 – – – – –
GX . . . E
SX . . . SX . . .
GX . . . F
plication
Primary ap
ation
Other applic
Grooving
Walter Select – Groove turning holder for axial grooving/recessing
External machining – Axial
Application
A2

+ –
Tools
Dmin
Dmax
Designation G1511 C . . . -NCEE NCEE

G1111 G1511 . . . -P G1521 C . . . -NCFE NCFE
Page A 318 A 314 A 315 A 386 A 356
max. cutting depth Tmax [mm]
6 CC CC CC CC CC
12 CC CC CC
15 CC CC CC
21 CC CC CC
25 C
Insert width s [mm] 3,0–6,0 2,0–6,0 3,0–6,0
Smallest Dmin [mm] 34 43 43 50 50
Shank height h [mm] 25 12–25 16–25 – 20–32
Walter Capto™ size d1 – – – C3–C6 –
Cutting insert type
GX . . . E
GX . . . F
*
-P = Precision cooling (first choice)
For detailed information regarding the Dmin and Dmax, see page A 318/A 410

Grooving
Walter Select – Internal grooving and recessing
Internal machining – Radial
Application
A2

+ –
Tools 1,5 × D 2,5 × D

in
m
D
Designation
I12 NCAI NCCI
Page A 325 A 364 A 366
max.
cutting depth
Dmin [mm] Tmax [mm]
Ø 16 3 CC
Ø 20 4 CC CC
Ø 25 5 CC CC
Ø 32 6 CC CC
Ø 40 9 CC CC
Ø 50 10 CC CC
Ø 60 19 CC CC
Insert width s [mm] 2,0–2,5 2,0–6,0 2,0–6,0
Shank diameter d1 [mm] 16 20–40 20–50
Cutting insert type
GX . . . E
plication
Primary ap
ation
Other applic

Grooving
Shank tool – Radial grooving

G1011
Walter Cut
– Screw clamping
A2
Tool s Tmax D2 h = h1 b f1 l1 l4 s1
Designation mm mm mm mm mm mm mm mm mm Type
G1011.1212R/L-2T8GX16 8 12 12 11,2 122 31,5 1,6
G1011.1212R/L-2T12GX16 12 12 12 11,2 122 31,5 1,6
s1 G1011.1616R/L-2T8GX16 8 16 16 15,2 132 35,5 1,6
h b G1011.1616R/L-2T15GX16 15 16 16 15,2 136 35,5 1,6

GX16-1E2 ..
G1011.2020R/L-2T8GX16 8 20 20 19,2 142 31,5 1,6
2
G1011.2020R/L-2T15GX16 15 20 20 19,2 146 35,5 1,6
G1011.2525R/L-2T8GX16 8 25 25 24,2 142 31,5 1,6
G1011.2525R/L-2T15GX16 15 25 25 24,2 146 35,5 1,6
G1011.1616R/L-2T21GX24 21 16 16 15,3 150 40 1,6
l1 GX24-1E2 ..
G1011.2020R/L-2T21GX24 21 20 20 19,2 150 40 1,6
G1011.1616R/L-3T12GX24 12 16 16 14,8 135 35 2,4
G1011.1616R/L-3T21GX24 21 80 16 16 14,8 150 40 2,4
G1011.2012R/L-3T21GX24 21 80 20 12 10,8 150 40 2,4
l4 GX24-2E3 ..
Tmax
G1011.2020R/L-3T12GX24 3 12 20 20 18,8 145 35 2,4
GX24-2F3 ..
s G1011.2020R/L-3T21GX24 21 80 20 20 18,8 150 40 2,4
D2 h1
f1
f G1011.2525R/L-3T12GX24 12 25 25 23,8 145 35 2,4
G1011.2525R/L-3T21GX24 21 80 25 25 23,8 150 40 2,4
G1011.1616R/L-4T12GX24 12 16 16 14,3 135 35 3,4
G1011.1616R/L-4T21GX24 21 80 16 16 14,3 150 40 3,4
G1011.2012R/L-4T21GX24 21 80 20 12 10,3 150 40 3,4
G1011.2020R/L-4T12GX24 12 20 20 18,3 145 35 3,4 GX24-3E4 ..
4
G1011.2020R/L-4T21GX24 21 80 20 20 18,3 150 40 3,4 GX24-3F4 ..
G1011.2525R/L-4T12GX24 12 25 25 23,3 145 35 3,4

G1011.2525R/L-4T21GX24 21 80 25 25 23,3 150 40 3,4
G1011.2525R/L-4T32GX24 32 25 25 23,3 165 55 3,4
G1011.2020R/L-5T12GX24 12 20 20 17,9 145 35 4,2
G1011.2020R/L-5T21GX24 21 80 20 20 17,9 150 40 4,2
GX24-3E5 ..
G1011.2525R/L-5T12GX24 5 12 25 25 22,9 145 35 4,2
GX24-3F5 ..
G1011.2525R/L-5T21GX24 21 80 25 25 22,9 150 40 4,2
G1011.2525R/L-5T32GX24 32 120 25 25 22,9 165 55 4,2
G1011.2020R/L-6T12GX24 12 20 20 17,4 145 35 5,2
G1011.2020R/L-6T21GX24 21 80 20 20 17,4 150 40 5,2
G1011.2525R/L-6T12GX24 6 12 25 25 22,4 145 35 5,2 GX24-4E6 ..
G1011.2525R/L-6T21GX24 21 80 25 25 22,4 150 40 5,2
G1011.2525R/L-6T32GX24 32 120 25 25 22,4 165 55 5,2
G1011.2525R/L-8T28GX30 28 120 25 25 22 165 55 6,1
8 GX30-5E8 ..
G1011.3232R/L-8T28GX30 28 120 32 32 29 165 55 6,1
For information on Tmax with diameters larger than D2, see “Technical information – Grooving”
f = f1 + s/2
Ordering example, right-hand tool: G1011.1212R-2T8GX16/ordering example, left-hand tool: G1011.1212L-2T8GX16
A 278 D1 A 394 A 308

Grooving
Assembly parts
h = h1 [mm] 12-32
Clamping screw for grooving insert FS2118 (Torx 20IP)
A2
A 278 D1 A 394 A 308

Grooving

G1011...-P
Walter Cut
– Screw clamping
A2
Tool s Tmax h = h1 b f1 l1 l4 s1
Designation mm mm mm mm mm mm mm mm Type
G1011.1616R/L-2T15GX16-P 15 16 16 15,2 120 35,5 1,6 GX16-1E2 ..
2
G1011.1616R/L-2T21GX24-P 21 16 16 15,3 120 40 1,6 GX24-1E2 ..
GX24-2E3 ..
h s1 G1011.1616R/L-3T21GX24-P 3 21 16 16 14,8 120 40 2,4
GX24-2F3 ..
G1/8''
b
G1/8''
l1
l4
Tmax
s
h1
f1
f
G1011.2020R/L-2T15GX16-P 15 20 20 19,2 120 35,5 1,6 GX16-1E2 ..

2
G1011.2020R/L-2T21GX24-P 21 20 20 19,2 125 40 1,6 GX24-1E2 ..
G1011.2020R/L-3T21GX24-P 21 20 20 18,8 125 40 2,4 GX24-2E3 ..
s1 3
h G1011.2525R/L-3T21GX24-P 21 25 25 23,8 130 40 2,4 GX24-2F3 ..
'' b G1011.2020R/L-4T12GX24-P 12 20 20 18,3 120 35 3,4
G1011.2020R/L-4T21GX24-P 21 20 20 18,3 125 40 3,4
GX24-3E4 ..
G1011.2525R/L-4T12GX24-P 4 12 25 25 23,3 125 35 3,4
GX24-3F4 ..
G1011.2525R/L-4T21GX24-P 21 25 25 23,3 130 40 3,4
M6 G1011.2525R/L-4T32GX24-P 32 25 25 23,3 145 55 3,4
G1011.2020R/L-5T12GX24-P 12 20 20 17,9 120 35 4,2
l1
G1011.2020R/L-5T21GX24-P 21 20 20 17,9 125 40 4,2
GX24-3E5 ..
G1011.2525R/L-5T12GX24-P 5 12 25 25 22,9 125 35 4,2
'' GX24-3F5 ..
G1011.2525R/L-5T21GX24-P 21 25 25 22,9 130 40 4,2
G1011.2525R/L-5T32GX24-P 32 25 25 22,9 145 55 4,2
l4
Tmax G1011.2525R/L-6T12GX24-P 12 25 25 22,4 125 35 5,2
G1011.2525R/L-6T21GX24-P 6 21 25 25 22,4 130 40 5,2 GX24-4E6 ..
s
h1
f1 G1011.2525R/L-6T32GX24-P 32 25 25 22,4 145 55 5,2
f
G1011.2525R/L-8T28GX30-P 28 25 25 22 145 55 6,1
8 GX30-5E8 ..
G1011.3225R/L-8T28GX30-P 28 32 25 22 145 55 6,1
f = f1 + s/2
Ordering example, right-hand tool: G1011.1616R-2T15GX16-P/ordering example, left-hand tool: G1011.1616L-2T15GX16-P
A 278 D1 A 394 A 308 A 420

Grooving
Assembly parts
h = h1 [mm] 16 20-32
Clamping screw for grooving insert FS2118 (Torx 20IP) FS2118 (Torx 20IP)
G 1/8” screw FS2258 (SW 5) FS2258 (SW 5)
M6 screw FS2288 (SW 3)

A2
A 278 D1 A 394 A 308 A 420

Grooving
Shank tool – Radial

XLDE
Walter Cut
– Screw clamping
– Angular access to clamping screw
A2
Tool s Dmax h = h1 b f1 l1 l4 s1
XLDER/L1010K-GX16-0 20 10 10 9,4 125 19 1,2
XLDER/L1212K-GX16-0 1,5 24 12 12 11,4 125 19 1,2 GX16-0E1 ..
s1 XLDER/L1616K-GX16-0 32 16 16 15,4 125 24 1,2
XLDER/L1010K-GX16-1 20 10 10 9,2 125 19 1,6
h b
XLDER/L1212K-GX16-1 24 12 12 11,2 125 19 1,6
2–2,5 GX16-1E2 ..
XLDER/L1616K-GX16-1 32 16 16 15,2 125 24 1,6
XLDER/L2020K-GX16-1 32 20 20 19,2 125 24 1,6
XLDER/L1212K-GX16-2 24 12 12 10,8 125 19 2,4
XLDER/L1616K-GX16-2 3 32 16 16 14,8 125 24 2,4 GX16-2E3 ..
l1 XLDER/L2020K-GX16-2 32 20 20 18,8 125 24 2,4
l4
s
Dmax h1
f1
f
f = f1 + s/2
Ordering example, right-hand tool: XLDER1010K-GX16-0/ordering example, left-hand tool: XLDEL1010K-GX16-0
Assembly parts
h = h1 [mm] 10-20
Screwdriver for grooving insert FS1485 (Torx 15IP)
A 278 D1 A 394 A 308

Grooving
Shank tool – Radial/contra

XLDE...C
Walter Cut
– Screw clamping
– Angular access to clamping screw
A2
Tool s Dmax h = h1 b f1 l1 l4 s1
XLDER/L1010K-GX16-0C 20 10 10 9,4 125 19 1,2
XLDER/L1212K-GX16-0C 1,5 24 12 12 11,4 125 19 1,2 GX16-0E1 ..
s1 XLDER/L1616K-GX16-0C 32 16 16 15,4 125 24 1,2

XLDER/L1010K-GX16-1C 20 10 10 9,2 125 19 1,6
h b XLDER/L1212K-GX16-1C 2–2,5 24 12 12 11,2 125 19 1,6 GX16-1E2 ..
XLDER/L1616K-GX16-1C 32 16 16 15,2 125 24 1,6
XLDER/L1212K-GX16-2C 24 12 12 10,8 125 19 2,4
3 GX16-2E3 ..
XLDER/L1616K-GX16-2C 32 16 16 14,8 125 24 2,4
l1
l4
s
Dmax f1
h1 f
f = f1 + s/2
Ordering example, right-hand tool: XLDER1010K-GX16-0C/ordering example, left-hand tool: XLDEL1010K-GX16-0C
Assembly parts
h = h1 [mm] 10-16
A 278 D1 A 394 A 308

Grooving
Shank tool – Universal

G1511
Walter Cut
– Screw clamping
A2
Tool s Tmax h = h1 b f1 l1 l4
Designation mm mm mm mm mm mm mm Type
h b G1511.1212R/L-T4GX16 4 12 12 9,9 132 31,5
G1511.1616R/L-T4GX16 4 16 16 13,9 142 31,5
GX16- ..
G1511.2020R/L-T4GX16 4 20 20 17,9 142 31,5
G1511.2525R/L-T4GX16 2–6 4 25 25 22,9 142 31,5
G1511.1616R/L-T6GX24 6 16 16 13,9 144 33,5
G1511.2020R/L-T6GX24 6 20 20 17,9 144 33,5 GX24- ..
l1
G1511.2525R/L-T6GX24 6 25 25 22,9 144 33,5
l4
Tmax
s
h1 f1
f
f = f1 + s/2
For information on the smallest possible axial groove [Dmin], see “Technical information”
Ordering example, right-hand tool: G1511.1212R-T4GX16/ordering example, left-hand tool: G1511.1212L-T4GX16
Assembly parts
h = h1 [mm] 12-25
A 278 D1 A 394 A 308

Grooving
Shank tool – 90° Universal

G1521
Walter Cut
– Screw clamping
A2
Tool s Tmax h = h1 b f l4 l21

h b G1521.1616R/L-T4GX16 4 16 16 20,5 27 134,8
G1521.2020R/L-T4GX16 4 20 20 24,5 27 134,8 GX16- ..
G1521.2525R/L-T4GX16 2–6 4 25 25 29,5 27 134,8
G1521.2020R/L-T6GX24 6 20 20 26,5 27 134,8
GX24- ..
G1521.2525R/L-T6GX24 6 25 25 31,5 27 134,8
l1 l21
Tmax
l4
h1 f s
l1 = l21 + s/2
Assembly parts
h = h1 [mm] 16-25
A 278 D1 A 394 A 308

Grooving
Shank tool – Universal

G1511...-P
Walter Cut
– Screw clamping
A2
G1511.1616R/L-T4GX16-P 4 16 16 13,9 120 31,5 GX16- ..
2–6
h G1511.1616R/L-T6GX24-P 6 16 16 13,9 120 33 GX24- ..
G1/8'' b
G1/8''
l1
l4
Tmax
h1 s
f1
f
G1511.2020R/L-T4GX16-P 4 20 20 17,9 120 31,1

GX16- ..
G1511.2525R/L-T4GX16-P 4 25 25 22,9 130 31,2
h 2–6
'' b G1511.2020R/L-T6GX24-P 6 20 20 17,9 120 33,5
GX24- ..
G1511.2525R/L-T6GX24-P 6 25 25 22,9 130 32,9
M6
l1
''
l4
Tmax
h1 s
f1
f
f = f1 + s/2
Ordering example, right-hand tool: G1511.1616R-T4GX16-P/ordering example, left-hand tool: G1511.1616L-T4GX16-P
Assembly parts
h = h1 [mm] 16 20-25
Clamping screw for grooving insert FS2118 (Torx 20IP) FS2118 (Torx 20IP)
G 1/8” screw FS2258 (SW 5) FS2258 (SW 5)
A 278 D1 A 394 A 308 A 420

Grooving
Shank tool – 45° Universal

G1551
Walter Cut
– Screw clamping
A2

h b G1551.2020R/L-T4GX16 4 20 20 21,7 141,6 31,6
GX16- ..
G1551.2525R/L-T4GX16 4 25 25 26,7 141,6 31,6
2–6
G1551.2020R/L-T6GX24 6 20 20 23,2 143,1 33,1
GX24- ..
G1551.2525R/L-T6GX24 6 25 25 28,2 143,1 33,1
l1 l21
l4 Tmax
45°
h1 f1
s
f
f = f1 + 0.707 x s/2
l1 = l21 + 0.707 x s/2
Assembly parts
h = h1 [mm] 20-25
A 278 D1 A 394 A 308

Grooving
Shank tool – Axial grooving

G1111
Walter Cut
– Screw clamping
A2
Tool s Tmax Dmin Dmax h = h1 b f1 l1 l4 s1

Designation mm mm mm mm mm mm mm mm mm mm Type
G1111.2525R/L-3T12-034GX24 12 34 44 25 25 24,7 150 40 2,4
G1111.2525R/L-3T12-042GX24 12 42 60 25 25 24,7 150 40 2,4
s1 G1111.2525R/L-3T12-054GX24 12 54 75 25 25 24,6 150 40 2,4
h b G1111.2525R/L-3T12-067GX24 12 67 100 25 25 24,6 150 40 2,4
G1111.2525R/L-3T12-090GX24 12 90 160 25 25 24,6 150 40 2,4 GX24-2E3 ..
3
G1111.2525R/L-3T12-130GX24 12 130 300 25 25 24,6 150 40 2,4 GX24-2F3 ..
G1111.2525R/L-3T19-054GX24 19 54 75 25 25 24,7 152 42 2,4

G1111.2525R/L-3T22-067GX24 22 67 100 25 25 24,7 154 44 2,3
l1 G1111.2525R/L-3T22-090GX24 22 90 160 25 25 24,6 154 44 2,3
G1111.2525R/L-3T22-130GX24 22 130 300 25 25 24,6 154 44 2,3
G1111.2525R/L-4T12-040GX24 12 40 60 25 25 24,1 150 40 3,3
l4 G1111.2525R/L-4T12-052GX24 12 52 72 25 25 24,1 150 40 3,3
Tmax G1111.2525R/L-4T12-064GX24 12 64 100 25 25 24,1 150 40 3,3
h1 s
G1111.2525R/L-4T12-092GX24 12 92 140 25 25 24,1 150 40 3,3
f1
Dmin f G1111.2525R/L-4T12-132GX24 12 132 230 25 25 24,1 150 40 3,3
Dmax
G1111.2525R/L-4T12-220GX24 12 220 500 25 25 24,1 150 40 3,3 GX24-3E4 ..
4
G1111.2525R/L-4T20-040GX24 20 40 60 25 25 24,3 152 42 3,3 GX24-3F4 ..
G1111.2525R/L-4T20-052GX24 20 52 72 25 25 24,2 152 42 3,3

G1111.2525R/L-4T25-064GX24 25 64 100 25 25 24,1 156 46 3,3
G1111.2525R/L-4T25-092GX24 25 92 140 25 25 24,1 156 46 3,3
G1111.2525R/L-4T25-132GX24 25 132 230 25 25 24,1 156 46 3,3
G1111.2525R/L-4T25-220GX24 25 220 500 25 25 24,1 156 46 3,3
G1111.2525R/L-5T12-040GX24 12 40 70 25 25 23,7 150 40 4,2
G1111.2525R/L-5T12-060GX24 12 60 95 25 25 23,7 150 40 4,2
G1111.2525R/L-5T12-085GX24 12 85 130 25 25 23,7 150 40 4,2
G1111.2525R/L-5T12-120GX24 12 120 180 25 25 23,7 150 40 4,2
G1111.2525R/L-5T12-175GX24 12 175 500 25 25 23,6 150 40 4,1 GX24-3E5 ..
5
G1111.2525R/L-5T20-040GX24 20 40 70 25 25 23,8 152 42 4,2 GX24-3F5 ..
G1111.2525R/L-5T20-060GX24 20 60 95 25 25 23,7 152 42 4,2

G1111.2525R/L-5T25-085GX24 25 85 130 25 25 23,7 156 46 4,2
G1111.2525R/L-5T25-120GX24 25 120 180 25 25 23,7 156 46 4,2
G1111.2525R/L-5T25-175GX24 25 175 500 25 25 23,7 156 46 4,2
G1111.2525R/L-6T12-040GX24 12 40 70 25 25 23,2 150 40 5
G1111.2525R/L-6T12-058GX24 12 58 100 25 25 23,2 150 40 5
G1111.2525R/L-6T12-088GX24 12 88 180 25 25 23,2 150 40 5
G1111.2525R/L-6T12-168GX24 12 168 400 25 25 23,2 150 40 5
6 GX24-4E6 ..
G1111.2525R/L-6T20-040GX24 20 40 70 25 25 23,3 152 42 5
G1111.2525R/L-6T25-058GX24 25 58 100 25 25 23,2 156 46 5
G1111.2525R/L-6T25-088GX24 25 88 180 25 25 23,2 156 46 5
G1111.2525R/L-6T25-168GX24 25 168 400 25 25 23,2 156 46 5
f = f1 + s/2
Ordering example, right-hand tool: G1111.2525R-3T12-034GX24/ordering example, left-hand tool: G1111.2525L-3T12-034GX24
A 278 D1 A 394 A 308

Grooving
Assembly parts
h = h1 [mm] 25
A2
A 278 D1 A 394 A 308

Grooving
Deep parting blade

G1042
Walter Cut
– Self-clamping system
A2
Tool s Tmax h4 l1 h1 s1
Designation mm mm mm mm mm mm Type
G1042.26N-2T25GX16 25 26 108 21,1 1,5
GX16-1E2 ..
G1042.32N-2T25GX16 25 32 149 24,8 1,5
2
s1 G1042.26N-2T40GX24 40 26 108 21,1 1,5
h4 GX24-1E2 ..
G1042.32N-2T50GX24 50 32 149 24,8 1,5
G1042.26N-3T40GX24 40 26 108 21 2,3 GX24-2E3 ..
3
G1042.32N-3T50GX24 50 32 149 24,7 2,3 GX24-2F3 ..
G1042.26N-4T40GX24 40 26 108 20,9 3,2 GX24-3E4 ..

4
G1042.32N-4T50GX24 50 32 149 24,6 3,2 GX24-3F4 ..
l1 GX24-3E5 ..
l1
G1042.32N-5T60GX24 5 60 32 149 24,5 3,9

GX24-3F5 ..
G1042.32N-6T60GX24 6 60 32 149 24,4 4,7 GX24-4E6 ..
Tmax
h1 s
Accessories
h4 [mm] 26-32
Mounting wrench for grooving
FS1494
insert
A 278 D1 A 394 A 308 A 308

Grooving
Reinforced parting blade

G1041
Walter Cut
– Screw clamping
A2
Tool s Tmax Dmax h4 l1 h1 s1

G1041.26R/L-1.5T16GX16 1,5 16 32 26 110 21 1,3 GX16-0E1 ..
G1041.26R/L-2T16GX16 16 32 26 110 21 1,5
GX16-1E2 ..
s1 G1041.32R/L-2T23GX16 23 46 32 110 24,6 1,5
h4
G1041.26R/L-2T23GX24 2 23 46 26 110 21 1,5
G1041.32R/L-2T23GX24 23 46 32 110 24,6 1,5 GX24-1E2 ..
G1041.32R/L-2T32GX24 32 65 32 110 24,6 1,5
G1041.26R/L-3T16GX16 16 32 26 110 21 2,2 GX16-2E3 ..
l1
G1041.26R/L-3T23GX24 23 46 26 110 21 2,2
3 GX24-2E3 ..
G1041.32R/L-3T23GX24 23 46 32 110 24,6 2,2
GX24-2F3 ..
Tmax
G1041.32R/L-3T32GX24 32 65 32 110 24,6 2,2
GX24-3E4 ..
Dmax G1041.32R/L-4T32GX24 4 32 65 32 110 24,6 3,1
h1 s GX24-3F4 ..
Ordering example, right-hand tool: G1041.26R-1.5T16GX16/ordering example, left-hand tool: G1041.26L-1.5T16GX16

Assembly parts
h4 [mm] 26-32
Accessories
h4 [mm] 26-32
A 278 D1 A 394 A 308

Grooving
Reinforced parting blade – Contra

G1041...C
Walter Cut
– Screw clamping
A2

G1041.26R/L-1.5T16GX16C 1,5 16 32 26 110 21 1,3 GX16-0E1 ..
G1041.26R/L-2T16GX16C 16 32 26 110 21 1,5
GX16-1E2 ..
h4
s1 G1041.32R/L-2T23GX16C 23 46 32 110 24,6 1,5
G1041.26R/L-2T23GX24C 2 23 46 26 110 21 1,5
G1041.32R/L-2T23GX24C 23 46 32 110 24,6 1,5 GX24-1E2 ..
G1041.32R/L-2T32GX24C 32 65 32 110 24,6 1,5
G1041.26R/L-3T16GX16C 16 32 26 110 21 2,2 GX16-2E3 ..
l1
G1041.26R/L-3T23GX24C 23 46 26 110 21 2,2
3 GX24-2E3 ..
G1041.32R/L-3T23GX24C 23 46 32 110 24,6 2,2
GX24-2F3 ..
Tmax G1041.32R/L-3T32GX24C 32 65 32 110 24,6 2,2
Dmax GX24-3E4 ..
h1 s G1041.32R/L-4T32GX24C 4 32 65 32 110 24,6 3,1
GX24-3F4 ..
Ordering example, right-hand tool: G1041.26R-1.5T16GX16C/ordering example, left-hand tool: G1041.26L-1.5T16GX16C

Assembly parts
h4 [mm] 26-32
Accessories
h4 [mm] 26-32
A 278 D1 A 394 A 308

Grooving

G1041...C-P
Walter Cut
– Screw clamping
A2

G1041.26R/L-2T16GX16C-P 16 32 26 110 21 1,5 GX16-1E2 ..
2
G1041.32R/L-2T23GX24C-P 23 46 32 110 24,6 1,5 GX24-1E2 ..
s1 G1041.32R/L-3T23GX24C-P 23 46 32 110 24,6 2,2 GX24-2E3 ..
3
h4 G1041.32R/L-3T32GX24C-P 32 65 32 110 24,6 2,2 GX24-2F3 ..
GX24-3E4 ..
G1041.32R/L-4T32GX24C-P 4 32 65 32 110 24,6 3,1
GX24-3F4 ..
l1
Tmax
s
h1
Dmax
Ordering example, right-hand tool: G1041.26R-2T16GX16C-P/ordering example, left-hand tool: G1041.26L-2T16GX16C-P

Assembly parts
h4 [mm] 26-32
Accessories
h4 [mm] 26-32
A 278 D1 A 394 A 308 A 308

Grooving
Deep parting blade

XLCFN
Walter Cut
– Screw clamping
A2
GX24-2E3 ..
XLCFN3203-GX24-2S 3 21 32 179 24,2 2,1
GX24-2F3 ..
GX24-3E4 ..
s1
XLCFN3204-GX24-3S 4 21 32 179 24,2 3,0
GX24-3F4 ..
h4
XLCFN3206-GX24-4S 6 21 32 179 24,2 4,2 GX24-4E6 ..
l1
Tmax
h1 s
Assembly parts
h4 [mm] 32
Clamping screw for grooving insert FS1342 (Torx 15)
Accessories
h4 [mm] 32
Handle key for grooving insert FS1047 (Torx 15)
A 278 D1 A 394 A 308

Grooving
Boring bar – Internal grooving

I12
Walter Cut
– Screw clamping
A2
Tool s Tmax Dmin d1 f l4 l21 s1

I12R/L90-2,5D-GX09 2–2,5 3 16 16 11 30 149,3 1,3 GX09-1E2 ..
d1
f
s1
s
l4
l21
l1
Dmin
Tmax
l1 = l21 + s/2
Ordering example, right-hand tool: I12R90-2.5D-GX09/ordering example, left-hand tool: I12L90-2.5D-GX09
Assembly parts
s [mm] 2–2,5
A 278 D1 A 394 A 308

Grooving

G2012
Walter Cut
A2
SX
G2012.1212R/L-1.5T15SX 15 38 12 12 11,4 120 25 1,2
G2012.1616R/L-1.5T15SX 1,5 15 38 16 16 15,4 120 25 1,2 SX-1E1 ..
s1 G2012.2020R/L-1.5T15SX 15 38 20 20 19,4 120 25 1,2
h b
l1
l4
Tmax
D2
h1 s
f1
f
f = f1 + s/2
Ordering example, right-hand tool: G2012.1212R-1.5T15SX/ordering example, left-hand tool: G2012.1212L-1.5T15SX
Accessories
h = h1 [mm] 12-20
FS2249
insert
A 286 D1 A 394 A 308 A 308

Grooving
A2

Grooving

G2012...-P
Walter Cut
A2
SX
G2012.1212R/L-2T16SX-P 16 38 12 12 11,2 120 25 1,6
2 SX-2E2 ..
G2012.1616R/L-2T16SX-P 16 38 16 16 15,2 120 25 1,6
s1 G2012.1212R/L-3T16SX-P 16 38 12 12 10,8 120 25 2,5
h
G1/8'' G2012.1616R/L-3T16SX-P 3 16 38 16 16 14,8 120 25 2,5 SX-3E3 ..
b
G2012.1616R/L-3T26SX-P 26 68 16 16 14,8 120 25 2,5
G1/8''
l1
l4
Tmax
D2
h1 s
f1
f
G2012.2020R/L-2T20SX-P 2 20 68 20 20 19,2 125 36 1,6 SX-2E2 ..

G2012.2020R/L-3T22SX-P 22 68 20 20 18,8 125 38 2,5
s1 G2012.2020R/L-3T33SX-P 3 33 68 20 20 18,8 125 38 2,5 SX-3E3 ..
h
G1/8'' G2012.2525R/L-3T33SX-P 33 68 25 25 23,8 130 45 2,5
b
G2012.2020R/L-4T33SX-P 33 20 20 18,3 130 48 3,4
4 SX-4E4 ..
G2012.2525R/L-4T33SX-P 33 25 25 23,3 130 48 3,4
G2012.2020R/L-5T33SX-P 33 20 20 17,9 130 48 4,3
5 SX-5E5 ..
G2012.2525R/L-5T40SX-P 40 25 25 22,9 145 52 4,3
M6 G2012.2525R/L-6T40SX-P 6 40 25 25 22,4 145 52 5,3 SX-6E6 ..

l1
G2012.2525R/L-8T40SX-P 40 25 25 21,6 145 55 6,8
8 SX-8E8 ..
G2012.3225R/L-8T45SX-P 45 32 25 21,6 145 60 6,8
G2012.2525R/L-10T40SX-P 40 25 25 20,6 145 55 8,8 SX-
G1/8'' 10
G2012.3225R/L-10T45SX-P 45 32 25 20,6 145 60 8,8 10E10 ..
l4
Tmax
D2
h1 s
f1
f
f = f1 + s/2
Ordering example, right-hand tool: G2012.1212R-2T16SX-P/ordering example, left-hand tool: G2012.1212L-2T16SX-P
A 286 D1 A 394 A 308 A 420 A 308

Grooving
Assembly parts
h = h1 [mm] 12-16 20-32
G 1/8” screw FS2258 (SW 5) FS2258 (SW 5)
Accessories h = h1 [mm] 12-16 20 25 25-32

A2
s [mm] 2–3 2–5 3–6 8–10
FS2249 FS1494 FS1494 FS2274
insert
A 286 D1 A 394 A 308 A 420 A 308

Grooving
Deep parting blade

G2042...N
Walter Cut
A2
SX
G2042.26N-2T30SX 30 26 110 21,1 1,6
2 SX-2E2 ..
G2042.32N-2T30SX 30 32 151 24,8 1,6
s1 G2042.26N-3T38SX 38 26 110 21 2,4
h4 3 SX-3E3 ..
G2042.32N-3T50SX 50 32 151 24,7 2,4
G2042.26N-4T40SX 40 26 110 20,9 3,4
4 SX-4E4 ..
G2042.32N-4T50SX 50 32 151 24,5 3,4
G2042.32N-5T60SX 60 32 151 24,4 4,3
5 SX-5E5 ..
G2042.46N-5T80SX 80 46 251 37,4 4,3
l1
G2042.32N-6T60SX 60 32 151 24,3 5,3
6 SX-6E6 ..
G2042.46N-6T80SX 80 46 251 37,3 5,3
Tmax
h1 s
Accessories
h4 [mm] 26-46
FS1494
insert
A 286 D1 A 394 A 308 A 308

Grooving
Deep parting blade

G2042...N...-P
Walter Cut
A2
SX
Tool s Tmax h4 b l1 h1 s1
G2042.26N-3T38SX-P 38 26 3,5 131 20,8 2,4
3 SX-3E3 ..
G2042.32N-3T45SX-P 45 32 3,5 151 24,5 2,4
s1
h4
l1
Tmax
h1 s
G2042.26N-4T40SX-P 40 26 131 20,8 3,5

4 SX-4E4 ..
G2042.32N-4T50SX-P 50 32 151 24,5 3,5
s1 G2042.32N-5T60SX-P 5 60 32 151 24,4 4,3 SX-5E5 ..
h4
G2042.32N-6T60SX-P 6 60 32 151 24,3 5,3 SX-6E6 ..
G2042.52N-8T100SX-P 8 100 52 251 44,3 6,8 SX-8E8 ..
G2042.52N-10T100SX-P 10 100 52 251 44 8,8 SX-10E10 ..
l1
Tmax
h1 s
Assembly parts h4 [mm] 26-32 32 32 52 52

s [mm] 3–4 5 6 8 10
Coolant transfer insert FS2282 FS2283 FS2284 FS2285 FS2286
Accessories
h4 [mm] 26-32 52
FS1494 FS2274
insert
A 286 D1 A 394 A 308 A 308

Grooving

G2042...R/L
Walter Cut
A2
SX

G2042.26R/L-1.5T20SX 20 40 26 110 21 1,2
1,5 SX-1E1 ..
G2042.32R/L-1.5T20SX 20 40 32 110 24,7 1,2
s1 G2042.26R/L-2T26SX 26 52 26 110 21 1,6
h4 2 SX-2E2 ..
G2042.32R/L-2T26SX 26 52 32 110 24,7 1,6
G2042.26R/L-3T33SX 33 65 26 110 21 2,4
3 SX-3E3 ..
G2042.32R/L-3T33SX 33 65 32 110 24,7 2,4
G2042.32R/L-4T33SX 4 33 65 32 110 24,7 3,4 SX-4E4 ..
l1
Tmax
Dmax
h1 s
Ordering example, right-hand tool: G2042.26R-1.5T20SX/ordering example, left-hand tool: G2042.26L-1.5T20SX
Accessories h4 [mm] 26-32 26 32

s [mm] 1,5 2–3 2–4
FS2249 FS1494 FS1494
insert
A 286 D1 A 394 A 308 A 308

Grooving

G2042...R/L...C
Walter Cut
A2
SX

G2042.26R/L-2T26SX-C 26 52 26 110 21 1,6
2 SX-2E2 ..
G2042.32R/L-2T26SX-C 26 52 32 110 24,6 1,6
s1 G2042.26R/L-3T33SX-C 33 65 26 110 21,0 2,4
h4 3 SX-3E3 ..
G2042.32R/L-3T33SX-C 33 65 32 110 24,7 2,4
G2042.32R/L-4T33SX-C 4 33 65 32 110 24,7 3,4 SX-4E4 ..
l1
Tmax
Dmax
h1 s
Ordering example, right-hand tool: G2042.26R-2T26SX-C/ordering example, left-hand tool: G2042.26L-2T26SX-C
Accessories
h4 [mm] 26-32
FS1494
insert
A 286 D1 A 394 A 308 A 308

Grooving

G2042...R/L...-P
Walter Cut
A2
SX

G2042.32R/L-2T26SX-P 2 26 52 32 110 24,7 1,6 SX-2E2 ..
G2042.26R/L-3T33SX-P 33 65 26 110 21 2,4
3 SX-3E3 ..
s1 G2042.32R/L-3T33SX-P 33 65 32 110 24,7 2,4
h4
l1
Tmax
Dmax
h1 s
Ordering example, right-hand tool: G2042.32R-2T26SX-P/ordering example, left-hand tool: G2042.32L-2T26SX-P
Accessories
h4 [mm] 26-32
FS1494
insert
A 286 D1 A 394 A 308 A 308

Grooving

G2042...R/L...C-P
Walter Cut
A2
SX

G2042.26R/L-2T26SX-C-P 26 52 26 110 21,0 1,6
2 SX-2E2 ..
G2042.32R/L-2T26SX-C-P 26 52 32 110 24,7 1,6
s1 G2042.26R/L-3T33SX-C-P 33 65 26 110 21,0 2,4
3 SX-3E3 ..
h4 G2042.32R/L-3T33SX-C-P 33 65 32 110 24,7 2,4
G2042.32R/L-4T33SX-C-P 4 33 65 32 110 24,7 3,5 SX-4E4 ..
l1
Tmax
Dmax
h1 s
Ordering example, right-hand tool: G2042.26R-2T26SX-C-P/ordering example, left-hand tool: G2042.26L-2T26SX-C-P
Accessories
h4 [mm] 26-32
FS1494
insert
A 286 D1 A 394 A 308 A 308

Grooving
Clamping block
SBN
Walter Cut
A2
– Clamping block for parting blades
Tool h4 h1 b l1
SBN2020-26-K 26 20 20 90
SBN2520-32-K 32 25 20 110
SBN3229-32-K 32 32 29 120
l1 SBN3229-46-K 46 32 29 150
SBN4037-46-K 46 40 37 150
h1 h4
Assembly parts
h4 [mm] 26–32 46
Clamping screw M06X025 ISO4762 12.9 (SW 5) M08X035 ISO4762 12.9 (SW 6)
A 295 D1 A 308

Grooving
Clamping block with internal coolant

G2661...-P
Walter Cut
A2
– Clamping block for parting blades
Tool h4 h b l1
G2661-1616N-26-P 26 16 16 95
G2661-2020N-26-P 26 20 20 95
G2661-2020N-32-P 32 20 20 95
G2661-2525N-32-P 32 25 25 95
G2661-3225N-32-P 32 32 25 95
G2661-3225N-52-P 52 32 25 140
G2661-4032N-52-P 52 40 32 140
h4 h
Assembly parts
h4 [mm] 26–32 52
Clamping wedge PK260 PK263
Clamping screw M06X020 ISO4762 12.9 (SW 5) M8X025 ISO4762 12.9 (SW 6)
O-ring O-RING 20X2 O-RING 27X2 70/80
G 1/8” screw FS2258 (SW 5) FS2258 (SW 5)
ISO 2936 key ISO2936-5 (SW 5) ISO2936-6 (SW 6)
A 295 D1 A 308

Grooving

NCAE / NCBE
Walter Cut
– Screw clamping
A2
Tool s Tmax D2 h = h1 b
Designation mm mm mm mm mm
NCAE16-1616R/L-GX09-1 2–2,5 7 52 16 16
NCAE16-1616R/L-GX09-2 3 7 52 16 16
s1 NCAE20-2020R/L-GX16-1 12 63 20 20
2–2,5
NCAE25-2525R/L-GX16-1 12 79 25 25
h b
NCAE20-2020R/L-GX16-2 12 63 20 20
NCAE25-2525R/L-GX16-2 3 12 79 25 25
NCAE32-3225R/L-GX16-2 12 100 32 25
NCAE20-2020R/L-GX16-3 12 63 20 20
NCAE25-2525R/L-GX16-3 4–5 12 79 25 25
l1
NCAE32-3225R/L-GX16-3 12 100 32 25
NCAE25-2525R/L-GX16-4 6 12 79 25 25
Tmax
s
D2 h1 f1
f
NCBE20-2020R/L-GX24-2-21 21 63 20 20
3
NCBE25-2525R/L-GX24-2-21 21 79 25 25
s1 NCBE25-2525R/L-GX24-3-21 21 79 25 25
4–5
NCBE32-3225R/L-GX24-3-21 21 100 32 25
h b
NCBE25-2525R/L-GX24-4-21 21 79 25 25
6
NCBE32-3225R/L-GX24-4-21 21 100 32 25
NCBE25-2525R/L-GX24-5-21 8 21 79 25 25
l1
Tmax
s
D2 h1 f1
f
f = f1 + s/2
Right-hand tool = right-hand toolholder + right-hand module/left-hand tool = left-hand toolholder + left-hand module
Ordering example, right-hand tool: NCAE16-1616R-GX09-1/ordering example, left-hand tool: NCAE16-1616L-GX09-1
Assembly parts
Module size E16 E20 E25 E32
Screw for grooving module FS1052 (Torx 15) FS1053 (Torx 15) FS1054 (Torx 20) FS1055 (Torx 25)
Handle key FS1047 (Torx 15) FS1047 (Torx 15) FS1048 (Torx 20) FS1049 (Torx 25)

Grooving
A2
Grooving module Toolholder

f1 l1 s1
mm mm mm Module size Type
18,9 98 1,3 E16 GX09-1E2 .. MSS-E16R/L07-GX09-1 MSS-E16R/L00-1616G
18,6 98 2 E16 GX09-2E3 .. MSS-E16R/L07-GX09-2 MSS-E16R/L00-1616G
23,9 123 1,3 E20 MSS-E20R/L12-GX16-1 MSS-E20R/L00-2020J
GX16-1E2 ..
30,8 153 1,3 E25 MSS-E25R/L12-GX16-1 MSS-E25R/L00-2525L
23,6 123 2 E20 MSS-E20R/L12-GX16-2 MSS-E20R/L00-2020J
30,4 153 2 E25 GX16-2E3 .. MSS-E25R/L12-GX16-2 MSS-E25R/L00-2525L
30,4 173 2 E32 MSS-E32R/L12-GX16-2 MSS-E32R/L00-3225N
23,1 123 3,0 E20 MSS-E20R/L12-GX16-3 MSS-E20R/L00-2020J
29,9 153 3,0 E25 GX16-3E .. MSS-E25R/L12-GX16-3 MSS-E25R/L00-2525L
29,9 173 3,0 E32 MSS-E32R/L12-GX16-3 MSS-E32R/L00-3225N
29,3 153 4,2 E25 GX16-4E6 .. MSS-E25R/L12-GX16-4 MSS-E25R/L00-2525L
23,6 132 2 E20 GX24-2E3 .. MSS-E20R/L21-GX24-2 MSS-E20R/L00-2020J

30,4 162 2 E25 GX24-2F3 .. MSS-E25R/L21-GX24-2 MSS-E25R/L00-2525L
29,9 162 3,0 E25 GX24-3E .. MSS-E25R/L21-GX24-3 MSS-E25R/L00-2525L
29,9 182 3,0 E32 GX24-3F .. MSS-E32R/L21-GX24-3 MSS-E32R/L00-3225N
29,3 162 4,2 E25 MSS-E25R/L21-GX24-4 MSS-E25R/L00-2525L
GX24-4E6 ..
29,3 182 4,2 E32 MSS-E32R/L21-GX24-4 MSS-E32R/L00-3225N
28,5 162 5,9 E25 GX24-5R .. MSS-E25R/L21-GX24-5 MSS-E25R/L00-2525L
A 278 D1 A 394 A 308 A 400

Grooving
Shank tool – 90° radial grooving

NCLE
Walter Cut
– Screw clamping
A2
NCLE20-2020R/L-GX16-1 12 63 20 20
D2 2–2,5
NCLE25-2525R/L-GX16-1 12 79 25 25
Tmax
NCLE20-2020R/L-GX16-2 12 63 20 20
h1 NCLE25-2525R/L-GX16-2 3 12 79 25 25
NCLE32-3225R/L-GX16-2 12 100 32 25
h b NCLE20-2020R/L-GX16-3 12 63 20 20
NCLE25-2525R/L-GX16-3 4–5 12 79 25 25
NCLE32-3225R/L-GX16-3 12 100 32 25
NCLE25-2525R/L-GX16-4 6 12 79 25 25
NCLE20-2020R/L-GX24-2-21 21 63 20 20
l21 3
l1 NCLE25-2525R/L-GX24-2-21 21 79 25 25
NCLE25-2525R/L-GX24-3-21 21 79 25 25
4–5
NCLE32-3225R/L-GX24-3-21 21 100 32 25
s NCLE25-2525R/L-GX24-4-21 21 79 25 25
6
s1 NCLE32-3225R/L-GX24-4-21 21 100 32 25
f
NCLE25-2525R/L-GX24-5-21 8 21 79 25 25
l1 = l21 + s/2
Right-hand tool = right-hand toolholder + left-hand module/left-hand tool = left-hand toolholder + right-hand module
Ordering example, right-hand tool: NCLE20-2020R-GX16-1/ordering example, left-hand tool: NCLE20-2020L-GX16-1
Assembly parts
Module size E20 E25 E32
Screw for grooving module FS1053 (Torx 15) FS1054 (Torx 20) FS1055 (Torx 25)
Handle key FS1047 (Torx 15) FS1048 (Torx 20) FS1049 (Torx 25)

Grooving
A2

f l21 s1
33 109,8 1,3 E20 MSS-E20R/L12-GX16-1 MSS-E20R/L90-2020J
GX16-1E2 ..
38 139,8 1,3 E25 MSS-E25R/L12-GX16-1 MSS-E25R/L90-2525L
33 109,3 2 E20 MSS-E20R/L12-GX16-2 MSS-E20R/L90-2020J
38 139,4 2 E25 GX16-2E3 .. MSS-E25R/L12-GX16-2 MSS-E25R/L90-2525L
45 159,4 2 E32 MSS-E32R/L12-GX16-2 MSS-E32R/L90-3225N
33 108,8 3,0 E20 MSS-E20R/L12-GX16-3 MSS-E20R/L90-2020J
38 138,9 3,0 E25 GX16-3E .. MSS-E25R/L12-GX16-3 MSS-E25R/L90-2525L
45 158,9 3,0 E32 MSS-E32R/L12-GX16-3 MSS-E32R/L90-3225N
38 138,3 4,2 E25 GX16-4E6 .. MSS-E25R/L12-GX16-4 MSS-E25R/L90-2525L
42 109,4 2 E20 GX24-2E3 .. MSS-E20R/L21-GX24-2 MSS-E20R/L90-2020J
47 139,4 2 E25 GX24-2F3 .. MSS-E25R/L21-GX24-2 MSS-E25R/L90-2525L
47 138,9 3,0 E25 GX24-3E .. MSS-E25R/L21-GX24-3 MSS-E25R/L90-2525L
54 158,9 3,0 E32 GX24-3F .. MSS-E32R/L21-GX24-3 MSS-E32R/L90-3225N
47 138,3 4,2 E25 MSS-E25R/L21-GX24-4 MSS-E25R/L90-2525L
GX24-4E6 ..
54 158,3 4,2 E32 MSS-E32R/L21-GX24-4 MSS-E32R/L90-3225N
47 137,5 5,9 E25 GX24-5R .. MSS-E25R/L21-GX24-5 MSS-E25R/L90-2525L
A 278 D1 A 394 A 308 A 400

Grooving

NCCE
Walter Cut
– Screw clamping
– Circlip grooves
A2
NCCE16-1616R/L-GX09-1 0,6–1,7 2 52 16 16
NCCE20-2020R/L-GX16-2 3 63 20 20
s1 NCCE25-2525R/L-GX16-2 0,6–2,3 3 79 25 25
NCCE32-3225R/L-GX16-2 3 100 32 25
h b
l1
Tmax
s
D2
h1 f1
f
f = f1 + s/2
Ordering example, right-hand tool: NCCE16-1616R-GX09-1/ordering example, left-hand tool: NCCE16-1616L-GX09-1
Assembly parts
Module size E16 E20 E25 E32

Grooving
A2

f1 l1 s1
18,9 98 1,3 E16 GX09-1S .. MSS-E16R/L02-GX09-1 MSS-E16R/L00-1616G
23,6 123 2 E20 MSS-E20R/L03-GX16-2 MSS-E20R/L00-2020J
30,4 153 2 E25 GX16-2S .. MSS-E25R/L03-GX16-2 MSS-E25R/L00-2525L
30,4 173 2 E32 MSS-E32R/L03-GX16-2 MSS-E32R/L00-3225N
A 281 D1 A 394 A 308 A 400

Grooving

NCNE
Walter Cut
– Screw clamping
– Circlip grooves
A2
NCNE20-2020R/L-GX16-2 3 63 20 20
D2
Tmax NCNE25-2525R/L-GX16-2 0,6–2,3 3 79 25 25
NCNE32-3225R/L-GX16-2 3 100 32 25
h1
h b
l21 l1
s
s1
f
l1 = l21 + s/2
Ordering example, right-hand tool: NCNE20-2020R-GX16-2/ordering example, left-hand tool: NCNE20-2020L-GX16-2
Assembly parts

Grooving
A2

f l21 s1
33 109,3 2 E20 MSS-E20R/L03-GX16-2 MSS-E20R/L90-2020J
38 139,4 2 E25 GX16-2S .. MSS-E25R/L03-GX16-2 MSS-E25R/L90-2525L
45 159,4 2 E32 MSS-E32R/L03-GX16-2 MSS-E32R/L90-3225N
A 281 D1 A 394 A 308 A 400

Grooving
A2

Grooving
Grooving module – Radial grooving

G1332
Walter Cut
– Replacement module
A2
Tool s Tmax Dmax h1 W l1 s1

Tmax G1332.IMR-GAD1.5N-GX16 1,5 15 32 24 4 41 1,3 GX16-0E1 ..
G1332.IMR-GAD2N-GX16 2 15 32 24 4 41 1,5 GX16-1E2 ..
Dmax
G1332.IMR-GAD3N-GX16 15 32 24 4 41 2,2 GX16-2E3 ..
h1
3 GX24-2E3 ..
G1332.IMR-GAD3N-GX24 15 32 24 4 52 2,2
l1 s1 GX24-2F3 ..
s w
Accessories
s [mm] 1,5–3
FS1494
insert
A 278 D1 A 394 A 308

Grooving

G2612
Walter Cut
A2
G2612-2020R/L-2T20SX 20 66 20 20
2
G2612-2525R/L-2T20SX 20 90 25 25
s1
G2612-2020R/L-3T20SX 20 66 20 20
G2612-2525R/L-3T25SX 25 90 25 25
h b 3
G2612-2525R/L-3T35SX 35 90 25 25
G2612-3225R/L-3T45SX 45 100 32 25
G2612-2020R/L-4T20SX 20 66 20 20
G2612-2525R/L-4T35SX 4 35 90 25 25
G2612-3225R/L-4T45SX 45 100 32 25
l1 G2612-2525R/L-5T35SX 35 90 25 25
5
G2612-3225R/L-5T45SX 45 100 32 25
G2612-2525R/L-6T35SX 35 90 25 25
Tmax 6
G2612-3225R/L-6T45SX 45 100 32 25
D2 G2612-3225R/L-8T45SX 8 45 100 32 25
s
h1 f1
f
Ordering example, right-hand tool: G2612-2020R-2T20SX/ordering example, left-hand tool: G2612-2020L-2T20SX
Assembly parts

Grooving
A2
SX

f1 l1 s1
23,8 132 1,6 E20 G2632-E20R/L-2T20SX MSS-E20R/L00-2020J
SX-2E2 ..
30,6 163 1,6 E25 G2632-E25R/L-2T20SX MSS-E25R/L00-2525L
SX-3E3 ..
30,2 208 2,4 E32 G2632-E32R/L-3T45SX MSS-E32R/L00-3225N
29,7 178 3,4 E25 SX-4E4 .. G2632-E25R/L-4T35SX MSS-E25R/L00-2525L
SX-5E5 ..
SX-6E6 ..
28,9 208 6,8 E32 SX-8E8 .. G2632-E32N-8T45SX MSS-E32R/L00-3225N
Accessories Module size E20 E25 E32 E32

s [mm] 2–4 2–6 3–6 8
FS1494 FS1494 FS1494 FS2274
insert
A 286 D1 A 394 A 308 A 400

Grooving

G2622
Walter Cut
A2
Tmax G2622-2020R/L-2T20SX 20 66 20 20
2
D2 G2622-2525R/L-2T20SX 20 90 25 25
h1 G2622-2020R/L-3T20SX 20 66 20 20
G2622-2525R/L-3T25SX 25 90 25 25
3
h b G2622-2525R/L-3T35SX 35 90 25 25
G2622-3225R/L-3T45SX 45 100 32 25
G2622-2020R/L-4T20SX 20 66 20 20
G2622-2525R/L-4T35SX 4 35 90 25 25
l21 l1 G2622-3225R/L-4T45SX 45 100 32 25

G2622-2525R/L-5T35SX 32 90 25 25
5
G2622-3225R/L-5T45SX 45 100 32 25
s G2622-2525R/L-6T35SX 35 90 25 25
s1 6
G2622-3225R/L-6T45SX 45 100 32 25
f
G2622-3225R/L-8T45SX 8 45 100 32 25
l1 = l21 + s/2
Ordering example, right-hand tool: G2622-2020R-2T20SX/ordering example, left-hand tool: G2622-2020L-2T20SX
Assembly parts

Grooving
A2
SX

f l21 s1
42 109,5 1,6 E20 G2632-E20R/L-2T20SX MSS-E20R/L90-2020J
SX-2E2 ..
48 139,6 1,6 E25 G2632-E25R/L-2T20SX MSS-E25R/L90-2525L
SX-3E3 ..
80 159,2 2,4 E32 G2632-E32R/L-3T45SX MSS-E32R/L90-3225N
63 138,8 3,4 E25 SX-4E4 .. G2632-E25R/L-4T35SX MSS-E25R/L90-2525L
SX-5E5 ..
SX-6E6 ..
80 163,8 6,8 E32 SX-8E8 .. G2632-E32N-8T45SX MSS-E32R/L90-3225N

s [mm] 2–4 2–6 3–6 8
FS1494 FS1494 FS1494 FS2274
insert
A 286 D1 A 394 A 308 A 400

Grooving

NCEE
Walter Cut
– Screw clamping
A2
Tool s Tmax Dmin Dmax h = h1

NCEE20-2020R/L-GX24-2-1 14 50 70 20
NCEE20-2020R/L-GX24-2-2 14 70 100 20
NCEE20-2020R/L-GX24-2-3 14 100 150 20
s1 3
NCEE25-2525R/L-GX24-2-1 15 50 70 25
h b NCEE25-2525R/L-GX24-2-2 15 70 100 25
NCEE25-2525R/L-GX24-2-3 15 100 150 25
NCEE25-2525R/L-GX24-3-1 15 50 70 25
NCEE25-2525R/L-GX24-3-2 15 70 100 25
NCEE32-3225R/L-GX24-3-2 15 70 100 32
NCEE25-2525R/L-GX24-3-3 4–5 15 100 150 25
l1
NCEE32-3225R/L-GX24-3-3 15 100 150 32
NCEE25-2525R/L-GX24-3-4 15 150 300 25
NCEE32-3225R/L-GX24-3-4 15 150 300 32
NCEE25-2525R/L-GX24-4-1 15 50 70 25
Tmax NCEE25-2525R/L-GX24-4-2 15 70 100 25
h1 s NCEE32-3225R/L-GX24-4-2 15 70 100 32
f1
Dmin f NCEE25-2525R/L-GX24-4-3 15 100 150 25
Dmax 6
NCEE32-3225R/L-GX24-4-3 15 100 150 32
NCEE25-2525R/L-GX24-4-4 15 150 300 25
NCEE32-3225R/L-GX24-4-4 15 150 300 32
NCEE32-3225R/L-GX24-4-5 15 300 900 32
f = f1 + s/2
Ordering example, right-hand tool: NCEE20-2020R-GX24-2-1/ordering example, left-hand tool: NCEE20-2020L-GX24-2-1
Assembly parts

Grooving
A2

b f1 l1 s1
mm mm mm mm Module size Type
20 23,6 132 2 E20 MSS-E20R/L14-GX24-2A5070 MSS-E20R/L00-2020J
20 23,6 132 2 E20 MSS-E20R/L14-GX24-2A70100 MSS-E20R/L00-2020J
20 23,6 132 2 E20 GX24-2E3 .. MSS-E20R/L14-GX24-2A100150 MSS-E20R/L00-2020J
25 30,4 162 2 E25 GX24-2F3 .. MSS-E25R/L15-GX24-2A5070 MSS-E25R/L00-2525L
25 30,4 162 2 E25 MSS-E25R/L15-GX24-2A70100 MSS-E25R/L00-2525L
25 29,9 182 3 E32 MSS-E32R/L15-GX24-3A70100 MSS-E32R/L00-3225N
GX24-3E ..
GX24-3F ..
25 29,3 162 4,2 E25 MSS-E25R/L15-GX24-4A5070 MSS-E25R/L00-2525L
25 29,3 182 4,2 E32 MSS-E32R/L15-GX24-4A70100 MSS-E32R/L00-3225N
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving
Shank tool – 90° axial grooving

NCHE
Walter Cut
– Screw clamping
A2

NCHE20-2020R/L-GX24-2-1 14 50 70 20
h1 NCHE20-2020R/L-GX24-2-2 14 70 100 20
NCHE20-2020R/L-GX24-2-3 14 100 150 20
h b 3
NCHE25-2525R/L-GX24-2-1 15 50 70 25
NCHE25-2525R/L-GX24-2-2 15 70 100 25
NCHE25-2525R/L-GX24-2-3 15 100 150 25
NCHE25-2525R/L-GX24-3-1 15 50 70 25
l21 NCHE25-2525R/L-GX24-3-2 15 70 100 25
l1
NCHE32-3225R/L-GX24-3-2 15 70 100 32
NCHE25-2525R/L-GX24-3-3 4–5 15 100 150 25
Tmax NCHE32-3225R/L-GX24-3-3 15 100 150 32
s1 s
NCHE25-2525R/L-GX24-3-4 15 150 300 25
NCHE32-3225R/L-GX24-3-4 15 150 300 32
f
NCHE25-2525R/L-GX24-4-1 15 50 70 25
Dmin
Dmax
NCHE25-2525R/L-GX24-4-2 15 70 100 25
NCHE32-3225R/L-GX24-4-2 15 70 100 32
NCHE25-2525R/L-GX24-4-3 15 100 150 25
6
NCHE32-3225R/L-GX24-4-3 15 100 150 32
NCHE25-2525R/L-GX24-4-4 15 150 300 25
NCHE32-3225R/L-GX24-4-4 15 150 300 32
NCHE32-3225R/L-GX24-4-5 15 300 900 32
l1 = l21 + s/2
Ordering example, right-hand tool: NCHE20-2020R-GX24-2-1/ordering example, left-hand tool: NCHE20-2020L-GX24-2-1
Assembly parts

Grooving
A2

b f l21 s1
20 42 109,4 2 E20 MSS-E20R/L14-GX24-2A5070 MSS-E20R/L90-2020J
20 42 109,4 2 E20 MSS-E20R/L14-GX24-2A70100 MSS-E20R/L90-2020J
20 42 109,4 2 E20 GX24-2E3 .. MSS-E20R/L14-GX24-2A100150 MSS-E20R/L90-2020J
25 47 139,4 2 E25 GX24-2F3 .. MSS-E25R/L15-GX24-2A5070 MSS-E25R/L90-2525L
25 47 139,4 2 E25 MSS-E25R/L15-GX24-2A70100 MSS-E25R/L90-2525L
25 47 139,4 2 E25 MSS-E25R/L15-GX24-2A100150 MSS-E25R/L90-2525L
25 47 138,9 3,0 E25 MSS-E25R/L15-GX24-3A5070 MSS-E25R/L90-2525L
25 54 158,9 3,0 E32 MSS-E32R/L15-GX24-3A70100 MSS-E32R/L90-3225N
GX24-3E ..
GX24-3F ..
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving

NCFE
Walter Cut
– Screw clamping
A2

NCFE25-2525R/L-GX24-3-1 21 50 70 25
NCFE25-2525R/L-GX24-3-2 21 70 100 25
4–5
NCFE25-2525R/L-GX24-3-3 21 100 150 25
s1
NCFE25-2525R/L-GX24-3-4 21 150 300 25
h b
NCFE25-2525R/L-GX24-4-1 25 50 70 25
NCFE25-2525R/L-GX24-4-2 25 70 100 25
6
NCFE25-2525R/L-GX24-4-3 25 100 150 25
NCFE25-2525R/L-GX24-4-4 25 150 300 25
l1
Tmax
h1 s
f1
Dmin f
Dmax
f = f1 + s/2
Ordering example, right-hand tool: NCFE25-2525R-GX24-3-1/ordering example, left-hand tool: NCFE25-2525L-GX24-3-1
Assembly parts
Module size E25
Screw for grooving module FS1054 (Torx 20)
Handle key for module FS1048 (Torx 20)

Grooving
A2

b f1 l1 s1
25 29,9 175 3 E25 MSS-E25R/L21-GX24-3C5070 MSS-E25R/L00-2525L
25 29,9 175 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 MSS-E25R/L00-2525L
25 29,9 175 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 MSS-E25R/L00-2525L
25 29,3 175 4,2 E25 MSS-E25R/L25-GX24-4C5070 MSS-E25R/L00-2525L
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving
Shank tool – Axial/contra

NCFE...C
Walter Cut
– Screw clamping
– Contra design
A2

NCFE25-2525R/L-GX24-3-1C 21 50 70 25
NCFE25-2525R/L-GX24-3-2C 21 70 100 25
4–5
s1
NCFE25-2525R/L-GX24-3-3C 21 100 150 25
h b NCFE25-2525R/L-GX24-3-4C 21 150 300 25
NCFE25-2525R/L-GX24-4-1C 25 50 70 25
NCFE25-2525R/L-GX24-4-2C 25 70 100 25
6
NCFE25-2525R/L-GX24-4-3C 25 100 150 25
NCFE25-2525R/L-GX24-4-4C 25 150 300 25
l1
Tmax
h1 s
f1
Dmin f
Dmax
f = f1 + s/2
Ordering example, right-hand tool: NCFE25-2525R-GX24-3-1C/ordering example, left-hand tool: NCFE25-2525L-GX24-3-1C
Assembly parts
Module size E25

Grooving
A2

b f1 l1 s1
25 27,2 175 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 MSS-E25R/L00-2525L
25 27,2 175 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 MSS-E25R/L00-2525L
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving
Shank tool – 90° axial grooving

NCOE
Walter Cut
– Screw clamping
A2

NCOE25-2525R/L-GX24-3-1 21 50 70 25
h1 NCOE25-2525R/L-GX24-3-2 21 70 100 25
4–5
NCOE25-2525R/L-GX24-3-3 21 100 150 25
h b
NCOE25-2525R/L-GX24-3-4 21 150 300 25
NCOE25-2525R/L-GX24-4-1 25 50 70 25
NCOE25-2525R/L-GX24-4-2 25 70 100 25
6
NCOE25-2525R/L-GX24-4-3 25 100 150 25
l21
NCOE25-2525R/L-GX24-4-4 25 150 300 25
l1
Tmax
s1 s
Dmin
Dmax
l1 = l21 + s/2
Ordering example, right-hand tool: NCOE25-2525R-GX24-3-1/ordering example, left-hand tool: NCOE25-2525L-GX24-3-1
Assembly parts
Module size E25

Grooving
A2

b f l21 s1
25 60 138,9 3 E25 MSS-E25R/L21-GX24-3C5070 MSS-E25R/L90-2525L
25 60 138,9 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 MSS-E25R/L90-2525L
25 60 138,9 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 MSS-E25R/L90-2525L
25 60 138,3 4,2 E25 MSS-E25R/L25-GX24-4C5070 MSS-E25R/L90-2525L
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving
Shank tool – 90° axial/contra

NCOE...C
Walter Cut
– Screw clamping
– Contra design
A2

NCOE25-2525R/L-GX24-3-1C 21 50 70 25
h1 NCOE25-2525R/L-GX24-3-2C 21 70 100 25
4–5
NCOE25-2525R/L-GX24-3-3C 21 100 150 25
h b
NCOE25-2525R/L-GX24-3-4C 21 150 300 25
NCOE25-2525R/L-GX24-4-1C 25 50 70 25
NCOE25-2525R/L-GX24-4-2C 25 70 100 25
6
NCOE25-2525R/L-GX24-4-3C 25 100 150 25
l21 l1 NCOE25-2525R/L-GX24-4-4C 25 150 300 25
Tmax
s1 s
f
Dmin
Dmax
l1 = l21 + s/2
Ordering example, right-hand tool: NCOE25-2525R-GX24-3-1C/ordering example, left-hand tool: NCOE25-2525L-GX24-3-1C
Assembly parts
Module size E25

Grooving
A2

b f l21 s1
25 60 136,2 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 MSS-E25R/L90-2525L
25 60 136,2 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 MSS-E25R/L90-2525L
GX24-4E6 ..
A 278 D1 A 394 A 308 A 400

Grooving

NCAI
Walter Cut
– Screw clamping
A2
Tool s Tmax Dmin d1 d4 f

Designation mm mm mm mm mm mm
1.5 × D NCAI16-2015R/L-GX09-1 4 20 20 25 11
NCAI20-2015R/L-GX09-1 5 25 20 25 13
d1 NCAI25-2515R/L-GX09-1 2–2,5 6 32 25 32 17
f
NCAI32-3215R/L-GX16-1 9 40 32 40 22
s1
s NCAI40-4015R/L-GX16-1 10 50 40 50 27
l16 l5
l21 NCAI16-2015R/L-GX09-2 4 20 20 25 11
l4 NCAI20-2015R/L-GX09-2 5 25 20 25 13
NCAI25-2515R/L-GX09-2 3 6 32 25 32 17
Dmin NCAI32-3215R/L-GX16-2 9 40 32 40 22
Tmax
NCAI40-4015R/L-GX16-2 10 50 40 50 27
NCAI32-3215R/L-GX16-3 9 40 32 40 22
NCAI40-4015R/L-GX16-3 4–5 10 50 40 50 27
NCAI40-4015R/L-GX24-3 19 60 40 50 36
NCAI32-3215R/L-GX16-4 9 40 32 40 22
NCAI40-4015R/L-GX16-4 6 10 50 40 50 27
NCAI40-4015R/L-GX24-4 19 60 40 50 36
2.5 × D NCAI16-2025R/L-GX09-1 4 20 20 14,5
NCAI20-2525R/L-GX09-1 5 25 25 18
d1 NCAI25-3225R/L-GX09-1 2–2,5 6 32 32 22,5
f
NCAI32-4025R/L-GX16-1 9 40 40 29,5
s1
s NCAI40-5025R/L-GX16-1 10 50 50 35,5
l4
l21 NCAI16-2025R/L-GX09-2 4 20 20 14,5
l1
NCAI20-2525R/L-GX09-2 5 25 25 18
NCAI25-3225R/L-GX09-2 3 6 32 32 22,5
Dmin
NCAI32-4025R/L-GX16-2 9 40 40 29,5
Tmax
NCAI40-5025R/L-GX16-2 10 50 50 35,5
NCAI32-4025R/L-GX16-3 9 40 40 29,5
NCAI40-5025R/L-GX16-3 4–5 10 50 50 35,5
NCAI40-5025R/L-GX24-3 19 60 50 44,5
NCAI32-4025R/L-GX16-4 9 40 40 29,5
NCAI40-5025R/L-GX16-4 6 10 50 50 35,5
NCAI40-5025R/L-GX24-4 19 60 50 44,5
1.5 × D: l4 = l21 + s/2
2.5 × D: l1 = l21 + s/2
Ordering example, right-hand tool: NCAI16-2015R-GX09-1/ordering example, left-hand tool: NCAI16-2015L-GX09-1
Assembly parts
Module size I16 I20 I25 I32 I40
Screw for grooving module FS1051 (Torx 8) FS1056 (Torx 10) FS1052 (Torx 15) FS1057 (Torx 20) FS1054 (Torx 20)
Handle key FS257 (Torx 8) FS1050 (Torx 10) FS1047 (Torx 15) FS1048 (Torx 20) FS1048 (Torx 20)

Grooving
A2

l5 l4 l21 l16 s1 Module
mm mm mm mm mm size Type
50 31,4 31,4 1,3 I16 MSS-I16R/L04-GX09-1 MSS-I16R/L90-1,5D-N
50 36,4 36,4 1,3 I20 GX09-1E2 .. MSS-I20R/L05-GX09-1 MSS-I20R/L90-1,5D-N
GX16-1E2 ..
50 31,4 31,4 2 I16 MSS-I16R/L04-GX09-2 MSS-I16R/L90-1,5D-N
50 36,4 36,4 2 I20 GX09-2E3 .. MSS-I20R/L05-GX09-2 MSS-I20R/L90-1,5D-N
56 45,4 45,4 2 I25 MSS-I25R/L06-GX09-2 MSS-I25R/L90-1,5D-N
60 58 58 2 I32 MSS-I32R/L09-GX16-2 MSS-I32R/L90-1,5D-N
GX16-2E3 ..
GX16-3E ..
GX24-3E ..
70 70,8 70,5 3,0 I40 MSS-I40N19-GX24-3 MSS-I40R/L90-1,5D-N
GX24-3F ..
GX16-4E6 ..
70 70,2 69,9 4,2 I40 GX24-4E6 .. MSS-I40N19-GX24-4 MSS-I40R/L90-1,5D-N
39,4 179,3 1,3 I16 MSS-I16R/L04-GX09-1 MSS-I16R/L90-2,5D-N
49,4 199,3 1,3 I20 GX09-1E2 .. MSS-I20R/L05-GX09-1 MSS-I20R/L90-2,5D-N
GX16-1E2 ..
39 179 2 I16 MSS-I16R/L04-GX09-2 MSS-I16R/L90-2,5D-N
49 199 2 I20 GX09-2E3 .. MSS-I20R/L05-GX09-2 MSS-I20R/L90-2,5D-N
GX16-2E3 ..
GX16-3E ..
GX24-3E ..
100 348,8 3,0 I40 MSS-I40N19-GX24-3 MSS-I40R/L90-2,5D-N
GX24-3F ..
GX16-4E6 ..
100 348,2 4,2 I40 GX24-4E6 .. MSS-I40N19-GX24-4 MSS-I40R/L90-2,5D-N
A 278 D1 A 394 A 308 A 400

Grooving

NCCI
Walter Cut
– Screw clamping
– Circlip grooves
A2
Tool s Tmax Dmin d1 d4 f

1.5 × D NCCI16-2015R/L-GX09-1 2 20 20 25 11
NCCI20-2015R/L-GX09-1 0,6–1,7 2 25 20 25 13
d1 NCCI25-2515R/L-GX09-1 2 32 25 32 17
f
NCCI32-3215R/L-GX16-2 3 40 32 40 22
s1 0,6–2,3
s NCCI40-4015R/L-GX16-2 3 50 40 50 27
l16 l5
l21
l4
Dmin
Tmax
2.5 × D NCCI16-2025R/L-GX09-1 2 20 20 14,5

NCCI20-2525R/L-GX09-1 0,6–1,7 2 25 25 18
d1 NCCI25-3225R/L-GX09-1 2 32 32 22,5
f
NCCI32-4025R/L-GX16-2 3 40 40 29,5
s1 0,6–2,3
s NCCI40-5025R/L-GX16-2 3 50 50 35,5
l4
l21
l1
Dmin
Tmax
1.5 × D: l4 = l21 + s/2

2.5 × D: l1 = l21 + s/2
Ordering example, right-hand tool: NCCI16-2015R-GX09-1/ordering example, left-hand tool: NCCI16-2015L-GX09-1
Assembly parts
Module size I16 I20 I25 I32 I40

Grooving
A2

l5 l4 l21 l16 s1 Module
mm mm mm mm mm size Type
50 36,4 36,4 1,3 I20 GX09-1S .. MSS-I20R/L02-GX09-1 MSS-I20R/L90-1,5D-N
GX16-2S ..

49,4 199,3 1,3 I20 GX09-1S .. MSS-I20R/L02-GX09-1 MSS-I20R/L90-2,5D-N
GX16-2S ..
A 281 D1 A 394 A 308 A 400

Grooving
Groove turning holders – Radial grooving

C...-NCAE
Walter Cut
– Walter Capto™
– Screw clamping
A2
Tool s Tmax D2
Designation mm mm mm d1
Walter Capto™ in accordance with ISO 26623 NCAE16-C300R/L-GX09-1 2–2,5 7 52 C3
NCAE16-C300R/L-GX09-2 3 7 52 C3
NCAE20-C300R/L-GX16-1 12 63 C3
NCAE25-C400R/L-GX16-1 2–2,5 12 79 C4
NCAE25-C500R/L-GX16-1 12 79 C5
s1
NCAE20-C300R/L-GX16-2 12 63 C3
d1
NCAE25-C400R/L-GX16-2 12 79 C4
3
NCAE25-C500R/L-GX16-2 12 79 C5
NCAE32-C600R/L-GX16-2 12 100 C6
NCAE20-C300R/L-GX16-3 12 63 C3
l4
NCAE25-C400R/L-GX16-3 12 79 C4
4–5
Tmax NCAE25-C500R/L-GX16-3 12 79 C5
D2
s NCAE32-C600R/L-GX16-3 12 100 C6
f1
f
NCAE25-C400R/L-GX16-4 12 79 C4
6
NCAE25-C500R/L-GX16-4 12 79 C5
f = f1 + s/2
For Tmax with diameters greater than D2, see “Technical information − Grooving”
Ordering example, right-hand tool: NCAE16-C300R-GX09-1/ordering example, left-hand tool: NCAE16-C300L-GX09-1
Assembly parts Module size E16 E20 E25 E25 E32

d1 C3 C3 C4 C5 C6

Grooving
A2

f1 l4 s1
19,8 41 1,3 E16 GX09-1E2 .. MSS-E16R/L07-GX09-1 C3-MSS-E16R/L00
19,4 41 2 E16 GX09-2E3 .. MSS-E16R/L07-GX09-2 C3-MSS-E16R/L00
19,8 50 1,3 E20 MSS-E20R/L12-GX16-1 C3-MSS-E20R/L00
19,4 50 2 E20 MSS-E20R/L12-GX16-2 C3-MSS-E20R/L00
GX16-2E3 ..
GX16-3E ..
GX16-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving

C...-NCBE
Walter Cut
– Walter Capto™
– Screw clamping
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 NCBE20-C300R/L-GX24-2-21 21 63 C3
NCBE25-C400R/L-GX24-2-21 3 21 79 C4
NCBE25-C500R/L-GX24-2-21 21 79 C5
NCBE25-C400R/L-GX24-3-21 21 79 C4
NCBE25-C500R/L-GX24-3-21 4–5 21 79 C5
s1
NCBE32-C600R/L-GX24-3-21 21 100 C6
d1
NCBE25-C400R/L-GX24-4-21 21 79 C4
NCBE25-C500R/L-GX24-4-21 6 21 79 C5
NCBE32-C600R/L-GX24-4-21 21 100 C6
NCBE25-C400R/L-GX24-5-21 21 79 C4
l4 8
NCBE25-C500R/L-GX24-5-21 21 79 C5
Tmax
s
D2
f1
f
f = f1 + s/2
Ordering example, right-hand tool: NCBE20-C300R-GX24-2-21/ordering example, left-hand tool: NCBE20-C300L-GX24-2-21
Assembly parts Module size E20 E25 E25 E32

d1 C3 C4 C5 C6

Grooving
A2

f1 l4 s1
GX24-2E3 ..
GX24-2F3 ..
GX24-3E ..
GX24-3F ..
GX24-5R4 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – 90° radial grooving

C...-NCLE
Walter Cut
– Walter Capto™
– Screw clamping
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 NCLE20-C300R/L-GX16-1 12 63 C3
NCLE25-C400R/L-GX16-1 2–2,5 12 79 C4
D2 NCLE25-C500R/L-GX16-1 12 79 C5
Tmax
NCLE20-C300R/L-GX16-2 12 63 C3
NCLE25-C400R/L-GX16-2 12 79 C4
3
NCLE25-C500R/L-GX16-2 12 79 C5
NCLE32-C600R/L-GX16-2 12 100 C6
d1
NCLE20-C300R/L-GX16-3 12 63 C3
NCLE25-C400R/L-GX16-3 12 79 C4
4–5
NCLE25-C500R/L-GX16-3 12 79 C5
l21 NCLE32-C600R/L-GX16-3 12 100 C6
l4
s
NCLE25-C400R/L-GX16-4 12 79 C4
6
s1 NCLE25-C500R/L-GX16-4 12 79 C5
f
NCLE20-C300R/L-GX24-2-21 21 63 C3
NCLE25-C400R/L-GX24-2-21 3 21 79 C4
NCLE25-C500R/L-GX24-2-21 21 79 C5
NCLE25-C400R/L-GX24-3-21 21 79 C4
NCLE25-C500R/L-GX24-3-21 4–5 21 79 C5
NCLE32-C600R/L-GX24-3-21 21 100 C6
NCLE25-C400R/L-GX24-4-21 21 79 C4
NCLE25-C500R/L-GX24-4-21 6 21 79 C5
NCLE32-C600R/L-GX24-4-21 21 100 C6
NCLE25-C400R/L-GX24-5-21 21 79 C4
8
NCLE25-C500R/L-GX24-5-21 21 79 C5
l4 = l21 + s/2
Ordering example, right-hand tool: NCLE20-C300R-GX16-1/ordering example, left-hand tool: NCLE20-C300L-GX16-1
Assembly parts

Grooving
A2

f l21 s1
33 35,8 1,3 E20 MSS-E20R/L12-GX16-1 C3-MSS-E20R/L90
33 53,8 1,3 E25 GX16-1E2 .. MSS-E25R/L12-GX16-1 C4-MSS-E25R/L90
33 35,4 2 E20 MSS-E20R/L12-GX16-2 C3-MSS-E20R/L90
GX16-2E3 ..
GX16-3E ..
GX16-4E6 ..
GX24-2E3 ..
GX24-2F3 ..
GX24-3E ..
GX24-3F ..
47 52,3 4,2 E25 GX24-4E6 .. MSS-E25R/L21-GX24-4 C5-MSS-E25R/L90
GX24-5R4 ..
A 278 D1 A 394 A 402 A 400

Grooving

C...-NCCE
Walter Cut
– Walter Capto™
– Screw clamping/circlip grooves
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 NCCE16-C300R/L-GX09-1 0,6–1,7 2 52 C3
NCCE20-C300R/L-GX16-2 3 52 C3
NCCE25-C400R/L-GX16-2 3 63 C4
0,6–2,3
NCCE25-C500R/L-GX16-2 3 79 C5
NCCE32-C600R/L-GX16-2 3 100 C6
s1
d1
l4
Tmax
s
D2 f1
f
f = f1 + s/2
Ordering example, right-hand tool: NCCE16-C300R-GX09-1/ordering example, left-hand tool: NCCE16-C300L-GX09-1
Assembly parts Module size E16 E20 E25 E25 E32

d1 C3 C3 C4 C5 C6

Grooving
A2

f1 l4 s1
19,8 41 1,3 E16 GX09-1S .. MSS-E16R/L02-GX09-1 C3-MSS-E16R/L00
GX16-2S ..
A 281 D1 A 394 A 402 A 400

Grooving

C...-NCNE
Walter Cut
– Walter Capto™
– Screw clamping/circlip grooves
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 NCNE20-C300R/L-GX16-2 3 63 C3
NCNE25-C400R/L-GX16-2 3 79 C4
0,6–2,3
D2 NCNE25-C500R/L-GX16-2 3 79 C5
Tmax
NCNE32-C600R/L-GX16-2 3 100 C6
d1
l21
l4
s
s1
f
l4 = l21 + s/2
Ordering example, right-hand tool: NCNE20-C300R-GX16-2/ordering example, left-hand tool: NCNE20-C300L-GX16-2
Assembly parts

Grooving
A2

f l21 s1
GX16-2S ..
A 281 D1 A 394 A 402 A 400

Grooving

C...-G2612
Walter Cut
– Walter Capto™
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 G2612-C3R/L-2T20SX 20 66 C3
G2612-C4R/L-2T20SX 2 20 90 C4
G2612-C5R/L-2T20SX 20 90 C5
G2612-C3R/L-3T20SX 20 66 C3
G2612-C4R/L-3T25SX 25 90 C4
s1
G2612-C5R/L-3T25SX 25 90 C5
d1
G2612-C4R/L-3T35SX 3 35 90 C4
G2612-C5R/L-3T35SX 35 90 C5
G2612-C6R/L-3T35SX 35 100 C6
G2612-C6R/L-3T45SX 45 100 C6
l4
Tmax G2612-C3R/L-4T20SX 20 66 C3
G2612-C4R/L-4T35SX 35 90 C4
G2612-C5R/L-4T35SX 4 35 90 C5
D2
G2612-C6R/L-4T35SX 35 100 C6
s
f1 G2612-C6R/L-4T45SX 45 100 C6
f G2612-C4R/L-5T35SX 35 90 C4
G2612-C5R/L-5T35SX 35 100 C5
5
G2612-C6R/L-5T35SX 35 100 C6
G2612-C6R/L-5T45SX 45 100 C6
G2612-C4R/L-6T35SX 35 90 C4
G2612-C5R/L-6T35SX 35 100 C5
6
G2612-C6R/L-6T35SX 35 100 C6
G2612-C6R/L-6T45SX 45 100 C6
G2612-C6R/L-8T45SX 8 45 100 C6
f = f1 + s/2
Ordering example, right-hand tool: G2612-C3R-2T20SX/ordering example, left-hand tool: G2612-C3L-2T20SX

d1 C3 C4 C5/C6 C6

Grooving
A2
SX

f1 l4 s1
19,6 59 1,6 E20 G2632-E20R/L-2T20SX C3-MSS-E20R/L00
25,6 71 1,6 E25 SX-2E2 .. G2632-E25R/L-2T20SX C4-MSS-E25R/L00
SX-5E5 ..
SX-6E6 ..
34,9 102 6,8 E32 SX-8E8 .. G2632-E32N-8T45SX C6-MSS-E32R/L00

s [mm] 2–4 2–6 3–6 8
Mounting wrench
FS1494 FS1494 FS1494 FS2274
for grooving insert
A 286 D1 A 394 A 402 A 400

Grooving

C...-G2622
Walter Cut
– Walter Capto™
A2
Tool s Tmax D2
Walter Capto™ in accordance with ISO 26623 G2622-C3R/L-2T20SX 20 66 C3
Tmax G2622-C4R/L-2T20SX 2 20 90 C4
G2622-C5R/L-2T20SX 20 90 C5
D2
G2622-C3R/L-3T20SX 20 66 C3
G2622-C4R/L-3T25SX 25 90 C4
G2622-C5R/L-3T25SX 25 90 C5
d1 3
G2622-C4R/L-3T35SX 35 90 C4
G2622-C5R/L-3T35SX 35 90 C5
G2622-C6R/L-3T45SX 45 100 C6
l21
l4 G2622-C3R/L-4T20SX 20 66 C3
s G2622-C4R/L-4T35SX 35 90 C4
s1 4
f
G2622-C5R/L-4T35SX 35 90 C5
G2622-C6R/L-4T45SX 45 100 C6
G2622-C4R/L-5T35SX 35 90 C4
G2622-C5R/L-5T35SX 5 35 90 C5
G2622-C6R/L-5T45SX 45 100 C6
G2622-C4R/L-6T35SX 35 90 C4
G2622-C5R/L-6T35SX 6 35 90 C5
G2622-C6R/L-6T45SX 45 100 C6
G2622-C6R/L-8T45SX 8 45 100 C6
l4 = l21 + s/2
Ordering example, right-hand tool: G2622-C3R-2T20SX/ordering example, left-hand tool: G2622-C3L-2T20SX

d1 C3 C4 C5 C6

Grooving
A2
SX

f l21 s1
42 35,6 1,6 E20 G2632-E20R/L-2T20SX C3-MSS-E20R/L90
42 53,6 1,6 E25 SX-2E2 .. G2632-E25R/L-2T20SX C4-MSS-E25R/L90
SX-3E3 ..
SX-4E4 ..
80 60,4 6,8 E32 SX-8E8 .. G2632-E32N-8T45SX C6-MSS-E32R/L90

s [mm] 2–4 2–6 3–6 8
Mounting wrench
FS1494 FS1494 FS1494 FS2274
for grooving insert
A 286 D1 A 394 A 402 A 400

Grooving
Groove turning holders – Axial grooving

C...-NCEE
Walter Cut
– Walter Capto™
– Screw clamping
A2
Tool s Tmax Dmin Dmax

Designation mm mm mm mm d1
Walter Capto™ in accordance with ISO 26623 NCEE20-C300R/L-GX24-2-1 14 50 70 C3
NCEE20-C300R/L-GX24-2-2 14 70 100 C3
NCEE20-C300R/L-GX24-2-3 14 100 150 C3
NCEE25-C400R/L-GX24-2-1 15 50 70 C4
NCEE25-C500R/L-GX24-2-1 3 15 50 70 C5
s1
NCEE25-C400R/L-GX24-2-2 15 70 100 C4
d1
NCEE25-C500R/L-GX24-2-2 15 70 100 C5
NCEE25-C400R/L-GX24-2-3 15 100 150 C4
NCEE25-C500R/L-GX24-2-3 15 100 150 C5
NCEE25-C400R/L-GX24-3-1 15 50 70 C4
NCEE25-C500R/L-GX24-3-1 15 50 70 C5
l4
NCEE25-C400R/L-GX24-3-2 15 70 100 C4
Tmax NCEE25-C500R/L-GX24-3-2 15 70 100 C5
s NCEE32-C600R/L-GX24-3-2 15 70 100 C6
f1
f NCEE25-C400R/L-GX24-3-3 4–5 15 100 150 C4
Dmin NCEE25-C500R/L-GX24-3-3 15 100 150 C5
Dmax
NCEE32-C600R/L-GX24-3-3 15 100 150 C6
NCEE25-C400R/L-GX24-3-4 15 150 300 C4
NCEE25-C500R/L-GX24-3-4 15 150 300 C5
NCEE32-C600R/L-GX24-3-4 15 150 300 C6
NCEE25-C400R/L-GX24-4-1 15 50 70 C4
NCEE25-C500R/L-GX24-4-1 15 50 70 C5
NCEE25-C400R/L-GX24-4-2 15 70 100 C4
NCEE25-C500R/L-GX24-4-2 15 70 100 C5
NCEE32-C600R/L-GX24-4-2 15 70 100 C6
NCEE25-C400R/L-GX24-4-3 15 100 150 C4
6
NCEE25-C500R/L-GX24-4-3 15 100 150 C5
NCEE32-C600R/L-GX24-4-3 15 100 150 C6
NCEE25-C400R/L-GX24-4-4 15 150 300 C4
NCEE25-C500R/L-GX24-4-4 15 150 300 C5
NCEE32-C600R/L-GX24-4-4 15 150 300 C6
NCEE32-C600R/L-GX24-4-5 15 300 900 C6
f = f1 + s/2
Ordering example, right-hand tool: NCEE20-C300R-GX24-2-1/ordering example, left-hand tool: NCEE20-C300L-GX24-2-1

d1 C3 C4 C5 C6

Grooving
A2

f1 l4 s1
19,4 59 2 E20 MSS-E20R/L14-GX24-2A5070 C3-MSS-E20R/L00
GX24-2E3 ..
GX24-2F3 ..
GX24-3E ..
GX24-3F ..
26,4 70 4,2 E25 MSS-E25R/L15-GX24-4A5070 C4-MSS-E25R/L00
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – 90° axial grooving

C...-NCHE
Walter Cut
– Walter Capto™
– Screw clamping
A2

Walter Capto™ in accordance with ISO 26623 NCHE20-C300R/L-GX24-2-1 14 50 70 C3
NCHE20-C300R/L-GX24-2-2 14 70 100 C3
NCHE20-C300R/L-GX24-2-3 14 100 150 C3
NCHE25-C400R/L-GX24-2-1 15 50 70 C4
NCHE25-C500R/L-GX24-2-1 3 15 50 70 C5
NCHE25-C400R/L-GX24-2-2 15 70 100 C4
d1
NCHE25-C500R/L-GX24-2-2 15 70 100 C5
NCHE25-C400R/L-GX24-2-3 15 100 150 C4
NCHE25-C500R/L-GX24-2-3 15 100 150 C5
NCHE25-C400R/L-GX24-3-1 15 50 70 C4
l21
s1
l4 NCHE25-C500R/L-GX24-3-1 15 50 70 C5
Tmax s
NCHE25-C400R/L-GX24-3-2 15 70 100 C4
f NCHE25-C500R/L-GX24-3-2 15 70 100 C5
Dmin
Dmax NCHE32-C600R/L-GX24-3-2 15 70 100 C6
NCHE25-C400R/L-GX24-3-3 4–5 15 100 150 C4
NCHE25-C500R/L-GX24-3-3 15 100 150 C5
NCHE32-C600R/L-GX24-3-3 15 100 150 C6
NCHE25-C400R/L-GX24-3-4 15 150 300 C4
NCHE25-C500R/L-GX24-3-4 15 150 300 C5
NCHE32-C600R/L-GX24-3-4 15 150 300 C6
NCHE25-C400R/L-GX24-4-1 15 50 70 C4
NCHE25-C500R/L-GX24-4-1 15 50 70 C5
NCHE25-C400R/L-GX24-4-2 15 70 100 C4
NCHE25-C500R/L-GX24-4-2 15 70 100 C5
NCHE32-C600R/L-GX24-4-2 15 70 100 C6
NCHE25-C400R/L-GX24-4-3 15 100 150 C4
6
NCHE25-C500R/L-GX24-4-3 15 100 150 C5
NCHE32-C600R/L-GX24-4-3 15 100 150 C6
NCHE25-C400R/L-GX24-4-4 15 150 300 C4
NCHE25-C500R/L-GX24-4-4 15 150 300 C5
NCHE32-C600R/L-GX24-4-4 15 150 300 C6
NCHE32-C600R/L-GX24-4-5 15 300 900 C6
l4 = l21 + s/2
Ordering example, right-hand tool: NCHE20-C300R-GX24-2-1/ordering example, left-hand tool: NCHE20-C300L-GX24-2-1
Assembly parts

Grooving
A2

f l21 s1
42 35,4 2 E20 MSS-E20R/L14-GX24-2A5070 C3-MSS-E20R/L90
GX24-2E3 ..
GX24-2F3 ..
42 52,9 3,0 E25 MSS-E25R/L15-GX24-3A5070 C4-MSS-E25R/L90
GX24-3E ..
GX24-3F ..
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – Axial grooving

C...-NCFE
Walter Cut
– Walter Capto™
– Screw clamping
A2

Walter Capto™ in accordance with ISO 26623 NCFE25-C400R/L-GX24-3-1 21 50 70 C4
NCFE25-C500R/L-GX24-3-1 21 50 70 C5
NCFE25-C400R/L-GX24-3-2 21 70 100 C4
NCFE25-C500R/L-GX24-3-2 21 70 100 C5
4–5
NCFE25-C400R/L-GX24-3-3 21 100 150 C4
s1
d1 NCFE25-C500R/L-GX24-3-3 21 100 150 C5
NCFE25-C400R/L-GX24-3-4 21 150 300 C4
NCFE25-C500R/L-GX24-3-4 21 150 300 C5
NCFE25-C400R/L-GX24-4-1 25 50 70 C4
NCFE25-C500R/L-GX24-4-1 25 50 70 C5
l4 NCFE25-C400R/L-GX24-4-2 25 70 100 C4
NCFE25-C500R/L-GX24-4-2 25 70 100 C5
6
Tmax NCFE25-C400R/L-GX24-4-3 25 100 150 C4
s NCFE25-C500R/L-GX24-4-3 25 100 150 C5
Dmin f1
Dmax f NCFE25-C400R/L-GX24-4-4 25 150 300 C4
NCFE25-C500R/L-GX24-4-4 25 150 300 C5
f = f1 + s/2
Ordering example, right-hand tool: NCFE25-C400R-GX24-3-1/ordering example, left-hand tool: NCFE25-C400L-GX24-3-1
Assembly parts Module size E25 E25

d1 C4 C5
Clamping screw for grooving insert FS1342 (Torx 15) FS1342 (Torx 15)
Handle key FS1048 (Torx 20) FS1048 (Torx 20)
Handle key for grooving insert FS1047 (Torx 15) FS1047 (Torx 15)
Screw for grooving module FS1054 (Torx 20) FS1054 (Torx 20)

Grooving
A2

f1 l4 s1
24,9 83 3 E25 MSS-E25R/L21-GX24-3C5070 C4-MSS-E25R/L00
29,9 83 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 C5-MSS-E25R/L00
24,9 83 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 C4-MSS-E25R/L00
24,3 83 4,2 E25 MSS-E25R/L25-GX24-4C5070 C4-MSS-E25R/L00
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – Axial grooving/contra

C...-NCFE...C
Walter Cut
– Walter Capto™
– Screw clamping/contra design
A2

Walter Capto™ in accordance with ISO 26623 NCFE25-C400R/L-GX24-3-1C 21 50 70 C4
NCFE25-C500R/L-GX24-3-1C 21 50 70 C5
NCFE25-C400R/L-GX24-3-2C 21 70 100 C4
NCFE25-C500R/L-GX24-3-2C 21 70 100 C5
4–5
NCFE25-C400R/L-GX24-3-3C 21 100 150 C4
s1
NCFE25-C500R/L-GX24-3-3C 21 100 150 C5
d1
NCFE25-C400R/L-GX24-3-4C 21 150 300 C4
NCFE25-C500R/L-GX24-3-4C 21 150 300 C5
NCFE25-C400R/L-GX24-4-1C 25 50 70 C4
NCFE25-C500R/L-GX24-4-1C 25 50 70 C5
NCFE25-C400R/L-GX24-4-2C 25 70 100 C4
l4
NCFE25-C500R/L-GX24-4-2C 25 70 100 C5
6
Tmax NCFE25-C400R/L-GX24-4-3C 25 100 150 C4
s
NCFE25-C500R/L-GX24-4-3C 25 100 150 C5
f1 NCFE25-C400R/L-GX24-4-4C 25 150 300 C4
Dmin f
Dmax NCFE25-C500R/L-GX24-4-4C 25 150 300 C5
f = f1 + s/2
Ordering example, right-hand tool: NCFE25-C400R-GX24-3-1C/ordering example, left-hand tool: NCFE25-C400L-GX24-3-1C
Assembly parts Module size E25 E25

d1 C4 C5
Clamping screw for grooving insert FS1342 (Torx 15) FS1342 (Torx 15)
Handle key FS1048 (Torx 20) FS1048 (Torx 20)
Handle key for grooving insert FS1047 (Torx 15) FS1047 (Torx 15)
Screw for grooving module FS1054 (Torx 20) FS1054 (Torx 20)

Grooving
A2

f1 l4 s1
27,2 83 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 C5-MSS-E25R/L00
22,2 83 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 C4-MSS-E25R/L00
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – 90° axial grooving

C...-NCOE
Walter Cut
– Walter Capto™
– Screw clamping
A2

Walter Capto™ in accordance with ISO 26623 NCOE25-C400R/L-GX24-3-1 21 50 70 C4
NCOE25-C500R/L-GX24-3-1 21 50 70 C5
NCOE25-C400R/L-GX24-3-2 21 70 100 C4
NCOE25-C500R/L-GX24-3-2 21 70 100 C5
4–5
NCOE25-C400R/L-GX24-3-3 21 100 150 C4
d1 NCOE25-C500R/L-GX24-3-3 21 100 150 C5

NCOE25-C400R/L-GX24-3-4 21 150 300 C4
NCOE25-C500R/L-GX24-3-4 21 150 300 C5
NCOE25-C400R/L-GX24-4-1 25 50 70 C4
l21 l4 NCOE25-C500R/L-GX24-4-1 25 50 70 C5
s1 Tmax s NCOE25-C400R/L-GX24-4-2 25 70 100 C4

NCOE25-C500R/L-GX24-4-2 25 70 100 C5
6
f NCOE25-C400R/L-GX24-4-3 25 100 150 C4
Dmin NCOE25-C500R/L-GX24-4-3 25 100 150 C5
Dmax
NCOE25-C400R/L-GX24-4-4 25 150 300 C4
NCOE25-C500R/L-GX24-4-4 25 150 300 C5
l4 = l21 + s/2
Ordering example, right-hand tool: NCOE25-C400R-GX24-3-1/ordering example, left-hand tool: NCOE25-C400L-GX24-3-1
Assembly parts
Module size E25
Handle key FS1048 (Torx 20)


Grooving
A2

f l21 s1
55 52,9 3 E25 MSS-E25R/L21-GX24-3C5070 C4-MSS-E25R/L90
60 52,9 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 C5-MSS-E25R/L90
55 52,9 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 C4-MSS-E25R/L90
55 52,3 4,2 E25 MSS-E25R/L25-GX24-4C5070 C4-MSS-E25R/L90
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Groove turning holders – 90° axial/contra

C...-NCOE...C
Walter Cut
– Walter Capto™
– Screw clamping/contra design
A2

Walter Capto™ in accordance with ISO 26623 NCOE25-C400R/L-GX24-3-1C 21 50 70 C4
NCOE25-C500R/L-GX24-3-1C 21 50 70 C5
NCOE25-C400R/L-GX24-3-2C 21 70 100 C4
NCOE25-C500R/L-GX24-3-2C 21 70 100 C5
4–5
NCOE25-C400R/L-GX24-3-3C 21 100 150 C4
d1 NCOE25-C500R/L-GX24-3-3C 21 100 150 C5
NCOE25-C400R/L-GX24-3-4C 21 150 300 C4
NCOE25-C500R/L-GX24-3-4C 21 150 300 C5
NCOE25-C400R/L-GX24-4-1C 25 50 70 C4
l21 l4 NCOE25-C500R/L-GX24-4-1C 25 50 70 C5
s1 s NCOE25-C400R/L-GX24-4-2C 25 70 100 C4
Tmax NCOE25-C500R/L-GX24-4-2C 25 70 100 C5

f
6
Dmin NCOE25-C400R/L-GX24-4-3C 25 100 150 C4
Dmax
NCOE25-C500R/L-GX24-4-3C 25 100 150 C5
NCOE25-C400R/L-GX24-4-4C 25 150 300 C4
NCOE25-C500R/L-GX24-4-4C 25 150 300 C5
l4 = l21 + s/2
Ordering example, right-hand tool: NCOE25-C400R-GX24-3-1C/ordering example, left-hand tool: NCOE25-C400L-GX24-3-1C
Assembly parts
Module size E25
Handle key FS1048 (Torx 20)


Grooving
A2

f l21 s1
60 50,2 3 E25 GX24-3E .. MSS-E25R/L21-GX24-3C70100 C5-MSS-E25R/L90
55 50,2 3 E25 GX24-3F .. MSS-E25R/L21-GX24-3C100150 C4-MSS-E25R/L90
GX24-4E6 ..
A 278 D1 A 394 A 402 A 400

Grooving
Cutting data for Walter Cut

Starting values for
cutting speed vc [m/min]
Tensile strength Rm
Brinell hardness HB
A2
Machining group 1
Material group
HC
and code letters WSM13S WSM23S
N/mm2
C ≤ 0.25% Annealed 125 430 P1 CC C 200 190
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC C 190 180
C > 0.55% Heat-treated 300 1010 P5 CC C 160 150
Annealed 175 590 P7 CC C 190 180
P Low-alloyed steel
Heat-treated 285 960 P8 CC C 160 150
Heat-treated 380 1280 P9 CC C 160 150
Annealed 200 680 P11 CC C 140 130

Hardened and tempered 300 1010 P12 CC C 120 110
Ferritic/martensitic, annealed 200 680 P14 CC C 190 180

Stainless steel
Martensitic, heat-treated 330 1110 P15 CC C 120 100
Austenitic, quench hardened 200 680 M1 CC C 190 170
Austenitic/ferritic, duplex 230 780 M3 CC C 170 150
Ferritic 200 400 K1 CC C 190 180
Malleable cast iron
Pearlitic 260 700 K2 CC C 170 160
Low tensile strength 180 200 K3 CC C 220 210
Grey cast iron
K High tensile strength/austenitic 245 350 K4 CC C 180 170
Ferritic 155 400 K5 CC C 220 210
Pearlitic 265 700 K6 CC C 180 170


Annealed 200 680 S1 CC C 110 100
Fe-based
Cast 320 1080 S5 CC C 80 70
S Pure titanium 200 680 S6 CC C 160 150
Titanium alloys α and β alloys, hardened 375 1260 S7 CC C 45 40
β alloys 410 1400 S8 CC C 35 30
Hardened and tempered 50 HRC – H1
Hardened steel Hardened and tempered 55 HRC – H2
H Hardened and tempered 60 HRC – H3
Hardened cast iron Hardened and tempered 55 HRC – H4
Note:
– The specified cutting data indicates standard values. For special applications, adjustment is recommended.
– If dry machining is possible, the tool life is reduced by 20-30% on average.
1
A 394 Technical information – Grooving

Grooving
1. Grooving and recessing 2. Parting off

Cutting material grades Cutting material grades
Starting values for Starting values for

cutting speed vc [m/min] cutting speed vc [m/min]
A2
HC HC HW
WSM33S WSM43S WKP13S WKP23S WKP33S WTA33 WSM13S WSM23S WSM33S WSM43S WKP23S WK1
180 170 220 200 180 190 190 180 170 160 190
170 160 200 180 170 180 180 170 160 150 170
150 140 190 170 160 160 160 150 140 130 160
170 160 200 180 170 180 180 170 160 150 170
140 130 170 150 150 120 150 140 130 120 140
170 160 200 180 170 180 180 170 160 150 170
160 150 200 180 160 180 180 170 150 140 170
110 100 170 150 150 150 150 140 100 90 140
100 100 170 150 130 130 150 140 90 90 140
100 80 60
120 110 180 170 160 180 130 120 110 100 120
90 80 160 150 140 140 110 100 80 70 100
100 80 60
160 140 200 180 160 180 180 170 150 130
80 60 130 120 110 100 100 90 70 50
150 130 150 170 160 140 120
80 60 130 120 110 100 100 90 70 50
130 110 130 150 140 120 100
170 190 160 140 100 180 170 160 180
150 170 130 100 60 160 150 140 160
200 350 330 250 260 230 220 210 230
160 310 300 290 210 190 180 170 190
200 300 290 280 240 210 200 190 210
160 260 250 240 190 170 160 150 170
220 200 180 190
900
600
350
250
400
300
200
90 80 100 90 80 70
40 30 50 40 30 25
70 60 80 70 60 50
60 50 70 60 50 40
60 50 70 60 50 40
130 120 150 140 130 110
35 30 50 40 30 25
25 40 30 25
HC = Coated carbide The specified cutting data are average standard values.
HW = Uncoated carbide For special applications, adjustment is recommended.
Technical information – Grooving A 395

Grooving
Cutting tool material application charts – Grooving
Carbide
A2 P M K N S H O 01 10 20 30 40
05 15 25 35 45
Coating method
Stainless steel
Hard materials
cutting properties
NF metals
Cast iron
Walter
Other
Steel

HC – M 10 CC
TiAlN + Al2O3
(Al)
HC – P 10 C
HC – M 20 CC
TiAlN + Al2O3
(Al)
HC – P 20 CC
HC – S 30 CC
TiAlN + Al2O3
WSM33S HC – M 30 CC PVD
(Al)
HC – P 30 CC
HC – S 45 CC
TiAlN + Al2O3
WSM43S HC – M 45 CC PVD
(Al)
HC – P 45 CC
HC – P 10 CC
TiCN + Al2O3
WKP13S HC – K 20 CC CVD
(+ TiCN)
HC – H 10 C
HC – P 20 CC
TiCN + Al2O3
WKP23S CVD
(+ TiCN)
HC – K 25 CC
HC – P 30 CC
TiCN + Al2O3
WKP33S CVD
(+ TiCN)
HC – K 30 CC
HW – N 10 CC
WK1 – –
HW – S 10 C
HC – P 10 CC
WTA33 CVD TiAlN + Al2O3

HC – K 10 C


Grooving
Geometry overview of cutting inserts
GX system: Grooving and parting off
Material groups
P M K N S H O A2

cutting properties
Stainless steel
Hard materials
View
NF metals
Main
Cast iron
Remarks/ Cut cutting s f
Other
Steel
Geometry field of applications Main cutting edge edge [mm] [mm]
CF6 1,5 0,03–0,10

– Low feeds 19°
– Low burr/centre pip formation 2 0,03–0,12
– Low cutting force CC CC CC CC C
2,5 0,03–0,15
6°
3 0,04–0,20
CF5 2 0,04–0,15
– Grooving and parting off 18° 2,5 0,05–0,15
operations
– Light to moderate feeds CC CC C CC CC C 3 0,08–0,20
– Good chip control 6°
4 0,10–0,22
– Low burr/centre pip formation
5 0,10–0,25
CE4 2 0,06–0,15
– Grooving and parting off 20° 12° 2,5 0,07–0,18
operations 3 0,09–0,30
– Moderate to high feeds CC C CC C C C
4 0,10–0,32
– Good chip constriction 6°
– Stable cutting edge 5 0,12–0,35
6 0,12–0,40
GD3 2 0,04–0,12
– Extremely soft cutting action 9° 2,5 0,06–0,14
– Light to moderate feeds 3 0,06–0,18
– General parting off and CC CC C C C C
4 0,10–0,20
grooving operations
6°
5 0,12–0,25
6 0,14–0,28
GD6 2 0,04–0,12
– Medium feeds 24° 15° 2,5 0,06–0,17
– Long-chipping materials 3 0,08–0,18
– Average machining conditions CC CC C C CC
4 0,10–0,22
6°
5 0,12–0,24
6 0,14–0,30

Grooving
Geometry overview of cutting inserts

(continued)
GX system: Grooving of circlip grooves
Material groups
A2 P M K N S H O

cutting properties
Stainless steel
Hard materials
View
NF metals
Main
Cast iron
Other
Steel
Cutting insert for circlip 0,6–1,99 0,05–0,10

grooves 2–2,99 0,05–0,12
10°
– Excellent surface quality
– All common circlip types 3–3,99 0,07–0,14
CC C CC
– Low burr formation 4–4,99 0,07–0,20
6°
5–5,99 0,08–0,20
GX system: Grooving, parting off and recessing
Material groups
P M K N S H O
cutting properties
Stainless steel
Hard materials
View
NF metals
Main
Cast iron
Remarks/ Cut cutting s ap f

Other
Steel
Geometry field of applications Main cutting edge edge [mm] [mm] [mm]
UD6 2 0,3–2,5 0,06–0,15

– Grooving in rust-resistant 20° 15° 2,5 0,3–2,5 0,08–0,14
steel 3 0,4–3,0 0,10–0,20
– Average feed range C CC C
4 0,5–3,5 0,12–0,25
– Soft cutting action 6°
5 0,5–3,0 0,12–0,30
6 0,6–3,5 0,14–0,35
UF4 2 0,3–2,5 0,10–0,15

32°
– All grooving operations 11° 2,5 0,3–2,5 0,10–0,18
– Good chip control 3 0,4–3,0 0,10–0,20
– Average feed range CC CC CC C C
4 0,5–3,5 0,10–0,30
– Positive cut
6°
5 0,5–3,5 0,12–0,35
6 0,6–4,0 0,14–0,40
UD4 3 0,4–2,0 0,08–0,20

– Large chip breaking area 4 0,5–2,8 0,10–0,30
7°
– Optimum chip breaking when
machining forged parts 5 0,5–3,0 0,12–0,35
CC C CC
– Stable cutting edge 6 0,6–3,5 0,14–0,40
– For moderate to high feeds 6°
8 0,9–4,0 0,14–0,40
UA4 2 0,3–2,5 0,08–0,15

– For cast iron machining 2,5 0,3–2,5 0,10–0,20
– For middle to high machining 3 0,4–3,0 0,10–0,22
parameters CC C
4 0,5–3,5 0,10–0,35
– For maximum process
reliability in cast iron
6° 5 0,5–3,0 0,12–0,35
machining 6 0,6–3,5 0,14–0,40

Grooving
GX system: Full radius cutting inserts for grooving and copy turning
Material groups
P M K N S H O A2

cutting properties
Stainless steel
Hard materials
View
NF metals
Main
Cast iron
Remarks/ Cut cutting s ap f
Other
Steel
Geometry field of applications Main cutting edge edge [mm] [mm] [mm]
20°
RK8 6 4,0 0,10–0,30
– Polished rake face
8 5,0 0,10–0,35
– Sharp cutting edge CC C
– Circumference fully ground
– Extremely positive 11°
RF8 2 0,1–1,0 0,08–0,25

– For copy and relief turning 17°
10° 3 0,1–1,5 0,10–0,30
– Circumference fully ground 4 0,1–2,0 0,12–0,45
– High surface quality CC CC C C CC
5 0,1–2,5 0,15–0,50
– Stable cutting edge
6° 6 0,1–3,0 0,15–0,55
8 0,2–4,0 0,18–0,60
RD4 2 0,2–1,0 0,08–0,25
– For copy turning 7° 3 0,5–1,5 0,10–0,35
– Outstanding chip control 4 0,5–2,0 0,15–0,50
during grooving CC C CC C
5 0,5–2,5 0,17–0,70
– For moderate to high feeds 6°
– Circumference-sintered 6 0,5–3,0 0,17–0,70

8 0,6–4,5 0,17–0,70
SX system: Grooving and parting off

Material groups
P M K N S H O
cutting properties
Stainless steel
Hard materials
View
NF metals
Main
Cast iron

Other
Steel
CF6 1,5 0,03–0,10

19°
– Low feeds
2 0,03–0,12
– Low burr/centre pip formation CC CC CC CC C
– Low cutting force 3 0,04–0,20
6°
CF5 1,5 0,03–0,13

– Grooving and parting off 18° 2 0,04–0,15
– Light to moderate feeds CC CC C CC CC C
4 0,10–0,20
– Good chip control 6°
– Low burr/centre pip formation 5 0,10–0,25
6 0,12–0,28
CE4 1,5 0,05–0,13
– Grooving and parting off 2 0,06–0,15
20° 12°
– Moderate to high feeds
4 0,10–0,32
– Good chip constriction CC C CC C C C
– Stable cutting edge 5 0,12–0,35
6°
6 0,12–0,40
8 0,20–0,50
10 0,25–0,55

Grooving
Assembly instructions for Walter Cut
Walter Cut – The strong connection GX: For grooving and turning
The axial clamping to the location face that occurs between the module and the
A2 basic holder when the clamping screws are tightened provides a backlash-free
connection that ensures maximum stability.
The graphics show the module when unclamped and clamped, and the forces
acting between the module and the tool.
Unclamped module
Gap between the module and the location face for axial clamping
The clamping screws and are used to

clamp the module.

Gap The grooving insert is clamped by the flexible
part of the module using a screw .
Important:
Follow the sequence for clamping the module.
Step Operation Screw no.
A Pre-tension the module – ( – )
B Re-tension the module – ( – )

Gap
C Clamp the GX grooving insert
Clamped module
Axial clamping to the location face

Backlash-free connection ensuring maximum stability
SX: For parting off and deep grooving
The clamping screws , and

are used to clamp the module.
Clamping screw
Self-clamping effect of the grooving
insert.
Section A–A:
Clamping screw Important:
with high Grooving module Follow the sequence for clamping the module.
clamping force
Clamping screw Step Operation Screw no.
A Pre-tension the module ––

Basic holder
B Re-tension the module ––
C Clamp the SX grooving insert Mounting wrench

Grooving
Replacing the cutting edge on Walter Cut tools with self-clamping system
Installing GX cutting inserts
A2
1. Insert the wrench 2. Open the clamp 3. Remove the old cutting 4. Insert the new cutting 5. Close the clamp
insert insert
Installing SX cutting inserts
Inserting the cutting insert Removing the cutting insert
Mounting wrench for GX/SX self-clamping system
Family Insert width s Shank/blade Mounting wrench

[mm] h = h1 [mm]

G1042 2–6 26–32 FS1494
FS1494
1,5 12–20 FS2249
2–3 12–16 FS2249

G2012
2–6 20–25 FS1494 FS2249
8–10 25–32 FS2274
1,5 26–32 FS2249

G2042-N
G2042-R/L 2–6 26–32 FS1494
G2042-R/L-C
FS2274
8–10 52 FS2274
Note:
The same wrench is used for the precision cooled tools (-P).

Grooving
Walter Cut tool standard/contra version
G1041R/L . . . / G1041R/L . . . C G2042R/L . . . / G2042R/L . . . C
Right-hand version Left-hand version

A2
Standard Contra Standard Contra

Example: G1041 . 32R–3T32GX24 Example: G1041 . 32R–3T32GX24C Example: G1041 . 32L–3T32GX24 Example: G1041 . 32L–3T32GX24
XLDE / XLDE . . . –C

Example: XLDER1616K–GX16–2 Example: XLDER1616K–GX16–2C Example: XLDEL1616K–GX16–2 Example: XLDEL1616K–GX16–2C
NCFE / NCFE . . . –C G1111

Example: NCFE25–2525R–GX24–4–3 Example: NCFE25–2525R–GX24–4–3C Example: NCFE25–2525L–GX24–4–3 Example: NCFE25–2525L–GX24–4–3C
G1111 . 2525R3T22–067GX24 G1111 . 2525L3T22–067GX24

Grooving
Cutting depths depending on turning diameter
A2
D
Tmax = Maximum cutting depth

depending on
turning diameter D
T1 T1 = Groove depth independent
of turning diameter D
Tmax
Cutting depth T [mm] Module size MSS–E12 . . .
8,0
Tmax 7,0 GX09
6,0
5,0
4,0
3,0
2,0
1,0
0,0
0 50 100 150 200 250 300 350 400 450 500
36 = diameter at maximum cutting depth Turning diameter [mm]

8,0
Tmax 7,0 GX09
6,0
5,0
4,0
3,0
2,0
1,0
0,0
0 50 100 150 200 250 300 350 400 450 500
Turning diameter [mm]
52 = diameter at maximum cutting depth

Grooving
Cutting depths depending on turning diameter (continued)

24,0
A2 23,0
22,0
Tmax 21,0 GX24
20,0
19,0
18,0
17,0
16,0
15,0
14,0
13,0
Tmax 12,0 GX16
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
0 50 100 150 200 250 300 350 400 450 500

24,0
23,0
22,0
Tmax 21,0 GX24
20,0
19,0
18,0
17,0
16,0
15,0
14,0
13,0
Tmax 12,0 GX16
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
0 50 100 150 200 250 300 350 400 450 500

Grooving

24,0
23,0 A2
22,0
Tmax 21,0 GX24
20,0
19,0
18,0
17,0
16,0
15,0
14,0
13,0
Tmax 12,0 GX16
11,0
10,0
9,0
8,0
7,0
6,0
5,0
0 50 100 150 200 250 300 350 400 450 500
Cutting depth T [mm] G1011-1616 . . . T21GX24 G1011-2020 . . . T21GX24

24,0
23,0
22,0
Tmax 21,0
20,0
19,0
18,0
17,0
16,0
16.1 = Tmax without diameter limit
15,0
14,0
13,0
12,0
11,0
10,0
9,0
8,0
7,0
6,0
5,0
4,0
0 50 100 150 200 250 300 350 400 450 500

Grooving
Cutting depth T [mm] G1011-2525 . . . T21GX24 G1011-2525 . . . T32GX24

34,0
A2 33,0
Tmax 32,0
31,0
30,0
29,0
28,0
27,0
26,0 25 = Tmax without diameter limit
25,0
24,0
23,0
22,0
Tmax 21,0
20,0
19,0
18,0
17,0
16,0
15,0
14,0
13,0
12,0
11,0
10,0
0 50 100 150 200 250 300 350 400 450 500
Cutting depth T [mm] G2012 . . . 1,5T15SX . . .

17,0
16,0
Tmax 15,0
14,0
12,0
11,0
10,0
0 50 100 150 200 250 300 350 400 450 500

Grooving
Cutting depth T [mm] G2012 . . . T16SX . . .

18,0
17,0 A2
Tmax 16,0
15,0
14,0
13,0
12,0
11,0 11.5 = Tmax without diameter limit
10,0
0 50 100 150 200 250 300 350 400 450 500
Cutting depth T [mm] G2012.2020 . . . T20SX . . .

22,0
21,0
Tmax 20,0
19,0
18,0
17,0
16,0
15,0
0 50 100 150 200 250 300 350 400 450 500

24,0
23,0
Tmax 22,0
21,0
20,0
19,0
18,0
17,0
0 50 100 150 200 250 300 350 400 450 500

Grooving

31,0
A2 30,0
Tmax 29,0
28,0
27,0
26,0
25,0
24,0
0 50 100 150 200 250 300 350 400 450 500
35,0
34,0
Tmax 33,0
32,0
31,0
30,0
29,0
27,0
26,0
0 50 100 150 200 250 300 350 400 450 500

43,0
42,0
41,0
Tmax 40,0
39,0
38,0
37,0
35,0
34,0
0 50 100 150 200 250 300 350 400 450 500

Grooving
Cutting depth T [mm] G2632-E20 . . . T20SX . . .

24,0
23,0 A2
22,0
21,0
Tmax 20,0
19,0
18,0
17,0
16,0
15,0
0 50 100 150 200 250 300 350 400 450 500

22,0
21,0
Tmax 20,0
19,0
18,0
17,0
16,0
15,0
14,0
13,0
0 50 100 150 200 250 300 350 400 450 500

37,0
36,0
Tmax 35,0
34,0
33,0
32,0
31,0
30,0
29,0
28,0
0 50 100 150 200 250 300 350 400 450 500

Grooving

47,0
A2 46,0
Tmax 45,0
44,0
43,0
42,0
41,0
40,0
39,0
38,0
0 50 100 150 200 250 300 350 400 450 500
Diameter range when using the G1511/G1521 tools for axial grooving
Diameter range
Minimum axial groove Dlim [mm]
Grooving insert width s
[mm] GX16 GX24
Dmin Dlim 2 112 120
2,5 92 240
3 81 65
4 75 62
5 63 51
6 53 43
Dmin = Dlim-2 × s

Grooving
Application information – Parting off
1. Basic principles
General 3. Use the largest tool possible – in relation to the height of the
support [h] A2
The most stable tool possible should always be selected. This prevents vibration
and increases the tool life. – Higher tool
rigidity
– Reduced vibration
h
– Longer tool life
h
Insert width
S
The insert width selected should be
as narrow as possible, but as wide
as necessary.
Reducing the insert width
reduces the cutting force and Effect of the approach angle on machining
saves material.
The design of the cutting inserts

(right/left) can be determined by
viewing the cutting edge from above,
Cutting depth unlike the tools, which are viewed
from the front instead.
1. The maximum cutting depth [Tmax] of
Neutral Right Left
the tool and the maximum clamping length
of the insert holder should not exceed
10 × cutting edge width [s].
The smallest possible cutting depth
should always be selected.
The following rule always applies:
Direction of rotation of the machine spindle:

Clockwise ‡ right cutting insert
2. Double-edged Walter Cut GX Anticlockwise ‡ left cutting insert
indexable inserts are the most efficient Tmax
option when the maximum cutting depth

does not exceed the second cutting edge.
At deeper cutting depths, single-edged Tmax
Walter Cut SX cutting inserts are the first
choice. When parting off solid material,
the use of inclined cutting inserts
reduces the formation of residual
pips on the component that has
been parted off.
1. Use a neutral cutting edge where possible
– Improved chip formation

– Lower resultant cutting forces
– Longer tool life
When parting off tubular material,

e
choic the use of inclined cutting inserts
First
prevents rings from forming. These
rings could remain on the parted
off component and interfere with
2. Use the smallest insert width possible the rest of the manufacturing
process. It also leads to reduced
S S
burr formation.
– Lower cutting force
– Reduced material consumption
=
S S
Note:
= The use of inclined cutting inserts always has a negative effect on the cutting
insert tool life. If possible, neutral cutting inserts should be used.

Grooving
1. Basic principles (continued) 2. User tips
When inclined cutting inserts are The tool must be aligned 90°
A2 used for parting off, the lead angle to the axis of rotation
is likely to be detrimental to chip
formation. – Better face flatness
– Reduced vibration tendency
The chip rolls at 90° to the
main cutting edge, preventing
it from forming a watch spring
shape (as with a neutral
cutting insert), and instead
causing it to form a helical
shape.
One option for guiding the chip is to interrupt cutting briefly once a cutting Checking the centre height
depth of 1-2 × s is reached.
Once cutting resumes, the chip flows in the existing groove. – Longer/more consistent tool life
– Reduced pip/burr formation
The feed values must be reduced by approximately 30%, because the tool tends
to run off-centre as a result of the axial force generated [Fn]. This can lead to
vibration and convex parted off surfaces.
Note:
If the tool is positioned over or under centre, the effective cutting angles change
during machining.
Mount the tool in the machine with the shortest possible overhang
– Better face flatness

– Reduced vibration tendency
– Improved tool life
Effects on machining L L
Neutral cutting Inclined cutting

insert insert
Clamp the workpiece at the shortest length possible
Stability and tool life good poor
Radial cutting forces (positive) high low
Axial cutting forces (negative) low high
Residual pip/burr formation large small

Reducing the feed
Risk of vibration low high
Surface quality and flatness good poor At a diameter of 1.5 × s mm or above,

Chip flow good poor reduce the feed [f] by 75 %, as the
cutting speed directly in the centre
is 0 m/min.
Do not groove past the centre, as there is
a risk of fracture.
It is possible to groove past the centre to
a maximum of corner radius +0.1 mm.
Example:
Corner radius 0.3 mm ‡ x = -0.4 mm
Maintain a constant cutting speed with speed limitation (max. bar feeder speed).

Grooving
2. User tips (continued)
Grooving on inclined surfaces Application conditions: Reinforced blades

A2
When grooving on inclined surfaces, the feed
over the inclined section must be reduced by
approx. 20-50 % and a sharper geometry must
be used (e.g. CF5).
“Overhead” installation position
Contra blade
G2042 . 32 . R-3T33SX-C
Retracting the tool
After parting off, do not retract the tool

immediately. First, retract in the axial M4 anticlockwise
direction and then retract radially. rotation
Main spindle Counter spindle
Chamfering and “Normal” installation position

parting off
G2042 . 32 . R–3T33SX
M3 clockwise
rotation
1. Pre-grooving 2. Chamfering 3. Parting off
Internal chamfering before parting off Main spindle Counter spindle
The peripheral cutting edges of the previous

chamfering tool and then the parting off tool
must be precisely aligned to achieve the most
burr-free result possible.
“Normal” installation position

Contra blade
G2042 . 32 . L–3T33SX–C
Parting off to a drilled hole
The hole must be pre-drilled to be

deep enough for the entire cutting
edge width of the parting off tool M3 clockwise
to exit in the cylindrical section of rotation
the drilled hole.
Main spindle Counter spindle

Grooving
3. Parting off fault analysis
Large residual pip/burr Poor face flatness

A2 − Reduce the feed value by 50-75% at a diameter − Use a cutting insert with as small a lead angle as possible or no lead angle
of 1.5 × s or above (s = cutting edge width) at all
− Use a cutting insert with a lead angle − Use a tool with the shortest possible cutting depth
− Use a narrower insert − Reduce the feed for cutting inserts with a lead angle
(reduction of cutting forces) − Use a smaller corner radius
− Use a smaller corner radius − Use a more positive geometry
− Use a more positive geometry − Align the tool
− Check the centre height
Poor surface/vibration Chip formation when parting off

− Use a more stable tool − Chip constriction prevents friction on the side walls of the tools and reduces
− Clamp the tool at a shorter length chip accumulation
− Check whether the insert seat is damaged − Enables higher feed values
− Use a more positive geometry − No damage to parted off surfaces
− Increase the feed − Chips are rolled up in a spiral shape and broken short, so that they can exit
the groove more easily
Damage caused by chips

− Use a chip formation with greater chip
constriction
− Reduce the cutting speed
− Use a straight cutting insert
− Optimise the cooling
− Increase the feed
Poor chip formation

− Reduce the cutting speed
− Improve the cooling
− Check the chip formation
− Increase the feed

Grooving
Application information – Grooving
1. Basic principles 2. User tips
General Note:
For grooving, only one cutting edge is used. A2
Using recessing tools enables This process also requires users to adhere to certain machining sequences,
machining steps to be consolidated depending on the machining operation, to achieve an optimum result.
and reduces the number of tools
required.
These tools are used in particular

for machining between shoulders Producing a narrow groove with chamfer
or when a limited number of tool
spaces are available.
A precise positive-locking connection between

the cutting insert and the insert seat enables both
radial and axial forces to be absorbed.
Grooving with Turn the chamfer Turn the chamfer

This enables grooving and longitudinal turning 0.1 mm material and finish the first and finish the second
removal on the flank flank
operations when using special chip forming diameter
geometries.
The universal geometries are perfectly suited
for this, e.g. UD4, UF4.
Producing a wide groove by grooving
Production strategy
There are two different basic Grooving

production strategies:
Grooving and recessing.
3 2 1 5 4
For grooving, the feed moves in only

one direction.
Longitudinal turning with low material
removal (approx. 0.1-0.3 mm) can
only be carried out as a finishing
operation. Recessing
Pre-grooving Pre-grooving Finishing
Web width = s - 2 × r ap max = r
s = cutting edge width/r = corner radius/ap max = max. depth of cut

Recessing is a combination of
grooving and longitudinal turning
movements.
Lateral offset [s] – [r]
Grooving or recessing? For laterally offset grooving, a universal “U” geometry

should be used if possible. When doing so, it is important
The machining strategy should be Grooving to ensure that the insert width is at least between
s/ and the cutting edge width of s – 1 × r.
selected based on the shape and size 2
of the groove to be produced. As a
rule of thumb, the following criteria ap min: 0.5 × s
can be used to make a decision: ap max: s – r
Grooving: Example:
The groove depth is 1.5 times greater s = 3.0 mm; r = 0.2 mm ‡ ap min: 1.5 mm
than the groove width. Recessing ap max: 2.8 mm
r
Recessing:
The groove width is 1.5 times greater s
than the groove depth. r

Grooving
Application information – Recessing
1. Basic principles
The tool must be aligned 90° to the axis of rotation. Surface quality produced by recessing in comparison to ISO turning
A2
This is the only way to ensure A “Wiper effect” is generated by
that a clearance angle can be deflecting the cutting insert when
created when the tool is turned recessing (see figure A).
in both directions.
Poor tool alignment generates
vibration and can lead to tool
breakage.
Deflection
Fig. A Fig. B
Deflection means the deformation of the cutting insert support caused by a force
[Fp]. This deflection is required in order to generate an adjacent clearance angle
[α] during the longitudinal turning operation.
Comparison of surface quality produced by recessing and by ISO turning

The degree of deflection is influenced by multiple factors:
– Depth of cut [ap]
– Feed [f]
– Cutting speed [vc] Ra [μm]
– Corner radius [r]
– Material to be machined α° 3,40
– Cutting depth of the tool [T] 3,20
– Width of the cutting insert support
Fp 3,00
2,80
2,60
2,40
2,20
2,00
1,80
Diameter compensation 1,60
1,40
The deflection produces different longitudinal ratios on the tool. In order to create
an even diameter during a finishing operation, diameter compensation must take 1,20
place when transitioning from the grooving movement to the longitudinal turning 1,00
movement.
0,80
1 Pre-machine the component up to the finishing operation 0,60
2. Groove to the final diameter 0,40
3. Retract by 0.1 mm 0,20
4. Turn longitudinally
5. Measure the grooving diameter and longitudinal turning diameter and correct 0
the retraction dimension (0.1 mm) by the difference in diameter. 0,05 0,1 0,15 0,2 0,25 0,3
f [mm/rev]
GX24-3E400N080-UF4 WSM33S
DNMG110404
DNMG110408

Grooving
2. User tips
Recessing Producing a recess:

A2
In order to ensure a reliable machining
process, certain movements must be
adhered to. 1. Roughing
For instance, a tool must not be subjected
to strain in two directions at the same time.
At all times, ensure that the strain on the
cutting edge is relieved after grooving
before starting the longitudinal turning
operation. Transition from longitudinal
turning to grooving applications requires
the strain on the cutting edge to be
relieved in the same way.
r 1. Grooving 3. Turn longitudinally

Rule of thumb for recessing: (ap longitudinal turning) 4. Retract by 0.1 mm in two directions
fstart 0.05 × s 2. Retract by 0.1 mm
s
fmax 0.07 × s
ap min r + 0.1 mm r
ap max 0.7 × s
Machining sequence
5. Grooving 7. Turn longitudinally to approximately
6. Retract by 0.1 mm 0.5 mm before the shoulder
At the end of the longitudinal turning 8. Retract by 0.1 mm in two directions
operation, retract in the opposite
direction to the direction of feed and
away from the machined diameter
by at least 0.1 mm.
This enables the cutting edge to
return to its original position. 2. Finishing
The next grooving operation can now

take place.
Before transitioning to the longitudinal
turning operation at this point, it is
necessary to retract again by approx.
0.1 mm.
1. Pre-groove at the radius tangent point to the required finished diameter
Preventing ring formation
2 3 4
1
2. Finish the first shoulder and copy the 4. Turn longitudinally up to the radius
radius tangent point
3. Retract by the diameter compensation 5. Retract by 0.1 mm in two directions
dimension
1. Turn longitudinally up to approx. 3. Position the tool above the ring

0.5-1.5 mm in front of the tool exit
4. Remove the ring in the grooving
2. Retract at an angle away from the operation
corner
6. Finish the second shoulder and copy the radius

Grooving
Application information – Recessing
2. User tips (continued) 3. Recessing fault analysis
Preventing vibration during copy turning Vibration during turning

A2 – The radius of the indexable insert should always be smaller than the workpiece – Check tool alignment
radius. (see page A 416)
– Reduce the feed in the workpiece radius range by 50% in comparison to the – Deflection of the cutting insert is too low
longitudinal cut. (see page A 416)
– Use a narrower insert (deflects more sharply)
Insert radius = workpiece radius Insert radius < workpiece radius – Use a smaller corner radius
Not recommended. Recommended. – Clamp the workpiece at a shorter length
Step in turning diameter

– Correct the retraction dimension before
the finishing cut
– Ensure even material removal
ap ap
– Check whether the insert seat is damaged
– Increase the cutting speed
– Use a more positive geometry
fn1 = longitudinal cuts – max. chip thickness 0.15-0.40 mm
fn2 = radius machining – 50% max. chip thickness
fn1
Damage caused by chips
fn1 fn1 – Use a chip formation with greater chip
fn2 constriction
fn2
fn2 fn2 – Optimise the cooling
fn1 fn1
Tool use
Ring formation
– Before inserting the cutting – Check the program sequence
insert, it is important to check (see page A 417)
to ensure that the insert seat
is free from dirt and damage.
– Insert the cutting insert along

the prismatic surfaces and into
the insert seat, and watch out Poor chip formation
for resistance. – Reduce the cutting speed
– Increase the feed
– Improve the cooling
– Check the chip formation
– To tighten the clamping screw,

use the screwdriver provided.
We recommend using a torque
wrench. The following values
are recommended for this:
Torque wrench values
Tightening
Tool torque
G15 . . 5,0 Nm
G1011 5,0 Nm
G1111 4,0 Nm
G1041 3,5 Nm
XLDE 3,5 Nm

Grooving
Application information – Grooving in general

Axial grooving
Basic principles Wear analysis
Flank face wear

Selecting a tool design – Use a more wear-resistant grade A2
– Improve the cooling
Plastic deformation
Right-hand tool Left-hand tool – Use a more wear-resistant grade
– Reduce the feed
Select the largest possible diameter range for the first groove
Fractures
– Use a tougher carbide grade
Note: – Use a more stable tool
The larger the in.
øm – Use a more stable geometry
diameter range of – Use a wider cutting edge if necessary
the first groove,
the better the chip
evacuation.
Built-up edge
– Increase the cutting speed
.
ax
øm
Crater wear
– Use a more wear-resistant grade
Expanding an axial groove
1. First groove on the largest

possible diameter
Notch or oxidation wear
– Reduce the feed
2. Expanding inwards
3. Expanding outwards

Grooving

Coolant hose set for shank tools with precision cooling (-P)
Shank tools -P
A2
m
30 m
m 10 m
K601 . . .
Note:
All shank tools with precision cooling are equipped with three
m coolant connection points. Before using the tools, ensure
10 m
that the unused connection points are sealed with the screws
provided in the set. The coolant sets K601 . . . for shank tool
m holders are approved for pressures from 10 bar to a maximum
30 m
of 275 bar.
Note:
The shank length of the tools can be shortened by up to 20 mm,
as the thread depth of all Walter Turn and Walter Cut square
G1/8" shanks with precision cooling is 30 mm.
Walter coolant hose set -P
Length
150 mm K601.01.150 SET K601.02.150 SET K601.03.150 SET
250 mm K601.01.250 SET K601.02.250 SET K601.03.250 SET
Individual components Designation 300 mm K601.01.300 SET K601.02.300 SET K601.03.300 SET
Set contents
M10 connection element FS2252 1× — —
G1/8" double connection

element
FS2253 2× 1× —
G1/8" angle connection FS2254 — 1× 2×
M10 angle connection FS2255 — 1× 1×

G1/4"-G1/8" reducer FS2256 — 1× 1×
Copper gasket FS2257 2× 3× 4×
G1/8" screw FS2258 1× 1× 1×
Brass blanking plug FS2259 1× 1× 1×
G1/8" brass nozzle FS2260 1× 1× 1×
O-ring FS2261 2× 2× 2×

A – Turning catalogue A 3: Thread turning
Page
Indexable inserts Product range overview A 423
Thread turning inserts – Partial profile A 426
Thread turning inserts – Full profile A 428
Walter NTS threading tools Product description A 444

A3
Thread turning tools A 450
Technical information Cutting data A 456
A 421
A 422
Thread turning

Thread turning
Indexable inserts Cutting tool materials: Carbide
01 10 20 30 40
Application Thread type Machining Page Application Coating 05 15 25 35 45
PVD
Partial profile WXP20
A3
ISO P
PVD WMP32
55° partial
Internal thread A 427
profile
PVD WXM20
General ISO M
machining
PVD WMP32
60° partial External thread A 426
profile Internal thread A 426 Wear resistance
Toughness
Full profile
ISO metric External thread A 428

60° Internal thread A 429
General
machining
American UN External thread A 430

American UNJ External thread A 432

Aerospace
External thread A 434

Whitworth
Steam, External thread A 436

American
gas and
NPTF Internal thread A 437
water lines
American External thread A 438

NPT Internal thread A 439

ACME
Transmission
thread with
trapezoidal
cross section
Stub ACME

Thread turning
Designation key
for thread turning inserts
Example:
NTS – E R – 16 0.50 ISO

Walter Thread System 1 2 3 4 5
1 2 3 4 5
A3
Machining Insert design Cutting edge length l Pitch P Standard
P
External thread 55 Partial profile 55°
E External thread
R L 60 Partial profile 60°
Full profile pitch range
I Internal thread
ISO ISO metric 60°
l [Threads/
[mm]
inch]
UN American UN 60°
0,35–12,0 72–2
UNJ American UNJ 60°
Internal thread Partial profile pitch range
[Threads/
W Whitworth
R L [mm]
inch]
NPTF NPTF
A 0,5–1,5 48–16
NPT NPT
AG 0,5–3,0 48– 8
ACME ACME
G 1,75–3,0 14–8
STACME Stub ACME
N 3,5–5,0 7–5
U 5,5–8,0 4½–3½
Q 5,5–6,0 4½–4
U 6,5–9,0 4–2¾
V 6,0–10,0 4–2½

Thread turning
Designation key
for carbide cutting tool materials – Thread turning
Example:
W M P 32
Walter 1 2 3
1 2 3
1. Primary application A3
2. Primary application ISO range of applications
or coating type
Wear Cutting tool materials for:

P Steel P Steel resistance
10 5 ISO turning
N NF metals N NF metals
20
21
3 Grooving
23
30
32
A coating
43

Thread turning
y
External thread – Partial profile 60° r
x 60˚
NTS thread turning inserts
l
Thread turning inserts
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch Pitch
(P) (TPI) l d r X Y
Designation mm inches mm mm mm mm mm
NTS-ER/L-16 AG60 0,50–3,0 48–8 16 9,525 0,08 1,2 1,7 a b
NTS-ER/L-16 G60 1,75–3,0 14–8 16 9,525 0,27 1,2 1,7 a b
NTS-ER/L-22 N60 3,50–5,0 7–5 22 12,7 0,53 1,7 2,5 a b
A3 HC = Coated carbide
y
Internal thread – Partial profile 60° r
x 60˚
NTS thread turning inserts l
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch Pitch
(P) (TPI) l d r X Y
NTS-IR/L-11 A60 0,50–1,5 48–16 11 6,35 0,05 0,8 0,9 b b
NTS-IR/L-16 AG60 0,50–3,0 48–8 16 9,525 0,05 1,2 1,7 a b
NTS-IR/L-16 G60 1,75–3,0 14–8 16 9,525 0,16 1,2 1,7 a b
NTS-IR/L-22 N60 3,50–5,0 7–5 22 12,7 0,53 1,7 2,5 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal thread – Partial profile 55° r
x 55˚
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch Pitch
(P) (TPI) l d r X Y
NTS-IR/L-11 A55 0,50–1,5 48–16 11 6,35 0,05 0,8 0,9 b b
HC = Coated carbide A3
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, ISO metric 60° 1/4 P
x 60˚
l h
d 1/8 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(P) l d hmin X Y
NTS-ER/L-16 0.50ISO 0,5 16 9,525 0,31 0,6 0,4 a b
NTS-ER/L-16 0.60ISO 0,6 16 9,525 0,37 0,6 0,6 a b
NTS-ER/L-16 0.70ISO 0,7 16 9,525 0,43 0,6 0,6 a b
NTS-ER/L-16 0.75ISO 0,75 16 9,525 0,46 0,6 0,6 a b
A3 NTS-ER/L-16 0.80ISO 0,8 16 9,525 0,49 0,6 0,6 a b
NTS-ER/L-16 1.00ISO 1 16 9,525 0,61 0,7 0,7 a b
NTS-ER/L-16 1.25ISO 1,25 16 9,525 0,77 0,8 0,9 a b
NTS-ER/L-16 1.50ISO 1,5 16 9,525 0,92 0,8 1 a b
NTS-ER/L-16 1.75ISO 1,75 16 9,525 1,07 0,9 1,2 a b
NTS-ER/L-16 2.00ISO 2 16 9,525 1,23 1 1,3 a b
NTS-ER/L-16 2.50ISO 2,5 16 9,525 1,53 1,1 1,5 a b
NTS-ER/L-16 3.00ISO 3 16 9,525 1,84 1,2 1,6 a b
NTS-ER/L-22 3.50ISO 3,5 22 12,7 2,15 1,6 2,3 a b
NTS-ER/L-22 4.00ISO 4 22 12,7 2,45 1,6 2,3 a b
NTS-ER/L-22 4.50ISO 4,5 22 12,7 2,76 1,7 2,4 a b
NTS-ER/L-22 5.00ISO 5 22 12,7 3,07 1,7 2,5 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, ISO metric 60° 1/4 P
x 60˚
h
d 1/8 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(P) l d hmin X Y
NTS-IR/L-11 0.75ISO 0,75 11 6,35 0,43 0,6 0,6 b b
NTS-IR/L-11 0.80ISO 0,8 11 6,35 0,46 0,6 0,6 b b
NTS-IR/L-11 1.00ISO 1 11 6,35 0,58 0,6 0,7 b b
NTS-IR/L-11 1.25ISO 1,25 11 6,35 0,72 0,8 0,9 b b
NTS-IR/L-11 1.50ISO 1,5 11 6,35 0,87 0,8 1 b b A3
NTS-IR/L-11 1.75ISO 1,75 11 6,35 1,01 0,9 1,1 b b
NTS-IR/L-11 2.00ISO 2 11 6,35 1,15 0,9 1,1 b b
NTS-IR/L-11 2.50ISO 2,5 11 6,35 1,44 0,8 1,1 b b
NTS-IR/L-16 0.50ISO 0,5 16 9,525 0,29 0,6 0,4 a b
NTS-IR/L-16 0.60ISO 0,6 16 9,525 0,35 0,6 0,6 a b
NTS-IR/L-16 0.70ISO 0,7 16 9,525 0,4 0,6 0,6 a b
NTS-IR/L-16 0.75ISO 0,75 16 9,525 0,43 0,6 0,6 a b
NTS-IR/L-16 0.80ISO 0,8 16 9,525 0,46 0,6 0,6 a b
NTS-IR/L-16 1.00ISO 1 16 9,525 0,58 0,6 0,7 a b
NTS-IR/L-16 1.25ISO 1,25 16 9,525 0,72 0,8 0,9 a b
NTS-IR/L-16 1.50ISO 1,5 16 9,525 0,87 0,8 1 a b
NTS-IR/L-16 1.75ISO 1,75 16 9,525 1,01 0,9 1,2 a b
NTS-IR/L-16 2.00ISO 2 16 9,525 1,15 1 1,3 a b
NTS-IR/L-16 2.50ISO 2,5 16 9,525 1,44 1,1 1,5 a b
NTS-IR/L-16 3.00ISO 3 16 9,525 1,73 1,1 1,5 a b
NTS-IR/L-22 3.50ISO 3,5 22 12,7 2,02 1,6 2,3 a b
NTS-IR/L-22 4.00ISO 4 22 12,7 2,31 1,6 2,3 a b
NTS-IR/L-22 4.50ISO 4,5 22 12,7 2,6 1,6 2,4 a b
NTS-IR/L-22 5.00ISO 5 22 12,7 2,89 1,6 2,4 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, American UN 60° 1/4 P
x 60˚
l h
d 1/8 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
Designation inches mm mm mm mm mm
NTS-ER/L-16 048UN 48 16 9,525 0,32 0,6 0,6 a b
NTS-ER/L-16 044UN 44 16 9,525 0,35 0,6 0,6 a b
NTS-ER/L-16 040UN 40 16 9,525 0,39 0,6 0,6 a b
NTS-ER/L-16 036UN 36 16 9,525 0,43 0,6 0,6 a b
A3 NTS-ER/L-16 032UN 32 16 9,525 0,49 0,6 0,6 a b
NTS-ER/L-16 028UN 28 16 9,525 0,56 0,6 0,7 a b
NTS-ER/L-16 027UN 27 16 9,525 0,58 0,7 0,8 a b
NTS-ER/L-16 024UN 24 16 9,525 0,65 0,7 0,8 a b
NTS-ER/L-16 020UN 20 16 9,525 0,78 0,8 0,9 a b
NTS-ER/L-16 018UN 18 16 9,525 0,87 0,8 1 a b
NTS-ER/L-16 016UN 16 16 9,525 0,97 0,9 1,1 a b
NTS-ER/L-16 014UN 14 16 9,525 1,11 1 1,2 a b
NTS-ER/L-16 013UN 13 16 9,525 1,2 1 1,3 a b
NTS-ER/L-16 012UN 12 16 9,525 1,3 1,1 1,4 a b
NTS-ER/L-16 011UN 11 16 9,525 1,42 1,1 1,5 a b
NTS-ER/L-16 010UN 10 16 9,525 1,56 1,1 1,5 a b
NTS-ER/L-16 009UN 9 16 9,525 1,73 1,2 1,7 a b
NTS-ER/L-16 008UN 8 16 9,525 1,95 1,2 1,6 a b
NTS-ER/L-22 007UN 7 22 12,7 2,22 1,6 2,3 a b
NTS-ER/L-22 006UN 6 22 12,7 2,6 1,6 2,3 a b
NTS-ER/L-22 005UN 5 22 12,7 3,12 1,7 2,5 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, American UN 60° 1/4 P
x 60˚
h
d 1/8 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-11 64UN 64 11 6,35 0,23 0,8 0,4 b b
NTS-IR/L-11 56UN 56 11 6,35 0,26 0,7 0,4 b b
NTS-IR/L-11 40UN 40 11 6,35 0,37 0,6 0,6 b b
NTS-IR/L-11 36UN 36 11 6,35 0,41 0,6 0,6 b b
NTS-IR/L-11 32UN 32 11 6,35 0,46 0,6 0,6 b b A3
NTS-IR/L-11 28UN 28 11 6,35 0,52 0,6 0,7 b b
NTS-IR/L-11 27UN 27 11 6,35 0,54 0,7 0,8 b b
NTS-IR/L-11 24UN 24 11 6,35 0,61 0,7 0,8 b b
NTS-IR/L-11 20UN 20 11 6,35 0,73 0,8 0,9 b b
NTS-IR/L-11 18UN 18 11 6,35 0,81 0,8 1 b b
NTS-IR/L-11 16UN 16 11 6,35 0,92 0,9 1,1 b b
NTS-IR/L-11 14UN 14 11 6,35 1,05 0,9 1,1 b b
NTS-IR/L-11 12UN 12 11 6,35 1,22 0,8 1,1 b b
NTS-IR/L-11 11UN 11 11 6,35 1,33 0,8 1,1 b b
NTS-IR/L-16 048UN 48 16 9,525 0,31 0,6 0,6 a b
NTS-IR/L-16 044UN 44 16 9,525 0,33 0,6 0,6 a b
NTS-IR/L-16 040UN 40 16 9,525 0,37 0,6 0,6 a b
NTS-IR/L-16 036UN 36 16 9,525 0,41 0,6 0,6 a b
NTS-IR/L-16 032UN 32 16 9,525 0,51 0,6 0,6 a b
NTS-IR/L-16 028UN 28 16 9,525 0,52 0,6 0,7 a b
NTS-IR/L-16 027UN 27 16 9,525 0,54 0,7 0,8 a b
NTS-IR/L-16 024UN 24 16 9,525 0,61 0,7 0,8 a b
NTS-IR/L-16 020UN 20 16 9,525 0,73 0,8 0,9 a b
NTS-IR/L-16 018UN 18 16 9,525 0,81 0,8 1 a b
NTS-IR/L-16 016UN 16 16 9,525 0,92 0,9 1,1 a b
NTS-IR/L-16 014UN 14 16 9,525 1,05 0,9 1,2 a b
NTS-IR/L-16 013UN 13 16 9,525 1,13 1 1,3 a b
NTS-IR/L-16 012UN 12 16 9,525 1,22 1,1 1,4 a b
NTS-IR/L-16 011UN 11 16 9,525 1,33 1,1 1,5 a b
NTS-IR/L-16 010UN 10 16 9,525 1,47 1,1 1,5 a b
NTS-IR/L-16 009UN 9 16 9,525 1,63 1,2 1,7 a b
NTS-IR/L-16 008UN 8 16 9,525 1,83 1,1 1,5 a b
NTS-IR/L-22 007UN 7 22 12,7 2,09 1,6 2,3 a b
NTS-IR/L-22 006UN 6 22 12,7 2,44 1,6 2,3 a b
NTS-IR/L-22 005UN 5 22 12,7 2,93 1,6 2,3 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, American UNJ 60° 5/16P IN
x 60˚
NTS thread turning inserts h
l
Rmax 0,18042P
d
Rmin 0,15011P EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 48UNJ 48 16 9,525 0,31 0,6 0,5 a b
NTS-ER/L-16 44UNJ 44 16 9,525 0,33 0,6 0,6 a b
NTS-ER/L-16 40UNJ 40 16 9,525 0,37 0,6 0,6 a b
NTS-ER/L-16 36UNJ 36 16 9,525 0,41 0,6 0,6 a b
A3 NTS-ER/L-16 32UNJ 32 16 9,525 0,46 0,6 0,7 a b
NTS-ER/L-16 28UNJ 28 16 9,525 0,52 0,7 0,7 a b
NTS-ER/L-16 24UNJ 24 16 9,525 0,61 0,7 0,8 a b
NTS-ER/L-16 20UNJ 20 16 9,525 0,73 0,8 0,9 a b
NTS-ER/L-16 18UNJ 18 16 9,525 0,81 0,8 1 a b
NTS-ER/L-16 16UNJ 16 16 9,525 0,92 0,9 1,1 a b
NTS-ER/L-16 14UNJ 14 16 9,525 1,05 1 1,2 a b
NTS-ER/L-16 13UNJ 13 16 9,525 1,13 1 1,3 a b
NTS-ER/L-16 12UNJ 12 16 9,525 1,22 1,1 1,3 a b
NTS-ER/L-16 11UNJ 11 16 9,525 1,33 1,2 1,5 a b
NTS-ER/L-16 10UNJ 10 16 9,525 1,47 1,2 1,5 a b
NTS-ER/L-16 9UNJ 9 16 9,525 1,63 1,3 1,7 a b
NTS-ER/L-16 8UNJ 8 16 9,525 1,83 1,2 1,6 a b
NTS-ER/L-22 7UNJ 7 22 12,7 2,09 1,7 2,3 a b
NTS-ER/L-22 6UNJ 6 22 12,7 2,44 1,7 2,3 a b
NTS-ER/L-22 5UNJ 5 22 12,7 2,93 1,8 2,5 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, American UNJ 60° 5/16P IN
x 60˚
h
Rmax 0,18042P
d Rmin 0,15011P EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-11 28UNJ 28 11 6,35 0,47 0,7 0,7 b b
NTS-IR/L-11 24UNJ 24 11 6,35 0,55 0,7 0,8 b b
NTS-IR/L-11 20UNJ 20 11 6,35 0,66 0,8 0,9 b b
NTS-IR/L-11 18UNJ 18 11 6,35 0,74 0,8 1 b b
NTS-IR/L-11 16UNJ 16 11 6,35 0,83 0,9 0,1 b b A3
NTS-IR/L-11 14UNJ 14 11 6,35 0,95 1 1,2 b b
NTS-IR/L-16 48UNJ 48 16 9,525 0,28 0,6 0,5 a b
NTS-IR/L-16 44UNJ 44 16 9,525 0,3 0,6 0,6 a b
NTS-IR/L-16 40UNJ 40 16 9,525 0,33 0,6 0,6 a b
NTS-IR/L-16 36UNJ 36 16 9,525 0,37 0,6 0,6 a b
NTS-IR/L-16 32UNJ 32 16 9,525 0,42 0,6 0,7 a b
NTS-IR/L-16 28UNJ 28 16 9,525 0,47 0,7 0,7 a b
NTS-IR/L-16 24UNJ 24 16 9,525 0,55 0,7 0,8 a b
NTS-IR/L-16 20UNJ 20 16 9,525 0,66 0,8 0,9 a b
NTS-IR/L-16 18UNJ 18 16 9,525 0,74 0,8 1 a b
NTS-IR/L-16 16UNJ 16 16 9,525 0,83 0,9 1,1 a b
NTS-IR/L-16 14UNJ 14 16 9,525 0,95 1 1,2 a b
NTS-IR/L-16 13UNJ 13 16 9,525 1,02 1 1,3 a b
NTS-IR/L-16 12UNJ 12 16 9,525 1,11 1,1 1,3 a b
NTS-IR/L-16 11UNJ 11 16 9,525 1,21 1,2 1,5 a b
NTS-IR/L-16 10UNJ 10 16 9,525 1,33 1,2 1,5 a b
NTS-IR/L-16 9UNJ 9 16 9,525 1,48 1,3 1,7 a b
NTS-IR/L-16 8UNJ 8 16 9,525 1,66 1,2 1,6 a b
NTS-IR/L-22 7UNJ 7 22 12,7 1,9 1,7 2,3 a b
NTS-IR/L-22 6UNJ 6 22 12,7 2,21 1,7 2,3 a b
NTS-IR/L-22 5UNJ 5 22 12,7 2,66 1,8 2,5 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, Whitworth r
R 0,137 x P
x 55˚
l
d R 0,137 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 048W 48 16 9,525 0,34 0,6 0,6 a b
NTS-ER/L-16 040W 40 16 9,525 0,41 0,6 0,6 a b
NTS-ER/L-16 036W 36 16 9,525 0,45 0,6 0,6 a b
NTS-ER/L-16 032W 32 16 9,525 0,51 0,6 0,6 a b
A3 NTS-ER/L-16 028W 28 16 9,525 0,58 0,6 0,7 a b
NTS-ER/L-16 026W 26 16 9,525 0,63 0,7 0,8 a b
NTS-ER/L-16 024W 24 16 9,525 0,68 0,7 0,8 a b
NTS-ER/L-16 022W 22 16 9,525 0,74 0,8 0,9 a b
NTS-ER/L-16 020W 20 16 9,525 0,81 0,8 0,9 a b
NTS-ER/L-16 019W 19 16 9,525 0,86 0,8 1 a b
NTS-ER/L-16 018W 18 16 9,525 0,9 0,8 1 a b
NTS-ER/L-16 016W 16 16 9,525 1,02 0,9 1,1 a b
NTS-ER/L-16 014W 14 16 9,525 1,16 1 1,2 a b
NTS-ER/L-16 012W 12 16 9,525 1,36 1,1 1,4 a b
NTS-ER/L-16 011W 11 16 9,525 1,48 1,1 1,5 a b
NTS-ER/L-16 010W 10 16 9,525 1,63 1,1 1,5 a b
NTS-ER/L-16 009W 9 16 9,525 1,81 1,2 1,7 a b
NTS-ER/L-16 008W 8 16 9,525 2,03 1,2 1,5 a b
NTS-ER/L-22 007W 7 22 12,7 2,32 1,6 2,3 a b
NTS-ER/L-22 006W 6 22 12,7 2,71 1,6 2,3 a b
NTS-ER/L-22 005W 5 22 12,7 3,25 1,7 2,4 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, Whitworth r
R 0,137 x P
55˚
x
l
d R 0,137 x P
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-11 48W 48 11 6,35 0,34 0,6 0,6 b b
NTS-IR/L-11 36W 36 11 6,35 0,45 0,6 0,6 b b
NTS-IR/L-11 32W 32 11 6,35 0,51 0,6 0,6 b b
NTS-IR/L-11 26W 26 11 6,35 0,63 0,7 0,8 b b
NTS-IR/L-11 24W 24 11 6,35 0,68 0,7 0,8 b b A3
NTS-IR/L-11 22W 22 11 6,35 0,74 0,8 0,9 b b
NTS-IR/L-11 20W 20 11 6,35 0,81 0,8 0,9 b b
NTS-IR/L-11 19W 19 11 6,35 0,86 0,8 1 b b
NTS-IR/L-11 18W 18 11 6,35 0,9 0,8 1 b b
NTS-IR/L-11 16W 16 11 6,35 1,02 0,9 1,1 b b
NTS-IR/L-11 14W 14 11 6,35 1,16 0,9 1,1 b b
NTS-IR/L-11 12W 12 11 6,35 1,32 0,9 1,2 b b
NTS-IR/L-16 048W 48 16 9,525 0,34 0,6 0,6 a b
NTS-IR/L-16 040W 40 16 9,525 0,41 0,6 0,6 a b
NTS-IR/L-16 036W 36 16 9,525 0,45 0,6 0,6 a b
NTS-IR/L-16 032W 32 16 9,525 0,51 0,6 0,6 a b
NTS-IR/L-16 028W 28 16 9,525 0,58 0,6 0,7 a b
NTS-IR/L-16 026W 26 16 9,525 0,63 0,7 0,8 a b
NTS-IR/L-16 024W 24 16 9,525 0,68 0,7 0,8 a b
NTS-IR/L-16 022W 22 16 9,525 0,74 0,8 0,9 a b
NTS-IR/L-16 020W 20 16 9,525 0,81 0,8 0,9 a b
NTS-IR/L-16 019W 19 16 9,525 0,86 0,8 1 a b
NTS-IR/L-16 018W 18 16 9,525 0,9 0,8 1 a b
NTS-IR/L-16 016W 16 16 9,525 1,02 0,9 1,1 a b
NTS-IR/L-16 014W 14 16 9,525 1,16 1 1,2 a b
NTS-IR/L-16 012W 12 16 9,525 1,36 1,1 1,4 a b
NTS-IR/L-16 011W 11 16 9,525 1,48 1,1 1,5 a b
NTS-IR/L-16 010W 10 16 9,525 1,63 1,1 1,5 a b
NTS-IR/L-16 009W 9 16 9,525 1,81 1,2 1,7 a b
NTS-IR/L-16 008W 8 16 9,525 2,03 1,2 1,5 a b
NTS-IR/L-22 007W 7 22 12,7 2,32 1,6 2,3 a b
NTS-IR/L-22 006W 6 22 12,7 2,71 1,6 2,3 a b
NTS-IR/L-22 005W 5 22 12,7 3,25 1,7 2,4 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, American NPTF IN
x 30˚ 30˚
l h
d 90˚ 1°47’
EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 27NPTF 27 16 9,525 0,64 0,7 0,8 a b
NTS-ER/L-16 18NPTF 18 16 9,525 1 0,8 1 a b
NTS-ER/L-16 14NPTF 14 16 9,525 1,35 0,9 1,2 a b
NTS-ER/L-16 11.5NPTF 11,5 16 9,525 1,63 1,1 1,5 a b
A3 NTS-ER/L-16 08NPTF 8 16 9,525 2,38 1,3 1,8 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, American NPTF 30˚ 30˚
IN
x
h
d 90˚ 1°47’
EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-16 27NPTF 27 16 9,525 0,64 0,7 0,8 a b
NTS-IR/L-16 18NPTF 18 16 9,525 1 0,8 1 a b
NTS-IR/L-16 14NPTF 14 16 9,525 1,35 0,9 1,2 a b
NTS-IR/L-16 11.5NPTF 11,5 16 9,525 1,63 1,1 1,5 a b
NTS-IR/L-16 08NPTF 8 16 9,525 2,38 1,3 1,8 a b A3
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, American NPT IN
x 30˚ 30˚
l h
d 90˚ 1°47’
EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 27NPT 27 16 9,525 0,66 0,7 0,8 a b
NTS-ER/L-16 18NPT 18 16 9,525 1,01 0,8 1 a b
NTS-ER/L-16 14NPT 14 16 9,525 1,33 0,9 1,2 a b
NTS-ER/L-16 11.5NPT 11,5 16 9,525 1,64 1,1 1,5 a b
A3 NTS-ER/L-16 08NPT 8 16 9,525 2,42 1,3 1,8 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, American NPT 30˚ 30˚
IN
x
h
d 90˚ 1°47’
EX
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-16 27NPT 27 16 9,525 0,66 0,7 0,8 a b
NTS-IR/L-16 18NPT 18 16 9,525 1,01 0,8 1 a b
NTS-IR/L-16 14NPT 14 16 9,525 1,33 0,9 1,2 a b
NTS-IR/L-16 11.5NPT 11,5 16 9,525 1,64 1,1 1,5 a b
NTS-IR/L-16 08NPT 8 16 9,525 2,42 1,3 1,8 a b A3
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, ACME
x 29°
l
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 16ACME 16 16 9,525 0,92 1 1,1 a b
NTS-ER/L-16 14ACME 14 16 9,525 1,03 1 1,2 a b
NTS-ER/L-16 12ACME 12 16 9,525 1,19 1,1 1,2 a b
NTS-ER/L-16 10ACME 10 16 9,525 1,52 1,3 1,4 a b
A3 NTS-ER/L-16 8ACME 8 16 9,525 1,84 1,4 1,5 a b
NTS-ER/L-22 6ACME 6 22 12,7 2,37 1,8 2,1 a b
NTS-ER/L-22 5ACME 5 22 12,7 2,79 2 2,3 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, ACME r
x 29°
l
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-16 16ACME 16 16 9,525 0,92 1 1,1 a b
NTS-IR/L-16 14ACME 14 16 9,525 1,03 1,1 1,2 a b
NTS-IR/L-16 12ACME 12 16 9,525 1,19 1,2 1,3 a b
NTS-IR/L-16 10ACME 10 16 9,525 1,52 1,2 1,3 a b
NTS-IR/L-16 8ACME 8 16 9,525 1,84 1,4 1,5 a b A3
NTS-IR/L-22 6ACME 6 22 12,7 2,37 1,8 2,1 a b
NTS-IR/L-22 5ACME 5 22 12,7 2,79 2 2,3 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
External – Full profile, stub ACME
x 29°
l
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-ER/L-16 16STACME 16 16 9,525 0,6 1 1 a b
NTS-ER/L-16 14STACME 14 16 9,525 0,67 1,1 1,1 a b
NTS-ER/L-16 12STACME 12 16 9,525 0,76 1,2 1,2 a b
NTS-ER/L-16 10STACME 10 16 9,525 1,02 1,2 1,3 a b
A3 NTS-ER/L-16 8STACME 8 16 9,525 1,21 1,4 1,5 a b
NTS-ER/L-16 6STACME 6 16 9,525 1,52 1,7 1,8 a b
NTS-ER/L-22 5STACME 5 22 12,7 1,78 2,1 2,3 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
y
Internal – Full profile, stub ACME r
x 29°
l
P M
HC HC
WXM20
WMP32
WMP32
WXP20
Pitch
(TPI) l d hmin X Y
NTS-IR/L-16 16STACME 16 16 9,525 0,6 1 1 a b
NTS-IR/L-16 14STACME 14 16 9,525 0,67 1,1 1,1 a b
NTS-IR/L-16 12STACME 12 16 9,525 0,76 1,1 1,2 a b
NTS-IR/L-16 10STACME 10 16 9,525 1,02 1,2 1,3 a b
NTS-IR/L-16 8STACME 8 16 9,525 1,21 1,4 1,5 a b A3
NTS-IR/L-16 6STACME 6 16 9,525 1,52 1,7 1,8 a b
NTS-IR/L-22 5STACME 5 22 12,7 1,78 2,1 2,3 a b
HC = Coated carbide
A 456 A 458 A 445 A 445

Thread turning
Walter NTS product description
Thread turning tool families – External machining
NTS-SE external thread holder

– Standard position
– Standard inclination angle 1.5°
– Insert sizes: NTS-ER/L-16 . . ., NTS-ER/L-22 . . .
C . . . -NTS-SE Walter Capto™ external thread holder

A3
C . . . -NTS-OE Walter Capto™ external thread holder, overhead

– Overhead position
– The Walter Capto™ polygon is rotated through 180°
Thread turning tool family – Internal machining
A . . . -NTS-I/S . . . -NTS-I internal thread boring bar

– Insert sizes: NTS-IR/L-11 . . ., NTS-IR/L-16 . . ., NTS-IR/L-22 . . .
C . . . -NTS-SI Walter Capto™ internal thread boring bar

– For NTS-I . . . -16, . . . -22 threading inserts
– Insert sizes: NTS-IR/L-16 . . ., NTS-IR/L-22 . . .
C . . . -NTS-OI Walter Capto™ internal thread boring bar, overhead

– The Walter Capto™ polygon is rotated through 180°
– Insert sizes: NTS-IR/L-16 . . ., NTS-IR/L-22 . . .
A 444 Walter NTS threading tools

Thread turning
Walter NTS threading tools product range overview

Thread turning tools – External machining
Type
NTS . . NTS . .
NTS-SE C...-NTS-SE C...-NTS-OE
Shank size h [mm] 12–40 C3–C6
Insert size l [mm] 16–22 16–22 16–22
Page A 450 A 451 A 452
A3
Walter NTS threading tools product range overview

Thread turning tools – Internal machining
Type
NTS . . NTS . .
A...-NTS-I S...-NTS-I C...-NTS-SI C...-NTS-OI
Shank size h [mm] 20 16–40
Insert size l [mm] 11–16 16–22 16–22 16–22
Page A 453 A 453 A 454 A 455
Walter NTS threading tools A 445

Thread turning
Thread turning system overview – Walter NTS external machining
VDI adaptors for square shanks Walter Capto™ adaptors Walter Capto™
with precision cooling for square shanks thread turning tools
C…-ASHR/L C …NTS-SE
A2120-VDI-P A2121-VDI-P C…-ASHR/L3 C…-ASHA C…NTS-OE
Page D 16 Page D 17 Page D 11 Page D 12 Page A 451
A3
Shank tools
e.g. NTS-SE
Page A 450
= Precision cooling

Thread turning
Thread turning system overview – Walter NTS internal machining
Walter Capto™
Adaptors for boring bars boring bars
for thread turning
C … -391.20 C…NTS-SI
C … -131 C … -391.27 C…NTS-OI
Page D 65 Page D 66 Page A 454
A3
Boring bars
e.g.
A…NTS-I
S…NTS-I
Page A 453

Thread turning
Designation key for Walter NTS
Example for external machining:
NTS S E L – 16 16 – 16
1 2 3 4 5 6 7
Example for internal machining:
A3 S 32 S – NTS I R – 16 – 16
11 12 13 1 3 4 7 10
1 2 3 4 5
Version Version Toolholder height h1
Tool range Tool position
Tool Shank [mm]
h1
NTS = Walter Thread System S Standard position E External R Right
O Overhead position I Internal L Left
11 12 13
Boring bar diameter d1 Tool length l1
Shank design
[mm] [mm]
A Solid steel design with Shank diameter in mm. A 32 P 170

internal coolant supply Figures after the decimal
point are ignored. B 40 Q 180
Single-digit numbers are C 50 R 200
preceded by a "0".
D 60 S 250
E 70 T 300
S Solid steel design without
U l1
internal coolant supply d1 F 80 350
G 90 V 400
H 100 W 450
J 110 X Special
d1 K 125 Y 500
L 140
M 150
N 160

Thread turning
C4 – NTS S E R – 27 050 – 16
14 1 2 3 4 8 9 7
A3
6 7 8 9 10
Toolholder width b Cutting edge length l f1 dimension Tool length l4 dmin dimension
[mm] [mm] [mm] [mm] [mm]
b dmin
f1
l4
l
l = 11
l = 16
l = 22
14
Coupling size d1
[mm]
C = Walter Capto™
ISO 26623
C3 d1 = 32
C4 d1 = 40
C5 d1 = 50
C6 d1 = 63
d1

Thread turning
Shank tool – External thread

NTS-SE
Walter NTS
Designation mm mm mm mm mm Type
h b NTS-SER/L1212-16 16 12 12 16 83,2 22
NTS-SER/L1616-16 16 16 16 16 100 22
NTS-SER/L2020-16 16 20 20 20 128,6 30 NTS-E . -16 ..
A3 NTS-SER/L2525-16 16 25 25 25 153,6 30
l1
NTS-SER/L3232-16 16 32 32 32 173,6 34
NTS-SER/L2525-22 22 25 25 25 155,7 36
l4 NTS-SER/L3232-22 22 32 32 32 175,7 36 NTS-E . -22 ..
h1 f
NTS-SER/L4040-22 22 40 40 40 205,7 36
l1
f
The toolholders listed are designed for an inclination angle of 1.5°

Ordering example, right-hand tool: NTS-SER1212-16/ordering example, left-hand tool: NTS-SEL1212-16
Assembly parts
Type NTS-E . -16 .. NTS-E . -22 ..
Left shim YI3 YI4
Right shim YE3 YE4
Clamping screw for threading insert FS2177 (Torx 10) FS2178 (Torx 20)
Clamping screw and washer
FS2179 (Torx 10) FS2180 (Torx 20)
for shim
Torx key FS1050 (Torx 10) FS256 (Torx 20)
A 426 D1 A 456 A 459

Thread turning
Turning toolholders – External thread

C...-NTS-SE
Walter NTS
– Walter Capto™
Tool d1 f l4
Designation mm mm mm Type
Walter Capto™ in accordance with ISO 26623 C3-NTS-SER/L22040-16 16 C3 22 40
d1 C4-NTS-SER/L27050-16 16 C4 27 50
NTS-E . -16 ..
C5-NTS-SER/L35060-16 16 C5 35 60
C6-NTS-SER/L45065-16 16 C6 45 65 A3
l4 C4-NTS-SER/L27050-22 22 C4 27 50
C5-NTS-SER/L35060-22 22 C5 35 60 NTS-E . -22 ..
f C6-NTS-SER/L45065-22 22 C6 45 65
l1
f

Ordering example, right-hand tool: C3-NTS-SER22040-16/ordering example, left-hand tool: C3-NTS-SEL22040-16
Assembly parts Type NTS-E . -16 .. NTS-E . -16 .. NTS-E . -16 .. NTS-E . -22 .. NTS-E . -22 ..
d1 [mm] C3 C4 C5/C6 C4 C5/C6
Left shim YI3 YI3 YI3 YI4 YI4
Right shim YE3 YE3 YE3 YE4 YE4
Clamping screw for threading insert FS2177 (Torx 10) FS2177 (Torx 10) FS2177 (Torx 10) FS2178 (Torx 20) FS2178 (Torx 20)
FS2179 (Torx 10) FS2179 (Torx 10) FS2179 (Torx 10) FS2180 (Torx 20) FS2180 (Torx 20)
for shim
Torx key FS1050 (Torx 10) FS1050 (Torx 10) FS1050 (Torx 10) FS256 (Torx 20) FS256 (Torx 20)
A 426 D1 A 456 A 459

Thread turning
Turning toolholders – External thread

C...-NTS-OE
Walter NTS
– Walter Capto™
Tool d1 f l4
Designation mm mm mm Type
Walter Capto™ in accordance with ISO 26623 C3-NTS-OER/L22040-16 16 C3 22 40
d1 C4-NTS-OER/L27050-16 16 C4 27 50
NTS-E . -16 ..
C5-NTS-OER/L35060-16 16 C5 35 60
A3 C6-NTS-OER/L45065-16 16 C6 45 65
C4-NTS-OER/L27050-22 22 C4 27 50
l4 C5-NTS-OER/L35060-22 22 C5 35 60 NTS-E . -22 ..
C6-NTS-OER/L45065-22 22 C6 45 65
f
l1

Ordering example, right-hand tool: C3-NTS-OER22040-16/ordering example, left-hand tool: C3-NTS-OEL22040-16
Assembly parts
Type NTS-E . -16 .. NTS-E . -22 ..
Left shim YI3 YI4
Right shim YE3 YE4
FS2179 (Torx 10) FS2180 (Torx 20)
for shim
A 426 D1 A 456 A 459

Thread turning
Boring bar – Internal thread

A...-NTS-I / S...-NTS-I
Walter NTS
Tool Dmin d1 f h l1 l4
Designation mm mm mm mm mm mm β Type
A20Q-NTS-IR/L11-12 11 12 20 7,3 18 180 25 3°
f
A20Q-NTS-IR/L11-13 11 13 20 7,4 18 180 25 1,5° NTS-I . -11 ..
l4 A20Q-NTS-IR/L11-16 11 16 20 8,9 18 180 32 1,5°
l1
A20Q-NTS-IR/L16-16 16 16 20 10,2 18 180 34 2,5° NTS-I . -16 .. A3
f h
l1 Dmin
d1
S20Q-NTS-IR/L16-17 16 17 20 10,3 18 180 32 1,5°

f
S16M-NTS-IR/L16-20 16 20 16 11,3 15,2 150 32 1,5°
l4 S20Q-NTS-IR/L16-20 16 20 20 11,5 18 180 40 1,5°
l1
S20Q-NTS-IR/L16-24 16 24 20 13,4 18 180 40 1,5°
h NTS-I . -16 ..
f S25R-NTS-IR/L16-29 16 29 25 16,1 22,6 200 45 1,5°
l1 Dmin
S32S-NTS-IR/L16-29 16 29 32 16,3 29 250 60 1,5°
d1
S32S-NTS-IR/L16-36 16 36 32 19,6 29 250 60 1,5°
S40T-NTS-IR/L16-44 16 44 40 23,8 25,8 300 60 1,5°
S20Q-NTS-IR/L22-27 22 27 20 15,6 18 180 50 1,5°
S25R-NTS-IR/L22-32 22 32 25 17,2 22,6 200 45 1,5°
S32S-NTS-IR/L22-32 22 32 32 17,4 29 250 60 1,5° NTS-I . -22 ..
S32S-NTS-IR/L22-39 22 39 32 21,5 29 250 60 1,5°
S40T-NTS-IR/L22-47 22 47 40 25,8 32 300 60 1,5°
For information on the inclination angle β, see “Technical information − Thread turning”
Ordering example, right-hand tool: A20Q-NTS-IR11-12/ordering example, left-hand tool: A20Q-NTS-IL11-12
Assembly parts Type NTS-I . -11 .. NTS-I . -16 .. NTS-I . -16 .. NTS-I . -22 .. NTS-I . -22 ..
Dmin [mm] 12–16 16–20 24–44 27 32–47
Left shim YI3 YI4
Right shim YE3 YE4
FS2174
Clamping screw for threading insert FS2175 (Torx 10) FS2177 (Torx 10) FS2176 (Torx 20) FS2178 (Torx 20)
(Torx 8IP)
0,9 Nm
FS2179 (Torx 10) FS2180 (Torx 20)
for shim
Torx key FS257 (Torx 8) FS1050 (Torx 10) FS1050 (Torx 10) FS256 (Torx 20) FS256 (Torx 20)
A 427 D1 A 456 A 459

Thread turning

C...-NTS-SI
Walter NTS
– Walter Capto™

Designation mm mm d1 mm mm mm Type
Walter Capto™ in accordance with ISO 26623 C3-NTS-SIR/L22085-16 16 40 32 C3 22 85 70
d2 C4-NTS-SIR/L22090-16 16 40 32 C4 22 90 69
C4-NTS-SIR/L27080-16 16 50 39,5 C4 27 80 60
A3 f
d1
C5-NTS-SIR/L22090-16 16 40 32 C5 22 90 68 NTS-I . -16 ..
l16 C5-NTS-SIR/L27105-16 16 50 40 C5 27 105 84
l4
C6-NTS-SIR/L22090-16 16 40 32 C6 22 90 64
f C6-NTS-SIR/L27105-16 16 50 40 C6 27 105 80
l1 C4-NTS-SIR/L22090-22 22 40 31,5 C4 22 90 69
Dmin C4-NTS-SIR/L27080-22 22 50 39,5 C4 27 80 60
C5-NTS-SIR/L22090-22 22 40 31,5 C5 22 90 68
NTS-I . -22 ..
C5-NTS-SIR/L27105-22 22 50 40 C5 27 105 84
C6-NTS-SIR/L22090-22 22 40 31,5 C6 22 90 64
C6-NTS-SIR/L27105-22 22 50 40 C6 27 105 80
Ordering example, right-hand tool: C3-NTS-SIR22085-16/ordering example, left-hand tool: C3-NTS-SIL22085-16
Assembly parts
Type NTS-I . -16 .. NTS-I . -22 ..
Left shim YI3 YI4
Right shim YE3 YE4
FS2179 (Torx 10) FS2180 (Torx 20)
for shim
A 426 D1 A 456 A 459

Thread turning

C...-NTS-OI
Walter NTS
– Walter Capto™

Designation mm mm d1 mm mm mm Type
Walter Capto™ in accordance with ISO 26623 C3-NTS-OIR/L22085-16 16 40 32 C3 22 85 70
d2 C4-NTS-OIR/L22090-16 16 40 32 C4 22 90 69
f C4-NTS-OIR/L27080-16 16 50 39,5 C4 27 80 60
d1
C5-NTS-OIR/L22090-16 16 40 32 C5 22 90 68 NTS-I . -16 .. A3
l16 C5-NTS-OIR/L27105-16 16 50 40 C5 27 105 84
l4
C6-NTS-OIR/L22090-16 16 40 32 C6 22 90 64
l1 C6-NTS-OIR/L27105-16 16 50 40 C6 27 105 80
f C4-NTS-OIR/L22090-22 22 40 31,5 C4 22 90 69
Dmin C4-NTS-OIR/L27080-22 22 50 39,5 C4 27 80 60
C5-NTS-OIR/L22090-22 22 40 31,5 C5 22 90 68
NTS-I . -22 ..
C5-NTS-OIR/L27105-22 22 50 40 C5 27 105 84
C6-NTS-OIR/L22090-22 22 40 31,5 C6 22 90 64
C6-NTS-OIR/L27105-22 22 50 40 C6 27 105 80
Ordering example, right-hand tool: C3-NTS-OIR22085-16/ordering example, left-hand tool: C3-NTS-OIL22085-16
Assembly parts
Type NTS-I . -16 .. NTS-I . -22 ..
Left shim YI3 YI4
Right shim YE3 YE4
FS2179 (Torx 10) FS2180 (Torx 20)
for shim
A 426 D1 A 456 A 459

Thread turning
Cutting data for thread turning

Carbide grades
= Cutting data for wet machining
Tensile strength Rm
Brinell hardness HB
Machining group 1
Material group

and code letters
N/mm2
C ≤ 0.25% Annealed 125 430 P1 CC
C > 0.25 to ≤ 0.55% Annealed 190 640 P2 CC
C > 0.25 to ≤ 0.55% Heat-treated 210 710 P3 CC

Non-alloyed steel
C > 0.55% Annealed 190 640 P4 CC
C > 0.55% Heat-treated 300 1010 P5 CC
A3 Free cutting steel (short-chipping) Annealed 220 750 P6 CC
Annealed 175 590 P7 CC
P Low-alloyed steel
Heat-treated 285 960 P8 CC
Annealed 200 680 P11 CC

Hardened and tempered 300 1010 P12 CC
Hardened and tempered 380 1280 P13 CC
Ferritic/martensitic, annealed 200 680 P14 CC

Stainless steel
Martensitic, heat-treated 330 1110 P15 CC
Austenitic, quench hardened 200 680 M1 CC
M Stainless steel Austenitic, precipitation hardened (PH) 300 1010 M2 CC
Austenitic/ferritic, duplex 230 780 M3 CC
Ferritic 200 400 K1 CC

Malleable cast iron
Pearlitic 260 700 K2 CC
Low tensile strength 180 200 K3 CC

Grey cast iron
K High tensile strength/austenitic 245 350 K4 CC
Ferritic 155 400 K5 CC

Pearlitic 265 700 K6 CC
GGV (CGI) 230 400 K7

Not hardenable 30 – N1 CC
Hardenable, hardened 100 340 N2 CC
≤ 12% Si, not hardenable 75 260 N3 CC
Cast aluminium alloys ≤ 12% Si, hardenable, hardened 90 310 N4 CC

Non-alloyed, electrolytic copper 100 340 N7 CC
Copper and copper alloys Brass, bronze, red brass 90 310 N8 CC

(bronze/brass) Cu-alloys, short-chipping 110 380 N9 CC

Annealed 200 680 S1
Fe-based
Hardened 280 940 S2
Heat-resistant alloys Annealed 250 840 S3
Ni or Co base Hardened 350 1180 S4
Cast 320 1080 S5
S Pure titanium 200 680 S6
Titanium alloys α and β alloys, hardened 375 1260 S7
β alloys 410 1400 S8
Hardened and tempered 50 HRC – H1
Hardened steel Hardened and tempered 55 HRC – H2
H Hardened and tempered 60 HRC – H3
Hardened cast iron Hardened and tempered 55 HRC – H4
Thermosetting plastics Without abrasive fillers O2 C

1
A 456 Technical information

Thread turning

HC
WXP20 WXM20 WMP32
Pitch [mm] 0,5–1,25 1,5–3,0 0,5–1,25 1,5–6,0 0,5–1,25 1,5–6,0
Pitch [TPI] 48–19 18–10 48–19 18–5 48–19 18–10
200 240 180 215

180 200 160 180
150 180 135 160
160 180 145 160
80 100 70 90
180 220 160 200 A3
150 170 135 155
80 120 70 110
60 80 55 70
50 65 45 60
90 100 80 90
50 60 45 55
50 65 45 60
110 130 150 180 100 115
40 50 120 150 35 45
180 220 180 220
60 70 60 70
150 190 150 190
100 120 90 110
80 100 70 90
170 200 155 180
120 150 110 135
100 120 90 110
80 90 70 80
350 400
250 300
380 400
270 320
220 250
220 250
180 200
220 250
HC = Coated carbide
Technical information A 457

Thread turning
Cutting tool material application charts – Thread turning
Carbide

P M K N S H O 01 10 20 30 40
05 15 25 35 45
Coating method
Stainless steel
Hard materials
cutting properties
NF metals
Cast iron
Walter
Other
Steel

HC – P 20 CC
WXP20 PVD TiN
HC – K 20 C
HC – M 20 CC
A3
WXM20 PVD TiCN
HC – N 20 C
HC – P 30 CC
WMP32 HC – M 30 CC PVD TiAlN
HC – K 30 C


Thread turning
Walter NTS thread turning – Application strategy
Performance characteristics External machining
L Right-hand thread
Right-hand tool holder
Right-hand insert
– Precision-ground profile
– Ground-in chip breaker
Right-hand thread
Left-hand tool holder R A3
– Excellent cutting behaviour and reliable chip control thanks Left-hand insert
to the positive cutting edge shape Opposite inclination angle
– Right-hand and left-hand versions available
– By changing the shim, a thread running in the opposite direction
can be produced
– High repeat accuracy Left-hand thread
– Extensive profile versatility Right-hand tool holder
Right-hand insert L
– Full profile and partial profile Opposite inclination angle
– PVD-coated carbide grades
Left-hand thread
Left-hand tool holder
Left-hand insert
R
Internal machining
Right-hand thread Left-hand thread

Right-hand tool holder Left-hand tool holder
Right-hand insert Left-hand insert
R L
Right-hand thread Left-hand thread

Left-hand tool holder Right-hand tool holder
Left-hand insert Right-hand insert
Opposite inclination angle Opposite inclination angle
L R

Thread turning
Thread turning – Inclination angle correction
Inclination angle diagram
Standard inclination angle

Feed rate in the direction of β 5° 4° 3° 2° 1°
Pitch P [mm]
Pitch P [TPI]
the head stock
Special 4
6 turning gle
n 4.5
tool- iona 5
5 at
β holder lin
nc 6
4 di
dar
an 7
3 St
H 9
1.5° 2 11
Standard 14
1 18
Pitch diameter d2 [mm] 24
A3 0
50 100 150 200 °
Opposite inclination angle 1 24
Feed rate in the direction of 18
the tail stock
2 14
11
3 9
7
–β
4
Special turning
6
5
toolholder 5
6 4.5
H
1.5° 4
Standard
β –2° –1°
The colours in the inclination angle diagram correspond to the colours in the shim table.
No values must be read off.
Inclination angle calculation
β
The inclination angle is calculated according to the following formula:
P
d2
β = Inclination angle [°]
P
β = arctan P = Thread pitch [mm]
∏ × d2 d2 = Pitch diameter [mm]
The inclination angle can also be determined using the diagram.

The suitable shim is selected in accordance with the relevant table.
Shims
The external and internal standard

Insert size Order no.
tool holders have an inclination angle Tool
of β = 1.5°. IC L [mm] holder β = 4.5° β = 3.5° β = 2.5° β = 1.5° β = 0.5° β=0 β = –0.5° β = –1.5°
With an insert size of 1/4" (11 mm), ER / IL YE 3–3P YE 3–2P YE 3–1P YE 3 YE 3–1N YE 3–1.5N YE 3–2N YE 3–3N
the inclination angle is corrected via 3/8” 16
the tool. EL / IR YI 3–3P YI 3–2P YI 3–1P YI 3 YI 3–1N YI 3–1.5N YI 3–2N YI 3–3N
ER / IL YE 4–3P YE 4–2P YE 4–1P YE 4 YE 4–1N YE 4–1.5N YE 4–2N YE 4–3N

1/2” 22
EL / IR YI 4–3P YI 4–2P YI 4–1P YI 4 YI 4–1N YI 4–1.5N YI 4–2N YI 4–3N

Thread turning
Standard values for thread turning with Walter NTS
Feed types and their influence on machining
Radial feed Feed via flank 27°-29° Alternating feed
Recommended for: Recommended for: Recommended for:

– Short-chipping materials – Pitches greater than 1.5 mm or 16 TPI – Steep pitches
– Hard materials – The manufacture of trapezoidal threads – Long-chipping materials
A3
0°
27°
– Formation of V-shaped chips – Good chip formation – Good chip formation

– Both cutting edges engaged – Formation of helical chips – Formation of flat helical chips
– High cutting temperature – One cutting edge engaged – Both cutting edges are evenly
– Even indexable insert wear on both flanks – Chips are directed away from the thread engaged, ensuring even wear
– Suitable for small pitches – Thread flanks with excellent surface quality
Standard values for the number of radial infeeds

for each thread turning pass on manual lathes
The recommended cut distributions are only to be regarded as standard values. They were determined under good operating conditions with medium-strength steel
materials. In the case of high-strength steel materials, the number of feeds must be increased. It is important to reduce the initial threading cuts in this case.
If the operating conditions are different, the feeds should be modified accordingly. This applies to internal thread turning with a projection length of more than
2.5 × the boring bar diameter.
Whitworth (WH), external and internal machining
Pitch [TPI]
No. of feeds 28 26 20 19 18 16 14 12 11 10 9 8 7 6 5
Total depth [mm] 0,64 0,68 0,87 0,91 1,07 1,12 1,23 1,42 1,54 1,69 1,87 2,09 2,41 2,80 3,34
16
15
14 0,10 0,10
13 0,12 0,12
12 0,08 0,08 0,14 0,15
11 0,08 0,12 0,12 0,14 0,17
10 0,08 0,12 0,12 0,14 0,15 0,18
9 0,08 0,12 0,12 0,13 0,15 0,16 0,19
8 0,08 0,08 0,08 0,12 0,13 0,13 0,14 0,16 0,17 0,20
7 0,08 0,10 0,11 0,13 0,13 0,13 0,14 0,15 0,18 0,19 0,22
6 0,08 0,08 0,11 0,10 0,12 0,14 0,14 0,15 0,15 0,16 0,19 0,20 0,24
5 0,08 0,08 0,11 0,12 0,13 0,12 0,13 0,15 0,16 0,16 0,17 0,18 0,21 0,21 0,27
4 0,11 0,11 0,13 0,13 0,14 0,14 0,15 017 0,18 0,18 0,19 0,20 0,23 0,24 0,30
3 0,12 0,14 0,15 0,16 0,17 0,16 0,18 0,21 0,21 0,21 0,22 0,23 0,27 0,28 0,36
2 0,15 0,16 0,19 0,20 0,21 0,20 0,22 0,26 0,25 0,26 0,27 0,28 0,33 0,34 0,41
1 0,18 0,19 0,21 0,22 0,23 0,22 0,24 0,28 0,27 0,27 0,28 0,30 0,35 0,36 0,43
Radial infeed [mm]

Reduce the cutting speed

Thread turning
Application information: Standard values for thread turning with Walter NTS
(continued)
External machining, metric 60°
Pitch [mm]
No. of feeds 0,5 0,6 0,7 0,75 0,8 1,0 1,25 1,5 1,75 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0
Total depth [mm] 0,34 0,40 0,47 0,50 0,54 0,67 0,80 0,94 1,14 1,28 1,58 1,89 2,20 2,50 2,80 3,12 3,41 3,72
16 0,10 0,10
15 0,12 0,12
14 0,08 0,10 0,10 0,13 0,14
13 0,11 0,12 0,12 0,13 0,15
12 0,08 0,08 0,12 0,13 0,15 0,15 0,16
11 0,10 0,11 0,12 0,14 0,16 0,16 0,18
10 0,08 0,11 0,12 0,13 0,15 0,17 0,17 0,19
9 0,11 0,12 0,14 0,14 0,16 0,18 0,18 0,20
8 0,08 0,08 0,11 0,12 0,14 0,15 0,17 0,19 0,19 0,21
A3 7 0,10 0,11 0,12 0,13 0,15 0,16 0,18 0,20 0,20 0,22
6 0,08 0,08 0,10 0,12 0,13 0,14 0,17 0,17 0,20 0,22 0,22 0,24
5 0,08 0,10 0,12 0,12 0,14 0,15 0,16 0,18 0,19 0,22 0,24 0,24 0,27
4 0,07 0,07 0,07 0,07 0,08 0,11 0,11 0,14 0,14 0,16 0,17 0,18 0,21 0,22 0,24 0,27 0,27 0,30
3 0,07 0,08 0,10 0,11 0,12 0,13 0,14 0,17 0,17 0,18 0,20 0,21 0,25 0,25 0,28 0,32 0,32 0,35
2 0,09 0,11 0,14 0,15 0,16 0,16 0,17 0,21 0,21 0,24 0,24 0,26 0,31 0,32 0,34 0,39 0,40 0,43
1 0,11 0,14 0,16 0,17 0,18 0,19 0,20 0,22 0,22 0,25 0,27 0,28 0,34 0,34 0,37 0,41 0,43 0,46
Radial infeed [mm]

Internal machining, metric 60°
Pitch [mm]
No. of feeds 0,5 0,6 0,7 0,75 0,8 1,0 1,25 1,5 1,75 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0
Total depth [mm] 0,34 0,38 0,44 0,48 0,51 0,63 0,77 0,90 1,07 1,20 1,49 1,77 2,04 2,32 2,62 2,89 3,20 3,46
16 0,10 0,10
15 0,12 0,12
14 0,08 0,10 0,10 0,12 0,13
13 0,10 0,11 0,12 0,13 0,14
12 0,08 0,08 0,10 0,12 0,14 0,14 0,15
11 0,09 0,10 0,11 0,12 0,14 0,14 0,15
10 0,08 0,10 0,11 0,12 0,13 0,15 0,15 0,16
9 0,10 0,10 0,12 0,12 0,14 0,15 0,16 0,18
8 0,08 0,08 0,10 0,11 0,13 0,13 0,15 0,16 0,17 0,19
7 0,09 0,10 0,11 0,12 0,14 0,14 0,16 0,17 0,18 0,20
6 0,08 0,08 0,09 0,11 0,12 0,13 0,15 0,15 0,19 0,20 0,20 0,22
5 0,08 0,09 0,11 0,10 0,12 0,13 0,14 0,17 0,18 0,21 0,22 0,22 0,24
4 0,07 0,07 0,07 0,07 0,07 0,09 0,10 0,13 0,13 0,14 0,15 0,16 0,19 0,21 0,23 0,25 0,26 0,28
3 0,07 0,08 0,08 0,10 0,11 0,11 0,13 0,15 0,15 0,17 0,18 0,20 0,23 0,24 0,27 0,30 0,32 0,35
2 0,09 0,11 0,13 0,14 0,15 0,16 0,17 0,21 0,21 0,23 0,25 0,26 0,30 0,31 0,33 0,38 0,38 0,41
1 0,11 0,12 0,16 0,17 0,18 0,19 0,20 0,22 0,22 0,25 0,27 0,28 0,32 0,33 0,36 0,41 0,41 0,44
Radial infeed [mm]


Thread turning
External machining, UN 60°
Pitch [TPI]
No. of feeds 32 28 24 20 18 16 14 13 12 11 10 9 8 7 6 5
Total depth [mm] 0,52 0,62 0,71 0,83 0,93 1,03 1,17 1,26 1,36 1,48 1,63 1,79 2,01 2,28 2,66 3,19
16
15
14 0,10 0,10
13 0,11 0,12
12 0,08 0,08 0,12 0,15
11 0,08 0,11 0,11 0,13 0,17
10 0,08 0,11 0,12 0,12 0,14 0,18
9 0,08 0,11 0,12 0,12 0,14 0,15 0,19
8 0,08 0,08 0,08 0,11 0,12 0,12 0,13 0,15 0,16 0,19
7 0,08 0,10 0,11 0,12 0,12 0,13 0,13 0,14 0,16 0,17 0,20 A3
6 0,08 0,08 0,11 0,11 0,12 0,13 0,13 0,14 0,14 0,15 0,17 0,18 0,22
5 0,08 0,08 0,10 0,12 0,12 0,12 0,13 0,14 0,15 0,15 0,16 0,17 0,19 0,20 0,24
4 0,08 0,10 0,12 0,12 0,13 0,13 0,14 0,15 0,16 0,17 0,17 0,18 0,19 0,22 0,23 0,28
3 0,12 0,12 0,15 0,14 0,16 0,16 0,17 0,18 0,20 0,20 0,20 0,21 0,22 0,26 0,27 0,32
2 0,15 0,15 0,17 0,19 0,21 0,21 0,22 0,24 0,26 0,25 0,26 0,26 0,28 0,33 0,34 0,40
1 0,17 0,17 0,19 0,20 0,23 0,22 0,23 0,25 0,27 0,27 0,27 0,28 0,30 0,35 0,36 0,43
Radial infeed [mm]

Internal machining, UN 60°
Pitch [TPI]
No. of feeds 32 28 24 20 18 16 14 13 12 11 10 9 8 7 6 5
Total depth [mm] 0,49 0,59 0,66 0,78 0,86 0,95 1,10 1,17 1,26 1,38 1,49 1,66 1,86 2,11 2,44 2,93
16
15
14 0,10 0,10
13 0,11 0,12
12 0,08 0,08 0,11 0,14
11 0,08 0,10 0,11 0,12 0,14
10 0,08 0,09 0,10 0,12 0,12 0,15
9 0,08 0,10 0,10 0,11 0,12 0,13 0,16
8 0,08 0,08 0,08 0,10 0,10 0,11 0,11 0,13 0,14 0,17
9 0,08 0,09 0,10 0,10 0,11 0,11 0,12 0,12 0,14 0,15 0,18
6 0,08 0,08 0,09 0,10 0,11 0,11 0,12 0,12 0,13 0,13 0,15 0,16 0,20
5 0,08 0,08 0,09 0,10 0,10 0,11 0,12 0,13 0,13 0,13 0,14 0,15 0,17 0,18 0,22
4 0,08 0,10 0,10 0,11 0,12 0,12 0,13 0,13 0,15 0,15 0,15 0,16 0,17 0,20 0,20 0,25
3 0,10 0,10 0,14 0,13 0,14 0,14 0,15 0,16 0,18 0,18 0,18 0,19 0,21 0,23 0,24 0,30
2 0,14 0,14 0,16 0,17 0,19 0,20 0,21 0,22 0,24 0,24 0,25 0,26 0,28 0,28 0,32 0,38
1 0,17 0,17 0,18 0,20 0,23 0,22 0,23 0,25 0,27 0,27 0,27 0,28 0,30 0,34 0,35 0,42
Radial infeed [mm]


A 464
A – Turning catalogue A 4: General information – Turning
Page
Calculation formulae for turning A 466
Cutting forces of Walter machining groups A 467
Material comparison table A 468
Hardness comparison table A 490
ISO tolerances A 491
Clamping screws for indexable inserts A 492
Torque screwdriver with interchangeable blades A 493
Screwdriver A 494
Clamping systems for tools and tool adaptors A 495
A4
A 465
General information – Turning
Calculation formulae for turning
Speed
[rpm] vc
Dc
Cutting speed
lm
ap
Feed rate
Metal removal rate

Fc
Chip cross section
A4
Chip width, chip thickness
Main cutting force
Specific cutting force
n Speed rpm
Dc Cutting diameter mm
Power requirement vc Cutting speed m/min
vf Feed rate mm/min
f Feed per revolution mm
Q Metal removal rate cm3/min
ap Depth of cut mm
A Chip cross section mm2
Cutting time h Chip thickness mm
b Chip width mm
κ Lead angle °
Fc Main cutting force N
kc1.1* Specific cutting force N/mm2
for 1 mm2 chip cross section
Roughness profile depth mc* Increase in the kc curve
Pmot Power requirement kW
th Cutting time min
lm Machining length mm
lc Unrolled turning length m
Rmax Roughness profile depth μm
Unrolled turning length r Corner radius of the indexable insert mm
η Machine efficiency (0,75 – 0,9)
* For mc and kc1.1, see table on page A 467
A 466
Cutting forces of Walter machining groups
Tensile strength Spec. Walter

Increase
cutting machining
value
min max force group
Rm kc1.1 mc
Description [N/mm²] [N/mm²]
Non-alloyed and low-alloy steels, C > 0.25%,

350 750 1500 0,21 P1, P6
low and medium tensile strength
Non-alloyed and low-alloy steels, C > 0.55%, not heat-treated 400 900 1700 0,25 P2, P3, P4, P7, P14
Low and high-alloy steels, low heat treatment level 750 1100 2000 0,25 P5, P8, P11, P12
Stainless ferritic/martensitic steels, heat-treated 800 1400 2200 0,25 P15
Low and high-alloy steels, medium heat treatment level 1100 1400 2500 0,25 P9
Low and high-alloy steels, high heat treatment level 1200 1600 3000 0,25 P10, P13
Stainless, austenitic steels 400 900 1800 0,21 M1
Stainless, austenitic/ferritic steels + duplex 600 1000 2000 0,21 M3
Stainless, austenitic steels, precipitation hardened (PH steels) 700 1500 2400 0,21 M2
Grey cast iron + CGI + malleable cast iron, low tensile strength 200 400 800 0,28 K1, K3, K7
Ductile cast iron with low tensile strength + malleable cast iron
400 600 950 0,28 K2, K5
with higher tensile strength
Grey cast iron with higher tensile strength 300 400 1200 0,28 K4,
Ductile cast iron with high tensile strength + ADI high tensile strength,
600 800 1400 0,28 K6 A4
unalloyed + alloyed
Wrought aluminium alloy, not hardened 350 0,25 N1
Wrought aluminium alloy, hardened 600 0,25 N2
Cast aluminium alloy < 12% Si, not hardened 600 0,25 N3
Cast aluminium alloy < 12% Si, hardened,
700 0,25 N4, N5
cast aluminium alloy ≥ 12%
Pure copper, copper alloy (brass, bronze) with low tensile strength 550 0,25 N7, N8, N9
High tensile copper alloys, bronze with high tensile strength 1000 0,25 N10
Heat-resistant alloys, iron-based, annealed 2400 0,25 S1
Heat-resistant alloys, iron-based, hardened 2500 0,25 S2
Pure titanium 1300 0,25 S6
Titanium alloys, alpha, alpha/beta and beta alloys 1500 0,25 S7, S8
Heat-resistant alloys, nickel-cobalt-based, annealed 2800 0,25 S3
Heat-resistant alloys, nickel-cobalt-based, hardened 2900 0,25 S4
Heat-resistant alloys, nickel-cobalt-based, cast 3000 0,25 S5
Hardened steels 46 – 52 HRC 3000 0,25 H1
Hardened cast iron 50 – 60 HRC 3500 0,25 H4
Thermoplasts and thermosetting plastics, without abrasive fillers 150 0,2 O1, O2
Fibre-reinforced plastics 300 0,3 O3, O4, O5
Graphite 400 0,25 O6
Comments:
The information consists of standard values and refers to a neutral cutting edge geometry.
The condition of the material and of the cutting edge geometry considerably affects the cutting forces.
A 467
Material comparison table

Machining group
Material group
Germany
Mat. no. Mat. no. Manufacturer

DIN DIN EN DIN DIN EN designation
Building and construction steels
P1 1.0401 C 15 C15
P1 1.0402 C 22 C22
P2 1.0501 C 35 C35
P2 1.0503 C 45 C45
P4 1.0535 C 55 C55
P4 / P5 1.0601 C 60 C60
A4
P6 1.0715 9 SMn 28 11SMn30
P6 1.0718 9 SMnPb 28 11SMnPb30
P6 1.0722 10 SPb 20 10SPb20

P6 1.0726 35 S 20 35S20
P6 1.0736 9 SMn 36 11SMn37

P
P6 1.0737 9 SMnPb 36 11SMnPb37 Ledloy
P7 / P10 1.0904 55Si7
S340MGC,
P7 / P10 1.0961 60 SiCr 7
60SiCr7
P1 1.1141 Ck 15 C15E
P7 / H2 1.1157 40 Mn 4 40Mn4
P1 / P3 1.1158 Ck 25 C25E
P7 1.1167 36 Mn 5 36Mn5
P7 1.1170 28 Mn 6 28Mn6
P2 1.1183 Cf 35 C35G
P2 1.1191 Ck 45 C45E
P4 / P5 1.1203 Ck 55 C55E
A 468
Great Britain France Italy Sweden Spain Japan USA
AISI /
B.S. EN AFNOR UNI SS UNE JIS SAE
080M15,
C15,
144917CS, C18RR, S 15 C,
C16, 1350 F.111 J 409 grade 1015
040A15, XC18 JIS S 15C
1C15
080A15
040 A 15,
055 M 15, AF42C20, S 20 C,
2D, C20, 1C22,
En 2, 22 CS, XC25, 1450 S22C, 1020
2 C21 F112
22 HS, C 22, 1C22 JIS S 20C
070 M 20
080A32, 080A35, C35, 1C35, C35, 1572,
F.113 S 35 C 1035
080M36, 1449.40CS AF55C35 1C35 155
060A47, 080M46, 1C45, C45,
1650 F.114 JIS S 45C 1045
1449.50HS, 1449.50CS AF 65 C 45 1C45
C54,
070M55, C55,
9 1C55, 1655 F.115 S 55 C 1055
5770-50 1C55
AF 70 C 55
060A62, 5770-60, C60, 1C60, C60,
F.115 S 58 C 1060
1449 60HS.CS AF70C55 1C60 A4
F.2111 -
230M07 S250 CF9Mn28 1912 JIS SUM22 1213
11SMn28
12L13,
SUM22L,
F.2112 - 12L14,
S250Pb CF9SMnPb28 1914 SUM23L,
11SMnPb28 J 403 grade 12L14,
SUM24L
J 1397 grade 12L14
212M36 35MF6 1957 F.210G J 403 grade 1141

J 403 grade 1213,
F.2113 -
240M07 1B S300 CF9SMn36 SUM 25 J 403 grade 1215,
12 SMn 35
J 1392 grade 1213
F.2114 - J 403 grade 12L14,
S300Pb CF9SMnPb36 1926
12 SMnPb 35 J 1397 grade 12L14
250A53 45 55S7 2085 F.1440 - 56 Si 7 9255
250A61 60SC7 F.1442 - 60 SiCr 8 9262
040A15,
S 15,
080M15, F.1511 - C 16 k,
32C 1370 S 15 CK, 1015
S14, F.1110 - C 15 k
JIS S 15 C
CS17
1035,
150M36 15 35M5
1041
F.1120 - C 25 k, S 25 C,
070M26 2C25 1025
C25K (F1120) S 28 C
SMn 438 (H),
150M36 15 B 40M5 2120 F.1203 - 36 Mn5 1335
SCMn 3
150M28,
14A,
150M19, 20M5 C28Mn 28Mn6 SCMn1 1027
14B
S92
060A35, C36,
XC38H1TS S 35 C 1035
080A35 C38
C45RR,
080M46, XC42H1, F1140-C45k, S 45 C,
1672 1045
060A47 XC45, 2C45, F1142-C48k S 48 C
XC48, XC48H1
XC55H1,
060A57 9 2C55, 1655 F.1150 - C 55 k S 55 C 1055
XC54
A 469

Machining group
Material group
Germany

Building and construction steels (continued)
P2 / P3 1.1213 Cf 53 C53G
P4 / P5 1.1221 Ck 60 C60E
C101E,
P4 / H1 1.1274 Ck 101
C100S
P11 1.3401 X 120 Mn 12 X120Mn12
P7 / H2 1.3505 100 Cr 6 100Cr6
P7 1.5415 15 Mo 3 16Mo3
A4
P3 1.5423 16 Mo 5 16Mo5
P7 1.5622 14 Ni 6 14Ni6
P11 1.5662 X 8 Ni 9 X8Ni9
P P11 1.5680 12 Ni 19
X12Ni5,
12Ni19
P9 1.5710 36 NiCr 6 36NiCr6
P7 1.5732 14 NiCr 10 14NiCr10
P7 1.5752 14 NiCr 14 15NiCr13
P7 / P9 1.6511 36 CrNiMo 4 36CrNiMo4
P7 1.6523 20NiCrMo2-2 21NiCrMo2
40NiCrMo2-2,
P9 1.6546 40 NiCrMo 22
40NiCrMo2KD
P7 / P9 1.6582 34 CrNiMo 6 34CrNiMo6
17 CrNiMo 8,
17CrNiMo6,
P7 1.6587 17 CrNiMo 6,
18CrNiMo7-6
17 CrNiMo 6 BG
P7 1.6657 14 NiCrMo 134 14NiCrMo13-4
P7 1.7015 15 Cr 3 15Cr2KD
A 470
AISI /
060A52, 1050,
XC48H1TS S 50 C
070M55 1055
060A62, C60RR,
1665, F.511,
070M60, XC60, S 58 C 1060
168 F.512
CS60 2C60
C100RR,
060A96,
C100,
5770-95, 1870 SUP4 1095
XC100,
CS95
E 100
Z120M12, F.82551-AM-X 120 SCMnH1,
2183
Z120Mn12 Mn 12 SCMnH11
BL3,
534A99, Y100C6, F.5230 100 Cr6,
SUJ 2, L3,
535A99, 100C6, 100Cr6 2258 F.1310-100 Cr 6,
SUJ 4 52100
2S135, 100Cr6 F.131
S135
1501-240,
1503-243B, 15D3, ASTM A20,
16Mo3 (KG KW) 2912 F.2601-16 Mo 3
3606-243, 15Mo3 GR
3059-243
16Mo5KG, SB 450 M,
A4
1503-245-420 F.2602-16Mo5 4520
16Mo5KW SB 480 M
16N6,
14Ni6KG, ASTM A350
15N6, F.2641-15Ni6
14Ni6KT LF5
15Ni6
1501-509;510,
3603-509LT,
Z8N9, X10Ni9,
1502-502-650, F.2645-X8 Ni09 SL9N53(60) ASTM A353
9Ni490 X12Ni09
509-690,
1503-509-690
Z18N5, 2515,
5Ni390 2517
640A35 35NC6 SNC 236 3135
14NC11 16NiCr11 F.1540-15NiCr11 SNC 415 (H) 3415
14NC11,
655M13, SNC 815 (H), 3310,
36A, 12NC15,
655A12, SNC22, 3415,
36B 14NC12,
655H13 JIS SNC 815 9314
13NiCr14
40NCD3,
816M40 110 36CrNiMo4, 38NiCrMo7 (KB) F.1280-35NiCrMo4 9840
35NCD5
805H20,
20NCD2, F1552-20NiCrMo2, J 1268 grade 8620H,
805M20, 362 20NiCrMo2 2506 SNCM 220 (H)
22NCD2 F1534-20NiCrMo3 8620
806M20
F1204-40NiCrMo2,
311-Type7 40NCD2 40NiCrMo2 (KB) SNCM 240 8740
F1205-40NiCrMo2DF
35NCD6,
816M40, F1272-40NiCrMo7, SNCM 447,
24 34CrNiMo6, 35NiCrMo6KB 2541 4340
817M40 34CrNiMo6 JIS SNc M447
34CrNiMo8
F.1560-14 NiCrMo13,
820A16 18NCD6 18NiCrMo7
F.156
832H13,
F1560-14NiCrMo13,
832M13, 36C 16NCD13 15NiCrMo13
F.1569-14NiCrMo131
S157
12C3,
523M15 206 15Cr2, SCr 415 (H) 5132
18C3
A 471

Machining group
Material group
Germany

Building and construction steels (continued)
P7 / P8 1.7033 34 Cr 4 34Cr4
P7 / P9 1.7035 41 Cr 4 41Cr4
P9 1.7045 42 Cr 4 42Cr4
P7 1.7131 16 MnCr 5 16MnCr5
P7 / P9 1.7176 55 Cr 3 55Cr3
A4
P8 1.7218 25 CrMo 4 25CrMo4
P7 / P9 1.7220 34 CrMo 4 34CrMo4
P7 / P9 1.7223 41 CrMo 4 41CrMo4

P
P7 / P9 1.7225 42 CrMo 4 42CrMo4
P7 1.7262 15 CrMo 5 15CrMo5
P7 1.7335 13 CrMo 4 4 13CrMo4-5
P7 / P10 1.7361 32 CrMo 12 32CrMo12
P7 1.7380 10 CrMo 9 10 10CrMo9-10
P7 1.7715 14 MoV 6 3 14MoV6-3
P7 / P9 1.8159 50 CrV 4 51CrV4
P7 1.8509 41 CrAlMo 7 41CrAlMo7 Nitralloy 135
P7 / P10 1.8523 39 CrMoV 13 9 40CrMoV13-9
A 472
AISI /
530A32,
32C4, F.8221-35 Cr 4,
530H32, 34Cr4(KB) SCr 435 (H) 5132
34Cr4 F.224
530M32
38Cr4,
530M40,
42C4, 41Cr4, 38Cr41, SCR4,
530A40, 18 5140
41Cr4 41Cr4KB 42Cr4, SCr 440 (H)
530H40
F.1202-42Cr4
F1201,
SCR4,
42C4, F1202, 5140,
530A40 18 41Cr4 2245 SCr 440 (H),
42C4TS F1206, 5140H
SCr 440
F.1202-42Cr4
527M17, 16MC5,
2511, F.1515-16 MnCr5, J 1268 grade 4118H,
590H17, 16MC4, 16MnCr5
2173 F.151 C5115
590M17 16MnCr5
525A58,
55Cr3, F.1431-55 Cr3,
525A60, 48 55Cr3 2253 SUP 9 (A) 5155
55C3 F.143
525H60
F8372-AM26CrMo4, A4
SCM420,
1717CDS110, 25CD4, F8330-AM25CrMo4,
25CrMo4 (KB) 2225 SCM430, 4130
708A25 25CrMo4 F1256-30CrMo4-1,
SCCrM1
F.222
F8331-AM34CrMo4,
35CD4,
34CrMo4KB, F8231-34CrMo4, SCM 432, 4135,
34CrMo4,
708A37 19B 35CrMo4, 2234 F1250-35CrMo4, SCCrM 3, 4137,
35CD4 /
35CrMo4F F1254-35CrMo4DF, SCM 435 H J 1268 grade 4135H
34CrMo5
F.125
F8332-AM42CrMo4,
708M40, SCm 440,
42CD4TS 41CrMo4 F8232-42CrMo4, 4140
3111-5.1 JIS SCM 440
F1252-40CrMo4
708A42, 38CrMo4KB, F8332-AM42CrMo4, SCM 440 (H),
42CD4,
708M40, 19A 42CrMo4, 2244 F8232-42CrMo4, SNB 7, 4140
42CrMo4
709M40 G40CrMo4 F1252-40CrMo4 JIS SCM 440
12CD4 F.1551-12CrMo4 SCM 415 (H)
620-440,
1503-620-440,
1502,
15CD3.05, 14CrMo3, A387 grade 12Cl2,
620-470, 2216 F.2631-14CrMo45 SFVA F 12
15CD4.05 16CrMo3 ASTM A182
3606-620,
620-540,
3604-620-440
722M24 40B 30CD12 32CrMo12 2240 F.124.A
3059-622-490,
3606-622,
12CD9.10, 12CrMo9 (KW KG), SFVAF22A, A387 grade 22,
1502-622,
10CrMo9-10, G14CrMo9, 2218 TU.H BSCMV4, A387 grade 22Cl2,
3604-622,
10CrMo9-11 10 SCPH32-CF ASTM A182
622Gr.31,
622Gr.45
1503-660-460,
F.2621-13 MoCrV6
3604-660
50CV4,
735A50, 735A51,
47 51CrV4, 50CrV4 2230 F.1430-51CrV4 SUP 10 6150
735H51, 735M50
50CrV4
SACM 645,
905M39 41B 40CAD6.12 41CrAlMo7 2940 F.1740-41CrAlMo7 Nitralloy 135
JIS SACM 645
897M39 40C
A 473

Machining group
Material group
Germany

Stainless and heat-resistant steels
P14 / P15 1.4000 X 7 Cr 13 X6Cr13
P14 1.4001 X 7 Cr 14 X7Cr14
X 10 Cr 13, X12Cr13,
P14 / P15 1.4006
X 12 Cr 13 X10Cr13
P14 1.4016 X 6 Cr 17 X6Cr17
P15 1.4027 G-X 20 Cr 14 GX20Cr14
A4
P15 1.4034 X 46 Cr 13 X46Cr13
X19CrNi17-2,
P15 1.4057 X 20 CrNi 17 2
X17CrNi16-2
P14 / P15 1.4104 X 12 CrMoS 17 X14CrMoS17
P14 1.4113 X 6 CrMo 17 1 X6CrMo17-1
P15 1.4313 X 4 CrNi 13 4 X3CrNiMo13-4

P
P15 1.4718 X 45 CrSi 9 3 X45CrSi9-3-1
X 10 CrAl 13, X10CrAlSi13,
P14 1.4724
X 10 CrAlSi 13 X10CrAl13
X 10 CrAl 18, X10CrAl18,
P14 1.4742
X 10 CrAlSi 18 X10CrAlSi18
P15 1.4747 X 80 CrNiSi 20 X80CrNiSi20 Sil XB
X 10 CrAl 24, X10CrAl24,
P14 1.4762
X 10 CrAlSi 25 X10CrAlSi25
Tool steels
P4 1.1545 C 105 W 1 C105U
C125W,
P4 1.1663 C 125 W
C125U
99Cr6,
P7 / H2 1.2067 100 Cr 6
102Cr6
P11 / H3 1.2080 X 210 Cr 12 X210Cr12
P11 / H1 1.2344 X 40 CrMoV 5 1 X40CrMoV5-1
P11 / H3 1.2363 X 100 CrMoV 5 1 X100CrMoV5-1
107WCr5,
P7 / H2 1.2419 105 WCr 6 105WCr6,
100WCr6
A 474
AISI /
Z6013, SUS403,
403,
403S17 Z6Cr13, X6Cr13 2301 F.3110-X6 Cr13 SUS410S,
13/6
Z8C12 SUS429
SUS403, 403,
Z3014,
403S17 X6Cr13 F.8401-AM-X12 Cr13 SUS410S, 410S,
Z8C13FF
SUS429 429
410S21, Z12C13,
X12Cr13, SUS 410,
410C21, Z12Cr13, 2302 F.3401-X12 Cr13 410
X10Cr13 JIS SUS 410
ANC1A Z10C13
430S15,
Z8C17,
430S17, 60 X8Cr17 2320 F.3113-X8 Cr17 SUS 430 430
Z6Cr17
430S18
ANC1B,
ANC1C,
Z20C13M SCS 2
420C24,
420C29
Z40C14,
Z40Cr14,
A4
420S45 X40Cr14 F.3405-X46 Cr13 420
Z38C13M,
Z44C14
431S29, F.3427-X15 CrNi16,
SUS 431,
6S80, 57 Z15CN16.02 X16CrNi16 2321 F.313, 431
JIS SUS 431
S80 F3427-X19CrNi172
F3117-X10CrS17, SUS 431, 430F,
Z10CF17 X10CrS17 2383
F3413-X14CrMoS17 SUS430F J 405 grade 51435
434S17 Z8CD17.01 X8CrMo17 2325 F3116-X6CrMo171 SUS 434 434
Z5CN13.4,
425C11, Z4CND13.4M, SCS 5, CA6.
GX6CrNi13 04 2385
425C12 Z6CN13-4, SCS 6 13/4
Z8CD17-01
401S45 52 Z45CS9 X45CrSi8 F.3220-X 4 ScrSi 09-03 SUH 1 HNV3
Z10C13,
403S17 X10CrAl12 F.13152-X 10 CrAl13 405
Z13C13
Z10CAS18,
430S15 60 X8Cr17 F.3153-X 10 CrAl 18 SUH 21 430
Z12CAS18
443S65 59 Z80CSN20.02 F.3222-X 80CrSiNi20-02 SUH 4 HNV6
Z10CAS24,
X16Cr26 2322 F.3154-X 10 CrAl24 SUH 446 446
Z12CAS25
C105E2U, F515,
C100KU 1880 SK 3 (TC105) W110
Y1105 F516
Y2120 F.5123 C120 W112
100Cr6RR, F.5230 100 Cr6, L3,

BL3, SUJ 2,
100C6, 2258 F.1310 - 100 Cr6, 52100,
534A99 SUJ 4
Y100C6 F.131 L1
X200Cr12, SKD 1,
BD3 X205Cr12KU F.5212 X210 Cr12 D3
Z200C12 SKS
X40CrMoV5, H13,
BH13 X40CrMoV511KU 2242 F.5318 X40 CrMoV5 SKD 61
Z40CDV5 P20
X100CrMoV5, SKD 12, A2,
BA2 X100CrMoV51KU 2260 F.5227 X100 CrMoV5
Z100CDV5 JIS SKD 12 D2
SKS 2,
F.5233 105 WCr5,
105WC13 107WCr5KU 2140 SKS 3,
F.523
SKS 31
A 475

Machining group
Material group
Germany

Tool steels (continued)
X210CrW12-1,
P14 / H3 1.2436 X 210 CrW 12
X210CrW12
45WCrV8,
P7 / H2 1.2542 45 WCrV 7
45WCrV7
P11 / P13 1.2581 X 30 WCrV 9 3 X30WCrV9-3
P14 / H3 1.2601 X 165 CrMoV 12 X165CrMoV12

P7 / P10 /
1.2713 55 NiCrMoV 6 55NiCrMoV6
H1
P P7 / H3 1.2833 100 V 1 100V1
P11 / H3 1.3243 S 6-5-2-5 HS6-5-2-5

A4
P11 / H3 1.3255 S 18-1-2-5 HS18-1-2-5
P11 / H3 1.3343 S 6-5-2 HS6-5-2
P11 / H3 1.3348 S 2-9-2 HS2-9-2
P11 / H3 1.3355 S 18-0-1 HS18-0-1
Stainless and heat-resistant steels
M1 1.4301 X 5 CrNi 18 10 X5CrNi18-10
M1 1.4305 X 10 CrNiS 18 9 X8CrNiS18-9
M1 1.4306 X 2 CrNi 19 11 X2CrNi19-11
M M1 1.4308 G-X 6 CrNi 18 9 GX5CrNi19-10
X9CrNi18-8,
M2 1.4310 X 12 CrNi 17 7
X10CrNi18-8
M1 1.4311 X 2 CrNiN 18 10 X2CrNiN18-10
X5CrNiMo17-12-2,
M1 1.4401 X 5 CrNiMo 17 12 2 X4CrNiMo17-12-2,
X5CrNiMo18-10
A 476
AISI /
X210CrW12-1,
F.5213 X210 CrW12,
Z210CW12-01, X215CrW121KU 2312 D6
F.521
Z 210 CW 12
F.5241 45 WCrSi 8,
45WCrV8,
BS1 45WCrV8KU 2710 F.524, S1
45WCrV20
F524145WCrSi 8
X30WCrV9,
BH21 X30WCrV93KU F.5323 X30 WCrV9 SKD 5 O1, H21
Z30WCV9
X165CrMoW12KU 2310 F.5211 X160 CrMoV12
F.528,
BH224 L6
F520S
C105E2UV1,
BW2 Y1105V, 102V2KU SKS 43 W210
100V2
Z85WDKCV06-
05-05-04-02,
BM35 HS6-5-2-5 2723 F.5613 6-5-2-5 SKH 55 S7, M35
Z90WDKCV06- A4
05-05-04-02
Z80WKCV18-
BT4 HS18-1-1-5 F.5530 18-1-1-5 SKH 3 T4
05-04-01
Z85WDCV06-
BM2 HS6-5-2-5 2722 F.5603 6-5-2 SKH 51 M2
05-04-02
Z100DCWV09-
HS2-9-2 2782 F.5607 2-9-2 M7
04-02-02
BT1 Z80WCV18-04-01 HS18-0-1 F.5520 18-0-1 SKH 2 T1
304S15, 304S16, Z4CN19-10FF, F.3451-X5 CrNi18-10,

304S31, 304S11, Z5CN17-08, 2332, F.314, 304,
58E X5CrNi18 10 SUS 304
304S17, LW21, Z6CN18-09, 233 F.3504-X6CrNi19 10, 304H
LWCF21 Z7CN18-09 F3504-X5CrNi1810
303S21,
Z10CNF18.09, SUS 303, J 405 grade 30303,
303S22, 58M X10CrNiS18 09 2346 F.3508-X10CrNiS18-09
Z8CNF18-09 JIS SUS 303 303
303S31
304S11,
Z1CN18-12,
LW20,
Z2CN18-10,
LWCF20, X3CrNi18 11,
Z3CN19.10M, F.3503-X 2CrNi19-10, JIS SCS 19,
S536, X2CrNi18 11, 2352 304L
Z3CN18-10, F3503-X 2CrNi18-10 JIS SUS 304L
T74, GX2CrNi19 10
Z3CN19-11,
304C12 (LT196),
Z3CN19-11FF
305S11
304C15,
Z6CN18.10M SCS 13
304C15 (LT196)
Z12CN17.07,
301S21, Z12CN18.07,
301S22, Z11CN17-08, X12CrNi17 07 2331 F.3517-X12CrNi17 07 SUS 301 301
302S26 Z11CN18-08,
Z12CN18-09
Z3CN18-07Az,
304S62 X2CrNiN18 11 2371 F3541-X2CrNiN1810 SUS 304 LN 304LN
Z3CN18-10AZ
Z6CND17.11,
Z3CD17-11-01, F.3543-X5CrNiMo17-12,
316S13, 316S17,
Z6CND17-11, F.3543-X6 CrNiMo17-
316S19, 316S31, X5CrNiMo17 12 2347 SUS 316 316
Z6CND17-11-02FF, 12-03,
316S33, 316S16
Z7CND17-11-02, F3543-X5CrNiMo17-122
Z7CND17-12-02
A 477

Machining group
Material group
Germany

Stainless and heat-resistant steels (continued)
M1 1.4408 G-X 6 CrNiMo 18 10 GX5CrNiMo19-11-2
M1 1.4429 X 2 CrNiMoN 17 13 3 X2CrNiMoN17-13-3
X 2 CrNiMo 18 14 3,
M1 1.4435 X2CrNiMo18-14-3
X 2 CrNiMo 18 12
M1 1.4438 X 2 CrNiMo 18 16 4 X2CrNiMo18-15-4
M1 1.4460 X 4 CrNiMoN 27 5 2 X3CrNiMoN27-5-2
A4 M1 1.4541 X 6 CrNiTi 18 10 X6CrNiTi18-10
M1 1.4550 X 6 CrNiNb 18 10 X6CrNiNb18-10
M
M1 1.4571 X 6 CrNiMoTi 17 12 2 X6CrNiMoTi17-12-2
DIN 1.4565,
M1 G-X 5 CrNiMiNb 18 10 GX5CrNiMoNb19-11-2
1.4581
M1 1.4583 X 10 CrNiMoNb 18 12 X10CrNiMoNb18-12
M1 1.4828 X 15 CrNiSi 20 12 X15CrNiSi20-12
M2 1.4871 X 53 CrMnNiN 21 9 X53CrMnNiN21-9
X12CrNiTi18-9,
M1 1.4878 X 12 CrNiTi 18 9
X10CrNiTi18-10
Heat-resistant alloys, Fe-based
M1 1.4558 X 2 NiCrAlTi 32 20 X2NiCrAlTi32-20

M1 1.4563 X 1 NiCrMoCu 31 27 4 X1NiCrMoCu31-27-4
X12NiCrSi36-16,
M1 1.4864 X 12 NiCrSi 36 16 Incoloy DS
X12NiCrSi35-16
M1 1.4958 X 5 NiCrAlTi31-20 X5NiCrAlTi31-20

M1 1.4977 X 40 CoCrNi 20 20
A 478
AISI/
316C16,
F.8414-AM-X7
316C16 (LT196), SCS 14
CrNiMo20 10
ANC4B
316S62, F3543-
Z2CND17.13Az X2CrNiMoN17 13 2375 SUS 316 LN 316LN
316S63 X2CrNiMoN17133
316S11, 316S13, F.3533-X2 CrNiMo 17-
Z2CND17.13,
316S14, 316S31, 12-03,
Z3CND17-12-03, X2CrNiMo17 13 2353 316L
LW22, LWCF22, F.3534-X6 CrNiMo 17-
Z3CND18-14-03
316S12 12-03
Z2CND19.15,
317S12 Z2CND19-15-04, X2CrNiMo18 16 2367 F3539-X2CrNiMo18164 SUS 317 L 317L
Z3CND19-15-04
Z3CND25-07Az, F3309-X8CrNiMo27-05,
2324 SUS 329 J1 329
Z5CND27-05Az F3552-X8CrNiMo266
F.3553-X7 CrNiTi
321S12, 321S31, 18-11,
321,
321S51 (1010, 1105) 58B, F.3523-X 6 CrNiTi SUS 321,
LW24, 58C
Z6CNT18.10 X6CrNiTi18 11 2337
18-11, JIS SUS 321
15/5 PH, A4
17/4 PH
LWCF24 09 Ch 18N10T,
F3523-X6CrNiTi1810
F.3552-X 7 CrNiNb
18-11, 347,
347S20, 347S31, 58F, X6CrNiNb18 11,
Z6CNNb18.10 2338 F.3524-X 67 CrNiNb SUS 347 13/8 MO
347S51, ANC3B 58G X8CrNiNb18 11
18-11,
F3524-X6CrNiNb1810
F.3552-X 6
320S31,
CrNiMoTi17-12-03, 316Ti,
320S17, 58J Z6CNDT17.12 X6CrNiMoTi17 12 2350 SUS 316 Ti
F3535- 326Ti
320S18
X6CrNiMoTi17122
318C17,
Z4CNDNb18.12M GX6crNiMoNb20 11 SCS 22 Nitronic 50.60
ANC4C
X6CrNiMoNb17 13
Z15CNS20.12,
309S24 Z17CNS20-12, X16CrNi23 14 F3312-X15CrNiSi20-12 SUH 309 309
Z9CN24-13
Z52CMN21.09,
F.3217-X53 CrMnNiN SUH 35, EV8,
349S54 Z53CMNS21-09Az, X53CrMnNiN21 9
21-09 SUH 36 2205 Duplex
Z53CMN21-09Az
321S20, 58B, T6CNT18.12 (B),
2337 F.3523-X 6CrNiTi 18 11 SUS 321 321
321S51 58C Z6CNT18-10
N08800 Incoloy 800

N08028 Alloy 28
Z12NCS37.18,
NA17 Z12NCS35.16, F.3313-X12 CrNi 36-16 SUH 330 N08830 Alloy 330
Z20NCS33-16
Z 42 CNKDWNb
A 479

Machining group
Material group
Germany

Grey cast iron
GG-10,
K3 0.6010 EN-JL1010 EN-GJL-100
GG 10
GG-15,
K3 0.6015 EN-JL1020 EN-GJL-150
GG 15
GG-20,
K3 0.6020 EN-JL1030 EN-GJL-200
GG 20
GG-25,
K3 0.6025 EN-JL1040 EN-GJL-250
GG 25
GG-30,
K4 0.6030 EN-JL1050 EN-GJL-300
GG 30
GG-35,
K4 0.6035 EN-JL1060 EN-GJL-350
GG 35
GG-40,
K4 0.6040 EN-GJL-400
GG 40
K4 0.6660 GGL-NiCr 20 2
GG-26Cr,
K4 EN-GJL-260 Cr
GG 26Cr
A4 K7 GGV 45 EN-GJV-450
Ductile cast iron
K5 0.7040 EN-JS1030 GGG-40 EN-GJS-400-15
K K6 0.7050 EN-JS1050 GGG-50 EN-GJS-500-7
EN-JS1060, EN-GJS-600-3,
K6 0.7060 GGG-60
EN-JS 1092 EN-GJS-600-3U
EN-JS1070, EN-GJS-700-2,
K6 0.7070 GGG-70
EN-JS 1102 EN-GJS-700-2U
Malleable cast iron
GTW-35, GTW-35-04,
K1 0.8035 EN-JM 1010
GTW-35-04 EN-GJMW-350-4
GTW-40-05, EN-GJMW-400-5,
K1 0.8040 EN-JM 1030
GTW-40 GTW-40-05
GTW-45-07,
K1 0.8045 EN-JM 1040 EN-GJMW-450-7
GTW-45
GTS-35-10,
K1 0.8135 EN-JM 1130 EN-GJMB 350-10
GTS-35
GTS-45-06, EN-GJMB 450-6,
K1 0.8145 EN-JM 1140
GTS-45 GTS-45-06
GTS-55-04, EN-GJMB 550-4,
K1 0.8155 EN-JM 1160
GTS-55 GTS-55-04
GTS 65-02, EN-GJMB 650-2,
K2 0.8165 EN-JM 1180
GTS-65 GTS-65-02
GTS 70-02, EN-GJMB 700-2,
K2 0.8170 EN-JM 1190
GTS-70 GTS-70-02
A 480
AISI /
Ft10D, FC 100,
G10 0110 FG 10 ASTM A-48-76
FGL100 FC10
Ft15D,
Grade 150 G15 0115 FG 15 FC 150 NO 20B
FGL150
Ft20D, FC 200,
Grade 220 G20 0120 FG 20 NO 30B
FGL200 FC20
Ft25D, FC25,
Grade 260 G25 0125 FG 25 NO 35B
FGL250 FC 250
Ft30D,
Grade 300 G30 0130 FG 30 FC 300 NO 40B
FGL300
Ft35D,
Grade 350 G35 0135 FG 35 FC 350 NO 55B
FGL350
Ft40D,
Grade 400 0140
FGL400
L-NiCr20 2 L-NC 20 2 0523
A4
FCD 400,
420 / 12 FGS 400-12 GS400-12 0717 60/40/18
FCD40
FCD 500,
500 / 7 FGS 500-7 GS500-7 0727 70/50/05
FCD50
FCD 600,
600 / 3 FGS 600-3 GS600-3 0732 80/55/06
FCD60
FCD 700, 100/70/03
700 / 2 FGS 700-2 GS700-2 0737
FCD70 120/90/02
W 35-04 MB 35-7 FCMW 330
W 410 / 4 MB 40-10 FCMW 350
45-07 MB 45-7 FCMWP 440
B 340 / 12 MN 35-10 0815 FCMB 340 32510
P 440 / 7,
MP 50-5 0854 40010
P 45-06
P 540 / 5,
MP 60-3 0856 50005
P 55-04
P 65-02 0862 60004
P 70-02 MP 70-2 0862 70003
A 481

Machining group
Material group
Germany

Aluminium alloys
N1 3.0255 EN AW-1050A Al99.5 Al99.5
N4 3.1371 EN AC-21000 G-AlCu4TiMg G-AlCu4TiMg

N2 3.1655 EN AW-2011 AlCuBiPb AlCu6BiPb
AlCu4Mg1.5Ni2,
N2 3.1734 Y-Alloy
WL 3.1734
G-AlSi7Mg,
N4 3.2371 EN AC-42100 G-AlSi7Mg
AlSi7Mg
G-AlSi9Mg,
N4 3.2373 EN AC-43300 G-AlSi9Mg
AlSi9Mg
G-AlSi10Mg,
N4 3.2381 EN AC-43000 G-AlSi10Mg
AlSi10Mg
N4 3.2382 EN AC-43400 GD-AlSi10Mg AlSi10Mg(Fe)
G-AlSi10MgCu,
N4 3.2383 EN AC-43200 G-AlSi10MgCu
AlSi10Mg (Cu)
A4 N3 3.2581 EN AC-44200 G-AlSi12
G-AlSi12,
AlSi12
GD-AlSi12,
N3 3.2582 EN AC-44300 GD-AlSi12
AlSi12 (Fe)
N3 3.2583 EN AC-47000 G-AlSi12 (Cu) G-AlSi12 (Cu)
N2 3.3315 EN AW-5005A AlMg1 AlMg1C
N3 3.3561 EN AC-51300 G-AlMg5 G-AlMg5
N2 3.4345 EN AW-7022 AlZnMgCu0.5 AlZnMgCu0.5

N4 DIN 3.3211
N
N4 DIN 3.4365
Copper alloys
Medium red tombac,

N7 2.0240 CW502L CuZn15 CuZn15
Gold tombac
Half tombac,
Soldered brass,
N7 2.0265 CW505L CuZn30 CuZn30 Cartridge brass,
Polished copper,
Metarsic
Pressed brass,
Etching quality,
N7 2.0321 CW508L CuZn37 CuZn37 Tuned brass,
Soft brass,
Stamped brass
G-CuZn35Al1,
N7 2.0592 CC765S GK-CuZn35Al1, CuZn35Mn2Al1Fe1-C
GZ-CuZn35Al1
G-CuZn34Al2,
N7 2.0596 CC764S GK-CuZn34Al2, CuZn34Mn3Al2Fe1-C
GZ-CuZn34Al2
N7 2.0966 CW307G CuAl10Ni5Fe4 CuAl10Ni5Fe4
G-CuAl11Ni,
N7 2.0975 CC333G G-CuAl11Ni
G-CuAl10Ni
N7 2.1050 CC480K G-CuSn10Zn CuSn10-C
A 482
AISI /
A1x1,
1B A5 4507 4007 L-3051 1050A
A1050
A-U5GT L-2140 AC1B B26
FC1 A-U5PbBi 6362 4355 L-3182 A2011 2011
LM14 A-U4NT 3045 L-2150 AC5A
2L99, AC4C,
A-S7G0.3 7257 4244 L-2651 B25
LM25 JIS AC4 CH (AL 9)
AC4A,
A7-S10G 3051 4253 A13560
JIS AC4 A (AL 4)
L-2560,
LM9 A-S10G 3051 4253 JIS AC4 A (AL 4V) A13600
L-2561
L-2560,
LM9 A-S10G 3051 4253 AC4A
L-2561
A-S9GU JIS ADC3 (AL 4) A360.2
LM6 A-S13 4514 4261

L-2520,
AC3A A413.2 A4
L-2521
LM6, A-S13, 4514, L-2520,
4261 AC3A A413.0
LM20 A-S12 G-AlSi13 21
ADC1 (AK 12),
LM20 A-S12U 3048 4260 L-2530 413.1
AC3A (AL 12)
A-G0, A2x8,
N41 5764 4106 L-3350 5005A
6 A5005
N6, 5056A,
A-G6 3058 4146 L-3320 JIS AC7A (AL28)
LM5 514.1
A-Z5GU0.6
6061-T6
7075-T6
CZ 102 CuZn15 C2300 C23000
CZ 106 CuZn30 C2600 C26000
CZ 108 CuZn37 C2720 C27400
HTB 1 C86500
C86200
CuAl9Ni5Fe3Mn,
CA 104 C63000
U-A10N
AB2 CuAl11Ni5Fe G-CuAl11Fe4Ni4 B-148-52
G1,
C90700
CT1
A 483

Machining group
Material group
Germany

Copper alloys (continued)
G-CuSn12,
N7 2.1052 CC483K GZ-CuSn12, CuSn12-C
GC-CuSn12
G-CuSn7ZnPb,
N9 2.1090 CC493K GZ-CuSn7ZnPb, CuSn7Zn4Pb7-C Rotguss 7
GC-CuSn7ZnPb
N9 2.1096 CC491K G-CuSn5ZnPb CuSn5Zn5Pb5-C Rotguss 5
N9 2.1098 CC490K G-CuSn2ZnPb CuSn3Zn8Pb5-C Alloy 5A
G-CuPb10Sn,
N9 2.1176 CC495K GZ-CuPb10Sn, CuSn10Pb10-C
GC-CuPb10Sn
G-CuPb15Sn,
N9 2.1182 CC496K GZ-CuPb15Sn, CuSn7Pb15-C
GC-CuPb15Sn
N9 2.1188 CC497K G-CuPb20Sn CuSn5Pb20-C
N7 2.1293 CW106C CuCrZr CuCr1Zr
A4
N7 CuAl6.5Fe2.5Sn0.25 AMPCO 8
N7 AMPCO 6
N10 CuAl13Fe4.5 AMPCO 21
N10 AMPCO 26
Magnesium-based alloys
N
EN-MCMgZn4RE1Zr,
N6 3.5101 EN-MC35110 G-MgZn 4 SE 1 Zr 1
G-MgZn4SE1Zr1
EN-MCMgRE3Zn2Zr,
N6 3.5103 EN-MC65120 G-MgSE 3 Zn 2 Zr 1
G-MgSE3Zn2Zr1
EN-MCMgRE2Ag2Zr,
N6 3.5106 EN-MC65210 G-MgAg 3 SE 2 Zr 1
G-MgAg3SE2Zr1
MgZn6Zr, MgZn6Zr,
N6 3.5161
MgZn 6 Zr F 29 MgZn6Zr F29
N6 3.5200 MgMn2 MgMn2
N6 3.5312 MgAl3Zn MgAl3Zn
N6 3.5470 EN-MC21320 MgAl4Si1 EN-MCMgAl4Si
N6 3.5612 MgAl6Zn MgAl6Zn
N6 3.5632 EN-MC21150 G-MgAl 6 Zn 3 G-MgAl6Zn3 AZ63

N6 3.5662 G-MgAl 6 G-MgAl6
N6 3.5812 EN-MC21110 G-MgAl 8 Zn 1 G-MgAl8Zn1 AZ81 hp
N6 3.5912 EN-MC21120 GD-MgAl 9 Zn 1 GD-MgAl9Zn1 AZ91
A 484
AISI /
A53-707, Amcoloy 712,

Pb2
CuSn12 B505
CuSn7Pb6Zn4 C93200
LG2 CuPb5Sn5Zn5 C83600

LG1
LB2 CuPb10Sn10 C93700
LB1 C93800
LB5 CuPb20Sn5 C94100

CC 102 CuCrZr C18200
A4
AMPCO 8
AMPCO 6
AMPCO 21
AMPCO 26
RZ5, MAG5,
G-Z4TR, ZH62 ZE41
MAG9, TZ6
ZRE1, MAG6 G-TR3Z2 EZ33
MSR, QE22 G-Ag2, 5 QE22
ZW1, ZW3,
ZW6, ZW21,
M1
MAG 161, MAG 131,
MAG 141, MAG 151
MAG 101, AM503 G-M2
G-A3Z1, 52,
AZ31, MAG 111
AZ31 510
G-A4S1
G-A6Z1, 520,
MAG121, AZM
AZ61 531
AZ63
MAG1, MAG2,
G-A9,
AZ80, AZ81, AZ81 hp AZ81 hp AZ81
AZ81
A8
AZ91, MAG3, G-A9Z1,
AZ91 hp HK31
MAG7 AZ91
A 485

Machining group
Material group
Germany

Titanium and titanium alloys
S6 3.7025 Ti 1 Ti 99.8 Titanium grade 1

S7 3.7115.1 TiAl 5 Sn 2 TiAl5Sn2.5
S6 3.7124 TiCu2 TiCu2
3.7164,
S7 TiAl 6 V 4 TiAl6V4 Titanium grade 5
3.7165
Ni/Co-based heat-resistant alloys
S3 2.4360 NiCu30Fe NiCu30 Monel 400
S S4 2.4375 NiCu30Al NiCu30Al3Ti Monel K500
A4 S3 2.4630 NiCr20Ti Nimonic 75
Inconel 690,
S3 2.4642 NiCr30Fe
Alloy 690
NiCr19Fe19NbMo,
Inconel 718,
S4 2.4668 NiCr19Fe19Nb5Mo3, NiCr19Nb5Mo3
Udimet 630
NiCr19NbMo
NiCr15Fe7TiAl, Inconel X-750,
S4 2.4669 NiCr15Fe7Ti2Al
Alloy X-750 Alloy X-750
NiCr22Mo9Nb,
S3 2.4856 NiCr22Mo9Nb Inconel 625
Alloy 625
NiCr21Mo,
S3 2.4858 NiFe30Cr21Mo3 Incoloy 825
Alloy 825
S4 DIN 2.4698
S4 DIN 2.4654
Hardened cast iron
H4 0.9640 G-X300CrMoNi1521 GX300CrMoNi15-2-1
H4 0.9645 G-X260CrMoNi2021 GX260CrMoNi20-2-1

H4 0.9650 G-X260Cr27 GX260Cr27
H4 0.9655 G-X300CrMo271 GX300CrMo27-1
Chilled cast iron
H H4 0.9620 G-X260NiCr42 GX260NiCr42 Ni hard 2
H4 0.9625 G-X330NiCr42 GX330NiCr42 Ni hard 1
H4 0.9630 G-X300CrNiSi952 GX300CrNiSi952 Ni hard 4
H4 0.9635 G-X300CrMo153 GX300CrMo15-3
A 486
AISI /
TA.1 T-35 Ti-PO1 R2050

R54620
TA.21, TA.22, TA.23,
TA.24, TA.52, TA.53, T-U2 Ti-P11
TA.54, TA.55, TA.58
4911, 4928,
TA.10, TA.11,
4935, 4954,
TA.12, TA.13, T-A6V Ti-P63
4965, 4967,
TA.28, TA.56
6AL4V
3072-76,
NU30 Monel 400
NA13
3072-76, HC202, AMS 4676,
3146, Na18 Monel K500
HR5, 703 B,
NC 20 T
Nitronic 75, A4
203-4 Nimonic 90/120
Inconel 690
HR 8 NC 19 FeNb Inconel 718
5542G,
HR 505 NC 15 FeTNb
Inconel X-750
NC 22 FeDNB Incoloy 825
3072-76 NC 21 FeDU
Hastelloy C
Waspaloy
Grade 3A, grade 3B

BS4844
Grade 3C
Grade 3D 0466 A532111A 25% CR
Grade 3E A532111A 25% CR
Grade 2A,
0512 Ni hard 2
BS4844 (1986) 2A
Grade 2B,
0513 Ni hard 1
BS4844 (1986) 2B
Grade 2C, Grade 2D,
Grade 2E, 0457 Ni hard 4
BS4844 (1986) 2E
Grade 3A; B,
Grade 3B
A 487

Machining group
Material group
Germany

Thermosetting plastics
EP,
O2 Epoxide,
Epoxy
O2 Bakelite
O2 Pertinax
O2 Resitex
Thermoplastics
PMMA,
O O1
Polymethyl metacrylate,
Plexiglas,
Acrylic glass
PC,
O1 Polycarbonate,
Makrolon
A4
PA,
O1
Polyacrylamide
A 488
AISI /
Epoxy,
Bakelite
Phenolic
Phenolic w/glass
Resitex
Plexiglas,
Acrylic,
Polycarbonate
UHMW
Acetal plastics, A4
Delrin,
Celcon,
Teflon,
Nylon
A 489
Hardness comparison table

Tensile strength, Brinell, Vickers and Rockwell hardness (extract from DIN 50150)
Tensile Vickers Brinell Rockwell Tensile Vickers Brinell Rockwell
strength hardness hardness hardness strength hardness hardness hardness
Rm Rm
N/mm2 HV HB HRC N/mm2 HV HB HRC
255 80 76,0 1420 440 418 44,5
270 85 80,7 1455 450 428 45,3
285 90 85,5 1485 460 437 46,1
305 95 90,2 1520 470 447 46,9
320 100 95,0 1555 480 (456) 47,7
335 105 99,8 1595 490 (466) 48,4
350 110 105 1630 500 (475) 49,1
370 115 109 1665 510 (485) 49,8
385 120 114 1700 520 (494) 50,5
400 125 119 1740 530 (504) 51,1
415 130 124 1775 540 (513) 51,7
430 135 128 1810 550 (523) 52,3
450 140 133 1845 560 (532) 53,0
465 145 138 1880 570 (542) 53,6
480 150 143 1920 580 (551) 54,1
495 155 147 1955 590 (561) 54,7
510 160 152 1995 600 (570) 55,2
530 165 156 2030 610 (580) 55,7
545 170 162 2070 620 (589) 56,3
560 175 166 2105 630 (599) 56,8
575 180 171 2145 640 (608) 57,3
595 185 176 2180 650 (618) 57,8
610 190 181 660 58,3
625 195 185 670 58,8
A4 640 200 190 680 59,2
660 205 195 690 59,7
675 210 199 700 60,1
690 215 204 720 61,0
705 220 209 740 61,8
720 225 214 760 62,5
740 230 219 780 63,3
755 235 223 800 64,0
770 240 228 20,3 820 64,7
785 245 233 21,3 840 65,3
800 250 238 22,2 860 65,9
820 255 242 23,1 880 66,4
835 260 247 24,0 900 67,0
850 265 252 24,8 920 67,5
865 270 257 25,6 940 68,0
880 275 261 26,4 Any hardness values converted on the basis of this table will be approximate only.
900 280 266 27,1 See DIN 50150.
915 285 271 27,8 Values in brackets are theoretically calculated values.
930 290 276 28,5
950 295 280 29,2
965 300 285 29,8
995 310 295 31,0
1030 320 304 32,2 Material Unit/ Symbol
1060 330 314 33,3 property test method
1095 340 323 34,4
1125 350 333 35,5
Tensile strength N/mm2 Rm
1155 360 342 36,6
1190 370 352 37,7
1220 380 361 38,8 Diamond pyramid 136°
1255 390 371 39,8 Vickers hardness HV
Testing force F ≥ 98 N
1290 400 380 40,8
1320 410 390 41,8 Brinell hardness 0.102 × F/D2 = 30 N/mm2
1350 420 399 42,7 Calculated from: F = testing force in N HB
1385 430 409 43,6 HB = 0.95 × HV D = sphere diameter in mm
Diamond cone 120°

Rockwell hardness C HRC
Overall testing force 1471 ± 9 N
A 490
ISO tolerances
Nominal Tolerances* for external dimensions

size range
in mm d11 e7 e8 h5 h6 h7 h8 h9 h10 h11 h12 js14 js16 k6 k10 k11 k12 m7 p7
–20 –14 –14 0 0 0 0 0 0 0 0 +125 +300 +6 +40 +60 +100 +12 +16
>3
–80 –24 –28 –4 –6 –10 –14 –25 –40 –60 –100 –125 –300 0 0 0 0 +2 +6
>3 –30 –20 –20 0 0 0 0 0 0 0 0 +150 +375 +9 +48 +75 +120 +16 +24
≤6 –105 –32 –38 –5 –8 –12 –18 –30 –48 –75 –120 –150 –375 +1 0 0 0 +4 +12
>6 –40 –25 –25 0 0 0 0 0 0 0 0 +180 +450 +10 +58 +90 +150 +21 +30
≤ 10 –130 –40 –47 –6 –9 –15 –22 –36 –58 –90 –150 –180 –450 +1 0 0 0 +6 +15
> 10 –50 –32 –32 0 0 0 0 0 0 0 0 +215 +550 +12 +70 +110 +180 +25 +36
≤ 18 –160 –50 –59 –8 –11 –18 –27 –43 –70 –110 –180 –215 –550 +1 0 0 0 +7 +18
> 18 –65 –40 –40 0 0 0 0 0 0 0 0 +260 +650 +15 +84 +130 +210 +29 +43
≤ 30 –195 –61 –73 –9 –13 –21 –33 –52 –84 –130 –210 –260 –650 +2 0 0 0 +8 +22
> 30 –80 –60 –50 0 0 0 0 0 0 0 0 +310 +800 +18 +100 +160 +250 +34 +51
≤ 50 –240 –75 –89 –11 –16 –25 –39 –62 –100 –160 –250 –310 –800 +2 0 0 0 +9 +26
> 50 –100 –80 –60 0 0 0 0 0 0 0 0 +370 +950 +21 +120 +190 +300 +41 +62
≤ 80 –290 –90 –106 –13 –19 –30 –46 –74 –120 –190 –300 –370 –950 +2 0 0 0 +11 +32
> 80 –120 –72 –72 0 0 0 0 0 0 0 0 +435 +1100 +25 +140 +220 +350 +48 +72
≤ 120 –340 –107 –126 –15 –22 –35 –54 –87 –140 –220 –350 –435 –1100 +3 0 0 0 +13 +37
> 120 –145 –86 –85 0 0 0 0 0 0 0 0 +500 +1250 +28 +160 +250 +400 +55 +83
≤ 180 –395 –125 –148 –18 –25 –40 –63 –100 –160 –250 –400 –500 –1250 +3 0 0 0 +15 +43
> 180 –170 –100 –100 0 0 0 0 0 0 0 0 +575 +1450 +33 +185 +290 +460 +63 +96
≤ 250 –460 –148 –172 –20 –29 –46 –72 –115 –185 –290 –460 –575 –1450 +4 0 0 0 +17 +50
> 250 –110 +108
≤ 315 –162 +56
> 315 –125 +119
≤ 400 –182 +52
> 400
≤ 500
–135
–198
+131
+53
A4
Nominal Tolerances* for external dimensions Nominal Tolerances* for internal dimensions
size range size range
in mm z9 in mm H6 H7 H11 H12
+51 +6 +10 +60 +0,10
>3 >3
+26 0 0 0 0
>3 +65 >3 +8 +12 +75 +0,12
≤6 +35 ≤6 0 0 0 0
>6 +78
>6 +9 +15 +90 +0,15
≤ 10 +42
≤ 10 0 0 0 0
> 10 +93
≤ 14 +50 > 10 +11 +18 +110 +0,18
≤ 18 0 0 0 0
> 14 +103
≤ 18 +60 > 18 +13 +21 +130 +0,21
≤ 30 0 0 0 0
> 18 +125
≤ 24 +73 > 30 +16 +25 +160 +0,25
> 24 +140 ≤ 50 0 0 0 0
≤ 30 +88 > 50 +19 +30 +190 +0,30
> 30 +174 ≤ 80 0 0 0 0
≤ 40 +112 > 80 +22 +35 +220 +0,35
> 40 +196 ≤ 120 0 0 0 0
≤ 50 +136
> 120 +25 +40 +250 +0,40
> 50 +246 ≤ 180 0 0 0 0
≤ 65 +172
> 180 +29 +46 +290 +0,46
> 65 +284 ≤ 250 0 0 0 0
≤ 80 +210
* Tolerances in μm in accordance with DIN ISO 286
> 80 +345
(previously: DIN 7160 or DIN 7161)
≤ 100 +258
> 100 +397
≤ 120 +310
> 120 +465
≤ 140 +365
> 140 +515
≤ 160 +415
> 160 +565
≤ 180 +465
> 180 +635
≤ 200 +520
A 491
Clamping screws for indexable inserts
Tightening Tightening
torque torque
Screw types Designation Dimensions Torx Nm Screw types Designation Dimensions Torx Nm
FS322 M2,5 × 5,7 7 0,8 FS1358 M1,8 × 3,5 6 0,4
FS258 M3 × 5,7 8 1,5 FS1012 M1,8 × 4,3 6 0,4
FS246 M3 × 7 8 1,5 FS2076 M2 × 3,2 6IP 0,6
FS1163 M3,5 × 10 15 3,0 FS1003 M2 × 3,25 6 0,4
Clamping screws
FS320 M4 × 5 15 3,0 Clamping FS1151 M2 × 3,45 6 0,4
with 43° head
FS318 M4 × 6 15 3,0 screws with 60° FS2147 M2 × 4,25 6IP 0,6
angle for index-
FS245 M4 × 6,5 15 3,0 head angle for FS2148 M2 × 4,95 6IP 0,6
able inserts with
FS321 M4 × 7 15 3,0 indexable inserts FS1004 M2,2 × 4,6 7 0,6
countersink
FS319 M4 × 8 15 3,0 with arched FS2084 M2,2 × 4,6 7IP 0,9
countersink
FS244 M4 × 9 15 3,0 FS2111 M2,2 × 4,85 7IP 0,9
in accordance
FS749 M4 × 10,5 15 3,0 FS1020 M2,2 × 5,5 7 0,6
with ISO
FS326 M4 × 12 15 3,0 FS2149 M2,2 × 6,4 7IP 0,9
FS1458 M4 × 12 15IP 2,5 FS2066 M2,5 × 5,2 7IP 0,9
FS954 M4,5 × 11 20 4,5 FS924 M2,5 × 4,5 8 0,8
FS260 M5 × 9,5 20 5,0 FS1455 M2,5 × 4,5 8IP 0,8 / 1,2
FS243 M5 × 11 20 5,0 FS1129 M2,5 × 5,2 8 0,8
FS242 M5 × 13 20 5,0 FS2067 M2,5 × 5,7 7IP 0,9
FS1165 M5 × 12 20 6,0 FS375 M2,5 × 5,8 7 0,8
FS1010 M6 × 14 20 5,0 FS923 M2,5 × 6 8 0,8 / 1,2
FS1164 M6 × 15 25 10,0 FS1454 M2,5 × 6 8IP 0,8 / 1,2
FS925 M2,5 × 6,5 8 0,8 FS2061 M2,5 × 6,5 7IP 0,9
FS397 M3 × 6,9 8 1,0 FS2077 M3 × 5,3 9IP 1,5
FS2070 M3 × 6,5 8IP 2,0 FS1005 M3 × 6 8 1,0
FS922 M3,5 × 9,5 15 2,5 FS1456 M3 × 6,2 9IP 1,5 / 2,0
Fitting screws
A4 FS390 M4 × 0,5 × 8,4 15 4,0 FS2078 M3 × 7,2 9IP 1,5
FS2071 M4 × 8,4 15IP 4,0 FS1013 M3 × 7,5 8 1,0
FS1028 M4,5 × 12,8 20 4,0 FS1457 M3 × 7,7 9IP 1,5
FS1153 M4,5 × 14 20 4,0 FS379 M3 × 8,5 8 1,0
FS391 M5 × 0,5 × 9,1 20 5,0 FS2079 M3 × 8,7 9IP 2,0
FS392 M5 × 0,5 × 12,75 20 5,0 FS920 M3,5 × 7,3 15 2,5
FS393 M5 × 0,5 × 15,45 20 5,0 FS2062 M3,5 × 8,1 15IP 3,0
FS2072 M5 × 9,55 20IP 5,0 FS2266 M3,5 × 8,75 10IP 2,0
FS2073 M5 × 0,5 × 12,75 20IP 5,0 FS359 M3,5 × 9 15 2,5
FS2074 M5 × 15,45 20IP 5,0 FS2119 M3,5 × 9,3 15IP 3,0
FS2075 M6 × 20,35 20IP 5,0 FS2063 M3,5 × 10,1 15IP 3,0
FS394 M6 × 0,7 × 20,35 20 5,0 FS1006 M3,5 × 12 15 2,5
FS395 M8 × 0,75 × 24,7 30 6,0 FS2060 M3,5 × 12,1 15IP 3,0
FS2107 M8 × 24,7 30IP 10,0 FS2279 M3,5 × 12 15IP 3,0
FS2064 M4 × 0,5 × 11 15IP 3,0
FS2065 M4 × 0,5 × 14 15IP 3,0
FS1011 M4 × 7,8 15 3,0
FS2080 M4 × 8,5 15IP 2,5
FS2114 M4 × 9 15IP 2,5
FS378 M4 × 9,5 15 3,0
FS1453 M4 × 9,7 15IP 2,5 / 3,5
FS1459* M4 × 10 15IP 4,0
FS2163 M4 × 10,8 15IP 3,0
FS2081 M4 × 12 15IP 3,0
FS1007 M4 × 12 15 3,0
FS1029 M5 × 9 20 5,0
FS2139 M5 × 10 20IP 5,0
FS1030 M5 × 11 20 5,0
FS2281 M5 × 11 20IP 5,0
FS1495 M5 × 13 20IP 5,0
FS1031 M5 × 13 20 5,0
FS1009 M5 × 16 20 5,0
FS2112 M5 × 16 20IP 5,0
FS2090 M5 × 17,25 20IP 5,0
FS1036 M6 × 14 20 5,0
FS2089 M6 × 18,25 25IP 5,0
FS1008 M6 × 18 20 5,0
FS1152 M8 × 1 × 18,5 30 10,0
FS2150 M8 × 22 30IP 10,0
* Screw head with radius IP = Torx Plus
A 492
Torque screwdriver with interchangeable blades
Torque screwdriver
Designation Size Scale range Interchangeable blades Designation Torx
FS2001 1 4 0,4–1,2 Nm FS2005 6 4

FS2003 3 4 1,5–5,0 Nm Torx interchangeable blades FS2006 7
Blade length 175 mm
FS2002 1 4 3,5–10,6 in lbs FS2007 8
FS2004 3 4 13,3–44 in lbs FS2008 10
FS2009 15
FS2010 20
FS2085 6IP 4
Torx Plus interchangeable blades FS2011 7IP
Blade length 175 mm
FS2012 8IP
FS2013 9IP
FS2268 10IP
FS2014 15IP
Designation Size Scale range
FS2015 20IP
A4
FS2248 3 4 1,0–6,0 Nm FS2016 25IP
Complete blade set FS2017 4

(FS2005–FS2016)
Blade length 175 mm
IP = Torx Plus
Torque T-handle
Interchangeable blades Designation Torx/SW
FS2043 15 6
Torx interchangeable blades FS2044 20

Blade length 130 mm
FS2045 25
FS2046 30
FS2047 15IP 6
Torx Plus interchangeable blades FS2048 20IP

Blade length 130 mm
FS2049 25IP
FS2109 30IP
FS2050 SW3 6
Designation Scale range Hexagonal interchangeable blades FS2051 SW4
Blade length 130 mm
FS2041 6 4,5–14 Nm FS2052 SW5
Complete blade set FS2053 6

(FS2043–FS2052)
FS2042 6 40–123 in lbs
Blade length 130 mm
IP = Torx Plus
A 493
Screwdriver
Screwdriver types Designation Torx Screwdriver types Designation Torx WAF

FS1063 6 FS2146 6IP –
FS2086 6IP FS2087 6IP –
FS309 7 FS325 7 –
Screwdriver FS2088 7IP Torx key FS1490 7IP –
FS230 8 FS257 8 –
FS1483 8IP FS1466 9IP –
FS1128 9 FS1050 10 –
FS1484 9IP FS255 15 –
FS2267 10IP FS1465 15IP 3,5
FS229 15 FS1496 15IP 4,0
FS1485 15IP FS256 20 –
FS228 20 FS1154 – 2,0
FS1486 20IP FS1155 – 2,5
FS2167 25
FS1487 25IP
FS396 30
FS2109 30IP
IP = Torx Plus IP = Torx Plus
Screwdriver types Designation Torx Allen key Designation Torx WAF

A4
FS1047 15 ISO 2936–1,3 – 1,3
FS1048 20 ISO 2936–1,5 – 1,5
FS1049 25 ISO 2936–2 – 2
Handle key, small
ISO 2936–2,5 – 2,5
ISO 2936–3 – 3
FS1172 15 ISO 2936–3,5 – 3,5
FS1173 20 ISO 2936–4 – 4
FS1174 25 ISO 2936–5 – 5
FS1175 30 ISO 2936–6 – 6
Handle key, large
FS1464 20IP –
FS1592 25IP –
IP = Torx Plus
A 494
Clamping systems for tools and tool adaptors
Walter Capto™ tool adaptor

d11 l2 l5
ISO 26623 Walter Capto™ mm mm mm d13
l2 l5 C3 32 15 19 M12 × 1,5
C4 40 20 24 M14 × 1,5
C5 50 20 30 M16 × 1,5
C6 63 22 38 M20 × 2,0
d13
d11
C8 80 30 48 M20 × 2,0
HSK tool adaptor

l5 d4 dx max. l2 lx min.
DIN 69893 part 1, form A HSK mm mm mm d13 mm mm
63 32 63 53 M18 × 1,0 26 42
100 50 100 85 M24 × 1,5 29 45
d13
d4 dX
l2
lx l5 A4
l5 l2 l15 d4 b h1 h2
SK tool adaptor
SK –0,3 –0,1 ± 0,2 d9 –0,1 H12 –0,4 –0,4
DIN 69871 part 1, form A no. mm mm mm mm d13 mm mm mm mm
l5 40 68,4 15,9 3,2 44,45 M16 63,55 16,1 22,8 25,0
50 101,75 15,9 3,2 69,85 M24 97,50 25,7 35,5 37,7

h2
d9
d13
h1
9''
8°17'4
b
l2 l15
d4
SK tool adaptor
SK l5 d4 d8 max. h2 h1
DIN 69871 part 1, form B no. mm mm mm d13 mm mm
40 68,40 63,55 50 M16 22,8 25,0
60° l5
50 101,75 97,50 80 M24 35,5 37,7
h1
d4 d8 d13
h2
15,9 3,2
35
(with internal coolant supply; dimensions similar to form A)
A 495
Clamping systems for tools and tool adaptors

(continued)
l15 d4 l2 b h
SK tool adaptor
SK d9 l5 ± 0,2 –0,4 ± 0,15 H12 max.
DIN 2080 no. mm mm mm d13 mm mm mm mm
l5 40 44,45 93,4 1,6 M16 63,0 10 16,1 45,0
50 69,85 126,8 3,2 M24 97,5 12 25,7 70,6

d9
d13
h
9''
l15
8°17'4
b
l2 d4
CAT tool adaptor

SK l5 d4 d8 h2 h1
ANSI B 5.50 no. mm mm mm d13 mm mm
40 68,25 63,5 44,5 M16 22,6 25,0

60°
l5
50 101,6 98,4 70,0 M24 35,3 37,7
h1
d4 d8 d13
h2
15,87 3,18
35
A4 (ANSI/ASME B 5.50 – 1885)
MAS BT tool adaptor

SK l5 d4 l2 l15
no. mm mm d13 mm mm
l5 40 65,4 63 M16 25 2
60°
50 101,8 100 M24 35 3
d4 d13
l15
l2
MT tool adaptor
d9 l5 l15
DIN 228 A MT mm mm mm α d13
0 9,045 53 3,0 1˚29’27” –

d9
1 12,065 57 3,5 1˚25’43” M6

d13
2 17,780 69 5,0 1˚25’50” M10

α
3 23,825 86 5,0 1˚26’16” M12

l15
l5
4 31,267 109 6,5 1˚29’15” M16
5 44,399 136 6,5 1˚30’26” M20
A 496
SW
MT tool adaptor
d9 l5 l15 d4 f b d9
DIN 2207 MT mm mm mm mm mm mm mm
DIN 228 3 23,825 86 5,0 36 18 12 24

SW
4 31,267 109 6,5 43 23 15 32
5 44,399 136 6,5 60 28 18 45

d9
d4
l15
b
f l5
VDI tool adaptor

d1 d2 l5
DIN 69880 Type mm mm mm
VDI 16 16 8 32
VDI 20 20 10 40
d1 VDI 25 25 10 48
VDI 30 30 14 55
d2
VDI 40 40 14 63
l5 VDI 50 50 16 78
A4
d11 d4 h l5
Parallel shank
h6 min. h13 ±1 e b
ISO 9766:1990 (E) mm mm mm mm mm mm
l5 20 25 18,2 50 14,5 29
b 25 31 23 56 17,5 35
32 38 30 60 19,5 39
d11
d4
R 0,8 max e h
A 497
A 498
Walter General Catalogue Contents
Page
A – Turning catalogue A2
A 1: ISO turning A4
A 2: Grooving A 269
A 3: Thread turning A 421
A 4: General information – Turning A 465
B – Drilling and Threading catalogue B 2 and B 706
Drilling B 1: Solid drilling B4
B 2: Counterboring and precision boring B 494
B 3: Reaming B 651
B 4: General information – Drilling B 695
Threading B 5: Tapping B 708
B 6: Thread forming B 1023
B 7: Thread milling B 1083
B 8: Threading dies B 1135
B 9: General information – Threading B 1143
C – Milling catalogue C2
C 1: Solid carbide, PCD and HSS milling tools C4
C 2: Milling tools with indexable inserts C 274
C 3: General information – Milling C 667
D 1: Stationary adaptors D3
D 2: Rotating adaptors D 50
D 3: General information – Adaptors D 159
B1
Drilling
Tools for drilling
The Walter and Walter Titex competence brands provide a full range of products for efficient
drilling operations. The standard range of solid drills starts at a diameter of 0.05 mm and ends at
a diameter of 100 mm. A wide range of systems with indexable inserts or drill inserts as well as
systems made from solid carbide or HSS is available.
In addition to analogue tools, digital solutions with balance compensation are available for counter-
boring and precision boring operations. Maximum precision and easy handling increase process
reliability and productivity. For reaming operations, Walter offers solid carbide or HSS tools with
multiple cutting edges, as well as various versions of pad-guided reaming tools with exchangeable
cutting edges.
1 XD Technology 5 Solid carbide and HSS centre drill

[from page B 101] [from page B 396]
– Drilling without pecking up to 50 × Dc – Our product range includes dimensions
as a standard tool and up to 70 × Dc as in accordance with DIN 333 and the
a special tool associated forms A, R and B
– For versatile use in many different
materials
2 Xtra·tec® Point Drill

[from page B 198]
– Solid drilling tool with drill insert for all
drilled holes up to 10 × Dc
– Patented clamping provides maximum
process reliability
3 UFL® XPL high-performance drill 4 X·treme solid carbide chamfer drill

made from HSS-E [from page B 27]
[from page B 262] – Pilot hole drilling and countersinking
– UFL® XPL tools offer a long tool life for can be performed in a single operation
universal use – Other dimensions and stages can be
– HSS-E provides good temperature supplied by the Walter Xpress Service
resistance and the XPL coating ensures within two weeks
maximum wear resistance
B2
Drilling
6 DC170 Supreme – The ikon of drilling

[from page B 28]
– Innovative new guidance design for maximum performance
and component quality
– Reliable thanks to 360° coolant coverage
– Visible cost-effectiveness thanks to the regrinding scale
7 Walter Precision
[from page B 554]
– Self-balancing precision boring tool for final boring
operations
– Accuracy of 2 μm with vc at up to 2000 m/min
– Walter Capto™, NCT and ScrewFit adaptor
– Also available in a lightweight version
8 Xtra·tec® Insert Drill

[from page B 214]
– Indexable insert drill which can be used universally for high
productivity with excellent drilled hole quality
9 Walter Boring
[from page B 536]
– Boring tool with a wide adjustment range
– With Walter NCT, Walter Capto™ and ScrewFit, it is
compatible with almost any machine spindle
10 X·treme D8–D12
[from page B 79]
– High-performance drill up to 12 × Dc with DPP
double point coating for maximum process reliability
and maximum productivity
– No centring or pilot holes required
11 Walter Titex reaming

[from page B 660]
– Our comprehensive reaming product range made from
solid carbide and HSS includes cylindrical and tapered
versions
– 1/100 increments available from stock
12 D4580 + A3382XPL chamfering tool

[from page B 170]
– Xtra·tec®
– Can be used with various solid carbide drills
B3
B1
B – Drilling catalogue B 1: Solid drilling
Page
Solid carbide drilling tools Product range overview B6
Designation key B 10
Walter Select – Solid carbide drilling tools B 12
Solid carbide drills with internal coolant B 27
Solid carbide drills without internal coolant B 123
Drilling/chamfering tools Product range overview B 170
Tools and indexable inserts B 172
Indexable inserts for drilling Product range overview B 174

and reaming
Walter Select – Indexable inserts/solid drilling B 178
Indexable inserts for drilling B 180
Indexable inserts for reaming B 190
Drilling tools Product range overview B 192

with indexable inserts
Walter Select – Drilling tools with indexable inserts B 194
Indexable insert drills B 198
HSS drilling tools Product range overview B 248
Walter Select – HSS drilling tools B 252
HSS drills B 262
Solid carbide and HSS NC centre drills Product range overview B 375
Walter Select – Solid carbide and HSS NC centre drills B 376
Solid carbide and HSS NC centre drills B 380
B4
B1
B – Drilling catalogue B 1: Solid drilling
Page
Solid carbide and HSS centre drills Product range overview B 389
Walter Select – Solid carbide and HSS centre drills B 390
Solid carbide and HSS centre drills B 396
Technical information – Cutting data B 412

Solid carbide drilling tools
Cutting tool materials and coatings B 430
Grade description B 432
Type description B 434
Drilling strategies B 438
Dimensions for solid carbide drilling tools B 441
Technical information –
Assembly instructions B 443
Drilling/chamfering tool
Drilling tools
with indexable inserts Cutting tool material application charts B 456
Geometry overview – Indexable inserts B 457
Tool diameter tolerance ranges B 458
Drilling with X offset B 459
Drilling strategies B 460
Standard values for cooling, performance, torque and feed force B 461
Solutions B 470

HSS drilling tools
Cutting tool materials, surface treatment and coatings B 482
Dimensions for HSS drilling tools B 484
Cutting data B 487
Solid carbide and HSS NC centre drills
Cutting data B 488
Solid carbide and HSS centre drills
B5
Solid drilling
B1
Product range overview

Solid carbide drills with internal coolant
Machining
Drilling depth 3 × Dc 3 × Dc 5 × Dc
Designation K3299XPL DC170 A3289DPL A3293TTP A3299XPL DC150 DC170 A3389AML A3389DPL
K3899XPL Supreme X·treme X·treme A3899XPL Perform Supreme X·treme X·treme
X·treme Plus Inox X·treme M Plus
Step 90
Standard Walter DIN 6537 K DIN 6537 K DIN 6537 K DIN 6537 K DIN 6537 K DIN 6537 L Walter DIN 6537 L
Dia. range [mm] 3,3–14 3–20 3–20 3–20 3–20 3–20 3–20 2–2,95 3–20
Page B 27 B 28 B 31 B 34 B 37 B 43 B 47 B 50 B 51
Machining
Drilling depth 5 × Dc 8 × Dc
Designation A3393TTP A3382XPL A3399XPL A3387 DC150 DC170 A6489AMP A6488TML A6489DPP
X·treme X·treme A3999XPL Alpha® Jet Perform Supreme X·treme Alpha® 4 X·treme
Inox CI X·treme DM8 Plus Micro D8
Standard DIN 6537 L DIN 6537 L DIN 6537 L DIN 6537 L DIN 6537 L Walter Walter Walter Walter
Dia. range [mm] 3–20 3–20 3–25 4–20 3–20 3–20 2–2,95 0,75–1,984 3–20
Page B 54 B 57 B 60 B 67 B 68 B 74 B 77 B 78 B 79
Machining
Designation A6493TTP A3487 A3486TIP DC150 DC170 A6589AMP A6588TML A6589DPP A3687
X·treme Alpha® Jet A3586TIP Perform Supreme X·treme Alpha® 4 X·treme Alpha® Jet
Inox Alpha® 44 DM12 Plus Micro D12
Standard Walter Walter Walter Walter Walter Walter Walter Walter Walter
Dia. range [mm] 3–16 5–20 5–12 3–20 3–20 2–2,9 1–1,9 3–20 5–20
Page B 82 B 84 B 85 B 86 B 89 B 92 B 93 B 94 B 97
B6 Solid carbide drilling and reaming tools

Solid drilling
B1

Machining
Drilling depth 12 × Dc 16 × Dc 20 × Dc 25 × Dc
Designation DC150 DC170 A6689AMP A6685TFP DC170 A6789AMP A6794TFP A6785TFP DC170
Perform Supreme X·treme Alpha® 4 Supreme X·treme X·treme Alpha® 4 Supreme
DM16 XD16 DM20 DH20 XD20
Dia. range [mm] 3–20 3–16 2–2,9 3–16 3–16 2–2,9 3–10 3–16 3–12
Page B 98 B 101 B 102 B 103 B 104 B 105 B 106 B 107 B 108
Machining
Drilling depth 25 × Dc 30 × Dc 40 × Dc 50 × Dc 2 × Dc
Designation A6889AMP A6885TFP DC170 A6989AMP A6994TFP A6985TFP A7495TTP A7595TTP K3281TFT
X·treme Alpha® 4 Supreme X·treme X·treme Alpha® 4 X·treme X·treme X·treme Pilot
DM25 XD25 DM30 DH30 XD30 D40 D50 Step 90
Dia. range [mm] 2–2,9 3–12 3–12 2–2,9 3–10 3–12 3–11 3–9 3–16
Page B 109 B 110 B 111 B 112 B 113 B 114 B 115 B 116 B 117
Machining
Designation A6181AML A6181TFT A7191TFT K5191TFT

X·treme XD Pilot X·treme X·treme
Pilot 150 Pilot 180 Pilot 180 C
Standard Walter Walter Walter Walter
Dia. range [mm] 2–2,95 3–16 3–20 4–7
Page B 118 B 119 B 120 B 122
Solid carbide drilling and reaming tools B7

Solid drilling
B1

Solid carbide drills without internal coolant
Machining
Designation K3879XPL A3279XPL A1164TIN A1163 A1166TIN A1166 A1167A A1167B DC150
X·treme A3879XPL Alpha® 2 Perform
Step 90 X·treme
Standard Walter DIN 6537 K DIN 6539 DIN 6539 Walter Walter Walter Walter DIN 6537 K
Dia. range [mm] 3,3–14,5 3–20 1,5–20 1–12 3–20 3–20 3–20 3–20 3–20
Page B 123 B 124 B 130 B 134 B 136 B 136 B 139 B 142 B 145
Machining
Designation DB133 A3162 A3379XPL A3367 DB133 A1276TFL A1263

Supreme A3979XPL A3967 Supreme Alpha® 22
X·treme BSX
Standard Walter DIN 1899 DIN 6537 L DIN 6537 L Walter DIN 338 DIN 338
Dia. range [mm] 0,5–2,95 0,1–1,45 3–25 3–16 0,5–2,95 3–12 0,6–12
Page B 150 B 152 B 154 B 161 B 164 B 166 B 167
B8 Solid carbide drilling and reaming tools

B9
Solid drilling
B1
Designation key – Solid carbide drilling tools
Example
A 3 3 99 XPL
1 2 3 4 5
1 2 3
Tool type Shank shape Length in accordance with DIN or Walter standard
A Twist drills 1 Cylindrical 1 DIN 6539 6 Walter standard 16 × Dc
K Chamfer drills/ 3 Cylindrical 2 DIN 338 / 6537 K 7 Walter standard 20 × Dc

conical drills
6 XD drill ≤ 30 × Dc 3 DIN 6537 L 8 Walter standard 25 × Dc/
DIN 6537 K
7 XD drill > 30 × Dc 4 Walter standard 8 × Dc/40 × Dc
9 Walter standard 30 × Dc/
5 Walter standard 12 × Dc/50 × Dc DIN 6537 L
4 5
Tool type Coating
62 Type ESU 79 X·treme without internal coolant 89 X·treme D8 and D12 AML AlTiN micro coating
63 Type N 81 XD Pilot 89 X·treme M and DM8 . . . 30 AMP AlTiN micro point coating
64 ®
Alpha 2 85 ®
Alpha 4 XD16 . . . 30 94 X·treme DH20 and DH30 DPL Double coating
66 Countersinks 86 Alpha® 44 95 X·treme D40 and D50 DPP Double point coating
67 Countersinks 87 Alpha® Jet 99 X·treme with internal coolant XPL AlCrN coating
(wide flutes/BSX)
88 ®
Alpha 4 Plus Micro TFT Tinal® TOP coating
74 NC centre drills
89 X·treme Plus TTP Tinal® TOP point coating
76 Alpha® 22
TFP Tinal® point coating
TiN TiN coating
TIP TiN point coating
TML Tinal® micro coating
B 10 Solid carbide drilling and reaming tools

Solid drilling
B1
Example
D C 1 70 – 16 – 03.000 A 1 – W J 30 EJ
1 2 3 4 5 6 7 8 9 Grade
1 2 3 4 5
Tool group Generation Tool type Tool type 1. Delimiters
D Drilling 1 Cylindrical drill 33 Micro drill – Metric
50 Universal . Inches
70 ISO P; ISO K
6 7 8 9
Drilling depth Cutting diameter Shank type Cooling
03 ≈ 3 × Dc in accordance 16 ≈ 16 × Dc in accordance A DIN 6535 HA 0 External cooling

with DIN 6537 short with Walter standard parallel shank
1 Axial internal coolant
05 ≈ 5 × Dc in accordance 20 ≈ 20 × Dc in accordance F DIN 6535 HE
with DIN 6537 long with Walter standard parallel shank
or in accordance with
Walter standard 25 ≈ 25 × Dc in accordance
with Walter standard
08 ≈ 8 × Dc in accordance
with Walter standard 30 ≈ 30 × Dc in accordance
12 ≈ 12 × Dc in accordance
Grade designation key 1 2 3

for cutting tool materials made Substrate Range of applications Coating
from solid carbide and HSS
Wear
resistance EJ TiAlN (AlCrN)
5
10 RE TiAlN
W J 30 EJ
Solid carbide
15
20
TA TiAlN
25 EL AlCrN
J 30
Walter 1 2 3 35 ER AlCrN point coating
40
45
50
55
60
65
70
HSS
75
80
85
90
95
Toughness
Solid carbide drilling and reaming tools B 11

Solid drilling
B1
Walter Select – Solid carbide drilling tools

Step by step to the right tool
STEP 1
Code Machining
page B 1174 onwards:
All types of steel and steel casting,
Note the machining group that corresponds P P1–P15 Steel with the exception of steel with an austenitic
structure
to your material, e.g.: K5.


vermicular graphite

Materials with difficult Heat-resistant special alloys based on iron,

S S1–S10
cutting properties nickel and cobalt, titanium and titanium alloys

chilled cast iron

O O1–O6 Other
plastics, graphite

Solid drilling
B1
STEP 2 Walter Select

Select your tool from the table
– with internal coolant from page B 14 onwards Machining
– without internal coolant from page B 24

onwards
– In accordance with the drilling depth

or standard (e.g. 3 × Dc or DIN 6537 L)
– For the relevant machining group
(see step 1: P1–P15; M1–M3; …; O1–O6)
Designation K3299XPL DC170 Supreme A3289DPL A3293TTP A3299XPL

K3899XPL X·treme Plus X·treme Inox A3899XPL
X·treme Step 90 X·treme
Standard Walter DIN 6537 K DIN 6537 K DIN 6537 K DIN 6537 K
Coating/grade XPL WJ30EJ DPL TTP XPL
Shank DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA
DIN 6535 HE DIN 6535 HE
Di r [ ] 3 3 14 3 20 3 20 3 20 3 20
STEP 3 Cutting data

Select your cutting data from the table
from page B 412 onwards: = Wet machining (E = emulsion, O = oil)
Drilling depth
Designation K3299XPL
3 × Dc
DC170 Supreme
K3899XPL
= Dry machining is possible (M = MQL, L = dry) X·treme Step 90
The cutting data must be selected from Walter GPS
Standard Walter DIN 6537 K
– Cutting speed: vc
VRR
= Cutting speed
= Feed rating chart from page B 429 onwards
Coating/grade XPL WJ30EJ
vc; VCRR (vc rating chart for micro) VCRR = vc rating chart from page B 428 onwards Dia. range [mm] 3,3–14 3–20
Page B 27 B 28
– Feed: VRR (feed rating chart) * The classification of the machining groups can be found in the material group comparison table
Go to the row for your machining group

(e.g. K5) and the column for your selected
Tensile strength Rm
Brinell hardness HB
Machining group *
drilling and reaming tool. You will find

Material group
the cutting speed vc or the VCRR and VRR

N/mm2
Overview of the main material groups and code letters vc VRR vc VRR
there. C ≤ 0.25% Annealed 125 430 P1 140 10 EO 200 16 EO M
EO EO
You can find the vc rating chart (VCRR) Non-alloyed steel
C > 0.25... ≤ 0.55%
C > 0.25... ≤ 0.55%
Annealed
Heat-treated
190
210
640
710
P2
P3
120
120
12
12 EO
180
180
12
12 EO
M
M
C > 0.55% Annealed 190 640 P4 120 9 EO 180 12 EO M
and the feed rating chart (VRR) from page C > 0.55% Heat-treated 300 1010 P5 100 9 EO 140 12 EO M
Free cutting steel (short-chipping) Annealed 220 750 P6 140 12 EO 200 16 EO M
B 428 onwards. Annealed 175 590 P7 140 10 EO 180 12 EO M
P Low-alloyed steel
Heat-treated 285 960 P8 90 9 EO 120 16 EO M
Annealed 200 680 P11 90 9 EO 140 9 EO M
High-alloyed steel and high-alloyed tool steel Hardened and tempered 300 1010 P12 100 9 EO 140 12 EO M
Hardened and tempered 380 1280 P13 45 7 EO 56 8 EO M
Ferritic/martensitic, annealed 200 680 P14 110 12 EO 160 12 EO M
Stainless steel

Solid drilling
B1
Walter Select
Machining
Designation K3299XPL DC170 Supreme A3289DPL A3293TTP A3299XPL

K3899XPL X·treme Plus X·treme Inox A3899XPL
X·treme Step 90 X·treme
Standard Walter DIN 6537 K DIN 6537 K DIN 6537 K DIN 6537 K
Coating/grade XPL WJ30EJ DPL TTP XPL
Dia. range [mm] 3,3–14 3–20 3–20 3–20 3–20
Page B 27 B 28 B 31 B 34 B 37
P Steel CC CC CC C CC
M Stainless steel C CC CC C
K Cast iron CC CC CC CC
N NF metals CC CC C CC
S Materials with difficult cutting properties CC CC CC CC
H Hard materials C C CC C
O Other C C C C

Solid drilling
B1
3 × Dc 5 × Dc 5 × Dc 5 × Dc
DC150 Perform DC170 Supreme A3389AML A3389DPL A3393TTP A3382XPL A3399XPL

X·treme M X·treme Plus X·treme Inox X·treme CI A3999XPL
X·treme
DIN 6537 K DIN 6537 L Walter DIN 6537 L DIN 6537 L DIN 6537 L DIN 6537 L
WJ30RE WJ30EJ AML DPL TTP XPL XPL
DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA
3–20 3–20 2–2,95 3–20 3–20 3–20 3–25
B 43 B 47 B 50 B 51 B 54 B 57 B 60
CC CC CC CC C CC
C CC CC CC C
CC CC CC CC CC CC
CC CC CC C C CC
CC CC CC CC CC
C C C CC C
C C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Designation A3387 DC150 Perform DC170 Supreme A6489AMP A6488TML

Alpha® Jet X·treme DM8 Alpha® 4 Plus Micro
Standard DIN 6537 L DIN 6537 L Walter Walter Walter

Coating/grade Uncoated WJ30RE WJ30EJ AMP TML
DIN 6535 HE
Dia. range [mm] 4–20 3–20 3–20 2–2,95 0,75–1,984
Page B 67 B 68 B 74 B 77 B 78
P Steel CC CC CC CC
M Stainless steel C CC CC
K Cast iron C CC CC CC CC
N NF metals C CC CC CC
S Materials with difficult cutting properties CC CC CC
H Hard materials C C C C
O Other C C C CC

Solid drilling
B1
8 × Dc 8 × Dc 8 × Dc 8 × Dc 12 × Dc 12 × Dc
A6489DPP A6493TTP A3487 A3486TIP DC150 Perform DC170 Supreme A6589AMP

X·treme D8 X·treme Inox Alpha® Jet A3586TIP X·treme DM12
Alpha® 44
Walter Walter Walter Walter Walter Walter Walter
DPP TTP Uncoated TIP WJ30TA WJ30EJ AMP
DIN 6535 HE
3–20 3–16 5–20 5–12 3–20 3–20 2–2,9
B 79 B 82 B 84 B 85 B 86 B 89 B 92
CC C CC CC CC CC
CC CC C C CC
CC C C CC CC CC
CC C C CC CC CC
CC CC C CC CC
CC C C C
C C C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Designation A6588TML A6589DPP A3687 DC150 Perform DC170 Supreme

Alpha® 4 Plus Micro X·treme D12 Alpha® Jet
Standard Walter Walter Walter Walter Walter

Coating/grade TML DPP Uncoated WJ30TA WJ30EJ
Dia. range [mm] 1–1,9 3–20 5–20 3–20 3–16
Page B 93 B 94 B 97 B 98 B 101
P Steel CC CC CC CC
M Stainless steel CC CC C
K Cast iron CC CC C CC CC
N NF metals CC CC C CC
S Materials with difficult cutting properties CC CC C CC
H Hard materials C CC CC C
O Other CC C C C

Solid drilling
B1
16 × Dc 16 × Dc 20 × Dc 20 × Dc 20 × Dc 25 × Dc
A6689AMP A6685TFP DC170 Supreme A6789AMP A6794TFP A6785TFP DC170 Supreme

X·treme DM16 Alpha® 4 XD16 X·treme DM20 X·treme DH20 Alpha® 4 XD20

AMP TFP WJ30EJ AMP TFP TFP WJ30EJ
2–2,9 3–16 3–16 2–2,9 3–10 3–16 3–12
B 102 B 103 B 104 B 105 B 106 B 107 B 108
CC CC CC CC CC CC CC
CC C CC C C
CC CC CC CC C CC CC
CC CC CC C CC
CC CC CC C CC
C C C C C C C
C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Drilling depth 25 × Dc 25 × Dc 30 × Dc 30 × Dc 30 × Dc
Designation A6889AMP A6885TFP DC170 Supreme A6989AMP A6994TFP

X·treme DM25 Alpha® 4 XD25 X·treme DM30 X·treme DH30
Standard Walter Walter Walter Walter Walter

Coating/grade AMP TFP WJ30EJ AMP TFP
Dia. range [mm] 2–2,9 3–12 3–12 2–2,9 3–10
Page B 109 B 110 B 111 B 112 B 113
P Steel CC CC CC CC CC
M Stainless steel CC C CC C
K Cast iron CC CC CC CC C
N NF metals CC CC CC C
S Materials with difficult cutting properties CC CC CC C
H Hard materials C C C C C
O Other C C C

Solid drilling
B1
30 × Dc 40 × Dc 50 × Dc 2 × Dc 2 × Dc 2 × Dc
A6985TFP A7495TTP A7595TTP K3281TFT A6181AML A6181TFT A7191TFT

Alpha® 4 XD30 X·treme D40 X·treme D50 X·treme X·treme Pilot 150 XD Pilot X·treme Pilot 180
Pilot Step 90
TFP TTP TTP TFT AML TFT TFT
3–12 3–11 3–9 3–16 2–2,95 3–16 3–20
B 114 B 115 B 116 B 117 B 118 B 119 B 120
C C C CC CC CC CC
CC CC CC CC CC
C CC C C C
C CC C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Drilling depth 2 × Dc
Designation K5191TFT
X·treme Pilot 180 C
Standard Walter
Coating/grade TFT
Shank DIN 6535 HA
Dia. range [mm] 4–7
Page B 122
P Steel CC
M Stainless steel CC
K Cast iron CC
N NF metals CC
S Materials with difficult cutting properties CC
H Hard materials CC
O Other CC

B 23
Solid drilling
B1
Walter Select
Machining
Designation K3879XPL A3279XPL A1164TIN A1163 A1166TIN

X·treme Step 90 A3879XPL Alpha® 2
X·treme
Standard Walter DIN 6537 K DIN 6539 DIN 6539 Walter
Coating/grade XPL XPL TIN Uncoated TIN
Shank DIN 6535 HE DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA
DIN 6535 HE
Dia. range [mm] 3,3–14,5 3–20 1,5–20 1–12 3–20
Page B 123 B 124 B 130 B 134 B 136
P Steel CC CC CC C
M Stainless steel C C C
K Cast iron CC CC CC C
N NF metals C C CC CC
S Materials with difficult cutting properties C C C C
H Hard materials C C C C
O Other C C C CC

Solid drilling
B1
3 × Dc 3 × Dc 5 × Dc 5 × Dc
A1166 A1167A A1167B DC150 Perform DB133 Supreme A3162 A3379XPL

A3979XPL
X·treme
Walter Walter Walter DIN 6537 K Walter DIN 1899 DIN 6537 L
Uncoated Uncoated Uncoated WJ30RE WJ30EL Uncoated XPL
3–20 3–20 3–20 3–20 0,5–2,95 0,1–1,45 3–25
B 136 B 139 B 142 B 145 B 150 B 152 B 154
C CC CC CC CC
C CC
C CC CC CC CC
C C C C CC CC C
C C C CC C
C C C C
C C CC C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Designation A3367 DB133 Supreme A1276TFL A1263

A3967 Alpha® 22
BSX
Standard DIN 6537 L Walter DIN 338 DIN 338
Coating/grade Uncoated WJ30ER TFL Uncoated
Shank DIN 6535 HA DIN 6535 HA DIN 6535 HA DIN 6535 HA

DIN 6535 HE
Dia. range [mm] 3–16 0,5–2,95 3–12 0,6–12
Page B 161 B 164 B 166 B 167
P Steel CC CC
M Stainless steel
K Cast iron CC CC CC C
N NF metals CC CC CC CC
H Hard materials C
O Other C C CC

Solid drilling
B1
Solid carbide chamfer drills with coolant-through
K3299XPL / K3899XPL
X·treme Step 90
– Step length in accordance with DIN 8378

– For thread pilot hole drilling 3×Dc
140° 90°
P M K N S H O
XPL CC C CC CC CC C C
Dc d10 d1
Designation m7 h8 Lc l1 l2 l5 h6
XPL For thread mm mm mm mm mm mm mm
Shank DIN 6535 HA K3299XPL-M4 M4 3,3 5 11 66 28 36 6
K3299XPL-M5 M5 4,2 6 14 66 28 36 6
Dc d10
90° K3299XPL-M6 M6 5 8 17 79 41 36 8
d1 K3299XPL-M8 M8 6,8 10 21 89 47 40 10
K3299XPL-M10 M 10 8,5 12 26 102 55 45 12
Lc
l2 l5 K3299XPL-M12 M 12 10,2 14 30 107 60 45 14
l1 K3299XPL-M14 M 14 12 16 35 115 65 48 16
K3299XPL-M16 M 16 14 18 39 123 73 48 18
Shank DIN 6535 HE K3899XPL-M4 M4 3,3 5 11 66 28 36 6
K3899XPL-M5 M5 4,2 6 14 66 28 36 6
Dc d10
90° K3899XPL-M6 M6 5 8 17 79 41 36 8
d1 K3899XPL-M8 M8 6,8 10 21 89 47 40 10
K3899XPL-M10 M 10 8,5 12 26 102 55 45 12
Lc
l2 l5 K3899XPL-M12 M 12 10,2 14 30 107 60 45 14
l1 K3899XPL-M14 M 14 12 16 35 115 65 48 16
K3899XPL-M16 M 16 14 18 39 123 73 48 18
XIII D1 B 412 B 430

Solid drilling
B1
Solid carbide drills with coolant-through
DC170 Supreme
DIN
3×Dc 6537 K
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
m7 inches/ Lc l1 l2 l5 h6
Designation mm no. mm mm mm mm mm
Shank DIN 6535 HA DC170-03-03.000A1- 3 14 62 20 36 6 b
DC170-03-03.100A1- 3,1 14 62 20 36 6 b
Dc d1
DC170-03-03.175A1- 3,175 1/8“ 14 62 20 36 6 b
DC170-03-03.200A1- 3,2 14 62 20 36 6 b
Lc
l2 l5
DC170-03-03.300A1- 3,3 14 62 20 36 6 b
l1 DC170-03-03.400A1- 3,4 14 62 20 36 6 b
DC170-03-03.500A1- 3,5 14 62 20 36 6 b
DC170-03-03.572A1- 3,572 9/64“ 14 62 20 36 6 b
DC170-03-03.600A1- 3,6 14 62 20 36 6 b
DC170-03-03.700A1- 3,7 14 62 20 36 6 b
DC170-03-03.800A1- 3,8 17 66 24 36 6 b
DC170-03-03.900A1- 3,9 17 66 24 36 6 b
DC170-03-03.969A1- 3,969 5/32“ 17 66 24 36 6 b
DC170-03-04.000A1- 4 17 66 24 36 6 b
DC170-03-04.100A1- 4,1 17 66 24 36 6 b
DC170-03-04.200A1- 4,2 17 66 24 36 6 b
DC170-03-04.300A1- 4,3 17 66 24 36 6 b
DC170-03-04.366A1- 4,366 11/64“ 17 66 24 36 6 b
DC170-03-04.400A1- 4,4 17 66 24 36 6 b
DC170-03-04.500A1- 4,5 17 66 24 36 6 b
DC170-03-04.600A1- 4,6 17 66 24 36 6 b
DC170-03-04.650A1- 4,65 17 66 24 36 6 b
DC170-03-04.700A1- 4,7 17 66 24 36 6 b
DC170-03-04.763A1- 4,763 3/16“ 20 66 28 36 6 b
DC170-03-04.800A1- 4,8 20 66 28 36 6 b
DC170-03-04.900A1- 4,9 20 66 28 36 6 b
DC170-03-05.000A1- 5 20 66 28 36 6 b
DC170-03-05.100A1- 5,1 20 66 28 36 6 b
DC170-03-05.159A1- 5,159 13/64“ 20 66 28 36 6 b
DC170-03-05.200A1- 5,2 20 66 28 36 6 b
DC170-03-05.300A1- 5,3 20 66 28 36 6 b
DC170-03-05.400A1- 5,4 20 66 28 36 6 b
DC170-03-05.500A1- 5,5 20 66 28 36 6 b
DC170-03-05.550A1- 5,55 20 66 28 36 6 b
DC170-03-05.556A1- 5,556 7/32“ 20 66 28 36 6 b
DC170-03-05.600A1- 5,6 20 66 28 36 6 b
DC170-03-05.700A1- 5,7 20 66 28 36 6 b
DC170-03-05.800A1- 5,8 20 66 28 36 6 b
DC170-03-05.900A1- 5,9 20 66 28 36 6 b
DC170-03-05.953A1- 5,953 15/64“ 20 66 28 36 6 b
DC170-03-06.000A1- 6 20 66 28 36 6 b
DC170-03-06.100A1- 6,1 24 79 34 36 8 b
DC170-03-06.200A1- 6,2 24 79 34 36 8 b
Ordering example for the WJ30EJ grade: DC170-03-03.000A1-WJ30EJ Continued
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-03-06.300A1- 6,3 24 79 34 36 8 b
DC170-03-06.350A1- 6,35 1/4“ 24 79 34 36 8 b
Dc d1
DC170-03-06.400A1- 6,4 24 79 34 36 8 b
DC170-03-06.500A1- 6,5 24 79 34 36 8 b
Lc
l2 l5
DC170-03-06.600A1- 6,6 24 79 34 36 8 b
l1 DC170-03-06.700A1- 6,7 24 79 34 36 8 b
DC170-03-06.747A1- 6,747 17/64“ 24 79 34 36 8 b
DC170-03-06.800A1- 6,8 24 79 34 36 8 b
DC170-03-06.900A1- 6,9 24 79 34 36 8 b
DC170-03-07.000A1- 7 24 79 34 36 8 b
DC170-03-07.100A1- 7,1 29 79 41 36 8 b
DC170-03-07.144A1- 7,144 9/32“ 29 79 41 36 8 b
DC170-03-07.200A1- 7,2 29 79 41 36 8 b
DC170-03-07.300A1- 7,3 29 79 41 36 8 b
DC170-03-07.400A1- 7,4 29 79 41 36 8 b
DC170-03-07.500A1- 7,5 29 79 41 36 8 b
DC170-03-07.541A1- 7,541 19/64“ 29 79 41 36 8 b
DC170-03-07.800A1- 7,8 29 79 41 36 8 b
DC170-03-07.900A1- 7,9 29 79 41 36 8 b
DC170-03-07.938A1- 7,938 5/16“ 29 79 41 36 8 b
DC170-03-08.000A1- 8 29 79 41 36 8 b
DC170-03-08.100A1- 8,1 35 89 47 40 10 b
DC170-03-08.200A1- 8,2 35 89 47 40 10 b
DC170-03-08.300A1- 8,3 35 89 47 40 10 b
DC170-03-08.334A1- 8,334 21/64“ 35 89 47 40 10 b
DC170-03-08.400A1- 8,4 35 89 47 40 10 b
DC170-03-08.500A1- 8,5 35 89 47 40 10 b
DC170-03-08.600A1- 8,6 35 89 47 40 10 b
DC170-03-08.700A1- 8,7 35 89 47 40 10 b
DC170-03-08.731A1- 8,731 11/32“ 35 89 47 40 10 b
DC170-03-08.800A1- 8,8 35 89 47 40 10 b
DC170-03-09.000A1- 9 35 89 47 40 10 b
DC170-03-09.128A1- 9,128 23/64“ 35 89 47 40 10 b
DC170-03-09.200A1- 9,2 35 89 47 40 10 b
DC170-03-09.300A1- 9,3 35 89 47 40 10 b
DC170-03-09.500A1- 9,5 35 89 47 40 10 b
DC170-03-09.525A1- 9,525 3/8“ 35 89 47 40 10 b
DC170-03-09.600A1- 9,6 35 89 47 40 10 b
DC170-03-09.700A1- 9,7 35 89 47 40 10 b
DC170-03-09.800A1- 9,8 35 89 47 40 10 b
DC170-03-09.922A1- 9,922 25/64“ 35 89 47 40 10 b
DC170-03-10.000A1- 10 35 89 47 40 10 b
DC170-03-10.100A1- 10,1 40 102 55 45 12 b
DC170-03-10.200A1- 10,2 40 102 55 45 12 b
DC170-03-10.300A1- 10,3 40 102 55 45 12 b
DC170-03-10.319A1- 10,319 13/32“ 40 102 55 45 12 b
DC170-03-10.400A1- 10,4 40 102 55 45 12 b
DC170-03-10.500A1- 10,5 40 102 55 45 12 b
DC170-03-10.716A1- 10,716 27/64“ 40 102 55 45 12 b
DC170-03-10.800A1- 10,8 40 102 55 45 12 b
DC170-03-11.000A1- 11 40 102 55 45 12 b
DC170-03-11.100A1- 11,1 40 102 55 45 12 b
DC170-03-11.113A1- 11,113 7/16“ 40 102 55 45 12 b
DC170-03-11.200A1- 11,2 40 102 55 45 12 b
DC170-03-11.500A1- 11,5 40 102 55 45 12 b
DC170-03-11.509A1- 11,509 29/64“ 40 102 55 45 12 b
DC170-03-11.700A1- 11,7 40 102 55 45 12 b
DC170-03-11.800A1- 11,8 40 102 55 45 12 b
DC170-03-11.906A1- 11,906 15/32“ 40 102 55 45 12 b
DC170-03-12.000A1- 12 40 102 55 45 12 b
DC170-03-12.100A1- 12,1 43 107 60 45 14 b
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-03-12.200A1- 12,2 43 107 60 45 14 b
DC170-03-12.300A1- 12,3 43 107 60 45 14 b
Dc d1
DC170-03-12.303A1- 12,303 31/64“ 43 107 60 45 14 b
DC170-03-12.500A1- 12,5 43 107 60 45 14 b
Lc
l2 l5
DC170-03-12.600A1- 12,6 43 107 60 45 14 b
l1 DC170-03-12.700A1- 12,7 1/2“ 43 107 60 45 14 b
DC170-03-13.000A1- 13 43 107 60 45 14 b
DC170-03-13.300A1- 13,3 43 107 60 45 14 b
DC170-03-13.494A1- 13,494 17/32“ 43 107 60 45 14 b
DC170-03-13.500A1- 13,5 43 107 60 45 14 b
DC170-03-14.000A1- 14 43 107 60 45 14 b
DC170-03-14.288A1- 14,288 9/16“ 45 115 65 48 16 b
DC170-03-14.500A1- 14,5 45 115 65 48 16 b
DC170-03-15.000A1- 15 45 115 65 48 16 b
DC170-03-15.500A1- 15,5 45 115 65 48 16 b
DC170-03-15.875A1- 15,875 5/8“ 45 115 65 48 16 b
DC170-03-16.000A1- 16 45 115 65 48 16 b
DC170-03-16.500A1- 16,5 51 123 73 48 18 b
DC170-03-17.000A1- 17 51 123 73 48 18 b
DC170-03-17.500A1- 17,5 51 123 73 48 18 b
DC170-03-18.000A1- 18 51 123 73 48 18 b
DC170-03-19.050A1- 19,05 3/4“ 55 131 79 50 20 b
DC170-03-20.000A1- 20 55 131 79 50 20 b
Ordering example for the WJ30EJ grade: DC170-03-03.000A1-WJ30EJ
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 412 B 430

Solid drilling
B1
A3289DPL
X·treme Plus
DIN
3×Dc 6537 K
140°
P M K N S H O
DPL CC CC CC CC CC CC C
Dc d1
Designation m7 Dc Lc l1 l2 l5 h6
DPL mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A3289DPL-3 3 14 62 20 36 6
A3289DPL-3.1 3,1 14 62 20 36 6
Dc d1
A3289DPL-1/8IN 3,175 1/8“ 14 62 20 36 6
A3289DPL-3.2 3,2 14 62 20 36 6
Lc A3289DPL-3.3 3,3 14 62 20 36 6
l2 l5
l1 A3289DPL-3.4 3,4 14 62 20 36 6
A3289DPL-3.5 3,5 14 62 20 36 6
A3289DPL-9/64IN 3,572 9/64“ 14 62 20 36 6
A3289DPL-3.6 3,6 14 62 20 36 6
A3289DPL-3.7 3,7 14 62 20 36 6
A3289DPL-3.8 3,8 17 66 24 36 6
A3289DPL-3.9 3,9 17 66 24 36 6
A3289DPL-5/32IN 3,969 5/32“ 17 66 24 36 6
A3289DPL-4 4 17 66 24 36 6
A3289DPL-4.1 4,1 17 66 24 36 6
A3289DPL-4.2 4,2 17 66 24 36 6
A3289DPL-4.3 4,3 17 66 24 36 6
A3289DPL-11/64IN 4,366 11/64“ 17 66 24 36 6
A3289DPL-4.4 4,4 17 66 24 36 6
A3289DPL-4.5 4,5 17 66 24 36 6
A3289DPL-4.6 4,6 17 66 24 36 6
A3289DPL-4.65 4,65 17 66 24 36 6
A3289DPL-4.7 4,7 17 66 24 36 6
A3289DPL-3/16IN 4,763 3/16“ 20 66 28 36 6
A3289DPL-4.8 4,8 20 66 28 36 6
A3289DPL-4.9 4,9 20 66 28 36 6
A3289DPL-5 5 20 66 28 36 6
A3289DPL-5.1 5,1 20 66 28 36 6
A3289DPL-13/64IN 5,159 13/64“ 20 66 28 36 6
A3289DPL-5.2 5,2 20 66 28 36 6
A3289DPL-5.3 5,3 20 66 28 36 6
A3289DPL-5.4 5,4 20 66 28 36 6
A3289DPL-5.5 5,5 20 66 28 36 6
A3289DPL-5.55 5,55 20 66 28 36 6
A3289DPL-7/32IN 5,556 7/32“ 20 66 28 36 6
A3289DPL-5.6 5,6 20 66 28 36 6
A3289DPL-5.7 5,7 20 66 28 36 6
A3289DPL-5.8 5,8 20 66 28 36 6
A3289DPL-5.9 5,9 20 66 28 36 6
A3289DPL-15/64IN 5,953 15/64“ 20 66 28 36 6
A3289DPL-6 6 20 66 28 36 6
A3289DPL-6.1 6,1 24 79 34 36 8
A3289DPL-6.2 6,2 24 79 34 36 8
A3289DPL-6.3 6,3 24 79 34 36 8
A3289DPL-1/4IN 6,35 1/4“ 24 79 34 36 8
A3289DPL-6.4 6,4 24 79 34 36 8
A3289DPL-6.5 6,5 24 79 34 36 8
A3289DPL-6.6 6,6 24 79 34 36 8
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3289DPL-6.7 6,7 24 79 34 36 8
A3289DPL-17/64IN 6,747 17/64“ 24 79 34 36 8
Dc d1
A3289DPL-6.8 6,8 24 79 34 36 8
A3289DPL-6.9 6,9 24 79 34 36 8
Lc A3289DPL-7 7 24 79 34 36 8
l2 l5
l1 A3289DPL-7.1 7,1 29 79 41 36 8
A3289DPL-9/32IN 7,144 9/32“ 29 79 41 36 8
A3289DPL-7.2 7,2 29 79 41 36 8
A3289DPL-7.3 7,3 29 79 41 36 8
A3289DPL-7.4 7,4 29 79 41 36 8
A3289DPL-7.5 7,5 29 79 41 36 8
A3289DPL-19/64IN 7,541 19/64“ 29 79 41 36 8
A3289DPL-7.8 7,8 29 79 41 36 8
A3289DPL-7.9 7,9 29 79 41 36 8
A3289DPL-5/16IN 7,938 5/16“ 29 79 41 36 8
A3289DPL-8 8 29 79 41 36 8
A3289DPL-8.1 8,1 35 89 47 40 10
A3289DPL-8.2 8,2 35 89 47 40 10
A3289DPL-8.3 8,3 35 89 47 40 10
A3289DPL-21/64IN 8,334 21/64“ 35 89 47 40 10
A3289DPL-8.4 8,4 35 89 47 40 10
A3289DPL-8.5 8,5 35 89 47 40 10
A3289DPL-8.6 8,6 35 89 47 40 10
A3289DPL-8.7 8,7 35 89 47 40 10
A3289DPL-11/32IN 8,731 11/32“ 35 89 47 40 10
A3289DPL-8.8 8,8 35 89 47 40 10
A3289DPL-9 9 35 89 47 40 10
A3289DPL-23/64IN 9,128 23/64“ 35 89 47 40 10
A3289DPL-9.2 9,2 35 89 47 40 10
A3289DPL-9.3 9,3 35 89 47 40 10
A3289DPL-9.5 9,5 35 89 47 40 10
A3289DPL-3/8IN 9,525 3/8“ 35 89 47 40 10
A3289DPL-9.6 9,6 35 89 47 40 10
A3289DPL-9.7 9,7 35 89 47 40 10
A3289DPL-9.8 9,8 35 89 47 40 10
A3289DPL-25/64IN 9,922 25/64“ 35 89 47 40 10
A3289DPL-10 10 35 89 47 40 10
A3289DPL-10.1 10,1 40 102 55 45 12
A3289DPL-10.2 10,2 40 102 55 45 12
A3289DPL-10.3 10,3 40 102 55 45 12
A3289DPL-13/32IN 10,319 13/32“ 40 102 55 45 12
A3289DPL-10.4 10,4 40 102 55 45 12
A3289DPL-10.5 10,5 40 102 55 45 12
A3289DPL-27/64IN 10,716 27/64“ 40 102 55 45 12
A3289DPL-10.8 10,8 40 102 55 45 12
A3289DPL-11 11 40 102 55 45 12
A3289DPL-11.1 11,1 40 102 55 45 12
A3289DPL-7/16IN 11,113 7/16“ 40 102 55 45 12
A3289DPL-11.2 11,2 40 102 55 45 12
A3289DPL-11.5 11,5 40 102 55 45 12
A3289DPL-29/64IN 11,509 29/64“ 40 102 55 45 12
A3289DPL-11.7 11,7 40 102 55 45 12
A3289DPL-11.8 11,8 40 102 55 45 12
A3289DPL-15/32IN 11,906 15/32“ 40 102 55 45 12
A3289DPL-12 12 40 102 55 45 12
A3289DPL-12.1 12,1 43 107 60 45 14
A3289DPL-12.2 12,2 43 107 60 45 14
A3289DPL-12.3 12,3 43 107 60 45 14
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3289DPL-31/64IN 12,303 31/64“ 43 107 60 45 14
A3289DPL-12.5 12,5 43 107 60 45 14
Dc d1
A3289DPL-12.6 12,6 43 107 60 45 14
A3289DPL-1/2IN 12,7 1/2“ 43 107 60 45 14
Lc A3289DPL-13 13 43 107 60 45 14
l2 l5
l1 A3289DPL-13.3 13,3 43 107 60 45 14
A3289DPL-17/32IN 13,494 17/32“ 43 107 60 45 14
A3289DPL-13.5 13,5 43 107 60 45 14
A3289DPL-14 14 43 107 60 45 14
A3289DPL-9/16IN 14,288 9/16“ 45 115 65 48 16
A3289DPL-14.5 14,5 45 115 65 48 16
A3289DPL-15 15 45 115 65 48 16
A3289DPL-15.5 15,5 45 115 65 48 16
A3289DPL-5/8IN 15,875 5/8“ 45 115 65 48 16
A3289DPL-16 16 45 115 65 48 16
A3289DPL-16.5 16,5 51 123 73 48 18
A3289DPL-17 17 51 123 73 48 18
A3289DPL-17.5 17,5 51 123 73 48 18
A3289DPL-18 18 51 123 73 48 18
A3289DPL-3/4IN 19,05 3/4“ 55 131 79 50 20
A3289DPL-20 20 55 131 79 50 20
XIII D1 B 412 B 430

Solid drilling
B1
A3293TTP
X·treme Inox
DIN
3×Dc 6537 K
140°
P M K N S H O
TTP C CC C CC C
Dc d1
TTP mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A3293TTP-3 3 14 62 20 36 6
A3293TTP-3.1 3,1 14 62 20 36 6
Dc d1
A3293TTP-1/8IN 3,175 1/8“ 14 62 20 36 6
A3293TTP-3.2 3,2 14 62 20 36 6
Lc A3293TTP-3.25 3,25 14 62 20 36 6
l2 l5
l1 A3293TTP-3.3 3,3 14 62 20 36 6
A3293TTP-3.4 3,4 14 62 20 36 6
A3293TTP-3.5 3,5 14 62 20 36 6
A3293TTP-3.6 3,6 14 62 20 36 6
A3293TTP-3.7 3,7 14 62 20 36 6
A3293TTP-3.8 3,8 17 66 24 36 6
A3293TTP-3.9 3,9 17 66 24 36 6
A3293TTP-5/32IN 3,969 5/32“ 17 66 24 36 6
A3293TTP-4 4 17 66 24 36 6
A3293TTP-4.1 4,1 17 66 24 36 6
A3293TTP-4.2 4,2 17 66 24 36 6
A3293TTP-4.3 4,3 17 66 24 36 6
A3293TTP-11/64IN 4,365 11/64“ 17 66 24 36 6
A3293TTP-4.4 4,4 17 66 24 36 6
A3293TTP-4.5 4,5 17 66 24 36 6
A3293TTP-4.6 4,6 17 66 24 36 6
A3293TTP-4.65 4,65 17 66 24 36 6
A3293TTP-4.7 4,7 17 66 24 36 6
A3293TTP-3/16IN 4,763 3/16“ 20 66 28 36 6
A3293TTP-4.8 4,8 20 66 28 36 6
A3293TTP-4.9 4,9 20 66 28 36 6
A3293TTP-5 5 20 66 28 36 6
A3293TTP-5.1 5,1 20 66 28 36 6
A3293TTP-5.2 5,2 20 66 28 36 6
A3293TTP-5.3 5,3 20 66 28 36 6
A3293TTP-5.4 5,4 20 66 28 36 6
A3293TTP-5.5 5,5 20 66 28 36 6
A3293TTP-5.55 5,55 20 66 28 36 6
A3293TTP-7/32IN 5,556 7/32“ 20 66 28 36 6
A3293TTP-5.6 5,6 20 66 28 36 6
A3293TTP-5.7 5,7 20 66 28 36 6
A3293TTP-5.8 5,8 20 66 28 36 6
A3293TTP-5.9 5,9 20 66 28 36 6
A3293TTP-6 6 20 66 28 36 6
A3293TTP-6.1 6,1 24 79 34 36 8
A3293TTP-6.2 6,2 24 79 34 36 8
A3293TTP-6.3 6,3 24 79 34 36 8
A3293TTP-1/4IN 6,35 1/4“ 24 79 34 36 8
A3293TTP-6.4 6,4 24 79 34 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3293TTP-6.5 6,5 24 79 34 36 8
A3293TTP-6.6 6,6 24 79 34 36 8
Dc d1
A3293TTP-6.7 6,7 24 79 34 36 8
A3293TTP-6.8 6,8 24 79 34 36 8
Lc A3293TTP-6.9 6,9 24 79 34 36 8
l2 l5
l1 A3293TTP-7 7 24 79 34 36 8
A3293TTP-7.1 7,1 29 79 41 36 8
A3293TTP-9/32IN 7,144 9/32“ 29 79 41 36 8
A3293TTP-7.2 7,2 29 79 41 36 8
A3293TTP-7.3 7,3 29 79 41 36 8
A3293TTP-7.4 7,4 29 79 41 36 8
A3293TTP-7.5 7,5 29 79 41 36 8
A3293TTP-7.6 7,6 29 79 41 36 8
A3293TTP-7.7 7,7 29 79 41 36 8
A3293TTP-7.8 7,8 29 79 41 36 8
A3293TTP-7.9 7,9 29 79 41 36 8
A3293TTP-5/16IN 7,938 5/16“ 29 79 41 36 8
A3293TTP-8 8 29 79 41 36 8
A3293TTP-8.1 8,1 35 89 47 40 10
A3293TTP-8.2 8,2 35 89 47 40 10
A3293TTP-8.3 8,3 35 89 47 40 10
A3293TTP-8.4 8,4 35 89 47 40 10
A3293TTP-8.5 8,5 35 89 47 40 10
A3293TTP-8.6 8,6 35 89 47 40 10
A3293TTP-8.7 8,7 35 89 47 40 10
A3293TTP-11/32IN 8,731 11/32“ 35 89 47 40 10
A3293TTP-8.8 8,8 35 89 47 40 10
A3293TTP-8.9 8,9 35 89 47 40 10
A3293TTP-9 9 35 89 47 40 10
A3293TTP-9.1 9,1 35 89 47 40 10
A3293TTP-23/64IN 9,128 23/64“ 35 89 47 40 10
A3293TTP-9.2 9,2 35 89 47 40 10
A3293TTP-9.3 9,3 35 89 47 40 10
A3293TTP-9.4 9,4 35 89 47 40 10
A3293TTP-9.5 9,5 35 89 47 40 10
A3293TTP-3/8IN 9,525 3/8“ 35 89 47 40 10
A3293TTP-9.6 9,6 35 89 47 40 10
A3293TTP-9.7 9,7 35 89 47 40 10
A3293TTP-9.8 9,8 35 89 47 40 10
A3293TTP-9.9 9,9 35 89 47 40 10
A3293TTP-10 10 35 89 47 40 10
A3293TTP-10.1 10,1 40 102 55 45 12
A3293TTP-10.2 10,2 40 102 55 45 12
A3293TTP-10.3 10,3 40 102 55 45 12
A3293TTP-13/32IN 10,319 13/32“ 40 102 55 45 12
A3293TTP-10.4 10,4 40 102 55 45 12
A3293TTP-10.5 10,5 40 102 55 45 12
A3293TTP-10.6 10,6 40 102 55 45 12
A3293TTP-10.7 10,7 40 102 55 45 12
A3293TTP-10.8 10,8 40 102 55 45 12
A3293TTP-10.9 10,9 40 102 55 45 12
A3293TTP-11 11 40 102 55 45 12
A3293TTP-11.1 11,1 40 102 55 45 12
A3293TTP-7/16IN 11,113 7/16“ 40 102 55 45 12
A3293TTP-11.2 11,2 40 102 55 45 12
A3293TTP-11.3 11,3 40 102 55 45 12
A3293TTP-11.4 11,4 40 102 55 45 12
A3293TTP-11.5 11,5 40 102 55 45 12
A3293TTP-11.6 11,6 40 102 55 45 12
A3293TTP-11.7 11,7 40 102 55 45 12
A3293TTP-11.8 11,8 40 102 55 45 12
A3293TTP-11.9 11,9 40 102 55 45 12
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3293TTP-15/32IN 11,906 15/32“ 40 102 55 45 12
A3293TTP-12 12 40 102 55 45 12
Dc d1
A3293TTP-12.5 12,5 43 107 60 45 14
A3293TTP-1/2IN 12,7 1/2“ 43 107 60 45 14
Lc A3293TTP-12.9 12,9 43 107 60 45 14
l2 l5
l1 A3293TTP-13 13 43 107 60 45 14
A3293TTP-13.1 13,1 43 107 60 45 14
A3293TTP-13.3 13,3 43 107 60 45 14
A3293TTP-13.5 13,5 43 107 60 45 14
A3293TTP-13.8 13,8 43 107 60 45 14
A3293TTP-14 14 43 107 60 45 14
A3293TTP-14.2 14,2 45 115 65 48 16
A3293TTP-9/16IN 14,288 9/16“ 45 115 65 48 16
A3293TTP-14.5 14,5 45 115 65 48 16
A3293TTP-14.75 14,75 45 115 65 48 16
A3293TTP-15 15 45 115 65 48 16
A3293TTP-15.1 15,1 45 115 65 48 16
A3293TTP-15.2 15,2 45 115 65 48 16
A3293TTP-15.5 15,5 45 115 65 48 16
A3293TTP-15.8 15,8 45 115 65 48 16
A3293TTP-5/8IN 15,875 5/8“ 45 115 65 48 16
A3293TTP-16 16 45 115 65 48 16
A3293TTP-16.5 16,5 51 123 73 48 18
A3293TTP-16.8 16,8 51 123 73 48 18
A3293TTP-17 17 51 123 73 48 18
A3293TTP-17.5 17,5 51 123 73 48 18
A3293TTP-17.8 17,8 51 123 73 48 18
A3293TTP-18 18 51 123 73 48 18
A3293TTP-18.5 18,5 55 131 79 50 20
A3293TTP-18.8 18,8 55 131 79 50 20
A3293TTP-19 19 55 131 79 50 20
A3293TTP-3/4IN 19,05 3/4“ 55 131 79 50 20
A3293TTP-19.5 19,5 55 131 79 50 20
A3293TTP-19.8 19,8 55 131 79 50 20
A3293TTP-20 20 55 131 79 50 20
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
A3299XPL / A3899XPL
X·treme
DIN
3×Dc 6537 K
140°
P M K N S H O
Dc d1
XPL mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A3299XPL-3 3 14 62 20 36 6
A3299XPL-3.1 3,1 14 62 20 36 6
Dc d1
A3299XPL-1/8IN 3,175 1/8“ 14 62 20 36 6
A3299XPL-3.2 3,2 14 62 20 36 6
Lc A3299XPL-3.25 3,25 14 62 20 36 6
l2 l5
l1 A3299XPL-3.3 3,3 14 62 20 36 6
A3299XPL-3.4 3,4 14 62 20 36 6
A3299XPL-3.5 3,5 14 62 20 36 6
A3299XPL-9/64IN 3,572 9/64“ 14 62 20 36 6
A3299XPL-3.6 3,6 14 62 20 36 6
A3299XPL-3.65 3,65 14 62 20 36 6
A3299XPL-3.7 3,7 14 62 20 36 6
A3299XPL-3.8 3,8 17 66 24 36 6
A3299XPL-3.9 3,9 17 66 24 36 6
A3299XPL-5/32IN 3,969 5/32“ 17 66 24 36 6
A3299XPL-4 4 17 66 24 36 6
A3299XPL-4.1 4,1 17 66 24 36 6
A3299XPL-4.2 4,2 17 66 24 36 6
A3299XPL-4.3 4,3 17 66 24 36 6
A3299XPL-11/64IN 4,366 11/64“ 17 66 24 36 6
A3299XPL-4.4 4,4 17 66 24 36 6
A3299XPL-4.5 4,5 17 66 24 36 6
A3299XPL-4.6 4,6 17 66 24 36 6
A3299XPL-4.65 4,65 17 66 24 36 6
A3299XPL-4.7 4,7 17 66 24 36 6
A3299XPL-3/16IN 4,763 3/16“ 20 66 28 36 6
A3299XPL-4.8 4,8 20 66 28 36 6
A3299XPL-4.9 4,9 20 66 28 36 6
A3299XPL-5 5 20 66 28 36 6
A3299XPL-5.1 5,1 20 66 28 36 6
A3299XPL-13/64IN 5,159 13/64“ 20 66 28 36 6
A3299XPL-5.2 5,2 20 66 28 36 6
A3299XPL-5.3 5,3 20 66 28 36 6
A3299XPL-5.4 5,4 20 66 28 36 6
A3299XPL-5.5 5,5 20 66 28 36 6
A3299XPL-5.55 5,55 20 66 28 36 6
A3299XPL-7/32IN 5,556 7/32“ 20 66 28 36 6
A3299XPL-5.6 5,6 20 66 28 36 6
A3299XPL-5.7 5,7 20 66 28 36 6
A3299XPL-5.8 5,8 20 66 28 36 6
A3299XPL-5.9 5,9 20 66 28 36 6
A3299XPL-15/64IN 5,953 15/64“ 20 66 28 36 6
A3299XPL-6 6 20 66 28 36 6
A3299XPL-6.1 6,1 24 79 34 36 8
A3299XPL-6.2 6,2 24 79 34 36 8
A3299XPL-6.3 6,3 24 79 34 36 8
A3299XPL-1/4IN 6,35 1/4“ 24 79 34 36 8
A3299XPL-6.4 6,4 24 79 34 36 8
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3299XPL-6.5 6,5 24 79 34 36 8
A3299XPL-6.6 6,6 24 79 34 36 8
Dc d1
A3299XPL-6.7 6,7 24 79 34 36 8
A3299XPL-17/64IN 6,747 17/64“ 24 79 34 36 8
Lc A3299XPL-6.8 6,8 24 79 34 36 8
l2 l5
l1 A3299XPL-6.9 6,9 24 79 34 36 8
A3299XPL-7 7 24 79 34 36 8
A3299XPL-7.1 7,1 29 79 41 36 8
A3299XPL-9/32IN 7,144 9/32“ 29 79 41 36 8
A3299XPL-7.2 7,2 29 79 41 36 8
A3299XPL-7.3 7,3 29 79 41 36 8
A3299XPL-7.4 7,4 29 79 41 36 8
A3299XPL-7.5 7,5 29 79 41 36 8
A3299XPL-19/64IN 7,541 19/64“ 29 79 41 36 8
A3299XPL-7.55 7,55 29 79 41 36 8
A3299XPL-7.6 7,6 29 79 41 36 8
A3299XPL-7.7 7,7 29 79 41 36 8
A3299XPL-7.8 7,8 29 79 41 36 8
A3299XPL-7.9 7,9 29 79 41 36 8
A3299XPL-5/16IN 7,938 5/16“ 29 79 41 36 8
A3299XPL-8 8 29 79 41 36 8
A3299XPL-8.1 8,1 35 89 47 40 10
A3299XPL-8.2 8,2 35 89 47 40 10
A3299XPL-8.3 8,3 35 89 47 40 10
A3299XPL-21/64IN 8,334 21/64“ 35 89 47 40 10
A3299XPL-8.4 8,4 35 89 47 40 10
A3299XPL-8.5 8,5 35 89 47 40 10
A3299XPL-8.6 8,6 35 89 47 40 10
A3299XPL-8.7 8,7 35 89 47 40 10
A3299XPL-11/32IN 8,731 11/32“ 35 89 47 40 10
A3299XPL-8.8 8,8 35 89 47 40 10
A3299XPL-8.9 8,9 35 89 47 40 10
A3299XPL-9 9 35 89 47 40 10
A3299XPL-9.1 9,1 35 89 47 40 10
A3299XPL-23/64IN 9,128 23/64“ 35 89 47 40 10
A3299XPL-9.2 9,2 35 89 47 40 10
A3299XPL-9.3 9,3 35 89 47 40 10
A3299XPL-9.4 9,4 35 89 47 40 10
A3299XPL-9.5 9,5 35 89 47 40 10
A3299XPL-3/8IN 9,525 3/8“ 35 89 47 40 10
A3299XPL-9.55 9,55 35 89 47 40 10
A3299XPL-9.6 9,6 35 89 47 40 10
A3299XPL-9.7 9,7 35 89 47 40 10
A3299XPL-9.8 9,8 35 89 47 40 10
A3299XPL-9.9 9,9 35 89 47 40 10
A3299XPL-25/64IN 9,922 25/64“ 35 89 47 40 10
A3299XPL-10 10 35 89 47 40 10
A3299XPL-10.1 10,1 40 102 55 45 12
A3299XPL-10.2 10,2 40 102 55 45 12
A3299XPL-10.3 10,3 40 102 55 45 12
A3299XPL-13/32IN 10,319 13/32“ 40 102 55 45 12
A3299XPL-10.4 10,4 40 102 55 45 12
A3299XPL-10.5 10,5 40 102 55 45 12
A3299XPL-10.6 10,6 40 102 55 45 12
A3299XPL-10.7 10,7 40 102 55 45 12
A3299XPL-27/64IN 10,716 27/64“ 40 102 55 45 12
A3299XPL-10.8 10,8 40 102 55 45 12
A3299XPL-10.9 10,9 40 102 55 45 12
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3299XPL-11 11 40 102 55 45 12
A3299XPL-11.1 11,1 40 102 55 45 12
Dc d1
A3299XPL-7/16IN 11,113 7/16“ 40 102 55 45 12
A3299XPL-11.2 11,2 40 102 55 45 12
Lc A3299XPL-11.3 11,3 40 102 55 45 12
l2 l5
l1 A3299XPL-11.4 11,4 40 102 55 45 12
A3299XPL-11.5 11,5 40 102 55 45 12
A3299XPL-29/64IN 11,509 29/64“ 40 102 55 45 12
A3299XPL-11.6 11,6 40 102 55 45 12
A3299XPL-11.7 11,7 40 102 55 45 12
A3299XPL-11.8 11,8 40 102 55 45 12
A3299XPL-11.9 11,9 40 102 55 45 12
A3299XPL-15/32IN 11,906 15/32“ 40 102 55 45 12
A3299XPL-12 12 40 102 55 45 12
A3299XPL-12.1 12,1 43 107 60 45 14
A3299XPL-12.2 12,2 43 107 60 45 14
A3299XPL-12.25 12,25 43 107 60 45 14
A3299XPL-12.3 12,3 43 107 60 45 14
A3299XPL-31/64IN 12,303 31/64“ 43 107 60 45 14
A3299XPL-12.5 12,5 43 107 60 45 14
A3299XPL-12.6 12,6 43 107 60 45 14
A3299XPL-1/2IN 12,7 1/2“ 43 107 60 45 14
A3299XPL-12.75 12,75 43 107 60 45 14
A3299XPL-12.8 12,8 43 107 60 45 14
A3299XPL-12.9 12,9 43 107 60 45 14
A3299XPL-13 13 43 107 60 45 14
A3299XPL-13.1 13,1 43 107 60 45 14
A3299XPL-13.2 13,2 43 107 60 45 14
A3299XPL-13.3 13,3 43 107 60 45 14
A3299XPL-17/32IN 13,494 17/32“ 43 107 60 45 14
A3299XPL-13.5 13,5 43 107 60 45 14
A3299XPL-13.8 13,8 43 107 60 45 14
A3299XPL-13.9 13,9 43 107 60 45 14
A3299XPL-14 14 43 107 60 45 14
A3299XPL-14.1 14,1 45 115 65 48 16
A3299XPL-14.2 14,2 45 115 65 48 16
A3299XPL-9/16IN 14,288 9/16“ 45 115 65 48 16
A3299XPL-14.3 14,3 45 115 65 48 16
A3299XPL-14.4 14,4 45 115 65 48 16
A3299XPL-14.5 14,5 45 115 65 48 16
A3299XPL-14.6 14,6 45 115 65 48 16
A3299XPL-14.7 14,7 45 115 65 48 16
A3299XPL-14.75 14,75 45 115 65 48 16
A3299XPL-14.8 14,8 45 115 65 48 16
A3299XPL-15 15 45 115 65 48 16
A3299XPL-15.1 15,1 45 115 65 48 16
A3299XPL-15.2 15,2 45 115 65 48 16
A3299XPL-15.3 15,3 45 115 65 48 16
A3299XPL-15.5 15,5 45 115 65 48 16
A3299XPL-15.6 15,6 45 115 65 48 16
A3299XPL-15.7 15,7 45 115 65 48 16
A3299XPL-15.8 15,8 45 115 65 48 16
A3299XPL-5/8IN 15,875 5/8“ 45 115 65 48 16
A3299XPL-15.9 15,9 45 115 65 48 16
A3299XPL-16 16 45 115 65 48 16
A3299XPL-16.2 16,2 51 123 73 48 18
A3299XPL-16.4 16,4 51 123 73 48 18
A3299XPL-16.5 16,5 51 123 73 48 18
A3299XPL-16.7 16,7 51 123 73 48 18
A3299XPL-16.8 16,8 51 123 73 48 18
A3299XPL-17 17 51 123 73 48 18
A3299XPL-17.2 17,2 51 123 73 48 18
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3299XPL-17.3 17,3 51 123 73 48 18
A3299XPL-17.5 17,5 51 123 73 48 18
Dc d1
A3299XPL-17.6 17,6 51 123 73 48 18
A3299XPL-17.7 17,7 51 123 73 48 18
Lc A3299XPL-18 18 51 123 73 48 18
l2 l5
l1 A3299XPL-18.2 18,2 55 131 79 50 20
A3299XPL-18.5 18,5 55 131 79 50 20
A3299XPL-18.7 18,7 55 131 79 50 20
A3299XPL-18.8 18,8 55 131 79 50 20
A3299XPL-19 19 55 131 79 50 20
A3299XPL-3/4IN 19,05 3/4“ 55 131 79 50 20
A3299XPL-19.5 19,5 55 131 79 50 20
A3299XPL-19.7 19,7 55 131 79 50 20
A3299XPL-20 20 55 131 79 50 20
Shank DIN 6535 HE A3899XPL-3 3 14 62 20 36 6
A3899XPL-3.1 3,1 14 62 20 36 6
Dc d1
A3899XPL-3.2 3,2 14 62 20 36 6
A3899XPL-3.25 3,25 14 62 20 36 6
Lc A3899XPL-3.3 3,3 14 62 20 36 6
l2 l5
l1 A3899XPL-3.4 3,4 14 62 20 36 6
A3899XPL-3.5 3,5 14 62 20 36 6
A3899XPL-3.6 3,6 14 62 20 36 6
A3899XPL-3.65 3,65 14 62 20 36 6
A3899XPL-3.7 3,7 14 62 20 36 6
A3899XPL-3.8 3,8 17 66 24 36 6
A3899XPL-3.9 3,9 17 66 24 36 6
A3899XPL-4 4 17 66 24 36 6
A3899XPL-4.1 4,1 17 66 24 36 6
A3899XPL-4.2 4,2 17 66 24 36 6
A3899XPL-4.3 4,3 17 66 24 36 6
A3899XPL-4.4 4,4 17 66 24 36 6
A3899XPL-4.5 4,5 17 66 24 36 6
A3899XPL-4.6 4,6 17 66 24 36 6
A3899XPL-4.65 4,65 17 66 24 36 6
A3899XPL-4.7 4,7 17 66 24 36 6
A3899XPL-4.8 4,8 20 66 28 36 6
A3899XPL-4.9 4,9 20 66 28 36 6
A3899XPL-5 5 20 66 28 36 6
A3899XPL-5.1 5,1 20 66 28 36 6
A3899XPL-5.2 5,2 20 66 28 36 6
A3899XPL-5.3 5,3 20 66 28 36 6
A3899XPL-5.4 5,4 20 66 28 36 6
A3899XPL-5.5 5,5 20 66 28 36 6
A3899XPL-5.55 5,55 20 66 28 36 6
A3899XPL-5.6 5,6 20 66 28 36 6
A3899XPL-5.7 5,7 20 66 28 36 6
A3899XPL-5.8 5,8 20 66 28 36 6
A3899XPL-5.9 5,9 20 66 28 36 6
A3899XPL-6 6 20 66 28 36 6
A3899XPL-6.1 6,1 24 79 34 36 8
A3899XPL-6.2 6,2 24 79 34 36 8
A3899XPL-6.3 6,3 24 79 34 36 8
A3899XPL-6.4 6,4 24 79 34 36 8
A3899XPL-6.5 6,5 24 79 34 36 8
A3899XPL-6.6 6,6 24 79 34 36 8
A3899XPL-6.7 6,7 24 79 34 36 8
A3899XPL-6.8 6,8 24 79 34 36 8
A3899XPL-6.9 6,9 24 79 34 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3899XPL-7 7 24 79 34 36 8
A3899XPL-7.1 7,1 29 79 41 36 8
Dc d1
A3899XPL-7.2 7,2 29 79 41 36 8
A3899XPL-7.3 7,3 29 79 41 36 8
Lc A3899XPL-7.4 7,4 29 79 41 36 8
l2 l5
l1 A3899XPL-7.5 7,5 29 79 41 36 8
A3899XPL-7.55 7,55 29 79 41 36 8
A3899XPL-7.6 7,6 29 79 41 36 8
A3899XPL-7.7 7,7 29 79 41 36 8
A3899XPL-7.8 7,8 29 79 41 36 8
A3899XPL-7.9 7,9 29 79 41 36 8
A3899XPL-8 8 29 79 41 36 8
A3899XPL-8.1 8,1 35 89 47 40 10
A3899XPL-8.2 8,2 35 89 47 40 10
A3899XPL-8.3 8,3 35 89 47 40 10
A3899XPL-8.4 8,4 35 89 47 40 10
A3899XPL-8.5 8,5 35 89 47 40 10
A3899XPL-8.6 8,6 35 89 47 40 10
A3899XPL-8.7 8,7 35 89 47 40 10
A3899XPL-8.8 8,8 35 89 47 40 10
A3899XPL-8.9 8,9 35 89 47 40 10
A3899XPL-9 9 35 89 47 40 10
A3899XPL-9.1 9,1 35 89 47 40 10
A3899XPL-9.2 9,2 35 89 47 40 10
A3899XPL-9.3 9,3 35 89 47 40 10
A3899XPL-9.4 9,4 35 89 47 40 10
A3899XPL-9.5 9,5 35 89 47 40 10
A3899XPL-9.55 9,55 35 89 47 40 10
A3899XPL-9.6 9,6 35 89 47 40 10
A3899XPL-9.7 9,7 35 89 47 40 10
A3899XPL-9.8 9,8 35 89 47 40 10
A3899XPL-9.9 9,9 35 89 47 40 10
A3899XPL-10 10 35 89 47 40 10
A3899XPL-10.1 10,1 40 102 55 45 12
A3899XPL-10.2 10,2 40 102 55 45 12
A3899XPL-10.3 10,3 40 102 55 45 12
A3899XPL-10.4 10,4 40 102 55 45 12
A3899XPL-10.5 10,5 40 102 55 45 12
A3899XPL-10.7 10,7 40 102 55 45 12
A3899XPL-10.8 10,8 40 102 55 45 12
A3899XPL-10.9 10,9 40 102 55 45 12
A3899XPL-11 11 40 102 55 45 12
A3899XPL-11.1 11,1 40 102 55 45 12
A3899XPL-11.2 11,2 40 102 55 45 12
A3899XPL-11.4 11,4 40 102 55 45 12
A3899XPL-11.5 11,5 40 102 55 45 12
A3899XPL-11.55 11,55 40 102 55 45 12
A3899XPL-11.6 11,6 40 102 55 45 12
A3899XPL-11.7 11,7 40 102 55 45 12
A3899XPL-11.8 11,8 40 102 55 45 12
A3899XPL-11.9 11,9 40 102 55 45 12
A3899XPL-12 12 40 102 55 45 12
A3899XPL-12.1 12,1 43 107 60 45 14
A3899XPL-12.2 12,2 43 107 60 45 14
A3899XPL-12.25 12,25 43 107 60 45 14
A3899XPL-12.3 12,3 43 107 60 45 14
A3899XPL-12.4 12,4 43 107 60 45 14
A3899XPL-12.5 12,5 43 107 60 45 14
A3899XPL-12.6 12,6 43 107 60 45 14
A3899XPL-12.7 12,7 1/2“ 43 107 60 45 14
A3899XPL-12.75 12,75 43 107 60 45 14
A3899XPL-12.8 12,8 43 107 60 45 14
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3899XPL-12.9 12,9 43 107 60 45 14
A3899XPL-13 13 43 107 60 45 14
Dc d1
A3899XPL-13.1 13,1 43 107 60 45 14
A3899XPL-13.2 13,2 43 107 60 45 14
Lc A3899XPL-13.3 13,3 43 107 60 45 14
l2 l5
l1 A3899XPL-13.4 13,4 43 107 60 45 14
A3899XPL-13.5 13,5 43 107 60 45 14
A3899XPL-13.6 13,6 43 107 60 45 14
A3899XPL-13.7 13,7 43 107 60 45 14
A3899XPL-13.8 13,8 43 107 60 45 14
A3899XPL-13.9 13,9 43 107 60 45 14
A3899XPL-14 14 43 107 60 45 14
A3899XPL-14.1 14,1 45 115 65 48 16
A3899XPL-14.2 14,2 45 115 65 48 16
A3899XPL-14.3 14,3 45 115 65 48 16
A3899XPL-14.4 14,4 45 115 65 48 16
A3899XPL-14.5 14,5 45 115 65 48 16
A3899XPL-14.6 14,6 45 115 65 48 16
A3899XPL-14.7 14,7 45 115 65 48 16
A3899XPL-14.75 14,75 45 115 65 48 16
A3899XPL-14.8 14,8 45 115 65 48 16
A3899XPL-15 15 45 115 65 48 16
A3899XPL-15.1 15,1 45 115 65 48 16
A3899XPL-15.2 15,2 45 115 65 48 16
A3899XPL-15.3 15,3 45 115 65 48 16
A3899XPL-15.5 15,5 45 115 65 48 16
A3899XPL-15.6 15,6 45 115 65 48 16
A3899XPL-15.7 15,7 45 115 65 48 16
A3899XPL-15.8 15,8 45 115 65 48 16
A3899XPL-15.9 15,9 45 115 65 48 16
A3899XPL-16 16 45 115 65 48 16
A3899XPL-16.2 16,2 51 123 73 48 18
A3899XPL-16.3 16,3 51 123 73 48 18
A3899XPL-16.4 16,4 51 123 73 48 18
A3899XPL-16.5 16,5 51 123 73 48 18
A3899XPL-16.6 16,6 51 123 73 48 18
A3899XPL-16.7 16,7 51 123 73 48 18
A3899XPL-16.75 16,75 51 123 73 48 18
A3899XPL-16.8 16,8 51 123 73 48 18
A3899XPL-17 17 51 123 73 48 18
A3899XPL-17.2 17,2 51 123 73 48 18
A3899XPL-17.3 17,3 51 123 73 48 18
A3899XPL-17.5 17,5 51 123 73 48 18
A3899XPL-17.6 17,6 51 123 73 48 18
A3899XPL-17.7 17,7 51 123 73 48 18
A3899XPL-17.8 17,8 51 123 73 48 18
A3899XPL-18 18 51 123 73 48 18
A3899XPL-18.2 18,2 55 131 79 50 20
A3899XPL-18.7 18,7 55 131 79 50 20
A3899XPL-18.8 18,8 55 131 79 50 20
A3899XPL-19 19 55 131 79 50 20
A3899XPL-19.5 19,5 55 131 79 50 20
A3899XPL-19.7 19,7 55 131 79 50 20
A3899XPL-19.8 19,8 55 131 79 50 20
A3899XPL-20 20 55 131 79 50 20
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Solid carbide twist drills
DC150 Perform
DIN
3×Dc 6537 K
140°
P M K N S H O
WJ30RE CC C CC CC CC C C
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-03.000A1- 3 14 62 20 36 6 b
DC150-03-03.100A1- 3,1 14 62 20 36 6 b
Dc d1
DC150-03-03.175A1- 3,175 1/8“ 14 62 20 36 6 b
DC150-03-03.200A1- 3,2 14 62 20 36 6 b
Lc
l2 l5
DC150-03-03.250A1- 3,25 14 62 20 36 6 b
l1 DC150-03-03.300A1- 3,3 14 62 20 36 6 b
DC150-03-03.400A1- 3,4 14 62 20 36 6 b
DC150-03-03.500A1- 3,5 14 62 20 36 6 b
DC150-03-03.572A1- 3,572 9/64“ 14 62 20 36 6 b
DC150-03-03.600A1- 3,6 14 62 20 36 6 b
DC150-03-03.650A1- 3,65 14 62 20 36 6 b
DC150-03-03.700A1- 3,7 14 62 20 36 6 b
DC150-03-03.800A1- 3,8 17 66 24 36 6 b
DC150-03-03.900A1- 3,9 17 66 24 36 6 b
DC150-03-03.969A1- 3,969 5/32“ 17 66 24 36 6 b
DC150-03-04.000A1- 4 17 66 24 36 6 b
DC150-03-04.100A1- 4,1 17 66 24 36 6 b
DC150-03-04.200A1- 4,2 17 66 24 36 6 b
DC150-03-04.300A1- 4,3 17 66 24 36 6 b
DC150-03-04.366A1- 4,366 11/64“ 17 66 24 36 6 b
DC150-03-04.400A1- 4,4 17 66 24 36 6 b
DC150-03-04.500A1- 4,5 17 66 24 36 6 b
DC150-03-04.600A1- 4,6 17 66 24 36 6 b
DC150-03-04.650A1- 4,65 17 66 24 36 6 b
DC150-03-04.700A1- 4,7 17 66 24 36 6 b
DC150-03-04.763A1- 4,763 3/16“ 20 66 28 36 6 b
DC150-03-04.800A1- 4,8 20 66 28 36 6 b
DC150-03-04.900A1- 4,9 20 66 28 36 6 b
DC150-03-05.000A1- 5 20 66 28 36 6 b
DC150-03-05.100A1- 5,1 20 66 28 36 6 b
DC150-03-05.159A1- 5,159 13/64“ 20 66 28 36 6 b
DC150-03-05.200A1- 5,2 20 66 28 36 6 b
DC150-03-05.300A1- 5,3 20 66 28 36 6 b
DC150-03-05.400A1- 5,4 20 66 28 36 6 b
DC150-03-05.500A1- 5,5 20 66 28 36 6 b
DC150-03-05.550A1- 5,55 20 66 28 36 6 b
DC150-03-05.556A1- 5,556 7/32“ 20 66 28 36 6 b
DC150-03-05.600A1- 5,6 20 66 28 36 6 b
DC150-03-05.700A1- 5,7 20 66 28 36 6 b
DC150-03-05.800A1- 5,8 20 66 28 36 6 b
DC150-03-05.900A1- 5,9 20 66 28 36 6 b
DC150-03-05.953A1- 5,953 15/64“ 20 66 28 36 6 b
DC150-03-06.000A1- 6 20 66 28 36 6 b
DC150-03-06.100A1- 6,1 24 79 34 36 8 b
DC150-03-06.200A1- 6,2 24 79 34 36 8 b
DC150-03-06.300A1- 6,3 24 79 34 36 8 b
DC150-03-06.350A1- 6,35 1/4“ 24 79 34 36 8 b
Ordering example for the WJ30RE grade: DC150-03-03.000A1-WJ30RE Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-06.400A1- 6,4 24 79 34 36 8 b
DC150-03-06.500A1- 6,5 24 79 34 36 8 b
Dc d1
DC150-03-06.600A1- 6,6 24 79 34 36 8 b
DC150-03-06.700A1- 6,7 24 79 34 36 8 b
Lc
l2 l5
DC150-03-06.747A1- 6,747 17/64“ 24 79 34 36 8 b
l1 DC150-03-06.800A1- 6,8 24 79 34 36 8 b
DC150-03-06.900A1- 6,9 24 79 34 36 8 b
DC150-03-07.000A1- 7 24 79 34 36 8 b
DC150-03-07.100A1- 7,1 29 79 41 36 8 b
DC150-03-07.144A1- 7,144 9/32“ 29 79 41 36 8 b
DC150-03-07.200A1- 7,2 29 79 41 36 8 b
DC150-03-07.300A1- 7,3 29 79 41 36 8 b
DC150-03-07.400A1- 7,4 29 79 41 36 8 b
DC150-03-07.500A1- 7,5 29 79 41 36 8 b
DC150-03-07.541A1- 7,541 19/64“ 29 79 41 36 8 b
DC150-03-07.600A1- 7,6 29 79 41 36 8 b
DC150-03-07.700A1- 7,7 29 79 41 36 8 b
DC150-03-07.800A1- 7,8 29 79 41 36 8 b
DC150-03-07.900A1- 7,9 29 79 41 36 8 b
DC150-03-07.938A1- 7,938 5/16“ 29 79 41 36 8 b
DC150-03-08.000A1- 8 29 79 41 36 8 b
DC150-03-08.100A1- 8,1 35 89 47 40 10 b
DC150-03-08.200A1- 8,2 35 89 47 40 10 b
DC150-03-08.300A1- 8,3 35 89 47 40 10 b
DC150-03-08.334A1- 8,334 21/64“ 35 89 47 40 10 b
DC150-03-08.400A1- 8,4 35 89 47 40 10 b
DC150-03-08.500A1- 8,5 35 89 47 40 10 b
DC150-03-08.600A1- 8,6 35 89 47 40 10 b
DC150-03-08.700A1- 8,7 35 89 47 40 10 b
DC150-03-08.731A1- 8,731 11/32“ 35 89 47 40 10 b
DC150-03-08.800A1- 8,8 35 89 47 40 10 b
DC150-03-08.900A1- 8,9 35 89 47 40 10 b
DC150-03-09.000A1- 9 35 89 47 40 10 b
DC150-03-09.100A1- 9,1 35 89 47 40 10 b
DC150-03-09.128A1- 9,128 23/64“ 35 89 47 40 10 b
DC150-03-09.200A1- 9,2 35 89 47 40 10 b
DC150-03-09.300A1- 9,3 35 89 47 40 10 b
DC150-03-09.400A1- 9,4 35 89 47 40 10 b
DC150-03-09.500A1- 9,5 35 89 47 40 10 b
DC150-03-09.525A1- 9,525 3/8“ 35 89 47 40 10 b
DC150-03-09.600A1- 9,6 35 89 47 40 10 b
DC150-03-09.700A1- 9,7 35 89 47 40 10 b
DC150-03-09.800A1- 9,8 35 89 47 40 10 b
DC150-03-09.900A1- 9,9 35 89 47 40 10 b
DC150-03-09.922A1- 9,922 25/64“ 35 89 47 40 10 b
DC150-03-10.000A1- 10 35 89 47 40 10 b
DC150-03-10.100A1- 10,1 40 102 55 45 12 b
DC150-03-10.200A1- 10,2 40 102 55 45 12 b
DC150-03-10.300A1- 10,3 40 102 55 45 12 b
DC150-03-10.319A1- 10,319 13/32“ 40 102 55 45 12 b
DC150-03-10.400A1- 10,4 40 102 55 45 12 b
DC150-03-10.500A1- 10,5 40 102 55 45 12 b
DC150-03-10.600A1- 10,6 40 102 55 45 12 b
DC150-03-10.700A1- 10,7 40 102 55 45 12 b
DC150-03-10.716A1- 10,716 27/64“ 40 102 55 45 12 b
DC150-03-10.800A1- 10,8 40 102 55 45 12 b
DC150-03-10.900A1- 10,9 40 102 55 45 12 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-11.000A1- 11 40 102 55 45 12 b
DC150-03-11.100A1- 11,1 40 102 55 45 12 b
Dc d1
DC150-03-11.113A1- 11,113 7/16“ 40 102 55 45 12 b
DC150-03-11.200A1- 11,2 40 102 55 45 12 b
Lc
l2 l5
DC150-03-11.300A1- 11,3 40 102 55 45 12 b
l1 DC150-03-11.400A1- 11,4 40 102 55 45 12 b
DC150-03-11.500A1- 11,5 40 102 55 45 12 b
DC150-03-11.509A1- 11,509 29/64“ 40 102 55 45 12 b
DC150-03-11.600A1- 11,6 40 102 55 45 12 b
DC150-03-11.700A1- 11,7 40 102 55 45 12 b
DC150-03-11.800A1- 11,8 40 102 55 45 12 b
DC150-03-11.900A1- 11,9 40 102 55 45 12 b
DC150-03-11.906A1- 11,906 15/32“ 40 102 55 45 12 b
DC150-03-12.000A1- 12 40 102 55 45 12 b
DC150-03-12.100A1- 12,1 43 107 60 45 14 b
DC150-03-12.200A1- 12,2 43 107 60 45 14 b
DC150-03-12.300A1- 12,3 43 107 60 45 14 b
DC150-03-12.303A1- 12,303 31/64“ 43 107 60 45 14 b
DC150-03-12.500A1- 12,5 43 107 60 45 14 b
DC150-03-12.600A1- 12,6 43 107 60 45 14 b
DC150-03-12.700A1- 12,7 1/2“ 43 107 60 45 14 b
DC150-03-12.800A1- 12,8 43 107 60 45 14 b
DC150-03-12.900A1- 12,9 43 107 60 45 14 b
DC150-03-13.000A1- 13 43 107 60 45 14 b
DC150-03-13.100A1- 13,1 43 107 60 45 14 b
DC150-03-13.200A1- 13,2 43 107 60 45 14 b
DC150-03-13.300A1- 13,3 43 107 60 45 14 b
DC150-03-13.494A1- 13,494 17/32“ 43 107 60 45 14 b
DC150-03-13.500A1- 13,5 43 107 60 45 14 b
DC150-03-13.800A1- 13,8 43 107 60 45 14 b
DC150-03-14.000A1- 14 43 107 60 45 14 b
DC150-03-14.100A1- 14,1 45 115 65 48 16 b
DC150-03-14.200A1- 14,2 45 115 65 48 16 b
DC150-03-14.288A1- 14,288 9/16“ 45 115 65 48 16 b
DC150-03-14.500A1- 14,5 45 115 65 48 16 b
DC150-03-14.600A1- 14,6 45 115 65 48 16 b
DC150-03-14.700A1- 14,7 45 115 65 48 16 b
DC150-03-15.000A1- 15 45 115 65 48 16 b
DC150-03-15.100A1- 15,1 45 115 65 48 16 b
DC150-03-15.300A1- 15,3 45 115 65 48 16 b
DC150-03-15.500A1- 15,5 45 115 65 48 16 b
DC150-03-15.700A1- 15,7 45 115 65 48 16 b
DC150-03-15.800A1- 15,8 45 115 65 48 16 b
DC150-03-15.875A1- 15,875 5/8“ 45 115 65 48 16 b
DC150-03-16.000A1- 16 45 115 65 48 16 b
DC150-03-16.300A1- 16,3 51 123 73 48 18 b
DC150-03-16.500A1- 16,5 51 123 73 48 18 b
DC150-03-16.700A1- 16,7 51 123 73 48 18 b
DC150-03-17.000A1- 17 51 123 73 48 18 b
DC150-03-17.500A1- 17,5 51 123 73 48 18 b
DC150-03-18.000A1- 18 51 123 73 48 18 b
DC150-03-18.500A1- 18,5 55 131 79 50 20 b
DC150-03-19.000A1- 19 55 131 79 50 20 b
DC150-03-19.050A1- 19,05 3/4“ 55 131 79 50 20 b
DC150-03-20.000A1- 20 55 131 79 50 20 b
Shank DIN 6535 HE DC150-03-03.000F1- 3 14 62 20 36 6 b
DC150-03-03.300F1- 3,3 14 62 20 36 6 b
Dc d1
DC150-03-03.400F1- 3,4 14 62 20 36 6 b
DC150-03-03.500F1- 3,5 14 62 20 36 6 b
Lc
l2 l5
DC150-03-03.700F1- 3,7 14 62 20 36 6 b
l1 DC150-03-03.800F1- 3,8 17 66 24 36 6 b
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HE DC150-03-04.000F1- 4 17 66 24 36 6 b
DC150-03-04.200F1- 4,2 17 66 24 36 6 b
Dc d1
DC150-03-04.300F1- 4,3 17 66 24 36 6 b
DC150-03-04.500F1- 4,5 17 66 24 36 6 b
Lc
l2 l5
DC150-03-04.800F1- 4,8 20 66 28 36 6 b
l1 DC150-03-05.000F1- 5 20 66 28 36 6 b
DC150-03-05.100F1- 5,1 20 66 28 36 6 b
DC150-03-05.300F1- 5,3 20 66 28 36 6 b
DC150-03-05.500F1- 5,5 20 66 28 36 6 b
DC150-03-06.000F1- 6 20 66 28 36 6 b
DC150-03-06.500F1- 6,5 24 79 34 36 8 b
DC150-03-06.700F1- 6,7 24 79 34 36 8 b
DC150-03-06.800F1- 6,8 24 79 34 36 8 b
DC150-03-07.000F1- 7 24 79 34 36 8 b
DC150-03-07.500F1- 7,5 29 79 41 36 8 b
DC150-03-07.800F1- 7,8 29 79 41 36 8 b
DC150-03-08.000F1- 8 29 79 41 36 8 b
DC150-03-08.500F1- 8,5 35 89 47 40 10 b
DC150-03-08.600F1- 8,6 35 89 47 40 10 b
DC150-03-08.800F1- 8,8 35 89 47 40 10 b
DC150-03-09.000F1- 9 35 89 47 40 10 b
DC150-03-10.000F1- 10 35 89 47 40 10 b
DC150-03-10.200F1- 10,2 40 102 55 45 12 b
DC150-03-10.300F1- 10,3 40 102 55 45 12 b
DC150-03-10.500F1- 10,5 40 102 55 45 12 b
DC150-03-10.800F1- 10,8 40 102 55 45 12 b
DC150-03-11.000F1- 11 40 102 55 45 12 b
DC150-03-11.800F1- 11,8 40 102 55 45 12 b
DC150-03-12.000F1- 12 40 102 55 45 12 b
DC150-03-12.200F1- 12,2 43 107 60 45 14 b
DC150-03-12.500F1- 12,5 43 107 60 45 14 b
DC150-03-13.000F1- 13 43 107 60 45 14 b
DC150-03-14.000F1- 14 43 107 60 45 14 b
DC150-03-15.000F1- 15 45 115 65 48 16 b
DC150-03-15.500F1- 15,5 45 115 65 48 16 b
DC150-03-16.000F1- 16 45 115 65 48 16 b
DC150-03-16.500F1- 16,5 51 123 73 48 18 b
DC150-03-17.000F1- 17 51 123 73 48 18 b
DC150-03-17.500F1- 17,5 51 123 73 48 18 b
DC150-03-18.000F1- 18 51 123 73 48 18 b
DC150-03-19.000F1- 19 55 131 79 50 20 b
DC150-03-20.000F1- 20 55 131 79 50 20 b
Ordering example for the WJ30RE grade: DC150-03-03.000A1-WJ30RE
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 412 B 430

Solid drilling
B1
DC170 Supreme
DIN
5×Dc 6537 L
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-05-03.000A1- 3 23 66 28 36 6 b
DC170-05-03.100A1- 3,1 23 66 28 36 6 b
Dc d1
DC170-05-03.175A1- 3,175 1/8“ 23 66 28 36 6 b
DC170-05-03.200A1- 3,2 23 66 28 36 6 b
Lc
l2 l5
DC170-05-03.300A1- 3,3 23 66 28 36 6 b
l1 DC170-05-03.400A1- 3,4 23 66 28 36 6 b
DC170-05-03.500A1- 3,5 23 66 28 36 6 b
DC170-05-03.572A1- 3,572 9/64“ 23 66 28 36 6 b
DC170-05-03.600A1- 3,6 23 66 28 36 6 b
DC170-05-03.700A1- 3,7 23 66 28 36 6 b
DC170-05-03.800A1- 3,8 29 74 36 36 6 b
DC170-05-03.900A1- 3,9 29 74 36 36 6 b
DC170-05-03.969A1- 3,969 5/32“ 29 74 36 36 6 b
DC170-05-04.000A1- 4 29 74 36 36 6 b
DC170-05-04.100A1- 4,1 29 74 36 36 6 b
DC170-05-04.200A1- 4,2 29 74 36 36 6 b
DC170-05-04.300A1- 4,3 29 74 36 36 6 b
DC170-05-04.366A1- 4,366 11/64“ 29 74 36 36 6 b
DC170-05-04.400A1- 4,4 29 74 36 36 6 b
DC170-05-04.500A1- 4,5 29 74 36 36 6 b
DC170-05-04.600A1- 4,6 29 74 36 36 6 b
DC170-05-04.650A1- 4,65 29 74 36 36 6 b
DC170-05-04.700A1- 4,7 29 74 36 36 6 b
DC170-05-04.763A1- 4,763 3/16“ 35 82 44 36 6 b
DC170-05-04.800A1- 4,8 35 82 44 36 6 b
DC170-05-04.900A1- 4,9 35 82 44 36 6 b
DC170-05-05.000A1- 5 35 82 44 36 6 b
DC170-05-05.100A1- 5,1 35 82 44 36 6 b
DC170-05-05.159A1- 5,159 13/64“ 35 82 44 36 6 b
DC170-05-05.200A1- 5,2 35 82 44 36 6 b
DC170-05-05.300A1- 5,3 35 82 44 36 6 b
DC170-05-05.400A1- 5,4 35 82 44 36 6 b
DC170-05-05.500A1- 5,5 35 82 44 36 6 b
DC170-05-05.550A1- 5,55 35 82 44 36 6 b
DC170-05-05.556A1- 5,556 7/32“ 35 82 44 36 6 b
DC170-05-05.600A1- 5,6 35 82 44 36 6 b
DC170-05-05.700A1- 5,7 35 82 44 36 6 b
DC170-05-05.800A1- 5,8 35 82 44 36 6 b
DC170-05-05.900A1- 5,9 35 82 44 36 6 b
DC170-05-05.953A1- 5,953 15/64“ 35 82 44 36 6 b
DC170-05-06.000A1- 6 35 82 44 36 6 b
DC170-05-06.100A1- 6,1 43 91 53 36 8 b
DC170-05-06.200A1- 6,2 43 91 53 36 8 b
DC170-05-06.300A1- 6,3 43 91 53 36 8 b
DC170-05-06.350A1- 6,35 1/4“ 43 91 53 36 8 b
DC170-05-06.400A1- 6,4 43 91 53 36 8 b
DC170-05-06.500A1- 6,5 43 91 53 36 8 b
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-05-06.600A1- 6,6 43 91 53 36 8 b
DC170-05-06.700A1- 6,7 43 91 53 36 8 b
Dc d1
DC170-05-06.747A1- 6,747 17/64“ 43 91 53 36 8 b
DC170-05-06.800A1- 6,8 43 91 53 36 8 b
Lc
l2 l5
DC170-05-06.900A1- 6,9 43 91 53 36 8 b
l1 DC170-05-07.000A1- 7 43 91 53 36 8 b
DC170-05-07.100A1- 7,1 43 91 53 36 8 b
DC170-05-07.144A1- 7,144 9/32“ 43 91 53 36 8 b
DC170-05-07.200A1- 7,2 43 91 53 36 8 b
DC170-05-07.300A1- 7,3 43 91 53 36 8 b
DC170-05-07.400A1- 7,4 43 91 53 36 8 b
DC170-05-07.500A1- 7,5 43 91 53 36 8 b
DC170-05-07.541A1- 7,541 19/64“ 43 91 53 36 8 b
DC170-05-07.800A1- 7,8 43 91 53 36 8 b
DC170-05-07.900A1- 7,9 43 91 53 36 8 b
DC170-05-07.938A1- 7,938 5/16“ 43 91 53 36 8 b
DC170-05-08.000A1- 8 43 91 53 36 8 b
DC170-05-08.100A1- 8,1 49 103 61 40 10 b
DC170-05-08.200A1- 8,2 49 103 61 40 10 b
DC170-05-08.300A1- 8,3 49 103 61 40 10 b
DC170-05-08.334A1- 8,334 21/64“ 49 103 61 40 10 b
DC170-05-08.400A1- 8,4 49 103 61 40 10 b
DC170-05-08.500A1- 8,5 49 103 61 40 10 b
DC170-05-08.600A1- 8,6 49 103 61 40 10 b
DC170-05-08.700A1- 8,7 49 103 61 40 10 b
DC170-05-08.731A1- 8,731 11/32“ 49 103 61 40 10 b
DC170-05-08.800A1- 8,8 49 103 61 40 10 b
DC170-05-09.000A1- 9 49 103 61 40 10 b
DC170-05-09.128A1- 9,128 23/64“ 49 103 61 40 10 b
DC170-05-09.200A1- 9,2 49 103 61 40 10 b
DC170-05-09.300A1- 9,3 49 103 61 40 10 b
DC170-05-09.500A1- 9,5 49 103 61 40 10 b
DC170-05-09.525A1- 9,525 3/8“ 49 103 61 40 10 b
DC170-05-09.600A1- 9,6 49 103 61 40 10 b
DC170-05-09.700A1- 9,7 49 103 61 40 10 b
DC170-05-09.800A1- 9,8 49 103 61 40 10 b
DC170-05-09.900A1- 9,9 49 103 61 40 10 b
DC170-05-09.922A1- 9,922 25/64“ 49 103 61 40 10 b
DC170-05-10.000A1- 10 49 103 61 40 10 b
DC170-05-10.100A1- 10,1 56 118 71 45 12 b
DC170-05-10.200A1- 10,2 56 118 71 45 12 b
DC170-05-10.300A1- 10,3 56 118 71 45 12 b
DC170-05-10.319A1- 10,319 13/32“ 56 118 71 45 12 b
DC170-05-10.400A1- 10,4 56 118 71 45 12 b
DC170-05-10.500A1- 10,5 56 118 71 45 12 b
DC170-05-10.716A1- 10,716 27/64“ 56 118 71 45 12 b
DC170-05-10.800A1- 10,8 56 118 71 45 12 b
DC170-05-11.000A1- 11 56 118 71 45 12 b
DC170-05-11.100A1- 11,1 56 118 71 45 12 b
DC170-05-11.113A1- 11,113 7/16“ 56 118 71 45 12 b
DC170-05-11.200A1- 11,2 56 118 71 45 12 b
DC170-05-11.500A1- 11,5 56 118 71 45 12 b
DC170-05-11.509A1- 11,509 29/64“ 56 118 71 45 12 b
DC170-05-11.700A1- 11,7 56 118 71 45 12 b
DC170-05-11.800A1- 11,8 56 118 71 45 12 b
DC170-05-11.906A1- 11,906 15/32“ 56 118 71 45 12 b
DC170-05-12.000A1- 12 56 118 71 45 12 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 412 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-05-12.100A1- 12,1 60 124 77 45 14 b
DC170-05-12.200A1- 12,2 60 124 77 45 14 b
Dc d1
DC170-05-12.300A1- 12,3 60 124 77 45 14 b
DC170-05-12.303A1- 12,303 31/64“ 60 124 77 45 14 b
Lc
l2 l5
DC170-05-12.500A1- 12,5 60 124 77 45 14 b
l1 DC170-05-12.600A1- 12,6 60 124 77 45 14 b
DC170-05-12.700A1- 12,7 1/2“ 60 124 77 45 14 b
DC170-05-13.000A1- 13 60 124 77 45 14 b
DC170-05-13.300A1- 13,3 60 124 77 45 14 b
DC170-05-13.494A1- 13,494 17/32“ 60 124 77 45 14 b
DC170-05-13.500A1- 13,5 60 124 77 45 14 b
DC170-05-14.000A1- 14 60 124 77 45 14 b
DC170-05-14.288A1- 14,288 9/16“ 63 133 83 48 16 b
DC170-05-14.500A1- 14,5 63 133 83 48 16 b
DC170-05-15.000A1- 15 63 133 83 48 16 b
DC170-05-15.500A1- 15,5 63 133 83 48 16 b
DC170-05-15.875A1- 15,875 5/8“ 63 133 83 48 16 b
DC170-05-16.000A1- 16 63 133 83 48 16 b
DC170-05-16.500A1- 16,5 71 143 93 48 18 b
DC170-05-17.000A1- 17 71 143 93 48 18 b
DC170-05-17.500A1- 17,5 71 143 93 48 18 b
DC170-05-18.000A1- 18 71 143 93 48 18 b
DC170-05-18.500A1- 18,5 77 153 101 50 20 b
DC170-05-19.000A1- 19 77 153 101 50 20 b
DC170-05-19.050A1- 19,05 3/4“ 77 153 101 50 20 b
DC170-05-20.000A1- 20 77 153 101 50 20 b
XIII D1 B 412 B 430

Solid drilling
B1
Solid carbide micro drills with coolant-through
A3389AML
X·treme M
5×Dc
140°
P M K N S H O
AML CC CC CC CC CC C C
Dc d1
AML mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A3389AML-2 2 14 57 17 35 3
A3389AML-2.05 2,05 14 57 18 35 3
Dc
A3389AML-2.1 2,1 14 57 18 35 3
d1 A3389AML-2.15 2,15 15 57 19 34 3
Lc A3389AML-2.2 2,2 15 57 19 34 3
l2 l5
l1
A3389AML-2.25 2,25 16 59 20 35 3
A3389AML-2.3 2,3 16 59 20 35 3
A3389AML-2.35 2,35 16 59 20 35 3
A3389AML-3/32IN 2,381 3/32“ 16 59 20 35 3
A3389AML-2.4 2,4 16 59 20 35 3
A3389AML-2.45 2,45 17 59 21 34 3
A3389AML-2.5 2,5 17 59 21 34 3
A3389AML-2.55 2,55 18 62 22 36 3
A3389AML-2.6 2,6 18 62 22 36 3
A3389AML-2.65 2,65 18 62 23 36 3
A3389AML-2.7 2,7 18 62 23 36 3
A3389AML-2.75 2,75 19 62 24 35 3
A3389AML-7/64IN 2,778 7/64“ 19 62 24 35 3
A3389AML-2.8 2,8 19 62 24 35 3
A3389AML-2.85 2,85 20 62 25 34 3
A3389AML-2.9 2,9 20 62 25 34 3
A3389AML-2.95 2,95 20 62 25 34 3
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
A3389DPL
X·treme Plus
DIN
5×Dc 6537 L
140°
P M K N S H O
DPL CC CC CC CC CC CC C
Dc d1
Shank DIN 6535 HA A3389DPL-3 3 23 66 28 36 6
A3389DPL-3.1 3,1 23 66 28 36 6
Dc d1 A3389DPL-1/8IN 3,175 1/8“ 23 66 28 36 6
A3389DPL-3.2 3,2 23 66 28 36 6
Lc A3389DPL-3.25 3,25 22 66 28 36 6
l2 l5
l1 A3389DPL-3.3 3,3 23 66 28 36 6
A3389DPL-3.4 3,4 23 66 28 36 6
A3389DPL-3.5 3,5 23 66 28 36 6
A3389DPL-9/64IN 3,572 9/64“ 23 66 28 36 6
A3389DPL-3.6 3,6 23 66 28 36 6
A3389DPL-3.7 3,7 23 66 28 36 6
A3389DPL-3.8 3,8 29 74 36 36 6
A3389DPL-3.9 3,9 29 74 36 36 6
A3389DPL-5/32IN 3,969 5/32“ 29 74 36 36 6
A3389DPL-4 4 29 74 36 36 6
A3389DPL-4.1 4,1 29 74 36 36 6
A3389DPL-4.2 4,2 29 74 36 36 6
A3389DPL-4.3 4,3 29 74 36 36 6
A3389DPL-11/64IN 4,366 11/64“ 29 74 36 36 6
A3389DPL-4.4 4,4 29 74 36 36 6
A3389DPL-4.5 4,5 29 74 36 36 6
A3389DPL-4.6 4,6 29 74 36 36 6
A3389DPL-4.65 4,65 29 74 36 36 6
A3389DPL-4.7 4,7 29 74 36 36 6
A3389DPL-3/16IN 4,763 3/16“ 35 82 44 36 6
A3389DPL-4.8 4,8 35 82 44 36 6
A3389DPL-4.9 4,9 35 82 44 36 6
A3389DPL-5 5 35 82 44 36 6
A3389DPL-5.1 5,1 35 82 44 36 6
A3389DPL-13/64IN 5,159 13/64“ 35 82 44 36 6
A3389DPL-5.2 5,2 35 82 44 36 6
A3389DPL-5.3 5,3 35 82 44 36 6
A3389DPL-5.4 5,4 35 82 44 36 6
A3389DPL-5.5 5,5 35 82 44 36 6
A3389DPL-5.55 5,55 35 82 44 36 6
A3389DPL-7/32IN 5,556 7/32“ 35 82 44 36 6
A3389DPL-5.6 5,6 35 82 44 36 6
A3389DPL-5.7 5,7 35 82 44 36 6
A3389DPL-5.8 5,8 35 82 44 36 6
A3389DPL-5.9 5,9 35 82 44 36 6
A3389DPL-15/64IN 5,953 15/64“ 35 82 44 36 6
A3389DPL-6 6 35 82 44 36 6
A3389DPL-6.1 6,1 43 91 53 36 8
A3389DPL-6.2 6,2 43 91 53 36 8
A3389DPL-6.3 6,3 43 91 53 36 8
A3389DPL-1/4IN 6,35 1/4“ 43 91 53 36 8
A3389DPL-6.4 6,4 43 91 53 36 8
A3389DPL-6.5 6,5 43 91 53 36 8
Continued
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3389DPL-6.6 6,6 43 91 53 36 8
A3389DPL-6.7 6,7 43 91 53 36 8
Dc d1 A3389DPL-17/64IN 6,747 17/64“ 43 91 53 36 8
A3389DPL-6.8 6,8 43 91 53 36 8
Lc A3389DPL-6.9 6,9 43 91 53 36 8
l2 l5
l1 A3389DPL-7 7 43 91 53 36 8
A3389DPL-7.1 7,1 43 91 53 36 8
A3389DPL-9/32IN 7,144 9/32“ 43 91 53 36 8
A3389DPL-7.2 7,2 43 91 53 36 8
A3389DPL-7.3 7,3 43 91 53 36 8
A3389DPL-7.4 7,4 43 91 53 36 8
A3389DPL-7.5 7,5 43 91 53 36 8
A3389DPL-19/64IN 7,541 19/64“ 43 91 53 36 8
A3389DPL-7.55 7,55 41 91 53 36 8
A3389DPL-7.8 7,8 43 91 53 36 8
A3389DPL-7.9 7,9 43 91 53 36 8
A3389DPL-5/16IN 7,938 5/16“ 43 91 53 36 8
A3389DPL-8 8 43 91 53 36 8
A3389DPL-8.1 8,1 49 103 61 40 10
A3389DPL-8.2 8,2 49 103 61 40 10
A3389DPL-8.3 8,3 49 103 61 40 10
A3389DPL-21/64IN 8,334 21/64“ 49 103 61 40 10
A3389DPL-8.4 8,4 49 103 61 40 10
A3389DPL-8.5 8,5 49 103 61 40 10
A3389DPL-8.6 8,6 49 103 61 40 10
A3389DPL-8.7 8,7 49 103 61 40 10
A3389DPL-11/32IN 8,731 11/32“ 49 103 61 40 10
A3389DPL-8.75 8,75 46 103 61 40 10
A3389DPL-8.8 8,8 49 103 61 40 10
A3389DPL-9 9 49 103 61 40 10
A3389DPL-23/64IN 9,128 23/64“ 49 103 61 40 10
A3389DPL-9.2 9,2 49 103 61 40 10
A3389DPL-9.3 9,3 49 103 61 40 10
A3389DPL-9.5 9,5 49 103 61 40 10
A3389DPL-3/8IN 9,525 3/8“ 49 103 61 40 10
A3389DPL-9.6 9,6 49 103 61 40 10
A3389DPL-9.7 9,7 49 103 61 40 10
A3389DPL-9.8 9,8 49 103 61 40 10
A3389DPL-9.9 9,9 46 103 61 40 10
A3389DPL-25/64IN 9,922 25/64“ 49 103 61 40 10
A3389DPL-10 10 49 103 61 40 10
A3389DPL-10.1 10,1 56 118 71 45 12
A3389DPL-10.2 10,2 56 118 71 45 12
A3389DPL-10.3 10,3 56 118 71 45 12
A3389DPL-13/32IN 10,319 13/32“ 56 118 71 45 12
A3389DPL-10.4 10,4 56 118 71 45 12
A3389DPL-10.5 10,5 56 118 71 45 12
A3389DPL-27/64IN 10,716 27/64“ 56 118 71 45 12
A3389DPL-10.8 10,8 56 118 71 45 12
A3389DPL-11 11 56 118 71 45 12
A3389DPL-11.1 11,1 56 118 71 45 12
A3389DPL-7/16IN 11,113 7/16“ 56 118 71 45 12
A3389DPL-11.2 11,2 56 118 71 45 12
A3389DPL-11.3 11,3 53 118 71 45 12
A3389DPL-11.4 11,4 53 118 71 45 12
A3389DPL-11.5 11,5 56 118 71 45 12
A3389DPL-29/64IN 11,509 29/64“ 56 118 71 45 12
A3389DPL-11.7 11,7 56 118 71 45 12
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 412 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3389DPL-11.8 11,8 56 118 71 45 12
A3389DPL-15/32IN 11,906 15/32“ 56 118 71 45 12
Dc d1 A3389DPL-12 12 56 118 71 45 12
A3389DPL-12.1 12,1 60 124 77 45 14
Lc A3389DPL-12.2 12,2 60 124 77 45 14
l2 l5
l1 A3389DPL-12.3 12,3 60 124 77 45 14
A3389DPL-31/64IN 12,303 31/64“ 60 124 77 45 14
A3389DPL-12.5 12,5 60 124 77 45 14
A3389DPL-12.6 12,6 60 124 77 45 14
A3389DPL-1/2IN 12,7 1/2“ 60 124 77 45 14
A3389DPL-13 13 60 124 77 45 14
A3389DPL-13.1 13,1 63 124 77 45 14
A3389DPL-13.3 13,3 60 124 77 45 14
A3389DPL-17/32IN 13,494 17/32“ 60 124 77 45 14
A3389DPL-13.5 13,5 60 124 77 45 14
A3389DPL-14 14 60 124 77 45 14
A3389DPL-9/16IN 14,288 9/16“ 63 133 83 48 16
A3389DPL-14.5 14,5 63 133 83 48 16
A3389DPL-15 15 63 133 83 48 16
A3389DPL-15.1 15,1 67 133 83 48 16
A3389DPL-15.3 15,3 67 133 83 48 16
A3389DPL-15.5 15,5 63 133 83 48 16
A3389DPL-5/8IN 15,875 5/8“ 63 133 83 48 16
A3389DPL-16 16 63 133 83 48 16
A3389DPL-16.5 16,5 71 143 93 48 18
A3389DPL-17 17 71 143 93 48 18
A3389DPL-17.5 17,5 71 143 93 48 18
A3389DPL-18 18 71 143 93 48 18
A3389DPL-18.5 18,5 77 153 101 50 20
A3389DPL-19 19 77 153 101 50 20
A3389DPL-3/4IN 19,05 3/4“ 77 153 101 50 20
A3389DPL-20 20 77 153 101 50 20
XIII D1 B 412 B 430

Solid drilling
B1
A3393TTP
X·treme Inox
DIN
5×Dc 6537 L
140°
P M K N S H O
TTP C CC C CC C
Dc d1
Shank DIN 6535 HA A3393TTP-3 3 23 66 28 36 6
A3393TTP-3.1 3,1 23 66 28 36 6
Dc d1 A3393TTP-1/8IN 3,175 1/8“ 23 66 28 36 6
A3393TTP-3.2 3,2 23 66 28 36 6
Lc A3393TTP-3.25 3,25 23 66 28 36 6
l2 l5
l1 A3393TTP-3.3 3,3 23 66 28 36 6
A3393TTP-3.4 3,4 23 66 28 36 6
A3393TTP-3.5 3,5 23 66 28 36 6
A3393TTP-3.6 3,6 23 66 28 36 6
A3393TTP-3.7 3,7 23 66 28 36 6
A3393TTP-3.8 3,8 29 74 36 36 6
A3393TTP-3.9 3,9 29 74 36 36 6
A3393TTP-5/32IN 3,969 5/32“ 29 74 36 36 6
A3393TTP-4 4 29 74 36 36 6
A3393TTP-4.1 4,1 29 74 36 36 6
A3393TTP-4.2 4,2 29 74 36 36 6
A3393TTP-4.3 4,3 29 74 36 36 6
A3393TTP-11/64IN 4,365 11/64“ 23 74 36 36 6
A3393TTP-4.4 4,4 29 74 36 36 6
A3393TTP-4.5 4,5 29 74 36 36 6
A3393TTP-4.6 4,6 29 74 36 36 6
A3393TTP-4.65 4,65 29 74 36 36 6
A3393TTP-4.7 4,7 29 74 36 36 6
A3393TTP-3/16IN 4,763 3/16“ 35 82 44 36 6
A3393TTP-4.8 4,8 35 82 44 36 6
A3393TTP-4.9 4,9 35 82 44 36 6
A3393TTP-5 5 35 82 44 36 6
A3393TTP-5.1 5,1 35 82 44 36 6
A3393TTP-5.2 5,2 35 82 44 36 6
A3393TTP-5.3 5,3 35 82 44 36 6
A3393TTP-5.4 5,4 35 82 44 36 6
A3393TTP-5.5 5,5 35 82 44 36 6
A3393TTP-5.55 5,55 35 82 44 36 6
A3393TTP-7/32IN 5,556 7/32“ 35 82 44 36 6
A3393TTP-5.6 5,6 35 82 44 36 6
A3393TTP-5.7 5,7 35 82 44 36 6
A3393TTP-5.8 5,8 35 82 44 36 6
A3393TTP-5.9 5,9 35 82 44 36 6
A3393TTP-15/64IN 5,953 15/64“ 29 82 44 36 6
A3393TTP-6 6 35 82 44 36 6
A3393TTP-6.1 6,1 43 91 53 36 8
A3393TTP-6.2 6,2 43 91 53 36 8
A3393TTP-6.3 6,3 43 91 53 36 8
A3393TTP-1/4IN 6,35 1/4“ 43 91 53 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3393TTP-6.4 6,4 43 91 53 36 8
A3393TTP-6.5 6,5 43 91 53 36 8
Dc d1 A3393TTP-6.6 6,6 43 91 53 36 8
A3393TTP-6.7 6,7 43 91 53 36 8
Lc A3393TTP-6.8 6,8 43 91 53 36 8
l2 l5
l1 A3393TTP-6.9 6,9 43 91 53 36 8
A3393TTP-7 7 43 91 53 36 8
A3393TTP-7.1 7,1 43 91 53 36 8
A3393TTP-9/32IN 7,144 9/32“ 43 91 53 36 8
A3393TTP-7.2 7,2 43 91 53 36 8
A3393TTP-7.3 7,3 43 91 53 36 8
A3393TTP-7.4 7,4 43 91 53 36 8
A3393TTP-7.5 7,5 43 91 53 36 8
A3393TTP-7.6 7,6 43 91 53 36 8
A3393TTP-7.7 7,7 43 91 53 36 8
A3393TTP-7.8 7,8 43 91 53 36 8
A3393TTP-7.9 7,9 43 91 53 36 8
A3393TTP-5/16IN 7,938 5/16“ 43 91 53 36 8
A3393TTP-8 8 43 91 53 36 8
A3393TTP-8.1 8,1 49 103 61 40 10
A3393TTP-8.2 8,2 49 103 61 40 10
A3393TTP-8.3 8,3 49 103 61 40 10
A3393TTP-8.4 8,4 49 103 61 40 10
A3393TTP-8.5 8,5 49 103 61 40 10
A3393TTP-8.6 8,6 49 103 61 40 10
A3393TTP-8.7 8,7 49 103 61 40 10
A3393TTP-11/32IN 8,731 11/32“ 49 103 61 40 10
A3393TTP-8.8 8,8 49 103 61 40 10
A3393TTP-8.9 8,9 49 103 61 40 10
A3393TTP-9 9 49 103 61 40 10
A3393TTP-9.1 9,1 49 103 61 40 10
A3393TTP-23/64IN 9,128 23/64“ 49 103 61 40 10
A3393TTP-9.2 9,2 49 103 61 40 10
A3393TTP-9.3 9,3 49 103 61 40 10
A3393TTP-9.4 9,4 49 103 61 40 10
A3393TTP-9.5 9,5 49 103 61 40 10
A3393TTP-3/8IN 9,525 3/8“ 49 103 61 40 10
A3393TTP-9.6 9,6 49 103 61 40 10
A3393TTP-9.7 9,7 49 103 61 40 10
A3393TTP-9.8 9,8 49 103 61 40 10
A3393TTP-9.9 9,9 49 103 61 40 10
A3393TTP-25/64IN 9,921 25/64“ 49 103 61 40 10
A3393TTP-10 10 49 103 61 40 10
A3393TTP-10.1 10,1 56 118 71 45 12
A3393TTP-10.2 10,2 56 118 71 45 12
A3393TTP-10.3 10,3 56 118 71 45 12
A3393TTP-13/32IN 10,319 13/32“ 56 118 71 45 12
A3393TTP-10.4 10,4 56 118 71 45 12
A3393TTP-10.5 10,5 56 118 71 45 12
A3393TTP-10.6 10,6 56 118 71 45 12
A3393TTP-10.7 10,7 56 118 71 45 12
A3393TTP-10.8 10,8 56 118 71 45 12
A3393TTP-10.9 10,9 56 118 71 45 12
A3393TTP-11 11 56 118 71 45 12
A3393TTP-11.1 11,1 56 118 71 45 12
A3393TTP-7/16IN 11,113 7/16“ 56 118 71 45 12
A3393TTP-11.2 11,2 56 118 71 45 12
A3393TTP-11.3 11,3 56 118 71 45 12
A3393TTP-11.4 11,4 56 118 71 45 12
A3393TTP-11.5 11,5 56 118 71 45 12
A3393TTP-29/64IN 11,509 29/64“ 56 118 71 45 12
A3393TTP-11.6 11,6 56 118 71 45 12
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3393TTP-11.7 11,7 56 118 71 45 12
A3393TTP-11.8 11,8 56 118 71 45 12
Dc d1 A3393TTP-11.9 11,9 56 118 71 45 12
A3393TTP-15/32IN 11,906 15/32“ 56 118 71 45 12
Lc A3393TTP-12 12 56 118 71 45 12
l2 l5
l1 A3393TTP-12.2 12,2 60 124 77 45 14
A3393TTP-12.5 12,5 60 124 77 45 14
A3393TTP-1/2IN 12,7 1/2“ 60 124 77 45 14
A3393TTP-12.8 12,8 60 124 77 45 14
A3393TTP-13 13 60 124 77 45 14
A3393TTP-17/32IN 13,494 17/32“ 60 124 77 45 14
A3393TTP-13.5 13,5 60 124 77 45 14
A3393TTP-13.8 13,8 60 124 77 45 14
A3393TTP-14 14 60 124 77 45 14
A3393TTP-14.2 14,2 63 133 83 48 16
A3393TTP-9/16IN 14,288 9/16“ 63 133 83 48 16
A3393TTP-14.4 14,4 63 133 83 48 16
A3393TTP-14.5 14,5 63 133 83 48 16
A3393TTP-14.8 14,8 63 133 83 48 16
A3393TTP-15 15 63 133 83 48 16
A3393TTP-15.1 15,1 63 133 83 48 16
A3393TTP-15.5 15,5 63 133 83 48 16
A3393TTP-15.8 15,8 63 133 83 48 16
A3393TTP-5/8IN 15,875 5/8“ 63 133 83 48 16
A3393TTP-16 16 63 133 83 48 16
A3393TTP-16.5 16,5 71 143 93 48 18
A3393TTP-16.8 16,8 71 143 93 48 18
A3393TTP-17 17 71 143 93 48 18
A3393TTP-17.5 17,5 71 143 93 48 18
A3393TTP-17.8 17,8 71 143 93 48 18
A3393TTP-18 18 71 143 93 48 18
A3393TTP-18.5 18,5 77 153 101 50 20
A3393TTP-18.8 18,8 77 153 101 50 20
A3393TTP-19 19 77 153 101 50 20
A3393TTP-3/4IN 19,05 3/4“ 77 153 101 50 20
A3393TTP-19.5 19,5 77 153 101 50 20
A3393TTP-19.8 19,8 77 153 101 50 20
A3393TTP-20 20 77 153 101 50 20
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
A3382XPL
X·treme CI
DIN
5×Dc 6537 L
140°
P M K N S H O
XPL CC C
Dc d1
Shank DIN 6535 HA A3382XPL-3 3 23 66 28 36 6
A3382XPL-3.1 3,1 23 66 28 36 6
Dc d1
A3382XPL-1/8IN 3,175 1/8“ 23 66 28 36 6
A3382XPL-3.2 3,2 23 66 28 36 6
Lc A3382XPL-3.3 3,3 23 66 28 36 6
l2 l5
l1 A3382XPL-3.4 3,4 23 66 28 36 6
A3382XPL-3.5 3,5 23 66 28 36 6
A3382XPL-9/64IN 3,572 9/64“ 23 66 28 36 6
A3382XPL-3.6 3,6 23 66 28 36 6
A3382XPL-3.7 3,7 23 66 28 36 6
A3382XPL-3.8 3,8 29 74 36 36 6
A3382XPL-3.9 3,9 29 74 36 36 6
A3382XPL-5/32IN 3,969 5/32“ 29 74 36 36 6
A3382XPL-4 4 29 74 36 36 6
A3382XPL-4.1 4,1 29 74 36 36 6
A3382XPL-4.2 4,2 29 74 36 36 6
A3382XPL-4.3 4,3 29 74 36 36 6
A3382XPL-11/64IN 4,366 11/64“ 29 74 36 36 6
A3382XPL-4.4 4,4 29 74 36 36 6
A3382XPL-4.5 4,5 29 74 36 36 6
A3382XPL-4.6 4,6 29 74 36 36 6
A3382XPL-4.65 4,65 29 74 36 36 6
A3382XPL-4.7 4,7 29 74 36 36 6
A3382XPL-3/16IN 4,763 3/16“ 35 82 44 36 6
A3382XPL-4.8 4,8 35 82 44 36 6
A3382XPL-4.9 4,9 35 82 44 36 6
A3382XPL-5 5 35 82 44 36 6
A3382XPL-5.1 5,1 35 82 44 36 6
A3382XPL-13/64IN 5,159 13/64“ 35 82 44 36 6
A3382XPL-5.2 5,2 35 82 44 36 6
A3382XPL-5.3 5,3 35 82 44 36 6
A3382XPL-5.4 5,4 35 82 44 36 6
A3382XPL-5.5 5,5 35 82 44 36 6
A3382XPL-5.55 5,55 35 82 44 36 6
A3382XPL-7/32IN 5,556 7/32“ 35 82 44 36 6
A3382XPL-5.6 5,6 35 82 44 36 6
A3382XPL-5.7 5,7 35 82 44 36 6
A3382XPL-5.8 5,8 35 82 44 36 6
A3382XPL-5.9 5,9 35 82 44 36 6
A3382XPL-15/64IN 5,953 15/64“ 35 82 44 36 6
A3382XPL-6 6 35 82 44 36 6
A3382XPL-6.1 6,1 43 91 53 36 8
A3382XPL-6.2 6,2 43 91 53 36 8
A3382XPL-6.3 6,3 43 91 53 36 8
A3382XPL-1/4IN 6,35 1/4“ 43 91 53 36 8
A3382XPL-6.4 6,4 43 91 53 36 8
A3382XPL-6.5 6,5 43 91 53 36 8
A3382XPL-6.6 6,6 43 91 53 36 8
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3382XPL-6.7 6,7 43 91 53 36 8
A3382XPL-17/64IN 6,747 17/64“ 43 91 53 36 8
Dc d1
A3382XPL-6.8 6,8 43 91 53 36 8
A3382XPL-6.9 6,9 43 91 53 36 8
Lc A3382XPL-7 7 43 91 53 36 8
l2 l5
l1 A3382XPL-7.1 7,1 43 91 53 36 8
A3382XPL-9/32IN 7,144 9/32“ 43 91 53 36 8
A3382XPL-7.2 7,2 43 91 53 36 8
A3382XPL-7.3 7,3 43 91 53 36 8
A3382XPL-7.4 7,4 43 91 53 36 8
A3382XPL-7.5 7,5 43 91 53 36 8
A3382XPL-19/64IN 7,541 19/64“ 43 91 53 36 8
A3382XPL-7.8 7,8 43 91 53 36 8
A3382XPL-7.9 7,9 43 91 53 36 8
A3382XPL-5/16IN 7,938 5/16“ 43 91 53 36 8
A3382XPL-8 8 43 91 53 36 8
A3382XPL-8.1 8,1 49 103 61 40 10
A3382XPL-8.2 8,2 49 103 61 40 10
A3382XPL-8.3 8,3 49 103 61 40 10
A3382XPL-21/64IN 8,334 21/64“ 49 103 61 40 10
A3382XPL-8.4 8,4 49 103 61 40 10
A3382XPL-8.5 8,5 49 103 61 40 10
A3382XPL-8.6 8,6 49 103 61 40 10
A3382XPL-8.7 8,7 49 103 61 40 10
A3382XPL-11/32IN 8,731 11/32“ 49 103 61 40 10
A3382XPL-8.8 8,8 49 103 61 40 10
A3382XPL-9 9 49 103 61 40 10
A3382XPL-23/64IN 9,128 23/64“ 49 103 61 40 10
A3382XPL-9.2 9,2 49 103 61 40 10
A3382XPL-9.3 9,3 49 103 61 40 10
A3382XPL-9.5 9,5 49 103 61 40 10
A3382XPL-3/8IN 9,525 3/8“ 49 103 61 40 10
A3382XPL-9.6 9,6 49 103 61 40 10
A3382XPL-9.8 9,8 49 103 61 40 10
A3382XPL-25/64IN 9,922 25/64“ 49 103 61 40 10
A3382XPL-10 10 49 103 61 40 10
A3382XPL-10.1 10,1 56 118 71 45 12
A3382XPL-10.2 10,2 56 118 71 45 12
A3382XPL-10.3 10,3 56 118 71 45 12
A3382XPL-13/32IN 10,319 13/32“ 56 118 71 45 12
A3382XPL-10.4 10,4 56 118 71 45 12
A3382XPL-10.5 10,5 56 118 71 45 12
A3382XPL-27/64IN 10,716 27/64“ 56 118 71 45 12
A3382XPL-10.8 10,8 56 118 71 45 12
A3382XPL-11 11 56 118 71 45 12
A3382XPL-11.1 11,1 56 118 71 45 12
A3382XPL-7/16IN 11,113 7/16“ 56 118 71 45 12
A3382XPL-11.2 11,2 56 118 71 45 12
A3382XPL-11.5 11,5 56 118 71 45 12
A3382XPL-29/64IN 11,509 29/64“ 56 118 71 45 12
A3382XPL-11.7 11,7 56 118 71 45 12
A3382XPL-11.8 11,8 56 118 71 45 12
A3382XPL-15/32IN 11,906 15/32“ 56 118 71 45 12
A3382XPL-12 12 56 118 71 45 12
A3382XPL-12.1 12,1 60 124 77 45 14
A3382XPL-12.2 12,2 60 124 77 45 14
A3382XPL-12.3 12,3 60 124 77 45 14
A3382XPL-31/64IN 12,303 31/64“ 60 124 77 45 14
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3382XPL-12.5 12,5 60 124 77 45 14
A3382XPL-12.6 12,6 60 124 77 45 14
Dc d1
A3382XPL-1/2IN 12,7 1/2“ 60 124 77 45 14
A3382XPL-13 13 60 124 77 45 14
Lc A3382XPL-13.3 13,3 60 124 77 45 14
l2 l5
l1 A3382XPL-17/32IN 13,494 17/32“ 60 124 77 45 14
A3382XPL-13.5 13,5 60 124 77 45 14
A3382XPL-14 14 60 124 77 45 14
A3382XPL-9/16IN 14,288 9/16“ 63 133 83 48 16
A3382XPL-14.5 14,5 63 133 83 48 16
A3382XPL-15 15 63 133 83 48 16
A3382XPL-15.3 15,3 63 133 83 48 16
A3382XPL-15.5 15,5 63 133 83 48 16
A3382XPL-5/8IN 15,875 5/8“ 63 133 83 48 16
A3382XPL-16 16 63 133 83 48 16
A3382XPL-16.5 16,5 71 143 93 48 18
A3382XPL-17 17 71 143 93 48 18
A3382XPL-17.5 17,5 71 143 93 48 18
A3382XPL-18 18 71 143 93 48 18
A3382XPL-18.5 18,5 77 153 101 50 20
A3382XPL-19 19 77 153 101 50 20
A3382XPL-3/4IN 19,05 3/4“ 77 153 101 50 20
A3382XPL-20 20 77 153 101 50 20
XIII D1 B 414 B 430

Solid drilling
B1
A3399XPL / A3999XPL
X·treme
DIN
5×Dc 6537 L
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A3399XPL-3 3 23 66 28 36 6
A3399XPL-3.1 3,1 23 66 28 36 6
Dc d1 A3399XPL-1/8IN 3,175 1/8“ 23 66 28 36 6
A3399XPL-3.2 3,2 23 66 28 36 6
Lc A3399XPL-3.25 3,25 23 66 28 36 6
l2 l5
l1 A3399XPL-3.3 3,3 23 66 28 36 6
A3399XPL-3.4 3,4 23 66 28 36 6
A3399XPL-3.5 3,5 23 66 28 36 6
A3399XPL-9/64IN 3,572 9/64“ 23 66 28 36 6
A3399XPL-3.6 3,6 23 66 28 36 6
A3399XPL-3.65 3,65 23 66 28 36 6
A3399XPL-3.7 3,7 23 66 28 36 6
A3399XPL-3.8 3,8 29 74 36 36 6
A3399XPL-3.9 3,9 29 74 36 36 6
A3399XPL-5/32IN 3,969 5/32“ 29 74 36 36 6
A3399XPL-4 4 29 74 36 36 6
A3399XPL-4.1 4,1 29 74 36 36 6
A3399XPL-4.2 4,2 29 74 36 36 6
A3399XPL-4.3 4,3 29 74 36 36 6
A3399XPL-11/64IN 4,366 11/64“ 29 74 36 36 6
A3399XPL-4.4 4,4 29 74 36 36 6
A3399XPL-4.5 4,5 29 74 36 36 6
A3399XPL-4.6 4,6 29 74 36 36 6
A3399XPL-4.65 4,65 29 74 36 36 6
A3399XPL-4.7 4,7 29 74 36 36 6
A3399XPL-3/16IN 4,763 3/16“ 35 82 44 36 6
A3399XPL-4.8 4,8 35 82 44 36 6
A3399XPL-4.9 4,9 35 82 44 36 6
A3399XPL-5 5 35 82 44 36 6
A3399XPL-5.1 5,1 35 82 44 36 6
A3399XPL-13/64IN 5,159 13/64“ 35 82 44 36 6
A3399XPL-5.2 5,2 35 82 44 36 6
A3399XPL-5.3 5,3 35 82 44 36 6
A3399XPL-5.4 5,4 35 82 44 36 6
A3399XPL-5.5 5,5 35 82 44 36 6
A3399XPL-5.55 5,55 35 82 44 36 6
A3399XPL-7/32IN 5,556 7/32“ 35 82 44 36 6
A3399XPL-5.6 5,6 35 82 44 36 6
A3399XPL-5.7 5,7 35 82 44 36 6
A3399XPL-5.8 5,8 35 82 44 36 6
A3399XPL-5.9 5,9 35 82 44 36 6
A3399XPL-15/64IN 5,953 15/64“ 35 82 44 36 6
A3399XPL-6 6 35 82 44 36 6
A3399XPL-6.1 6,1 43 91 53 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3399XPL-6.2 6,2 43 91 53 36 8
A3399XPL-6.3 6,3 43 91 53 36 8
Dc d1 A3399XPL-1/4IN 6,35 1/4“ 43 91 53 36 8
A3399XPL-6.4 6,4 43 91 53 36 8
Lc A3399XPL-6.5 6,5 43 91 53 36 8
l2 l5
l1 A3399XPL-6.6 6,6 43 91 53 36 8
A3399XPL-6.7 6,7 43 91 53 36 8
A3399XPL-17/64IN 6,747 17/64“ 43 91 53 36 8
A3399XPL-6.8 6,8 43 91 53 36 8
A3399XPL-6.9 6,9 43 91 53 36 8
A3399XPL-7 7 43 91 53 36 8
A3399XPL-7.1 7,1 43 91 53 36 8
A3399XPL-9/32IN 7,144 9/32“ 43 91 53 36 8
A3399XPL-7.2 7,2 43 91 53 36 8
A3399XPL-7.3 7,3 43 91 53 36 8
A3399XPL-7.4 7,4 43 91 53 36 8
A3399XPL-7.5 7,5 43 91 53 36 8
A3399XPL-19/64IN 7,541 19/64“ 43 91 53 36 8
A3399XPL-7.55 7,55 43 91 53 36 8
A3399XPL-7.6 7,6 43 91 53 36 8
A3399XPL-7.7 7,7 43 91 53 36 8
A3399XPL-7.8 7,8 43 91 53 36 8
A3399XPL-7.9 7,9 43 91 53 36 8
A3399XPL-5/16IN 7,938 5/16“ 43 91 53 36 8
A3399XPL-8 8 43 91 53 36 8
A3399XPL-8.1 8,1 49 103 61 40 10
A3399XPL-8.2 8,2 49 103 61 40 10
A3399XPL-8.3 8,3 49 103 61 40 10
A3399XPL-21/64IN 8,334 21/64“ 49 103 61 40 10
A3399XPL-8.4 8,4 49 103 61 40 10
A3399XPL-8.5 8,5 49 103 61 40 10
A3399XPL-8.6 8,6 49 103 61 40 10
A3399XPL-8.7 8,7 49 103 61 40 10
A3399XPL-11/32IN 8,731 11/32“ 49 103 61 40 10
A3399XPL-8.8 8,8 49 103 61 40 10
A3399XPL-8.9 8,9 49 103 61 40 10
A3399XPL-9 9 49 103 61 40 10
A3399XPL-9.1 9,1 49 103 61 40 10
A3399XPL-23/64IN 9,128 23/64“ 49 103 61 40 10
A3399XPL-9.2 9,2 49 103 61 40 10
A3399XPL-9.3 9,3 49 103 61 40 10
A3399XPL-9.4 9,4 49 103 61 40 10
A3399XPL-9.5 9,5 49 103 61 40 10
A3399XPL-3/8IN 9,525 3/8“ 49 103 61 40 10
A3399XPL-9.55 9,55 49 103 61 40 10
A3399XPL-9.6 9,6 49 103 61 40 10
A3399XPL-9.7 9,7 49 103 61 40 10
A3399XPL-9.8 9,8 49 103 61 40 10
A3399XPL-9.9 9,9 49 103 61 40 10
A3399XPL-25/64IN 9,922 25/64“ 49 103 61 40 10
A3399XPL-10 10 49 103 61 40 10
A3399XPL-10.1 10,1 56 118 71 45 12
A3399XPL-10.2 10,2 56 118 71 45 12
A3399XPL-10.3 10,3 56 118 71 45 12
A3399XPL-13/32IN 10,319 13/32“ 56 118 71 45 12
A3399XPL-10.4 10,4 56 118 71 45 12
A3399XPL-10.5 10,5 56 118 71 45 12
A3399XPL-10.6 10,6 56 118 71 45 12
A3399XPL-10.7 10,7 56 118 71 45 12
A3399XPL-27/64IN 10,716 27/64“ 56 118 71 45 12
A3399XPL-10.8 10,8 56 118 71 45 12
A3399XPL-10.9 10,9 56 118 71 45 12
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3399XPL-11 11 56 118 71 45 12
A3399XPL-11.1 11,1 56 118 71 45 12
Dc d1 A3399XPL-7/16IN 11,113 7/16“ 56 118 71 45 12
A3399XPL-11.2 11,2 56 118 71 45 12
Lc A3399XPL-11.3 11,3 56 118 71 45 12
l2 l5
l1 A3399XPL-11.4 11,4 56 118 71 45 12
A3399XPL-11.5 11,5 56 118 71 45 12
A3399XPL-29/64IN 11,509 29/64“ 56 118 71 45 12
A3399XPL-11.55 11,55 56 118 71 45 12
A3399XPL-11.6 11,6 56 118 71 45 12
A3399XPL-11.7 11,7 56 118 71 45 12
A3399XPL-11.8 11,8 56 118 71 45 12
A3399XPL-11.9 11,9 56 118 71 45 12
A3399XPL-15/32IN 11,906 15/32“ 56 118 71 45 12
A3399XPL-12 12 56 118 71 45 12
A3399XPL-12.1 12,1 60 124 77 45 14
A3399XPL-12.2 12,2 60 124 77 45 14
A3399XPL-12.25 12,25 60 124 77 45 14
A3399XPL-12.3 12,3 60 124 77 45 14
A3399XPL-31/64IN 12,303 31/64“ 60 124 77 45 14
A3399XPL-12.4 12,4 60 124 77 45 14
A3399XPL-12.5 12,5 60 124 77 45 14
A3399XPL-12.6 12,6 60 124 77 45 14
A3399XPL-1/2IN 12,7 1/2“ 60 124 77 45 14
A3399XPL-12.8 12,8 60 124 77 45 14
A3399XPL-12.9 12,9 60 124 77 45 14
A3399XPL-13 13 60 124 77 45 14
A3399XPL-13.1 13,1 60 124 77 45 14
A3399XPL-13.2 13,2 60 124 77 45 14
A3399XPL-13.3 13,3 60 124 77 45 14
A3399XPL-13.4 13,4 60 124 77 45 14
A3399XPL-17/32IN 13,494 17/32“ 60 124 77 45 14
A3399XPL-13.5 13,5 60 124 77 45 14
A3399XPL-13.6 13,6 60 124 77 45 14
A3399XPL-13.7 13,7 60 124 77 45 14
A3399XPL-13.8 13,8 60 124 77 45 14
A3399XPL-13.9 13,9 60 124 77 45 14
A3399XPL-14 14 60 124 77 45 14
A3399XPL-14.1 14,1 63 133 83 48 16
A3399XPL-14.2 14,2 63 133 83 48 16
A3399XPL-9/16IN 14,288 9/16“ 63 133 83 48 16
A3399XPL-14.3 14,3 63 133 83 48 16
A3399XPL-14.4 14,4 63 133 83 48 16
A3399XPL-14.5 14,5 63 133 83 48 16
A3399XPL-14.6 14,6 63 133 83 48 16
A3399XPL-14.7 14,7 63 133 83 48 16
A3399XPL-14.75 14,75 63 133 83 48 16
A3399XPL-14.8 14,8 63 133 83 48 16
A3399XPL-14.9 14,9 63 133 83 48 16
A3399XPL-15 15 63 133 83 48 16
A3399XPL-15.1 15,1 63 133 83 48 16
A3399XPL-15.2 15,2 63 133 83 48 16
A3399XPL-15.3 15,3 63 133 83 48 16
A3399XPL-15.4 15,4 63 133 83 48 16
A3399XPL-15.5 15,5 63 133 83 48 16
A3399XPL-15.6 15,6 63 133 83 48 16
A3399XPL-15.7 15,7 63 133 83 48 16
A3399XPL-15.8 15,8 63 133 83 48 16
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3399XPL-5/8IN 15,875 5/8“ 63 133 83 48 16
A3399XPL-16 16 63 133 83 48 16
Dc d1 A3399XPL-16.1 16,1 71 143 93 48 18
A3399XPL-16.2 16,2 71 143 93 48 18
Lc A3399XPL-16.3 16,3 71 143 93 48 18
l2 l5
l1 A3399XPL-16.5 16,5 71 143 93 48 18
A3399XPL-16.6 16,6 71 143 93 48 18
A3399XPL-16.7 16,7 71 143 93 48 18
A3399XPL-16.75 16,75 71 143 93 48 18
A3399XPL-16.8 16,8 71 143 93 48 18
A3399XPL-17 17 71 143 93 48 18
A3399XPL-17.1 17,1 71 143 93 48 18
A3399XPL-17.3 17,3 71 143 93 48 18
A3399XPL-17.4 17,4 71 143 93 48 18
A3399XPL-17.5 17,5 71 143 93 48 18
A3399XPL-17.6 17,6 71 143 93 48 18
A3399XPL-17.7 17,7 71 143 93 48 18
A3399XPL-17.8 17,8 71 143 93 48 18
A3399XPL-17.9 17,9 71 143 93 48 18
A3399XPL-18 18 71 143 93 48 18
A3399XPL-18.1 18,1 77 153 101 50 20
A3399XPL-18.2 18,2 77 153 101 50 20
A3399XPL-18.4 18,4 77 153 101 50 20
A3399XPL-18.5 18,5 77 153 101 50 20
A3399XPL-18.6 18,6 77 153 101 50 20
A3399XPL-18.7 18,7 77 153 101 50 20
A3399XPL-18.9 18,9 77 153 101 50 20
A3399XPL-19 19 77 153 101 50 20
A3399XPL-3/4IN 19,05 3/4“ 77 153 101 50 20
A3399XPL-19.1 19,1 77 153 101 50 20
A3399XPL-19.3 19,3 77 153 101 50 20
A3399XPL-19.4 19,4 77 153 101 50 20
A3399XPL-19.5 19,5 77 153 101 50 20
A3399XPL-19.6 19,6 77 153 101 50 20
A3399XPL-19.7 19,7 77 153 101 50 20
A3399XPL-19.8 19,8 77 153 101 50 20
A3399XPL-19.9 19,9 77 153 101 50 20
A3399XPL-20 20 77 153 101 50 20
A3399XPL-20.5 20,5 86 166 108 56 25
A3399XPL-21 21 86 166 108 56 25
A3399XPL-21.5 21,5 86 166 108 56 25
A3399XPL-22 22 86 166 108 56 25
A3399XPL-22.5 22,5 91 173 115 56 25
A3399XPL-23 23 91 173 115 56 25
A3399XPL-23.5 23,5 91 173 115 56 25
A3399XPL-24 24 91 173 115 56 25
A3399XPL-25 25 97 180 122 56 25
Shank DIN 6535 HE A3999XPL-3 3 23 66 28 36 6
A3999XPL-3.1 3,1 23 66 28 36 6
Dc d1 A3999XPL-3.2 3,2 23 66 28 36 6
A3999XPL-3.25 3,25 23 66 28 36 6
Lc A3999XPL-3.3 3,3 23 66 28 36 6
l2 l5
l1 A3999XPL-3.4 3,4 23 66 28 36 6
A3999XPL-3.5 3,5 23 66 28 36 6
A3999XPL-3.6 3,6 23 66 28 36 6
A3999XPL-3.7 3,7 23 66 28 36 6
A3999XPL-3.8 3,8 29 74 36 36 6
A3999XPL-3.9 3,9 29 74 36 36 6
A3999XPL-4 4 29 74 36 36 6
A3999XPL-4.1 4,1 29 74 36 36 6
A3999XPL-4.2 4,2 29 74 36 36 6
A3999XPL-4.3 4,3 29 74 36 36 6
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3999XPL-4.4 4,4 29 74 36 36 6
A3999XPL-4.5 4,5 29 74 36 36 6
Dc d1 A3999XPL-4.6 4,6 29 74 36 36 6
A3999XPL-4.65 4,65 29 74 36 36 6
Lc A3999XPL-4.7 4,7 29 74 36 36 6
l2 l5
l1 A3999XPL-4.8 4,8 35 82 44 36 6
A3999XPL-4.9 4,9 35 82 44 36 6
A3999XPL-5 5 35 82 44 36 6
A3999XPL-5.1 5,1 35 82 44 36 6
A3999XPL-5.2 5,2 35 82 44 36 6
A3999XPL-5.3 5,3 35 82 44 36 6
A3999XPL-5.4 5,4 35 82 44 36 6
A3999XPL-5.5 5,5 35 82 44 36 6
A3999XPL-5.55 5,55 35 82 44 36 6
A3999XPL-5.6 5,6 35 82 44 36 6
A3999XPL-5.7 5,7 35 82 44 36 6
A3999XPL-5.8 5,8 35 82 44 36 6
A3999XPL-5.9 5,9 35 82 44 36 6
A3999XPL-6 6 35 82 44 36 6
A3999XPL-6.1 6,1 43 91 53 36 8
A3999XPL-6.2 6,2 43 91 53 36 8
A3999XPL-6.3 6,3 43 91 53 36 8
A3999XPL-6.4 6,4 43 91 53 36 8
A3999XPL-6.5 6,5 43 91 53 36 8
A3999XPL-6.6 6,6 43 91 53 36 8
A3999XPL-6.7 6,7 43 91 53 36 8
A3999XPL-6.8 6,8 43 91 53 36 8
A3999XPL-6.9 6,9 43 91 53 36 8
A3999XPL-7 7 43 91 53 36 8
A3999XPL-7.1 7,1 43 91 53 36 8
A3999XPL-7.2 7,2 43 91 53 36 8
A3999XPL-7.3 7,3 43 91 53 36 8
A3999XPL-7.4 7,4 43 91 53 36 8
A3999XPL-7.5 7,5 43 91 53 36 8
A3999XPL-7.6 7,6 43 91 53 36 8
A3999XPL-7.7 7,7 43 91 53 36 8
A3999XPL-7.8 7,8 43 91 53 36 8
A3999XPL-7.9 7,9 43 91 53 36 8
A3999XPL-8 8 43 91 53 36 8
A3999XPL-8.1 8,1 49 103 61 40 10
A3999XPL-8.2 8,2 49 103 61 40 10
A3999XPL-8.3 8,3 49 103 61 40 10
A3999XPL-8.4 8,4 49 103 61 40 10
A3999XPL-8.5 8,5 49 103 61 40 10
A3999XPL-8.6 8,6 49 103 61 40 10
A3999XPL-8.7 8,7 49 103 61 40 10
A3999XPL-8.8 8,8 49 103 61 40 10
A3999XPL-8.9 8,9 49 103 61 40 10
A3999XPL-9 9 49 103 61 40 10
A3999XPL-9.1 9,1 49 103 61 40 10
A3999XPL-9.2 9,2 49 103 61 40 10
A3999XPL-9.3 9,3 49 103 61 40 10
A3999XPL-9.5 9,5 49 103 61 40 10
A3999XPL-9.55 9,55 49 103 61 40 10
A3999XPL-9.6 9,6 49 103 61 40 10
A3999XPL-9.7 9,7 49 103 61 40 10
A3999XPL-9.8 9,8 49 103 61 40 10
A3999XPL-9.9 9,9 49 103 61 40 10
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3999XPL-10 10 49 103 61 40 10
A3999XPL-10.1 10,1 56 118 71 45 12
Dc d1 A3999XPL-10.2 10,2 56 118 71 45 12
A3999XPL-10.3 10,3 56 118 71 45 12
Lc A3999XPL-10.4 10,4 56 118 71 45 12
l2 l5
l1 A3999XPL-10.5 10,5 56 118 71 45 12
A3999XPL-10.6 10,6 56 118 71 45 12
A3999XPL-10.7 10,7 56 118 71 45 12
A3999XPL-10.8 10,8 56 118 71 45 12
A3999XPL-10.9 10,9 56 118 71 45 12
A3999XPL-11 11 56 118 71 45 12
A3999XPL-11.1 11,1 56 118 71 45 12
A3999XPL-11.2 11,2 56 118 71 45 12
A3999XPL-11.3 11,3 56 118 71 45 12
A3999XPL-11.4 11,4 56 118 71 45 12
A3999XPL-11.5 11,5 56 118 71 45 12
A3999XPL-11.55 11,55 56 118 71 45 12
A3999XPL-11.6 11,6 56 118 71 45 12
A3999XPL-11.7 11,7 56 118 71 45 12
A3999XPL-11.8 11,8 56 118 71 45 12
A3999XPL-11.9 11,9 56 118 71 45 12
A3999XPL-12 12 56 118 71 45 12
A3999XPL-12.1 12,1 60 124 77 45 14
A3999XPL-12.2 12,2 60 124 77 45 14
A3999XPL-12.25 12,25 60 124 77 45 14
A3999XPL-12.3 12,3 60 124 77 45 14
A3999XPL-12.4 12,4 60 124 77 45 14
A3999XPL-12.5 12,5 60 124 77 45 14
A3999XPL-12.6 12,6 60 124 77 45 14
A3999XPL-12.7 12,7 1/2“ 60 124 77 45 14
A3999XPL-12.75 12,75 60 124 77 45 14
A3999XPL-12.8 12,8 60 124 77 45 14
A3999XPL-12.9 12,9 60 124 77 45 14
A3999XPL-13 13 60 124 77 45 14
A3999XPL-13.1 13,1 60 124 77 45 14
A3999XPL-13.2 13,2 60 124 77 45 14
A3999XPL-13.3 13,3 60 124 77 45 14
A3999XPL-13.4 13,4 60 124 77 45 14
A3999XPL-13.5 13,5 60 124 77 45 14
A3999XPL-13.6 13,6 60 124 77 45 14
A3999XPL-13.8 13,8 60 124 77 45 14
A3999XPL-13.9 13,9 60 124 77 45 14
A3999XPL-14 14 60 124 77 45 14
A3999XPL-14.1 14,1 63 133 83 48 16
A3999XPL-14.2 14,2 63 133 83 48 16
A3999XPL-14.3 14,3 63 133 83 48 16
A3999XPL-14.5 14,5 63 133 83 48 16
A3999XPL-14.6 14,6 63 133 83 48 16
A3999XPL-14.7 14,7 63 133 83 48 16
A3999XPL-14.75 14,75 63 133 83 48 16
A3999XPL-14.8 14,8 63 133 83 48 16
A3999XPL-14.9 14,9 63 133 83 48 16
A3999XPL-15 15 63 133 83 48 16
A3999XPL-15.1 15,1 63 133 83 48 16
A3999XPL-15.2 15,2 63 133 83 48 16
A3999XPL-15.4 15,4 63 133 83 48 16
A3999XPL-15.5 15,5 63 133 83 48 16
A3999XPL-15.6 15,6 63 133 83 48 16
A3999XPL-15.7 15,7 63 133 83 48 16
A3999XPL-15.8 15,8 63 133 83 48 16
A3999XPL-15.9 15,9 63 133 83 48 16
A3999XPL-16 16 63 133 83 48 16
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3999XPL-16.3 16,3 71 143 93 48 18
A3999XPL-16.4 16,4 71 143 93 48 18
Dc d1 A3999XPL-16.5 16,5 71 143 93 48 18
A3999XPL-16.6 16,6 71 143 93 48 18
Lc A3999XPL-16.7 16,7 71 143 93 48 18
l2 l5
l1 A3999XPL-16.75 16,75 71 143 93 48 18
A3999XPL-16.8 16,8 71 143 93 48 18
A3999XPL-16.9 16,9 71 143 93 48 18
A3999XPL-17 17 71 143 93 48 18
A3999XPL-17.1 17,1 71 143 93 48 18
A3999XPL-17.4 17,4 71 143 93 48 18
A3999XPL-17.5 17,5 71 143 93 48 18
A3999XPL-17.6 17,6 71 143 93 48 18
A3999XPL-17.7 17,7 71 143 93 48 18
A3999XPL-17.9 17,9 71 143 93 48 18
A3999XPL-18 18 71 143 93 48 18
A3999XPL-18.2 18,2 77 153 101 50 20
A3999XPL-18.3 18,3 77 153 101 50 20
A3999XPL-18.4 18,4 77 153 101 50 20
A3999XPL-18.5 18,5 77 153 101 50 20
A3999XPL-18.6 18,6 77 153 101 50 20
A3999XPL-18.7 18,7 77 153 101 50 20
A3999XPL-18.8 18,8 77 153 101 50 20
A3999XPL-18.9 18,9 77 153 101 50 20
A3999XPL-19 19 77 153 101 50 20
A3999XPL-19.1 19,1 77 153 101 50 20
A3999XPL-19.2 19,2 77 153 101 50 20
A3999XPL-19.3 19,3 77 153 101 50 20
A3999XPL-19.4 19,4 77 153 101 50 20
A3999XPL-19.5 19,5 77 153 101 50 20
A3999XPL-19.6 19,6 77 153 101 50 20
A3999XPL-19.7 19,7 77 153 101 50 20
A3999XPL-19.8 19,8 77 153 101 50 20
A3999XPL-19.9 19,9 77 153 101 50 20
A3999XPL-20 20 77 153 101 50 20
A3999XPL-21 21 86 166 108 56 25
A3999XPL-21.5 21,5 86 166 108 56 25
A3999XPL-22 22 86 166 108 56 25
A3999XPL-22.5 22,5 91 173 115 56 25
A3999XPL-23 23 91 173 115 56 25
A3999XPL-23.5 23,5 91 173 115 56 25
A3999XPL-24 24 91 173 115 56 25
A3999XPL-24.5 24,5 97 180 122 56 25
A3999XPL-25 25 97 180 122 56 25
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Solid carbide drills with coolant-through, straight-fluted
A3387
Alpha® Jet
DIN
5×Dc 6537 L
120°
P M K N S H O
Uncoated C C C
Dc d1
Designation k6 Lc l1 l2 l5 h6
Uncoated mm mm mm mm mm mm
Shank DIN 6535 HA A3387-4 4 21 74 36 36 6
A3387-4.2 4,2 21 74 36 36 6
A3387-5 5 26 82 44 36 6
Dc d1
A3387-5.5 5,5 26 82 44 36 6
Lc A3387-6 6 26 82 44 36 6
l2 l5 A3387-6.5 6,5 32 91 53 36 8
l1
A3387-6.8 6,8 32 91 53 36 8
A3387-7 7 32 91 53 36 8
A3387-7.5 7,5 33 91 53 36 8
A3387-8 8 33 91 53 36 8
A3387-8.5 8,5 41 103 61 40 10
A3387-9 9 41 103 61 40 10
A3387-10 10 41 103 61 40 10
A3387-10.2 10,2 47 118 71 45 12
A3387-10.5 10,5 47 118 71 45 12
A3387-11 11 47 118 71 45 12
A3387-11.5 11,5 47 118 71 45 12
A3387-12 12 47 118 71 45 12
A3387-12.5 12,5 49 124 77 45 14
A3387-13 13 49 124 77 45 14
A3387-14 14 49 124 77 45 14
A3387-15 15 59 133 83 48 16
A3387-15.5 15,5 59 133 83 48 16
A3387-16 16 59 133 83 48 16
A3387-17 17 66 143 93 48 18
A3387-17.5 17,5 66 143 93 48 18
A3387-18 18 66 143 93 48 18
A3387-19.5 19,5 71 153 101 50 20
A3387-20 20 71 153 101 50 20
XIII D1 B 414 B 430

Solid drilling
B1
DC150 Perform
DIN
5×Dc 6537 L
140°
P M K N S H O
WJ30RE CC C CC CC CC C C
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-05-03.000A1- 3 23 66 28 36 6 b
DC150-05-03.100A1- 3,1 23 66 28 36 6 b
Dc d1
DC150-05-03.175A1- 3,175 1/8“ 23 66 28 36 6 b
DC150-05-03.200A1- 3,2 23 66 28 36 6 b
Lc
l2 l5
DC150-05-03.250A1- 3,25 23 66 28 36 6 b
l1 DC150-05-03.300A1- 3,3 23 66 28 36 6 b
DC150-05-03.400A1- 3,4 23 66 28 36 6 b
DC150-05-03.500A1- 3,5 23 66 28 36 6 b
DC150-05-03.572A1- 3,572 9/64“ 23 66 28 36 6 b
DC150-05-03.600A1- 3,6 23 66 28 36 6 b
DC150-05-03.650A1- 3,65 23 66 28 36 6 b
DC150-05-03.700A1- 3,7 23 66 28 36 6 b
DC150-05-03.800A1- 3,8 29 74 36 36 6 b
DC150-05-03.900A1- 3,9 29 74 36 36 6 b
DC150-05-03.969A1- 3,969 5/32“ 29 74 36 36 6 b
DC150-05-04.000A1- 4 29 74 36 36 6 b
DC150-05-04.100A1- 4,1 29 74 36 36 6 b
DC150-05-04.200A1- 4,2 29 74 36 36 6 b
DC150-05-04.300A1- 4,3 29 74 36 36 6 b
DC150-05-04.366A1- 4,366 11/64“ 29 74 36 36 6 b
DC150-05-04.400A1- 4,4 29 74 36 36 6 b
DC150-05-04.500A1- 4,5 29 74 36 36 6 b
DC150-05-04.600A1- 4,6 29 74 36 36 6 b
DC150-05-04.650A1- 4,65 29 74 36 36 6 b
DC150-05-04.700A1- 4,7 29 74 36 36 6 b
DC150-05-04.763A1- 4,763 3/16“ 35 82 44 36 6 b
DC150-05-04.800A1- 4,8 35 82 44 36 6 b
DC150-05-04.900A1- 4,9 35 82 44 36 6 b
DC150-05-05.000A1- 5 35 82 44 36 6 b
DC150-05-05.100A1- 5,1 35 82 44 36 6 b
DC150-05-05.159A1- 5,159 13/64“ 35 82 44 36 6 b
DC150-05-05.200A1- 5,2 35 82 44 36 6 b
DC150-05-05.300A1- 5,3 35 82 44 36 6 b
DC150-05-05.400A1- 5,4 35 82 44 36 6 b
DC150-05-05.500A1- 5,5 35 82 44 36 6 b
DC150-05-05.550A1- 5,55 35 82 44 36 6 b
DC150-05-05.556A1- 5,556 7/32“ 35 82 44 36 6 b
DC150-05-05.600A1- 5,6 35 82 44 36 6 b
DC150-05-05.700A1- 5,7 35 82 44 36 6 b
DC150-05-05.800A1- 5,8 35 82 44 36 6 b
DC150-05-05.900A1- 5,9 35 82 44 36 6 b
DC150-05-05.953A1- 5,953 15/64“ 35 82 44 36 6 b
DC150-05-06.000A1- 6 35 82 44 36 6 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-05-06.100A1- 6,1 43 91 53 36 8 b
DC150-05-06.200A1- 6,2 43 91 53 36 8 b
Dc d1
DC150-05-06.300A1- 6,3 43 91 53 36 8 b
DC150-05-06.350A1- 6,35 1/4“ 43 91 53 36 8 b
Lc
l2 l5
DC150-05-06.400A1- 6,4 43 91 53 36 8 b
l1 DC150-05-06.500A1- 6,5 43 91 53 36 8 b
DC150-05-06.600A1- 6,6 43 91 53 36 8 b
DC150-05-06.700A1- 6,7 43 91 53 36 8 b
DC150-05-06.747A1- 6,747 17/64“ 43 91 53 36 8 b
DC150-05-06.800A1- 6,8 43 91 53 36 8 b
DC150-05-06.900A1- 6,9 43 91 53 36 8 b
DC150-05-07.000A1- 7 43 91 53 36 8 b
DC150-05-07.100A1- 7,1 43 91 53 36 8 b
DC150-05-07.144A1- 7,144 9/32“ 43 91 53 36 8 b
DC150-05-07.200A1- 7,2 43 91 53 36 8 b
DC150-05-07.300A1- 7,3 43 91 53 36 8 b
DC150-05-07.400A1- 7,4 43 91 53 36 8 b
DC150-05-07.500A1- 7,5 43 91 53 36 8 b
DC150-05-07.541A1- 7,541 19/64“ 43 91 53 36 8 b
DC150-05-07.550A1- 7,55 43 91 53 36 8 b
DC150-05-07.600A1- 7,6 43 91 53 36 8 b
DC150-05-07.700A1- 7,7 43 91 53 36 8 b
DC150-05-07.800A1- 7,8 43 91 53 36 8 b
DC150-05-07.900A1- 7,9 43 91 53 36 8 b
DC150-05-07.938A1- 7,938 5/16“ 43 91 53 36 8 b
DC150-05-08.000A1- 8 43 91 53 36 8 b
DC150-05-08.100A1- 8,1 49 103 61 40 10 b
DC150-05-08.200A1- 8,2 49 103 61 40 10 b
DC150-05-08.300A1- 8,3 49 103 61 40 10 b
DC150-05-08.334A1- 8,334 21/64“ 49 103 61 40 10 b
DC150-05-08.400A1- 8,4 49 103 61 40 10 b
DC150-05-08.500A1- 8,5 49 103 61 40 10 b
DC150-05-08.600A1- 8,6 49 103 61 40 10 b
DC150-05-08.700A1- 8,7 49 103 61 40 10 b
DC150-05-08.731A1- 8,731 11/32“ 49 103 61 40 10 b
DC150-05-08.800A1- 8,8 49 103 61 40 10 b
DC150-05-08.900A1- 8,9 49 103 61 40 10 b
DC150-05-09.000A1- 9 49 103 61 40 10 b
DC150-05-09.100A1- 9,1 49 103 61 40 10 b
DC150-05-09.128A1- 9,128 23/64“ 49 103 61 40 10 b
DC150-05-09.200A1- 9,2 49 103 61 40 10 b
DC150-05-09.300A1- 9,3 49 103 61 40 10 b
DC150-05-09.400A1- 9,4 49 103 61 40 10 b
DC150-05-09.500A1- 9,4 49 103 61 40 10 b
DC150-05-09.525A1- 9,525 3/8“ 49 103 61 40 10 b
DC150-05-09.550A1- 9,55 49 103 61 40 10 b
DC150-05-09.600A1- 9,6 49 103 61 40 10 b
DC150-05-09.700A1- 9,7 49 103 61 40 10 b
DC150-05-09.800A1- 9,8 49 103 61 40 10 b
DC150-05-09.900A1- 9,9 49 103 61 40 10 b
DC150-05-09.922A1- 9,922 25/64“ 49 103 61 40 10 b
DC150-05-10.000A1- 10 49 103 61 40 10 b
DC150-05-10.100A1- 10,1 56 118 71 45 12 b
DC150-05-10.200A1- 10,2 56 118 71 45 12 b
DC150-05-10.300A1- 10,3 56 118 71 45 12 b
DC150-05-10.319A1- 10,319 13/32“ 56 118 71 45 12 b
DC150-05-10.400A1- 10,4 56 118 71 45 12 b
DC150-05-10.500A1- 10,5 56 118 71 45 12 b
DC150-05-10.600A1- 10,6 56 118 71 45 12 b
DC150-05-10.700A1- 10,7 56 118 71 45 12 b
DC150-05-10.716A1- 10,716 27/64“ 56 118 71 45 12 b
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-05-10.800A1- 10,8 56 118 71 45 12 b
DC150-05-10.900A1- 10,9 56 118 71 45 12 b
Dc d1
DC150-05-11.000A1- 11 56 118 71 45 12 b
DC150-05-11.100A1- 11,1 56 118 71 45 12 b
Lc
l2 l5
DC150-05-11.113A1- 11,113 7/16“ 56 118 71 45 12 b
l1 DC150-05-11.200A1- 11,2 56 118 71 45 12 b
DC150-05-11.300A1- 11,3 56 118 71 45 12 b
DC150-05-11.400A1- 11,4 56 118 71 45 12 b
DC150-05-11.500A1- 11,5 56 118 71 45 12 b
DC150-05-11.509A1- 11,509 29/64“ 56 118 71 45 12 b
DC150-05-11.600A1- 11,6 56 118 71 45 12 b
DC150-05-11.700A1- 11,7 56 118 71 45 12 b
DC150-05-11.800A1- 11,8 56 118 71 45 12 b
DC150-05-11.900A1- 11,9 56 118 71 45 12 b
DC150-05-11.906A1- 11,906 15/32“ 56 118 71 45 12 b
DC150-05-12.000A1- 12 56 118 71 45 12 b
DC150-05-12.100A1- 12,1 60 124 77 45 14 b
DC150-05-12.200A1- 12,2 60 124 77 45 14 b
DC150-05-12.250A1- 12,25 60 124 77 45 14 b
DC150-05-12.300A1- 12,3 60 124 77 45 14 b
DC150-05-12.303A1- 12,303 31/64“ 60 124 77 45 14 b
DC150-05-12.400A1- 12,4 60 124 77 45 14 b
DC150-05-13.100A1- 12,4 60 124 77 45 14 b
DC150-05-12.500A1- 12,5 60 124 77 45 14 b
DC150-05-12.600A1- 12,6 60 124 77 45 14 b
DC150-05-12.700A1- 12,7 1/2“ 60 124 77 45 14 b
DC150-05-12.800A1- 12,8 60 124 77 45 14 b
DC150-05-12.900A1- 12,9 60 124 77 45 14 b
DC150-05-13.000A1- 13 60 124 77 45 14 b
DC150-05-13.200A1- 13,2 60 124 77 45 14 b
DC150-05-13.300A1- 13,3 60 124 77 45 14 b
DC150-05-13.400A1- 13,4 60 124 77 45 14 b
DC150-05-13.494A1- 13,494 17/32“ 60 124 77 45 14 b
DC150-05-13.500A1- 13,5 60 124 77 45 14 b
DC150-05-13.600A1- 13,6 60 124 77 45 14 b
DC150-05-13.700A1- 13,7 60 124 77 45 14 b
DC150-05-13.800A1- 13,8 60 124 77 45 14 b
DC150-05-13.900A1- 13,9 60 124 77 45 14 b
DC150-05-14.000A1- 14 60 124 77 45 14 b
DC150-05-14.100A1- 14,1 63 133 83 48 16 b
DC150-05-14.200A1- 14,2 63 133 83 48 16 b
DC150-05-14.288A1- 14,288 9/16“ 63 133 83 48 16 b
DC150-05-14.300A1- 14,3 63 133 83 48 16 b
DC150-05-14.500A1- 14,5 63 133 83 48 16 b
DC150-05-14.600A1- 14,6 63 133 83 48 16 b
DC150-05-14.700A1- 14,7 63 133 83 48 16 b
DC150-05-14.750A1- 14,75 63 133 83 48 16 b
DC150-05-14.800A1- 14,8 63 133 83 48 16 b
DC150-05-15.000A1- 15 63 133 83 48 16 b
DC150-05-15.100A1- 15,1 63 133 83 48 16 b
DC150-05-15.200A1- 15,2 63 133 83 48 16 b
DC150-05-15.300A1- 15,3 63 133 83 48 16 b
DC150-05-15.500A1- 15,5 63 133 83 48 16 b
DC150-05-15.600A1- 15,6 63 133 83 48 16 b
DC150-05-15.700A1- 15,7 63 133 83 48 16 b
DC150-05-15.800A1- 15,8 63 133 83 48 16 b
DC150-05-15.875A1- 15,875 5/8“ 63 133 83 48 16 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-05-16.000A1- 16 63 133 83 48 16 b
DC150-05-16.100A1- 16,1 71 143 93 48 18 b
Dc d1
DC150-05-16.200A1- 16,2 71 143 93 48 18 b
DC150-05-16.300A1- 16,3 71 143 93 48 18 b
Lc
l2 l5
DC150-05-16.500A1- 16,5 71 143 93 48 18 b
l1 DC150-05-16.700A1- 16,7 71 143 93 48 18 b
DC150-05-16.750A1- 16,75 71 143 93 48 18 b
DC150-05-17.000A1- 17 71 143 93 48 18 b
DC150-05-17.100A1- 17,1 71 143 93 48 18 b
DC150-05-17.200A1- 17,2 71 143 93 48 18 b
DC150-05-17.300A1- 17,3 71 143 93 48 18 b
DC150-05-17.500A1- 17,5 71 143 93 48 18 b
DC150-05-17.600A1- 17,6 71 143 93 48 18 b
DC150-05-17.700A1- 17,7 71 143 93 48 18 b
DC150-05-17.800A1- 17,8 71 143 93 48 18 b
DC150-05-17.900A1- 17,9 71 143 93 48 18 b
DC150-05-18.000A1- 18 71 143 93 48 18 b
DC150-05-18.500A1- 18,5 77 153 101 50 20 b
DC150-05-18.900A1- 18,9 77 153 101 50 20 b
DC150-05-19.000A1- 19 77 153 101 50 20 b
DC150-05-19.050A1- 19,05 3/4“ 77 153 101 50 20 b
DC150-05-19.300A1- 19,3 77 153 101 50 20 b
DC150-05-19.500A1- 19,5 77 153 101 50 20 b
DC150-05-19.700A1- 19,7 77 153 101 50 20 b
DC150-05-19.800A1- 19,8 77 153 101 50 20 b
DC150-05-20.000A1- 20 77 153 101 50 20 b
Shank DIN 6535 HE DC150-05-03.000F1- 3 23 66 28 36 6 b
DC150-05-03.100F1- 3,1 23 66 28 36 6 b
Dc d1
DC150-05-03.200F1- 3,2 23 66 28 36 6 b
DC150-05-03.300F1- 3,3 23 66 28 36 6 b
Lc
l2 l5
DC150-05-03.400F1- 3,4 23 66 28 36 6 b
l1 DC150-05-03.500F1- 3,5 23 66 28 36 6 b
DC150-05-03.600F1- 3,6 23 66 28 36 6 b
DC150-05-03.700F1- 3,7 23 66 28 36 6 b
DC150-05-03.800F1- 3,8 29 74 36 36 6 b
DC150-05-03.900F1- 3,9 29 74 36 36 6 b
DC150-05-04.000F1- 4 29 74 36 36 6 b
DC150-05-04.100F1- 4,1 29 74 36 36 6 b
DC150-05-04.200F1- 4,2 29 74 36 36 6 b
DC150-05-04.300F1- 4,3 29 74 36 36 6 b
DC150-05-04.400F1- 4,4 29 74 36 36 6 b
DC150-05-04.500F1- 4,5 29 74 36 36 6 b
DC150-05-04.600F1- 4,6 29 74 36 36 6 b
DC150-05-04.650F1- 4,65 29 74 36 36 6 b
DC150-05-04.700F1- 4,7 29 74 36 36 6 b
DC150-05-04.800F1- 4,8 35 82 44 36 6 b
DC150-05-04.900F1- 4,9 35 82 44 36 6 b
DC150-05-05.000F1- 5 35 82 44 36 6 b
DC150-05-05.100F1- 5,1 35 82 44 36 6 b
DC150-05-05.200F1- 5,2 35 82 44 36 6 b
DC150-05-05.300F1- 5,3 35 82 44 36 6 b
DC150-05-05.400F1- 5,4 35 82 44 36 6 b
DC150-05-05.500F1- 5,5 35 82 44 36 6 b
DC150-05-05.550F1- 5,55 35 82 44 36 6 b
DC150-05-05.600F1- 5,6 35 82 44 36 6 b
DC150-05-05.700F1- 5,7 35 82 44 36 6 b
DC150-05-05.800F1- 5,8 35 82 44 36 6 b
DC150-05-05.900F1- 5,9 35 82 44 36 6 b
DC150-05-06.000F1- 6 35 82 44 36 6 b
DC150-05-06.100F1- 6,1 43 91 53 36 8 b
DC150-05-06.200F1- 6,2 43 91 53 36 8 b
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HE DC150-05-06.300F1- 6,2 43 91 53 36 8 b
DC150-05-06.400F1- 6,4 43 91 53 36 8 b
Dc d1
DC150-05-06.500F1- 6,5 43 91 53 36 8 b
DC150-05-06.600F1- 6,6 43 91 53 36 8 b
Lc
l2 l5
DC150-05-06.700F1- 6,7 43 91 53 36 8 b
l1 DC150-05-06.800F1- 6,8 43 91 53 36 8 b
DC150-05-06.900F1- 6,9 43 91 53 36 8 b
DC150-05-07.000F1- 7 43 91 53 36 8 b
DC150-05-07.100F1- 7,1 43 91 53 36 8 b
DC150-05-07.200F1- 7,2 43 91 53 36 8 b
DC150-05-07.300F1- 7,3 43 91 53 36 8 b
DC150-05-07.400F1- 7,4 43 91 53 36 8 b
DC150-05-07.500F1- 7,5 43 91 53 36 8 b
DC150-05-07.600F1- 7,6 43 91 53 36 8 b
DC150-05-07.700F1- 7,7 43 91 53 36 8 b
DC150-05-07.800F1- 7,8 43 91 53 36 8 b
DC150-05-07.900F1- 7,9 43 91 53 36 8 b
DC150-05-08.000F1- 8 43 91 53 36 8 b
DC150-05-08.100F1- 8,1 49 103 61 40 10 b
DC150-05-08.200F1- 8,2 49 103 61 40 10 b
DC150-05-08.300F1- 8,3 49 103 61 40 10 b
DC150-05-08.400F1- 8,4 49 103 61 40 10 b
DC150-05-08.500F1- 8,5 49 103 61 40 10 b
DC150-05-08.600F1- 8,6 49 103 61 40 10 b
DC150-05-08.700F1- 8,7 49 103 61 40 10 b
DC150-05-08.800F1- 8,8 49 103 61 40 10 b
DC150-05-09.000F1- 9 49 103 61 40 10 b
DC150-05-09.100F1- 9,1 49 103 61 40 10 b
DC150-05-09.200F1- 9,2 49 103 61 40 10 b
DC150-05-09.300F1- 9,3 49 103 61 40 10 b
DC150-05-09.400F1- 9,4 49 103 61 40 10 b
DC150-05-09.500F1- 9,5 49 103 61 40 10 b
DC150-05-09.600F1- 9,6 49 103 61 40 10 b
DC150-05-09.700F1- 9,7 49 103 61 40 10 b
DC150-05-09.800F1- 9,8 49 103 61 40 10 b
DC150-05-09.900F1- 9,9 49 103 61 40 10 b
DC150-05-10.000F1- 10 49 103 61 40 10 b
DC150-05-10.100F1- 10,1 56 118 71 45 12 b
DC150-05-10.200F1- 10,2 56 118 71 45 12 b
DC150-05-10.300F1- 10,3 56 118 71 45 12 b
DC150-05-10.400F1- 10,4 56 118 71 45 12 b
DC150-05-10.500F1- 10,5 56 118 71 45 12 b
DC150-05-10.600F1- 10,6 56 118 71 45 12 b
DC150-05-10.800F1- 10,8 56 118 71 45 12 b
DC150-05-11.000F1- 11 56 118 71 45 12 b
DC150-05-11.100F1- 11,1 56 118 71 45 12 b
DC150-05-11.200F1- 11,2 56 118 71 45 12 b
DC150-05-11.300F1- 11,3 56 118 71 45 12 b
DC150-05-11.500F1- 11,5 56 118 71 45 12 b
DC150-05-11.600F1- 11,6 56 118 71 45 12 b
DC150-05-11.700F1- 11,7 56 118 71 45 12 b
DC150-05-11.800F1- 11,8 56 118 71 45 12 b
DC150-05-11.900F1- 11,9 56 118 71 45 12 b
DC150-05-12.000F1- 12 56 118 71 45 12 b
DC150-05-12.100F1- 12,1 60 124 77 45 14 b
DC150-05-12.200F1- 12,2 60 124 77 45 14 b
DC150-05-12.300F1- 12,3 60 124 77 45 14 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HE DC150-05-12.400F1- 12,4 60 124 77 45 14 b
DC150-05-12.500F1- 12,5 60 124 77 45 14 b
Dc d1
DC150-05-12.700F1- 12,7 1/2“ 60 124 77 45 14 b
DC150-05-12.800F1- 12,8 60 124 77 45 14 b
Lc
l2 l5
DC150-05-13.000F1- 13 60 124 77 45 14 b
l1 DC150-05-13.100F1- 13,1 60 124 77 45 14 b
DC150-05-13.200F1- 13,2 60 124 77 45 14 b
DC150-05-13.500F1- 13,5 60 124 77 45 14 b
DC150-05-13.800F1- 13,8 60 124 77 45 14 b
DC150-05-14.000F1- 14 60 124 77 45 14 b
DC150-05-14.100F1- 14,1 63 133 83 48 16 b
DC150-05-14.200F1- 14,2 63 133 83 48 16 b
DC150-05-14.300F1- 14,3 63 133 83 48 16 b
DC150-05-14.500F1- 14,5 63 133 83 48 16 b
DC150-05-14.600F1- 14,6 63 133 83 48 16 b
DC150-05-14.800F1- 14,8 63 133 83 48 16 b
DC150-05-15.000F1- 15 63 133 83 48 16 b
DC150-05-15.100F1- 15,1 63 133 83 48 16 b
DC150-05-15.200F1- 15,2 63 133 83 48 16 b
DC150-05-15.300F1- 15,3 63 133 83 48 16 b
DC150-05-15.500F1- 15,5 63 133 83 48 16 b
DC150-05-15.600F1- 15,6 63 133 83 48 16 b
DC150-05-15.700F1- 15,7 63 133 83 48 16 b
DC150-05-15.800F1- 15,8 63 133 83 48 16 b
DC150-05-16.000F1- 16 63 133 83 48 16 b
DC150-05-16.500F1- 16,5 71 143 93 48 18 b
DC150-05-16.600F1- 16,6 71 143 93 48 18 b
DC150-05-17.000F1- 17 71 143 93 48 18 b
DC150-05-17.200F1- 17,2 71 143 93 48 18 b
DC150-05-17.300F1- 17,3 71 143 93 48 18 b
DC150-05-17.500F1- 17,5 71 143 93 48 18 b
DC150-05-17.700F1- 17,7 71 143 93 48 18 b
DC150-05-17.800F1- 17,8 71 143 93 48 18 b
DC150-05-18.000F1- 18 71 143 93 48 18 b
DC150-05-18.100F1- 18,1 77 153 101 50 20 b
DC150-05-18.500F1- 18,5 77 153 101 50 20 b
DC150-05-18.800F1- 18,8 77 153 101 50 20 b
DC150-05-19.000F1- 19 77 153 101 50 20 b
DC150-05-19.500F1- 19,5 77 153 101 50 20 b
DC150-05-19.700F1- 19,7 77 153 101 50 20 b
DC150-05-20.000F1- 20 77 153 101 50 20 b
XIII D1 B 414 B 430

Solid drilling
B1
DC170 Supreme
8×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-08-03.000A1- 3 28 74 34 36 6 b
DC170-08-03.100A1- 3,1 28 74 34 36 6 b
Dc d1
DC170-08-03.175A1- 3,175 1/8“ 28 74 34 36 6 b
DC170-08-03.200A1- 3,2 28 74 34 36 6 b
Lc
l2 l5
DC170-08-03.300A1- 3,3 28 74 34 36 6 b
l1 DC170-08-03.400A1- 3,4 28 74 34 36 6 b
DC170-08-03.500A1- 3,5 28 74 34 36 6 b
DC170-08-03.572A1- 3,572 9/64“ 28 74 34 36 6 b
DC170-08-03.600A1- 3,6 28 74 34 36 6 b
DC170-08-03.700A1- 3,7 28 74 34 36 6 b
DC170-08-03.800A1- 3,8 37 85 45 36 6 b
DC170-08-03.900A1- 3,9 37 85 45 36 6 b
DC170-08-03.969A1- 3,969 5/32“ 37 85 45 36 6 b
DC170-08-04.000A1- 4 37 85 45 36 6 b
DC170-08-04.100A1- 4,1 37 85 45 36 6 b
DC170-08-04.200A1- 4,2 37 85 45 36 6 b
DC170-08-04.300A1- 4,3 37 85 45 36 6 b
DC170-08-04.366A1- 4,366 11/64“ 37 85 45 36 6 b
DC170-08-04.400A1- 4,4 37 85 45 36 6 b
DC170-08-04.500A1- 4,5 37 85 45 36 6 b
DC170-08-04.600A1- 4,6 37 85 45 36 6 b
DC170-08-04.700A1- 4,7 37 85 45 36 6 b
DC170-08-04.763A1- 4,763 3/16“ 48 97 57 36 6 b
DC170-08-04.800A1- 4,8 48 97 57 36 6 b
DC170-08-04.900A1- 4,9 48 97 57 36 6 b
DC170-08-05.000A1- 5 48 97 57 36 6 b
DC170-08-05.100A1- 5,1 48 97 57 36 6 b
DC170-08-05.159A1- 5,159 13/64“ 48 97 57 36 6 b
DC170-08-05.200A1- 5,2 48 97 57 36 6 b
DC170-08-05.300A1- 5,3 48 97 57 36 6 b
DC170-08-05.400A1- 5,4 48 97 57 36 6 b
DC170-08-05.500A1- 5,5 48 97 57 36 6 b
DC170-08-05.556A1- 5,556 7/32“ 48 97 57 36 6 b
DC170-08-05.600A1- 5,6 48 97 57 36 6 b
DC170-08-05.700A1- 5,7 48 97 57 36 6 b
DC170-08-05.800A1- 5,8 48 97 57 36 6 b
DC170-08-05.900A1- 5,9 48 97 57 36 6 b
DC170-08-05.953A1- 5,953 15/64“ 48 97 57 36 6 b
DC170-08-06.000A1- 6 48 97 57 36 6 b
DC170-08-06.100A1- 6,1 55 106 66 36 8 b
DC170-08-06.200A1- 6,2 55 106 66 36 8 b
DC170-08-06.300A1- 6,3 55 106 66 36 8 b
DC170-08-06.350A1- 6,35 1/4“ 55 106 66 36 8 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-08-06.400A1- 6,4 55 106 66 36 8 b
DC170-08-06.500A1- 6,5 55 106 66 36 8 b
Dc d1
DC170-08-06.600A1- 6,6 55 106 66 36 8 b
DC170-08-06.700A1- 6,7 55 106 66 36 8 b
Lc
l2 l5
DC170-08-06.747A1- 6,747 17/64“ 55 106 66 36 8 b
l1 DC170-08-06.800A1- 6,8 55 106 66 36 8 b
DC170-08-06.900A1- 6,9 55 106 66 36 8 b
DC170-08-07.000A1- 7 55 106 66 36 8 b
DC170-08-07.100A1- 7,1 64 116 76 36 8 b
DC170-08-07.144A1- 7,144 9/32“ 64 116 76 36 8 b
DC170-08-07.200A1- 7,2 64 116 76 36 8 b
DC170-08-07.300A1- 7,3 64 116 76 36 8 b
DC170-08-07.400A1- 7,4 64 116 76 36 8 b
DC170-08-07.500A1- 7,5 64 116 76 36 8 b
DC170-08-07.541A1- 7,541 19/64“ 64 116 76 36 8 b
DC170-08-07.600A1- 7,6 64 116 76 36 8 b
DC170-08-07.700A1- 7,7 64 116 76 36 8 b
DC170-08-07.800A1- 7,8 64 116 76 36 8 b
DC170-08-07.900A1- 7,9 64 116 76 36 8 b
DC170-08-07.938A1- 7,938 5/16“ 64 116 76 36 8 b
DC170-08-08.000A1- 8 64 116 76 36 8 b
DC170-08-08.100A1- 8,1 80 139 95 40 10 b
DC170-08-08.200A1- 8,2 80 139 95 40 10 b
DC170-08-08.300A1- 8,3 80 139 95 40 10 b
DC170-08-08.334A1- 8,334 21/64“ 80 139 95 40 10 b
DC170-08-08.400A1- 8,4 80 139 95 40 10 b
DC170-08-08.500A1- 8,5 80 139 95 40 10 b
DC170-08-08.600A1- 8,6 80 139 95 40 10 b
DC170-08-08.700A1- 8,7 80 139 95 40 10 b
DC170-08-08.731A1- 8,731 11/32“ 80 139 95 40 10 b
DC170-08-08.800A1- 8,8 80 139 95 40 10 b
DC170-08-08.900A1- 8,9 80 139 95 40 10 b
DC170-08-09.000A1- 9 80 139 95 40 10 b
DC170-08-09.100A1- 9,1 80 139 95 40 10 b
DC170-08-09.128A1- 9,128 23/64“ 80 139 95 40 10 b
DC170-08-09.200A1- 9,2 80 139 95 40 10 b
DC170-08-09.300A1- 9,3 80 139 95 40 10 b
DC170-08-09.400A1- 9,4 80 139 95 40 10 b
DC170-08-09.500A1- 9,5 80 139 95 40 10 b
DC170-08-09.525A1- 9,525 3/8“ 80 139 95 40 10 b
DC170-08-09.600A1- 9,6 80 139 95 40 10 b
DC170-08-09.700A1- 9,7 80 139 95 40 10 b
DC170-08-09.800A1- 9,8 80 139 95 40 10 b
DC170-08-09.900A1- 9,9 80 139 95 40 10 b
DC170-08-09.922A1- 9,922 25/64“ 80 139 95 40 10 b
DC170-08-10.000A1- 10 80 139 95 40 10 b
DC170-08-10.100A1- 10,1 96 163 114 45 12 b
DC170-08-10.200A1- 10,2 96 163 114 45 12 b
DC170-08-10.300A1- 10,3 96 163 114 45 12 b
DC170-08-10.319A1- 10,319 13/32“ 96 163 114 45 12 b
DC170-08-10.400A1- 10,4 96 163 114 45 12 b
DC170-08-10.500A1- 10,5 96 163 114 45 12 b
DC170-08-10.600A1- 10,6 96 163 114 45 12 b
DC170-08-10.700A1- 10,7 96 163 114 45 12 b
DC170-08-10.716A1- 10,716 27/64“ 96 163 114 45 12 b
DC170-08-10.800A1- 10,8 96 163 114 45 12 b
DC170-08-10.900A1- 10,9 96 163 114 45 12 b
DC170-08-11.000A1- 11 96 163 114 45 12 b
DC170-08-11.100A1- 11,1 96 163 114 45 12 b
DC170-08-11.113A1- 11,113 7/16“ 96 163 114 45 12 b
DC170-08-11.200A1- 11,2 96 163 114 45 12 b
XIII D1 B 414 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-08-11.300A1- 11,3 96 163 114 45 12 b
DC170-08-11.400A1- 11,4 96 163 114 45 12 b
Dc d1
DC170-08-11.500A1- 11,5 96 163 114 45 12 b
DC170-08-11.509A1- 11,509 29/64“ 96 163 114 45 12 b
Lc
l2 l5
DC170-08-11.600A1- 11,6 96 163 114 45 12 b
l1 DC170-08-11.700A1- 11,7 96 163 114 45 12 b
DC170-08-11.800A1- 11,8 96 163 114 45 12 b
DC170-08-11.900A1- 11,9 96 163 114 45 12 b
DC170-08-11.906A1- 11,906 15/32“ 96 163 114 45 12 b
DC170-08-12.000A1- 12 96 163 114 45 12 b
DC170-08-12.303A1- 12,303 31/64“ 119 182 133 45 14 b
DC170-08-12.500A1- 12,5 119 182 133 45 14 b
DC170-08-12.700A1- 12,7 1/2“ 119 182 133 45 14 b
DC170-08-13.000A1- 13 119 182 133 45 14 b
DC170-08-13.494A1- 13,494 17/32“ 119 182 133 45 14 b
DC170-08-13.500A1- 13,5 119 182 133 45 14 b
DC170-08-14.000A1- 14 119 182 133 45 14 b
DC170-08-14.288A1- 14,288 9/16“ 136 204 152 48 16 b
DC170-08-14.500A1- 14,5 136 204 152 48 16 b
DC170-08-15.000A1- 15 136 204 152 48 16 b
DC170-08-15.500A1- 15,5 136 204 152 48 16 b
DC170-08-15.875A1- 15,875 5/8“ 136 204 152 48 16 b
DC170-08-16.000A1- 16 136 204 152 48 16 b
DC170-08-16.500A1- 16,5 153 223 171 48 18 b
DC170-08-17.000A1- 17 153 223 171 48 18 b
DC170-08-17.500A1- 17,5 153 223 171 48 18 b
DC170-08-18.000A1- 18 153 223 171 48 18 b
DC170-08-18.500A1- 18,5 170 244 190 50 20 b
DC170-08-19.000A1- 19 170 244 190 50 20 b
DC170-08-19.050A1- 19,05 3/4“ 170 244 190 50 20 b
DC170-08-19.500A1- 19,5 170 244 190 50 20 b
DC170-08-20.000A1- 20 170 244 190 50 20 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 414 B 430

Solid drilling
B1
A6489AMP
X·treme DM8
8×Dc
140°
P M K N S H O
AMP CC CC CC CC CC C C
Dc d1
AMP mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6489AMP-2 2 20 63 23 35 3
A6489AMP-2.05 2,05 20 63 24 35 3
Dc
A6489AMP-2.1 2,1 20 63 24 35 3
d1 A6489AMP-2.15 2,15 21 63 25 34 3
Lc A6489AMP-2.2 2,2 21 63 25 34 3
l2 l5
l1
A6489AMP-2.25 2,25 22 67 26 37 3
A6489AMP-2.3 2,3 22 67 26 37 3
A6489AMP-2.35 2,35 24 67 28 35 3
A6489AMP-3/32IN 2,381 3/32“ 24 67 28 35 3
A6489AMP-2.4 2,4 24 67 28 35 3
A6489AMP-2.45 2,45 25 67 29 34 3
A6489AMP-2.5 2,5 25 67 29 34 3
A6489AMP-2.55 2,55 26 71 30 37 3
A6489AMP-2.6 2,6 26 71 30 37 3
A6489AMP-2.65 2,65 26 71 31 37 3
A6489AMP-2.7 2,7 26 71 31 37 3
A6489AMP-2.75 2,75 27 71 32 36 3
A6489AMP-7/64IN 2,778 7/64“ 27 71 32 36 3
A6489AMP-2.8 2,8 27 71 32 36 3
A6489AMP-2.85 2,85 28 71 33 35 3
A6489AMP-2.9 2,9 28 71 33 35 3
A6489AMP-2.95 2,95 29 71 34 34 3
XIII D1 B 414 B 430

Solid drilling
B1
A6488TML
Alpha® 4 Plus Micro
8×Dc
140°
P M K N S H O
TML CC CC CC CC CC C CC
Dc d1
TML mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6488TML-0.75 0,75 8,5 55 10 38 3
A6488TML-1/32IN 0,794 1/32“ 8,5 55 10 39 3
Dc
A6488TML-0.8 0,8 8,5 55 10 38 3
d1 A6488TML-0.88 0,88 8,5 55 10 37 3
Lc A6488TML-0.9 0,9 8,5 55 10 37 3
l2 l5
l1
A6488TML-0.95 0,95 8,5 55 10 37 3
A6488TML-1 1 12 55 15 36 3
A6488TML-1.05 1,05 12 55 15 36 3
A6488TML-1.08 1,08 12 55 15 36 3
A6488TML-1.1 1,1 12 55 15 36 3
A6488TML-1.15 1,15 12 55 15 36 3
A6488TML-3/64IN 1,191 3/64“ 12 55 15 35 3
A6488TML-1.2 1,2 12 55 15 35 3
A6488TML-1.25 1,25 12 55 15 35 3
A6488TML-1.3 1,3 12 55 15 34 3
A6488TML-1.35 1,35 12 55 15 34 3
A6488TML-1.4 1,4 12 55 15 33 3
A6488TML-1.45 1,45 12 55 15 33 3
A6488TML-1.5 1,5 17 68 20 46 3
A6488TML-1.55 1,55 17 68 20 46 3
A6488TML-1/16IN 1,588 1/16“ 17 68 20 45 3
A6488TML-1.6 1,6 17 68 20 45 3
A6488TML-1.65 1,65 17 68 20 45 3
A6488TML-1.7 1,7 17 68 20 44 3
A6488TML-1.75 1,75 17 68 20 44 3
A6488TML-1.8 1,8 17 68 20 44 3
A6488TML-1.82 1,82 17 68 20 43 3
A6488TML-1.85 1,85 17 68 20 44 3
A6488TML-1.9 1,9 17 68 20 43 3
A6488TML-1.95 1,95 17 68 20 43 3
A6488TML-5/64IN 1,984 5/64“ 17 68 20 43 3
plication
Primary ap
ation
Other applic
D1 B 414 B 430

Solid drilling
B1
A6489DPP
X·treme D8
8×Dc
140°
P M K N S H O
DPP CC CC CC CC CC CC C
Dc d1
DPP mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6489DPP-3 3 28 74 34 36 6
A6489DPP-3.1 3,1 28 74 34 36 6
Dc d1
A6489DPP-1/8IN 3,175 1/8“ 28 74 34 36 6
A6489DPP-3.2 3,2 28 74 34 36 6
Lc A6489DPP-3.3 3,3 28 74 34 36 6
l2 l5
l1 A6489DPP-3.4 3,4 28 74 34 36 6
A6489DPP-3.5 3,5 28 74 34 36 6
A6489DPP-9/64IN 3,572 9/64“ 28 74 34 36 6
A6489DPP-3.6 3,6 28 74 34 36 6
A6489DPP-3.7 3,7 28 74 34 36 6
A6489DPP-3.8 3,8 37 85 45 36 6
A6489DPP-3.9 3,9 37 85 45 36 6
A6489DPP-5/32IN 3,969 5/32“ 37 85 45 36 6
A6489DPP-4 4 37 85 45 36 6
A6489DPP-4.1 4,1 37 85 45 36 6
A6489DPP-4.2 4,2 37 85 45 36 6
A6489DPP-4.3 4,3 37 85 45 36 6
A6489DPP-11/64IN 4,366 11/64“ 37 85 45 36 6
A6489DPP-4.4 4,4 37 85 45 36 6
A6489DPP-4.5 4,5 37 85 45 36 6
A6489DPP-4.6 4,6 37 85 45 36 6
A6489DPP-4.7 4,7 37 85 45 36 6
A6489DPP-3/16IN 4,763 3/16“ 48 97 57 36 6
A6489DPP-4.8 4,8 48 97 57 36 6
A6489DPP-4.9 4,9 48 97 57 36 6
A6489DPP-5 5 48 97 57 36 6
A6489DPP-5.1 5,1 48 97 57 36 6
A6489DPP-13/64IN 5,159 13/64“ 48 97 57 36 6
A6489DPP-5.2 5,2 48 97 57 36 6
A6489DPP-5.3 5,3 48 97 57 36 6
A6489DPP-5.4 5,4 48 97 57 36 6
A6489DPP-5.5 5,5 48 97 57 36 6
A6489DPP-7/32IN 5,556 7/32“ 48 97 57 36 6
A6489DPP-5.6 5,6 48 97 57 36 6
A6489DPP-5.7 5,7 48 97 57 36 6
A6489DPP-5.8 5,8 48 97 57 36 6
A6489DPP-5.9 5,9 48 97 57 36 6
A6489DPP-15/64IN 5,953 15/64“ 48 97 57 36 6
A6489DPP-6 6 48 97 57 36 6
A6489DPP-6.1 6,1 55 106 66 36 8
A6489DPP-6.2 6,2 55 106 66 36 8
A6489DPP-6.3 6,3 55 106 66 36 8
A6489DPP-1/4IN 6,35 1/4“ 55 106 66 36 8
A6489DPP-6.4 6,4 55 106 66 36 8
A6489DPP-6.5 6,5 55 106 66 36 8
A6489DPP-6.6 6,6 55 106 66 36 8
A6489DPP-6.7 6,7 55 106 66 36 8
A6489DPP-17/64IN 6,747 17/64“ 55 106 66 36 8
Continued
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A6489DPP-6.8 6,8 55 106 66 36 8
A6489DPP-6.9 6,9 55 106 66 36 8
Dc d1
A6489DPP-7 7 55 106 66 36 8
A6489DPP-7.1 7,1 64 116 76 36 8
Lc A6489DPP-9/32IN 7,144 9/32“ 64 116 76 36 8
l2 l5
l1 A6489DPP-7.2 7,2 64 116 76 36 8
A6489DPP-7.3 7,3 64 116 76 36 8
A6489DPP-7.4 7,4 64 116 76 36 8
A6489DPP-7.5 7,5 64 116 76 36 8
A6489DPP-19/64IN 7,541 19/64“ 64 116 76 36 8
A6489DPP-7.6 7,6 64 116 76 36 8
A6489DPP-7.7 7,7 64 116 76 36 8
A6489DPP-7.8 7,8 64 116 76 36 8
A6489DPP-7.9 7,9 64 116 76 36 8
A6489DPP-5/16IN 7,938 5/16“ 64 116 76 36 8
A6489DPP-8 8 64 116 76 36 8
A6489DPP-8.1 8,1 80 139 95 40 10
A6489DPP-8.2 8,2 80 139 95 40 10
A6489DPP-8.3 8,3 80 139 95 40 10
A6489DPP-21/64IN 8,334 21/64“ 80 139 95 40 10
A6489DPP-8.4 8,4 80 139 95 40 10
A6489DPP-8.5 8,5 80 139 95 40 10
A6489DPP-8.6 8,6 80 139 95 40 10
A6489DPP-8.7 8,7 80 139 95 40 10
A6489DPP-11/32IN 8,731 11/32“ 80 139 95 40 10
A6489DPP-8.8 8,8 80 139 95 40 10
A6489DPP-8.9 8,9 80 139 95 40 10
A6489DPP-9 9 80 139 95 40 10
A6489DPP-9.1 9,1 80 139 95 40 10
A6489DPP-23/64IN 9,128 23/64“ 80 139 95 40 10
A6489DPP-9.2 9,2 80 139 95 40 10
A6489DPP-9.3 9,3 80 139 95 40 10
A6489DPP-9.4 9,4 80 139 95 40 10
A6489DPP-9.5 9,5 80 139 95 40 10
A6489DPP-3/8IN 9,525 3/8“ 80 139 95 40 10
A6489DPP-9.6 9,6 80 139 95 40 10
A6489DPP-9.7 9,7 80 139 95 40 10
A6489DPP-9.8 9,8 80 139 95 40 10
A6489DPP-9.9 9,9 80 139 95 40 10
A6489DPP-25/64IN 9,922 25/64“ 80 139 95 40 10
A6489DPP-10 10 80 139 95 40 10
A6489DPP-10.1 10,1 96 163 114 45 12
A6489DPP-10.2 10,2 96 163 114 45 12
A6489DPP-10.3 10,3 96 163 114 45 12
A6489DPP-13/32IN 10,319 13/32“ 96 163 114 45 12
A6489DPP-10.4 10,4 96 163 114 45 12
A6489DPP-10.5 10,5 96 163 114 45 12
A6489DPP-10.6 10,6 96 163 114 45 12
A6489DPP-10.7 10,7 96 163 114 45 12
A6489DPP-27/64IN 10,716 27/64“ 96 163 114 45 12
A6489DPP-10.8 10,8 96 163 114 45 12
A6489DPP-10.9 10,9 96 163 114 45 12
A6489DPP-11 11 96 163 114 45 12
A6489DPP-11.1 11,1 96 163 114 45 12
A6489DPP-7/16IN 11,113 7/16“ 96 163 114 45 12
A6489DPP-11.2 11,2 96 163 114 45 12
A6489DPP-11.3 11,3 96 163 114 45 12
A6489DPP-11.4 11,4 96 163 114 45 12
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 414 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A6489DPP-11.5 11,5 96 163 114 45 12
A6489DPP-29/64IN 11,509 29/64“ 96 163 114 45 12
Dc d1
A6489DPP-11.6 11,6 96 163 114 45 12
A6489DPP-11.7 11,7 96 163 114 45 12
Lc A6489DPP-11.8 11,8 96 163 114 45 12
l2 l5
l1 A6489DPP-11.9 11,9 96 163 114 45 12
A6489DPP-15/32IN 11,906 15/32“ 96 163 114 45 12
A6489DPP-12 12 96 163 114 45 12
A6489DPP-31/64IN 12,303 31/64“ 119 182 133 45 14
A6489DPP-12.5 12,5 119 182 133 45 14
A6489DPP-1/2IN 12,7 1/2“ 119 182 133 45 14
A6489DPP-13 13 119 182 133 45 14
A6489DPP-17/32IN 13,494 17/32“ 119 182 133 45 14
A6489DPP-13.5 13,5 119 182 133 45 14
A6489DPP-14 14 119 182 133 45 14
A6489DPP-9/16IN 14,288 9/16“ 136 204 152 48 16
A6489DPP-14.5 14,5 136 204 152 48 16
A6489DPP-15 15 136 204 152 48 16
A6489DPP-15.5 15,5 136 204 152 48 16
A6489DPP-5/8IN 15,875 5/8“ 136 204 152 48 16
A6489DPP-16 16 136 204 152 48 16
A6489DPP-16.5 16,5 153 223 171 48 18
A6489DPP-17 17 153 223 171 48 18
A6489DPP-17.5 17,5 153 223 171 48 18
A6489DPP-18 18 153 223 171 48 18
A6489DPP-18.5 18,5 170 244 190 50 20
A6489DPP-19 19 170 244 190 50 20
A6489DPP-3/4IN 19,05 3/4“ 170 244 190 50 20
A6489DPP-19.5 19,5 170 244 190 50 20
A6489DPP-20 20 170 244 190 50 20
XIII D1 B 414 B 430

Solid drilling
B1
A6493TTP
X·treme Inox
8×Dc
140°
P M K N S H O
TTP C CC C CC C
Dc d1
Shank DIN 6535 HA A6493TTP-3 3 28 74 34 36 6
A6493TTP-3.1 3,1 28 74 34 36 6
Dc d1
A6493TTP-1/8IN 3,175 1/8“ 28 74 34 36 6
A6493TTP-3.2 3,2 28 74 34 36 6
Lc A6493TTP-3.3 3,3 28 74 34 36 6
l2 l5
l1 A6493TTP-3.4 3,4 28 74 34 36 6
A6493TTP-3.5 3,5 28 74 34 36 6
A6493TTP-3.7 3,7 28 74 34 36 6
A6493TTP-3.8 3,8 37 85 45 36 6
A6493TTP-3.9 3,9 37 85 45 36 6
A6493TTP-4 4 37 85 45 36 6
A6493TTP-4.1 4,1 37 85 45 36 6
A6493TTP-4.2 4,2 37 85 45 36 6
A6493TTP-4.3 4,3 37 85 45 36 6
A6493TTP-4.5 4,5 37 85 45 36 6
A6493TTP-4.7 4,7 37 85 45 36 6
A6493TTP-3/16IN 4,763 3/16“ 48 97 57 36 6
A6493TTP-4.8 4,8 48 97 57 36 6
A6493TTP-5 5 48 97 57 36 6
A6493TTP-5.1 5,1 48 97 57 36 6
A6493TTP-5.2 5,2 48 97 57 36 6
A6493TTP-5.5 5,5 48 97 57 36 6
A6493TTP-5.6 5,6 48 97 57 36 6
A6493TTP-5.8 5,8 48 97 57 36 6
A6493TTP-6 6 48 97 57 36 6
A6493TTP-6.1 6,1 55 106 66 36 8
A6493TTP-6.2 6,2 55 106 66 36 8
A6493TTP-6.3 6,3 55 106 66 36 8
A6493TTP-1/4IN 6,35 1/4“ 55 106 66 36 8
A6493TTP-6.4 6,4 55 106 66 36 8
A6493TTP-6.5 6,5 55 106 66 36 8
A6493TTP-6.6 6,6 55 106 66 36 8
A6493TTP-6.7 6,7 55 106 66 36 8
A6493TTP-6.8 6,8 55 106 66 36 8
A6493TTP-6.9 6,9 55 106 66 36 8
A6493TTP-7 7 55 106 66 36 8
A6493TTP-9/32IN 7,144 9/32“ 64 116 76 36 8
A6493TTP-7.5 7,5 64 116 76 36 8
A6493TTP-7.6 7,6 64 116 76 36 8
A6493TTP-7.7 7,7 64 116 76 36 8
A6493TTP-8 8 64 116 76 36 8
A6493TTP-8.1 8,1 80 139 95 40 10
A6493TTP-8.2 8,2 80 139 95 40 10
A6493TTP-8.4 8,4 80 139 95 40 10
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 416 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A6493TTP-8.5 8,5 80 139 95 40 10
A6493TTP-8.6 8,6 80 139 95 40 10
Dc d1
A6493TTP-8.7 8,7 80 139 95 40 10
A6493TTP-8.8 8,8 80 139 95 40 10
Lc A6493TTP-9 9 80 139 95 40 10
l2 l5
l1 A6493TTP-9.2 9,2 80 139 95 40 10
A6493TTP-9.3 9,3 80 139 95 40 10
A6493TTP-9.5 9,5 80 139 95 40 10
A6493TTP-9.8 9,8 80 139 95 40 10
A6493TTP-10 10 80 139 95 40 10
A6493TTP-10.2 10,2 96 163 114 45 12
A6493TTP-10.5 10,5 96 163 114 45 12
A6493TTP-11 11 96 163 114 45 12
A6493TTP-11.5 11,5 96 163 114 45 12
A6493TTP-12 12 96 163 114 45 12
A6493TTP-12.5 12,5 119 182 133 45 14
A6493TTP-13 13 119 182 133 45 14
A6493TTP-14 14 119 182 133 45 14
A6493TTP-15 15 136 204 152 48 16
A6493TTP-16 16 136 204 152 48 16
XIII D1 B 416 B 430

Solid drilling
B1
Solid carbide drills with coolant-through,
straight-fluted
A3487
Alpha® Jet
8×Dc
120°
P M K N S H O
Uncoated C C C
Dc d1
Shank DIN 6535 HA A3487-5 5 45 101 63 36 6
A3487-6 6 45 101 63 36 6
A3487-8 8 59 117 79 36 8
Dc d1
A3487-9 9 71 133 91 40 10
Lc A3487-10 10 71 133 91 40 10
l2 l5 A3487-11 11 80 151 104 45 12
l1
A3487-12 12 80 151 104 45 12
A3487-14 14 85 160 113 45 14
A3487-15 15 104 178 128 48 16
A3487-16 16 104 178 128 48 16
A3487-17 17 114 191 141 48 18
A3487-18 18 114 191 141 48 18
A3487-20 20 123 205 153 50 20
plication
Primary ap
ation
Other applic
XIII D1 B 416 B 430

Solid drilling
B1
A3486TIP / A3586TIP
Alpha® 44
8×Dc
130°
P M K N S H O
TIP CC C C CC C C
Dc d1
Designation m7 Lc l1 l2 l5 h6
TIP mm mm mm mm mm mm
Shank DIN 6535 HA A3486TIP-5 5 54 101 63 36 6
A3486TIP-5.1 5,1 54 101 63 36 6
Dc d1
A3486TIP-5.2 5,2 54 101 63 36 6
A3486TIP-5.5 5,5 54 101 63 36 6
Lc A3486TIP-5.8 5,8 54 101 63 36 6
l2 l5
l1 A3486TIP-6 6 54 101 63 36 6
A3486TIP-6.1 6,1 67 117 79 36 8
A3486TIP-6.5 6,5 67 117 79 36 8
A3486TIP-6.6 6,6 67 117 79 36 8
A3486TIP-6.8 6,8 67 117 79 36 8
A3486TIP-7 7 67 117 79 36 8
A3486TIP-7.5 7,5 67 117 79 36 8
A3486TIP-7.8 7,8 67 117 79 36 8
A3486TIP-8 8 67 117 79 36 8
A3486TIP-8.1 8,1 76 133 91 40 10
A3486TIP-8.5 8,5 76 133 91 40 10
A3486TIP-9 9 76 133 91 40 10
A3486TIP-9.5 9,5 76 133 91 40 10
A3486TIP-10 10 76 133 91 40 10
A3486TIP-10.2 10,2 86 151 104 45 12
A3486TIP-10.5 10,5 86 151 104 45 12
A3486TIP-11 11 86 151 104 45 12
A3486TIP-12 12 86 151 104 45 12
Shank DIN 6535 HE A3586TIP-5 5 54 101 63 36 6
A3586TIP-5.1 5,1 54 101 63 36 6
Dc d1 A3586TIP-5.5 5,5 54 101 63 36 6
A3586TIP-5.8 5,8 54 101 63 36 6
Lc A3586TIP-6 6 54 101 63 36 6
l2 l5
l1 A3586TIP-6.1 6,1 67 117 79 36 8
A3586TIP-6.5 6,5 67 117 79 36 8
A3586TIP-6.6 6,6 67 117 79 36 8
A3586TIP-6.8 6,8 67 117 79 36 8
A3586TIP-7 7 67 117 79 36 8
A3586TIP-7.5 7,5 67 117 79 36 8
A3586TIP-7.8 7,8 67 117 79 36 8
A3586TIP-8 8 67 117 79 36 8
A3586TIP-8.1 8,1 76 133 91 40 10
A3586TIP-8.5 8,5 76 133 91 40 10
A3586TIP-9 9 76 133 91 40 10
A3586TIP-9.5 9,5 76 133 91 40 10
A3586TIP-10 10 76 133 91 40 10
A3586TIP-10.5 10,5 86 151 104 45 12
A3586TIP-11 11 86 151 104 45 12
A3586TIP-12 12 86 151 104 45 12
XIII D1 B 416 B 430

Solid drilling
B1
DC150 Perform
8×Dc
140°
P M K N S H O
WJ30TA CC C CC CC CC C C
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-08-03.000A1- 3 28 74 34 36 6 b
DC150-08-03.100A1- 3,1 28 74 34 36 6 b
Dc d1
DC150-08-03.175A1- 3,175 1/8“ 28 74 34 36 6 b
DC150-08-03.200A1- 3,2 28 74 34 36 6 b
Lc
l2 l5
DC150-08-03.300A1- 3,3 28 74 34 36 6 b
l1 DC150-08-03.400A1- 3,4 28 74 34 36 6 b
DC150-08-03.500A1- 3,5 28 74 34 36 6 b
DC150-08-03.572A1- 3,572 9/64“ 28 74 34 36 6 b
DC150-08-03.600A1- 3,6 28 74 34 36 6 b
DC150-08-03.700A1- 3,7 28 74 34 36 6 b
DC150-08-03.800A1- 3,8 37 85 45 36 6 b
DC150-08-03.900A1- 3,9 37 85 45 36 6 b
DC150-08-03.969A1- 3,969 5/32“ 37 85 45 36 6 b
DC150-08-04.000A1- 4 37 85 45 36 6 b
DC150-08-04.100A1- 4,1 37 85 45 36 6 b
DC150-08-04.200A1- 4,2 37 85 45 36 6 b
DC150-08-04.300A1- 4,3 37 85 45 36 6 b
DC150-08-04.366A1- 4,366 11/64“ 37 85 45 36 6 b
DC150-08-04.400A1- 4,4 37 85 45 36 6 b
DC150-08-04.500A1- 4,5 37 85 45 36 6 b
DC150-08-04.600A1- 4,6 37 85 45 36 6 b
DC150-08-04.700A1- 4,7 37 85 45 36 6 b
DC150-08-04.763A1- 4,7 37 85 45 36 6 b
DC150-08-04.800A1- 4,8 48 97 57 36 6 b
DC150-08-04.900A1- 4,9 48 97 57 36 6 b
DC150-08-05.000A1- 5 48 97 57 36 6 b
DC150-08-05.100A1- 5,1 48 97 57 36 6 b
DC150-08-05.159A1- 5,159 13/64“ 48 97 57 36 6 b
DC150-08-05.200A1- 5,2 48 97 57 36 6 b
DC150-08-05.300A1- 5,3 48 97 57 36 6 b
DC150-08-05.400A1- 5,4 48 97 57 36 6 b
DC150-08-05.500A1- 5,5 48 97 57 36 6 b
DC150-08-05.556A1- 5,556 7/32“ 48 97 57 36 6 b
DC150-08-05.600A1- 5,6 48 97 57 36 6 b
DC150-08-05.700A1- 5,7 48 97 57 36 6 b
DC150-08-05.800A1- 5,8 48 97 57 36 6 b
DC150-08-05.900A1- 5,9 48 97 57 36 6 b
DC150-08-05.953A1- 5,953 15/64“ 48 97 57 36 6 b
DC150-08-06.000A1- 6 48 97 57 36 6 b
DC150-08-06.100A1- 6,1 55 106 66 36 8 b
DC150-08-06.200A1- 6,2 55 106 66 36 8 b
DC150-08-06.300A1- 6,3 55 106 66 36 8 b
DC150-08-06.350A1- 6,35 1/4“ 55 106 66 36 8 b
Ordering example for the WJ30TA grade: DC150-08-03.000A1-WJ30TA Continued
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 416 B 430

Solid drilling
B1
Continued
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-08-06.400A1- 6,4 55 106 66 36 8 b
DC150-08-06.500A1- 6,5 55 106 66 36 8 b
Dc d1
DC150-08-06.600A1- 6,6 55 106 66 36 8 b
DC150-08-06.700A1- 6,7 55 106 66 36 8 b
Lc
l2 l5
DC150-08-06.747A1- 6,747 17/64“ 55 106 66 36 8 b
l1 DC150-08-06.800A1- 6,8 55 106 66 36 8 b
DC150-08-06.900A1- 6,9 55 106 66 36 8 b
DC150-08-07.000A1- 7 55 106 66 36 8 b
DC150-08-07.100A1- 7,1 64 116 76 36 8 b
DC150-08-07.144A1- 7,144 9/32“ 64 116 76 36 8 b
DC150-08-07.200A1- 7,2 64 116 76 36 8 b
DC150-08-07.300A1- 7,3 64 116 76 36 8 b
DC150-08-07.400A1- 7,4 64 116 76 36 8 b
DC150-08-07.500A1- 7,5 64 116 76 36 8 b
DC150-08-07.541A1- 7,541 19/64“ 64 116 76 36 8 b
DC150-08-07.600A1- 7,6 64 116 76 36 8 b
DC150-08-07.700A1- 7,7 64 116 76 36 8 b
DC150-08-07.800A1- 7,8 64 116 76 36 8 b
DC150-08-07.900A1- 7,9 64 116 76 36 8 b
DC150-08-07.938A1- 7,938 5/16“ 64 116 76 36 8 b
DC150-08-08.000A1- 8 64 116 76 36 8 b
DC150-08-08.100A1- 8,1 80 139 95 40 10 b
DC150-08-08.200A1- 8,2 80 139 95 40 10 b
DC150-08-08.300A1- 8,3 80 139 95 40 10 b
DC150-08-08.334A1- 8,334 21/64“ 80 139 95 40 10 b
DC150-08-08.400A1- 8,4 80 139 95 40 10 b
DC150-08-08.500A1- 8,5 80 139 95 40 10 b
DC150-08-08.600A1- 8,6 80 139 95 40 10 b
DC150-08-08.700A1- 8,7 80 139 95 40 10 b
DC150-08-08.731A1- 8,731 11/32“ 80 139 95 40 10 b
DC150-08-08.800A1- 8,8 80 139 95 40 10 b
DC150-08-08.900A1- 8,9 80 139 95 40 10 b
DC150-08-09.000A1- 9 80 139 95 40 10 b
DC150-08-09.100A1- 9,1 80 139 95 40 10 b
DC150-08-09.128A1- 9,128 23/64“ 80 139 95 40 10 b
DC150-08-09.200A1- 9,2 80 139 95 40 10 b
DC150-08-09.300A1- 9,3 80 139 95 40 10 b
DC150-08-09.400A1- 9,4 80 139 95 40 10 b
DC150-08-09.500A1- 9,5 80 139 95 40 10 b
DC150-08-09.525A1- 9,525 3/8“ 80 139 95 40 10 b
DC150-08-09.600A1- 9,6 80 139 95 40 10 b
DC150-08-09.700A1- 9,7 80 139 95 40 10 b
DC150-08-09.800A1- 9,8 80 139 95 40 10 b
DC150-08-09.900A1- 9,9 80 139 95 40 10 b
DC150-08-09.922A1- 9,922 25/64“ 80 139 95 40 10 b
DC150-08-10.000A1- 10 80 139 95 40 10 b
DC150-08-10.100A1- 10,1 96 163 114 45 12 b
DC150-08-10.200A1- 10,2 96 163 114 45 12 b
DC150-08-10.300A1- 10,3 96 163 114 45 12 b
DC150-08-10.319A1- 10,319 13/32“ 96 163 114 45 12 b
DC150-08-10.400A1- 10,4 96 163 114 45 12 b
DC150-08-10.500A1- 10,5 96 163 114 45 12 b
DC150-08-10.700A1- 10,7 96 163 114 45 12 b
DC150-08-10.716A1- 10,716 27/64“ 96 163 114 45 12 b
DC150-08-10.800A1- 10,8 96 163 114 45 12 b
DC150-08-10.900A1- 10,9 96 163 114 45 12 b
DC150-08-11.000A1- 11 96 163 114 45 12 b
DC150-08-11.100A1- 11,1 96 163 114 45 12 b
DC150-08-11.113A1- 11,113 7/16“ 96 163 114 45 12 b
DC150-08-11.200A1- 11,2 96 163 114 45 12 b
DC150-08-11.300A1- 11,3 96 163 114 45 12 b
XIII D1 B 416 B 430

Solid drilling
B1
Continued
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-08-11.500A1- 11,5 96 163 114 45 12 b
DC150-08-11.600A1- 11,6 96 163 114 45 12 b
Dc d1
DC150-08-11.700A1- 11,7 96 163 114 45 12 b
DC150-08-11.800A1- 11,8 96 163 114 45 12 b
Lc
l2 l5
DC150-08-11.900A1- 11,9 96 163 114 45 12 b
l1 DC150-08-11.906A1- 11,906 15/32“ 96 163 114 45 12 b
DC150-08-12.000A1- 12 96 163 114 45 12 b
DC150-08-12.303A1- 12,303 31/64“ 119 182 133 45 14 b
DC150-08-12.500A1- 12,5 119 182 133 45 14 b
DC150-08-12.700A1- 12,7 1/2“ 119 182 133 45 14 b
DC150-08-13.000A1- 13 119 182 133 45 14 b
DC150-08-13.494A1- 13,494 17/32“ 119 182 133 45 14 b
DC150-08-13.500A1- 13,5 119 182 133 45 14 b
DC150-08-14.000A1- 14 119 182 133 45 14 b
DC150-08-14.288A1- 14,288 9/16“ 136 204 152 48 16 b
DC150-08-14.500A1- 14,5 136 204 152 48 16 b
DC150-08-15.000A1- 15 136 204 152 48 16 b
DC150-08-15.500A1- 15,5 136 204 152 48 16 b
DC150-08-15.875A1- 15,875 5/8“ 136 204 152 48 16 b
DC150-08-16.000A1- 16 136 204 152 48 16 b
DC150-08-16.500A1- 16,5 153 223 171 48 18 b
DC150-08-17.000A1- 17 153 223 171 48 18 b
DC150-08-17.500A1- 17,5 153 223 171 48 18 b
DC150-08-18.000A1- 18 153 223 171 48 18 b
DC150-08-18.500A1- 18,5 170 244 190 50 20 b
DC150-08-19.000A1- 19 170 244 190 50 20 b
DC150-08-19.050A1- 19,05 3/4“ 170 244 190 50 20 b
DC150-08-19.500A1- 19,5 170 244 190 50 20 b
DC150-08-20.000A1- 20 170 244 190 50 20 b
Ordering example for the WJ30TA grade: DC150-08-03.000A1-WJ30TA
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 416 B 430

Solid drilling
B1
DC170 Supreme
12×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-12-03.000A1- 3 48 92 54 36 6 b
DC170-12-03.100A1- 3,1 48 92 54 36 6 b
Dc d1
DC170-12-03.175A1- 3,175 1/8“ 48 92 54 36 6 b
DC170-12-03.200A1- 3,2 48 92 54 36 6 b
Lc
l2 l5
DC170-12-03.300A1- 3,3 48 92 54 36 6 b
l1 DC170-12-03.400A1- 3,4 48 92 54 36 6 b
DC170-12-03.500A1- 3,5 48 92 54 36 6 b
DC170-12-03.572A1- 3,572 9/64“ 48 92 54 36 6 b
DC170-12-03.600A1- 3,6 48 92 54 36 6 b
DC170-12-03.700A1- 3,7 48 92 54 36 6 b
DC170-12-03.800A1- 3,8 56 102 64 36 6 b
DC170-12-03.900A1- 3,9 56 102 64 36 6 b
DC170-12-03.969A1- 3,969 5/32“ 56 102 64 36 6 b
DC170-12-04.000A1- 4 56 102 64 36 6 b
DC170-12-04.100A1- 4,1 56 102 64 36 6 b
DC170-12-04.200A1- 4,2 56 102 64 36 6 b
DC170-12-04.300A1- 4,3 56 102 64 36 6 b
DC170-12-04.366A1- 4,366 11/64“ 56 102 64 36 6 b
DC170-12-04.400A1- 4,4 56 102 64 36 6 b
DC170-12-04.500A1- 4,5 56 102 64 36 6 b
DC170-12-04.600A1- 4,6 56 102 64 36 6 b
DC170-12-04.700A1- 4,7 56 102 64 36 6 b
DC170-12-04.763A1- 4,763 3/16“ 74 121 83 36 6 b
DC170-12-04.800A1- 4,8 74 121 83 36 6 b
DC170-12-04.900A1- 4,9 74 121 83 36 6 b
DC170-12-05.000A1- 5 74 121 83 36 6 b
DC170-12-05.100A1- 5,1 74 121 83 36 6 b
DC170-12-05.159A1- 5,159 13/64“ 74 121 83 36 6 b
DC170-12-05.200A1- 5,2 74 121 83 36 6 b
DC170-12-05.300A1- 5,3 74 121 83 36 6 b
DC170-12-05.400A1- 5,4 74 121 83 36 6 b
DC170-12-05.500A1- 5,5 74 121 83 36 6 b
DC170-12-05.550A1- 5,55 74 121 83 36 6 b
DC170-12-05.556A1- 5,556 7/32“ 74 121 83 36 6 b
DC170-12-05.600A1- 5,6 74 121 83 36 6 b
DC170-12-05.700A1- 5,7 74 121 83 36 6 b
DC170-12-05.800A1- 5,8 74 121 83 36 6 b
DC170-12-05.900A1- 5,9 74 121 83 36 6 b
DC170-12-06.000A1- 6 74 121 83 36 6 b
DC170-12-06.100A1- 6,1 98 148 110 36 8 b
DC170-12-06.200A1- 6,2 98 148 110 36 8 b
DC170-12-06.300A1- 6,3 98 148 110 36 8 b
DC170-12-06.350A1- 6,35 1/4“ 98 148 110 36 8 b
DC170-12-06.400A1- 6,4 98 148 110 36 8 b
DC170-12-06.500A1- 6,5 98 148 110 36 8 b
DC170-12-06.600A1- 6,6 98 148 110 36 8 b
DC170-12-06.700A1- 6,7 98 148 110 36 8 b
XIII D1 B 416 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-12-06.747A1- 6,747 17/64“ 98 148 110 36 8 b
DC170-12-06.800A1- 6,8 98 148 110 36 8 b
Dc d1
DC170-12-06.900A1- 6,9 98 148 110 36 8 b
DC170-12-07.000A1- 7 98 148 110 36 8 b
Lc
l2 l5
DC170-12-07.100A1- 7,1 98 148 110 36 8 b
l1 DC170-12-07.144A1- 7,144 9/32“ 98 148 110 36 8 b
DC170-12-07.200A1- 7,2 98 148 110 36 8 b
DC170-12-07.300A1- 7,3 98 148 110 36 8 b
DC170-12-07.400A1- 7,4 98 148 110 36 8 b
DC170-12-07.500A1- 7,5 98 148 110 36 8 b
DC170-12-07.541A1- 7,541 19/64“ 98 148 110 36 8 b
DC170-12-07.800A1- 7,8 98 148 110 36 8 b
DC170-12-07.900A1- 7,9 98 148 110 36 8 b
DC170-12-07.938A1- 7,938 5/16“ 98 148 110 36 8 b
DC170-12-08.000A1- 8 98 148 110 36 8 b
DC170-12-08.100A1- 8,1 123 180 138 40 10 b
DC170-12-08.200A1- 8,2 123 180 138 40 10 b
DC170-12-08.300A1- 8,3 123 180 138 40 10 b
DC170-12-08.400A1- 8,4 123 180 138 40 10 b
DC170-12-08.500A1- 8,5 123 180 138 40 10 b
DC170-12-08.600A1- 8,6 123 180 138 40 10 b
DC170-12-08.700A1- 8,7 123 180 138 40 10 b
DC170-12-08.731A1- 8,731 11/32“ 123 180 138 40 10 b
DC170-12-08.800A1- 8,8 123 180 138 40 10 b
DC170-12-09.000A1- 9 123 180 138 40 10 b
DC170-12-09.128A1- 9,128 23/64“ 123 180 138 40 10 b
DC170-12-09.200A1- 9,2 123 180 138 40 10 b
DC170-12-09.300A1- 9,3 123 180 138 40 10 b
DC170-12-09.500A1- 9,5 123 180 138 40 10 b
DC170-12-09.525A1- 9,525 3/8“ 123 180 138 40 10 b
DC170-12-09.600A1- 9,6 123 180 138 40 10 b
DC170-12-09.700A1- 9,7 123 180 138 40 10 b
DC170-12-09.800A1- 9,8 123 180 138 40 10 b
DC170-12-09.922A1- 9,922 25/64“ 123 180 138 40 10 b
DC170-12-10.000A1- 10 123 180 138 40 10 b
DC170-12-10.100A1- 10,1 140 206 158 45 12 b
DC170-12-10.200A1- 10,2 140 206 158 45 12 b
DC170-12-10.300A1- 10,3 140 206 158 45 12 b
DC170-12-10.319A1- 10,319 13/32“ 140 206 158 45 12 b
DC170-12-10.400A1- 10,4 140 206 158 45 12 b
DC170-12-10.500A1- 10,5 140 206 158 45 12 b
DC170-12-10.716A1- 10,716 27/64“ 140 206 158 45 12 b
DC170-12-10.800A1- 10,8 140 206 158 45 12 b
DC170-12-11.000A1- 11 140 206 158 45 12 b
DC170-12-11.100A1- 11,1 140 206 158 45 12 b
DC170-12-11.113A1- 11,113 7/16“ 140 206 158 45 12 b
DC170-12-11.200A1- 11,2 140 206 158 45 12 b
DC170-12-11.500A1- 11,5 140 206 158 45 12 b
DC170-12-11.509A1- 11,509 29/64“ 140 206 158 45 12 b
DC170-12-11.700A1- 11,7 140 206 158 45 12 b
DC170-12-11.800A1- 11,8 140 206 158 45 12 b
DC170-12-11.906A1- 11,906 15/32“ 140 206 158 45 12 b
DC170-12-12.000A1- 12 140 206 158 45 12 b
DC170-12-12.100A1- 12,1 168 230 182 45 14 b
DC170-12-12.200A1- 12,2 168 230 182 45 14 b
DC170-12-12.300A1- 12,3 168 230 182 45 14 b
DC170-12-12.303A1- 12,303 31/64“ 168 230 182 45 14 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 416 B 430

Solid drilling
B1
Continued
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-12-12.500A1- 12,5 168 230 182 45 14 b
DC170-12-12.600A1- 12,6 168 230 182 45 14 b
Dc d1
DC170-12-12.700A1- 12,7 1/2“ 168 230 182 45 14 b
DC170-12-13.000A1- 13 168 230 182 45 14 b
Lc
l2 l5
DC170-12-13.494A1- 13,494 17/32“ 168 230 182 45 14 b
l1 DC170-12-13.500A1- 13,5 168 230 182 45 14 b
DC170-12-14.000A1- 14 168 230 182 45 14 b
DC170-12-14.288A1- 14,288 9/16“ 192 260 208 48 16 b
DC170-12-14.500A1- 14,5 192 260 208 48 16 b
DC170-12-15.000A1- 15 192 260 208 48 16 b
DC170-12-15.500A1- 15,5 192 260 208 48 16 b
DC170-12-15.875A1- 15,875 5/8“ 192 260 208 48 16 b
DC170-12-16.000A1- 16 192 260 208 48 16 b
DC170-12-16.500A1- 16,5 216 285 234 48 18 b
DC170-12-17.000A1- 17 216 285 234 48 18 b
DC170-12-17.500A1- 17,5 216 285 234 48 18 b
DC170-12-18.000A1- 18 216 285 234 48 18 b
DC170-12-18.500A1- 18,5 238 310 258 50 20 b
DC170-12-19.000A1- 19 238 310 258 50 20 b
DC170-12-19.500A1- 19,5 238 310 258 50 20 b
DC170-12-20.000A1- 20 238 310 258 50 20 b
XIII D1 B 416 B 430

Solid drilling
B1
A6589AMP
X·treme DM12
12×Dc
140°
P M K N S H O
Dc d1
Designation h7 Dc Lc l1 l2 l5 h6
Shank DIN 6535 HA A6589AMP-2 2 28 72 31 36 3
A6589AMP-2.1 2,1 29 72 33 35 3
Dc
A6589AMP-2.2 2,2 30 72 34 34 3
d1 A6589AMP-2.3 2,3 32 77 36 37 3
Lc A6589AMP-3/32IN 2,381 3/32“ 33 77 37 36 3
l2 l5
l1
A6589AMP-2.4 2,4 33 77 37 36 3
A6589AMP-2.5 2,5 35 77 39 34 3
A6589AMP-2.6 2,6 36 83 40 39 3
A6589AMP-2.7 2,7 37 83 42 38 3
A6589AMP-7/64IN 2,778 7/64“ 38 83 43 37 3
A6589AMP-2.8 2,8 38 83 43 37 3
A6589AMP-2.9 2,9 40 83 45 35 3
plication
Primary ap
ation
Other applic
XIII D1 B 416 B 430

Solid drilling
B1
A6588TML
Alpha® 4 Plus Micro
12×Dc
140°
P M K N S H O
TML CC CC CC CC CC C CC
Dc d1
TML mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6588TML-1 1 18 55 21 25 3
A6588TML-1.1 1,1 18 55 21 26 3
Dc
A6588TML-3/64IN 1,191 3/64“ 18 55 21 26 3
d1 A6588TML-1.2 1,2 18 55 21 26 3
Lc A6588TML-1.3 1,3 18 55 21 26 3
l2 l5
l1
A6588TML-1.4 1,4 18 55 21 26 3
A6588TML-1.5 1,5 25 68 28 33 3
A6588TML-1/16IN 1,588 1/16“ 25 68 28 33 3
A6588TML-1.6 1,6 25 68 28 33 3
A6588TML-1.7 1,7 25 68 28 33 3
A6588TML-1.8 1,8 25 68 28 34 3
A6588TML-1.9 1,9 25 68 28 34 3
D1 B 416 B 430

Solid drilling
B1
A6589DPP
X·treme D12
12×Dc
140°
P M K N S H O
DPP CC CC CC CC CC CC C
Dc d1
Shank DIN 6535 HA A6589DPP-3 3 48 92 54 36 6
A6589DPP-3.1 3,1 48 92 54 36 6
Dc d1
A6589DPP-1/8IN 3,175 1/8“ 48 92 54 36 6
A6589DPP-3.2 3,2 48 92 54 36 6
Lc A6589DPP-3.3 3,3 48 92 54 36 6
l2 l5
l1 A6589DPP-3.4 3,4 48 92 54 36 6
A6589DPP-3.5 3,5 48 92 54 36 6
A6589DPP-9/64IN 3,572 9/64“ 48 92 54 36 6
A6589DPP-3.6 3,6 48 92 54 36 6
A6589DPP-3.7 3,7 48 92 54 36 6
A6589DPP-3.8 3,8 56 102 64 36 6
A6589DPP-3.9 3,9 56 102 64 36 6
A6589DPP-5/32IN 3,969 5/32“ 56 102 64 36 6
A6589DPP-4 4 56 102 64 36 6
A6589DPP-4.1 4,1 56 102 64 36 6
A6589DPP-4.2 4,2 56 102 64 36 6
A6589DPP-4.3 4,3 56 102 64 36 6
A6589DPP-11/64IN 4,366 11/64“ 56 102 64 36 6
A6589DPP-4.4 4,4 56 102 64 36 6
A6589DPP-4.5 4,5 56 102 64 36 6
A6589DPP-4.6 4,6 56 102 64 36 6
A6589DPP-4.7 4,7 56 102 64 36 6
A6589DPP-3/16IN 4,763 3/16“ 74 121 83 36 6
A6589DPP-4.8 4,8 74 121 83 36 6
A6589DPP-4.9 4,9 74 121 83 36 6
A6589DPP-5 5 74 121 83 36 6
A6589DPP-5.1 5,1 74 121 83 36 6
A6589DPP-13/64IN 5,159 13/64“ 74 121 83 36 6
A6589DPP-5.2 5,2 74 121 83 36 6
A6589DPP-5.3 5,3 74 121 83 36 6
A6589DPP-5.4 5,4 74 121 83 36 6
A6589DPP-5.5 5,5 74 121 83 36 6
A6589DPP-5.55 5,55 74 121 83 36 6
A6589DPP-7/32IN 5,556 7/32“ 74 121 83 36 6
A6589DPP-5.6 5,6 74 121 83 36 6
A6589DPP-5.7 5,7 74 121 83 36 6
A6589DPP-5.8 5,8 74 121 83 36 6
A6589DPP-5.9 5,9 74 121 83 36 6
A6589DPP-6 6 74 121 83 36 6
A6589DPP-6.1 6,1 98 148 110 36 8
A6589DPP-6.2 6,2 98 148 110 36 8
A6589DPP-6.3 6,3 98 148 110 36 8
A6589DPP-1/4IN 6,35 1/4“ 98 148 110 36 8
A6589DPP-6.4 6,4 98 148 110 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 416 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A6589DPP-6.5 6,5 98 148 110 36 8
A6589DPP-6.6 6,6 98 148 110 36 8
Dc d1
A6589DPP-6.7 6,7 98 148 110 36 8
A6589DPP-17/64IN 6,747 17/64“ 98 148 110 36 8
Lc A6589DPP-6.8 6,8 98 148 110 36 8
l2 l5
l1 A6589DPP-6.9 6,9 98 148 110 36 8
A6589DPP-7 7 98 148 110 36 8
A6589DPP-7.1 7,1 98 148 110 36 8
A6589DPP-9/32IN 7,144 9/32“ 98 148 110 36 8
A6589DPP-7.2 7,2 98 148 110 36 8
A6589DPP-7.3 7,3 98 148 110 36 8
A6589DPP-7.4 7,4 98 148 110 36 8
A6589DPP-7.5 7,5 98 148 110 36 8
A6589DPP-19/64IN 7,541 19/64“ 98 148 110 36 8
A6589DPP-7.8 7,8 98 148 110 36 8
A6589DPP-7.9 7,9 98 148 110 36 8
A6589DPP-5/16IN 7,938 5/16“ 98 148 110 36 8
A6589DPP-8 8 98 148 110 36 8
A6589DPP-8.1 8,1 123 180 138 40 10
A6589DPP-8.2 8,2 123 180 138 40 10
A6589DPP-8.3 8,3 123 180 138 40 10
A6589DPP-8.4 8,4 123 180 138 40 10
A6589DPP-8.5 8,5 123 180 138 40 10
A6589DPP-8.6 8,6 123 180 138 40 10
A6589DPP-8.7 8,7 123 180 138 40 10
A6589DPP-11/32IN 8,731 11/32“ 123 180 138 40 10
A6589DPP-8.8 8,8 123 180 138 40 10
A6589DPP-9 9 123 180 138 40 10
A6589DPP-23/64IN 9,128 23/64“ 123 180 138 40 10
A6589DPP-9.2 9,2 123 180 138 40 10
A6589DPP-9.3 9,3 123 180 138 40 10
A6589DPP-9.5 9,5 123 180 138 40 10
A6589DPP-3/8IN 9,525 3/8“ 123 180 138 40 10
A6589DPP-9.6 9,6 123 180 138 40 10
A6589DPP-9.7 9,7 123 180 138 40 10
A6589DPP-9.8 9,8 123 180 138 40 10
A6589DPP-25/64IN 9,922 25/64“ 123 180 138 40 10
A6589DPP-10 10 123 180 138 40 10
A6589DPP-10.1 10,1 140 206 158 45 12
A6589DPP-10.2 10,2 140 206 158 45 12
A6589DPP-10.3 10,3 140 206 158 45 12
A6589DPP-13/32IN 10,319 13/32“ 140 206 158 45 12
A6589DPP-10.4 10,4 140 206 158 45 12
A6589DPP-10.5 10,5 140 206 158 45 12
A6589DPP-27/64IN 10,716 27/64“ 140 206 158 45 12
A6589DPP-10.8 10,8 140 206 158 45 12
A6589DPP-11 11 140 206 158 45 12
A6589DPP-11.1 11,1 140 206 158 45 12
A6589DPP-7/16IN 11,113 7/16“ 140 206 158 45 12
A6589DPP-11.2 11,2 140 206 158 45 12
A6589DPP-11.5 11,5 140 206 158 45 12
A6589DPP-29/64IN 11,509 29/64“ 140 206 158 45 12
A6589DPP-11.7 11,7 140 206 158 45 12
A6589DPP-11.8 11,8 140 206 158 45 12
A6589DPP-15/32IN 11,906 15/32“ 140 206 158 45 12
A6589DPP-12 12 140 206 158 45 12
A6589DPP-12.1 12,1 168 230 182 45 14
A6589DPP-12.2 12,2 168 230 182 45 14
A6589DPP-12.3 12,3 168 230 182 45 14
A6589DPP-31/64IN 12,303 31/64“ 168 230 182 45 14
A6589DPP-12.5 12,5 168 230 182 45 14
A6589DPP-12.6 12,6 168 230 182 45 14
Continued
XIII D1 B 416 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A6589DPP-1/2IN 12,7 1/2“ 168 230 182 45 14
A6589DPP-13 13 168 230 182 45 14
Dc d1
A6589DPP-17/32IN 13,494 17/32“ 168 230 182 45 14
A6589DPP-13.5 13,5 168 230 182 45 14
Lc A6589DPP-14 14 168 230 182 45 14
l2 l5
l1 A6589DPP-9/16IN 14,288 9/16“ 192 260 208 48 16
A6589DPP-14.5 14,5 192 260 208 48 16
A6589DPP-15 15 192 260 208 48 16
A6589DPP-15.5 15,5 192 260 208 48 16
A6589DPP-5/8IN 15,875 5/8“ 192 260 208 48 16
A6589DPP-16 16 192 260 208 48 16
A6589DPP-16.5 16,5 216 285 234 48 18
A6589DPP-17 17 216 285 234 48 18
A6589DPP-17.5 17,5 216 285 234 48 18
A6589DPP-18 18 216 285 234 48 18
A6589DPP-18.5 18,5 238 310 258 50 20
A6589DPP-19 19 238 310 258 50 20
A6589DPP-19.5 19,5 238 310 258 50 20
A6589DPP-20 20 238 310 258 50 20
plication
Primary ap
ation
Other applic
XIII D1 B 416 B 430

Solid drilling
B1
Solid carbide drills with coolant-through,
straight-fluted
A3687
Alpha® Jet
12×Dc
120°
P M K N S H O
Uncoated C C C C
Dc d1
Shank DIN 6535 HA A3687-5 5 79 132 94 36 6
A3687-5.5 5,5 83 139 101 36 6
A3687-6 6 83 139 101 36 6
Dc d1
A3687-6.5 6,5 107 165 127 36 8
Lc A3687-6.8 6,8 107 165 127 36 8
l2 l5 A3687-7 7 107 165 127 36 8
l1
A3687-7.5 7,5 107 165 127 36 8
A3687-8 8 107 165 127 36 8
A3687-8.5 8,5 122 184 142 40 10
A3687-9 9 122 184 142 40 10
A3687-10 10 122 184 142 40 10
A3687-10.2 10,2 134 205 158 45 12
A3687-10.5 10,5 134 205 158 45 12
A3687-11 11 134 205 158 45 12
A3687-11.5 11,5 134 205 158 45 12
A3687-12 12 134 205 158 45 12
A3687-12.5 12,5 139 214 167 45 14
A3687-13 13 139 214 167 45 14
A3687-14 14 139 214 167 45 14
A3687-15 15 153 227 177 48 16
A3687-16 16 153 227 177 48 16
A3687-17 17 164 241 191 48 18
A3687-18 18 164 241 191 48 18
A3687-20 20 172 254 202 50 20
XIII D1 B 416 B 430

Solid drilling
B1
DC150 Perform
12×Dc
140°
P M K N S H O
WJ30TA CC C CC CC CC CC C
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-12-03.000A1- 3 48 92 54 36 6 b
DC150-12-03.100A1- 3,1 48 92 54 36 6 b
Dc d1
DC150-12-03.175A1- 3,175 1/8“ 48 92 54 36 6 b
DC150-12-03.200A1- 3,2 48 92 54 36 6 b
Lc
l2 l5
DC150-12-03.300A1- 3,3 48 92 54 36 6 b
l1 DC150-12-03.400A1- 3,4 48 92 54 36 6 b
DC150-12-03.500A1- 3,5 48 92 54 36 6 b
DC150-12-03.572A1- 3,572 9/64“ 48 92 54 36 6 b
DC150-12-03.600A1- 3,6 48 92 54 36 6 b
DC150-12-03.700A1- 3,7 48 92 54 36 6 b
DC150-12-03.800A1- 3,8 56 102 64 36 6 b
DC150-12-03.900A1- 3,9 56 102 64 36 6 b
DC150-12-03.969A1- 3,969 5/32“ 56 102 64 36 6 b
DC150-12-04.000A1- 4 56 102 64 36 6 b
DC150-12-04.100A1- 4,1 56 102 64 36 6 b
DC150-12-04.200A1- 4,2 56 102 64 36 6 b
DC150-12-04.300A1- 4,3 56 102 64 36 6 b
DC150-12-04.366A1- 4,366 11/64“ 56 102 64 36 6 b
DC150-12-04.400A1- 4,4 56 102 64 36 6 b
DC150-12-04.500A1- 4,5 56 102 64 36 6 b
DC150-12-04.600A1- 4,6 56 102 64 36 6 b
DC150-12-04.700A1- 4,7 56 102 64 36 6 b
DC150-12-04.763A1- 4,763 3/16“ 74 121 83 36 6 b
DC150-12-04.800A1- 4,8 74 121 83 36 6 b
DC150-12-04.900A1- 4,9 74 121 83 36 6 b
DC150-12-05.000A1- 5 74 121 83 36 6 b
DC150-12-05.100A1- 5,1 74 121 83 36 6 b
DC150-12-05.159A1- 5,159 13/64“ 74 121 83 36 6 b
DC150-12-05.200A1- 5,2 74 121 83 36 6 b
DC150-12-05.300A1- 5,3 74 121 83 36 6 b
DC150-12-05.400A1- 5,4 74 121 83 36 6 b
DC150-12-05.500A1- 5,5 74 121 83 36 6 b
DC150-12-05.550A1- 5,55 74 121 83 36 6 b
DC150-12-05.556A1- 5,556 7/32“ 74 121 83 36 6 b
DC150-12-05.600A1- 5,6 74 121 83 36 6 b
DC150-12-05.700A1- 5,7 74 121 83 36 6 b
DC150-12-05.800A1- 5,8 74 121 83 36 6 b
DC150-12-05.900A1- 5,9 74 121 83 36 6 b
DC150-12-06.000A1- 6 74 121 83 36 6 b
DC150-12-06.100A1- 6,1 98 148 110 36 8 b
DC150-12-06.200A1- 6,2 98 148 110 36 8 b
DC150-12-06.300A1- 6,3 98 148 110 36 8 b
DC150-12-06.350A1- 6,35 1/4“ 98 148 110 36 8 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 418 B 430

Solid drilling
B1
Continued
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-12-06.400A1- 6,4 98 148 110 36 8 b
DC150-12-06.500A1- 6,5 98 148 110 36 8 b
Dc d1
DC150-12-06.600A1- 6,6 98 148 110 36 8 b
DC150-12-06.700A1- 6,7 98 148 110 36 8 b
Lc
l2 l5
DC150-12-06.747A1- 6,747 17/64“ 98 148 110 36 8 b
l1 DC150-12-06.800A1- 6,8 98 148 110 36 8 b
DC150-12-06.900A1- 6,9 98 148 110 36 8 b
DC150-12-07.000A1- 7 98 148 110 36 8 b
DC150-12-07.100A1- 7,1 98 148 110 36 8 b
DC150-12-07.144A1- 7,144 9/32“ 98 148 110 36 8 b
DC150-12-07.200A1- 7,2 98 148 110 36 8 b
DC150-12-07.300A1- 7,3 98 148 110 36 8 b
DC150-12-07.400A1- 7,4 98 148 110 36 8 b
DC150-12-07.500A1- 7,5 98 148 110 36 8 b
DC150-12-07.541A1- 7,541 19/64“ 98 148 110 36 8 b
DC150-12-07.800A1- 7,8 98 148 110 36 8 b
DC150-12-07.900A1- 7,9 98 148 110 36 8 b
DC150-12-07.938A1- 7,938 5/16“ 98 148 110 36 8 b
DC150-12-08.000A1- 8 98 148 110 36 8 b
DC150-12-08.100A1- 8,1 123 180 138 40 10 b
DC150-12-08.200A1- 8,2 123 180 138 40 10 b
DC150-12-08.300A1- 8,3 123 180 138 40 10 b
DC150-12-08.400A1- 8,4 123 180 138 40 10 b
DC150-12-08.500A1- 8,5 123 180 138 40 10 b
DC150-12-08.600A1- 8,6 123 180 138 40 10 b
DC150-12-08.700A1- 8,7 123 180 138 40 10 b
DC150-12-08.731A1- 8,731 11/32“ 123 180 138 40 10 b
DC150-12-08.800A1- 8,8 123 180 138 40 10 b
DC150-12-09.000A1- 9 123 180 138 40 10 b
DC150-12-09.128A1- 9,128 23/64“ 123 180 138 40 10 b
DC150-12-09.200A1- 9,2 123 180 138 40 10 b
DC150-12-09.300A1- 9,3 123 180 138 40 10 b
DC150-12-09.500A1- 9,5 123 180 138 40 10 b
DC150-12-09.525A1- 9,525 3/8“ 123 180 138 40 10 b
DC150-12-09.600A1- 9,6 123 180 138 40 10 b
DC150-12-09.700A1- 9,7 123 180 138 40 10 b
DC150-12-09.800A1- 9,8 123 180 138 40 10 b
DC150-12-09.922A1- 9,922 25/64“ 123 180 138 40 10 b
DC150-12-10.000A1- 10 123 180 138 40 10 b
DC150-12-10.100A1- 10,1 140 206 158 45 12 b
DC150-12-10.200A1- 10,2 140 206 158 45 12 b
DC150-12-10.300A1- 10,3 140 206 158 45 12 b
DC150-12-10.319A1- 10,319 13/32“ 140 206 158 45 12 b
DC150-12-10.500A1- 10,5 140 206 158 45 12 b
DC150-12-10.716A1- 10,716 27/64“ 140 206 158 45 12 b
DC150-12-10.800A1- 10,8 140 206 158 45 12 b
DC150-12-11.000A1- 11 140 206 158 45 12 b
DC150-12-11.100A1- 11,1 140 206 158 45 12 b
DC150-12-11.113A1- 11,113 7/16“ 140 206 158 45 12 b
DC150-12-11.200A1- 11,2 140 206 158 45 12 b
DC150-12-11.500A1- 11,5 140 206 158 45 12 b
DC150-12-11.509A1- 11,509 29/64“ 140 206 158 45 12 b
DC150-12-11.700A1- 11,7 140 206 158 45 12 b
DC150-12-11.800A1- 11,8 140 206 158 45 12 b
DC150-12-11.906A1- 11,906 15/32“ 140 206 158 45 12 b
DC150-12-12.000A1- 12 140 206 158 45 12 b
DC150-12-12.100A1- 12,1 168 230 182 45 14 b
DC150-12-12.200A1- 12,2 168 230 182 45 14 b
DC150-12-12.300A1- 12,3 168 230 182 45 14 b
DC150-12-12.303A1- 12,303 31/64“ 168 230 182 45 14 b
DC150-12-12.500A1- 12,5 168 230 182 45 14 b
XIII D1 B 418 B 430

Solid drilling
B1
Continued
WJ30TA
Dc Dc d1
Shank DIN 6535 HA DC150-12-12.600A1- 12,6 168 230 182 45 14 b
DC150-12-12.700A1- 12,7 1/2“ 168 230 182 45 14 b
Dc d1
DC150-12-13.000A1- 13 168 230 182 45 14 b
DC150-12-13.494A1- 13,494 17/32“ 168 230 182 45 14 b
Lc
l2 l5
DC150-12-13.500A1- 13,5 168 230 182 45 14 b
l1 DC150-12-14.000A1- 14 168 230 182 45 14 b
DC150-12-14.288A1- 14,288 9/16“ 192 260 208 48 16 b
DC150-12-14.500A1- 14,5 192 260 208 48 16 b
DC150-12-15.000A1- 15 192 260 208 48 16 b
DC150-12-15.500A1- 15,5 192 260 208 48 16 b
DC150-12-15.875A1- 15,875 5/8“ 192 260 208 48 16 b
DC150-12-16.000A1- 16 192 260 208 48 16 b
DC150-12-16.500A1- 16,5 216 285 234 48 18 b
DC150-12-17.000A1- 17 216 285 234 48 18 b
DC150-12-17.500A1- 17,5 216 285 234 48 18 b
DC150-12-18.000A1- 18 216 285 234 48 18 b
DC150-12-19.000A1- 19 238 310 258 50 20 b
DC150-12-20.000A1- 20 238 310 258 50 20 b
Ordering example for the WJ30TA grade: DC150-12-03.000A1-WJ30TA
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 418 B 430

Solid drilling
B1
DC170 Supreme
16×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
h7 inches/ Lc l1 l2 l5 h6
Shank DIN 6535 HA DC170-16-03.000A1- 3 52 89 57 28 4 b
DC170-16-03.175A1- 3,175 1/8“ 60 98 66 28 4 b
Dc d1
DC170-16-03.500A1- 3,5 72 110 78 28 4 b
DC170-16-03.572A1- 3,572 9/64“ 72 110 78 28 4 b
Lc
l2 l5
DC170-16-03.969A1- 3,969 5/32“ 72 110 78 28 4 b
l1 DC170-16-04.000A1- 4 72 110 78 28 4 b
DC170-16-04.500A1- 4,5 93 132 100 28 5 b
DC170-16-04.763A1- 4,763 3/16“ 92 132 100 28 5 b
DC170-16-04.800A1- 4,8 92 132 100 28 5 b
DC170-16-05.000A1- 5 92 132 100 28 5 b
DC170-16-05.500A1- 5,5 101 150 110 36 6 b
DC170-16-05.556A1- 5,556 7/32“ 111 160 120 36 6 b
DC170-16-05.800A1- 5,8 111 160 120 36 6 b
DC170-16-06.000A1- 6 111 160 120 36 6 b
DC170-16-06.100A1- 6,1 124 175 135 36 8 b
DC170-16-06.350A1- 6,35 1/4“ 124 175 135 36 8 b
DC170-16-06.500A1- 6,5 124 175 135 36 8 b
DC170-16-06.800A1- 6,8 124 175 135 36 8 b
DC170-16-07.000A1- 7 124 175 135 36 8 b
DC170-16-07.144A1- 7,144 9/32“ 140 192 152 36 8 b
DC170-16-07.400A1- 7,4 140 192 152 36 8 b
DC170-16-07.500A1- 7,5 140 192 152 36 8 b
DC170-16-07.938A1- 7,938 5/16“ 140 192 152 36 8 b
DC170-16-08.000A1- 8 140 192 152 36 8 b
DC170-16-08.300A1- 8,3 148 206 162 40 10 b
DC170-16-08.500A1- 8,5 148 206 162 40 10 b
DC170-16-08.731A1- 8,731 11/32“ 148 206 162 40 10 b
DC170-16-09.000A1- 9 148 206 162 40 10 b
DC170-16-09.525A1- 9,525 3/8“ 165 224 180 40 10 b
DC170-16-09.800A1- 9,8 165 224 180 40 10 b
DC170-16-10.000A1- 10 165 224 180 40 10 b
DC170-16-10.200A1- 10,2 181 247 198 45 12 b
DC170-16-10.319A1- 10,319 13/32“ 181 247 198 45 12 b
DC170-16-11.000A1- 11 181 247 198 45 12 b
DC170-16-11.113A1- 11,113 7/16“ 198 265 216 45 12 b
DC170-16-11.500A1- 11,5 198 265 216 45 12 b
DC170-16-11.800A1- 11,8 198 265 216 45 12 b
DC170-16-11.906A1- 11,906 15/32“ 198 265 216 45 12 b
DC170-16-12.000A1- 12 198 265 216 45 12 b
DC170-16-12.700A1- 12,7 1/2“ 238 301 252 45 14 b
DC170-16-13.000A1- 13 238 301 252 45 14 b
DC170-16-14.000A1- 14 238 301 252 45 14 b
DC170-16-14.288A1- 14,288 9/16“ 272 340 288 48 16 b
DC170-16-15.000A1- 15 272 340 288 48 16 b
DC170-16-16.000A1- 16 272 340 288 48 16 b
XIII D1 B 418 B 430

Solid drilling
B1
A6689AMP
X·treme DM16
16×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6689AMP-2 2 36 81 39 37 3
A6689AMP-2.1 2,1 37 81 41 36 3
Dc
A6689AMP-2.2 2,2 39 81 43 34 3
d1 A6689AMP-2.3 2,3 39 87 45 38 3
Lc A6689AMP-3/32IN 2,381 3/32“ 43 87 47 36 3
l2 l5
l1
A6689AMP-2.4 2,4 43 87 47 36 3
A6689AMP-2.5 2,5 45 87 49 34 3
A6689AMP-2.6 2,6 47 95 51 40 3
A6689AMP-2.7 2,7 48 95 53 39 3
A6689AMP-7/64IN 2,778 7/64“ 50 95 55 37 3
A6689AMP-2.8 2,8 50 95 55 37 3
A6689AMP-2.9 2,9 52 95 57 35 3
plication
Primary ap
ation
Other applic
XIII D1 B 418 B 430

Solid drilling
B1
A6685TFP
Alpha® 4 XD16
16×Dc
140°
P M K N S H O
TFP CC C CC CC CC C C
Dc d1
TFP mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6685TFP-3 3 52 100 57 36 6
A6685TFP-1/8IN 3,175 1/8“ 72 120 78 36 6
Dc d1
A6685TFP-3.5 3,5 72 120 78 36 6
A6685TFP-9/64IN 3,572 9/64“ 72 120 78 36 6
Lc A6685TFP-5/32IN 3,969 5/32“ 72 120 78 36 6
l2 l5
l1 A6685TFP-4 4 72 120 78 36 6
A6685TFP-4.5 4,5 92 140 100 36 6
A6685TFP-3/16IN 4,763 3/16“ 92 140 100 36 6
A6685TFP-4.8 4,8 92 140 100 36 6
A6685TFP-5 5 92 140 100 36 6
A6685TFP-5.5 5,5 101 150 110 36 6
A6685TFP-7/32IN 5,556 7/32“ 111 160 120 36 6
A6685TFP-5.8 5,8 111 160 120 36 6
A6685TFP-6 6 111 160 120 36 6
A6685TFP-6.1 6,1 124 175 135 36 8
A6685TFP-1/4IN 6,35 1/4“ 124 175 135 36 8
A6685TFP-6.5 6,5 124 175 135 36 8
A6685TFP-6.8 6,8 124 175 135 36 8
A6685TFP-7 7 124 175 135 36 8
A6685TFP-9/32IN 7,144 9/32“ 140 192 152 36 8
A6685TFP-7.4 7,4 140 192 152 36 8
A6685TFP-7.5 7,5 140 192 152 36 8
A6685TFP-5/16IN 7,938 5/16“ 140 192 152 36 8
A6685TFP-8 8 140 192 152 36 8
A6685TFP-8.3 8,3 148 206 162 40 10
A6685TFP-8.5 8,5 148 206 162 40 10
A6685TFP-11/32IN 8,731 11/32“ 148 206 162 40 10
A6685TFP-9 9 148 206 162 40 10
A6685TFP-3/8IN 9,525 3/8“ 165 224 180 40 10
A6685TFP-9.8 9,8 165 224 180 40 10
A6685TFP-10 10 165 224 180 40 10
A6685TFP-10.2 10,2 181 247 198 45 12
A6685TFP-13/32IN 10,319 13/32“ 181 247 198 45 12
A6685TFP-11 11 181 247 198 45 12
A6685TFP-7/16IN 11,113 7/16“ 198 265 216 45 12
A6685TFP-11.5 11,5 198 265 216 45 12
A6685TFP-11.8 11,8 198 265 216 45 12
A6685TFP-15/32IN 11,906 15/32“ 198 265 216 45 12
A6685TFP-12 12 198 265 216 45 12
A6685TFP-1/2IN 12,7 1/2“ 238 301 252 45 14
A6685TFP-13 13 238 301 252 45 14
A6685TFP-14 14 238 301 252 45 14
A6685TFP-9/16IN 14,288 9/16“ 272 340 288 48 16
A6685TFP-15 15 272 340 288 48 16
A6685TFP-16 16 272 340 288 48 16
XIII D1 B 418 B 430

Solid drilling
B1
DC170 Supreme
20×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-20-03.000A1- 3 60 97 65 28 4 b
DC170-20-03.175A1- 3,175 1/8“ 74 112 80 28 4 b
Dc d1
DC170-20-03.500A1- 3,5 86 124 92 28 4 b
DC170-20-03.572A1- 3,572 9/64“ 86 124 92 28 4 b
Lc DC170-20-03.969A1- 3,969 5/32“ 86 124 92 28 4 b
l2
l1
l5 DC170-20-04.000A1- 4 86 124 92 28 4 b
DC170-20-04.500A1- 4,5 111 150 118 28 5 b
DC170-20-04.763A1- 4,763 3/16“ 110 150 118 28 5 b
DC170-20-04.800A1- 4,8 110 150 118 28 5 b
DC170-20-05.000A1- 5 110 150 118 28 5 b
DC170-20-05.500A1- 5,5 123 170 132 36 6 b
DC170-20-05.556A1- 5,556 7/32“ 135 182 144 36 6 b
DC170-20-05.800A1- 5,8 135 182 144 36 6 b
DC170-20-06.000A1- 6 135 182 144 36 6 b
DC170-20-06.100A1- 6,1 151 200 162 36 8 b
DC170-20-06.350A1- 6,35 1/4“ 151 200 162 36 8 b
DC170-20-06.500A1- 6,5 151 200 162 36 8 b
DC170-20-06.800A1- 6,8 151 200 162 36 8 b
DC170-20-07.000A1- 7 151 200 162 36 8 b
DC170-20-07.144A1- 7,144 9/32“ 172 222 184 36 8 b
DC170-20-07.400A1- 7,4 172 222 184 36 8 b
DC170-20-07.500A1- 7,5 172 222 184 36 8 b
DC170-20-07.938A1- 7,938 5/16“ 172 222 184 36 8 b
DC170-20-08.000A1- 8 172 222 184 36 8 b
DC170-20-08.300A1- 8,3 184 240 198 40 10 b
DC170-20-08.500A1- 8,5 184 240 198 40 10 b
DC170-20-08.731A1- 8,731 11/32“ 184 240 198 40 10 b
DC170-20-09.000A1- 9 184 240 198 40 10 b
DC170-20-09.525A1- 9,525 3/8“ 205 262 220 40 10 b
DC170-20-09.800A1- 9,8 205 262 220 40 10 b
DC170-20-10.000A1- 10 205 262 220 40 10 b
DC170-20-10.200A1- 10,2 225 289 242 45 12 b
DC170-20-10.319A1- 10,319 13/32“ 225 289 242 45 12 b
DC170-20-11.000A1- 11 225 289 242 45 12 b
DC170-20-11.113A1- 11,113 7/16“ 246 311 264 45 12 b
DC170-20-11.500A1- 11,5 246 311 264 45 12 b
DC170-20-11.800A1- 11,8 246 311 264 45 12 b
DC170-20-11.906A1- 11,906 15/32“ 246 311 264 45 12 b
DC170-20-12.000A1- 12 246 311 264 45 12 b
DC170-20-12.700A1- 12,7 1/2“ 294 357 308 45 14 b
DC170-20-13.000A1- 13 294 357 308 45 14 b
DC170-20-14.000A1- 14 294 357 308 45 14 b
DC170-20-14.288A1- 14,288 9/16“ 336 404 352 48 16 b
DC170-20-15.000A1- 15 336 404 352 48 16 b
DC170-20-16.000A1- 16 336 404 352 48 16 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 418 B 430

Solid drilling
B1
Solid carbide micro drills
with coolant-through
A6789AMP
X·treme DM20
20×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6789AMP-2 2 44 90 47 38 3
A6789AMP-2.1 2,1 45 90 49 37 3
Dc
A6789AMP-2.2 2,2 48 90 52 34 3
d1 A6789AMP-2.3 2,3 50 97 54 39 3
Lc A6789AMP-3/32IN 2,381 3/32“ 52 97 56 37 3
l2 l5
l1
A6789AMP-2.4 2,4 52 97 56 37 3
A6789AMP-2.5 2,5 55 97 59 34 3
A6789AMP-2.6 2,6 57 107 61 42 3
A6789AMP-2.7 2,7 58 107 63 41 3
A6789AMP-7/64IN 2,778 7/64“ 61 107 66 38 3
A6789AMP-2.8 2,8 61 107 66 38 3
A6789AMP-2.9 2,9 63 107 68 36 3
XIII D1 B 418 B 430

Solid drilling
B1
A6794TFP
X·treme DH20
20×Dc
140°
P M K N S H O
TFP CC C C C C C
Dc d1
Shank DIN 6535 HA A6794TFP-3 3 60 107 65 36 6
A6794TFP-1/8IN 3,175 1/8“ 86 134 92 36 6
Dc d1
A6794TFP-3.5 3,5 86 134 92 36 6
A6794TFP-9/64IN 3,572 9/64“ 86 134 92 36 6
Lc A6794TFP-5/32IN 3,969 5/32“ 86 134 92 36 6
l2 l5
l1 A6794TFP-4 4 86 134 92 36 6
A6794TFP-4.5 4,5 110 158 118 36 6
A6794TFP-3/16IN 4,763 3/16“ 110 158 118 36 6
A6794TFP-4.8 4,8 110 158 118 36 6
A6794TFP-5 5 110 158 118 36 6
A6794TFP-5.5 5,5 123 170 132 36 6
A6794TFP-7/32IN 5,556 7/32“ 135 182 144 36 6
A6794TFP-5.8 5,8 135 182 144 36 6
A6794TFP-6 6 135 182 144 36 6
A6794TFP-6.1 6,1 151 200 162 36 8
A6794TFP-1/4IN 6,35 1/4“ 151 200 162 36 8
A6794TFP-6.5 6,5 151 200 162 36 8
A6794TFP-6.8 6,8 151 200 162 36 8
A6794TFP-7 7 151 200 162 36 8
A6794TFP-9/32IN 7,144 9/32“ 172 222 184 36 8
A6794TFP-7.4 7,4 172 222 184 36 8
A6794TFP-7.5 7,5 172 222 184 36 8
A6794TFP-5/16IN 7,938 5/16“ 172 222 184 36 8
A6794TFP-8 8 172 222 184 36 8
A6794TFP-8.3 8,3 184 240 198 40 10
A6794TFP-8.5 8,5 184 240 198 40 10
A6794TFP-11/32IN 8,731 11/32“ 184 240 198 40 10
A6794TFP-9 9 184 240 198 40 10
A6794TFP-3/8IN 9,525 3/8“ 205 262 220 40 10
A6794TFP-9.8 9,8 205 262 220 40 10
A6794TFP-10 10 205 262 220 40 10
plication
Primary ap
ation
Other applic
XIII D1 B 418 B 430

Solid drilling
B1
A6785TFP
Alpha® 4 XD20
20×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6785TFP-3 3 60 107 65 36 6
A6785TFP-1/8IN 3,175 1/8“ 86 134 92 36 6
Dc d1
A6785TFP-3.5 3,5 86 134 92 36 6
A6785TFP-9/64IN 3,572 9/64“ 86 134 92 36 6
Lc A6785TFP-5/32IN 3,969 5/32“ 86 134 92 36 6
l2 l5
l1 A6785TFP-4 4 86 134 92 36 6
A6785TFP-4.5 4,5 110 158 118 36 6
A6785TFP-3/16IN 4,763 3/16“ 110 158 118 36 6
A6785TFP-4.8 4,8 110 158 118 36 6
A6785TFP-5 5 110 158 118 36 6
A6785TFP-5.5 5,5 123 170 132 36 6
A6785TFP-7/32IN 5,556 7/32“ 135 182 144 36 6
A6785TFP-5.8 5,8 135 182 144 36 6
A6785TFP-6 6 135 182 144 36 6
A6785TFP-6.1 6,1 151 200 162 36 8
A6785TFP-1/4IN 6,35 1/4“ 151 200 162 36 8
A6785TFP-6.5 6,5 151 200 162 36 8
A6785TFP-6.8 6,8 151 200 162 36 8
A6785TFP-7 7 151 200 162 36 8
A6785TFP-9/32IN 7,144 9/32“ 172 222 184 36 8
A6785TFP-7.4 7,4 172 222 184 36 8
A6785TFP-7.5 7,5 172 222 184 36 8
A6785TFP-5/16IN 7,938 5/16“ 172 222 184 36 8
A6785TFP-8 8 172 222 184 36 8
A6785TFP-8.3 8,3 184 240 198 40 10
A6785TFP-8.5 8,5 184 240 198 40 10
A6785TFP-11/32IN 8,731 11/32“ 184 240 198 40 10
A6785TFP-9 9 184 240 198 40 10
A6785TFP-3/8IN 9,525 3/8“ 205 262 220 40 10
A6785TFP-9.8 9,8 205 262 220 40 10
A6785TFP-10 10 205 262 220 40 10
A6785TFP-10.2 10,2 225 289 242 45 12
A6785TFP-13/32IN 10,319 13/32“ 225 289 242 45 12
A6785TFP-11 11 225 289 242 45 12
A6785TFP-7/16IN 11,113 7/16“ 246 311 264 45 12
A6785TFP-11.5 11,5 246 311 264 45 12
A6785TFP-11.8 11,8 246 311 264 45 12
A6785TFP-15/32IN 11,906 15/32“ 246 311 264 45 12
A6785TFP-12 12 246 311 264 45 12
A6785TFP-1/2IN 12,7 1/2“ 294 357 308 45 14
A6785TFP-13 13 294 357 308 45 14
A6785TFP-14 14 294 357 308 45 14
A6785TFP-9/16IN 14,288 9/16“ 336 404 352 48 16
A6785TFP-15 15 336 404 352 48 16
A6785TFP-16 16 336 404 352 48 16
XIII D1 B 418 B 430

Solid drilling
B1
DC170 Supreme
25×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-25-03.000A1- 3 79 119 84 28 4 b
DC170-25-03.175A1- 3,175 1/8“ 96 148 102 28 4 b
Dc d1
DC170-25-03.500A1- 3,5 108 148 114 28 4 b
DC170-25-03.572A1- 3,572 9/64“ 108 148 114 28 4 b
Lc
l2 l5
DC170-25-03.969A1- 3,969 5/32“ 108 148 114 28 4 b
l1 DC170-25-04.000A1- 4 108 148 114 28 4 b
DC170-25-04.500A1- 4,5 138 177 145 28 5 b
DC170-25-04.763A1- 4,763 3/16“ 137 177 145 28 5 b
DC170-25-04.800A1- 4,8 137 177 145 28 5 b
DC170-25-05.000A1- 5 137 177 145 28 5 b
DC170-25-05.500A1- 5,5 151 200 160 36 6 b
DC170-25-05.556A1- 5,556 7/32“ 165 214 174 36 6 b
DC170-25-06.000A1- 6 165 214 174 36 6 b
DC170-25-06.100A1- 6,1 183 234 194 36 8 b
DC170-25-06.350A1- 6,35 1/4“ 183 234 194 36 8 b
DC170-25-06.500A1- 6,5 183 234 194 36 8 b
DC170-25-06.800A1- 6,8 183 234 194 36 8 b
DC170-25-07.000A1- 7 183 234 194 36 8 b
DC170-25-07.144A1- 7,144 9/32“ 208 260 220 36 8 b
DC170-25-07.938A1- 7,938 5/16“ 208 260 220 36 8 b
DC170-25-08.000A1- 8 208 260 220 36 8 b
DC170-25-08.500A1- 8,5 229 289 243 40 10 b
DC170-25-08.731A1- 8,731 11/32“ 229 289 243 40 10 b
DC170-25-09.000A1- 9 229 289 243 40 10 b
DC170-25-09.525A1- 9,525 3/8“ 255 314 270 40 10 b
DC170-25-09.800A1- 9,8 255 314 270 40 10 b
DC170-25-10.000A1- 10 255 314 270 40 10 b
DC170-25-10.200A1- 10,2 280 346 297 45 12 b
DC170-25-11.000A1- 11 280 346 297 45 12 b
DC170-25-11.113A1- 11,113 7/16“ 306 373 324 45 12 b
DC170-25-11.500A1- 11,5 306 373 324 45 12 b
DC170-25-12.000A1- 12 306 373 324 45 12 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 418 B 430

Solid drilling
B1
with coolant-through
A6889AMP
X·treme DM25
25×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6889AMP-2 2 54 101 57 39 3
A6889AMP-2.1 2,1 56 101 60 37 3
Dc
A6889AMP-2.2 2,2 59 101 63 34 3
d1 A6889AMP-2.3 2,3 62 107 66 37 3
Lc A6889AMP-3/32IN 2,381 3/32“ 62 107 66 35 3
l2 l5
l1
A6889AMP-2.4 2,4 64 107 68 35 3
A6889AMP-2.5 2,5 67 107 71 32 3
A6889AMP-2.6 2,6 70 122 74 44 3
A6889AMP-2.7 2,7 72 122 77 41 3
A6889AMP-7/64IN 2,778 7/64“ 75 122 80 38 3
A6889AMP-2.8 2,8 75 122 80 38 3
A6889AMP-2.9 2,9 78 122 83 36 3
XIII D1 B 420 B 430

Solid drilling
B1
A6885TFP
Alpha® 4 XD25
25×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6885TFP-3 3 79 127 84 36 6
A6885TFP-1/8IN 3,175 1/8“ 108 156 114 36 6
Dc d1
A6885TFP-3.5 3,5 108 156 114 36 6
A6885TFP-9/64IN 3,572 9/64“ 108 156 114 36 6
Lc A6885TFP-5/32IN 3,969 5/32“ 108 156 114 36 6
l2 l5
l1 A6885TFP-4 4 108 156 114 36 6
A6885TFP-4.5 4,5 137 185 145 36 6
A6885TFP-3/16IN 4,763 3/16“ 137 185 145 36 6
A6885TFP-4.8 4,8 137 185 145 36 6
A6885TFP-5 5 137 185 145 36 6
A6885TFP-5.5 5,5 151 200 160 36 6
A6885TFP-7/32IN 5,556 7/32“ 165 214 174 36 6
A6885TFP-5.8 5,8 165 214 174 36 6
A6885TFP-6 6 165 214 174 36 6
A6885TFP-6.1 6,1 183 234 194 36 8
A6885TFP-1/4IN 6,35 1/4“ 183 234 194 36 8
A6885TFP-6.5 6,5 183 234 194 36 8
A6885TFP-6.8 6,8 183 234 194 36 8
A6885TFP-7 7 183 234 194 36 8
A6885TFP-9/32IN 7,144 9/32“ 208 260 220 36 8
A6885TFP-7.4 7,4 208 260 220 36 8
A6885TFP-7.5 7,5 208 260 220 36 8
A6885TFP-5/16IN 7,938 5/16“ 208 260 220 36 8
A6885TFP-8 8 208 260 220 36 8
A6885TFP-8.3 8,3 229 289 243 40 10
A6885TFP-8.5 8,5 229 289 243 40 10
A6885TFP-11/32IN 8,731 11/32“ 229 289 243 40 10
A6885TFP-9 9 229 289 243 40 10
A6885TFP-3/8IN 9,525 3/8“ 255 314 270 40 10
A6885TFP-9.8 9,8 255 314 270 40 10
A6885TFP-10 10 255 314 270 40 10
A6885TFP-10.2 10,2 280 346 297 45 12
A6885TFP-13/32IN 10,319 13/32“ 280 346 297 45 12
A6885TFP-11 11 280 346 297 45 12
A6885TFP-7/16IN 11,113 7/16“ 306 373 324 45 12
A6885TFP-11.5 11,5 306 373 324 45 12
A6885TFP-11.8 11,8 306 373 324 45 12
A6885TFP-15/32IN 11,906 15/32“ 306 373 324 45 12
A6885TFP-12 12 306 373 324 45 12
plication
Primary ap
ation
Other applic
XIII D1 B 420 B 430

Solid drilling
B1
DC170 Supreme
30×Dc
140°
P M K N S H O
WJ30EJ CC CC C
WJ30EJ
Dc Dc d1
Shank DIN 6535 HA DC170-30-03.000A1- 3 92 132 97 28 4 b
DC170-30-03.175A1- 3,175 1/8“ 114 166 120 28 4 b
Dc d1
DC170-30-03.500A1- 3,5 127 166 133 28 4 b
DC170-30-03.969A1- 3,969 5/32“ 127 166 133 28 4 b
Lc
l2 l5
DC170-30-04.000A1- 4 127 166 133 28 4 b
l1 DC170-30-04.500A1- 4,5 162 200 169 28 5 b
DC170-30-04.763A1- 4,763 3/16“ 161 200 169 28 5 b
DC170-30-04.800A1- 4,8 161 200 169 28 5 b
DC170-30-05.000A1- 5 161 200 169 28 5 b
DC170-30-05.500A1- 5,5 178 225 187 36 6 b
DC170-30-05.556A1- 5,556 7/32“ 195 242 204 36 6 b
DC170-30-06.000A1- 6 195 242 204 36 6 b
DC170-30-06.350A1- 6,35 1/4“ 217 268 228 36 8 b
DC170-30-06.500A1- 6,5 217 268 228 36 8 b
DC170-30-06.800A1- 6,8 217 268 228 36 8 b
DC170-30-07.000A1- 7 217 268 228 36 8 b
DC170-30-07.400A1- 7,4 244 294 256 36 8 b
DC170-30-07.938A1- 7,938 5/16“ 244 294 256 36 8 b
DC170-30-08.000A1- 8 244 294 256 36 8 b
DC170-30-08.500A1- 8,5 273 330 287 40 10 b
DC170-30-08.731A1- 8,731 11/32“ 273 330 287 40 10 b
DC170-30-09.000A1- 9 273 330 287 40 10 b
DC170-30-09.525A1- 9,525 3/8“ 305 364 320 40 10 b
DC170-30-10.000A1- 10 305 364 320 40 10 b
DC170-30-10.200A1- 10,2 335 401 352 45 12 b
DC170-30-11.000A1- 11 335 401 352 45 12 b
DC170-30-11.113A1- 11,113 7/16“ 364 430 382 45 12 b
DC170-30-12.000A1- 12 364 430 382 45 12 b
XIII D1 B 420 B 430

Solid drilling
B1
Solid carbide drills
with coolant-through – micro
A6989AMP
X·treme DM30
30×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6989AMP-2 2 64 112 67 40 3
A6989AMP-2.1 2,1 66 112 70 38 3
Dc
A6989AMP-2.2 2,2 70 112 74 34 3
d1 A6989AMP-2.3 2,3 73 122 77 41 3
Lc A6989AMP-3/32IN 2,381 3/32“ 76 122 80 38 3
l2 l5
l1
A6989AMP-2.4 2,4 76 122 80 38 3
A6989AMP-2.5 2,5 80 122 84 34 3
A6989AMP-2.6 2,6 83 136 87 45 3
A6989AMP-2.7 2,7 85 136 90 42 3
A6989AMP-7/64IN 2,778 7/64“ 89 136 94 38 3
A6989AMP-2.8 2,8 89 136 94 38 3
A6989AMP-2.9 2,9 92 136 97 36 3
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 420 B 430

Solid drilling
B1
A6994TFP
X·treme DH30
30×Dc
140°
P M K N S H O
TFP CC C C C C C
Dc d1
Shank DIN 6535 HA A6994TFP-3 3 92 140 97 36 6
A6994TFP-1/8IN 3,175 1/8“ 127 174 133 36 6
Dc d1
A6994TFP-3.5 3,5 127 174 133 36 6
A6994TFP-9/64IN 3,572 9/64“ 127 174 133 36 6
Lc A6994TFP-5/32IN 3,969 5/32“ 127 174 133 36 6
l2 l5
l1 A6994TFP-4 4 127 174 133 36 6
A6994TFP-4.5 4,5 161 208 169 36 6
A6994TFP-3/16IN 4,763 3/16“ 161 208 169 36 6
A6994TFP-4.8 4,8 161 208 169 36 6
A6994TFP-5 5 161 208 169 36 6
A6994TFP-5.5 5,5 178 225 187 36 6
A6994TFP-7/32IN 5,556 7/32“ 195 242 204 36 6
A6994TFP-5.8 5,8 195 242 204 36 6
A6994TFP-6 6 195 242 204 36 6
A6994TFP-6.1 6,1 217 268 228 36 8
A6994TFP-1/4IN 6,35 1/4“ 217 268 228 36 8
A6994TFP-6.5 6,5 217 268 228 36 8
A6994TFP-6.8 6,8 217 268 228 36 8
A6994TFP-7 7 217 268 228 36 8
A6994TFP-9/32IN 7,144 9/32“ 244 294 256 36 8
A6994TFP-7.4 7,4 244 294 256 36 8
A6994TFP-7.5 7,5 244 294 256 36 8
A6994TFP-5/16IN 7,938 5/16“ 244 294 256 36 8
A6994TFP-8 8 244 294 256 36 8
A6994TFP-8.3 8,3 273 330 287 40 10
A6994TFP-8.5 8,5 273 330 287 40 10
A6994TFP-11/32IN 8,731 11/32“ 273 330 287 40 10
A6994TFP-9 9 273 330 287 40 10
A6994TFP-3/8IN 9,525 3/8“ 305 364 320 40 10
A6994TFP-9.8 9,8 305 364 320 40 10
A6994TFP-10 10 305 364 320 40 10
XIII D1 B 420 B 430

Solid drilling
B1
A6985TFP
Alpha® 4 XD30
30×Dc
140°
P M K N S H O
Dc d1
Shank DIN 6535 HA A6985TFP-3 3 92 140 97 36 6
A6985TFP-1/8IN 3,175 1/8“ 127 174 133 36 6
Dc d1
A6985TFP-3.5 3,5 127 174 133 36 6
A6985TFP-9/64IN 3,572 9/64“ 127 174 133 36 6
Lc A6985TFP-5/32IN 3,969 5/32“ 127 174 133 36 6
l2 l5
l1 A6985TFP-4 4 127 174 133 36 6
A6985TFP-4.5 4,5 161 208 169 36 6
A6985TFP-3/16IN 4,763 3/16“ 161 208 169 36 6
A6985TFP-4.8 4,8 161 208 169 36 6
A6985TFP-5 5 161 208 169 36 6
A6985TFP-5.5 5,5 178 225 187 36 6
A6985TFP-7/32IN 5,556 7/32“ 195 242 204 36 6
A6985TFP-5.8 5,8 195 242 204 36 6
A6985TFP-6 6 195 242 204 36 6
A6985TFP-6.1 6,1 217 268 228 36 8
A6985TFP-1/4IN 6,35 1/4“ 217 268 228 36 8
A6985TFP-6.5 6,5 217 268 228 36 8
A6985TFP-6.8 6,8 217 268 228 36 8
A6985TFP-7 7 217 268 228 36 8
A6985TFP-9/32IN 7,144 9/32“ 244 294 256 36 8
A6985TFP-7.4 7,4 244 294 256 36 8
A6985TFP-7.5 7,5 244 294 256 36 8
A6985TFP-5/16IN 7,938 5/16“ 244 294 256 36 8
A6985TFP-8 8 244 294 256 36 8
A6985TFP-8.3 8,3 273 330 287 40 10
A6985TFP-8.5 8,5 273 330 287 40 10
A6985TFP-11/32IN 8,731 11/32“ 273 330 287 40 10
A6985TFP-9 9 273 330 287 40 10
A6985TFP-3/8IN 9,525 3/8“ 305 364 320 40 10
A6985TFP-9.8 9,8 305 364 320 40 10
A6985TFP-10 10 305 364 320 40 10
A6985TFP-10.2 10,2 335 401 352 45 12
A6985TFP-13/32IN 10,319 13/32“ 335 401 352 45 12
A6985TFP-11 11 335 401 352 45 12
A6985TFP-7/16IN 11,113 7/16“ 364 430 382 45 12
A6985TFP-11.5 11,5 364 430 382 45 12
A6985TFP-11.8 11,8 364 430 382 45 12
A6985TFP-15/32IN 11,906 15/32“ 364 430 382 45 12
A6985TFP-12 12 364 430 382 45 12
plication
Primary ap
ation
Other applic
XIII D1 B 420 B 430

Solid drilling
B1
A7495TTP
X·treme D40
40×Dc
130°
P M K N S H O
TTP CC C CC CC
Dc d1
Designation e7 Dc Lc l1 l2 l5 h6
Shank DIN 6535 HA A7495TTP-3 3 134 172 139 28 4
A7495TTP-1/8IN 3,175 1/8“ 134 172 139 28 4
Dc d1
A7495TTP-3.5 3,5 150 188 156 28 4
A7495TTP-9/64IN 3,572 9/64“ 150 188 156 28 4
Lc A7495TTP-5/32IN 3,969 5/32“ 168 206 174 28 4
l2 l5
l1 A7495TTP-4 4 168 206 174 28 4
A7495TTP-4.5 4,5 188 228 195 28 5
A7495TTP-4.8 4,8 209 249 217 28 5
A7495TTP-5 5 209 249 217 28 5
A7495TTP-7/32IN 5,556 7/32“ 248 297 257 36 6
A7495TTP-5.8 5,8 248 297 257 36 6
A7495TTP-6 6 248 297 257 36 6
A7495TTP-6.1 6,1 272 324 282 36 8
A7495TTP-1/4IN 6,35 1/4“ 272 324 282 36 8
A7495TTP-6.5 6,5 272 324 282 36 8
A7495TTP-6.8 6,8 287 339 298 36 8
A7495TTP-7 7 287 339 298 36 8
A7495TTP-9/32IN 7,144 9/32“ 313 366 325 36 8
A7495TTP-7.4 7,4 313 366 325 36 8
A7495TTP-7.5 7,5 313 366 325 36 8
A7495TTP-5/16IN 7,938 5/16“ 330 382 342 36 8
A7495TTP-8 8 330 382 342 36 8
A7495TTP-8.5 8,5 356 415 369 40 10
A7495TTP-9 9 371 430 385 40 10
A7495TTP-9.8 9,8 418 477 433 40 10
A7495TTP-10 10 418 477 433 40 10
A7495TTP-10.2 10,2 460 528 477 45 12
A7495TTP-13/32IN 10,319 13/32“ 460 528 477 45 12
A7495TTP-11 11 460 528 477 45 12
XIII D1 B 420 B 430

Solid drilling
B1
A7595TTP
X·treme D50
50×Dc
130°
P M K N S H O
TTP CC C CC CC
Dc d1
Designation e7 Dc Lc l1 l2 l5 h6
Shank DIN 6535 HA A7595TTP-3 3 166 204 171 28 4
A7595TTP-1/8IN 3,175 1/8“ 166 204 171 28 4
Dc d1
A7595TTP-3.5 3,5 186 224 192 28 4
A7595TTP-9/64IN 3,572 9/64“ 186 224 192 28 4
Lc A7595TTP-5/32IN 3,969 5/32“ 208 246 214 28 4
l2 l5
l1 A7595TTP-4 4 208 246 214 28 4
A7595TTP-4.5 4,5 233 273 240 28 5
A7595TTP-4.8 4,8 259 299 267 28 5
A7595TTP-5 5 259 299 267 28 5
A7595TTP-7/32IN 5,556 7/32“ 308 357 317 36 6
A7595TTP-5.8 5,8 308 357 317 36 6
A7595TTP-6 6 308 357 317 36 6
A7595TTP-6.1 6,1 337 389 347 36 8
A7595TTP-1/4IN 6,35 1/4“ 337 389 347 36 8
A7595TTP-6.5 6,5 337 389 347 36 8
A7595TTP-6.8 6,8 357 409 368 36 8
A7595TTP-7 7 357 409 368 36 8
A7595TTP-9/32IN 7,144 9/32“ 388 441 400 36 8
A7595TTP-7.4 7,4 388 441 400 36 8
A7595TTP-7.5 7,5 388 441 400 36 8
A7595TTP-5/16IN 7,938 5/16“ 410 462 422 36 8
A7595TTP-8 8 410 462 422 36 8
A7595TTP-8.3 8,3 441 500 454 40 10
A7595TTP-8.5 8,5 441 500 454 40 10
A7595TTP-11/32IN 8,731 11/32“ 466 525 480 40 10
A7595TTP-9 9 466 525 480 40 10
plication
Primary ap
ation
Other applic
XIII D1 B 420 B 430

Solid drilling
B1
Solid carbide chamfer pilot drills with coolant-through
K3281TFT
X·treme Pilot Step 90
– Special diameter tolerance for XD Technology 2×Dc

150° 90°
P M K N S H O
TFT CC CC CC CC CC C C
Dc Dc d1
Designation p7 inches/ d10 Lc l1 l2 l5 h6
TFT mm no. mm mm mm mm mm mm
Shank DIN 6535 HA K3281TFT-3 3 6 6 66 20 36 6
K3281TFT-4 4 6 10 66 22 36 6
Dc d10
90° K3281TFT-4.5 4,5 6 10 66 22 36 6
d1 K3281TFT-5 5 8 12 79 28 36 8
K3281TFT-5.5 5,5 8 12 79 28 36 8
Lc
l2 l5 K3281TFT-6 6 8 12 79 28 36 8
l1 K3281TFT-6.1 6,1 10 14 89 34 40 10
K3281TFT-1/4IN 6,35 1/4“ 10 14 89 34 40 10
K3281TFT-7 7 10 14 89 34 40 10
K3281TFT-7.4 7,4 12 16 102 40 45 12
K3281TFT-8 8 12 16 102 40 45 12
K3281TFT-8.5 8,5 12 20 102 44 45 12
K3281TFT-9 9 12 20 102 44 45 12
K3281TFT-9.8 9,8 12 20 102 44 45 12
K3281TFT-10 10 12 20 102 44 45 12
K3281TFT-11 11 14 24 107 52 45 14
K3281TFT-12 12 14 24 107 52 45 14
K3281TFT-13 13 16 28 115 58 48 16
K3281TFT-14 14 16 28 115 58 48 16
K3281TFT-16 16 18 32 123 66 48 18
D1 B 420 B 430

Solid drilling
B1
Solid carbide micro pilot drills
A6181AML
X·treme Pilot 150
– Special diameter tolerance for micro XD Technology 2×Dc

150°
P M K N S H O
AML CC CC CC CC CC C C
Dc d1
Designation p7 Dc Lc l1 l2 l5 h6
AML mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6181AML-2 2 7 57 10 42 3
A6181AML-2.05 2,05 7 57 11 42 3
Dc
A6181AML-2.1 2,1 7 57 11 42 3
d1 A6181AML-2.15 2,15 7 57 11 42 3
Lc A6181AML-2.2 2,2 7 57 11 42 3
l2 l5
l1
A6181AML-2.25 2,25 8 57 12 43 3
A6181AML-2.3 2,3 8 59 12 43 3
A6181AML-2.35 2,35 8 59 12 43 3
A6181AML-3/32IN 2,381 3/32“ 8 59 12 43 3
A6181AML-2.4 2,4 8 59 12 43 3
A6181AML-2.45 2,45 9 59 13 42 3
A6181AML-2.5 2,5 9 59 13 45 3
A6181AML-2.55 2,55 9 62 13 45 3
A6181AML-2.6 2,6 9 62 13 45 3
A6181AML-2.65 2,65 9 62 14 45 3
A6181AML-2.7 2,7 9 62 14 45 3
A6181AML-2.75 2,75 9 62 14 45 3
A6181AML-7/64IN 2,778 7/64“ 9 62 14 45 3
A6181AML-2.8 2,8 9 62 14 45 3
A6181AML-2.85 2,85 10 62 15 44 3
A6181AML-2.9 2,9 10 62 15 44 3
A6181AML-2.95 2,95 10 62 15 44 3
plication
Primary ap
ation
Other applic
D1 B 422 B 430

Solid drilling
B1
Solid carbide pilot drills with coolant-through
A6181TFT
XD Pilot

150°
P M K N S H O
Dc d1
TFT mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A6181TFT-3 3 14 66 20 36 6
A6181TFT-1/8IN 3,175 1/8“ 14 66 20 36 6
Dc d1
A6181TFT-3.5 3,5 14 66 20 36 6
A6181TFT-9/64IN 3,572 9/64“ 14 66 20 36 6
Lc A6181TFT-5/32IN 3,969 5/32“ 16 74 24 36 6
l2 l5
l1 A6181TFT-4 4 16 74 24 36 6
A6181TFT-4.5 4,5 16 74 24 36 6
A6181TFT-3/16IN 4,763 3/16“ 19 82 28 36 6
A6181TFT-4.8 4,8 19 82 28 36 6
A6181TFT-5 5 19 82 28 36 6
A6181TFT-5.5 5,5 19 82 28 36 6
A6181TFT-7/32IN 5,556 7/32“ 19 82 28 36 6
A6181TFT-5.8 5,8 19 82 28 36 6
A6181TFT-6 6 19 82 28 36 6
A6181TFT-6.1 6,1 23 91 34 36 8
A6181TFT-1/4IN 6,35 1/4“ 23 91 34 36 8
A6181TFT-6.5 6,5 23 91 34 36 8
A6181TFT-6.8 6,8 23 91 34 36 8
A6181TFT-7 7 23 91 34 36 8
A6181TFT-9/32IN 7,144 9/32“ 29 91 41 36 8
A6181TFT-7.4 7,4 29 91 41 36 8
A6181TFT-7.5 7,5 29 91 41 36 8
A6181TFT-5/16IN 7,938 5/16“ 29 91 41 36 8
A6181TFT-8 8 29 91 41 36 8
A6181TFT-8.3 8,3 32 103 47 40 10
A6181TFT-8.5 8,5 32 103 47 40 10
A6181TFT-11/32IN 8,731 11/32“ 32 103 47 40 10
A6181TFT-9 9 32 103 47 40 10
A6181TFT-3/8IN 9,525 3/8“ 32 103 47 40 10
A6181TFT-9.8 9,8 32 103 47 40 10
A6181TFT-10 10 32 103 47 40 10
A6181TFT-10.2 10,2 37 118 55 45 12
A6181TFT-13/32IN 10,319 13/32“ 37 118 55 45 12
A6181TFT-11 11 37 118 55 45 12
A6181TFT-7/16IN 11,113 7/16“ 37 118 55 45 12
A6181TFT-11.5 11,5 37 118 55 45 12
A6181TFT-11.8 11,8 37 118 55 45 12
A6181TFT-15/32IN 11,906 15/32“ 37 118 55 45 12
A6181TFT-12 12 37 118 55 45 12
A6181TFT-1/2IN 12,7 1/2“ 46 124 60 45 14
A6181TFT-13 13 46 124 60 45 14
A6181TFT-14 14 46 124 60 45 14
A6181TFT-9/16IN 14,288 9/16“ 49 133 65 48 16
A6181TFT-15 15 49 133 65 48 16
A6181TFT-16 16 49 133 65 48 16
XIII D1 B 422 B 430

Solid drilling
B1
A7191TFT
X·treme Pilot 180

180°
P M K N S H O
Dc d1
Shank DIN 6535 HA A7191TFT-3 3 7 62 12 42 6
A7191TFT-1/8IN 3,175 1/8“ 7 62 12 42 6
Dc d1
A7191TFT-3.5 3,5 7 62 13 42 6
A7191TFT-9/64IN 3,572 9/64“ 7 62 13 42 6
Lc
A7191TFT-5/32IN 3,969 5/32“ 8 66 14 42 6
l2 l5
l1 A7191TFT-4 4 8 66 14 42 6
A7191TFT-4.5 4,5 9 66 16 42 6
A7191TFT-3/16IN 4,763 3/16“ 10 66 18 42 6
A7191TFT-4.8 4,8 10 66 18 42 6
A7191TFT-5 5 10 66 18 42 6
A7191TFT-5.5 5,5 11 66 20 42 6
A7191TFT-7/32IN 5,556 7/32“ 12 66 21 42 6
A7191TFT-5.8 5,8 12 66 21 42 6
A7191TFT-6 6 12 66 21 42 6
A7191TFT-6.1 6,1 13 79 23 47 8
A7191TFT-1/4IN 6,35 1/4“ 13 79 23 47 8
A7191TFT-6.5 6,5 13 79 23 47 8
A7191TFT-6.8 6,8 14 79 25 47 8
A7191TFT-7 7 14 79 25 47 8
A7191TFT-9/32IN 7,144 9/32“ 16 79 28 47 8
A7191TFT-7.4 7,4 16 79 28 47 8
A7191TFT-7.5 7,5 16 79 28 47 8
A7191TFT-5/16IN 7,938 5/16“ 16 79 28 47 8
A7191TFT-8 8 16 79 28 47 8
A7191TFT-8.3 8,3 18 89 32 50 10
A7191TFT-8.5 8,5 18 89 32 50 10
A7191TFT-11/32IN 8,731 11/32“ 18 89 32 50 10
A7191TFT-9 9 18 89 32 50 10
A7191TFT-3/8IN 9,525 3/8“ 20 89 35 50 10
A7191TFT-9.8 9,8 20 89 35 50 10
A7191TFT-10 10 20 89 35 50 10
A7191TFT-10.2 10,2 23 102 40 52 12
A7191TFT-13/32IN 10,319 13/32“ 23 102 40 52 12
A7191TFT-10.5 10,5 23 102 40 52 12
A7191TFT-11 11 23 102 40 52 12
A7191TFT-7/16IN 11,113 7/16“ 25 102 43 52 12
A7191TFT-11.5 11,5 25 102 43 52 12
A7191TFT-11.8 11,8 25 102 43 52 12
A7191TFT-15/32IN 11,906 15/32“ 25 102 43 52 12
A7191TFT-12 12 25 102 43 52 12
A7191TFT-12.5 12,5 35 107 49 52 14
A7191TFT-1/2IN 12,7 1/2“ 35 107 49 52 14
A7191TFT-13 13 35 107 49 52 14
A7191TFT-13.5 13,5 35 107 49 52 14
A7191TFT-14 14 35 107 49 52 14
A7191TFT-9/16IN 14,288 9/16“ 40 115 56 53 16
A7191TFT-14.5 14,5 40 115 56 53 16
A7191TFT-15 15 40 115 56 53 16
Continued
XIII D1 B 422 B 430

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A7191TFT-16 16 40 115 56 53 16
A7191TFT-17 17 45 123 63 53 18
d1
A7191TFT-18 18 45 123 63 53 18
Dc
A7191TFT-19 19 50 131 70 55 20
Lc
A7191TFT-20 20 50 131 70 55 20
l2 l5
l1
XIII D1 B 422 B 430

Solid drilling
B1
K5191TFT
X·treme Pilot 180 C
– For inclined and round surfaces (e.g. crankshafts)

– Conical contour 1:30 – for step-free piloting 2×Dc
180° 1:30
P M K N S H O
Dc d1
Designation h10 d3 Lc l1 l2 l5 l15 h6
TFT mm mm mm mm mm mm mm mm
Shank DIN 6535 HA K5191TFT-4 4 3,9 10 59 16 36 3 6
K5191TFT-5 5 4,9 11 63 19 36 3 6
Dc K5191TFT-6 6 5,85 13 68 22 36 4,5 8
K5191TFT-7 7 6,85 15 73 26 36 4,5 8
d3 d1
l15
Lc
l2 l5
l1
plication
Primary ap
ation
Other applic
D1 B 422 B 430

Solid drilling
B1
Solid carbide chamfer drills
K3879XPL
X·treme Step 90
– Step length in accordance with DIN 8378

– For thread core hole drilling 3×Dc
140° 90°
P M K N S H O
XPL CC C CC C C C C
Dc d10 d1
Designation m7 h8 Lc l1 l2 l5 h6
XPL For thread mm mm mm mm mm mm mm
Shank DIN 6535 HE K3879XPL-M4 M4 3,3 5 11 66 28 36 6
K3879XPL-M5 M5 4,2 6 14 66 28 36 6
Dc d10
90° K3879XPL-M6 M6 5 8 17 79 41 36 8
d1 K3879XPL-M8 M8 6,8 10 21 89 47 40 10
K3879XPL-M8X1 M8x1 7 10 21 89 47 40 10
Lc
l2 l5 K3879XPL-M10 M 10 8,5 12 26 102 55 45 12
l1 K3879XPL-M10X1 M 10 x 1 9 12 26 102 55 45 12
K3879XPL-M12 M 12 10,2 14 30 107 60 45 14
K3879XPL-M12X1.5 M 12 x 1,5 10,5 14 30 107 60 45 14
K3879XPL-M14 M 14 12 16 35 115 65 48 16
K3879XPL-M14X1.5 M 14 x 1,5 12,5 16 35 115 65 48 16
K3879XPL-M16 M 16 14 18 39 123 73 48 18
K3879XPL-M16X1.5 M 16 x 1,5 14,5 18 39 123 73 48 18
XIII D1 B 424 B 123

Solid drilling
B1
A3279XPL / A3879XPL
X·treme
DIN
3×Dc 6537 K
140°
P M K N S H O
XPL CC C CC C C C C
Dc d1
Shank DIN 6535 HA A3279XPL-3 3 14 62 20 36 6
A3279XPL-3.1 3,1 14 62 20 36 6
d1 A3279XPL-1/8IN 3,175 1/8“ 14 62 20 36 6
Dc
A3279XPL-3.2 3,2 14 62 20 36 6
Lc A3279XPL-3.25 3,25 14 62 20 36 6
l2 l5
l1 A3279XPL-3.3 3,3 14 62 20 36 6
A3279XPL-3.4 3,4 14 62 20 36 6
A3279XPL-3.5 3,5 14 62 20 36 6
A3279XPL-9/64IN 3,572 9/64“ 14 62 20 36 6
A3279XPL-3.6 3,6 14 62 20 36 6
A3279XPL-3.65 3,65 14 62 20 36 6
A3279XPL-3.7 3,7 14 62 20 36 6
A3279XPL-3.8 3,8 17 66 24 36 6
A3279XPL-3.9 3,9 17 66 24 36 6
A3279XPL-5/32IN 3,969 5/32“ 17 66 24 36 6
A3279XPL-4 4 17 66 24 36 6
A3279XPL-4.1 4,1 17 66 24 36 6
A3279XPL-4.2 4,2 17 66 24 36 6
A3279XPL-4.3 4,3 17 66 24 36 6
A3279XPL-11/64IN 4,366 11/64“ 17 66 24 36 6
A3279XPL-4.4 4,4 17 66 24 36 6
A3279XPL-4.5 4,5 17 66 24 36 6
A3279XPL-4.6 4,6 17 66 24 36 6
A3279XPL-4.65 4,65 17 66 24 36 6
A3279XPL-4.7 4,7 17 66 24 36 6
A3279XPL-3/16IN 4,763 3/16“ 20 66 28 36 6
A3279XPL-4.8 4,8 20 66 28 36 6
A3279XPL-4.9 4,9 20 66 28 36 6
A3279XPL-5 5 20 66 28 36 6
A3279XPL-5.1 5,1 20 66 28 36 6
A3279XPL-13/64IN 5,159 13/64“ 20 66 28 36 6
A3279XPL-5.2 5,2 20 66 28 36 6
A3279XPL-5.3 5,3 20 66 28 36 6
A3279XPL-5.4 5,4 20 66 28 36 6
A3279XPL-5.5 5,5 20 66 28 36 6
A3279XPL-5.55 5,55 20 66 28 36 6
A3279XPL-7/32IN 5,556 7/32“ 20 66 28 36 6
A3279XPL-5.6 5,6 20 66 28 36 6
A3279XPL-5.7 5,7 20 66 28 36 6
A3279XPL-5.8 5,8 20 66 28 36 6
A3279XPL-5.9 5,9 20 66 28 36 6
A3279XPL-15/64IN 5,953 15/64“ 20 66 28 36 6
A3279XPL-6 6 20 66 28 36 6
A3279XPL-6.1 6,1 24 79 34 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3279XPL-6.2 6,2 24 79 34 36 8
A3279XPL-6.3 6,3 24 79 34 36 8
d1 A3279XPL-1/4IN 6,35 1/4“ 24 79 34 36 8
Dc
A3279XPL-6.4 6,4 24 79 34 36 8
Lc A3279XPL-6.5 6,5 24 79 34 36 8
l2 l5
l1 A3279XPL-6.6 6,6 24 79 34 36 8
A3279XPL-6.7 6,7 24 79 34 36 8
A3279XPL-17/64IN 6,747 17/64“ 24 79 34 36 8
A3279XPL-6.8 6,8 24 79 34 36 8
A3279XPL-6.9 6,9 24 79 34 36 8
A3279XPL-7 7 24 79 34 36 8
A3279XPL-7.1 7,1 29 79 41 36 8
A3279XPL-9/32IN 7,144 9/32“ 29 79 41 36 8
A3279XPL-7.2 7,2 29 79 41 36 8
A3279XPL-7.3 7,3 29 79 41 36 8
A3279XPL-7.4 7,4 29 79 41 36 8
A3279XPL-7.5 7,5 29 79 41 36 8
A3279XPL-19/64IN 7,541 19/64“ 29 79 41 36 8
A3279XPL-7.55 7,55 29 79 41 36 8
A3279XPL-7.6 7,6 29 79 41 36 8
A3279XPL-7.7 7,7 29 79 41 36 8
A3279XPL-7.8 7,8 29 79 41 36 8
A3279XPL-7.9 7,9 29 79 41 36 8
A3279XPL-5/16IN 7,938 5/16“ 29 79 41 36 8
A3279XPL-8 8 29 79 41 36 8
A3279XPL-8.1 8,1 35 89 47 40 10
A3279XPL-8.2 8,2 35 89 47 40 10
A3279XPL-8.3 8,3 35 89 47 40 10
A3279XPL-21/64IN 8,334 21/64“ 35 89 47 40 10
A3279XPL-8.4 8,4 35 89 47 40 10
A3279XPL-8.5 8,5 35 89 47 40 10
A3279XPL-8.6 8,6 35 89 47 40 10
A3279XPL-8.7 8,7 35 89 47 40 10
A3279XPL-11/32IN 8,731 11/32“ 35 89 47 40 10
A3279XPL-8.8 8,8 35 89 47 40 10
A3279XPL-8.9 8,9 35 89 47 40 10
A3279XPL-9 9 35 89 47 40 10
A3279XPL-9.1 9,1 35 89 47 40 10
A3279XPL-23/64IN 9,128 23/64“ 35 89 47 40 10
A3279XPL-9.2 9,2 35 89 47 40 10
A3279XPL-9.3 9,3 35 89 47 40 10
A3279XPL-9.4 9,4 35 89 47 40 10
A3279XPL-9.5 9,5 35 89 47 40 10
A3279XPL-3/8IN 9,525 3/8“ 35 89 47 40 10
A3279XPL-9.6 9,6 35 89 47 40 10
A3279XPL-9.7 9,7 35 89 47 40 10
A3279XPL-9.8 9,8 35 89 47 40 10
A3279XPL-9.9 9,9 35 89 47 40 10
A3279XPL-25/64IN 9,922 25/64“ 35 89 47 40 10
A3279XPL-10 10 35 89 47 40 10
A3279XPL-10.1 10,1 40 102 55 45 12
A3279XPL-10.2 10,2 40 102 55 45 12
A3279XPL-10.3 10,3 40 102 55 45 12
A3279XPL-13/32IN 10,319 13/32“ 40 102 55 45 12
A3279XPL-10.4 10,4 40 102 55 45 12
A3279XPL-10.5 10,5 40 102 55 45 12
A3279XPL-10.6 10,6 40 102 55 45 12
A3279XPL-27/64IN 10,716 27/64“ 40 102 55 45 12
A3279XPL-10.8 10,8 40 102 55 45 12
A3279XPL-10.9 10,9 40 102 55 45 12
A3279XPL-11 11 40 102 55 45 12
A3279XPL-11.1 11,1 40 102 55 45 12
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3279XPL-7/16IN 11,113 7/16“ 40 102 55 45 12
A3279XPL-11.2 11,2 40 102 55 45 12
d1 A3279XPL-11.3 11,3 40 102 55 45 12
Dc
A3279XPL-11.4 11,4 40 102 55 45 12
Lc A3279XPL-11.5 11,5 40 102 55 45 12
l2 l5
l1 A3279XPL-29/64IN 11,509 29/64“ 40 102 55 45 12
A3279XPL-11.55 11,55 40 102 55 45 12
A3279XPL-11.7 11,7 40 102 55 45 12
A3279XPL-11.8 11,8 40 102 55 45 12
A3279XPL-15/32IN 11,906 15/32“ 40 102 55 45 12
A3279XPL-12 12 40 102 55 45 12
A3279XPL-12.1 12,1 43 107 60 45 14
A3279XPL-12.2 12,2 43 107 60 45 14
A3279XPL-12.25 12,25 43 107 60 45 14
A3279XPL-12.3 12,3 43 107 60 45 14
A3279XPL-31/64IN 12,303 31/64“ 43 107 60 45 14
A3279XPL-12.4 12,4 43 107 60 45 14
A3279XPL-12.5 12,5 43 107 60 45 14
A3279XPL-12.6 12,6 43 107 60 45 14
A3279XPL-1/2IN 12,7 1/2“ 43 107 60 45 14
A3279XPL-12.8 12,8 43 107 60 45 14
A3279XPL-12.9 12,9 43 107 60 45 14
A3279XPL-13 13 43 107 60 45 14
A3279XPL-13.1 13,1 43 107 60 45 14
A3279XPL-13.2 13,2 43 107 60 45 14
A3279XPL-13.3 13,3 43 107 60 45 14
A3279XPL-13.4 13,4 43 107 60 45 14
A3279XPL-17/32IN 13,494 17/32“ 43 107 60 45 14
A3279XPL-13.5 13,5 43 107 60 45 14
A3279XPL-13.6 13,6 43 107 60 45 14
A3279XPL-13.7 13,7 43 107 60 45 14
A3279XPL-13.8 13,8 43 107 60 45 14
A3279XPL-13.9 13,9 43 107 60 45 14
A3279XPL-14 14 43 107 60 45 14
A3279XPL-14.2 14,2 45 115 65 48 16
A3279XPL-9/16IN 14,288 9/16“ 45 115 65 48 16
A3279XPL-14.4 14,4 45 115 65 48 16
A3279XPL-14.5 14,5 45 115 65 48 16
A3279XPL-14.6 14,6 45 115 65 48 16
A3279XPL-14.7 14,7 45 115 65 48 16
A3279XPL-14.75 14,75 45 115 65 48 16
A3279XPL-14.8 14,8 45 115 65 48 16
A3279XPL-15 15 45 115 65 48 16
A3279XPL-15.1 15,1 45 115 65 48 16
A3279XPL-15.2 15,2 45 115 65 48 16
A3279XPL-15.3 15,3 45 115 65 48 16
A3279XPL-15.5 15,5 45 115 65 48 16
A3279XPL-15.6 15,6 45 115 65 48 16
A3279XPL-15.7 15,7 45 115 65 48 16
A3279XPL-15.8 15,8 45 115 65 48 16
A3279XPL-5/8IN 15,875 5/8“ 45 115 65 48 16
A3279XPL-15.9 15,9 45 115 65 48 16
A3279XPL-16 16 45 115 65 48 16
A3279XPL-16.1 16,1 51 123 73 48 18
A3279XPL-16.2 16,2 51 123 73 48 18
A3279XPL-16.3 16,3 51 123 73 48 18
A3279XPL-16.4 16,4 51 123 73 48 18
A3279XPL-16.5 16,5 51 123 73 48 18
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3279XPL-16.6 16,6 51 123 73 48 18
A3279XPL-16.7 16,7 51 123 73 48 18
d1 A3279XPL-16.75 16,75 51 123 73 48 18
Dc
A3279XPL-16.8 16,8 51 123 73 48 18
Lc A3279XPL-17 17 51 123 73 48 18
l2 l5
l1 A3279XPL-17.2 17,2 51 123 73 48 18
A3279XPL-17.3 17,3 51 123 73 48 18
A3279XPL-17.5 17,5 51 123 73 48 18
A3279XPL-17.6 17,6 51 123 73 48 18
A3279XPL-17.7 17,7 51 123 73 48 18
A3279XPL-17.8 17,8 51 123 73 48 18
A3279XPL-18 18 51 123 73 48 18
A3279XPL-18.2 18,2 55 131 79 50 20
A3279XPL-18.7 18,7 55 131 79 50 20
A3279XPL-18.8 18,8 55 131 79 50 20
A3279XPL-19 19 55 131 79 50 20
A3279XPL-3/4IN 19,05 3/4“ 55 131 79 50 20
A3279XPL-19.5 19,5 55 131 79 50 20
A3279XPL-19.7 19,7 55 131 79 50 20
A3279XPL-19.8 19,8 55 131 79 50 20
A3279XPL-20 20 55 131 79 50 20
Shank DIN 6535 HE A3879XPL-3 3 14 62 20 36 6
A3879XPL-3.1 3,1 14 62 20 36 6
Dc d1 A3879XPL-3.2 3,2 14 62 20 36 6
A3879XPL-3.25 3,25 14 62 20 36 6
Lc A3879XPL-3.3 3,3 14 62 20 36 6
l2 l5
l1 A3879XPL-3.4 3,4 14 62 20 36 6
A3879XPL-3.5 3,5 14 62 20 36 6
A3879XPL-3.6 3,6 14 62 20 36 6
A3879XPL-3.65 3,65 14 62 20 36 6
A3879XPL-3.7 3,7 14 62 20 36 6
A3879XPL-3.8 3,8 17 66 24 36 6
A3879XPL-3.9 3,9 17 66 24 36 6
A3879XPL-4 4 17 66 24 36 6
A3879XPL-4.1 4,1 17 66 24 36 6
A3879XPL-4.2 4,2 17 66 24 36 6
A3879XPL-4.3 4,3 17 66 24 36 6
A3879XPL-4.4 4,4 17 66 24 36 6
A3879XPL-4.5 4,5 17 66 24 36 6
A3879XPL-4.6 4,6 17 66 24 36 6
A3879XPL-4.65 4,65 17 66 24 36 6
A3879XPL-4.7 4,7 17 66 24 36 6
A3879XPL-4.8 4,8 20 66 28 36 6
A3879XPL-4.9 4,9 20 66 28 36 6
A3879XPL-5 5 20 66 28 36 6
A3879XPL-5.1 5,1 20 66 28 36 6
A3879XPL-5.2 5,2 20 66 28 36 6
A3879XPL-5.3 5,3 20 66 28 36 6
A3879XPL-5.4 5,4 20 66 28 36 6
A3879XPL-5.5 5,5 20 66 28 36 6
A3879XPL-5.55 5,55 20 66 28 36 6
A3879XPL-5.6 5,6 20 66 28 36 6
A3879XPL-5.7 5,7 20 66 28 36 6
A3879XPL-5.8 5,8 20 66 28 36 6
A3879XPL-5.9 5,9 20 66 28 36 6
A3879XPL-6 6 20 66 28 36 6
A3879XPL-6.1 6,1 24 79 34 36 8
A3879XPL-6.2 6,2 24 79 34 36 8
A3879XPL-6.3 6,3 24 79 34 36 8
A3879XPL-6.4 6,4 24 79 34 36 8
A3879XPL-6.5 6,5 24 79 34 36 8
A3879XPL-6.6 6,6 24 79 34 36 8
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3879XPL-6.7 6,7 24 79 34 36 8
A3879XPL-6.8 6,8 24 79 34 36 8
Dc d1 A3879XPL-6.9 6,9 24 79 34 36 8
A3879XPL-7 7 24 79 34 36 8
Lc A3879XPL-7.1 7,1 29 79 41 36 8
l2 l5
l1 A3879XPL-7.2 7,2 29 79 41 36 8
A3879XPL-7.3 7,3 29 79 41 36 8
A3879XPL-7.4 7,4 29 79 41 36 8
A3879XPL-7.5 7,5 29 79 41 36 8
A3879XPL-7.55 7,55 29 79 41 36 8
A3879XPL-7.6 7,6 29 79 41 36 8
A3879XPL-7.8 7,8 29 79 41 36 8
A3879XPL-7.9 7,9 29 79 41 36 8
A3879XPL-8 8 29 79 41 36 8
A3879XPL-8.1 8,1 35 89 47 40 10
A3879XPL-8.2 8,2 35 89 47 40 10
A3879XPL-8.3 8,3 35 89 47 40 10
A3879XPL-8.4 8,4 35 89 47 40 10
A3879XPL-8.5 8,5 35 89 47 40 10
A3879XPL-8.6 8,6 35 89 47 40 10
A3879XPL-8.7 8,7 35 89 47 40 10
A3879XPL-8.8 8,8 35 89 47 40 10
A3879XPL-8.9 8,9 35 89 47 40 10
A3879XPL-9 9 35 89 47 40 10
A3879XPL-9.1 9,1 35 89 47 40 10
A3879XPL-9.2 9,2 35 89 47 40 10
A3879XPL-9.3 9,3 35 89 47 40 10
A3879XPL-9.4 9,4 35 89 47 40 10
A3879XPL-9.5 9,5 35 89 47 40 10
A3879XPL-9.55 9,55 35 89 47 40 10
A3879XPL-9.6 9,6 35 89 47 40 10
A3879XPL-9.7 9,7 35 89 47 40 10
A3879XPL-9.8 9,8 35 89 47 40 10
A3879XPL-9.9 9,9 35 89 47 40 10
A3879XPL-10 10 35 89 47 40 10
A3879XPL-10.1 10,1 40 102 55 45 12
A3879XPL-10.2 10,2 40 102 55 45 12
A3879XPL-10.3 10,3 40 102 55 45 12
A3879XPL-10.4 10,4 40 102 55 45 12
A3879XPL-10.5 10,5 40 102 55 45 12
A3879XPL-10.6 10,6 40 102 55 45 12
A3879XPL-10.7 10,7 40 102 55 45 12
A3879XPL-10.8 10,8 40 102 55 45 12
A3879XPL-10.9 10,9 40 102 55 45 12
A3879XPL-11 11 40 102 55 45 12
A3879XPL-11.1 11,1 40 102 55 45 12
A3879XPL-11.2 11,2 40 102 55 45 12
A3879XPL-11.3 11,3 40 102 55 45 12
A3879XPL-11.4 11,4 40 102 55 45 12
A3879XPL-11.5 11,5 40 102 55 45 12
A3879XPL-11.55 11,55 40 102 55 45 12
A3879XPL-11.6 11,6 40 102 55 45 12
A3879XPL-11.7 11,7 40 102 55 45 12
A3879XPL-11.8 11,8 40 102 55 45 12
A3879XPL-12 12 40 102 55 45 12
A3879XPL-12.1 12,1 43 107 60 45 14
A3879XPL-12.2 12,2 43 107 60 45 14
A3879XPL-12.25 12,25 43 107 60 45 14
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3879XPL-12.3 12,3 43 107 60 45 14
A3879XPL-12.4 12,4 43 107 60 45 14
Dc d1 A3879XPL-12.5 12,5 43 107 60 45 14
A3879XPL-12.6 12,6 43 107 60 45 14
Lc A3879XPL-12.7 12,7 1/2“ 43 107 60 45 14
l2 l5
l1 A3879XPL-12.75 12,75 43 107 60 45 14
A3879XPL-12.8 12,8 43 107 60 45 14
A3879XPL-12.9 12,9 43 107 60 45 14
A3879XPL-13 13 43 107 60 45 14
A3879XPL-13.1 13,1 43 107 60 45 14
A3879XPL-13.2 13,2 43 107 60 45 14
A3879XPL-13.3 13,3 43 107 60 45 14
A3879XPL-13.4 13,4 43 107 60 45 14
A3879XPL-13.5 13,5 43 107 60 45 14
A3879XPL-13.6 13,6 43 107 60 45 14
A3879XPL-13.7 13,7 43 107 60 45 14
A3879XPL-13.8 13,8 43 107 60 45 14
A3879XPL-13.9 13,9 43 107 60 45 14
A3879XPL-14 14 43 107 60 45 14
A3879XPL-14.1 14,1 45 115 65 48 16
A3879XPL-14.2 14,2 45 115 65 48 16
A3879XPL-14.3 14,3 45 115 65 48 16
A3879XPL-14.4 14,4 45 115 65 48 16
A3879XPL-14.5 14,5 45 115 65 48 16
A3879XPL-14.6 14,6 45 115 65 48 16
A3879XPL-14.7 14,7 45 115 65 48 16
A3879XPL-14.75 14,75 45 115 65 48 16
A3879XPL-14.8 14,8 45 115 65 48 16
A3879XPL-15 15 45 115 65 48 16
A3879XPL-15.1 15,1 45 115 65 48 16
A3879XPL-15.2 15,2 45 115 65 48 16
A3879XPL-15.3 15,3 45 115 65 48 16
A3879XPL-15.5 15,5 45 115 65 48 16
A3879XPL-15.6 15,6 45 115 65 48 16
A3879XPL-15.7 15,7 45 115 65 48 16
A3879XPL-15.8 15,8 45 115 65 48 16
A3879XPL-15.9 15,9 45 115 65 48 16
A3879XPL-16 16 45 115 65 48 16
A3879XPL-16.1 16,1 51 123 73 48 18
A3879XPL-16.2 16,2 51 123 73 48 18
A3879XPL-16.3 16,3 51 123 73 48 18
A3879XPL-16.4 16,4 51 123 73 48 18
A3879XPL-16.5 16,5 51 123 73 48 18
A3879XPL-16.6 16,6 51 123 73 48 18
A3879XPL-16.7 16,7 51 123 73 48 18
A3879XPL-16.75 16,75 51 123 73 48 18
A3879XPL-16.8 16,8 51 123 73 48 18
A3879XPL-17 17 51 123 73 48 18
A3879XPL-17.2 17,2 51 123 73 48 18
A3879XPL-17.3 17,3 51 123 73 48 18
A3879XPL-17.5 17,5 51 123 73 48 18
A3879XPL-17.6 17,6 51 123 73 48 18
A3879XPL-17.7 17,7 51 123 73 48 18
A3879XPL-17.8 17,8 51 123 73 48 18
A3879XPL-18 18 51 123 73 48 18
A3879XPL-18.2 18,2 55 131 79 50 20
A3879XPL-18.5 18,5 55 131 79 50 20
A3879XPL-18.7 18,7 55 131 79 50 20
A3879XPL-18.8 18,8 55 131 79 50 20
A3879XPL-19 19 55 131 79 50 20
A3879XPL-19.5 19,5 55 131 79 50 20
A3879XPL-19.7 19,7 55 131 79 50 20
A3879XPL-19.8 19,8 55 131 79 50 20
A3879XPL-20 20 55 131 79 50 20
XIII D1 B 424 B 123

Solid drilling
B1
A1164TIN
Alpha® 2
– Up to 1.9 mm dimensions in accordance with DIN 1897 DIN

3×Dc 6539
140°
P M K N S H O
TIN CC C CC CC C C C
Dc d1
Designation h7 Dc Lc l1 l2 h6
TIN mm inches/no. mm mm mm mm
Parallel shank A1164TIN-1.5 1,5 6 32 9 1,5
A1164TIN-1/16IN 1,588 1/16“ 7 34 10 1,588
Dc d1 A1164TIN-1.6 1,6 7 34 10 1,6
A1164TIN-1.7 1,7 7 34 10 1,7
Lc
A1164TIN-1.8 1,8 8 36 11 1,8
l2
l1 A1164TIN-1.82 1,82 8 36 11 1,82
A1164TIN-1.9 1,9 8 36 11 1,9
A1164TIN-5/64IN 1,984 5/64“ 8 38 12 1,984
A1164TIN-2 2 8 38 12 2
A1164TIN-2.05 2,05 8 38 12 2,05
A1164TIN-2.1 2,1 8 38 12 2,1
A1164TIN-2.2 2,2 9 40 13 2,2
A1164TIN-2.3 2,3 9 40 13 2,3
A1164TIN-3/32IN 2,381 3/32“ 10 43 14 2,381
A1164TIN-2.4 2,4 10 43 14 2,4
A1164TIN-2.5 2,5 10 43 14 2,5
A1164TIN-2.6 2,6 10 43 14 2,6
A1164TIN-2.7 2,7 11 46 16 2,7
A1164TIN-7/64IN 2,778 7/64“ 11 46 16 2,778
A1164TIN-2.8 2,8 11 46 16 2,8
A1164TIN-2.9 2,9 11 46 16 2,9
A1164TIN-3 3 11 46 16 3
A1164TIN-3.1 3,1 12 49 18 3,1
A1164TIN-1/8IN 3,175 1/8“ 12 49 18 3,175
A1164TIN-3.2 3,2 12 49 18 3,2
A1164TIN-3.25 3,25 12 49 18 3,25
A1164TIN-3.3 3,3 12 49 18 3,3
A1164TIN-3.4 3,4 14 52 20 3,4
A1164TIN-3.5 3,5 14 52 20 3,5
A1164TIN-9/64IN 3,572 9/64“ 14 52 20 3,572
A1164TIN-3.6 3,6 14 52 20 3,6
A1164TIN-3.65 3,65 14 52 20 3,65
A1164TIN-3.7 3,7 14 52 20 3,7
A1164TIN-3.8 3,8 15 55 22 3,8
A1164TIN-3.9 3,9 15 55 22 3,9
A1164TIN-5/32IN 3,969 5/32“ 15 55 22 3,969
A1164TIN-4 4 15 55 22 4
A1164TIN-4.1 4,1 15 55 22 4,1
A1164TIN-4.2 4,2 15 55 22 4,2
A1164TIN-4.3 4,3 16 58 24 4,3
A1164TIN-11/64IN 4,366 11/64“ 16 58 24 4,366
A1164TIN-4.4 4,4 16 58 24 4,4
A1164TIN-4.5 4,5 16 58 24 4,5
A1164TIN-4.6 4,6 16 58 24 4,6
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
A1164TIN-4.7 4,7 16 58 24 4,7
Dc d1 A1164TIN-3/16IN 4,763 3/16“ 18 62 26 4,763
A1164TIN-4.8 4,8 18 62 26 4,8
Lc
A1164TIN-4.9 4,9 18 62 26 4,9
l2
l1 A1164TIN-5 5 18 62 26 5
A1164TIN-5.1 5,1 18 62 26 5,1
A1164TIN-13/64IN 5,159 13/64“ 18 62 26 5,159
A1164TIN-5.2 5,2 18 62 26 5,2
A1164TIN-5.3 5,3 18 62 26 5,3
A1164TIN-5.4 5,4 19 66 28 5,4
A1164TIN-5.5 5,5 19 66 28 5,5
A1164TIN-5.55 5,55 19 66 28 5,55
A1164TIN-7/32IN 5,556 7/32“ 19 66 28 5,556
A1164TIN-5.6 5,6 19 66 28 5,6
A1164TIN-5.7 5,7 19 66 28 5,7
A1164TIN-5.8 5,8 19 66 28 5,8
A1164TIN-5.9 5,9 19 66 28 5,9
A1164TIN-15/64IN 5,953 15/64“ 19 66 28 5,953
A1164TIN-6 6 19 66 28 6
A1164TIN-6.1 6,1 20 70 31 6,1
A1164TIN-6.2 6,2 20 70 31 6,2
A1164TIN-6.3 6,3 20 70 31 6,3
A1164TIN-1/4IN 6,35 1/4“ 20 70 31 6,35
A1164TIN-6.4 6,4 20 70 31 6,4
A1164TIN-6.5 6,5 20 70 31 6,5
A1164TIN-6.6 6,6 20 70 31 6,6
A1164TIN-6.7 6,7 20 70 31 6,7
A1164TIN-17/64IN 6,747 17/64“ 22 74 34 6,747
A1164TIN-6.8 6,8 22 74 34 6,8
A1164TIN-6.9 6,9 22 74 34 6,9
A1164TIN-7 7 22 74 34 7
A1164TIN-7.1 7,1 22 74 34 7,1
A1164TIN-9/32IN 7,144 9/32“ 22 74 34 7,144
A1164TIN-7.2 7,2 22 74 34 7,2
A1164TIN-7.3 7,3 22 74 34 7,3
A1164TIN-7.4 7,4 22 74 34 7,4
A1164TIN-7.5 7,5 22 74 34 7,5
A1164TIN-7.6 7,6 25 79 37 7,6
A1164TIN-7.7 7,7 25 79 37 7,7
A1164TIN-7.8 7,8 25 79 37 7,8
A1164TIN-7.9 7,9 25 79 37 7,9
A1164TIN-5/16IN 7,938 5/16“ 25 79 37 7,938
A1164TIN-8 8 25 79 37 8
A1164TIN-8.1 8,1 24 79 37 8,1
A1164TIN-8.2 8,2 24 79 37 8,2
A1164TIN-8.3 8,3 24 79 37 8,3
A1164TIN-21/64IN 8,334 21/64“ 24 79 37 8,334
A1164TIN-8.4 8,4 24 79 37 8,4
A1164TIN-8.5 8,5 24 79 37 8,5
A1164TIN-8.6 8,6 25 84 40 8,6
A1164TIN-8.7 8,7 25 84 40 8,7
A1164TIN-8.8 8,8 25 84 40 8,8
A1164TIN-8.9 8,9 25 84 40 8,9
A1164TIN-9 9 25 84 40 9
A1164TIN-9.1 9,1 25 84 40 9,1
A1164TIN-23/64IN 9,128 23/64“ 25 84 40 9,128
A1164TIN-9.2 9,2 25 84 40 9,2
A1164TIN-9.3 9,3 25 84 40 9,3
A1164TIN-9.4 9,4 25 84 40 9,4
A1164TIN-9.5 9,5 25 84 40 9,5
A1164TIN-3/8IN 9,525 3/8“ 28 89 43 9,525
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
A1164TIN-9.7 9,7 28 89 43 9,7
Dc d1 A1164TIN-9.8 9,8 28 89 43 9,8
A1164TIN-9.9 9,9 28 89 43 9,9
Lc
A1164TIN-10 10 28 89 43 10
l2
l1 A1164TIN-10.1 10,1 27 89 43 10,1
A1164TIN-10.2 10,2 27 89 43 10,2
A1164TIN-10.3 10,3 27 89 43 10,3
A1164TIN-10.4 10,4 27 89 43 10,4
A1164TIN-10.5 10,5 27 89 43 10,5
A1164TIN-10.6 10,6 27 89 43 10,6
A1164TIN-10.7 10,7 29 95 47 10,7
A1164TIN-10.8 10,8 29 95 47 10,8
A1164TIN-10.9 10,9 29 95 47 10,9
A1164TIN-11 11 29 95 47 11
A1164TIN-11.1 11,1 29 95 47 11,1
A1164TIN-7/16IN 11,113 7/16“ 29 95 47 11,113
A1164TIN-11.2 11,2 29 95 47 11,2
A1164TIN-11.3 11,3 29 95 47 11,3
A1164TIN-11.4 11,4 29 95 47 11,4
A1164TIN-11.5 11,5 29 95 47 11,5
A1164TIN-11.6 11,6 29 95 47 11,6
A1164TIN-11.7 11,7 29 95 47 11,7
A1164TIN-11.8 11,8 29 95 47 11,8
A1164TIN-11.9 11,9 33 102 51 11,9
A1164TIN-15/32IN 11,906 15/32“ 33 102 51 11,906
A1164TIN-12 12 33 102 51 12
A1164TIN-12.1 12,1 37 102 51 12,1
A1164TIN-12.2 12,2 37 102 51 12,2
A1164TIN-12.3 12,3 37 102 51 12,3
A1164TIN-12.4 12,4 37 102 51 12,4
A1164TIN-12.5 12,5 37 102 51 12,5
A1164TIN-12.6 12,6 37 102 51 12,6
A1164TIN-1/2IN 12,7 1/2“ 37 102 51 12,7
A1164TIN-12.8 12,8 37 102 51 12,8
A1164TIN-12.9 12,9 37 102 51 12,9
A1164TIN-13 13 37 102 51 13
A1164TIN-13.1 13,1 37 102 51 13,1
A1164TIN-13.2 13,2 37 102 51 13,2
A1164TIN-13.3 13,3 40 107 54 13,3
A1164TIN-13.4 13,4 40 107 54 13,4
A1164TIN-13.5 13,5 40 107 54 13,5
A1164TIN-13.6 13,6 40 107 54 13,6
A1164TIN-13.7 13,7 40 107 54 13,7
A1164TIN-13.8 13,8 40 107 54 13,8
A1164TIN-13.9 13,9 40 107 54 13,9
A1164TIN-14 14 40 107 54 14
A1164TIN-14.1 14,1 41 111 56 14,1
A1164TIN-14.2 14,2 41 111 56 14,2
A1164TIN-9/16IN 14,288 9/16“ 41 111 56 14,288
A1164TIN-14.3 14,3 41 111 56 14,3
A1164TIN-14.4 14,4 41 111 56 14,4
A1164TIN-14.5 14,5 41 111 56 14,5
A1164TIN-14.6 14,6 41 111 56 14,6
A1164TIN-14.7 14,7 41 111 56 14,7
A1164TIN-14.8 14,8 41 111 56 14,8
A1164TIN-14.9 14,9 41 111 56 14,9
A1164TIN-15 15 41 111 56 15
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
A1164TIN-15.2 15,2 42 115 58 15,2
Dc d1 A1164TIN-15.3 15,3 42 115 58 15,3
A1164TIN-15.4 15,4 42 115 58 15,4
Lc
A1164TIN-15.5 15,5 42 115 58 15,5
l2
l1 A1164TIN-15.6 15,6 42 115 58 15,6
A1164TIN-15.7 15,7 42 115 58 15,7
A1164TIN-15.8 15,8 42 115 58 15,8
A1164TIN-5/8IN 15,875 5/8“ 42 115 58 15,875
A1164TIN-15.9 15,9 42 115 58 15,9
A1164TIN-16 16 42 115 58 16
A1164TIN-18 18 44 123 62 18
A1164TIN-19 19 45 127 64 19
A1164TIN-3/4IN 19,05 3/4“ 46 131 66 19,05
A1164TIN-19.5 19,5 46 131 66 19,5
A1164TIN-20 20 46 131 66 20
XIII D1 B 424 B 123

Solid drilling
B1
A1163
– Type N DIN
3×Dc 6539
118°
P M K N S H O
Uncoated C CC C CC
Dc d1
Designation h7 Lc l1 l2 h6
Uncoated mm mm mm mm mm
Parallel shank A1163-1 1 4 26 6 1
A1163-1.1 1,1 5 28 7 1,1
Dc d1 A1163-1.2 1,2 6 30 8 1,2
A1163-1.3 1,3 6 30 8 1,3
Lc
A1163-1.4 1,4 6 32 9 1,4
l2
l1 A1163-1.5 1,5 6 32 9 1,5
A1163-1.6 1,6 7 34 10 1,6
A1163-1.7 1,7 7 34 10 1,7
A1163-1.8 1,8 8 36 11 1,8
A1163-1.9 1,9 8 36 11 1,9
A1163-2 2 8 38 12 2
A1163-2.1 2,1 8 38 12 2,1
A1163-2.2 2,2 9 40 13 2,2
A1163-2.3 2,3 9 40 13 2,3
A1163-2.4 2,4 10 43 14 2,4
A1163-2.5 2,5 10 43 14 2,5
A1163-2.6 2,6 10 43 14 2,6
A1163-2.7 2,7 11 46 16 2,7
A1163-2.8 2,8 11 46 16 2,8
A1163-2.9 2,9 11 46 16 2,9
A1163-3 3 11 46 16 3
A1163-3.1 3,1 12 49 18 3,1
A1163-3.2 3,2 12 49 18 3,2
A1163-3.3 3,3 12 49 18 3,3
A1163-3.4 3,4 14 52 20 3,4
A1163-3.5 3,5 14 52 20 3,5
A1163-3.6 3,6 14 52 20 3,6
A1163-3.7 3,7 14 52 20 3,7
A1163-3.8 3,8 15 55 22 3,8
A1163-3.9 3,9 15 55 22 3,9
A1163-4 4 15 55 22 4
A1163-4.1 4,1 15 55 22 4,1
A1163-4.2 4,2 15 55 22 4,2
A1163-4.3 4,3 16 58 24 4,3
A1163-4.4 4,4 16 58 24 4,4
A1163-4.5 4,5 16 58 24 4,5
A1163-4.6 4,6 16 58 24 4,6
A1163-4.7 4,7 16 58 24 4,7
A1163-4.8 4,8 18 62 26 4,8
A1163-4.9 4,9 18 62 26 4,9
A1163-5 5 18 62 26 5
A1163-5.1 5,1 18 62 26 5,1
A1163-5.2 5,2 18 62 26 5,2
A1163-5.3 5,3 18 62 26 5,3
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1163-5.4 5,4 19 66 28 5,4
A1163-5.5 5,5 19 66 28 5,5
Dc d1 A1163-5.6 5,6 19 66 28 5,6
A1163-5.7 5,7 19 66 28 5,7
Lc
A1163-5.8 5,8 19 66 28 5,8
l2
l1 A1163-5.9 5,9 19 66 28 5,9
A1163-6 6 19 66 28 6
A1163-6.1 6,1 20 70 31 6,1
A1163-6.2 6,2 20 70 31 6,2
A1163-6.3 6,3 20 70 31 6,3
A1163-6.4 6,4 20 70 31 6,4
A1163-6.5 6,5 20 70 31 6,5
A1163-6.6 6,6 20 70 31 6,6
A1163-6.7 6,7 20 70 31 6,7
A1163-6.8 6,8 22 74 34 6,8
A1163-6.9 6,9 22 74 34 6,9
A1163-7 7 22 74 34 7
A1163-7.1 7,1 22 74 34 7,1
A1163-7.2 7,2 22 74 34 7,2
A1163-7.3 7,3 22 74 34 7,3
A1163-7.4 7,4 22 74 34 7,4
A1163-7.5 7,5 22 74 34 7,5
A1163-7.6 7,6 25 79 37 7,6
A1163-7.7 7,7 25 79 37 7,7
A1163-7.8 7,8 25 79 37 7,8
A1163-7.9 7,9 25 79 37 7,9
A1163-8 8 25 79 37 8
A1163-8.1 8,1 24 79 37 8,1
A1163-8.2 8,2 24 79 37 8,2
A1163-8.3 8,3 24 79 37 8,3
A1163-8.4 8,4 24 79 37 8,4
A1163-8.5 8,5 24 79 37 8,5
A1163-8.6 8,6 25 84 40 8,6
A1163-8.7 8,7 25 84 40 8,7
A1163-8.8 8,8 25 84 40 8,8
A1163-8.9 8,9 25 84 40 8,9
A1163-9 9 25 84 40 9
A1163-9.1 9,1 25 84 40 9,1
A1163-9.2 9,2 25 84 40 9,2
A1163-9.3 9,3 25 84 40 9,3
A1163-9.4 9,4 25 84 40 9,4
A1163-9.5 9,5 25 84 40 9,5
A1163-9.6 9,6 28 89 43 9,6
A1163-9.7 9,7 28 89 43 9,7
A1163-9.8 9,8 28 89 43 9,8
A1163-9.9 9,9 28 89 43 9,9
A1163-10 10 28 89 43 10
A1163-10.2 10,2 27 89 43 10,2
A1163-10.5 10,5 27 89 43 10,5
A1163-11 11 29 95 47 11
A1163-11.5 11,5 29 95 47 11,5
A1163-12 12 33 102 51 12
XIII D1 B 424 B 123

Solid drilling
B1
Solid carbide 3 Flute Drills
A1166TIN / A1166
3×Dc
– Overall length DIN 6539, flutes extended compared to DIN 6539 150°
P M K N S H O
TIN C C
Uncoated C C C C
Dc Dc d1
Designation Designation h7 inches/ Lc l1 l2 h6
TIN Uncoated mm no. mm mm mm mm
Parallel shank A1166TIN-3 A1166-3 3 17 46 22 3
A1166-3.1 3,1 18 49 24 3,1
Dc d1 A1166-1/8IN 3,175 1/8“ 18 49 24 3,175
A1166-3.2 3,2 18 49 24 3,2
Lc
A1166TIN-3.3 A1166-3.3 3,3 18 49 24 3,3
l2
l1 A1166-3.4 3,4 21 52 27 3,4
A1166TIN-3.5 A1166-3.5 3,5 21 52 27 3,5
A1166-9/64IN 3,572 9/64“ 21 52 27 3,572
A1166-3.6 3,6 21 52 27 3,6
A1166-3.7 3,7 21 52 27 3,7
A1166-3.8 3,8 23 55 30 3,8
A1166-3.9 3,9 23 55 30 3,9
A1166-5/32IN 3,969 5/32“ 23 55 30 3,969
A1166TIN-4 A1166-4 4 23 55 30 4
A1166-4.1 4,1 23 55 30 4,1
A1166TIN-4.2 A1166-4.2 4,2 23 55 30 4,2
A1166-4.3 4,3 24 58 32 4,3
A1166-4.4 4,4 24 58 32 4,4
A1166TIN-4.5 A1166-4.5 4,5 24 58 32 4,5
A1166TIN-4.6 A1166-4.6 4,6 24 58 32 4,6
A1166-4.7 4,7 24 58 32 4,7
A1166-3/16IN 4,763 3/16“ 27 62 35 4,763
A1166-4.8 4,8 27 62 35 4,8
A1166-4.9 4,9 27 62 35 4,9
A1166TIN-5 A1166-5 5 27 62 35 5
A1166-5.1 5,1 27 62 35 5,1
A1166-13/64IN 5,159 13/64“ 27 62 35 5,159
A1166-5.2 5,2 27 62 35 5,2
A1166-5.3 5,3 27 62 35 5,3
A1166-5.4 5,4 30 66 39 5,4
A1166TIN-5.5 A1166-5.5 5,5 30 66 39 5,5
A1166-7/32IN 5,556 7/32“ 30 66 39 5,556
A1166-5.6 5,6 30 66 39 5,6
A1166-5.7 5,7 30 66 39 5,7
A1166-5.8 5,8 30 66 39 5,8
A1166-5.9 5,9 30 66 39 5,9
A1166-15/64IN 5,953 15/64“ 30 66 39 5,953
A1166TIN-6 A1166-6 6 30 66 39 6
A1166-6.1 6,1 31 70 42 6,1
A1166-6.2 6,2 31 70 42 6,2
A1166-6.3 6,3 31 70 42 6,3
A1166-1/4IN 6,35 1/4“ 31 70 42 6,35
A1166-6.4 6,4 31 70 42 6,4
A1166TIN-6.5 A1166-6.5 6,5 31 70 42 6,5
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1166-6.6 6,6 31 70 42 6,6
A1166-6.7 6,7 31 70 42 6,7
Dc d1 A1166TIN-6.8 A1166-6.8 6,8 33 74 45 6,8
A1166-6.9 6,9 33 74 45 6,9
Lc
A1166TIN-7 A1166-7 7 33 74 45 7
l2
l1 A1166-7.1 7,1 33 74 45 7,1
A1166-7.2 7,2 33 74 45 7,2
A1166-7.3 7,3 33 74 45 7,3
A1166-7.4 7,4 33 74 45 7,4
A1166TIN-7.5 A1166-7.5 7,5 33 74 45 7,5
A1166-7.6 7,6 35 79 48 7,6
A1166-7.7 7,7 35 79 48 7,7
A1166TIN-7.8 A1166-7.8 7,8 35 79 48 7,8
A1166-7.9 7,9 35 79 48 7,9
A1166-5/16IN 7,938 5/16“ 35 79 48 7,938
A1166TIN-8 A1166-8 8 35 79 48 8
A1166-8.1 8,1 35 79 48 8,1
A1166-8.2 8,2 35 79 48 8,2
A1166-8.3 8,3 35 79 48 8,3
A1166-8.4 8,4 35 79 48 8,4
A1166TIN-8.5 A1166-8.5 8,5 35 79 48 8,5
A1166-8.6 8,6 37 84 52 8,6
A1166-8.7 8,7 37 84 52 8,7
A1166-8.8 8,8 37 84 52 8,8
A1166-8.9 8,9 37 84 52 8,9
A1166TIN-9 A1166-9 9 37 84 52 9
A1166-9.1 9,1 37 84 52 9,1
A1166-9.2 9,2 37 84 52 9,2
A1166-9.3 9,3 37 84 52 9,3
A1166-9.4 9,4 37 84 52 9,4
A1166TIN-9.5 A1166-9.5 9,5 37 84 52 9,5
A1166-9.6 9,6 39 89 55 9,6
A1166-9.7 9,7 39 89 55 9,7
A1166-9.8 9,8 39 89 55 9,8
A1166-9.9 9,9 39 89 55 9,9
A1166TIN-10 A1166-10 10 39 89 55 10
A1166-10.1 10,1 39 89 55 10,1
A1166TIN-10.2 A1166-10.2 10,2 39 89 55 10,2
A1166-10.3 10,3 39 89 55 10,3
A1166-10.4 10,4 39 89 55 10,4
A1166TIN-10.5 A1166-10.5 10,5 39 89 55 10,5
A1166-10.6 10,6 39 89 55 10,6
A1166-10.7 10,7 42 95 60 10,7
A1166-10.8 10,8 42 95 60 10,8
A1166-10.9 10,9 42 95 60 10,9
A1166TIN-11 A1166-11 11 42 95 60 11
A1166-11.1 11,1 42 95 60 11,1
A1166-11.2 11,2 42 95 60 11,2
A1166-11.3 11,3 42 95 60 11,3
A1166-11.4 11,4 42 95 60 11,4
A1166-11.5 11,5 42 95 60 11,5
A1166-11.6 11,6 42 95 60 11,6
A1166-11.7 11,7 42 95 60 11,7
A1166-11.8 11,8 42 95 60 11,8
A1166-11.9 11,9 51 102 65 11,9
A1166TIN-12 A1166-12 12 51 102 65 12
A1166-12.1 12,1 51 102 65 12,1
A1166-12.2 12,2 51 102 65 12,2
A1166-12.3 12,3 51 102 65 12,3
A1166-12.4 12,4 51 102 65 12,4
A1166-12.5 12,5 51 102 65 12,5
A1166-12.6 12,6 51 102 65 12,6
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1166-1/2IN 12,7 1/2“ 51 102 65 12,7
A1166-12.8 12,8 51 102 65 12,8
Dc d1 A1166-12.9 12,9 51 102 65 12,9
A1166TIN-13 A1166-13 13 51 102 65 13
Lc
A1166-13.1 13,1 51 102 65 13,1
l2
l1 A1166-13.2 13,2 51 102 65 13,2
A1166-13.3 13,3 52 107 66 13,3
A1166-13.4 13,4 52 107 66 13,4
A1166-13.5 13,5 52 107 66 13,5
A1166-13.6 13,6 52 107 66 13,6
A1166-13.7 13,7 52 107 66 13,7
A1166-13.8 13,8 52 107 66 13,8
A1166-13.9 13,9 52 107 66 13,9
A1166TIN-14 A1166-14 14 52 107 66 14
A1166-14.1 14,1 55 111 70 14,1
A1166-14.2 14,2 55 111 70 14,2
A1166-14.5 14,5 55 111 70 14,5
A1166-14.6 14,6 55 111 70 14,6
A1166-15 15 55 111 70 15
A1166-15.2 15,2 57 115 73 15,2
A1166-15.3 15,3 57 115 73 15,3
A1166-15.5 15,5 57 115 73 15,5
A1166-15.6 15,6 57 115 73 15,6
A1166-15.7 15,7 57 115 73 15,7
A1166-15.8 15,8 57 115 73 15,8
A1166TIN-16 A1166-16 16 57 115 73 16
A1166-16.5 16,5 56 119 73 16,5
A1166-17 17 56 119 73 17
A1166-17.5 17,5 58 123 76 17,5
A1166TIN-18 A1166-18 18 58 123 76 18
A1166-18.5 18,5 57 127 76 18,5
A1166-19 19 57 127 76 19
A1166-19.5 19,5 59 131 79 19,5
A1166TIN-20 A1166-20 20 59 131 79 20
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
A1167A
– Overall length DIN 6539, flutes extended compared to DIN 6539 3×Dc
150°
P M K N S H O
Uncoated C C
Dc d1
Parallel shank A1167A-3 3 17 46 22 3
A1167A-3.1 3,1 18 49 24 3,1
Dc d1 A1167A-3.2 3,2 18 49 24 3,2
A1167A-3.3 3,3 18 49 24 3,3
Lc
A1167A-3.4 3,4 21 52 27 3,4
l2
l1 A1167A-3.5 3,5 21 52 27 3,5
A1167A-3.6 3,6 21 52 27 3,6
A1167A-3.7 3,7 21 52 27 3,7
A1167A-3.8 3,8 23 55 30 3,8
A1167A-3.9 3,9 23 55 30 3,9
A1167A-4 4 23 55 30 4
A1167A-4.1 4,1 23 55 30 4,1
A1167A-4.2 4,2 23 55 30 4,2
A1167A-4.3 4,3 24 58 32 4,3
A1167A-4.4 4,4 24 58 32 4,4
A1167A-4.5 4,5 24 58 32 4,5
A1167A-4.6 4,6 24 58 32 4,6
A1167A-4.7 4,7 24 58 32 4,7
A1167A-4.8 4,8 27 62 35 4,8
A1167A-4.9 4,9 27 62 35 4,9
A1167A-5 5 27 62 35 5
A1167A-5.1 5,1 27 62 35 5,1
A1167A-5.2 5,2 27 62 35 5,2
A1167A-5.3 5,3 27 62 35 5,3
A1167A-5.4 5,4 30 66 39 5,4
A1167A-5.5 5,5 30 66 39 5,5
A1167A-5.6 5,6 30 66 39 5,6
A1167A-5.7 5,7 30 66 39 5,7
A1167A-5.8 5,8 30 66 39 5,8
A1167A-5.9 5,9 30 66 39 5,9
A1167A-6 6 30 66 39 6
A1167A-6.1 6,1 31 70 42 6,1
A1167A-6.2 6,2 31 70 42 6,2
A1167A-6.3 6,3 31 70 42 6,3
A1167A-6.4 6,4 31 70 42 6,4
A1167A-6.5 6,5 31 70 42 6,5
A1167A-6.6 6,6 31 70 42 6,6
A1167A-6.7 6,7 31 70 42 6,7
A1167A-6.8 6,8 33 74 45 6,8
A1167A-6.9 6,9 33 74 45 6,9
A1167A-7 7 33 74 45 7
A1167A-7.1 7,1 33 74 45 7,1
A1167A-7.2 7,2 33 74 45 7,2
A1167A-7.3 7,3 33 74 45 7,3
A1167A-7.4 7,4 33 74 45 7,4
A1167A-7.5 7,5 33 74 45 7,5
A1167A-7.6 7,6 35 79 48 7,6
A1167A-7.7 7,7 35 79 48 7,7
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1167A-7.8 7,8 35 79 48 7,8
A1167A-7.9 7,9 35 79 48 7,9
Dc d1 A1167A-8 8 35 79 48 8
A1167A-8.1 8,1 35 79 48 8,1
Lc
A1167A-8.2 8,2 35 79 48 8,2
l2
l1 A1167A-8.3 8,3 35 79 48 8,3
A1167A-8.4 8,4 35 79 48 8,4
A1167A-8.5 8,5 35 79 48 8,5
A1167A-8.6 8,6 37 84 52 8,6
A1167A-8.7 8,7 37 84 52 8,7
A1167A-8.8 8,8 37 84 52 8,8
A1167A-8.9 8,9 37 84 52 8,9
A1167A-9 9 37 84 52 9
A1167A-9.1 9,1 37 84 52 9,1
A1167A-9.2 9,2 37 84 52 9,2
A1167A-9.3 9,3 37 84 52 9,3
A1167A-9.4 9,4 37 84 52 9,4
A1167A-9.5 9,5 37 84 52 9,5
A1167A-9.6 9,6 39 89 55 9,6
A1167A-9.7 9,7 39 89 55 9,7
A1167A-9.8 9,8 39 89 55 9,8
A1167A-9.9 9,9 39 89 55 9,9
A1167A-10 10 39 89 55 10
A1167A-10.1 10,1 39 89 55 10,1
A1167A-10.2 10,2 39 89 55 10,2
A1167A-10.3 10,3 39 89 55 10,3
A1167A-10.4 10,4 39 89 55 10,4
A1167A-10.5 10,5 39 89 55 10,5
A1167A-10.6 10,6 39 89 55 10,6
A1167A-10.7 10,7 42 95 60 10,7
A1167A-10.8 10,8 42 95 60 10,8
A1167A-10.9 10,9 42 95 60 10,9
A1167A-11 11 42 95 60 11
A1167A-11.1 11,1 42 95 60 11,1
A1167A-11.2 11,2 42 95 60 11,2
A1167A-11.3 11,3 42 95 60 11,3
A1167A-11.4 11,4 42 95 60 11,4
A1167A-11.5 11,5 42 95 60 11,5
A1167A-11.6 11,6 42 95 60 11,6
A1167A-11.7 11,7 42 95 60 11,7
A1167A-11.8 11,8 42 95 60 11,8
A1167A-11.9 11,9 51 102 65 11,9
A1167A-12 12 51 102 65 12
A1167A-12.1 12,1 51 102 65 12,1
A1167A-12.2 12,2 51 102 65 12,2
A1167A-12.3 12,3 51 102 65 12,3
A1167A-12.5 12,5 51 102 65 12,5
A1167A-12.6 12,6 51 102 65 12,6
A1167A-12.7 12,7 51 102 65 12,7
A1167A-12.8 12,8 51 102 65 12,8
A1167A-13 13 51 102 65 13
A1167A-13.1 13,1 51 102 65 13,1
A1167A-13.2 13,2 51 102 65 13,2
A1167A-13.5 13,5 52 107 66 13,5
A1167A-13.6 13,6 52 107 66 13,6
A1167A-13.7 13,7 52 107 66 13,7
A1167A-13.8 13,8 52 107 66 13,8
A1167A-13.9 13,9 52 107 66 13,9
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1167A-14 14 52 107 66 14
A1167A-14.1 14,1 55 111 70 14,1
Dc d1 A1167A-14.2 14,2 55 111 70 14,2
A1167A-14.3 14,3 55 111 70 14,3
Lc
A1167A-14.4 14,4 55 111 70 14,4
l2
l1 A1167A-14.5 14,5 55 111 70 14,5
A1167A-14.6 14,6 55 111 70 14,6
A1167A-14.7 14,7 55 111 70 14,7
A1167A-14.8 14,8 55 111 70 14,8
A1167A-14.9 14,9 55 111 70 14,9
A1167A-15 15 55 111 70 15
A1167A-15.2 15,2 57 115 73 15,2
A1167A-15.7 15,7 57 115 73 15,7
A1167A-15.8 15,8 57 115 73 15,8
A1167A-15.9 15,9 57 115 73 15,9
A1167A-16 16 57 115 73 16
A1167A-16.5 16,5 56 119 73 16,5
A1167A-17 17 56 119 73 17
A1167A-17.5 17,5 58 123 76 17,5
A1167A-18 18 58 123 76 18
A1167A-18.5 18,5 57 127 76 18,5
A1167A-19 19 57 127 76 19
A1167A-19.5 19,5 59 131 79 19,5
A1167A-20 20 59 131 79 20
XIII D1 B 424 B 123

Solid drilling
B1
A1167B
– Overall length DIN 6539, flutes extended compared to DIN 6539 3×Dc
150°
P M K N S H O
Uncoated C
Dc d1
Parallel shank A1167B-3 3 17 46 22 3
A1167B-3.1 3,1 18 49 24 3,1
Dc d1 A1167B-3.2 3,2 18 49 24 3,2
A1167B-3.3 3,3 18 49 24 3,3
Lc
A1167B-3.4 3,4 21 52 27 3,4
l2
l1 A1167B-3.5 3,5 21 52 27 3,5
A1167B-3.6 3,6 21 52 27 3,6
A1167B-3.7 3,7 21 52 27 3,7
A1167B-3.9 3,9 23 55 30 3,9
A1167B-4 4 23 55 30 4
A1167B-4.1 4,1 23 55 30 4,1
A1167B-4.2 4,2 23 55 30 4,2
A1167B-4.3 4,3 24 58 32 4,3
A1167B-4.4 4,4 24 58 32 4,4
A1167B-4.5 4,5 24 58 32 4,5
A1167B-4.6 4,6 24 58 32 4,6
A1167B-4.7 4,7 24 58 32 4,7
A1167B-4.8 4,8 27 62 35 4,8
A1167B-4.9 4,9 27 62 35 4,9
A1167B-5 5 27 62 35 5
A1167B-5.1 5,1 27 62 35 5,1
A1167B-5.2 5,2 27 62 35 5,2
A1167B-5.3 5,3 27 62 35 5,3
A1167B-5.4 5,4 30 66 39 5,4
A1167B-5.5 5,5 30 66 39 5,5
A1167B-5.6 5,6 30 66 39 5,6
A1167B-5.7 5,7 30 66 39 5,7
A1167B-5.8 5,8 30 66 39 5,8
A1167B-5.9 5,9 30 66 39 5,9
A1167B-6 6 30 66 39 6
A1167B-6.1 6,1 31 70 42 6,1
A1167B-6.3 6,3 31 70 42 6,3
A1167B-6.4 6,4 31 70 42 6,4
A1167B-6.5 6,5 31 70 42 6,5
A1167B-6.6 6,6 31 70 42 6,6
A1167B-6.7 6,7 31 70 42 6,7
A1167B-6.8 6,8 33 74 45 6,8
A1167B-6.9 6,9 33 74 45 6,9
A1167B-7 7 33 74 45 7
A1167B-7.1 7,1 33 74 45 7,1
A1167B-7.3 7,3 33 74 45 7,3
A1167B-7.4 7,4 33 74 45 7,4
A1167B-7.5 7,5 33 74 45 7,5
A1167B-7.6 7,6 35 79 48 7,6
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1167B-7.7 7,7 35 79 48 7,7
A1167B-7.8 7,8 35 79 48 7,8
Dc d1 A1167B-8 8 35 79 48 8
A1167B-8.1 8,1 35 79 48 8,1
Lc
A1167B-8.2 8,2 35 79 48 8,2
l2
l1 A1167B-8.3 8,3 35 79 48 8,3
A1167B-8.5 8,5 35 79 48 8,5
A1167B-8.6 8,6 37 84 52 8,6
A1167B-8.7 8,7 37 84 52 8,7
A1167B-8.9 8,9 37 84 52 8,9
A1167B-9 9 37 84 52 9
A1167B-9.1 9,1 37 84 52 9,1
A1167B-9.2 9,2 37 84 52 9,2
A1167B-9.3 9,3 37 84 52 9,3
A1167B-9.4 9,4 37 84 52 9,4
A1167B-9.5 9,5 37 84 52 9,5
A1167B-9.6 9,6 39 89 55 9,6
A1167B-9.7 9,7 39 89 55 9,7
A1167B-9.8 9,8 39 89 55 9,8
A1167B-9.9 9,9 39 89 55 9,9
A1167B-10 10 39 89 55 10
A1167B-10.1 10,1 39 89 55 10,1
A1167B-10.2 10,2 39 89 55 10,2
A1167B-10.3 10,3 39 89 55 10,3
A1167B-10.4 10,4 39 89 55 10,4
A1167B-10.5 10,5 39 89 55 10,5
A1167B-10.6 10,6 39 89 55 10,6
A1167B-10.7 10,7 42 95 60 10,7
A1167B-10.8 10,8 42 95 60 10,8
A1167B-10.9 10,9 42 95 60 10,9
A1167B-11 11 42 95 60 11
A1167B-11.1 11,1 42 95 60 11,1
A1167B-11.2 11,2 42 95 60 11,2
A1167B-11.3 11,3 42 95 60 11,3
A1167B-11.4 11,4 42 95 60 11,4
A1167B-11.5 11,5 42 95 60 11,5
A1167B-11.6 11,6 42 95 60 11,6
A1167B-11.7 11,7 42 95 60 11,7
A1167B-11.8 11,8 42 95 60 11,8
A1167B-11.9 11,9 51 102 65 11,9
A1167B-12 12 51 102 65 12
A1167B-12.1 12,1 51 102 65 12,1
A1167B-12.2 12,2 51 102 65 12,2
A1167B-12.3 12,3 51 102 65 12,3
A1167B-12.4 12,4 51 102 65 12,4
A1167B-12.5 12,5 51 102 65 12,5
A1167B-12.6 12,6 51 102 65 12,6
A1167B-12.7 12,7 51 102 65 12,7
A1167B-12.8 12,8 51 102 65 12,8
A1167B-12.9 12,9 51 102 65 12,9
A1167B-13 13 51 102 65 13
A1167B-13.1 13,1 51 102 65 13,1
A1167B-13.2 13,2 51 102 65 13,2
A1167B-13.3 13,3 52 107 66 13,3
A1167B-13.4 13,4 52 107 66 13,4
A1167B-13.5 13,5 52 107 66 13,5
A1167B-13.6 13,6 52 107 66 13,6
A1167B-13.7 13,7 52 107 66 13,7
A1167B-13.8 13,8 52 107 66 13,8
A1167B-13.9 13,9 52 107 66 13,9
A1167B-14 14 52 107 66 14
A1167B-14.1 14,1 55 111 70 14,1
Continued
XIII D1 B 424 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1167B-14.2 14,2 55 111 70 14,2
A1167B-14.3 14,3 55 111 70 14,3
Dc d1 A1167B-14.4 14,4 55 111 70 14,4
A1167B-14.5 14,5 55 111 70 14,5
Lc
A1167B-14.6 14,6 55 111 70 14,6
l2
l1 A1167B-14.7 14,7 55 111 70 14,7
A1167B-14.8 14,8 55 111 70 14,8
A1167B-14.9 14,9 55 111 70 14,9
A1167B-15 15 55 111 70 15
A1167B-15.1 15,1 57 115 73 15,1
A1167B-15.2 15,2 57 115 73 15,2
A1167B-15.3 15,3 57 115 73 15,3
A1167B-15.4 15,4 57 115 73 15,4
A1167B-15.5 15,5 57 115 73 15,5
A1167B-15.6 15,6 57 115 73 15,6
A1167B-15.7 15,7 57 115 73 15,7
A1167B-15.8 15,8 57 115 73 15,8
A1167B-15.9 15,9 57 115 73 15,9
A1167B-16 16 57 115 73 16
A1167B-16.5 16,5 56 119 73 16,5
A1167B-17 17 56 119 73 17
A1167B-17.5 17,5 58 123 76 17,5
A1167B-18 18 58 123 76 18
A1167B-18.5 18,5 57 127 76 18,5
A1167B-19 19 57 127 76 19
A1167B-19.5 19,5 59 131 79 19,5
A1167B-20 20 59 131 79 20
plication
Primary ap
ation
Other applic
XIII D1 B 424 B 123

Solid drilling
B1
DC150 Perform
DIN
3×Dc 6537 K
140°
P M K N S H O
WJ30RE CC C CC C C C C
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-03.000A0- 3 14 62 20 36 6 b
DC150-03-03.100A0- 3,1 14 62 20 36 6 b
Dc d1 DC150-03-03.175A0- 3,175 1/8“ 14 62 20 36 6 b
DC150-03-03.200A0- 3,2 14 62 20 36 6 b
Lc
l2 l5
DC150-03-03.250A0- 3,25 14 62 20 36 6 b
l1 DC150-03-03.300A0- 3,3 14 62 20 36 6 b
DC150-03-03.400A0- 3,4 14 62 20 36 6 b
DC150-03-03.500A0- 3,5 14 62 20 36 6 b
DC150-03-03.572A0- 3,572 9/64“ 14 62 20 36 6 b
DC150-03-03.600A0- 3,6 14 62 20 36 6 b
DC150-03-03.700A0- 3,7 14 62 20 36 6 b
DC150-03-03.800A0- 3,8 17 66 24 36 6 b
DC150-03-03.900A0- 3,9 17 66 24 36 6 b
DC150-03-03.969A0- 3,969 5/32“ 17 66 24 36 6 b
DC150-03-04.000A0- 4 17 66 24 36 6 b
DC150-03-04.100A0- 4,1 17 66 24 36 6 b
DC150-03-04.200A0- 4,2 17 66 24 36 6 b
DC150-03-04.300A0- 4,3 17 66 24 36 6 b
DC150-03-04.366A0- 4,366 11/64“ 17 66 24 36 6 b
DC150-03-04.400A0- 4,4 17 66 24 36 6 b
DC150-03-04.500A0- 4,5 17 66 24 36 6 b
DC150-03-04.600A0- 4,6 17 66 24 36 6 b
DC150-03-04.650A0- 4,65 17 66 24 36 6 b
DC150-03-04.700A0- 4,7 17 66 24 36 6 b
DC150-03-04.763A0- 4,763 3/16“ 20 66 28 36 6 b
DC150-03-04.800A0- 4,8 20 66 28 36 6 b
DC150-03-04.900A0- 4,9 20 66 28 36 6 b
DC150-03-05.000A0- 5 20 66 28 36 6 b
DC150-03-05.100A0- 5,1 20 66 28 36 6 b
DC150-03-05.159A0- 5,159 13/64“ 20 66 28 36 6 b
DC150-03-05.200A0- 5,2 20 66 28 36 6 b
DC150-03-05.300A0- 5,3 20 66 28 36 6 b
DC150-03-05.400A0- 5,4 20 66 28 36 6 b
DC150-03-05.500A0- 5,5 20 66 28 36 6 b
DC150-03-05.550A0- 5,55 20 66 28 36 6 b
DC150-03-05.556A0- 5,556 7/32“ 20 66 28 36 6 b
DC150-03-05.600A0- 5,6 20 66 28 36 6 b
DC150-03-05.700A0- 5,7 20 66 28 36 6 b
DC150-03-05.800A0- 5,8 20 66 28 36 6 b
DC150-03-05.900A0- 5,9 20 66 28 36 6 b
DC150-03-05.953A0- 5,953 15/64“ 20 66 28 36 6 b
DC150-03-06.000A0- 6 20 66 28 36 6 b
DC150-03-06.100A0- 6,1 24 79 34 36 8 b
DC150-03-06.200A0- 6,2 24 79 34 36 8 b
DC150-03-06.300A0- 6,3 24 79 34 36 8 b
DC150-03-06.350A0- 6,35 1/4“ 24 79 34 36 8 b
DC150-03-06.400A0- 6,4 24 79 34 36 8 b
XIII D1 B 424 B 123

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-06.500A0- 6,5 24 79 34 36 8 b
DC150-03-06.600A0- 6,6 24 79 34 36 8 b
Dc d1 DC150-03-06.700A0- 6,7 24 79 34 36 8 b
DC150-03-06.747A0- 6,747 17/64“ 24 79 34 36 8 b
Lc
l2 l5
DC150-03-06.800A0- 6,8 24 79 34 36 8 b
l1 DC150-03-06.900A0- 6,9 24 79 34 36 8 b
DC150-03-07.000A0- 7 24 79 34 36 8 b
DC150-03-07.100A0- 7,1 29 79 41 36 8 b
DC150-03-07.144A0- 7,144 9/32“ 29 79 41 36 8 b
DC150-03-07.200A0- 7,2 29 79 41 36 8 b
DC150-03-07.300A0- 7,3 29 79 41 36 8 b
DC150-03-07.400A0- 7,4 29 79 41 36 8 b
DC150-03-07.500A0- 7,5 29 79 41 36 8 b
DC150-03-07.541A0- 7,541 19/64“ 29 79 41 36 8 b
DC150-03-07.600A0- 7,6 29 79 41 36 8 b
DC150-03-07.700A0- 7,7 29 79 41 36 8 b
DC150-03-07.800A0- 7,8 29 79 41 36 8 b
DC150-03-07.900A0- 7,9 29 79 41 36 8 b
DC150-03-07.938A0- 7,938 5/16“ 29 79 41 36 8 b
DC150-03-08.000A0- 8 29 79 41 36 8 b
DC150-03-08.100A0- 8,1 35 89 47 40 10 b
DC150-03-08.200A0- 8,2 35 89 47 40 10 b
DC150-03-08.300A0- 8,3 35 89 47 40 10 b
DC150-03-08.334A0- 8,334 21/64“ 35 89 47 40 10 b
DC150-03-08.400A0- 8,4 35 89 47 40 10 b
DC150-03-08.500A0- 8,5 35 89 47 40 10 b
DC150-03-08.600A0- 8,6 35 89 47 40 10 b
DC150-03-08.700A0- 8,7 35 89 47 40 10 b
DC150-03-08.731A0- 8,731 11/32“ 35 89 47 40 10 b
DC150-03-08.800A0- 8,8 35 89 47 40 10 b
DC150-03-08.900A0- 8,9 35 89 47 40 10 b
DC150-03-09.000A0- 9 35 89 47 40 10 b
DC150-03-09.100A0- 9,1 35 89 47 40 10 b
DC150-03-09.200A0- 9,2 35 89 47 40 10 b
DC150-03-09.300A0- 9,3 35 89 47 40 10 b
DC150-03-09.400A0- 9,4 35 89 47 40 10 b
DC150-03-09.500A0- 9,5 35 89 47 40 10 b
DC150-03-09.525A0- 9,525 3/8“ 35 89 47 40 10 b
DC150-03-09.600A0- 9,6 35 89 47 40 10 b
DC150-03-09.700A0- 9,7 35 89 47 40 10 b
DC150-03-09.800A0- 9,8 35 89 47 40 10 b
DC150-03-09.900A0- 9,9 35 89 47 40 10 b
DC150-03-09.922A0- 9,922 25/64“ 35 89 47 40 10 b
DC150-03-10.000A0- 10 35 89 47 40 10 b
DC150-03-10.100A0- 10,1 40 102 55 45 12 b
DC150-03-10.200A0- 10,2 40 102 55 45 12 b
DC150-03-10.300A0- 10,3 40 102 55 45 12 b
DC150-03-10.319A0- 10,319 13/32“ 40 102 55 45 12 b
DC150-03-10.400A0- 10,4 40 102 55 45 12 b
DC150-03-10.500A0- 10,5 40 102 55 45 12 b
DC150-03-10.600A0- 10,6 40 102 55 45 12 b
DC150-03-10.716A0- 10,716 27/64“ 40 102 55 45 12 b
DC150-03-10.800A0- 10,8 40 102 55 45 12 b
DC150-03-11.000A0- 11 40 102 55 45 12 b
DC150-03-11.100A0- 11,1 40 102 55 45 12 b
DC150-03-11.113A0- 11,113 7/16“ 40 102 55 45 12 b
DC150-03-11.200A0- 11,2 40 102 55 45 12 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 424 B 123

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HA DC150-03-11.300A0- 11,3 40 102 55 45 12 b
DC150-03-11.400A0- 11,4 40 102 55 45 12 b
Dc d1 DC150-03-11.500A0- 11,5 40 102 55 45 12 b
DC150-03-11.509A0- 11,509 29/64“ 40 102 55 45 12 b
Lc
l2 l5
DC150-03-11.700A0- 11,7 40 102 55 45 12 b
l1 DC150-03-11.800A0- 11,8 40 102 55 45 12 b
DC150-03-11.900A0- 11,9 40 102 55 45 12 b
DC150-03-12.000A0- 12 40 102 55 45 12 b
DC150-03-12.100A0- 12,1 43 107 60 45 14 b
DC150-03-12.200A0- 12,2 43 107 60 45 14 b
DC150-03-12.250A0- 12,25 43 107 60 45 14 b
DC150-03-12.300A0- 12,3 43 107 60 45 14 b
DC150-03-12.303A0- 12,303 31/64“ 43 107 60 45 14 b
DC150-03-12.500A0- 12,5 43 107 60 45 14 b
DC150-03-12.700A0- 12,7 1/2“ 43 107 60 45 14 b
DC150-03-12.800A0- 12,8 43 107 60 45 14 b
DC150-03-13.000A0- 13 43 107 60 45 14 b
DC150-03-13.100A0- 13,1 43 107 60 45 14 b
DC150-03-13.300A0- 13,3 43 107 60 45 14 b
DC150-03-13.494A0- 13,494 17/32“ 43 107 60 45 14 b
DC150-03-13.500A0- 13,5 43 107 60 45 14 b
DC150-03-14.000A0- 14 43 107 60 45 14 b
DC150-03-14.200A0- 14,2 45 115 65 48 16 b
DC150-03-14.288A0- 14,288 9/16“ 45 115 65 48 16 b
DC150-03-14.500A0- 14,5 45 115 65 48 16 b
DC150-03-14.700A0- 14,7 45 115 65 48 16 b
DC150-03-14.800A0- 14,8 45 115 65 48 16 b
DC150-03-15.000A0- 15 45 115 65 48 16 b
DC150-03-15.100A0- 15,1 45 115 65 48 16 b
DC150-03-15.500A0- 15,5 45 115 65 48 16 b
DC150-03-15.800A0- 15,8 45 115 65 48 16 b
DC150-03-15.875A0- 15,875 5/8“ 45 115 65 48 16 b
DC150-03-16.000A0- 16 45 115 65 48 16 b
DC150-03-16.500A0- 16,5 51 123 73 48 18 b
DC150-03-16.750A0- 16,75 51 123 73 48 18 b
DC150-03-17.000A0- 17 51 123 73 48 18 b
DC150-03-17.500A0- 17,5 51 123 73 48 18 b
DC150-03-17.800A0- 17,8 51 123 73 48 18 b
DC150-03-18.000A0- 18 51 123 73 48 18 b
DC150-03-19.000A0- 19 55 131 79 50 20 b
DC150-03-20.000A0- 20 55 131 79 50 20 b
Shank DIN 6535 HE DC150-03-03.000F0- 3 14 62 20 36 6 b
DC150-03-03.100F0- 3,1 14 62 20 36 6 b
Dc d1 DC150-03-03.200F0- 3,2 14 62 20 36 6 b
DC150-03-03.300F0- 3,3 14 62 20 36 6 b
Lc
l2 l5
DC150-03-03.400F0- 3,4 14 62 20 36 6 b
l1 DC150-03-03.500F0- 3,5 14 62 20 36 6 b
DC150-03-03.600F0- 3,6 14 62 20 36 6 b
DC150-03-03.700F0- 3,7 14 62 20 36 6 b
DC150-03-03.800F0- 3,8 17 66 24 36 6 b
DC150-03-03.900F0- 3,9 17 66 24 36 6 b
DC150-03-04.000F0- 4 17 66 24 36 6 b
DC150-03-04.200F0- 4,2 17 66 24 36 6 b
DC150-03-04.300F0- 4,3 17 66 24 36 6 b
DC150-03-04.500F0- 4,5 17 66 24 36 6 b
DC150-03-04.650F0- 4,65 17 66 24 36 6 b
DC150-03-04.700F0- 4,7 17 66 24 36 6 b
DC150-03-04.800F0- 4,8 20 66 28 36 6 b
DC150-03-05.000F0- 5 20 66 28 36 6 b
DC150-03-05.100F0- 5,1 20 66 28 36 6 b
DC150-03-05.300F0- 5,3 20 66 28 36 6 b
XIII D1 B 424 B 123

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HE DC150-03-05.500F0- 5,5 20 66 28 36 6 b
DC150-03-05.550F0- 5,55 20 66 28 36 6 b
Dc d1 DC150-03-05.600F0- 5,6 20 66 28 36 6 b
DC150-03-05.800F0- 5,8 20 66 28 36 6 b
Lc
l2 l5
DC150-03-06.000F0- 6 20 66 28 36 6 b
l1 DC150-03-06.100F0- 6,1 24 79 34 36 8 b
DC150-03-06.200F0- 6,2 24 79 34 36 8 b
DC150-03-06.300F0- 6,3 24 79 34 36 8 b
DC150-03-06.500F0- 6,5 24 79 34 36 8 b
DC150-03-06.600F0- 6,6 24 79 34 36 8 b
DC150-03-06.700F0- 6,7 24 79 34 36 8 b
DC150-03-06.800F0- 6,8 24 79 34 36 8 b
DC150-03-07.000F0- 7 24 79 34 36 8 b
DC150-03-07.100F0- 7,1 29 79 41 36 8 b
DC150-03-07.400F0- 7,4 29 79 41 36 8 b
DC150-03-07.500F0- 7,5 29 79 41 36 8 b
DC150-03-07.600F0- 7,6 29 79 41 36 8 b
DC150-03-07.800F0- 7,8 29 79 41 36 8 b
DC150-03-08.000F0- 8 29 79 41 36 8 b
DC150-03-08.100F0- 8,1 35 89 47 40 10 b
DC150-03-08.200F0- 8,2 35 89 47 40 10 b
DC150-03-08.300F0- 8,3 35 89 47 40 10 b
DC150-03-08.400F0- 8,4 35 89 47 40 10 b
DC150-03-08.500F0- 8,5 35 89 47 40 10 b
DC150-03-08.600F0- 8,6 35 89 47 40 10 b
DC150-03-08.700F0- 8,7 35 89 47 40 10 b
DC150-03-08.800F0- 8,8 35 89 47 40 10 b
DC150-03-09.000F0- 9 35 89 47 40 10 b
DC150-03-09.100F0- 9,1 35 89 47 40 10 b
DC150-03-09.500F0- 9,5 35 89 47 40 10 b
DC150-03-09.700F0- 9,5 35 89 47 40 10 b
DC150-03-09.800F0- 9,8 35 89 47 40 10 b
DC150-03-10.000F0- 10 35 89 47 40 10 b
DC150-03-10.100F0- 10,1 40 102 55 45 12 b
DC150-03-10.200F0- 10,2 40 102 55 45 12 b
DC150-03-10.300F0- 10,3 40 102 55 45 12 b
DC150-03-10.400F0- 10,4 40 102 55 45 12 b
DC150-03-10.500F0- 10,5 40 102 55 45 12 b
DC150-03-10.600F0- 10,6 40 102 55 45 12 b
DC150-03-10.800F0- 10,8 40 102 55 45 12 b
DC150-03-10.900F0- 10,9 40 102 55 45 12 b
DC150-03-11.000F0- 11 40 102 55 45 12 b
DC150-03-11.100F0- 11,1 40 102 55 45 12 b
DC150-03-11.200F0- 11,2 40 102 55 45 12 b
DC150-03-11.300F0- 11,3 40 102 55 45 12 b
DC150-03-11.500F0- 11,5 40 102 55 45 12 b
DC150-03-11.600F0- 11,6 40 102 55 45 12 b
DC150-03-11.800F0- 11,8 40 102 55 45 12 b
DC150-03-12.000F0- 12 40 102 55 45 12 b
DC150-03-12.200F0- 12,2 43 107 60 45 14 b
DC150-03-12.300F0- 12,3 43 107 60 45 14 b
DC150-03-12.500F0- 12,5 43 107 60 45 14 b
DC150-03-13.000F0- 13 43 107 60 45 14 b
DC150-03-13.200F0- 13,2 43 107 60 45 14 b
DC150-03-13.300F0- 13,3 43 107 60 45 14 b
DC150-03-13.400F0- 13,4 43 107 60 45 14 b
DC150-03-13.500F0- 13,5 43 107 60 45 14 b
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
machining co
XIII D1 B 424 B 123

Solid drilling
B1
Continued
WJ30RE
Dc Dc d1
Shank DIN 6535 HE DC150-03-13.600F0- 13,6 43 107 60 45 14 b
DC150-03-13.800F0- 13,8 43 107 60 45 14 b
Dc d1 DC150-03-14.000F0- 14 43 107 60 45 14 b
DC150-03-14.500F0- 14,5 45 115 65 48 16 b
Lc
l2 l5
DC150-03-15.000F0- 15 45 115 65 48 16 b
l1 DC150-03-15.100F0- 15,1 45 115 65 48 16 b
DC150-03-16.000F0- 16 45 115 65 48 16 b
DC150-03-16.500F0- 16,5 51 123 73 48 18 b
DC150-03-17.000F0- 17 51 123 73 48 18 b
DC150-03-17.500F0- 17,5 51 123 73 48 18 b
DC150-03-18.000F0- 18 51 123 73 48 18 b
DC150-03-18.500F0- 18,5 55 131 79 50 20 b
DC150-03-19.000F0- 19 55 131 79 50 20 b
DC150-03-20.000F0- 20 55 131 79 50 20 b
XIII D1 B 424 B 123

Solid drilling
B1
Solid carbide micro twist drills
DB133 Supreme
5×Dc
140°
P M K N S H O
WJ30EL CC CC CC C C C
WJ30EL
Dc Dc d1
Shank DIN 6535 HA DB133-05-00.500A0- 0,5 3,2 47 4 36 3 b
Dc
DB133-05-00.550A0- 0,55 4,1 47 5 35 3 b
DB133-05-00.600A0- 0,6 4,1 47 5 35 3 b
b
d1
DB133-05-00.650A0- 0,65 5 47 6 34 3
Lc
l2 l5
DB133-05-00.700A0- 0,7 4,9 48 6 35 3 b
l1 DB133-05-00.750A0- 0,75 5,8 48 7 34 3 b
DB133-05-00.794A0- 0,794 1/32“ 5,8 48 7 34 3 b
DB133-05-00.800A0- 0,8 5,8 48 7 34 3 b
DB133-05-00.850A0- 0,85 6,6 50 8 35 3 b
DB133-05-00.880A0- 0,88 6,6 50 8 35 3 b
DB133-05-00.900A0- 0,9 6,6 50 8 35 3 b
DB133-05-00.950A0- 0,95 7,5 50 9 34 3 b
DB133-05-01.000A0- 1 7,5 50 9 34 3 b
DB133-05-01.050A0- 1,05 7 51 9 36 3 b
DB133-05-01.080A0- 1,08 7 51 9 36 3 b
DB133-05-01.100A0- 1,1 7 51 9 36 3 b
DB133-05-01.150A0- 1,15 8 51 10 35 3 b
DB133-05-01.191A0- 1,191 3/64“ 8 51 10 35 3 b
DB133-05-01.200A0- 1,2 8 51 10 35 3 b
DB133-05-01.250A0- 1,25 9 51 11 34 3 b
DB133-05-01.300A0- 1,3 9 53 11 36 3 b
DB133-05-01.350A0- 1,35 9 53 12 35 3 b
DB133-05-01.400A0- 1,4 9 53 12 35 3 b
DB133-05-01.450A0- 1,45 10 53 13 34 3 b
DB133-05-01.500A0- 1,5 10 53 13 34 3 b
DB133-05-01.550A0- 1,55 11 54 14 35 3 b
DB133-05-01.588A0- 1,588 1/16“ 11 54 14 35 3 b
DB133-05-01.600A0- 1,6 11 54 14 35 3 b
DB133-05-01.650A0- 1,65 11 54 14 35 3 b
DB133-05-01.700A0- 1,7 11 54 14 35 3 b
DB133-05-01.750A0- 1,75 12 54 15 34 3 b
DB133-05-01.800A0- 1,8 12 54 15 34 3 b
DB133-05-01.820A0- 1,82 13 57 16 36 3 b
DB133-05-01.850A0- 1,85 13 57 16 36 3 b
DB133-05-01.900A0- 1,9 13 57 16 36 3 b
DB133-05-01.950A0- 1,95 14 57 17 35 3 b
DB133-05-01.984A0- 1,984 5/64“ 14 57 17 35 3 b
DB133-05-02.000A0- 2 14 57 17 35 3 b
DB133-05-02.050A0- 2,05 14 57 18 35 3 b
DB133-05-02.100A0- 2,1 14 57 18 35 3 b
DB133-05-02.150A0- 2,15 15 57 19 34 3 b
DB133-05-02.200A0- 2,2 15 57 19 34 3 b
DB133-05-02.250A0- 2,25 16 59 20 35 3 b
Ordering example for the WJ30EL grade: DB133-05-00.500A0-WJ30EL Continued
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
m achining co
XIII D1 B 426 B 123

Solid drilling
B1
Continued
WJ30EL
Dc Dc d1
Shank DIN 6535 HA DB133-05-02.300A0- 2,3 16 59 20 35 3 b
Dc
DB133-05-02.350A0- 2,35 16 59 20 35 3 b
DB133-05-02.381A0- 2,381 3/32“ 16 59 20 35 3 b
b
d1
DB133-05-02.400A0- 2,4 16 59 20 35 3
Lc
l2 l5
DB133-05-02.450A0- 2,45 17 59 21 34 3 b
l1 DB133-05-02.500A0- 2,5 17 59 21 34 3 b
DB133-05-02.550A0- 2,55 18 62 22 36 3 b
DB133-05-02.600A0- 2,6 18 62 22 36 3 b
DB133-05-02.650A0- 2,65 18 62 23 36 3 b
DB133-05-02.700A0- 2,7 18 62 23 36 3 b
DB133-05-02.750A0- 2,75 19 62 24 35 3 b
DB133-05-02.778A0- 2,778 7/64“ 19 62 24 35 3 b
DB133-05-02.800A0- 2,8 19 62 24 35 3 b
DB133-05-02.850A0- 2,85 20 62 25 34 3 b
DB133-05-02.900A0- 2,9 20 62 25 34 3 b
DB133-05-02.950A0- 2,95 20 62 25 34 3 b
Ordering example for the WJ30EL grade: DB133-05-00.500A0-WJ30EL
XIII D1 B 426 B 123

Solid drilling
B1
A3162
– Type ESU DIN

5×Dc 1899
118°
P M K N S H O
Uncoated CC CC CC CC CC CC
Dc d1
Designation 0-0,004 Lc l1 l2 h8
Parallel shank A3162-0.1 0,1 0,3 25 0,5 1
A3162-0.12 0,12 0,3 25 0,5 1
Dc
A3162-0.13 0,13 0,5 25 0,8 1
d1
A3162-0.14 0,14 0,5 25 0,8 1
Lc A3162-0.15 0,15 0,5 25 0,8 1
l2 A3162-0.16 0,16 0,8 25 1,1 1
l1
A3162-0.17 0,17 0,8 25 1,1 1
A3162-0.18 0,18 0,8 25 1,1 1
A3162-0.19 0,19 0,8 25 1,1 1
A3162-0.2 0,2 1,1 25 1,5 1
A3162-0.21 0,21 1,1 25 1,5 1
A3162-0.22 0,22 1,1 25 1,5 1
A3162-0.23 0,23 1,1 25 1,5 1
A3162-0.24 0,24 1,1 25 1,5 1
A3162-0.25 0,25 1,4 25 1,9 1
A3162-0.26 0,26 1,4 25 1,9 1
A3162-0.27 0,27 1,4 25 1,9 1
A3162-0.28 0,28 1,4 25 1,9 1
A3162-0.29 0,29 1,4 25 1,9 1
A3162-0.3 0,3 1,4 25 1,9 1
A3162-0.31 0,31 1,8 25 2,4 1
A3162-0.32 0,32 1,8 25 2,4 1
A3162-0.33 0,33 1,8 25 2,4 1
A3162-0.34 0,34 1,8 25 2,4 1
A3162-0.35 0,35 1,8 25 2,4 1
A3162-0.36 0,36 1,8 25 2,4 1
A3162-0.37 0,37 1,8 25 2,4 1
A3162-0.38 0,38 1,8 25 2,4 1
A3162-0.39 0,39 2,2 25 3 1
A3162-0.4 0,4 2,2 25 3 1
A3162-0.41 0,41 2,2 25 3 1
A3162-0.42 0,42 2,2 25 3 1
A3162-0.43 0,43 2,2 25 3 1
A3162-0.44 0,44 2,2 25 3 1
A3162-0.45 0,45 2,2 25 3 1
A3162-0.46 0,46 2,2 25 3 1
A3162-0.47 0,47 2,2 25 3 1
A3162-0.48 0,48 2,2 25 3 1
A3162-0.49 0,49 2,6 25 3,4 1
A3162-0.5 0,5 2,6 25 3,4 1
A3162-0.51 0,51 2,6 25 3,4 1
A3162-0.52 0,52 2,6 25 3,4 1
A3162-0.53 0,53 2,6 25 3,4 1
A3162-0.54 0,54 3 25 3,9 1
Continued
plication
Primary ap
ation
Other applic
D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A3162-0.55 0,55 3 25 3,9 1
A3162-0.56 0,56 3 25 3,9 1
Dc
A3162-0.57 0,57 3 25 3,9 1
d1
A3162-0.58 0,58 3 25 3,9 1
Lc A3162-0.59 0,59 3 25 3,9 1
l2 A3162-0.6 0,6 3 25 3,9 1
l1
A3162-0.61 0,61 3,1 25 4,2 1
A3162-0.62 0,62 3,1 25 4,2 1
A3162-0.63 0,63 3,1 25 4,2 1
A3162-0.64 0,64 3,1 25 4,2 1
A3162-0.65 0,65 3,1 25 4,2 1
A3162-0.67 0,67 3,1 25 4,2 1
A3162-0.68 0,68 3,6 25 4,8 1
A3162-0.69 0,69 3,6 25 4,8 1
A3162-0.7 0,7 3,6 25 4,8 1
A3162-0.71 0,71 3,6 25 4,8 1
A3162-0.72 0,72 3,6 25 4,8 1
A3162-0.73 0,73 3,6 25 4,8 1
A3162-0.74 0,74 3,6 25 4,8 1
A3162-0.75 0,75 3,6 25 4,8 1
A3162-0.77 0,77 4,1 25 5,3 1
A3162-0.78 0,78 4,1 25 5,3 1
A3162-0.79 0,79 4,1 25 5,3 1
A3162-0.8 0,8 4 25 5,3 1,5
A3162-0.81 0,81 4 25 5,3 1,5
A3162-0.82 0,82 4 25 5,3 1,5
A3162-0.83 0,83 4 25 5,3 1,5
A3162-0.84 0,84 4 25 5,3 1,5
A3162-0.85 0,85 4 25 5,3 1,5
A3162-0.86 0,86 4,5 25 6 1,5
A3162-0.87 0,87 4,5 25 6 1,5
A3162-0.88 0,88 4,5 25 6 1,5
A3162-0.89 0,89 4,5 25 6 1,5
A3162-0.9 0,9 4,5 25 6 1,5
A3162-0.91 0,91 4,5 25 6 1,5
A3162-0.92 0,92 4,5 25 6 1,5
A3162-0.93 0,93 4,5 25 6 1,5
A3162-0.94 0,94 4,5 25 6 1,5
A3162-0.95 0,95 4,5 25 6 1,5
A3162-0.96 0,96 5 25 6,8 1,5
A3162-0.97 0,97 5 25 6,8 1,5
A3162-0.98 0,98 5 25 6,8 1,5
A3162-0.99 0,99 5 25 6,8 1,5
A3162-1 1 5 25 6,8 1,5
A3162-1.05 1,05 5 25 6,8 1,5
A3162-1.1 1,1 5 25 7,6 1,5
A3162-1.15 1,15 5 25 7,6 1,5
A3162-1.2 1,2 6 25 8,5 1,5
A3162-1.25 1,25 6 25 8,5 1,5
A3162-1.3 1,3 6 25 8,5 1,5
A3162-1.35 1,35 7 25 9,5 1,5
A3162-1.4 1,4 7 25 9,5 1,5
A3162-1.45 1,45 7 25 9,5 1,5
D1 B 426 B 123

Solid drilling
B1
A3379XPL / A3979XPL
X·treme
DIN
5×Dc 6537 L
140°
P M K N S H O
XPL CC CC C C C C
Dc d1
Shank DIN 6535 HA A3379XPL-3 3 23 66 28 36 6
A3379XPL-3.1 3,1 23 66 28 36 6
d1 A3379XPL-1/8IN 3,175 1/8“ 23 66 28 36 6
Dc
A3379XPL-3.2 3,2 23 66 28 36 6
Lc A3379XPL-3.25 3,25 23 66 28 36 6
l2 l5
l1 A3379XPL-3.3 3,3 23 66 28 36 6
A3379XPL-3.4 3,4 23 66 28 36 6
A3379XPL-3.5 3,5 23 66 28 36 6
A3379XPL-9/64IN 3,572 9/64“ 23 66 28 36 6
A3379XPL-3.6 3,6 23 66 28 36 6
A3379XPL-3.65 3,65 23 66 28 36 6
A3379XPL-3.7 3,7 23 66 28 36 6
A3379XPL-3.8 3,8 29 74 36 36 6
A3379XPL-3.9 3,9 29 74 36 36 6
A3379XPL-5/32IN 3,969 5/32“ 29 74 36 36 6
A3379XPL-4 4 29 74 36 36 6
A3379XPL-4.1 4,1 29 74 36 36 6
A3379XPL-4.2 4,2 29 74 36 36 6
A3379XPL-4.3 4,3 29 74 36 36 6
A3379XPL-11/64IN 4,366 11/64“ 29 74 36 36 6
A3379XPL-4.4 4,4 29 74 36 36 6
A3379XPL-4.5 4,5 29 74 36 36 6
A3379XPL-4.6 4,6 29 74 36 36 6
A3379XPL-4.65 4,65 29 74 36 36 6
A3379XPL-4.7 4,7 29 74 36 36 6
A3379XPL-3/16IN 4,763 3/16“ 35 82 44 36 6
A3379XPL-4.8 4,8 35 82 44 36 6
A3379XPL-4.9 4,9 35 82 44 36 6
A3379XPL-5 5 35 82 44 36 6
A3379XPL-5.1 5,1 35 82 44 36 6
A3379XPL-13/64IN 5,159 13/64“ 35 82 44 36 6
A3379XPL-5.2 5,2 35 82 44 36 6
A3379XPL-5.3 5,3 35 82 44 36 6
A3379XPL-5.4 5,4 35 82 44 36 6
A3379XPL-5.5 5,5 35 82 44 36 6
A3379XPL-5.55 5,55 35 82 44 36 6
A3379XPL-7/32IN 5,556 7/32“ 35 82 44 36 6
A3379XPL-5.6 5,6 35 82 44 36 6
A3379XPL-5.7 5,7 35 82 44 36 6
A3379XPL-5.8 5,8 35 82 44 36 6
A3379XPL-5.9 5,9 35 82 44 36 6
A3379XPL-15/64IN 5,953 15/64“ 35 82 44 36 6
A3379XPL-6 6 35 82 44 36 6
A3379XPL-6.1 6,1 43 91 53 36 8
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3379XPL-6.2 6,2 43 91 53 36 8
A3379XPL-6.3 6,3 43 91 53 36 8
d1 A3379XPL-1/4IN 6,35 1/4“ 43 91 53 36 8
Dc
A3379XPL-6.4 6,4 43 91 53 36 8
Lc A3379XPL-6.5 6,5 43 91 53 36 8
l2 l5
l1 A3379XPL-6.6 6,6 43 91 53 36 8
A3379XPL-6.7 6,7 43 91 53 36 8
A3379XPL-17/64IN 6,747 17/64“ 43 91 53 36 8
A3379XPL-6.8 6,8 43 91 53 36 8
A3379XPL-6.9 6,9 43 91 53 36 8
A3379XPL-7 7 43 91 53 36 8
A3379XPL-7.1 7,1 43 91 53 36 8
A3379XPL-9/32IN 7,144 9/32“ 43 91 53 36 8
A3379XPL-7.2 7,2 43 91 53 36 8
A3379XPL-7.3 7,3 43 91 53 36 8
A3379XPL-7.4 7,4 43 91 53 36 8
A3379XPL-7.5 7,5 43 91 53 36 8
A3379XPL-19/64IN 7,541 19/64“ 43 91 53 36 8
A3379XPL-7.55 7,55 43 91 53 36 8
A3379XPL-7.6 7,6 43 91 53 36 8
A3379XPL-7.7 7,7 43 91 53 36 8
A3379XPL-7.8 7,8 43 91 53 36 8
A3379XPL-7.9 7,9 43 91 53 36 8
A3379XPL-5/16IN 7,938 5/16“ 43 91 53 36 8
A3379XPL-8 8 43 91 53 36 8
A3379XPL-8.1 8,1 49 103 61 40 10
A3379XPL-8.2 8,2 49 103 61 40 10
A3379XPL-8.3 8,3 49 103 61 40 10
A3379XPL-21/64IN 8,334 21/64“ 49 103 61 40 10
A3379XPL-8.4 8,4 49 103 61 40 10
A3379XPL-8.5 8,5 49 103 61 40 10
A3379XPL-8.6 8,6 49 103 61 40 10
A3379XPL-8.7 8,7 49 103 61 40 10
A3379XPL-11/32IN 8,731 11/32“ 49 103 61 40 10
A3379XPL-8.8 8,8 49 103 61 40 10
A3379XPL-8.9 8,9 49 103 61 40 10
A3379XPL-9 9 49 103 61 40 10
A3379XPL-9.1 9,1 49 103 61 40 10
A3379XPL-23/64IN 9,128 23/64“ 49 103 61 40 10
A3379XPL-9.2 9,2 49 103 61 40 10
A3379XPL-9.3 9,3 49 103 61 40 10
A3379XPL-9.4 9,4 49 103 61 40 10
A3379XPL-9.5 9,5 49 103 61 40 10
A3379XPL-3/8IN 9,525 3/8“ 49 103 61 40 10
A3379XPL-9.55 9,55 49 103 61 40 10
A3379XPL-9.6 9,6 49 103 61 40 10
A3379XPL-9.7 9,7 49 103 61 40 10
A3379XPL-9.8 9,8 49 103 61 40 10
A3379XPL-9.9 9,9 49 103 61 40 10
A3379XPL-25/64IN 9,922 25/64“ 49 103 61 40 10
A3379XPL-10 10 49 103 61 40 10
A3379XPL-10.1 10,1 56 118 71 45 12
A3379XPL-10.2 10,2 56 118 71 45 12
A3379XPL-10.3 10,3 56 118 71 45 12
A3379XPL-13/32IN 10,319 13/32“ 56 118 71 45 12
A3379XPL-10.4 10,4 56 118 71 45 12
A3379XPL-10.5 10,5 56 118 71 45 12
A3379XPL-10.6 10,6 56 118 71 45 12
A3379XPL-10.7 10,7 56 118 71 45 12
A3379XPL-27/64IN 10,716 27/64“ 56 118 71 45 12
A3379XPL-10.8 10,8 56 118 71 45 12
A3379XPL-10.9 10,9 56 118 71 45 12
Continued
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3379XPL-11 11 56 118 71 45 12
A3379XPL-11.1 11,1 56 118 71 45 12
d1 A3379XPL-7/16IN 11,113 7/16“ 56 118 71 45 12
Dc
A3379XPL-11.2 11,2 56 118 71 45 12
Lc A3379XPL-11.3 11,3 56 118 71 45 12
l2 l5
l1 A3379XPL-11.4 11,4 56 118 71 45 12
A3379XPL-11.5 11,5 56 118 71 45 12
A3379XPL-29/64IN 11,509 29/64“ 56 118 71 45 12
A3379XPL-11.55 11,55 56 118 71 45 12
A3379XPL-11.7 11,7 56 118 71 45 12
A3379XPL-11.8 11,8 56 118 71 45 12
A3379XPL-11.9 11,9 56 118 71 45 12
A3379XPL-15/32IN 11,906 15/32“ 56 118 71 45 12
A3379XPL-12 12 56 118 71 45 12
A3379XPL-12.1 12,1 60 124 77 45 14
A3379XPL-12.2 12,2 60 124 77 45 14
A3379XPL-12.25 12,25 60 124 77 45 14
A3379XPL-12.3 12,3 60 124 77 45 14
A3379XPL-31/64IN 12,303 31/64“ 60 124 77 45 14
A3379XPL-12.4 12,4 60 124 77 45 14
A3379XPL-12.5 12,5 60 124 77 45 14
A3379XPL-12.6 12,6 60 124 77 45 14
A3379XPL-1/2IN 12,7 1/2“ 60 124 77 45 14
A3379XPL-12.75 12,75 60 124 77 45 14
A3379XPL-12.9 12,9 60 124 77 45 14
A3379XPL-13 13 60 124 77 45 14
A3379XPL-13.1 13,1 60 124 77 45 14
A3379XPL-13.2 13,2 60 124 77 45 14
A3379XPL-13.3 13,3 60 124 77 45 14
A3379XPL-13.4 13,4 60 124 77 45 14
A3379XPL-17/32IN 13,494 17/32“ 60 124 77 45 14
A3379XPL-13.5 13,5 60 124 77 45 14
A3379XPL-13.6 13,6 60 124 77 45 14
A3379XPL-13.7 13,7 60 124 77 45 14
A3379XPL-13.9 13,9 60 124 77 45 14
A3379XPL-14 14 60 124 77 45 14
A3379XPL-14.1 14,1 63 133 83 48 16
A3379XPL-14.2 14,2 63 133 83 48 16
A3379XPL-9/16IN 14,288 9/16“ 63 133 83 48 16
A3379XPL-14.3 14,3 63 133 83 48 16
A3379XPL-14.4 14,4 63 133 83 48 16
A3379XPL-14.5 14,5 63 133 83 48 16
A3379XPL-14.6 14,6 63 133 83 48 16
A3379XPL-14.7 14,7 63 133 83 48 16
A3379XPL-14.75 14,75 63 133 83 48 16
A3379XPL-14.8 14,8 63 133 83 48 16
A3379XPL-15 15 63 133 83 48 16
A3379XPL-15.1 15,1 63 133 83 48 16
A3379XPL-15.3 15,3 63 133 83 48 16
A3379XPL-15.5 15,5 63 133 83 48 16
A3379XPL-15.6 15,6 63 133 83 48 16
A3379XPL-15.7 15,7 63 133 83 48 16
A3379XPL-15.8 15,8 63 133 83 48 16
A3379XPL-5/8IN 15,875 5/8“ 63 133 83 48 16
A3379XPL-15.9 15,9 63 133 83 48 16
A3379XPL-16 16 63 133 83 48 16
A3379XPL-16.1 16,1 71 143 93 48 18
A3379XPL-16.2 16,2 71 143 93 48 18
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3379XPL-16.3 16,3 71 143 93 48 18
A3379XPL-16.4 16,4 71 143 93 48 18
d1 A3379XPL-16.5 16,5 71 143 93 48 18
Dc
A3379XPL-16.6 16,6 71 143 93 48 18
Lc A3379XPL-16.7 16,7 71 143 93 48 18
l2 l5
l1 A3379XPL-16.75 16,75 71 143 93 48 18
A3379XPL-16.8 16,8 71 143 93 48 18
A3379XPL-17 17 71 143 93 48 18
A3379XPL-17.2 17,2 71 143 93 48 18
A3379XPL-17.3 17,3 71 143 93 48 18
A3379XPL-17.5 17,5 71 143 93 48 18
A3379XPL-17.6 17,6 71 143 93 48 18
A3379XPL-17.7 17,7 71 143 93 48 18
A3379XPL-17.8 17,8 71 143 93 48 18
A3379XPL-18 18 71 143 93 48 18
A3379XPL-18.2 18,2 77 153 101 50 20
A3379XPL-18.5 18,5 77 153 101 50 20
A3379XPL-18.7 18,7 77 153 101 50 20
A3379XPL-18.8 18,8 77 153 101 50 20
A3379XPL-19 19 77 153 101 50 20
A3379XPL-3/4IN 19,05 3/4“ 77 153 101 50 20
A3379XPL-19.5 19,5 77 153 101 50 20
A3379XPL-19.7 19,7 77 153 101 50 20
A3379XPL-19.8 19,8 77 153 101 50 20
A3379XPL-20 20 77 153 101 50 20
A3379XPL-20.5 20,5 86 166 108 56 25
A3379XPL-21 21 86 166 108 56 25
A3379XPL-21.5 21,5 86 166 108 56 25
A3379XPL-22 22 86 166 108 56 25
A3379XPL-22.5 22,5 91 173 115 56 25
A3379XPL-23 23 91 173 115 56 25
A3379XPL-23.5 23,5 91 173 115 56 25
A3379XPL-24 24 91 173 115 56 25
A3379XPL-24.5 24,5 97 180 122 56 25
A3379XPL-25 25 97 180 122 56 25
Shank DIN 6535 HE A3979XPL-3 3 23 66 28 36 6
A3979XPL-3.1 3,1 23 66 28 36 6
Dc d1 A3979XPL-3.2 3,2 23 66 28 36 6
A3979XPL-3.25 3,25 23 66 28 36 6
Lc A3979XPL-3.3 3,3 23 66 28 36 6
l2 l5
l1 A3979XPL-3.4 3,4 23 66 28 36 6
A3979XPL-3.5 3,5 23 66 28 36 6
A3979XPL-3.6 3,6 23 66 28 36 6
A3979XPL-3.65 3,65 23 66 28 36 6
A3979XPL-3.7 3,7 23 66 28 36 6
A3979XPL-3.8 3,8 29 74 36 36 6
A3979XPL-3.9 3,9 29 74 36 36 6
A3979XPL-4 4 29 74 36 36 6
A3979XPL-4.1 4,1 29 74 36 36 6
A3979XPL-4.2 4,2 29 74 36 36 6
A3979XPL-4.3 4,3 29 74 36 36 6
A3979XPL-4.4 4,4 29 74 36 36 6
A3979XPL-4.5 4,5 29 74 36 36 6
A3979XPL-4.6 4,6 29 74 36 36 6
A3979XPL-4.65 4,65 29 74 36 36 6
A3979XPL-4.7 4,7 29 74 36 36 6
A3979XPL-4.8 4,8 35 82 44 36 6
A3979XPL-4.9 4,9 35 82 44 36 6
A3979XPL-5 5 35 82 44 36 6
A3979XPL-5.1 5,1 35 82 44 36 6
A3979XPL-5.2 5,2 35 82 44 36 6
A3979XPL-5.3 5,3 35 82 44 36 6
Continued
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3979XPL-5.4 5,4 35 82 44 36 6
A3979XPL-5.5 5,5 35 82 44 36 6
Dc d1 A3979XPL-5.55 5,55 35 82 44 36 6
A3979XPL-5.6 5,6 35 82 44 36 6
Lc A3979XPL-5.7 5,7 35 82 44 36 6
l2 l5
l1 A3979XPL-5.8 5,8 35 82 44 36 6
A3979XPL-5.9 5,9 35 82 44 36 6
A3979XPL-6 6 35 82 44 36 6
A3979XPL-6.1 6,1 43 91 53 36 8
A3979XPL-6.2 6,2 43 91 53 36 8
A3979XPL-6.3 6,3 43 91 53 36 8
A3979XPL-6.4 6,4 43 91 53 36 8
A3979XPL-6.5 6,5 43 91 53 36 8
A3979XPL-6.6 6,6 43 91 53 36 8
A3979XPL-6.7 6,7 43 91 53 36 8
A3979XPL-6.8 6,8 43 91 53 36 8
A3979XPL-6.9 6,9 43 91 53 36 8
A3979XPL-7 7 43 91 53 36 8
A3979XPL-7.1 7,1 43 91 53 36 8
A3979XPL-7.2 7,2 43 91 53 36 8
A3979XPL-7.3 7,3 43 91 53 36 8
A3979XPL-7.4 7,4 43 91 53 36 8
A3979XPL-7.5 7,5 43 91 53 36 8
A3979XPL-7.55 7,55 43 91 53 36 8
A3979XPL-7.6 7,6 43 91 53 36 8
A3979XPL-7.7 7,7 43 91 53 36 8
A3979XPL-7.8 7,8 43 91 53 36 8
A3979XPL-7.9 7,9 43 91 53 36 8
A3979XPL-8 8 43 91 53 36 8
A3979XPL-8.1 8,1 49 103 61 40 10
A3979XPL-8.2 8,2 49 103 61 40 10
A3979XPL-8.3 8,3 49 103 61 40 10
A3979XPL-8.4 8,4 49 103 61 40 10
A3979XPL-8.5 8,5 49 103 61 40 10
A3979XPL-8.6 8,6 49 103 61 40 10
A3979XPL-8.7 8,7 49 103 61 40 10
A3979XPL-8.8 8,8 49 103 61 40 10
A3979XPL-8.9 8,9 49 103 61 40 10
A3979XPL-9 9 49 103 61 40 10
A3979XPL-9.1 9,1 49 103 61 40 10
A3979XPL-9.2 9,2 49 103 61 40 10
A3979XPL-9.3 9,3 49 103 61 40 10
A3979XPL-9.4 9,4 49 103 61 40 10
A3979XPL-9.5 9,5 49 103 61 40 10
A3979XPL-9.55 9,55 49 103 61 40 10
A3979XPL-9.6 9,6 49 103 61 40 10
A3979XPL-9.7 9,7 49 103 61 40 10
A3979XPL-9.8 9,8 49 103 61 40 10
A3979XPL-9.9 9,9 49 103 61 40 10
A3979XPL-10 10 49 103 61 40 10
A3979XPL-10.1 10,1 56 118 71 45 12
A3979XPL-10.2 10,2 56 118 71 45 12
A3979XPL-10.3 10,3 56 118 71 45 12
A3979XPL-10.4 10,4 56 118 71 45 12
A3979XPL-10.5 10,5 56 118 71 45 12
A3979XPL-10.6 10,6 56 118 71 45 12
A3979XPL-10.7 10,7 56 118 71 45 12
A3979XPL-10.8 10,8 56 118 71 45 12
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3979XPL-10.9 10,9 56 118 71 45 12
A3979XPL-11 11 56 118 71 45 12
Dc d1 A3979XPL-11.1 11,1 56 118 71 45 12
A3979XPL-11.2 11,2 56 118 71 45 12
Lc A3979XPL-11.3 11,3 56 118 71 45 12
l2 l5
l1 A3979XPL-11.4 11,4 56 118 71 45 12
A3979XPL-11.5 11,5 56 118 71 45 12
A3979XPL-11.55 11,55 56 118 71 45 12
A3979XPL-11.6 11,6 56 118 71 45 12
A3979XPL-11.7 11,7 56 118 71 45 12
A3979XPL-11.8 11,8 56 118 71 45 12
A3979XPL-11.9 11,9 56 118 71 45 12
A3979XPL-12 12 56 118 71 45 12
A3979XPL-12.1 12,1 60 124 77 45 14
A3979XPL-12.2 12,2 60 124 77 45 14
A3979XPL-12.25 12,25 60 124 77 45 14
A3979XPL-12.3 12,3 60 124 77 45 14
A3979XPL-12.4 12,4 60 124 77 45 14
A3979XPL-12.5 12,5 60 124 77 45 14
A3979XPL-12.6 12,6 60 124 77 45 14
A3979XPL-12.7 12,7 1/2“ 60 124 77 45 14
A3979XPL-12.75 12,75 60 124 77 45 14
A3979XPL-12.8 12,8 60 124 77 45 14
A3979XPL-12.9 12,9 60 124 77 45 14
A3979XPL-13 13 60 124 77 45 14
A3979XPL-13.1 13,1 60 124 77 45 14
A3979XPL-13.2 13,2 60 124 77 45 14
A3979XPL-13.3 13,3 60 124 77 45 14
A3979XPL-13.4 13,4 60 124 77 45 14
A3979XPL-13.5 13,5 60 124 77 45 14
A3979XPL-13.6 13,6 60 124 77 45 14
A3979XPL-13.7 13,7 60 124 77 45 14
A3979XPL-13.8 13,8 60 124 77 45 14
A3979XPL-13.9 13,9 60 124 77 45 14
A3979XPL-14 14 60 124 77 45 14
A3979XPL-14.1 14,1 63 133 83 48 16
A3979XPL-14.2 14,2 63 133 83 48 16
A3979XPL-14.3 14,3 63 133 83 48 16
A3979XPL-14.4 14,4 63 133 83 48 16
A3979XPL-14.5 14,5 63 133 83 48 16
A3979XPL-14.6 14,6 63 133 83 48 16
A3979XPL-14.7 14,7 63 133 83 48 16
A3979XPL-14.75 14,75 63 133 83 48 16
A3979XPL-14.8 14,8 63 133 83 48 16
A3979XPL-15 15 63 133 83 48 16
A3979XPL-15.1 15,1 63 133 83 48 16
A3979XPL-15.2 15,2 63 133 83 48 16
A3979XPL-15.3 15,3 63 133 83 48 16
A3979XPL-15.5 15,5 63 133 83 48 16
A3979XPL-15.6 15,6 63 133 83 48 16
A3979XPL-15.7 15,7 63 133 83 48 16
A3979XPL-15.8 15,8 63 133 83 48 16
A3979XPL-15.9 15,9 63 133 83 48 16
A3979XPL-16 16 63 133 83 48 16
A3979XPL-16.1 16,1 71 143 93 48 18
A3979XPL-16.2 16,2 71 143 93 48 18
A3979XPL-16.3 16,3 71 143 93 48 18
A3979XPL-16.4 16,4 71 143 93 48 18
A3979XPL-16.5 16,5 71 143 93 48 18
A3979XPL-16.6 16,6 71 143 93 48 18
A3979XPL-16.7 16,7 71 143 93 48 18
A3979XPL-16.75 16,75 71 143 93 48 18
Continued
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3979XPL-16.8 16,8 71 143 93 48 18
A3979XPL-17 17 71 143 93 48 18
Dc d1 A3979XPL-17.2 17,2 71 143 93 48 18
A3979XPL-17.3 17,3 71 143 93 48 18
Lc A3979XPL-17.5 17,5 71 143 93 48 18
l2 l5
l1 A3979XPL-17.6 17,6 71 143 93 48 18
A3979XPL-17.7 17,7 71 143 93 48 18
A3979XPL-17.8 17,8 71 143 93 48 18
A3979XPL-18 18 71 143 93 48 18
A3979XPL-18.2 18,2 77 153 101 50 20
A3979XPL-18.5 18,5 77 153 101 50 20
A3979XPL-18.7 18,7 77 153 101 50 20
A3979XPL-18.8 18,8 77 153 101 50 20
A3979XPL-19 19 77 153 101 50 20
A3979XPL-19.5 19,5 77 153 101 50 20
A3979XPL-19.7 19,7 77 153 101 50 20
A3979XPL-19.8 19,8 77 153 101 50 20
A3979XPL-20 20 77 153 101 50 20
A3979XPL-20.5 20,5 86 166 108 56 25
A3979XPL-21 21 86 166 108 56 25
A3979XPL-21.5 21,5 86 166 108 56 25
A3979XPL-22.5 22,5 91 173 115 56 25
A3979XPL-23 23 91 173 115 56 25
A3979XPL-23.5 23,5 91 173 115 56 25
A3979XPL-24 24 91 173 115 56 25
A3979XPL-24.5 24,5 97 180 122 56 25
A3979XPL-25 25 97 180 122 56 25
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
Solid carbide 3 flute drills
A3367 / A3967
BSX
– SX ground tip DIN

5×Dc 6537 L
130°
P M K N S H O
Uncoated CC CC C C
Dc d1
Uncoated mm inches/no. mm mm mm mm mm
Shank DIN 6535 HA A3367-3 3 23 66 28 36 6
A3367-3.15 3,15 23 66 28 36 6
d1
A3367-1/8IN 3,175 1/8“ 23 66 28 36 6
Dc
A3367-3.3 3,3 23 66 28 36 6
Lc A3367-3.5 3,5 23 66 28 36 6
l2 l5
l1 A3367-9/64IN 3,572 9/64“ 23 66 28 36 6
A3367-3.7 3,7 23 66 28 36 6
A3367-3.8 3,8 29 74 36 36 6
A3367-5/32IN 3,969 5/32“ 29 74 36 36 6
A3367-4 4 29 74 36 36 6
A3367-4.2 4,2 29 74 36 36 6
A3367-4.3 4,3 29 74 36 36 6
A3367-11/64IN 4,366 11/64“ 29 74 36 36 6
A3367-4.45 4,45 29 74 36 36 6
A3367-4.5 4,5 29 74 36 36 6
A3367-4.65 4,65 29 74 36 36 6
A3367-3/16IN 4,763 3/16“ 35 82 44 36 6
A3367-5 5 35 82 44 36 6
A3367-13/64IN 5,159 13/64“ 35 82 44 36 6
A3367-5.5 5,5 35 82 44 36 6
A3367-5.55 5,55 35 82 44 36 6
A3367-7/32IN 5,556 7/32“ 35 82 44 36 6
A3367-5.75 5,75 35 82 44 36 6
A3367-5.9 5,9 35 82 44 36 6
A3367-15/64IN 5,953 15/64“ 35 82 44 36 6
A3367-6 6 35 82 44 36 6
A3367-1/4IN 6,35 1/4“ 43 91 53 36 8
A3367-6.5 6,5 43 91 53 36 8
A3367-6.55 6,55 43 91 53 36 8
A3367-17/64IN 6,747 17/64“ 43 91 53 36 8
A3367-6.8 6,8 43 91 53 36 8
A3367-7 7 43 91 53 36 8
A3367-9/32IN 7,144 9/32“ 43 91 53 36 8
A3367-7.25 7,25 43 91 53 36 8
A3367-7.4 7,4 43 91 53 36 8
A3367-7.5 7,5 43 91 53 36 8
A3367-7.55 7,55 43 91 53 36 8
A3367-5/16IN 7,938 5/16“ 43 91 53 36 8
A3367-8 8 43 91 53 36 8
A3367-21/64IN 8,334 21/64“ 49 103 61 40 10
A3367-8.5 8,5 49 103 61 40 10
A3367-8.75 8,75 49 103 61 40 10
A3367-9 9 49 103 61 40 10
A3367-23/64IN 9,128 23/64“ 49 103 61 40 10
A3367-9.3 9,3 49 103 61 40 10
A3367-9.4 9,4 49 103 61 40 10
A3367-9.5 9,5 49 103 61 40 10
A3367-3/8IN 9,525 3/8“ 49 103 61 40 10
Continued
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HA A3367-9.55 9,55 49 103 61 40 10
A3367-25/64IN 9,922 25/64“ 49 103 61 40 10
d1
A3367-10 10 49 103 61 40 10
Dc
A3367-10.2 10,2 56 118 71 45 12
Lc A3367-10.5 10,5 56 118 71 45 12
l2 l5
l1 A3367-11 11 56 118 71 45 12
A3367-11.2 11,2 56 118 71 45 12
A3367-11.3 11,3 56 118 71 45 12
A3367-11.5 11,5 56 118 71 45 12
A3367-11.7 11,7 56 118 71 45 12
A3367-12 12 56 118 71 45 12
A3367-12.5 12,5 60 124 77 45 14
A3367-1/2IN 12,7 1/2“ 60 124 77 45 14
A3367-13 13 60 124 77 45 14
A3367-13.1 13,1 60 124 77 45 14
A3367-13.3 13,3 60 124 77 45 14
A3367-13.5 13,5 60 124 77 45 14
A3367-14 14 60 124 77 45 14
A3367-14.5 14,5 63 133 83 48 16
A3367-15 15 63 133 83 48 16
A3367-15.1 15,1 63 133 83 48 16
A3367-15.3 15,3 63 133 83 48 16
A3367-15.5 15,5 63 133 83 48 16
A3367-16 16 63 133 83 48 16
Shank DIN 6535 HE A3967-3 3 23 66 28 36 6
A3967-3.15 3,15 23 66 28 36 6
Dc d1
A3967-3.3 3,3 23 66 28 36 6
A3967-3.5 3,5 23 66 28 36 6
Lc A3967-3.7 3,7 23 66 28 36 6
l2 l5
l1 A3967-3.8 3,8 29 74 36 36 6
A3967-4 4 29 74 36 36 6
A3967-4.2 4,2 29 74 36 36 6
A3967-4.3 4,3 29 74 36 36 6
A3967-4.45 4,45 29 74 36 36 6
A3967-4.5 4,5 29 74 36 36 6
A3967-4.65 4,65 29 74 36 36 6
A3967-5 5 35 82 44 36 6
A3967-5.5 5,5 35 82 44 36 6
A3967-5.55 5,55 35 82 44 36 6
A3967-5.75 5,75 35 82 44 36 6
A3967-5.9 5,9 35 82 44 36 6
A3967-6 6 35 82 44 36 6
A3967-6.5 6,5 43 91 53 36 8
A3967-6.55 6,55 43 91 53 36 8
A3967-6.8 6,8 43 91 53 36 8
A3967-7 7 43 91 53 36 8
A3967-7.25 7,25 43 91 53 36 8
A3967-7.4 7,4 43 91 53 36 8
A3967-7.45 7,45 43 91 53 36 8
A3967-7.5 7,5 43 91 53 36 8
A3967-7.55 7,55 43 91 53 36 8
A3967-8 8 43 91 53 36 8
A3967-8.5 8,5 49 103 61 40 10
A3967-9 9 49 103 61 40 10
A3967-9.3 9,3 49 103 61 40 10
A3967-9.4 9,4 49 103 61 40 10
A3967-9.5 9,5 49 103 61 40 10
A3967-10 10 49 103 61 40 10
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Shank DIN 6535 HE A3967-10.2 10,2 56 118 71 45 12
A3967-10.5 10,5 56 118 71 45 12
Dc d1
A3967-11 11 56 118 71 45 12
A3967-11.2 11,2 56 118 71 45 12
Lc A3967-11.3 11,3 56 118 71 45 12
l2 l5
l1 A3967-11.5 11,5 56 118 71 45 12
A3967-11.55 11,55 56 118 71 45 12
A3967-11.7 11,7 56 118 71 45 12
A3967-12 12 56 118 71 45 12
A3967-12.5 12,5 60 124 77 45 14
A3967-13 13 60 124 77 45 14
A3967-13.1 13,1 60 124 77 45 14
A3967-13.3 13,3 60 124 77 45 14
A3967-13.5 13,5 60 124 77 45 14
A3967-14 14 60 124 77 45 14
A3967-14.5 14,5 63 133 83 48 16
A3967-15 15 63 133 83 48 16
A3967-15.1 15,1 63 133 83 48 16
A3967-15.3 15,3 63 133 83 48 16
A3967-15.5 15,5 63 133 83 48 16
A3967-16 16 63 133 83 48 16
XIII D1 B 426 B 123

Solid drilling
B1
Solid carbide micro twist drills
DB133 Supreme
8×Dc
140°
P M K N S H O
WJ30ER CC CC CC C C C
WJ30ER
Dc Dc d1
Shank DIN 6535 HA DB133-08-00.500A0- 0,5 5,2 48 6 35 3 b
Dc
DB133-08-00.600A0- 0,6 6,1 48 7 34 3 b
DB133-08-00.700A0- 0,7 6,9 50 8 35 3 b
b
d1
DB133-08-00.750A0- 0,75 7,8 50 9 34 3
Lc
l2 l5
DB133-08-00.794A0- 0,794 1/32“ 7,8 50 9 34 3 b
l1 DB133-08-00.800A0- 0,8 7,8 50 9 34 3 b
DB133-08-00.880A0- 0,88 8,6 53 10 36 3 b
DB133-08-00.900A0- 0,9 8,6 53 10 36 3 b
DB133-08-00.950A0- 0,95 10,5 53 12 34 3 b
DB133-08-01.000A0- 1 10,5 53 12 34 3 b
DB133-08-01.050A0- 1,05 11 54 13 35 3 b
DB133-08-01.100A0- 1,1 11 54 13 35 3 b
DB133-08-01.191A0- 1,191 3/64“ 12 54 14 34 3 b
DB133-08-01.200A0- 1,2 12 54 14 34 3 b
DB133-08-01.250A0- 1,25 12 54 14 34 3 b
DB133-08-01.300A0- 1,3 13 57 15 36 3 b
DB133-08-01.350A0- 1,35 13 57 16 35 3 b
DB133-08-01.400A0- 1,4 13 57 16 35 3 b
DB133-08-01.450A0- 1,45 14 57 17 34 3 b
DB133-08-01.500A0- 1,5 14 57 17 34 3 b
DB133-08-01.550A0- 1,55 15 60 18 37 3 b
DB133-08-01.588A0- 1,588 1/16“ 15 60 18 37 3 b
DB133-08-01.600A0- 1,6 15 60 18 37 3 b
DB133-08-01.650A0- 1,65 17 60 20 35 3 b
DB133-08-01.700A0- 1,7 17 60 20 35 3 b
DB133-08-01.750A0- 1,75 18 60 21 34 3 b
DB133-08-01.800A0- 1,8 18 60 21 34 3 b
DB133-08-01.820A0- 1,82 19 63 22 36 3 b
DB133-08-01.850A0- 1,85 19 63 22 36 3 b
DB133-08-01.900A0- 1,9 19 63 22 36 3 b
DB133-08-01.950A0- 1,95 20 63 23 35 3 b
DB133-08-01.984A0- 1,984 5/64“ 20 63 23 35 3 b
DB133-08-02.000A0- 2 20 63 23 35 3 b
DB133-08-02.050A0- 2,05 20 63 24 35 3 b
DB133-08-02.100A0- 2,1 20 63 24 35 3 b
DB133-08-02.150A0- 2,15 21 63 25 34 3 b
DB133-08-02.200A0- 2,2 21 63 25 34 3 b
DB133-08-02.250A0- 2,25 22 67 26 37 3 b
DB133-08-02.300A0- 2,3 22 67 26 37 3 b
DB133-08-02.350A0- 2,35 24 67 28 35 3 b
DB133-08-02.381A0- 2,381 3/32“ 24 67 28 35 3 b
DB133-08-02.400A0- 2,4 24 67 28 35 3 b
DB133-08-02.450A0- 2,45 25 67 29 34 3 b
Ordering example for the WJ30ER grade: DB133-08-00.500A0-WJ30ER Continued
Best tool fo
r Primary
application
Poor Other
Average application
Good
nditions
m achining co
XIII D1 B 426 B 123

Solid drilling
B1
Continued
WJ30ER
Dc Dc d1
Shank DIN 6535 HA DB133-08-02.500A0- 2,5 25 67 29 34 3 b
Dc
DB133-08-02.550A0- 2,55 26 71 30 37 3 b
DB133-08-02.600A0- 2,6 26 71 30 37 3 b
b
d1
DB133-08-02.650A0- 2,65 26 71 31 37 3
Lc
l2 l5
DB133-08-02.700A0- 2,7 26 71 31 37 3 b
l1 DB133-08-02.750A0- 2,75 27 71 32 36 3 b
DB133-08-02.778A0- 2,778 7/64“ 27 71 32 36 3 b
DB133-08-02.800A0- 2,8 27 71 32 36 3 b
DB133-08-02.850A0- 2,85 28 71 33 35 3 b
DB133-08-02.900A0- 2,9 28 71 33 35 3 b
DB133-08-02.950A0- 2,95 29 71 34 34 3 b
Ordering example for the WJ30ER grade: DB133-08-00.500A0-WJ30ER
XIII D1 B 426 B 123

Solid drilling
B1
A1276TFL
Alpha® 22
DIN
8×Dc 338
140°
P M K N S H O
TFL CC CC CC C
Dc d1
TFL mm mm mm mm mm
Parallel shank A1276TFL-3 3 28 61 33 3
A1276TFL-3.1 3,1 30 65 36 3,1
Dc d1 A1276TFL-3.2 3,2 30 65 36 3,2
A1276TFL-3.3 3,3 30 65 36 3,3
Lc
A1276TFL-3.4 3,4 33 70 39 3,4
l2
l1 A1276TFL-3.5 3,5 33 70 39 3,5
A1276TFL-3.7 3,7 33 70 39 3,7
A1276TFL-3.8 3,8 36 75 43 3,8
A1276TFL-4 4 36 75 43 4
A1276TFL-4.2 4,2 36 75 43 4,2
A1276TFL-4.3 4,3 39 80 47 4,3
A1276TFL-4.5 4,5 39 80 47 4,5
A1276TFL-4.7 4,7 39 80 47 4,7
A1276TFL-4.8 4,8 44 86 52 4,8
A1276TFL-5 5 44 86 52 5
A1276TFL-5.1 5,1 44 86 52 5,1
A1276TFL-5.2 5,2 44 86 52 5,2
A1276TFL-5.5 5,5 48 93 57 5,5
A1276TFL-5.8 5,8 48 93 57 5,8
A1276TFL-6 6 48 93 57 6
A1276TFL-6.1 6,1 52 101 63 6,1
A1276TFL-6.5 6,5 52 101 63 6,5
A1276TFL-6.6 6,6 52 101 63 6,6
A1276TFL-6.8 6,8 57 109 69 6,8
A1276TFL-7 7 57 109 69 7
A1276TFL-7.5 7,5 57 109 69 7,5
A1276TFL-7.8 7,8 62 117 75 7,8
A1276TFL-8 8 62 117 75 8
A1276TFL-8.1 8,1 62 117 75 8,1
A1276TFL-8.5 8,5 62 117 75 8,5
A1276TFL-9 9 66 125 81 9
A1276TFL-9.5 9,5 66 125 81 9,5
A1276TFL-10 10 71 133 87 10
A1276TFL-10.2 10,2 71 133 87 10,2
A1276TFL-10.5 10,5 71 133 87 10,5
A1276TFL-11 11 76 142 94 11
A1276TFL-12 12 87 151 101 12
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

Solid drilling
B1
A1263
– Type N DIN
8×Dc 338
118°
P M K N S H O
Uncoated C CC C CC
Dc d1
Parallel shank A1263-0.6 0,6 6,1 24 7 0,6
A1263-0.7 0,7 7,8 28 9 0,7
Dc d1 A1263-0.8 0,8 8,7 30 10 0,8
A1263-0.9 0,9 9,5 32 11 0,9
Lc A1263-1 1 10 34 12 1
l2
l1 A1263-1.1 1,1 12 36 14 1,1
A1263-1.2 1,2 14 38 16 1,2
A1263-1.3 1,3 14 38 16 1,3
A1263-1.4 1,4 15 40 18 1,4
A1263-1.5 1,5 15 40 18 1,5
A1263-1.6 1,6 17 43 20 1,6
A1263-1.7 1,7 17 43 20 1,7
A1263-1.8 1,8 19 46 22 1,8
A1263-1.9 1,9 19 46 22 1,9
A1263-2 2 20 49 24 2
A1263-2.1 2,1 20 49 24 2,1
A1263-2.2 2,2 23 53 27 2,2
A1263-2.3 2,3 23 53 27 2,3
A1263-2.4 2,4 26 57 30 2,4
A1263-2.5 2,5 26 57 30 2,5
A1263-2.6 2,6 26 57 30 2,6
A1263-2.7 2,7 28 61 33 2,7
A1263-2.8 2,8 28 61 33 2,8
A1263-2.9 2,9 28 61 33 2,9
A1263-3 3 28 61 33 3
A1263-3.1 3,1 30 65 36 3,1
A1263-3.2 3,2 30 65 36 3,2
A1263-3.3 3,3 30 65 36 3,3
A1263-3.4 3,4 33 70 39 3,4
A1263-3.5 3,5 33 70 39 3,5
A1263-3.6 3,6 33 70 39 3,6
A1263-3.7 3,7 33 70 39 3,7
A1263-3.8 3,8 36 75 43 3,8
A1263-3.9 3,9 36 75 43 3,9
A1263-4 4 36 75 43 4
A1263-4.1 4,1 36 75 43 4,1
A1263-4.2 4,2 36 75 43 4,2
A1263-4.3 4,3 39 80 47 4,3
A1263-4.4 4,4 39 80 47 4,4
A1263-4.5 4,5 39 80 47 4,5
A1263-4.6 4,6 39 80 47 4,6
A1263-4.7 4,7 39 80 47 4,7
A1263-4.8 4,8 44 86 52 4,8
A1263-4.9 4,9 44 86 52 4,9
A1263-5 5 44 86 52 5
A1263-5.1 5,1 44 86 52 5,1
A1263-5.2 5,2 44 86 52 5,2
A1263-5.3 5,3 44 86 52 5,3
Continued
XIII D1 B 426 B 123

Solid drilling
B1
Continued
Dc d1
Parallel shank A1263-5.4 5,4 48 93 57 5,4
A1263-5.5 5,5 48 93 57 5,5
Dc d1 A1263-5.6 5,6 48 93 57 5,6
A1263-5.7 5,7 48 93 57 5,7
Lc A1263-5.8 5,8 48 93 57 5,8
l2
l1 A1263-5.9 5,9 48 93 57 5,9
A1263-6 6 48 93 57 6
A1263-6.1 6,1 52 101 63 6,1
A1263-6.2 6,2 52 101 63 6,2
A1263-6.3 6,3 52 101 63 6,3
A1263-6.4 6,4 52 101 63 6,4
A1263-6.5 6,5 52 101 63 6,5
A1263-6.6 6,6 52 101 63 6,6
A1263-6.7 6,7 52 101 63 6,7
A1263-6.8 6,8 57 109 69 6,8
A1263-6.9 6,9 57 109 69 6,9
A1263-7 7 57 109 69 7
A1263-7.1 7,1 57 109 69 7,1
A1263-7.2 7,2 57 109 69 7,2
A1263-7.3 7,3 57 109 69 7,3
A1263-7.4 7,4 57 109 69 7,4
A1263-7.5 7,5 57 109 69 7,5
A1263-7.6 7,6 62 117 75 7,6
A1263-7.7 7,7 62 117 75 7,7
A1263-7.8 7,8 62 117 75 7,8
A1263-7.9 7,9 62 117 75 7,9
A1263-8 8 62 117 75 8
A1263-8.1 8,1 62 117 75 8,1
A1263-8.2 8,2 62 117 75 8,2
A1263-8.3 8,3 62 117 75 8,3
A1263-8.4 8,4 62 117 75 8,4
A1263-8.5 8,5 62 117 75 8,5
A1263-8.6 8,6 66 125 81 8,6
A1263-8.7 8,7 66 125 81 8,7
A1263-8.8 8,8 66 125 81 8,8
A1263-8.9 8,9 66 125 81 8,9
A1263-9 9 66 125 81 9
A1263-9.1 9,1 66 125 81 9,1
A1263-9.2 9,2 66 125 81 9,2
A1263-9.3 9,3 66 125 81 9,3
A1263-9.4 9,4 66 125 81 9,4
A1263-9.5 9,5 66 125 81 9,5
A1263-9.6 9,6 71 133 87 9,6
A1263-9.7 9,7 71 133 87 9,7
A1263-9.8 9,8 71 133 87 9,8
A1263-9.9 9,9 71 133 87 9,9
A1263-10 10 71 133 87 10
A1263-10.2 10,2 71 133 87 10,2
A1263-10.5 10,5 71 133 87 10,5
A1263-10.8 10,8 76 142 94 10,8
A1263-11 11 76 142 94 11
A1263-11.2 11,2 76 142 94 11,2
A1263-11.5 11,5 76 142 94 11,5
A1263-11.8 11,8 76 142 94 11,8
A1263-12 12 87 151 101 12
plication
Primary ap
ation
Other applic
XIII D1 B 426 B 123

B 169
Solid drilling
B1
Product range overview of bodies

and indexable inserts for chamfering
Machining
Drilling depth Lc Dc = 4–16 mm
Type Tool Indexable inserts

Designation D4580 VCGX
Xtra·tec®
Shank Collet –
Diameter range Dc [mm] 4–16 4–16
Page B 172 B 173
B 170 Drilling/chamfering tools

Solid drilling
B1
Designation key for Walter drilling tools
D 4 5 80 – 45 08.00 A16 – VC09

1 2 3 4 5 6 7 8 9
1 2 3 4 5
Tool group Generation Tool type Tool type 1. Delimiters
D Drilling 5 Chamfering tool 80 Compact – Metric

chamfering tool
. Inches
6 7 8 9
Cutting diameter/ Shank type and size
Chamfer angle Insert size/interface size
clamping diameter chamfering tool cylindrical
45° Chamfer angle A12 12 mm VC09 Metric
A16 16 mm
A20 20 mm
A25 25 mm
A13 0.500"
A15 0.625"
A19 0.750"
A26 1.000"
Drilling/chamfering tools B 171

Solid drilling
B1
Chamfering tool
D4580
Xtra·tec®
Dc
4−16 Z =2
P M K N S H O
D4580 CC C CC CC C
No. of Indexable
Tool Dc min Dc max d11 d1 d4 l4 l5 indexable insert
Designation mm mm mm mm mm mm mm inserts type
D4580-45-06.00A12-VC09 4,0 6,0 6,0 12,0 21,0 25,0 41,0 0,03 2 VC..09..
d11 d1 d4
D4580-45-08.00A16-VC09 6,1 8,0 8,0 16,0 25,0 25,0 44,5 0,04 2 VC..09..
D4580-45-10.00A16-VC09 8,1 10,0 10,0 16,0 25,0 25,0 44,5 0,05 2 VC..09..
D4580-45-12.00A20-VC09 10,1 12,0 12,0 20,0 28,0 25,0 46,5 0,06 2 VC..09..
l5
D4580-45-14.00A20-VC09 12,1 14,0 14,0 20,0 30,0 25,0 46,5 0,07 2 VC..09..
l4
45°
D4580-45-16.00A25-VC09 14,1 16,0 16,0 25,0 32,0 34,0 53,0 0,08 2 VC..09..
Lc
Dc
The drill is not included in the scope of delivery.

Technical information from page B 442 onwards.
B 172 Drilling/chamfering tools

Solid drilling
B1
Assembly parts
Indexable insert type VC . X09 . .
Cartridge FK390
Clamping screw FS2111

for indexable insert T7 1P (Torx 7IP)
Adjusting screw FS2029
Accessories
Indexable insert type VC . X09 . .
FS1490
Torx key
T7 1P (Torx 7IP)
Key ISO 2936-1,5 (SW 1,5)
r
Positive basic shape
VCGX d
7˚
35˚
l s
Indexable inserts
P M K S
HC HC HC HC HC
WXP30
Number
of cutting l s r d
Designation edges mm mm mm mm
VCGX0902ACFR 2 9,0 2,5 0,2 5,556 c
HC = Coated carbide
D1 B 443
Drilling/chamfering tools B 173

Solid drilling
B1
Product range overview of indexable inserts for drilling from solid
Insert shape Insert shape Description Page
Solid drilling P6001 . .

P6003 . . For solid drilling B 180
P6004 . .
P6005 . .
T For chamfering B 184
L For solid drilling B 188
W For solid drilling B 189
B 174 Indexable inserts for drilling

Solid drilling
B1
Designation key
for square indexable inserts for solid drilling
P 284 0 S – 2 N – A57
1 2 3 4 5 6
1 2 3 4
Walter indexable insert
Version Position Insert size
designation
P284 For B321x drills 0 Ground C Centre insert
P484 For B421x drills 1 Sintered P Outer insert

Centre insert and
S outer insert identical
5 6
Cutting direction Walter geometry
R RH-cutting A57 The stable one
N Neutral E57 The universal one
E67 The sharp one
Designation key
for exchangeable inserts for use in a Point Drill
P 600 5 – D 18,50 R WKK45C

1 2 3 4 5
1 2 3 4
Walter exchangeable insert
Walter geometry Insert diameter Cutting direction
designation
P600 For B401x drills 1 For ISO P D In mm R RH-cutting
3 For ISO M and ISO S
4 For ISO N
5 For ISO K
Coating

Solid drilling
B1

for indexable inserts for solid drilling
L C M X 06 T2 04 – D57
1 2 3 4 5 6 7 8
1 2 3

L W 80° C 7° O 8°
m d m s
T
E ± 0,025 ± 0,025 ± 0,025
d
M ± 0,05–0,152 ± 0,08–0,202 ± 0,130
1
s Inserts with ground planar cutting edges
2
Depending on the insert size (see ISO standard 1832)
4 5 6
Machining and fastening features Cutting edge length Insert thickness
s 02 s = 2,38
Drawing or precise description
A X of the indexable insert is required T1 s = 2,78
l
l 03 s = 3,18
T3 s = 3,97
B
04 s = 4,76
05 s = 5,56
06 s = 6,35
7 8
Corner radius Manufacturer specifications
02 r = 0,2
04 r = 0,4 The ISO code includes nine symbols. The eighth and/or ninth symbols should only be used when required.
r r = 0,8
08 The manufacturer can add other symbols which can be combined with the ISO code by means of a hyphen
(e.g. for the chip breaker form).
Solid drilling A 57, B 57, D 57, E 57, E 67

Solid drilling
B1
Designation key
for cutting material grades – Drilling
W K P 25 S
Walter 1 2 3 4
1 2 3 4
or coating type
P Steel P Steel Wear resistance S Tiger·tec® Silver
M Stainless steel M Stainless steel 01 C Color Select

10
K Cast iron K Cast iron
15
N NF metals N NF metals 20
Materials Materials 25
S with difficult cutting properties S with difficult cutting properties
30
35
45
A CVD aluminium coating
Toughness
X PVD coating
Geometry designation key for indexable inserts for solid drilling
B 5 7
1 2 3
1 2 3
Chip breaker groove Cutting edge Flank face design
smaller heavily
A = 0° chamfered 5
B = 6°
2
6
D = 10°
E = 15°
5 7
F = 16°
G = 20° 8 8
K = 25°
larger sharp

Solid drilling
B1
Walter Select for indexable inserts for solid drilling

Step by step to the right indexable insert
STEP 1
Determine the material to be machined from Code Machining
page B 1174 onwards. letters group Groups of the materials to be machined
Note the machining group that corresponds All types of steel and steel casting,
to your material, e.g.: P10. P P1–P15 Steel with the exception of steel with an austenitic
structure


vermicular graphite

High-temperature
S S1–S10 alloys and
nickel and cobalt, titanium and titanium alloys
titanium alloys

chilled cast iron

O O1–O6 Other
plastics, graphite

and workpiece
Tool projection very good good moderate
Short projection length a b c

Long projection length b c

Solid drilling
B1
STEP 3
Drilling depth Page
Select your tool according to your application
and individual requirements. 1 × Dc B 200
Then select your drill from the corresponding
tool page. 2 × Dc B 198
3 × Dc B 202
4 × Dc B 230
5 × Dc B 204
7 × Dc B 208
10 × Dc B 212
STEP 4 140˚ 140˚

Drill inserts
P6001, P6003, P6004, P6005
Determine your optimum indexable insert P6001
P6003
d1 P6005 d1
P6004
For Xtra·tec® Point Drill
grade and geometry on the appropriate Dc Dc
s s
tool page.
When doing so, please take into consideration Drill inserts
the machining conditions (step 2) and the P6001 P6003 P6003 P6005 P6004 P6003
cutting edges
material to be machined.
Number of
P P M K N S
Dc
HC HC HC HC HC
Dc inches/ d1 s
Designation mm no. mm mm WPP45C WMP35 WMP35 WKK45C WNN25 WMP35
P6001 P60..-D12,00R 2 12 3 3,6 b c b c b b
P60..-D12,10R 2 12,1 3 3,6 b c b c b
P60..-D12,20R 2 12,2 3 3,6 b c b c b
P60..-D12,30R 2 12,3 3 3,6 b c b c b
P60..-D12,40R 2 12,4 3 3,6 b c b c b
P60..-D12,50R 2 12,5 3 3,6 b c b c b b
P6003 P60..-D12,60R 2 12,6 3 3,6 b c b c b
P60..-D12,70R 2 12,7 1/2“ 3 3,6 b c b c b
rt for P60..-D12,80R 2 12,8 3 3,6 b c b c b
dexable inse
Optimum in b c b c b
P60..-D12,90R 2 12,9 3 3,6
P60..-D12,95R 2 12,95 3 3,6 b c b c b
P60..-D13,00R 2 13 3 3,6 b c b c b b
P6004 P60..-D13,10R 2 13,1 3 3,6 c
Poor P60..-D13,11R 2 13,11 3 3,6 b c b c b
Average b c b c b
Good P60..-D13,20R 2 13,2 3 3,6
itions b c b c b
machining cond P60..-D13,25R 2 13,25 3 3,6
P60..-D13,30R 2 13,3 3 3,6 b c b c b
P60..-D13,40R 2 13,4 3 3,6 b c b c b
STEP 5 Cutting data for solid drilling

using the Xtra·tec® Point Drill
Select the cutting data from page B 444
onwards. = Wet machining (E = emulsion, O = oil)
Drilling depth 1,3 × Dc
Designation B4011
= Dry machining is possible (M = MQL, L = dry)
The cutting data must be selected from Walter GPS Diameter range 12–25
vc = Cutting speed
VRR = Feed rating chart from page B 429 onwards
* The classification of the machining groups can be found in the material group comparison table
Tensile strength Rm
Brinell hardness HB
Machining group *
Material group
P6001 P6003
WPP45C WMP35
N/mm2
C ≤ 0.25% Annealed 125 430 P1 120 7 EO 120 7 EO

C > 0.25% to ≤ 0.55% Annealed 190 640 P2 120 7 EO 120 7 EO
C > 0.25% to ≤ 0.55% Heat-treated 210 710 P3 120 7 EO 120 7 EO
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 110 6 EO 110 6 EO
C > 0.55% Heat-treated 300 1010 P5 90 7 EO 90 7 EO
Free cutting steel (short-chipping) Annealed 220 750 P6 120 7 EO 120 7 EO
Annealed 175 590 P7 120 7 EO 120 7 EO
P Low-alloyed steel
Heat-treated 285 960 P8 71 7 EO 71 7 EO
Heat-treated 380 1280 P9 32 3 OE 32 3 OE
Annealed 200 680 P11 90 6 EO 90 6 EO
Hardened and tempered 300 1010 P12 90 7 EO 90 7 EO
Ferritic/martensitic, annealed 200 680 P14 100 7 EO 100 7 EO
Stainless steel
Martensitic, heat-treated 330 1110 P15 80 7 EO 80 7 EO
Austenitic, quench hardened 200 680 M1 71 4 EO
M Stainless steel Austenitic precipitation hardened (PH) 300 1010 M2

Solid drilling
B1
140˚ 140˚
Drill inserts
P6001, P6003, P6004, P6005 P6001 d1 P6005 d1
P6003
P6004
For Xtra·tec® Point Drill Dc Dc
s s
Drill inserts
P6001 P6003 P6003 P6005 P6004 P6003
cutting edges
Number of
P P M K N S
Dc
HC HC HC HC HC
Dc inches/ d1 s
P6001 P60..-D12,00R 2 12 3 3,6 b c b c b b
P60..-D12,10R 2 12,1 3 3,6 b c b c b
P60..-D12,20R 2 12,2 3 3,6 b c b c b
P60..-D12,30R 2 12,3 3 3,6 b c b c b
P60..-D12,40R 2 12,4 3 3,6 b c b c b
P60..-D12,50R 2 12,5 3 3,6 b c b c b b
P6003 P60..-D12,60R 2 12,6 3 3,6 b c b c b
P60..-D12,70R 2 12,7 1/2“ 3 3,6 b c b c b
P60..-D12,80R 2 12,8 3 3,6 b c b c b
P60..-D12,90R 2 12,9 3 3,6 b c b c b
P60..-D12,95R 2 12,95 3 3,6 b c b c b
P60..-D13,00R 2 13 3 3,6 b c b c b b
P6004 P60..-D13,10R 2 13,1 3 3,6 c
P60..-D13,11R 2 13,11 3 3,6 b c b c b
P60..-D13,20R 2 13,2 3 3,6 b c b c b
P60..-D13,25R 2 13,25 3 3,6 b c b c b
P60..-D13,30R 2 13,3 3 3,6 b c b c b
P60..-D13,40R 2 13,4 3 3,6 b c b c b
P6005
P60..-D13,49R 2 13,49 3 3,6 c
P60..-D13,50R 2 13,5 3 3,6 b c b c b b
P60..-D13,60R 2 13,6 3 3,6 b c b c b
P60..-D13,70R 2 13,7 3 3,6 b c b c b
P60..-D13,80R 2 13,8 3 3,6 b c b c b
P60..-D13,89R 2 13,89 35/64“ 3 3,6 b c b c b
P60..-D13,90R 2 13,9 3 3,6 c
P60..-D14,00R 2 14 3 4 b c b c b b
P60..-D14,10R 2 14,1 3 4 b c b c b
P60..-D14,20R 2 14,2 3 4 b c b c b
P60..-D14,29R 2 14,29 3 4 c
P60..-D14,30R 2 14,3 3 4 b c b c b
P60..-D14,40R 2 14,4 3 4 b c b c b
P60..-D14,50R 2 14,5 3 4 b c b c b b
P60..-D14,60R 2 14,6 3 4 b c b c b
P60..-D14,68R 2 14,68 3 4 b c b c b
P60..-D14,70R 2 14,7 3 4 c
P60..-D14,80R 2 14,8 3 4 b c b c b b
P60..-D14,90R 2 14,9 3 4 b c b c b
P60..-D15,00R 2 15 3 4 b c b c b b
P60..-D15,08R 2 15,08 3 4 c
P60..-D15,09R 2 15,09 3 4 b c b c b
P60..-D15,10R 2 15,1 3 4 c
P60..-D15,20R 2 15,2 3 4 b c b c b
P60..-D15,30R 2 15,3 3 4 b c b c b
Ordering example: P60.. -D13.00R is available as HC = Coated carbide
P6003 in the WMP35 grade (ISO P, ISO M and ISO S): P6003-D13.00R WMP35 or as
P6001 in the WPP45C grade (ISO P): P6001-D13.00R WPP45C
B 444 B 456
B 180 Indexable inserts for drilling and reaming

Solid drilling
B1
140˚ 140˚
Drill inserts
P6001, P6003, P6004, P6005 P6001 d1 P6005 d1
P6003
P6004
s s
Drill inserts
P6001 P6003 P6003 P6005 P6004 P6003
cutting edges
Number of
P P M K N S
Dc
HC HC HC HC HC
Dc inches/ d1 s
P6001 P60..-D15,40R 2 15,4 3 4 b c b c b
P60..-D15,47R 2 15,47 3 4 b c b c b
P60..-D15,48R 2 15,48 3 4 c
P60..-D15,50R 2 15,5 3 4 b c b c b b
P60..-D15,60R 2 15,6 3 4 b c b c b
P60..-D15,70R 2 15,7 3 4 b c b c b
P6003 P60..-D15,80R 2 15,8 3 4 b c b c b
P60..-D15,87R 2 15,87 3 4 b c b c b
P60..-D15,88R 2 15,88 3 4 c
P60..-D15,90R 2 15,9 3 4 c
P60..-D16,00R 2 16 4 4,5 b c b c b b
P60..-D16,13R 2 16,13 4 4,5 b c b c b
P6004 P60..-D16,26R 2 16,26 4 4,5 b c b c b
P60..-D16,27R 2 16,27 4 4,5 c
P60..-D16,43R 2 16,43 4 4,5 b c b c b
P60..-D16,50R 2 16,5 4 4,5 b c b c b b
P60..-D16,66R 2 16,66 4 4,5 b c b c b b
P60..-D16,67R 2 16,67 4 4,5 c
P6005
P60..-D16,70R 2 16,7 4 4,5 b c b c b
P60..-D16,80R 2 16,8 4 4,5 c
P60..-D17,00R 2 17 4 4,5 b c b c b b
P60..-D17,07R 2 17,07 4 4,5 b c b c b
P60..-D17,20R 2 17,2 4 4,5 b c b c b
P60..-D17,45R 2 17,45 4 4,5 b c b c b
P60..-D17,46R 2 17,46 4 4,5 c
P60..-D17,50R 2 17,5 4 4,5 b c b c b b
P60..-D17,70R 2 17,7 4 4,5 b c b c b b
P60..-D17,80R 2 17,8 4 4,5 c
P60..-D17,86R 2 17,86 45/64“ 4 4,5 b c b c b
P60..-D18,00R 2 18 4 5 b c b c b b
P60..-D18,24R 2 18,24 4 5 b c b c b
P60..-D18,26R 2 18,26 4 5 c
P60..-D18,50R 2 18,5 4 5 b c b c b b
P60..-D18,65R 2 18,65 4 5 b c b c b b
P60..-D18,70R 2 18,7 4 5 b c b c b
P60..-D18,80R 2 18,8 4 5 b c b c b
P60..-D19,00R 2 19 4 5 b c b c b b
P60..-D19,05R 2 19,05 3/4“ 4 5 b c b c b
P60..-D19,20R 2 19,2 4 5 b c b c b
rt for
dexable inse
Optimum in
Poor
Average
Good
nditions
m achining co
B 444 B 456
Indexable inserts for drilling and reaming B 181

Solid drilling
B1
140˚ 140˚
Drill inserts
P6001, P6003, P6004, P6005 P6001 d1 P6005 d1
P6003
P6004
s s
Drill inserts
P6001 P6003 P6003 P6005 P6004 P6003
cutting edges
Number of
P P M K N S
Dc
HC HC HC HC HC
Dc inches/ d1 s
P6001 P60..-D19,25R 2 19,25 4 5 b c b c b
P60..-D19,30R 2 19,3 4 5 b c b c b
P60..-D19,43R 2 19,43 4 5 b c b c b
P60..-D19,45R 2 19,45 4 5 c
P60..-D19,50R 2 19,5 4 5 b c b c b b
P60..-D19,60R 2 19,6 4 5 b c b c b
P6003 P60..-D19,70R 2 19,7 4 5 b c b c b b
P60..-D19,80R 2 19,8 4 5 c
P60..-D19,84R 2 19,84 4 5 b c b c b b
P60..-D20,00R 2 20 5 5,5 b c b c b b
P60..-D20,20R 2 20,2 5 5,5 b c b c b
P60..-D20,24R 2 20,24 51/64“ 5 5,5 b c b c b
P6004 P60..-D20,50R 2 20,5 5 5,5 b c b c b b
P60..-D20,62R 2 20,62 5 5,5 b c b c b
P60..-D20,64R 2 20,64 5 5,5 c
P60..-D20,70R 2 20,7 5 5,5 b c b c b
P60..-D21,00R 2 21 5 5,5 b c b c b b
P60..-D21,41R 2 21,41 5 5,5 b c b c b
P6005
P60..-D21,43R 2 21,43 5 5,5 c
P60..-D21,50R 2 21,5 5 5,5 b c b c b b
P60..-D21,70R 2 21,7 5 5,5 b c b c b b
P60..-D21,83R 2 21,83 5 5,5 b c b c b
P60..-D22,00R 2 22 5 6 b c b c b b
P60..-D22,22R 2 22,22 5 6 b c b c b
P60..-D22,23R 2 22,23 5 6 c
P60..-D22,42R 2 22,42 5 6 b c b c b
P60..-D22,47R 2 22,47 5 6 b c b c b
P60..-D22,50R 2 22,5 5 6 b c b c b b
P60..-D22,62R 2 22,62 5 6 b c b c b
P60..-D22,70R 2 22,7 5 6 b c b c b
P60..-D22,77R 2 22,77 5 6 b c b c b
P60..-D23,00R 2 23 5 6 b c b c b b
P60..-D23,02R 2 23,02 5 6 c
P60..-D23,39R 2 23,39 5 6 b c b c b
P60..-D23,50R 2 23,5 5 6 b c b c b b
P60..-D23,70R 2 23,7 5 6 b c b c b
P60..-D23,80R 2 23,8 5 6 b c b c b
P60..-D23,81R 2 23,81 5 6 c
P60..-D24,00R 2 24 5 6,5 b c b c b b
P60..-D24,21R 2 24,21 61/64“ 5 6,5 b c b c b
P60..-D24,50R 2 24,5 5 6,5 b c b c b b
P60..-D24,59R 2 24,59 5 6,5 b c b c b
P60..-D24,61R 2 24,61 5 6,5 c
B 444 B 456

Solid drilling
B1
140˚ 140˚
Drill inserts
P6001, P6003, P6004, P6005 P6001 d1 P6005 d1
P6003
P6004
s s
Drill inserts
P6001 P6003 P6003 P6005 P6004 P6003
cutting edges
Number of
P P M K N S
Dc
HC HC HC HC HC
Dc inches/ d1 s
P6001 P60..-D24,70R 2 24,7 5 6,5 b c b c b
P60..-D25,00R 2 25 5 6,5 b c b c b b
P60..-D25,25R 2 25,25 5 6,5 b c b c b
P60..-D25,40R 2 25,4 1“ 5 6,5 b c b c b
P60..-D25,50R 2 25,5 5 6,5 b c b c b b
P60..-D25,65R 2 25,65 5 6,5 b c b c b
P6003 P60..-D25,70R 2 25,7 5 6,5 b c b c b
P60..-D25,80R 2 25,8 5 6,5 b c b c b
P60..-D26,00R 2 26 6 7,1 b c b c b b
P60..-D26,25R 2 26,25 6 7,1 b c b c b
P60..-D26,50R 2 26,5 6 7,1 b c b c b b
P60..-D26,59R 2 26,59 1 3/64“ 6 7,1 b c b c b
P6004 P60..-D27,00R 2 27 6 7,1 b c b c b b
P60..-D27,38R 2 27,38 6 7,1 b c b c b
P60..-D27,50R 2 27,5 6 7,1 b c b c b b
P60..-D27,78R 2 27,78 6 7,1 b c b c b
P60..-D28,00R 2 28 6 7,7 b c b c b b
P60..-D28,17R 2 28,17 6 7,7 b c b c b
P6005
P60..-D28,50R 2 28,5 6 7,7 b c b c b b
P60..-D28,57R 2 28,57 6 7,7 b c b c b
P60..-D29,00R 2 29 6 7,7 b c b c b b
P60..-D29,37R 2 29,37 6 7,7 b c b c b
P60..-D29,50R 2 29,5 6 7,7 b c b c b b
P60..-D29,77R 2 29,77 6 7,7 b c b c b
P60..-D30,00R 2 30 6 8 b c b c b b
P60..-D30,15R 2 30,15 6 8 b c b c b
P60..-D30,50R 2 30,5 6 8 b c b c b b
P60..-D31,00R 2 31 6 8 b c b c b b
P60..-D31,50R 2 31,5 6 8 b c b c b b
P60..-D31,75R 2 31,75 1 1/4“ 6 8 b c b c b
P60..-D31,99R 2 31,99 6 8 b c b c b
P60..-D32,00R 2 32 6 8,3 b c b c b
P60..-D32,10R 2 32,1 6 8,3 b c b c b
P60..-D33,00R 2 33 6 8,3 b c b c b
P60..-D34,00R 2 34 6 8,6 b c b c b
P60..-D35,00R 2 35 6 8,6 b c b c b
P60..-D36,00R 2 36 6 8,9 b c b c b
P60..-D37,00R 2 37 6 8,9 b c b c b
P60..-D37,99R 2 37,99 6 8,9 b c b c b
rt for
dexable inse
Optimum in
Poor
Average
Good
nditions
m achining co
B 444 B 456

Solid drilling
B1
60˚
TCMT / TCMW d
l s
Indexable inserts
P M K S
HC HC HC HC
WSM20S
WSM20S
WSM30S
WSM30S
WMP20S
WMP20S
WSM10S
WSM10S
WKK20S
WPP20S
WPP30S
WKK10S
WPP10S
WSM20
WSM20
WSM30
WSM30
WSM10
WSM10
WPP01
l r
Designation mm mm
TCMT110208-MK4 10,74 0,8 ab
TCMT16T308-MK4 16,50 0,8 ab
TCMT110208-MM4 10,74 0,8 ab ab

TCMT16T308-MM4 16,50 0,8 bbab ab
TCMT110208-MP4 10,74 0,8 ab

TCMT16T308-MP4 16,50 0,8 ab
TCMT110208-PF4 10,74 0,8 abc abc

TCMT16T308-PF4 16,50 0,8 a abc abc
TCMT110208-PM5 10,74 0,8 bc bc

TCMT16T308-PM5 16,50 0,8 abc abc
TCMT16T312-PM5 16,50 1,2 bc bc
TCMT110208-PS5 10,74 0,8 bc bc
TCMT16T308-PS5 16,50 0,8 bc bc
TCMT110208-RK4 10,74 0,8 ab

TCMT16T308-RK4 16,50 0,8 ab
TCMT16T312-RK4 16,50 1,2 ab
TCMT110208-RM4 10,74 0,8 bb bc bc

TCMT16T308-RM4 16,50 0,8 bbabc abc
TCMT110208-RP4 10,74 0,8 abc

TCMT16T308-RP4 16,50 0,8 abc
TCMT16T312-RP4 16,50 1,2 abc
TCMW110208-RK6 10,74 0,8 ab

TCMW16T308-RK6 16,50 0,8 ab

Solid drilling
B1
Square r
α α
P484.
є
s l
є
s
Indexable inserts
P M K N S
cutting edges
HC HC HC HC HC
Number of
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
l s r
Designation mm mm mm α ε
P4840P-1R-A57 4 4,55 1,96 0,29 11° 90° bcc c bc c
P4840P-2R-A57 4 5,52 2,28 0,34 11° 90° bcc c bc c
P4840P-3R-A57 4 6,5 2,8 0,4 11° 90° bcc c bc c
P4840P-4R-A57 4 7,8 3,36 0,48 11° 90° bcc c bc c
P4840P-5R-A57 4 9,56 4,12 0,59 11° 90° bcc c bc c
P4840P-6R-A57 4 11,75 4,87 0,7 11° 90° bcc c bc c
P4840P-7R-A57 4 14,03 5,53 0,8 11° 90° bcc c bc c
P4840P-8R-A57 4 16,5 5,53 1 11° 90° bcc c bc c
P4840P-1R-E57 4 4,55 1,96 0,29 11° 90° abc c bc c
P4840P-2R-E57 4 5,52 2,28 0,34 11° 90° abc c bc c
P4840P-3R-E57 4 6,5 2,8 0,4 11° 90° abc c bc c
P4840P-4R-E57 4 7,8 3,36 0,48 11° 90° abc c bc c
P4840P-5R-E57 4 9,56 4,12 0,59 11° 90° abc c bc c
P4840P-6R-E57 4 11,75 4,87 0,7 11° 90° abc c bc c
P4840P-7R-E57 4 14,03 5,53 0,8 11° 90° abc c bc c
P4840P-8R-E57 4 16,5 5,53 1 11° 90° abc c bc c
P4840P-1R-E67 4 4,55 1,96 0,29 11° 90° abc c bc b c
P4840P-2R-E67 4 5,52 2,28 0,34 11° 90° abc c bc b c
P4840P-3R-E67 4 6,5 2,8 0,4 11° 90° abc c bc b c
P4840P-4R-E67 4 7,8 3,36 0,48 11° 90° abc c bc b c
P4840P-5R-E67 4 9,56 4,12 0,59 11° 90° abc c bc b c
P4840P-6R-E67 4 11,75 4,87 0,7 11° 90° abc c bc b c
P4840P-7R-E67 4 14,03 5,53 0,8 11° 90° abc c bc b c
P4840P-8R-E67 4 16,5 5,53 1 11° 90° abc c bc b c
P4841P-1R-A57 4 4,55 1,96 0,29 11° 90° bcc c bc c
P4841P-2R-A57 4 5,52 2,28 0,34 11° 90° bcc c bc c
P4841P-3R-A57 4 6,5 2,8 0,4 11° 90° bcc c bc c
P4841P-4R-A57 4 7,8 3,36 0,48 11° 90° bcc c bc c
P4841P-5R-A57 4 9,56 4,12 0,59 11° 90° bcc c bc c
P4841P-6R-A57 4 11,75 4,87 0,7 11° 90° bcc c bc c
P4841P-7R-A57 4 14,03 5,53 0,8 11° 90° bcc c bc c
P4841P-8R-A57 4 16,5 5,53 1 11° 90° bcc c bc c
P4841P-1R-E57 4 4,55 1,96 0,29 11° 90° abc c bc c
P4841P-2R-E57 4 5,52 2,28 0,34 11° 90° abc c bc c
P4841P-3R-E57 4 6,5 2,8 0,4 11° 90° abc c bc c
P4841P-4R-E57 4 7,8 3,36 0,48 11° 90° abc c bc c
P4841P-5R-E57 4 9,56 4,12 0,59 11° 90° abc c bc c
P4841P-6R-E57 4 11,75 4,87 0,7 11° 90° abc c bc c
P4841P-7R-E57 4 14,03 5,53 0,8 11° 90° abc c bc c
P4841P-8R-E57 4 16,5 5,53 1 11° 90° abc c bc c
HC = Coated carbide
B 450 B 456

Solid drilling
B1
Square r
α α
P484.
є
s l
є
s
Indexable inserts
P M K N S
cutting edges
HC HC HC HC HC
Number of
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
l s r
Designation mm mm mm α ε
P4841C-1R-A57 4 4,9 1,96 0,29 11° 90° b c c cc c
P4841C-2R-A57 4 5,95 2,38 0,34 11° 90° b c c cc c
P4841C-3R-A57 4 7 2,8 0,4 11° 90° b c c cc c
P4841C-4R-A57 4 8,4 3,36 0,48 11° 90° b c c cc c
P4841C-5R-A57 4 10,29 4,12 0,59 11° 90° b c c cc c
P4841C-6R-A57 4 12,24 4,87 0,7 11° 90° b c c cc c
P4841C-7R-A57 4 14,69 5,53 0,8 11° 90° b c c cc c
P4841C-8R-A57 4 17,49 5,53 1 11° 90° b c c cc c
P4841C-1R-E57 4 4,9 1,96 0,29 11° 90° b c c bc c
P4841C-2R-E57 4 5,95 2,38 0,34 11° 90° b c c bc c
P4841C-3R-E57 4 7 2,8 0,4 11° 90° b c c bc c
P4841C-4R-E57 4 8,4 3,36 0,48 11° 90° b c c bc c
P4841C-5R-E57 4 10,29 4,12 0,59 11° 90° b c c bc c
P4841C-6R-E57 4 12,24 4,87 0,7 11° 90° b c c bc c
P4841C-7R-E57 4 14,69 5,53 0,8 11° 90° b c c bc c
P4841C-8R-E57 4 17,49 5,53 1 11° 90° b c c bc c
P4840C-1R-E67 4 4,9 1,96 0,29 11° 90° a c c ac b c
P4840C-2R-E67 4 5,95 2,38 0,34 11° 90° a c c ac b c
P4840C-3R-E67 4 7 2,8 0,4 11° 90° a c c ac b c
P4840C-4R-E67 4 8,4 3,36 0,48 11° 90° a c c ac b c
P4840C-5R-E67 4 10,29 4,12 0,59 11° 90° a c c ac b c
P4840C-6R-E67 4 12,24 4,87 0,7 11° 90° a c c ac b c
P4840C-7R-E67 4 14,69 5,53 0,8 11° 90° a c c ac b c
P4840C-8R-E67 4 17,49 5,53 1 11° 90° a c c ac b c
HC = Coated carbide
B 450 B 456

Solid drilling
B1
Square α α
P284.
є є
l s l s
Indexable inserts
P M K S
cutting edges
HC HC HC HC
Number of
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l s
Designation mm mm α ε
P2840S-1N-A57 4 6,35 2,38 14° 90° bc cc c bcc c
P2840S-2N-A57 4 7,8 3,18 14° 90° bc cc c bcc c
P2840S-3N-A57 4 9,52 3,97 11° 96° bc cc c bcc c
P2840S-4N-A57 4 11 3,97 11° 96° bc cc c bcc c
P2840S-5N-A57 4 12,7 4,76 11° 96° bc cc c bcc c
P2840S-1N-E67 4 6,35 2,38 14° 90° c cc cc cc cc
P2840S-2N-E67 4 7,8 3,18 14° 90° c cc cc cc cc
P2840S-3N-E67 4 9,52 3,97 11° 96° c cc cc cc cc
P2840S-4N-E67 4 11 3,97 11° 96° c cc cc cc cc
P2840S-5N-E67 4 12,7 4,76 11° 96° c cc cc cc cc
P2841S-1N-A57 4 6,35 2,38 14° 90° ab c bc
P2841S-2N-A57 4 7,8 3,18 14° 90° ab c bc
P2841S-3N-A57 4 9,52 3,97 11° 96° ab c bc
P2841S-4N-A57 4 11 3,97 11° 96° ab c bc
P2841S-5N-A57 4 12,7 4,76 11° 96° ab c bc
P2841S-1N-E57 4 6,35 2,38 14° 90° ab c c bc c
P2841S-2N-E57 4 7,8 3,18 14° 90° ab c c bc c
P2841S-3N-E57 4 9,52 3,97 11° 96° ab c c bc c
P2841S-4N-E57 4 11 3,97 11° 96° ab c c bc c
P2841S-5N-E57 4 12,7 4,76 11° 96° ab c c bc c
P2841S-1N-E67 4 6,35 2,38 14° 90° b c c c c
P2841S-2N-E67 4 7,8 3,18 14° 90° b c c c c
P2841S-3N-E67 4 9,52 3,97 11° 96° b c c c c
P2841S-4N-E67 4 11 3,97 11° 96° b c c c c
P2841S-5N-E67 4 12,7 4,76 11° 96° b c c c c
HC = Coated carbide
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
machining cond
B 456

Solid drilling
B1
Rectangular b α
LCMX l
є
l2 s
Indexable inserts
P M K N S
cutting edges
HC HC HC HC HC
Number of
WSP45S
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l l2 s b
Designation mm mm mm α mm ε
LCMX050203-B57 2 4 5,2 2,38 7° 0,6 90° ab c c bbc c
LCMX06T204-B57 2 5,2 6,6 2,78 7° 0,8 90° ab c c bbc c
LCMX050203-D57 2 4 5,2 2,38 7° 0,6 90° ab cc cc bcc cc

LCMX06T204-D57 2 5,2 6,6 2,78 7° 0,8 90° ab cc cc bcc cc
LCMX050203-E57 2 4 5,2 2,38 7° 0,6 90° ab cc cc bcca cc

LCMX06T204-E57 2 5,2 6,6 2,78 7° 0,8 90° ab cc cc bcca cc
HC = Coated carbide
B 452 B 456

Solid drilling
B1
r
Trigon indexable inserts
WOMX / WOEX d
®
Tiger·tec Silver 84˚ l
8˚
s
Indexable inserts
P M K S
cutting edges
HC HC HC HC
Number of
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l s r d
WOMX030204-B57 3 3,31 2,3 0,4 5 b c
WOMX040304-B57 3 4,2 3,18 0,4 6,35 b c
WOMX05T304-B57 3 5,29 3,8 0,4 8 b c
WOMX06T304-B57 3 6,62 3,8 0,4 10 b c
WOMX080408-B57 3 7,94 4,8 0,8 12 b c
WOMX100508-B57 3 9,92 5,3 0,8 15 b c
WOMX120608-B57 3 11,64 6 0,8 17,5 b c
WOMX030204-D57 3 3,31 2,3 0,4 5 b c c cc c
WOMX040304-D57 3 4,2 3,18 0,4 6,35 b c c cc c
WOMX05T304-D57 3 5,29 3,8 0,4 8 b c ca cc c
WOMX06T304-D57 3 6,62 3,8 0,4 10 ab c cabcc c
WOMX080408-D57 3 7,94 4,8 0,8 12 ab c cabcc c
WOMX100508-D57 3 9,92 5,3 0,8 15 ab c cabcc c
WOMX120608-D57 3 11,64 6 0,8 17,5 ab c cabcc c
WOEX030204-E57 3 3,31 2,3 0,4 5 b b
WOEX040304-E57 3 4,2 3,18 0,4 6,35 ab bb
WOEX05T304-E57 3 5,29 3,8 0,4 8 ab bb
WOEX06T304-E57 3 6,62 3,8 0,4 10 ab abb
WOEX080408-E57 3 7,94 4,8 0,8 12 ab bb
WOEX100508-E57 3 9,92 5,3 0,8 15 b b
WOEX120608-E57 3 11,64 6 0,8 17,5 b b
HC = Coated carbide
rt for
dexable inse
Optimum in
Poor
Average
Good s
iti on
machining cond
B 454 B 456

Solid drilling
B1
1,3
Positive basic shape 0,7
l2
P6500 30˚
3˚
l1 s
Indexable inserts for reaming
P M K N S H O
cutting edges
HC HC HC HC HC HC HC
Number of
WXK05
WXK05
WXK05
WXK05
WXP40
WXP15
WXP15
WCE10
WK10
WK10
l1 l2 s Rake
Designation mm mm mm angle Chamfer
P6500-00R-A88-E1 1 11 1,5 1 0° E1 a a
P6500-0R-A88-E1 2 20 2,5 1,2 0° E1 a a
P6500-1R-A88-E1 2 20 3 1,5 0° E1 a a
P6500-2R-A88-E1 2 20 4,5 4,5 0° E1 a a
P6500-4R-A88-E1 2 70 7 2,3 0° E1 a a
P6500-00R-B88-E1 1 11 1,5 1 6° E1 aaa aaaaa
P6500-0R-B88-E1 2 20 2,5 1,2 6° E1 aaa aaaaa
P6500-1R-B88-E1 2 20 3 1,5 6° E1 aaa aaaaa
P6500-2R-B88-E1 2 20 4,5 4,5 6° E1 aaa aaaaa
P6500-4R-B88-E1 2 70 7 2,3 6° E1 aaa aaaaa
P6500-00R-B88-E5 1 11 1,5 1 6° E5 a a aa
P6500-0R-B88-E5 2 20 2,5 1,2 6° E5 a a aa
P6500-1R-B88-E5 2 20 3 1,5 6° E5 a a aa
P6500-2R-B88-E5 2 20 4,5 4,5 6° E5 a a aa
P6500-4R-B88-E5 2 70 7 2,3 6° E5 a a aa
HC = Coated carbide

B 191
Solid drilling
B1

Indexable insert drills
Drilling depth 2,5 × Dc 1,3 × Dc 3 × Dc 5 × Dc 7 × Dc 10 × Dc
Designation B4012C B4011 B4013 B4015 B4017 B4010

Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec®
Dia. range [mm] 12–29.99 12–25.99 12–37.99 12–37.99 12–37.99 18–24.99
Page B 198 B 200 B 202 B 204 B 208 B 212
Designation B4212 B4213 B4213.C B4213.N B4214 B4215

Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec®
Dia. range [mm] 13,5–59 13,5–59 16–45 65–80 17–59 17–59
Page B 214 B 220 B 226 B 228 B 230 B 236
Designation B3212 B3213 B3214

Dia. range [mm] 10–18 10–18 10–18
Page B 242 B 244 B 246
B 192 Drilling tools with indexable inserts

Solid drilling
B1
Designation key for solid drilling
B421 2 . F25 . 24 . Z1 . A57 R – 3

1 2 3 4 5 6 7 8
1 2 3 4
Walter indexable insert Drilling depth
Shank variant and diameter Nominal diameter [mm]
designation (L/D ratio)
Walter Capto™
B421 Xtra·tec® Insert Drill 2 × Dc C ISO 26623
Combi-shank
B401 Xtra·tec® Point Drill 3 × Dc DF DIN 1835 B and DIN 6535 HE
Parallel shank
B321 Stardrill 4 × Dc F with clamping flat
5 × Dc N NCT
T ScrewFit
UF Inch
Parallel shank
Z without clamping flat
5 6 7 8
Effective number of teeth Drilling depth [mm] Cutting direction Insert size
R RH-cutting only Xtra·tec® Insert Drill
Drilling tools with indexable inserts B 193

Solid drilling
B1
Walter Select
Drilling depth 2,5 × Dc 1,3 × Dc 3 × Dc 5 × Dc 7 × Dc
Designation B4012C B4011 B4013 B4015 B4017

Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec®
Dia. range [mm] 12–29.99 12–25.99 12–37.99 12–37.99 12–37.99
Page B 198 B 200 B 202 B 204 B 208
M Stainless steel CC CC CC CC C
K Cast iron CC CC CC CC CC
N NF metals CC CC CC CC CC
S Materials with difficult cutting properties CC CC CC C C
H Hard materials
O Other
Indexable inserts
Type P600 . -D12, .. P600 . -D12, .. P600 . -D12, .. P600 . -D12, .. P600 . -D12, ..
TC .. 11020 .. P600 . -D13, .. P600 . -D13, .. P600 . -D13, .. P600 . -D13, ..
P600 . -D14, .. P600 . -D14, .. P600 . -D14, .. P600 . -D14, .. P600 . -D14, ..
P600 . -D15, .. P600 . -D15, .. P600 . -D15, .. P600 . -D15, .. P600 . -D15, ..
... ... ... ... ...

Solid drilling
B1
10 × Dc 2 × Dc 3 × Dc 4 × Dc 5 × Dc
B4010 B4212 B4213 B4213.C B4213.N B4214 B4215

Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec® Xtra·tec®
18–24.99 13,5–59 13,5–59 16–45 65–80 17–59 17–59
B 212 B 214 B 220 B 226 B 228 B 230 B 236
C CC CC CC CC C
CC C C C C C C
C CC CC CC CC C
P600 . -D18, .. P484 . P-1R- .. P484 . P-1R- .. P484 . P-1R- .. P484 . P-5R- .. P484 . P-2R- .. P484 . P-2R- ..
P600 . -D20, .. P484 . C-1R- .. P484 . C-1R- .. P484 . C-1R- .. P484 . C-5R- .. P484 . C-2R- .. P484 . C-2R- ..
P600 . -D22, .. P484 . P-2R- .. P484 . P-2R- .. P484 . P-2R- .. P484 . P-6R- .. P484 . P-3R- .. P484 . P-3R- ..
P600 . -D24, .. P484 . C-2R- .. P484 . C-2R- .. P484 . C-2R- .. P484 . C-6R- .. P484 . C-3R- .. P484 . C-3R- ..
... ... ... ... ...
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Designation B3212 B3213 B3214
Dia. range [mm] 10–18 10–18 10–18
Page B 242 B 244 B 246
P Steel CC CC
M Stainless steel CC CC
K Cast iron CC CC CC
N NF metals C C C
S Materials with difficult cutting properties CC CC
H Hard materials
O Other
Indexable inserts
Type LCMX050203- .. LCMX050203- .. LCMX050203- ..

LCMX06T204- .. LCMX06T204- .. LCMX06T204- ..

B 197
Solid drilling
B1
Chamfer drills
B4012C
Xtra·tec®
Dc
12– 2,5×Dc Z =2
29,99 90° 140°
P M K N S H O
B4012C CC CC CC CC CC
No. of
Tool Dc D1 Lc l4 l5 d1 d4 indexable
Designation mm mm mm mm mm mm mm inserts Type
Parallel shank with flat 1 P600 . -D12, ..
B4012C.F20.12,0.Z02.35R 12 23,7 35,2 68 50 20 30 0,21
2 TC .. 11020 ..
1 P600 . -D14, ..
D1 Dc d1 d4 B4012C.F20.14,0.Z02.40R 14 25,7 40,6 76 50 20 30 0,23
2 TC .. 11020 ..
Lc 1 P600 . -D15, ..
B4012C.F20.15,0.Z02.44R 15 26,7 46,7 80 50 20 30 0,25
l4 l5 2 TC .. 11020 ..
1 P600 . -D17, ..
B4012C.F20.17,0.Z02.48R 17 28,7 48,6 88 50 20 30 0,28
2 TC .. 11020 ..
1 P600 . -D19, ..
B4012C.F20.19,0.Z02.52R 19 30,7 52,5 96 50 20 30 0,31
2 TC .. 11020 ..
Parallel shank with flat 1 P600 . -D21, ..
B4012C.F20.21,0.Z02.55R 21 32,7 55,3 104 50 20 30 0,34
2 TC .. 11020 ..
d4
1 P600 . -D24, ..
B4012C.F25.24,0.Z02.61R 24 43,4 61,4 117 56 25 35 0,6
D1 Dc d1 d2 2 TC .. 16T3 ..
1 P600 . -D26, ..
Lc
B4012C.F25.26,0.Z02.66R 26 45,4 66,7 125 56 25 35 0,65
2 TC .. 16T3 ..
l4 l5
1 P600 . -D29, ..
B4012C.F32.29,0.Z02.71R 29 48,4 72,3 138 60 32 42 1,05
2 TC .. 16T3 ..

Solid drilling
B1
Assembly
parts Dc [mm] 12 14–15 17 19 21 24 26 29
Clamping screw FS1396 FS1397 FS1398 FS1399 FS1400 FS1402 FS1403 FS1404
for P600. drill insert (Torx 7IP) (Torx 8IP) (Torx 8IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 25IP) (Torx 25IP)
Tightening torque 1,2 Nm 2,0 Nm 2,0 Nm 4,0 Nm 5,0 Nm 5,0 Nm 5,5 Nm 5,5 Nm
Clamping screw for TC.. FS2061 FS2061 FS2061 FS2061 FS2061 FS2063 FS2063 FS2063
chamfering insert (Torx 7IP) (Torx 7IP) (Torx 7IP) (Torx 7IP) (Torx 7IP) (Torx 15IP) (Torx 15IP) (Torx 15IP)
Tightening torque 0,9 Nm 0,9 Nm 0,9 Nm 0,9 Nm 0,9 Nm 3,0 Nm 3,0 Nm 3,0 Nm
Accessories
Dc [mm] 12 14–17 19 21–24 26–29
Torque T-handle FS2041

Tightening torque 4,5–14 Nm
Torque screwdriver, analogue FS2001 FS2003 FS2003 FS2003

Tightening torque 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Interchangeable blade FS2011 (Torx 7IP) FS2012 (Torx 8IP) FS2014 (Torx 15IP) FS2015 (Torx 20IP) FS2049 (Torx 25IP)
Screwdriver FS1483 (Torx 8IP) FS1485 (Torx 15IP) FS1486 (Torx 20IP) FS1487 (Torx 25IP)
Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–29,77 b
P6003-D.. 12–29,77 cb b
P6004-D.. 12–29,5 b
P6005-D.. 12–29,77 c
For TC .. chamfer inserts, see “Positive indexable inserts” HC = Coated carbide
rkpiece Primary
machine, wo
Stability of ar ra ng em ent application
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
Point Drills, 1.3 x Dc
B4011
Xtra·tec®
Dc
12– 1,3×Dc Z =2
25,99 140°
P M K N S H O
B4011 CC CC CC CC CC
No. of
Tool Dc Lc l4 d1 indexable
Designation mm mm mm mm inserts Type
ScrewFit B4011.T14.12,0.Z02.15R 12 18 47,6 T14 0,04 1 P600 . -D12, ..
B4011.T14.13,0.Z02.17R 13 19 49,9 T14 0,05 1 P600 . -D13, ..
Dc d1
B4011.T14.14,0.Z02.18R 14 21 52,2 T14 0,05 1 P600 . -D14, ..
Lc B4011.T18.15,0.Z02.19R 15 22 54,5 T18 0,08 1 P600 . -D15, ..
l4
B4011.T18.16,0.Z02.21R 16 24 56,8 T18 0,09 1 P600 . -D16, ..
B4011.T18.17,0.Z02.22R 17 25 59,1 T18 0,09 1 P600 . -D17, ..
B4011.T18.18,0.Z02.23R 18 27 61,4 T18 0,09 1 P600 . -D18, ..
B4011.T22.19,0.Z02.24R 19 28 63,7 T22 0,12 1 P600 . -D19, ..
B4011.T22.20,0.Z02.26R 20 30 66 T22 0,13 1 P600 . -D20, ..
B4011.T22.21,0.Z02.27R 21 31 68,3 T22 0,14 1 P600 . -D21, ..
B4011.T22.22,0.Z02.28R 22 33 71,6 T22 0,16 1 P600 . -D22, ..
B4011.T28.23,0.Z02.30R 23 34 73,9 T28 0,22 1 P600 . -D23, ..
B4011.T28.24,0.Z02.31R 24 36 76,2 T28 0,23 1 P600 . -D24, ..
B4011.T28.25,0.Z02.32R 25 37 78,5 T28 0,25 1 P600 . -D25, ..

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25
Clamping screw FS1396 FS1397 FS1398 FS1399 FS1400 FS1401 FS1402
for drill insert (Torx 7IP) (Torx 8IP) (Torx 8IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 20IP)
Accessories
Dc [mm] 12–13 14–17 18–19 20–25

Interchangeable blade FS2011 (Torx 7IP) FS2012 (Torx 8IP) FS2014 (Torx 15IP) FS2015 (Torx 20IP)
Screwdriver FS1483 (Torx 8IP) FS1485 (Torx 15IP) FS1486 (Torx 20IP)
Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–25,8 b
P6003-D.. 12–25,8 cb b
P6004-D.. 12–25,5 b
P6005-D.. 12–25,8 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
Point drills, 3 x Dc
B4013
Xtra·tec®
Dc
12– 3×Dc Z =2
37,99 140°
P M K N S H O
B4013 CC CC CC CC CC
No. of
Tool Dc Lc l4 l5 d1 d4 indexable
Designation mm mm mm mm mm mm inserts Type
Parallel shank with flat B4013.F20.12,0.Z02.36R 12 38 68 50 20 30 0,22 1 P600 . -D12, ..
d4 B4013.F20.13,0.Z02.39R 13 41 72 50 20 30 0,22 1 P600 . -D13, ..
B4013.F20.14,0.Z02.42R 14 45 76 50 20 30 0,22 1 P600 . -D14, ..
Dc d1
B4013.F20.15,0.Z02.45R 15 48 80 50 20 30 0,25 1 P600 . -D15, ..
Lc
l4 l5 B4013.F20.16,0.Z02.48R 16 51 84 50 20 30 0,25 1 P600 . -D16, ..
B4013.F20.17,0.Z02.51R 17 54 88 50 20 30 0,26 1 P600 . -D17, ..
B4013.F20.18,0.Z02.54R 18 57 92 50 20 30 0,28 1 P600 . -D18, ..
B4013.F20.19,0.Z02.57R 19 61 96 50 20 30 0,29 1 P600 . -D19, ..
B4013.F20.20,0.Z02.60R 20 64 100 50 20 30 0,31 1 P600 . -D20, ..
B4013.F20.21,0.Z02.63R 21 67 104 50 20 30 0,33 1 P600 . -D21, ..
B4013.F25.22,0.Z02.66R 22 70 109 56 25 35 0,48 1 P600 . -D22, ..
B4013.F25.23,0.Z02.69R 23 73 113 56 25 35 0,5 1 P600 . -D23, ..
B4013.F25.24,0.Z02.72R 24 76 117 56 25 35 0,52 1 P600 . -D24, ..
B4013.F25.25,0.Z02.75R 25 80 121 56 25 35 0,55 1 P600 . -D25, ..
B4013.F25.26,0.Z02.78R 26 83 125 56 25 35 0,58 1 P600 . -D26, ..
B4013.F25.27,0.Z02.81R 27 86 129 56 25 35 0,62 1 P600 . -D27, ..
B4013.F32.28,0.Z02.84R 28 89 134 60 32 42 0,85 1 P600 . -D28, ..
B4013.F32.29,0.Z02.87R 29 92 138 60 32 42 0,89 1 P600 . -D29, ..
B4013.F32.30,0.Z02.90R 30 95 142 60 32 42 0,95 1 P600 . -D30, ..
B4013.F32.31,0.Z02.93R 31 99 146 60 32 42 1 1 P600 . -D31, ..
B4013.F40.32,0.Z02.96R 32 102 150 70 40 50 1,28 1 P600 . -D32, ..
B4013.F40.33,0.Z02.99R 33 105 154 70 40 50 1,33 1 P600 . -D33,0 ..
B4013.F40.34,0.Z02.102R 34 108 158 70 40 50 1,38 1 P600 . -D34,0 ..
B4013.F40.35,0.Z02.105R 35 111 162 70 40 50 1,45 1 P600 . -D35,0 ..
B4013.F40.36,0.Z02.108R 36 115 166 70 40 50 1,48 1 P600 . -D36,0 ..
B4013.F40.37,0.Z02.111R 37 118 170 70 40 50 1,54 1 P600 . -D37, ..

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25 26–27 28–33 34–37
Clamping screw FS1396 FS1397 FS1398 FS1399 FS1400 FS1401 FS1402 FS1403 FS1404 FS2159
for drill insert (Torx 7IP) (Torx 8IP) (Torx 8IP) (Torx 15IP) (Torx 20IP) (Torx 20IP) (Torx 20IP) (Torx 25IP) (Torx 25IP) (Torx 25IP)
Tightening torque 1,2 Nm 2,0 Nm 2,0 Nm 4,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 5,5 Nm 5,5 Nm 5,5 Nm
Accessories
Dc [mm] 12–13 14–17 18–19 20–25 26–37


Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–37,99 b
P6003-D.. 12–37,99 cb b
P6004-D.. 12–31,5 b
P6005-D.. 12–37,99 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
Point Drills, 5 x Dc
B4015
Xtra·tec®
Dc
12– 5×Dc Z =2
37,99 140°
P M K N S H O
B4015 CC CC CC CC C
No. of
d4 B4015.F20.13,0.Z02.65R 13 67 98 50 20 30 0,25 1 P600 . -D13, ..
Dc d1
B4015.F20.14,0.Z02.70R 14 73 104 50 20 30 0,25 1 P600 . -D14, ..
B4015.F20.15,0.Z02.75R 15 78 110 50 20 30 0,26 1 P600 . -D15, ..
Lc
l4 l5 B4015.F20.16,0.Z02.80R 16 83 116 50 20 30 0,28 1 P600 . -D16, ..
B4015.F20.17,0.Z02.85R 17 88 122 50 20 30 0,26 1 P600 . -D17, ..
B4015.F20.18,0.Z02.90R 18 93 128 50 20 30 0,3 1 P600 . -D18, ..
B4015.F20.19,0.Z02.95R 19 98 134 50 20 30 0,32 1 P600 . -D19, ..
B4015.F20.20,0.Z02.100R 20 104 140 50 20 30 0,35 1 P600 . -D20, ..
B4015.F20.21,0.Z02.105R 21 109 146 50 20 30 0,38 1 P600 . -D21, ..
B4015.F25.22,0.Z02.110R 22 114 153 56 25 35 0,53 1 P600 . -D22, ..
B4015.F25.23,0.Z02.115R 23 119 159 56 25 35 0,57 1 P600 . -D23, ..
B4015.F25.24,0.Z02.120R 24 124 165 56 25 35 0,6 1 P600 . -D24, ..
B4015.F25.25,0.Z02.125R 25 130 171 56 25 35 0,65 1 P600 . -D25, ..
B4015.F25.26,0.Z02.130R 26 135 177 56 25 35 0,69 1 P600 . -D26, ..
B4015.F25.27,0.Z02.135R 27 140 183 56 25 35 0,69 1 P600 . -D27, ..
B4015.F32.28,0.Z02.140R 28 145 190 60 32 42 0,99 1 P600 . -D28, ..
B4015.F32.29,0.Z02.145R 29 150 196 60 32 42 1,05 1 P600 . -D29, ..
B4015.F32.30,0.Z02.150R 30 155 202 60 32 42 1,12 1 P600 . -D30, ..
B4015.F32.31,0.Z02.155R 31 161 208 60 32 42 1,2 1 P600 . -D31, ..
B4015.F40.32,0.Z02.160R 32 166 214 70 40 50 1,54 1 P600 . -D32, ..
B4015.F40.33,0.Z02.165R 33 171 220 70 40 50 1,6 1 P600 . -D33,0 ..
B4015.F40.34,0.Z02.170R 34 176 226 70 40 50 1,69 1 P600 . -D34,0 ..
B4015.F40.35,0.Z02.175R 35 181 232 70 40 50 1,78 1 P600 . -D35,0 ..
B4015.F40.36,0.Z02.180R 36 187 238 70 40 50 1,83 1 P600 . -D36,0 ..
B4015.F40.37,0.Z02.185R 37 192 244 70 40 50 1,92 1 P600 . -D37, ..

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25 26–27 28–33 34–35
Accessories
Dc [mm] 12–13 14–17 18–19 20–25 26–35


Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–37,99 b
P6003-D.. 12–37,99 cb b
P6004-D.. 12–31,5 b
P6005-D.. 12–37,99 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
Point Drills, 5 x Dc
B4015
Xtra·tec®
Dc
12– 5×Dc Z =2
31,99 140°
P M K N S H O
B4015 CC CC CC CC C
No. of
Full Cylindrical Shank B4015.ZB20.12,0.Z02.60R 12 62 92 50 20 30 0,22 1 P600 . -D12, ..
d4 B4015.ZB20.13,0.Z02.65R 13 67 98 50 20 30 0,24 1 P600 . -D13, ..
Dc d1
B4015.ZB20.14,0.Z02.70R 14 73 104 50 20 30 0,25 1 P600 . -D14, ..
B4015.ZB20.15,0.Z02.75R 15 78 110 50 20 30 0,27 1 P600 . -D15, ..
Lc
l4 l5 B4015.ZB20.16,0.Z02.80R 16 83 116 50 20 30 0,28 1 P600 . -D16, ..
B4015.ZB20.17,0.Z02.85R 17 88 122 50 20 30 0,30 1 P600 . -D17, ..
B4015.ZB20.18,0.Z02.90R 18 93 128 50 20 30 0,3 1 P600 . -D18, ..
B4015.ZB20.19,0.Z02.95R 19 98 134 50 20 30 0,33 1 P600 . -D19, ..
B4015.ZB20.20,0.Z02.100R 20 104 140 50 20 30 0,36 1 P600 . -D20, ..
B4015.ZB20.21,0.Z02.105R 21 109 146 50 20 30 0,39 1 P600 . -D21, ..
B4015.ZB25.22,0.Z02.110R 22 114 153 56 25 35 0,54 1 P600 . -D22, ..
B4015.ZB25.23,0.Z02.115R 23 119 159 56 25 35 0,58 1 P600 . -D23, ..
B4015.ZB25.24,0.Z02.120R 24 124 165 56 25 35 0,61 1 P600 . -D24, ..
B4015.ZB25.25,0.Z02.125R 25 130 171 56 25 35 0,65 1 P600 . -D25, ..
B4015.ZB25.26,0.Z02.130R 26 135 177 56 25 35 0,7 1 P600 . -D26, ..
B4015.ZB25.27,0.Z02.135R 27 140 183 56 25 35 0,75 1 P600 . -D27, ..
B4015.ZB32.28,0.Z02.140R 28 145 190 60 32 42 1 1 P600 . -D28, ..
B4015.ZB32.29,0.Z02.145R 29 150 196 60 32 42 1,06 1 P600 . -D29, ..
B4015.ZB32.30,0.Z02.150R 30 155 202 60 32 42 1,13 1 P600 . -D30, ..
B4015.ZB32.31,0.Z02.155R 31 161 208 60 32 42 1,2 1 P600 . -D31, ..

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25 26–27 28–33 34–35
Accessories
Dc [mm] 12–13 14–17 18–19 20–25 26–35


Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–31,99 b
P6003-D.. 12–31,99 cb b
P6004-D.. 12–31,5 b
P6005-D.. 12–31,99 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
B4017
Xtra·tec®
Dc
12– 7×Dc Z =2
37,99 140°
P M K N S H O
B4017 CC C CC CC C
No. of
d4 B4017.F20.13,0.Z02.91R 13 93 124 50 20 30 0,25 1 P600 . -D13, ..
Dc d1
B4017.F20.14,0.Z02.98R 14 101 132 50 20 30 0,27 1 P600 . -D14, ..
B4017.F20.15,0.Z02.105R 15 108 140 50 20 30 0,29 1 P600 . -D15, ..
Lc
l4 l5 B4017.F20.16,0.Z02.112R 16 115 148 50 20 30 0,31 1 P600 . -D16, ..
B4017.F20.17,0.Z02.119R 17 122 156 50 20 30 0,35 1 P600 . -D17, ..
B4017.F20.18,0.Z02.126R 18 126 164 50 20 30 0,34 1 P600 . -D18, ..
B4017.F20.19,0.Z02.133R 19 136 172 50 20 30 0,37 1 P600 . -D19, ..
B4017.F20.20,0.Z02.140R 20 144 180 50 20 30 0,41 1 P600 . -D20, ..
B4017.F20.21,0.Z02.147R 21 151 188 50 20 30 0,45 1 P600 . -D21, ..
B4017.F25.22,0.Z02.154R 22 158 197 56 25 35 0,62 1 P600 . -D22, ..
B4017.F25.23,0.Z02.161R 23 165 205 56 25 35 0,66 1 P600 . -D23, ..
B4017.F25.24,0.Z02.168R 24 172 213 56 25 35 0,71 1 P600 . -D24, ..
B4017.F25.25,0.Z02.175R 25 180 221 56 25 35 0,76 1 P600 . -D25, ..
B4017.F25.26,0.Z02.182R 26 187 229 56 25 35 0,82 1 P600 . -D26, ..
B4017.F25.27,0.Z02.189R 27 194 237 56 25 35 0,89 1 P600 . -D27, ..
B4017.F32.28,0.Z02.196R 28 201 246 60 32 42 1,16 1 P600 . -D28, ..
B4017.F32.29,0.Z02.203R 29 208 254 60 32 42 1,24 1 P600 . -D29, ..
B4017.F32.30,0.Z02.210R 30 215 262 60 32 42 1,24 1 P600 . -D30, ..
B4017.F32.31,0.Z02.217R 31 223 270 60 32 42 1,42 1 P600 . -D31, ..
B4017.F40.32,0.Z02.224R 32 230 278 70 40 50 1,73 1 P600 . -D32, ..
B4017.F40.33,0.Z02.231R 33 237 286 70 40 50 1,82 1 P600 . -D33,0 ..
B4017.F40.34,0.Z02.238R 34 244 294 70 40 50 1,94 1 P600 . -D34,0 ..
B4017.F40.35,0.Z02.245R 35 251 302 70 40 50 2,05 1 P600 . -D35,0 ..
B4017.F40.36,0.Z02.252R 36 259 310 70 40 50 2,14 1 P600 . -D36,0 ..
B4017.F40.37,0.Z02.259R 37 266 318 70 40 50 2,28 1 P600 . -D37, ..
Producing a pilot hole with a B 4013 or NC centre drill is recommended

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25 26–27 28–33 34–37
Accessories
Dc [mm] 12–13 14–17 18–19 20–25 26–37


Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–37,99 b
P6003-D.. 12–37,99 cb b
P6004-D.. 12–31,5 b
P6005-D.. 12–37,99 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
B4017
Xtra·tec®
Dc
12– 7×Dc Z =2
31,99 140°
P M K N S H O
B4017 CC C CC CC C
No. of
Full Cylindrical shank B4017.ZB20.12,0.Z02.84R 12 86 116 50 20 30 0,24 1 P600 . -D12, ..
d4 B4017.ZB20.13,0.Z02.91R 13 93 124 50 20 30 0,26 1 P600 . -D13, ..
Dc d1
B4017.ZB20.14,0.Z02.98R 14 101 132 50 20 30 0,27 1 P600 . -D14, ..
B4017.ZB20.15,0.Z02.105R 15 108 140 50 20 30 0,31 1 P600 . -D15, ..
Lc
l4 l5 B4017.ZB20.16,0.Z02.112R 16 115 148 50 20 30 0,31 1 P600 . -D16, ..
B4017.ZB20.17,0.Z02.119R 17 122 156 50 20 30 0,34 1 P600 . -D17, ..
B4017.ZB20.18,0.Z02.126R 18 133 164 50 20 30 0,34 1 P600 . -D18, ..
B4017.ZB20.19,0.Z02.133R 19 136 172 50 20 30 0,37 1 P600 . -D19, ..
B4017.ZB20.20,0.Z02.140R 20 144 180 50 20 30 0,41 1 P600 . -D20, ..
B4017.ZB20.21,0.Z02.147R 21 151 188 50 20 30 0,45 1 P600 . -D21, ..
B4017.ZB25.22,0.Z02.154R 22 158 197 56 25 35 0,62 1 P600 . -D22, ..
B4017.ZB25.23,0.Z02.161R 23 165 205 56 25 35 0,67 1 P600 . -D23, ..
B4017.ZB25.24,0.Z02.168R 24 172 213 56 25 35 0,71 1 P600 . -D24, ..
B4017.ZB25.25,0.Z02.175R 25 180 221 56 25 35 0,77 1 P600 . -D25, ..
B4017.ZB25.26,0.Z02.182R 26 187 229 56 25 35 0,83 1 P600 . -D26, ..
B4017.ZB25.27,0.Z02.189R 27 194 237 56 25 35 0,89 1 P600 . -D27, ..
B4017.ZB32.28,0.Z02.196R 28 201 246 60 32 42 1,17 1 P600 . -D28, ..
B4017.ZB32.29,0.Z02.203R 29 208 254 60 32 42 1,25 1 P600 . -D29, ..
B4017.ZB32.30,0.Z02.210R 30 215 262 60 32 42 1,34 1 P600 . -D30, ..
B4017.ZB32.31,0.Z02.217R 31 223 270 60 32 42 1,43 1 P600 . -D31, ..

Solid drilling
B1
Assembly
parts Dc [mm] 12–13 14–15 16–17 18–19 20–21 22–23 24–25 26–27 28–33 34–37
Accessories
Dc [mm] 12–13 14–17 18–19 20–25 26–37


Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 12–31,99 b
P6003-D.. 12–31,99 cb b
P6004-D.. 12–31,5 b
P6005-D.. 12–31,99 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
B4010
Xtra·tec®
Dc
18– 10×Dc Z =2
24,99 140°
P M K N S H O
B4010 CC C CC CC C
No. of
Dc d4 B4010.F20.20,0.Z02.200R 20 204 240 50 20 30 0,54 1 P600 . -D20, ..
d1 B4010.F25.22,0.Z02.220R 22 224 263 56 25 35 0,8 1 P600 . -D22, ..

B4010.F25.24,0.Z02.240R 24 244 285 56 25 35 0,9 1 P600 . -D24, ..
Lc
l4 l5


Solid drilling
B1
Assembly parts
Dc [mm] 18 20 22 24
Clamping screw for drill insert FS1399 (Torx 15IP) FS1400 (Torx 20IP) FS1401 (Torx 20IP) FS1402 (Torx 20IP)
Accessories
Dc [mm] 18 20–24
Torque screwdriver, analogue FS2003 FS2003

Tightening torque 1,5–5,0 Nm 1,5–5,0 Nm
Interchangeable blade FS2014 (Torx 15IP) FS2015 (Torx 20IP)
Screwdriver FS1485 (Torx 15IP) FS1486 (Torx 20IP)
Drill inserts
P M K N S
HC HC HC HC HC
WKK45C
WPP45C
WMP35
WMP35
WMP35
WNN25
Dc
Designation mm
P6001-D.. 18–24,7 b
P6003-D.. 18–24,7 cb b
P6004-D.. 18–24,5 b
P6005-D.. 18–24,7 c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 180 D1 B 444 B 456

Solid drilling
B1
Insert drills, 2 x Dc
B4212
Xtra·tec®
Dc
13,5– 2×Dc Z =1
59
P M K N S H O
B4212 CC CC CC C CC
No. of
Parallel shank with flat 1
B4212.F20.13,5.Z1.027R-1 13,5 27 47 50 20 30 0,17
1
1
B4212.F20.14.Z1.028R-1 14 28 48 50 20 30 0,17
Dc d1 d4 1
1
Lc B4212.F20.14,5.Z1.029R-1 14,5 29 49 50 20 30 0,17
1 P484 . P-1R- ..
l4 l5
1 P484 . C-1R- ..
B4212.F20.15.Z1.030R-1 15 30 50 50 20 30 0,17
1
1
B4212.F20.15,5.Z1.031R-1 15,5 31 51 50 20 30 0,18
1
1
B4212.F25.16.Z1.032R-1 16 32 57 56 25 32 0,32
1

B4212.F25.16,5.Z1.033R-2 16,5 33 58 56 25 32 0,3
1
1
B4212.F25.17.Z1.034R-2 17 34 59 56 25 32 0,42
Dc d1 d4 1
1
Lc B4212.F25.17,5.Z1.035R-2 17,5 35 60 56 25 32 0,4
1
l4 l5
1
B4212.F25.18.Z1.036R-2 18 36 61 56 25 32 0,33
1 P484 . P-2R- ..
1 P484 . C-2R- ..
B4212.F25.18,5.Z1.037R-2 18,5 37 62 56 25 32 0,45
1
1
B4212.F25.19.Z1.038R-2 19 38 63 56 25 32 0,34
1
1
B4212.F25.19,5.Z1.039R-2 19,5 39 64 56 25 32 0,35
1
1
B4212.F25.20.Z1.040R-2 20 40 65 56 25 32 0,45
1
B4212.F25.20,5.Z1.041R-3 20,5 41 66 56 25 32 0,44
1
1
B4212.F25.21.Z1.042R-3 21 42 67 56 25 32 0,45
Dc d1 d4 1
1
Lc B4212.F25.21,5.Z1.043R-3 21,5 43 68 56 25 32 0,37
1
l4 l5
1
B4212.F25.22.Z1.044R-3 22 44 69 56 25 32 0,37
1 P484 . P-3R- ..
1 P484 . C-3R- ..
B4212.F25.22,5.Z1.045R-3 22,5 45 70 56 25 32 0,46
1
1
B4212.F25.23.Z1.046R-3 23 46 71 56 25 32 0,48
1
1
B4212.F25.23,5.Z1.047R-3 23,5 47 72 56 25 32 0,44
1
1
B4212.F25.24.Z1.048R-3 24 48 73 56 25 32 0,48
1
Important: A disc forms where through holes are created by a rotating tool. This disc might then be ejected. Please take precautionary measures.

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
for indexable insert (Torx 6IP) (Torx 7IP) (Torx 8IP) (Torx 9IP) (Torx 15IP) (Torx 15IP) (Torx 20IP)
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
FS2085 (Torx 6IP) FS2011 (Torx 7IP) FS2012 (Torx 8IP) FS2013 (Torx 9IP) FS2014 (Torx 15IP) FS2015 (Torx 20IP)
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 1–3 bcc c bc c
P4840P-.R-E57 1–3 abc c bc c
P4840P-.R-E67 1–3 abc c bc b c
P4841P-.R-A57 1–3 bcc c bc c
P4841P-.R-E57 1–3 abc c bc c
P4840C-.R-E67 1–3 a c c ac b c
P4841C-.R-A57 1–3 b c c cc c
P4841C-.R-E57 1–3 b c c bc c
P48 . . C = Centre insert
HC = Coated carbide
P48 . . P = Outer insert
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4212
Xtra·tec®
Dc
13,5– 2×Dc Z =1
59
P M K N S H O
B4212 CC CC CC C CC
No. of
B4212.F25.24,5.Z1.049R-4 24,5 49 74 56 25 32 0,5
1
1
B4212.F25.25.Z1.050R-4 25 50 75 56 25 32 0,4
Dc d1 d4 1
1
Lc B4212.F32.25,5.Z1.051R-4 25,5 51 83 60 32 40 0,76
1
l4 l5
1
B4212.F32.26.Z1.052R-4 26 52 84 60 32 40 0,77
1
1
B4212.F32.26,5.Z1.053R-4 26,5 53 85 60 32 40 0,78
1 P484 . P-4R- ..
1 P484 . C-4R- ..
B4212.F32.27.Z1.054R-4 27 54 86 60 32 40 0,68
1
1
B4212.F32.27,5.Z1.055R-4 27,5 55 87 60 32 40 0,8
1
1
B4212.F32.28.Z1.056R-4 28 56 88 60 32 40 0,8
1
1
B4212.F32.28,5.Z1.057R-4 28,5 57 89 60 32 40 0,81
1
1
B4212.F32.29.Z1.058R-4 29 58 90 60 32 40 0,85
1
B4212.F32.29,5.Z1.059R-5 29,5 59 91 60 32 40 0,72
1
1
B4212.F32.30.Z1.060R-5 30 60 92 60 32 40 0,73
Dc d1 d4 1
1
Lc B4212.F32.31.Z1.062R-5 31 62 94 60 32 40 0,75
1
l4 l5
1 P484 . P-5R- ..
B4212.F32.32.Z1.064R-5 32 64 96 60 32 40 0,77
1 P484 . C-5R- ..
1
B4212.F32.33.Z1.066R-5 33 66 98 60 32 40 0,80
1
1
B4212.F32.34.Z1.068R-5 34 68 100 60 32 40 0,83
1
1
B4212.F32.35.Z1.070R-5 35 70 102 60 32 40 0,86
1

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 4–5 bcc c bc c
P4840P-.R-E57 4–5 abc c bc c
P4841P-.R-A57 4–5 bcc c bc c
P4841P-.R-E57 4–5 abc c bc c
P4840C-.R-E67 4–5 a c c ac b c
P4841C-.R-A57 4–5 b c c cc c
P4841C-.R-E57 4–5 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4212
Xtra·tec®
Dc
13,5– 2×Dc Z =1
59
P M K N S H O
B4212 CC CC CC C CC
No. of
B4212.F32.36.Z1.072R-6 36 72 104 60 32 40 0,84
1
1
B4212.F40.37.Z1.074R-6 37 74 114 70 40 50 1,36
Dc d1 d4 1
1
Lc B4212.F40.38.Z1.076R-6 38 76 116 70 40 50 1,39
1
l4 l5
1 P484 . P-6R- ..
B4212.F40.39.Z1.078R-6 39 78 118 70 40 50 1,43
1 P484 . C-6R- ..
1
B4212.F40.40.Z1.080R-6 40 80 120 70 40 50 1,47
1
1
B4212.F40.41.Z1.082R-6 41 82 122 70 40 50 1,51
1
1
B4212.F40.42.Z1.084R-6 42 84 124 70 40 50 1,56
1

B4212.F40.43.Z1.086R-7 43 86 126 70 40 50 1,54
1
1
B4212.F40.44.Z1.088R-7 44 88 128 70 40 50 1,58
Dc d1 d4 1
1
Lc B4212.F40.45.Z1.090R-7 45 90 130 70 40 50 1,63
1
l4 l5
1
B4212.F40.46.Z1.092R-7 46 92 132 70 40 50 1,68
1 P484 . P-7R- ..
1 P484 . C-7R- ..
B4212.F40.47.Z1.094R-7 47 94 134 70 40 50 1,73
1
1
B4212.F40.48.Z1.096R-7 48 96 136 70 40 50 1,78
1
1
B4212.F40.49.Z1.098R-7 49 98 138 70 40 50 1,84
1
1
B4212.F40.50.Z1.100R-7 50 100 140 70 40 50 1,9
1
B4212.F40.51.Z1.102R-8 51 102 142 70 40 50 1,90
1
1
B4212.F40.52.Z1.104R-8 52 104 144 70 40 50 1,96
Dc d1 d4 1
1
Lc B4212.F40.53.Z1.106R-8 53 106 146 70 40 50 2,02
1
l4 l5
1
B4212.F40.54.Z1.108R-8 54 108 148 70 40 50 2,09
1
1 P484 . P-8R- ..
B4212.F40.55.Z1.110R-8 55 110 150 70 40 50 2,16
1 P484 . C-8R- ..
1
B4212.F40.56.Z1.112R-8 56 112 152 70 40 50 2,23
1
1
B4212.F40.57.Z1.114R-8 57 114 154 70 40 50 2,31
1
1
B4212.F40.58.Z1.116R-8 58 116 156 70 40 50 2,38
1
1
B4212.F40.59.Z1.118R-8 59 118 158 70 40 50 2,47
1

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 6–8 bcc c bc c
P4840P-.R-E57 6–8 abc c bc c
P4841P-.R-A57 6–8 bcc c bc c
P4841P-.R-E57 6–8 abc c bc c
P4840C-.R-E67 6–8 a c c ac b c
P4841C-.R-A57 6–8 b c c cc c
P4841C-.R-E57 6–8 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4213
Xtra·tec®
Dc
13,5– 3×Dc Z =1
59
P M K N S H O
B4213 CC CC CC C CC
No. of
B4213.F20.13,5.Z1.040R-1 13,5 40,5 61 50 20 30 0,17
1
1
B4213.F20.14.Z1.042R-1 14 42 62 50 20 30 0,18
Dc d1 d4 1
1
Lc B4213.F20.14,5.Z1.043R-1 14,5 43,5 64 50 20 30 0,18
1 P484 . P-1R- ..
l4 l5
1 P484 . C-1R- ..
B4213.F20.15.Z1.045R-1 15 45 65 50 20 30 0,18
1
1
B4213.F20.15,5.Z1.046R-1 15,5 46,5 67 50 20 30 0,19
1
1
B4213.F25.16.Z1.048R-1 16 48 73 56 25 32 0,33
1
B4213.F25.16,5.Z1.049R-2 16,5 49,5 75 56 25 32 0,44
1
1
B4213.F25.17.Z1.051R-2 17 51 76 56 25 32 0,43
Dc d1 d 1
1
Lc B4213.F25.17,5.Z1.052R-2 17,5 52,5 77 56 25 32 0,44
1
l4 l5
1
B4213.F25.18.Z1.054R-2 18 54 79 56 25 32 0,43
1 P484 . P-2R- ..
1 P484 . C-2R- ..
B4213.F25.18,5.Z1.055R-2 18,5 55,5 80 56 25 32 0,46
1
1
B4213.F25.19.Z1.057R-2 19 57 82 56 25 32 0,46
1
1
B4213.F25.19,5.Z1.058R-2 19,5 58,5 84 56 25 32 0,47
1
1
B4213.F25.20.Z1.060R-2 20 60 85 56 25 32 0,48
1
B4213.F25.20,5.Z1.061R-3 20,5 61,5 87 56 25 32 0,5
1
1
B4213.F25.21.Z1.063R-3 21 63 88 56 25 32 0,4
Dc d1 d4 1
1
Lc B4213.F25.21,5.Z1.064R-3 21,5 64,5 90 56 25 32 0,5
1
l4 l5
1
B4213.F25.22.Z1.066R-3 22 66 91 56 25 32 0,42
1 P484 . P-3R- ..
1 P484 . C-3R- ..
B4213.F25.22,5.Z1.067R-3 22,5 67,5 93 56 25 32 0,52
1
1
B4213.F25.23.Z1.069R-3 23 69 94 56 25 32 0,43
1
1
B4213.F25.23,5.Z1.070R-3 23,5 70,5 96 56 25 32 0,53
1
1
B4213.F25.24.Z1.072R-3 24 72 97 56 25 32 0,44
1

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 1–3 bcc c bc c
P4840P-.R-E57 1–3 abc c bc c
P4841P-.R-A57 1–3 bcc c bc c
P4841P-.R-E57 1–3 abc c bc c
P4840C-.R-E67 1–3 a c c ac b c
P4841C-.R-A57 1–3 b c c cc c
P4841C-.R-E57 1–3 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4213
Xtra·tec®
Dc
13,5– 3×Dc Z =1
59
P M K N S H O
B4213 CC CC CC C CC
No. of
B4213.F25.24,5.Z1.073R-4 24,5 73,5 99 56 25 32 0,54
1
1
B4213.F25.25.Z1.075R-4 25 75 100 56 25 32 0,56
Dc d1 d4 1
1
Lc B4213.F32.25,5.Z1.076R-4 25,5 76,5 109 60 32 40 0,84
1
l4 l5
1
B4213.F32.26.Z1.078R-4 26 78 110 60 32 40 0,83
1
1
B4213.F32.26,5.Z1.079R-4 26,5 79,5 112 60 32 40 0,85
1 P484 . P-4R- ..
1 P484 . C-4R- ..
B4213.F32.27.Z1.081R-4 27 81 113 60 32 40 0,85
1
1
B4213.F32.27,5.Z1.082R-4 27,5 82,5 115 60 32 40 0,88
1
1
B4213.F32.28.Z1.084R-4 28 84 116 60 32 40 0,8
1
1
B4213.F32.28,5.Z1.085R-4 28,5 85,5 118 60 32 40 0,91
1
1
B4213.F32.29.Z1.087R-4 29 87 119 60 32 40 0,91
1
B4213.F32.29,5.Z1.088R-5 29,5 88,5 121 60 32 40 0,81
1
1
B4213.F32.30.Z1.090R-5 30 90 122 60 32 40 0,95
Dc d1 d4 1
1
Lc B4213.F32.31.Z1.093R-5 31 93 125 60 32 40 0,85
1
l4 l5
1 P484 . P-5R- ..
B4213.F32.32.Z1.096R-5 32 96 128 60 32 40 0,89
1 P484 . C-5R- ..
1
B4213.F32.33.Z1.099R-5 33 99 131 60 32 40 0,93
1
1
B4213.F32.34.Z1.102R-5 34 102 134 60 32 40 0,98
1
1
B4213.F32.35.Z1.105R-5 35 105 137 60 32 40 1,02
1

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 4–5 bcc c bc c
P4840P-.R-E57 4–5 abc c bc c
P4841P-.R-A57 4–5 bcc c bc c
P4841P-.R-E57 4–5 abc c bc c
P4840C-.R-E67 4–5 a c c ac b c
P4841C-.R-A57 4–5 b c c cc c
P4841C-.R-E57 4–5 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4213
Xtra·tec®
Dc
13,5– 3×Dc Z =1
59
P M K N S H O
B4213 CC CC CC C CC
No. of
B4213.F32.36.Z1.108R-6 36 108 140 60 32 40 0,99
1
1
B4213.F40.37.Z1.111R-6 37 111 151 70 40 50 1,53
Dc d1 d4 1
1
Lc B4213.F40.38.Z1.114R-6 38 114 154 70 40 50 1,58
1
l4 l5
1 P484 . P-6R- ..
B4213.F40.39.Z1.117R-6 39 117 157 70 40 50 1,63
1 P484 . C-6R- ..
1
B4213.F40.40.Z1.120R-6 40 120 160 70 40 50 1,69
1
1
B4213.F40.41.Z1.123R-6 41 123 163 70 40 50 1,75
1
1
B4213.F40.42.Z1.126R-6 42 126 166 70 40 50 1,82
1

B4213.F40.43.Z1.129R-7 43 129 169 70 40 50 1,80
1
1
B4213.F40.44.Z1.132R-7 44 132 172 70 40 50 1,87
Dc d1 d4 1
1
Lc B4213.F40.45.Z1.135R-7 45 135 175 70 40 50 1,94
1
l4 l5
1
B4213.F40.46.Z1.138R-7 46 138 178 70 40 50 2,01
1 P484 . P-7R- ..
1 P484 . C-7R- ..
B4213.F40.47.Z1.141R-7 47 141 181 70 40 50 2,09
1
1
B4213.F40.48.Z1.144R-7 48 144 184 70 40 50 2,17
1
1
B4213.F40.49.Z1.147R-7 49 147 187 70 40 50 2,25
1
1
B4213.F40.50.Z1.150R-7 50 150 190 70 40 50 2,34
1
B4213.F40.51.Z1.153R-8 51 153 193 70 40 50 2,33
1
1
B4213.F40.52.Z1.156R-8 52 156 196 70 40 50 2,42
Dc d1 d4 1
1
Lc B4213.F40.53.Z1.159R-8 53 159 199 70 40 50 2,51
1
l4 l5
1
B4213.F40.54.Z1.162R-8 54 162 202 70 40 50 2,61
1
1 P484 . P-8R- ..
B4213.F40.55.Z1.165R-8 55 165 205 70 40 50 2,72
1 P484 . C-8R- ..
1
B4213.F40.56.Z1.168R-8 56 168 208 70 40 50 2,83
1
1
B4213.F40.57.Z1.171R-8 57 171 211 70 40 50 2,94
1
1
B4213.F40.58.Z1.174R-8 58 174 214 70 40 50 3,07
1
1
B4213.F40.59.Z1.177R-8 59 177 217 70 40 50 3,18
1

Solid drilling
B1
Assembly
parts Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–35 36–42 43–59
Accessories
Dc [mm] 13,5–16 16,5–20 20,5–24 24,5–29 29,5–42 43–59
Torque screwdriver,
FS2001 FS2001 FS2001 FS2003 FS2003 FS2003
analogue
0,4–1,2 Nm 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Tightening torque
Interchangeable
blade
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 6–8 bcc c bc c
P4840P-.R-E57 6–8 abc c bc c
P4841P-.R-A57 6–8 bcc c bc c
P4841P-.R-E57 6–8 abc c bc c
P4840C-.R-E67 6–8 a c c ac b c
P4841C-.R-A57 6–8 b c c cc c
P4841C-.R-E57 6–8 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
Insert drills, 3 x Dc, Capto
B4213.C
Xtra·tec®
Dc
16−45 3×Dc Z =1
P M K N S H O
B4213.C CC CC CC C CC
No. of
Walter Capto™ in accordance 1 P484 . P-1R- ..
B4213.C4.16.Z1.048R-1 16 48 88 C4 0,4
with ISO 26623 1 P484 . C-1R- ..
1 P484 . P-2R- ..
B4213.C4.20.Z1.060R-2 20 60 100 C4 0,4
Dc d1 1 P484 . C-2R- ..
1 P484 . P-4R- ..
Lc B4213.C4.25.Z1.075R-4 25 75 115 C4 0,5
1 P484 . C-4R- ..
l4 1 P484 . P-5R- ..
B4213.C4.32.Z1.096R-5 32 96 135 C4 0,7
1 P484 . C-5R- ..
1 P484 . P-1R- ..
B4213.C5.16.Z1.048R-1 16 48 92 C5 0,7
1 P484 . C-1R- ..
1 P484 . P-2R- ..
B4213.C5.20.Z1.060R-2 20 60 105 C5 0,7
1 P484 . C-2R- ..
1 P484 . P-4R- ..
B4213.C5.25.Z1.075R-4 25 75 120 C5 0,8
1 P484 . C-4R- ..
1 P484 . P-5R- ..
B4213.C5.32.Z1.096R-5 32 96 140 C5 0,9
1 P484 . C-5R- ..
1 P484 . P-6R- ..
B4213.C5.40.Z1.120R-6 40 120 165 C5 1,3
1 P484 . C-6R- ..
1 P484 . P-4R- ..
B4213.C6.25.Z1.075R-4 25 75 125 C6 1,3
1 P484 . C-4R- ..
1 P484 . P-5R- ..
B4213.C6.32.Z1.096R-5 32 96 145 C6 1,4
1 P484 . C-5R- ..
1 P484 . P-6R- ..
B4213.C6.40.Z1.120R-6 40 120 170 C6 1,7
1 P484 . C-6R- ..
1 P484 . P-7R- ..
B4213.C6.45.Z1.135R-7 45 135 185 C6 2,0
1 P484 . C-7R- ..

Solid drilling
B1
Assembly
parts Dc [mm] 16 20 25 32 40 45
Clamping screw
for indexable insert
0,4 Nm 0,9 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 16 20 25 32–40 45
Torque screwdriver, analogue FS2001 FS2001 FS2003 FS2003 FS2003

Tightening torque 0,4–1,2 Nm 0,4–1,2 Nm 1,5–5,0 Nm 1,5–5,0 Nm 1,5–5,0 Nm
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 1–7 bcc c bc c
P4840P-.R-E57 1–7 abc c bc c
P4841P-.R-A57 1–7 bcc c bc c
P4841P-.R-E57 1–7 abc c bc c
P4840C-.R-E67 1–7 a c c ac b c
P4841C-.R-A57 1–7 b c c cc c
P4841C-.R-E57 1–7 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
Insert drills, 3 x Dc, NCT
B4213.N
Xtra·tec®
Dc
65−80
3×Dc Z =1
P M K N S H O
B4213 CC CC CC C CC
No. of
Modular NCT adaptor 3 P484 . P-5R- ..
B4213.N8.065.Z1.195R-5 65 195 245 NCT 80 4,1
1 P484 . C-5R- ..
d1 B4213.N8.068.Z1.204R-6
3
Dc 68 204 254 NCT 80 4,5
1
Lc
3 P484 . P-6R- ..
B4213.N8.070.Z1.210R-6 70 210 260 NCT 80 4,7
1 P484 . C-6R- ..
l4
3
B4213.N8.078.Z1.234R-6 78 234 284 NCT 80 5,9
1
5 P484 . P-5R- ..
B4213.N8.080.Z1.240R-5 80 240 290 NCT 80 6,2
1 P484 . C-5R- ..

Solid drilling
B1
Assembly parts
Dc [mm] 65 68 70 78 80
Internal cartridge FR737C-5 FR743C-6 FR743C-6 FR743C-6 FR737C-5
Clamping screw for indexable insert FS1453 (Torx 15IP) FS1453 (Torx 15IP) FS1453 (Torx 15IP) FS1453 (Torx 15IP) FS1453 (Torx 15IP)
Radial adjusting screw FS334 FS334 FS334 FS334 FS334
External cartridge 1 FR738P-5 FR744P-6 FR744P-6 FR744P-6 FR738P-5
External cartridge 2 FR741P-5 FR745P-6 FR746P-6 FR748P-6 FR739P-5
Clamping screw
FS1149 (SW 4) FS1149 (SW 4) FS1149 (SW 4) FS1149 (SW 4) FS1149 (SW 4)
for internal and external cartridge 1
5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm 5,0 Nm
Tightening torque
Clamping screw
FS966 (SW 5) FS966 (SW 5) FS966 (SW 5) FS966 (SW 5) FS966 (SW 5)
for external cartridge 2
8,0 Nm 8,0 Nm 8,0 Nm 8,0 Nm 8,0 Nm
Tightening torque
Accessories
Dc [mm] 65–80
Torque screwdriver, analogue FS2003

Tightening torque 1,5–5,0 Nm
Interchangeable blade FS2014 (Torx 15IP)
ISO 2936 Allen key

ISO2936-4 (SW 4)
for internal and external cartridge 1
ISO 2936 Allen key
ISO2936-5 (SW 5)
for external cartridge 2
Screwdriver FS1485 (Torx 15IP)
In tools with the diameter Dc = 80 mm, the external cartridge 1 (FR738P-5) is fitted three times
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 5–6 bcc c bc c
P4840P-.R-E57 5–6 abc c bc c
P4841P-.R-A57 5–6 bcc c bc c
P4841P-.R-E57 5–6 abc c bc c
P4840C-.R-E67 5–6 a c c ac b c
P4841C-.R-A57 5–6 b c c cc c
P4841C-.R-E57 5–6 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4214
Xtra·tec®
Dc
17−59
4×Dc Z =1
P M K N S H O
B4214 CC C CC C C
No. of
B4214.F25.17.Z1.068R-2 17 68 93 56 25 32 0,36
1
1
Dc d1 d4 B4214.F25.18.Z1.072R-2 18 72 97 56 25 32 0,38
1 P484 . P-2R- ..
Lc 1 P484 . C-2R- ..
B4214.F25.19.Z1.076R-2 19 76 101 56 25 32 0,39
l4 l5 1
1
B4214.F25.20.Z1.080R-2 20 80 105 56 25 32 0,4
1

B4214.F25.21.Z1.084R-3 21 84 109 56 25 32 0,51
1
1
Dc d1 d4 B4214.F25.22.Z1.088R-3 22 88 113 56 25 32 0,53
1 P484 . P-3R- ..
Lc 1 P484 . C-3R- ..
B4214.F25.23.Z1.092R-3 23 92 117 56 25 32 0,55
l4 l5 1
1
B4214.F25.24.Z1.096R-3 24 96 121 56 25 32 0,5
1

B4214.F25.25.Z1.100R-4 25 100 125 56 25 32 0,52
1
1
Dc d1 d4 B4214.F32.26.Z1.104R-4 26 104 136 60 32 40 0,8
1
Lc 1 P484 . P-4R- ..
B4214.F32.27.Z1.108R-4 27 108 140 60 32 40 0,83
l4 l5 1 P484 . C-4R- ..
1
B4214.F32.28.Z1.112R-4 28 112 144 60 32 40 0,92
1
1
B4214.F32.29.Z1.116R-4 29 116 148 60 32 40 0,9
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 2–4 bcc c bc c
P4840P-.R-E57 2–4 abc c bc c
P4841P-.R-A57 2–4 bcc c bc c
P4841P-.R-E57 2–4 abc c bc c
P4840C-.R-E67 2–4 a c c ac b c
P4841C-.R-A57 2–4 b c c cc c
P4841C-.R-E57 2–4 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4214
Xtra·tec®
Dc
17−59
4×Dc Z =1
P M K N S H O
B4214 CC C CC C C
No. of
B4214.F32.30.Z1.120R-5 30 120 152 60 32 40 0,91
1
1
Dc d1 d4 B4214.F32.31.Z1.124R-5 31 124 156 60 32 40 0,96
1
Lc 1
B4214.F32.32.Z1.128R-5 32 128 160 60 32 40 1
l4 l5 1 P484 . P-5R- ..
1 P484 . C-5R- ..
B4214.F32.33.Z1.132R-5 33 132 164 60 32 40 1,06
1
1
B4214.F32.34.Z1.136R-5 34 136 168 60 32 40 1,12
1
1
B4214.F32.35.Z1.140R-5 35 140 172 60 32 40 1,2
1

B4214.F32.36.Z1.144R-6 36 144 176 60 32 40 1,14
1
1
Dc d1 d4 B4214.F40.37.Z1.148R-6 37 148 188 70 40 50 1,69
1
Lc 1
B4214.F40.38.Z1.152R-6 38 152 192 70 40 50 1,76
l4 l5 1
1 P484 . P-6R- ..
B4214.F40.39.Z1.156R-6 39 156 196 70 40 50 1,83
1 P484 . C-6R- ..
1
B4214.F40.40.Z1.160R-6 40 160 200 70 40 50 1,91
1
1
B4214.F40.41.Z1.164R-6 41 164 204 70 40 50 1,99
1
1
B4214.F40.42.Z1.168R-6 42 168 208 70 40 50 2,08
1

B4214.F40.43.Z1.172R-7 43 172 212 70 40 50 2,04
1
1
Dc d1 d4 B4214.F40.44.Z1.176R-7 44 176 216 70 40 50 2,13
1
Lc 1
B4214.F40.45.Z1.180R-7 45 180 220 70 40 50 2,22
l4 l5 1
1
B4214.F40.46.Z1.184R-7 46 184 224 70 40 50 2,32
1 P484 . P-7R- ..
1 P484 . C-7R- ..
B4214.F40.47.Z1.188R-7 47 188 228 70 40 50 2,44
1
1
B4214.F40.48.Z1.192R-7 48 192 232 70 40 50 2,54
1
1
B4214.F40.49.Z1.196R-7 49 196 236 70 40 50 2,65
1
1
B4214.F40.50.Z1.200R-7 50 200 240 70 40 50 2,77
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 5–7 bcc c bc c
P4840P-.R-E57 5–7 abc c bc c
P4841P-.R-A57 5–7 bcc c bc c
P4841P-.R-E57 5–7 abc c bc c
P4840C-.R-E67 5–7 a c c ac b c
P4841C-.R-A57 5–7 b c c cc c
P4841C-.R-E57 5–7 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4214
Xtra·tec®
Dc
17−59
4×Dc Z =1
P M K N S H O
B4214 CC C CC C C
No. of
B4214.F40.51.Z1.204R-8 51 204 244 70 40 50 2,78
1
1
Dc d1 d4 B4214.F40.52.Z1.208R-8 52 208 248 70 40 50 2,91
1
Lc 1
B4214.F40.53.Z1.212R-8 53 212 252 70 40 50 3,03
l4 l5 1
1
B4214.F40.54.Z1.216R-8 54 216 256 70 40 50 3,16
1
1 P484 . P-8R- ..
B4214.F40.55.Z1.220R-8 55 220 260 70 40 50 3,3
1 P484 . C-8R- ..
1
B4214.F40.56.Z1.224R-8 56 224 264 70 40 50 3,44
1
1
B4214.F40.57.Z1.228R-8 57 228 268 70 40 50 3,58
1
1
B4214.F40.58.Z1.232R-8 58 232 272 70 40 50 3,75
1
1
B4214.F40.59.Z1.236R-8 59 236 276 70 40 50 3,91
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 8–8 bcc c bc c
P4840P-.R-E57 8–8 abc c bc c
P4841P-.R-A57 8–8 bcc c bc c
P4841P-.R-E57 8–8 abc c bc c
P4840C-.R-E67 8–8 a c c ac b c
P4841C-.R-A57 8–8 b c c cc c
P4841C-.R-E57 8–8 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4215
Xtra·tec®
Dc
17−59
5×Dc Z =1
P M K N S H O
B4215 CC CC C
No. of
B4215.F25.17.Z1.085R-2 17 85 110 56 25 32 0,38
1
1
Dc d1 d4 B4215.F25.18.Z1.090R-2 18 90 115 56 25 32 0,48
1 P484 . P-2R- ..
Lc 1 P484 . C-2R- ..
B4215.F25.19.Z1.095R-2 19 95 120 56 25 32 0,42
l4 l5 1
1
B4215.F25.20.Z1.100R-2 20 100 125 56 25 32 0,44
1

B4215.F25.21.Z1.105R-3 21 105 130 56 25 32 0,54
1
1
Dc d1 d4 B4215.F25.22.Z1.110R-3 22 110 135 56 25 32 0,58
1 P484 . P-3R- ..
Lc 1 P484 . C-3R- ..
B4215.F25.23.Z1.115R-3 23 115 140 56 25 32 0,51
l4 l5 1
1
B4215.F25.24.Z1.120R-3 24 120 145 56 25 32 0,55
1

B4215.F25.25.Z1.125R-4 25 125 150 56 25 32 0,57
1
1
Dc d1 d4 B4215.F32.26.Z1.130R-4 26 130 162 60 32 40 0,86
1
Lc 1 P484 . P-4R- ..
B4215.F32.27.Z1.135R-4 27 135 167 60 32 40 0,90
l4 l5 1 P484 . C-4R- ..
1
B4215.F32.28.Z1.140R-4 28 140 172 60 32 40 0,94
1
1
B4215.F32.29.Z1.145R-4 29 145 177 60 32 40 0,99
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 2–4 bcc c bc c
P4840P-.R-E57 2–4 abc c bc c
P4841P-.R-A57 2–4 bcc c bc c
P4841P-.R-E57 2–4 abc c bc c
P4840C-.R-E67 2–4 a c c ac b c
P4841C-.R-A57 2–4 b c c cc c
P4841C-.R-E57 2–4 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4215
Xtra·tec®
Dc
17−59
5×Dc Z =1
P M K N S H O
B4215 CC CC C
No. of
B4215.F32.30.Z1.150R-5 30 150 182 60 32 40 1,01
1
1
Dc d1 d4 B4215.F32.31.Z1.155R-5 31 155 187 60 32 40 1,06
1
Lc 1
B4215.F32.32.Z1.160R-5 32 160 192 60 32 40 1,12
l4 l5 1 P484 . P-5R- ..
1 P484 . C-5R- ..
B4215.F32.33.Z1.165R-5 33 165 197 60 32 40 1,19
1
1
B4215.F32.34.Z1.170R-5 34 170 202 60 32 40 1,26
1
1
B4215.F32.35.Z1.175R-5 35 175 207 60 32 40 1,34
1

B4215.F32.36.Z1.180R-6 36 180 212 60 32 40 1,29
1
1
Dc d1 d4 B4215.F40.37.Z1.185R-6 37 185 225 70 40 50 1,85
1
Lc 1
B4215.F40.38.Z1.190R-6 38 190 230 70 40 50 1,93
l4 l5 1
1 P484 . P-6R- ..
B4215.F40.39.Z1.195R-6 39 195 235 70 40 50 2,02
1 P484 . C-6R- ..
1
B4215.F40.40.Z1.200R-6 40 200 240 70 40 50 2,12
1
1
B4215.F40.41.Z1.205R-6 41 205 245 70 40 50 2,22
1
1
B4215.F40.42.Z1.210R-6 42 210 250 70 40 50 2,32
1

B4215.F40.43.Z1.215R-7 43 215 255 70 40 50 2,34
1
1
Dc d1 d4 B4215.F40.44.Z1.220R-7 44 220 260 70 40 50 2,44
1
Lc 1
B4215.F40.45.Z1.225R-7 45 225 265 70 40 50 2,55
l4 l5 1
1
B4215.F40.46.Z1.230R-7 46 230 270 70 40 50 2,65
1 P484 . P-7R- ..
1 P484 . C-7R- ..
B4215.F40.47.Z1.235R-7 47 235 275 70 40 50 2,77
1
1
B4215.F40.48.Z1.240R-7 48 240 280 70 40 50 2,9
1
1
B4215.F40.49.Z1.245R-7 49 245 285 70 40 50 3,04
1
1
B4215.F40.50.Z1.250R-7 50 250 290 70 40 50 3,18
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 5–7 bcc c bc c
P4840P-.R-E57 5–7 abc c bc c
P4841P-.R-A57 5–7 bcc c bc c
P4841P-.R-E57 5–7 abc c bc c
P4840C-.R-E67 5–7 a c c ac b c
P4841C-.R-A57 5–7 b c c cc c
P4841C-.R-E57 5–7 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
B4215
Xtra·tec®
Dc
17−59
5×Dc Z =1
P M K N S H O
B4215 CC CC C
No. of
B4215.F40.51.Z1.255R-8 51 255 295 70 40 50 3,21
1
1
Dc d1 d4 B4215.F40.52.Z1.260R-8 52 260 300 70 40 50 3,35
1
Lc 1
B4215.F40.53.Z1.265R-8 53 265 305 70 40 50 3,5
l4 l5 1
1
B4215.F40.54.Z1.270R-8 54 270 310 70 40 50 3,66
1
1 P484 . P-8R- ..
B4215.F40.55.Z1.275R-8 55 275 315 70 40 50 3,83
1 P484 . C-8R- ..
1
B4215.F40.56.Z1.280R-8 56 280 320 70 40 50 4,01
1
1
B4215.F40.57.Z1.285R-8 57 285 325 70 40 50 4,20
1
1
B4215.F40.58.Z1.290R-8 58 290 330 70 40 50 4,39
1
1
B4215.F40.59.Z1.295R-8 59 295 335 70 40 50 4,59
1

Solid drilling
B1
Assembly
parts Dc [mm] 17–20 21–24 25–29 30–35 36–42 43–59
Clamping screw
0,9 Nm 1,2 Nm 2,0 Nm 2,5 Nm 3,5 Nm 5,0 Nm
Tightening torque
Accessories
Dc [mm] 17–20 21–24 25–29 30–42 43–59

Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WXP40
WAK15
Designation Size
P4840P-.R-A57 8–8 bcc c bc c
P4840P-.R-E57 8–8 abc c bc c
P4841P-.R-A57 8–8 bcc c bc c
P4841P-.R-E57 8–8 abc c bc c
P4840C-.R-E67 8–8 a c c ac b c
P4841C-.R-A57 8–8 b c c cc c
P4841C-.R-E57 8–8 b c c bc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 185 D1 B 450 B 456

Solid drilling
B1
Insert drills, 2 x Dc, DIN1835/6535
B3212
Dc
10−18 2×Dc Z =1
P M K N S H O
B3212 CC CC CC C CC
No. of
Tool Dc Lc l4 l5 d1 indexable
Designation mm mm mm mm mm inserts Type
DIN 1835 form B, B3212.DF.10,0.Z01.20R 10 20 31 49 16 0,08 2
turned 90°
B3212.DF.10,2.Z01.20R 10,2 20,4 31 49 16 0,08 2
DIN 6535 form HE
B3212.DF.10,5.Z01.21R 10,5 21 32 49 16 0,09 2
B3212.DF.11,0.Z01.22R 11 22 34 49 16 0,09 2
Dc d1
B3212.DF.11,5.Z01.23R 11,5 23 35 49 16 0,09 2
Lc B3212.DF.11,7.Z01.23R 11,7 23,4 35 49 16 0,01 2 LCMX050203- ..
l4 l5
B3212.DF.12,0.Z01.24R 12 24 36 49 16 0,09 2
B3212.DF.12,5.Z01.25R 12,5 25 38 49 16 0,09 2
B3212.DF.13,0.Z01.26R 13 26 39 49 16 0,09 2
B3212.DF.13,5.Z01.27R 13,5 27 40 49 16 0,1 2
B3212.DF.13,7.Z01.27R 13,7 27,4 41 49 16 0,1 2
B3212.DF.14,0.Z01.28R 14 28 42 49 16 0,1 2
B3212.DF.14,5.Z01.29R 14,5 29 43 49 16 0,1 2
B3212.DF.15,0.Z01.30R 15 30 44 49 16 0,11 2
B3212.DF.15,5.Z01.31R 15,5 31 45 49 16 0,11 2
B3212.DF.15,7.Z01.31R 15,7 31,4 46 49 16 0,11 2
LCMX06T204- ..
B3212.DF.16,0.Z01.32R 16 32 47 49 16 0,11 2
B3212.DF.16,5.Z01.33R 16,5 33 48 49 16 0,12 2
B3212.DF.17,0.Z01.34R 17 34 49 49 16 0,12 2
B3212.DF.17,5.Z01.35R 17,5 35 51 49 16 0,12 2
B3212.DF.18,0.Z01.36R 18 36 52 49 16 0,13 2
Possible X adjustment for drilling into solid material greater than the nominal diameter
X = +0.2 mm/–0.1 mm ‡ ΔD = +0.4 mm/–0.2 mm

Solid drilling
B1
Assembly parts
Dc [mm] 10–13,7 14–15,7 16–18
Clamping screw for indexable insert FS1012 (Torx 6) FS1004 (Torx 7) FS1020 (Torx 7)
Accessories
Dc [mm] 10–13,7 14–18
ø20 ø35
Eccentric sleeve FS1207 FS1207
ø16
50 6
Screwdriver FS1063 (Torx 6) FS309 (Torx 7)
Clamping screw for chuck FS1209 (SW 8) FS1209 (SW 8)
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l l2
Designation mm mm
LCMX050203-B57 4 5,2 ab c c bbc c
LCMX06T204-B57 5,2 6,6 ab c c bbc c
LCMX050203-D57 4 5,2 ab cc cc bcc cc
LCMX06T204-D57 5,2 6,6 ab cc cc bcc cc
LCMX050203-E57 4 5,2 ab cc cc bcca cc
LCMX06T204-E57 5,2 6,6 ab cc cc bcca cc
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 188 D1 B 452 B 456

Solid drilling
B1
B3213
Dc
10−18 3×Dc Z =1
P M K N S H O
B3213 CC CC CC C CC
No. of
DIN 1835 form B, B3213.DF.10,0.Z01.30R 10 30 41 49 16 0,09 2
turned 90°
B3213.DF.10,2.Z01.30R 10,2 30,6 41 49 16 0,09 2
DIN 6535 form HE
B3213.DF.10,5.Z01.31R 10,5 31,5 43 49 16 0,09 2
B3213.DF.11,0.Z01.33R 11 33 45 49 16 0,09 2
Dc d1
B3213.DF.11,5.Z01.34R 11,5 34,5 47 49 16 0,1 2
Lc B3213.DF.11,7.Z01.35R 11,7 35,1 48 49 16 0,1 2 LCMX050203- ..
l4 l5
B3213.DF.12,0.Z01.36R 12 36 48 49 16 0,1 2
B3213.DF.12,5.Z01.37R 12,5 37,5 50 49 16 0,1 2
B3213.DF.13,0.Z01.39R 13 39 52 49 16 0,1 2
B3213.DF.13,5.Z01.40R 13,5 40,5 54 49 16 0,11 2
B3213.DF.13,7.Z01.41R 13,7 41,1 55 49 16 0,11 2
B3213.DF.14,0.Z01.42R 14 42 56 49 16 0,11 2
B3213.DF.14,5.Z01.43R 14,5 43,5 57 49 16 0,11 2
B3213.DF.15,0.Z01.45R 15 45 59 49 16 0,12 2
B3213.DF.15,5.Z01.46R 15,5 46,5 61 49 16 0,12 2
B3213.DF.15,7.Z01.47R 15,7 47 62 49 16 0,13 2
LCMX06T204- ..
B3213.DF.16,0.Z01.48R 16 48 63 49 16 0,13 2
B3213.DF.16,5.Z01.49R 16,5 49,5 65 49 16 0,12 2
B3213.DF.17,0.Z01.51R 17 51 66 49 16 0,12 2
B3213.DF.17,5.Z01.52R 17,5 52,5 68 49 16 0,14 2
B3213.DF.18,0.Z01.54R 18 54 70 49 16 0,16 2
X = +0.2 mm/–0.1 mm ‡ ΔD = +0.4 mm/–0.2 mm

Solid drilling
B1
Assembly parts
Dc [mm] 10–13,7 14–15,7 16–18
Accessories
Dc [mm] 10–13,7 14–18
ø20 ø35
ø16
50 6
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l l2
Designation mm mm
LCMX050203-B57 4 5,2 ab c c bbc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 188 D1 B 452 B 456

Solid drilling
B1
B3214
Dc
10−18 4×Dc Z =1
P M K N S H O
B3214 CC C
No. of
DIN 1835 form B, B3214.DF.10,0.Z01.40R 10 40 51 49 16 0,09 2
turned 90°
B3214.DF.10,5.Z01.42R 10,5 42 53 49 16 0,1 2
DIN 6535 form HE
B3214.DF.11,0.Z01.44R 11 44 56 49 16 0,1 2
B3214.DF.11,5.Z01.46R 11,5 46 58 49 16 0,1 2
Dc d1 LCMX050203- ..
B3214.DF.12,0.Z01.48R 12 48 60 49 16 0,11 2
Lc
l4 l5 B3214.DF.12,5.Z01.50R 12,5 50 62 49 16 0,11 2
B3214.DF.13,0.Z01.52R 13 52 65 49 16 0,12 2
B3214.DF.13,5.Z01.54R 13,5 54 67 49 16 0,12 2
B3214.DF.14,0.Z01.56R 14 56 70 49 16 0,12 2
B3214.DF.14,5.Z01.58R 14,5 58 72 49 16 0,13 2
B3214.DF.15,0.Z01.60R 15 60 74 49 16 0,13 2
B3214.DF.15,5.Z01.62R 15,5 62 77 49 16 0,14 2
LCMX06T204- ..
B3214.DF.16,0.Z01.64R 16 64 78 49 16 0,14 2
B3214.DF.16,5.Z01.66R 16,5 66 82 49 16 0,15 2
B3214.DF.17,5.Z01.70R 17,5 70 85 49 16 0,16 2
B3214.DF.18,0.Z01.72R 18 72 88 49 16 0,17 2
X = +0.2 mm/–0.1 mm ‡ ΔD = +0.4 mm/–0.2 mm

Solid drilling
B1
Assembly parts
Dc [mm] 10–13,5 14–15,5 16–18
Accessories
Dc [mm] 10–13,5 14–18
ø20 ø35
ø16
50 6
Indexable inserts
P M K N S
HC HC HC HC HC
WSP45S
WSP45S
WSP45S
WSP45S
WKP25S
WKP25S
WKP35S
WKP35S
WSP45
WSP45
WSP45
WXP40
WXP40
WXP40
WXP40
WAK15
l l2
Designation mm mm
LCMX050203-B57 4 5,2 ab c c bbc c
HC = Coated carbide
rkpiece Primary
machine, wo
ng
and clampi
Other
application
Good Moderate
Very good
B 188 D1 B 452 B 456

Solid drilling
B1

HSS drills
Machining
Drilling depth ~3 × Dc ~5 × Dc ~8 × Dc
Designation A1149XPL A1154TFT A1148 A1111 A2258 A3143 A3153 A6292TIN A1249XPL
UFL® VA Inox UFL® UFL® – LH LH MegaJet UFL®
Standard DIN 1897 DIN 1897 DIN 1897 DIN 1897 Walter DIN 1899 DIN 1899 Walter DIN 338
Dia. range [mm] 1–20 2–16 1–20 0,5–32 1–20 0,05–1,45 0,15–1,4 5–24 1–20
Page B 262 B 267 B 270 B 275 B 279 B 282 B 284 B 286 B 288
Machining
Drilling depth ~8 × Dc
Designation A1254TFT A1247 A1244 A1222 A1211TIN A1211 A1212 A1234 A1231
VA Inox Alpha® XE VA UFL® UFL® – LH LH
Standard DIN 338 DIN 338 DIN 338 DIN 338 DIN 338 DIN 338 DIN 338 DIN 338 DIN 338
Dia. range [mm] 3–16 1–16 0,3–15 1–16 0,5–16 0,2–22 0,4–16 1,016–12,303 0,2–20
Page B 292 B 294 B 298 B 303 B 308 B 308 B 316 B 319 B 322
Machining
Drilling depth ~12 × Dc ~16 × Dc ~22 × Dc ~30 × Dc ~60 × Dc
Designation A1549TFP A1547 A1544 A1522 A1511 A1622 A1722 A1822 A1922S
UFL® Alpha® XE VA UFL® UFL® UFL® UFL® UFL®
Standard DIN 340 DIN 340 DIN 340 DIN 340 DIN 340 DIN 1869 I DIN 1869 II DIN 1869 III Walter
Dia. range [mm] 1–12 1–12,7 1–12 1–22,225 0,5–22 2–12,7 3–12 3,5–12 6–14
Page B 325 B 327 B 330 B 332 B 336 B 339 B 342 B 343 B 344
LH = Left-hand cutting
B 248 HSS drilling and reaming tools

Solid drilling
B1

HSS drills
Machining
Drilling depth ~85 × Dc ~8 × Dc ~12 × Dc ~16 × Dc
Designation A1922L A4211TIN A4211 A4244 A4247 A4422 A4411 A4622 A4611
UFL® VA Alpha® XE UFL® UFL®
Standard Walter DIN 345 DIN 345 DIN 345 DIN 345 DIN 341 DIN 341 DIN 1870 I DIN 1870 I
Dia. range [mm] 8–12 10–30 3–100 10–32 10–40 10–31 5–50 12–30 8–50
Page B 345 B 346 B 346 B 353 B 355 B 357 B 359 B 362 B 363
Machining
Drilling depth ~22 × Dc 1:50
Designation A4722 K6221 K6222 K6223 K2929 K4929

UFL®
Standard DIN 1870 II DIN 8374 DIN 8378 DIN 8376 DIN 1898 DIN 1898
Dia. range [mm] 8–40 3,2–8,4 2,5–10,2 4,5–11 2–12 8–25
Page B 365 B 366 B 367 B 368 B 369 B 370
Machining
Twist drill set

Designation DIN 338
Type N; VA; UFL®
Page B 371
HSS drilling and reaming tools B 249

B 250
Solid drilling
B1
Designation key – HSS drilling tools
Example:
A 1 1 49 XPL
1 2 3 4 5
1 2 3
Tool type Shank shape Length in accordance with DIN or Walter standard
A Twist drills 1 Cylindrical Cylindrical Morse taper

K Multi-chamfer step drills/ 2 Cylindrical 1 DIN 1897 / 1899 1 Walter standard
pin hole drills/centre drills
3 Cylindrical 2 DIN 338 2 DIN 345
Z Drill sets in cartridges
and accessories 4 With Morse taper 3 DIN 334 3 DIN 346
6 DIN 1835 E 4 DIN 339 4 DIN 341
5 DIN 340 5 DIN 8041
6 DIN 1869 – Series I 6 DIN 1870 – Series I
7 DIN 1869 – Series II 7 DIN 1870 – Series II
8 DIN 1869 – Series III
9 Walter standard/DIN 8037
4 5
Tool type Coating
11 Type N (HSS) 34 Type UFL® (HSS-LH) 53 Type ESU (HSS-E LH) TiN TiN coating
12 Type H (HSS) 43 Type ESU (HSS-E) 54 Type VA stainless steel (HSS-E) TFT Tinal® TOP coating
14 120° NC centre drill (HSS) 44 Type VA (HSS-E) 92 Type MegaJet (HSS-E) TFP Tinal® point coating
15 90° NC centre drill (HSS) 47 Type Alpha® XE (HSS-E) XPL AlCrN coating
22 Type UFL® (HSS) 48 Type UFL® (HSS-E)
31 Type N (HSS-LH) 49 Type UFL® (HSS-E)

Solid drilling
B1
Walter Select – HSS drilling tools

STEP 1
Code Machining
structure


vermicular graphite


S S1–S10
cutting properties
alloys

chilled cast iron

O O1–O6 Other
plastics, graphite

Solid drilling
B1

HSS drills
Choose your tool:
Machining
– In accordance with the drilling depth

or standard
(e.g. ~3 × Dc or DIN 338)
(see step 1: P1–P15; M1–M3; …; O1–O6)
Designation A1149XPL A1154TFT A1148 A1111 A2258

UFL® VA Inox UFL® UFL®
Direction of cut Right Right Right Right Left
Standard DIN 1897 DIN 1897 DIN 1897 DIN 1897 Walter
Cutting tool material HSS-E HSS-E HSS HSS-E HSS-E

Coating XPL TFT Uncoated Uncoated Uncoated
Dia. range [mm] 1–20 2–16 1–20 0,5–32 1–20
Page B 262 B 267 B 270 B 275 B 279
STEP 3 Cutting data

HSS drills
from page B 474 onwards: = Wet machining (E = emulsion, O = oil) Designation A1149XPL A1154TFT
UFL® VA Inox
The cutting data must be selected from Walter GPS
Standard DIN 1897 DIN 1897
– Cutting speed: vc
VRR
= Cutting speed
Coating XPL TFT
vc; VCRR (vc rating chart for micro) VCRR = vc rating chart from page B 480 onwards Dia. range [mm] 1–20 2–16
Page B 262 B 267
– Feed: * The classification of the machining groups can be found in the material group comparison table
VRR (feed rating chart)

Tensile strength Rm
Brinell hardness HB
Machining group *

Material group
drilling and reaming tool. You will find the

N/mm2
cutting speed vc or the VCRR and VRR there. C ≤ 0.25% Annealed 125 430 P1 56 12 EO 56 12 EO
C > 0.25... ≤ 0.55% Annealed 190 640 P2 63 12 EO 56 12 EO
You can find the vc rating chart (VCRR) Non-alloyed steel
C > 0.25... ≤ 0.55% Heat-treated 210 710 P3 63 12 EO
C > 0.55% Annealed 190 640 P4 63 10 EO
and the feed rating chart (VRR) from page C > 0.55%
Free cutting steel (short-chipping)
Heat-treated
Annealed
300
220
1010
750
P5
P6
50
56
10
12
EO
EO 56 12 EO
B 480 onwards. P
Annealed
Heat-treated
175
285
590
960
P7
P8
56
45
12
10
EO
EO
56 12 EO
Low-alloyed steel
Heat-treated 380 1280 P9 28 7 EO
Heat-treated 430 1480 P10 18 5 EO
Annealed 200 680 P11 32 5 EO
High-alloyed steel and high-alloyed tool steel Hardened and tempered 300 1010 P12 50 10 EO
Hardened and tempered 380 1280 P13 25 7 EO
Ferritic/martensitic, annealed 200 680 P14 50 12 EO
Stainless steel
Martensitic heat-treated 330 1110 P15 50 10 EO

Solid drilling
B1
Walter Select
HSS drills
Machining
Designation A1149XPL A1154TFT A1148 A1111 A2258

UFL® VA Inox UFL® UFL®
Standard DIN 1897 DIN 1897 DIN 1897 DIN 1897 Walter
Cutting tool material HSS-E HSS-E HSS HSS-E HSS-E

Coating XPL TFT Uncoated Uncoated Uncoated
Dia. range [mm] 1–20 2–16 1–20 0,5–32 1–20
Page B 262 B 267 B 270 B 275 B 279
P Steel CC C CC CC CC
M Stainless steel CC CC CC C CC
N NF metals CC CC CC C CC
S Materials with difficult cutting properties C C CC C CC
H Hard materials
O Other C C C C C

Solid drilling
B1
~5 × Dc ~8 × Dc
A3143 A3153 A6292TIN A1249XPL A1254TFT A1247 A1244

MegaJet UFL® VA Inox Alpha® XE VA
Right Left Right Right Right Right Right
DIN 1899 DIN 1899 Walter DIN 338 DIN 338 DIN 338 DIN 338
HSS-E HSS-E HSS-E HSS-E HSS-E HSS-E HSS-E

Uncoated Uncoated TIN XPL TFT Uncoated Uncoated
0,05–1,45 0,15–1,4 5–24 1–20 3–16 1–16 0,3–15
B 282 B 284 B 286 B 288 B 292 B 294 B 298
CC CC CC CC C CC C
C C CC CC CC CC CC
CC CC CC CC CC
CC CC CC CC CC CC C
CC CC C C C CC CC
C C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
HSS drills
Machining
Designation A1222 A1211TIN A1211 A1212 A1234

UFL® Jobber Jobber UFL®
Standard DIN 338 DIN 338 DIN 338 DIN 338 DIN 338
Cutting tool material HSS HSS HSS HSS HSS

Coating Uncoated TIN Uncoated Uncoated Uncoated
Dia. range [mm] 1–16 0,5–16 0,2–22 0,4–16 1,016–12,303
Page B 303 B 308 B 308 B 316 B 319
P Steel CC CC CC CC
M Stainless steel C C C C
N NF metals CC C C C CC
H Hard materials
O Other C C C C C

Solid drilling
B1
~8 × Dc ~12 × Dc ~16 × Dc
A1231 A1549TFP A1547 A1544 A1522 A1511 A1622

UFL® Alpha® XE VA UFL® UFL®
Left Right Right Right Right Right Right
DIN 338 DIN 340 DIN 340 DIN 340 DIN 340 DIN 340 DIN 1869 I
HSS HSS-E HSS-E HSS-E HSS HSS HSS

Uncoated TFP Uncoated Uncoated Uncoated Uncoated Uncoated
0,2–20 1–12 1–12,7 1–12 1–22,225 0,5–22 2–12,7
B 322 B 325 B 327 B 330 B 332 B 336 B 339
CC CC C C CC C CC
CC CC CC C C C
CC CC CC CC C CC
C CC C C CC C CC
C CC CC C C C
C C C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
HSS drills
Machining
Drilling depth ~22 × Dc ~30 × Dc ~60 × Dc ~85 × Dc ~8 × Dc
Designation A1722 A1822 A1922S A1922L A4211TIN

UFL® UFL® UFL® UFL®
Direction of cut Right Right Right Right Right
Standard DIN 1869 II DIN 1869 III Walter Walter DIN 345

Coating Uncoated Uncoated Uncoated Uncoated TIN
Dia. range [mm] 3–12 3,5–12 6–14 8–12 10–30
Page B 342 B 343 B 344 B 345 B 346
M Stainless steel C C C C CC
N NF metals CC CC CC CC C
S Materials with difficult cutting properties C C C C C
H Hard materials
O Other C C C C C

Solid drilling
B1
~8 × Dc ~12 × Dc ~16 × Dc
A4211 A4244 A4247 A4422 A4411 A4622 A4611

VA Alpha® XE UFL® UFL®
Right Right Right Right Right Right Right
DIN 345 DIN 345 DIN 345 DIN 341 DIN 341 DIN 1870 I DIN 1870 I
HSS HSS-E HSS-E HSS HSS HSS HSS

Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated
3–100 10–32 10–40 10–31 5–50 12–30 8–50
B 346 B 353 B 355 B 357 B 359 B 362 B 363
CC C CC CC CC CC C
C CC CC C C C C
CC CC CC CC CC C
C C CC CC C CC C
C CC CC C C C C
C C C C C C
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
HSS drills
Machining
Designation A4722 K6221 K6222 K6223 K2929 K4929

UFL®
Direction of cut Right
Standard DIN 1870 II DIN 8374 DIN 8378 DIN 8376 DIN 1898 DIN 1898
Cutting tool material HSS HSS HSS HSS HSS HSS

Coating Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated
Dia. range [mm] 8–40 3,2–8,4 2,5–10,2 4,5–11 2–12 8–25
Page B 365 B 366 B 367 B 368 B 369 B 370
P Steel CC CC CC CC CC CC
M Stainless steel C CC CC CC CC CC
K Cast iron CC CC CC CC CC CC
N NF metals CC CC CC CC CC CC
S Materials with difficult cutting properties C CC CC CC CC CC
H Hard materials
O Other C CC CC CC CC CC

B 261
Solid drilling
B1
HSS-E twist drills, extra short (Stub)
A1149XPL
UFL®
DIN
~3×Dc 1897
130°
P M K N S H O
XPL CC CC CC CC C C
Dc d1
Designation h8 Dc Lc l1 l2 f11
XPL mm inches/no. mm mm mm mm
Parallel shank A1149XPL-1 1 4 26 6 1
A1149XPL-NO60 1,016 No. 60 4 26 6 1,016
Dc d1 A1149XPL-NO59 1,041 No. 59 4 26 6 1,041
A1149XPL-NO58 1,067 No. 58 5 28 7 1,067
Lc
A1149XPL-NO57 1,092 No. 57 5 28 7 1,092
l2
l1 A1149XPL-1.1 1,1 5 28 7 1,1
A1149XPL-NO56 1,181 No. 56 6 30 8 1,181
A1149XPL-3/64IN 1,191 3/64“ 6 30 8 1,191
A1149XPL-1.2 1,2 6 30 8 1,2
A1149XPL-1.3 1,3 6 30 8 1,3
A1149XPL-NO55 1,321 No. 55 6 32 9 1,321
A1149XPL-NO54 1,397 No. 54 6 32 9 1,397
A1149XPL-1.4 1,4 6 32 9 1,4
A1149XPL-1.5 1,5 6 32 9 1,5
A1149XPL-NO53 1,511 No. 53 7 34 10 1,511
A1149XPL-1/16IN 1,588 1/16“ 7 34 10 1,588
A1149XPL-1.6 1,6 7 34 10 1,6
A1149XPL-NO52 1,613 No. 52 7 34 10 1,613
A1149XPL-1.7 1,7 7 34 10 1,7
A1149XPL-NO51 1,702 No. 51 8 36 11 1,702
A1149XPL-NO50 1,778 No. 50 8 36 11 1,778
A1149XPL-1.8 1,8 8 36 11 1,8
A1149XPL-NO49 1,854 No. 49 8 36 11 1,854
A1149XPL-1.9 1,9 8 36 11 1,9
A1149XPL-NO48 1,93 No. 48 8 38 12 1,93
A1149XPL-5/64IN 1,984 5/64“ 8 38 12 1,984
A1149XPL-NO47 1,994 No. 47 8 38 12 1,994
A1149XPL-2 2 8 38 12 2
A1149XPL-NO46 2,057 No. 46 8 38 12 2,057
A1149XPL-NO45 2,083 No. 45 8 38 12 2,083
A1149XPL-2.1 2,1 8 38 12 2,1
A1149XPL-NO44 2,184 No. 44 9 40 13 2,184
A1149XPL-2.2 2,2 9 40 13 2,2
A1149XPL-NO43 2,261 No. 43 9 40 13 2,261
A1149XPL-2.3 2,3 9 40 13 2,3
A1149XPL-NO42 2,375 No. 42 10 43 14 2,375
A1149XPL-3/32IN 2,381 3/32“ 10 43 14 2,381
A1149XPL-2.4 2,4 10 43 14 2,4
A1149XPL-NO41 2,438 No. 41 10 43 14 2,438
A1149XPL-NO40 2,489 No. 40 10 43 14 2,489
A1149XPL-2.5 2,5 10 43 14 2,5
A1149XPL-NO39 2,527 No. 39 10 43 14 2,527
A1149XPL-NO38 2,578 No. 38 10 43 14 2,578
A1149XPL-2.6 2,6 10 43 14 2,6
A1149XPL-NO37 2,642 No. 37 10 43 14 2,642
A1149XPL-2.7 2,7 11 46 16 2,7
A1149XPL-NO36 2,705 No. 36 11 46 16 2,705
A1149XPL-7/64IN 2,778 7/64“ 11 46 16 2,778
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1149XPL-NO35 2,794 No. 35 11 46 16 2,794
A1149XPL-2.8 2,8 11 46 16 2,8
Dc d1 A1149XPL-NO34 2,819 No. 34 11 46 16 2,819
A1149XPL-NO33 2,87 No. 33 11 46 16 2,87
Lc
A1149XPL-2.9 2,9 11 46 16 2,9
l2
l1 A1149XPL-NO32 2,946 No. 32 11 46 16 2,946
A1149XPL-3 3 11 46 16 3
A1149XPL-NO31 3,048 No. 31 12 49 18 3,048
A1149XPL-3.1 3,1 12 49 18 3,1
A1149XPL-1/8IN 3,175 1/8“ 12 49 18 3,175
A1149XPL-3.2 3,2 12 49 18 3,2
A1149XPL-NO30 3,264 No. 30 12 49 18 3,264
A1149XPL-3.3 3,3 12 49 18 3,3
A1149XPL-3.4 3,4 14 52 20 3,4
A1149XPL-NO29 3,454 No. 29 14 52 20 3,454
A1149XPL-3.5 3,5 14 52 20 3,5
A1149XPL-NO28 3,569 No. 28 14 52 20 3,569
A1149XPL-9/64IN 3,572 9/64“ 14 52 20 3,572
A1149XPL-3.6 3,6 14 52 20 3,6
A1149XPL-NO27 3,658 No. 27 14 52 20 3,658
A1149XPL-3.7 3,7 14 52 20 3,7
A1149XPL-NO26 3,734 No. 26 14 52 20 3,734
A1149XPL-NO25 3,797 No. 25 15 55 22 3,797
A1149XPL-3.8 3,8 15 55 22 3,8
A1149XPL-NO24 3,861 No. 24 15 55 22 3,861
A1149XPL-3.9 3,9 15 55 22 3,9
A1149XPL-NO23 3,912 No. 23 15 55 22 3,912
A1149XPL-5/32IN 3,969 5/32“ 15 55 22 3,969
A1149XPL-NO22 3,988 No. 22 15 55 22 3,988
A1149XPL-4 4 15 55 22 4
A1149XPL-NO21 4,039 No. 21 15 55 22 4,039
A1149XPL-NO20 4,089 No. 20 15 55 22 4,089
A1149XPL-4.1 4,1 15 55 22 4,1
A1149XPL-4.2 4,2 15 55 22 4,2
A1149XPL-NO19 4,216 No. 19 15 55 22 4,216
A1149XPL-4.3 4,3 16 58 24 4,3
A1149XPL-NO18 4,305 No. 18 16 58 24 4,305
A1149XPL-11/64IN 4,366 11/64“ 16 58 24 4,366
A1149XPL-NO17 4,394 No. 17 16 58 24 4,394
A1149XPL-4.4 4,4 16 58 24 4,4
A1149XPL-NO16 4,496 No. 16 16 58 24 4,496
A1149XPL-4.5 4,5 16 58 24 4,5
A1149XPL-NO15 4,572 No. 15 16 58 24 4,572
A1149XPL-4.6 4,6 16 58 24 4,6
A1149XPL-NO14 4,623 No. 14 16 58 24 4,623
A1149XPL-4.65 4,65 16 58 24 4,65
A1149XPL-NO13 4,699 No. 13 16 58 24 4,699
A1149XPL-4.7 4,7 16 58 24 4,7
A1149XPL-3/16IN 4,763 3/16“ 18 62 26 4,763
A1149XPL-4.8 4,8 18 62 26 4,8
A1149XPL-NO12 4,801 No. 12 18 62 26 4,801
A1149XPL-NO11 4,851 No. 11 18 62 26 4,851
A1149XPL-4.9 4,9 18 62 26 4,9
A1149XPL-NO10 4,915 No. 10 18 62 26 4,915
A1149XPL-NO9 4,978 No. 09 18 62 26 4,978
A1149XPL-5 5 18 62 26 5
A1149XPL-NO8 5,055 No. 08 18 62 26 5,055
A1149XPL-5.1 5,1 18 62 26 5,1
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1149XPL-13/64IN 5,159 13/64“ 18 62 26 5,159
Dc d1 A1149XPL-NO6 5,182 No. 06 18 62 26 5,182
A1149XPL-5.2 5,2 18 62 26 5,2
Lc
A1149XPL-NO5 5,22 No. 05 18 62 26 5,22
l2
l1 A1149XPL-5.3 5,3 18 62 26 5,3
A1149XPL-NO4 5,309 No. 04 19 66 28 5,309
A1149XPL-5.4 5,4 19 66 28 5,4
A1149XPL-NO3 5,41 No. 03 19 66 28 5,41
A1149XPL-5.5 5,5 19 66 28 5,5
A1149XPL-5.55 5,55 19 66 28 5,55
A1149XPL-7/32IN 5,556 7/32“ 19 66 28 5,556
A1149XPL-5.6 5,6 19 66 28 5,6
A1149XPL-NO2 5,613 No. 02 19 66 28 5,613
A1149XPL-5.7 5,7 19 66 28 5,7
A1149XPL-NO1 5,791 No. 01 19 66 28 5,791
A1149XPL-5.8 5,8 19 66 28 5,8
A1149XPL-5.9 5,9 19 66 28 5,9
A1149XPL-LET.A 5,944 Let.A 19 66 28 5,944
A1149XPL-15/64IN 5,953 15/64“ 19 66 28 5,953
A1149XPL-6 6 19 66 28 6
A1149XPL-LET.B 6,045 Let.B 20 70 31 6,045
A1149XPL-6.1 6,1 20 70 31 6,1
A1149XPL-LET.C 6,147 Let.C 20 70 31 6,147
A1149XPL-6.2 6,2 20 70 31 6,2
A1149XPL-LET.D 6,248 Let.D 20 70 31 6,248
A1149XPL-6.3 6,3 20 70 31 6,3
A1149XPL-1/4IN 6,35 1/4“ 20 70 31 6,35
A1149XPL-6.4 6,4 20 70 31 6,4
A1149XPL-6.5 6,5 20 70 31 6,5
A1149XPL-LET.F 6,528 Let.F 20 70 31 6,528
A1149XPL-6.6 6,6 20 70 31 6,6
A1149XPL-LET.G 6,629 Let.G 20 70 31 6,629
A1149XPL-6.7 6,7 20 70 31 6,7
A1149XPL-17/64IN 6,747 17/64“ 22 74 34 6,747
A1149XPL-LET.H 6,756 Let.H 22 74 34 6,756
A1149XPL-6.8 6,8 22 74 34 6,8
A1149XPL-6.9 6,9 22 74 34 6,9
A1149XPL-LET.I 6,909 Let.I 22 74 34 6,909
A1149XPL-7 7 22 74 34 7
A1149XPL-LET.J 7,036 Let.J 22 74 34 7,036
A1149XPL-7.1 7,1 22 74 34 7,1
A1149XPL-LET.K 7,137 Let.K 22 74 34 7,137
A1149XPL-9/32IN 7,144 9/32“ 22 74 34 7,144
A1149XPL-7.2 7,2 22 74 34 7,2
A1149XPL-7.3 7,3 22 74 34 7,3
A1149XPL-LET.L 7,366 Let.L 22 74 34 7,366
A1149XPL-7.4 7,4 22 74 34 7,4
A1149XPL-LET.M 7,493 Let.M 22 74 34 7,493
A1149XPL-7.5 7,5 22 74 34 7,5
A1149XPL-19/64IN 7,541 19/64“ 24 79 37 7,541
A1149XPL-7.6 7,6 24 79 37 7,6
A1149XPL-LET.N 7,671 Let.N 24 79 37 7,671
A1149XPL-7.7 7,7 24 79 37 7,7
A1149XPL-7.8 7,8 24 79 37 7,8
A1149XPL-7.9 7,9 24 79 37 7,9
A1149XPL-5/16IN 7,938 5/16“ 24 79 37 7,938
A1149XPL-8 8 24 79 37 8
A1149XPL-LET.O 8,026 Let.O 24 79 37 8,026
A1149XPL-8.1 8,1 24 79 37 8,1
A1149XPL-8.2 8,2 24 79 37 8,2
A1149XPL-LET.P 8,204 Let.P 24 79 37 8,204
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1149XPL-8.3 8,3 24 79 37 8,3
A1149XPL-21/64IN 8,334 21/64“ 24 79 37 8,334
Dc d1 A1149XPL-8.4 8,4 24 79 37 8,4
A1149XPL-LET.Q 8,433 Let.Q 24 79 37 8,433
Lc
A1149XPL-8.5 8,5 24 79 37 8,5
l2
l1 A1149XPL-8.6 8,6 25 84 40 8,6
A1149XPL-LET.R 8,611 Let.R 25 84 40 8,611
A1149XPL-8.7 8,7 25 84 40 8,7
A1149XPL-11/32IN 8,731 11/32“ 25 84 40 8,731
A1149XPL-8.8 8,8 25 84 40 8,8
A1149XPL-LET.S 8,839 Let.S 25 84 40 8,839
A1149XPL-8.9 8,9 25 84 40 8,9
A1149XPL-9 9 25 84 40 9
A1149XPL-LET.T 9,093 Let.T 25 84 40 9,093
A1149XPL-9.1 9,1 25 84 40 9,1
A1149XPL-23/64IN 9,128 23/64“ 25 84 40 9,128
A1149XPL-9.2 9,2 25 84 40 9,2
A1149XPL-9.3 9,3 25 84 40 9,3
A1149XPL-LET.U 9,347 Let.U 25 84 40 9,347
A1149XPL-9.4 9,4 25 84 40 9,4
A1149XPL-9.5 9,5 25 84 40 9,5
A1149XPL-3/8IN 9,525 3/8“ 27 89 43 9,525
A1149XPL-LET.V 9,576 Let.V 27 89 43 9,576
A1149XPL-9.6 9,6 27 89 43 9,6
A1149XPL-9.7 9,7 27 89 43 9,7
A1149XPL-9.8 9,8 27 89 43 9,8
A1149XPL-LET.W 9,804 Let.W 27 89 43 9,804
A1149XPL-9.9 9,9 27 89 43 9,9
A1149XPL-25/64IN 9,922 25/64“ 27 89 43 9,922
A1149XPL-10 10 27 89 43 10
A1149XPL-LET.X 10,084 Let.X 27 89 43 10,084
A1149XPL-10.2 10,2 27 89 43 10,2
A1149XPL-LET.Y 10,262 Let.Y 27 89 43 10,262
A1149XPL-13/32IN 10,319 13/32“ 27 89 43 10,319
A1149XPL-LET.Z 10,49 Let.Z 27 89 43 10,49
A1149XPL-10.5 10,5 27 89 43 10,5
A1149XPL-27/64IN 10,716 27/64“ 29 95 47 10,716
A1149XPL-10.8 10,8 29 95 47 10,8
A1149XPL-11 11 29 95 47 11
A1149XPL-7/16IN 11,113 7/16“ 29 95 47 11,113
A1149XPL-11.2 11,2 29 95 47 11,2
A1149XPL-11.3 11,3 29 95 47 11,3
A1149XPL-11.5 11,5 29 95 47 11,5
A1149XPL-29/64IN 11,509 29/64“ 29 95 47 11,509
A1149XPL-11.8 11,8 29 95 47 11,8
A1149XPL-15/32IN 11,906 15/32“ 37 102 51 11,906
A1149XPL-12 12 37 102 51 12
A1149XPL-31/64IN 12,303 31/64“ 37 102 51 12,303
A1149XPL-12.5 12,5 37 102 51 12,5
A1149XPL-1/2IN 12,7 1/2“ 37 102 51 12,7
A1149XPL-12.8 12,8 37 102 51 12,8
A1149XPL-13 13 37 102 51 13
A1149XPL-33/64IN 13,097 33/64“ 37 102 51 13,097
A1149XPL-13.1 13,1 37 102 51 13,1
A1149XPL-13.3 13,3 40 107 54 13,3
A1149XPL-17/32IN 13,494 17/32“ 40 107 54 13,494
A1149XPL-13.5 13,5 40 107 54 13,5
A1149XPL-35/64IN 13,891 35/64“ 40 107 54 13,891
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1149XPL-9/16IN 14,288 9/16“ 41 111 56 14,288
Dc d1 A1149XPL-14.5 14,5 41 111 56 14,5
A1149XPL-37/64IN 14,684 37/64“ 41 111 56 14,684
Lc
A1149XPL-15 15 41 111 56 15
l2
l1 A1149XPL-19/32IN 15,081 19/32“ 42 115 58 15,081
A1149XPL-15.1 15,1 42 115 58 15,1
A1149XPL-15.3 15,3 42 115 58 15,3
A1149XPL-39/64IN 15,478 39/64“ 42 115 58 15,478
A1149XPL-15.5 15,5 42 115 58 15,5
A1149XPL-5/8IN 15,875 5/8“ 42 115 58 15,875
A1149XPL-16 16 42 115 58 16
A1149XPL-41/64IN 16,272 41/64“ 43 119 60 16,272
A1149XPL-16.5 16,5 43 119 60 16,5
A1149XPL-21/32IN 16,669 21/32“ 43 119 60 16,669
A1149XPL-17 17 43 119 60 17
A1149XPL-43/64IN 17,066 43/64“ 44 123 62 17,066
A1149XPL-11/16IN 17,463 11/16“ 44 123 62 17,463
A1149XPL-17.5 17,5 44 123 62 17,5
A1149XPL-45/64IN 17,859 45/64“ 44 123 62 17,859
A1149XPL-18 18 44 123 62 18
A1149XPL-23/32IN 18,256 23/32“ 45 127 64 18,256
A1149XPL-18.5 18,5 45 127 64 18,5
A1149XPL-47/64IN 18,653 47/64“ 45 127 64 18,653
A1149XPL-19 19 45 127 64 19
A1149XPL-3/4IN 19,05 3/4“ 46 131 66 19,05
A1149XPL-19.5 19,5 46 131 66 19,5
A1149XPL-20 20 46 131 66 20
XIII D1 B 474 B 482

Solid drilling
B1
HSS-E twist drills, short series
A1154TFT
VA Inox
DIN
~3×Dc 1897
118°
P M K N S H O
TFT C CC CC C C
Dc d1
Designation h8 Lc l1 l2 f11
TFT mm mm mm mm mm
Parallel shank A1154TFT-2 2 8 38 12 2
A1154TFT-2.1 2,1 8 38 12 2,1
Dc d1 A1154TFT-2.2 2,2 9 40 13 2,2
A1154TFT-2.3 2,3 9 40 13 2,3
Lc
A1154TFT-2.4 2,4 10 43 14 2,4
l2
l1 A1154TFT-2.5 2,5 10 43 14 2,5
A1154TFT-2.6 2,6 10 43 14 2,6
A1154TFT-2.7 2,7 11 46 16 2,7
A1154TFT-2.8 2,8 11 46 16 2,8
A1154TFT-2.9 2,9 11 46 16 2,9
A1154TFT-3 3 11 46 16 3
A1154TFT-3.1 3,1 12 49 18 3,1
A1154TFT-3.2 3,2 12 49 18 3,2
A1154TFT-3.3 3,3 12 49 18 3,3
A1154TFT-3.4 3,4 14 52 20 3,4
A1154TFT-3.5 3,5 14 52 20 3,5
A1154TFT-3.6 3,6 14 52 20 3,6
A1154TFT-3.7 3,7 14 52 20 3,7
A1154TFT-3.8 3,8 15 55 22 3,8
A1154TFT-3.9 3,9 15 55 22 3,9
A1154TFT-4 4 15 55 22 4
A1154TFT-4.1 4,1 15 55 22 4,1
A1154TFT-4.2 4,2 15 55 22 4,2
A1154TFT-4.3 4,3 16 58 24 4,3
A1154TFT-4.4 4,4 16 58 24 4,4
A1154TFT-4.5 4,5 16 58 24 4,5
A1154TFT-4.6 4,6 16 58 24 4,6
A1154TFT-4.65 4,65 16 58 24 4,65
A1154TFT-4.7 4,7 16 58 24 4,7
A1154TFT-4.8 4,8 18 62 26 4,8
A1154TFT-4.9 4,9 18 62 26 4,9
A1154TFT-5 5 18 62 26 5
A1154TFT-5.1 5,1 18 62 26 5,1
A1154TFT-5.2 5,2 18 62 26 5,2
A1154TFT-5.3 5,3 18 62 26 5,3
A1154TFT-5.4 5,4 19 66 28 5,4
A1154TFT-5.5 5,5 19 66 28 5,5
A1154TFT-5.55 5,55 19 66 28 5,55
A1154TFT-5.6 5,6 19 66 28 5,6
A1154TFT-5.7 5,7 19 66 28 5,7
A1154TFT-5.8 5,8 19 66 28 5,8
A1154TFT-5.9 5,9 19 66 28 5,9
A1154TFT-6 6 19 66 28 6
A1154TFT-6.1 6,1 20 70 31 6,1
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
TFT mm mm mm mm mm
Parallel shank A1154TFT-6.2 6,2 20 70 31 6,2
A1154TFT-6.3 6,3 20 70 31 6,3
Dc d1 A1154TFT-6.4 6,4 20 70 31 6,4
A1154TFT-6.5 6,5 20 70 31 6,5
Lc
A1154TFT-6.6 6,6 20 70 31 6,6
l2
l1 A1154TFT-6.7 6,7 20 70 31 6,7
A1154TFT-6.8 6,8 22 74 34 6,8
A1154TFT-6.9 6,9 22 74 34 6,9
A1154TFT-7 7 22 74 34 7
A1154TFT-7.1 7,1 22 74 34 7,1
A1154TFT-7.2 7,2 22 74 34 7,2
A1154TFT-7.3 7,3 22 74 34 7,3
A1154TFT-7.4 7,4 22 74 34 7,4
A1154TFT-7.5 7,5 22 74 34 7,5
A1154TFT-7.6 7,6 24 79 37 7,6
A1154TFT-7.7 7,7 24 79 37 7,7
A1154TFT-7.8 7,8 24 79 37 7,8
A1154TFT-7.9 7,9 24 79 37 7,9
A1154TFT-8 8 24 79 37 8
A1154TFT-8.1 8,1 24 79 37 8,1
A1154TFT-8.2 8,2 24 79 37 8,2
A1154TFT-8.3 8,3 24 79 37 8,3
A1154TFT-8.4 8,4 24 79 37 8,4
A1154TFT-8.5 8,5 24 79 37 8,5
A1154TFT-8.6 8,6 25 84 40 8,6
A1154TFT-8.7 8,7 25 84 40 8,7
A1154TFT-8.8 8,8 25 84 40 8,8
A1154TFT-8.9 8,9 25 84 40 8,9
A1154TFT-9 9 25 84 40 9
A1154TFT-9.1 9,1 25 84 40 9,1
A1154TFT-9.2 9,2 25 84 40 9,2
A1154TFT-9.3 9,3 25 84 40 9,3
A1154TFT-9.4 9,4 25 84 40 9,4
A1154TFT-9.5 9,5 25 84 40 9,5
A1154TFT-9.6 9,6 27 89 43 9,6
A1154TFT-9.7 9,7 27 89 43 9,7
A1154TFT-9.8 9,8 27 89 43 9,8
A1154TFT-9.9 9,9 27 89 43 9,9
A1154TFT-10 10 27 89 43 10
A1154TFT-10.2 10,2 27 89 43 10,2
A1154TFT-10.3 10,3 27 89 43 10,3
A1154TFT-10.5 10,5 27 89 43 10,5
A1154TFT-10.6 10,6 27 89 43 10,6
A1154TFT-10.7 10,7 29 95 47 10,7
A1154TFT-10.8 10,8 29 95 47 10,8
A1154TFT-10.9 10,9 29 95 47 10,9
A1154TFT-11 11 29 95 47 11
A1154TFT-11.1 11,1 29 95 47 11,1
A1154TFT-11.2 11,2 29 95 47 11,2
A1154TFT-11.3 11,3 29 95 47 11,3
A1154TFT-11.5 11,5 29 95 47 11,5
A1154TFT-11.6 11,6 29 95 47 11,6
A1154TFT-11.8 11,8 29 95 47 11,8
A1154TFT-11.9 11,9 37 102 51 11,9
A1154TFT-12 12 37 102 51 12
A1154TFT-12.1 12,1 37 102 51 12,1
A1154TFT-12.3 12,3 37 102 51 12,3
A1154TFT-12.5 12,5 37 102 51 12,5
A1154TFT-12.6 12,6 37 102 51 12,6
A1154TFT-12.7 12,7 37 102 51 12,7
A1154TFT-13 13 37 102 51 13
A1154TFT-13.1 13,1 37 102 51 13,1
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
TFT mm mm mm mm mm
Parallel shank A1154TFT-13.2 13,2 37 102 51 13,2
A1154TFT-13.3 13,3 40 107 54 13,3
Dc d1 A1154TFT-13.4 13,4 40 107 54 13,4
A1154TFT-13.5 13,5 40 107 54 13,5
Lc
A1154TFT-13.6 13,6 40 107 54 13,6
l2
l1 A1154TFT-14 14 40 107 54 14
A1154TFT-14.1 14,1 41 111 56 14,1
A1154TFT-14.2 14,2 41 111 56 14,2
A1154TFT-14.5 14,5 41 111 56 14,5
A1154TFT-14.8 14,8 41 111 56 14,8
A1154TFT-15 15 41 111 56 15
A1154TFT-15.1 15,1 42 115 58 15,1
A1154TFT-15.2 15,2 42 115 58 15,2
A1154TFT-15.3 15,3 42 115 58 15,3
A1154TFT-15.4 15,4 42 115 58 15,4
A1154TFT-15.5 15,5 42 115 58 15,5
A1154TFT-15.8 15,8 42 115 58 15,8
A1154TFT-16 16 42 115 58 16
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
A1148
UFL®
– Uncoated up to 1.9 mm DIN

~3×Dc 1897
130°
P M K N S H O
Uncoated CC CC CC CC CC C
Dc d1
Uncoated mm inches/no. mm mm mm mm
A1148-NO60 1,016 No. 60 4 26 6 1,016
Dc d1 A1148-NO59 1,041 No. 59 4 26 6 1,041
A1148-NO58 1,067 No. 58 5 28 7 1,067
Lc
A1148-NO57 1,092 No. 57 5 28 7 1,092
l2
l1 A1148-1.1 1,1 5 28 7 1,1
A1148-NO56 1,181 No. 56 6 30 8 1,181
A1148-3/64IN 1,191 3/64“ 6 30 8 1,191
A1148-1.2 1,2 6 30 8 1,2
A1148-1.3 1,3 6 30 8 1,3
A1148-NO55 1,321 No. 55 6 32 9 1,321
A1148-NO54 1,397 No. 54 6 32 9 1,397
A1148-1.4 1,4 6 32 9 1,4
A1148-1.5 1,5 6 32 9 1,5
A1148-NO53 1,511 No. 53 7 34 10 1,511
A1148-1/16IN 1,588 1/16“ 7 34 10 1,588
A1148-1.6 1,6 7 34 10 1,6
A1148-NO52 1,613 No. 52 7 34 10 1,613
A1148-1.7 1,7 7 34 10 1,7
A1148-NO51 1,702 No. 51 8 36 11 1,702
A1148-NO50 1,778 No. 50 8 36 11 1,778
A1148-1.8 1,8 8 36 11 1,8
A1148-NO49 1,854 No. 49 8 36 11 1,854
A1148-1.9 1,9 8 36 11 1,9
A1148-NO48 1,93 No. 48 8 38 12 1,93
A1148-5/64IN 1,984 5/64“ 8 38 12 1,984
A1148-NO47 1,994 No. 47 8 38 12 1,994
A1148-2 2 8 38 12 2
A1148-NO46 2,057 No. 46 8 38 12 2,057
A1148-NO45 2,083 No. 45 8 38 12 2,083
A1148-2.1 2,1 8 38 12 2,1
A1148-NO44 2,184 No. 44 9 40 13 2,184
A1148-2.2 2,2 9 40 13 2,2
A1148-NO43 2,261 No. 43 9 40 13 2,261
A1148-2.3 2,3 9 40 13 2,3
A1148-NO42 2,375 No. 42 10 43 14 2,375
A1148-3/32IN 2,381 3/32“ 10 43 14 2,381
A1148-2.4 2,4 10 43 14 2,4
A1148-NO41 2,438 No. 41 10 43 14 2,438
A1148-NO40 2,489 No. 40 10 43 14 2,489
A1148-2.5 2,5 10 43 14 2,5
A1148-NO39 2,527 No. 39 10 43 14 2,527
A1148-NO38 2,578 No. 38 10 43 14 2,578
A1148-2.6 2,6 10 43 14 2,6
A1148-NO37 2,642 No. 37 10 43 14 2,642
A1148-2.7 2,7 11 46 16 2,7
A1148-NO36 2,705 No. 36 11 46 16 2,705
A1148-7/64IN 2,778 7/64“ 11 46 16 2,778
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1148-NO35 2,794 No. 35 11 46 16 2,794
A1148-2.8 2,8 11 46 16 2,8
Dc d1 A1148-NO34 2,819 No. 34 11 46 16 2,819
A1148-NO33 2,87 No. 33 11 46 16 2,87
Lc
A1148-2.9 2,9 11 46 16 2,9
l2
l1 A1148-NO32 2,946 No. 32 11 46 16 2,946
A1148-3 3 11 46 16 3
A1148-NO31 3,048 No. 31 12 49 18 3,048
A1148-3.1 3,1 12 49 18 3,1
A1148-1/8IN 3,175 1/8“ 12 49 18 3,175
A1148-3.2 3,2 12 49 18 3,2
A1148-NO30 3,264 No. 30 12 49 18 3,264
A1148-3.3 3,3 12 49 18 3,3
A1148-3.4 3,4 14 52 20 3,4
A1148-NO29 3,454 No. 29 14 52 20 3,454
A1148-3.5 3,5 14 52 20 3,5
A1148-NO28 3,569 No. 28 14 52 20 3,569
A1148-9/64IN 3,572 9/64“ 14 52 20 3,572
A1148-3.6 3,6 14 52 20 3,6
A1148-NO27 3,658 No. 27 14 52 20 3,658
A1148-3.7 3,7 14 52 20 3,7
A1148-NO26 3,734 No. 26 14 52 20 3,734
A1148-NO25 3,797 No. 25 15 55 22 3,797
A1148-3.8 3,8 15 55 22 3,8
A1148-NO24 3,861 No. 24 15 55 22 3,861
A1148-3.9 3,9 15 55 22 3,9
A1148-NO23 3,912 No. 23 15 55 22 3,912
A1148-5/32IN 3,969 5/32“ 15 55 22 3,969
A1148-NO22 3,988 No. 22 15 55 22 3,988
A1148-4 4 15 55 22 4
A1148-NO21 4,039 No. 21 15 55 22 4,039
A1148-NO20 4,089 No. 20 15 55 22 4,089
A1148-4.1 4,1 15 55 22 4,1
A1148-4.2 4,2 15 55 22 4,2
A1148-NO19 4,216 No. 19 15 55 22 4,216
A1148-4.3 4,3 16 58 24 4,3
A1148-NO18 4,305 No. 18 16 58 24 4,305
A1148-11/64IN 4,366 11/64“ 16 58 24 4,366
A1148-NO17 4,394 No. 17 16 58 24 4,394
A1148-4.4 4,4 16 58 24 4,4
A1148-NO16 4,496 No. 16 16 58 24 4,496
A1148-4.5 4,5 16 58 24 4,5
A1148-NO15 4,572 No. 15 16 58 24 4,572
A1148-4.6 4,6 16 58 24 4,6
A1148-NO14 4,623 No. 14 16 58 24 4,623
A1148-NO13 4,699 No. 13 16 58 24 4,699
A1148-4.7 4,7 16 58 24 4,7
A1148-3/16IN 4,763 3/16“ 18 62 26 4,763
A1148-4.8 4,8 18 62 26 4,8
A1148-NO12 4,801 No. 12 18 62 26 4,801
A1148-NO11 4,851 No. 11 18 62 26 4,851
A1148-4.9 4,9 18 62 26 4,9
A1148-NO10 4,915 No. 10 18 62 26 4,915
A1148-NO9 4,978 No. 09 18 62 26 4,978
A1148-5 5 18 62 26 5
A1148-NO8 5,055 No. 08 18 62 26 5,055
A1148-5.1 5,1 18 62 26 5,1
A1148-NO7 5,105 No. 07 18 62 26 5,105
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1148-NO6 5,182 No. 06 18 62 26 5,182
Dc d1 A1148-5.2 5,2 18 62 26 5,2
A1148-NO5 5,22 No. 05 18 62 26 5,22
Lc
A1148-5.3 5,3 18 62 26 5,3
l2
l1 A1148-NO4 5,309 No. 04 19 66 28 5,309
A1148-5.4 5,4 19 66 28 5,4
A1148-NO3 5,41 No. 03 19 66 28 5,41
A1148-5.5 5,5 19 66 28 5,5
A1148-7/32IN 5,556 7/32“ 19 66 28 5,556
A1148-5.6 5,6 19 66 28 5,6
A1148-NO2 5,613 No. 02 19 66 28 5,613
A1148-5.7 5,7 19 66 28 5,7
A1148-NO1 5,791 No. 01 19 66 28 5,791
A1148-5.8 5,8 19 66 28 5,8
A1148-5.9 5,9 19 66 28 5,9
A1148-LET.A 5,944 Let.A 19 66 28 5,944
A1148-15/64IN 5,953 15/64“ 19 66 28 5,953
A1148-6 6 19 66 28 6
A1148-LET.B 6,045 Let.B 20 70 31 6,045
A1148-6.1 6,1 20 70 31 6,1
A1148-LET.C 6,147 Let.C 20 70 31 6,147
A1148-6.2 6,2 20 70 31 6,2
A1148-LET.D 6,248 Let.D 20 70 31 6,248
A1148-6.3 6,3 20 70 31 6,3
A1148-1/4IN 6,35 1/4“ 20 70 31 6,35
A1148-6.4 6,4 20 70 31 6,4
A1148-6.5 6,5 20 70 31 6,5
A1148-LET.F 6,528 Let.F 20 70 31 6,528
A1148-6.6 6,6 20 70 31 6,6
A1148-LET.G 6,629 Let.G 20 70 31 6,629
A1148-6.7 6,7 20 70 31 6,7
A1148-17/64IN 6,747 17/64“ 22 74 34 6,747
A1148-LET.H 6,756 Let.H 22 74 34 6,756
A1148-6.8 6,8 22 74 34 6,8
A1148-6.9 6,9 22 74 34 6,9
A1148-LET.I 6,909 Let.I 22 74 34 6,909
A1148-7 7 22 74 34 7
A1148-LET.J 7,036 Let.J 22 74 34 7,036
A1148-7.1 7,1 22 74 34 7,1
A1148-LET.K 7,137 Let.K 22 74 34 7,137
A1148-9/32IN 7,144 9/32“ 22 74 34 7,144
A1148-7.2 7,2 22 74 34 7,2
A1148-7.3 7,3 22 74 34 7,3
A1148-LET.L 7,366 Let.L 22 74 34 7,366
A1148-7.4 7,4 22 74 34 7,4
A1148-LET.M 7,493 Let.M 22 74 34 7,493
A1148-7.5 7,5 22 74 34 7,5
A1148-19/64IN 7,541 19/64“ 24 79 37 7,541
A1148-7.6 7,6 24 79 37 7,6
A1148-LET.N 7,671 Let.N 24 79 37 7,671
A1148-7.7 7,7 24 79 37 7,7
A1148-7.8 7,8 24 79 37 7,8
A1148-7.9 7,9 24 79 37 7,9
A1148-5/16IN 7,938 5/16“ 24 79 37 7,938
A1148-8 8 24 79 37 8
A1148-LET.O 8,026 Let.O 24 79 37 8,026
A1148-8.1 8,1 24 79 37 8,1
A1148-8.2 8,2 24 79 37 8,2
A1148-LET.P 8,204 Let.P 24 79 37 8,204
A1148-8.3 8,3 24 79 37 8,3
A1148-21/64IN 8,334 21/64“ 24 79 37 8,334
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1148-8.4 8,4 24 79 37 8,4
A1148-LET.Q 8,433 Let.Q 24 79 37 8,433
Dc d1 A1148-8.5 8,5 24 79 37 8,5
A1148-8.6 8,6 25 84 40 8,6
Lc
A1148-LET.R 8,611 Let.R 25 84 40 8,611
l2
l1 A1148-8.7 8,7 25 84 40 8,7
A1148-11/32IN 8,731 11/32“ 25 84 40 8,731
A1148-8.8 8,8 25 84 40 8,8
A1148-LET.S 8,839 Let.S 25 84 40 8,839
A1148-8.9 8,9 25 84 40 8,9
A1148-9 9 25 84 40 9
A1148-LET.T 9,093 Let.T 25 84 40 9,093
A1148-9.1 9,1 25 84 40 9,1
A1148-23/64IN 9,128 23/64“ 25 84 40 9,128
A1148-9.2 9,2 25 84 40 9,2
A1148-9.3 9,3 25 84 40 9,3
A1148-LET.U 9,347 Let.U 25 84 40 9,347
A1148-9.4 9,4 25 84 40 9,4
A1148-9.5 9,5 25 84 40 9,5
A1148-3/8IN 9,525 3/8“ 27 89 43 9,525
A1148-LET.V 9,576 Let.V 27 89 43 9,576
A1148-9.6 9,6 27 89 43 9,6
A1148-9.7 9,7 27 89 43 9,7
A1148-9.8 9,8 27 89 43 9,8
A1148-LET.W 9,804 Let.W 27 89 43 9,804
A1148-9.9 9,9 27 89 43 9,9
A1148-25/64IN 9,922 25/64“ 27 89 43 9,922
A1148-10 10 27 89 43 10
A1148-LET.X 10,084 Let.X 27 89 43 10,084
A1148-10.2 10,2 27 89 43 10,2
A1148-LET.Y 10,262 Let.Y 27 89 43 10,262
A1148-13/32IN 10,319 13/32“ 27 89 43 10,319
A1148-LET.Z 10,49 Let.Z 27 89 43 10,49
A1148-10.5 10,5 27 89 43 10,5
A1148-27/64IN 10,716 27/64“ 29 95 47 10,716
A1148-10.8 10,8 29 95 47 10,8
A1148-11 11 29 95 47 11
A1148-7/16IN 11,113 7/16“ 29 95 47 11,113
A1148-11.2 11,2 29 95 47 11,2
A1148-11.5 11,5 29 95 47 11,5
A1148-29/64IN 11,509 29/64“ 29 95 47 11,509
A1148-11.8 11,8 29 95 47 11,8
A1148-15/32IN 11,906 15/32“ 37 102 51 11,906
A1148-12 12 37 102 51 12
A1148-31/64IN 12,303 31/64“ 37 102 51 12,303
A1148-12.5 12,5 37 102 51 12,5
A1148-1/2IN 12,7 1/2“ 37 102 51 12,7
A1148-12.8 12,8 37 102 51 12,8
A1148-13 13 37 102 51 13
A1148-33/64IN 13,097 33/64“ 37 102 51 13,097
A1148-13.3 13,3 40 107 54 13,3
A1148-17/32IN 13,494 17/32“ 40 107 54 13,494
A1148-13.5 13,5 40 107 54 13,5
A1148-35/64IN 13,891 35/64“ 40 107 54 13,891
A1148-14 14 40 107 54 14
A1148-9/16IN 14,288 9/16“ 41 111 56 14,288
A1148-14.5 14,5 41 111 56 14,5
A1148-37/64IN 14,684 37/64“ 41 111 56 14,684
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1148-15 15 41 111 56 15
A1148-19/32IN 15,081 19/32“ 42 115 58 15,081
Dc d1 A1148-15.3 15,3 42 115 58 15,3
A1148-39/64IN 15,478 39/64“ 42 115 58 15,478
Lc
A1148-15.5 15,5 42 115 58 15,5
l2
l1 A1148-5/8IN 15,875 5/8“ 42 115 58 15,875
A1148-16 16 42 115 58 16
A1148-41/64IN 16,272 41/64“ 43 119 60 16,272
A1148-16.5 16,5 43 119 60 16,5
A1148-21/32IN 16,669 21/32“ 43 119 60 16,669
A1148-17 17 43 119 60 17
A1148-43/64IN 17,066 43/64“ 44 123 62 17,066
A1148-11/16IN 17,463 11/16“ 44 123 62 17,463
A1148-17.5 17,5 44 123 62 17,5
A1148-45/64IN 17,859 45/64“ 44 123 62 17,859
A1148-18 18 44 123 62 18
A1148-23/32IN 18,256 23/32“ 45 127 64 18,256
A1148-18.5 18,5 45 127 64 18,5
A1148-47/64IN 18,653 47/64“ 45 127 64 18,653
A1148-19 19 45 127 64 19
A1148-3/4IN 19,05 3/4“ 46 131 66 19,05
A1148-19.5 19,5 46 131 66 19,5
A1148-20 20 46 131 66 20
XIII D1 B 474 B 482

Solid drilling
B1
HSS twist drills, extra short (Stub)
A1111
– Uncoated up to 3 mm
– Type N DIN
~3×Dc 1897
118°
P M K N S H O
Uncoated CC C CC C C C
Dc d1
Parallel shank A1111-0.5 0,5 2,2 20 3 0,5
A1111-0.6 0,6 2,6 21 3,5 0,6
Dc d1 A1111-0.7 0,7 3,3 23 4,5 0,7
A1111-0.8 0,8 3,7 24 5 0,8
Lc A1111-0.9 0,9 4 25 5,5 0,9
l2
l1 A1111-1 1 4 26 6 1
A1111-1.05 1,05 4 26 6 1,05
A1111-1.1 1,1 5 28 7 1,1
A1111-1.15 1,15 5 28 7 1,15
A1111-1.2 1,2 6 30 8 1,2
A1111-1.25 1,25 6 30 8 1,25
A1111-1.3 1,3 6 30 8 1,3
A1111-1.35 1,35 6 32 9 1,35
A1111-1.4 1,4 6 32 9 1,4
A1111-1.45 1,45 6 32 9 1,45
A1111-1.5 1,5 6 32 9 1,5
A1111-1.55 1,55 7 34 10 1,55
A1111-1.6 1,6 7 34 10 1,6
A1111-1.65 1,65 7 34 10 1,65
A1111-1.7 1,7 7 34 10 1,7
A1111-1.75 1,75 8 36 11 1,75
A1111-1.8 1,8 8 36 11 1,8
A1111-1.85 1,85 8 36 11 1,85
A1111-1.9 1,9 8 36 11 1,9
A1111-1.95 1,95 8 38 12 1,95
A1111-2 2 8 38 12 2
A1111-2.05 2,05 8 38 12 2,05
A1111-2.1 2,1 8 38 12 2,1
A1111-2.15 2,15 9 40 13 2,15
A1111-2.2 2,2 9 40 13 2,2
A1111-2.25 2,25 9 40 13 2,25
A1111-2.3 2,3 9 40 13 2,3
A1111-2.35 2,35 9 40 13 2,35
A1111-2.4 2,4 10 43 14 2,4
A1111-2.45 2,45 10 43 14 2,45
A1111-2.5 2,5 10 43 14 2,5
A1111-2.55 2,55 10 43 14 2,55
A1111-2.6 2,6 10 43 14 2,6
A1111-2.65 2,65 10 43 14 2,65
A1111-2.7 2,7 11 46 16 2,7
A1111-2.75 2,75 11 46 16 2,75
A1111-2.8 2,8 11 46 16 2,8
A1111-2.85 2,85 11 46 16 2,85
A1111-2.9 2,9 11 46 16 2,9
Continued
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1111-2.95 2,95 11 46 16 2,95
A1111-3 3 11 46 16 3
Dc d1 A1111-3.1 3,1 12 49 18 3,1
A1111-3.2 3,2 12 49 18 3,2
Lc A1111-3.25 3,25 12 49 18 3,25
l2
l1 A1111-3.3 3,3 12 49 18 3,3
A1111-3.4 3,4 14 52 20 3,4
A1111-3.5 3,5 14 52 20 3,5
A1111-3.6 3,6 14 52 20 3,6
A1111-3.7 3,7 14 52 20 3,7
A1111-3.8 3,8 15 55 22 3,8
A1111-3.9 3,9 15 55 22 3,9
A1111-4 4 15 55 22 4
A1111-4.1 4,1 15 55 22 4,1
A1111-4.2 4,2 15 55 22 4,2
A1111-4.25 4,25 15 55 22 4,25
A1111-4.3 4,3 16 58 24 4,3
A1111-4.4 4,4 16 58 24 4,4
A1111-4.5 4,5 16 58 24 4,5
A1111-4.6 4,6 16 58 24 4,6
A1111-4.7 4,7 16 58 24 4,7
A1111-4.75 4,75 16 58 24 4,75
A1111-4.8 4,8 18 62 26 4,8
A1111-4.9 4,9 18 62 26 4,9
A1111-5 5 18 62 26 5
A1111-5.1 5,1 18 62 26 5,1
A1111-5.2 5,2 18 62 26 5,2
A1111-5.25 5,25 18 62 26 5,25
A1111-5.3 5,3 18 62 26 5,3
A1111-5.4 5,4 19 66 28 5,4
A1111-5.5 5,5 19 66 28 5,5
A1111-5.6 5,6 19 66 28 5,6
A1111-5.7 5,7 19 66 28 5,7
A1111-5.75 5,75 19 66 28 5,75
A1111-5.8 5,8 19 66 28 5,8
A1111-5.9 5,9 19 66 28 5,9
A1111-6 6 19 66 28 6
A1111-6.1 6,1 20 70 31 6,1
A1111-6.2 6,2 20 70 31 6,2
A1111-6.3 6,3 20 70 31 6,3
A1111-6.4 6,4 20 70 31 6,4
A1111-6.5 6,5 20 70 31 6,5
A1111-6.6 6,6 20 70 31 6,6
A1111-6.7 6,7 20 70 31 6,7
A1111-6.75 6,75 22 74 34 6,75
A1111-6.8 6,8 22 74 34 6,8
A1111-6.9 6,9 22 74 34 6,9
A1111-7 7 22 74 34 7
A1111-7.1 7,1 22 74 34 7,1
A1111-7.2 7,2 22 74 34 7,2
A1111-7.3 7,3 22 74 34 7,3
A1111-7.4 7,4 22 74 34 7,4
A1111-7.5 7,5 22 74 34 7,5
A1111-7.6 7,6 24 79 37 7,6
A1111-7.7 7,7 24 79 37 7,7
A1111-7.75 7,75 24 79 37 7,75
A1111-7.8 7,8 24 79 37 7,8
A1111-7.9 7,9 24 79 37 7,9
A1111-8 8 24 79 37 8
A1111-8.1 8,1 24 79 37 8,1
A1111-8.2 8,2 24 79 37 8,2
A1111-8.25 8,25 24 79 37 8,25
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1111-8.3 8,3 24 79 37 8,3
A1111-8.4 8,4 24 79 37 8,4
Dc d1 A1111-8.5 8,5 24 79 37 8,5
A1111-8.6 8,6 25 84 40 8,6
Lc A1111-8.7 8,7 25 84 40 8,7
l2
l1 A1111-8.8 8,8 25 84 40 8,8
A1111-8.9 8,9 25 84 40 8,9
A1111-9 9 25 84 40 9
A1111-9.1 9,1 25 84 40 9,1
A1111-9.2 9,2 25 84 40 9,2
A1111-9.3 9,3 25 84 40 9,3
A1111-9.4 9,4 25 84 40 9,4
A1111-9.5 9,5 25 84 40 9,5
A1111-9.6 9,6 27 89 43 9,6
A1111-9.7 9,7 27 89 43 9,7
A1111-9.8 9,8 27 89 43 9,8
A1111-9.9 9,9 27 89 43 9,9
A1111-10 10 27 89 43 10
A1111-10.1 10,1 27 89 43 10,1
A1111-10.2 10,2 27 89 43 10,2
A1111-10.3 10,3 27 89 43 10,3
A1111-10.4 10,4 27 89 43 10,4
A1111-10.5 10,5 27 89 43 10,5
A1111-10.6 10,6 27 89 43 10,6
A1111-10.7 10,7 29 95 47 10,7
A1111-10.8 10,8 29 95 47 10,8
A1111-10.9 10,9 29 95 47 10,9
A1111-11 11 29 95 47 11
A1111-11.1 11,1 29 95 47 11,1
A1111-11.2 11,2 29 95 47 11,2
A1111-11.3 11,3 29 95 47 11,3
A1111-11.4 11,4 29 95 47 11,4
A1111-11.5 11,5 29 95 47 11,5
A1111-11.6 11,6 29 95 47 11,6
A1111-11.7 11,7 29 95 47 11,7
A1111-11.8 11,8 29 95 47 11,8
A1111-11.9 11,9 37 102 51 11,9
A1111-12 12 37 102 51 12
A1111-12.1 12,1 37 102 51 12,1
A1111-12.2 12,2 37 102 51 12,2
A1111-12.3 12,3 37 102 51 12,3
A1111-12.4 12,4 37 102 51 12,4
A1111-12.5 12,5 37 102 51 12,5
A1111-12.6 12,6 37 102 51 12,6
A1111-12.7 12,7 37 102 51 12,7
A1111-12.8 12,8 37 102 51 12,8
A1111-12.9 12,9 37 102 51 12,9
A1111-13 13 37 102 51 13
A1111-13.1 13,1 37 102 51 13,1
A1111-13.2 13,2 37 102 51 13,2
A1111-13.3 13,3 40 107 54 13,3
A1111-13.4 13,4 40 107 54 13,4
A1111-13.5 13,5 40 107 54 13,5
A1111-13.6 13,6 40 107 54 13,6
A1111-13.7 13,7 40 107 54 13,7
A1111-13.8 13,8 40 107 54 13,8
A1111-13.9 13,9 40 107 54 13,9
A1111-14 14 40 107 54 14
Continued
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1111-14.1 14,1 41 111 56 14,1
A1111-14.2 14,2 41 111 56 14,2
Dc d1 A1111-14.3 14,3 41 111 56 14,3
A1111-14.4 14,4 41 111 56 14,4
Lc A1111-14.5 14,5 41 111 56 14,5
l2
l1 A1111-14.6 14,6 41 111 56 14,6
A1111-14.7 14,7 41 111 56 14,7
A1111-14.8 14,8 41 111 56 14,8
A1111-14.9 14,9 41 111 56 14,9
A1111-15 15 41 111 56 15
A1111-15.5 15,5 42 115 58 15,5
A1111-16 16 42 115 58 16
A1111-16.5 16,5 43 119 60 16,5
A1111-17 17 43 119 60 17
A1111-17.5 17,5 44 123 62 17,5
A1111-18 18 44 123 62 18
A1111-18.5 18,5 45 127 64 18,5
A1111-19 19 45 127 64 19
A1111-19.5 19,5 46 131 66 19,5
A1111-20 20 46 131 66 20
A1111-20.5 20,5 46 136 68 20,5
A1111-21 21 46 136 68 21
A1111-21.5 21,5 47 141 70 21,5
A1111-22 22 47 141 70 22
A1111-22.5 22,5 48 146 72 22,5
A1111-23 23 48 146 72 23
A1111-23.5 23,5 48 146 72 23,5
A1111-24 24 50 151 75 24
A1111-24.5 24,5 50 151 75 24,5
A1111-25 25 50 151 75 25
A1111-25.5 25,5 51 156 78 25,5
A1111-26 26 51 156 78 26
A1111-26.5 26,5 51 156 78 26,5
A1111-27 27 53 162 81 27
A1111-27.5 27,5 53 162 81 27,5
A1111-28 28 53 162 81 28
A1111-28.5 28,5 54 168 84 28,5
A1111-29 29 54 168 84 29
A1111-29.5 29,5 54 168 84 29,5
A1111-30 30 54 168 84 30
A1111-31 31 55 174 87 31
A1111-32 32 56 180 90 32
D1 B 474 B 482

Solid drilling
B1
A2258
UFL®
– Overall length DIN 1897, flutes extended compared to DIN 1897 ~3×Dc
130° LH
P M K N S H O
Dc d1
A2258-NO60 1,016 No. 60 6 26 8 1,016
Dc d1 A2258-1.1 1,1 7 28 9 1,1
A2258-1.2 1,2 8 30 10 1,2
Lc
A2258-1.3 1,3 8 30 10 1,3
l2
l1 A2258-NO55 1,321 No. 55 9 32 12 1,321
A2258-NO54 1,397 No. 54 9 32 12 1,397
A2258-1.4 1,4 9 32 12 1,4
A2258-1.5 1,5 9 32 12 1,5
A2258-NO53 1,511 No. 53 10 34 13 1,511
A2258-1/16IN 1,588 1/16“ 10 34 13 1,588
A2258-1.6 1,6 10 34 13 1,6
A2258-NO52 1,613 No. 52 10 34 13 1,613
A2258-1.7 1,7 10 34 13 1,7
A2258-NO50 1,778 No. 50 11 36 14 1,778
A2258-1.8 1,8 11 36 14 1,8
A2258-NO49 1,854 No. 49 11 36 14 1,854
A2258-1.9 1,9 11 36 14 1,9
A2258-NO48 1,93 No. 48 12 38 16 1,93
A2258-5/64IN 1,984 5/64“ 12 38 16 1,984
A2258-2 2 12 38 16 2
A2258-NO46 2,057 No. 46 12 38 16 2,057
A2258-2.1 2,1 12 38 16 2,1
A2258-2.2 2,2 13 40 17 2,2
A2258-NO43 2,261 No. 43 13 40 17 2,261
A2258-2.3 2,3 13 40 17 2,3
A2258-NO42 2,375 No. 42 14 43 18 2,375
A2258-3/32IN 2,381 3/32“ 14 43 18 2,381
A2258-2.4 2,4 14 43 18 2,4
A2258-NO41 2,438 No. 41 14 43 18 2,438
A2258-NO40 2,489 No. 40 14 43 18 2,489
A2258-2.5 2,5 14 43 18 2,5
A2258-NO38 2,578 No. 38 14 43 18 2,578
A2258-2.6 2,6 14 43 18 2,6
A2258-2.7 2,7 16 46 21 2,7
A2258-NO36 2,705 No. 36 16 46 21 2,705
A2258-7/64IN 2,778 7/64“ 16 46 21 2,778
A2258-NO35 2,794 No. 35 16 46 21 2,794
A2258-2.8 2,8 16 46 21 2,8
A2258-NO33 2,87 No. 33 16 46 21 2,87
A2258-2.9 2,9 16 46 21 2,9
A2258-3 3 16 46 21 3
A2258-NO31 3,048 No. 31 17 49 23 3,048
A2258-3.1 3,1 17 49 23 3,1
Continued
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A2258-3.2 3,2 17 49 23 3,2
Dc d1 A2258-3.3 3,3 17 49 23 3,3
A2258-3.4 3,4 20 52 26 3,4
Lc
A2258-NO29 3,454 No. 29 20 52 26 3,454
l2
l1 A2258-3.5 3,5 20 52 26 3,5
A2258-9/64IN 3,572 9/64“ 20 52 26 3,572
A2258-3.6 3,6 20 52 26 3,6
A2258-NO27 3,658 No. 27 20 52 26 3,658
A2258-3.7 3,7 20 52 26 3,7
A2258-NO26 3,734 No. 26 20 52 26 3,734
A2258-NO25 3,797 No. 25 22 55 29 3,797
A2258-3.8 3,8 22 55 29 3,8
A2258-NO24 3,861 No. 24 22 55 29 3,861
A2258-3.9 3,9 22 55 29 3,9
A2258-5/32IN 3,969 5/32“ 22 55 29 3,969
A2258-NO22 3,988 No. 22 22 55 29 3,988
A2258-4 4 22 55 29 4
A2258-NO21 4,039 No. 21 22 55 29 4,039
A2258-NO20 4,089 No. 20 22 55 29 4,089
A2258-4.1 4,1 22 55 29 4,1
A2258-4.2 4,2 22 55 29 4,2
A2258-NO19 4,216 No. 19 22 55 29 4,216
A2258-4.3 4,3 23 58 31 4,3
A2258-NO18 4,305 No. 18 23 58 31 4,305
A2258-11/64IN 4,366 11/64“ 23 58 31 4,366
A2258-NO17 4,394 No. 17 23 58 31 4,394
A2258-4.4 4,4 23 58 31 4,4
A2258-NO16 4,496 No. 16 23 58 31 4,496
A2258-4.5 4,5 23 58 31 4,5
A2258-NO15 4,572 No. 15 23 58 31 4,572
A2258-4.6 4,6 23 58 31 4,6
A2258-NO14 4,623 No. 14 23 58 31 4,623
A2258-4.7 4,7 23 58 31 4,7
A2258-3/16IN 4,763 3/16“ 26 62 34 4,763
A2258-4.8 4,8 26 62 34 4,8
A2258-NO12 4,801 No. 12 26 62 34 4,801
A2258-NO11 4,851 No. 11 26 62 34 4,851
A2258-4.9 4,9 26 62 34 4,9
A2258-NO10 4,915 No. 10 26 62 34 4,915
A2258-NO9 4,978 No. 09 26 62 34 4,978
A2258-5 5 26 62 34 5
A2258-5.1 5,1 26 62 34 5,1
A2258-NO7 5,105 No. 07 26 62 34 5,105
A2258-13/64IN 5,159 13/64“ 26 62 34 5,159
A2258-NO6 5,182 No. 06 26 62 34 5,182
A2258-5.2 5,2 26 62 34 5,2
A2258-NO5 5,22 No. 05 26 62 34 5,22
A2258-5.3 5,3 26 62 34 5,3
A2258-NO4 5,309 No. 04 27 66 36 5,309
A2258-5.4 5,4 27 66 36 5,4
A2258-5.5 5,5 27 66 36 5,5
A2258-7/32IN 5,556 7/32“ 27 66 36 5,556
A2258-5.6 5,6 27 66 36 5,6
A2258-5.7 5,7 27 66 36 5,7
A2258-NO1 5,791 No. 01 27 66 36 5,791
A2258-5.8 5,8 27 66 36 5,8
A2258-5.9 5,9 27 66 36 5,9
A2258-6 6 27 66 36 6
A2258-6.1 6,1 29 70 40 6,1
A2258-6.2 6,2 29 70 40 6,2
A2258-6.3 6,3 29 70 40 6,3
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A2258-6.4 6,4 29 70 40 6,4
Dc d1 A2258-6.5 6,5 29 70 40 6,5
A2258-6.6 6,6 29 70 40 6,6
Lc
A2258-6.7 6,7 29 70 40 6,7
l2
l1 A2258-6.8 6,8 32 74 44 6,8
A2258-6.9 6,9 32 74 44 6,9
A2258-7 7 32 74 44 7
A2258-7.1 7,1 32 74 44 7,1
A2258-9/32IN 7,144 9/32“ 32 74 44 7,144
A2258-7.2 7,2 32 74 44 7,2
A2258-7.3 7,3 32 74 44 7,3
A2258-7.4 7,4 32 74 44 7,4
A2258-7.5 7,5 32 74 44 7,5
A2258-7.6 7,6 35 79 48 7,6
A2258-7.8 7,8 35 79 48 7,8
A2258-7.9 7,9 35 79 48 7,9
A2258-8 8 35 79 48 8
A2258-8.1 8,1 35 79 48 8,1
A2258-8.2 8,2 35 79 48 8,2
A2258-8.3 8,3 35 79 48 8,3
A2258-8.4 8,4 35 79 48 8,4
A2258-8.5 8,5 35 79 48 8,5
A2258-8.6 8,6 37 84 52 8,6
A2258-8.7 8,7 37 84 52 8,7
A2258-11/32IN 8,731 11/32“ 37 84 52 8,731
A2258-8.9 8,9 37 84 52 8,9
A2258-9 9 37 84 52 9
A2258-9.1 9,1 37 84 52 9,1
A2258-9.3 9,3 37 84 52 9,3
A2258-9.5 9,5 37 84 52 9,5
A2258-3/8IN 9,525 3/8“ 40 89 56 9,525
A2258-9.6 9,6 40 89 56 9,6
A2258-9.7 9,7 40 89 56 9,7
A2258-9.8 9,8 40 89 56 9,8
A2258-10 10 40 89 56 10
A2258-10.2 10,2 40 89 56 10,2
A2258-13/32IN 10,319 13/32“ 40 89 56 10,319
A2258-10.5 10,5 40 89 56 10,5
A2258-27/64IN 10,716 27/64“ 43 95 61 10,716
A2258-11 11 43 95 61 11
A2258-11.5 11,5 43 95 61 11,5
A2258-15/32IN 11,906 15/32“ 52 102 66 11,906
A2258-12 12 52 102 66 12
A2258-12.5 12,5 52 102 66 12,5
A2258-1/2IN 12,7 1/2“ 52 102 66 12,7
A2258-13 13 52 102 66 13
A2258-13.5 13,5 56 107 70 13,5
A2258-14 14 56 107 70 14
A2258-14.5 14,5 58 111 73 14,5
A2258-15 15 58 111 73 15
A2258-16 16 59 115 75 16
A2258-17 17 61 119 78 17
A2258-18 18 63 123 81 18
A2258-20 20 66 131 86 20
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
HSS-E micro drills
A3143
– Type ESU DIN

~5×Dc 1899
118°
P M K N S H O
Uncoated CC C CC CC CC C
Dc d1
Parallel shank A3143-0.05 0,05 0,2 25 0,3 1
A3143-0.06 0,06 0,2 25 0,3 1
Dc
A3143-0.07 0,07 0,2 25 0,4 1
d1
A3143-0.08 0,08 0,2 25 0,4 1
Lc A3143-0.09 0,09 0,2 25 0,4 1
l2 A3143-0.1 0,1 0,3 25 0,5 1
l1
A3143-0.11 0,11 0,3 25 0,5 1
A3143-0.12 0,12 0,3 25 0,5 1
A3143-0.13 0,13 0,5 25 0,8 1
A3143-0.14 0,14 0,5 25 0,8 1
A3143-0.15 0,15 0,5 25 0,8 1
A3143-0.16 0,16 0,8 25 1,1 1
A3143-0.17 0,17 0,8 25 1,1 1
A3143-0.18 0,18 0,8 25 1,1 1
A3143-0.19 0,19 0,8 25 1,1 1
A3143-0.2 0,2 1,1 25 1,5 1
A3143-0.21 0,21 1,1 25 1,5 1
A3143-0.22 0,22 1,1 25 1,5 1
A3143-0.23 0,23 1,1 25 1,5 1
A3143-0.24 0,24 1,1 25 1,5 1
A3143-0.25 0,25 1,4 25 1,9 1
A3143-0.26 0,26 1,4 25 1,9 1
A3143-0.27 0,27 1,4 25 1,9 1
A3143-0.28 0,28 1,4 25 1,9 1
A3143-0.29 0,29 1,4 25 1,9 1
A3143-0.3 0,3 1,4 25 1,9 1
A3143-0.31 0,31 1,8 25 2,4 1
A3143-0.32 0,32 1,8 25 2,4 1
A3143-0.33 0,33 1,8 25 2,4 1
A3143-0.34 0,34 1,8 25 2,4 1
A3143-0.35 0,35 1,8 25 2,4 1
A3143-0.36 0,36 1,8 25 2,4 1
A3143-0.37 0,37 1,8 25 2,4 1
A3143-0.38 0,38 1,8 25 2,4 1
A3143-0.39 0,39 2,2 25 3 1
A3143-0.4 0,4 2,2 25 3 1
A3143-0.41 0,41 2,2 25 3 1
A3143-0.42 0,42 2,2 25 3 1
A3143-0.43 0,43 2,2 25 3 1
A3143-0.44 0,44 2,2 25 3 1
A3143-0.45 0,45 2,2 25 3 1
A3143-0.46 0,46 2,2 25 3 1
A3143-0.47 0,47 2,2 25 3 1
A3143-0.48 0,48 2,2 25 3 1
A3143-0.49 0,49 2,6 25 3,4 1
A3143-0.5 0,5 2,6 25 3,4 1
A3143-0.51 0,51 2,6 25 3,4 1
A3143-0.52 0,52 2,6 25 3,4 1
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A3143-0.53 0,53 2,6 25 3,4 1
A3143-0.54 0,54 3 25 3,9 1
Dc
A3143-0.55 0,55 3 25 3,9 1
d1
A3143-0.56 0,56 3 25 3,9 1
Lc A3143-0.57 0,57 3 25 3,9 1
l2 A3143-0.58 0,58 3 25 3,9 1
l1
A3143-0.59 0,59 3 25 3,9 1
A3143-0.6 0,6 3 25 3,9 1
A3143-0.61 0,61 3,1 25 4,2 1
A3143-0.62 0,62 3,1 25 4,2 1
A3143-0.63 0,63 3,1 25 4,2 1
A3143-0.64 0,64 3,1 25 4,2 1
A3143-0.65 0,65 3,1 25 4,2 1
A3143-0.66 0,66 3,1 25 4,2 1
A3143-0.67 0,67 3,1 25 4,2 1
A3143-0.68 0,68 3,6 25 4,8 1
A3143-0.69 0,69 3,6 25 4,8 1
A3143-0.7 0,7 3,6 25 4,8 1
A3143-0.71 0,71 3,6 25 4,8 1
A3143-0.72 0,72 3,6 25 4,8 1
A3143-0.73 0,73 3,6 25 4,8 1
A3143-0.74 0,74 3,6 25 4,8 1
A3143-0.75 0,75 3,6 25 4,8 1
A3143-0.76 0,76 4,1 25 5,3 1
A3143-0.77 0,77 4,1 25 5,3 1
A3143-0.78 0,78 4,1 25 5,3 1
A3143-0.79 0,79 4,1 25 5,3 1
A3143-0.8 0,8 4 25 5,3 1,5
A3143-0.81 0,81 4 25 5,3 1,5
A3143-0.82 0,82 4 25 5,3 1,5
A3143-0.83 0,83 4 25 5,3 1,5
A3143-0.84 0,84 4 25 5,3 1,5
A3143-0.85 0,85 4 25 5,3 1,5
A3143-0.86 0,86 4,5 25 6 1,5
A3143-0.87 0,87 4,5 25 6 1,5
A3143-0.88 0,88 4,5 25 6 1,5
A3143-0.89 0,89 4,5 25 6 1,5
A3143-0.9 0,9 4,5 25 6 1,5
A3143-0.91 0,91 4,5 25 6 1,5
A3143-0.92 0,92 4,5 25 6 1,5
A3143-0.93 0,93 4,5 25 6 1,5
A3143-0.94 0,94 4,5 25 6 1,5
A3143-0.95 0,95 4,5 25 6 1,5
A3143-0.96 0,96 5 25 6,8 1,5
A3143-0.97 0,97 5 25 6,8 1,5
A3143-0.98 0,98 5 25 6,8 1,5
A3143-0.99 0,99 5 25 6,8 1,5
A3143-1 1 5 25 6,8 1,5
A3143-1.05 1,05 5 25 6,8 1,5
A3143-1.1 1,1 5 25 7,6 1,5
A3143-1.15 1,15 5 25 7,6 1,5
A3143-1.2 1,2 6 25 8,5 1,5
A3143-1.25 1,25 6 25 8,5 1,5
A3143-1.3 1,3 6 25 8,5 1,5
A3143-1.35 1,35 7 25 9,5 1,5
A3143-1.4 1,4 7 25 9,5 1,5
A3143-1.45 1,45 7 25 9,5 1,5
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
HSS-E micro drills
A3153
– Type ESU DIN

~5×Dc 1899
118° LH
P M K N S H O
Uncoated CC C CC CC CC C
Dc d1
Parallel shank A3153-0.15 0,15 0,5 25 0,8 1
A3153-0.16 0,16 0,8 25 1,1 1
Dc
A3153-0.17 0,17 0,8 25 1,1 1
d1
A3153-0.18 0,18 0,8 25 1,1 1
Lc A3153-0.19 0,19 0,8 25 1,1 1
l2 A3153-0.2 0,2 1,1 25 1,5 1
l1
A3153-0.21 0,21 1,1 25 1,5 1
A3153-0.22 0,22 1,1 25 1,5 1
A3153-0.23 0,23 1,1 25 1,5 1
A3153-0.24 0,24 1,1 25 1,5 1
A3153-0.25 0,25 1,4 25 1,9 1
A3153-0.26 0,26 1,4 25 1,9 1
A3153-0.27 0,27 1,4 25 1,9 1
A3153-0.28 0,28 1,4 25 1,9 1
A3153-0.29 0,29 1,4 25 1,9 1
A3153-0.3 0,3 1,4 25 1,9 1
A3153-0.31 0,31 1,8 25 2,4 1
A3153-0.32 0,32 1,8 25 2,4 1
A3153-0.33 0,33 1,8 25 2,4 1
A3153-0.34 0,34 1,8 25 2,4 1
A3153-0.35 0,35 1,8 25 2,4 1
A3153-0.36 0,36 1,8 25 2,4 1
A3153-0.37 0,37 1,8 25 2,4 1
A3153-0.38 0,38 1,8 25 2,4 1
A3153-0.39 0,39 2,2 25 3 1
A3153-0.4 0,4 2,2 25 3 1
A3153-0.41 0,41 2,2 25 3 1
A3153-0.42 0,42 2,2 25 3 1
A3153-0.43 0,43 2,2 25 3 1
A3153-0.44 0,44 2,2 25 3 1
A3153-0.45 0,45 2,2 25 3 1
A3153-0.46 0,46 2,2 25 3 1
A3153-0.47 0,47 2,2 25 3 1
A3153-0.48 0,48 2,2 25 3 1
A3153-0.49 0,49 2,6 25 3,4 1
A3153-0.5 0,5 2,6 25 3,4 1
A3153-0.51 0,51 2,6 25 3,4 1
A3153-0.52 0,52 2,6 25 3,4 1
A3153-0.53 0,53 2,6 25 3,4 1
A3153-0.54 0,54 3 25 3,9 1
A3153-0.55 0,55 3 25 3,9 1
A3153-0.56 0,56 3 25 3,9 1
A3153-0.57 0,57 3 25 3,9 1
A3153-0.58 0,58 3 25 3,9 1
A3153-0.59 0,59 3 25 3,9 1
A3153-0.6 0,6 3 25 3,9 1
A3153-0.61 0,61 3,1 25 4,2 1
A3153-0.62 0,62 3,1 25 4,2 1
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A3153-0.63 0,63 3,1 25 4,2 1
A3153-0.64 0,64 3,1 25 4,2 1
Dc
A3153-0.65 0,65 3,1 25 4,2 1
d1
A3153-0.66 0,66 3,1 25 4,2 1
Lc A3153-0.67 0,67 3,1 25 4,2 1
l2 A3153-0.68 0,68 3,6 25 4,8 1
l1
A3153-0.69 0,69 3,6 25 4,8 1
A3153-0.7 0,7 3,6 25 4,8 1
A3153-0.71 0,71 3,6 25 4,8 1
A3153-0.72 0,72 3,6 25 4,8 1
A3153-0.73 0,73 3,6 25 4,8 1
A3153-0.74 0,74 3,6 25 4,8 1
A3153-0.75 0,75 3,6 25 4,8 1
A3153-0.76 0,76 4,1 25 5,3 1
A3153-0.77 0,77 4,1 25 5,3 1
A3153-0.78 0,78 4,1 25 5,3 1
A3153-0.79 0,79 4,1 25 5,3 1
A3153-0.8 0,8 4 25 5,3 1,5
A3153-0.81 0,81 4 25 5,3 1,5
A3153-0.82 0,82 4 25 5,3 1,5
A3153-0.83 0,83 4 25 5,3 1,5
A3153-0.84 0,84 4 25 5,3 1,5
A3153-0.85 0,85 4 25 5,3 1,5
A3153-0.86 0,86 4,5 25 6 1,5
A3153-0.87 0,87 4,5 25 6 1,5
A3153-0.88 0,88 4,5 25 6 1,5
A3153-0.89 0,89 4,5 25 6 1,5
A3153-0.9 0,9 4,5 25 6 1,5
A3153-0.91 0,91 4,5 25 6 1,5
A3153-0.92 0,92 4,5 25 6 1,5
A3153-0.93 0,93 4,5 25 6 1,5
A3153-0.94 0,94 4,5 25 6 1,5
A3153-0.95 0,95 4,5 25 6 1,5
A3153-0.96 0,96 5 25 6,8 1,5
A3153-0.97 0,97 5 25 6,8 1,5
A3153-0.98 0,98 5 25 6,8 1,5
A3153-0.99 0,99 5 25 6,8 1,5
A3153-1 1 5 25 6,8 1,5
A3153-1.05 1,05 5 25 6,8 1,5
A3153-1.1 1,1 5 25 7,6 1,5
A3153-1.15 1,15 5 25 7,6 1,5
A3153-1.2 1,2 6 25 8,5 1,5
A3153-1.3 1,3 6 25 8,5 1,5
A3153-1.4 1,4 7 25 9,5 1,5
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
HSS-E drills with coolant-through
A6292TIN
MegaJet
~5×Dc
130°
P M K N S H O
TIN CC CC CC CC C
Dc d1
TIN mm inches/no. mm mm mm mm mm
Shank DIN 1835 E A6292TIN-5 5 35 82 44 36 6
A6292TIN-5.1 5,1 35 82 44 36 6
Dc d1 A6292TIN-5.2 5,2 35 82 44 36 6
A6292TIN-5.3 5,3 35 82 44 36 6
Lc A6292TIN-5.4 5,4 35 82 44 36 6
l2 l5
l1 A6292TIN-5.5 5,5 35 82 44 36 6
A6292TIN-7/32IN 5,556 7/32“ 35 82 44 36 6
A6292TIN-5.6 5,6 35 82 44 36 6
A6292TIN-5.7 5,7 35 82 44 36 6
A6292TIN-5.8 5,8 35 82 44 36 6
A6292TIN-5.9 5,9 35 82 44 36 6
A6292TIN-6 6 35 82 44 36 6
A6292TIN-6.1 6,1 41 91 53 36 8
A6292TIN-6.2 6,2 41 91 53 36 8
A6292TIN-6.3 6,3 41 91 53 36 8
A6292TIN-1/4IN 6,35 1/4“ 41 91 53 36 8
A6292TIN-6.4 6,4 41 91 53 36 8
A6292TIN-6.5 6,5 41 91 53 36 8
A6292TIN-6.6 6,6 41 91 53 36 8
A6292TIN-6.7 6,7 41 91 53 36 8
A6292TIN-6.8 6,8 41 91 53 36 8
A6292TIN-6.9 6,9 41 91 53 36 8
A6292TIN-7 7 41 91 53 36 8
A6292TIN-7.1 7,1 41 91 53 36 8
A6292TIN-9/32IN 7,144 9/32“ 41 91 53 36 8
A6292TIN-7.2 7,2 41 91 53 36 8
A6292TIN-7.3 7,3 41 91 53 36 8
A6292TIN-7.4 7,4 41 91 53 36 8
A6292TIN-7.5 7,5 41 91 53 36 8
A6292TIN-7.6 7,6 41 91 53 36 8
A6292TIN-7.7 7,7 41 91 53 36 8
A6292TIN-7.8 7,8 41 91 53 36 8
A6292TIN-7.9 7,9 41 91 53 36 8
A6292TIN-5/16IN 7,938 5/16“ 41 91 53 36 8
A6292TIN-8 8 41 91 53 36 8
A6292TIN-8.1 8,1 46 103 61 40 10
A6292TIN-8.2 8,2 46 103 61 40 10
A6292TIN-8.3 8,3 46 103 61 40 10
A6292TIN-8.4 8,4 46 103 61 40 10
A6292TIN-8.5 8,5 46 103 61 40 10
A6292TIN-8.6 8,6 46 103 61 40 10
A6292TIN-8.7 8,7 46 103 61 40 10
A6292TIN-11/32IN 8,731 11/32“ 46 103 61 40 10
A6292TIN-8.8 8,8 46 103 61 40 10
A6292TIN-8.9 8,9 46 103 61 40 10
A6292TIN-9 9 46 103 61 40 10
A6292TIN-9.1 9,1 46 103 61 40 10
A6292TIN-9.2 9,2 46 103 61 40 10
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
TIN mm inches/no. mm mm mm mm mm
Shank DIN 1835 E A6292TIN-9.3 9,3 46 103 61 40 10
A6292TIN-9.4 9,4 46 103 61 40 10
Dc d1 A6292TIN-9.5 9,5 46 103 61 40 10
A6292TIN-3/8IN 9,525 3/8“ 46 103 61 40 10
Lc A6292TIN-9.6 9,6 46 103 61 40 10
l2 l5
l1 A6292TIN-9.7 9,7 46 103 61 40 10
A6292TIN-9.8 9,8 46 103 61 40 10
A6292TIN-9.9 9,9 46 103 61 40 10
A6292TIN-10 10 46 103 61 40 10
A6292TIN-10.2 10,2 57 122 75 45 12
A6292TIN-13/32IN 10,319 13/32“ 57 122 75 45 12
A6292TIN-10.5 10,5 57 122 75 45 12
A6292TIN-11 11 57 122 75 45 12
A6292TIN-7/16IN 11,113 7/16“ 57 122 75 45 12
A6292TIN-11.5 11,5 57 122 75 45 12
A6292TIN-15/32IN 11,906 15/32“ 57 122 75 45 12
A6292TIN-12 12 57 122 75 45 12
A6292TIN-12.5 12,5 73 134 87 45 14
A6292TIN-1/2IN 12,7 1/2“ 73 134 87 45 14
A6292TIN-13 13 73 134 87 45 14
A6292TIN-17/32IN 13,494 17/32“ 73 134 87 45 14
A6292TIN-13.5 13,5 73 134 87 45 14
A6292TIN-14 14 73 134 87 45 14
A6292TIN-9/16IN 14,288 9/16“ 84 150 100 48 16
A6292TIN-14.5 14,5 84 150 100 48 16
A6292TIN-15 15 84 150 100 48 16
A6292TIN-19/32IN 15,081 19/32“ 84 150 100 48 16
A6292TIN-15.5 15,5 84 150 100 48 16
A6292TIN-5/8IN 15,875 5/8“ 84 150 100 48 16
A6292TIN-16 16 84 150 100 48 16
A6292TIN-16.5 16,5 94 162 112 48 18
A6292TIN-17 17 94 162 112 48 18
A6292TIN-11/16IN 17,463 11/16“ 94 162 112 48 18
A6292TIN-17.5 17,5 94 162 112 48 18
A6292TIN-18 18 94 162 112 48 18
A6292TIN-23/32IN 18,256 23/32“ 104 176 124 50 20
A6292TIN-18.5 18,5 104 176 124 50 20
A6292TIN-19 19 104 176 124 50 20
A6292TIN-3/4IN 19,05 3/4“ 104 176 124 50 20
A6292TIN-19.5 19,5 104 176 124 50 20
A6292TIN-20 20 104 176 124 50 20
A6292TIN-20.5 20,5 120 207 145 56 25
A6292TIN-21 21 120 207 145 56 25
A6292TIN-22 22 120 207 145 56 25
A6292TIN-23 23 120 207 145 56 25
A6292TIN-24 24 120 207 145 56 25
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
HSS-E deep-hole drills
A1249XPL
UFL®
DIN
~8×Dc 338
130°
P M K N S H O
XPL CC CC CC CC C C
Dc d1
A1249XPL-NO60 1,016 No. 60 10 34 12 1,016
Dc d1 A1249XPL-NO59 1,041 No. 59 10 34 12 1,041
A1249XPL-NO58 1,067 No. 58 12 36 14 1,067
Lc
A1249XPL-NO57 1,092 No. 57 12 36 14 1,092
l2
l1 A1249XPL-1.1 1,1 12 36 14 1,1
A1249XPL-NO56 1,181 No. 56 14 38 16 1,181
A1249XPL-3/64IN 1,191 3/64“ 14 38 16 1,191
A1249XPL-1.2 1,2 14 38 16 1,2
A1249XPL-1.3 1,3 14 38 16 1,3
A1249XPL-NO55 1,321 No. 55 15 40 18 1,321
A1249XPL-NO54 1,397 No. 54 15 40 18 1,397
A1249XPL-1.4 1,4 15 40 18 1,4
A1249XPL-1.5 1,5 15 40 18 1,5
A1249XPL-NO53 1,511 No. 53 17 43 20 1,511
A1249XPL-1/16IN 1,588 1/16“ 17 43 20 1,588
A1249XPL-1.6 1,6 17 43 20 1,6
A1249XPL-NO52 1,613 No. 52 17 43 20 1,613
A1249XPL-1.7 1,7 17 43 20 1,7
A1249XPL-NO51 1,702 No. 51 19 46 22 1,702
A1249XPL-NO50 1,778 No. 50 19 46 22 1,778
A1249XPL-1.8 1,8 19 46 22 1,8
A1249XPL-NO49 1,854 No. 49 19 46 22 1,854
A1249XPL-1.9 1,9 19 46 22 1,9
A1249XPL-NO48 1,93 No. 48 20 49 24 1,93
A1249XPL-5/64IN 1,984 5/64“ 20 49 24 1,984
A1249XPL-NO47 1,994 No. 47 20 49 24 1,994
A1249XPL-2 2 20 49 24 2
A1249XPL-NO46 2,057 No. 46 20 49 24 2,057
A1249XPL-NO45 2,083 No. 45 20 49 24 2,083
A1249XPL-2.1 2,1 20 49 24 2,1
A1249XPL-NO44 2,184 No. 44 23 53 27 2,184
A1249XPL-2.2 2,2 23 53 27 2,2
A1249XPL-NO43 2,261 No. 43 23 53 27 2,261
A1249XPL-2.3 2,3 23 53 27 2,3
A1249XPL-NO42 2,375 No. 42 26 57 30 2,375
A1249XPL-3/32IN 2,381 3/32“ 26 57 30 2,381
A1249XPL-2.4 2,4 26 57 30 2,4
A1249XPL-NO41 2,438 No. 41 26 57 30 2,438
A1249XPL-NO40 2,489 No. 40 26 57 30 2,489
A1249XPL-2.5 2,5 26 57 30 2,5
A1249XPL-NO39 2,527 No. 39 26 57 30 2,527
A1249XPL-NO38 2,578 No. 38 26 57 30 2,578
A1249XPL-2.6 2,6 26 57 30 2,6
A1249XPL-NO37 2,642 No. 37 26 57 30 2,642
A1249XPL-2.7 2,7 28 61 33 2,7
A1249XPL-NO36 2,705 No. 36 28 61 33 2,705
A1249XPL-7/64IN 2,778 7/64“ 28 61 33 2,778
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1249XPL-2.8 2,8 28 61 33 2,8
Dc d1 A1249XPL-NO34 2,819 No. 34 28 61 33 2,819
A1249XPL-NO33 2,87 No. 33 28 61 33 2,87
Lc
A1249XPL-2.9 2,9 28 61 33 2,9
l2
l1 A1249XPL-NO32 2,946 No. 32 28 61 33 2,946
A1249XPL-3 3 28 61 33 3
A1249XPL-NO31 3,048 No. 31 30 65 36 3,048
A1249XPL-3.1 3,1 30 65 36 3,1
A1249XPL-1/8IN 3,175 1/8“ 30 65 36 3,175
A1249XPL-3.2 3,2 30 65 36 3,2
A1249XPL-NO30 3,264 No. 30 30 65 36 3,264
A1249XPL-3.3 3,3 30 65 36 3,3
A1249XPL-3.4 3,4 33 70 39 3,4
A1249XPL-NO29 3,454 No. 29 33 70 39 3,454
A1249XPL-3.5 3,5 33 70 39 3,5
A1249XPL-NO28 3,569 No. 28 33 70 39 3,569
A1249XPL-9/64IN 3,572 9/64“ 33 70 39 3,572
A1249XPL-3.6 3,6 33 70 39 3,6
A1249XPL-NO27 3,658 No. 27 33 70 39 3,658
A1249XPL-3.7 3,7 33 70 39 3,7
A1249XPL-NO26 3,734 No. 26 33 70 39 3,734
A1249XPL-NO25 3,797 No. 25 36 75 43 3,797
A1249XPL-3.8 3,8 36 75 43 3,8
A1249XPL-NO24 3,861 No. 24 36 75 43 3,861
A1249XPL-3.9 3,9 36 75 43 3,9
A1249XPL-NO23 3,912 No. 23 36 75 43 3,912
A1249XPL-5/32IN 3,969 5/32“ 36 75 43 3,969
A1249XPL-NO22 3,988 No. 22 36 75 43 3,988
A1249XPL-4 4 36 75 43 4
A1249XPL-NO21 4,039 No. 21 36 75 43 4,039
A1249XPL-NO20 4,089 No. 20 36 75 43 4,089
A1249XPL-4.1 4,1 36 75 43 4,1
A1249XPL-4.2 4,2 36 75 43 4,2
A1249XPL-NO19 4,216 No. 19 36 75 43 4,216
A1249XPL-4.3 4,3 39 80 47 4,3
A1249XPL-NO18 4,305 No. 18 39 80 47 4,305
A1249XPL-11/64IN 4,366 11/64“ 39 80 47 4,366
A1249XPL-NO17 4,394 No. 17 39 80 47 4,394
A1249XPL-4.4 4,4 39 80 47 4,4
A1249XPL-NO16 4,496 No. 16 39 80 47 4,496
A1249XPL-4.5 4,5 39 80 47 4,5
A1249XPL-NO15 4,572 No. 15 39 80 47 4,572
A1249XPL-4.6 4,6 39 80 47 4,6
A1249XPL-NO14 4,623 No. 14 39 80 47 4,623
A1249XPL-4.65 4,65 39 80 47 4,65
A1249XPL-NO13 4,699 No. 13 39 80 47 4,699
A1249XPL-4.7 4,7 39 80 47 4,7
A1249XPL-3/16IN 4,763 3/16“ 44 86 52 4,763
A1249XPL-4.8 4,8 44 86 52 4,8
A1249XPL-NO12 4,801 No. 12 44 86 52 4,801
A1249XPL-NO11 4,851 No. 11 44 86 52 4,851
A1249XPL-4.9 4,9 44 86 52 4,9
A1249XPL-NO10 4,915 No. 10 44 86 52 4,915
A1249XPL-NO9 4,978 No. 09 44 86 52 4,978
A1249XPL-5 5 44 86 52 5
A1249XPL-NO8 5,055 No. 08 44 86 52 5,055
A1249XPL-5.1 5,1 44 86 52 5,1
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1249XPL-13/64IN 5,159 13/64“ 44 86 52 5,159
Dc d1 A1249XPL-NO6 5,182 No. 06 44 86 52 5,182
A1249XPL-5.2 5,2 44 86 52 5,2
Lc
A1249XPL-NO5 5,22 No. 05 44 86 52 5,22
l2
l1 A1249XPL-5.3 5,3 44 86 52 5,3
A1249XPL-NO4 5,309 No. 04 48 93 57 5,309
A1249XPL-5.4 5,4 48 93 57 5,4
A1249XPL-NO3 5,41 No. 03 48 93 57 5,41
A1249XPL-5.5 5,5 48 93 57 5,5
A1249XPL-5.55 5,55 48 93 57 5,55
A1249XPL-7/32IN 5,556 7/32“ 48 93 57 5,556
A1249XPL-5.6 5,6 48 93 57 5,6
A1249XPL-NO2 5,613 No. 02 48 93 57 5,613
A1249XPL-5.7 5,7 48 93 57 5,7
A1249XPL-NO1 5,791 No. 01 48 93 57 5,791
A1249XPL-5.8 5,8 48 93 57 5,8
A1249XPL-5.9 5,9 48 93 57 5,9
A1249XPL-15/64IN 5,953 15/64“ 48 93 57 5,953
A1249XPL-6 6 48 93 57 6
A1249XPL-6.1 6,1 52 101 63 6,1
A1249XPL-6.2 6,2 52 101 63 6,2
A1249XPL-6.3 6,3 52 101 63 6,3
A1249XPL-1/4IN 6,35 1/4“ 52 101 63 6,35
A1249XPL-6.4 6,4 52 101 63 6,4
A1249XPL-6.5 6,5 52 101 63 6,5
A1249XPL-6.6 6,6 52 101 63 6,6
A1249XPL-6.7 6,7 52 101 63 6,7
A1249XPL-17/64IN 6,747 17/64“ 57 109 69 6,747
A1249XPL-6.8 6,8 57 109 69 6,8
A1249XPL-6.9 6,9 57 109 69 6,9
A1249XPL-7 7 57 109 69 7
A1249XPL-7.1 7,1 57 109 69 7,1
A1249XPL-9/32IN 7,144 9/32“ 57 109 69 7,144
A1249XPL-7.2 7,2 57 109 69 7,2
A1249XPL-7.3 7,3 57 109 69 7,3
A1249XPL-7.4 7,4 57 109 69 7,4
A1249XPL-7.5 7,5 57 109 69 7,5
A1249XPL-19/64IN 7,541 19/64“ 62 117 75 7,541
A1249XPL-7.6 7,6 62 117 75 7,6
A1249XPL-7.7 7,7 62 117 75 7,7
A1249XPL-7.8 7,8 62 117 75 7,8
A1249XPL-7.9 7,9 62 117 75 7,9
A1249XPL-5/16IN 7,938 5/16“ 62 117 75 7,938
A1249XPL-8 8 62 117 75 8
A1249XPL-8.1 8,1 62 117 75 8,1
A1249XPL-8.2 8,2 62 117 75 8,2
A1249XPL-8.3 8,3 62 117 75 8,3
A1249XPL-21/64IN 8,334 21/64“ 62 117 75 8,334
A1249XPL-8.4 8,4 62 117 75 8,4
A1249XPL-8.5 8,5 62 117 75 8,5
A1249XPL-8.6 8,6 66 125 81 8,6
A1249XPL-8.7 8,7 66 125 81 8,7
A1249XPL-11/32IN 8,731 11/32“ 66 125 81 8,731
A1249XPL-8.8 8,8 66 125 81 8,8
A1249XPL-8.9 8,9 66 125 81 8,9
A1249XPL-9 9 66 125 81 9
A1249XPL-9.1 9,1 66 125 81 9,1
A1249XPL-23/64IN 9,128 23/64“ 66 125 81 9,128
A1249XPL-9.2 9,2 66 125 81 9,2
A1249XPL-9.3 9,3 66 125 81 9,3
A1249XPL-9.4 9,4 66 125 81 9,4
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1249XPL-9.5 9,5 66 125 81 9,5
A1249XPL-3/8IN 9,525 3/8“ 71 133 87 9,525
Dc d1 A1249XPL-9.6 9,6 71 133 87 9,6
A1249XPL-9.7 9,7 71 133 87 9,7
Lc
A1249XPL-9.8 9,8 71 133 87 9,8
l2
l1 A1249XPL-9.9 9,9 71 133 87 9,9
A1249XPL-25/64IN 9,922 25/64“ 71 133 87 9,922
A1249XPL-10 10 71 133 87 10
A1249XPL-10.2 10,2 71 133 87 10,2
A1249XPL-13/32IN 10,319 13/32“ 71 133 87 10,319
A1249XPL-10.5 10,5 71 133 87 10,5
A1249XPL-27/64IN 10,716 27/64“ 76 142 94 10,716
A1249XPL-11 11 76 142 94 11
A1249XPL-7/16IN 11,113 7/16“ 76 142 94 11,113
A1249XPL-11.2 11,2 76 142 94 11,2
A1249XPL-11.3 11,3 76 142 94 11,3
A1249XPL-11.5 11,5 76 142 94 11,5
A1249XPL-29/64IN 11,509 29/64“ 76 142 94 11,509
A1249XPL-15/32IN 11,906 15/32“ 87 151 101 11,906
A1249XPL-12 12 87 151 101 12
A1249XPL-31/64IN 12,303 31/64“ 87 151 101 12,303
A1249XPL-12.5 12,5 87 151 101 12,5
A1249XPL-1/2IN 12,7 1/2“ 87 151 101 12,7
A1249XPL-13 13 87 151 101 13
A1249XPL-13.1 13,1 87 151 101 13,1
A1249XPL-13.3 13,3 94 160 108 13,3
A1249XPL-13.5 13,5 94 160 108 13,5
A1249XPL-14 14 94 160 108 14
A1249XPL-14.5 14,5 99 169 114 14,5
A1249XPL-15 15 99 169 114 15
A1249XPL-15.1 15,1 104 178 120 15,1
A1249XPL-15.3 15,3 104 178 120 15,3
A1249XPL-15.5 15,5 104 178 120 15,5
A1249XPL-16 16 104 178 120 16
A1249XPL-16.5 16,5 108 184 125 16,5
A1249XPL-17 17 108 184 125 17
A1249XPL-17.5 17,5 112 191 130 17,5
A1249XPL-18 18 112 191 130 18
A1249XPL-18.5 18,5 116 198 135 18,5
A1249XPL-19 19 116 198 135 19
A1249XPL-19.5 19,5 120 205 140 19,5
A1249XPL-20 20 120 205 140 20
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
HSS-E deep-hole drills
A1254TFT
VA Inox
DIN
~8×Dc 338
118°
P M K N S H O
TFT C CC CC C C
Dc d1
TFT mm mm mm mm mm
A1254TFT-3.2 3,2 30 65 36 3,2
Dc d1 A1254TFT-3.3 3,3 30 65 36 3,3
A1254TFT-3.4 3,4 33 70 39 3,4
Lc
A1254TFT-3.5 3,5 33 70 39 3,5
l2
l1 A1254TFT-3.7 3,7 33 70 39 3,7
A1254TFT-3.8 3,8 36 75 43 3,8
A1254TFT-4 4 36 75 43 4
A1254TFT-4.2 4,2 36 75 43 4,2
A1254TFT-4.3 4,3 39 80 47 4,3
A1254TFT-4.5 4,5 39 80 47 4,5
A1254TFT-4.65 4,65 39 80 47 4,65
A1254TFT-4.7 4,7 39 80 47 4,7
A1254TFT-4.8 4,8 44 86 52 4,8
A1254TFT-5 5 44 86 52 5
A1254TFT-5.1 5,1 44 86 52 5,1
A1254TFT-5.3 5,3 44 86 52 5,3
A1254TFT-5.5 5,5 48 93 57 5,5
A1254TFT-5.55 5,55 48 93 57 5,55
A1254TFT-5.6 5,6 48 93 57 5,6
A1254TFT-5.8 5,8 48 93 57 5,8
A1254TFT-6 6 48 93 57 6
A1254TFT-6.5 6,5 52 101 63 6,5
A1254TFT-6.6 6,6 52 101 63 6,6
A1254TFT-6.8 6,8 57 109 69 6,8
A1254TFT-6.9 6,9 57 109 69 6,9
A1254TFT-7 7 57 109 69 7
A1254TFT-7.4 7,4 57 109 69 7,4
A1254TFT-7.5 7,5 57 109 69 7,5
A1254TFT-7.8 7,8 62 117 75 7,8
A1254TFT-8 8 62 117 75 8
A1254TFT-8.5 8,5 62 117 75 8,5
A1254TFT-8.6 8,6 66 125 81 8,6
A1254TFT-8.8 8,8 66 125 81 8,8
A1254TFT-9 9 66 125 81 9
A1254TFT-9.3 9,3 66 125 81 9,3
A1254TFT-9.4 9,4 66 125 81 9,4
A1254TFT-9.5 9,5 66 125 81 9,5
A1254TFT-9.8 9,8 71 133 87 9,8
A1254TFT-10 10 71 133 87 10
A1254TFT-10.2 10,2 71 133 87 10,2
A1254TFT-10.3 10,3 71 133 87 10,3
A1254TFT-10.5 10,5 71 133 87 10,5
A1254TFT-11 11 76 142 94 11
A1254TFT-11.2 11,2 76 142 94 11,2
A1254TFT-11.3 11,3 76 142 94 11,3
A1254TFT-11.5 11,5 76 142 94 11,5
A1254TFT-11.8 11,8 76 142 94 11,8
Continued
XIII D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
TFT mm mm mm mm mm
A1254TFT-12.1 12,1 87 151 101 12,1
Dc d1 A1254TFT-12.5 12,5 87 151 101 12,5
A1254TFT-13 13 87 151 101 13
Lc
A1254TFT-13.2 13,2 87 151 101 13,2
l2
l1 A1254TFT-13.5 13,5 94 160 108 13,5
A1254TFT-14 14 94 160 108 14
A1254TFT-14.1 14,1 99 169 114 14,1
A1254TFT-14.2 14,2 99 169 114 14,2
A1254TFT-14.5 14,5 99 169 114 14,5
A1254TFT-15 15 99 169 114 15
A1254TFT-15.1 15,1 104 178 120 15,1
A1254TFT-15.2 15,2 104 178 120 15,2
A1254TFT-15.5 15,5 104 178 120 15,5
A1254TFT-16 16 104 178 120 16
plication
Primary ap
ation
Other applic
XIII D1 B 474 B 482

Solid drilling
B1
HSS-E twist drills
A1247
Alpha® XE

~8×Dc 338
130°
P M K N S H O
Dc d1
A1247-NO60 1,016 No. 60 10 34 12 1,016
Dc d1 A1247-NO59 1,041 No. 59 10 34 12 1,041
A1247-NO58 1,067 No. 58 12 36 14 1,067
Lc A1247-NO57 1,092 No. 57 12 36 14 1,092
l2
l1 A1247-1.1 1,1 12 36 14 1,1
A1247-NO56 1,181 No. 56 14 38 16 1,181
A1247-3/64IN 1,191 3/64“ 14 38 16 1,191
A1247-1.2 1,2 14 38 16 1,2
A1247-1.25 1,25 14 38 16 1,25
A1247-1.3 1,3 14 38 16 1,3
A1247-NO55 1,321 No. 55 15 40 18 1,321
A1247-NO54 1,397 No. 54 15 40 18 1,397
A1247-1.4 1,4 15 40 18 1,4
A1247-1.5 1,5 15 40 18 1,5
A1247-NO53 1,511 No. 53 17 43 20 1,511
A1247-1/16IN 1,588 1/16“ 17 43 20 1,588
A1247-1.6 1,6 17 43 20 1,6
A1247-NO52 1,613 No. 52 17 43 20 1,613
A1247-1.7 1,7 17 43 20 1,7
A1247-NO51 1,702 No. 51 19 46 22 1,702
A1247-NO50 1,778 No. 50 19 46 22 1,778
A1247-1.8 1,8 19 46 22 1,8
A1247-NO49 1,854 No. 49 19 46 22 1,854
A1247-1.9 1,9 19 46 22 1,9
A1247-NO48 1,93 No. 48 20 49 24 1,93
A1247-5/64IN 1,984 5/64“ 20 49 24 1,984
A1247-NO47 1,994 No. 47 20 49 24 1,994
A1247-2 2 20 49 24 2
A1247-NO46 2,057 No. 46 20 49 24 2,057
A1247-NO45 2,083 No. 45 20 49 24 2,083
A1247-2.1 2,1 20 49 24 2,1
A1247-NO44 2,184 No. 44 23 53 27 2,184
A1247-2.2 2,2 23 53 27 2,2
A1247-NO43 2,261 No. 43 23 53 27 2,261
A1247-2.3 2,3 23 53 27 2,3
A1247-NO42 2,375 No. 42 26 57 30 2,375
A1247-3/32IN 2,381 3/32“ 26 57 30 2,381
A1247-2.4 2,4 26 57 30 2,4
A1247-NO41 2,438 No. 41 26 57 30 2,438
A1247-NO40 2,489 No. 40 26 57 30 2,489
A1247-2.5 2,5 26 57 30 2,5
A1247-NO39 2,527 No. 39 26 57 30 2,527
A1247-NO38 2,578 No. 38 26 57 30 2,578
A1247-2.6 2,6 26 57 30 2,6
A1247-NO37 2,642 No. 37 26 57 30 2,642
A1247-2.7 2,7 28 61 33 2,7
A1247-NO36 2,705 No. 36 28 61 33 2,705
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1247-NO35 2,794 No. 35 28 61 33 2,794
Dc d1 A1247-2.8 2,8 28 61 33 2,8
A1247-NO34 2,819 No. 34 28 61 33 2,819
Lc A1247-NO33 2,87 No. 33 28 61 33 2,87
l2
l1 A1247-2.9 2,9 28 61 33 2,9
A1247-NO32 2,946 No. 32 28 61 33 2,946
A1247-3 3 28 61 33 3
A1247-NO31 3,048 No. 31 30 65 36 3,048
A1247-3.1 3,1 30 65 36 3,1
A1247-1/8IN 3,175 1/8“ 30 65 36 3,175
A1247-3.2 3,2 30 65 36 3,2
A1247-NO30 3,264 No. 30 30 65 36 3,264
A1247-3.3 3,3 30 65 36 3,3
A1247-3.4 3,4 33 70 39 3,4
A1247-NO29 3,454 No. 29 33 70 39 3,454
A1247-3.5 3,5 33 70 39 3,5
A1247-NO28 3,569 No. 28 33 70 39 3,569
A1247-9/64IN 3,572 9/64“ 33 70 39 3,572
A1247-3.6 3,6 33 70 39 3,6
A1247-NO27 3,658 No. 27 33 70 39 3,658
A1247-3.7 3,7 33 70 39 3,7
A1247-NO26 3,734 No. 26 33 70 39 3,734
A1247-NO25 3,797 No. 25 36 75 43 3,797
A1247-3.8 3,8 36 75 43 3,8
A1247-NO24 3,861 No. 24 36 75 43 3,861
A1247-3.9 3,9 36 75 43 3,9
A1247-NO23 3,912 No. 23 36 75 43 3,912
A1247-5/32IN 3,969 5/32“ 36 75 43 3,969
A1247-NO22 3,988 No. 22 36 75 43 3,988
A1247-4 4 36 75 43 4
A1247-NO21 4,039 No. 21 36 75 43 4,039
A1247-NO20 4,089 No. 20 36 75 43 4,089
A1247-4.1 4,1 36 75 43 4,1
A1247-4.2 4,2 36 75 43 4,2
A1247-NO19 4,216 No. 19 36 75 43 4,216
A1247-4.3 4,3 39 80 47 4,3
A1247-NO18 4,305 No. 18 39 80 47 4,305
A1247-11/64IN 4,366 11/64“ 39 80 47 4,366
A1247-NO17 4,394 No. 17 39 80 47 4,394
A1247-4.4 4,4 39 80 47 4,4
A1247-NO16 4,496 No. 16 39 80 47 4,496
A1247-4.5 4,5 39 80 47 4,5
A1247-NO15 4,572 No. 15 39 80 47 4,572
A1247-4.6 4,6 39 80 47 4,6
A1247-NO14 4,623 No. 14 39 80 47 4,623
A1247-NO13 4,699 No. 13 39 80 47 4,699
A1247-4.7 4,7 39 80 47 4,7
A1247-3/16IN 4,763 3/16“ 44 86 52 4,763
A1247-4.8 4,8 44 86 52 4,8
A1247-NO12 4,801 No. 12 44 86 52 4,801
A1247-NO11 4,851 No. 11 44 86 52 4,851
A1247-4.9 4,9 44 86 52 4,9
A1247-NO10 4,915 No. 10 44 86 52 4,915
A1247-NO9 4,978 No. 09 44 86 52 4,978
A1247-5 5 44 86 52 5
A1247-NO8 5,055 No. 08 44 86 52 5,055
A1247-5.1 5,1 44 86 52 5,1
Continued
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1247-13/64IN 5,159 13/64“ 44 86 52 5,159
Dc d1 A1247-NO6 5,182 No. 06 44 86 52 5,182
A1247-5.2 5,2 44 86 52 5,2
Lc A1247-NO5 5,22 No. 05 44 86 52 5,22
l2
l1 A1247-5.3 5,3 44 86 52 5,3
A1247-NO4 5,309 No. 04 48 93 57 5,309
A1247-5.4 5,4 48 93 57 5,4
A1247-NO3 5,41 No. 03 48 93 57 5,41
A1247-5.5 5,5 48 93 57 5,5
A1247-7/32IN 5,556 7/32“ 48 93 57 5,556
A1247-5.6 5,6 48 93 57 5,6
A1247-NO2 5,613 No. 02 48 93 57 5,613
A1247-5.7 5,7 48 93 57 5,7
A1247-NO1 5,791 No. 01 48 93 57 5,791
A1247-5.8 5,8 48 93 57 5,8
A1247-5.9 5,9 48 93 57 5,9
A1247-15/64IN 5,953 15/64“ 48 93 57 5,953
A1247-6 6 48 93 57 6
A1247-6.1 6,1 52 101 63 6,1
A1247-6.2 6,2 52 101 63 6,2
A1247-6.3 6,3 52 101 63 6,3
A1247-1/4IN 6,35 1/4“ 52 101 63 6,35
A1247-6.4 6,4 52 101 63 6,4
A1247-6.5 6,5 52 101 63 6,5
A1247-6.6 6,6 52 101 63 6,6
A1247-6.7 6,7 52 101 63 6,7
A1247-17/64IN 6,747 17/64“ 57 109 69 6,747
A1247-6.8 6,8 57 109 69 6,8
A1247-6.9 6,9 57 109 69 6,9
A1247-7 7 57 109 69 7
A1247-7.1 7,1 57 109 69 7,1
A1247-9/32IN 7,144 9/32“ 57 109 69 7,144
A1247-7.2 7,2 57 109 69 7,2
A1247-7.3 7,3 57 109 69 7,3
A1247-7.4 7,4 57 109 69 7,4
A1247-7.5 7,5 57 109 69 7,5
A1247-19/64IN 7,541 19/64“ 62 117 75 7,541
A1247-7.6 7,6 62 117 75 7,6
A1247-7.7 7,7 62 117 75 7,7
A1247-7.8 7,8 62 117 75 7,8
A1247-7.9 7,9 62 117 75 7,9
A1247-5/16IN 7,938 5/16“ 62 117 75 7,938
A1247-8 8 62 117 75 8
A1247-8.1 8,1 62 117 75 8,1
A1247-8.2 8,2 62 117 75 8,2
A1247-8.3 8,3 62 117 75 8,3
A1247-21/64IN 8,334 21/64“ 62 117 75 8,334
A1247-8.4 8,4 62 117 75 8,4
A1247-8.5 8,5 62 117 75 8,5
A1247-8.6 8,6 66 125 81 8,6
A1247-8.7 8,7 66 125 81 8,7
A1247-11/32IN 8,731 11/32“ 66 125 81 8,731
A1247-8.8 8,8 66 125 81 8,8
A1247-8.9 8,9 66 125 81 8,9
A1247-9 9 66 125 81 9
A1247-9.1 9,1 66 125 81 9,1
A1247-23/64IN 9,128 23/64“ 66 125 81 9,128
A1247-9.2 9,2 66 125 81 9,2
A1247-9.3 9,3 66 125 81 9,3
A1247-9.4 9,4 66 125 81 9,4
A1247-9.5 9,5 66 125 81 9,5
Continued
D1 B 474 B 482

Solid drilling
B1
Continued
Dc d1
A1247-9.6 9,6 71 133 87 9,6
Dc d1 A1247-9.7 9,7 71 133 87 9,7
A1247-9.8 9,8 71 133 87 9,8
Lc A1247-9.9 9,9 71 133 87 9,9
l2
l1 A1247-25/64IN 9,922 25/64“ 71 133 87 9,922
A1247-10 10 71 133 87 10
A1247-10.2 10,2 71 133 87 10,2
A1247-13/32IN 10,319 13/32“ 71 133 87 10,319
A1247-10.5 10,5 71 133 87 10,5
A1247-27/64IN 10,716 27/64“ 76 142 94 10,716
A1247-10.8 10,8 76 142 94 10,8
A1247-11 11 76 142 94 11
A1247-7/16IN 11,113 7/16“ 76 142 94 11,113
A1247-11.2 11,2 76 142 94 11,2
A1247-11.5 11,5 76 142 94 11,5
A1247-29/64IN 11,509 29/64“ 76 142 94 11,509
A1247-11.8 11,8 76 142 94 11,8
A1247-15/32IN 11,906 15/32“ 87 151 101 11,906
A1247-12 12 87 151 101 12
A1247-31/64IN 12,303 31/64“ 87 151 101 12,303
A1247-12.5 12,5 87 151 101 12,5
A1247-1/2IN 12,7 1/2“ 87 151 101 12,7
A1247-13 13 87 151 101 13
A1247-13.1 13,1 87 151 101 13,1
A1247-13.3 13,3 94 160 108 13,3
A1247-13.5 13,5 94 160 108 13,5
A1247-14 14 94 160 108 14
A1247-14.5 14,5 99 169 114 14,5
A1247-15 15 99 169 114 15
A1247-15.1 15,1 104 178 120 15,1
A1247-15.3 15,3 104 178 120 15,3
A1247-15.5 15,5 104 178 120 15,5
A1247-16 16 104 178 120 16
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
HSS-E twist drills
A1244
VA
– Available as set DIN

~8×Dc 338
130°
P M K N S H O
Uncoated C CC C CC
Dc d1
Parallel shank A1244-0.3 0,3 2,5 19 3 0,3
A1244-NO80 0,343 No. 80 3,4 19 4 0,343
Dc d1 A1244-0.35 0,35 3,4 19 4 0,35
A1244-NO79 0,368 No. 79 3,4 19 4 0,368
Lc A1244-1/64IN 0,397 1/64“ 4,2 20 5 0,397
l2
l1 A1244-0.4 0,4 4,2 20 5 0,4
A1244-NO78 0,406 No. 78 4,2 20 5 0,406
A1244-0.45 0,45 4,2 20 5 0,45
A1244-NO77 0,457 No. 77 4,2 20 5 0,457
A1244-0.5 0,5 5,2 22 6 0,5
A1244-NO76 0,508 No. 76 5,2 22 6 0,508
A1244-NO75 0,533 No. 75 6,1 24 7 0,533
A1244-0.55 0,55 6,1 24 7 0,55
A1244-NO74 0,572 No. 74 6,1 24 7 0,572
A1244-0.6 0,6 6,1 24 7 0,6
A1244-NO73 0,61 No. 73 6,9 26 8 0,61
A1244-NO72 0,635 No. 72 6,9 26 8 0,635
A1244-0.65 0,65 6,9 26 8 0,65
A1244-NO71 0,66 No. 71 6,9 26 8 0,66
A1244-0.7 0,7 7,8 28 9 0,7
A1244-NO70 0,711 No. 70 7,8 28 9 0,711
A1244-NO69 0,742 No. 69 7,8 28 9 0,742
A1244-0.75 0,75 7,8 28 9 0,75
A1244-NO68 0,787 No. 68 8,7 30 10 0,787
A1244-1/32IN 0,794 1/32“ 8,7 30 10 0,794
A1244-0.8 0,8 8,7 30 10 0,8
A1244-NO67 0,813 No. 67 8,7 30 10 0,813
A1244-NO66 0,838 No. 66 8,7 30 10 0,838
A1244-0.85 0,85 8,7 30 10 0,85
A1244-NO65 0,889 No. 65 9,5 32 11 0,889
A1244-0.9 0,9 9,5 32 11 0,9
A1244-NO64 0,914 No. 64 9,5 32 11 0,914
A1244-NO63 0,94 No. 63 9,5 32 11 0,94
A1244-0.95 0,95 9,5 32 11 0,95
A1244-NO62 0,965 No. 62 10 34 12 0,965
A1244-NO61 0,991 No. 61 10 34 12 0,991
A1244-1 1 10 34 12 1
A1244-NO60 1,016 No. 60 10 34 12 1,016
A1244-NO59 1,041 No. 59 10 34 12 1,041
A1244-1.05 1,05 10 34 12 1,05
A1244-NO58 1,067 No. 58 12 36 14 1,067
A1244-NO57 1,092 No. 57 12 36 14 1,092
A1244-1.1 1,1 12 36 14 1,1
A1244-1.15 1,15 12 36 14 1,15
A1244-NO56 1,181 No. 56 14 38 16 1,181
A1244-3/64IN 1,191 3/64“ 14 38 16 1,191
A1244-1.2 1,2 14 38 16 1,2
A1244-1.25 1,25 14 38 16 1,25
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1244-1.3 1,3 14 38 16 1,3
A1244-NO55 1,321 No. 55 15 40 18 1,321
Dc d1 A1244-1.35 1,35 15 40 18 1,35
A1244-NO54 1,397 No. 54 15 40 18 1,397
Lc A1244-1.4 1,4 15 40 18 1,4
l2
l1 A1244-1.45 1,45 15 40 18 1,45
A1244-1.5 1,5 15 40 18 1,5
A1244-NO53 1,511 No. 53 17 43 20 1,511
A1244-1.55 1,55 17 43 20 1,55
A1244-1/16IN 1,588 1/16“ 17 43 20 1,588
A1244-1.6 1,6 17 43 20 1,6
A1244-NO52 1,613 No. 52 17 43 20 1,613
A1244-1.65 1,65 17 43 20 1,65
A1244-1.7 1,7 17 43 20 1,7
A1244-NO51 1,702 No. 51 19 46 22 1,702
A1244-1.75 1,75 19 46 22 1,75
A1244-NO50 1,778 No. 50 19 46 22 1,778
A1244-1.8 1,8 19 46 22 1,8
A1244-1.85 1,85 19 46 22 1,85
A1244-NO49 1,854 No. 49 19 46 22 1,854
A1244-1.9 1,9 19 46 22 1,9
A1244-NO48 1,93 No. 48 20 49 24 1,93
A1244-1.95 1,95 20 49 24 1,95
A1244-5/64IN 1,984 5/64“ 20 49 24 1,984
A1244-NO47 1,994 No. 47 20 49 24 1,994
A1244-2 2 20 49 24 2
A1244-2.05 2,05 20 49 24 2,05
A1244-NO46 2,057 No. 46 20 49 24 2,057
A1244-NO45 2,083 No. 45 20 49 24 2,083
A1244-2.1 2,1 20 49 24 2,1
A1244-2.15 2,15 23 53 27 2,15
A1244-NO44 2,184 No. 44 23 53 27 2,184
A1244-2.2 2,2 23 53 27 2,2
A1244-2.25 2,25 23 53 27 2,25
A1244-NO43 2,261 No. 43 23 53 27 2,261
A1244-2.3 2,3 23 53 27 2,3
A1244-2.35 2,35 23 53 27 2,35
A1244-NO42 2,375 No. 42 26 57 30 2,375
A1244-3/32IN 2,381 3/32“ 26 57 30 2,381
A1244-2.4 2,4 26 57 30 2,4
A1244-NO41 2,438 No. 41 26 57 30 2,438
A1244-2.45 2,45 26 57 30 2,45
A1244-NO40 2,489 No. 40 26 57 30 2,489
A1244-2.5 2,5 26 57 30 2,5
A1244-NO39 2,527 No. 39 26 57 30 2,527
A1244-2.55 2,55 26 57 30 2,55
A1244-NO38 2,578 No. 38 26 57 30 2,578
A1244-2.6 2,6 26 57 30 2,6
A1244-NO37 2,642 No. 37 26 57 30 2,642
A1244-2.65 2,65 26 57 30 2,65
A1244-2.7 2,7 28 61 33 2,7
A1244-NO36 2,705 No. 36 28 61 33 2,705
A1244-2.75 2,75 28 61 33 2,75
A1244-7/64IN 2,778 7/64“ 28 61 33 2,778
A1244-NO35 2,794 No. 35 28 61 33 2,794
A1244-2.8 2,8 28 61 33 2,8
A1244-NO34 2,819 No. 34 28 61 33 2,819
A1244-2.85 2,85 28 61 33 2,85
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1244-2.9 2,9 28 61 33 2,9
Dc d1 A1244-NO32 2,946 No. 32 28 61 33 2,946
A1244-2.95 2,95 28 61 33 2,95
Lc A1244-3 3 28 61 33 3
l2
l1 A1244-NO31 3,048 No. 31 30 65 36 3,048
A1244-3.1 3,1 30 65 36 3,1
A1244-1/8IN 3,175 1/8“ 30 65 36 3,175
A1244-3.2 3,2 30 65 36 3,2
A1244-NO30 3,264 No. 30 30 65 36 3,264
A1244-3.3 3,3 30 65 36 3,3
A1244-3.4 3,4 33 70 39 3,4
A1244-NO29 3,454 No. 29 33 70 39 3,454
A1244-3.5 3,5 33 70 39 3,5
A1244-NO28 3,569 No. 28 33 70 39 3,569
A1244-9/64IN 3,572 9/64“ 33 70 39 3,572
A1244-3.6 3,6 33 70 39 3,6
A1244-3.65 3,65 33 70 39 3,65
A1244-NO27 3,658 No. 27 33 70 39 3,658
A1244-3.7 3,7 33 70 39 3,7
A1244-NO26 3,734 No. 26 33 70 39 3,734
A1244-NO25 3,797 No. 25 36 75 43 3,797
A1244-3.8 3,8 36 75 43 3,8
A1244-NO24 3,861 No. 24 36 75 43 3,861
A1244-3.9 3,9 36 75 43 3,9
A1244-NO23 3,912 No. 23 36 75 43 3,912
A1244-5/32IN 3,969 5/32“ 36 75 43 3,969
A1244-NO22 3,988 No. 22 36 75 43 3,988
A1244-4 4 36 75 43 4
A1244-NO21 4,039 No. 21 36 75 43 4,039
A1244-NO20 4,089 No. 20 36 75 43 4,089
A1244-4.1 4,1 36 75 43 4,1
A1244-4.2 4,2 36 75 43 4,2
A1244-NO19 4,216 No. 19 36 75 43 4,216
A1244-4.3 4,3 39 80 47 4,3
A1244-NO18 4,305 No. 18 39 80 47 4,305
A1244-11/64IN 4,366 11/64“ 39 80 47 4,366
A1244-NO17 4,394 No. 17 39 80 47 4,394
A1244-4.4 4,4 39 80 47 4,4
A1244-NO16 4,496 No. 16 39 80 47 4,496
A1244-4.5 4,5 39 80 47 4,5
A1244-NO15 4,572 No. 15 39 80 47 4,572
A1244-4.6 4,6 39 80 47 4,6
A1244-NO14 4,623 No. 14 39 80 47 4,623
A1244-NO13 4,699 No. 13 39 80 47 4,699
A1244-4.7 4,7 39 80 47 4,7
A1244-3/16IN 4,763 3/16“ 44 86 52 4,763
A1244-4.8 4,8 44 86 52 4,8
A1244-NO12 4,801 No. 12 44 86 52 4,801
A1244-NO11 4,851 No. 11 44 86 52 4,851
A1244-4.9 4,9 44 86 52 4,9
A1244-NO10 4,915 No. 10 44 86 52 4,915
A1244-NO9 4,978 No. 09 44 86 52 4,978
A1244-5 5 44 86 52 5
A1244-NO8 5,055 No. 08 44 86 52 5,055
A1244-5.1 5,1 44 86 52 5,1
A1244-NO7 5,105 No. 07 44 86 52 5,105
A1244-13/64IN 5,159 13/64“ 44 86 52 5,159
A1244-NO6 5,182 No. 06 44 86 52 5,182
A1244-5.2 5,2 44 86 52 5,2
A1244-NO5 5,22 No. 05 44 86 52 5,22
A1244-5.3 5,3 44 86 52 5,3
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1244-5.4 5,4 48 93 57 5,4
Dc d1 A1244-NO3 5,41 No. 03 48 93 57 5,41
A1244-5.5 5,5 48 93 57 5,5
Lc A1244-7/32IN 5,556 7/32“ 48 93 57 5,556
l2
l1 A1244-5.6 5,6 48 93 57 5,6
A1244-NO2 5,613 No. 02 48 93 57 5,613
A1244-5.7 5,7 48 93 57 5,7
A1244-NO1 5,791 No. 01 48 93 57 5,791
A1244-5.8 5,8 48 93 57 5,8
A1244-5.9 5,9 48 93 57 5,9
A1244-15/64IN 5,953 15/64“ 48 93 57 5,953
A1244-6 6 48 93 57 6
A1244-6.1 6,1 52 101 63 6,1
A1244-6.2 6,2 52 101 63 6,2
A1244-6.3 6,3 52 101 63 6,3
A1244-1/4IN 6,35 1/4“ 52 101 63 6,35
A1244-6.4 6,4 52 101 63 6,4
A1244-6.5 6,5 52 101 63 6,5
A1244-6.6 6,6 52 101 63 6,6
A1244-6.7 6,7 52 101 63 6,7
A1244-17/64IN 6,747 17/64“ 57 109 69 6,747
A1244-6.8 6,8 57 109 69 6,8
A1244-6.9 6,9 57 109 69 6,9
A1244-7 7 57 109 69 7
A1244-7.1 7,1 57 109 69 7,1
A1244-9/32IN 7,144 9/32“ 57 109 69 7,144
A1244-7.2 7,2 57 109 69 7,2
A1244-7.3 7,3 57 109 69 7,3
A1244-7.4 7,4 57 109 69 7,4
A1244-7.5 7,5 57 109 69 7,5
A1244-19/64IN 7,541 19/64“ 62 117 75 7,541
A1244-7.6 7,6 62 117 75 7,6
A1244-7.7 7,7 62 117 75 7,7
A1244-7.8 7,8 62 117 75 7,8
A1244-7.9 7,9 62 117 75 7,9
A1244-5/16IN 7,938 5/16“ 62 117 75 7,938
A1244-8 8 62 117 75 8
A1244-8.1 8,1 62 117 75 8,1
A1244-8.2 8,2 62 117 75 8,2
A1244-8.3 8,3 62 117 75 8,3
A1244-21/64IN 8,334 21/64“ 62 117 75 8,334
A1244-8.4 8,4 62 117 75 8,4
A1244-8.5 8,5 62 117 75 8,5
A1244-8.6 8,6 66 125 81 8,6
A1244-8.7 8,7 66 125 81 8,7
A1244-11/32IN 8,731 11/32“ 66 125 81 8,731
A1244-8.8 8,8 66 125 81 8,8
A1244-8.9 8,9 66 125 81 8,9
A1244-9 9 66 125 81 9
A1244-9.1 9,1 66 125 81 9,1
A1244-23/64IN 9,128 23/64“ 66 125 81 9,128
A1244-9.2 9,2 66 125 81 9,2
A1244-9.3 9,3 66 125 81 9,3
A1244-9.4 9,4 66 125 81 9,4
A1244-9.5 9,5 66 125 81 9,5
A1244-3/8IN 9,525 3/8“ 71 133 87 9,525
A1244-9.6 9,6 71 133 87 9,6
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1244-9.7 9,7 71 133 87 9,7
A1244-9.8 9,8 71 133 87 9,8
Dc d1 A1244-9.9 9,9 71 133 87 9,9
A1244-25/64IN 9,922 25/64“ 71 133 87 9,922
Lc A1244-10 10 71 133 87 10
l2
l1 A1244-10.2 10,2 71 133 87 10,2
A1244-13/32IN 10,319 13/32“ 71 133 87 10,319
A1244-10.5 10,5 71 133 87 10,5
A1244-27/64IN 10,716 27/64“ 76 142 94 10,716
A1244-11 11 76 142 94 11
A1244-7/16IN 11,113 7/16“ 76 142 94 11,113
A1244-11.2 11,2 76 142 94 11,2
A1244-11.5 11,5 76 142 94 11,5
A1244-29/64IN 11,509 29/64“ 76 142 94 11,509
A1244-15/32IN 11,906 15/32“ 87 151 101 11,906
A1244-12 12 87 151 101 12
A1244-31/64IN 12,303 31/64“ 87 151 101 12,303
A1244-12.5 12,5 87 151 101 12,5
A1244-1/2IN 12,7 1/2“ 87 151 101 12,7
A1244-13 13 87 151 101 13
A1244-33/64IN 13,097 33/64“ 87 151 101 13,097
A1244-17/32IN 13,494 17/32“ 94 160 108 13,494
A1244-13.5 13,5 94 160 108 13,5
A1244-35/64IN 13,891 35/64“ 94 160 108 13,891
A1244-14 14 94 160 108 14
A1244-9/16IN 14,288 9/16“ 99 169 114 14,288
A1244-14.5 14,5 99 169 114 14,5
A1244-15 15 99 169 114 15
D1 B 476 B 482

Solid drilling
B1
HSS deep-hole drills
A1222
UFL®
– Uncoated up to 1.9 mm
– Available as set DIN
~8×Dc 338
130°
P M K N S H O
Uncoated CC C CC CC C C
Dc d1
A1222-NO60 1,016 No. 60 10 34 12 1,016
Dc d1 A1222-NO59 1,041 No. 59 10 34 12 1,041
A1222-NO58 1,067 No. 58 12 36 14 1,067
Lc
A1222-NO57 1,092 No. 57 12 36 14 1,092
l2
l1 A1222-1.1 1,1 12 36 14 1,1
A1222-NO56 1,181 No. 56 14 38 16 1,181
A1222-3/64IN 1,191 3/64“ 14 38 16 1,191
A1222-1.2 1,2 14 38 16 1,2
A1222-1.25 1,25 14 38 16 1,25
A1222-1.3 1,3 14 38 16 1,3
A1222-NO55 1,321 No. 55 15 40 18 1,321
A1222-NO54 1,397 No. 54 15 40 18 1,397
A1222-1.4 1,4 15 40 18 1,4
A1222-1.5 1,5 15 40 18 1,5
A1222-NO53 1,511 No. 53 17 43 20 1,511
A1222-1/16IN 1,588 1/16“ 17 43 20 1,588
A1222-1.6 1,6 17 43 20 1,6
A1222-NO52 1,613 No. 52 17 43 20 1,613
A1222-1.7 1,7 17 43 20 1,7
A1222-NO51 1,702 No. 51 19 46 22 1,702
A1222-NO50 1,778 No. 50 19 46 22 1,778
A1222-1.8 1,8 19 46 22 1,8
A1222-NO49 1,854 No. 49 19 46 22 1,854
A1222-1.9 1,9 19 46 22 1,9
A1222-NO48 1,93 No. 48 20 49 24 1,93
A1222-5/64IN 1,984 5/64“ 20 49 24 1,984
A1222-NO47 1,994 No. 47 20 49 24 1,994
A1222-2 2 20 49 24 2
A1222-NO46 2,057 No. 46 20 49 24 2,057
A1222-NO45 2,083 No. 45 20 49 24 2,083
A1222-2.1 2,1 20 49 24 2,1
A1222-NO44 2,184 No. 44 23 53 27 2,184
A1222-2.2 2,2 23 53 27 2,2
A1222-NO43 2,261 No. 43 23 53 27 2,261
A1222-2.3 2,3 23 53 27 2,3
A1222-NO42 2,375 No. 42 26 57 30 2,375
A1222-3/32IN 2,381 3/32“ 26 57 30 2,381
A1222-2.4 2,4 26 57 30 2,4
A1222-NO41 2,438 No. 41 26 57 30 2,438
A1222-NO40 2,489 No. 40 26 57 30 2,489
A1222-2.5 2,5 26 57 30 2,5
A1222-NO39 2,527 No. 39 26 57 30 2,527
A1222-NO38 2,578 No. 38 26 57 30 2,578
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1222-2.6 2,6 26 57 30 2,6
A1222-NO37 2,642 No. 37 26 57 30 2,642
Dc d1 A1222-2.7 2,7 28 61 33 2,7
A1222-NO36 2,705 No. 36 28 61 33 2,705
Lc
A1222-7/64IN 2,778 7/64“ 28 61 33 2,778
l2
l1 A1222-NO35 2,794 No. 35 28 61 33 2,794
A1222-2.8 2,8 28 61 33 2,8
A1222-NO34 2,819 No. 34 28 61 33 2,819
A1222-NO33 2,87 No. 33 28 61 33 2,87
A1222-2.9 2,9 28 61 33 2,9
A1222-NO32 2,946 No. 32 28 61 33 2,946
A1222-3 3 28 61 33 3
A1222-NO31 3,048 No. 31 30 65 36 3,048
A1222-3.1 3,1 30 65 36 3,1
A1222-1/8IN 3,175 1/8“ 30 65 36 3,175
A1222-3.2 3,2 30 65 36 3,2
A1222-NO30 3,264 No. 30 30 65 36 3,264
A1222-3.3 3,3 30 65 36 3,3
A1222-3.4 3,4 33 70 39 3,4
A1222-NO29 3,454 No. 29 33 70 39 3,454
A1222-3.5 3,5 33 70 39 3,5
A1222-NO28 3,569 No. 28 33 70 39 3,569
A1222-9/64IN 3,572 9/64“ 33 70 39 3,572
A1222-3.6 3,6 33 70 39 3,6
A1222-NO27 3,658 No. 27 33 70 39 3,658
A1222-3.7 3,7 33 70 39 3,7
A1222-NO26 3,734 No. 26 33 70 39 3,734
A1222-NO25 3,797 No. 25 36 75 43 3,797
A1222-3.8 3,8 36 75 43 3,8
A1222-NO24 3,861 No. 24 36 75 43 3,861
A1222-3.9 3,9 36 75 43 3,9
A1222-NO23 3,912 No. 23 36 75 43 3,912
A1222-5/32IN 3,969 5/32“ 36 75 43 3,969
A1222-NO22 3,988 No. 22 36 75 43 3,988
A1222-4 4 36 75 43 4
A1222-NO21 4,039 No. 21 36 75 43 4,039
A1222-NO20 4,089 No. 20 36 75 43 4,089
A1222-4.1 4,1 36 75 43 4,1
A1222-4.2 4,2 36 75 43 4,2
A1222-NO19 4,216 No. 19 36 75 43 4,216
A1222-4.3 4,3 39 80 47 4,3
A1222-NO18 4,305 No. 18 39 80 47 4,305
A1222-11/64IN 4,366 11/64“ 39 80 47 4,366
A1222-NO17 4,394 No. 17 39 80 47 4,394
A1222-4.4 4,4 39 80 47 4,4
A1222-NO16 4,496 No. 16 39 80 47 4,496
A1222-4.5 4,5 39 80 47 4,5
A1222-NO15 4,572 No. 15 39 80 47 4,572
A1222-4.6 4,6 39 80 47 4,6
A1222-NO14 4,623 No. 14 39 80 47 4,623
A1222-NO13 4,699 No. 13 39 80 47 4,699
A1222-4.7 4,7 39 80 47 4,7
A1222-3/16IN 4,763 3/16“ 44 86 52 4,763
A1222-4.8 4,8 44 86 52 4,8
A1222-NO12 4,801 No. 12 44 86 52 4,801
A1222-NO11 4,851 No. 11 44 86 52 4,851
A1222-4.9 4,9 44 86 52 4,9
A1222-NO10 4,915 No. 10 44 86 52 4,915
A1222-NO9 4,978 No. 09 44 86 52 4,978
A1222-5 5 44 86 52 5
A1222-NO8 5,055 No. 08 44 86 52 5,055
A1222-5.1 5,1 44 86 52 5,1
Continued
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1222-13/64IN 5,159 13/64“ 44 86 52 5,159
Dc d1 A1222-NO6 5,182 No. 06 44 86 52 5,182
A1222-5.2 5,2 44 86 52 5,2
Lc
A1222-NO5 5,22 No. 05 44 86 52 5,22
l2
l1 A1222-5.3 5,3 44 86 52 5,3
A1222-NO4 5,309 No. 04 48 93 57 5,309
A1222-5.4 5,4 48 93 57 5,4
A1222-NO3 5,41 No. 03 48 93 57 5,41
A1222-5.5 5,5 48 93 57 5,5
A1222-7/32IN 5,556 7/32“ 48 93 57 5,556
A1222-5.6 5,6 48 93 57 5,6
A1222-NO2 5,613 No. 02 48 93 57 5,613
A1222-5.7 5,7 48 93 57 5,7
A1222-NO1 5,791 No. 01 48 93 57 5,791
A1222-5.8 5,8 48 93 57 5,8
A1222-5.9 5,9 48 93 57 5,9
A1222-LET.A 5,944 Let.A 48 93 57 5,944
A1222-15/64IN 5,953 15/64“ 48 93 57 5,953
A1222-6 6 48 93 57 6
A1222-LET.B 6,045 Let.B 52 101 63 6,045
A1222-6.1 6,1 52 101 63 6,1
A1222-LET.C 6,147 Let.C 52 101 63 6,147
A1222-6.2 6,2 52 101 63 6,2
A1222-LET.D 6,248 Let.D 52 101 63 6,248
A1222-6.3 6,3 52 101 63 6,3
A1222-1/4IN 6,35 1/4“ 52 101 63 6,35
A1222-6.4 6,4 52 101 63 6,4
A1222-6.5 6,5 52 101 63 6,5
A1222-LET.F 6,528 Let.F 52 101 63 6,528
A1222-6.6 6,6 52 101 63 6,6
A1222-LET.G 6,629 Let.G 52 101 63 6,629
A1222-6.7 6,7 52 101 63 6,7
A1222-17/64IN 6,747 17/64“ 57 109 69 6,747
A1222-LET.H 6,756 Let.H 57 109 69 6,756
A1222-6.8 6,8 57 109 69 6,8
A1222-6.9 6,9 57 109 69 6,9
A1222-LET.I 6,909 Let.I 57 109 69 6,909
A1222-7 7 57 109 69 7
A1222-LET.J 7,036 Let.J 57 109 69 7,036
A1222-7.1 7,1 57 109 69 7,1
A1222-LET.K 7,137 Let.K 57 109 69 7,137
A1222-9/32IN 7,144 9/32“ 57 109 69 7,144
A1222-7.2 7,2 57 109 69 7,2
A1222-7.3 7,3 57 109 69 7,3
A1222-LET.L 7,366 Let.L 57 109 69 7,366
A1222-7.4 7,4 57 109 69 7,4
A1222-LET.M 7,493 Let.M 57 109 69 7,493
A1222-7.5 7,5 57 109 69 7,5
A1222-19/64IN 7,541 19/64“ 62 117 75 7,541
A1222-7.6 7,6 62 117 75 7,6
A1222-LET.N 7,671 Let.N 62 117 75 7,671
A1222-7.7 7,7 62 117 75 7,7
A1222-7.8 7,8 62 117 75 7,8
A1222-7.9 7,9 62 117 75 7,9
A1222-5/16IN 7,938 5/16“ 62 117 75 7,938
A1222-8 8 62 117 75 8
A1222-LET.O 8,026 Let.O 62 117 75 8,026
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1222-8.1 8,1 62 117 75 8,1
A1222-8.2 8,2 62 117 75 8,2
Dc d1 A1222-LET.P 8,204 Let.P 62 117 75 8,204
A1222-8.3 8,3 62 117 75 8,3
Lc
A1222-21/64IN 8,334 21/64“ 62 117 75 8,334
l2
l1 A1222-8.4 8,4 62 117 75 8,4
A1222-LET.Q 8,433 Let.Q 62 117 75 8,433
A1222-8.5 8,5 62 117 75 8,5
A1222-8.6 8,6 66 125 81 8,6
A1222-LET.R 8,611 Let.R 66 125 81 8,611
A1222-8.7 8,7 66 125 81 8,7
A1222-11/32IN 8,731 11/32“ 66 125 81 8,731
A1222-8.8 8,8 66 125 81 8,8
A1222-LET.S 8,839 Let.S 66 125 81 8,839
A1222-8.9 8,9 66 125 81 8,9
A1222-9 9 66 125 81 9
A1222-LET.T 9,093 Let.T 66 125 81 9,093
A1222-9.1 9,1 66 125 81 9,1
A1222-23/64IN 9,128 23/64“ 66 125 81 9,128
A1222-9.2 9,2 66 125 81 9,2
A1222-9.3 9,3 66 125 81 9,3
A1222-LET.U 9,347 Let.U 66 125 81 9,347
A1222-9.4 9,4 66 125 81 9,4
A1222-9.5 9,5 66 125 81 9,5
A1222-3/8IN 9,525 3/8“ 71 133 87 9,525
A1222-LET.V 9,576 Let.V 71 133 87 9,576
A1222-9.6 9,6 71 133 87 9,6
A1222-9.7 9,7 71 133 87 9,7
A1222-9.8 9,8 71 133 87 9,8
A1222-LET.W 9,804 Let.W 71 133 87 9,804
A1222-9.9 9,9 71 133 87 9,9
A1222-25/64IN 9,922 25/64“ 71 133 87 9,922
A1222-10 10 71 133 87 10
A1222-LET.X 10,084 Let.X 71 133 87 10,084
A1222-10.2 10,2 71 133 87 10,2
A1222-LET.Y 10,262 Let.Y 71 133 87 10,262
A1222-13/32IN 10,319 13/32“ 71 133 87 10,319
A1222-LET.Z 10,49 Let.Z 71 133 87 10,49
A1222-10.5 10,5 71 133 87 10,5
A1222-27/64IN 10,716 27/64“ 76 142 94 10,716
A1222-10.8 10,8 76 142 94 10,8
A1222-11 11 76 142 94 11
A1222-7/16IN 11,113 7/16“ 76 142 94 11,113
A1222-11.2 11,2 76 142 94 11,2
A1222-11.5 11,5 76 142 94 11,5
A1222-29/64IN 11,509 29/64“ 76 142 94 11,509
A1222-11.8 11,8 76 142 94 11,8
A1222-15/32IN 11,906 15/32“ 87 151 101 11,906
A1222-12 12 87 151 101 12
A1222-31/64IN 12,303 31/64“ 87 151 101 12,303
A1222-12.5 12,5 87 151 101 12,5
A1222-1/2IN 12,7 1/2“ 87 151 101 12,7
A1222-13 13 87 151 101 13
A1222-33/64IN 13,097 33/64“ 87 151 101 13,097
A1222-13.1 13,1 87 151 101 13,1
A1222-13.3 13,3 94 160 108 13,3
A1222-17/32IN 13,494 17/32“ 94 160 108 13,494
A1222-13.5 13,5 94 160 108 13,5
A1222-35/64IN 13,891 35/64“ 94 160 108 13,891
A1222-14 14 94 160 108 14
A1222-9/16IN 14,288 9/16“ 99 169 114 14,288
A1222-14.5 14,5 99 169 114 14,5
Continued
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1222-15 15 99 169 114 15
Dc d1 A1222-19/32IN 15,081 19/32“ 104 178 120 15,081
A1222-15.1 15,1 104 178 120 15,1
Lc
A1222-15.3 15,3 104 178 120 15,3
l2
l1 A1222-39/64IN 15,478 39/64“ 104 178 120 15,478
A1222-15.5 15,5 104 178 120 15,5
A1222-5/8IN 15,875 5/8“ 104 178 120 15,875
A1222-16 16 104 178 120 16
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
HSS Jobber drills
A1211 / A1211TIN
DIN
– Available as set ~8×Dc 338
– Type N 118°
P M K N S H O
TIN CC C CC C C C
Dc Dc d1
Designation Designation h8 inches/ Lc l1 l2 f11
Parallel shank A1211-0.2 0,2 2,1 19 2,5 0,2
A1211-0.22 0,22 2,1 19 2,5 0,22
Dc d1 A1211-0.23 0,23 2,1 19 2,5 0,23
A1211-0.25 0,25 2,5 19 3 0,25
Lc A1211-0.27 0,27 2,5 19 3 0,27
l2
l1 A1211-0.28 0,28 2,5 19 3 0,28
A1211-0.29 0,29 2,5 19 3 0,29
A1211-0.3 0,3 2,5 19 3 0,3
A1211-0.31 0,31 3,4 19 4 0,31
A1211-NO82 0,318 No. 82 3,4 19 4 0,318
A1211-0.32 0,32 3,4 19 4 0,32
A1211-0.33 0,33 No. 81 3,4 19 4 0,33
A1211-0.34 0,34 3,4 19 4 0,34
A1211-NO80 0,343 No. 80 3,4 19 4 0,343
A1211-0.35 0,35 3,4 19 4 0,35
A1211-NO79 0,368 No. 79 3,4 19 4 0,368
A1211-0.38 0,38 3,4 19 4 0,38
A1211-1/64IN 0,397 1/64“ 4,2 20 5 0,397
A1211-0.4 0,4 4,2 20 5 0,4
A1211-NO78 0,406 No. 78 4,2 20 5 0,406
A1211-0.42 0,42 4,2 20 5 0,42
A1211-0.43 0,43 4,2 20 5 0,43
A1211-0.45 0,45 4,2 20 5 0,45
A1211-NO77 0,457 No. 77 4,2 20 5 0,457
A1211-0.47 0,47 4,2 20 5 0,47
A1211-0.48 0,48 4,2 20 5 0,48
A1211-0.49 0,49 5,2 22 6 0,49
A1211TIN-0.5 A1211-0.5 0,5 5,2 22 6 0,5
A1211-NO76 0,508 No. 76 5,2 22 6 0,508
A1211-0.51 0,51 5,2 22 6 0,51
A1211-0.52 0,52 5,2 22 6 0,52
A1211-0.53 0,53 5,2 22 6 0,53
A1211-NO75 0,533 No. 75 6,1 24 7 0,533
A1211-0.54 0,54 6,1 24 7 0,54
A1211-0.55 0,55 6,1 24 7 0,55
A1211-0.57 0,57 6,1 24 7 0,57
A1211-NO74 0,572 No. 74 6,1 24 7 0,572
A1211-0.58 0,58 6,1 24 7 0,58
A1211-0.59 0,59 6,1 24 7 0,59
A1211TIN-0.6 A1211-0.6 0,6 6,1 24 7 0,6
A1211-NO73 0,61 No. 73 6,9 26 8 0,61
A1211-0.62 0,62 6,9 26 8 0,62
A1211-0.63 0,63 6,9 26 8 0,63
A1211-NO72 0,635 No. 72 6,9 26 8 0,635
A1211-0.65 0,65 6,9 26 8 0,65
A1211-NO71 0,66 No. 71 6,9 26 8 0,66
A1211-0.67 0,67 6,9 26 8 0,67
A1211-0.68 0,68 7,8 28 9 0,68
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1211TIN-0.7 A1211-0.7 0,7 7,8 28 9 0,7
A1211-NO70 0,711 No. 70 7,8 28 9 0,711
Dc d1 A1211-0.72 0,72 7,8 28 9 0,72
A1211-0.73 0,73 7,8 28 9 0,73
Lc A1211-NO69 0,742 No. 69 7,8 28 9 0,742
l2
l1 A1211-0.75 0,75 7,8 28 9 0,75
A1211-0.76 0,76 8,7 30 10 0,76
A1211-0.78 0,78 8,7 30 10 0,78
A1211-NO68 0,787 No. 68 8,7 30 10 0,787
A1211-1/32IN 0,794 1/32“ 8,7 30 10 0,794
A1211TIN-0.8 A1211-0.8 0,8 8,7 30 10 0,8
A1211-0.81 0,81 8,7 30 10 0,81
A1211-NO67 0,813 No. 67 8,7 30 10 0,813
A1211-0.82 0,82 8,7 30 10 0,82
A1211-0.83 0,83 8,7 30 10 0,83
A1211-NO66 0,838 No. 66 8,7 30 10 0,838
A1211-0.85 0,85 8,7 30 10 0,85
A1211-0.87 0,87 9,5 32 11 0,87
A1211-0.88 0,88 9,5 32 11 0,88
A1211-NO65 0,889 No. 65 9,5 32 11 0,889
A1211TIN-0.9 A1211-0.9 0,9 9,5 32 11 0,9
A1211-0.91 0,91 9,5 32 11 0,91
A1211-NO64 0,914 No. 64 9,5 32 11 0,914
A1211-0.92 0,92 9,5 32 11 0,92
A1211-NO63 0,94 No. 63 9,5 32 11 0,94
A1211-0.95 0,95 9,5 32 11 0,95
A1211-0.96 0,96 10 34 12 0,96
A1211-NO62 0,965 No. 62 10 34 12 0,965
A1211-0.97 0,97 10 34 12 0,97
A1211-0.98 0,98 10 34 12 0,98
A1211-0.99 0,99 10 34 12 0,99
A1211-NO61 0,991 No. 61 10 34 12 0,991
A1211TIN-1 A1211-1 1 10 34 12 1
A1211-1.01 1,01 10 34 12 1,01
A1211-NO60 1,016 No. 60 10 34 12 1,016
A1211-1.02 1,02 10 34 12 1,02
A1211-1.03 1,03 10 34 12 1,03
A1211-1.04 1,04 10 34 12 1,04
A1211-NO59 1,041 No. 59 10 34 12 1,041
A1211-1.05 1,05 10 34 12 1,05
A1211-NO58 1,067 No. 58 12 36 14 1,067
A1211-NO57 1,092 No. 57 12 36 14 1,092
A1211TIN-1.1 A1211-1.1 1,1 12 36 14 1,1
A1211-1.12 1,12 12 36 14 1,12
A1211-1.13 1,13 12 36 14 1,13
A1211-1.15 1,15 12 36 14 1,15
A1211-1.18 1,18 12 36 14 1,18
A1211-NO56 1,181 No. 56 14 38 16 1,181
A1211-3/64IN 1,191 3/64“ 14 38 16 1,191
A1211TIN-1.2 A1211-1.2 1,2 14 38 16 1,2
A1211-1.21 1,21 14 38 16 1,21
A1211-1.22 1,22 14 38 16 1,22
A1211-1.23 1,23 14 38 16 1,23
A1211-1.24 1,24 14 38 16 1,24
A1211-1.25 1,25 14 38 16 1,25
A1211-1.27 1,27 14 38 16 1,27
A1211-1.28 1,28 14 38 16 1,28
A1211TIN-1.3 A1211-1.3 1,3 14 38 16 1,3
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
A1211-1.33 1,33 15 40 18 1,33
Dc d1 A1211-1.35 1,35 15 40 18 1,35
A1211-1.36 1,36 15 40 18 1,36
Lc A1211-1.37 1,37 15 40 18 1,37
l2
l1 A1211-NO54 1,397 No. 54 15 40 18 1,397
A1211TIN-1.4 A1211-1.4 1,4 15 40 18 1,4
A1211-1.42 1,42 15 40 18 1,42
A1211-1.43 1,43 15 40 18 1,43
A1211-1.45 1,45 15 40 18 1,45
A1211-1.49 1,49 15 40 18 1,49
A1211TIN-1.5 A1211-1.5 1,5 15 40 18 1,5
A1211-1.51 1,51 17 43 20 1,51
A1211-NO53 1,511 No. 53 17 43 20 1,511
A1211-1.52 1,52 17 43 20 1,52
A1211-1.53 1,53 17 43 20 1,53
A1211-1.55 1,55 17 43 20 1,55
A1211-1.57 1,57 17 43 20 1,57
A1211-1/16IN 1,588 1/16“ 17 43 20 1,588
A1211TIN-1.6 A1211-1.6 1,6 17 43 20 1,6
A1211-NO52 1,613 No. 52 17 43 20 1,613
A1211-1.63 1,63 17 43 20 1,63
A1211-1.65 1,65 17 43 20 1,65
A1211TIN-1.7 A1211-1.7 1,7 17 43 20 1,7
A1211-NO51 1,702 No. 51 19 46 22 1,702
A1211-1.75 1,75 19 46 22 1,75
A1211-NO50 1,778 No. 50 19 46 22 1,778
A1211TIN-1.8 A1211-1.8 1,8 19 46 22 1,8
A1211-1.85 1,85 19 46 22 1,85
A1211-NO49 1,854 No. 49 19 46 22 1,854
A1211TIN-1.9 A1211-1.9 1,9 19 46 22 1,9
A1211-NO48 1,93 No. 48 20 49 24 1,93
A1211-1.95 1,95 20 49 24 1,95
A1211-5/64IN 1,984 5/64“ 20 49 24 1,984
A1211-NO47 1,994 No. 47 20 49 24 1,994
A1211TIN-2 A1211-2 2 20 49 24 2
A1211-2.05 2,05 20 49 24 2,05
A1211-NO46 2,057 No. 46 20 49 24 2,057
A1211-NO45 2,083 No. 45 20 49 24 2,083
A1211TIN-2.1 A1211-2.1 2,1 20 49 24 2,1
A1211-2.15 2,15 23 53 27 2,15
A1211-NO44 2,184 No. 44 23 53 27 2,184
A1211TIN-2.2 A1211-2.2 2,2 23 53 27 2,2
A1211-2.25 2,25 23 53 27 2,25
A1211-NO43 2,261 No. 43 23 53 27 2,261
A1211TIN-2.3 A1211-2.3 2,3 23 53 27 2,3
A1211-2.35 2,35 23 53 27 2,35
A1211-NO42 2,375 No. 42 26 57 30 2,375
A1211-3/32IN 2,381 3/32“ 26 57 30 2,381
A1211TIN-2.4 A1211-2.4 2,4 26 57 30 2,4
A1211-NO41 2,438 No. 41 26 57 30 2,438
A1211-2.45 2,45 26 57 30 2,45
A1211-NO40 2,489 No. 40 26 57 30 2,489
A1211TIN-2.5 A1211-2.5 2,5 26 57 30 2,5
A1211-NO39 2,527 No. 39 26 57 30 2,527
A1211-2.55 2,55 26 57 30 2,55
A1211-NO38 2,578 No. 38 26 57 30 2,578
A1211TIN-2.6 A1211-2.6 2,6 26 57 30 2,6
A1211-NO37 2,642 No. 37 26 57 30 2,642
A1211-2.65 2,65 26 57 30 2,65
A1211TIN-2.7 A1211-2.7 2,7 28 61 33 2,7
A1211-NO36 2,705 No. 36 28 61 33 2,705
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1211-2.75 2,75 28 61 33 2,75
A1211-7/64IN 2,778 7/64“ 28 61 33 2,778
Dc d1 A1211-NO35 2,794 No. 35 28 61 33 2,794
A1211TIN-2.8 A1211-2.8 2,8 28 61 33 2,8
Lc A1211-NO34 2,819 No. 34 28 61 33 2,819
l2
l1 A1211-2.85 2,85 28 61 33 2,85
A1211-NO33 2,87 No. 33 28 61 33 2,87
A1211TIN-2.9 A1211-2.9 2,9 28 61 33 2,9
A1211-NO32 2,946 No. 32 28 61 33 2,946
A1211-2.95 2,95 28 61 33 2,95
A1211TIN-3 A1211-3 3 28 61 33 3
A1211-NO31 3,048 No. 31 30 65 36 3,048
A1211-3.05 3,05 30 65 36 3,05
A1211TIN-3.1 A1211-3.1 3,1 30 65 36 3,1
A1211-3.15 3,15 30 65 36 3,15
A1211-1/8IN 3,175 1/8“ 30 65 36 3,175
A1211TIN-3.2 A1211-3.2 3,2 30 65 36 3,2
A1211-3.25 3,25 30 65 36 3,25
A1211-NO30 3,264 No. 30 30 65 36 3,264
A1211TIN-3.3 A1211-3.3 3,3 30 65 36 3,3
A1211-3.35 3,35 30 65 36 3,35
A1211TIN-3.4 A1211-3.4 3,4 33 70 39 3,4
A1211-3.45 3,45 33 70 39 3,45
A1211-NO29 3,454 No. 29 33 70 39 3,454
A1211TIN-3.5 A1211-3.5 3,5 33 70 39 3,5
A1211-3.55 3,55 33 70 39 3,55
A1211-NO28 3,569 No. 28 33 70 39 3,569
A1211-9/64IN 3,572 9/64“ 33 70 39 3,572
A1211TIN-3.6 A1211-3.6 3,6 33 70 39 3,6
A1211-3.65 3,65 33 70 39 3,65
A1211-NO27 3,658 No. 27 33 70 39 3,658
A1211TIN-3.7 A1211-3.7 3,7 33 70 39 3,7
A1211-NO26 3,734 No. 26 33 70 39 3,734
A1211-3.75 3,75 33 70 39 3,75
A1211-NO25 3,797 No. 25 36 75 43 3,797
A1211TIN-3.8 A1211-3.8 3,8 36 75 43 3,8
A1211-NO24 3,861 No. 24 36 75 43 3,861
A1211TIN-3.9 A1211-3.9 3,9 36 75 43 3,9
A1211-NO23 3,912 No. 23 36 75 43 3,912
A1211-3.95 3,95 36 75 43 3,95
A1211-5/32IN 3,969 5/32“ 36 75 43 3,969
A1211-NO22 3,988 No. 22 36 75 43 3,988
A1211TIN-4 A1211-4 4 36 75 43 4
A1211-NO21 4,039 No. 21 36 75 43 4,039
A1211-4.05 4,05 36 75 43 4,05
A1211-NO20 4,089 No. 20 36 75 43 4,089
A1211TIN-4.1 A1211-4.1 4,1 36 75 43 4,1
A1211-4.15 4,15 36 75 43 4,15
A1211TIN-4.2 A1211-4.2 4,2 36 75 43 4,2
A1211-NO19 4,216 No. 19 36 75 43 4,216
A1211-4.25 4,25 36 75 43 4,25
A1211TIN-4.3 A1211-4.3 4,3 39 80 47 4,3
A1211-NO18 4,305 No. 18 39 80 47 4,305
A1211-4.35 4,35 39 80 47 4,35
A1211-11/64IN 4,366 11/64“ 39 80 47 4,366
A1211-NO17 4,394 No. 17 39 80 47 4,394
A1211TIN-4.4 A1211-4.4 4,4 39 80 47 4,4
A1211-4.45 4,45 39 80 47 4,45
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
A1211TIN-4.5 A1211-4.5 4,5 39 80 47 4,5
Dc d1 A1211-4.55 4,55 39 80 47 4,55
A1211-NO15 4,572 No. 15 39 80 47 4,572
Lc A1211TIN-4.6 A1211-4.6 4,6 39 80 47 4,6
l2
l1 A1211-NO14 4,623 No. 14 39 80 47 4,623
A1211-4.65 4,65 39 80 47 4,65
A1211-NO13 4,699 No. 13 39 80 47 4,699
A1211TIN-4.7 A1211-4.7 4,7 39 80 47 4,7
A1211-4.75 4,75 39 80 47 4,75
A1211-3/16IN 4,763 3/16“ 44 86 52 4,763
A1211TIN-4.8 A1211-4.8 4,8 44 86 52 4,8
A1211-NO12 4,801 No. 12 44 86 52 4,801
A1211-4.85 4,85 44 86 52 4,85
A1211-NO11 4,851 No. 11 44 86 52 4,851
A1211TIN-4.9 A1211-4.9 4,9 44 86 52 4,9
A1211-NO10 4,915 No. 10 44 86 52 4,915
A1211-4.95 4,95 44 86 52 4,95
A1211-NO9 4,978 No. 09 44 86 52 4,978
A1211TIN-5 A1211-5 5 44 86 52 5
A1211-5.05 5,05 44 86 52 5,05
A1211-NO8 5,055 No. 08 44 86 52 5,055
A1211TIN-5.1 A1211-5.1 5,1 44 86 52 5,1
A1211-NO7 5,105 No. 07 44 86 52 5,105
A1211-5.15 5,15 44 86 52 5,15
A1211-13/64IN 5,159 13/64“ 44 86 52 5,159
A1211-NO6 5,182 No. 06 44 86 52 5,182
A1211TIN-5.2 A1211-5.2 5,2 44 86 52 5,2
A1211-NO5 5,22 No. 05 44 86 52 5,22
A1211-5.25 5,25 44 86 52 5,25
A1211TIN-5.3 A1211-5.3 5,3 44 86 52 5,3
A1211-NO4 5,309 No. 04 48 93 57 5,309
A1211TIN-5.4 A1211-5.4 5,4 48 93 57 5,4
A1211-NO3 5,41 No. 03 48 93 57 5,41
A1211TIN-5.5 A1211-5.5 5,5 48 93 57 5,5
A1211-5.55 5,55 48 93 57 5,55
A1211-7/32IN 5,556 7/32“ 48 93 57 5,556
A1211TIN-5.6 A1211-5.6 5,6 48 93 57 5,6
A1211-NO2 5,613 No. 02 48 93 57 5,613
A1211TIN-5.7 A1211-5.7 5,7 48 93 57 5,7
A1211-5.75 5,75 48 93 57 5,75
A1211-NO1 5,791 No. 01 48 93 57 5,791
A1211TIN-5.8 A1211-5.8 5,8 48 93 57 5,8
A1211TIN-5.9 A1211-5.9 5,9 48 93 57 5,9
A1211-LET.A 5,944 Let.A 48 93 57 5,944
A1211-5.95 5,95 48 93 57 5,95
A1211-15/64IN 5,953 15/64“ 48 93 57 5,953
A1211TIN-6 A1211-6 6 48 93 57 6
A1211-LET.B 6,045 Let.B 52 101 63 6,045
A1211-6.05 6,05 52 101 63 6,05
A1211TIN-6.1 A1211-6.1 6,1 52 101 63 6,1
A1211-LET.C 6,147 Let.C 52 101 63 6,147
A1211-6.15 6,15 52 101 63 6,15
A1211TIN-6.2 A1211-6.2 6,2 52 101 63 6,2
A1211-LET.D 6,248 Let.D 52 101 63 6,248
A1211-6.25 6,25 52 101 63 6,25
A1211TIN-6.3 A1211-6.3 6,3 52 101 63 6,3
A1211-1/4IN 6,35 1/4“ 52 101 63 6,35
A1211TIN-6.4 A1211-6.4 6,4 52 101 63 6,4
A1211-6.45 6,45 52 101 63 6,45
A1211TIN-6.5 A1211-6.5 6,5 52 101 63 6,5
A1211-LET.F 6,528 Let.F 52 101 63 6,528
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1211-6.55 6,55 52 101 63 6,55
A1211TIN-6.6 A1211-6.6 6,6 52 101 63 6,6
Dc d1 A1211-LET.G 6,629 Let.G 52 101 63 6,629
A1211-6.65 6,65 52 101 63 6,65
Lc A1211TIN-6.7 A1211-6.7 6,7 52 101 63 6,7
l2
l1 A1211-17/64IN 6,747 17/64“ 57 109 69 6,747
A1211-6.75 6,75 57 109 69 6,75
A1211-LET.H 6,756 Let.H 57 109 69 6,756
A1211TIN-6.8 A1211-6.8 6,8 57 109 69 6,8
A1211TIN-6.9 A1211-6.9 6,9 57 109 69 6,9
A1211-LET.I 6,909 Let.I 57 109 69 6,909
A1211TIN-7 A1211-7 7 57 109 69 7
A1211-LET.J 7,036 Let.J 57 109 69 7,036
A1211-7.05 7,05 57 109 69 7,05
A1211TIN-7.1 A1211-7.1 7,1 57 109 69 7,1
A1211-LET.K 7,137 Let.K 57 109 69 7,137
A1211-9/32IN 7,144 9/32“ 57 109 69 7,144
A1211TIN-7.2 A1211-7.2 7,2 57 109 69 7,2
A1211-7.25 7,25 57 109 69 7,25
A1211TIN-7.3 A1211-7.3 7,3 57 109 69 7,3
A1211-LET.L 7,366 Let.L 57 109 69 7,366
A1211TIN-7.4 A1211-7.4 7,4 57 109 69 7,4
A1211-LET.M 7,493 Let.M 57 109 69 7,493
A1211TIN-7.5 A1211-7.5 7,5 57 109 69 7,5
A1211-19/64IN 7,541 19/64“ 62 117 75 7,541
A1211TIN-7.6 A1211-7.6 7,6 62 117 75 7,6
A1211-LET.N 7,671 Let.N 62 117 75 7,671
A1211TIN-7.7 A1211-7.7 7,7 62 117 75 7,7
A1211-7.75 7,75 62 117 75 7,75
A1211TIN-7.8 A1211-7.8 7,8 62 117 75 7,8
A1211TIN-7.9 A1211-7.9 7,9 62 117 75 7,9
A1211-5/16IN 7,938 5/16“ 62 117 75 7,938
A1211TIN-8 A1211-8 8 62 117 75 8
A1211-LET.O 8,026 Let.O 62 117 75 8,026
A1211-8.05 8,05 62 117 75 8,05
A1211TIN-8.1 A1211-8.1 8,1 62 117 75 8,1
A1211TIN-8.2 A1211-8.2 8,2 62 117 75 8,2
A1211-LET.P 8,204 Let.P 62 117 75 8,204
A1211-8.25 8,25 62 117 75 8,25
A1211TIN-8.3 A1211-8.3 8,3 62 117 75 8,3
A1211-21/64IN 8,334 21/64“ 62 117 75 8,334
A1211TIN-8.4 A1211-8.4 8,4 62 117 75 8,4
A1211-LET.Q 8,433 Let.Q 62 117 75 8,433
A1211TIN-8.5 A1211-8.5 8,5 62 117 75 8,5
A1211TIN-8.6 A1211-8.6 8,6 66 125 81 8,6
A1211-LET.R 8,611 Let.R 66 125 81 8,611
A1211TIN-8.7 A1211-8.7 8,7 66 125 81 8,7
A1211-11/32IN 8,731 11/32“ 66 125 81 8,731
A1211-8.75 8,75 66 125 81 8,75
A1211TIN-8.8 A1211-8.8 8,8 66 125 81 8,8
A1211-LET.S 8,839 Let.S 66 125 81 8,839
A1211TIN-8.9 A1211-8.9 8,9 66 125 81 8,9
A1211TIN-9 A1211-9 9 66 125 81 9
A1211-LET.T 9,093 Let.T 66 125 81 9,093
A1211TIN-9.1 A1211-9.1 9,1 66 125 81 9,1
A1211-23/64IN 9,128 23/64“ 66 125 81 9,128
A1211TIN-9.2 A1211-9.2 9,2 66 125 81 9,2
A1211-9.25 9,25 66 125 81 9,25
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1211TIN-9.3 A1211-9.3 9,3 66 125 81 9,3
A1211-LET.U 9,347 Let.U 66 125 81 9,347
Dc d1 A1211TIN-9.4 A1211-9.4 9,4 66 125 81 9,4
A1211TIN-9.5 A1211-9.5 9,5 66 125 81 9,5
Lc A1211-3/8IN 9,525 3/8“ 71 133 87 9,525
l2
l1 A1211-LET.V 9,576 Let.V 71 133 87 9,576
A1211TIN-9.6 A1211-9.6 9,6 71 133 87 9,6
A1211TIN-9.7 A1211-9.7 9,7 71 133 87 9,7
A1211-9.75 9,75 71 133 87 9,75
A1211TIN-9.8 A1211-9.8 9,8 71 133 87 9,8
A1211-LET.W 9,804 Let.W 71 133 87 9,804
A1211TIN-9.9 A1211-9.9 9,9 71 133 87 9,9
A1211-25/64IN 9,922 25/64“ 71 133 87 9,922
A1211TIN-10 A1211-10 10 71 133 87 10
A1211-LET.X 10,084 Let.X 71 133 87 10,084
A1211-10.1 10,1 71 133 87 10,1
A1211TIN-10.2 A1211-10.2 10,2 71 133 87 10,2
A1211-10.25 10,25 71 133 87 10,25
A1211-LET.Y 10,262 Let.Y 71 133 87 10,262
A1211-10.3 10,3 71 133 87 10,3
A1211-13/32IN 10,319 13/32“ 71 133 87 10,319
A1211-10.4 10,4 71 133 87 10,4
A1211-LET.Z 10,49 Let.Z 71 133 87 10,49
A1211TIN-10.5 A1211-10.5 10,5 71 133 87 10,5
A1211-10.6 10,6 71 133 87 10,6
A1211-10.7 10,7 76 142 94 10,7
A1211-27/64IN 10,716 27/64“ 76 142 94 10,716
A1211-10.75 10,75 76 142 94 10,75
A1211-10.8 10,8 76 142 94 10,8
A1211-10.9 10,9 76 142 94 10,9
A1211TIN-11 A1211-11 11 76 142 94 11
A1211-11.1 11,1 76 142 94 11,1
A1211-7/16IN 11,113 7/16“ 76 142 94 11,113
A1211-11.2 11,2 76 142 94 11,2
A1211-11.25 11,25 76 142 94 11,25
A1211-11.3 11,3 76 142 94 11,3
A1211-11.4 11,4 76 142 94 11,4
A1211TIN-11.5 A1211-11.5 11,5 76 142 94 11,5
A1211-29/64IN 11,509 29/64“ 76 142 94 11,509
A1211-11.6 11,6 76 142 94 11,6
A1211-11.7 11,7 76 142 94 11,7
A1211-11.75 11,75 76 142 94 11,75
A1211-11.8 11,8 76 142 94 11,8
A1211-11.9 11,9 87 151 101 11,9
A1211-15/32IN 11,906 15/32“ 87 151 101 11,906
A1211TIN-12 A1211-12 12 87 151 101 12
A1211-12.1 12,1 87 151 101 12,1
A1211-12.2 12,2 87 151 101 12,2
A1211-12.25 12,25 87 151 101 12,25
A1211-12.3 12,3 87 151 101 12,3
A1211-31/64IN 12,303 31/64“ 87 151 101 12,303
A1211-12.4 12,4 87 151 101 12,4
A1211TIN-12.5 A1211-12.5 12,5 87 151 101 12,5
A1211-12.6 12,6 87 151 101 12,6
A1211-1/2IN 12,7 1/2“ 87 151 101 12,7
A1211-12.75 12,75 87 151 101 12,75
A1211-12.8 12,8 87 151 101 12,8
A1211-12.9 12,9 87 151 101 12,9
A1211TIN-13 A1211-13 13 87 151 101 13
A1211-33/64IN 13,097 33/64“ 87 151 101 13,097
A1211-13.1 13,1 87 151 101 13,1
A1211-13.2 13,2 87 151 101 13,2
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc d1
Parallel shank A1211-13.25 13,25 94 160 108 13,25
A1211-13.3 13,3 94 160 108 13,3
Dc d1 A1211-13.4 13,4 94 160 108 13,4
A1211-17/32IN 13,494 17/32“ 94 160 108 13,494
Lc A1211TIN-13.5 A1211-13.5 13,5 94 160 108 13,5
l2
l1 A1211-13.6 13,6 94 160 108 13,6
A1211-13.7 13,7 94 160 108 13,7
A1211-13.75 13,75 94 160 108 13,75
A1211-13.8 13,8 94 160 108 13,8
A1211-35/64IN 13,891 35/64“ 94 160 108 13,891
A1211-13.9 13,9 94 160 108 13,9
A1211TIN-14 A1211-14 14 94 160 108 14
A1211-14.1 14,1 99 169 114 14,1
A1211-14.2 14,2 99 169 114 14,2
A1211-14.25 14,25 99 169 114 14,25
A1211-9/16IN 14,288 9/16“ 99 169 114 14,288
A1211-14.3 14,3 99 169 114 14,3
A1211TIN-14.5 A1211-14.5 14,5 99 169 114 14,5
A1211-37/64IN 14,684 37/64“ 99 169 114 14,684
A1211-14.75 14,75 99 169 114 14,75
A1211TIN-15 A1211-15 15 99 169 114 15
A1211-19/32IN 15,081 19/32“ 104 178 120 15,081
A1211-15.2 15,2 104 178 120 15,2
A1211-15.25 15,25 104 178 120 15,25
A1211-39/64IN 15,478 39/64“ 104 178 120 15,478
A1211-15.5 15,5 104 178 120 15,5
A1211-15.75 15,75 104 178 120 15,75
A1211-5/8IN 15,875 5/8“ 104 178 120 15,875
A1211TIN-16 A1211-16 16 104 178 120 16
A1211-41/64IN 16,272 41/64“ 108 184 125 16,272
A1211-16.5 16,5 108 184 125 16,5
A1211-21/32IN 16,669 21/32“ 108 184 125 16,669
A1211-17 17 108 184 125 17
A1211-43/64IN 17,066 43/64“ 112 191 130 17,066
A1211-11/16IN 17,463 11/16“ 112 191 130 17,463
A1211-17.5 17,5 112 191 130 17,5
A1211-18 18 112 191 130 18
A1211-18.5 18,5 116 198 135 18,5
A1211-19 19 116 198 135 19
A1211-19.5 19,5 120 205 140 19,5
A1211-20 20 120 205 140 20
A1211-21 21 123 213 145 21
A1211-22 22 127 221 150 22
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
HSS twist drills
A1212
– Type H DIN
~8×Dc 338
118°
P M K N S H O
Uncoated C C
Dc d1
Parallel shank A1212-0.4 0,4 4,2 20 5 0,4
A1212-0.5 0,5 5,2 22 6 0,5
Dc d1 A1212-0.55 0,55 6,1 24 7 0,55
A1212-0.6 0,6 6,1 24 7 0,6
Lc
A1212-0.7 0,7 7,8 28 9 0,7
l2
l1 A1212-0.75 0,75 7,8 28 9 0,75
A1212-0.8 0,8 8,7 30 10 0,8
A1212-0.9 0,9 9,5 32 11 0,9
A1212-1 1 10 34 12 1
A1212-1.05 1,05 10 34 12 1,05
A1212-1.1 1,1 12 36 14 1,1
A1212-1.15 1,15 12 36 14 1,15
A1212-1.2 1,2 14 38 16 1,2
A1212-1.25 1,25 14 38 16 1,25
A1212-1.3 1,3 14 38 16 1,3
A1212-1.4 1,4 15 40 18 1,4
A1212-1.5 1,5 15 40 18 1,5
A1212-1.55 1,55 17 43 20 1,55
A1212-1.6 1,6 17 43 20 1,6
A1212-1.7 1,7 17 43 20 1,7
A1212-1.8 1,8 19 46 22 1,8
A1212-1.85 1,85 19 46 22 1,85
A1212-1.9 1,9 19 46 22 1,9
A1212-2 2 20 49 24 2
A1212-2.05 2,05 20 49 24 2,05
A1212-2.1 2,1 20 49 24 2,1
A1212-2.15 2,15 23 53 27 2,15
A1212-2.2 2,2 23 53 27 2,2
A1212-2.3 2,3 23 53 27 2,3
A1212-2.4 2,4 26 57 30 2,4
A1212-2.5 2,5 26 57 30 2,5
A1212-2.55 2,55 26 57 30 2,55
A1212-2.6 2,6 26 57 30 2,6
A1212-2.7 2,7 28 61 33 2,7
A1212-2.75 2,75 28 61 33 2,75
A1212-2.8 2,8 28 61 33 2,8
A1212-2.9 2,9 28 61 33 2,9
A1212-3 3 28 61 33 3
A1212-3.1 3,1 30 65 36 3,1
A1212-3.2 3,2 30 65 36 3,2
A1212-3.3 3,3 30 65 36 3,3
A1212-3.35 3,35 30 65 36 3,35
A1212-3.4 3,4 33 70 39 3,4
A1212-3.5 3,5 33 70 39 3,5
A1212-3.6 3,6 33 70 39 3,6
A1212-3.65 3,65 33 70 39 3,65
A1212-3.7 3,7 33 70 39 3,7
A1212-3.8 3,8 36 75 43 3,8
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1212-3.85 3,85 36 75 43 3,85
A1212-3.9 3,9 36 75 43 3,9
Dc d1 A1212-4 4 36 75 43 4
A1212-4.1 4,1 36 75 43 4,1
Lc
A1212-4.2 4,2 36 75 43 4,2
l2
l1 A1212-4.3 4,3 39 80 47 4,3
A1212-4.4 4,4 39 80 47 4,4
A1212-4.5 4,5 39 80 47 4,5
A1212-4.6 4,6 39 80 47 4,6
A1212-4.7 4,7 39 80 47 4,7
A1212-4.8 4,8 44 86 52 4,8
A1212-4.9 4,9 44 86 52 4,9
A1212-5 5 44 86 52 5
A1212-5.1 5,1 44 86 52 5,1
A1212-5.2 5,2 44 86 52 5,2
A1212-5.3 5,3 44 86 52 5,3
A1212-5.4 5,4 48 93 57 5,4
A1212-5.5 5,5 48 93 57 5,5
A1212-5.6 5,6 48 93 57 5,6
A1212-5.7 5,7 48 93 57 5,7
A1212-5.8 5,8 48 93 57 5,8
A1212-5.9 5,9 48 93 57 5,9
A1212-6 6 48 93 57 6
A1212-6.1 6,1 52 101 63 6,1
A1212-6.2 6,2 52 101 63 6,2
A1212-6.3 6,3 52 101 63 6,3
A1212-6.4 6,4 52 101 63 6,4
A1212-6.5 6,5 52 101 63 6,5
A1212-6.6 6,6 52 101 63 6,6
A1212-6.7 6,7 52 101 63 6,7
A1212-6.8 6,8 57 109 69 6,8
A1212-6.9 6,9 57 109 69 6,9
A1212-7 7 57 109 69 7
A1212-7.1 7,1 57 109 69 7,1
A1212-7.2 7,2 57 109 69 7,2
A1212-7.3 7,3 57 109 69 7,3
A1212-7.4 7,4 57 109 69 7,4
A1212-7.5 7,5 57 109 69 7,5
A1212-7.6 7,6 62 117 75 7,6
A1212-7.7 7,7 62 117 75 7,7
A1212-7.8 7,8 62 117 75 7,8
A1212-7.9 7,9 62 117 75 7,9
A1212-8 8 62 117 75 8
A1212-8.1 8,1 62 117 75 8,1
A1212-8.2 8,2 62 117 75 8,2
A1212-8.3 8,3 62 117 75 8,3
A1212-8.4 8,4 62 117 75 8,4
A1212-8.5 8,5 62 117 75 8,5
A1212-8.8 8,8 66 125 81 8,8
A1212-9 9 66 125 81 9
A1212-9.1 9,1 66 125 81 9,1
A1212-9.5 9,5 66 125 81 9,5
A1212-9.8 9,8 71 133 87 9,8
A1212-10 10 71 133 87 10
A1212-10.5 10,5 71 133 87 10,5
A1212-11 11 76 142 94 11
A1212-11.5 11,5 76 142 94 11,5
A1212-12 12 87 151 101 12
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1212-12.5 12,5 87 151 101 12,5
A1212-13 13 87 151 101 13
Dc d1 A1212-14 14 94 160 108 14
A1212-15 15 99 169 114 15
Lc
A1212-16 16 104 178 120 16
l2
l1
D1 B 476 B 482

Solid drilling
B1
HSS deep-hole drills
A1234
UFL®

~8×Dc 338
130° LH
P M K N S H O
Dc d1
A1234-NO58 1,067 No. 58 12 36 14 1,067
Dc d1 A1234-NO57 1,092 No. 57 12 36 14 1,092
A1234-NO56 1,181 No. 56 14 38 16 1,181
Lc
A1234-NO55 1,321 No. 55 15 40 18 1,321
l2
l1 A1234-NO54 1,397 No. 54 15 40 18 1,397
A1234-1.5 1,5 15 40 18 1,5
A1234-1/16IN 1,588 1/16“ 17 43 20 1,588
A1234-1.6 1,6 17 43 20 1,6
A1234-NO52 1,613 No. 52 17 43 20 1,613
A1234-1.7 1,7 17 43 20 1,7
A1234-NO51 1,702 No. 51 19 46 22 1,702
A1234-1.8 1,8 19 46 22 1,8
A1234-NO49 1,854 No. 49 19 46 22 1,854
A1234-1.9 1,9 19 46 22 1,9
A1234-NO48 1,93 No. 48 20 49 24 1,93
A1234-5/64IN 1,984 5/64“ 20 49 24 1,984
A1234-2 2 20 49 24 2
A1234-NO46 2,057 No. 46 20 49 24 2,057
A1234-NO45 2,083 No. 45 20 49 24 2,083
A1234-2.1 2,1 20 49 24 2,1
A1234-NO44 2,184 No. 44 23 53 27 2,184
A1234-2.2 2,2 23 53 27 2,2
A1234-NO43 2,261 No. 43 23 53 27 2,261
A1234-2.3 2,3 23 53 27 2,3
A1234-NO42 2,375 No. 42 26 57 30 2,375
A1234-3/32IN 2,381 3/32“ 26 57 30 2,381
A1234-2.4 2,4 26 57 30 2,4
A1234-NO41 2,438 No. 41 26 57 30 2,438
A1234-NO40 2,489 No. 40 26 57 30 2,489
A1234-2.5 2,5 26 57 30 2,5
A1234-NO39 2,527 No. 39 26 57 30 2,527
A1234-NO38 2,578 No. 38 26 57 30 2,578
A1234-2.6 2,6 26 57 30 2,6
A1234-NO37 2,642 No. 37 26 57 30 2,642
A1234-2.7 2,7 28 61 33 2,7
A1234-NO36 2,705 No. 36 28 61 33 2,705
A1234-7/64IN 2,778 7/64“ 28 61 33 2,778
A1234-2.8 2,8 28 61 33 2,8
A1234-NO34 2,819 No. 34 28 61 33 2,819
A1234-2.9 2,9 28 61 33 2,9
A1234-NO32 2,946 No. 32 28 61 33 2,946
A1234-3 3 28 61 33 3
A1234-NO31 3,048 No. 31 30 65 36 3,048
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1234-3.1 3,1 30 65 36 3,1
A1234-1/8IN 3,175 1/8“ 30 65 36 3,175
Dc d1 A1234-3.2 3,2 30 65 36 3,2
A1234-NO30 3,264 No. 30 30 65 36 3,264
Lc
A1234-3.3 3,3 30 65 36 3,3
l2
l1 A1234-3.4 3,4 33 70 39 3,4
A1234-NO29 3,454 No. 29 33 70 39 3,454
A1234-3.5 3,5 33 70 39 3,5
A1234-NO28 3,569 No. 28 33 70 39 3,569
A1234-9/64IN 3,572 9/64“ 33 70 39 3,572
A1234-3.6 3,6 33 70 39 3,6
A1234-NO27 3,658 No. 27 33 70 39 3,658
A1234-3.7 3,7 33 70 39 3,7
A1234-NO26 3,734 No. 26 33 70 39 3,734
A1234-NO25 3,797 No. 25 36 75 43 3,797
A1234-3.8 3,8 36 75 43 3,8
A1234-3.9 3,9 36 75 43 3,9
A1234-5/32IN 3,969 5/32“ 36 75 43 3,969
A1234-4 4 36 75 43 4
A1234-NO21 4,039 No. 21 36 75 43 4,039
A1234-NO20 4,089 No. 20 36 75 43 4,089
A1234-4.1 4,1 36 75 43 4,1
A1234-4.2 4,2 36 75 43 4,2
A1234-NO19 4,216 No. 19 36 75 43 4,216
A1234-4.3 4,3 39 80 47 4,3
A1234-NO18 4,305 No. 18 39 80 47 4,305
A1234-11/64IN 4,366 11/64“ 39 80 47 4,366
A1234-4.4 4,4 39 80 47 4,4
A1234-NO16 4,496 No. 16 39 80 47 4,496
A1234-4.5 4,5 39 80 47 4,5
A1234-NO15 4,572 No. 15 39 80 47 4,572
A1234-4.6 4,6 39 80 47 4,6
A1234-NO14 4,623 No. 14 39 80 47 4,623
A1234-4.7 4,7 39 80 47 4,7
A1234-4.8 4,8 44 86 52 4,8
A1234-4.9 4,9 44 86 52 4,9
A1234-NO9 4,978 No. 09 44 86 52 4,978
A1234-5 5 44 86 52 5
A1234-NO8 5,055 No. 08 44 86 52 5,055
A1234-5.1 5,1 44 86 52 5,1
A1234-13/64IN 5,159 13/64“ 44 86 52 5,159
A1234-5.2 5,2 44 86 52 5,2
A1234-NO5 5,22 No. 05 44 86 52 5,22
A1234-5.3 5,3 44 86 52 5,3
A1234-5.4 5,4 48 93 57 5,4
A1234-NO3 5,41 No. 03 48 93 57 5,41
A1234-5.5 5,5 48 93 57 5,5
A1234-7/32IN 5,556 7/32“ 48 93 57 5,556
A1234-5.6 5,6 48 93 57 5,6
A1234-5.7 5,7 48 93 57 5,7
A1234-NO1 5,791 No. 01 48 93 57 5,791
A1234-5.8 5,8 48 93 57 5,8
A1234-5.9 5,9 48 93 57 5,9
A1234-15/64IN 5,953 15/64“ 48 93 57 5,953
A1234-6 6 48 93 57 6
A1234-6.1 6,1 52 101 63 6,1
A1234-6.2 6,2 52 101 63 6,2
A1234-6.3 6,3 52 101 63 6,3
A1234-1/4IN 6,35 1/4“ 52 101 63 6,35
A1234-6.4 6,4 52 101 63 6,4
A1234-6.5 6,5 52 101 63 6,5
A1234-6.7 6,7 52 101 63 6,7
Continued
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1234-6.8 6,8 57 109 69 6,8
Dc d1 A1234-6.9 6,9 57 109 69 6,9
A1234-7 7 57 109 69 7
Lc
A1234-9/32IN 7,144 9/32“ 57 109 69 7,144
l2
l1 A1234-7.2 7,2 57 109 69 7,2
A1234-7.4 7,4 57 109 69 7,4
A1234-7.5 7,5 57 109 69 7,5
A1234-7.9 7,9 62 117 75 7,9
A1234-5/16IN 7,938 5/16“ 62 117 75 7,938
A1234-8 8 62 117 75 8
A1234-8.1 8,1 62 117 75 8,1
A1234-8.2 8,2 62 117 75 8,2
A1234-8.3 8,3 62 117 75 8,3
A1234-8.5 8,5 62 117 75 8,5
A1234-8.6 8,6 66 125 81 8,6
A1234-8.7 8,7 66 125 81 8,7
A1234-8.8 8,8 66 125 81 8,8
A1234-9 9 66 125 81 9
A1234-9.2 9,2 66 125 81 9,2
A1234-9.5 9,5 66 125 81 9,5
A1234-3/8IN 9,525 3/8“ 71 133 87 9,525
A1234-9.8 9,8 71 133 87 9,8
A1234-25/64IN 9,922 25/64“ 71 133 87 9,922
A1234-10 10 71 133 87 10
A1234-10.2 10,2 71 133 87 10,2
A1234-13/32IN 10,319 13/32“ 71 133 87 10,319
A1234-10.5 10,5 71 133 87 10,5
A1234-11 11 76 142 94 11
A1234-29/64IN 11,509 29/64“ 76 142 94 11,509
A1234-12 12 87 151 101 12
A1234-31/64IN 12,303 31/64“ 87 151 101 12,303
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
HSS twist drills
A1231
– Type N DIN
~8×Dc 338
118° LH
P M K N S H O
Uncoated CC CC C C
Dc d1
Parallel shank A1231-0.2 0,2 2,1 19 2,5 0,2
A1231-0.25 0,25 2,5 19 3 0,25
Dc d1 A1231-0.5 0,5 5,2 22 6 0,5
A1231-0.55 0,55 6,1 24 7 0,55
Lc
A1231-0.65 0,65 6,9 26 8 0,65
l2
l1 A1231-0.7 0,7 7,8 28 9 0,7
A1231-0.75 0,75 7,8 28 9 0,75
A1231-0.8 0,8 8,7 30 10 0,8
A1231-0.85 0,85 8,7 30 10 0,85
A1231-0.9 0,9 9,5 32 11 0,9
A1231-1 1 10 34 12 1
A1231-1.05 1,05 10 34 12 1,05
A1231-1.1 1,1 12 36 14 1,1
A1231-1.15 1,15 12 36 14 1,15
A1231-1.2 1,2 14 38 16 1,2
A1231-1.25 1,25 14 38 16 1,25
A1231-1.3 1,3 14 38 16 1,3
A1231-1.35 1,35 15 40 18 1,35
A1231-1.4 1,4 15 40 18 1,4
A1231-1.45 1,45 15 40 18 1,45
A1231-1.5 1,5 15 40 18 1,5
A1231-1.55 1,55 17 43 20 1,55
A1231-1.6 1,6 17 43 20 1,6
A1231-1.65 1,65 17 43 20 1,65
A1231-1.7 1,7 17 43 20 1,7
A1231-1.75 1,75 19 46 22 1,75
A1231-1.8 1,8 19 46 22 1,8
A1231-1.9 1,9 19 46 22 1,9
A1231-1.95 1,95 20 49 24 1,95
A1231-2 2 20 49 24 2
A1231-2.05 2,05 20 49 24 2,05
A1231-2.1 2,1 20 49 24 2,1
A1231-2.15 2,15 23 53 27 2,15
A1231-2.2 2,2 23 53 27 2,2
A1231-2.25 2,25 23 53 27 2,25
A1231-2.3 2,3 23 53 27 2,3
A1231-2.35 2,35 23 53 27 2,35
A1231-2.4 2,4 26 57 30 2,4
A1231-2.5 2,5 26 57 30 2,5
A1231-2.55 2,55 26 57 30 2,55
A1231-2.6 2,6 26 57 30 2,6
A1231-2.65 2,65 26 57 30 2,65
A1231-2.7 2,7 28 61 33 2,7
A1231-2.75 2,75 28 61 33 2,75
A1231-2.8 2,8 28 61 33 2,8
A1231-2.85 2,85 28 61 33 2,85
A1231-2.9 2,9 28 61 33 2,9
A1231-2.95 2,95 28 61 33 2,95
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1231-3.05 3,05 30 65 36 3,05
Dc d1 A1231-3.1 3,1 30 65 36 3,1
A1231-3.15 3,15 30 65 36 3,15
Lc
A1231-3.2 3,2 30 65 36 3,2
l2
l1 A1231-3.25 3,25 30 65 36 3,25
A1231-3.3 3,3 30 65 36 3,3
A1231-3.35 3,35 30 65 36 3,35
A1231-3.4 3,4 33 70 39 3,4
A1231-3.5 3,5 33 70 39 3,5
A1231-3.6 3,6 33 70 39 3,6
A1231-3.65 3,65 33 70 39 3,65
A1231-3.7 3,7 33 70 39 3,7
A1231-3.75 3,75 33 70 39 3,75
A1231-3.8 3,8 36 75 43 3,8
A1231-3.85 3,85 36 75 43 3,85
A1231-3.9 3,9 36 75 43 3,9
A1231-4 4 36 75 43 4
A1231-4.05 4,05 36 75 43 4,05
A1231-4.1 4,1 36 75 43 4,1
A1231-4.15 4,15 36 75 43 4,15
A1231-4.2 4,2 36 75 43 4,2
A1231-4.25 4,25 36 75 43 4,25
A1231-4.3 4,3 39 80 47 4,3
A1231-4.35 4,35 39 80 47 4,35
A1231-4.4 4,4 39 80 47 4,4
A1231-4.5 4,5 39 80 47 4,5
A1231-4.6 4,6 39 80 47 4,6
A1231-4.65 4,65 39 80 47 4,65
A1231-4.7 4,7 39 80 47 4,7
A1231-4.8 4,8 44 86 52 4,8
A1231-4.9 4,9 44 86 52 4,9
A1231-5 5 44 86 52 5
A1231-5.1 5,1 44 86 52 5,1
A1231-5.2 5,2 44 86 52 5,2
A1231-5.3 5,3 44 86 52 5,3
A1231-5.5 5,5 48 93 57 5,5
A1231-5.7 5,7 48 93 57 5,7
A1231-5.8 5,8 48 93 57 5,8
A1231-5.9 5,9 48 93 57 5,9
A1231-6 6 48 93 57 6
A1231-6.1 6,1 52 101 63 6,1
A1231-6.2 6,2 52 101 63 6,2
A1231-6.3 6,3 52 101 63 6,3
A1231-6.4 6,4 52 101 63 6,4
A1231-6.5 6,5 52 101 63 6,5
A1231-6.8 6,8 57 109 69 6,8
A1231-6.9 6,9 57 109 69 6,9
A1231-7 7 57 109 69 7
A1231-7.1 7,1 57 109 69 7,1
A1231-7.4 7,4 57 109 69 7,4
A1231-7.5 7,5 57 109 69 7,5
A1231-7.6 7,6 62 117 75 7,6
A1231-7.7 7,7 62 117 75 7,7
A1231-8 8 62 117 75 8
A1231-8.1 8,1 62 117 75 8,1
A1231-8.3 8,3 62 117 75 8,3
A1231-8.4 8,4 62 117 75 8,4
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1231-8.5 8,5 62 117 75 8,5
A1231-8.6 8,6 66 125 81 8,6
Dc d1 A1231-8.7 8,7 66 125 81 8,7
A1231-8.8 8,8 66 125 81 8,8
Lc
A1231-9 9 66 125 81 9
l2
l1 A1231-9.3 9,3 66 125 81 9,3
A1231-9.4 9,4 66 125 81 9,4
A1231-9.5 9,5 66 125 81 9,5
A1231-9.9 9,9 71 133 87 9,9
A1231-10 10 71 133 87 10
A1231-10.1 10,1 71 133 87 10,1
A1231-10.2 10,2 71 133 87 10,2
A1231-10.3 10,3 71 133 87 10,3
A1231-10.4 10,4 71 133 87 10,4
A1231-10.5 10,5 71 133 87 10,5
A1231-10.6 10,6 71 133 87 10,6
A1231-10.7 10,7 76 142 94 10,7
A1231-10.75 10,75 76 142 94 10,75
A1231-11 11 76 142 94 11
A1231-11.5 11,5 76 142 94 11,5
A1231-11.6 11,6 76 142 94 11,6
A1231-11.7 11,7 76 142 94 11,7
A1231-11.75 11,75 76 142 94 11,75
A1231-12 12 87 151 101 12
A1231-12.1 12,1 87 151 101 12,1
A1231-12.2 12,2 87 151 101 12,2
A1231-12.25 12,25 87 151 101 12,25
A1231-12.5 12,5 87 151 101 12,5
A1231-12.7 12,7 87 151 101 12,7
A1231-12.8 12,8 87 151 101 12,8
A1231-13 13 87 151 101 13
A1231-13.1 13,1 87 151 101 13,1
A1231-13.2 13,2 87 151 101 13,2
A1231-13.5 13,5 94 160 108 13,5
A1231-13.8 13,8 94 160 108 13,8
A1231-14 14 94 160 108 14
A1231-14.2 14,2 99 169 114 14,2
A1231-14.3 14,3 99 169 114 14,3
A1231-14.4 14,4 99 169 114 14,4
A1231-14.5 14,5 99 169 114 14,5
A1231-14.75 14,75 99 169 114 14,75
A1231-14.8 14,8 99 169 114 14,8
A1231-14.9 14,9 99 169 114 14,9
A1231-15 15 99 169 114 15
A1231-15.5 15,5 104 178 120 15,5
A1231-16 16 104 178 120 16
A1231-16.5 16,5 108 184 125 16,5
A1231-17 17 108 184 125 17
A1231-17.5 17,5 112 191 130 17,5
A1231-18 18 112 191 130 18
A1231-18.5 18,5 116 198 135 18,5
A1231-19 19 116 198 135 19
A1231-20 20 120 205 140 20
D1 B 476 B 482

Solid drilling
B1
HSS-E deep-hole drills, long
A1549TFP
UFL®
DIN
~12×Dc 340
130°
P M K N S H O
TFP CC CC CC CC C C
Dc d1
TFP mm mm mm mm mm
Parallel shank A1549TFP-1 1 31 56 33 1
A1549TFP-1.1 1,1 35 60 37 1,1
Dc d1 A1549TFP-1.2 1,2 39 65 41 1,2
A1549TFP-1.3 1,3 39 65 41 1,3
Lc
A1549TFP-1.4 1,4 42 70 45 1,4
l2
l1 A1549TFP-1.5 1,5 42 70 45 1,5
A1549TFP-1.6 1,6 47 76 50 1,6
A1549TFP-1.7 1,7 47 76 50 1,7
A1549TFP-1.8 1,8 50 80 53 1,8
A1549TFP-1.9 1,9 50 80 53 1,9
A1549TFP-2 2 52 85 56 2
A1549TFP-2.1 2,1 52 85 56 2,1
A1549TFP-2.2 2,2 55 90 59 2,2
A1549TFP-2.3 2,3 55 90 59 2,3
A1549TFP-2.4 2,4 58 95 62 2,4
A1549TFP-2.5 2,5 58 95 62 2,5
A1549TFP-2.6 2,6 58 95 62 2,6
A1549TFP-2.7 2,7 61 100 66 2,7
A1549TFP-2.8 2,8 61 100 66 2,8
A1549TFP-2.9 2,9 61 100 66 2,9
A1549TFP-3 3 61 100 66 3
A1549TFP-3.1 3,1 63 106 69 3,1
A1549TFP-3.2 3,2 63 106 69 3,2
A1549TFP-3.3 3,3 63 106 69 3,3
A1549TFP-3.4 3,4 67 112 73 3,4
A1549TFP-3.5 3,5 67 112 73 3,5
A1549TFP-3.6 3,6 67 112 73 3,6
A1549TFP-3.7 3,7 67 112 73 3,7
A1549TFP-3.8 3,8 71 119 78 3,8
A1549TFP-3.9 3,9 71 119 78 3,9
A1549TFP-4 4 71 119 78 4
A1549TFP-4.1 4,1 71 119 78 4,1
A1549TFP-4.2 4,2 71 119 78 4,2
A1549TFP-4.3 4,3 74 126 82 4,3
A1549TFP-4.4 4,4 74 126 82 4,4
A1549TFP-4.5 4,5 74 126 82 4,5
A1549TFP-4.6 4,6 74 126 82 4,6
A1549TFP-4.7 4,7 74 126 82 4,7
A1549TFP-4.8 4,8 79 132 87 4,8
A1549TFP-4.9 4,9 79 132 87 4,9
A1549TFP-5 5 79 132 87 5
A1549TFP-5.1 5,1 79 132 87 5,1
A1549TFP-5.2 5,2 79 132 87 5,2
A1549TFP-5.3 5,3 79 132 87 5,3
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
TFP mm mm mm mm mm
Parallel shank A1549TFP-5.4 5,4 82 139 91 5,4
A1549TFP-5.5 5,5 82 139 91 5,5
Dc d1 A1549TFP-5.6 5,6 82 139 91 5,6
A1549TFP-5.7 5,7 82 139 91 5,7
Lc
A1549TFP-5.8 5,8 82 139 91 5,8
l2
l1 A1549TFP-5.9 5,9 82 139 91 5,9
A1549TFP-6 6 82 139 91 6
A1549TFP-6.1 6,1 86 148 97 6,1
A1549TFP-6.2 6,2 86 148 97 6,2
A1549TFP-6.3 6,3 86 148 97 6,3
A1549TFP-6.4 6,4 86 148 97 6,4
A1549TFP-6.5 6,5 86 148 97 6,5
A1549TFP-6.6 6,6 86 148 97 6,6
A1549TFP-6.7 6,7 86 148 97 6,7
A1549TFP-6.8 6,8 90 156 102 6,8
A1549TFP-6.9 6,9 90 156 102 6,9
A1549TFP-7 7 90 156 102 7
A1549TFP-7.1 7,1 90 156 102 7,1
A1549TFP-7.2 7,2 90 156 102 7,2
A1549TFP-7.3 7,3 90 156 102 7,3
A1549TFP-7.4 7,4 90 156 102 7,4
A1549TFP-7.5 7,5 90 156 102 7,5
A1549TFP-7.6 7,6 96 165 109 7,6
A1549TFP-7.7 7,7 96 165 109 7,7
A1549TFP-7.8 7,8 96 165 109 7,8
A1549TFP-7.9 7,9 96 165 109 7,9
A1549TFP-8 8 96 165 109 8
A1549TFP-8.1 8,1 96 165 109 8,1
A1549TFP-8.2 8,2 96 165 109 8,2
A1549TFP-8.3 8,3 96 165 109 8,3
A1549TFP-8.4 8,4 96 165 109 8,4
A1549TFP-8.5 8,5 96 165 109 8,5
A1549TFP-8.6 8,6 100 175 115 8,6
A1549TFP-8.7 8,7 100 175 115 8,7
A1549TFP-8.8 8,8 100 175 115 8,8
A1549TFP-8.9 8,9 100 175 115 8,9
A1549TFP-9 9 100 175 115 9
A1549TFP-9.1 9,1 100 175 115 9,1
A1549TFP-9.2 9,2 100 175 115 9,2
A1549TFP-9.3 9,3 100 175 115 9,3
A1549TFP-9.4 9,4 100 175 115 9,4
A1549TFP-9.5 9,5 100 175 115 9,5
A1549TFP-9.6 9,6 105 184 121 9,6
A1549TFP-9.7 9,7 105 184 121 9,7
A1549TFP-9.8 9,8 105 184 121 9,8
A1549TFP-9.9 9,9 105 184 121 9,9
A1549TFP-10 10 105 184 121 10
A1549TFP-10.2 10,2 105 184 121 10,2
A1549TFP-10.5 10,5 105 184 121 10,5
A1549TFP-11 11 110 195 128 11
A1549TFP-11.5 11,5 110 195 128 11,5
A1549TFP-12 12 120 205 134 12
XIII D1 B 476 B 482

Solid drilling
B1
HSS-E twist drills, long
A1547
Alpha® XE

~12×Dc 340
130°
P M K N S H O
Uncoated C CC CC C CC C
Dc d1
A1547-NO60 1,016 No. 60 31 56 33 1,016
Dc d1 A1547-NO59 1,041 No. 59 31 56 33 1,041
A1547-NO58 1,067 No. 58 35 60 37 1,067
Lc A1547-NO57 1,092 No. 57 35 60 37 1,092
l2
l1 A1547-1.1 1,1 35 60 37 1,1
A1547-NO56 1,181 No. 56 39 65 41 1,181
A1547-3/64IN 1,191 3/64“ 39 65 41 1,191
A1547-1.2 1,2 39 65 41 1,2
A1547-1.3 1,3 39 65 41 1,3
A1547-NO55 1,321 No. 55 42 70 45 1,321
A1547-NO54 1,397 No. 54 42 70 45 1,397
A1547-1.4 1,4 42 70 45 1,4
A1547-1.5 1,5 42 70 45 1,5
A1547-NO53 1,511 No. 53 47 76 50 1,511
A1547-1/16IN 1,588 1/16“ 47 76 50 1,588
A1547-1.6 1,6 47 76 50 1,6
A1547-NO52 1,613 No. 52 47 76 50 1,613
A1547-1.7 1,7 47 76 50 1,7
A1547-NO51 1,702 No. 51 50 80 53 1,702
A1547-NO50 1,778 No. 50 50 80 53 1,778
A1547-1.8 1,8 50 80 53 1,8
A1547-NO49 1,854 No. 49 50 80 53 1,854
A1547-1.9 1,9 50 80 53 1,9
A1547-NO48 1,93 No. 48 52 85 56 1,93
A1547-5/64IN 1,984 5/64“ 52 85 56 1,984
A1547-NO47 1,994 No. 47 52 85 56 1,994
A1547-2 2 52 85 56 2
A1547-NO46 2,057 No. 46 52 85 56 2,057
A1547-NO45 2,083 No. 45 52 85 56 2,083
A1547-2.1 2,1 52 85 56 2,1
A1547-NO44 2,184 No. 44 55 90 59 2,184
A1547-2.2 2,2 55 90 59 2,2
A1547-NO43 2,261 No. 43 55 90 59 2,261
A1547-2.3 2,3 55 90 59 2,3
A1547-NO42 2,375 No. 42 58 95 62 2,375
A1547-3/32IN 2,381 3/32“ 58 95 62 2,381
A1547-2.4 2,4 58 95 62 2,4
A1547-NO41 2,438 No. 41 58 95 62 2,438
A1547-NO40 2,489 No. 40 58 95 62 2,489
A1547-2.5 2,5 58 95 62 2,5
A1547-NO39 2,527 No. 39 58 95 62 2,527
A1547-NO38 2,578 No. 38 58 95 62 2,578
A1547-2.6 2,6 58 95 62 2,6
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1547-2.7 2,7 61 100 66 2,7
Dc d1 A1547-NO36 2,705 No. 36 61 100 66 2,705
A1547-7/64IN 2,778 7/64“ 61 100 66 2,778
Lc A1547-NO35 2,794 No. 35 61 100 66 2,794
l2
l1 A1547-2.8 2,8 61 100 66 2,8
A1547-NO34 2,819 No. 34 61 100 66 2,819
A1547-NO33 2,87 No. 33 61 100 66 2,87
A1547-2.9 2,9 61 100 66 2,9
A1547-NO32 2,946 No. 32 61 100 66 2,946
A1547-3 3 61 100 66 3
A1547-NO31 3,048 No. 31 63 106 69 3,048
A1547-3.1 3,1 63 106 69 3,1
A1547-1/8IN 3,175 1/8“ 63 106 69 3,175
A1547-3.2 3,2 63 106 69 3,2
A1547-NO30 3,264 No. 30 63 106 69 3,264
A1547-3.3 3,3 63 106 69 3,3
A1547-3.4 3,4 67 112 73 3,4
A1547-3.5 3,5 67 112 73 3,5
A1547-9/64IN 3,572 9/64“ 67 112 73 3,572
A1547-3.6 3,6 67 112 73 3,6
A1547-3.7 3,7 67 112 73 3,7
A1547-3.8 3,8 71 119 78 3,8
A1547-3.9 3,9 71 119 78 3,9
A1547-5/32IN 3,969 5/32“ 71 119 78 3,969
A1547-4 4 71 119 78 4
A1547-4.1 4,1 71 119 78 4,1
A1547-4.2 4,2 71 119 78 4,2
A1547-4.3 4,3 74 126 82 4,3
A1547-11/64IN 4,366 11/64“ 74 126 82 4,366
A1547-4.4 4,4 74 126 82 4,4
A1547-4.5 4,5 74 126 82 4,5
A1547-4.6 4,6 74 126 82 4,6
A1547-4.7 4,7 74 126 82 4,7
A1547-3/16IN 4,763 3/16“ 79 132 87 4,763
A1547-4.8 4,8 79 132 87 4,8
A1547-4.9 4,9 79 132 87 4,9
A1547-5 5 79 132 87 5
A1547-5.1 5,1 79 132 87 5,1
A1547-13/64IN 5,159 13/64“ 79 132 87 5,159
A1547-5.2 5,2 79 132 87 5,2
A1547-5.3 5,3 79 132 87 5,3
A1547-5.4 5,4 82 139 91 5,4
A1547-5.5 5,5 82 139 91 5,5
A1547-7/32IN 5,556 7/32“ 82 139 91 5,556
A1547-5.6 5,6 82 139 91 5,6
A1547-5.7 5,7 82 139 91 5,7
A1547-5.8 5,8 82 139 91 5,8
A1547-5.9 5,9 82 139 91 5,9
A1547-15/64IN 5,953 15/64“ 82 139 91 5,953
A1547-6 6 82 139 91 6
A1547-6.1 6,1 86 148 97 6,1
A1547-6.2 6,2 86 148 97 6,2
A1547-6.3 6,3 86 148 97 6,3
A1547-1/4IN 6,35 1/4“ 86 148 97 6,35
A1547-6.4 6,4 86 148 97 6,4
A1547-6.5 6,5 86 148 97 6,5
A1547-6.6 6,6 86 148 97 6,6
A1547-6.7 6,7 86 148 97 6,7
A1547-17/64IN 6,747 17/64“ 90 156 102 6,747
A1547-6.8 6,8 90 156 102 6,8
A1547-7 7 90 156 102 7
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1547-7.1 7,1 90 156 102 7,1
A1547-9/32IN 7,144 9/32“ 90 156 102 7,144
Dc d1 A1547-7.2 7,2 90 156 102 7,2
A1547-7.3 7,3 90 156 102 7,3
Lc A1547-7.4 7,4 90 156 102 7,4
l2
l1 A1547-7.5 7,5 90 156 102 7,5
A1547-19/64IN 7,541 19/64“ 96 165 109 7,541
A1547-7.6 7,6 96 165 109 7,6
A1547-7.7 7,7 96 165 109 7,7
A1547-7.8 7,8 96 165 109 7,8
A1547-7.9 7,9 96 165 109 7,9
A1547-5/16IN 7,938 5/16“ 96 165 109 7,938
A1547-8 8 96 165 109 8
A1547-8.1 8,1 96 165 109 8,1
A1547-8.2 8,2 96 165 109 8,2
A1547-8.3 8,3 96 165 109 8,3
A1547-21/64IN 8,334 21/64“ 96 165 109 8,334
A1547-8.4 8,4 96 165 109 8,4
A1547-8.5 8,5 96 165 109 8,5
A1547-8.6 8,6 100 175 115 8,6
A1547-8.7 8,7 100 175 115 8,7
A1547-11/32IN 8,731 11/32“ 100 175 115 8,731
A1547-8.8 8,8 100 175 115 8,8
A1547-8.9 8,9 100 175 115 8,9
A1547-9 9 100 175 115 9
A1547-23/64IN 9,128 23/64“ 100 175 115 9,128
A1547-3/8IN 9,525 3/8“ 105 184 121 9,525
A1547-25/64IN 9,922 25/64“ 105 184 121 9,922
A1547-10 10 105 184 121 10
A1547-10.2 10,2 105 184 121 10,2
A1547-13/32IN 10,319 13/32“ 105 184 121 10,319
A1547-10.5 10,5 105 184 121 10,5
A1547-27/64IN 10,716 27/64“ 110 195 128 10,716
A1547-11 11 110 195 128 11
A1547-7/16IN 11,113 7/16“ 110 195 128 11,113
A1547-11.5 11,5 110 195 128 11,5
A1547-29/64IN 11,509 29/64“ 110 195 128 11,509
A1547-15/32IN 11,906 15/32“ 120 205 134 11,906
A1547-12 12 120 205 134 12
A1547-31/64IN 12,303 31/64“ 120 205 134 12,303
A1547-1/2IN 12,7 1/2“ 120 205 134 12,7
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
HSS-E twist drills, long
A1544
VA
DIN
~12×Dc 340
130°
P M K N S H O
Uncoated C CC C CC
Dc d1
A1544-1.1 1,1 35 60 37 1,1
Dc d1 A1544-1.2 1,2 39 65 41 1,2
A1544-1.3 1,3 39 65 41 1,3
Lc A1544-1.4 1,4 42 70 45 1,4
l2
l1 A1544-1.5 1,5 42 70 45 1,5
A1544-1.6 1,6 47 76 50 1,6
A1544-1.7 1,7 47 76 50 1,7
A1544-1.8 1,8 50 80 53 1,8
A1544-1.9 1,9 50 80 53 1,9
A1544-2 2 52 85 56 2
A1544-2.1 2,1 52 85 56 2,1
A1544-2.2 2,2 55 90 59 2,2
A1544-2.3 2,3 55 90 59 2,3
A1544-2.4 2,4 58 95 62 2,4
A1544-2.5 2,5 58 95 62 2,5
A1544-2.6 2,6 58 95 62 2,6
A1544-2.7 2,7 61 100 66 2,7
A1544-2.8 2,8 61 100 66 2,8
A1544-2.9 2,9 61 100 66 2,9
A1544-3 3 61 100 66 3
A1544-3.1 3,1 63 106 69 3,1
A1544-3.2 3,2 63 106 69 3,2
A1544-3.3 3,3 63 106 69 3,3
A1544-3.4 3,4 67 112 73 3,4
A1544-3.5 3,5 67 112 73 3,5
A1544-3.6 3,6 67 112 73 3,6
A1544-3.7 3,7 67 112 73 3,7
A1544-3.8 3,8 71 119 78 3,8
A1544-3.9 3,9 71 119 78 3,9
A1544-4 4 71 119 78 4
A1544-4.1 4,1 71 119 78 4,1
A1544-4.2 4,2 71 119 78 4,2
A1544-4.3 4,3 74 126 82 4,3
A1544-4.4 4,4 74 126 82 4,4
A1544-4.5 4,5 74 126 82 4,5
A1544-4.6 4,6 74 126 82 4,6
A1544-4.7 4,7 74 126 82 4,7
A1544-4.8 4,8 79 132 87 4,8
A1544-4.9 4,9 79 132 87 4,9
A1544-5 5 79 132 87 5
A1544-5.1 5,1 79 132 87 5,1
A1544-5.2 5,2 79 132 87 5,2
A1544-5.3 5,3 79 132 87 5,3
A1544-5.4 5,4 82 139 91 5,4
A1544-5.5 5,5 82 139 91 5,5
A1544-5.6 5,6 82 139 91 5,6
A1544-5.7 5,7 82 139 91 5,7
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1544-5.8 5,8 82 139 91 5,8
A1544-5.9 5,9 82 139 91 5,9
Dc d1 A1544-6 6 82 139 91 6
A1544-6.1 6,1 86 148 97 6,1
Lc A1544-6.2 6,2 86 148 97 6,2
l2
l1 A1544-6.3 6,3 86 148 97 6,3
A1544-6.4 6,4 86 148 97 6,4
A1544-6.5 6,5 86 148 97 6,5
A1544-6.6 6,6 86 148 97 6,6
A1544-6.7 6,7 86 148 97 6,7
A1544-6.8 6,8 90 156 102 6,8
A1544-6.9 6,9 90 156 102 6,9
A1544-7 7 90 156 102 7
A1544-7.1 7,1 90 156 102 7,1
A1544-7.2 7,2 90 156 102 7,2
A1544-7.3 7,3 90 156 102 7,3
A1544-7.4 7,4 90 156 102 7,4
A1544-7.5 7,5 90 156 102 7,5
A1544-7.6 7,6 96 165 109 7,6
A1544-7.7 7,7 96 165 109 7,7
A1544-7.8 7,8 96 165 109 7,8
A1544-7.9 7,9 96 165 109 7,9
A1544-8 8 96 165 109 8
A1544-8.1 8,1 96 165 109 8,1
A1544-8.2 8,2 96 165 109 8,2
A1544-8.3 8,3 96 165 109 8,3
A1544-8.4 8,4 96 165 109 8,4
A1544-8.5 8,5 96 165 109 8,5
A1544-8.6 8,6 100 175 115 8,6
A1544-8.7 8,7 100 175 115 8,7
A1544-8.8 8,8 100 175 115 8,8
A1544-8.9 8,9 100 175 115 8,9
A1544-9 9 100 175 115 9
A1544-9.1 9,1 100 175 115 9,1
A1544-9.2 9,2 100 175 115 9,2
A1544-9.3 9,3 100 175 115 9,3
A1544-9.4 9,4 100 175 115 9,4
A1544-9.5 9,5 100 175 115 9,5
A1544-9.6 9,6 105 184 121 9,6
A1544-9.7 9,7 105 184 121 9,7
A1544-9.8 9,8 105 184 121 9,8
A1544-9.9 9,9 105 184 121 9,9
A1544-10 10 105 184 121 10
A1544-10.2 10,2 105 184 121 10,2
A1544-10.5 10,5 105 184 121 10,5
A1544-10.8 10,8 110 195 128 10,8
A1544-11 11 110 195 128 11
A1544-11.2 11,2 110 195 128 11,2
A1544-11.5 11,5 110 195 128 11,5
A1544-11.8 11,8 110 195 128 11,8
A1544-12 12 120 205 134 12
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
HSS deep-hole drills, long
A1522
UFL®

~12×Dc 340
130°
P M K N S H O
Dc d1
A1522-NO60 1,016 No. 60 31 56 33 1,016
Dc d1 A1522-NO59 1,041 No. 59 31 56 33 1,041
A1522-NO58 1,067 No. 58 35 60 37 1,067
Lc
A1522-NO57 1,092 No. 57 35 60 37 1,092
l2
l1 A1522-1.1 1,1 35 60 37 1,1
A1522-NO56 1,181 No. 56 39 65 41 1,181
A1522-3/64IN 1,191 3/64“ 39 65 41 1,191
A1522-1.2 1,2 39 65 41 1,2
A1522-1.3 1,3 39 65 41 1,3
A1522-NO55 1,321 No. 55 42 70 45 1,321
A1522-NO54 1,397 No. 54 42 70 45 1,397
A1522-1.4 1,4 42 70 45 1,4
A1522-1.5 1,5 42 70 45 1,5
A1522-NO53 1,511 No. 53 47 76 50 1,511
A1522-1/16IN 1,588 1/16“ 47 76 50 1,588
A1522-1.6 1,6 47 76 50 1,6
A1522-NO52 1,613 No. 52 47 76 50 1,613
A1522-1.7 1,7 47 76 50 1,7
A1522-NO51 1,702 No. 51 50 80 53 1,702
A1522-NO50 1,778 No. 50 50 80 53 1,778
A1522-1.8 1,8 50 80 53 1,8
A1522-NO49 1,854 No. 49 50 80 53 1,854
A1522-1.9 1,9 50 80 53 1,9
A1522-NO48 1,93 No. 48 52 85 56 1,93
A1522-5/64IN 1,984 5/64“ 52 85 56 1,984
A1522-NO47 1,994 No. 47 52 85 56 1,994
A1522-2 2 52 85 56 2
A1522-NO46 2,057 No. 46 52 85 56 2,057
A1522-NO45 2,083 No. 45 52 85 56 2,083
A1522-2.1 2,1 52 85 56 2,1
A1522-NO44 2,184 No. 44 55 90 59 2,184
A1522-2.2 2,2 55 90 59 2,2
A1522-NO43 2,261 No. 43 55 90 59 2,261
A1522-2.3 2,3 55 90 59 2,3
A1522-NO42 2,375 No. 42 58 95 62 2,375
A1522-3/32IN 2,381 3/32“ 58 95 62 2,381
A1522-2.4 2,4 58 95 62 2,4
A1522-NO41 2,438 No. 41 58 95 62 2,438
A1522-NO40 2,489 No. 40 58 95 62 2,489
A1522-2.5 2,5 58 95 62 2,5
A1522-NO39 2,527 No. 39 58 95 62 2,527
A1522-NO38 2,578 No. 38 58 95 62 2,578
A1522-2.6 2,6 58 95 62 2,6
A1522-NO37 2,642 No. 37 58 95 62 2,642
A1522-2.7 2,7 61 100 66 2,7
A1522-NO36 2,705 No. 36 61 100 66 2,705
A1522-7/64IN 2,778 7/64“ 61 100 66 2,778
Continued
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1522-2.8 2,8 61 100 66 2,8
Dc d1 A1522-NO34 2,819 No. 34 61 100 66 2,819
A1522-NO33 2,87 No. 33 61 100 66 2,87
Lc
A1522-2.9 2,9 61 100 66 2,9
l2
l1 A1522-NO32 2,946 No. 32 61 100 66 2,946
A1522-3 3 61 100 66 3
A1522-NO31 3,048 No. 31 63 106 69 3,048
A1522-3.1 3,1 63 106 69 3,1
A1522-1/8IN 3,175 1/8“ 63 106 69 3,175
A1522-3.2 3,2 63 106 69 3,2
A1522-NO30 3,264 No. 30 63 106 69 3,264
A1522-3.3 3,3 63 106 69 3,3
A1522-3.4 3,4 67 112 73 3,4
A1522-NO29 3,454 No. 29 67 112 73 3,454
A1522-3.5 3,5 67 112 73 3,5
A1522-NO28 3,569 No. 28 67 112 73 3,569
A1522-9/64IN 3,572 9/64“ 67 112 73 3,572
A1522-3.6 3,6 67 112 73 3,6
A1522-NO27 3,658 No. 27 67 112 73 3,658
A1522-3.7 3,7 67 112 73 3,7
A1522-NO26 3,734 No. 26 67 112 73 3,734
A1522-NO25 3,797 No. 25 71 119 78 3,797
A1522-3.8 3,8 71 119 78 3,8
A1522-NO24 3,861 No. 24 71 119 78 3,861
A1522-3.9 3,9 71 119 78 3,9
A1522-NO23 3,912 No. 23 71 119 78 3,912
A1522-5/32IN 3,969 5/32“ 71 119 78 3,969
A1522-NO22 3,988 No. 22 71 119 78 3,988
A1522-4 4 71 119 78 4
A1522-NO21 4,039 No. 21 71 119 78 4,039
A1522-NO20 4,089 No. 20 71 119 78 4,089
A1522-4.1 4,1 71 119 78 4,1
A1522-4.2 4,2 71 119 78 4,2
A1522-NO19 4,216 No. 19 71 119 78 4,216
A1522-4.3 4,3 74 126 82 4,3
A1522-NO18 4,305 No. 18 74 126 82 4,305
A1522-11/64IN 4,366 11/64“ 74 126 82 4,366
A1522-NO17 4,394 No. 17 74 126 82 4,394
A1522-4.4 4,4 74 126 82 4,4
A1522-NO16 4,496 No. 16 74 126 82 4,496
A1522-4.5 4,5 74 126 82 4,5
A1522-NO15 4,572 No. 15 74 126 82 4,572
A1522-4.6 4,6 74 126 82 4,6
A1522-NO14 4,623 No. 14 74 126 82 4,623
A1522-NO13 4,699 No. 13 74 126 82 4,699
A1522-4.7 4,7 74 126 82 4,7
A1522-3/16IN 4,763 3/16“ 79 132 87 4,763
A1522-4.8 4,8 79 132 87 4,8
A1522-NO12 4,801 No. 12 79 132 87 4,801
A1522-NO11 4,851 No. 11 79 132 87 4,851
A1522-4.9 4,9 79 132 87 4,9
A1522-NO10 4,915 No. 10 79 132 87 4,915
A1522-NO9 4,978 No. 09 79 132 87 4,978
A1522-5 5 79 132 87 5
A1522-NO8 5,055 No. 08 79 132 87 5,055
A1522-5.1 5,1 79 132 87 5,1
A1522-NO7 5,105 No. 07 79 132 87 5,105
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
A1522-NO6 5,182 No. 06 79 132 87 5,182
Dc d1 A1522-5.2 5,2 79 132 87 5,2
A1522-NO5 5,22 No. 05 79 132 87 5,22
Lc
A1522-5.3 5,3 79 132 87 5,3
l2
l1 A1522-NO4 5,309 No. 04 82 139 91 5,309
A1522-5.4 5,4 82 139 91 5,4
A1522-NO3 5,41 No. 03 82 139 91 5,41
A1522-5.5 5,5 82 139 91 5,5
A1522-7/32IN 5,556 7/32“ 82 139 91 5,556
A1522-5.6 5,6 82 139 91 5,6
A1522-NO2 5,613 No. 02 82 139 91 5,613
A1522-5.7 5,7 82 139 91 5,7
A1522-NO1 5,791 No. 01 82 139 91 5,791
A1522-5.8 5,8 82 139 91 5,8
A1522-5.9 5,9 82 139 91 5,9
A1522-15/64IN 5,953 15/64“ 82 139 91 5,953
A1522-6 6 82 139 91 6
A1522-6.1 6,1 86 148 97 6,1
A1522-6.2 6,2 86 148 97 6,2
A1522-6.3 6,3 86 148 97 6,3
A1522-1/4IN 6,35 1/4“ 86 148 97 6,35
A1522-6.4 6,4 86 148 97 6,4
A1522-6.5 6,5 86 148 97 6,5
A1522-6.6 6,6 86 148 97 6,6
A1522-6.7 6,7 86 148 97 6,7
A1522-17/64IN 6,747 17/64“ 90 156 102 6,747
A1522-6.8 6,8 90 156 102 6,8
A1522-6.9 6,9 90 156 102 6,9
A1522-7 7 90 156 102 7
A1522-7.1 7,1 90 156 102 7,1
A1522-9/32IN 7,144 9/32“ 90 156 102 7,144
A1522-7.2 7,2 90 156 102 7,2
A1522-7.3 7,3 90 156 102 7,3
A1522-7.4 7,4 90 156 102 7,4
A1522-7.5 7,5 90 156 102 7,5
A1522-19/64IN 7,541 19/64“ 96 165 109 7,541
A1522-7.6 7,6 96 165 109 7,6
A1522-7.7 7,7 96 165 109 7,7
A1522-7.8 7,8 96 165 109 7,8
A1522-7.9 7,9 96 165 109 7,9
A1522-5/16IN 7,938 5/16“ 96 165 109 7,938
A1522-8 8 96 165 109 8
A1522-8.1 8,1 96 165 109 8,1
A1522-8.2 8,2 96 165 109 8,2
A1522-8.3 8,3 96 165 109 8,3
A1522-21/64IN 8,334 21/64“ 96 165 109 8,334
A1522-8.4 8,4 96 165 109 8,4
A1522-8.5 8,5 96 165 109 8,5
A1522-8.6 8,6 100 175 115 8,6
A1522-8.7 8,7 100 175 115 8,7
A1522-11/32IN 8,731 11/32“ 100 175 115 8,731
A1522-8.8 8,8 100 175 115 8,8
A1522-8.9 8,9 100 175 115 8,9
A1522-9 9 100 175 115 9
A1522-9.1 9,1 100 175 115 9,1
A1522-23/64IN 9,128 23/64“ 100 175 115 9,128
A1522-9.2 9,2 100 175 115 9,2
A1522-9.3 9,3 100 175 115 9,3
A1522-9.4 9,4 100 175 115 9,4
A1522-9.5 9,5 100 175 115 9,5
A1522-3/8IN 9,525 3/8“ 105 184 121 9,525
Continued
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1522-9.6 9,6 105 184 121 9,6
A1522-9.7 9,7 105 184 121 9,7
Dc d1 A1522-9.8 9,8 105 184 121 9,8
A1522-9.9 9,9 105 184 121 9,9
Lc
A1522-25/64IN 9,922 25/64“ 105 184 121 9,922
l2
l1 A1522-10 10 105 184 121 10
A1522-10.2 10,2 105 184 121 10,2
A1522-13/32IN 10,319 13/32“ 105 184 121 10,319
A1522-10.5 10,5 105 184 121 10,5
A1522-27/64IN 10,716 27/64“ 110 195 128 10,716
A1522-10.8 10,8 110 195 128 10,8
A1522-11 11 110 195 128 11
A1522-7/16IN 11,113 7/16“ 110 195 128 11,113
A1522-11.2 11,2 110 195 128 11,2
A1522-11.5 11,5 110 195 128 11,5
A1522-29/64IN 11,509 29/64“ 110 195 128 11,509
A1522-11.8 11,8 110 195 128 11,8
A1522-15/32IN 11,906 15/32“ 120 205 134 11,906
A1522-12 12 120 205 134 12
A1522-31/64IN 12,303 31/64“ 120 205 134 12,303
A1522-1/2IN 12,7 1/2“ 120 205 134 12,7
A1522-9/16IN 14,288 9/16“ 129 220 144 14,288
A1522-37/64IN 14,684 37/64“ 129 220 144 14,684
A1522-39/64IN 15,478 39/64“ 133 227 149 15,478
A1522-5/8IN 15,875 5/8“ 133 227 149 15,875
A1522-21/32IN 16,669 21/32“ 137 235 154 16,669
A1522-11/16IN 17,463 11/16“ 140 241 158 17,463
A1522-3/4IN 19,05 3/4“ 146 254 166 19,05
A1522-25/32IN 19,844 25/32“ 146 254 166 19,844
A1522-13/16IN 20,638 13/16“ 149 261 171 20,638
A1522-7/8IN 22,225 7/8“ 153 268 176 22,225
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
HSS twist drills, long
A1511
– Type N DIN
~12×Dc 340
118°
P M K N S H O
Uncoated C C C C C C
Dc d1
Parallel shank A1511-0.5 0,5 11,2 32 12 0,5
A1511-0.6 0,6 14,1 35 15 0,6
Dc d1 A1511-0.7 0,7 19,8 42 21 0,7
A1511-0.8 0,8 23,7 46 25 0,8
Lc A1511-0.9 0,9 27,5 51 29 0,9
l2
l1 A1511-1 1 31 56 33 1
A1511-1.1 1,1 35 60 37 1,1
A1511-1.2 1,2 39 65 41 1,2
A1511-1.3 1,3 39 65 41 1,3
A1511-1.4 1,4 42 70 45 1,4
A1511-1.5 1,5 42 70 45 1,5
A1511-1.6 1,6 47 76 50 1,6
A1511-1.65 1,65 47 76 50 1,65
A1511-1.7 1,7 47 76 50 1,7
A1511-1.75 1,75 50 80 53 1,75
A1511-1.8 1,8 50 80 53 1,8
A1511-1.9 1,9 50 80 53 1,9
A1511-2 2 52 85 56 2
A1511-2.05 2,05 52 85 56 2,05
A1511-2.1 2,1 52 85 56 2,1
A1511-2.2 2,2 55 90 59 2,2
A1511-2.25 2,25 55 90 59 2,25
A1511-2.3 2,3 55 90 59 2,3
A1511-2.4 2,4 58 95 62 2,4
A1511-2.5 2,5 58 95 62 2,5
A1511-2.6 2,6 58 95 62 2,6
A1511-2.7 2,7 61 100 66 2,7
A1511-2.8 2,8 61 100 66 2,8
A1511-2.9 2,9 61 100 66 2,9
A1511-3 3 61 100 66 3
A1511-3.1 3,1 63 106 69 3,1
A1511-3.15 3,15 63 106 69 3,15
A1511-3.2 3,2 63 106 69 3,2
A1511-3.3 3,3 63 106 69 3,3
A1511-3.4 3,4 67 112 73 3,4
A1511-3.5 3,5 67 112 73 3,5
A1511-3.6 3,6 67 112 73 3,6
A1511-3.7 3,7 67 112 73 3,7
A1511-3.8 3,8 71 119 78 3,8
A1511-3.9 3,9 71 119 78 3,9
A1511-4 4 71 119 78 4
A1511-4.1 4,1 71 119 78 4,1
A1511-4.2 4,2 71 119 78 4,2
A1511-4.25 4,25 71 119 78 4,25
A1511-4.3 4,3 74 126 82 4,3
A1511-4.4 4,4 74 126 82 4,4
A1511-4.5 4,5 74 126 82 4,5
A1511-4.6 4,6 74 126 82 4,6
Continued
D1 B 478 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1511-4.7 4,7 74 126 82 4,7
A1511-4.75 4,75 74 126 82 4,75
Dc d1 A1511-4.8 4,8 79 132 87 4,8
A1511-4.9 4,9 79 132 87 4,9
Lc A1511-5 5 79 132 87 5
l2
l1 A1511-5.1 5,1 79 132 87 5,1
A1511-5.2 5,2 79 132 87 5,2
A1511-5.25 5,25 79 132 87 5,25
A1511-5.3 5,3 79 132 87 5,3
A1511-5.4 5,4 82 139 91 5,4
A1511-5.5 5,5 82 139 91 5,5
A1511-5.6 5,6 82 139 91 5,6
A1511-5.7 5,7 82 139 91 5,7
A1511-5.75 5,75 82 139 91 5,75
A1511-5.8 5,8 82 139 91 5,8
A1511-5.9 5,9 82 139 91 5,9
A1511-6 6 82 139 91 6
A1511-6.1 6,1 86 148 97 6,1
A1511-6.2 6,2 86 148 97 6,2
A1511-6.25 6,25 86 148 97 6,25
A1511-6.3 6,3 86 148 97 6,3
A1511-6.4 6,4 86 148 97 6,4
A1511-6.5 6,5 86 148 97 6,5
A1511-6.6 6,6 86 148 97 6,6
A1511-6.7 6,7 86 148 97 6,7
A1511-6.75 6,75 90 156 102 6,75
A1511-6.8 6,8 90 156 102 6,8
A1511-6.9 6,9 90 156 102 6,9
A1511-7 7 90 156 102 7
A1511-7.1 7,1 90 156 102 7,1
A1511-7.2 7,2 90 156 102 7,2
A1511-7.25 7,25 90 156 102 7,25
A1511-7.3 7,3 90 156 102 7,3
A1511-7.4 7,4 90 156 102 7,4
A1511-7.5 7,5 90 156 102 7,5
A1511-7.6 7,6 96 165 109 7,6
A1511-7.7 7,7 96 165 109 7,7
A1511-7.75 7,75 96 165 109 7,75
A1511-7.8 7,8 96 165 109 7,8
A1511-7.9 7,9 96 165 109 7,9
A1511-8 8 96 165 109 8
A1511-8.1 8,1 96 165 109 8,1
A1511-8.2 8,2 96 165 109 8,2
A1511-8.25 8,25 96 165 109 8,25
A1511-8.3 8,3 96 165 109 8,3
A1511-8.4 8,4 96 165 109 8,4
A1511-8.5 8,5 96 165 109 8,5
A1511-8.6 8,6 100 175 115 8,6
A1511-8.7 8,7 100 175 115 8,7
A1511-8.75 8,75 100 175 115 8,75
A1511-8.8 8,8 100 175 115 8,8
A1511-8.9 8,9 100 175 115 8,9
A1511-9 9 100 175 115 9
A1511-9.1 9,1 100 175 115 9,1
A1511-9.2 9,2 100 175 115 9,2
A1511-9.25 9,25 100 175 115 9,25
A1511-9.3 9,3 100 175 115 9,3
A1511-9.4 9,4 100 175 115 9,4
Continued
plication
Primary ap
ation
Other applic
D1 B 478 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1511-9.5 9,5 100 175 115 9,5
A1511-9.6 9,6 105 184 121 9,6
Dc d1 A1511-9.7 9,7 105 184 121 9,7
A1511-9.75 9,75 105 184 121 9,75
Lc A1511-9.8 9,8 105 184 121 9,8
l2
l1 A1511-9.9 9,9 105 184 121 9,9
A1511-10 10 105 184 121 10
A1511-10.1 10,1 105 184 121 10,1
A1511-10.2 10,2 105 184 121 10,2
A1511-10.3 10,3 105 184 121 10,3
A1511-10.4 10,4 105 184 121 10,4
A1511-10.5 10,5 105 184 121 10,5
A1511-10.7 10,7 110 195 128 10,7
A1511-10.8 10,8 110 195 128 10,8
A1511-11 11 110 195 128 11
A1511-11.5 11,5 110 195 128 11,5
A1511-11.8 11,8 110 195 128 11,8
A1511-12 12 120 205 134 12
A1511-12.5 12,5 120 205 134 12,5
A1511-13 13 120 205 134 13
A1511-13.5 13,5 126 214 140 13,5
A1511-14 14 126 214 140 14
A1511-14.5 14,5 129 220 144 14,5
A1511-15 15 129 220 144 15
A1511-15.5 15,5 133 227 149 15,5
A1511-16 16 133 227 149 16
A1511-17 17 137 235 154 17
A1511-18 18 140 241 158 18
A1511-19 19 143 247 162 19
A1511-20 20 146 254 166 20
A1511-21 21 149 261 171 21
A1511-22 22 153 268 176 22
D1 B 478 B 482

Solid drilling
B1
HSS deep-hole drills, extra long
A1622
UFL®
DIN
~16×Dc 1869-I
130°
P M K N S H O
Dc d1
Parallel shank A1622-2 2 81 125 85 2
A1622-2.1 2,1 81 125 85 2,1
Dc d1 A1622-2.2 2,2 86 135 90 2,2
A1622-2.3 2,3 86 135 90 2,3
Lc
A1622-3/32IN 2,381 3/32“ 91 140 95 2,381
l2
l1 A1622-2.4 2,4 91 140 95 2,4
A1622-NO40 2,489 No. 40 91 140 95 2,489
A1622-2.5 2,5 91 140 95 2,5
A1622-NO39 2,527 No. 39 91 140 95 2,527
A1622-NO38 2,578 No. 38 91 140 95 2,578
A1622-2.6 2,6 91 140 95 2,6
A1622-NO37 2,642 No. 37 91 140 95 2,642
A1622-2.7 2,7 95 150 100 2,7
A1622-NO36 2,705 No. 36 95 150 100 2,705
A1622-7/64IN 2,778 7/64“ 95 150 100 2,778
A1622-NO35 2,794 No. 35 95 150 100 2,794
A1622-2.8 2,8 95 150 100 2,8
A1622-NO34 2,819 No. 34 95 150 100 2,819
A1622-NO33 2,87 No. 33 95 150 100 2,87
A1622-2.9 2,9 95 150 100 2,9
A1622-NO32 2,946 No. 32 95 150 100 2,946
A1622-3 3 95 150 100 3
A1622-NO31 3,048 No. 31 99 155 105 3,048
A1622-3.1 3,1 99 155 105 3,1
A1622-1/8IN 3,175 1/8“ 99 155 105 3,175
A1622-3.2 3,2 99 155 105 3,2
A1622-NO30 3,264 No. 30 99 155 105 3,264
A1622-3.3 3,3 99 155 105 3,3
A1622-3.4 3,4 109 165 115 3,4
A1622-NO29 3,454 No. 29 109 165 115 3,454
A1622-3.5 3,5 109 165 115 3,5
A1622-NO28 3,569 No. 28 109 165 115 3,569
A1622-9/64IN 3,572 9/64“ 109 165 115 3,572
A1622-3.6 3,6 109 165 115 3,6
A1622-NO27 3,658 No. 27 109 165 115 3,658
A1622-3.7 3,7 109 165 115 3,7
A1622-NO26 3,734 No. 26 109 165 115 3,734
A1622-NO25 3,797 No. 25 113 175 120 3,797
A1622-3.8 3,8 113 175 120 3,8
A1622-NO24 3,861 No. 24 113 175 120 3,861
A1622-3.9 3,9 113 175 120 3,9
A1622-NO23 3,912 No. 23 113 175 120 3,912
A1622-5/32IN 3,969 5/32“ 113 175 120 3,969
A1622-NO22 3,988 No. 22 113 175 120 3,988
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1622-4 4 113 175 120 4
A1622-NO21 4,039 No. 21 113 175 120 4,039
Dc d1 A1622-NO20 4,089 No. 20 113 175 120 4,089
A1622-4.1 4,1 113 175 120 4,1
Lc
A1622-4.2 4,2 113 175 120 4,2
l2
l1 A1622-NO19 4,216 No. 19 113 175 120 4,216
A1622-4.3 4,3 117 185 125 4,3
A1622-NO18 4,305 No. 18 117 185 125 4,305
A1622-11/64IN 4,366 11/64“ 117 185 125 4,366
A1622-NO17 4,394 No. 17 117 185 125 4,394
A1622-4.4 4,4 117 185 125 4,4
A1622-NO16 4,496 No. 16 117 185 125 4,496
A1622-4.5 4,5 117 185 125 4,5
A1622-NO15 4,572 No. 15 117 185 125 4,572
A1622-4.6 4,6 117 185 125 4,6
A1622-NO14 4,623 No. 14 117 185 125 4,623
A1622-NO13 4,699 No. 13 117 185 125 4,699
A1622-4.7 4,7 117 185 125 4,7
A1622-3/16IN 4,763 3/16“ 127 195 135 4,763
A1622-4.8 4,8 127 195 135 4,8
A1622-NO12 4,801 No. 12 127 195 135 4,801
A1622-NO11 4,851 No. 11 127 195 135 4,851
A1622-4.9 4,9 127 195 135 4,9
A1622-NO10 4,915 No. 10 127 195 135 4,915
A1622-NO9 4,978 No. 09 127 195 135 4,978
A1622-5 5 127 195 135 5
A1622-NO8 5,055 No. 08 127 195 135 5,055
A1622-5.1 5,1 127 195 135 5,1
A1622-NO7 5,105 No. 07 127 195 135 5,105
A1622-13/64IN 5,159 13/64“ 127 195 135 5,159
A1622-NO6 5,182 No. 06 127 195 135 5,182
A1622-5.2 5,2 127 195 135 5,2
A1622-NO5 5,22 No. 05 127 195 135 5,22
A1622-5.3 5,3 127 195 135 5,3
A1622-NO4 5,309 No. 04 131 205 140 5,309
A1622-5.4 5,4 131 205 140 5,4
A1622-NO3 5,41 No. 03 131 205 140 5,41
A1622-5.5 5,5 131 205 140 5,5
A1622-7/32IN 5,556 7/32“ 131 205 140 5,556
A1622-5.6 5,6 131 205 140 5,6
A1622-NO2 5,613 No. 02 131 205 140 5,613
A1622-5.7 5,7 131 205 140 5,7
A1622-NO1 5,791 No. 01 131 205 140 5,791
A1622-5.8 5,8 131 205 140 5,8
A1622-5.9 5,9 131 205 140 5,9
A1622-15/64IN 5,953 15/64“ 131 205 140 5,953
A1622-6 6 131 205 140 6
A1622-6.1 6,1 139 215 150 6,1
A1622-6.2 6,2 139 215 150 6,2
A1622-6.3 6,3 139 215 150 6,3
A1622-1/4IN 6,35 1/4“ 139 215 150 6,35
A1622-6.4 6,4 139 215 150 6,4
A1622-6.5 6,5 139 215 150 6,5
A1622-6.6 6,6 139 215 150 6,6
A1622-6.7 6,7 139 215 150 6,7
A1622-17/64IN 6,747 17/64“ 143 225 155 6,747
A1622-6.8 6,8 143 225 155 6,8
A1622-6.9 6,9 143 225 155 6,9
A1622-7 7 143 225 155 7
A1622-7.1 7,1 143 225 155 7,1
A1622-9/32IN 7,144 9/32“ 143 225 155 7,144
A1622-7.2 7,2 143 225 155 7,2
Continued
XIII D1 B 478 B 482

Solid drilling
B1
Continued
Dc d1
Parallel shank A1622-7.3 7,3 143 225 155 7,3
A1622-7.4 7,4 143 225 155 7,4
Dc d1 A1622-7.5 7,5 143 225 155 7,5
A1622-19/64IN 7,541 19/64“ 152 240 165 7,541
Lc
A1622-7.6 7,6 152 240 165 7,6
l2
l1 A1622-7.7 7,7 152 240 165 7,7
A1622-7.8 7,8 152 240 165 7,8
A1622-7.9 7,9 152 240 165 7,9
A1622-5/16IN 7,938 5/16“ 152 240 165 7,938
A1622-8 8 152 240 165 8
A1622-8.1 8,1 152 240 165 8,1
A1622-8.2 8,2 152 240 165 8,2
A1622-8.3 8,3 152 240 165 8,3
A1622-21/64IN 8,334 21/64“ 152 240 165 8,334
A1622-8.4 8,4 152 240 165 8,4
A1622-8.5 8,5 152 240 165 8,5
A1622-8.6 8,6 160 250 175 8,6
A1622-8.7 8,7 160 250 175 8,7
A1622-11/32IN 8,731 11/32“ 160 250 175 8,731
A1622-8.8 8,8 160 250 175 8,8
A1622-8.9 8,9 160 250 175 8,9
A1622-9 9 160 250 175 9
A1622-9.1 9,1 160 250 175 9,1
A1622-23/64IN 9,128 23/64“ 160 250 175 9,128
A1622-9.2 9,2 160 250 175 9,2
A1622-9.3 9,3 160 250 175 9,3
A1622-9.4 9,4 160 250 175 9,4
A1622-9.5 9,5 160 250 175 9,5
A1622-3/8IN 9,525 3/8“ 169 265 185 9,525
A1622-9.6 9,6 169 265 185 9,6
A1622-9.7 9,7 169 265 185 9,7
A1622-9.8 9,8 169 265 185 9,8
A1622-9.9 9,9 169 265 185 9,9
A1622-25/64IN 9,922 25/64“ 169 265 185 9,922
A1622-10 10 169 265 185 10
A1622-13/32IN 10,319 13/32“ 169 265 185 10,319
A1622-10.5 10,5 169 265 185 10,5
A1622-27/64IN 10,716 27/64“ 177 280 195 10,716
A1622-11 11 177 280 195 11
A1622-7/16IN 11,113 7/16“ 177 280 195 11,113
A1622-11.5 11,5 177 280 195 11,5
A1622-29/64IN 11,509 29/64“ 177 280 195 11,509
A1622-15/32IN 11,906 15/32“ 191 295 205 11,906
A1622-12 12 191 295 205 12
A1622-31/64IN 12,303 31/64“ 191 295 205 12,303
A1622-1/2IN 12,7 1/2“ 191 295 205 12,7
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
A1722
UFL®
DIN
~22×Dc 1869-II
130°
P M K N S H O
Dc d1
Parallel shank A1722-3 3 125 190 130 3
A1722-3.5 3,5 139 210 145 3,5
Dc d1 A1722-4 4 143 220 150 4
A1722-4.5 4,5 152 235 160 4,5
Lc
A1722-5 5 162 245 170 5
l2
l1 A1722-5.5 5,5 171 260 180 5,5
A1722-6 6 171 260 180 6
A1722-6.5 6,5 179 275 190 6,5
A1722-7 7 188 290 200 7
A1722-7.5 7,5 188 290 200 7,5
A1722-8 8 197 305 210 8
A1722-8.5 8,5 197 305 210 8,5
A1722-9 9 205 320 220 9
A1722-9.5 9,5 205 320 220 9,5
A1722-10 10 219 340 235 10
A1722-10.5 10,5 219 340 235 10,5
A1722-11 11 232 360 250 11
A1722-11.5 11,5 232 360 250 11,5
A1722-12 12 246 380 260 12
XIII D1 B 478 B 482

Solid drilling
B1
A1822
UFL®
DIN
~30×Dc 1869-III
130°
P M K N S H O
Dc d1
Parallel shank A1822-3.5 3,5 174 265 180 3,5
A1822-4 4 183 280 190 4
Dc d1 A1822-4.5 4,5 192 295 200 4,5
A1822-5 5 202 315 210 5
Lc
A1822-5.5 5,5 216 330 225 5,5
l2
l1 A1822-6 6 216 330 225 6
A1822-6.5 6,5 224 350 235 6,5
A1822-7 7 238 370 250 7
A1822-7.5 7,5 238 370 250 7,5
A1822-8 8 252 390 265 8
A1822-8.5 8,5 252 390 265 8,5
A1822-9 9 265 410 280 9
A1822-9.5 9,5 265 410 280 9,5
A1822-10 10 279 430 295 10
A1822-10.5 10,5 279 430 295 10,5
A1822-11 11 287 450 305 11
A1822-11.5 11,5 287 450 305 11,5
A1822-12 12 291 480 305 12
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
HSS deep-hole drills, ultra long
A1922S
UFL®
~60×Dc
130°
P M K N S H O
Dc d1
Parallel shank A1922S-6 6 389 500 400 6
A1922S-6.5 6,5 389 500 400 6,5
Dc d1 A1922S-7 7 389 500 400 7
A1922S-8 8 536 650 550 8
Lc
A1922S-9 9 536 650 550 9
l2
l1 A1922S-10 10 680 800 700 10
A1922S-11 11 680 800 700 11
A1922S-12 12 680 800 700 12
A1922S-13 13 680 800 700 13
A1922S-14 14 680 800 700 14
XIII D1 B 478 B 482

Solid drilling
B1
HSS deep-hole drills, ultra long
A1922L
UFL®
~85×Dc
130°
P M K N S H O
Dc d1
Parallel shank A1922L-8 8 685 800 700 8
A1922L-10 10 769 1000 800 10
Dc d1 A1922L-12 12 769 1000 800 12
Lc
l2
l1
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
HSS twist drills with Morse taper
A4211 / A4211TIN
DIN
~8×Dc 345
– Type N 118°
P M K N S H O
TIN CC CC CC C C C
Dc Dc
Designation Designation h8 inches/ Lc l1 l2
TIN Uncoated mm no. mm mm mm MT
Morse taper A4211-3 3 28 114 33 MK1 B
A4211-1/8IN 3,175 1/8“ 30 117 36 MK1 B
Dc A4211-3.25 3,25 30 117 36 MK1 B
A4211-3.5 3,5 33 120 39 MK1 B
Lc A4211-3.75 3,75 33 120 39 MK1 B
l2
l1 A4211-4 4 36 124 43 MK1 B
A4211-4.1 4,1 36 124 43 MK1 B
A4211-4.2 4,2 36 124 43 MK1 B
A4211-4.25 4,25 36 124 43 MK1 B
A4211-4.3 4,3 39 128 47 MK1 B
A4211-4.4 4,4 39 128 47 MK1 B
A4211-4.5 4,5 39 128 47 MK1 B
A4211-4.7 4,7 39 128 47 MK1 B
A4211-4.75 4,75 39 128 47 MK1 B
A4211-3/16IN 4,763 3/16“ 44 133 52 MK1 B
A4211-4.8 4,8 44 133 52 MK1 B
A4211-4.9 4,9 44 133 52 MK1 B
A4211-5 5 44 133 52 MK1 B
A4211-5.1 5,1 44 133 52 MK1 B
A4211-5.2 5,2 44 133 52 MK1 B
A4211-5.25 5,25 44 133 52 MK1 B
A4211-5.4 5,4 48 138 57 MK1 B
A4211-5.5 5,5 48 138 57 MK1 B
A4211-5.6 5,6 48 138 57 MK1 B
A4211-5.7 5,7 48 138 57 MK1 B
A4211-5.75 5,75 48 138 57 MK1 B
A4211-5.8 5,8 48 138 57 MK1 B
A4211-5.9 5,9 48 138 57 MK1 B
A4211-6 6 48 138 57 MK1 B
A4211-6.1 6,1 52 144 63 MK1 B
A4211-6.2 6,2 52 144 63 MK1 B
A4211-6.25 6,25 52 144 63 MK1 B
A4211-6.3 6,3 52 144 63 MK1 B
A4211-1/4IN 6,35 1/4“ 52 144 63 MK1 B
A4211-6.4 6,4 52 144 63 MK1 B
A4211-6.5 6,5 52 144 63 MK1 B
A4211-6.6 6,6 52 144 63 MK1 B
A4211-6.7 6,7 52 144 63 MK1 B
A4211-6.75 6,75 57 150 69 MK1 B
A4211-6.8 6,8 57 150 69 MK1 B
A4211-6.9 6,9 57 150 69 MK1 B
A4211-7 7 57 150 69 MK1 B
A4211-7.2 7,2 57 150 69 MK1 B
A4211-7.25 7,25 57 150 69 MK1 B
A4211-7.3 7,3 57 150 69 MK1 B
A4211-7.4 7,4 57 150 69 MK1 B
A4211-7.5 7,5 57 150 69 MK1 B
A4211-7.7 7,7 62 156 75 MK1 B
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211-7.75 7,75 62 156 75 MK1 B
A4211-7.8 7,8 62 156 75 MK1 B
Dc A4211-7.9 7,9 62 156 75 MK1 B
A4211-5/16IN 7,938 5/16“ 62 156 75 MK1 B
Lc A4211-8 8 62 156 75 MK1 B
l2
l1 A4211-8.1 8,1 62 156 75 MK1 B
A4211-8.2 8,2 62 156 75 MK1 B
A4211-8.25 8,25 62 156 75 MK1 B
A4211-8.3 8,3 62 156 75 MK1 B
A4211-8.4 8,4 62 156 75 MK1 B
A4211-8.5 8,5 62 156 75 MK1 B
A4211-8.6 8,6 66 162 81 MK1 B
A4211-8.7 8,7 66 162 81 MK1 B
A4211-8.75 8,75 66 162 81 MK1 B
A4211-8.8 8,8 66 162 81 MK1 B
A4211-8.9 8,9 66 162 81 MK1 B
A4211-9 9 66 162 81 MK1 B
A4211-9.1 9,1 66 162 81 MK1 B
A4211-23/64IN 9,128 23/64“ 66 162 81 MK1 B
A4211-9.2 9,2 66 162 81 MK1 B
A4211-9.25 9,25 66 162 81 MK1 B
A4211-9.3 9,3 66 162 81 MK1 B
A4211-9.4 9,4 66 162 81 MK1 B
A4211-9.5 9,5 66 162 81 MK1 B
A4211-3/8IN 9,525 3/8“ 71 168 87 MK1 B
A4211-9.6 9,6 71 168 87 MK1 B
A4211-9.7 9,7 71 168 87 MK1 B
A4211-9.75 9,75 71 168 87 MK1 B
A4211-9.8 9,8 71 168 87 MK1 B
A4211-9.9 9,9 71 168 87 MK1 B
A4211-25/64IN 9,922 25/64“ 71 168 87 MK1 B
A4211TIN-10 A4211-10 10 71 168 87 MK1 B
A4211-10.1 10,1 71 168 87 MK1 B
A4211TIN-10.2 A4211-10.2 10,2 71 168 87 MK1 B
A4211-10.25 10,25 71 168 87 MK1 B
A4211-10.3 10,3 71 168 87 MK1 B
A4211-10.4 10,4 71 168 87 MK1 B
A4211TIN-10.5 A4211-10.5 10,5 71 168 87 MK1 B
A4211-10.6 10,6 71 168 87 MK1 B
A4211-10.7 10,7 76 175 94 MK1 B
A4211-27/64IN 10,716 27/64“ 76 175 94 MK1 B
A4211-10.75 10,75 76 175 94 MK1 B
A4211-10.8 10,8 76 175 94 MK1 B
A4211-10.9 10,9 76 175 94 MK1 B
A4211TIN-11 A4211-11 11 76 175 94 MK1 B
A4211-11.1 11,1 76 175 94 MK1 B
A4211-7/16IN 11,113 7/16“ 76 175 94 MK1 B
A4211-11.2 11,2 76 175 94 MK1 B
A4211-11.25 11,25 76 175 94 MK1 B
A4211-11.3 11,3 76 175 94 MK1 B
A4211-11.4 11,4 76 175 94 MK1 B
A4211TIN-11.5 A4211-11.5 11,5 76 175 94 MK1 B
A4211-29/64IN 11,509 29/64“ 76 175 94 MK1 B
A4211-11.6 11,6 76 175 94 MK1 B
A4211-11.7 11,7 76 175 94 MK1 B
A4211-11.75 11,75 76 175 94 MK1 B
A4211-11.8 11,8 76 175 94 MK1 B
A4211-11.9 11,9 87 182 101 MK1 B
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211TIN-12 A4211-12 12 87 182 101 MK1 B
A4211-12.1 12,1 87 182 101 MK1 B
Dc A4211-12.2 12,2 87 182 101 MK1 B
A4211-12.25 12,25 87 182 101 MK1 B
Lc A4211-12.3 12,3 87 182 101 MK1 B
l2
l1 A4211-31/64IN 12,303 31/64“ 87 182 101 MK1 B
A4211-12.4 12,4 87 182 101 MK1 B
A4211TIN-12.5 A4211-12.5 12,5 87 182 101 MK1 B
A4211-12.6 12,6 87 182 101 MK1 B
A4211-1/2IN 12,7 1/2“ 87 182 101 MK1 B
A4211-12.75 12,75 87 182 101 MK1 B
A4211-12.8 12,8 87 182 101 MK1 B
A4211-12.9 12,9 87 182 101 MK1 B
A4211TIN-13 A4211-13 13 87 182 101 MK1 B
A4211-33/64IN 13,097 33/64“ 87 182 101 MK1 B
A4211-13.1 13,1 87 182 101 MK1 B
A4211-13.2 13,2 87 182 101 MK1 B
A4211-13.25 13,25 94 189 108 MK1 B
A4211-13.3 13,3 94 189 108 MK1 B
A4211-17/32IN 13,494 17/32“ 94 189 108 MK1 B
A4211TIN-13.5 A4211-13.5 13,5 94 189 108 MK1 B
A4211-13.6 13,6 94 189 108 MK1 B
A4211-13.7 13,7 94 189 108 MK1 B
A4211-13.75 13,75 94 189 108 MK1 B
A4211-13.8 13,8 94 189 108 MK1 B
A4211-35/64IN 13,891 35/64“ 94 189 108 MK1 B
A4211-13.9 13,9 94 189 108 MK1 B
A4211TIN-14 A4211-14 14 94 189 108 MK1 B
A4211-14.1 14,1 99 212 114 MK2 B
A4211-14.2 14,2 99 212 114 MK2 B
A4211-14.25 14,25 99 212 114 MK2 B
A4211-9/16IN 14,288 9/16“ 99 212 114 MK2 B
A4211-14.3 14,3 99 212 114 MK2 B
A4211-14.4 14,4 99 212 114 MK2 B
A4211TIN-14.5 A4211-14.5 14,5 99 212 114 MK2 B
A4211-14.6 14,6 99 212 114 MK2 B
A4211-37/64IN 14,684 37/64“ 99 212 114 MK2 B
A4211-14.7 14,7 99 212 114 MK2 B
A4211-14.75 14,75 99 212 114 MK2 B
A4211-14.8 14,8 99 212 114 MK2 B
A4211-14.9 14,9 99 212 114 MK2 B
A4211TIN-15 A4211-15 15 99 212 114 MK2 B
A4211-19/32IN 15,081 19/32“ 104 218 120 MK2 B
A4211-15.1 15,1 104 218 120 MK2 B
A4211-15.2 15,2 104 218 120 MK2 B
A4211-15.25 15,25 104 218 120 MK2 B
A4211-15.3 15,3 104 218 120 MK2 B
A4211-39/64IN 15,478 39/64“ 104 218 120 MK2 B
A4211TIN-15.5 A4211-15.5 15,5 104 218 120 MK2 B
A4211-15.7 15,7 104 218 120 MK2 B
A4211-15.75 15,75 104 218 120 MK2 B
A4211-15.8 15,8 104 218 120 MK2 B
A4211-5/8IN 15,875 5/8“ 104 218 120 MK2 B
A4211-15.9 15,9 104 218 120 MK2 B
A4211TIN-16 A4211-16 16 104 218 120 MK2 B
A4211-16.1 16,1 108 223 125 MK2 B
A4211-16.2 16,2 108 223 125 MK2 B
A4211-16.25 16,25 108 223 125 MK2 B
A4211-16.3 16,3 108 223 125 MK2 B
A4211-16.4 16,4 108 223 125 MK2 B
A4211TIN-16.5 A4211-16.5 16,5 108 223 125 MK2 B
A4211-16.6 16,6 108 223 125 MK2 B
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211-21/32IN 16,669 21/32“ 108 223 125 MK2 B
A4211-16.7 16,7 108 223 125 MK2 B
Dc A4211-16.75 16,75 108 223 125 MK2 B
A4211-16.8 16,8 108 223 125 MK2 B
Lc A4211-16.9 16,9 108 223 125 MK2 B
l2
l1 A4211TIN-17 A4211-17 17 108 223 125 MK2 B
A4211-17.1 17,1 112 228 130 MK2 B
A4211-17.2 17,2 112 228 130 MK2 B
A4211-17.25 17,25 112 228 130 MK2 B
A4211-17.3 17,3 112 228 130 MK2 B
A4211-17.4 17,4 112 228 130 MK2 B
A4211-11/16IN 17,463 11/16“ 112 228 130 MK2 B
A4211TIN-17.5 A4211-17.5 17,5 112 228 130 MK2 B
A4211-17.6 17,6 112 228 130 MK2 B
A4211-17.7 17,7 112 228 130 MK2 B
A4211-17.75 17,75 112 228 130 MK2 B
A4211-17.8 17,8 112 228 130 MK2 B
A4211-45/64IN 17,859 45/64“ 112 228 130 MK2 B
A4211-17.9 17,9 112 228 130 MK2 B
A4211TIN-18 A4211-18 18 112 228 130 MK2 B
A4211-18.1 18,1 116 233 135 MK2 B
A4211-18.2 18,2 116 233 135 MK2 B
A4211-18.25 18,25 116 233 135 MK2 B
A4211-23/32IN 18,256 23/32“ 116 233 135 MK2 B
A4211-18.3 18,3 116 233 135 MK2 B
A4211-18.4 18,4 116 233 135 MK2 B
A4211TIN-18.5 A4211-18.5 18,5 116 233 135 MK2 B
A4211-18.6 18,6 116 233 135 MK2 B
A4211-47/64IN 18,653 47/64“ 116 233 135 MK2 B
A4211-18.7 18,7 116 233 135 MK2 B
A4211-18.75 18,75 116 233 135 MK2 B
A4211-18.8 18,8 116 233 135 MK2 B
A4211-18.9 18,9 116 233 135 MK2 B
A4211TIN-19 A4211-19 19 116 233 135 MK2 B
A4211-3/4IN 19,05 3/4“ 120 238 140 MK2 B
A4211-19.1 19,1 120 238 140 MK2 B
A4211-19.2 19,2 120 238 140 MK2 B
A4211-19.25 19,25 120 238 140 MK2 B
A4211-19.3 19,3 120 238 140 MK2 B
A4211-19.4 19,4 120 238 140 MK2 B
A4211-49/64IN 19,447 49/64“ 120 238 140 MK2 B
A4211TIN-19.5 A4211-19.5 19,5 120 238 140 MK2 B
A4211-19.7 19,7 120 238 140 MK2 B
A4211-19.75 19,75 120 238 140 MK2 B
A4211-19.8 19,8 120 238 140 MK2 B
A4211-25/32IN 19,844 25/32“ 120 238 140 MK2 B
A4211-19.9 19,9 120 238 140 MK2 B
A4211TIN-20 A4211-20 20 120 238 140 MK2 B
A4211-20.1 20,1 123 243 145 MK2 B
A4211-20.2 20,2 123 243 145 MK2 B
A4211-20.25 20,25 123 243 145 MK2 B
A4211-20.3 20,3 123 243 145 MK2 B
A4211-20.4 20,4 123 243 145 MK2 B
A4211TIN-20.5 A4211-20.5 20,5 123 243 145 MK2 B
A4211-20.6 20,6 123 243 145 MK2 B
A4211-13/16IN 20,638 13/16“ 123 243 145 MK2 B
A4211-20.7 20,7 123 243 145 MK2 B
A4211-20.75 20,75 123 243 145 MK2 B
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211-20.8 20,8 123 243 145 MK2 B
A4211-20.9 20,9 123 243 145 MK2 B
Dc A4211TIN-21 A4211-21 21 123 243 145 MK2 B
A4211-21.1 21,1 123 243 145 MK2 B
Lc A4211-21.2 21,2 123 243 145 MK2 B
l2
l1 A4211-21.25 21,25 127 248 150 MK2 B
A4211-27/32IN 21,431 27/32“ 127 248 150 MK2 B
A4211TIN-21.5 A4211-21.5 21,5 127 248 150 MK2 B
A4211-21.6 21,6 127 248 150 MK2 B
A4211-21.7 21,7 127 248 150 MK2 B
A4211-21.75 21,75 127 248 150 MK2 B
A4211-21.8 21,8 127 248 150 MK2 B
A4211-55/64IN 21,828 55/64“ 127 248 150 MK2 B
A4211TIN-22 A4211-22 22 127 248 150 MK2 B
A4211-22.1 22,1 127 248 150 MK2 B
A4211-22.2 22,2 127 248 150 MK2 B
A4211-7/8IN 22,225 7/8“ 127 248 150 MK2 B
A4211-22.25 22,25 127 248 150 MK2 B
A4211-22.3 22,3 127 248 150 MK2 B
A4211TIN-22.5 A4211-22.5 22,5 131 253 155 MK2 B
A4211-57/64IN 22,622 57/64“ 131 253 155 MK2 B
A4211-22.7 22,7 131 253 155 MK2 B
A4211-22.75 22,75 131 253 155 MK2 B
A4211TIN-23 A4211-23 23 131 253 155 MK2 B
A4211-29/32IN 23,019 29/32“ 131 253 155 MK2 B
A4211-23.25 23,25 131 276 155 MK3 B
A4211-59/64IN 23,416 59/64“ 131 276 155 MK3 B
A4211-23.5 23,5 131 276 155 MK3 B
A4211-23.75 23,75 135 281 160 MK3 B
A4211-15/16IN 23,813 15/16“ 135 281 160 MK3 B
A4211TIN-24 A4211-24 24 135 281 160 MK3 B
A4211-24.25 24,25 135 281 160 MK3 B
A4211-24.5 24,5 135 281 160 MK3 B
A4211-31/32IN 24,606 31/32“ 135 281 160 MK3 B
A4211-24.75 24,75 135 281 160 MK3 B
A4211TIN-25 A4211-25 25 135 281 160 MK3 B
A4211-25.25 25,25 138 286 165 MK3 B
A4211-1IN 25,4 1“ 138 286 165 MK3 B
A4211-25.5 25,5 138 286 165 MK3 B
A4211-25.75 25,75 138 286 165 MK3 B
A4211TIN-26 A4211-26 26 138 286 165 MK3 B
A4211-1.1/32IN 26,194 1 1/32“ 138 286 165 MK3 B
A4211-26.25 26,25 138 286 165 MK3 B
A4211-26.5 26,5 138 286 165 MK3 B
A4211-26.75 26,75 142 291 170 MK3 B
A4211-1.1/16IN 26,988 1 1/16“ 142 291 170 MK3 B
A4211TIN-27 A4211-27 27 142 291 170 MK3 B
A4211-27.25 27,25 142 291 170 MK3 B
A4211-27.5 27,5 142 291 170 MK3 B
A4211-27.75 27,75 142 291 170 MK3 B
A4211TIN-28 A4211-28 28 142 291 170 MK3 B
A4211-1.7/64IN 28,178 1 7/64“ 145 296 175 MK3 B
A4211-28.25 28,25 145 296 175 MK3 B
A4211-28.5 28,5 145 296 175 MK3 B
A4211-1.1/8IN 28,575 1 1/8“ 145 296 175 MK3 B
A4211-28.75 28,75 145 296 175 MK3 B
A4211TIN-29 A4211-29 29 145 296 175 MK3 B
A4211-29.25 29,25 145 296 175 MK3 B
A4211-29.5 29,5 145 296 175 MK3 B
A4211-29.75 29,75 145 296 175 MK3 B
A4211TIN-30 A4211-30 30 145 296 175 MK3 B
A4211-1.3/16IN 30,163 1 3/16“ 148 301 180 MK3 B
Continued
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211-30.25 30,25 148 301 180 MK3 B
A4211-30.5 30,5 148 301 180 MK3 B
Dc A4211-30.75 30,75 148 301 180 MK3 B
A4211-31 31 148 301 180 MK3 B
Lc A4211-31.25 31,25 148 301 180 MK3 B
l2
l1 A4211-31.5 31,5 148 301 180 MK3 B
A4211-1.1/4IN 31,75 1 1/4“ 153 306 185 MK3 B
A4211-32 32 151 334 185 MK4 B
A4211-32.5 32,5 151 334 185 MK4 B
A4211-33 33 151 334 185 MK4 B
A4211-1.5/16IN 33,338 1 5/16“ 151 334 185 MK4 B
A4211-33.5 33,5 151 334 185 MK4 B
A4211-34 34 154 339 190 MK4 B
A4211-1.11/32IN 34,131 1 11/32“ 154 339 190 MK4 B
A4211-34.5 34,5 154 339 190 MK4 B
A4211-1.3/8IN 34,925 1 3/8“ 154 339 190 MK4 B
A4211-35 35 154 339 190 MK4 B
A4211-35.5 35,5 154 339 190 MK4 B
A4211-1.13/32IN 35,719 1 13/32“ 157 344 195 MK4 B
A4211-36 36 157 344 195 MK4 B
A4211-36.5 36,5 157 344 195 MK4 B
A4211-1.7/16IN 36,513 1 7/16“ 157 344 195 MK4 B
A4211-37 37 157 344 195 MK4 B
A4211-37.5 37,5 157 344 195 MK4 B
A4211-38 38 160 349 200 MK4 B
A4211-1.1/2IN 38,1 1 1/2“ 160 349 200 MK4 B
A4211-38.5 38,5 160 349 200 MK4 B
A4211-39 39 160 349 200 MK4 B
A4211-39.5 39,5 160 349 200 MK4 B
A4211-1.9/16IN 39,688 1 9/16“ 160 349 200 MK4 B
A4211-40 40 160 349 200 MK4 B
A4211-40.5 40,5 162 354 205 MK4 B
A4211-41 41 162 354 205 MK4 B
A4211-1.5/8IN 41,275 1 5/8“ 162 354 205 MK4 B
A4211-41.5 41,5 162 354 205 MK4 B
A4211-42 42 162 354 205 MK4 B
A4211-42.5 42,5 162 354 205 MK4 B
A4211-43 43 165 359 210 MK4 B
A4211-43.5 43,5 165 359 210 MK4 B
A4211-44 44 165 359 210 MK4 B
A4211-44.5 44,5 165 359 210 MK4 B
A4211-45 45 165 359 210 MK4 B
A4211-45.5 45,5 167 364 215 MK4 B
A4211-46 46 167 364 215 MK4 B
A4211-46.5 46,5 167 364 215 MK4 B
A4211-47 47 167 364 215 MK4 B
A4211-47.5 47,5 167 364 215 MK4 B
A4211-48 48 170 369 220 MK4 B
A4211-48.5 48,5 170 369 220 MK4 B
A4211-49 49 170 369 220 MK4 B
A4211-49.5 49,5 170 369 220 MK4 B
A4211-50 50 170 369 220 MK4 B
A4211-50.5 50,5 174 374 225 MK4 B
A4211-2IN 50,8 2“ 174 374 225 MK4 B
A4211-51 51 172 412 225 MK5 B
A4211-52 52 172 412 225 MK5 B
A4211-53 53 172 412 225 MK5 B
A4211-54 54 174 417 230 MK5 B
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc Dc
Morse taper A4211-55 55 174 417 230 MK5 B
A4211-56 56 174 417 230 MK5 B
Dc A4211-57 57 175 422 235 MK5 B
A4211-58 58 175 422 235 MK5 B
Lc A4211-59 59 175 422 235 MK5 B
l2
l1 A4211-60 60 175 422 235 MK5 B
A4211-61 61 177 427 240 MK5 B
A4211-62 62 177 427 240 MK5 B
A4211-63 63 177 427 240 MK5 B
A4211-64 64 178 432 245 MK5 B
A4211-65 65 178 432 245 MK5 B
A4211-66 66 178 432 245 MK5 B
A4211-67 67 178 432 245 MK5 B
A4211-68 68 179 437 250 MK5 B
A4211-69 69 179 437 250 MK5 B
A4211-70 70 179 437 250 MK5 B
A4211-71 71 179 437 250 MK5 B
A4211-72 72 180 442 255 MK5 B
A4211-73 73 180 442 255 MK5 B
A4211-74 74 180 442 255 MK5 B
A4211-75 75 180 442 255 MK5 B
A4211-76 76 183 447 260 MK5 B
A4211-77 77 180 514 260 MK6 B
A4211-78 78 180 514 260 MK6 B
A4211-79 79 180 514 260 MK6 B
A4211-80 80 180 514 260 MK6 B
A4211-81 81 180 519 265 MK6 B
A4211-82 82 180 519 265 MK6 B
A4211-84 84 180 519 265 MK6 B
A4211-85 85 180 519 265 MK6 B
A4211-90 90 180 524 270 MK6 B
A4211-95 95 180 529 275 MK6 B
A4211-100 100 180 534 280 MK6 B
D1 B 476 B 482

Solid drilling
B1
HSS-E twist drills with Morse taper
A4244
VA
DIN
~8×Dc 345
130°
P M K N S H O
Uncoated C CC C CC
Dc
Designation h8 Lc l1 l2
Uncoated mm mm mm mm MT
Morse taper A4244-10 10 71 168 87 MK1 B
A4244-10.2 10,2 71 168 87 MK1 B
Dc A4244-10.5 10,5 71 168 87 MK1 B
A4244-10.8 10,8 76 175 94 MK1 B
Lc A4244-11 11 76 175 94 MK1 B
l2
l1 A4244-11.2 11,2 76 175 94 MK1 B
A4244-11.5 11,5 76 175 94 MK1 B
A4244-11.8 11,8 76 175 94 MK1 B
A4244-12 12 87 182 101 MK1 B
A4244-12.2 12,2 87 182 101 MK1 B
A4244-12.5 12,5 87 182 101 MK1 B
A4244-12.8 12,8 87 182 101 MK1 B
A4244-13 13 87 182 101 MK1 B
A4244-13.2 13,2 87 182 101 MK1 B
A4244-13.5 13,5 94 189 108 MK1 B
A4244-13.8 13,8 94 189 108 MK1 B
A4244-14 14 94 189 108 MK1 B
A4244-14.25 14,25 99 212 114 MK2 B
A4244-14.5 14,5 99 212 114 MK2 B
A4244-14.75 14,75 99 212 114 MK2 B
A4244-15 15 99 212 114 MK2 B
A4244-15.25 15,25 104 218 120 MK2 B
A4244-15.5 15,5 104 218 120 MK2 B
A4244-15.75 15,75 104 218 120 MK2 B
A4244-16 16 104 218 120 MK2 B
A4244-16.25 16,25 108 223 125 MK2 B
A4244-16.5 16,5 108 223 125 MK2 B
A4244-16.75 16,75 108 223 125 MK2 B
A4244-17 17 108 223 125 MK2 B
A4244-17.25 17,25 112 228 130 MK2 B
A4244-17.5 17,5 112 228 130 MK2 B
A4244-17.75 17,75 112 228 130 MK2 B
A4244-18 18 112 228 130 MK2 B
A4244-18.25 18,25 116 233 135 MK2 B
A4244-18.5 18,5 116 233 135 MK2 B
A4244-18.75 18,75 116 233 135 MK2 B
A4244-19 19 116 233 135 MK2 B
A4244-19.25 19,25 120 238 140 MK2 B
A4244-19.5 19,5 120 238 140 MK2 B
A4244-19.75 19,75 120 238 140 MK2 B
A4244-20 20 120 238 140 MK2 B
A4244-20.25 20,25 123 243 145 MK2 B
A4244-20.5 20,5 123 243 145 MK2 B
A4244-20.75 20,75 123 243 145 MK2 B
Continued
plication
Primary ap
ation
Other applic
D1 B 476 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4244-21 21 123 243 145 MK2 B
A4244-21.25 21,25 127 248 150 MK2 B
Dc A4244-21.5 21,5 127 248 150 MK2 B
A4244-21.75 21,75 127 248 150 MK2 B
Lc A4244-22 22 127 248 150 MK2 B
l2
l1 A4244-22.25 22,25 127 248 150 MK2 B
A4244-22.5 22,5 131 253 155 MK2 B
A4244-22.75 22,75 131 253 155 MK2 B
A4244-23 23 131 253 155 MK2 B
A4244-23.5 23,5 131 276 155 MK3 B
A4244-24 24 135 281 160 MK3 B
A4244-24.5 24,5 135 281 160 MK3 B
A4244-25 25 135 281 160 MK3 B
A4244-25.5 25,5 138 286 165 MK3 B
A4244-26 26 138 286 165 MK3 B
A4244-26.5 26,5 138 286 165 MK3 B
A4244-27 27 142 291 170 MK3 B
A4244-27.5 27,5 142 291 170 MK3 B
A4244-28 28 142 291 170 MK3 B
A4244-28.5 28,5 145 296 175 MK3 B
A4244-29 29 145 296 175 MK3 B
A4244-29.5 29,5 145 296 175 MK3 B
A4244-30 30 145 296 175 MK3 B
A4244-30.5 30,5 148 301 180 MK3 B
A4244-31 31 148 301 180 MK3 B
A4244-31.5 31,5 148 301 180 MK3 B
A4244-32 32 151 334 185 MK4 B
D1 B 476 B 482

Solid drilling
B1
HSS-E twist drills with Morse taper
A4247
Alpha® XE
– Uncoated from 23.02 mm DIN

~8×Dc 345
130°
P M K N S H O
Dc
Morse taper A4247-10 10 71 168 87 MK1 B
A4247-10.2 10,2 71 168 87 MK1 B
Dc A4247-10.5 10,5 71 168 87 MK1 B
A4247-10.8 10,8 76 175 94 MK1 B
Lc A4247-11 11 76 175 94 MK1 B
l2
l1 A4247-11.2 11,2 76 175 94 MK1 B
A4247-11.5 11,5 76 175 94 MK1 B
A4247-11.8 11,8 76 175 94 MK1 B
A4247-12 12 87 182 101 MK1 B
A4247-12.2 12,2 87 182 101 MK1 B
A4247-12.5 12,5 87 182 101 MK1 B
A4247-12.8 12,8 87 182 101 MK1 B
A4247-13 13 87 182 101 MK1 B
A4247-13.2 13,2 87 182 101 MK1 B
A4247-13.5 13,5 94 189 108 MK1 B
A4247-13.8 13,8 94 189 108 MK1 B
A4247-14 14 94 189 108 MK1 B
A4247-14.25 14,25 99 212 114 MK2 B
A4247-14.5 14,5 99 212 114 MK2 B
A4247-14.75 14,75 99 212 114 MK2 B
A4247-15 15 99 212 114 MK2 B
A4247-15.25 15,25 104 218 120 MK2 B
A4247-15.5 15,5 104 218 120 MK2 B
A4247-15.75 15,75 104 218 120 MK2 B
A4247-16 16 104 218 120 MK2 B
A4247-16.25 16,25 108 223 125 MK2 B
A4247-16.5 16,5 108 223 125 MK2 B
A4247-16.75 16,75 108 223 125 MK2 B
A4247-17 17 108 223 125 MK2 B
A4247-17.25 17,25 112 228 130 MK2 B
A4247-17.5 17,5 112 228 130 MK2 B
A4247-17.75 17,75 112 228 130 MK2 B
A4247-18 18 112 228 130 MK2 B
A4247-18.25 18,25 116 233 135 MK2 B
A4247-18.5 18,5 116 233 135 MK2 B
A4247-18.75 18,75 116 233 135 MK2 B
A4247-19 19 116 233 135 MK2 B
A4247-19.25 19,25 120 238 140 MK2 B
A4247-19.5 19,5 120 238 140 MK2 B
A4247-19.75 19,75 120 238 140 MK2 B
A4247-20 20 120 238 140 MK2 B
A4247-20.25 20,25 123 243 145 MK2 B
A4247-20.5 20,5 123 243 145 MK2 B
A4247-20.75 20,75 123 243 145 MK2 B
Continued
plication
Primary ap
ation
Other applic
D1 B 474 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4247-21 21 123 243 145 MK2 B
A4247-21.25 21,25 127 248 150 MK2 B
Dc A4247-21.5 21,5 127 248 150 MK2 B
A4247-21.75 21,75 127 248 150 MK2 B
Lc A4247-22 22 127 248 150 MK2 B
l2
l1 A4247-22.25 22,25 127 248 150 MK2 B
A4247-22.5 22,5 131 253 155 MK2 B
A4247-22.75 22,75 131 253 155 MK2 B
A4247-23 23 131 253 155 MK2 B
A4247-23.5 23,5 131 276 155 MK3 B
A4247-24 24 135 281 160 MK3 B
A4247-24.5 24,5 135 281 160 MK3 B
A4247-25 25 135 281 160 MK3 B
A4247-25.5 25,5 138 286 165 MK3 B
A4247-26 26 138 286 165 MK3 B
A4247-26.5 26,5 138 286 165 MK3 B
A4247-27 27 142 291 170 MK3 B
A4247-27.5 27,5 142 291 170 MK3 B
A4247-28 28 142 291 170 MK3 B
A4247-28.5 28,5 145 296 175 MK3 B
A4247-29 29 145 296 175 MK3 B
A4247-29.5 29,5 145 296 175 MK3 B
A4247-30 30 145 296 175 MK3 B
A4247-30.5 30,5 148 301 180 MK3 B
A4247-31 31 148 301 180 MK3 B
A4247-31.5 31,5 148 301 180 MK3 B
A4247-32 32 151 334 185 MK4 B
A4247-32.5 32,5 151 334 185 MK4 B
A4247-33 33 151 334 185 MK4 B
A4247-33.5 33,5 151 334 185 MK4 B
A4247-34 34 154 339 190 MK4 B
A4247-34.5 34,5 154 339 190 MK4 B
A4247-35 35 154 339 190 MK4 B
A4247-36 36 157 344 195 MK4 B
A4247-37 37 157 344 195 MK4 B
A4247-38 38 160 349 200 MK4 B
A4247-39 39 160 349 200 MK4 B
A4247-40 40 160 349 200 MK4 B
D1 B 474 B 482

Solid drilling
B1
HSS twist drills with Morse taper, long
A4422
UFL®

~12×Dc 341
130°
P M K N S H O
Dc
Morse taper A4422-10 10 100 197 116 MK1 B
A4422-10.2 10,2 100 197 116 MK1 B
Dc A4422-10.5 10,5 100 197 116 MK1 B
A4422-10.8 10,8 107 206 125 MK1 B
Lc
A4422-11 11 107 206 125 MK1 B
l2
l1 A4422-11.2 11,2 107 206 125 MK1 B
A4422-11.5 11,5 107 206 125 MK1 B
A4422-11.8 11,8 107 206 125 MK1 B
A4422-12 12 120 215 134 MK1 B
A4422-12.2 12,2 120 215 134 MK1 B
A4422-12.5 12,5 120 215 134 MK1 B
A4422-12.8 12,8 120 215 134 MK1 B
A4422-13 13 120 215 134 MK1 B
A4422-13.2 13,2 120 215 134 MK1 B
A4422-13.5 13,5 128 223 142 MK1 B
A4422-13.8 13,8 128 223 142 MK1 B
A4422-14 14 128 223 142 MK1 B
A4422-14.25 14,25 132 245 147 MK2 B
A4422-14.5 14,5 132 245 147 MK2 B
A4422-14.75 14,75 132 245 147 MK2 B
A4422-15 15 132 245 147 MK2 B
A4422-15.25 15,25 137 251 153 MK2 B
A4422-15.5 15,5 137 251 153 MK2 B
A4422-15.75 15,75 137 251 153 MK2 B
A4422-16 16 137 251 153 MK2 B
A4422-16.25 16,25 142 257 159 MK2 B
A4422-16.5 16,5 142 257 159 MK2 B
A4422-16.75 16,75 142 257 159 MK2 B
A4422-17 17 142 257 159 MK2 B
A4422-17.25 17,25 147 263 165 MK2 B
A4422-17.5 17,5 147 263 165 MK2 B
A4422-17.75 17,75 147 263 165 MK2 B
A4422-18 18 147 263 165 MK2 B
A4422-18.25 18,25 152 269 171 MK2 B
A4422-18.5 18,5 152 269 171 MK2 B
A4422-18.75 18,75 152 269 171 MK2 B
A4422-19 19 152 269 171 MK2 B
A4422-19.25 19,25 157 275 177 MK2 B
A4422-19.5 19,5 157 275 177 MK2 B
A4422-19.75 19,75 157 275 177 MK2 B
A4422-20 20 157 275 177 MK2 B
A4422-20.5 20,5 162 282 184 MK2 B
A4422-21 21 162 282 184 MK2 B
A4422-21.5 21,5 168 289 191 MK2 B
Continued
plication
Primary ap
ation
Other applic
XIII D1 B 476 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4422-22 22 168 289 191 MK2 B
A4422-22.5 22,5 174 296 198 MK2 B
Dc A4422-23 23 174 296 198 MK2 B
A4422-23.5 23,5 174 319 198 MK3 B
Lc
A4422-24 24 181 327 206 MK3 B
l2
l1 A4422-24.5 24,5 181 327 206 MK3 B
A4422-25 25 181 327 206 MK3 B
A4422-26 26 187 335 214 MK3 B
A4422-27 27 194 343 222 MK3 B
A4422-28 28 194 343 222 MK3 B
A4422-29 29 200 351 230 MK3 B
A4422-30 30 200 351 230 MK3 B
A4422-31 31 207 360 239 MK3 B
XIII D1 B 476 B 482

Solid drilling
B1
HSS twist drills with Morse taper, long
A4411
– Type N DIN
~12×Dc 341
118°
P M K N S H O
Dc
Morse taper A4411-5 5 66 155 74 MK1 B
A4411-5.5 5,5 71 161 80 MK1 B
Dc A4411-6 6 71 161 80 MK1 B
A4411-6.5 6,5 75 167 86 MK1 B
Lc A4411-6.8 6,8 81 174 93 MK1 B
l2
l1 A4411-7 7 81 174 93 MK1 B
A4411-7.5 7,5 81 174 93 MK1 B
A4411-8 8 87 181 100 MK1 B
A4411-8.1 8,1 87 181 100 MK1 B
A4411-8.2 8,2 87 181 100 MK1 B
A4411-8.25 8,25 87 181 100 MK1 B
A4411-8.3 8,3 87 181 100 MK1 B
A4411-8.4 8,4 87 181 100 MK1 B
A4411-8.5 8,5 87 181 100 MK1 B
A4411-8.7 8,7 92 188 107 MK1 B
A4411-8.75 8,75 92 188 107 MK1 B
A4411-8.8 8,8 92 188 107 MK1 B
A4411-9 9 92 188 107 MK1 B
A4411-9.1 9,1 92 188 107 MK1 B
A4411-9.5 9,5 92 188 107 MK1 B
A4411-9.7 9,7 100 197 116 MK1 B
A4411-9.8 9,8 100 197 116 MK1 B
A4411-9.9 9,9 100 197 116 MK1 B
A4411-10 10 100 197 116 MK1 B
A4411-10.1 10,1 100 197 116 MK1 B
A4411-10.2 10,2 100 197 116 MK1 B
A4411-10.25 10,25 100 197 116 MK1 B
A4411-10.3 10,3 100 197 116 MK1 B
A4411-10.4 10,4 100 197 116 MK1 B
A4411-10.5 10,5 100 197 116 MK1 B
A4411-10.6 10,6 100 197 116 MK1 B
A4411-10.7 10,7 107 206 125 MK1 B
A4411-10.8 10,8 107 206 125 MK1 B
A4411-10.9 10,9 107 206 125 MK1 B
A4411-11 11 107 206 125 MK1 B
A4411-11.1 11,1 107 206 125 MK1 B
A4411-11.2 11,2 107 206 125 MK1 B
A4411-11.5 11,5 107 206 125 MK1 B
A4411-11.6 11,6 107 206 125 MK1 B
A4411-11.7 11,7 107 206 125 MK1 B
A4411-11.75 11,75 107 206 125 MK1 B
A4411-11.8 11,8 107 206 125 MK1 B
A4411-11.9 11,9 120 215 134 MK1 B
A4411-12 12 120 215 134 MK1 B
Continued
plication
Primary ap
ation
Other applic
D1 B 478 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4411-12.1 12,1 120 215 134 MK1 B
A4411-12.3 12,3 120 215 134 MK1 B
Dc A4411-12.5 12,5 120 215 134 MK1 B
A4411-12.75 12,75 120 215 134 MK1 B
Lc A4411-13 13 120 215 134 MK1 B
l2
l1 A4411-13.5 13,5 128 223 142 MK1 B
A4411-13.75 13,75 128 223 142 MK1 B
A4411-14 14 128 223 142 MK1 B
A4411-14.25 14,25 132 245 147 MK2 B
A4411-14.5 14,5 132 245 147 MK2 B
A4411-14.75 14,75 132 245 147 MK2 B
A4411-15 15 132 245 147 MK2 B
A4411-15.25 15,25 137 251 153 MK2 B
A4411-15.5 15,5 137 251 153 MK2 B
A4411-15.75 15,75 137 251 153 MK2 B
A4411-16 16 137 251 153 MK2 B
A4411-16.25 16,25 142 257 159 MK2 B
A4411-16.5 16,5 142 257 159 MK2 B
A4411-16.75 16,75 142 257 159 MK2 B
A4411-17 17 142 257 159 MK2 B
A4411-17.25 17,25 147 263 165 MK2 B
A4411-17.5 17,5 147 263 165 MK2 B
A4411-17.75 17,75 147 263 165 MK2 B
A4411-18 18 147 263 165 MK2 B
A4411-18.5 18,5 152 269 171 MK2 B
A4411-18.75 18,75 152 269 171 MK2 B
A4411-19 19 152 269 171 MK2 B
A4411-19.5 19,5 157 275 177 MK2 B
A4411-19.75 19,75 157 275 177 MK2 B
A4411-20 20 157 275 177 MK2 B
A4411-20.25 20,25 162 282 184 MK2 B
A4411-20.5 20,5 162 282 184 MK2 B
A4411-20.75 20,75 162 282 184 MK2 B
A4411-21 21 162 282 184 MK2 B
A4411-21.25 21,25 168 289 191 MK2 B
A4411-21.5 21,5 168 289 191 MK2 B
A4411-21.75 21,75 168 289 191 MK2 B
A4411-22 22 168 289 191 MK2 B
A4411-22.25 22,25 168 289 191 MK2 B
A4411-22.5 22,5 174 296 198 MK2 B
A4411-22.75 22,75 174 296 198 MK2 B
A4411-23 23 174 296 198 MK2 B
A4411-23.5 23,5 174 319 198 MK3 B
A4411-24 24 181 327 206 MK3 B
A4411-24.5 24,5 181 327 206 MK3 B
A4411-25 25 181 327 206 MK3 B
A4411-25.5 25,5 187 335 214 MK3 B
A4411-26 26 187 335 214 MK3 B
A4411-26.5 26,5 187 335 214 MK3 B
A4411-27 27 194 343 222 MK3 B
A4411-27.5 27,5 194 343 222 MK3 B
A4411-28 28 194 343 222 MK3 B
A4411-28.5 28,5 200 351 230 MK3 B
A4411-29 29 200 351 230 MK3 B
A4411-29.5 29,5 200 351 230 MK3 B
A4411-30 30 200 351 230 MK3 B
A4411-30.5 30,5 207 360 239 MK3 B
A4411-31 31 207 360 239 MK3 B
A4411-31.5 31,5 207 360 239 MK3 B
A4411-32 32 214 397 248 MK4 B
A4411-32.5 32,5 214 397 248 MK4 B
A4411-33 33 214 397 248 MK4 B
Continued
D1 B 478 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4411-34 34 221 406 257 MK4 B
A4411-34.5 34,5 221 406 257 MK4 B
Dc A4411-35 35 221 406 257 MK4 B
A4411-36 36 229 416 267 MK4 B
Lc A4411-37 37 229 416 267 MK4 B
l2
l1 A4411-37.5 37,5 229 416 267 MK4 B
A4411-38 38 237 426 277 MK4 B
A4411-38.5 38,5 237 426 277 MK4 B
A4411-39 39 237 426 277 MK4 B
A4411-40 40 237 426 277 MK4 B
A4411-41 41 244 436 287 MK4 B
A4411-42 42 244 436 287 MK4 B
A4411-43 43 253 447 298 MK4 B
A4411-44 44 253 447 298 MK4 B
A4411-45 45 253 447 298 MK4 B
A4411-46 46 262 459 310 MK4 B
A4411-47 47 262 459 310 MK4 B
A4411-48 48 271 470 321 MK4 B
A4411-50 50 271 470 321 MK4 B
plication
Primary ap
ation
Other applic
D1 B 478 B 482

Solid drilling
B1
HSS drills with Morse taper, extra long
A4622
UFL®

~16×Dc 1870-I
130°
P M K N S H O
Dc
Morse taper A4622-12 12 191 310 205 MK1 B
A4622-12.5 12,5 191 310 205 MK1 B
Dc A4622-13 13 191 310 205 MK1 B
A4622-13.5 13,5 206 325 220 MK1 B
Lc
A4622-14 14 206 325 220 MK1 B
l2
l1 A4622-14.5 14,5 205 340 220 MK2 B
A4622-15 15 205 340 220 MK2 B
A4622-15.5 15,5 214 355 230 MK2 B
A4622-16 16 214 355 230 MK2 B
A4622-16.5 16,5 213 355 230 MK2 B
A4622-17 17 213 355 230 MK2 B
A4622-17.5 17,5 227 370 245 MK2 B
A4622-18 18 227 370 245 MK2 B
A4622-18.5 18,5 226 370 245 MK2 B
A4622-19 19 226 370 245 MK2 B
A4622-19.5 19,5 240 385 260 MK2 B
A4622-20 20 240 385 260 MK2 B
A4622-21 21 238 385 260 MK2 B
A4622-22 22 247 405 270 MK2 B
A4622-23 23 246 405 270 MK2 B
A4622-24 24 265 440 290 MK3 B
A4622-25 25 265 440 290 MK3 B
A4622-26 26 263 440 290 MK3 B
A4622-27 27 277 460 305 MK3 B
A4622-28 28 277 460 305 MK3 B
A4622-29 29 275 460 305 MK3 B
A4622-30 30 275 460 305 MK3 B
XIII D1 B 478 B 482

Solid drilling
B1
A4611
– Type N DIN
~16×Dc 1870-I
118°
P M K N S H O
Uncoated C C C C C C
Dc
Morse taper A4611-8 8 152 265 165 MK1 B
A4611-8.5 8,5 152 265 165 MK1 B
Dc A4611-9 9 160 275 175 MK1 B
A4611-9.5 9,5 160 275 175 MK1 B
Lc A4611-10 10 169 285 185 MK1 B
l2
l1 A4611-10.5 10,5 169 285 185 MK1 B
A4611-11 11 177 300 195 MK1 B
A4611-11.5 11,5 177 300 195 MK1 B
A4611-12 12 191 310 205 MK1 B
A4611-12.5 12,5 191 310 205 MK1 B
A4611-13 13 191 310 205 MK1 B
A4611-13.5 13,5 206 325 220 MK1 B
A4611-14 14 206 325 220 MK1 B
A4611-14.5 14,5 205 340 220 MK2 B
A4611-15 15 205 340 220 MK2 B
A4611-15.5 15,5 214 355 230 MK2 B
A4611-16 16 214 355 230 MK2 B
A4611-16.5 16,5 213 355 230 MK2 B
A4611-17 17 213 355 230 MK2 B
A4611-17.5 17,5 227 370 245 MK2 B
A4611-18 18 227 370 245 MK2 B
A4611-18.5 18,5 226 370 245 MK2 B
A4611-19 19 226 370 245 MK2 B
A4611-19.5 19,5 240 385 260 MK2 B
A4611-20 20 240 385 260 MK2 B
A4611-20.5 20,5 238 385 260 MK2 B
A4611-21 21 238 385 260 MK2 B
A4611-21.5 21,5 247 405 270 MK2 B
A4611-22 22 247 405 270 MK2 B
A4611-22.5 22,5 246 405 270 MK2 B
A4611-23 23 246 405 270 MK2 B
A4611-23.5 23,5 246 425 270 MK3 B
A4611-24 24 265 440 290 MK3 B
A4611-24.5 24,5 265 440 290 MK3 B
A4611-25 25 265 440 290 MK3 B
A4611-25.5 25,5 263 440 290 MK3 B
A4611-26 26 263 440 290 MK3 B
A4611-26.5 26,5 263 440 290 MK3 B
A4611-27 27 277 460 305 MK3 B
A4611-28 28 277 460 305 MK3 B
A4611-29 29 275 460 305 MK3 B
A4611-30 30 275 460 305 MK3 B
A4611-31 31 288 480 320 MK3 B
A4611-32 32 286 505 320 MK4 B
Continued
plication
Primary ap
ation
Other applic
D1 B 478 B 482

Solid drilling
B1
Continued
Dc
Morse taper A4611-33 33 286 505 320 MK4 B
A4611-34 34 304 530 340 MK4 B
Dc A4611-35 35 304 530 340 MK4 B
A4611-36 36 302 530 340 MK4 B
Lc A4611-37 37 302 530 340 MK4 B
l2
l1 A4611-38 38 320 555 360 MK4 B
A4611-39 39 320 555 360 MK4 B
A4611-40 40 320 555 360 MK4 B
A4611-41 41 317 555 360 MK4 B
A4611-42 42 317 555 360 MK4 B
A4611-45 45 340 585 385 MK4 B
A4611-48 48 355 605 405 MK4 B
A4611-50 50 355 605 405 MK4 B
D1 B 478 B 482

Solid drilling
B1
A4722
UFL®

~22×Dc 1870-II
130°
P M K N S H O
Dc
Morse taper A4722-8 8 197 330 210 MK1 B
A4722-8.5 8,5 197 330 210 MK1 B
Dc A4722-9 9 205 345 220 MK1 B
A4722-10 10 219 360 235 MK1 B
Lc
A4722-10.5 10,5 219 360 235 MK1 B
l2
l1 A4722-11 11 232 375 250 MK1 B
A4722-11.5 11,5 232 375 250 MK1 B
A4722-12 12 246 395 260 MK1 B
A4722-12.5 12,5 246 395 260 MK1 B
A4722-13 13 246 395 260 MK1 B
A4722-13.5 13,5 261 410 275 MK1 B
A4722-14 14 261 410 275 MK1 B
A4722-14.5 14,5 260 425 275 MK2 B
A4722-15 15 260 425 275 MK2 B
A4722-15.5 15,5 279 445 295 MK2 B
A4722-16 16 279 445 295 MK2 B
A4722-16.5 16,5 278 445 295 MK2 B
A4722-17 17 278 445 295 MK2 B
A4722-17.5 17,5 292 465 310 MK2 B
A4722-18 18 292 465 310 MK2 B
A4722-18.5 18,5 291 465 310 MK2 B
A4722-19 19 291 465 310 MK2 B
A4722-19.5 19,5 305 490 325 MK2 B
A4722-20 20 305 490 325 MK2 B
A4722-21 21 303 490 325 MK2 B
A4722-22 22 322 515 345 MK2 B
A4722-23 23 321 515 345 MK2 B
A4722-24 24 340 555 365 MK3 B
A4722-25 25 340 555 365 MK3 B
A4722-26 26 338 555 365 MK3 B
A4722-27 27 357 580 385 MK3 B
A4722-28 28 357 580 385 MK3 B
A4722-29 29 355 580 385 MK3 B
A4722-30 30 355 580 385 MK3 B
A4722-31 31 378 610 410 MK3 B
A4722-32 32 376 635 410 MK4 B
A4722-33 33 376 635 410 MK4 B
A4722-34 34 394 665 430 MK4 B
A4722-35 35 394 665 430 MK4 B
A4722-38 38 420 695 460 MK4 B
A4722-40 40 420 695 460 MK4 B
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
HSS multi diameter/chamfer drills
K6221
– Countersink DIN 74, form A − Dc for through holes DIN ISO 273 DIN
8374
118° 90°
P M K N S H O
Dc Dc1 d1
Designation h9 h8 Lc Lc1 l1 l2 h8
Uncoated Size mm mm mm mm mm mm mm
Parallel shank K6221-6 M3 3,2 6 9 45 93 57 6
K6221-8 M4 4,3 8 11 59 117 75 8
Dc Dc1 d1
90° K6221-10 M5 5,3 10 13 72 133 87 10
K6221-11.5 M6 6,4 11,5 15 77 142 94 11,5
Lc K6221-15 M8 8,4 15 19 92 169 114 15
Lc1
l2
l1
XIII D1 B 478 B 482

Solid drilling
B1
K6222
– For holes in accordance with DIN 336, Part 1

– Dc for through holes DIN ISO 273 DIN
8378
118° 90°
P M K N S H O
Dc Dc1 d1
Parallel shank K6222-3.4 M3 2,5 3,4 9 32 70 39 3,4
K6222-4.5 M4 3,3 4,5 11 38 80 47 4,5
Dc Dc1 d1
90° K6222-5.5 M5 4,2 5,5 14 46 93 57 5,5
K6222-6.6 M6 5 6,6 17 50 101 63 6,6
Lc K6222-9 M8 6,8 9 21 68 125 81 9
Lc1 K6222-11 M 10 8,5 11 26 78 142 94 11
l2
l1
K6222-13.5 M 12 10,2 13,5 30 88 160 108 13,5
plication
Primary ap
ation
Other applic
XIII D1 B 478 B 482

Solid drilling
B1
K6223
– Countersink DIN 74, T.2, form H − Dc for through holes DIN ISO 273 DIN
8376
118° 180°
P M K N S H O
Dc Dc1 d1
Parallel shank K6223-8 M4 4,5 8 11 59 117 75 8
K6223-10 M5 5,5 10 13 72 133 87 10
Dc Dc1 d1
180° K6223-11 M6 6,6 11 15 78 142 94 11
K6223-15 M8 9 15 19 92 169 114 15
Lc
K6223-18 M 10 11 18 23 103 191 130 18
Lc1
l2
l1
XIII D1 B 479 B 482

Solid drilling
B1
HSS Taper pin hole drills
K2929
– For tapered pin hole in accordance with DIN 1, 258, 7977, 7978
– Dc corresponds to the nominal diameter of the tapered pin DIN
1898 A
1:50
P M K N S H O
Designation Dc d3 Lc l1 l5 l15 d1
Uncoated mm mm mm mm mm mm mm
Parallel shank K2929-2 2 1,9 48 86 29 5 3,15
K2929-3 3 2,9 58 100 32 5 4
d3 Dc d1 K2929-4 4 3,9 68 112 34 5 5
K2929-5 5 4,9 73 122 38 5 6,3
l15 K2929-6 6 5,9 105 160 42 5 8
Lc l5 K2929-8 8 7,9 145 207 46 5 10
l1
K2929-10 10 9,9 175 245 50 5 12,5
K2929-12 12 11,8 210 290 58 10 16
plication
Primary ap
ation
Other applic
D1 B 479 B 482

Solid drilling
B1
HSS Taper pin hole drills
K4929
– For tapered pin hole in accordance with DIN 1; 258; 7977; 7978
– Dc corresponds to the nominal diameter of the tapered pin DIN
1898 B
1:50
P M K N S H O
Designation Dc d3 Lc l1 l15
Uncoated mm mm mm mm mm MT
Morse taper K4929-8 8 7,9 145 227 5 MK1 B
K4929-10 10 9,9 175 257 5 MK1 B
d3 Dc K4929-12 12 11,8 210 315 10 MK2 B
K4929-14 14 13,8 220 325 10 MK2 B
l15 K4929-16 16 15,8 230 335 10 MK2 B
Lc K4929-20 20 19,8 250 377 10 MK3 B
l1
K4929-25 25 24,7 300 427 15 MK3 B
D1 B 479 B 482

Solid drilling
B1
HSS-E A1244 twist drill – Set
Z3515, Z3516
– Type VA DIN
~8×Dc 338
130°
P M K N S H O
Uncoated C CC C CC
Designation Sets Including

Uncoated Dia. mm pilot-hole drills Pitch Quantity
3,3
4,2
Z3515-1-10.5 1,0–10,5 0,5 24
6,8
10,2
Designation Sets
Uncoated Dia. mm Pitch Quantity
Z3516-1-13 1,0–13,0 0,5 25
For the dimensions for the A1244 twist drill, please see page B 298
D1 B 371 B 371

Solid drilling
B1
HSS-E A1222 twist drill – Set
Z3518
UFL®
DIN
~8×Dc 338
130°
P M K N S H O
Uncoated C CC C CC
Designation Sets Including

Uncoated Dia. mm pilot-hole drill Pitch Quantity
3,3
4,2
Z3518-1-10.5 1,0–10,5 0,5 24
6,8
10,2
plication
Primary ap
ation
Other applic
XIII D1 B 371 B 371

Solid drilling
B1
A1211 HSS twist drill – Set
Z3213, Z3216
– Type N DIN
~8×Dc 338
130°
P M K N S H O
Designation Sets
Z3213-1-6 1,0–6,0 0,1 51
Designation Sets
Z3216-6-10 6,0–10,0 0,1 41
D1 B 371 B 371

Solid drilling
B1
A1211TIN/A1211 HSS twist drill – Set
Z3218TIN, Z3218, Z3219TIN, Z3219
DIN
~8×Dc 338
– Type N 130°
P M K N S H O
TIN CC C CC C C C
Designation Designation Sets Including

TIN Uncoated Dia. mm pilot-hole drill Pitch Quantity
3,3
4,2
Z3218TIN-1-10.5 Z3218-1-10.5 1,0–10,5 0,5 24
6,8
10,2
Designation Designation Sets

TIN Uncoated Dia. mm Pitch Quantity
Z3219TIN-1-13 Z3219-1-13 1,0–13,0 0,5 25
For the dimensions for the A1211TIN/A1211 twist drill, please see page B 308
plication
Primary ap
ation
Other applic
D1 B 371 B 371

Solid drilling
B1

Machining
Countersink angle 90° 120°
Designation A1174 A1115 A1115S A1115L A1174C A1114 A1114S A1114L

Cutting tool material Solid carbide HSS HSS HSS Solid carbide HSS HSS HSS
Coating Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated
Dia. range [mm] 3–20 4–20 2–25,4 4–25,4 3–16 4–20 2–25,4 4–12,7
Page B 380 B 381 B 382 B 383 B 384 B 385 B 386 B 387

Solid drilling
B1
Walter Select – Solid carbide and HSS NC centre drills

STEP 1
Code Machining
structure


vermicular graphite


S S1–S10
cutting properties
alloys

chilled cast iron

O O1–O6 Other
plastics, graphite
B 376 Solid carbide and HSS NC centre drills

Solid drilling
B1

Select your tool from the table from
page B 378 onwards: Machining
– In accordance with the form

(e.g. in accordance with 90° or 120° Countersink angle 90° 120°
Designation A1174 A1115 A1115S A1115L A1174C

countersink angle)
– For the relevant machining group Cutting tool material Solid carbide HSS HSS HSS Solid carbide
(see step 1: P1–P15; M1–M3; …; O1–O6) Coating Uncoated Uncoated Uncoated Uncoated Uncoated
Shank Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical
Dia. range [mm] 3–20 4–20 2–25,4 4–25,4 3–16
Page B 380 B 381 B 382 B 383 B 384
P Steel CC CC CC
STEP 3 Cutting data for solid carbide and HSS NC spot drills
Select your cutting data from the table The specified cutting data are average standard values.
from page B 487 onwards:

¤ ¤
= Wet machining (E = emulsion, O = oil)

Designation A1174
A1174C
A1115 / A1114
A1115S / A1114S
A1115L / A1114L
= Dry machining is possible (M = MQL, L = dry) Countersink angle 90° and 120° 90° and 120°
The cutting data must be selected from Walter GPS Dia. range (mm) 3,00–20,00 2,00–25,40
– Cutting speed: vc vc
VRR
= Cutting speed
Cutting tool material
Coating
K30F
Uncoated
HSS
Uncoated
– Feed: VRR (feed rating chart) Page B 380; B 384 B 381–B 383; B 385–B 387
* The classification of the machining groups can be found in the material group
comparison table

Tensile strength Rm
Brinell hardness HB
Machining group *
tool. You will find the cutting speed vc

Material group
and the VRR there.

N/mm2
Overview of the main material groups and code letters

The feed rating chart (VRR) can be found C ≤ 0.25% Annealed 125 430 P1
vc VRR vc
32
VRR
8 EO
on page B 492.
¤ ¤
C > 0.25... ≤ 0.55%
C > 0.25... ≤ 0.55%
Annealed
Heat-treated
190
210
640
710
P2
P3
32
30
9
9
EO
EO
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 32 9 EO
C > 0.55% Heat-treated 300 1010 P5 21 8 EO
Free cutting steel (short-chipping) Annealed 220 750 P6 32 9 EO
Annealed 175 590 P7 32 9 EO
P Heat-treated 285 960 P8 21 8 EO
Low-alloyed steel
Heat-treated 380 1280 P9 11 7 OE
Heat-treated 430 1480 P10 8 6 OE
Annealed 200 680 P11 21 8 EO
Hardened and tempered 300 1010 P12 15 7 EO
Hardened and tempered 380 1280 P13 8 6 OE
Ferritic/martensitic, annealed 200 680 P14 9 4 EO
Stainless steel
Martensitic, heat-treated 330 1110 P15 8 4 EO
Austenitic, quench hardened 200 680 M1 6 3 OE
M

Solid drilling
B1
Walter Select
Machining
Countersink angle 90° 120°
Designation A1174 A1115 A1115S A1115L A1174C
Cutting tool material Solid carbide HSS HSS HSS Solid carbide
Coating Uncoated Uncoated Uncoated Uncoated Uncoated
Shank Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical
Dia. range [mm] 3–20 4–20 2–25,4 4–25,4 3–16
Page B 380 B 381 B 382 B 383 B 384
P Steel CC CC CC
M Stainless steel C C C
K Cast iron C CC CC CC C
S Materials with difficult cutting properties CC C C C CC
H Hard materials
O Other CC CC CC CC CC

Solid drilling
B1
120°
A1114 A1114S A1114L
HSS HSS HSS

Uncoated Uncoated Uncoated
Cylindrical Cylindrical Cylindrical
4–20 2–25,4 4–12,7
B 385 B 386 B 387
CC CC CC
C C C
CC CC CC
CC CC CC
C C C
CC CC CC
plication
Primary ap
ation
Other applic

Solid drilling
B1
90° solid carbide NC spot drills
A1174
90°
P M K N S H O
Uncoated C CC CC CC
Dc d1
Designation h6 Dc l1 l2 h6
Uncoated mm inches/no. mm mm mm
Parallel shank A1174-3 3 46 11 3
A1174-4 4 55 15 4
Dc d1 A1174-5 5 62 16 5
A1174-6 6 66 17 6
l2
A1174-1/4IN 6,35 1/4“ 70 18 6,35
l1
A1174-8 8 79 22 8
A1174-3/8IN 9,525 3/8“ 89 26 9,525
A1174-10 10 89 26 10
A1174-12 12 102 30 12
A1174-16 16 115 34 16
A1174-20 20 131 40 20
D1 B 487

Solid drilling
B1
90° HSS NC spot drills
A1115
90°
P M K N S H O
Uncoated CC C CC CC C CC
Dc d1
Designation h8 l1 l2 f11
Uncoated mm mm mm mm
A1115-5 5 62 21 5
Dc d1 A1115-6 6 66 22 6
A1115-8 8 79 30 8
l2
A1115-10 10 89 34 10
l1
A1115-12 12 102 41 12
A1115-16 16 115 46 16
A1115-20 20 131 53 20
plication
Primary ap
ation
Other applic
D1 B 487

Solid drilling
B1
A1115S
90°
P M K N S H O
Dc d1
Parallel shank A1115S-2 2 40 8 2
A1115S-3 3 50 10 3
Dc d1 A1115S-4 4 52 12 4
A1115S-5 5 60 15 5
l2
A1115S-6 6 66 20 6
l1
A1115S-1/4IN 6,35 1/4“ 66 20 6,35
A1115S-8 8 79 25 8
A1115S-3/8IN 9,525 3/8“ 89 25 9,525
A1115S-10 10 89 25 10
A1115S-12 12 102 30 12
A1115S-1/2IN 12,7 1/2“ 102 35 12,7
A1115S-14 14 115 35 14
A1115S-5/8IN 15,875 5/8“ 115 35 15,875
A1115S-16 16 115 35 16
A1115S-18 18 130 40 18
A1115S-3/4IN 19,05 3/4“ 131 40 19,05
A1115S-20 20 131 40 20
A1115S-1IN 25,4 1“ 138 45 25,4
D1 B 487

Solid drilling
B1
A1115L
90°
P M K N S H O
Dc d1
Parallel shank A1115L-4 4 100 12 4
A1115L-5 5 120 15 5
Dc d1 A1115L-6 6 140 20 6
A1115L-1/4IN 6,35 1/4“ 140 20 6,35
l2
A1115L-8 8 140 25 8
l1
A1115L-3/8IN 9,525 3/8“ 170 25 9,525
A1115L-10 10 170 25 10
A1115L-12 12 170 30 12
A1115L-1/2IN 12,7 1/2“ 170 30 12,7
A1115L-5/8IN 15,875 5/8“ 200 35 15,875
A1115L-3/4IN 19,05 3/4“ 200 40 19,05
A1115L-20 20 200 40 20
A1115L-1IN 25,4 1“ 200 40 25,4
plication
Primary ap
ation
Other applic
D1 B 487

Solid drilling
B1
120° solid carbide NC spot drills
A1174C
120°
P M K N S H O
Uncoated C CC CC CC
Dc d1
Parallel shank A1174C-3 3 46 11 3
A1174C-4 4 55 15 4
Dc d1 A1174C-5 5 62 16 5
A1174C-6 6 66 17 6
l2
A1174C-1/4IN 6,35 1/4“ 70 18 6,35
l1
A1174C-8 8 79 22 8
A1174C-10 10 89 26 10
A1174C-12 12 102 30 12
A1174C-1/2IN 12,7 1/2“ 102 30 12,7
A1174C-5/8IN 15,875 5/8“ 115 34 15,875
A1174C-16 16 115 34 16
D1 B 487

Solid drilling
B1
A1114
120°
P M K N S H O
Dc d1
Designation h8 l1 l2 f11
Uncoated mm mm mm mm
A1114-5 5 62 21 5
Dc d1 A1114-6 6 66 22 6
A1114-8 8 79 30 8
l2
A1114-10 10 89 34 10
l1
A1114-12 12 102 41 12
A1114-16 16 115 46 16
A1114-20 20 131 53 20
plication
Primary ap
ation
Other applic
D1 B 487

Solid drilling
B1
A1114S
120°
P M K N S H O
Dc d1
Parallel shank A1114S-2 2 40 8 2
A1114S-3 3 50 10 3
Dc d1 A1114S-4 4 52 12 4
A1114S-5 5 60 15 5
l2
A1114S-6 6 66 20 6
l1
A1114S-1/4IN 6,35 1/4“ 66 20 6,35
A1114S-8 8 79 25 8
A1114S-3/8IN 9,525 3/8“ 89 25 9,525
A1114S-10 10 89 25 10
A1114S-12 12 102 30 12
A1114S-1/2IN 12,7 1/2“ 102 35 12,7
A1114S-14 14 115 35 14
A1114S-5/8IN 15,875 5/8“ 115 35 15,875
A1114S-3/4IN 19,05 3/4“ 131 40 19,05
A1114S-1IN 25,4 1“ 138 45 25,4
D1 B 487

Solid drilling
B1
A1114L
120°
P M K N S H O
Dc d1
Parallel shank A1114L-4 4 100 12 4
A1114L-5 5 120 15 5
Dc d1 A1114L-6 6 140 20 6
A1114L-1/4IN 6,35 1/4“ 140 20 6,35
l2
A1114L-8 8 140 25 8
l1
A1114L-3/8IN 9,525 3/8“ 170 25 9,525
A1114L-10 10 170 25 10
A1114L-12 12 170 30 12
A1114L-1/2IN 12,7 1/2“ 170 30 12,7
plication
Primary ap
ation
Other applic
D1 B 487

Solid drilling
B1
B 388 Solid carbide and HSS centre drills

Solid drilling
B1

Machining
Form A
Designation K1161XPL K1161 K1111TIN K1111 K1112 K1131 K1311 K1411S K1411M
Standard DIN 333-A DIN 333-A DIN 333-A DIN 333-A DIN 333-A DIN 333-A - LH Walter Walter Walter
Cutting tool material Solid carbide Solid carbide HSS HSS HSS HSS HSS HSS HSS
Coating XPL Uncoated TIN Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated
Dia. range [mm] 0,5–6,3 0,5–6,3 1–5 0,5–12,5 1,6–5 0,5–6,3 0,63–6 0,75–5 0,75–4
Page B 396 B 396 B 397 B 397 B 398 B 399 B 400 B 401 B 402
Machining
Form A B R D
Designation K1411L K1811 K1911 K1215 K1113TIN K1113 K1114 K1313 K2511
Standard Walter ANSI B 94.11 B.S. 328 DIN 333-B DIN 333-R DIN 333-R DIN 333-R Walter Walter
Cutting tool material HSS HSS HSS HSS HSS HSS HSS HSS HSS
Coating Uncoated Uncoated Uncoated Uncoated TIN Uncoated Uncoated Uncoated Uncoated
Dia. range [mm] 2–4 0,64–7,94 1,19–7,94 1–10 1–5 0,5–10 1,6–5 1–4 3,3–21
Page B 403 B 404 B 405 B 406 B 407 B 407 B 408 B 409 B 410
Machining
Form DR
Designation K2513
Standard Walter
Cutting tool material HSS
Coating Uncoated
Dia. range [mm] 3,3–21

Page B 411

Solid drilling
B1
Walter Select – Solid carbide and HSS centre drills

STEP 1
Code Machining
structure


vermicular graphite

Materials with difficult Heat-resistant special alloys based on iron,

S S1–S10
cutting properties nickel and cobalt, titanium and titanium alloys

chilled cast iron

O O1–O6 Other
plastics, graphite

Solid drilling
B1

Select your tool from the table from
page B 392 onwards Machining
– In accordance with the form or standard

(e.g. form R) Form A
Designation K1161XPL K1161 K1111TIN K1111 K1112

(see step 1: P1–P15; M1–M3; …; O1–O6) Standard DIN 333-A DIN 333-A DIN 333-A DIN 333-A DIN 333-A
Cutting tool material Solid carbide Solid carbide HSS HSS HSS
Coating XPL Uncoated TIN Uncoated Uncoated
Shank Cylindrical Cylindrical Cylindrical Cylindrical Parallel shank

with flat
Dia. range [mm] 0,5–6,3 0,5–6,3 1–5 0,5–12,5 1,6–5
Page B 396 B 396 B 397 B 397 B 398
STEP 3 Cutting data for solid carbide and HSS centre drills
from page B 488 onwards: = Wet machining (E = emulsion, O = oil)
Standard
Designation K1161XPL
DIN 333
K1161

The cutting data must be selected from Walter GPS Form A A
– Cutting speed: vc vc = Cutting speed
Dia. range (mm)
Cutting tool material
0,50–6,30
K10/20
0,50–6,30
K10/20
VRR = Feed rating chart from page B 492 onwards
– Feed: VRR (feed rating chart) Coating
Page
XPL
B 396
Uncoated
B 396
* The classification of the machining groups can be found in the material group comparison table

tool. You will find the cutting speed vc
Tensile strength Rm
Brinell hardness HB
Machining group *
Overview of the main material groups and code letters

Material group
and the VRR there.

N/mm2
The feed rating chart (VRR) can be found Material

vc VRR vc VRR
on page B 492. C ≤ 0.25%
C > 0.25... ≤ 0.55%
Annealed
Annealed
125
190
430
640
P1
P2
72
68
6
6
EO
EO
ML
ML
48
45
6
6
EO
EO
ML
ML
C > 0.25... ≤ 0.55% Heat-treated 210 710 P3 63 6 EO ML 42 6 EO ML
Non-alloyed steel
C > 0.55% Annealed 190 640 P4 68 6 EO ML 45 6 EO ML
C > 0.55% Heat-treated 300 1010 P5 48 5 EO ML 32 5 EO ML
Free cutting steel (short-chipping) Annealed 220 750 P6 72 6 EO ML 48 6 EO ML
Annealed 175 590 P7 68 6 EO ML 45 6 EO ML
P Heat-treated 285 960 P8 48 5 EO ML 32 5 EO ML
Low-alloyed steel
Annealed 200 680 P11 42 4 EO 28 4 EO
Hardened and tempered 380 1280 P13 24 2 OE 16 2 OE
Ferritic/martensitic, annealed 200 680 P14 42 4 EO 28 4 EO
Stainless steel
Martensitic, heat-treated 330 1110 P15 32 3 EO 21 3 EO

Solid drilling
B1
Walter Select
Machining
Form A
Designation K1161XPL K1161 K1111TIN K1111 K1112
Standard DIN 333-A DIN 333-A DIN 333-A DIN 333-A DIN 333-A
Cutting tool material Solid carbide Solid carbide HSS HSS HSS
Coating XPL Uncoated TIN Uncoated Uncoated
Shank Cylindrical Cylindrical Cylindrical Cylindrical Parallel shank

with flat
Dia. range [mm] 0,5–6,3 0,5–6,3 1–5 0,5–12,5 1,6–5
Page B 396 B 396 B 397 B 397 B 398
M Stainless steel CC CC CC CC CC
S Materials with difficult cutting properties CC CC CC CC CC
H Hard materials CC C

Solid drilling
B1
K1131 K1311 K1411S K1411M K1411L K1811 K1911
DIN 333-A - LH Walter Walter Walter Walter ANSI B 94.11 B.S. 328
HSS HSS HSS HSS HSS HSS HSS

Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated Uncoated
Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical Cylindrical
0,5–6,3 0,63–6 0,75–5 0,75–4 2–4 0,64–7,94 1,19–7,94
B 399 B 400 B 401 B 402 B 403 B 404 B 405
plication
Primary ap
ation
Other applic

Solid drilling
B1
Walter Select
Machining
Form B R
Designation K1215 K1113TIN K1113 K1114 K1313
Standard DIN 333-B DIN 333-R DIN 333-R DIN 333-R Walter

Coating Uncoated TIN Uncoated Uncoated Uncoated
Shank Cylindrical Cylindrical Cylindrical Parallel shank Cylindrical

with flat
Dia. range [mm] 1–10 1–5 0,5–10 1,6–5 1–4
Page B 406 B 407 B 407 B 408 B 409
M Stainless steel CC CC CC CC CC
S Materials with difficult cutting properties CC CC CC CC CC
H Hard materials

Solid drilling
B1
D DR
K2511 K2513
Walter Walter
HSS HSS
Uncoated Uncoated
Parallel shank Parallel shank

with flat with flat
3,3–21 3,3–21
B 410 B 411
CC CC
CC CC
CC CC
CC CC
CC CC
CC CC
plication
Primary ap
ation
Other applic

Solid drilling
B1
Solid carbide centre drills
K1161XPL / K1161
DIN
– For straight contact surfaces in accordance with DIN 332 A 333
– Form A 60°
P M K N S H O
XPL CC CC CC CC CC CC CC
Uncoated CC CC CC CC CC C CC
Dc d1
Designation Designation k12 l1 h9
XPL Uncoated mm mm mm
Parallel shank K1161XPL-0.5 K1161-0.5 0,5 25 3,15
K1161XPL-0.8 K1161-0.8 0,8 25 3,15
Dc
K1161XPL-1 K1161-1 1 31,5 3,15
d1
K1161XPL-1.25 K1161-1.25 1,25 31,5 3,15
K1161XPL-1.6 K1161-1.6 1,6 35,5 4
l1
K1161XPL-2 K1161-2 2 40 5
K1161XPL-2.5 K1161-2.5 2,5 45 6,3
K1161XPL-3.15 K1161-3.15 3,15 50 8
K1161XPL-4 K1161-4 4 56 10
K1161XPL-5 K1161-5 5 63 12,5
K1161XPL-6.3 K1161-6.3 6,3 71 16
Dc 0.5/0.8 mm, single sided
D1 B 488

Solid drilling
B1
HSS centre drills
K1111 / K1111TIN
DIN
– For straight contact surfaces in accordance with DIN 332 A 333
– Form A 60°
P M K N S H O
TIN CC CC CC CC CC CC
Dc d1
Designation Designation k12 l1 h9
TIN Uncoated mm mm mm
Parallel shank K1111-0.5 0,5 25 3,15
K1111-0.8 0,8 25 3,15
Dc
K1111TIN-1 K1111-1 1 31,5 3,15
d1
K1111TIN-1.25 K1111-1.25 1,25 31,5 3,15
K1111TIN-1.6 K1111-1.6 1,6 35,5 4
l1
K1111TIN-2 K1111-2 2 40 5
K1111TIN-2.5 K1111-2.5 2,5 45 6,3
K1111TIN-3.15 K1111-3.15 3,15 50 8
K1111TIN-4 K1111-4 4 56 10
K1111TIN-5 K1111-5 5 63 12,5
K1111-6.3 6,3 71 16
K1111-8 8 80 20
K1111-10 10 100 25
K1111-12.5 12,5 125 31,5
plication
Primary ap
ation
Other applic
D1 B 488

Solid drilling
B1
HSS centre drills
K1112
– For straight contact surfaces in accordance with DIN 332 A

– Form A with flat on shank DIN
333
60°
P M K N S H O
Dc d1
Designation k12 l1 h9
Uncoated mm mm mm
Parallel shank with flat K1112-1.6 1,6 35,5 4
K1112-2 2 40 5
Dc
K1112-2.5 2,5 45 6,3
d1
K1112-3.15 3,15 50 8
K1112-4 4 56 10
l1
K1112-5 5 63 12,5
D1 B 488

Solid drilling
B1
HSS centre drills, left hand
K1131

– Form A DIN
333 LH
60°
P M K N S H O
Dc d1
Uncoated mm mm mm
Parallel shank K1131-0.5 0,5 25 3,15
K1131-0.8 0,8 25 3,15
Dc
K1131-1 1 31,5 3,15
d1
K1131-1.25 1,25 31,5 3,15
K1131-1.6 1,6 35,5 4
l1
K1131-2 2 40 5
K1131-2.5 2,5 45 6,3
K1131-3.15 3,15 50 8
K1131-4 4 56 10
K1131-5 5 63 12,5
K1131-6.3 6,3 71 16
plication
Primary ap
ation
Other applic
D1 B 488

Solid drilling
B1
HSS centre drills
K1311

– Form A
60°
P M K N S H O
Dc d1
Uncoated mm mm mm
Parallel shank K1311-0.63 0,63 20 3,15
K1311-0.75 0,75 35 3,5
Dc
K1311-1 1 31,5 4
d1
K1311-1.5 1,5 40 5
K1311-1.6 1,6 40 5
l1
K1311-2 2 45 6
K1311-2.5 2,5 50 8
K1311-3 3 56 10
K1311-3.15 3,15 56 10
K1311-4 4 66 12
K1311-5 5 78 14
K1311-6 6 90 18
Dc 0.63 mm, single sided
D1 B 488

Solid drilling
B1
HSS centre drills, long
K1411S

– Form A
60°
P M K N S H O
Dc d1
Uncoated mm mm mm
Parallel shank K1411S-0.75X3.5 0,75 60 3,5
K1411S-1X4 1 60 4
Dc
K1411S-1.5X5 1,5 60 5
d1
K1411S-2X6 2 80 6
K1411S-2.5X8 2,5 80 8
l1
K1411S-3X8 3 80 8
K1411S-4X10 4 100 10
K1411S-5X14 5 120 1

General Catalogue 2016 en

Uploaded by

Copyright:

Available Formats

General Catalogue 2016 en

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Catalogue 2016 en

Uploaded by

Copyright:

Available Formats

2017

Turning, Drilling, Threading,

_ SETTING NEW STANDARDS IN MACHINING

Perfection and precision are basic requirements for

Walter’s Engineering Kompetenz is demonstrated not only by our more than

Make exceeding standards

With Walter, you can achieve exceptional results without

Set new standards in your machining work – with innovations

Optimise processes with

With Walter solutions, you can benefit from comprehensive

This enables you to increase efficiency across all of your

The secret to all success is crystal-clear understanding. We analyse, understand and

For us, there is no such thing as a second-best solution. Only the

Benefits for all sectors – in terms of time and quality.

Achieve ambitious goals with ease.

LANDING GEAR MOUNTS

Wall finishing operation with the

Roughing operations (slot, corner, contour and

HPC pocket and base finishing using

Achieve powerful results.

Finishing the transition radius and

Roughing the blade root, turbine blade and blade head

Machining fir-tree grooves using a

You can find more information at www.walter-tools.com

We put you in motion.

Increasing environmental awareness constantly requires new technologies for automotive

TURBINE HOUSING WITH MANIFOLD

Finish machining of the

Finish machining of the

Finish machining of the cylinder main bore

You can find more information at www.walter-tools.com

Grow to meet your challenges.

RM5 turning insert

MC326 Supreme solid carbide cutter

TC142 Supreme tap

M4132 shoulder milling cutter

Multiply your success factors.

For maximum productivity and process reliability

Experienced point of contact for the entire process

Reconditioning to the original

50% LOWER COSTS

The catalogue consists of a total of four volumes, and is divided into:

The volumes of the Walter General Catalogue are clearly

Adaptors Additional information Additional information

Reconditioning ConeFit Open-ended spanners for External holders for

Subject to change without notice due to technical improvements.

A 3: Thread turning A 421

A 4: General information – Turning A 465

B – Drilling and Threading catalogue B 2 and B 706

Drilling B 1: Solid drilling B4

B 2: Counterboring and precision boring B 494

B 4: General information – Drilling B 695

Threading B 5: Tapping B 708

B 6: Thread forming B 1023

B 7: Thread milling B 1083

B 8: Threading dies B 1135

B 9: General information – Threading B 1143

C 1: Solid carbide, PCD and HSS milling tools C4

C 2: Milling tools with indexable inserts C 274