Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Philippine Agricultural Engineering Standard PAES 301: 2000

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

PHILIPPINE AGRICULTURAL ENGINEERING STANDARD PAES 301: 2000

Foreword

The formulation of this National Standard was initiated by the Agricultural Machinery
Testing and Evaluation Center (AMTEC) under the project entitled "Enhancing the
Implementation of AFMA Through Improved Agricultural Engineering Standards" which
was funded by the Bureau of Agricultural Research (BAR) of the Department of Agriculture
(DA).

This Standard was reviewed by the Technical Committee for Study 2 – Development of
Standards for Engineering Materials and was circulated to various private and government
agencies/organizations concerned for their comments and reactions. These standards were
presented to the Philippine Society of Agricultural Engineers (PSAE) and subjected to a
public hearing organized by the National Agriculture and Fisheries Council (NAFC). The
comments and reactions received during the presentation and public hearing were taken into
consideration in the finalization of the standards.

This Standard has been technically formulated in accordance with PNS 01:Part 4:1998–Rules
for the Structure and Drafting of Philippine National Standard. It provides specifications and
proper application of drives using V-belts and does not cover manufacturing specifications.

In the preparation of this standard, the following references were considered.

ASAE S211.4:1986, V-belt and V-ribbed belt drives for Agricultural Machines

Baumeister, Theodore (ed.) 1997. Mark’s handbook for mechanical engineers. 10th Edition.
Mc Graw Hill Book Company, USA.

Carmichael, C. (ed.) 1950. Kent’s Mechanical engineer’s handbook. Design and production
volume. 12th Edition. John Wiley and Sons, Inc., USA.

Faires, V. M. 1969. Design of Machine Elements. Macmillan Company, New York USA.

Horton, H. L. (Ed.) 1984. Machinery’s handbook. 23rd Edition. Industrial press inc, New
York.

Richey, C. B. (Ed.) 1961. Agricultural engineer’s handbook. Mc Graw Hill Book Company,
USA.

ISO 3410:1989, Agricultural Machinery – Endless variable-speed V-belts and groove


sections of corresponding pulleys

JIS B 1854:1987, Grooved pulleys for classical V-belts

Shigley, Joseph, E. 1977. Mechanical engineering design. 3rd Edition. Mc Graw Hill Book
Company, USA.

Mitsuboshi Design Manual


PHILIPPINE AGRICULTURAL ENGINEERING STANDARD PAES 301:2000
Engineering Materials – V-belts and Pulleys for Agricultural Machines – Specifications
and Applications

1 Scope

This Standard establishes specifications and provides technical information for the proper
application of V-belts and pulleys for drives of agricultural machinery.

2 Reference

The following normative references contains provisions which, through reference in this text,
constitute provisions of this Standard:

PAES 304:2000, Engineering Materials – Keys and Keyways for Agricultural Machines –
Specifications and Applications

3 Application

V-belt drives are commonly used for transmitting motion and power to shafts with short
center distances, and may be operated with small pulley diameters. In addition, a number of
V-belts may be used on a multi-grooved pulley, thus making a multiple-belt drive.

4 Definitions

4.1
V-belt
flexible machine element used to transmit motion and power between two shafts, the cross
section of which is shaped roughly like a regular trapezoid outlined by the base, sides and top
of the belt

4.2
V-pulley
wheel with one or more grooved rims used to transmit motion and power by means of one or
more V-belts

NOTE:
The cross section of the grooved rim is in the shape of an open-channel outlined by the base and the two slanted
sides.

4.3
V-belt drive
power transmission device, which consists of one or more V-belts, mounted on two or more
V-pulleys
PAES 301:2000

4.4
pulley diameter
the outside diameter of the pulley

4.5
pulley pitch diameter
the diameter of the pulley, which coincides with the belt pitch

4.6
belt pitch
the region in the belt that keeps the same length when the belt is bent perpendicularly to its
base

4.7
belt length
the length of the belt at the level of its pitch

4.8
speed ratio
ratio of the angular velocities of the pulleys making no allowance for slip and creep

4.9
belt speed
the linear speed of the belt at the level of the pulley pitch diameter

5 Belts

5.1 Nomenclature

Figure 1 shows the designation of dimensions of V-belts. Nominal dimensions of belt cross-
sections for agricultural machines are shown in Table 1.

bb

Pitch line
hb

40°

Where: bb is the top width of the belt


hb is the height of classical V-belt

Figure 1 –Designation of dimensions of V-belts

C-3
PAES 301:2000

5.2 V-belt specifications

Specifications of V-belts are given in Table 1.

Table 1 –Specifications of V-belts


Power range (one or more belts),
Type of Cross section bb, mm hb, mm
watts
A 13 8 186-1,457
B 16 10 746-18,642
C 22 13 11,186-74,570
D 32 19 37,285-186,425
E 38 25 74,570 and up
NOTE: Because of different constructions and methods of manufacture, the cross-sectional shape, dimensions
and included angle between the sidewalls may differ among manufacturers. However, all belts of a given cross-
section shall operate interchangeably in standard grooves of the same cross-section but belts of different
manufacturers should never be mixed on the same drive.

5.3 Materials

A V-belt is constructed of cords (cotton, rayon, synthetic, or steel) and fabric impregnated
with rubber

5.4 Marking

5.4.1 The following information shall be marked on the V-belt:

1) Type of cross section and pitch length


2) Manufacturer’s name, trademark

5.4.2 The following information shall be marked on the packaging:

1) Type of cross section and pitch length


2) Manufacturer’s name, trademark, and address

6 V-Pulleys

6.1 Nomenclature

V-pulleys can either be single-grooved or multi-grooved and the designation of their


dimensions are shown in Figure 2.

6.2 V-pulley specification

6.2.1 Minimum recommended pulley diameters are indicated in Table 2.

6.2.2 The recommended ratio, l/d shall be at least 1.5.

C-4
PAES 301:2000

bg Break Corners
Break Corners bg x

hg
hg
E

l l

Do

Do
D

D
d
d

Single-grooved Multi-grooved

Where bg is the top width of the pulley groove


D is the pulley pitch diameter
Do is the pulley outside diameter
d is the bore diameter
l is the hub length
hg is the height of the pulley groove
α is the groove angle
x is one-half the difference between the outside diameter and the pitch
diameter
Figure 2 – Types and designation of dimensions of V-pulleys

Table 2 – Specifications of V-pulleys


Pitch diameter
Pulley
Min. x, hg, α, bg,
cross Range E, mm d, mm l, mm
recommen- mm mm degrees mm
section (mm)
ded, mm
65 – 140 34 12.5 +1.8
A 65 3.2 12 9.5 12-21 25-40
Over 140 38 12.8 -0
115 – 180 34 16.2 +3.8
B 115 4.4 15 12.7 16-30 32-50
Over 180 38 16.5 -0
175 – 200 34 22.3 +3.8
C 175 201 – 305 5.1 20 36 22.5 17.5 30-54* 63-80*
Over 305 38 22.7 -0
300 – 330 34 32 +6.4
D 300 331 – 430 7.6 27 36 32.3 22.2
Over 430 38 32.6 -0
450 – 610 36 38.8 +6.4
E 450 10.2 33 28.6
Over 610 38 39.2 -0
* For 3 grooved V-pulleys.

6.3 Materials

V-pulleys are generally made of cast iron, cast steel, or pressed steel. The cast materials have
good friction and wear characteristics. Pulleys made of pressed steel are lighter than cast
pulleys, but in many instances they have lower friction and may produce excessive belt wear.

C-5
PAES 301:2000

6.4 Marking

6.4.1 The following information shall be marked on the pulley:

1) Type of cross section and pulley diameter


2) Manufacturer’s name and/or its trademark

6.4.2 The following information shall be marked on the packaging:

1) Type of cross section and pulley diameter


2) Manufacturer’s name, trademark and address

7 Recommended Design Practices

7.1 Pulley diameters

In designing belt drives, it should be recognized that the use of larger pulley diameters will
result in lower bearing loads and can result in the use of smaller and less expensive belt
cross-sections. Pulley diameters should conform to the minimum recommended values as
specified in Table 2.

7.2 Length calculations

7.2.1 The approximate belt length for a two-pulley drive (Fig. 3) may be calculated using
the formula

π
(DL + DS ) + (DL − DS )
2
L = 2C + …………..……………….….…….[Eq. 1]
2 4C
Where:
L = length of the belt (mm)
C = distance between centers of pulleys (mm)
DL = pitch diameter of the large pulley (mm)
DS = pitch diameter of the small pulley (mm)

If this calculation results in a length, which is not of standard length (for standard lengths see
Table 10), the next longer standard length should be used and necessary correction for center
distance should be made. The center distance can be calculated from the formula:

b + b 2 − 32(DL − DS )
2

C= ……………….……………...……………[Eq. 2]
16

Where:
b = 4 LS − 6.28(DL + DS )
Ls = standard belt length

7.2.2 To determine the belt length when more than two pulleys are used on a drive (Fig. 4),
lay out the pulleys in terms of their pitch diameters to scale in the position desired when a
new belt is applied and first brought to driving tension. The length of the belt shall be the

C-6
PAES 301:2000

sum of the tangents (T) and the connecting arcs around the diameters of the pulleys. The
length of the connecting arcs can be calculated by the formula:

D× A
Length of arc = ……….…………………………………….…...[Eq. 3]
115
Where:
D = the diameter of the pulley
A = the angle in degrees subtended by the arc of belt contact on the pulley

A
D

Fig. 3 – V-belt drive with two Fig 4 – V-belt drive with more than
pulleys two pulleys
7.3 Selection

7.3.1 Selection of a V-belt should be based on nature of the load, type of driving unit,
horsepower rating, size of pulleys, and speeds of driving and driven units. Figure 5 serves as
an aid in the proper selection of v-belts. Tables 3–7 indicate the power transmitted by one
belt with velocity and size of pulley as determining factors in the power transmitted.

7.3.2 Since V-belts are used on different machines, service factors (indicated in Table 8)
should be used to correct for loading. To obtain the horsepower capacity of the drive,
multiply the rated horsepower (name plate rating) of the driving unit by the recommended
service factor.

7.4 Correction for arc of contact

Correction for arc of contact for small pulley is determined from Table 9, the arc being given
by the approximate formula:
60(DL − DS )
Arc of contact = 180 − ……...………………………………………...[4]
C
Where:
DL = diameter of the large pulley
DS = diameter of the small pulley
C = center distance of drive.

C-7
C-8
RPM of Small Pulley
PAES 301:2000

200
300
400
500
600
700
800

100
1,000
1,200
1,500
2,000
2,500
3,000
3,500
4,000
5,000

746

1,491

2,237

2,983

3,729

4,474
A

5,220
5,966
6,711
7,457
B

Figure 5 – Design
14,914
C

Belt selection
22,371

Power, watts
chart
29,828

37,285
D

44,742
52,199
E

59,656
67,113
74,570

149,140

223,710

298,280

372,850
PAES 301:2000
Table 3 - Power ratings for section A V-belt
Rpm of Pitch diameter of small pulley, mm Additional power per belt for speed ratio, watts
Small 1- 1.02- 1.05- 1.09- 1.13- 1.19- 1.25- 1.35- 1.52- 2 and
pulley 67 70 75 80 85 90 95 100 105 11 115 120 125 130 140 150 160 175
1.01 1.04 1.08 1.12 1.18 1.24 1.35 1.51 1.99 over
200 149 172 194 216 246 268 291 313 336 358 380 410 433 455 500 544 589 656 0 0 7 7 7 15 15 22 22 22
400 254 298 343 388 433 477 522 567 611 656 694 738 783 828 910 992 1,081 1,201 0 7 7 15 22 30 30 37 45 45
600 343 410 477 537 604 671 731 798 858 917 984 1,096 1,104 1,171 1,290 1,409 1,536 1,715 0 7 15 22 30 37 45 60 67 75
800 425 507 597 679 761 843 925 1,007 1,089 1,171 1,253 1,335 1,409 1,491 1,648 1,805 1,961 2,192 0 7 22 30 45 52 67 75 89 97
1,000 500 604 708 805 910 1,014 1,111 1,215 1,312 1,409 1,506 1,603 1,700 1,797 1,991 2,177 2,364 2,640 0 15 30 37 52 67 82 97 104 119
1,160 552 671 790 910 1,022 1,141 1,253 1,365 1,476 1,588 1,700 1,812 1,924 2,036 2,245 2,461 2,670 2,975 0 15 30 45 60 75 97 112 127 142
1,200 567 694 813 932 1,051 1,171 1,290 1,402 1,521 1,633 1,752 1,864 1,976 2,088 2,312 2,528 2,744 3,065 0 15 30 45 67 82 97 112 127 142
1,400 634 776 910 1,051 1,186 1,320 1,454 1,588 1,723 1,849 1,984 2,110 2,237 2,364 2,617 2,863 3,102 3,453 0 22 37 60 75 97 112 134 149 172
1,600 694 850 1,007 1,156 1,312 1,462 1,611 1,760 1,909 2,058 2,200 2,341 2,483 2,625 2,901 3,169 3,438 3,818 0 22 45 67 89 104 127 149 172 194
1,750 731 902 1,074 1,238 1,402 1,566 1,730 1,887 2,043 2,200 2,356 2,513 2,662 2,811 3,102 3,393 3,669 4,072 0 22 45 67 97 119 142 164 186 209
1,800 746 917 1,096 1,260 1,432 1,603 1,767 1,931 2,088 2,252 2,409 2,565 2,722 2,871 3,169 3,460 3,743 4,154 0 22 45 75 97 119 142 172 194 216
2,000 798 992 1,178 1,365 1,544 1,730 1,909 2,088 2,259 2,431 2,602 2,774 2,938 3,102 3,423 3,729 4,027 4,452 0 30 52 82 104 134 164 186 216 239
2,200 843 1,051 1,253 1,454 1,655 1,849 2,043 2,230 2,424 2,602 2,789 2,968 3,139 3,311 3,646 3,975 4,280 4,720 0 30 60 89 119 149 179 209 239 268
2,400 887 1,111 1,327 1,544 1,752 1,961 2,170 2,371 2,573 2,767 2,960 3,147 3,326 3,512 3,855 4,191 4,504 4,944 0 30 67 97 127 164 194 224 261 291
2,600 925 1,163 1,394 1,626 1,849 2,073 2,289 2,498 2,707 2,916 3,117 3,311 3,497 3,684 4,042 4,385 4,698 5,130 0 37 67 104 142 172 209 246 276 313
2,800 962 1,215 1,462 1,700 1,939 2,170 2,394 2,617 2,834 3,050 3,259 3,460 3,654 3,848 4,206 4,549 4,862 5,272 0 37 75 112 149 186 224 261 298 336
3,000 999 1,260 1,521 1,775 2,021 2,259 2,498 2,729 2,953 3,169 3,385 3,594 3,788 3,982 4,347 4,683 4,981 5,369 0 37 82 119 164 201 239 283 321 365
3,200 1,022 1,298 1,573 1,834 2,095 2,341 2,588 2,826 3,057 3,281 3,497 3,706 3,907 4,101 4,459 4,780 5,071 5,421 0 45 89 127 172 216 261 298 343 388
3,400 1,051 1,335 1,618 1,894 2,163 2,416 2,670 2,916 3,147 3,378 3,594 3,803 4,004 4,176 4,541 4,847 5,116 5,421 0 45 89 134 179 231 276 321 365 410
3,450 1,051 1,342 1,633 1,909 2,177 2,438 2,692 2,938 3,169 3,400 3,617 3,825 4,027 4,213 4,564 4,862 5,116 5,406 0 45 89 142 186 231 276 321 373 418
3,600 1,074 1,372 1,663 1,946 2,222 2,483 2,744 2,990 3,229 3,460 3,676 3,885 4,079 4,265 4,601 4,884 5,116 0 45 97 142 194 239 291 336 388 433
3,800 1,089 1,394 1,700 1,991 2,267 2,543 2,804 3,057 3,296 3,520 3,736 3,945 4,131 4,310 4,623 4,884 5,078 0 52 104 157 201 254 306 358 410 462
4,000 1,096 1,417 1,730 2,028 2,312 2,588 2,856 3,110 3,348 3,572 3,781 3,982 4,161 4,333 4,623 4,840 0 52 104 164 216 268 321 373 433 485
4,200 1,111 1,439 1,752 2,058 2,349 2,625 2,893 3,147 3,385 3,609 3,811 3,997 4,168 4,325 4,579 0 60 104 172 224 283 336 395 447 507
4,400 1,111 1,447 1,775 2,081 2,379 2,655 2,923 3,169 3,400 3,617 3,818 3,997 4,154 4,295 4,511 0 60 119 179 239 298 358 410 470 529
4,600 1,111 1,454 1,782 2,095 2,394 2,677 2,938 3,184 3,408 3,617 3,803 3,967 4,109 4,228 0 60 127 186 246 306 373 433 492 559
4,800 1,111 1,454 1,790 2,103 2,401 2,685 2,938 3,184 3,400 3,594 3,766 3,915 4,042 0 67 127 194 261 321 388 447 515 582
5,000 1,096 1,454 1,790 2,103 2,401 2,677 2,931 3,162 3,371 3,557 3,714 3,840 0 67 134 201 268 336 403 470 537 604
5,200 1,081 1,447 1,782 2,095 2,394 2,662 2,908 3,132 3,326 3,490 3,632 0 67 142 209 276 350 418 492 559 626
5,400 1,066 1,424 1,767 2,081 2,371 2,640 2,871 3,080 3,266 3,415 0 75 142 216 291 365 433 507 582 649
5,600 1,044 1,409 1,745 2,058 2,341 2,595 2,826 3,020 3,184 3,311 0 75 149 224 298 373 447 529 604 679
5,800 1,014 1,380 1,715 2,021 2,304 2,550 2,759 2,938 3,080 0 75 157 231 313 388 470 544 626 701
6,000 977 1,342 1,678 1,976 2,252 2,483 2,677 2,841 0 82 164 239 321 403 485 567 641 723
6,200 940 1,305 1,633 1,924 2,185 2,409 2,588 2,722 0 82 164 246 336 418 500 582 664 746
6,400 895 1,253 1,581 1,864 2,110 2,312 2,476 0 89 172 261 343 433 515 604 686 776
6,600 850 1,201 1,521 1,790 2,028 2,207 0 89 179 268 358 440 529 619 708 798
6,800 790 1,141 1,447 1,708 1,924 2,095 0 89 186 276 365 455 544 641 731 820
7,000 731 1,074 1,372 1,618 1,812 0 97 186 283 373 470 567 656 753 843
7,200 664 999 1,283 1,514 1,693 0 97 194 291 388 485 582 679 776 872
7,400 589 917 1,186 1,402 0 97 201 298 395 500 597 694 798 895
7,600 507 820 1,081 1,275 0 104 201 306 395 507 611 716 813 917

C-9
PAES 301:2000
Table 4 - Power ratings for section B V-belt
Rpm of Pitch diameter of small pulley (mm) Additional power per belt for speed ratio, watts
small 1- 1.02- 1.05- 1.09- 1.13- 1.19- 1.25- 1.35- 1.52- 2 and
115 120 125 130 135 140 145 150 155 160 165 170 175 185 190 200 220 240
pulley 1.01 1.04 1.08 1.12 1.18 1.24 1.34 1.51 1.99 over
200 507 544 589 626 671 708 746 790 828 865 910 947 984 1,066 1,104 1,178 1,298 1,447 0 7 15 22 30 37 45 52 60 60
870 1,626 1,782 1,931 2,081 2,230 2,379 2,528 2,677 2,826 2,968 5,354 3,259 3,408 3,691 3,833 4,116 4,534 5,078 0 30 60 89 119 157 186 216 246 276
400 8,87 962 1,037 1,111 1,193 1,268 1,342 1,417 1,491 1,566 1,633 1,708 1,782 1,931 1,998 2,148 2,364 2,647 0 15 30 45 60 67 82 97 112 127
600 1,223 1,335 1,439 1,551 1,655 1,767 1,872 1,984 2,088 2,192 2,297 2,401 2,506 2,714 2,819 3,028 3,333 3,743 0 22 45 60 82 104 127 149 172 186
800 1,529 1,670 1,812 1,946 2,088 2,230 2,364 2,506 2,640 2,774 2,916 3,050 3,184 3,445 3,579 3,840 4,236 4,743 0 30 60 82 112 142 172 194 224 254
1,000 1,805 1,976 2,148 2,319 2,491 2,655 2,826 2,990 3,154 3,318 3,482 3,646 3,803 4,124 4,280 4,601 5,063 5,667 0 37 67 104 142 179 209 246 283 313
1,160 2,013 2,207 2,401 2,595 2,789 2,975 3,169 3,356 3,542 3,721 3,907 4,086 4,273 4,631 4,802 5,153 5,667 6,338 0 37 82 119 164 201 246 283 328 365
1,200 2,066 2,267 2,468 2,662 2,856 3,057 3,251 3,438 3,632 3,825 4,012 4,198 4,385 4,750 4,929 5,287 5,816 6,495 0 45 82 127 172 209 254 298 336 380
1,400 2,304 2,528 2,759 2,983 3,199 3,423 3,639 3,855 4,072 4,288 4,497 4,705 4,914 5,317 5,518 5,913 6,488 7,226 0 52 97 149 194 246 298 343 395 440
1,750 2,670 2,938 3,207 3,475 3,736 3,989 4,250 4,497 4,750 4,996 5,235 5,473 5,712 6,174 6,398 6,831 7,457 8,277 0 60 127 186 246 306 373 433 492 552
1,600 2,520 2,774 3,020 3,274 3,520 3,758 3,997 4,236 4,474 4,705 4,937 5,160 5,391 5,831 6,048 6,465 7,077 7,830 0 60 112 172 224 283 336 395 447 507
1,800 2,714 2,990 3,266 3,535 3,803 4,064 4,325 4,586 4,832 5,086 5,332 5,570 5,809 6,279 6,503 6,942 7,606 8,352 0 60 127 186 254 313 380 440 507 567
2,000 2,893 3,192 3,482 3,773 4,057 4,340 4,616 4,884 5,153 5,421 5,675 5,928 6,174 6,659 6,890 7,345 7,979 8,725 0 67 142 209 283 350 425 492 567 634
2,200 3,042 3,363 3,676 3,982 4,280 4,579 4,869 5,153 5,429 5,705 5,966 6,227 6,480 6,972 7,203 7,681 8,277 8,948 0 75 157 231 313 388 462 544 619 694
2,400 3,177 3,512 3,840 4,161 4,474 4,780 5,078 5,369 5,660 5,936 6,204 6,465 6,719 7,203 7,435 7,830 8,426 9,098 0 82 172 254 336 425 507 589 679 761
2,600 3,289 3,632 3,975 4,303 4,631 4,944 5,250 5,548 5,831 6,115 6,383 6,637 6,890 7,360 7,606 7,979 8,501 9,023 0 89 186 276 365 455 552 641 731 820
2,800 3,371 3,729 4,079 4,415 4,750 5,063 5,376 5,667 5,958 6,234 6,495 6,749 6,980 7,420 7,606 7,979 8,426 0 97 194 298 395 492 589 686 7502 887
3,000 3,430 3,796 4,154 4,497 4,825 5,145 5,451 5,742 6,025 6,286 6,540 6,778 7,002 7,397 7,606 7,904 0 104 209 313 425 529 634 738 843 947
3,200 3,460 3,833 4,191 4,534 4,869 5,183 5,481 5,764 6,033 6,286 6,517 6,734 6,928 7,271 7,412 0 112 224 336 447 567 679 790 902 1,014
3,400 3,468 3,840 4,198 4,541 4,862 5,168 5,459 5,727 5,981 6,204 6,420 6,607 6,771 0 119 239 358 477 597 716 835 954 1,074
3,600 3,445 3,818 4,168 4,504 4,817 5,108 5,384 5,630 5,854 6,063 6,242 6,391 0 127 254 380 507 634 761 887 1,014 1141
3,800 3,393 3,758 4,101 4,422 4,720 4,996 5,250 5,473 5,667 5,839 0 134 268 403 537 671 805 940 1,066 1,201
4,000 3,311 3,669 3,997 4,303 4,579 4,832 5,056 5,242 5,406 0 142 283 425 567 701 843 984 1,126 1,268
4,200 3,192 3,535 3,848 4,131 4,385 4,608 4,795 0 149 298 440 589 738 887 1,037 1,186 1,327
4,400 3,042 3,371 3,661 3,915 4,139 4,325 0 157 313 462 619 776 932 1,081 1,238 1,394
4,600 2,856 3,162 3,423 3,654 0 164 321 485 649 813 969 1,133 1,298 1,454
4,800 2,632 2,908 3,147 0 172 336 507 679 843 1,014 1,186 1,350 1,521
5,000 2,379 2,617 0 179 350 529 701 880 1,059 1,230 1,409 1,581

C-10
PAES 301:2000
Table 5 - Power ratings for section C V-belt
Rpm of Pitch diameter of small pulley (mm) Additional power per belt for speed ratio, watts
Small 1- 1.02- 1.05- 1.09- 1.13- 1.19- 1.25- 1.35- 1.52- 2 and
pulley 175 190 200 215 230 240 255 265 280 290 305 315 330 355 405
1.01 1.04 1.08 1.12 1.18 1.24 1.35 1.51 1.99 over
100 761 858 954 1,051 1,148 1,238 1,335 1,424 1,521 1,611 1,708 1,797 1,887 2,073 2,431 0 7 22 30 37 52 60 67 82 89
200 1,342 1,521 1,708 1,887 2,058 2,237 2,416 2,588 2,767 2,938 3,110 3,281 3,453 3,796 4,474 0 22 37 60 82 97 119 134 157 179
300 1,857 2,125 2,379 2,640 2,893 3,154 3,408 3,654 3,907 4,161 4,407 4,653 4,899 5,391 6,353 0 30 60 89 119 149 179 209 239 261
400 2,334 2,677 3,013 3,348 3,676 4,004 4,333 4,661 4,981 5,302 5,623 5,943 6,256 6,883 8,128 0 37 82 119 157 194 231 276 313 350
500 2,781 3,192 3,602 4,012 4,415 4,810 5,212 5,608 5,995 6,383 6,771 7,151 7,532 8,277 9,769 0 52 97 149 194 246 291 343 395 440
600 3,199 3,684 4,161 4,638 5,108 5,578 6,040 6,503 6,957 7,405 7,830 8,277 8,725 9,620 11,260 0 60 119 179 239 291 350 410 470 529
700 3,594 4,146 4,690 5,235 5,772 6,301 6,831 7,353 7,830 8,352 8,874 9,396 9,843 10,813 12,677 0 67 134 209 276 343 410 477 552 619
800 3,960 4,579 5,198 5,802 6,398 6,987 7,606 8,128 8,725 9,247 9,843 10,365 10,887 12,006 14,019 0 82 157 231 313 395 470 544 626 708
870 4,213 4,869 5,526 6,174 6,816 7,442 8,054 8,650 9,247 9,843 10,440 14,019 11,633 12,751 14,839 0 82 172 254 343 425 515 597 679 768
900 4,310 4,996 5,667 6,331 6,987 7,606 8,277 8,874 9,545 10,142 10,738 11,335 11,931 13,050 15,138 0 89 179 261 350 440 529 619 708 790
1,000 4,638 5,384 6,115 6,831 7,532 8,203 8,948 9,620 10,291 10,887 11,558 12,155 12,751 13,945 16,182 0 97 194 291 395 492 589 686 783 880
1,100 4,944 5,742 6,532 7,300 8,054 8,799 9,545 10,216 10,962 11,633 12,304 12,975 13,572 14,765 17,002 0 104 216 321 433 537 649 8210 865 969
1,160 5,116 5,951 6,763 7,532 8,352 9,098 9,843 10,589 11,335 12,006 12,677 13,348 14,019 15,212 17,449 0 112 224 418 455 567 679 798 910 1,022
1,200 5,227 6,085 6,920 7,755 8,501 9,321 10,067 10,813 11,558 12,304 12,975 13,646 14,243 15,511 17,673 0 119 239 350 470 589 701 820 940 1,059
1,300 5,488 6,391 7,278 8,128 8,948 9,769 10,589 11,335 12,155 12,826 13,572 14,243 14,839 16,107 18,195 0 127 254 380 507 634 761 887 1,022 1,148
1,400 5,734 6,681 7,606 8,501 9,396 10,216 11,036 11,857 12,602 13,348 14,019 14,690 15,361 16,555 18,493 0 134 276 410 552 686 820 962 1,096 1,230
1,500 5,951 6,935 7,904 8,799 9,769 10,589 11,409 12,229 13,050 13,721 14,467 15,138 15,734 16,853 18,568 0 149 291 440 589 731 880 1,029 1,178 1,320
1,600 6,145 7,166 8,128 9,098 9,769 10,962 11,782 12,602 13,348 14,094 14,765 15,436 15,958 17,002 0 157 313 470 626 783 940 1,096 1,253 1,409
1,700 6,309 7,368 8,426 9,396 10,067 11,186 12,080 12,826 13,646 14,317 14,989 15,585 16,107 17,002 0 164 336 500 664 835 999 1,163 1,335 1,499
1,750 6,391 7,457 8,501 9,470 10,440 11,335 12,155 12,975 13,721 14,392 15,063 15,585 16,107 17,002 0 172 343 515 686 858 1,029 1,201 1,372 1,544
1,800 6,458 7,532 8,576 9,545 10,291 11,409 12,229 13,050 13,795 14,467 15,063 15,585 16,107 0 179 350 529 708 880 1,059 1,230 1,409 1,588
1,900 6,577 7,681 8,725 9,769 10,514 11,558 12,379 13,199 13,870 14,467 15,063 15,511 15,958 0 186 373 559 746 932 1,119 1,305 1,491 1,670
2,000 6,667 7,755 8,874 9,843 10,664 11,707 12,453 13,199 13,870 14,467 14,914 0 194 395 589 783 977 1,171 1,372 1,566 1,760
2,100 6,734 7,904 8,948 9,918 10,813 11,707 12,453 13,199 13,795 14,243 0 209 410 619 820 1,029 1,230 1,439 1,648 1,849
2,200 6,763 7,904 8,948 9,992 10,887 11,707 12,379 13,050 13,572 0 216 433 649 865 1,074 1,290 1,506 1,723 1,939
2,300 6,771 7,904 8,948 9,918 10,887 11,558 12,229 12,826 0 224 447 679 902 1,126 1,350 1,573 1,805 2,028
2,400 6,749 7,904 8,948 9,843 10,664 11,409 12,006 0 239 470 701 940 1,178 1,409 1,641 1,879 2,118
2,500 6,696 7,830 8,799 9,769 10,514 11,186 0 246 492 731 977 1,223 1,469 1,715 1,961 2,200
2,600 6,607 7,681 8,725 9,545 10,291 10,813 0 254 507 761 1,022 1,275 1,529 1,782 2,036 2,289
2,700 6,488 7,532 8,501 9,321 9,918 0 261 529 790 1,059 1,320 1,588 1,849 2,118 2,379
2,800 6,331 7,375 8,277 9,023 0 276 552 820 1,096 1,372 1,641 1,916 2,192 2,468
2,900 6,137 7,144 7,979 8,650 0 283 567 850 1,133 1,417 1,700 1,984 2,274 2,558
3,000 5,913 6,860 7,606 0 291 589 880 1,178 1,469 1,760 2,058 2,349 2,640
3,100 5,652 6,540 7,233 0 306 604 910 1,215 1,514 1,820 2,125 2,431 2,729
3,200 5,347 6,174 0 313 626 940 1,253 1,566 1,879 2,192 2,506 2,819
3,300 5,004 5,757 0 321 649 969 1,290 1,618 1,939 2,259 2,588 2,908
3,400 4,623 0 336 664 999 1,335 1,663 1,998 2,327 2,662 2,998

C-11
PAES 301:2000
Table 6 - Power ratings for section D V-belt
Rpm Pitch diameter of small pulley (mm) Additional power per belt for speed ratio, watts
of
Small 305 315 330 340 355 370 380 395 405 430 455 480 510 535 560 585 610 1.02- 1.05- 1.09- 1.13- 1.19- 1.25- 1.35- 1.52- 2 and
pulley 1 -1.01 1.04 1.08 1.12 1.18 1.24 1.35 1.51 1.99 over
50 1,476 1,581 1,685 1,790 1,894 1,998 2,103 2,200 2,304 2,513 2,714 2,916 3,117 3,318 3,512 3,714 3,907 0 15 37 52 67 89 104 119 142 157
100 2,617 2,811 3,013 3,207 3,400 3,594 3,788 3,982 4,168 4,556 4,937 5,317 5,690 6,063 6,435 6,808 7,181 0 37 67 104 142 172 209 246 276 313
150 3,639 3,922 4,206 4,489 4,772 5,048 5,332 5,608 5,884 6,435 6,987 7,532 8,054 8,576 9,172 9,694 10,216 0 52 104 157 209 261 313 262 418 470
200 4,594 4,959 5,324 5,690 6,055 6,420 6,778 7,136 7,532 8,203 8,948 9,620 10,291 11,036 11,707 12,379 13,050 0 67 142 209 276 350 418 485 552 626
250 5,488 5,936 6,383 6,831 7,271 7,681 8,128 8,576 9,023 9,918 10,738 11,633 12,453 13,348 14,168 14,989 15,809 0 89 172 261 350 433 522 604 694 783
300 6,331 6,860 7,390 7,904 8,426 8,948 9,470 9,992 10,514 11,484 12,528 13,497 14,541 15,511 16,480 17,449 18,419 0 104 209 313 418 522 626 789 835 940
350 7,136 7,755 8,352 8,948 9,545 10,142 10,738 11,335 11,931 13,050 14,168 15,361 16,480 17,599 18,717 19,761 20,880 0 119 246 365 485 604 731 850 969 1,096
400 7,904 8,576 9,247 9,918 10,589 11,260 11,931 12,602 13,199 14,541 15,809 17,077 18,344 19,537 20,805 21,998 23,191 0 142 276 418 559 694 835 969 1,111 1,253
450 8,650 9,396 10,142 10,887 11,633 12,379 13,050 13,795 14,541 15,958 17,375 18,717 20,134 21,476 22,744 24,086 25,354 0 157 313 470 626 783 940 1,096 1,253 1,409
500 9,321 10,142 10,962 11,782 12,602 13,348 14,168 14,989 15,734 17,300 18,792 20,283 21,774 23,191 24,683 26,025 27,442 0 172 350 522 694 865 1,044 1,215 1,387 1,566
550 9,992 10,887 11,782 12,677 13,497 14,392 15,212 16,033 16,927 18,568 20,208 21,774 23,340 24,906 26,398 27,889 29,306 0 194 380 574 761 954 1,148 1,335 1,529 1,715
600 10,664 11,558 12,528 13,497 14,392 15,287 16,182 17,151 18,046 19,761 21,476 23,191 24,832 26,472 28,038 29,530 31,021 0 209 418 626 835 1,044 1,253 1,462 1,663 1,872
650 11,260 12,229 13,273 14,243 15,212 16,182 17,151 18,121 19,090 20,880 22,744 24,459 26,174 27,889 29,530 31,096 32,587 0 224 455 679 902 1,126 1,357 1,581 1,805 2,028
690 11,707 12,751 13,795 14,839 15,883 16,853 17,897 18,866 19,836 21,774 23,639 25,428 27,218 28,933 30,574 32,214 33,706 0 239 477 716 962 1,201 1,439 1,678 1,916 2,155
700 11,782 12,901 13,945 14,989 16,033 17,002 18,046 19,015 20,059 21,998 23,862 25,652 27,442 29,157 30,872 32,438 34,004 0 246 485 731 969 1,215 1,462 1,700 1,946 2,185
750 12,304 13,423 14,541 15,660 16,778 17,822 18,866 19,910 20,954 22,968 24,906 26,771 28,635 30,350 32,065 33,631 35,197 0 261 522 783 1,044 1,305 1,559 1,820 2,081 2,341
800 12,826 14,019 15,138 16,331 17,449 18,568 19,686 20,730 21,774 23,862 25,876 27,815 29,604 31,394 33,109 34,675 36,166 0 276 559 835 1,111 1,387 1,663 1,946 2,222 2,498
850 13,273 14,541 15,734 16,927 18,121 19,239 20,358 21,476 22,595 24,683 26,696 28,709 30,499 32,289 33,929 35,495 36,987 0 298 589 887 1,178 1,476 1,767 2,066 2,364 2,655
870 13,497 14,690 15,958 17,151 18,344 19,463 20,656 21,774 22,893 24,981 27,069 29,008 30,872 32,587 34,228 35,794 37,210 0 306 604 902 1,208 1,551 1,812 2,110 2,416 2,722
900 13,721 14,989 16,256 17,449 18,643 19,836 21,029 22,147 23,266 25,428 27,516 29,455 31,319 33,035 34,675 36,166 37,509 0 313 626 940 1,253 1,566 1,872 2,185 2,498 2,811
950 14,094 15,436 16,704 17,971 19,239 20,432 21,625 22,744 23,937 26,100 28,187 30,126 31,916 33,631 35,197 36,614 37,882 0 328 664 992 1,320 1,648 1,976 2,312 2,640 2,968
1,000 14,467 15,809 17,151 18,419 19,686 20,954 22,147 23,340 24,459 26,621 28,709 30,648 32,438 34,004 35,495 36,838 37,956 0 350 694 1,044 1,387 1,737 2,081 2,431 2,774 3,124
1,050 14,765 16,182 17,524 18,866 20,134 21,402 22,595 23,788 24,906 27,143 29,157 31,021 32,736 34,302 35,644 36,838 0 365 731 1,096 1,462 1,820 2,185 2,550 2,916 3,281
1,100 15,063 16,480 17,822 19,164 20,507 21,774 22,968 24,161 25,279 27,442 29,455 31,319 32,885 34,377 35,570 0 380 768 1,148 1,529 1,909 2,289 2,670 3,057 3,438
1,150 15,287 16,778 18,121 19,463 20,805 22,073 23,266 24,459 25,578 27,740 29,679 31,394 32,960 34,228 0 403 798 1,201 1,596 1,998 2,394 2,796 3,192 3,594
1,160 15,361 16,778 18,195 19,537 20,880 22,147 23,340 24,534 25,652 27,815 29,679 31,394 32,885 34,153 0 403 805 1,208 1,611 2,013 2,416 2,819 3,221 3,624
1,200 15,511 16,927 18,344 19,761 21,029 22,296 23,564 24,683 25,801 27,889 29,753 31,394 32,811 0 418 835 1,253 1,670 2,081 2,498 2,916 3,333 3,751
1,250 15,660 17,151 18,568 19,910 21,252 22,446 23,713 24,832 25,950 27,964 29,679 31,245 0 433 872 1,298 1,737 2,170 2,602 3,035 3,475 3,907
1,300 15,809 17,226 18,643 20,059 21,327 22,595 23,788 24,906 25,950 27,889 29,530 30,872 0 455 902 1,350 1,805 2,259 2,707 3,162 3,609 4,064
1,350 15,809 17,300 18,717 20,059 21,402 22,595 23,788 24,832 25,876 27,665 29,231 0 470 940 1,402 1,872 2,341 2,811 3,281 3,751 4,221
1,400 15,883 17,375 18,717 20,059 21,327 22,520 23,713 24,757 25,727 27,367 0 485 977 1,454 1,946 2,431 2,916 3,400 3,885 4,377
1,450 15,809 17,300 18,717 19,985 21,252 22,446 23,490 24,534 25,428 26,920 0 507 1,007 1,506 2,013 2,520 3,020 3,520 4,027 4,534
1,500 15,734 17,226 18,568 19,910 21,103 22,222 23,266 24,161 24,981 0 522 1,044 1,559 2,081 2,602 3,124 3,646 4,168 4,690
1,550 15,660 17,077 18,419 19,686 20,805 21,924 22,893 23,713 24,534 0 537 1,081 1,611 2,155 2,692 3,229 3,766 4,303 4,847
1,600 15,436 16,853 18,195 19,388 20,507 21,551 22,446 23,191 0 559 1,111 1,663 2,222 2,781 3,333 3,885 4,444 4,996
1,650 15,212 16,629 17,897 19,090 20,134 21,029 21,849 0 574 1,148 1,715 2,289 2,863 3,438 4,012 4,586 5,153
1,700 14,989 16,331 17,524 18,643 19,612 20,507 0 589 1,178 1,767 2,364 2,953 3,542 4,131 4,720 5,309
1,750 14,616 15,883 17,077 18,121 19,015 0 611 1,215 1,820 2,431 3,035 3,646 4,250 4,862 5,466
1,800 14,243 15,436 16,555 17,524 0 626 1,253 1,872 2,498 3,124 3,751 4,377 4,996 5,623
1,850 13,795 14,989 16,033 0 641 1,283 1,924 2,573 3,214 3,855 4,497 5,138 5,779
1,900 13,273 14,392 15,361 0 656 1,320 1,976 2,640 3,296 3,960 4,616 5,280 5,936
1,950 12,677 13,721 0 679 1,357 2,028 2,707 3,385 4,064 4,735 5,414 6,092
2,000 12,080 0 694 1,387 2,081 2,781 3,475 4,168 4,862 5,555 6,249

C-12
PAES 301:2000
Table 7 - Power ratings for section E V-belt
Rpm of Pitch diameter of small pulley (mm) Additional power per belt for speed ratio, watts
Small 1 - 1.02- 1.05- 1.09- 1.13- 1.19- 1.25- 1.35- 1.52- 2 and
455 480 510 535 560 585 610 635 660 685 710 735 760 785 810 865 915
pulley 1.01 1.04 1.08 1.12 1.18 1.24 1.35 1.51 1.99 over
50 3,385 3,684 3,975 4,273 4,564 4,855 5,138 5,429 5,712 6,003 6,286 6,570 6,853 7,136 7,412 7,979 1,044 0 30 67 97 134 164 201 231 268 298
100 6,063 6,614 7,166 7,681 8,277 8,799 31,692 9,918 10,440 10,962 11,484 12,006 12,528 13,050 13,572 14,616 15,660 0 67 134 201 268 328 395 462 529 597
150 8,501 9,247 10,067 10,887 11,633 12,453 13,199 13,945 14,765 15,511 16,256 17,002 17,822 18,568 19,314 20,805 22,222 0 97 201 298 395 500 597 694 798 895
200 10,738 11,782 12,751 13,795 14,839 23,266 16,853 17,822 18,792 19,761 20,730 21,700 22,669 23,639 24,608 26,547 28,411 0 134 268 395 529 664 798 925 1,059 1,193
250 12,826 14,094 15,361 16,555 17,822 19,015 20,208 21,402 22,595 23,788 24,981 26,174 27,293 28,486 22,147 31,841 34,078 0 164 336 500 664 828 992 1,163 1,327 1,491
300 14,839 16,331 17,748 19,164 20,656 22,073 23,415 24,832 26,249 27,591 28,933 30,275 31,618 32,960 34,228 36,838 39,373 0 201 395 597 798 992 1,193 1,394 1,588 1,790
350 16,704 18,419 20,059 21,700 23,266 24,906 26,472 28,038 29,604 31,096 32,662 34,153 35,644 37,061 38,553 41,386 44,145 0 231 462 694 932 1,163 1,394 1,626 1,857 2,088
400 18,493 20,358 22,147 24,012 25,801 27,516 29,306 31,021 32,736 34,377 36,092 37,658 39,298 40,864 42,430 45,488 48,396 0 268 529 798 1,059 1,327 1,588 1,857 2,125 2,386
435 19,686 29,082 23,639 25,503 27,442 29,306 31,170 32,960 19,836 36,539 38,254 39,970 41,685 43,325 44,966 48,098 51,080 0 291 574 865 1,156 1,439 1,730 2,021 2,312 2,595
450 20,134 22,222 24,235 26,174 28,113 30,052 31,916 33,780 35,644 37,434 39,224 40,939 42,654 44,295 45,935 49,142 52,124 0 298 597 895 1,193 1,491 1,790 2,088 2,386 2,685
500 21,700 23,937 26,100 28,187 30,275 32,363 34,377 36,316 38,254 40,193 41,983 43,847 45,562 47,352 48,992 0 328 664 992 1,327 1,655 1,991 2,319 2,655 2,983
550 23,191 25,503 27,815 30,052 32,289 34,451 36,539 38,627 40,641 42,579 44,518 46,383 48,172 49,887 51,602 54,809 57,717 0 365 731 1,096 1,462 1,827 2,185 2,550 2,916 3,281
575 23,862 26,249 28,635 30,947 33,184 35,421 37,583 39,671 41,685 43,698 45,637 47,501 49,291 51,006 52,721 55,853 58,761 0 380 761 1,133 1,529 1,909 2,289 2,670 3,050 3,430
600 24,534 26,994 29,381 31,767 34,078 36,316 38,553 40,641 42,729 44,742 46,681 48,545 50,335 52,050 53,690 56,748 59,507 0 395 798 1,193 1,588 1,991 2,386 2,781 3,184 3,579
650 25,727 28,337 30,872 33,333 35,719 38,031 40,268 42,430 44,518 46,532 48,396 50,260 52,050 53,690 55,256 58,090 60,551 0 433 865 1,290 1,723 2,155 2,588 3,020 3,445 3,878
690 26,621 29,306 31,916 34,377 36,838 39,149 41,461 43,623 45,711 47,650 49,589 51,379 53,019 54,660 56,077 58,687 0 455 917 1,372 1,834 2,289 2,744 3,207 3,661 4,116
700 26,845 29,530 32,140 34,675 37,061 39,448 41,685 43,847 45,935 47,949 49,813 51,602 53,243 54,809 56,226 58,761 0 462 932 1,394 1,857 2,319 2,781 3,251 3,714 4,176
750 27,815 30,574 33,258 35,794 38,254 40,641 42,878 45,040 47,054 48,992 50,782 52,423 53,989 55,406 56,599 0 500 999 1,491 1,991 2,491 2,983 3,482 3,982 4,474
800 28,635 31,469 34,153 36,763 39,224 41,610 43,773 45,861 47,874 49,664 51,304 52,796 54,138 55,331 0 529 1,059 1,588 2,125 2,655 3,184 3,714 4,243 4,772
850 29,306 32,214 34,899 37,509 39,970 42,281 44,444 46,383 48,247 49,887 51,379 52,646 0 567 1,126 1,693 2,252 2,819 3,385 3,945 4,511 5,071
900 29,903 32,736 35,495 38,031 40,417 42,654 44,667 46,532 48,247 49,664 0 597 1,193 1,790 2,386 2,983 3,579 4,176 4,772 5,369
950 30,275 33,184 35,868 38,329 40,641 42,729 44,667 46,308 47,799 0 634 1,260 1,887 2,520 3,154 3,781 4,407 5,041 5,675
1,000 30,574 33,407 36,017 38,404 40,641 42,579 44,295 0 664 1,327 1,991 2,655 3,318 3,982 4,638 5,309 5,973
1,050 30,648 33,407 35,943 38,254 40,268 42,057 0 694 1,394 2,088 2,789 3,482 4,176 4,877 5,772 6,271
1,100 30,574 33,258 35,644 37,807 39,671 0 731 1,462 2,185 2,916 3,646 4,377 5,108 5,839 6,570
1,150 30,275 32,885 35,122 37,061 0 761 1,529 2,289 3,050 3,818 4,579 5,339 6,100 6,868
1,200 29,903 32,289 34,377 0 798 1,596 2,386 3,184 3,982 4,772 5,570 6,368 7,166
1,250 29,231 31,469 0 828 1,663 2,483 3,318 4,146 4,974 5,802 6,629 7,464
1,300 28,411 30,499 0 865 1,730 2,588 3,453 4,310 5,175 6,033 6,898 7,763

C-13
PAES 301:2000

Table 8 – Service factors for components of farm implements


Function of operating unit Service factor
Cutting (sickle bars) 1.5
Cutting (sickle bars with counter weight) 1.3
Cutting (reels) 1.0
Pickup attachments for combines 1.0
Feeding (front cylinder beaters, feeder rolls, draper canvas, etc.) 1.3
Threshing, chopping, etc. (combine cylinders, corn-sheller cylinders, hammer-mill
1.5
motors, etc)
Separation (rear cylinder beaters, straw walkers, etc.) 1.0
Cleaning (fans, cleaning shoes, sieves, etc.) 1.0
Expelling (straw spreaders, husk blowers, etc.) 1.3
Delivery (augers, elevators, etc.) 1.3
Traction for self-propelled machines 1.3
Hydraulic system, oil pumps 1.3

Table 9 – Correction factors corresponding to various degrees of contact on small pulley


Arc of contact, degrees Correction factor Arc of contact, degrees Correction factor
180 1.00 133 0.87
174 0.99 127 0.85
169 0.97 120 0.82
163 0.96 113 0.80
157 0.94 106 0.77
151 0.93 90 0.73
145 0.91 91 0.70
139 0.89 83 0.65

7.5 Correction for belt length

Since short belts are subjected to the action of load a greater number of times, the hours of
life of a short belt are less than those of a long belt. A correction factor for belt-length should
be applied to achieve a proper design of belt drives. The belt-length correction factor is
specified in Table 10.

7.6 Corrected power rating

The corrected power is obtained by getting the product of the arc correction factor, belt-
length correction factor and the power rating of the selected belt from Tables 3-7. In getting
the power rating from Tables 3-7, an additional power to account for the speed ratio is added.

7.7 Multiple belt drives

In order to determine the number of belts to be used in multiple belt drives, the power
capacity of the drive (section 7.3.2) is divided by the corrected power rating (see section 7.6)

C-14
PAES 301:2000

Table 10 – Belt length and belt length correction factor


Length Outside length Belt correction factor
designation A B C D E A B C D E
26 713.74 - - - - 0.81 - - - -
31 840.74 - - - - 0.84 - - - -
35 942.34 960.12 - - - 0.87 0.81 - - -
38 1,018.54 1,036.32 - - - 0.88 0.83 - - -
42 1,120.14 1,137.92 - - - 0.90 0.85 - - -
46 1,221.74 1,239.52 - - - 0.92 0.87 - - -
51 1,348.74 1,366.52 1,402.08 - - 0.94 0.89 0.80 - -
55 1,450.34 1,468.12 1,503.68 - - 0.96 0.90 - - -
60 1,557.34 1,595.12 1,630.68 - - 0.98 0.92 0.82 - -
68 1,780.54 1,798.32 1,833.88 - - 1.00 0.95 0.85 - -
75 1,958.34 1,976.12 2,011.68 - - 1.02 0.97 0.87 - -
80 2,085.34 - - - - 1.04 - - - -
81 - 2,128.52 2,164.08 - - 0.98 0.89 - -
85 2,212.34 2,230.12 2,265.68 - - 1.05 0.99 0.90 - -
90 2,339.34 2,357.12 2,392.68 - - 1.06 1.00 0.91 - -
96 2,491.74 - 2,545.08 - - 1.08 - 0.92 - -
97 - 2,534.92 2,570.48 - - - 1.02 - - -
105 2,720.34 2,738.12 2,773.68 - - 1.10 1.04 0.94 - -
112 2,898.14 2,915.92 2,951.48 - - 1.11 1.05 0.95 - -
120 3,101.34 3,119.12 3,154.68 3,180.08 - 1.13 1.07 0.97 0.86 -
128 3,304.54 3,322.32 3,357.88 3,383.28 - 1.14 1.08 0.98 0.87 -
144 - 3,728.72 3,764.28 3,789.68 - - 1.11 1.00 0.90 -
158 - 4,048.32 4,119.88 4,145.28 - - 1.13 1.02 0.92 -
173 - 4,465.32 4,500.88 4,526.28 - - 1.15 1.04 0.93 -
180 - 4,643.12 4,678.68 4,704.08 4,749.8 - 1.16 1.05 0.94 0.91
195 - 5,024.12 5,059.68 5,085.08 5,130.8 - 1.18 1.07 0.96 0.92
210 - 5,405.12 5,440.68 5,466.08 5,511.8 - 1.19 1.08 0.98 0.94
240 - 6,129.02 6,151.88 6,164.58 6,184.9 - 1.22 1.11 1.00 0.96
270 - 6,891.02 6,913.88 6,926.58 6,946.9 - 1.25 1.14 1.03 0.99
300 - 7,653.02 7,675.88 7,688.58 7,708.9 - 1.27 1.16 1.05 1.01
330 - - 8,437.88 8,450.58 8,470.9 - - 1.19 1.07 1.03
360 - - 9,199.88 9,212.58 9,232.9 - - 1.21 1.09 1.05
390 - - 9,961.88 9,974.58 9,994.9 - - 1.23 1.11 1.07
420 - - 10,723.88 10,736.58 10,756.9 - - 1.24 1.12 1.09
480 - - - 12,260.58 12,280.9 - - - 1.16 1.12
540 - - - 13,784.58 13,804.9 - - - 1.18 1.14
600 - - - 15,308.58 15,328.9 - - - 1.20 1.17
660 - - - 16,832.58 16,852.9 - - - 1.23 1.19

8 Idlers

8.1 Idlers may be necessary on agricultural belt drives to provide take-up or to increase
the arc of contact to obtain the required drive capacity. If an idler is needed, it should be
located on the slack side of the drive.

8.2 An idler should have its axis of rotation perpendicular to the plane of the belt strand
on which it runs. The idler mounting should be strong enough to maintain its relationship at
all times.

C-15
PAES 301:2000

8.3 Idlers may be grooved or flat (Figure 6). If grooved idlers are needed, groove
dimensions should be as shown in Table 2. Grooved idlers used as inside idlers (Figure 7),
should be placed close to the large pulley. Flat idlers are used as either inside or outside
idlers (Figure 7). Table 11 specifies the minimum recommended diameters for idlers.

Table 11 - Minimum recommended diameters for idlers, mm


Minimum O.D. Minimum O. D. Minimum face
Minimum O.D of
Cross section of grooved inside of flat outside width of flat
flat inside idler
idler idler idler
A 70 57 108 25
B 102 95 152 32
C 172 146 216 38
D 229 190 343 51

Do D

Grooved idler Flat idler

Figure 6 - Types of idlers

Driven
Driven

Driver

Driver

Inside idler Outside idler

Figure 7 – Positions of idlers

C-16
PAES 301:2000

9 Safety

9.1 Enclosing the drive with covers is recommended for safety and to avoid foreign
materials from getting in contact with the drive.

9.2 Make drive inspection on a periodic basis. Inspect belts for wear and tear and for its
tightness. Tightness of keys and setscrews should also be inspected periodically.

9.3 Use belts with proper markings.

9.4 Use proper keys as specified in PAES 304:2000.

C-17
PAES 301:2000

Annex A
(Informative)

Example of V-belt drive selection

A.1 Given parameters

A 7,457 W split-phase motor running at 1,750 rpm is to be used to drive a rotary pump. The
pump should run at approximately 1,175 rpm. The center distance should not exceed 1,118
mm. Space limits the diameter of the driven pulley to 292 mm. Determine the pulley
diameters, the belt size, and the number of belts.

A.2 Power capacity of the drive (design power)

The power capacity of the drive is the product of the nameplate rating and the recommended
service factor given in Table 8. The obtained power capacity of the drive is:

Design Power = 1.3 × 7,450 W = 9,685W

A.3 Belt selection

A.3.1 The belt section to be used shall be section B belt (from Figure 5)

A.3.2 The size of the driven pulley that will be used shall be 280 mm. The diameter of the
small pulley is:

nL 1,175 rpm
DS = DL × = 280 mm × = 188 mm
nS 1,750 rpm

Where:
DL is the pitch diameter of the large pulley, mm
DS is the pitch diameter of the small pulley, mm
nL number of revolutions of the large pulley, rpm
nS number of revolutions of the small pulley, rpm

A.3.3 Since the limit for center distance is 1,118 mm, use 1,000 mm tentatively. Compute
for the length using the equation below.

L = 2C +
π
(DL + DS )+ ( DL − DS )
2

2 4C

π
(280 mm + 188 mm) + (280 mm − 188 mm)
2
L = 2 × 1,000 mm + = 2,002.12 mm
2 4 × 1,000 mm

C-18
PAES 301:2000

A.3.4 Since the obtained length is not a standard length, select a length from stock sizes
provided by the manufacturers. A correction for the center distance shall be made using the
following equation.

b + b 2 − 32(D L − D S )
2

C=
16
Where:
b = 4 LS − 6.28(DL + DS )
LS = Standard length

A.4 Belt speed

The belt speed is computed as:

π × DS × n S π × 188 mm × 1750 rpm


V = = = 1,033.58 m/min
1,000 1,000

A.5 Speed ratio

The speed ratio of the drive is computed by:

n S 1,750 rpm
Speed ratio = = = 1.48
n L 1,175 rpm

A.6 Power rating of the belt

Given the velocity and the diameter of the small pulley, the closest power rating of the belt
from Table 4 for Section B V-belts is given by:

Power rating = table rating + additional power for speed ratio


= 6,174 + 433
= 6,607 W/ belt

A.7 Arc of contact

The arc of contact is computed from the equation below. The computed arc of contact given
the above parameters is 174.78 degrees. The arc of contact correction factor from Table 9 is
0.98.

60(280 − 188)
Arc of contact = 180 − = 174.78 °
1,000

C-19
PAES 301:2000

A.8 Corrected power rating

The corrected power is the product of the power rating, service factor, arc of contact
correction factor, and the belt length correction factor. For the obtained length, the belt
length correction factor is 1.00 (Table 10). Therefore, the correct power is:

Corrected power rating = 6,607watts × 0.98 × 1.00 = 6,475 W/ belt

A.9 Required number of belts for multiple drives

The number of belts needed is:

Power capacity 9,685 W


Number of belts = = = 1.496 ≈ 2 belts
Corrected power rating 6,475 W / belt

Therefore use two section B belts for this drive.

C-20

You might also like