Professional Documents
Culture Documents
Nef M280
Nef M280
Air induction
Max suggested intake restriction with clean air filter kPa(bar) 3.5 (0.035)
Max allowable restriction with dirty air filter kPa(bar) 6.5 (0.065)
Air requirement for combustion at 100% load/rated speed (comb. + ventilation) kg/h (m3/h) 5200 (4500)
Turbocharging pressure at full load/rated speed kPa(bar) 150 (1.5)
Turbocharging air max temperature (engine inlet) °C 40
Exhaust system
Max allowable backpressure kPa(bar) 10 (0.1)
Max exhaust temperature at maximum power °C 580
Exhaust flow at max output kg/h 1130
Lubrication system
Minimum oil pressure at idle (at 100°C) kPa(bar) 70 (0.7)
Max oil temperature at full load/rated speed °C 120
Engine angularity limits continuous operation: max front up and front down 0/360 16
max left hand and right hand 0/360 22 30’
Total system capacity including pipes, filters etc. liters 16.5
Fuel system
Injection system mechanical pump
Gas oil max intake restriction kPa(bar) 15 (0,15)
Gas oil max intake temperature °C 40
Max fuel backpressure to tank kPa(bar) 30 (0.3)
Electrical system
Voltage V 12
N67 MNT M28 FOR MARINE APPLICATIONS
Rating type A1 B C D
Maximum power * kW(CV) 206 (280) 191 (260) 169 (230) 132 (180)
At speed rpm 2800 2800 2800 2500
Maximum no load governed speed at max rating rpm 3150
Minimum idling speed rpm 650
Mean piston speed at rated speed m/s 12.3 12.3 12.3 11.0
BMEP at max torque kg/cm2 18.2 15.2 11.2 11.3
Available certifications RINA CCNR
Specific fuel consumption at full load (best value) g/kWh @ rpm 214 @ 2000
Oil consumption at max rating (% of fuel consumption) ≤ 0.2
Minimum starting temperature without auxiliaries °C - 15
Oil and oil filter maintenance interval for replacement hours 600
Dry weight (without marine gear) kg 605
* Net Power at flywheel according to ISO 3046/1, after 50 hours running, fuel Diesel EN 590. Power tolerance 5%
Test conditions : ISO 3046/1, 25 °C air temperature, 100 kPa atmospheric pressure, 30 % relative humidity.
A1 - B C D
350 350 350
300 300 300
250 250 250
Power - kW
A1
200 200 200
150 B 150 150
100 100 100
50 50 50
0 0 0
280 280
260 260 260
240 A1 240 240
220 220 220
200 B 200
200
1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800
rpm rpm rpm
A1= High performance crafts. C = Medium duty. D = Heavy duty.
B = Light duty. Full throttle operation < 25% of use Maximum rating utilisation up to 100%
Full throttle operation restricted within period. of use period,for unlimited hours per
10% of total use period. Cruising speed at engine rpm < 90% year.
Cruising speed at engine rpm < 90% of rated speed setting - Maximum
of rated speed setting - Maximum useage 3000 hours per year.
useage :
- 300 hours per year (A1 service)
- 1500 hours per year (B service).
L = 1236 mm
W = 780 mm
H = 793 mm
N67 MNT M28 FOR MARINE APPLICATIONS
Standard configuration
Flywheel housing SAE 3
Flywheel size inch 11.5
Air filter rear side
Turbocharger cooled
Heat exchanger tube type
Exhaust cooled elbow -
Water charge tank included
Fuel filter n° 1 - left side
Fuel prefilter included (loose)
Fuel pump included
Oil filter n° 1- right side
Oil sump aluminium
Oil vapours blow-by circuit rear
Oil heat exchanger built in the crankcase
Oil filler on timing cover frontward
Starting motor 12 V - 3 kW
Alternator 12 V - 90 A
Engine stop device electrical excitation
Wiring harness engine wiring
Painting colour white “ ICE ”
IVECO MOTORS OFFERS THE WIDEST AVAILABILITY OF ENGINE BUILD OPTIONS TO CUSTOMER SPECIFIC REQUIREMENTS WITHIN THE ENGINE SUPPLY.
TO FIND OUT MORE ABOUT THE CONFIGURATIONS AND ACCESSORIES WHICH ARE AVAILABLE, CONTACT THE IVECO MOTORS SALES NETWORK.
Local Distributor
Iveco Motors
Via Puglia, 15 - 10156 Torino IT
Tel. +39 (011) 0076245 - Fax +39 (011) 0076275
Iveco Motors
V.le dell’Industria, 15/17- 20010 Pregnana Mil.se Milano IT
Tel. +39 (02) 935101 - Fax +39 (02) 93590029
www.ivecomotors.com
NEF 6CYL 2V TAA N67 MNT M28
Page B-03
NEF 6CYL 2V TAA N67 MNT M28
Page B-04
NEF MARINE RANGE STD CONFIGURATION
Timing Gear Train - P.t.o. Flywheel side gear train - No power take off
Fuel injection system Mec. system : loose electr. lift pump - rotary injection pump - fuel pipes - injectors
Fuel pre-filter Loose prefilter with sedimenter, water presence el. Sender
Engine shut off 12 V energize to stop fuel shut off ( build in the injection pump )
Intercooler - Intake Manifold Raw water cooled interc. directly con. with the intake manifold (soft water NEF 280 KC)
Cooling system heat exchanger Soft water / raw water heat exchanger ( excluded NEF 280 KC )
Soft water pump Poly-V belt driven soft water centrifugal pump ( anticavitation profile fibre impeller )
Raw water pump Gear driven raw water pump (1½ "cetrifugal pump with neoprene impeller)(excluded NEF 280 KC)
Oil - pump Cylinder block integrated gear-type oil pump ( crankshaft driven )
Oil - coolant heat exchanger Cylinder block embodied plate-type oil cooler
Sheet 1/2
SUMMARY ENGINE SPECIFICATIONS APPLICATIONS BILL OF MATERIAL: N67 MNT M28 Date: 06/12/05
Check: Pagnoncelli M.
View: Burgazzi
PRP DEPARTMENT o
Combining obbligation X
Specific Applic.
Comm. code
UY
Optional code
Combining obbl.
A07000502
A07000505
A07000506
A10000505
A10020504
A14170507
A14240504
A15020502
A16010501
A16030504
A16050503
A16070501
A17120501
A38200501
A38200502
A38300504
A38310505
A38320504
A38330505
A38420502
A38420503
A38430501
A38440502
A38440503
A38550502
A38560502
A38600503
A38600504
A38650501
A38650504
A38770516
A38770517
A38770518
A38780520
A38780521
A38780522
A38870501
A38880501
A42001501
A59000511
A59200501
A98100519
A98100520
A98100521
A98120508
Incompatibility
EBOM Structure
Loose supply
Mod. date
Doc. database
FC code
assembly. A
choice
TECHNICAL DESCRIPTION CARRY OVER Employment limits
A04010503 4,01 Rigid engine mountings
A07000544 07,00/2 Injection pump calibration with pre-setting 169 kW 2800 RPM o o o
A07000543 07,00/3 Injection pump calibration with pre-setting 191 kW 2800 RPM X X
A07000545 07,00/4 Injection pump calibration with pre-setting 132 kW 2500 RPM X X
A1000505 10,00 Starting motor 24V N40ENTM25.10 X o X o o
A38550502 38.55/1 Sending unit for simple instruments and alarm 12-24V VDO P.I.
A38560502 38.56/1 Sending unit for double instruments and alarm 12-24V VDO P.I.
A51380501 51.38/15 Gearbox T.DRIVE TM880 A Ratio 1,53:1 angle 10° Coupling VULCAN 1K 28100001
A51380502 51.38/20 Gearbox T.DRIVE TM880 A Ratio 2,08:1 angle 10° Coupling VULCAN 1K 28100001
A51610507 51.61/11 Gearbox T. DISC MG 5061 SC Ratio 1,150:1 Coupling CENTA CF-DS-7-2-011-0218
LAST MODIFICATION DATE: 23-01-04,27/04/04
Sheet 2/2
SUMMARY ENGINE SPECIFICATIONS APPLICATIONS BILL OF MATERIAL: N67 MNT M28 Date: 06/12/05
Check: Pagnoncelli M.
View: Burgazzi
PRP DEPARTMENT o
Combining obbligation X
Specific Applic.
Comm. code
UY
Optional code
Combining obbl.
A07000502
A07000505
A07000506
A10000505
A10020504
A14170507
A14240504
A15020502
A16010501
A16030504
A16050503
A16070501
A17120501
A38200501
A38200502
A38300504
A38310505
A38320504
A38330505
A38420502
A38420503
A38430501
A38440502
A38440503
A38550502
A38560502
A38600503
A38600504
A38650501
A38650504
A38770516
A38770517
A38770518
A38780520
A38780521
A38780522
A38870501
A38880501
A42001501
A59000511
A59200501
A98100519
A98100520
A98100521
A98120508
Incompatibility
EBOM Structure
Loose supply
Mod. date
Doc. database
FC code
assembly. A
choice
TECHNICAL DESCRIPTION CARRY OVER Employment limits
A51610508 51.61/14 Gearbox T. DISC MG 5061 SC Ratio 1,480:1
A51620507 51.62/15 Gearbox T. DISC MG 5061 A Ratio 1,540:1 angle 7° Coupling CENTA CF-DS-7-2-011-0218
A51930505 51.93/15 Gearbox T. DISC MG 5050 A Ratio 1,500:1 angle 10° Coupling CENTA CF-DS-7-2-011-0218