Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Huawei - APE4518R42v06 Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

APE4518R42v06

DXXXXX-1695-2690/1695-2690/1695-2180/2490-2690/1695-2690-65/65/65/65/65-
17.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 5H 10-Port Antenna with 5 Integrated RCUs - 2.0m

Antenna Specifications
Electrical Properties
2 x (1695 - 2690) (Ly1/Ry4) 1695 - 2690 (CLy2)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45° +45°, -45°
2 - 12, continuously adjustable, each band
Electrical downtilt (°) 2 - 12 , continuously adjustable
separately
at mid Tilt 17.3 17.5 17.7 18.0 17.3 17.5 17.7 18.0
Gain (dBi) over all Tilts 17.1 ±0.6 17.3 ±0.5 17.5 ±0.5 17.8 ±0.5 17.1 ±0.7 17.3 ±0.5 17.5 ±0.6 17.8 ±0.6
Side lobe suppression for first
> 16 > 16 > 17 > 16 > 16 > 16 > 17 > 16
side lobe above main beam (dB)
Horizontal 3dB beam width (°) 68 ±6 66 ±5 64 ±5 60 ±6 66 ±6 64 ±5 63 ±5 60 ±6
Vertical 3dB beam width (°) 6.4 ±0.5 5.7 ±0.5 5.2 ±0.5 4.7 ±0.4 6.3 ±0.5 5.7 ±0.5 5.2 ±0.5 4.7 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio , ±30°(dB) > 25 > 25 > 25 > 25 > 25 > 25 > 25 > 25
Cross polar ratio (dB) 0° > 17 > 17 > 17 > 17 > 17 > 17 > 17 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground

Electrical Properties
1695 - 2180 (b1)
Frequency range (MHz) 2490 - 2690 (CRy3)
1695 - 1990 1920 - 2180
Polarization +45°, -45° +45°, -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable 2 - 12 , continuously adjustable
at mid Tilt 17.0 17.2 17.5
Gain (dBi) over all Tilts 16.8 ±0.7 17.0 ±0.6 17.3 ±0.6
Side lobe suppression for first side > 16 > 16 > 16
lobe above main beam (dB)
Horizontal 3dB beam width (°) 65 ±6 63 ±6 60 ±6
Vertical 3dB beam width (°) 6.6 ±0.5 6.0 ±0.5 4.7 ±0.5
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
Interband isolation (dB) ≥ 28 ≥ 28
Front to back ratio, ±30°(dB) > 25 > 25 > 25
Cross polar ratio (dB) 0° > 17 > 17 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature)* 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50 50
Grounding DC Ground DC Ground

* Total power : 900 W (at 50℃ ambient temperature)

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


2. Electrical datasheet in XML format is available.

1
APE4518R42v06
DXXXXX-1695-2690/1695-2690/1695-2180/2490-2690/1695-2690-65/65/65/65/65-
17.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 5H 10-Port Antenna with 5 Integrated RCUs - 2.0m

Mechanical Properties 106


Antenna dimensions (H x W x D) (mm) 2099 x 395 x 196
Packing dimensions (H x W x D) (mm) 2345 x 485 x 240
Antenna weight (kg) 30.3

(724)
Clamps weight (kg) 4.1 (2 units)
Antenna packing weight (kg) 41.3 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65

2099
1310
Frontal: 660 (at 150 km/h)
Wind load (N) Lateral: 270 (at 150 km/h)
Maximum: 790 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 10 x 4.3-10 Female
Connector position Bottom

65
Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 12 ° 2.1 kg 1 (Separate packing)

Pattern sample for reference

1695 - 2690 MHz 1695 - 2180 MHz 2490 - 2690 MHz

2
APE4518R42v06
DXXXXX-1695-2690/1695-2690/1695-2180/2490-2690/1695-2690-65/65/65/65/65-
17.5i/17.5i/17i/17.5i/17.5i-M/M/M/M/M-R
EasyRET 5H 10-Port Antenna with 5 Integrated RCUs - 2.0m

Integrated RET Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
NC NC RS-485B NC RS-485A DC DC return NC

Lightning protection (kA) 8 (8/20 μs)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching
function, contact Huawei before system installation.

Standards: EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission), EN/IEC 62368-1(Safety),ETSI EN 301 489
Certification: CE, RoHS, REACH, WEEE

Integrated RET S/N:


HWxxxx………Ly1
y3
HWxxxx…….CLy2
HWxxxx…….....b1
y1 y2 y4
HWxxxx……CRy3
b1
HWxxxx…......Ry4
f

b - Blue y - Yellow
C - Center array L - Left array R - Right array

NOTE

1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4.Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 3 Issue: 2020-04-10

You might also like