BSB

BSB
SINGLE INLET
CENTRIFUGAL FAN
with Backward Wheels
BSB Series
SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
Kruger Ventilation Industries certifies that the BSB

series shown herein is licensed to bear the AMCA
Seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA
publication 211 and AMCA publication 311 and comply
with the requirements of the AMCA Certified Ratings
Program.
BSB Series
BSB Series
Single Inlet Centrifugal Fans – Backward wheels
The BSB series is SISW centrifugal fans with high efficiency non-overloading backward curved impellers.
The fans are suitable for supply or exhaust applications in commercial, process and industrial HVAC systems.
Sizes of this series are in accordance with AMCA standard 99-0098-76 R20.
Type / Operating Limit

Each fan type has its maximum operating speed and power due to its mechanical design.
The operating limit of different fan types of BSB series is set according to the requirement of class I, II
and III limit as defined in AMCA standard 99-2408-69.
The BSB series is available in type C, T, X, Z, U or P.
Model 315 to 630
Type C-U-P I Model 710 to 1400

Type T-U-P II I Model 1600 to 2000
Type X-U-P III II II
Type Z-U-P III III
Type C
This type has a frame fitted on both sides of the fan, providing better strength and rigidity.
It allows mounting in four different orientations.
Fan Size : 315 to 630
Volume : 1500 to 20000 m3/h
Total Pressure : up to 2000 Pa
Type T
This type has a welded frame, giving increased stiffness and rigidity required for higher
operating performance.
Volume : 1500 to 100000 m3/h
Type X/Z
This structure is similar to Type T but utilizes enhanced bearings to support higher dynamic
load necessary for the increased performance.
Volume : 1500 to 100 000m3/h
Total Pressure: up to 5000 Pa
Type Z is non-standard, for more information, please consult your nearest Kruger office for
details.
Type U
This type is manufactured with a special frame with two bearings fixed externally to the
airflow eliminating any obstruction to the inlet and allow operation with air temperature
up to max. of 180°C
Volume : 1500 to 360 000 m3/h
Type P
This type is manufactured with a special frame with two bearings fixed externally to the
airflow eliminating any obstruction to the inlet and allow operation with air temperature
up to max. of 200°C
Volume : 1500 to 100 000 m3/h
2
BSB Series
TECHNICAL SPECIFICATION
Wheel
The wheel of BSB series is made of cold rolled sheet steel backward curved
blades with polyester powder coating finish.
Housing
For all sizes except 1250 and above, the housing is manufactured in galvanized
sheet steel with the housing fixed to the side plates in "pittsburg lock" form
system.
Housing for 1250 and 2000 are manufactured in mild steel finished with
polyester powder coating.
Fully welded steel plate housings with painted finish are available for all sizes
upon request.
Frame
The frame is manufactured with galvanized angular bars for type "C". For type
"T", "X", "U" and “P”, they are manufactured with sections of steel with
polyester powder coating finish.
Shaft
Shafts are manufactured from C45 carbon steel using an automatic process for
positioning and cutting of the keyways. All dimensional tolerances of the shaft
are fully checked to ensure a precision fit. All shafts are then coated with an
anti-corrosion varnish after assembly.
Bearings
Bearings used are either deep groove ball bearing type with an adapter sleeve,
or spherical roller bearings sealed at both sides for different duty application
and are classified as below:
Mounted in a
Mounted on cast iron supports with grease point
rubber housing
C T X U
Fan Type
CM Medium Duty TM Medium Duty XM Medium Duty UM Medium Duty

Bearing Duty
eg. Model: XX
TX Extra Heavy Duty Extra Heavy Duty UX Extra Heavy Duty
BSB 450 C M
Fan Bearing Duty (M, X)
Fan Type (C, T, X, Z, U)
Fan Size (315, 355, 400…1400)
Except TX, XX, UX extra heavy duty bearings, all bearings are lubricated for life and
maintenance-free. If re-lubrication is necessary, it is recommended to use a lithium
base grease suitable for all temperatures within the operational limits.
For type P bearing, please consult your nearest Kruger office for details.
3
BSB Series
Balancing Quality
All wheels are statically and dynamically balanced to ISO1940 and
AMCA 204 – G2.5 standards.
All fans after assembly are trim-balanced to ISO1940 and AMCA 204 -
G2.5 standard.
Clean room application fans with balancing grade of G1.0 are available
upon request.
ACCESSORIES
Casing Drain
This option is available when using fans exposed to the atmosphere or
operating in high humidity conditions.
P3
Outlet Flanges
Outlet flanges are available upon request.
Inlet Flanges
This option are set against the fan to facilitate installation. It is available
P4 in 2 types-“L” flange or “U” flange.
Inspection Doors
The inspection door can be supplied upon request. It can be supplied in
one of the three positions (P3, P4 & P5).
P5
Guards
Inlet guards, discharge guards and non-drive end shaft guards are
available on request.
Fan Rotation and Discharge

The rotation and discharge of the fan is in accordance with AMCA standard 99-2406-83.
The direction of rotation is determined from the drive side of the fan :-
CW - clockwise rotation CCW - counter-clockwise rotation
CW90 CW180 CW270 CW360 CCW90 CCW180 CCW270 CCW360
Motor Position
The position of the motor for belt drive
centrifugal fan is in accordance with AMCA
standard 99-2407-66.
Location of motor is determined by facing the

drive side of fan and designated by letters W,
X, Y, or Z.
4
BSB Series
100
80 Motor Selection
60
Correction Factor, % motor power output
40
The power curves shown on each performance
30 graph represent the absorbed power at the shaft of
20 the fan measured in kW.
15
To determine the power of the motor to be
10
8 installed, a correction factors should be applied to
2 Pole
6 compensate for transmission losses.
4 & 6 Pole
4
3
For conversion to horsepower (HP), use multiplying
2
factor 1.34.
1.5
1
0.45
0.75
15
22.5
30
45
60
75
150
225
300
450
0.2
0.3
0.6
1.5
2.2
4.5
7.5
3
Motor power output (kW)
Dynamic Pressure
Both dynamic pressure and outlet air velocity values shown on each graph are calculated base on the full discharge area, i.e.
ducted outlet conditions.
With free outlet conditions the velocity pressure is higher. To determine this new value, multiply the velocity pressure of the
ducted outlet obtained from the fan curve by the following correction factor “K”.
K = 1.67
Fan performances calculated with this correction factors are not licensed by AMCA.
Performance
The performance data shown on each graph is derived from tests conducted in accordance to AMCA Standard 210 –
Fig 12 – installation type B (free inlet and ducted outlet condition).
Ratings refer to the standard air density with the total pressure as a function of the air volume, using logarithmic scales.
It is essential that the same installation type and test standards are used at all times when comparing fan performance.
Noise
The noise levels shown on each graph refer to the "A-weighted" sound power values and the data on the inlet side has been
measured in accordance with AMCA Standard 300 diag. 2 - configuration "B". The noise levels of the fans are determined as
follows :
Sound power level - ("A" scale): Lw (A) as catalogue
Octave band spectrum: Lw = Lw(A) + Lw rel. dB [refer to Kruger for more details]
Sound pressure level:
a) free field
Lp(A) = Lw(A) - (20log10d) -11
b) room conditions
Lp(A) = Lw(A) - (20log10d) -8
where d = distance from fan (m)
5
BSB Series
Performance
The performance data shown on each diagram is derived from tests

conducted in accordance to AMCA Standard 210- Fig 12- Installation type
B (free inlet and duct outlet condition).
Ratings refer to standard air density with the total pressure as a function
of the air volume, using logarithmic scale.
It is essential that the same installation type and test standards are used
at all time when comparing fan performance.
According to AMCA 205, BSB series can be classify as FEG 80~85 based
on fan peak efficiency. The following is the explanation of FEG
classification:
1. Fan size is the impeller diameter in mm.

2. The fan peak efficiency shall be calculated from the fan (total)
pressure.
3. If this method is used for a direct driven fan, the fan efficiency is the
impeller efficiency.
4. The FEG label for a given fan size is assigned when the fan peak
efficiency is equal to or lower than the efficiency at the grade upper
limit, and higher than the efficiency at the grade upper limit of the
next lower grade for the fan size.
5. For any fan sizes larger than 1016 mm, the values of the grade upper
limits are the same as for a size of 1016 mm.
6. No labels are considered for the fans with the fan peak total
efficiency below FEG 50.
7. The values of efficiencies are calculated for fan sizes in the preferred
R40 Series.
8. Not all available fan sizes are shown.
Fan Efficiency Grades (FEG) for Fans without Drives (SI) – AMCA 205
6
Example of Selection
BSB 560
Op Limit Cl. I Cl. II Cl. III
FEG 80 Type C-U-P T-U-P X-U-P
M. kW 6 13 26
M. RPM 1800 2300 2900
γ
η
Air Volume Q = 6660 m3/h
Outlet Velocity V = 6.77 m/s
Dynamic Pressure Pd = 27 Pa
Total Pressure Pt = 1250 Pa
Fan Speed N = 1510 rpm
Absorbed Power W = 3.22 kW
Total Efficiency η = 71.8 %
Sound Power Level Lw(A) = 81.3 dB(A)
- Performance shown is for Installation type B - free inlet, ducted outlet. Performance ratings do not include the effects
of appurtenances (accessories). Power rating kW does not include transmission losses.
- The A-weighted sound ratings shown have been calculated per AMCA standard 301. Values shown are for inlet Lwi(A)
sound power levels for installation type B - free inlet, ducted outlet. Ratings do not include the effect of duct end corrections.
7
FEG 80
8
FEG 80
9
FEG 80
10
BSB 450
FEG 80
Pt [Pa]
η [%] 61 65 71 74 69 59 48
6000
kW
5000 12 15
10
4000 8
6 N [rpm]
3000
5
4
2000 3
3600
2
3300
1.6
1.2 105 2900

1000 1
0.8 2500
100
0.6
0.5 2200
0.4 95 2000
500
0.3 1800
400
90
1600
300
85 1400
1300
200
1200
80
1100
75
Lw (A) [dB(A)]
1000
100
.3 .4 .5 .6 .8 1 2 3 4 5 6 8 10 Q [m3/s]
Q [m3/h]
1000 2000 3000 5000 10000 20000 30000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60
Pd [Pa]
5 10 50 100 500 1000
11
FEG 80
12
FEG 80
13
FEG 80
14
FEG 80
15
FEG 80
16
FEG 85
17
FEG 85
18
FEG 85
19
FEG 85
20
FEG 85
21
BSB 1600
Op Limit Cl. II Cl. III
FEG 80 Type UII UIII
M.kW 100 200
M.RPM 750 1000
Pt [Pa] γ = 1.22 kg/m3

η [%] 49 61 70 78 70 52 31
6000
kW
5000
100 120 150
4000 80
60
3000 50
40
N [rpm]
30
2000
20
16
12
1000 10
1000
8 950
115
900
6 850
5 800
110
750
500
700
80 650
400 105
600
300 550
100
85 500
200 95 450
400
90
Lw (A) [dB(A)] 350
100
3 4 5 6 8 10 20 30 40 50 60 80 100 200 Q [m3/s]
Q [m3/h]
10000 20000 30000 50000 100000 200000 300000 500000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
22
BSB 1800
M.kW 130 260
M.RPM 650 850
Pt [Pa] γ = 1.22 kg/m3

η [%] 49 61 70 78 70 52 31
6000
kW
5000
120 150 200

4000
80
3000
60
50
N [rpm]
40
2000
30
20
16
1000 12
10 850
115
800
8
750
6 700
110
5
500 650
600
400 105
550
80
300 500
100
450
200 95 400
85
350
90
Lw (A) [dB(A)]
300
100
3 4 5 6 8 10 20 30 40 50 60 80 100 200 300 Q [m3/s]
Q [m3/h]
20000 30000 50000 100000 200000 300000 500000 1000000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
23
BSB 2000
M.kW 160 320
M.RPM 600 800
Pt [Pa] γ = 1.22 kg/m3

η [%] 49 61 70 78 70 52 31
6000
kW
5000
160 200 250
300
4000 120
100
3000 80
60 N [rpm]
50
2000
40
30
20
1000 16
800
12 750
115
10 700
650
110 600
500
550
400
105 500
85
300 450
100
400
200
95 350
90
300
Lw (A) [dB(A)]
100
5 6 8 10 20 30 40 50 60 80 100 200 300 Q [m3/s]
Q [m3/h]
20000 30000 50000 100000 200000 300000 500000 1000000
V [m/s]
2 3 4 5 6 8 10 20 30 40 50 60 80 100
Pd [Pa]
1 5 10 50 100 500 1000 5000
24
BSB ‘C’
BSB 315-400 ‘C’
B L
M N
G
X
R
t1
C
z
D
S
Y
A
F
Ød-g6
V
w
==
= F = uxs E
P J
H
K
Model A B C D E F G H J K L M N P R S V X Y t t1 W Z ∅d uxs
315 578 518 340 404 223 330 236 480 253 283 451 78 279 38 3 460 319 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 327 479 72 303 30 6 508 359 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 354 506 72 330 38 5 562 404 302 534 8 7 40 33 30 13x18
All Dimensions in mm.
BSB 450-630 ‘C’
B L
M N
G
X
R
t
=
t1
F
C
z
D
S
Y
A
F1
Ød -g6
V
F
w
=
=
= F F1 F uxs
E
P H J
K
Model A B C D E F F1 G H J K L M N P R S V X Y t t1 W Z ∅d uxs
450 827 726 486 568 308 200 111 322 681 348 388 556 88 364 45 5 624 454 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 425 593 88 401 50 5 694 504 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 653 100 439 48 7 770 564 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 703 100 489 53 6 856 634 461 828 12 8 70 43 40 13x18
25
BSB ‘T’
ser
BSB 315-400 ‘T’
L
B
M N
G
X
R
t1
z
C
D
S
Y
F
A
Ød-g6
V1
V2
V
w
=
= F = uxs E
P H J
K
Model A B C D E F G H J K L M N P R S V V1 V2 X Y t t1 W z Ød uxs
315 578 518 340 404 223 330 236 480 253 283 451 78 279 38 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 327 481 74 303 30 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 354 508 74 330 38 5 562 400 438 480 302 534 8 7 40 33 30 13x18
BSB 450-1000 ‘T’

L
B
M N
G
X
R
t
=
t1
F
z
C
D
S
Y
F1
A
Ød-g6
V1
V2
V
w
F
=
= F F1 F = uxs E
J
P H
K
Model A B C D E F F1 G H J K L M N P R S V V1 V2 X Y t t1 W z Ød uxs
450 827 726 486 568 308 200 111 322 681 348 388 564 96 364 45 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 425 601 96 401 50 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 661 108 439 48 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 711 108 489 53 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 579 763 114 535 63 7 954 710 751 796 507 926 14 9 70 48.5 45 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 633 817 114 589 74 7 1062 800 837 886 561 1034 14 9 70 48.5 45 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 695 906 141 651 89 7 1186 900 934 986 623 1158 16 10 90 59 55 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 763 974 141 719 90 9 1322 1000 1043 1086 691 1294 16 10 90 59 55 17x22
26
BSB ‘T’
BSB 1120-1400 ‘T’

L
B M N
G
X
R
t1
=
z
C
D
S
Y
Ød-g6
A
V2
V1
V
=
w
F
F = = = F uxs E
P H J
K
1120 2033 1725 1200 1422 744 290 748 1630 804 870 1146 133 800 95 9 1478 1120 1180 1226 772 1450 18 11 90 64 60 17x22
1250 2285 1930 1353 1524 804 300 830 1831 878 958 1232 148 859 99 9 1580 1250 1303 1356 831 1552 18 11 110 69 65 17x22
1400 2568 2170 1515 1794 934 310 963 2057 1013 1088 1381 166 990 113 13 1850 1400 1480 1506 962 1822 20 12 110 74.5 70 17x22
27
BSB ‘X’
BSB 315-400 ‘X’

L
B
M N
G
X
R
t1
z
C
D
S
Y
F
A
Ød-g6
V1
V2
V
w
=
= F = uxs E
P H J
K
315 578 518 340 404 223 330 236 480 253 283 457 84 279 38 3 460 315 356 395 251 432 8 7 40 33 30 13x18
355 654 578 383 452 247 368 260 548 287 327 503 96 303 30 6 508 355 395 435 275 480 10 8 50 38 35 13x18
400 736 650 432 506 274 402 290 612 314 354 530 96 330 38 5 562 400 438 480 302 534 10 8 50 38 35 13x18
BSB 450-1000 ‘X’

L
B
M N
G
X
R
t
=
t1
F
z
C
D
S
Y
F1
A
Ød-g6
V1
V2
V
w
F
=
= F F1 F = uxs E
J
P H
K
Model A B C D E F F1 G H J K L M N P R S V V1 V2 X Y t t1 W z Ød uxs
450 827 726 486 568 308 200 111 322 681 348 388 586 118 364 45 5 624 450 487 530 336 596 12 8 70 43 40 13x18
500 918 800 538 638 345 245 120 352 750 385 425 623 118 401 50 5 694 500 541 580 373 666 12 8 70 43 40 13x18
560 1030 892 603 714 383 280 125 390 844 433 483 667 114 439 48 7 770 560 605 646 411 742 14 9 70 48.5 45 13x18
630 1157 998 679 800 433 328 110 434 945 483 533 717 114 489 53 6 856 630 674 716 461 828 14 9 70 48.5 45 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 579 787 138 535 63 7 954 710 751 796 507 926 14 9 90 53.5 50 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 633 841 138 589 74 7 1062 800 837 886 561 1034 14 9 90 53.5 50 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 695 911 146 651 89 7 1186 900 934 986 623 1158 18 11 90 64 60 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 763 979 146 719 90 9 1322 1000 1043 1086 691 1294 18 11 90 64 60 17x22
28
BSB ‘X’
BSB 1120-1400 ‘X’

L
B M N
G
X
R
t1
=
z
C
D
S
Y
Ød-g6
A
V2
V1
V
=
w
F
F = = = F uxs E
P H J
K
1120 2033 1725 1200 1422 744 290 748 1630 804 870 1173 160 800 95 9 1478 1120 1180 1226 772 1450 18 11 110 69 65 17x22
1250 2285 1930 1353 1524 804 300 830 1831 878 958 1250 166 859 99 9 1580 1250 1303 1356 831 1552 20 12 110 74.5 70 17x22
1400 2568 2170 1515 1794 934 310 963 2057 1013 1088 1396 181 990 113 13 1850 1400 1480 1506 962 1822 22 14 110 85 80 17x22
29
BSB ‘UI’
BSB 315-400 ‘UI’
B N
G X
R
t1
z
C
S
D
Y
Ød-g6
A
V1
V2
V
w
=
E
= F = uxs
J Q
P H M
L
Model A B C D E F G H J L M N P Q R S V V1 V2 X Y t t1 w z ∅d uxs
315 578 518 340 404 223 330 236 480 253 705 60 279 38 274 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 765 60 303 30 300 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 812 60 330 38 320 5 562 400 438 480 302 534 8 7 40 33 30 13x18
BSB 450-1000 ‘UI’

B N
G X
R
t
=
t1
z
C
S
Y
D
Ød-g6
A
F1
V1
V2
w
F
=
E
= F F1 F = UxS
J Q
P H
K M
L
Model A B C D E F F1 G H J L M N P Q R S V V1 V2 X Y t t1 w z ∅d uxs
450 827 726 486 568 308 200 111 322 681 348 876 80 364 45 340 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 933 80 401 50 360 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 1018 90 439 48 378 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 1090 90 489 53 400 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 1156 90 535 63 420 7 954 710 751 796 507 926 14 9 70 48.5 45 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 1228 90 589 74 440 7 1062 800 837 886 561 1034 14 9 70 48.5 45 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 1360 110 651 89 490 7 1186 900 934 986 623 1158 16 10 90 59 55 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 1448 110 719 90 510 9 1322 1000 1043 1086 691 1294 16 10 90 59 55 17x22
30
BSB ‘UI’
BSB 1120-1400 ‘UI’
B N
G X
R
t1
z
C
S
D
Y
Ød-g6
A
V1
V2
V
=
w
F
E
F = = = F uxs
J Q
P H M
L
1120 2033 1725 1200 1422 744 290 748 1630 804 1680 110 800 95 572 9 1478 1120 1180 1226 772 1450 18 11 90 64 60 17x22
1250 2285 1930 1353 1524 807 300 830 1831 878 1844 140 859 99 632 9 1580 1250 1303 1356 831 1552 18 11 110 69 65 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 2060 140 990 113 717 13 1850 1400 1480 1506 962 1822 20 12 110 74.5 70 17x22
31
BSB ‘UII’
BSB 315-400 ‘UII’

B N
G X
R
t1
z
C
S
D
Y
Ød -g6
A
V1
V2
V
w
=
E
= F = uxs
J Q
P H M
L
315 578 518 340 404 223 330 236 480 253 705 60 279 38 274 3 460 315 356 395 251 432 8 7 40 28 25 13x18
355 654 578 383 452 247 368 260 548 287 765 60 303 30 300 6 508 355 395 435 275 480 8 7 40 33 30 13x18
400 736 650 432 506 274 402 290 612 314 812 60 330 38 320 5 562 400 438 480 302 534 8 7 40 33 30 13x18
BSB 450-1000 ‘UII’

B N
G X
R
t
=
t1
z
C
S
Y
D
Ød -g6
F1
A
V1
V2
w
F
=
uxs E
= F F1 F =
P J Q
H M
L
Model A B C D E F F1 G H J L M N P Q R S V V1 V2 X Y t t1 w z ∅d uxs
450 827 726 486 568 308 200 111 322 681 348 876 70 364 45 340 5 624 450 487 530 336 596 10 8 50 38 35 13x18
500 918 800 538 638 345 245 120 352 750 385 933 70 401 50 360 5 694 500 541 580 373 666 10 8 50 38 35 13x18
560 1030 892 603 714 383 280 125 390 844 433 1018 90 439 48 378 7 770 560 605 646 411 742 12 8 70 43 40 13x18
630 1157 998 679 800 433 328 110 434 945 483 1090 90 489 53 400 6 856 630 674 716 461 828 12 8 70 43 40 13x18
710 1302 1120 765 898 479 360 150 484 1057 529 1176 110 535 63 420 7 954 710 751 796 507 926 14 9 90 53.5 50 17x22
800 1468 1254 862 1006 533 405 171 540 1180 583 1248 110 589 74 440 7 1062 800 837 886 561 1034 14 9 90 53.5 50 17x22
900 1648 1408 971 1130 595 455 189 604 1319 645 1360 110 651 89 490 7 1186 900 934 986 623 1158 18 11 90 64 60 17x22
1000 1810 1540 1066 1266 663 500 200 656 1450 713 1448 110 719 90 510 9 1322 1000 1043 1086 691 1294 18 11 90 64 60 17x22
32
BSB ‘UII’
BSB 1120-1400 ‘UII’
B N
G X
R
t1
z
C
S
D
Y
Ød-g6
A
V1
V2
V
=
w
F
uxs E
F = = = F
J Q
P H M
L
1120 2033 1725 1200 1422 744 290 748 1630 804 1710 140 800 95 572 9 1478 1120 1180 1226 772 1450 18 11 110 69 65 17x22
1250 2285 1930 1353 1524 807 300 830 1831 878 1844 140 859 99 632 9 1580 1250 1303 1356 831 1552 20 12 110 74.5 70 17x22
1400 2568 2170 1515 1794 938 310 963 2057 1013 2060 140 990 113 717 13 1850 1400 1480 1506 962 1822 22 14 110 85 80 17x22
BSB 1600-2000 ‘UII’
L
N B
X T
E G
INSPECTION
C
M DOOR
Y
P
Ød
A
V1
V2
V
10- Ø 28
R Q J S D F U F D
I H
Model A B C D E F G H I J K L M N P Q R S T U V V1 V2 X Y t t1 w z ∅d
1600 2950 2486 1790 70 1064 550 1086 1840 2222 1210 2025 2495 170 1224 2185 905 60 47 2430 600 1600 1690 1760 1154 2115 22 14 110 85 80
1800 3314 2798 2004 66 1196 620 1220 2002 2436 1381 2278 2680 190 1356 2438 905 65 85 2740 630 1800 1920 1990 1286 2358 25 14 140 106 90
2000 3705 3142 2246 60 1320 700 1376 2230 2568 1513 2530 2842 220 1490 2725 905 65 85 3078 710 2000 2130 2230 1410 2655 28 16 160 116 100
33
BSB ‘UIII’
BSB 1600-2000 ‘UIII’

L
N B
X T
E G
INSPECTION
C
M DOOR
Y
K
P
Ød
A
V1
V2
V
10- Ø 28
R Q J S D F U F D
I H
Model A B C D E F G H I J K L M N P Q R S T U V V1 V2 X Y t t1 w z ∅d
1600 2950 2486 1790 70 1064 550 1086 1840 2222 1210 2025 2495 170 1224 2185 905 60 47 2430 600 1600 1690 1760 1154 2115 25 14 140 95 90
1800 3314 2798 2004 66 1196 620 1220 2002 2436 1381 2278 2680 190 1356 2438 905 65 85 2740 630 1800 1920 1990 1286 2358 28 16 160 106 100
2000 3705 3142 2246 60 1320 700 1376 2230 2568 1513 2530 2842 220 1490 2725 905 65 85 3078 710 2000 2130 2230 1410 2655 28 16 160 116 110
34
BSB ‘PI’
ser
BSB 315-1400 ‘PI’
B
G E K
t
t1
z
C
D
Ød-g6
w
A
F F F F Øu
H
Model A B C D E F G H K t t1 w z ∅d ∅u
315 572 516 340 404 223 330 236 500 482 8 7 40 28 25 11
355 644 576 383 452 247 368 260 550 483 8 7 40 33 30 11
400 724 644 432 506 274 402 290 620 511 8 7 40 33 30 11
450 816 722 486 568 308 200 322 680 632 8 7 50 38 35 13
500 906 794 538 638 345 245 352 720 635 10 8 50 38 35 13
560 1016 886 603 714 383 280 390 780 657 12 8 70 43 40 13
630 1142 992 679 800 433 328 434 850 727 12 8 70 43 40 13
710 1286 1114 765 898 479 360 484 930 731 14 9 70 48.5 45 13
800 1449 1248 862 1006 533 405 540 1030 737 14 9 70 48.5 45 15
900 1631 1401 971 1130 595 455 604 1110 805 16 10 90 53.5 55 15
1000 1793 1520 1066 1266 663 500 656 1200 867 16 10 90 53.5 55 15
1120 2017 1719 1200 1422 744 290 748 1340 976 18 11 90 64 60 15
1250 2278 1931 1353 1524 807 300 830 1350 1152 18 11 110 69 65 17
1400 2541 2157 1515 1794 938 310 963 1350 1200 20 12 110 74.5 70 17
35
BSB ‘PII’
ser
BSB 315-1400 ‘PII’
B
G E K
t1
z
C
D
Ød-g6
w
A
F F F F Øu
H
Model A B C D E F G H K t t1 w z ∅d ∅u
315 572 516 340 404 223 330 236 800 727 8 7 40 28 25 11
355 644 576 383 452 247 368 260 850 753 8 7 40 33 30 11
400 724 644 432 506 274 402 290 920 811 8 7 40 33 30 11
450 816 722 486 568 308 200 322 980 852 10 8 50 38 35 13
500 906 794 538 638 345 245 352 1020 895 10 8 50 38 35 13
560 1016 886 603 714 383 280 390 1080 907 12 8 70 43 40 13
630 1142 992 679 800 433 328 434 1150 947 12 8 70 43 40 13
710 1286 1114 765 898 479 360 484 1200 931 14 9 90 53.5 50 13
800 1449 1248 862 1006 533 405 540 1230 1037 14 9 90 53.5 50 15
900 1631 1401 971 1130 595 455 604 1310 1205 18 11 90 64 60 15
1000 1793 1520 1066 1266 663 500 656 1340 1207 18 11 90 64 60 15
1120 2017 1719 1200 1422 744 290 748 1340 1326 18 11 110 69 65 15
1250 2278 1931 1353 1524 807 300 830 1350 1332 20 12 110 74.5 70 17
1400 2541 2157 1515 1794 938 310 963 1350 1400 22 14 110 85 80 17
36
Accessories
Inlet Flange
Model A B C H nxd
H H
315 315 356 395 120 6 x 10
355 355 395 435 120 8 x 10 N x Ød
400 400 438 480 120 8 x 10

450 450 487 530 120 8 x 10
500 500 541 580 120 8 x 10
560 560 605 646 120 8 x 10
ØB
630 630 674 716 120 8 x 10
ØC
ØA
710 710 751 796 120 8 x 10
800 800 837 886 120 12 x 12
900 900 934 986 120 12 x 12
1000 1000 1043 1086 120 12 x 12 L-Flange U-Flange
1120 1120 1180 1226 200 14 x 12
1250 1250 1303 1356 200 16 x 14
1400 1400 1480 1506 200 18 x 14
All Dimension in mm.
Outlet Flange
315-1120
C
B G
Model A B C D E F G
315 223 251 279 404 432 460 28

D
355 247 275 303 452 480 508 28

F
E
A
400 274 302 330 506 534 562 28
450 308 336 364 568 596 624 28
500 345 373 401 638 666 694 28
Ø9 560 383 411 439 714 742 770 28
630 433 461 489 800 828 856 28
710 479 507 535 898 926 954 28
1250-1400 C G
B 800 533 561 589 1006 1034 1062 28
900 595 623 651 1130 1158 1186 28
1000 663 691 719 1266 1294 1322 28
1120 744 772 800 1422 1450 1478 28
1250 803 831 859 1524 1576 1624 50
D
E
F
1400 934 962 990 1794 1860 1920 63

A
All Dimension in mm.
37
OVERALL DIMENSION – BSB “C” SERIES
CW 90° (Pos Z) CW 270° (Pos W) CW 360° (Pos W) CW 360° (Pos Z)
C
C C2
C1
H
H
H
H
W L L W L W W L
CCW 90° (Pos W) CCW 270° (Pos Z) CCW 360° (Pos W) CCW 360° (Pos Z)
C C
C1 C2
H
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

Model Frame C C * Wt * Wt
Size L W H C1 C2 L W H
(90°) (270°) (kg) (kg)
315 63 432 476 740 481 618 24 507 407 840 481 558 25
71 460 500 780 481 618 24 534 433 880 481 558 25
80 488 524 820 481 618 25 561 459 920 481 558 25
90 515 547 860 481 618 25 587 484 960 481 558 25
100 542 571 900 481 618 25 614 509 1000 481 558 25
112 568 594 940 481 618 25 638 533 1040 481 558 26
355 71 496 547 840 509 694 31 593 479 960 509 618 32
80 523 570 880 509 694 31 601 485 980 509 618 32
90 549 592 920 509 694 31 626 509 1020 509 618 32
100 576 615 960 509 694 32 652 534 1060 509 618 32
112 620 654 1020 509 694 32 695 575 1120 509 618 32
400 71 561 621 920 536 776 39 651 527 1040 536 690 40
80 569 626 940 536 776 40 677 550 1080 536 690 40
90 595 647 980 536 776 40 702 573 1120 536 690 40
100 621 669 1020 536 776 40 727 597 1160 536 690 41
112 664 708 1080 536 776 40 750 619 1200 536 690 41
132 719 756 1160 536 776 41 823 689 1300 536 690 41
450 71 607 680 980 586 867 48 708 571 1120 586 766 49
80 633 701 1020 586 867 48 733 593 1160 586 766 49
90 658 722 1060 586 867 48 757 615 1200 586 766 49
100 684 743 1100 586 867 49 791 647 1250 586 766 49
112 707 763 1140 586 867 49 824 678 1300 586 766 50
132 741 790 1200 586 867 49 846 699 1350 586 766 50
500 71 654 736 1060 623 968 67 791 642 1250 623 850 68
80 661 740 1080 623 968 67 779 629 1250 623 850 68
90 686 760 1120 623 968 67 812 659 1300 623 850 69
100 711 780 1160 623 968 68 845 691 1350 623 850 69
112 734 799 1200 623 968 68 877 720 1400 623 850 69
132 805 861 1300 623 968 69 899 740 1450 623 850 70
560 80 734 827 1180 683 1080 88 897 728 1400 683 942 90
90 739 830 1200 683 1080 88 884 714 1400 683 942 90
100 773 858 1250 683 1080 89 916 744 1450 683 942 90
112 804 884 1300 683 1080 89 947 773 1500 683 942 91
132 875 945 1400 683 1080 90 968 792 1550 683 942 91
160 938 998 1500 683 1080 91 1028 848 1650 683 942 92
630 80 829 937 1300 733 1207 115 967 782 1500 733 1048 117
90 862 964 1350 733 1207 116 998 811 1550 733 1048 117
100 848 950 1350 733 1207 116 1031 840 1600 733 1048 118
112 879 975 1400 733 1207 116 1061 868 1650 733 1048 118
132 948 1034 1500 733 1207 117 1082 886 1700 733 1048 119
160 1010 1085 1600 733 1207 118 1140 940 1800 733 1048 119
* The above weight does not include motor and drive unit as these will vary with supplier. All Dimensions in mm.
38
OVERALL DIMENSION - BSB “T” SERIES
C C2
C C1
H
W L L W L W W L
C C
C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

(90°) (270°) (kg) (kg)
315 80 488 524 820 481 618 39 561 459 920 481 558 39
90 515 547 860 481 618 39 587 484 960 481 558 39
100 542 571 900 481 618 39 614 509 1000 481 558 39
112 568 594 940 481 618 39 638 533 1040 481 558 40
132 625 645 1020 481 618 40 694 587 1120 481 558 40
355 80 523 570 880 511 694 55 601 485 980 511 618 56
90 549 592 920 511 694 55 626 509 1020 511 618 56
100 576 615 960 511 694 56 652 534 1060 511 618 56
112 620 654 1020 511 694 56 695 575 1120 511 618 56
132 676 704 1100 511 694 56 749 628 1200 511 618 57
400 90 595 647 980 538 776 66 702 573 1120 538 690 66
100 621 669 1020 538 776 66 727 597 1160 538 690 67
112 664 708 1080 538 776 66 750 619 1200 538 690 67
132 719 756 1160 538 776 67 823 689 1300 538 690 67
160 776 806 1250 538 776 67 888 752 1400 538 690 68
450 90 658 722 1060 594 867 78 757 615 1200 594 766 79
100 684 743 1100 594 867 79 791 647 1250 594 766 79
112 707 763 1140 594 867 79 824 678 1300 594 766 80
132 741 790 1200 594 867 79 846 699 1350 594 766 80
160 807 847 1300 594 867 80 909 759 1450 594 766 80
500 90 686 760 1120 631 968 101 812 659 1300 631 850 103
100 711 780 1160 631 968 102 845 691 1350 631 850 103
112 734 799 1200 631 968 102 877 720 1400 631 850 103
132 805 861 1300 631 968 103 899 740 1450 631 850 104
160 870 917 1400 631 968 103 961 799 1550 631 850 105
560 100 773 858 1250 691 1080 137 916 744 1450 691 942 138
112 804 884 1300 691 1080 137 947 773 1500 691 942 139
132 875 945 1400 691 1080 138 968 792 1550 691 942 139
160 938 998 1500 691 1080 139 1028 848 1650 691 942 140
180 1012 1064 1600 691 1080 139 1100 917 1750 691 942 141
630 100 848 950 1350 741 1207 167 985 797 1550 741 1048 168
112 879 975 1400 741 1207 167 1015 824 1600 741 1048 169
132 948 1034 1500 741 1207 168 1082 886 1700 741 1048 170
160 1010 1085 1600 741 1207 169 1140 940 1800 741 1048 170
180 1034 1103 1650 741 1207 169 1211 1008 1900 741 1048 171
200 1107 1169 1750 741 1207 170 1235 1030 1950 741 1048 172
710 90 907 1028 1450 793 1382 214 1080 868 1700 793 1200 217
100 941 1055 1500 793 1382 215 1112 897 1750 793 1200 218
112 972 1080 1550 793 1382 215 1142 924 1800 793 1200 218
132 993 1095 1600 793 1382 216 1162 941 1850 793 1200 219
160 1054 1144 1700 793 1382 217 1220 994 1950 793 1200 220
180 1126 1207 1800 793 1382 218 1290 1061 2050 793 1200 221
800 100 1018 1156 1600 847 1548 255 1218 983 1900 847 1334 259
112 1048 1180 1650 847 1548 256 1247 1009 1950 847 1334 260
132 1115 1235 1750 847 1548 257 1267 1024 2000 847 1334 260
160 1174 1283 1850 847 1548 258 1370 1120 2150 847 1334 262
180 1197 1300 1900 847 1548 259 1391 1139 2200 847 1334 263
200 1269 1362 2000 847 1548 260 1461 1206 2300 847 1334 264
39
OVERALL DIMENSION - BSB “T” SERIES
C C2
C C1
H
W L L W L W W L
C C
C1 C2
H
H
H
L W W L L W W L
Motor 90° / 270° 360°

(90°) (270°) (kg) (kg)
900 100 1140 1302 1750 936 1728 315 1374 1108 2100 936 1488 319
112 1169 1325 1800 936 1728 316 1403 1133 2150 936 1488 320
132 1189 1338 1850 936 1728 316 1421 1148 2200 936 1488 321
160 1293 1425 2000 936 1728 318 1476 1197 2300 936 1488 322
180 1315 1441 2050 936 1728 319 1543 1260 2400 936 1488 323
200 1385 1501 2150 936 1728 320 1564 1278 2450 936 1488 324
1000 112 1286 1463 1950 1004 1890 371 1514 1222 2300 1004 1620 376
132 1305 1475 2000 1004 1890 372 1532 1236 2350 1004 1620 376
160 1361 1518 2100 1004 1890 373 1586 1282 2450 1004 1620 377
180 1429 1575 2200 1004 1890 374 1651 1343 2550 1004 1620 379
200 1451 1591 2250 1004 1890 375 1719 1405 2650 1004 1620 380
225 1515 1644 2350 1004 1890 376 1781 1463 2750 1004 1620 381
1120 112 1358 1564 2050 1176 2158 653 1631 1300 2450 1176 1850 664
132 1423 1615 2150 1176 2158 656 1695 1356 2550 1176 1850 667
160 1479 1658 2250 1176 2158 659 1749 1403 2650 1176 1850 669
180 1547 1715 2350 1176 2158 661 1815 1464 2750 1176 1850 672
200 1616 1773 2450 1176 2158 664 1836 1482 2800 1176 1850 673
225 1680 1827 2550 1176 2158 667 1945 1585 2950 1176 1850 677
250 1746 1882 2650 1176 2158 669 2008 1645 3050 1176 1850 680
1250 132 1575 1805 2350 1262 2410 927 1884 1504 2800 1262 2055 949
160 1629 1846 2450 1262 2410 932 1937 1550 2900 1262 2055 954
180 1696 1900 2550 1262 2410 937 2002 1608 3000 1262 2055 959
200 1717 1914 2600 1262 2410 939 2068 1669 3100 1262 2055 963
225 1779 1965 2700 1262 2410 944 2129 1725 3200 1262 2055 968
250 1842 2017 2800 1262 2410 949 2190 1782 3300 1262 2055 973
1400 132 1744 2011 2600 1411 2693 1225 2096 1675 3100 1411 2295 1249
160 1796 2050 2700 1411 2693 1229 2148 1720 3200 1411 2295 1253
180 1815 2062 2750 1411 2693 1232 2212 1778 3300 1411 2295 1258
200 1881 2115 2850 1411 2693 1237 2232 1794 3350 1411 2295 1261
225 1942 2164 2950 1411 2693 1241 2291 1848 3450 1411 2295 1265
250 2004 2214 3050 1411 2693 1246 2352 1903 3550 1411 2295 1270
280 2060 2259 3150 1411 2693 1251 2408 1954 3650 1411 2295 1275
40
OVERALL DIMENSION - BSB “X” SERIES
C C2
C C1
H
W L L W L W L W
C C
C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

(90°) (270°) (kg) (kg)
315 112 568 594 940 487 618 41 638 533 1040 487 558 42
132 625 645 1020 487 618 42 694 587 1120 487 558 42
160 715 728 1140 487 618 42 791 684 1250 487 558 43
355 132 676 704 1100 533 694 57 749 628 1200 533 618 58
160 745 766 1200 533 694 58 816 693 1300 533 618 58
180 823 839 1300 533 694 58 892 769 1400 533 618 59
400 132 719 756 1160 560 776 68 823 689 1300 560 690 68
160 776 806 1250 560 776 68 888 752 1400 560 690 69
180 854 877 1350 560 776 69 914 778 1450 560 690 69
450 160 807 847 1300 616 867 82 909 759 1450 616 766 85
180 883 916 1400 616 867 82 983 832 1550 616 766 83
200 960 987 1500 616 867 83 1059 906 1650 616 766 83
500 160 870 917 1400 653 968 105 961 799 1550 653 850 107
180 945 985 1500 653 968 106 1034 871 1650 653 850 107
200 972 1008 1550 653 968 107 1109 944 1750 653 850 108
560 160 938 998 1500 697 1080 142 1076 895 1700 697 942 143
180 1012 1064 1600 697 1080 142 1100 917 1750 697 942 144
200 1038 1085 1650 697 1080 143 1173 989 1850 697 942 144
225 1109 1149 1750 697 1080 144 1242 1056 1950 697 942 145
630 180 1034 1103 1650 747 1207 171 1211 1008 1900 747 1048 173
200 1107 1169 1750 747 1207 172 1235 1030 1950 747 1048 174
225 1177 1230 1850 747 1207 173 1301 1095 2050 747 1048 174
250 1247 1294 1950 747 1207 174 1370 1161 2150 747 1048 175
710 160 1054 1144 1700 817 1382 220 1220 994 1950 817 1200 223
180 1126 1207 1800 817 1382 221 1290 1061 2050 817 1200 224
200 1150 1226 1850 817 1382 222 1313 1082 2100 817 1200 225
225 1219 1286 1950 817 1382 223 1379 1146 2200 817 1200 226
800 180 1197 1300 1900 871 1548 263 1391 1139 2200 871 1334 267
200 1269 1362 2000 871 1548 264 1461 1206 2300 871 1334 268
225 1336 1420 2100 871 1548 266 1526 1268 2400 871 1334 269
250 1404 1480 2200 871 1548 267 1592 1332 2500 871 1334 270
900 180 1315 1441 2050 941 1728 323 1543 1260 2400 941 1488 327
200 1385 1501 2150 941 1728 324 1564 1278 2450 941 1488 328
225 1451 1557 2250 941 1728 325 1627 1338 2550 941 1488 329
250 1518 1615 2350 941 1728 326 1692 1399 2650 941 1488 330
1000 200 1451 1591 2250 1009 1890 382 1719 1405 2650 1009 1620 387
225 1515 1644 2350 1009 1890 383 1781 1463 2750 1009 1620 388
250 1581 1700 2450 1009 1890 384 1844 1523 2850 1009 1620 389
280 1690 1796 2600 1009 1890 386 1903 1579 2950 1009 1620 391
1120 200 1616 1773 2450 1203 2158 675 1836 1482 2800 1203 1850 684
225 1680 1827 2550 1203 2158 678 1945 1585 2950 1203 1850 688
250 1746 1882 2650 1203 2158 680 2008 1645 3050 1203 1850 691
280 1806 1932 2750 1203 2158 683 2067 1700 3150 1203 1850 694
1250 200 1717 1914 2600 1280 2410 952 2068 1669 3100 1280 2055 976
225 1779 1965 2700 1280 2410 957 2129 1725 3200 1280 2055 981
250 1842 2017 2800 1280 2410 962 2190 1782 3300 1280 2055 986
280 1901 2064 2900 1280 2410 967 2247 1835 3400 1280 2055 991
1400 225 1942 2164 2950 1426 2693 1261 2291 1848 3450 1426 2295 1285
250 2004 2214 3050 1426 2693 1266 2352 1903 3550 1426 2295 1290
280 2060 2259 3150 1426 2693 1271 2408 1954 3650 1426 2295 1295
315 2160 2343 3300 1426 2693 1278 2505 2046 3800 1426 2295 1302
41
OVERALL DIMENSION – BSB “UI” SERIES
C C C2
C1
H
W L L W L W W L
C C C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

Model Frame C C * Wt (kg) * Wt (kg) * Wt
(90°) (270°) 90° 270° (kg)
315 63 432 476 740 735 618 40 41 507 407 840 735 558 42
71 460 500 780 735 618 40 41 534 433 880 735 558 42
80 488 524 820 735 618 41 42 561 459 920 735 558 42
90 515 547 860 735 618 41 42 587 484 960 735 558 43
100 542 571 900 735 618 41 42 614 509 1000 735 558 43
112 568 594 940 735 618 42 43 638 533 1040 735 558 43
355 71 496 547 840 795 694 52 56 593 479 960 795 618 56
80 523 570 880 795 694 53 57 601 485 980 795 618 56
90 549 592 920 795 694 53 57 626 509 1020 795 618 57
100 576 615 960 795 694 53 57 652 534 1060 795 618 57
112 620 654 1020 795 694 54 58 695 575 1120 795 618 57
400 71 561 621 920 842 776 63 66 651 527 1040 842 690 66
80 569 626 940 842 776 63 66 677 550 1080 842 690 66
90 595 647 980 842 776 64 67 702 573 1120 842 690 67
100 621 669 1020 842 776 64 67 727 597 1160 842 690 67
112 664 708 1080 842 776 64 67 750 619 1200 842 690 67
132 719 756 1160 842 776 65 68 823 689 1300 842 690 68
450 71 607 680 980 906 867 78 80 708 571 1120 906 766 80
80 633 701 1020 906 867 78 80 733 593 1160 906 766 80
90 658 722 1060 906 867 78 80 757 615 1200 906 766 80
100 684 743 1100 906 867 79 81 791 647 1250 906 766 81
112 707 763 1140 906 867 79 81 824 678 1300 906 766 81
132 741 790 1200 906 867 79 81 846 699 1350 906 766 82
500 71 654 736 1060 963 968 101 103 791 642 1250 963 850 104
80 661 740 1080 963 968 101 103 779 629 1250 963 850 104
90 686 760 1120 963 968 102 104 812 659 1300 963 850 105
100 711 780 1160 963 968 102 104 845 691 1350 963 850 150
112 734 799 1200 963 968 103 105 877 720 1400 963 850 106
132 805 861 1300 963 968 104 106 899 740 1450 963 850 106
560 80 734 827 1180 1048 1080 131 134 897 728 1400 1048 942 135
90 739 830 1200 1048 1080 131 134 884 714 1400 1048 942 135
100 773 858 1250 1048 1080 132 135 916 744 1450 1048 942 136
112 804 884 1300 1048 1080 132 135 947 773 1500 1048 942 137
132 875 945 1400 1048 1080 133 136 968 792 1550 1048 942 137
160 938 998 1500 1048 1080 135 138 1028 848 1650 1048 942 138
630 80 829 937 1300 1120 1207 161 164 967 782 1500 1120 1048 165
90 862 964 1350 1120 1207 161 164 998 811 1550 1120 1048 166
100 848 950 1350 1120 1207 161 164 1031 840 1600 1120 1048 166
112 879 975 1400 1120 1207 162 165 1061 868 1650 1120 1048 167
132 948 1034 1500 1120 1207 163 166 1082 886 1700 1120 1048 168
160 1010 1085 1600 1120 1207 164 167 1140 940 1800 1120 1048 169
710 90 907 1028 1450 1186 1382 219 221 1080 868 1700 1186 1200 226
100 941 1055 1500 1186 1382 220 222 1112 897 1750 1186 1200 226
112 972 1080 1550 1186 1382 221 223 1142 924 1800 1186 1200 227
132 993 1095 1600 1186 1382 222 224 1162 941 1850 1186 1200 228
160 1054 1144 1700 1186 1382 224 226 1220 994 1950 1186 1200 230
180 1126 1207 1800 1186 1382 225 227 1290 1061 2050 1186 1200 232
42
OVERALL DIMENSION – BSB “UI” SERIES
C C C2
C1
H
W L L W L W W L
C C C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

(90°) (270°) 90° 270° (kg)
800 100 1018 1156 1600 1258 1548 287 295 1218 983 1900 1258 1334 297
112 1048 1180 1650 1258 1548 287 295 1247 1009 1950 1258 1334 298
132 1115 1235 1750 1258 1548 289 297 1267 1024 2000 1258 1334 299
160 1174 1283 1850 1258 1548 291 299 1370 1120 2150 1258 1334 302
180 1197 1300 1900 1258 1548 292 300 1391 1139 2200 1258 1334 303
200 1269 1362 2000 1258 1548 294 302 1461 1206 2300 1258 1334 304
900 100 1140 1302 1750 1390 1728 350 359 1374 1108 2100 1390 1488 366
112 1169 1325 1800 1390 1728 351 360 1403 1133 2150 1390 1488 367
132 1189 1338 1850 1390 1728 352 361 1421 1148 2200 1390 1488 368
160 1293 1425 2000 1390 1728 355 364 1476 1197 2300 1390 1488 370
180 1315 1441 2050 1390 1728 355 364 1543 1260 2400 1390 1488 372
200 1385 1501 2150 1390 1728 357 366 1564 1278 2450 1390 1488 373
1000 112 1286 1463 1950 1478 1890 405 412 1514 1222 2300 1478 1620 426
132 1305 1475 2000 1478 1890 406 413 1532 1236 2350 1478 1620 427
160 1361 1518 2100 1478 1890 407 414 1586 1282 2450 1478 1620 429
180 1429 1575 2200 1478 1890 409 416 1651 1343 2550 1478 1620 431
200 1451 1591 2250 1478 1890 410 417 1719 1405 2650 1478 1620 433
225 1515 1644 2350 1478 1890 412 419 1781 1463 2750 1478 1620 434
1120 112 1358 1564 2050 1710 2158 728 728 1631 1300 2450 1710 1850 745
132 1423 1615 2150 1710 2158 732 732 1695 1356 2550 1710 1850 749
160 1479 1658 2250 1710 2158 736 736 1749 1403 2650 1710 1850 753
180 1547 1715 2350 1710 2158 740 740 1815 1464 2750 1710 1850 757
200 1616 1773 2450 1710 2158 745 745 1836 1482 2800 1710 1850 759
225 1680 1827 2550 1710 2158 749 749 1945 1585 2950 1710 1850 765
250 1746 1882 2650 1710 2158 753 753 2008 1645 3050 1710 1850 769
1250 132 1575 1805 2350 1874 2410 1090 1090 1884 1504 2800 1874 2055 1123
160 1629 1846 2450 1874 2410 1098 1098 1937 1550 2900 1874 2055 1130
180 1696 1900 2550 1874 2410 1105 1105 2002 1608 3000 1874 2055 1137
200 1717 1914 2600 1874 2410 1108 1108 2068 1669 3100 1874 2055 1144
225 1779 1965 2700 1874 2410 1116 1116 2129 1725 3200 1874 2055 1152
250 1842 2017 2800 1874 2410 1123 1123 2190 1782 3300 1874 2055 1159
1400 132 1744 2011 2600 2090 2693 1425 1425 2096 1675 3100 2090 2295 1461
160 1796 2050 2700 2090 2693 1432 1432 2148 1720 3200 2090 2295 1468
180 1815 2062 2750 2090 2693 1436 1436 2212 1778 3300 2090 2295 1475
200 1881 2115 2850 2090 2693 1443 1443 2232 1794 3350 2090 2295 1479
225 1942 2164 2950 2090 2693 1450 1450 2291 1848 3450 2090 2295 1486
250 2004 2214 3050 2090 2693 1457 1457 2352 1903 3550 2090 2295 1493
280 2060 2259 3150 2090 2693 1464 1464 2408 1954 3650 2090 2295 1500
43
OVERALL DIMENSION – BSB “UII” SERIES
CW 90° (Pos Z) CW 270°(Pos W) CW 360° (Pos W) CW 360° (Pos Z)
C C C2
C1
H
W L L W L W W L
C C C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

(90°) (270°) 90° 270° (kg)
315 80 488 524 820 735 618 42 43 561 459 920 735 558 43
90 515 547 860 735 618 42 43 587 484 960 735 558 43
100 542 571 900 735 618 42 43 614 509 1000 735 558 43
112 568 594 940 735 618 43 44 638 533 1040 735 558 43
132 625 645 1020 735 618 43 44 694 587 1120 735 558 44
355 80 523 570 880 795 694 54 57 601 485 980 795 618 57
90 549 592 920 795 694 54 57 626 509 1020 795 618 58
100 576 615 960 795 694 54 57 652 534 1060 795 618 58
112 620 654 1020 795 694 55 58 695 575 1120 795 618 58
132 676 704 1100 795 694 55 58 749 628 1200 795 618 59
400 90 595 647 980 842 776 65 67 702 573 1120 842 690 68
100 621 669 1020 842 776 65 67 727 597 1160 842 690 68
112 664 708 1080 842 776 65 67 750 619 1200 842 690 68
132 719 756 1160 842 776 66 68 823 689 1300 842 690 69
160 776 806 1250 842 776 67 69 888 752 1400 842 690 70
450 90 658 722 1060 906 867 79 81 757 615 1200 906 766 82
100 684 743 1100 906 867 80 82 791 647 1250 906 766 82
112 707 763 1140 906 867 80 82 824 678 1300 906 766 82
132 741 790 1200 906 867 81 83 846 699 1350 906 766 83
160 807 847 1300 906 867 81 83 909 759 1450 906 766 83
500 90 686 760 1120 963 968 103 105 812 659 1300 963 850 106
100 711 780 1160 963 968 103 105 845 691 1350 963 850 106
112 734 799 1200 963 968 104 106 877 720 1400 963 850 107
132 805 861 1300 963 968 105 107 899 740 1450 963 850 108
160 870 917 1400 963 968 106 108 961 799 1550 963 850 109
560 100 773 858 1250 1048 1080 134 136 916 744 1450 1048 942 137
112 804 884 1300 1048 1080 134 136 947 773 1500 1048 942 138
132 875 945 1400 1048 1080 136 138 968 792 1550 1048 942 138
160 938 998 1500 1048 1080 137 139 1028 848 1650 1048 942 140
180 1012 1064 1600 1048 1080 138 140 1100 917 1750 1048 942 141
630 100 848 950 1350 1120 1207 163 167 985 797 1550 1120 1048 167
112 879 975 1400 1120 1207 163 167 1015 824 1600 1120 1048 168
132 948 1034 1500 1120 1207 164 168 1082 886 1700 1120 1048 169
160 1010 1085 1600 1120 1207 166 170 1140 940 1800 1120 1048 170
180 1034 1103 1650 1120 1207 166 170 1211 1008 1900 1120 1048 171
200 1107 1169 1750 1120 1207 167 171 1235 1030 1950 1120 1048 172
710 100 941 1055 1500 1206 1382 221 223 1112 897 1750 1206 1200 229
112 972 1080 1550 1206 1382 222 224 1142 924 1800 1206 1200 230
132 993 1095 1600 1206 1382 223 225 1162 941 1850 1206 1200 231
160 1054 1144 1700 1206 1382 225 227 1220 994 1950 1206 1200 232
180 1126 1207 1800 1206 1382 227 229 1290 1061 2050 1206 1200 234
200 1150 1226 1850 1206 1382 228 230 1313 1082 2100 1206 1200 235
225 1219 1286 1950 1206 1382 229 231 1379 1146 2200 1206 1200 237
800 112 1048 1180 1650 1278 1548 290 298 1247 1009 1950 1278 1334 300
132 1115 1235 1750 1278 1548 292 300 1267 1024 2000 1278 1334 301
160 1174 1283 1850 1278 1548 293 301 1370 1120 2150 1278 1334 304
180 1197 1300 1900 1278 1548 294 302 1391 1139 2200 1278 1334 305
200 1269 1362 2000 1278 1548 296 304 1461 1206 2300 1278 1334 307
225 1336 1420 2100 1278 1548 298 306 1526 1268 2400 1278 1334 309
250 1404 1480 2200 1278 1548 300 308 1592 1332 2500 1278 1334 310
44
OVERALL DIMENSION – BSB “UII” SERIES
C C C2
C1
H
W L L W L W W L
CCW 90 °(Pos W) CCW 270° (Pos Z) CCW 360° (Pos W) CCW 360° (Pos Z)
C C C1 C2
H
H
H
L W W L L W W L
Motor 90°/ 270° 360°

(90°) (270°) 90° 270° (kg)
900 112 1169 1325 1800 1390 1728 354 363 1403 1133 2150 1390 1488 370
132 1189 1338 1850 1390 1728 355 364 1421 1148 2200 1390 1488 371
160 1293 1425 2000 1390 1728 358 367 1476 1197 2300 1390 1488 373
180 1315 1441 2050 1390 1728 358 367 1543 1260 2400 1390 1488 375
200 1385 1501 2150 1390 1728 360 369 1564 1278 2450 1390 1488 376
225 1451 1557 2250 1390 1728 362 371 1627 1338 2550 1390 1488 378
250 1518 1615 2350 1390 1728 364 373 1692 1399 2650 1390 1488 380
1000 132 1305 1475 2000 1478 1890 410 416 1532 1236 2350 1478 1620 430
160 1361 1518 2100 1478 1890 411 417 1586 1282 2450 1478 1620 432
180 1429 1575 2200 1478 1890 413 419 1651 1343 2550 1478 1620 434
200 1451 1591 2250 1478 1890 414 420 1719 1405 2650 1478 1620 436
225 1515 1644 2350 1478 1890 416 422 1781 1463 2750 1478 1620 437
250 1581 1700 2450 1478 1890 418 424 1844 1523 2850 1478 1620 439
280 1690 1796 2600 1478 1890 421 427 1903 1579 2950 1478 1620 441
1120 132 1423 1615 2150 1740 2158 738 738 1695 1356 2550 1740 1850 754
160 1479 1658 2250 1740 2158 742 742 1749 1403 2650 1740 1850 758
180 1547 1715 2350 1740 2158 746 746 1815 1464 2750 1740 1850 762
200 1616 1773 2450 1740 2158 750 750 1836 1482 2800 1740 1850 764
225 1680 1827 2550 1740 2158 754 754 1945 1585 2950 1740 1850 770
250 1746 1882 2650 1740 2158 758 758 2008 1645 3050 1740 1850 774
280 1806 1932 2750 1740 2158 762 762 2067 1700 3150 1740 1850 778
1250 132 1575 1805 2350 1874 2410 1096 1096 1884 1504 2800 1874 2055 1129
160 1629 1846 2450 1874 2410 1104 1104 1937 1550 2900 1874 2055 1136
180 1696 1900 2550 1874 2410 1111 1111 2002 1608 3000 1874 2055 1143
200 1717 1914 2600 1874 2410 1114 1114 2068 1669 3100 1874 2055 1150
225 1779 1965 2700 1874 2410 1122 1122 2129 1725 3200 1874 2055 1158
250 1842 2017 2800 1874 2410 1129 1129 2190 1782 3300 1874 2055 1165
280 1901 2064 2900 1874 2410 1136 1136 2247 1835 3400 1874 2055 1172
1400 160 1796 2050 2700 2090 2693 1445 1445 2148 1720 3200 2090 2295 1481
180 1815 2062 2750 2090 2693 1449 1449 2212 1778 3300 2090 2295 1488
200 1881 2115 2850 2090 2693 1456 1456 2232 1794 3350 2090 2295 1492
225 1942 2164 2950 2090 2693 1463 1463 2291 1848 3450 2090 2295 1499
250 2004 2214 3050 2090 2693 1470 1470 2352 1903 3550 2090 2295 1506
280 2060 2259 3150 2090 2693 1477 1477 2408 1954 3650 2090 2295 1513
315 2160 2343 3300 2090 2693 1488 1488 2505 2046 3800 2090 2295 1524
* Please consult Kruger for the overall dimension of fan BSB 1600, 1800 & 2000.
45
46
Operational Limits - "BSB"
315 355 400 450 500 560 630 710 800 900 1000 1120 1250 1400 1600 1800 2000
Maximum Absorbed C kW 2.5 3 3.5 4 5 6 7

Power T kW 5 6 7 10 11 13 16 9 11 14 16 20 25 35
X kW 10 12 15 18 22 26 32 20 25 30 40 50 55 70
Z kW 40 50 60 80 100 110 150
UI-PI kW 2.5 3 3.5 4 5 6 7 9 11 14 16 20 25 35
UII kW 5 6 7 10 11 13 16 20 25 30 40 50 55 70 100 130 160
UIII kW 10 12 15 18 22 26 32 40 50 60 80 100 110 150 200 260 320
PII kW 5 6 7 10 11 13 16 20 25 30 40 50 55 70
PIII kW 10 12 15 18 22 26 32 40 50 60 80 100 110 150
C rpm 3200 2800 2500 2200 1950 1800 1500

Maximum Fan Speed
T rpm 4200 3700 3300 2900 2550 2300 2000 1350 1200 1050 950 850 780 680
X rpm 5300 4700 4200 3600 3200 2900 2500 1800 1600 1400 1250 1150 1000 880
Z rpm 2250 2000 1750 1600 1450 1300 1100
UI rpm 3200 2800 2500 2200 1950 1800 1500 1350 1200 1050 950 850 780 680
UII rpm 4200 3700 3300 2900 2550 2300 2000 1800 1600 1400 1250 1150 1000 880 750 650 600
UIII rpm 5300 4700 4200 3600 3200 2900 2500 2250 2000 1750 1600 1450 1300 1100 1000 850 800
o
Temperature Range / C Max. C 85 85 85 85 85 85 85
Min. -20oC o
T-X-Z Max. C 100 100 100 100 100 100 100 100 100 100 100 100 100 100
o
UI Max. C 180 180 180 180 180 180 180 180 180 180 180 180 180 180
o
UII-UIII Max. C 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180
o
PI-PII-PIII Max. C 200 200 200 200 200 200 200 200 200 200 200 200 200 200
C kg 19 25 33 42 55 76 101
Fan weight
T kg 33 49 59 71 89 123 152 189 228 285 338 575 769 1048
X kg 35 51 60 73 91 126 154 192 232 289 345 586 782 1068
PI kg 45 57 68 95 110 128 160 159 232 288 349 478 574 652
PII kg 60 72 85 110 133 152 185 188 263 325 380 515 588 681
UI kg 32 45 55 68 83 112 140 180 250 311 366 601 833 1139
UII kg 33 46 55 69 84 113 142 182 252 314 369 606 839 1152 2500 3400 3900
UIII kg 60 72 85 110 133 152 185 188 263 325 380 515 588 681 2700 3700 4200
Centrifugal Fan Ordering Information
Fan Details
Fan type DIDW SISW
Impeller type Forward Curved Backward Curved

Others : __________________ (Please State)
Model & size e.g. ADA 560 C Model : ___________________ (If known)
Drive type - belt, direct, Belt Direct Coupling

coupling (if differ from standard) Others : __________________ (Please State)
Arrangement (1 & 3 for bare shaft fan; 4, 8 & 12 for Bare fan
complete with drive system) Complete with drive system
Rotation & Discharge e.g. CCW 270 CW CCW
90 180 270 360
Motor position (refer to diagram) e.g. W W X Y Z

Air Flow Rate Q : __________________
L/S m3/h m3/min m3/s cfm
Pressure (static & total) SP : ___________________
TP : ___________
Pa mmH2O inWG
Fan RPM (if specified) Max. : _________________
Min. : _________________
Noise level dB dBA
Lw : __________________
Lp : __________________ at Distance : _________ m
free field room condition corner / wall
Ambient temperature Temp. : ______________ °C
Air density, if differ from standard Density : ______________ kg/m3

Altitude : _______________ m
Motor Details Fittings Detail

Power kW : _____________ Accessories Inspection door
HP : _____________ Drain plug
Flexible duct
Inlet vane control
No. of Poles / 2P 4P 6P 8P Vibration Isolators:
RPM Others : _______________ Rubber Spring
(pls state RPM) Floor-mount Ceiling-hang
Voltage 220V 415V Silencers :

380V 440V With pod Without pod
400V Others : _______ Inlet Outlet
Both inlet & outlet
Phase 1φ Counter-flanges :
3φ Flat L-type U-type
Inlet Outlet
Frequecy 50 Hz 60 Hz Special Features

Frame size IEC : _________________ Other Painting
NEMA : _______________ Requirements Powder coating
Others : _______________ Hot-dipped galvanizing
Make, if specified Brand : _______________ Spark-resistant

Mfr. : ________________ Corrosion-resistant
Country : _____________ Heat-resistant, temp. _______°C
Smoke Spill,
Max. temp. _____°C for _____Hr
47
NOTES
48
KRUGER GROUP (VENTILATION)
 SINGAPORE  SINGAPORE
KRUGER VENTILATION INDUSTRIES PTE LTD KRUGER ENGINEERING PTE LTD
No. 17, Tuas Avenue 10 No. 17, Tuas Avenue 10
Singapore 639141 Singapore 639141
Tel. +65 68611577 - Fax +65 68613577 Tel. +65 68631191 - Fax +65 68631151
Email: mktg@krugerasia.com Email: mktg@krugerasia.com
Website: www.krugerfan.com
 MALAYSIA  THAILAND
KRUVENT INDUSTRIES (M) SDN BHD KRUGER VENTILATION IND. (THAILAND) CO. LTD
Lot 850, Jalan Subang 7, Taman Perindustrian Subang, 30/105 Moo 1 Sinsakorn Industrial Estate
47500, Subang Jaya, Selangor D.E. Chetsadawithi Road, Khok Kham Mueng, Samuthsakorn 74000, Thailand
Tel. +603 80743399 - Fax +603 80743388 Tel. +662 1050399 - Fax + 662 1050370-2
Email: mktg@kruger.com.my Email: mktg@kruger.co.th
 BEIJING  GUANGZHOU
BEIJING KRUGER VENTILATION CO. LTD GUANGZHOU KRUGER VENTILATION CO. LTD
No. 1A, South Industrial Area, No. 9 Huahui Road, Huashan
Beijing Economical And Technological Huadu, Guangzhou, P.R. China 510880
Development Area, Beijing China 100176 Tel. +86 20-86786070 - Fax +86 20-86786001/86786500
Tel. +86 10-67881366 - Fax +86 10-67880566 Email: gzkruger@krugerchina.com
Email: krugerbj@krugerchina.com
 HONG KONG  SHANGHAI

KRUGER VENTILATION (HONG KONG) LIMITED SHANGHAI KRUGER VENTILATION CO. LTD
Flat C, 9/F, Yeung Yiu Chung (No.8) Industrial Building, No. 500 Yuanguo Road, Anting, Jiading,
20 Wang Hoi Road, Kowloon Bay, Kowloon, Hong Kong Shanghai 201814 P.R. China
Tel. +852 22469182 - Fax +852 22469187 Tel. +86 21-69573266 - Fax +86 21-69573296
Email: info@kruger.com.hk Email: shkruger@krugerchina.com
 WUHAN  TAIPEI
WUHAN KRUGER VENTILATION CO. LTD KRUGER VENTILATION (TAIWAN) CO. LTD
No. 805, Huian Ave, Dongxihu District, No. 157, Ping-an Rd, Hengfeng Village,
Wuhan, Hubei, P.R. China 430000 Dayuan Shiang Taoyuan County 337, Taiwan(ROC)
Tel. +86 27- 83248840/83060522/83097505 Tel. +886 3-3859119 - Fax +886 3-3859118
Fax +86 27- 83261886 Email: kyyang@krugertwn.com.tw
Email: whkruger@krugerchina.com
 PHILIPPINES  AUSTRALIA
KRUGER M&E INDUSTRIES CORPORATION S&P-KRUGER AUSTRALIA PTY LTD
FAPI Compound, E. Rodriguez Ave. 2 Cunningham St,
Tunasan, Muntinlupa City, Philippines 1773 Moorebank N.S.W. 2170
Tel. +63 2-8622892/3/4/6, 5534060 - Fax +63 2-8622891 Tel. +61 2-98227747 - Fax +61 2-98227757
Email: mktg@krugerph.net Email: info@sandpkruger.com.au
 INDONESIA  INDIA
P.T. KRUGER VENTILATION INDONESIA KRUGER VENTILATION INDUSTRIES (INDIA) PVT LTD
JL. Teuku Umar No.20, Kruger Centre, Mumbai-Nasik Highway,
Karawaci - Tangerang 15115, Indonesia Atgaon, Shahapur, Thane 421304, Maharashtra, India
Tel. +62 21-5512288/5513557 - Fax +62 21-5513502 Tel. +91 2527 240170 - Fax +91 2527 240075
Email: mktg@krugerindo.co.id Email: sales@krugerindia.com
 KOREA  INDIA (NORTH)

NEOMATE TECHNOLOGY & CONSULTING CO. LTD KRUGER VENTILATION INDUSTRIES (NORTH INDIA) PVT LTD
2-1010, Ace High Tech City B/D, 54-66 Mullae-dong 3-ga Plot No. - 191, Sector - 59, Ballabgarh, Faridabad - 121 004, Haryana, India
Yeongdeungpo-gu, Seoul, Korea Tel. +91-9958991660/9717449696/8586966303
Tel. +82-2-2679-2052 - Fax. +82-2-2679-2174 Fax. +91-1294135820
Email: y7890@daum.net Email: service@krugerindia.com
 DUBAI  VIETNAM
KRUGER VENTILATION INDUSTRIES, GULF BRANCH KRUGER VENTILATION INDUSTRIES (VIETNAM) CO. LTD
Jebel Ali Free Zone Area (JAFZA) Lot A4, D1 Road, Bourbon An Hoa IP, An Hoa,
P.O. Box No. 262949, Dubai, UAE Trang Bang Dist., Tay Ninh Province, Vietnam
Tel. +971 4 8832017 - Fax. +971 4 8832018 Tel. +84-66 3585200/01/02 - Fax +84-66 3585199
Email: johncs@Krugerasia.com Email: mktg@krugervn.com
The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products.
Certified dimension can be provided upon request.
Edition 2
Printed on J u n 2013
Kruger Ventilation Industries Pte Ltd
A member of
No. 17 Tuas Avenue 10 Singapore 639141
Tel. +65 68611577 - Fax +65 68613577
Website: www.krugerfan.com
CNo. - CAT009.E4 February 2013

BSB - Cat009.e4.ed2

Uploaded by

Copyright:

Available Formats

BSB - Cat009.e4.ed2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BSB - Cat009.e4.ed2

Uploaded by

Copyright:

Available Formats

Kruger Ventilation Industries certifies that the BSB

Type / Operating Limit

Model 315 to 630

Type C-U-P I Model 710 to 1400

CM Medium Duty TM Medium Duty XM Medium Duty UM Medium Duty

Fan Type (C, T, X, Z, U)

Fan Size (315, 355, 400…1400)

Fan Rotation and Discharge

CW - clockwise rotation CCW - counter-clockwise rotation

CW90 CW180 CW270 CW360 CCW90 CCW180 CCW270 CCW360

Location of motor is determined by facing the

Motor power output (kW)

Sound power level - ("A" scale): Lw (A) as catalogue

Sound pressure level:

where d = distance from fan (m)

The performance data shown on each diagram is derived from tests

1. Fan size is the impeller diameter in mm.

Air Volume Q = 6660 m3/h

Outlet Velocity V = 6.77 m/s

Total Pressure Pt = 1250 Pa

Fan Speed N = 1510 rpm

Absorbed Power W = 3.22 kW

Total Efficiency η = 71.8 %

Sound Power Level Lw(A) = 81.3 dB(A)

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

1.2 105 2900

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

of appurtenances (accessories). Power rating kW does not include transmission losses.

Pt [Pa] γ = 1.22 kg/m3

of appurtenances (accessories). Power rating kW does not include transmission losses.

Pt [Pa] γ = 1.22 kg/m3

120 150 200

of appurtenances (accessories). Power rating kW does not include transmission losses.

Pt [Pa] γ = 1.22 kg/m3

of appurtenances (accessories). Power rating kW does not include transmission losses.

BSB 315-400 ‘C’

BSB 450-630 ‘C’

All Dimensions in mm.

BSB 450-1000 ‘T’

All Dimensions in mm.

BSB 1120-1400 ‘T’

All Dimensions in mm.

BSB 315-400 ‘X’

All Dimensions in mm.

BSB 450-1000 ‘X’

All Dimensions in mm.

Impeller type Forward Curved Backward Curved

Drive type - belt, direct, Belt Direct Coupling

Motor position (refer to diagram) e.g. W W X Y Z

Air density, if differ from standard Density : ______________ kg/m3

Voltage 220V 415V Silencers :

Frequecy 50 Hz 60 Hz Special Features

Make, if specified Brand : _______________ Spark-resistant