Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
77 views

Assignment SEMESTER 2 SESSION 2020/2021

1. The document provides instructions for a numerical analysis assignment on determining the deflection, slope, moment, shear force and loading on a beam subjected to a linearly increasing distributed load. 2. Students are divided into groups and assigned different beam parameters to analyze using numerical methods in Excel. They must propose a suitable material and cross-section, perform the analysis, and discuss the results. 3. The assignment will be assessed based on the introduction, development of the solution, results and discussion, conclusion, and writing and tidiness, with marks distributed across these categories.

Uploaded by

Bruh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

Assignment SEMESTER 2 SESSION 2020/2021

1. The document provides instructions for a numerical analysis assignment on determining the deflection, slope, moment, shear force and loading on a beam subjected to a linearly increasing distributed load. 2. Students are divided into groups and assigned different beam parameters to analyze using numerical methods in Excel. They must propose a suitable material and cross-section, perform the analysis, and discuss the results. 3. The assignment will be assessed based on the introduction, development of the solution, results and discussion, conclusion, and writing and tidiness, with marks distributed across these categories.

Uploaded by

Bruh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

TUGASAN

SEMESTER 2 SESI 2020/2021


ASSIGNMENT
SEMESTER 2 SESSION 2020/2021

MAC/MARCH 2021

FAKULTI : FAKULTI KEJURUTERAAN


FACULTY : FACULTY OF ENGINEERING

KOD KURSUS
KA20602
COURSE CODE :

TAJUK KURSUS : ANALISA BERANGKA


COURSE NAME : NUMERICAL ANALYSIS

ARAHAN : 1. TARIKH AKHIR PENGHANTARAN TUGASAN ADALAH PADA 04


JUN 2021 (JUMAAT), 16:00.
2. PENGHANTARAN TERMASUK a) KERTAS KERJA (SILA GUNA
TEMPLAT YANG DIBERIKAN), DAN b) FAIL EXCEL.
3. SEMUA FAIL MESTI DIMUATTURUN DI SCHOOLOGY.
4. POTONGAN SEBANYAK 20% DARIPADA MARKAH YANG
DIPEROLEH DARIPADA PELAJAR AKAN DIKENAKAN JIKA
TUGASAN DIHANTAR SELEPAS TAMAT TEMPOH.

INSTRUCTIONS 1. THE DEADLINE FOR SUBMITTING THE ASSIGNMENT IS ON


THE 04 JUNE 2021 (FRIDAY), 16:00.
2. THE SUBMISSION INCLUDES a) PAPERWORK (PLEASE USE
THE TEMPLATE PROVIDED), AND b) EXCEL FILES.
3. ALL FILES MUST BE UPLOADED IN SCHOOLOGY.
4. A DEDUCATION OF 20% FROM THE MARKS ACHIEVED BY THE
STUDENTS WILL BE IMPOSED IF THE ASSIGNMENT WAS
SUBMITTED AFTER DEADLINE.

Kertas ini mengandungi Tiga (3) muka surat bercetak, tidak termasuk muka surat ini.
This paper consists of Three (3) printed pages, excluding this page.
KA20602

Assignment (20%)
Analysis of Beam Subjected to a Linearly Increasing Distributed Load Using
Numerical Method
CO3 Implement numerical analysis in a computer program and present the numerical
results informatively. (WP1, EA1, WK6)
Submission Softcopy of Paperwork (please use the template provided) and Excel Files.
Deadline 04 June 2021 (Friday), 16:00 [Schoology]
*A deduction of 20% from the marks achieved by the students shall be imposed
if the assignment was submitted after the deadline.

1. Problem Description
You are hired by Over Arup Sdn. Bhd. to work as a group of four (4) to select a suitable
material and cross-section for the loaded beam shown in Figure 1.

Figure 1

The deflection 𝑦 (m) of the beam is expressed as:

!!
𝑦 = "#$%&' (−𝑥 ( + 2𝐿# 𝑥 ) − 𝐿* 𝑥) (Equation 1)

where 𝑤$ = initial load (kN/cm), 𝐸 = the modulus of elasticity and 𝐼 = the moment of inertia
𝐿 = length of beam (cm), and △ 𝑥 = iteration length change (cm). Refer to Table 1 for the
values of the parameters.

a) As a group member, propose a material and cross-section that could be suitable for
the loaded beam above. Provide theoretical justification for the selection. Compute
the deflection (𝑦), slope (𝜃), moment (𝑀), shear force (𝑉) and loading (𝑤) for the
beam by using numerical method of your selection in Microsoft Excel.
b) Work as a group to perform analysis of the results in a) to find the best material and
cross-section for the beam. Justify the selection.
c) Deliver the accomplishment of the project in paperwork in a template provided.

1/3
KA20602

Table 1 List of Group Members and Values of Parameters


Iteration
Initial Length of
length
Group Members load, 𝒘𝟎 beam, 𝑳
change, △ 𝒙
(kN/cm) (cm)
(cm)
1 DESMOND HUANG YII YEW
BRENDON PHILLIP
2.5 600 10
NUR RAMZIATI MUNIRAH BINTI NAZRY
NUR FARRAHANIM BINTI ZAINUDIN
2 CHAI MING HAO
JEFFRON JEPIRIL
3.0 600 10
DG SITI NURAIN BINTI AG MOHD ZAINAL
NADHRAH FITRIN NATASHA BINTI WAHAB
3 MAYNARD XERXES TIMOTHY
EZYAN HANISAH BINTI JAMALUDIN
3.5 600 10
MAX EDWIN
NUR SYAFIQAH BINTI RUSDIN
4 JASFEEQREE BIN JASMIH
ALEX LAM KAH SENG
4.0 600 10
JENNY THOMAS
NUR AINAA BINTI MOHAMMAD NASRI LIAW
5 ELFREDA PETER
JEFFRED SIDOL
4.5 600 10
IRRA NATASHA BINTI RUSMADI
MUHAMMAD ZAIM BIN MOHD ZAPI
6 MUHAMMAD IZZAT BIN MADDIMUNRI
NURUL AMIRAH BINTI BEDIN
5.0 600 10
DANIEL LEO UGONG @ CLADIUS
ANIZA BINTI ANUAR
7 ELISSA JIKINO
MUHAMAD HAFIZ NAJMI BIN ABDUL RAHMAN
2.5 720 12.5
JACKER DILARY JUSCERIK
MUHAMMAD IZZAT BIN IMRAN
8 NURUL NADZIRAH KHAIRUNNISA BINTI MOHD
REDZUAN
NURATIQAH BINTI RUSLIN 3.0 720 12.5
DEAN RYAN YEONG
OWENT NICHOLINNA NICHOLAS
9 KHADIJAH BINTI MOHD HAIRUN
CASSEY OSWALD PETER HENRY @ PETER
HENDRY 3.5 720 12.5
SITI ZULAIKHA BINTI AHNAN
RIDWAN BIN NASSIL
10 NUR SYAZLEEN BINTI HAMSAH
ADILAH BINTI AZMI
4.0 720 12.5
LEISTER NOEL FREDDIE
MUHAMMAD ROZAINI BIN ALIAHMAT
11 NUR FATHIRAH BINTI ROSMAN
MCROYCE DONOVAN DAGUL
4.5 720 12.5
FAISAL BIN SABRIN
AMEERA SYAZANA JAMMY
12 MUHAMAD AWANG NAJIY BIN FADZLI
NUR RAIDAHYATI BINTI TAJUL ARIFIN
5.0 720 12.5
HAZLER IVORKY BIN ALEBABA
LYDIA ERLINDAWATI ABDUL GANI
13 WONG CHUN WEI
ADELITA QUINTANILA COSMAS
2.5 900 15
MOHAMMAD ZARUL HAMIZI BIN SUDIRMAN
SYAMIMI ADLINA BINTI MOHD ZANI
14 BRYENAVEL MATTHEW
SYAHFINAZ BINTI RUSMAN
3.0 900 15
FREDDILA GLORIA BONIUS
MOHD HAZMI ISKANDAR BIN JAMAL

2/3
KA20602

Iteration
Initial Length of
length
Group Members load, 𝒘𝟎 beam, 𝑳
change, △ 𝒙
(kN/cm) (cm)
(cm)
15 BRYAN SIAH CHEE HAO
SHERRY HENRY
3.5 900 15
ISMANOORIFAH BINTI ISMAIL
ELIEZER NEVALL ANTHONY
16 WONG YEE HWA LENNY
AHMAD YUSUP BIN TALINASIS
4.0 900 15
MONIKA A/P SELVAM
MUHAMMAD FAIQ BIN MUMAD
17 VIVIANTI ANN BINJAMIN
ADRIEN REYNARD ANAK ALEXANDER TREANG
4.5 900 15
ADRIZAL EMAONANG BIN SIPRANUS
MOHD ASYRAF HANAFI BIN SULAIMAN
18 DEBBIE NUR ALLYSA BINTI MATTIUS
MARY BANSARON RAYMOND
5.0 900 15
MD HADRI BIN ABDUL MANAN
NICOLLYNE JUSTIN
19 NOELL IBRAHIM FRED
NOOR IDAYU MOHD AZMI
NURAISHAH ROSLAN 3.0 720 10
NURUL ZAWANI BINTI HASANUDIN
SYAQIRAH BINTI NORGAN

2. Assessment Criteria and Marks Distribution


No. Assessment Criteria Marks Distribution (%)

1 Introduction 4

2 Development of Solution (including Excel files) 40

3 Results and Discussion 40

4 Conclusion 8

5 Writing, Tidiness 8

Total 100

3/3

You might also like