ekorsys units:

automation, control, protection, metering and

communications of the electrical network

ekor.rpa series 200

Advanced protection, metering and control
multifunction unit

Reliable innovation. Personal solutions.

www.ormazabal.com
ekor.rpa series 200 ekorsys units:
Advanced protection, metering and control automation, control, protection, metering and
multifunction unit communications of the electrical network

Preface I II
As a result of new demands in supply Depending on the model, the ekor.rpa
quality, there is an increasing need for series 200 units can incorporate current,
automation in distribution networks and voltage and frequency protection functions, 7
for equipment to carry out metering and as well as automation, local/remote control, 1
control supervision functions for the switch metering of electrical parameters, presence 6
in distribution cubicles. and absence of voltage, phase imbalance,
etc.
The ekor.rpa series 200 protection, 2
metering and control units have There are also variants depending on the 8
been designed to cover these needs, characteristics of the voltage metering 5
9
complying with the requirements of the channels (capacitive, resistive and
national and international standards and transformers).
4
recommendations.
3

I. ekor.rpa series 200

Characteristics 1 Screen 4 Micro-USB
maintenance
Compact solution Hardware flexibility 2 Menu keyboard port

in cubicle » Voltage metering with different alternatives: 3 Communications

ports
5 Status LEDs
» Sensors embedded in the bushings
» Integration in the control compartment » Standardised sensors (ekor.evt-r) II. Switchgear
» Built-in test terminal blocks » Conventional voltage transformers
» Reduced commissioning » Current metering with various options: 6 Circuit 8 Current
» Unit assembled, wired and tested in the » Ormazabal transformers installed in breaker transformers
factory bushings (300/1 A, 1000/1 A, 2500/1 A) 7 Earthing 9 Voltage
» Current transformers installed » Ormazabal zero-sequence transformer switch detection:
in the bushings (300/1 A, 1000/1 A) · Sensors
» Any transformer with ratio /1 (transformation embedded in
» Reliability
the bushings
» Optimisation of mean time between failures ratios configurable on station)
· Standardised
(MTBF) sensors
» Programmable vs. cabled automation (ekor.evt-r)
» Backup redundancy: backup tripping coil · Conventional
» Personal safety voltage
» Programmable built-in interlocks transformers
» Alarms

Design ANSI functions configuration

» Modular functionality ekor.rpa series 200 protection functions.
» Protection units
» Scalable automation
» Communications
» Remote control
» Operation and maintenance
» LCD screen
» Control and operation via SCADA
» Supervision, maintenance and local/remote
parameter setting via web
Metering
» Log of faults and events with associated
I E (P+, P-, Q1,…,Q4)
oscillographs
V Angle (φ)
» Real-time metering (I, V, P, Q, E, angle,
P F
frequency, THD and temperature)
Q T
» Non-proprietary configuration software
THD
- Configuration via web server
- Configuration through station keypad-
display

Check functionality and models on next page.

ekorsys units: ekor.rpa series 200
automation, control, protection, metering and Advanced protection, metering and control
communications of the electrical network multifunction unit

Technical characteristics
ekor.rpa series 200 ekor.rpa-210 ekor.rpa-220
General characteristics
24/48/125 Vcc - 230 Vca (Dual power)  
Current analogue inputs 5 + Io(1) 5 + Io(1)
Voltage analogue inputs 5 + Vo(1) 5 + Vo(1)
Configurable digital inputs/outputs (extendable with additional expansion modules) 10/4 10/4
Settings groups 2 2
Timing curve types: IEC and ANSI  
Protection functions
50-51[1]-51[2] 50N-51N[1]-51N[2] 51G  
50Ns-51Ns
PWH  
46 46BC  
67 67N  
67Ns
49  
49T
27 59 59N - 
81m/81M/81R - 
Cold load  
Metering
Current  
Voltage Active/reactive/apparent power  
Energy P+, P-, Q1,…,Q4 Phi angle (φ)  
Thermal image accumulation  
Frequency  
Temperature
Voltage and current THD  
Control and supervision 
Automatic switch operation and control Blocking (86)  
Tripping coil supervision (TCS) Presence/absence of voltage  
Events log 4000 4000
Fault report 10 10
Oscillograph report 10 10
Configurable LED/LED 8/2 8/2
Tripping blocked by 2nd harmonic  
Recloser (79)  
Other automations
Web configuration  
 1 x micro-USB  1 x micro-USB
Front communication ports
 1 x RJ-45: web server (local access)  1 x RJ-45: web server (local access)
 2 x RS-485: Modbus-RTU or PROCOME  2 x RS-485: Modbus-RTU or PROCOME
 1 x RS-485: Temperature bus  1 x RS-485: Temperature bus
Rear communication ports
 1 x Ethernet: Modbus-TCP and remote  1 x Ethernet: Modbus-TCP and remote
web server web server
Communications: serial(2)
MODBUS-RTU PROCOME   
Communications: IP(2)
MODBUS-TCP
Notes: Configuration:
(1)
Calculated  Standard
(2)
Ask Ormazabal about other protocols (DNP3, IEC 60870-5-104, etc.) Optional
ANSI functions
27 - Minimum voltage protection
46 - Reverse sequence
46BC - Broken conductor detection
49 - Thermal overload
49T - Temperature trip
50 - Overcurrent instantaneous protection
50N - Earthing overcurrent instantaneous protection
50NS - Sensitive neutral overcurrent instantaneous protection
51 - Inverse time overcurrent protection
51N - Earthing overcurrent instantaneous protection
51NS - Inverse time sensitive neutral overcurrent protection
51G - Earthing timed overcurrent protection
59 - Overvoltage protection
59N - Residual overvoltage protection
67 - Overcurrent directional protection
67N - Neutral overcurrent directional protection
67NS - Sensitive neutral overcurrent directional protection
79 - Recloser (automatic recloser)
81m - Minimum frequency protection
81M - Maximum frequency protection
81R - Frequency drift protection
86 - Blocking protection
PWH - Zero-sequence wattmeter

www.ormazabal.com

CA-234-EN-2004