Chapter 1

CSS Tutorial
CSS is the key presentational technology that is used in website design.

CSS stands for Cascading Style Sheets. CSS is a standard style sheet language
used for describing the presentation (i.e. the layout and formatting) of the web
pages.

Prior to CSS, nearly all of the presentational attributes of HTML documents were
contained within the HTML markup (specifically inside the HTML tags); all the
font colors, background styles, element alignments, borders and sizes had to be
explicitly described within the HTML.

As a result, development of the large websites became a long and expensive

process, since the style information were repeatedly added to every single page
of the website.
 To solve this problem CSS was introduced in 1996 by the World Wide Web
Consortium (W3C), which also maintains its standard. CSS was designed to enable
the separation of presentation and content. Now web designers can move the
formatting information of the web pages to a separate style sheet which results
in considerably simpler HTML markup, and better maintainability.

CSS3 is the latest version of the CSS specification. CSS3 adds several new styling
features and improvements to enhance the web presentation capabilities.

Note: Our CSS tutorial will help you to learn the fundamentals of the latest CSS3
language, from the basic to advanced topics step-by-step. If you're a beginner,
start with the basic section and gradually move forward by learning a little bit
every day.

What You Can Do with CSS

There are lot more things you can do with CSS.

 You can easily apply same style rules on multiple elements.

 You can control the presentation of multiple pages of a website with a
single style sheet.
 You can present the same page differently on different devices.
 You can style dynamic states of elements such as hover, focus, etc. that
isn't possible otherwise.
 You can change the position of an element on a web page without
changing the markup.
 You can alter the display of existing HTML elements.
 You can transform elements like scale, rotate, skew, etc. in 2D or 3D space.
 You can create animations and transitions effects without using any
JavaScript.
 You can create print friendly version of your web pages.
 The list does not end here, there are many other interesting things that you can
do with CSS. You will learn about all of them in detail in upcoming chapters.

Advantages of Using CSS

The biggest advantage of CSS is that it allows the separation of style and layout
from the content of the document. Here are some more advantages, why one
should start using CSS?

 CSS Save Lots of Time — CSS gives lots of flexibility to set the style
properties of an element. You can write CSS once; and then the same code can
be applied to the groups of HTML elements, and can also be reused in multiple
HTML pages.
 Easy Maintenance — CSS provides an easy means to update the
formatting of the documents, and to maintain the consistency across multiple
documents. Because the content of the entire set of web pages can be easily
controlled using one or more style sheets.
 Pages Load Faster — CSS enables multiple pages to share the formatting
information, which reduces complexity and repetition in the structural contents of
the documents. It significantly reduces the file transfer size, which results in a
faster page loading.
 Superior Styles to HTML — CSS has much wider presentation capabilities
than HTML and provide much better control over the layout of your web pages.
So you can give far better look to your web pages in comparison to the HTML
presentational elements and attributes.
 Multiple Device Compatibility — CSS also allows web pages to be
optimized for more than one type of device or media. Using CSS the same HTML
document can be presented in different viewing styles for different rendering
devices such as desktop, cell phones, etc.

Tip: Now most of the HTML attributes are being deprecated and it's not

recommended to use. So it's a good idea to use as much CSS as possible to
increase the adaptability your website and make them compatible to future
browsers, as well.
What This Tutorial Covers
This CSS tutorial series covers all the fundamentals of CSS, including the idea of
selectors, methods of setting colors and backgrounds, way of formatting fonts
and text, styling UI elements such as hyperlinks, lists, tables, etc. as well as the
concept of CSS box model, and so on.

Once you're comfortable with the basics, you'll move on to next level that
explains the way of setting dimension and alignment of elements, methods for
positioning elements on a web page, using image sprites, as well as the concept
of relative and absolute units, visual formatting model, display and visibility,
layers, pseudo classes and elements, media dependent style sheets, and so on.

Finally, you'll explore some advanced features introduced in CSS3 like gradient
colors, drop shadow effect, 2D and 3D transforms, alpha transparency, as well as
the method of creating transition and animation effect, flex layouts, filter effect,
the concept of media queries, and more.

Tip: Every chapter in this tutorial contains lots of real-world examples that you
can try and test using an online editor. These examples will help you to better
understand the concept or topic. It also contains smart workarounds as well as
useful tips and important notes.
 Chapter 2

CSS Getting Started
A CSS file is simply a plain text file saved with the .css extension.

Getting Started with CSS

In this tutorial you'll learn how easy it is to add style and formatting information
to the web pages using CSS. But, before we begin, make sure that you have some
working knowledge of HTML.

If you're just starting out in the world of web development, start learning from
here »

Without further ado, let's get started with the Cascading Style Sheets (CSS).

Including CSS in HTML Documents

CSS can either be attached as a separate document or embedded in the HTML
document itself. There are three methods of including CSS in an HTML document:

 Inline styles — Using the style attribute in the HTML start tag.

 Embedded styles — Using the <style> element in the head section of a
document.
 External style sheets — Using the <link> element, pointing to an external
CSS file.

In this tutorial we will cover all these three methods for inserting CSS one by one.
Note: The inline styles have the highest priority, and the external style sheets
have the lowest. It means if you specify styles for an element in
both embedded and external style sheets, the conflicting style rules in the
embedded style sheet would override the external style sheet.

Inline Styles
Inline styles are used to apply the unique style rules to an element by putting the
CSS rules directly into the start tag. It can be attached to an element using
the style attribute.

The style attribute includes a series of CSS property and value pairs.

Each "property: value" pair is separated by a semicolon (;), just as you would write
into an embedded or external style sheets. But it needs to be all in one line i.e. no
line break after the semicolon, as shown here:

Example
Try this code »

<h1 style="color:red;font-size:30px;">This is a heading</h1>

<p style="color:green;font-size:22px;">This is a paragraph.</p>
<div style="color:blue;font-size:14px;">This is some text
content.</div>

Using the inline styles are generally considered as a bad practice. As style rules
are embedded directly inside the HTML tag, it causes the presentation to become
mixed with the content of the document; which makes the code hard to maintain
and negates the purpose of using CSS.

Note: It's become impossible to style pseudo-elements and pseudo-classes with

inline styles. You should, therefore, avoid the use of style attributes in your code.
Using external style sheets is the preferred way to add styles to the HTML
documents.

Embedded Style Sheets

Embedded or internal style sheets only affect the document they are embedded
in.

Embedded style sheets are defined in the <head> section of an HTML document

using the <style> element. You can define any number of <style> elements in an
HTML document but they must appear between the <head> and </head> tags. Let's
take a look at an example:

Example
Try this code »

<!DOCTYPE html>
<html lang="en">
<head>
<title>My HTML Document</title>
<style>
body{background-color: YellowGreen;}
p{color: #fff;}
</style>
</head>
<body>
<h1>This is a heading</h1>
<p>This is a paragraph of text.</p>
</body>
</html>

Tip: The type attribute of the <style> and <link> tag (i.e. type="text/css") defines

the language of the style sheet. This attribute is purely informative. You can omit
this since CSS is the standard and default style sheet language in HTML5.

External Style Sheets

An external style sheet is ideal when the style is applied to many pages of the
website.

An external style sheet holds all the style rules in a separate document that you
can link from any HTML file on your site. External style sheets are the most
flexible because with an external style sheet, you can change the look of an entire
website by changing just one file.

You can attach external style sheets in two ways — linking and importing.

Linking External Style Sheets

Before linking, we need to create a style sheet first. Let's open your favorite code
editor and create a new file. Now type the following CSS code inside this file and
save it as "style.css".

Example
Try this code »

body{
background: lightyellow;
font: 18px Arial, sans-serif;
}
h1{
color: orange;
}

An external style sheet can be linked to an HTML document using the <link> tag.

The <link> tag goes inside the <head> section, as you can see in the following
example:

Example
Try this code »

<!DOCTYPE html>
<html lang="en">
<head>
<title>My HTML Document</title>
<link rel="stylesheet"href="css/style.css">
</head>
<body>
<h1>This is a heading</h1>
<p>This is a paragraph of text.</p>
</body>
</html>
Tip: Among all the three methods, using external style sheet is the best method
for defining and applying styles to the HTML documents. As you can clearly see
with external style sheets, the affected HTML file require minimal changes in the
markup.

Importing External Style Sheets

The @import rule is another way of loading an external style sheet.
The @import statement instructs the browser to load an external style sheet and
use its styles.

You can use it in two ways. The simplest is within the header of your document.
Note that, other CSS rules may still be included in the <style> element. Here's an
example:

Example
Try this code »

<style>
@import url("css/style.css");
p{
color: blue;
font-size: 16px;
}
</style>

Similarly, you can use the @import rule to import a style sheet within another style
sheet.

Example
Try this code »

@import url("css/layout.css");
@import url("css/color.css");
body{
color: blue;
font-size: 14px;
}
Note: All @import rules must occur at the start of the style sheet. Any style rule
defined in the style sheet itself override the conflicting rules in the imported style
sheets. However, importing a style sheet within another style sheet is not
recommended due to performance issue.

Chapter 3

CSS Syntax
In this tutorial you will learn how to define CSS rules in your stylesheet.

Understanding CSS Syntax

A CSS stylesheet consists of a set of rules that are interpreted by the web browser
and then applied to the corresponding elements such as paragraphs, headings,
etc. in the document.

A CSS rule have two main parts, a selector and one or more declarations:

The selector specifies which element or elements in the HTML page the CSS rule
applies to.

Whereas, the declarations within the block determines how the elements are
formatted on a webpage. Each declaration consists of a property and a value
separated by a colon (:) and ending with a semicolon (;), and the declaration
groups are surrounded by curly braces {}.
The property is the style attribute you want to change; they could be font, color,
background, etc. Each property has a value, for example color property can have
value either blue or #0000FF etc.
h1 {color:blue; text-align:center;}

To make the CSS more readable, you can put one declaration on each line, like
this:

Example
Try this code »

h1{
color: blue;
text-align: center;
}

In the example above h1 is a selector, color and text-align are the CSS properties,

and the given blue and center are the corresponding values of these properties.

Note: A CSS declaration always ends with a semicolon ";", and the declaration
groups are always surrounded by the curly brackets "{}".

Writing Comments in CSS

Comments are usually added with the purpose of making the source code easier
to understand. It may help other developer (or you in the future when you edit
the source code) to understand what you were trying to do with the CSS.
Comments are significant to programmers but ignored by browsers.

A CSS comment begins with /*, and ends with */, as shown in the example below:

Example
Try this code »

/* This is a CSS comment */

h1{
color: blue;
text-align: center;
}
/* This is a multi-line CSS comment
that spans across more than one line */
p{
font-size: 18px;
text-transform: uppercase;
}

You can also comment out part of your CSS code for debugging purpose, as
shown here:

Example
Try this code »

h1{
color: blue;
text-align: center;
}
/*
p {
font-size: 18px;
text-transform: uppercase;
}
*/

Case Sensitivity in CSS

CSS property names and many values are not case-sensitive. Whereas, CSS
selectors are usually case-sensitive, for instance, the class selector .maincontent is
not the same as .mainContent.

Therefore, to be on safer side, you should assume that all components of CSS
rules are case-sensitive.

You will learn about the various types of CSS selectors in the next chapter.
 Chapter 4

CSS Selectors
In this tutorial you will learn how to use CSS selectors for applying style rules to
elements.

What is Selector?
A CSS selector is a pattern to match the elements on a web page. The style rules
associated with that selector will be applied to the elements that match the
selector pattern.

Selectors are one of the most important aspects of CSS as they allow you to
target specific elements on your web page in various ways so that they can be
styled.

Several types of selectors are available in CSS, let's take a closer look at them:

Universal Selector
The universal selector, denoted by an asterisk ( *), matches every single element
on the page.

The universal selector may be omitted if other conditions exist on the element.
This selector is often used to remove the default margins and paddings from the
elements for quick testing purpose.

Let's try out the following example to understand how it basically works:
Example
Try this code »

*{
margin: 0;
padding: 0;
}

The style rules inside the * selector will be applied to every element in a

document.

Note: It is recommended not to use the universal selector (*) too often in a

production environment, since this selector matches every element on a web
page that puts too much of unnecessary pressure on the browsers. Use element
type or class selector instead.

Element Type Selectors

An element type selector matches all instance of the element in the document
with the corresponding element type name. Let's try out an example to see how
it actually works:

Example
Try this code »

p{
color: blue;
}

The style rules inside the p selector will be applied on every <p> element (or

paragraph) in the document and color it blue, regardless of their position in the
document tree.
Id Selectors
The id selector is used to define style rules for a single or unique element.

The id selector is defined with a hash sign ( #) immediately followed by the id

value.

Example
Try this code »

#error{
color: red;
}

This style rule renders the text of an element in red, whose id attribute is set
to error.

Note: The value of an id attribute must be unique within a given document —

meaning no two elements in your HTML document can share the same id value.

Class Selectors
The class selectors can be used to select any HTML element that has
a class attribute. All the elements having that class will be formatted according to
the defined rule.

The class selector is defined with a period sign (.) immediately followed by the
class value.

Example
Try this code »

.blue{
color: blue;
}

The above style rules renders the text in blue of every element in the document
that has class attribute set to blue. You can make it a bit more particular. For
example:

Example
Try this code »

p.blue{
color: blue;
}

The style rule inside the selector p.blue renders the text in blue of only
those <p> elements that has class attribute set to blue, and has no effect on other
paragraphs.

Descendant Selectors
You can use these selectors when you need to select an element that is the
descendant of another element, for example, if you want to target only those
anchors that are contained within an unordered list, rather than targeting all
anchor elements. Let's see how it works:

Example
Try this code »

ul.menu li a{
text-decoration: none;
}
h1 em{
color: green;
}
The style rules inside the selector ul.menu li a applied to only those <a> elements
that contained inside an <ul> element having the class .menu, and has no effect on
other links inside the document.

Similarly, the style rules inside the h1 em selector will be applied to only
those <em> elements that contained inside the <h1> element and has not effect on
other <em> elements.

Child Selectors
A child selector is used to select only those elements that are the direct children
of some element.

A child selector is made up of two or more selectors separated by a greater than

symbol (>). You can use this selector, for instance, to select the first level of list
elements inside a nested list that has more than one level. Let's check out an
example to understand how it works:

Example
Try this code »

ul > li{
list-style: square;
}
ul > li ol{
list-style: none;
}

The style rule inside the selector ul > li applied to only those <li> elements that
are direct children of the <ul> elements, and has no effect on other list elements.

Adjacent Sibling Selectors

The adjacent sibling selectors can be used to select sibling elements (i.e. elements
at the same level). This selector has the syntax like: E1 + E2, where E2 is the target
of the selector.

The selector h1 + p in the following example will select the <p> elements only if
both the <h1> and <p> elements share the same parent in the document tree
and <h1> is immediately precedes the <p> element. That means only those
paragraphs that come immediately after each <h1> heading will have the
associated style rules. Let's see how this selector actually works:

Example
Try this code »

h1 + p{
color: blue;
font-size: 18px;
}
ul.task + p{
color: #f0f;
text-indent: 30px;
}

General Sibling Selectors

The general sibling selector is similar to the adjacent sibling selector (E1 + E2),
but it is less strict. A general sibling selector is made up of two simple selectors
separated by the tilde (∼) character. It can be written like: E1 ∼ E2, where E2 is the
target of the selector.

The selector h1 ∼ p in the example below will select all the <p> elements that
preceded by the <h1> element, where all the elements share the same parent in
the document tree.

Example
Try this code »

h1 ∼ p{
color: blue;
font-size: 18px;
}
ul.task ∼ p{
color: #f0f;
text-indent: 30px;
}

There are more sophisticated selectors like attribute selectors, pseudo-

classes, pseudo-elements. We will discuss about these selectors in detail in the
upcoming chapters.

Grouping Selectors
Often several selectors in a style sheet share the same style rules declarations.
You can group them into a comma-separated list to minimize the code in your
style sheet. It also prevents you from repeating the same style rules over and over
again. Let's take a look:

Example
Try this code »

h1{
font-size: 36px;
font-weight: normal;
}
h2{
font-size: 28px;
font-weight: normal;
}
h3{
font-size: 22px;
font-weight: normal;
}
As you can see in the above example, the same style rule font-weight: normal; is
shared by the selectors h1, h2 and h3, so it can be grouped in a comma-separated
list, like this:

Example
Try this code »

h1, h2, h3{

font-weight: normal;
}
h1{
font-size: 36px;
}
h2{
font-size: 28px;
}
h3{
font-size: 22px;
}
 Chapter 5

CSS Color
In this tutorial you will learn the different methods of defining color values in CSS.

Setting Color Property

The color property defines the text color (foreground color in general) of an
element.

For instance, the color property specified in the body selector defines the default

text color for the whole page. Let's try out the following example to see how it
works:

Example
Try this code »

body{
color: #ff5722;
 }
Note: The color property normally inherits the color value from their parent
element, except the case of anchor elements. For example, if you specify color for
the body element it will automatically be passed down to the headings,
paragraphs, etc.

Defining Color Values

Colors in CSS most often specified in the following formats:

 a color keyword - like "red", "green", "blue", "transparent", etc.

 a HEX value - like "#ff0000", "#00ff00", etc.
 an RGB value - like "rgb(255, 0, 0)"

CSS3 has introduced several other color formats such as HSL, HSLA and RGBA
that also support alpha transparency. We'll learn about them in greater detail
in CSS3 color chapter.

For now, let's stick to the basic methods of defining the color values:

Color Keywords
CSS defines the few color keywords which lets you specify color values in an easy
way.

These basic color keywords are: aqua, black, blue, fuchsia, gray, green, lime,
maroon, navy, olive, purple, red, silver, teal, white, and yellow. The color names
are case-insensitive.

Example
Try this code »

h1{
color: red;
}
p{
color: purple;
}

Modern web browsers however practically support many more color names than
what are defined in the CSS standard, but to be on the safer side you should use
hex color values instead.

See the reference on CSS color names, for a complete list of possible color
names.

HEX Color Values

Hex (short for Hexadecimal) is by far the most commonly used method of
defining color on the web.

Hex represent colors using a six-digit code, preceded by a hash character,

like #rrggbb, in which rr, gg, and bb represents the red, green and blue component
of the color respectively.

The value of each component can vary from 00 (no color) and FF (full color) in
hexadecimal notation, or 0 and 255 in decimal equivalent notation.
Thus #ffffff represents white color and #000000 represents black color. Let's take a
look the following example:

Example
Try this code »

h1{
color: #ffa500;
}
p{
color: #00ff00;
}
Note: Hexadecimal or Hex refers to a numbering scheme that uses 16 characters
as its base. It uses the numbers 0 through 9 and the letters A, B, C, D, E and F
which corresponds to the decimal numbers 10, 11, 12, 13, 14 and 15 respectively.

Tip: If hexadecimal code of a color has value pairs, it can also be written in
shorthand notation to avoid extra typing, for example, the hex color value #ffffff
can be also be written as #fff, #000000 as #000, #00ff00 as #0f0, #ffcc00 as #fc0,
and so on.

RGB Color Values

Colors can be defined in the RGB model (Red, Green, and Blue) using
the rgb() functional notation.

The rgb() function accepts three comma-separated values, which specify the

amount of red, green, and blue component of the color. These values are
commonly specified as integers between 0 to 255, where 0 represent no color and
255 represent full or maximum color.

The following example specifies the same color as in the previous example but in
RGB notation.

Example
Try this code »

h1{
color:rgb(255, 165, 0);
}
p{
color:rgb(0, 255, 0);
}

Note: You can also specify RGB values inside the rgb() function in percentage,

where 100% represents full color, and 0% (not simply 0) represents no color. For
example, you can specify the red color either as rgb(255, 0, 0) or rgb(100%, 0%, 0%).
Tip: If R, G, and B are all set to 255, i.e. rgb(255, 255, 255), the color would be
white. Likewise, if all channels are set to 0, i.e. rgb(0, 0, 0), the color would be
black. Play with the RGB values in the following demonstration to understand
how it actually works.

Effect of Color Property on Borders and Outlines

The color property is not just for text content, but for anything in the foreground
that takes a color value. For instance, if border-color or outline-color value hasn't
been defined explicitly for the element, the color value will be used instead. Let's
check out an example:

Example
Try this code »

p.one{
color: #0000ff;
border: 2px solid;
}
p.two{
color: #00ff00;
outline: 2px solid;
}
 Chapter 6

CSS Background
In this tutorial you will learn how to define background styles for an element
using CSS.

Setting Background Properties

Background plays an important role in the visual presentation of a web page.
 CSS provide several properties for styling the background of an element,
including coloring the background, placing images in the background and
managing their positioning, etc.

The background properties are background-color, background-image, background-

repeat, background-attachment and background-position.

In the following section we will discuss each of these properties in more detail.

Background Color
The background-color property is used to set the background color of an element.

The following example demonstrates how to set the background color of the
whole page.

Example
Try this code »

body{
background-color: #f0e68c;
}

Color values in CSS are most often specified in the following formats:

 a color name - like "red"

 a HEX value - like "#ff0000"
 an RGB value - like "rgb(255, 0, 0)"

Please check out the tutorial on CSS color to learn more about specifying color
values.

Background Image
The background-image property set an image as a background of an HTML element.
Let's check out the following example which sets the background image for the
whole page.

Example
Try this code »

body{
background-image:url("images/tile.png");
}

Note: When applying the background image to an element, make sure that the
image you choose does not affect the readability of the element's text content.

Tip: By default browser repeats or tiles the background image both horizontally
and vertically to fill the entire area of an element. You can control this
with background-repeat property.

Background Repeat
The background-repeat property allows you to control how a background image is
repeated or tiled in the background of an element. You can set a background
image to repeat vertically (y-axis), horizontally (x-axis), in both directions, or in
neither direction.

Let's try out the following example which demonstrates how to set the gradient
background for a web page by repeating the sliced image horizontally along the
x-axis.

Example
Try this code »

body{
background-image:url("images/gradient.png");
background-repeat: repeat-x;
}
Similarly, you can use the value repeat-y to repeat the background image
vertically along the y-axis, or the value no-repeat to prevent the repetition
altogether.

Example
Try this code »

body{
background-image:url("images/texture.png");
background-repeat: no-repeat;
}
Let's take a look at the following illustration to understand how this property
actually works.

Background Position
The background-position property is used to control the position of the background
image.

If no background position has been specified, the background image is placed at

the default top-left position of the element i.e. at (0,0), let's try out the following
example:

Example
Try this code »
body{
background-image:url("images/robot.png");
background-repeat: no-repeat;
}
In the following example, the background image is positioned at top-right corner.

Example
Try this code »

body{
background-image:url("images/robot.png");
background-repeat: no-repeat;
background-position: right top;
}
Note: If two values are specified for the background-position property, the first
value represents the horizontal position, and the second represents the vertical
position. If only one value is specified, the second value is assumed to be center.

Besides keywords, you can also use percentage or length values, such
as px or em for this property.

Let's take a look at the following illustration to understand how this property
actually works.
Background Attachment
The background-attachment property determines whether the background image is
fixed with regard to the viewport or scrolls along with the containing block.

Let's try out the following example to understand how it basically works:

Example
Try this code »

body{
background-image:url("images/bell.png");
background-repeat: no-repeat;
background-attachment: fixed;
}
The Background Shorthand Property
As you can see in the examples above, there are many properties to consider
when dealing with the backgrounds. However, it is also possible to specify all
these properties in one single property to shorten the code or avoid extra typing.
This is called a shorthand property.

The background property is a shorthand property for setting all the individual

background properties, i.e., background-color, background-image, background-
repeat, background-attachment and the background-position property at once. Let's see
how this works:

Example
Try this code »

body{
background-color: #f0e68c;
background-image:url("images/smiley.png");
background-repeat: no-repeat;
background-attachment: fixed;
background-position: 250px 25px;
}

Using the shorthand notation the above example can be written as:

Example
Try this code »

body{
background: #f0e68c url("images/smiley.png") no-repeat fixed
250px 25px;
}

When using the background shorthand property the order of the property values

should be.

background: color image repeat attachment position;
If the value for an individual background property is missing or not specified
while using the shorthand notation, the default value for that property will be
used instead, if any.

Note: The background properties do not inherit like the color property, but the

parent element's background will be visible through by default, because of the
initial or default transparent value of the background-color CSS property.

Chapter 7

CSS Fonts
In this tutorial you will learn how to style fonts on a web page using CSS.

Styling Fonts with CSS

Choosing the right font and style is very crucial for the readability of text on a
page.

CSS provide several properties for styling the font of the text, including changing
their face, controlling their size and boldness, managing variant, and so on.

The font properties are: font-family, font-style, font-weight, font-size, and font-

variant.

Let's discuss each of these font properties one by one in more detail.

Font Family
The font-family property is used to specify the font to be used to render the text.

This property can hold several comma-separated font names as a fallback system,

so that if the first font is not available on the user's system, browser tries to use
the second one, and so on.

Hence, list the font that you want first, then any fonts that might fill in for the first
if it is not available. You should end the list with a generic font family which are
five — serif, sans-serif, monospace, cursive and fantasy. A typical font family
declaration might look like this:

Example
Try this code »

body{
font-family: Arial, Helvetica, sans-serif;
}

Note: If the name of a font family contains more than one word, it must be
placed inside quotation marks, like "Times New Roman", "Courier New", "Segoe UI", etc.

The most common font families used in web design are serif and sans-serif,

because they are more suitable for reading. While monospace fonts are
commonly used to display code, because in this typeface each letter takes up the
same space which looks like typewritten text.

The cursive fonts look like cursive writing or handwriting. The fantasy font

represents artistic font, but they're not used widely because of poor availability
across the operating systems.

Difference Between Serif and Sans-serif Fonts

Serif fonts have small line or stroke at the extremities of characters, whereas sans-
serif fonts are straighter and do not have these small strokes. See the following
illustration.

To learn about commonly used font combinations, please check out the
reference on web safe fonts.

Font Style
The font-style property is used to set the font face style for the text content of an
element.

The font style can be normal, italic or oblique. The default value is normal.

Let's try out the following example to understand how it basically works:
Example
Try this code »

p.normal{
font-style: normal;
}
p.italic{
font-style: italic;
}
p.oblique{
font-style: oblique;
}

Note: At first glance both oblique and italic font styles appear the same thing,
but there is a difference. The italic style uses an italic version of the font
while oblique style on the other hand is simply a slanted or sloped version of the
normal font.

Font Size
The font-size property is used to set the size of font for the text content of an
element.

There are several ways to specify the font size values e.g. with keywords,
percentage, pixels, ems, etc.

Setting Font Size with Pixels

Setting the font size in pixel values (e.g. 14px, 16px, etc.) is a good choice when
you need the pixel accuracy. Pixel is an absolute unit of measurement which
specifies a fixed length.

Let's try out the following example to understand how it basically works:

Example
Try this code »
h1{
font-size: 24px;
}
p{
font-size: 14px;
}

Defining the font sizes in pixel is not considered very accessible, because the user
cannot change the font size from the browser settings. For instance, users with
limited or low vision may wish to set the font size much larger than the size
specified by you.

Therefore, you should avoid using the pixels values and use the values that are
relative to the user's default font size instead if you want to create an inclusive
design.

Tip: The text can also be resized in all browsers using the zoom feature. However,
this feature resizes the entire page, not just the text. The W3C recommends using
the em or percentage (%) values in order to create more robust and scalable
layouts.

Setting Font Size with EM

The em unit refers to the font size of the parent element. When defining the font-
size property, 1em is equal to the size of the font that applies to the parent of the
element.

So, if you set a font-size of 20px on the body element, then 1em = 20px and 2em = 

40px.

However, if you haven't set the font size anywhere on the page, then it is the
browser default, which is normally 16px. Therefore, by default 1em = 16px, and 2em 
= 32px.

Let's take a look at the following example to understand how it basically works:

Example
Try this code »

h1{
font-size: 2em;/* 32px/16px=2em */
}
p{
font-size: 0.875em;/* 14px/16px=0.875em */
}

Using the Combination of Percentage and EM

As you've observed in the above example the calculation of em values doesn't
look straightforward. To simplify this, a popular technique is to set the font-
size for the body element to 62.5% (that is 62.5% of the default 16px), which
equates to 10px, or 0.625em.

Now you can set the font-size for any elements using em units, with an easy-to-
remember conversion, by dividing the px value by 10. This way 10px = 1em, 12px = 
1.2em, 14px = 1.4em, 16px = 1.6em, and so on. Let's take a look at the following
example:

Example
Try this code »

body{
font-size: 62.5%;/* font-size 1em = 10px */
}
p{
font-size: 1.4em;/* 1.4em = 14px */
}
p span{
font-size: 2em;/* 2em = 28px */
}

Setting Font Size with Root EM

To make things even more simpler CSS3 has introduced rem unit (short for "root
em") which is always relative to the font-size of the root element ( html), regardless
of where the element lies in the document (unlike em which is relative to parent
element's font size).

This means that 1rem is equivalent to the font size of the html element, which

is 16px by default in most browsers. Let's try out an example to understand how it
actually works:
Example
Try this code »

html{
font-size: 62.5%;/* font-size 1em = 10px */
}
p{
font-size: 1.4rem;/* 1.4rem = 14px */
}
p span{
font-size: 2rem;/* 2rem = 20px (not 28px) */
}

Setting Font Size with Keywords

CSS provide several keywords that you can use to define font sizes.

An absolute font size can be specified using one of the following keywords: xx-
small, x-small, small, medium, large, x-large, xx-large. Whereas, a relative font size can
be specified using the keywords: smaller or larger. Let's try out an example and
see how it works:

Example
Try this code »

body{
font-size: large;
}
h1{
font-size: larger;
}
p{
font-size: smaller;
}

Note: The keyword medium is equivalent to the browsers default font-size, which is

normally 16px. Likewise, xx-small is the equivalent of 9 pixels, x-small is 10 pixels,
small is 13 pixels, large is 18 pixels, x-large is 24 pixels, and xx-large is 32 pixels.
Tip: By setting a font size on the body element, you can set the relative font
sizing everywhere else on the page, giving you the ability to easily scale the font
size up or down accordingly.

Setting Font Size with Viewport Units

The font sizes can be specified using viewport units such as vw or vh.

Viewport units refer to a percentage of the browser's viewport dimensions, where

1vw = 1% of viewport width, and 1vh = 1% of viewport height. Hence, if the
viewport is 1600px wide, 1vw is 16px.

Try out the following example by resizing the browser window and see how it
works:

Example
Try this code »

body{
font-size: 1vw;
}
h1{
font-size: 3vw;
}

However, there is a problem with the viewport units. On small screens fonts
become so small that they are hardly readable. To prevent this you can utilize
CSS calc() function, like this:

Example
Try this code »

html{
font-size:calc(1em + 1vw);
}
h1{
font-size: 3rem;
}
 In this example, even if the viewport width becomes 0, the font-size would be at
least 1em or 16px.

You further utilize CSS media queries to create better responsive and fluid
typography.

Font Weight
The font-weight property specifies the weight or boldness of the font.

This property can take one of the following

values: normal, bold, bolder, lighter, 100, 200, 300, 400, 500, 600, 700, 800, 900 and inherit.

 The numeric values 100-900 specify the font weights, where each number

represents a weight greater than its predecessor. 400 is same as normal & 700 is
same as bold.
 The bolder and lighter values are relative to the inherited font weight,
while the other values such as normal and bold are absolute font weights.

Let's try out an example to understand how this property basically works:

Example
Try this code »

p{
font-weight: bold;
}

Note: Most of the fonts are only available in a limited number of weights; often
they are available only in normal and bold. In case, if a font is not available in the
specified weight, an alternate will be chosen that is the closest available weight.
Font Variant
The font-variant property allows the text to be displayed in a special small-caps
variation.

Small-caps or small capital letters are slightly different to normal capital letters, in

which lowercase letters appear as smaller versions of the corresponding
uppercase letters.

Try out the following example to understand how this property actually works:

Example
Try this code »

p{
font-variant: small-caps;
}

The value normal removes small caps from the text which is already formatted that
way.

Chapter 8
CSS Text
In this tutorial you will learn how to style text on your web pages using CSS.

Formatting Text with CSS

CSS provides several properties that allows you to define various text styles such
as color, alignment, spacing, decoration, transformation, etc. very easily and
effectively.

The commonly used text properties are: text-align, text-decoration, text-

transform, text-indent, line-height, letter-spacing, word-spacing, and more. These
properties give you precise control over the visual appearance of
the characters, words, spaces, and so on.

Let's see how to set these text properties for an element in more detail.

Text Color
The color of the text is defined by the CSS color property.

The style rule in the following example will define the default text color for the
page

Example
Try this code »

body{
color: #434343;
}

Although, the color property seems like it would be a part of the CSS text, but it
is actually a standalone property in CSS. See the tutorial on CSS color to learn
more about the color property.

Text Alignment
The text-align property is used to set the horizontal alignment of the text.

Text can be aligned in four ways: to the left, right, centre or justified (straight left
and right margins).

Let's take a look at an example to understand how this property basically works.

Example
Try this code »

h1{
text-align: center;
}
p{
text-align: justify;
}

Note: When text-align is set to justify, each line is stretched so that every line

has equal width (except the last line), and the left and right margins are straight.
This alignment is generally used in publications such as magazines and
newspapers.

Let's take a look at the following illustration to understand what these values
actually mean.
Text Decoration
The text-decoration property is used to set or remove decorations from text.

This property typically accepts one of the following

values: underline, overline, line-through, and none. You should avoid underline text
that is not a link, as it might confuse the visitor.

Let's try out the following example to understand how it basically works:

Example
Try this code »

h1{
text-decoration: overline;
}
h2{
text-decoration: line-through;
}
h3{
text-decoration: underline;
}

Removing the Default Underline from Links

The text-decoration property is extensively used to remove the default underline
from the HTML hyperlinks. You can further provide some other visual cues to
make it stand out from the normal text, for example, using dotted border instead
of solid underline.

Let's take a look at the following example to understand how it basically works:

Example
Try this code »

a{
text-decoration: none;
border-bottom: 1px dotted;
}
Note: When you create an HTML link, browsers built in style sheet automatically
underline it and applies a blue color, so that the readers can clearly see which text
is clickable.

Text Transformation
The text-transform property is used to set the cases for a text.

Text are often written in mixed case. However, in certain situations you may want
to display your text in entirely different case. Using this property you can change
an element's text content into uppercase or lowercase letters, or capitalize the
first letter of each word without modifying the original text.

Let's try out the following example to understand how it basically works:

Example
Try this code »

h1{
text-transform: uppercase;
}
h2{
text-transform: capitalize;
}
h3{
text-transform: lowercase;
}

Text Indentation
The text-indent property is used to set the indentation of the first line of text
within a block of text. It is typically done by inserting the empty space before the
first line of text.
The size of the indentation can be specified using percentage (%), length values
in pixels, ems, etc.

The following style rule will indent the first line of the paragraphs by 100 pixels.

Example
Try this code »

p{
text-indent: 100px;
}

Note: Whether the text is indented from the left or from the right depends on the

direction of text inside the element, defined by the CSS direction property.

Letter Spacing
The letter-spacing property is used to set extra spacing between the characters of
text.

This property can take a length value in pixels, ems, etc. It may also accept
negative values. When setting letter spacing, a length value indicates spacing in
addition to the default inter-character space.

Let's check out the following example to understand how it really works:

Example
Try this code »

h1{
letter-spacing: -3px;
}
p{
letter-spacing: 10px;
}
Word Spacing
The word-spacing property is used to specify additional spacing between the
words.

This property can accept a length value in pixels, ems, etc. Negative values are
also allowed.

Let's try out the following example to understand how this property works:

Example
Try this code »

p.normal{
word-spacing: 20px;
}
p.justified{
word-spacing: 20px;
text-align: justify;
}
p.preformatted{
word-spacing: 20px;
white-space: pre;
}

Note: Word spacing can be affected by text justification. Also, even though

whitespace is preserved, spaces between words are affected by the word-
spacing property.

Line Height
The line-height property is used to set the height of the text line.

It is also called leading and commonly used to set the distance between lines of

text.
The value of this property can be a number, a percentage (%), or a length in
pixels, ems, etc.

Example
Try this code »

p{
line-height: 1.2;
}

When the value is a number, the line height is calculated by multiplying the
element's font size by the number. While, percentage values are relative to the
element's font size.

Note: Negative values for the line-height property are not allowed. This property

is also a component of the CSS font shorthand property.

If the value of the line-height property is greater than the value of the font-

size for an element, this difference (called the "leading") is cut in half (called
the "half-leading") and distributed evenly on the top and bottom of the in-line
box. Let's check out an example:

Example
Try this code »

p{
font-size: 14px;
line-height: 20px;
background-color: #f0e68c;
}
See the tutorial on CSS3 text overflow in the advanced section to learn how to
handle overflowed text. Also see the CSS3 text shadow section to learn how to
apply shadow effect on text.
 Chapter 9

CSS Links
 In this tutorial you will learn how to style different states of a link using CSS.

Styling Links with CSS

Links or hyperlinks are an essential part of a website. It allows visitors to navigate through the
site. Therefore styling the links properly is an important aspect of building a user-friendly
website.
See the tutorial on HTML links to learn more about links and how to create them.
A link has four different states — link, visited, active and hover. These four states of a link
can be styled differently through using the following anchor pseudo-class selectors.
 a:link — define styles for normal or unvisited links.
 a:visited — define styles for links that the user has already visited.
 a:hover — define styles for a link when the user place the mouse pointer over it.
 a:active — define styles for links when they are being clicked.

You can specify any CSS property you'd like e.g. color, font, background, border, etc. to each
of these selectors to customize the style of links, just like you do with the normal text.

Example
Try this code »

a:link{/* unvisited link */

color: #ff0000;
text-decoration: none;
border-bottom: 1px solid;
}
a:visited{/* visited link */
color: #ff00ff;
}
a:hover{/* mouse over link */
color: #00ff00;
border-bottom: none;
}
a:active{/* active link */
color: #00ffff;
}

The order in which you are setting the style for different states of links is important, because
what defines last takes precedence over the style rules defined earlier.
 Note: In general, the order of the pseudo classes should be the following
— :link, :visited, :hover, :active, :focus in order for these to work properly.

Modifying Standard Link Styles

In all major web browsers such as Chrome, Firefox, Safari, etc. links on the web pages have
underlines and uses the browser's default link colors, if you do not set the styles exclusively for
them.
By default, text links will appear as follow in most of the browsers:
 An unvisited link as underlined blue text.
 A visited link as underlined purple text.
 An active link as underlined red text.

However, there is no change in the appearance of link in case of the hover state. It remains blue,
purple or red depending on which state (i.e. unvisited, visited or active) they are in.
Now let's see how to customize the links by overriding its default styling.

Setting Custom Color of Links

Simply use the CSS color property to define the color of your choice for different state of a link.
But when choosing colors make sure that user can clearly differentiate between normal text and
links.
Let's try out the following example to understand how it basically works:

Example
Try this code »

a:link{
color: #1ebba3;
}
a:visited{
color: #ff00f4;
}
a:hover{
color: #a766ff;
}
a:active{
color: #ff9800;
}

Removing the Default Underline from Links

If you don't like the default underline on links, you can simply use the CSS text-
decoration property to get rid of it. Alternatively, you can apply other styling on links like
background color, bottom border, bold font, etc. to make it stand out from the normal text a little
better.
The following example shows how to remove or set underline for different states of a link.

Example
Try this code »

a:link, a:visited{
text-decoration: none;
}
a:hover, a:active{
text-decoration: underline;
}

Making Text Links Look Like Buttons

You can also make your ordinary text links look like button using CSS. To do this we need to
utilize few more CSS properties such as background-color, border, display, padding, etc. You
will learn about these properties in detail in upcoming chapters.
Let's check out the following example and see how it really works:

Example
Try this code »

a:link, a:visited{
color: white;
background-color: #1ebba3;
display: inline-block;
padding: 10px 20px;
border: 2px solid #099983;
text-decoration: none;
text-align: center;
font: 14px Arial, sans-serif;
}
a:hover, a:active{
background-color: #9c6ae1;
border-color: #7443b6;
}

Chapter 10

CSS Lists
 In this tutorial you will learn how to format HTML lists using CSS.

Types of HTML Lists

There are three different types of list in HTML:

 Unordered lists — A list of items, where every list items are marked with
bullets.
 Ordered lists — A list of items, where each list items are marked with
numbers.
 Definition list — A list of items, with a description of each item.

See the tutorial on HTML lists to learn more about the lists and how to create
them.

Styling Lists with CSS

CSS provides the several properties for styling and formatting the most
commonly used unordered and ordered lists. These CSS list properties typically
allow you to:

 Control the shape or appearance of the marker.

 Specify an image for the marker rather than a bullet point or number.
 Set the distance between a marker and the text in the list.
 Specify whether the marker would appear inside or outside of the box
containing the list items.

In the following section we will discuss the properties that can be used to style
HTML lists.

Changing the Marker Type of Lists

By default, items in an ordered list are numbered with Arabic numerals (1, 2, 3, 5,
and so on), whereas in an unordered list, items are marked with round bullets (•).

But, you can change this default list marker type to any other type such as roman
numerals, latin letters, circle, square, and so on using the list-style-type property.
Let's try out the following example to understand how this property actually
works:

Example
Try this code »

ul{
list-style-type: square;
}
ol{
list-style-type: upper-roman;
}

Changing the Position of List Markers

By default, markers of each list items are positioned outside of their display boxes.

However, you can also position these markers or bullet points inside of the list
item's display boxes using the list-style-position property along with the
value inside. In this case the lines will wrap under the marker instead of being
indented. Here's an example:

Example
Try this code »

ol.in li{
list-style-position: inside;
}
ol.out li{
list-style-position: outside;
}

Let's take a look at the following illustration to understand how markers or

bullets are positioned.
Using Images as List Markers
You can also set an image as a list marker using the list-style-image property.

The style rule in the following example assigns a transparent PNG image
"arrow.png" as the list marker for all the items in the unordered list. Let's try it out
and see how it works:

Example
Try this code »

ul li{
list-style-image:url("images/bullet.png");
}

Sometimes, the list-style-image property may not produce the expected output.

Alternatively, you can use the following solution for better control over the
positioning of image markers.

As a work-around, you can also set image bullets via the background-image CSS

property. First, set the list to have no bullets. Then, define a non-repeating
background image for the list element.

The following example displays the image markers equally in all browsers:

Example
Try this code »
ul{
list-style-type: none;
}
ul li{
background-image:url("images/bullet.png");
background-position: 0px 5px;/* X-pos Y-pos (from top-left) */
background-repeat: no-repeat;
padding-left: 20px;
}

Setting All List Properties At Once

The list-style property is a shorthand property for defining all the three
properties list-style-type, list-style-image, and list-style-position of a list in one
place.

The following style rule sets all the list properties in a single declaration.

Example
Try this code »

ul{
list-style: square inside url("images/bullet.png");
}

Note: When using the list-style shorthand property, the orders of the values

are: list-style-type | list-style-position | list-style-image. It does not matter if one
of the values above is missing as long as the rest are in the specified order.

Creating Navigation Menus Using Lists

HTML lists are frequently used to create horizontal navigation bar or menu that
typically appear at the top of a website. But since the list items are block
elements, so to display them inline we need to use the CSS display property. Let's
try out an example to see how it really works:

Example
Try this code »

ul{
padding: 0;
list-style: none;
background: #f2f2f2;
}
ul li{
display: inline-block;
}
ul li a{
display: block;
padding: 10px 25px;
color: #333;
text-decoration: none;
}
ul li a:hover{
color: #fff;
background: #939393;
}

You will learn about the CSS display and padding properties in detail in

upcoming chapters.

Chapter 11
CSS Tables
In this tutorial you will learn how to style HTML tables with CSS.

Styling Tables with CSS

Tables are typically used to display tabular data, such as financial reports.

But when you create an HTML table without any styles or attributes, browsers
display them without any border. With CSS you can greatly improve the
appearance your tables.

CSS provides several properties that allow you to control the layout and
presentation of the table elements. In the following section you will see how to
use CSS to create elegant and consistent tables.

Adding Borders to Tables

The CSS border property is the best way to define the borders for the tables.

The following example will set a black border for the <table>, <th>,

and <td> elements.

Example
Try this code »

table, th, td{

border: 1px solid black;
}

By default, browser draws a border around the table, as well as around all the
cells, with some space in-between, which results in double border. To get rid of
this double border problem you can simply collapse the adjoining table cell
borders and create clean single line borders.
Let's take a look at the following illustration to understand how a border is
applied to a table.

Collapsing Table Borders

There are two distinct models for setting borders on table cells in
CSS: separate and collapse.

In the separate border model, which is the default, each table cell has its own
distinct borders, whereas in the collapsed border model, adjacent table cells
share a common border. You can set the border model for an HTML table by
using the CSS border-collapse property.

The following style rules will collapse the table cell borders and apply one pixel
black border.

Example
Try this code »

table{
border-collapse: collapse;
}
th, td{
border: 1px solid black;
}

Note: You can also remove the space between the table cell borders through
setting the value of CSS border-spacing property to 0. However, it only removes
the space but do not merge the borders like when you set the border-
collapse to collapse.

Adjusting Space inside Tables

By default, the browser creates the table cells just large enough to contain the
data in the cells.

To add more space between the table cell contents and the cell borders, you can
simply use the CSS padding property. Let's try out the following example and see
how it works:

Example
Try this code »

th, td{
padding: 15px;
}

You can also adjust the spacing between the borders of the cells using the
CSS border-spacing property, if the borders of your table are separated (which is
default).

The following style rules apply the spacing of 10 pixels between all borders within
a table:

Example
Try this code »

table{
border-spacing: 10px;
}
 Setting Table Width and Height
By default, a table will render just wide and tall enough to contain all of its
contents.

However, you can also set the width and height of the table as well as its cells
explicitly using the width and height CSS property. The style rules in the
following example will sets the width of the table to 100%, and the height of the
table header cells to 40px.

Example
Try this code »

table{
width: 100%;
}
th{
height: 40px;
}

Controlling the Table Layout

A table expands and contracts to accommodate the data contained inside it. This
is the default behavior. As data fills inside the table, it continues to expand as
long as there is space. Sometimes, however, it is necessary to set a fixed width for
the table in order to manage the layout.

You can do this with the help of CSS table-layout property. This property

defines the algorithm to be used to layout the table cells, rows, and columns. This
property takes one of two values:

 auto — Uses an automatic table layout algorithm. With this algorithm, the
widths of the table and its cells are adjusted to fit the content. This is the default
value.
 fixed — Uses the fixed table layout algorithm. With this algorithm, the
horizontal layout of the table does not depend on the contents of the cells; it
only depends on the table's width, the width of the columns, and borders or cell
spacing. It is normally faster than auto.

The style rules in the following example specify that the HTML table is laid out
using the fixed layout algorithm and has a fixed width of 300 pixels. Let's try it
out and see how it works:

Example
Try this code »

table{
width: 300px;
table-layout: fixed;
}

Tip: You can optimize the table rendering performance by specifying the

value fixed for the table-layout property. Fixed value of this property causes
the table to be rendered one row at a time, providing users with information at a
faster pace.

Note: Without fixed value of the table-layout property on large tables, users

won't see any part of the table until the browser has rendered the whole table.

Aligning the Text Inside Table Cells

You can align text content inside the table cells either horizontally or vertically.

Horizontal Alignment of Cell Contents

For horizontal alignment of text inside the table cells you can use the text-
align property in the same way as you use with other elements. You align text to
either left, right, center or justify.

The following style rules will left-align the text inside the <th> elements.
Example
Try this code »

th{
text-align: left;
}

Note: Text inside the <td> elements are left-aligned by default, whereas the text

inside the <th> elements are center-aligned and rendered in bold font by default.

Vertical Alignment of Cell Contents

Similarly, you can vertically align the content inside the <th> and <td> elements
to top, bottom, or middle using the CSS vertical-align property. The default
vertical alignment is middle.

The following style rules will vertically bottom-align the text inside
the <th> elements.

Example
Try this code »

th{
height: 40px;
vertical-align: bottom;
}

Controlling the Position of Table Caption

You can set the vertical position of a table caption using the CSS caption-
side property.

The caption can be placed either at the top or bottom of the table. The default
position is top.
Example
Try this code »

caption{
caption-side: bottom;
}

Tip: To change the horizontal alignment of the table's caption text (e.g. left or
right), you can simply use the CSS text-align property, like you do with normal
text.

Handling Empty Cells

In tables that uses separate border model, which is default, you can also control
the rendering of the cells that have no visible content using the empty-cells CSS
property.

This property accepts a value of either show or hide. The default value is show,

which renders empty cells like normal cells, but if the value hide is specified no
borders or backgrounds are drawn around the empty cells. Let's try out an
example to understand how it really works:

Example
Try this code »

table{
border-collapse: separate;
empty-cells: hide;
}

Note: Placing a non-breaking space (&nbsp;) inside a table cell make it non-

empty. Therefore, even if that cell looks empty the hide value will not hide the
borders and backgrounds.
Creating Zebra-striped Tables
Setting different background colors for alternate rows is a popular technique to
improve the readability of tables that has large amount of data. This is commonly
known as zebra-striping a table.

You can simply achieve this effect by using the CSS :nth-child() pseudo-

class selector.

The following style rules will highlight every odd rows within the table body.

Example
Try this code »

tbody tr:nth-child(odd){
background-color: #f2f2f2;
}

A zebra-striped table typically looks something like the following picture.

Note: The :nth-child() pseudo-class select elements based on their position in

a group of siblings. It can take a number, a keyword even or odd, or an
expression of the form xn+y where x and y are integers (e.g. 1n, 2n, 2n+1, ...) as
an argument.
Making a Table Responsive
Tables are not responsive in nature. However, to support mobile devices you can
add responsiveness to your tables by enabling horizontal scrolling on small
screens. To do this simply wrap your table with a <div> element and apply the
style overflow-x: auto; as shown below:

Example
Try this code »

<div style="overflow-x: auto;">

<table>
... table content ...
</table>
</div>
 Chapter 12

CSS Box Model
In this tutorial you will learn how elements are visually laid out on the web pages.

What is Box Model?

Every element that can be displayed on a web page is comprised of one or more
rectangular boxes. CSS box model typically describes how these rectangular
boxes are laid out on a web page. These boxes can have different properties and
can interact with each other in different ways, but every box has a content
area and optional surrounding padding, border, and margin areas.

The following diagram demonstrates how the width, height, padding, border, and
margin CSS properties determines how much space an element can take on a
web page.
Padding is the transparent space between the element's content and its border
(or edge of the box, if it has no border), whereas margin is the transparent space
around the border.

Also, if an element has the background color it will be visible through its padding
area. The margin area is always remain transparent, it is not affected by the
element's background color, however, it causes the background color of the
parent element to be seen through it.

Width and Height of the Elements

Usually when you set the width and height of an element using the
CSS width and height properties, in reality you are only setting the width and
height of the content area of that element. The actual width and height of the
element's box depends on the several factors.

The actual space that an element's box might take on a web page is calculated
like this:
Box Size CSS Properties

Total Width width + padding-left + padding-right +

border-left + border-right + margin-left
+ margin-right

Total Height height + padding-top + padding-bottom +

border-top + border-bottom + margin-top +
margin-bottom

You will learn about each of these CSS properties in detail in upcoming chapters.

Now let's try out the following example to understand how the box model
actually works:

Example
Try this code »

div{
width: 300px;
height: 200px;
padding: 15px;/* set padding for all four sides */
border: 10px solid black;/* set border for all four sides */
margin: 20px auto;/* set top and bottom margin to 20 pixels, and
left and right margin to auto */
}

Note: In CSS box model; the content area of an element's box is the area where
its content, e.g., text, image, video, etc. appears. It may also contain descendant
elements boxes.
 Chapter 13

CSS Dimension
In this tutorial you will learn how to set width and height of an element using
CSS.

Setting Element Dimensions

CSS has several dimension properties, such as width, height, max-width, min-
width, max-height, and min-height that allows you to control the width and height of
an element. The following sections describe how to use these properties to create
a better web page layout.

Setting the Width and Height

The width and height property defines the width and height of the content area of
an element.
 This width and height does not include paddings, borders, or margins. See
the CSS box model to know how the effective width and height of an element's
box is calculated.

Let's try out the following example and see how it actually works:

Example
Try this code »

div{
width: 300px;
height: 200px;
}

The above style rules assigns a fixed width of 300 pixels and height of 200px to
the <div> element.

The width and height properties can take the following values:

 length - specifies a width in px, em, rem, pt, cm, etc.

 % - specifies a width in percentage (%) of the width of the containing
element.
 auto - the browser calculates a suitable width for the element.
 initial - Sets the width and height to its default value, which is auto.
 inherit - specifies that the width should be inherited from the parent
element.

You can not specify negative values to the width and height properties.

Tip: Typically when you create a block element, such as <div>, <p>, etc. browser
automatically set their width to 100% of the available width, and height to
whatever is needed to show all the content. You should avoid setting a fixed
width and height unless it is necessary.
Setting Maximum Width and Height
You can use the max-width and max-height property to specify the maximum width
and height of the content area. This maximum width and height does not include
paddings, borders, or margins.

An element cannot be wider than the max-width value, even if the width property

value is set to something larger. For instance, if the width is set to 300px and
the max-width is set to 200px, the actual width of the element will be 200px. Let's
check out an example:

Example
Try this code »

div{
width: 300px;
max-width: 200px;
}

Note: If the min-width property is specified with a value greater than that of max-

width property, in this case the min-width value will in fact be the one that's
applied.

Likewise, an element that has max-height applied will never be taller than the value
specified, even if the height property is set to something larger. For example, if
the height is set to 200px and the max-height set to 100px, the actual height of the
element will be 100px.

Example
Try this code »

div{
height: 200px;
max-height: 100px;
}
Note: If the min-height property is specified with a value greater than that of max-
height property, in this case the min-height value will in fact be the one that's
applied.

Setting Minimum Width and Height

You can use the min-width and min-height property specify the minimum width and
height of the content area. This minimum width and height does not include
paddings, borders, or margins.

An element cannot be narrower than the min-width value, even if

the width property value is set to something lesser. For example, if the width is set
to 300px and the min-width is set to 400px, the actual width of the element will be
400px. Let's see how it actually works:

Example
Try this code »

div{
width: 200px;
min-width: 300px;
}

Note: The min-width property is usually used to ensure that an element has at

least a minimum width even if no content is present. However the element will be
allowed to grow normally if its content exceeds the minimum width set.

Similarly, an element to which min-height is applied will never be smaller than the

value specified, even if the height property is set to something lesser. For
example, if the height is set to 200px, and the min-height is set to 300px, the actual
height of the element will be 300px.

Example
Try this code »

div{
height: 100px;
min-height: 200px;
}

Note: The min-height property is usually used to ensure that an element has at

least a minimum height even if no content is present. However the element will
be allowed to grow normally if the content exceeds the minimum height set.

Setting a Width and Height Range

The min-width and min-height properties are often used in combination with
the max-width and max-height properties to produce a width and height range for
an element.

This can be very useful for creating flexible design. In the following example the
minimum width of the <div> element would be 300px and it can stretches
horizontally up to a maximum 500px.

Example
Try this code »

div{
min-width: 300px;
max-width: 500px;
}

Similarly, you can define a height range for an element. In the example below the
minimum height of the <div> element would be 300px and it can stretches
vertically up to a maximum 500px.

Example
Try this code »

div{
min-height: 300px;
max-height: 500px;
}

Chapter 14

CSS Padding
In this tutorial you will learn how to adjust the padding area of an element using
CSS.

CSS Padding Properties

The CSS padding properties allow you to set the spacing between the content of
an element and its border (or the edge of the element's box, if it has no defined
border).

The padding is affected by the element's background-color. For instance, if you

set the background color for an element it will be visible through the padding
area.
 Define Paddings for Individual Sides
You can specify the paddings for the individual sides of an element such as top,
right, bottom, and left sides using the CSS padding-top, padding-
right, padding-bottom, and the padding-left properties, respectively. Let's try
out an example to understand how it works:

Example
Try this code »

h1{
padding-top: 50px;
padding-bottom: 100px;
}
p{
padding-left: 75px;
padding-right: 75px;
}

The padding properties can be specified using the following values:

 length - specifies a padding in px, em, rem, pt, cm, etc.

 % - specifies a padding in percentage (%) of the width of the containing
element.
 inherit - specifies that the padding should be inherited from the parent
element.

Unlike CSS margin, values for the padding properties cannot be negative.

The Padding Shorthand Property

The padding property is a shorthand property to avoid setting padding of each
side separately, i.e., padding-top, padding-right, padding-bottom and padding-
left.

Let's take a look at the following example to understand how it basically works:
 Example
Try this code »

h1{
padding: 50px;/* apply to all four sides */
}
p{
padding: 25px 75px;/* vertical | horizontal */
}
div{
padding: 25px 50px 75px;/* top | horizontal | bottom */
}
pre{
padding: 25px 50px 75px 100px;/* top | right | bottom | left */
}

This shorthand notation can take one, two, three, or four whitespace separated
values.

 If one value is specified, it is applied to all four sides.

 If two values are specified, the first value is applied to the top and
bottom side, and the second value is applied to the right and left side of the
element's box.
 If three values are specified, the first value is applied to the top, second
value is applied to right and left side, and the last value is applied to
the bottom.
 If four values are specified, they are applied to the top, right, bottom and
the left side of the element's box respectively in the specified order.

It is recommended to use the shorthand properties, it will help you to save some
time by avoiding the extra typing and make your CSS code easier to follow and
maintain.

Effect of Padding and Border on Layout

When creating web page layouts, adding a padding or border to the elements
sometimes produce unexpected result, because padding and border is added to
the width and height of the box generated by the element, as you have learnt in
the CSS box model chapter.

For instance, if you set the width of a <div> element to 100% and also apply left
right padding or border on it, the horizontal scrollbar will appear. Let's see an
example:

Example
Try this code »

div{
width: 100%;
padding: 25px;
}

To prevent padding and border from changing element's box width and height,
you can use the CSS box-sizing property. In the following example the width
and height of the <div> box will remain unchanged, however, its content area will
decrease with increasing padding or border.

Example
Try this code »

div{
width: 100%;
padding: 25px;
box-sizing: border-box;
}
You will learn about the CSS box sizing feature in detail in the upcoming
chapters.

Chapter 15

CSS Border
In this tutorial you will learn how to define border around an element using CSS.

CSS Border Properties

The CSS border properties allow you to define the border area of an element's
box.

Borders appear directly between the margin and padding of an element. The
border can either be a predefined style like, solid line, dotted line, double line,
etc. or an image.

The following section describes how to set the style, color, and width of the
border.

Understanding the Different Border Styles

The border-style property sets the style of a box's border such
as: solid, dotted, etc. It is a shorthand property for setting the line style for all
four sides of the elements border.

The border-style property can have the following

values: none, hidden, solid, dashed, dotted, double, inset, outset, groove,
and ridge. Now, let's take a look at the following illustration, it gives you a sense
of the differences between the border style types.
The values none and hidden displays no border, however, there is a slight
difference between these two values. In the case of table cell and border
collapsing, the none value has the lowest priority, whereas the hidden value has
the highest priority, if any other conflicting border is set.

The values inset, outset, groove, and ridge creates a 3D like effect which

essentially depends on the border-color value. This is typically achieved by
creating a "shadow" from two colors that are slightly lighter and darker than the
border color. Let's check out an example:

Example
Try this code »

h1{
border-style: dotted;
}
p{
border-style: ridge;
}

Note: You must specify a border style in order to make the border appear
around an element, because the default border style is none. Whereas, the default
border width or thickness is medium, and the default border color is the same as
the text color.

Setting the Border Width

The border-width property specifies the width of the border area. It is a
shorthand property for setting the thickness of all the four sides of an element's
border at the same time.

Let's try out the following example to understand how it works:

Example
Try this code »

p{
border-style: dashed;
border-width: 10px;
}

Tip: The border width can be specified using any length value, such as px, em,
rem, and so on. In addition to length units, the border width may also be
specified using one of three keywords: thin, medium, and thick. Percentage
values are not allowed.

Specifying the Border Color

The border-color property specifies the color of the border area. This is also a
shorthand property for setting the color of all the four sides of an element's
border.

The following style rules adds a solid border of red color around the paragraphs.

Example
Try this code »

p{
border-style: solid;
border-color: #ff0000;
}

Note: The CSS border-width or border-color property does not work if it is

used alone. Use the border-style property to set the style of the border first.
The Border Shorthand Property
The border CSS property is a shorthand property for setting one or more of the
individual border properties border-width, border-style and border-color in a
single rule.

Let's take a look at the following example to understand how it works:

Example
Try this code »

p{
border: 5px solid #00ff00;
}

If the value for an individual border property is omitted or not specified while
setting the border shorthand property, the default value for that property will be
used instead, if any.

For instance, if the value for the border-color property is missing or not

specified when setting the border, the element's color property will be used as
the value for the border color.

In the example below, the border will be a solid red line of 5 pixels width:

Example
Try this code »

p{
color: red;
border: 5px solid;
}
But, in the case of border-style, omitting the value will cause no border to show
at all, because the default value for this property is none. In the following
example, there will be no border:

Example
Try this code »

p{
border: 5px #00ff00;
}

Chapter 16

CSS Margin
In this tutorial you will learn how to adjust space around an element using CSS.

CSS Margin Properties

The CSS margin properties allow you to set the spacing around the border of an
element's box (or the edge of the element's box, if it has no defined border).
 An element's margin is not affected by its background-color, it is always
transparent. However, if the parent element has the background color it will be
visible through its margin area.

Setting Margins for Individual Sides

You can specify the margins for the individual sides of an element such as top,
right, bottom, and left sides using the CSS margin-top, margin-right, margin-
bottom, and the margin-left properties, respectively. Let's try out the following
example to understand how it works:

Example
Try this code »

h1{
margin-top: 50px;
margin-bottom: 100px;
}
p{
margin-left: 75px;
margin-right: 75px;
}

The margin properties can be specified using the following values:

 length - specifies a margin in px, em, rem, pt, cm, etc.

 % - specifies a margin in percentage (%) of the width of the containing
element.
 auto - the browser calculates a suitable margin to use.
 inherit - specifies that the margin should be inherited from the parent
element.

You can also specify negative margins on an element, e.g., margin:

-10px;, margin: -5%;, etc.

The Margin Shorthand Property

 The margin property is a shorthand property to avoid setting margin of each side
separately, i.e., margin-top, margin-right, margin-bottom and margin-left.

Let's take a look at the following example to understand how it basically works:

Example
Try this code »

h1{
margin: 50px;/* apply to all four sides */
}
p{
margin: 25px 75px;/* vertical | horizontal */
}
div{
margin: 25px 50px 75px;/* top | horizontal | bottom */
}
hr{
margin: 25px 50px 75px 100px;/* top | right | bottom | left */
}

This shorthand notation can take one, two, three, or four whitespace separated
values.

 If one value is specified, it is applied to all four sides.

 If two values are specified, the first value is applied to the top and
bottom side, and the second value is applied to the right and left side of the
element's box.
 If three values are specified, the first value is applied to the top, second
value is applied to right and left side, and the last value is applied to
the bottom.
 If four values are specified, they are applied to the top, right, bottom and
the left side of the element's box respectively in the specified order.

It is recommended to use the shorthand properties, it will help you to save some
time by avoiding the extra typing and make your CSS code easier to follow and
maintain.
Horizontal Centering with Auto Margins
The auto value for the margin property tells the web browser to automatically
calculate the margin. This is commonly used to center an element horizontally
within a larger container.

Let's try out the following example to understand how it works:

Example
Try this code »

div{
width: 300px;
background: gray;
margin: 0 auto;
}

The above style rules lets the <div> element take up 300 pixels of all the
horizontal space available, and the remaining space will be equally divided
between left and right margins.