www.FGWilson.

com

P33-1
Image for illustration purposes only.

Output Ratings Ratings and Performance Data

Generating Set Model Prime Standby Engine Make & Model: Perkins 1103A-33G1
380-415V,50Hz 30.0 kVA / 24.0 kW 33.0 kVA / 26.4 kW Alternator manufactured for
Leroy Somer
FG Wilson by:
480V, 60 Hz 33.8 kVA / 27.0 kW 37.5 kVA / 30.0 kW
Alternator Model: LL1514F
Ratings at 0.8 power factor. Control Panel: DCP-10
Base Frame: Heavy Duty Fabricated Steel
Circuit Breaker Type: 3 Pole MCB / 3 Pole MCCB
Frequency: 50 Hz 60 Hz
Prime Rating
These ratings are applicable for supplying continuous electrical power Engine Speed: RPM 1500 1800
(at variable load) in lieu of commercially purchased power. There is no
limitation to the annual hours of operation and this model can supply 10% Fuel Tank Capacity: 161 (42.5)
litres (US gal)
overload power for 1 hour in 12 hours.
Fuel Consumption: l/hr (US gal/hr)
Standby Rating
These ratings are applicable for supplying continuous electrical power (at (100% Load) - Prime 7.0 (1.8) 8.1 (2.1)
variable load) in the event of a utility power failure. No overload is
- Standby 7.7 (2.0) 9.0 (2.4)
permitted on these ratings. The alternator on this model is peak
continuous rated (as defined in ISO 8528-3).

Standard Reference Conditions

Available Options
Note: Standard reference conditions 25°C (77°F) Air Inlet Temp, 100m
(328 ft) A.S.L. 30% relative humidity.
FG Wilson offer a range of optional features to tailor our generating
Fuel consumption data at full load with diesel fuel with specific gravity of sets to meet your power needs. Options include:
0.85 and conforming to BS2869: 1998, Class A2, EN590.
Upgrade to CE Certification
A wide range of Sound Attenuated Enclosures
A variety of generating set control and synchronising panels
Additional alarms and shutdowns
A selection of exhaust silencer noise levels
For further information on all of the standard and optional features
accompanying this product please contact your local Dealer or visit:
www.FGWilson.com

Dimensions and Weights

Length (L) Width (W) Height (H) Dry Wet

mm (in) mm (in) mm (in) kg (lb) kg (lb)

1540 (60.6) 970 (38.2) 1361 (53.6) 830 (1830) 843 (1858)

Dry = With Lube Oil Wet = With Lube Oil and Coolant

Ratings in accordance with ISO 8528, ISO 3046, IEC 60034, BS5000 and NEMA MG-1/22.
Generating set pictured may include optional accessories.
 Engine Technical Data Air Systems 50 Hz 60 Hz

No. of Cylinders / Alignment: 3 / In Line Air Filter Type: Replaceable Element

Cycle: 4 Stroke Combustion Air Flow: m³/min (cfm)

Bore / Stroke: mm (in) 105.0 (4.1)/127.0 (5.0) - Prime 2.2 (76) 2.6 (92)
Naturally Aspirated - Standby 2.2 (76) 2.6 (91)
Induction:
Max. Combustion Air Intake
Restriction: kPa (in H2O) 6.5 (26.1) 6.5 (26.1)
Cooling Method: Water
Governing Type: Mechanical
Governing Class: ISO 8528 G2
Compression Ratio: 19.25:1
Cooling System 50 Hz 60 Hz
Displacement: l (cu. in) 3.3 (201.4)
Cooling System Capacity: l (US gal) 10.2 (2.7) 10.2 (2.7)
Moment of Inertia: kg m² (lb/in²) 1.14 (3896)
Water Pump Type: Centrifugal
Engine Electrical System:
Heat Rejected to Water & Lube Oil:
- Voltage / Ground 12/Negative
kW (Btu/min) - Prime 16.0 (910) 18.0 (1024)
- Battery Charger Amps 65
- Standby 18.0 (1024) 22.0 (1251)
Weight: kg (lb) - Dry 412 (908)
Heat Radiation to Room: Heat radiated from engine and alternator
- Wet 430 (948) kW (Btu/min) - Prime 7.9 (449) 8.2 (466)
- Standby 9.3 (529) 9.7 (552)

Radiator Fan Load: kW (hp) 0.3 (0.4) 0.5 (0.7)

Performance 50 Hz 60 Hz Radiator Cooling Airflow: m³/min (cfm) 62.6 (2211) 84.8 (2995)
External Restriction to
Engine Speed: rpm 1500 1800 125 (0.5) 125 (0.5)
Cooling Airflow: Pa (in H2O)
Gross Engine Power: kW (hp)
Designed to operate in ambient conditions up to 50°C (122°F).
- Prime 28.2 (38.0) 33.1 (44.0) Contact your local FG Wilson Dealer for power ratings at specific site conditions.

- Standby 31.0 (42.0) 36.5 (49.0)

BMEP: kPa (psi)

- Prime 684.0 (99.2) 669.0 (97.0) Lubrication System

- Standby 752.0 (109.0) 738.0 (107.0) Oil Filter Type: Spin-On, Full Flow
Total Oil Capacity: l (US gal) 8.3 (2.2)
Oil Pan: l (US gal) 7.8 (2.1)
Oil Type: API CG4 / CH4 15W-40

Fuel System Oil Cooling Method: Water

Fuel Filter Type: Replaceable Element

Recommended Fuel: Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr) Exhaust System 50 Hz 60 Hz
110% 100% 75% 50% Silencer Type: Industrial
Prime Load Load Load Load Silencer Model & Quantity: SD50 (1)
50 Hz 7.7 (2.0) 7.0 (1.8) 5.2 (1.4) 3.8 (1.0) Pressure Drop Across Silencer
1.80 (0.532) 2.00 (0.591)
System: kPa (in Hg)
60 Hz 9.0 (2.4) 8.1 (2.1) 6.2 (1.6) 4.7 (1.2)
Silencer Noise Reduction Level: dB 20 19

Maximum Allowable Back Pressure: 8.0 (2.4) 10.0 (3.0)

100% 75% 50% kPa (in Hg)

Standby Load Load Load Exhaust Gas Flow: m³/min (cfm)

50 Hz 7.7 (2.0) 5.7 (1.5) 4.1 (1.1) - Prime 5.7 (201) 6.4 (226)
60 Hz 9.0 (2.4) 6.8 (1.8) 5.0 (1.3) - Standby 5.8 (205) 6.6 (233)

(Based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Exhaust Gas Temperature: °C (°F)
Class A2, EN590)
- Prime 500 (932) 520 (968)
- Standby 520 (968) 530 (986)
 Alternator Physical Data Alternator Operating Data

Manufactured for FG Wilson by: Leroy Somer Overspeed: rpm 2250

Model: LL1514F Voltage Reguation: (Steady state) +/- 1.0%
No. of Bearings: 1 Wave Form NEMA = TIF: 50
Insulation Class: H Wave Form IEC = THF: 2.0%
Winding Pitch Code: 2/3 - 6 Total Harmonic content LL/LN: 5.0%
Suppression is in line with European
Wires: 12 Radio Interference: Standard EN61000-6
Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)
Excitation System: SHUNT - 50 Hz 3.3 (188)
AVR Model: R220 - 60 Hz 3.7 (210)

Alternator
50 Hz 60 Hz
Performance Data:

Data Item 415/240V 400/230V 380/220V 220/127V 480/277V 380/220V 240/120V 230/115V 440/254V

230/115V 220/110V 240/139V 220/110V 208/120V 220/127V

200/115V

Motor Starting
72 68 63 78 78 55 63 59 69
Capability* kVA

Short Circuit
- - - - - - - - -
Capacity %

Reactances: Per Unit

Xd 2.298 2.474 2.741 2.045 2.323 3.706 3.092 3.345 2.764
X'd 0.143 0.153 0.170 0.127 0.144 0.230 0.192 0.207 0.171
X"d 0.071 0.077 0.085 0.063 0.072 0.115 0.096 0.104 0.086

Reactances shown are applicable to prime ratings.

*Based on 30% voltage dip at 0.6 power factor and SHUNT excitation system.

Voltage Technical Data 50 Hz Voltage Technical Data 60 Hz

Voltage Prime: Standby: Voltage Prime: Standby:
kVA kW kVA kW kVA kW kVA kW
415/240V 30.0 24.0 33.0 26.4 480/277V 33.8 27.0 37.5 30.0

400/230V 30.0 24.0 33.0 26.4 220/127V 33.8 27.0 37.5 30.0

380/220V 30.0 24.0 33.0 26.4 380/220V 33.8 27.0 37.4 29.9

230/115V 30.0 24.0 33.0 26.4 240/120V 33.8 27.0 37.5 30.0

220/127V 30.0 24.0 33.0 26.4 230/115V 33.8 27.0 37.5 30.0

220/110V 30.0 24.0 33.0 26.4 440/254V 33.8 27.0 37.5 30.0

200/115V 30.0 24.0 33.0 26.4 220/110V 33.8 27.0 37.4 29.9

208/120V 33.8 27.0 37.5 30.0

240/139V 33.8 27.0 37.5 30.0

General Information

Documentation

A full set of operation and maintenance manuals and circuit wiring diagrams.

Generating Set Standards

The equipment meets the following standards: BS5000, ISO 8528, ISO 3046, IEC 60034, NEMA MG-1.22.

FG Wilson is a fully accredited ISO 9001 company.

Warranty

All prime equipment carries a one year manufacturer's warranty. Standby equipment, limited to 500 running hours per year, has a two year manufacturer's

warranty. For details on warranty cover please contact your local Dealer, or visit our website: FGWilson.com.

Dealer contact details:

FG Wilson manufactures product in the following locations:

Northern Ireland • Brazil • China • India • USA
With headquarters in Northern Ireland, FG Wilson operates through a Global Dealer Network.

FG Wilson is a trading name of Caterpillar (NI) Limited

In line with our policy of continuous product development, we reserve the right to change specification without notice. P33-1/4PP/0213/GB