This document contains the configuration of router R6. It shows the IP addresses configured on various interfaces including Loopback0, GigabitEthernet ports, and Ethernet ports. It also shows that EIGRP routing protocol is running with various networks redistributed. Route maps and prefix lists are configured to filter routes.
This document contains the configuration of router R6. It shows the IP addresses configured on various interfaces including Loopback0, GigabitEthernet ports, and Ethernet ports. It also shows that EIGRP routing protocol is running with various networks redistributed. Route maps and prefix lists are configured to filter routes.
This document contains the configuration of router R6. It shows the IP addresses configured on various interfaces including Loopback0, GigabitEthernet ports, and Ethernet ports. It also shows that EIGRP routing protocol is running with various networks redistributed. Route maps and prefix lists are configured to filter routes.
This document contains the configuration of router R6. It shows the IP addresses configured on various interfaces including Loopback0, GigabitEthernet ports, and Ethernet ports. It also shows that EIGRP routing protocol is running with various networks redistributed. Route maps and prefix lists are configured to filter routes.
Download as TXT, PDF, TXT or read online from Scribd
Download as txt, pdf, or txt
You are on page 1of 4
R6#sh run
Building configuration...
Current configuration : 2619 bytes
! upgrade fpd auto version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R6 ! boot-start-marker boot-end-marker ! ! ! no aaa new-model no ip icmp rate-limit unreachable ! ! ! ! ! ! no ip domain lookup ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! ! redundancy ! ! ip tcp synwait-time 5 ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 6.6.6.6 255.255.255.0 ! interface Ethernet0/0 no ip address shutdown duplex auto ! interface GigabitEthernet0/0 ip address 172.16.56.6 255.255.255.0 duplex full speed 1000 media-type gbic negotiation auto ! interface GigabitEthernet1/0 ip address 172.16.46.6 255.255.255.0 negotiation auto ! interface Ethernet2/0 ip address 172.16.36.6 255.255.255.0 duplex half ! interface Ethernet2/1 ip address 172.16.26.6 255.255.255.0 duplex half ! interface Ethernet2/2 ip address 10.10.10.6 255.255.255.0 ip policy route-map RM1 duplex half ! interface Ethernet2/3 no ip address shutdown duplex half ! interface Ethernet2/4 no ip address shutdown duplex half ! interface Ethernet2/5 no ip address shutdown duplex half ! interface Ethernet2/6 no ip address shutdown duplex half ! interface Ethernet2/7 no ip address shutdown duplex half ! ! router eigrp 123 distribute-list route-map RM2 in network 6.6.6.0 0.0.0.255 network 10.0.0.0 network 172.16.26.0 0.0.0.255 network 172.16.36.0 0.0.0.255 network 172.16.46.0 0.0.0.255 network 172.16.56.0 0.0.0.255 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! ! ! ip prefix-list PL1 seq 10 permit 55.55.0.0/16 ge 27 le 29 ! ip prefix-list PL2 seq 5 permit 44.44.0.0/16 ge 24 le 26 ip prefix-list PL2 seq 10 permit 44.44.0.0/16 ge 30 le 30 ! ip prefix-list PL3 seq 10 permit 10.7.0.0/16 ge 24 ip prefix-list PL3 seq 20 permit 10.2.0.0/16 ge 24 access-list 101 permit icmp host 10.10.10.7 any access-list 102 permit ip any any no cdp log mismatch duplex ! route-map RM3 permit 10 match ip address prefix-list PL3 ! route-map RM2 permit 10 match ip address prefix-list PL1 ! route-map RM2 permit 20 match ip address prefix-list PL2 ! route-map RM1 permit 10 match ip address 101 set ip next-hop 172.16.56.5 ! route-map RM1 permit 20 match ip address 102 set ip next-hop 172.16.36.3 ! ! ! control-plane ! ! ! mgcp profile default ! ! ! gatekeeper shutdown ! ! line con 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line aux 0 exec-timeout 0 0 privilege level 15 logging synchronous stopbits 1 line vty 0 4 login transport input all ! ! end