Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 347 views

    KBL KEB Assembly F N R Wiring Diagram

    Uploaded by

    Muhammad Samuel
    1) The document describes a brushless DC motor system with a controller that uses hall sensors and a precharge resistor to control the motor. 2) The controller has a 14-pin connector that is used to control the motor direction, monitor throttle and brake inputs, and connect to a battery pack through a main contactor and fuses. 3) The controller can be configured through the 14-pin connector to allow forward and reverse direction control through separate switch inputs or through a single switch that selects between forward, reverse, and neutral positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    KBL KEB Assembly F N R Wiring Diagram

    Uploaded by

    Muhammad Samuel
    347 views1 page
    1) The document describes a brushless DC motor system with a controller that uses hall sensors and a precharge resistor to control the motor. 2) The controller has a 14-pin connector that is used to control the motor direction, monitor throttle and brake inputs, and connect to a battery pack through a main contactor and fuses. 3) The controller can be configured through the 14-pin connector to allow forward and reverse direction control through separate switch inputs or through a single switch that selects between forward, reverse, and neutral positions.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document describes a brushless DC motor system with a controller that uses hall sensors and a precharge resistor to control the motor. 2) The controller has a 14-pin connector that is used to control the motor direction, monitor throttle and brake inputs, and connect to a battery pack through a main contactor and fuses. 3) The controller can be configured through the 14-pin connector to allow forward and reverse direction control through separate switch inputs or through a single switch that selects between forward, reverse, and neutral positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    347 views1 page

    KBL KEB Assembly F N R Wiring Diagram

    Uploaded by

    Muhammad Samuel
    1) The document describes a brushless DC motor system with a controller that uses hall sensors and a precharge resistor to control the motor. 2) The controller has a 14-pin connector that is used to control the motor direction, monitor throttle and brake inputs, and connect to a battery pack through a main contactor and fuses. 3) The controller can be configured through the 14-pin connector to allow forward and reverse direction control through separate switch inputs or through a single switch that selects between forward, reverse, and neutral positions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    BLDC MOTOR

    MOTOR
    Precharge Resistor
    1KΩ/10W

    Hall Sensor

    C
    B
    Pole
    Control Box(Optional Item)
    B+
    Connector-14PIN
    PWR 1 Brown J2
    B-
    8 Pink PWR 1 Coil
    11 Green RTN 2
    13 Black RTN 3

    Fuse 5A
    Controller

    Fuse
    Main Contactor
    Thermistor 4
    4 White Throttle_AN 5
    5 NavyBlue
    Brake_AN 6
    10 Red Purple
    5VOutput 7 Diode 200V/3A
    12 Blue
    TPS FWD_SW 8
    7 Purple
    Reverse_SW 9
    6 Gray
    2
    Brake_SW 10
    Blue
    +

    Battery Pack
    Hall_C 11
    9 Green
    Hall_B 12 Yellow
    14
    Hall_A 13
    Black
    Place On Base Plate RTN 14
    BRK J2 Connecter on Controller

    F-N-R
    J2-8 can be used as Forward switch function.
    When you enable forward switch,you can not use foot switch or microswitch function any more.
    J2-8 is connected to GND,J2-9 is disconected to GND: Forward direction driving
    J2-8 is disconnected to GND,J2-9 is conected to GND: Reversing direction driving
    J2-8 is disconnected to GND,J2-9 is disconected to GND: Neutral position
    J2-8 is connected to GND,J2-9 is conected to GND: Neutral position

    See From Front Side


    1 2 3 4 5 6 7
    Brown White NavyBlue Gray Purple
    From battery TPS Brake _AN Brake _SW Reverse _SW KELLY CONTROLS, LLC

    8 9 10 11 12 13 14
    Pink Red Green Blue Black 02
    Mark Subarea Signatory Date 25/2019
    PWR
    5V output SW Common Forward SW RTN KBL/KEB(24V-72V)
    Design Stand Assembly Wiring Diagram
    modification Number Proportion
    14PIN Connector
    Assessor
    KBL/KEB(24V-72V) Assembly Wiring Diagram Technics Authorize
    V1.0

    Sum

    You might also like