PRODUCT DATASHEET

APXVBB20X3_43-C-I20
RF X-TREME™  4-port Antenna, 2.0m, 698-960 / 698-960 MHz, 65deg,  16.5 / 16.5 dBi, VET, 0-10°/0-10°

 
FEATURES / BENEFITS
This antenna provides an 4-port multi-band flexible platform for advanced use in low bands.
 
 
• 4 ports / 2 cross pol systems in low band
• Integrated RET platform and manual overdrive
• Slim radome design for optimun windload
• MIMO 4x4 for 700 or 800 and support of 900MHz legacy applications
 

Technical features
ELECTRICAL SPECIFICATIONS
Electrical Specification Header ELECTRICAL SPECIFICATIONS R1
Frequency Band Mhz 698-803 790 - 862 880 - 960
Polarization - Slant +/- 45
Impedance Ohms 50
Passive Intermodulation dBc -153
Maximum Effective Power per
Watts 500
Port
Gain Typical dBi 15.4 16.0 16.5
Gain Over All Tilts dBi 14.8 +/- 0.6 15.4 +/-0.6 15.9 +/-0.6
VSWR - 1.5:1
Return Loss dB 14
Cross Polar Isolation dB 28
Azimuth Beamwidth 3dB Deg 73+/-3.6 69.2+/-3.3 62.5+/-3.3
Front-To-Back, at +/-30 Total
dB 21.8 22.5 21.5
Power
Elevation Beamwidth 3 dB Deg 10.5+/-0.8 9.9+/-0.4 9+/-0.5
Electrical Downtilt Deg 0 to 10
Elevation Downtilt Deviation Deg 0.58 0.44 0.62
Upper Side Lobe Suppression
dB 16.8 16 15.9
Peak to +20

APXVBB20X3_43-C-I20 REV : D www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 1 of 3
time of ordering.
 PRODUCT DATASHEET
APXVBB20X3_43-C-I20
RF X-TREME™  4-port Antenna, 2.0m, 698-960 / 698-960 MHz, 65deg,  16.5 / 16.5 dBi, VET, 0-10°/0-10°

ELECTRICAL SPECIFICATIONS
Electrical Specification Header ELECTRICAL SPECIFICATIONS R2
Frequency Band Mhz 698-803 790 - 862 880 - 960
Polarization - Slant +/- 45
Impedance Ohms 50
Passive Intermodulation dBc
Maximum Effective Power per
Watts 500
Port
Gain Typical dBi 15.4 15.9 16.5
Gain Over All Tilts dBi 14.8 +/- 0.6 15.4 +/-0.5 15.9 +/-0.6
VSWR - 1.5:1
Return Loss dB 14
Cross Polar Isolation dB 28
Azimuth Beamwidth 3dB Deg 73.1+/-4.1 69.3+/-2.7 62.9+/-3.2
Frotn-To-Back, at +/-30 Total
dB 21.3 21.9 21.8
Power
Elevation Beamwidth 3 dB Deg 10.6+/-0.9 9.8+/-0.5 9+/-0.5
Electrical Downtilt Deg 0 to 10
Elevation Downtilt Deviation Deg 0.6 0.31 0.66
Upper Side Lobe Suppression
dB 16.8 16 16.2
Peak to +20
MECHANICAL SPECIFICATIONS
Dimensions - H x W x D mm (in) 2064 x 499 x 215 (81.2 x 19.6 x 8.5)
Weight (Antenna Only) kg (lb) 31.66 (69.79)
Weight (Mounting Hardware
kg (lb) 3.3 (7.28)
only)
Packing size- HxWxD mm (in) 2243 x 564 x 415 (86.6 x 22.4 x 13.8)
Shipping Weight kg (lb) 42.66 (94.04)
Connector type 4 x 4.3-10 Female at bottom + 2 AISG connectors (1 male, 1 female)
Adjustment mechanism Integrated Ret solution AISG 1.1 and 2.0 compliant with manual overdrive
Mounting Hardware Material Diecast Aluminium and Galvanized steel
Radome Material / Color ASA / Light Grey RAL7035
TESTING AND ENVIRONMENTAL
Temperature Range °C (°F) -40 to 60 (-40 to 140 )
Lightning protection Direct Ground
Survival/Rated Wind Velocity km/h 200 (150 )
Wind Load @Rated Wind Front N 1045
Wind Load @Rated Wind Side N 384
Wind Load @Rated Wind Rear N 1184
Environmental ETSI 300-019-2-4 Class 4.1E
ORDERING INFORMATION
Order No. Configuration Mounting Hardware Mounting pipe Diameter Weight
APXVBB20X3_43-C-I20 Internal RET included APM40-2 Beam tilt kit 60-120mm 42.66 kg

APXVBB20X3_43-C-I20 REV : D www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 2 of 3
time of ordering.
 PRODUCT DATASHEET
APXVBB20X3_43-C-I20
RF X-TREME™  4-port Antenna, 2.0m, 698-960 / 698-960 MHz, 65deg,  16.5 / 16.5 dBi, VET, 0-10°/0-10°

External Document Links Notes

APM40_Series_Installation_Instructions • All electrical parameters are compliant with BASTA NGMN 11.1
requirements.
• For additional mounting information please click ""External
Document Links"".
• Radiating patterns: Request pattern files

APXVBB20X3_43-C-I20 REV : D www.rfsworld.com

All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at Page 3 of 3
time of ordering.