Gedore Catalogue

TradeZone NZ Locations
ASHBURTON (03) 308 3147 NORTH SHORE (09) 414 7214

DARGAVILLE (09) 439 7335 OAMARU (03) 434 6956
FRANKTON (07) 847 4994 PALMERSTON NORTH (06) 357 8888
GISBORNE (06) 868 8214 PUKEKOHE (09) 238 1800
GORE (03) 208 4882 RANGIORA (03) 313 3425
HASTINGS (06) 870 4450 ROTORUA (07) 347 9110
TOTALRANGE
HAWERA (06) 278 4185 TAKAKA (03) 525 9847
20 20
INVERCARGILL (03) 218 2059 TE AWAMUTU (07) 871 7062
MORRINSVILLE (07) 889 7681 TE RAPA (07) 847 4994
MT MAUNGANUI (07) 575 0504 TIMARU (03) 684 7036
NAPIER (06) 842 2304 TOKOROA (07) 886 1700
NELSON (03) 547 8000 WANGANUI (06) 344 4804
NEW PLYMOUTH (06) 758 5133 WESTPORT (03) 789 7033
NORTH
SHORE
PUKEKOHE
FRANKTON MORRINSVILLE
TE RAPA MT MAUNGANUI
TOKOROA
TOTALRANGE
TAKAKA
RANGIORA
ASHBURTON
2020
OAMARU
MISSION STATEMENT DISCLAIMER “Our guarantee covers all
tools against breakage
As we are constantly improving our products, we reserve the right to make changes as the need arises.
The actual products delivered may therefore vary from those depicted in the catalogue. under normal working
Gedore strives to be the leading supplier of superior quality We do not provide any warranties in connection with technical and safety information provided in this catalogue. All customers are therefore advised to refer conditions and is subject
tools in Africa and other designated markets. directly to their manufacturer’s specifications and the advice and standards of the relevant professional/trade associations.
All products remain the property of Gedore Tools SA (Pty) Ltd until paid for in full.
to fair wear and tear.”
We seek to build and maintain lasting relationships with customers We cannot accept any liability for printing errors.
by responsively offering suitable products at fair prices, Reproduction of any part of this catalogue requires the prior written permission of Gedore Tools SA (Pty) Ltd.
which consistently conform to the highest level of product and All rights reserved worldwide.
service quality standards.
We strive to increase the value for all stakeholders and to be a

preferred supplier, employer and customer.
GEDORE TOOLS SA TORQUE WRENCH WARRANTY &

WARRANTY POLICY CALIBRATION POLICY
At GEDORE we take pride in the quality of our products and services and we review all warranty
VALUE SYSTEM claims with the aim of using the information gained for further product improvement.
Warranty
In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee
against defective materials and workmanship. Provided that the tool has been correctly used for
Every GEDORE tool is covered by a lifetime guarantee against defective material and workmanship.
its intended purpose and allowances have been made for the wear and tear of moving parts, the
Provided that the tool has been used correctly for its intended purpose and allowances have been
torque wrench will be repaired free of charge.
Quality made for wear and tear, this guarantee will allow for the repair or exchange of the tool.
We strive to be the best that we can be in everything that we do. The warranty does not cover torque wrenches which have been misused or which have experienced
While some deterioration through extensive use might be unavoidable, we will adopt a generous
wear and tear through extensive use.
Innovation and Knowledge approach when viewing warranty claims. We do, however, set warranty limitations on wear and tear,
We strive for continuous improvement in all aspects of our business obvious misuse, missing parts and purposely altered tools to protect ourselves against unreasonable
A warranty return will be assessed by our technical staff and if the return falls outside of our war-
through learning, benchmarking and having a general uneasiness claims.
ranty policy, the customer will be notified and quoted for the repair.
with the status quo.
Should the product fall outside the parameters of the warranty criteria, we will advise the customer
Calibration
Responsiveness on the repair or replacement cost of the article.
A standard calibration and the issue of a test certificate will be provided as standard practice on
We have a bias for action by feeling a sense of urgency in everything any repair conducted.
that we do, and encourage employees to be proactive.
A SANAS calibration and the issue of a SANAS calibration certificate will be done on request at a
Team Work and Mutual Respect nominal charge.
We encourage and support team participation, effective
communication and mutual respect. Obsolescence
Please note that while GEDORE uses its best endeavours to carry significant stocks of spares to
Motivation and People Centred support its torque wrench product range, some spares for older discontinued items are no longer
We acknowledge that our employees are the key to our success. available. In such cases, repair of the torque wrench may not be possible.
© Copyright by Gedore Tools SA (Pty) Ltd.
We motivate employees by providing opportunities for advancement,
sharing information, fair treatment, training, job security and
workplace safety.
Customer Focused
We expect all employees to maintain a customer focus in all aspects
of their work.
Care for the Environment

We are sensitive of the need to care for the environment and apply our
business processes accordingly.
Corporate Governance
We enforce good corporate governance by encouraging honesty,
transparency, trust, equity and social responsibility.
GEDORE – high-quality hand
tools with a lifetime guarantee
GEDORE Werkzeugfabrik, is a family-owned GEDORE operations are ISO-accredited, and all

manufacturer of superior quality hand tools products are manufactured to exceed international
and related industrial products. Headquartered operating standards. Every GEDORE hand tool
in Germany, with manufacturing operations in boasts a lifetime guarantee, offering consumers
Germany, Austria, UK, South Africa and Brazil, “Tools for Life”.
GEDORE has a global footprint, distributing their
products to more than 70 countries worldwide. With a wide selection of drop-forged, precision-
crafted hand tools to choose from, GEDORE provides
Under the motto of “Inspired by tradition - forging high-quality tools to a range of industries, artisans
the future”, GEDORE is celebrating its 100-year and professionals.
anniversary this year. Traditional forging methods
coupled with 21st century robotic and automated
operations ensure that GEDORE’s tools meet the
core objectives of accuracy, quality, versatility and
customer satisfaction.
1
NEW
147
3550-UK-LS3
TORQUE WRENCH
PRODUCTS
15
62P
ADJUSTABLE
WRENCH
84
S8000
CIRCLIP PLIERS SETS
32
D19 NZU-10T
SOCKET SET
65
DT 2142
ALLEN KEY
SET
2
TORQUE TOOLS
UNCOMPROMISING
AMBITION
INDEX
Controlled screw tightening - reliable
and safe for more than 50 years
142
SPANNERS 4-17
SOCKETS & ACCESSORIES 18-49
IMPACT SOCKETS & ACCESSORIES 50-59

133
650C
CLUB SCREWDRIVERS 60-71
HAMMERS
PLIERS 72-89
AUTOMOTIVE & SPECIAL TOOLS 90-101
SHEETMETAL & TOOL ASSORTMENTS 102-127
STRIKING TOOLS 128-133
VDE INSULATED SAFETY TOOLS 134-141
TORQUE TOOLS 142-177
PULLERS 178-187
NON-SPARKING TOOLS 188-193

78
S8393
PLIERS APPRENTICE TOOLKITS 194-203
SET
ARTISAN TOOLKITS 204-211
MERCHANDISERS 212-215
3
SPANNERS
4 - 17
SPANNERS, SETS
ADJUSTABLE WRENCHES
COMBINATION SPANNERS RATCHET SPANNERS RING SPANNERS

6 9 10
FLARE NUT SPANNERS OPEN ENDED SPANNERS ADJUSTABLE WRENCHES

13 14 15
SLOGGING SPANNERS HOOK SPANNERS CROWFOOT SPANNERS

16 17 17
SPANNERS
Combination Spanners
NO. 1 B – THE STRONG ALL-ROUNDER

› According to DIN 3113 Form B, ISO 3318, ISO 7738.
› Sizes 5 and 5.5mm with hexagon ring, from size 6mm upwards with UD profile. Ring: 10° off set from shaft, with UD
› GEDORE vanadium steel 31CrV3, chrome-plated. profile for gentle transmission of force
› Carefully forged and professionally machined.
› Overloading indicated by deformation.
› The offset ring ensures a better grip on deep-seated or inset nuts or bolts.
› Top-grade industrial quality for the hardest of continuous use. Non-glare look due to matt
chrome plating
Jaw: ground precisely to exact nominal

size for optimum contact areas
UD PROFILE protects bolt heads

Slim ribbed open end Torque is transmitted
The wave form of the ring
1 2 to the flanks of the bolt
for added strength profile allows the spanner head. This means that
to hold in all situations, the edges cannot be
guarantees maximum
even where the bolt deformed and the bolt is
torques dimensions effectively protected.
are outside the
tolerance range.
The contact surface area between the 4

spanner and the bolt head is markedly increased
due to the wave form. This allows a more even As the torque is transmitted to the flanks of the
distribution of the contact pressure, which in turn
allows the application of a higher torque.
3 bolt, even damaged bolt heads may be gripped
and turned.
1 B (MM) 3
COMBINATION SPANNERS
Code ! y Code ! y
6000240 5 100 15 600245 25 328 410
6000320 5,5 100 15 600253 26 340 450
600040 6 100 14 600261 27 352 500
600059 7 112 21 600288 28 370 560
600067 8 125 25 600296 29 370 570
600075 9 138 33 600318 30 390 645
600083 10 148 44 600326 32 412 780
600091 11 158 50 002540 33 412 1000
600105 12 168 60 600415 34 412 840
600113 13 185 77 600342 36 460 1160
600121 14 198 88 600350 38 -11/2” 460 1450
600148 15 210 103 002527 41 520 1485
600156 16 220 120 002528 46 560 1900
600164 17 232 140 002529 50 590 2350
600172 18 245 160 002530 55 620 3600
600180 19 258 190 6004070 60 660 3600
600199 20 270 220 6004660 65 710 4500
600202 21 280 250 6004740 70 760 5600
600210 22 292 300 6004820 75 810 6545
600229 23 305 335 6004900 80 860 8800
600237 24 318 370
6
1 B (AF) 3
inch
*WHILE STOCKS LAST

Code " y Code " y
600512 1/4” 100 14 600679 1.1/8” 370 570
600520 5/16” 125 25 600881 1.3/16” 370 570
600539 3/8” 148 45 600687 1.1/4” 412 780
600547 7/16” 158 50 600695 1.5/16” 412 790
600555 1/2” 185 80 600709 1.3/8” 460 1150
600563 9/16” 198 97 600717 1.7/16” 460 1160
600571 5/8” 220 120 600725 1.1/2” 460 1170
600598 11/16” 245 174 6007330 1. 5/8” 520 1500
600601 3/4” 258 185 6007410 1.3/4” 550 1900
600628 13/16” 280 250 6007760 1.7/8” 550 1900
600636 7/8” 292 300 6007840 2” * 580 2400
600644 15/16” 318 370 6007920 2.1/16” * 580 3200
600652 1.” 340 450 6008060 2.3/16” 620 3600
600660 1.1/16” 352 500 6008140 2.1/4” 620 4000
6008220 2.3/8” * 660 4400
6008300 2.7/16” * 660 4800
3
1 B (MM) / 1 B (AF)
COMBINATION SPANNER SETS
Code ! " Contents 0

601152 1B-04M 10 13 17 19 0.500
601160 1B-06M 10 11 13 14 17 19 0.670
601187 1B-08M 10 12 13 14 17 19 22 24 1.380
601200 1B-10M 10 11 12 13 14 15 16 17 18 19 2.100
601217 1B-12M 10 11 12 13 14 17 19 22 24 27 30 32 3.260
601268 1B-17M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1.910
601268TR 1B-17M WITH TOOL ROLL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2.270
601438 1B-18M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 2.390
601292 1B-TOP 20M 20 MOST POPULAR SIZES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 3.373
601276 1B-26M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 6.740
601276TR 1B-26M WITH TOOL ROLL 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 6.740
601179 1B-13A 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 2.285
601209 1B-017A 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 1.1/16” 1.1/8” 1.3/16” 1.1/4” 4.765
SLOGGING SPANNERS 16 1425/41/1B FOAM ASSORTMENTS 1 22
7
SPANNERS
NO. 7 – SLIM LINE

› According to DIN 3113 Form A, ISO 3318, ISO 7738.
› Gedore vanadium steel 31CrV3, chrome-plated. Jaw: ground precisely to exact nominal size Ring: 15° off set from shaft, with UD
for optimum contact areas profile for gentle transmission of force
› Slim jaw and jaw walls make this spanner lighter overall.
› Overloading indicated by deformation.
› Secure grip.
› Non-glare look thanks to matt chrome-plating.
› Designed for universal use.
Non-glare look due to matt
chrome plating
3
7 (MM)
with same size each end
Code ! y Code ! y
608955 6 100 12 609080 19 230 150
608963 7 110 15 609196 20 240 220
608971 8 120 20 609218 21 250 250
608998 9 130 32 609099 22 260 215
609005 10 140 34 609226 23 270 335
609013 11 150 45 609102 24 280 295
609021 12 160 50 609234 25 290 410
609048 13 170 65 609242 26 300 450
609056 14 180 73 609110 27 310 400
609064 15 190 90 609250 28 320 440
609161 16 200 120 609269 29 330 500
609072 17 210 105 609129 30 340 544
609188 18 220 165 609137 32 380 624
3
7 (MM)
Code ! Contents 0
609358 7-17M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1.65
609579 7-21 M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 3.70
609374 7-26 M 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 5.11
8
Combination Ratchet Spanners
THE REVOLUTION
Hollow profile comfortable to hold For ratchet loosening
› With same size each end. and fast tightening
› UD profile.
› High torque transfer.
› Gedore vanadium steel 31CrV3.
› Non-glare look thanks to matt chrome-plating
› Locking insert and pawl manganese-phosphated.
› Hot forged.
› Jaw: ground precisely to exact nominal size for
optimum contact areas.
Warp-resistant geometry with double
T-girder effect Non-glare look due to matt
chrome plating
7R 3
COMBINATION RATCHET SPANNERS
Code ! y Code ! y
2297051 8 7 140 32 2297167 18 6 237 197
2297078 9 7 150 42 2297175 19 6 250 202
2297086 10 7 160 54 2219433 21 6 274 262
2297094 11 7 164 63 2297191 22 6 292 319
2297108 12 7 170 69 2297205 24 6 325 520
2297116 13 7 180 88 2297213 27 6 359 590
2297124 14 7 190 101 2297221 30 5 399 780
2297132 15 7 200 125 2297248 32 5 424 920
2297140 16 6 212 137 2219549 34 5 449 1010
2297159 17 6 225 160 2219557 36 5 480 1208
3 3
7 R-005 7 R-012
COMBINATION RATCHET COMBINATION RATCHET
SPANNER SET SPANNER SET
5 pieces 12 pieces
› Most popular sizes combined in a set. › Most popular sizes combined in a set.
› Flat pattern. › Flat pattern.
› UD profile. › UD profile.
› High torque transfer. › High torque transfer.
› In plastic case. › In robust sheet-metal case.
› Dimensions: 275 x 150 x 42mm. › Dimensions: 320 x 210 x 55mm.
Code Contents 0 Code Contents 0

2297434 7R 8 10 13 17 19 0.930 2297442 7R 8 9 10 11 12 13 14 15 16 17 18 19 2.840
9
SPANNERS
Swivel Head Wrenches Double Ended Ring Spanners
534 3 NO. 2 – RING SPANNER

COMBINATION SWIVEL HEAD › Rings: thin walled with deep offset.
› Chrome VANADIUM steel 31CrV3.
WRENCHES › Ring: thin-walled, 5° deep offset from shaft, with UD profile for gentle transmission of force.
› High bending strength does not fracture or splinter when overloaded,
› Slim pattern, with free moving socket wrench. thus minimising the risk of injury.
› With hole for tommy bars 26 D and 26 RS (please order separately). › In accordance with SANS 1112 and DIN 838.
› Gedore vanadium steel 31CrV3, heads polished, chrome-plated.
2 3
DOUBLE ENDED RING SPANNERS
Code ! y 0 Code ! y
651206 10 177 0.055 601535 6x7 170 50
651214 11 189 0.065 601551 8X9 182 65
651222 12 198 0.075 601594 10x11 195 95
651230 13 208 0.095 601659 12x13 212 120
651249 14 218 0.110 601691 14x15 225 155
651257 15 231 0.120 601721 16x17 245 210
651265 16 244 0.140 601748 17x19 265 260
651273 17 255 0.170 601756 18x19 265 260
651516 18 269 0.220 601780 20x22 287 325
651281 19 283 0.240 601799 19x24 305 410
601802 21x23 305 410
601837 24x26 325 475
601853 24x30 345 580
601861 25x28 345 580
534 3 601918
601926
27x32
30x32
370
370
680
680
601934 30x36 400 1000
COMBINATION SWIVEL HEAD 601942 32x36 400 1100
003518 36x41 440 1150
WRENCH SETS 003519
003520
38x42
41x46
440
535
1200
2250
003521 46x50 535 2150
2 AF 3
RING SPANNER
*WHILE STOCKS LAST
Code ! Contents 0 Code " y 0
651389 534-6M 10 12 13 14 17 19 1.000 003558 13/16x7.8” 285 0.360
651397 534-9M 10 11 12 13 14 15 16 17 19 1.410 003561 1.1/16x1.1/4” * 370 0.700
003567 1.7/16x1.5/8” 440 1.300
003568 1.13/16x2” * 540 2.200
10
2 3 304 / 304 (AF) 3
DOUBLE ENDED RING SPANNER HALF-MOON RING SPANNERS
SETS
› Sets of the most popular sizes. › Chrome Vanadium steel 31CrV3.
› Rings: thin walled with deep offset. › Chrome plated, polished rings.
› Chrome Vanadium steel 31CrV3.
› In accordance with SANS 1112 and DIN 838.
Code ! Contents 0 Code ! y 0

603058 2-8M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 1.380 006001 11x13 152 0.075
6x7 8x9 10x11 12x13 14x15 16x17 17x19 18x19 20x22 006006 13x15 185 0.135
603112 2-11M 2.630
21x23 24x30 6470120 13x17 185 0.135
6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 006002 14x16 185 0.120
603090 2-12M 3.440
24x26 25x28 27x32 6470390 14x17 185 0.135
006003 15x17 186 0.120
006007 16x18 185 0.170
006005 19x21 233 0.230
006004 19x22 233 0.230
Code " y 0
006051 7/16x1/2 150 0.075
TX4 006052
006053
9/16x5/8
3/4x7/8
185
230
0.135
0.275
FLAT RING SPANNERS -

TORX®
304 3
straight pattern, for protruding
HALF-MOON RING SPANNER
TORX® head screws
SETS
› Chrome plated, polished rings. › Chrome Vanadium steel 31CrV3.
› For outside TORX®. › Chrome plated, polished rings.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA
Code 9 + & y 0 Code ! Contents 0

6059800 E6xE8 M5 - M7 5,74 x 7,52 110 0.014 634018 6M 11x13 14x16 15x17 16x18 19x21 19x22 1.200
6059990 E10xE12 M8 - M10 9,42 x 11,17 140 0.040
6060140 E14xE18 M12 - M14 12,9 x 16,7 180 0.074
6060220 E20xE24 M16 - M20 18,45 x 22,16 226 0.163
11
SPANNERS
Deep Ring Spanners Friction Type Ratchet
2A 29 I
SINGLE ENDED RING SPANNERS CONSTRUCTION RATCHETS
offset
› Heavy-duty pattern for highest torques. Reversible ratchet with two different size heads.
› Chrome Vanadium steel — 31CrV3. Bi-hexagon and ‘rat-tail’ handle.
› Optional accessories: No. 2 AR extension tube for extending the
lever arm.
No. 2A + 2 AR
Code ! y 0 Code ! y 0
6033840 24 180 0.350 1648934 17x19 315 0.500
6033920 27 190 0.400 1382853 19x22 315 0.700
6034060 30 200 0.450 1648926 19x24 365 0.700
6034140 32 235 0.550 031320 22x24 365 0.800
6030150 34 235 0.650 031322 24x27 370 0.800
6034220 36 245 0.650 6262790 24x30 450 1.400
6034300 41 265 0.750 031325 27x30 450 1.400
6034490 46 280 1.050 031170 27x32 450 1.400
6034570 50 290 1.150 031328 30x36 450 1.400
6034650 55 300 1.400 031330 32x36 450 1.600
6034730 60 345 2.100
6034810 65 355 2.300
6035030 70 365 2.600
6035110 75 375 3.000
6035380 80 385 3.450 IMPACT SOCKETS 50
6035460 85 385 3.800
6035540 90 410 4.870
6035620 95 410 4.560
6035700 100 412 4.500
2AR
EXTENSION TUBES
For heavy duty ring spanner 2A.
Steel tube, chrome plated.
1“ SOCKET SET 47
Code No. ! y 0
6048600 0 24-30 460 0.600
6048790 1 32-41 610 1.150
6048870 2 46-55 760 2.150
6048950 3 60-100 860 2.850
12
Flare Nut Spanners
NO. 400
› Chrome Vanadium steel 31CrV3. 3
› Ring offset at 15 . Hexagon gap offset at 30 .
o o
› Chrome plated, polished open rings.

› In accordance with DIN 3118.
Ring 15° offset from shaft Hexagon gap 30° offset,

UD-section at 15° offset
400 (MM) / 400 (AF) 3

FLARE NUT SPANNERS
005001 8x10 140 0.045 005004 12x14 170 0.100
6056970 9x11 145 0.050 005005 14x17 195 0.135
005002 10x11 150 0.055 005006 17x19 210 0.160
6051070 10x12 150 0.110 005007 22x24 250 0.320
005003 11x13 160 0.075
inch
Code " y 0 Code " y 0
005051 5/16x3/8 140 0.045 005055 9/16x5/8 195 0.135
005053 7/16x1/2 160 0.075 005056 5/8x3/4 210 0.160
400 3
FLARE NUT SPANNER SETS

› Ring offset at 15 . Hexagon gap offset at 30 .
o o
› Chrome plated, polished open rings.

Code ! Contents 0
634026 5M 8X10 11X13 12X14 17X19 22X24 1.200
13
SPANNERS
Open Ended Spanners
NO. 6 – STRONG AND ACCURATE

› Chrome plated.
› Slim pattern.
Non-glare look due to Slim pattern
matt chrome plating
Jaw: ground precisely to exact nominal Secure grip due to slim

size for optimum contact areas profile shaft
6 (MM)
DOUBLE OPEN ENDED SPANNERS
606383 6x7mm 122 0.020 606707 21x23mm 247 0.240
606421 8x9mm 140 0.025 606731 24x26mm 266 0.300
606448 8x10mm 140 0.030 606758 24x27mm 266 0.300
606472 10x11mm 157 0.040 606774 25x28mm 280 0.355
606537 12x13mm 172 0.060 004518 27x32mm 302 0.460
606588 14x15mm 188 0.070 606812 30x32mm 302 0.460
606626 16x17mm 205 0.110 004520 32x36mm 328 0.650
606642 17x19mm 222 0.155 004521 36x41mm 360 0.850
606650 18x19mm 222 0.155 004522 38x42mm 360 0.800
606677 19x22mm 236 0.210 004523 41x46mm 400 1.100
606685 20x22mm 236 0.210 004524 46x50mm 450 1.600
6
DOUBLE OPEN ENDED SPANNER SETS
Code ! Contents 0
607703 4M 10x11 12x13 14x15 16x17 0.280
607711 6M 8x9 10x11 12x13 14x15 16x17 19x22 0.510
607738 8M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 0.690
607754 10 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 1.230
607878 11 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 30x32 1.690
607770 12 M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x26 25x28 27x32 2.040
14
Adjustable Wrenches
NEW
62P
ADJUSTABLE WRENCHES
A heavy-duty, Industrial 15º Adjustable Wrench
Chrome vanadium, exceeding international standards as ISO 6787-1982
› A smaller angle 15º wrench aligns the wrench with the nut in a manner that offers speed, precision,
ergonomic comfort and provides greater leverage distance thus reducing hand & arm fatigue.
› Non-Protruding on the movable jaw end. This allows a greater ease of use in tight spaces.
› Thicker Handle provides a comfortable fit making it easy to apply force.
› Chrome vanadium, exceeding international standards as ISO 6787-1982
› Uniform mechanical grinding of face gives wrenches a very flat and strong industrial appearance.
› With ruler scale.
› Blister packed.
Close up
Code ! y 0
6368000 150 22 155 0.155
6368190 200 28.6 205 0.250
6368270 250 32.8 255 0.460
6368350 300 38.1 306 0.700
6368430 375 50.0 383 1.030
6368510 450 60.0 460 1.675
15
SPANNERS
Slogging Spanners
306 (MM) / 306 (AF) 133 (MM)

RING SLOGGING SPANNERS OPEN ENDED SLOGGING SPANNERS
Chrome Vanadium steel 31CrV3. Chrome Vanadium steel 31CrV3.
Designed for heavy duty applications. Designed for heavy duty applications.
Shot blast finish. Shot blast finish.
In accordance with DIN 7444. In accordance with DIN 133.
*WHILE STOCKS LAST *WHILE STOCKS LAST
010001 24 185 0.300 009000 25 180 0.400
010002 27 185 0.400 009002 27 180 0.400
010003 30 195 0.500 009003 30 190 0.500
010004 32 195 0.500 009004 32 195 0.600
010035 34 195 0.400 009035 34 195 0.600
010005 36 200 0.700 009005 36 210 0.800
009006 41 225 1.000
6474460 38 205 0.660
009007 46 255 1.300
010006 41 225 0.800 009008 50 280 1.700
010007 46 240 1.100 6400850 55 310 2.700
010008 50 250 1.200 6400930 60 310 2.700
6475940 55 260 1.500 6401070 65 360 3.400
6476080 60 270 1.600 6401150 70 360 4.600
6476160 65 290 2.200 6401230 75 395 5.900
6476240 70 325 2.500 6401310 80 410 7.000
6476320 75 325 3.200 6401580 85 410 6.800
6476400 80 345 3.600 6401660 90 455 10.000
6476590 85 345 3.900
6401740 95 * 455 9.500
6401820 100 500 14.600
6476670 90 380 7.000 6401900 105 500 13.500
6476750 95 380 7.000 6402040 110 500 13.300
6476830 100 * 410 6.600 6402120 115 525 16.800
6476910 105 * 415 9.600 6402200 120 525 17.100
6477050 110 * 435 9.600
6477130 115 * 435 9.600
6477210 120 480 9.800
6477480 125 510 9.800
6477560 130 510 13.600 CLUB HAMMERS 1 33
inch
Code " y 0
010051 15/16” * 185 0.400
010050 1” * 185 0.400
010053 1.1/8” * 185 0.400
010054 1.1/4” * 195 0.500
010056 1.7/16” 200 0.700
010057 1.1/2” * 200 0.600
010058 1.5/8” * 225 0.800
010059 1.11/16” * 225 0.800 AUTOMOTIVE 99
010060 1.3/4” * 240 1.100
010062 1.7/8” * 240 1.100
010063 2” * 250 1.200
6479930 2.3/16” * 260 1.600
6480000 2.1/4” * 260 1.600
6480190 2.3/8” * 270 1.600
6480350 2.9/16” 290 2.200
6480430 2.5/8” 290 2.200
6480510 2.3/4” 325 2.400
6480780 3” 325 3.100
16
Hook Spanners
40 44
HOOK SPANNERS CALIPER FACE SPANNERS
In accordance with DIN 1810, Form A. Chrome Vanadium steel 31CrV3.
Chrome Vanadium steel 31CrV3. Manganese phosphated.
Manganese phosphated. Similar to DIN 3116.
For slotted round nuts.
Code ) y 0 Code , y 0
6333990 16 - 20 110 0.020 6354480 3 178 0.135
6334020 25 - 28 135 0.040 6354560 4 178 0.140
6334100 30 - 32 135 0.045 6354640 5 230 0.275
6334290 34 - 36 170 0.075 6354720 6 230 0.275
6334370 40 - 42 170 0.080 6354990 8 230 0.285
6334450 45 - 50 205 0.115
6334530 52 - 55 205 0.120
6334610 58 - 62 240 0.200
6334880 68 - 75 240 0.210
6334960 80 - 90 280 0.290
6335180 95 - 100 280 0.300 Crowfoot Spanners
6335260 110 - 115 335 0.480
40Z 3114
PIN SPANNERS CROWFOOT SPANNERS
In accordance with DIN 1810, Form A. Chrome Vanadium steel 31CrV3.
Chrome Vanadium steel 31CrV3. Chrome plated.
Manganese phosphated. Opening at right angle to handle for maximum accessibility.
For cross-drilled nuts.
*WHILE STOCKS LAST / INDENT ONLY
Code ) y 0 Code ! y 0
6335850 16 - 18 110 0.020 6670050 13 * 160 0.100
6335930 20 - 22 110 0.025 6670130 14 * 160 0.100
6336580 25 - 28 135 0.040 6676920 16 * 200 0.170
6336660 30 - 32 135 0.045 6670210 17 * 200 0.150
6336740 34 - 36 170 0.075 6677060 18 * 200 0.220
6336820 40 - 42 170 0.080 6670480 19 * 200 0.250
6336900 45 - 50 205 0.115 6677140 21 * 200 0.260
6337040 52 - 55 205 0.120 6670560 22 * 200 0.300
6337120 58 - 62 240 0.200 6670640 24 * 250 0.450
6337200 68 - 75 240 0.210 6670720 27 * 250 0.500
6337390 80 - 90 280 0.290 6670800 30 * 250 0.650
6337470 95 -100 280 0.300 6670990 32 * 250 0.700
6671020 36 * 315 1.150
6671290 46 * 315 1.500
6671370 50 * 315 1.600
17
SOCKETS &
ACCESSORIES
18 - 49
SOCKETS &
ACCESSORIES
(1/4”) SETS / RATCHETS (1/4”) SOCKETS / ACCESSORIES (3/8”) SETS / RATCHETS

20 22 24
(3/8”) SOCKETS / ACCESSORIES (1/2”) SETS / RATCHETS (1/2”) SOCKETS / ACCESSORIES

25 28 36
(3/4”) SETS / RATCHETS (3/4”) SOCKETS / ACCESSORIES (1”) SETS / RATCHETS /

42 44 SOCKETS / ACCESSORIES
47
SOCKETS
Socket Manufacturing Process
A key feature of GEDORE’S socket manufacture is the use of chrome vanadium steel in a hot forging process. As the heated metal is forged, the grains are bent to follow the shape of the forging die, thus maintaining an
unbroken grain structure throughout the article.
This grain structure and the resulting elastic and toughness properties of a GEDORE socket can easily be compared to the fibrous resilience
of a tree branch.
As chrome vanadium steel cannot be cold forged, GEDORE’S competitors using cold forging processes are forced to use
metallurgically modified steels to accommodate this type of manufacture, resulting in inferior elastic and
toughness properties.
In summary
GEDORE sockets are hot forged to obtain a superior strength to weight ratio.
Hot forged. Cold forged.
Competitor sockets are cold forged primarily to reduce manufacturing cost.
1. 2. 3. 4. 5.
Blank cropped to size Hot forged in the forging Machined to size. Outside diameter turned Counterbored, square
from 31CrV3. press. and knurled using high- socket drive fluted, manu-
tech CNC machinery. facturer and socket size
permanently stamped.
6. 7. 8. 9.
Degreased – grease Hardened under Sand blasted in Nickel plated and matt-chrome plated.
would destroy protective gas preparation for The electrolytically applied nickel coating ensures
the protective gas atmos- atmosphere, followed by surface coating. corrosion protection.
phere in hardening. annealing. The electroplated chrome improves the
look and gives the socket a perfect finish.
(1/4") square drive

R
Sets (1/4")
20 E R
1
SOCKET SETS 1/4"
For manually operated sockets and accessories with 1/4” square drive.
Chrome Vanadium steel 31CrV3.
Dimensions: 200x120x38mm.
Code No. Ratchet Sockets Accessories 0

6172100 No.20 EMZ ! 2093 Z-94 1 20 4 4,5 5 6 7 8 9 10 11 13 + 2087 0.71
2090-4
) 2095
- 2098
6172250 No.20 MDX ! 2093 Z-94 1 20 4 5 6 7 8 9 10 11 12 13 ‚ 2090-4 1.197
IKS20 PZD1 PZD2 PZD3 ) 2095
IKS20 PH1 PH2 PH3 - 2098
IS20-4 IS20-5.5 IS20-6.5 IS20-7 20 MDX Foam Insert
ITX20 T8 T10 T15 T20 T25 T27 T30 T40 MDX Plastic Case
IN20L 3 4 5 6 7 8
6172450 No.20 EAU-3 # 2093 U-3 1 20 3/16 7/32 1/4 9/32 5/16 11/32 + 2087 0.76
3/8 7/16 1/2 ‚ 2090-4
) 2095
- 2098
20
NEW
20 NZ R
SOCKET SETS 1/4"
For manually operated sockets and accessories with 1/4” square drive.
Chrome Vanadium steel 31CrV3.
Dimensions: 200x120x38mm.
20NZA 20NZI

6172460 No.20 NZA ! 2093 Z-94 1/4“ drive sockets 4 4,5 5 6 7 + 2087 1.050
8 9 10 11 12 13 14 2090-2 / 4 Extensions
3/16, 7/32, 1/4, 9/32, 5/16, 11/32, ) 2095
3/8, 7/16, 1/2 - 2098
2088 Flexible Extension
Foam Insert
Plastic Case
6172465 No.20 NZI ! 2093 Z-94 1/4“ drive sockets 4 4.5 5 6 7 ‚ 2090-2 / 4 Extensions 1.150
8 9 10 11 12 13 14mm ) 2095
3/16 7/32 1/4 9/32 5/16 11/32 - 2098
3/8 7/16 1/2 + 2087
Torx T8 T10 T15 T20 T25 T27 2088 Flexible Extension
T30 T40 Foam Insert
Screwdriver bits IS20 4 5.5 Plastic Case
6.5 7
Screwdriver sockets IKS20 PH0
PH1 PH2 PH3
Ratchets (1/4")
2093 U-3 R 2093 U-10 m

b
REVERSIBLE RATCHET 1/4" REVERSIBLE RATCHET 1/4"
› Especially for working in confined spaces, as in the automotive business. › Particularly for heavy duty use in industry and with utility vehicles.
› According to DIN 3122, ISO 3315. › According to DIN 3122, ISO 3315.
› With non-slip metal disc change, fine-toothed (72 teeth) and robust. › With recessed lever change, locks in middle position.
› Return angle of five degrees. › Return angle of five degrees.
› Non-slip 2-component handle with hanging hole. › Non-slip 2-component handle with hanging hole.
› For hand-operated sockets and accessories with square drive › For hand-operated sockets and accessories with square drive
as per DIN 3120 - C 6.3, ISO 1174. as per DIN 3120 - C 6.3, ISO 1174.
› Ball locking device. › Ball locking device.
› Gedore vanadium steel 31CrV3, chrome plated. › Gedore vanadium steel 31CrV3, chrome plated.
Code No. a„ a A° y 0 Code No. a„ a A° y 0

6170590 2093 U-3 1/4 6.3 5 129 0.095 6180470 2093 U-10 1/4 6.3 15 129 0.109
21
SOCKETS
2093 Z-94 R 20L (MM) R

1
RATCHET HANDLE WITH SOCKETS 1/4"
COUPLER 1/4" hexagon, long pattern
› Used throughout industry and the automotive world.
› According to DIN 3122, ISO 3315. › Manually operated sockets with knurled base.
› With square coupler, medium-fine toothed, extremely rugged. › Chrome Vanadium steel 31CrV3.
› Return angle of eighteen degrees. › Chrome plated and polished.
› For hand-operated sockets and accessories with square drive as per DIN 3120 - C 6.3, ISO 1174. › In accordance with SANS 1113 and DIN 3120.
› Ball locking device.
› Gedore vanadium steel 31CrV3, chrome plated.
Code ! y 0
6191400 4.0 50 0.017
6191590 4.5 50 0.017
6191670 5.0 50 0.018
6191830 6.0 50 0.020
Code No. a„ a A° y 0 6191910 7.0 50 0.024
6170750 2093 Z-94 1/4 6.3 18 129 0.076 6192050 8.0 50 0.027
6192130 9.0 50 0.030
6192210 10.0 50 0.033
Sockets (1/4") 6192480 11.0 50 0.047
6192560 12.0 50 0.050
6192640 13.0 50 0.054
20 (MM) R
1
SOCKETS 1/4" IN20L (MM) R
hexagon SCREWDRIVER BIT SOCKET 1/4"

› Manually operated sockets with knurled base.
› Chrome Vanadium steel 31CrV3. for in-hex screws, long pattern
› Chrome plated and polished.
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove
Code ! y 0 › Chrome Vanadium steel 31CrV3.
6165400 No.20 4mm 25 0.009
6165590 No.20 4.5mm 25 0.010
6165670 No.20 5mm 25 0.010
6165830 No.20 6mm 25 0.010
6165910 No.20 7mm 25 0.012 Code $ y 0
6166050 No.20 8mm 25 0.014 1933256 3 60 0.024
6166130 No.20 9mm 25 0.016 1933264 4 60 0.025
6166210 No.20 10mm 25 0.020 1933272 5 60 0.027
6166480 No.20 11mm 25 0.025 1933280 6 60 0.029
6166560 No.20 12mm 25 0.030 1933298 7 60 0.038
6166640 No.20 13mm 25 0.035 1933299 8 60 0.050
6166720 No.20 14mm 25 0.037
20 (AF) IKS 20 R
R
1
SOCKETS 1/4" SCREWDRIVER BIT SOCKET 1/4"
hexagon for cross-head screws PH
Code ! y 0
6167020 No.20 3/16AF 25 0.009 › Manually operated sockets with knurled base.
6167100 No.20 7/32AF 25 0.009 › Chrome plated and polished.
6167290 No.20 1/4AF 25 0.025 › Chrome Vanadium steel 31CrV3.
6167370 No.20 9/32AF 25 0.010
6167450 No.20 5/16AF 25 0.013
6167530 No.20 11/32AF 25 0.015 Code No. ; PH y 0
6167610 No.20 3/8AF 25 0.018 6174579 IKS 20 0 0 28 0.011
6167880 No.20 7/16AF 25 0.023 6174580 IKS 20 1 1 28 0.011
6167960 No.20 1/2AF 25 0.029 6174660 IKS 20 2 2 28 0.012
6161840 No.20 9/16AF 25 0.036 6174740 IKS 20 3 3 28 0.012
22
R
ITX20 R
Accessories (1/4")
SCREWDRIVER BIT SOCKET 1/4“
for recessed TORX® head screws 2097 R
› Manually operated sockets with knurled base. SWIVEL HANDLE 1/4"
› Chrome plated and polished. › For manually operated sockets and accessories with 1/4” square drive.
› In accordance with SANS 1113 and DIN 3120. › Chrome Vanadium steel 31CrV3.
› TORX® = registered trademark of Acument Intellectual › In accordance with SANS 1113 and DIN 3122.
Properties, LLC. USA
Code No. a„ a y 0
Code No. 7 + & y 0 6171050 2097 1/4 6.3 146 0.094
6190430 ITX 20 T8 T8 M2,5 2,31 30.5 0.013
6190780 ITX 20 T10 T10 M3 - M3,5 2,74 30.5 0.014
6190860 ITX 20 T15 T15 M3,5 - M4 3,27 30.5 0.014
6190940 ITX 20 T20 T20 M4 - M5 3,86 30.5 0.014 2090
6191080 ITX 20 T25 T25 M4,5 - M5 4,43 30.5 0.014
6191160
6191240
ITX 20 T27
ITX 20 T30
T27
T30
M4,5 - M6
M6 - M7
4,99
5,52
30.5
30.5
0.014
0.015
EXTENSIONS 1/4"
6265890 ITX 20 T40 T40 M7 - M8 6,65 33.5 0.025
› For manually operated sockets and accessories with 1/4” square drive.
2090-4
IS 20 R
SCREWDRIVER BIT SOCKET 1/4" Code No. a„ a y 0

6170320 2090-2 1/4 6.3 55 0.025
for slotted head screws 6170400 2090-4 1/4 6.3 97 0.041
6171210 2090-6 1/4 6.3 148 0.061
6171211 2090-10 1/4 6.3 220 0.090
› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove 6173340 2090-12 1/4 6.3 305 0.124
2087
SLIDING T-BAR 1/4"
Code No. ?K L y 0
6171560 IS 20 4x0,8 4.0 0.8 28 0.011 › For manually operated sockets and accessories with 1/4” square drive.
6171640 IS 20 5,5x1 5.5 1.0 28 0.012 › Chrome Vanadium steel 31CrV3.
6174230 IS 20 6,5x1,2 6.5 1.2 28 0.012 › In accordance with SANS 1113 and DIN 3123.
6174310 IS 20 8x1,6 8.0 1.6 28 0.012
Code No. a„ a y 0
R
IKS 20 PZD 6170160 2087 1/4 6.3 115 0.039
SCREWDRIVER BIT SOCKET 1/4"

for cross-head screws Pozi PZ 2094 R
COUPLER 1/4"
› Chrome plated and polished. › For manually operated sockets and accessories with 1/4” square drive.
› Chrome Vanadium steel 31CrV3. › Chrome Vanadium steel 31CrV3.
Code No. < PZ y 0

6187130 IKS 20 PZD 1 1 28 0.012
6187210 IKS 20 PZD 2 2 28 0.013 Code No. a„ a y 0
6187480 IKS 20 PZD 3 3 28 0.014 6170830 2094 1/4 6.3 19.8 0.006
23
SOCKETS
2098 R
DRIVING HANDLE 1/4"
(3/8") Square Drive
S
Sets (3/8")
› According to DIN 3122, ISO 3315.
› For hand-operated sockets with square drive as per DIN 3120, ISO 1174
› Ball locking device
c
D30 FMZ !
SOCKET SET 3/8"
Code No. a„ a y 0
› Manually operated 3/8” sockets and accessories.
6171480 2098 1/4 6.3 140 0.070
› Supplied in blue powder coated, D19 K steel box.
› Dimensions: 281x77x37mm.
2088 R
FLEXIBLE EXTENSION 1/4"


623202 D30 FMZ ! 3093 Z-94 3 D 30 6 7 8 3090-125 1.490
9 10 11 12 13
Code No. a„ a y 0 14 15 16 17
6170240 2088 1/4 6.3 140 0.045 18 19 20 21 22
2095 R D30 HMZ c

!
UNIVERSAL JOINT 1/4" SOCKET SET 3/8"
› For manually operated sockets and accessories with 1/4” square drive. › Manually operated 3/8” sockets and accessories.
› Chrome Vanadium steel 31CrV3. › Supplied in blue powder coated, D19 J steel box.
› In accordance with SANS 1113 and DIN 3123. › Dimensions: 290x186x52mm.
Code No. a„ a y 0
6170910 2095 1/4 6.3 38 0.026
2030
CONVERTER 1/4" TO 3/8"
1/4“ 3/8“ Code No. Ratchet Sockets Accessories

6,3 mm 10 mm
0
623962 D30 HMZ ! 3093 Z-94 3 D 30 6 7 8 9 + 3087 2.750
10 11 12 13 14 15 3090-250
„ „ 16 17 3090-125
Code No. Q Q a a y 0 18 19 20 21 22 ) 3095
6170080 2030 1/4 6.3 3/8 10 26 0.020 C 3081
24
S
NEW
D30 NZZ
c Sockets (3/8")
SOCKET SET 3/8" !
› Supplied in blue powder coated, D19 Y steel box.
› In high-density foam insert.
D 30 (MM) 3 S
SOCKETS 3/8"
bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base.
*Hexagon
Code Ratchet Sockets Accessories 0
623968 ! 3 D 30 6 7 8 9 10 11 12 13 3087 Sliding T bar 3.025
3093 14 15 16 17 18 19 20 21 22mm 3090 125mm Extension Code ! y 0
Z94 1/4 9/32 5/16 11/32 3/8 7/16 1/2 3090 250mm Extension
6230160 No.30 6mm* 28 0.025
9/16 19/32 5/8 11/16 3/4 25/32 Plastic Insert
6230240 No.30 7mm* 28 0.024
13/16 7/8 Metal Case
6230320 No.30 8mm* 28 0.024
6230400 No.30 9mm* 28 0.027
6230590 No.30 10mm* 28 0.029
6230670 D30 11mm 28 0.029
Ratchets (3/8") 6230750 D30 12mm 28 0.033
6230830 D30 13mm 28 0.038
6230910 D30 14mm 28 0.039
3093 U-3 6231050

6231130
D30 15mm
D30 16mm
30
30
0.040
0.046
6231210 D30 17mm 30 0.056
REVERSIBLE RATCHET 3/8" 6231480
6231560
D30 18mm
D30 19mm
30
30
0.058
0.066
6231640 D30 20mm 30 0.066
› For manually operated sockets and accessories with 3/8” square drive. 6231720 D30 21mm 30 0.078
› Chrome Vanadium steel 31CrV3. 6231800 D30 22mm 31 0.088
› With non-slip metal disc change, fine-toothed (72 teeth) and robust.
› Return angle of five degrees.
D 30 (AF) 3 S
SOCKETS 3/8"
Code No. a„ a A° y 0 bi-hexagon UD profile
6237090 3093 U-3 3/8 10 5 200 0.244
› Manually operated sockets with thin walls and knurled base.

3093 Z-94 › Chrome plated and polished.
RATCHET HANDLE WITH *Hexagon
COUPLER 3/8“ Code ! y 0

2016613 D30 1/4AF 28 0.025
2101009 D30 9/32AF 28 0.024
› For manually operated sockets and accessories with 3/8” square drive. 1997122 D30 5/16AF 28 0.024
› Chrome Vanadium steel 31CrV3. 2101017 D30 11/32AF 28 0.026
› With non-slip metal disc change, fine-toothed (72 teeth) and robust. 1997130 D30 3/8AF 28 0.032
› Return angle of ten degrees. 6232610 D30 7/16AF 28 0.028
› In accordance with SANS 1113 and DIN 3122. 6232880 D30 1/2AF 28 0.038
6232960 D30 9/16AF 28 0.035
6233180 D30 19/32AF 30 0.041
6233260 D30 5/8AF 30 0.046
6233340 D30 11/16AF 30 0.056
6233420 D30 3/4AF 30 0.065
1997157 D30 25/32AF 30 0.070
Code No. a„ a A° y 0 1997165 D30 13/16AF 30 0.074
6237680 3093 Z-94 3/8 10 10 200 0.223 6232020 D30 7/8AF 31 0.083
25
SOCKETS
TX 30 S Accessories (3/8")
SOCKETS 3/8"
for protruding TORX® head screws
3094
COUPLER 3/8"
› For manually operated sockets and accessories › Chrome Vanadium steel 31CrV3.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
with 3/8” square drive. › In accordance with SANS 1113 and DIN 3122.
Code ! 9 + & y 0
6250270 TX30 E5 E5 M4 4.73 28 0.025
6250350 TX30 E6 E6 M5 5.74 28 0.025
6250430 TX30 E7 E7 M6 6.16 28 0.025 Code No. a„ a y 0
6250510 TX30 E8 E8 M6-M7 7.52 28 0.027 6237760 3094 3/8 10 29 0.019
ITX 30 S 3095
SCREWDRIVER BIT SOCKETS UNIVERSAL JOINT 3/8"
3/8" › For manually operated sockets and accessories
with 3/8” square drive.
for recessed TORX® head screws › CHROME VANADIUM steel – 531CrV3.
› In accordance with ISO 3316 and DIN 3123.
› With ball locking device.
Code ! 9 + & y 0
6246320 ITX30 T 20 T20 M4-M5 3.86 49 0.050
6246830 ITX30 T 25 T25 M4,5-M5 4.43 49 0.051
6247210 ITX30 T 27 T27 M4.5-M6 4.99 49 0.051
6247560 ITX30 T 30 T30 M6-M7 5.52 49 0.051 „ „
Code No. a a Q Q y 0
6247720 ITX30 T 40 T40 M7-M8 6.65 49 0.052
6238140 3095 3/8 10 3/8 10 50 0.053
IN 30 (MM) 3019
SCREWDRIVER BIT SOCKETS N CONVERTER 3/8" TO 1/2"
S
3/8" › For manually operated sockets and accessories
for in-hex screws › CHROME VANADIUM steel – 31CrV3.

› In accordance with SANS 1113 and DIN 3123. 3/8“ 1/2“
10 mm 12,5 mm
Code No. L 0
6241010 IN30 4mm 47 0.038
6241280 IN30 5mm 47 0.390
6241360 IN30 6mm 47 0.041
6241440 IN30 8mm 49 0.053
„ „
6242920 IN30 10mm 49 0.073 Code No. a a Q Q y 0
6236010 3019 1/2 12,5 3/8 10 36 0.057
26
S
3020 3090
REDUCER 3/8" TO 1/4" EXTENSIONS 3/8"
› For manually operated sockets and accessories › For manually operated sockets and accessories
with 3/8” square drive. with 3/8” square drive.
› In accordance with SANS 1113 and DIN 3122. › In accordance with SANS 1113 and DIN 3122.
3/8“ 1/4“
10 mm 6,3 mm
3090-250
3090-125
„ „
6236280 3020 1/4 6,3 3/8 10 28 0.026
3090-75
„
Code No. a a y 0
6236600
3081 6236790
3090/ 75
3090/125
3/8
3/8
10
10
75
125
0.071
0.110
6236870 3090/250 3/8 10 250 0.197
L-HANDLE 3/8"
› For manually operated sockets and accessories
› In accordance with SANS 1113 and DIN 3122. 3096
SWIVEL HANDLE 3/8"
„
Code No. a a y 0
6236360 3081 3/8 10 180 0.163
„
Code No. a a y 0
3087 6238220 3096 3/8 10 250 0.171
SLIDING T-BAR 3/8"

30 SPARES 3/8"
› In accordance with SANS 1113 and DIN 3122. › For the 3096 power bar and 3093 U-3 ratchet.
› For F and H socket sets. Blue powder coated steel case.
› Black matt-finish insert.
545767 3096 Repair Kit

545759 3093 U-3 Repair Kit
514632 D 19 K Box
514640 D 19 J Box
„
Code No. a a y 0 515175 D 30 F Insert
6236520 3087 3/8 10 163 0.128 515280 D 30 H Insert
27
SOCKETS
d
19 HMZ / KMZ
(1/2") square drive
T SOCKET SETS 1/2"
!
Sets (1/2")
15 / 14 pieces

19 SR T › Supplied in blue powder coated, D19 K steel box.
! › Dimensions: 281x77x46mm.
SOCKET SETS 1/2"
13 pieces

› Blister packed.
Code No. Sockets 0

612286 C19 HMZ C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 1.940
17 19-3/4 22
Accessories ! 1993 Z-94 1990/125 Extension
614610 D19 HMZ D19 8 10 11 12 13 14 15 16 17 19 22 1.930
612316 C19 KMZ C19 10-3/8 12 13-1/2 14 15-19/32 17 19-3/4 22 2.010
Code No. Sockets 0 24-15/16 27-1.1/16
611921 SR-C19Z 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 1.390 Accessories ! 1993 Z-94 1990/125 Extension
17 19-3/4 22
614653 D19 KMZ D19 10 12 13 14 15 17 19 22 24 27 2.050
Accessories ! 1993 Z-94 1990/75 Extension Socket Rail
616834 SR-D19Z 10 12 13 14 15 16 17 19 22 24 1.460
Accessories ! 1993 Z-94 1990/75 Extension Socket Rail
d T
19 AK / MK ! 19 1BMZ !
SOCKET SETS 1/2" SOCKET SETS 1/2"
20 pieces 23 pieces
› Manually operated 1/2” sockets. › Manually operated 1/2” sockets and accessories.
› Supplied in blue powder coated, D19 K steel box. › Supplied in blue powder coated, D19 J steel box.
Code No. Sockets 0

612936 C19 MK C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 2.270
17 19-3/4 22 23 24-15/16 26 -1. 27-1.1/16 28
30-1.3/16 32-1.1/4
614122 D19 MK D19 8 10 11 12 13 14 15 16 17 19 22 23 24 26 2.430
27 28 30 32 Code No. 1B Spanners Ratchet Sockets Accessories 0
616419 D19 AK D19 5/16AF 11/32AF 3/8AF 7/16AF 1/2AF 9/16AF 2.250 615595 D19 1BMZ 10 11 13 ! 1993 Z-94 10 11 12 13 4.540
19/32AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 14 17 19 14 15 16 17 1990-125
15/16AF 1.AF 1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF 22 1 9 22 145-250
137-250
28
T
19 GMU-10T T 19/22 TMU-10T T
! !
18 pieces 29 pieces
› Manually operated 1/2” sockets and accessories. › Manually operated 1/2” sockets and
› Supplied in blue powder coated, D19 J steel box. accessories.
› Dimensions: 290x186x52mm. › Supplied in blue powder coated,
D19 T steel box.

611999 C19/22 TMU-10T $ 1993 8-5/16 9-11/32 10- + 1987 5.400
U-10 T 3/8 11 12 13-1/2 14 1990-125
15-19/32 16-5/8 17 1990-250
18-11/16 ) 1995
*WHILE STOCKS LAST 19-3/4 20-25/32 21-
13/16 22 24-15/16 26
Code No. Ratchet Sockets Accessories 0 -1. 27-1.1/16 28 29-
616699 D19 GMU-10T $ 1993 U-10 T 10 11 12 13 14 + 1987 5.700 1.1/8 30-1.3/16 32-1.1/4
15 17 18 19 21 1990-125 616532 D19/22 TMU- $ 1993 8 9 10 11 12 13 14 + 1987 5.400
22 24 1990-250 10T U-10 T 15 16 17 18 19 20 1990-125
21 22 24 26 27 28 1990-250
611956 C19 GMU-10T * $ 1993 U-10 T 10 11 12 13 14 + 1987 5.700 29 30 32 ) 1995
15 17 18 19 21 1990-125
22 24 1990-250
T
19/22 TMZ ! 19 TM97U-10T T
!
29 pieces 22 pieces
› Manually operated 1/2” sockets › Manually operated 1/2” sockets and

and accessories. accessories.
› Supplied in blue powder coated, › Supplied in blue powder coated,
D19 T steel box. D19 T steel box.
› Dimensions: 435x170x50mm. › Dimensions: 435x170x50mm.

611980 C19/22 TMZ ! 1993 Z-94 8-5/16 9-11/32 1990-125 5.200
10-3/8 11 12 1990-250
13-1/2 14 15- + 1987 Code No. Ratchet Sockets Accessories 0
19/32 16-5/8 17 ) 1995 612413 C19 TM97U-10T $ 1993 U-10 T 10-3/8 11 12 1990-125 4.540
18-11/16 19-3/4 13-1/2 14 15- 1990-250
20-25/32 21-13/16 19/32 16-5/8 17 1997-375
22 24-15/16 26 18-11/16 19-3/4 50-20.8
-1.27-1.1/16 28 21-13/16 22
29-1.1/8 30-1.3/16 24-15/16 30-
32-1.1/4 1.3/16 32-1.1/4
616524 D19/22 TMZ ! 1993 Z-94 8 9 10 11 12 1990-125 5.200 615455 D19 TM97U-10T $ 1993 U-10 T 10 11 12 13 14 1990-125 4.740
13 14 15 16 17 1990-250 15 16 17 19 1990-250
18 19 20 21 22 + 1987 20 22 24 27 1997-375
24 26 27 28 29 ) 1995 30 32 50-20.8
30 32
29
SOCKETS
19 TMU / TAU-10T T
!
SOCKET SETS 1/2"
27 pieces

› Supplied in blue powder coated, D19 T steel box.

612464 C19 TMU-10T $ 1993 U-10 T 8-5/16 10-3/8 11 12 13-1/2 14 +1987 5.620
15-19/32 16-5/8 17 18-11/16 19-3/4 1990-125
21-13/16 22 24-15/16 26 -1. 1990-250
27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
) 1995
/ 1985
615196 D19 TMU-10T $ 1993 U-10 T 8 10 11 12 13 14 15 16 17 19 21 +1987 5.700
22 23 24 26 27 28 30 32 1990-125
1990-250
) 1995
/ 1985
616206 D19 TAU-10T $ 1993 U-10 T 5/16AF 3/8AF 13/32AF 7/16AF 1/2AF +1987 5.650
9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 1990-125
25/32AF 13/16AF 7/8AF 15/16AF 1. AF 1990-250
1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF ) 1995
/ 1985
19 TMZ / TMAZ T
!
SOCKET SETS 1/2"
27 pieces

612456 C19 TMZ ! 1993 Z-94 8-5/16 10-3/8 11 12 13-1/2 14 +1987 5.480
15-19/32 16-5/8 17 18-11/16 19-3/4 1990-125
21-13/16 22 24-15/16 26 -1. 1990-250
27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4
) 1995
/ 1985
614831 D19 TMZ ! 1993 Z-94 8 10 11 12 13 14 15 16 17 19 21 +1987 5.560
22 23 24 26 27 28 30 32 1990-125
1990-250
) 1995
/ 1985
614572 D19 TMA-Z ! 1993 Z-94 10 13 14 15 16 17 19 22 24 27 30 +1987 5.420
32 3/8 7/16 1/2 9/16 11/16 13/16 1. 1990-125
1990-250
) 1995
/ 1985
30
T
C19 YMAU-10T T
!
SOCKET SETS 1/2"
32 pieces


612367 C19 YMAU-10T $ 1993 U-10 T 8-5/16 9-11/32 10-3/8 11 12 1990-125 7.230
13-1/2 14 15-19/32 16-5/8 17 18 1990-250
19-3/4 21-13/16 22 24-15/16 26 -1. 1997-375
27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 50-20.8
7/16AF 9/16AF 7/8AF + 1987
) 1995Joint
T
D19 YMAU-10T !
SOCKET SET 1/2"
43 pieces


616222 D19 YMAU-10T $ 1993 U-10 T 8 9 10 11 12 13 14 15 16 17 1990-125 7.390
18 19 20 21 22 23 24 27 5/16AF 1990-250
11/32AF 3/8AF 13/32AF 7/16AF 1/2AF + 1987-375
9/16AF 19/32AF 5/8AF 11/16AF 3/4AF ) 1995
25/32AF 13/16AF 7/8AF 15/16AF 1. AF 50-20.8
/ 1985
31
SOCKETS
NEW
D19 NZU-Z94
SOCKET SET 1/2" T
!
› Supplied in blue powder coated steel box.
› In high-density foam insert.
Code Reversible Ratchet Sockets Accessories

615298 ! 1993 Z-94 D19 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 30 32mm +1987
3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1.1/16 1.1/8 1.3/16 1.1/4 1990-125
1990-250
) 1995
50/20.8mm
19 YM1B-10T T
SOCKET SETS 1/2" !

Code No. 1B Spanners Ratchet Sockets Accessories 0

612383 C19 YM1B-10T 10 11 12 13 14 15 16 17 19 22 24 $ 1993 U-10 T 10-3/8 11 12 13-1/2 14 1990-125 6.040
15-19/32 16-5/8 17 19-3/4 1997-375
22 24-15/16 50-20.8
616230 D19 YM1B-10T 10 11 12 13 14 15 16 17 19 22 24 $ 1993 U-10 T 10 11 12 13 14 15 16 17 19 22 24 1990-125 6.500

1997-375
50-20.8
19 62MU-10T T
!
SOCKET SETS 1/2"

Code No. Spanners Ratchet Sockets Accessories 0

612391 C19 62MU-10T No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 $ 1993 U-10 T 10-3/8 11 12 13-1/2 14 15-19/32 1990-125 6.760
No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 16-5/8 17 18-11/16 19-3/4 20-25/32 1990-250
21-13/16 22 + 1987
) 1995
616001 D19 62MU-10T No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 $ 1993 U-10 T 10 11 12 13 14 15 16 17 18 19 1990-125 7.120
No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 20 21 22 1990-250
+ 1987
) 1995
32
T
T T
IN19 PM-6 / PA-6 !
IN19 PM-5D / PA-5D !
› Manually operated 1/2” sockets. › Manually operated 1/2” sockets.

› Supplied in black matt-finish insert. › Supplied in black matt-finish insert.
› Also available in a blister pack.
Code No. Sockets 0

617423 PM 5D IN19 6 8 10 12 14 1.250
IN19L 6-100 8-100 10-100 12-100 14-100
617458 PA 5D IN19 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF 1.100
IN19L 1/4-100 5/16-100 3/8-100 1/2-100
9/16-100
T
IN19 PM-10 / PA-10 !
Code No. Sockets 0
617474
617849
PM-6
PA-6
IN19 5 6 8 10 12 14
IN19 3/16AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF
1.260
1.100
SOCKET SETS 1/2"
617476 SR PM-6 IN19 5 6 8 10 12 14 0.600
(Including Holding Rail and Adaptor)
› Manually operated 1/2” allen key sockets.

› Supplied in black matt-finish insert.
IN19 PM-9 / PA-9 T

! Code No. Sockets 0
SOCKET SETS 1/2" 617415
617431
PM-10
PA-10
IN19 5 6 7 8 9 10 12 14 17 19
IN19 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF
1.260
1.100
1/2AF 9/16AF 5/8AF 9/32AF
IKS19 2
617417 SR-PM10 IN19 5 6 7 8 9 10 12 14 17 19 1.220
› Manually operated 1/2” sockets.
› Supplied in blue powder coated Ref D30 K steel box.
T
INX19 !
SOCKET SETS 1/2"
› Manually operated 1/2” spline sockets.
› Supplied in black matt-finish insert.
Code No. Sockets 0 Code No. Sockets 0

615625 PM-9 IN19 5 6 7 8 9 10 12 14 17 1.500 617989 PM-5D INX19 5 6 8 10 12 1.320
615641 PA-9 IN19 3/16AF 7/32AF 1/4AF 9/32AF 5/16AF 3/8AF 1.470 INX19L 6-100 8-100 10-100 12-100
1/2AF 9/16AF 5/8AF IKS19 2
615627 SR-PM9 IN19 5 6 7 8 9 10 12 14 17 0.960 617601 6 INX19-6 5 6 8 10 12 0.510
(Including Holding Rail and Adaptor) IKS19 2
33
SOCKETS
T
ITX / TX19 FMT T ITX19 !
!
TORX® SOCKET SET 1/2" TORX® SOCKET SETS 1/2"
› Manually operated 1/2” sockets. › Manually operated 1/2” sockets.

› Supplied in blue powder coated, D19 J steel box. › Supplied in blue powder coated Ref D30 K steel box.
› Dimensions: 290x186x52mm. › Dimensions: 281x77x37mm.
Code No. Sockets 0

665983 MT ITX19 T20 T25 T27 T30 T40 T45 T50 1.000
665986 SR-MT ITX19 T20 T25 T27 T30 T40 T45 T50 0.540

SPARES
Code No. Sockets 0 19 REPAIR KITS
666009 FMT ITX19 T20 T25 T27 T30 T40 T45 T50 1.100
TX19 E10 E11 E12 E14 E16 E18 E20 E24
› For the 1993Z ratchet and 1996/7 power bar.
Code No.
545694 1993 Z Repair Kit
TX19 T 545708 1996/7 Repair Kit
! 19 BOXES & INSERTS

SOCKET SETS 1/2" › Blue powder coated steel case.
Code No.
514640 D 19 J Box
› Manually operated 1/2” sockets. 514632 D 19 K Box
› Supplied in blue powder coated, D30 K steel box. 514667 D 19 T Box
› Dimensions: 281x77x37mm. 514675 D 19 Y Box
› Also available in a blister pack. 515450 C 19 Y Insert
515965 D 19 GM Insert
515485 D 19 H Insert
515975 D 19 IM Insert
544191 D 19 J Insert
515507 D 19 K Insert
544213 D 19 T Insert
515310 D 19 T 97 Insert
515515 D 19/22 T Insert
544221 D 19 Y Insert
515337 D 19 YM1B Insert
544205 D 19 1B Insert
515353 D 19 62MU Insert
515426 IN19 - 5D Insert
515418 IN19 - 6 Insert
544248 IN19 - 9 Insert
515396 IN19PM - 10 Insert
Code No. Sockets 0 515876 ITX19 MT Insert
665991 FT TX19 E10 E11 E12 E14 E16 E18 E20 E24 0.510 515868 TX19 FT Insert
665994 SR-FT TX19 E10 E11 E12 E14 E16 E18 E20 E24 0.620 515841 ITX/TX19 FM Insert
(Including Holding Rail and Adaptor) 515981 K19 Insert
34
T
Ratchets (1/2")
1993 U-10 T 1993 U-3

REVERSIBLE RATCHET 1/2" REVERSIBLE RATCHET 1/2"
› For manually operated sockets and accessories with 1/2” › For manually operated sockets and accessories with 1/2” square
square drive. drive.
› In accordance with SANS 1113 and DIN 3122. › With recessed lever change.
› With recessed lever change. › Ball locking device.
› Push-button release. › Return angle of five degrees.
› Return angle of seven and a half degrees. › Non-slip 2-component handle.
› Non-slip 2-component handle. › In accordance with SANS 1113 and DIN 3122.
› Locks in the middle position: When the lever is flipped, › Chrome Vanadium steel 31CrV3.
it automatically engages for clockwise or anti-clockwise
operation.
› Ball locking device.

614262 1993U-10T 1/2 12.5 7,5 270 0.584 614424 1993U-3 1/2 12.5 5 270 0.544
1993 U-10 K 1993 Z-94

PLASTIC RATCHET 1/2" RATCHET HANDLE WITH
COUPLER 1/2"
› Maximum torque: 70Nm. › For manually operated sockets and accessorieswith 1/2” square drive.
› For manually operated sockets and accessories with 1/2” square drive. › With square coupler, medium-fine toothed, extremely rugged
› Return angle of seven and a half degrees. › Return angle of seven and a half degrees.
› Made from sturdy compound material with a steel mechanism. › Reversible ratchet.
› Lightweight. › Non-slip 2-component handle
› Dimensions: 44 x 145 x 42.2mm. › In accordance with SANS 1113 and DIN 3122.
› Reversible ratchet. › Chrome Vanadium steel 31CrV3.

624489 1993U-10K 1/2 12.5 7,5 145 0.226 614459 1993Z-94 1/2 12.5 7,5 270 0.430
35
SOCKETS
T
Sockets (1/2")
C 19 (MM) / (AF) 3T D 19 (MM) / (AF) 3T

SOCKETS 1/2" SOCKETS 1/2“
C profile bi-hexagon UD profile
› Manually operated sockets with thin walls and knurled base. › Manually operated sockets with thin walls and knurled base.
› CHROME VANADIUM steel – 31CrV3. › CHROME VANADIUM steel – 31CrV3.
› Chrome plated and polished. › Chrome plated and polished.
612006 C19 8mm-5/16 38.0 0.056 613304 D19 8mm 38.0 0.056
612014 C19 9mm-11/32 38.0 0.054 613312 D19 9mm 38.0 0.053
612022 C19 10mm-3/8 38.0 0.055 613320 D19 10mm 38.0 0.055
612030 C19 11mm 38.0 0.057 613339 D19 11mm 38.0 0.055
612057 C19 12mm 38.0 0.058 613347 D19 12mm 38.0 0.057
612065 C19 13mm-1/2 38.0 0.057 613355 D19 13mm 38.0 0.057
612073 C19 14mm 38.0 0.059 613363 D19 14mm 38.0 0.061
612081 C19 15mm-19/32 40.0 0.065
613371 D19 15mm 40.0 0.065
612103 C19 16mm-5/8 40.0 0.065
613398 D19 16mm 40.0 0.072
612111 C19 17mm 40.0 0.073
613401 D19 17mm 40.0 0.067
612138 C19 18mm-11/16 40.0 0.062
612146 C19 19mm-3/4 40.0 0.078 613428 D19 18mm 40.0 0.065
612154 C19 20mm-25/32 40.0 0.084 613436 D19 19mm 40.0 0.074
612162 C19 21mm-13/16 41.5 0.096 613444 D19 20mm 40.0 0.088
612170 C19 22mm 41.5 0.099 613452 D19 21mm 41.5 0.096
612189 C19 23mm 41.5 0.121 613460 D19 22mm 41.5 0.100
612197 C19 24mm-15/16 41.5 0.124 613479 D19 23mm 41.5 0.111
612200 C19 25mm 41.5 0.130 613487 D19 24mm 41.5 0.122
612219 C19 26mm-1. 41.5 0.135 613495 D19 25mm 41.5 0.135
612227 C19 27mm-1.1/16 41.5 0.145 613509 D19 26mm 41.5 0.140
612235 C19 28mm 43.0 0.148 613517 D19 27mm 41.5 0.145
612243 C19 29mm-1.1/8 43.0 0.159 613525 D19 28mm 43.0 0.167
612251 C19 30mm-1.3/16 43.0 0.175 613533 D19 29mm 43.0 0.170
612278 C19 32mm-1.1/4 43.0 0.189 613541 D19 30mm 43.0 0.190
613576 D19 32mm 43.0 0.219
612308 C19 7/16AF 38.0 0.056 613584 D19 33mm 44.5 0.250
612324 C19 9/16AF 38.0 0.061
613568 D19 36mm 44.5 0.287
612375 C19 7/8AF 41.5 0.105
613606 D19 5/16AF 38.0 0.054
613614 D19 11/32AF 38.0 0.051
613622 D19 3/8AF 38.0 0.053
K19 1/2“ IMPACT SOCKETS 53 613630 D19 13/32AF 38.0 0.054
613649 D19 7/16AF 38.0 0.053
613657 D19 1/2AF 38.0 0.055
613665 D19 9/16AF 38.0 0.063
613673 D19 19/32AF 40.0 0.065
613681 D19 5/8AF 40.0 0.070
613703 D19 11/16AF 40.0 0.062
613711 D19 3/4AF 40.0 0.077
613738 D19 25/32AF 40.0 0.082
INK19 1/2“ IMPACT ALLEN KEY SOCKETS 53 613746 D19 13/16AF 41.5 0.098
613754 D19 7/8AF 41.5 0.100
613762 D19 15/16AF 41.5 0.120
613770 D19 1. AF 41.5 0.137
613789 D19 1.1/16AF 41.5 0.145
613797 D19 1.1/8AF 43.0 0.167
613800 D19 1.3/16AF 43.0 0.190
613819 D19 1.1/4AF 43.0 0.203
36
T
19L (MM) / (AF) T D19L (MM) T
SOCKETS 1/2" SOCKETS 1/2"

hexagon, long pattern bi-hexagon UD profile, long pattern
› 1/2” square drive. › 1/2” square drive.
› Chrome plated and polished. › Chrome plated and polished.
614017 19L 13mm 77 0.102 015705 D19L 10mm 82 0.095
614025 19L 14mm 77 0.109 015706 D19L 12mm 82 0.120
614033 19L 17mm 77 0.134 015701 D19L 13mm 82 0.100
614041 19L 19mm 82 0.171 015702 D19L 14mm 82 0.130
614068 19L 21mm 82 0.205 015707 D19L 15mm 82 0.130
614076 19L 24mm 82 0.250 015712 D19L 16mm 82 0.140
015703 D19L 17mm 82 0.150
614130 19L 1/2AF 77 0.96 015708 D19L 18mm 82 0.180
614149 19L 9/16AF 77 0.110 015704 D19L 19mm 82 0.190
614157 19L 5/8AF 77 0.130 015709 D19L 21mm 82 0.210
614165 19L 11/16AF 77 0.143 015713 D19L 22mm 82 0.210
614173 19L 3/4AF 82 0.173 015710 D19L 24mm 82 0.260
614181 19L 13/16AF 82 0.210 015711 D19L 27mm 82 0.310
614203 19L 7/8AF 82 0.213 015714 D19L 30mm 82 0.300
614211 19L 15/16AF 82 0.233 015715 D19L 32mm 82 0.400
T
IN 19 (MM) / (AF)
ALLEN KEY SOCKETS 1/2"
for hexagon screws

› For hexagon head screws.
› 1/2” square drive.
› Bits: Chrome Vanadium steel 59CrV4.
› Sockets: Chrome Vanadium steel 31CrV3.
615315 IN19 5mm 60 0.050 615471 IN19 3/16AF 60 0.050
615323 IN19 6mm 60 0.055 615498 IN19 7/32AF 60 0.053
615331 IN19 7mm 60 0.058 615501 IN19 1/4AF 60 0.055
615358 IN19 8mm 60 0.060 615528 IN19 9/32AF 60 0.055
615366 IN19 9mm 60 0.063 615536 IN19 5/16AF 60 0.060
615374 IN19 10mm 60 0.065 615544 IN19 3/8AF 60 0.065
615382 IN19 12mm 60 0.075 615552 IN19 1/2AF 60 0.080
615390 IN19 14mm 60 0.085 615560 IN19 9/16AF 60 0.085
615404 IN19 17mm 60 0.115 615579 IN19 5/8AF 60 0.115
615412 IN19 19mm 60 0.120
37
SOCKETS
T
INR 19 L T IN 19 L T
SCREWDRIVER BIT SOCKETS ALLEN KEY SOCKETS 1/2"
1/2" for hexagon screws, long pattern
for multi-spline screws RIBE®, long pattern
› Manually operated sockets with knurled base. › Manually operated sockets with knurled base.
› For hexagon head screws. › For hexagon head screws.
› Bits: Chrome Vanadium steel 59CrV4. › Bits: Chrome Vanadium steel 59CrV4.
› Sockets: Chrome Vanadium steel – 31CrV3. › Sockets: Chrome Vanadium steel 31CrV3.
RIBE® = Registered trademark of Richard Bergner, GmbH & Co. KG, Schwabach, Germany.
1449826 INR 19L 5-100 100 0.085 6162060 IN19L 5-90 90 0.091
1449850 INR 19L 6-100 100 0.085 615730 IN19L 6-100 100 0.079
1449877 INR 19L 8-100 100 0.085 6157570 IN19L 7-100 100 0.089
1449591 INR 19L 10-100 100 0.105 615773 IN19L 8-100 100 0.097
1398636 INR 19L 12-100 100 0.145 615811 IN19L 10-100 100 0.124
1449893 INR 19L 14-100 100 0.155 615846 IN19L 12-100 100 0.151
615862 IN19L 14-100 100 0.202
616265 IN19L 1/4-100 100 0.081
616303 IN19L 5/16-100 100 0.097
616346 IN19L 3/8-100 100 0.119
616370 IN19L 1/2-100 100 0.161
616397 IN19L 9/16-100 100 0.207
INX 19-INX 19L T ITX 19 T

SCREWDRIVER BIT SOCKETS TORX® BIT SOCKETS 1/2"
1/2" male TORX®
for multi-point screws XZN

› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3.
› Chrome Vanadium steel 31CrV3. › 1/2” square drive.
› 1/2” square drive. › Manually operated sockets with knurled base.
› Bits: Molybdenum tool steel. › Bits: Molybdenum tool steel.
Code ! + y 0 Code ! + y 0
615889 INX19 5mm M5 55 0.068 024710 ITX19 T 20 T20 M4-M5 3.86 55 0.068
615900 INX19 6mm M6 55 0.076 024720 ITX19 T 25 T25 M4,5-M5 4.43 55 0.070
615927 INX19 8mm M8 55 0.077 024730 ITX19 T 27 T27 M4.5-M6 4.99 55 0.070
615943 INX19 10mm M10 55 0.094 024740 ITX19 T 30 T30 M6-M7 5.52 55 0.070
615978 INX19 12mm M12 55 0.110 024750 ITX19 T 40 T40 M7-M8 6.65 55 0.075
615919 INX19L 6-100 M6 100 0.093 024760 ITX19 T 45 T45 M8-M10 7.82 55 0.070
615935 INX19L 8-100 M8 100 0.097 024770 ITX19 T 50 T50 M10 8.83 55 0.075
615951 INX19L 10-100 M10 100 0.124 024780 ITX19 T 55 T55 M12 11.22 55 0.100
615986 INX19L 12-100 M12 100 0.149 024790 ITX19 T 60 T60 M14 13.25 55 0.110
1888951 INX19L 14-100 M14 100 0.110
38
T
ITX 19 L T IKS 19 T
TORX® BIT SOCKETS 1/2" SCREWDRIVER BIT SOCKETS
male TORX®, long pattern 1/2"
for cross-head screws PH
› Manually operated sockets with knurled base. › Manually operated sockets with knurled base.
› Chrome Vanadium steel 31CrV3. › Sockets: Chrome Vanadium steel 31CrV3.
› Bits: Molybdenum tool steel. › Bits: Molybdenum tool steel. ®
› Socket with Phillips & POZZIDRIV Bits
Code ! 9 + & y 0 Code ! y 0

024210 ITX19L T20 T20 M4-M5 3.86 100 0.095 665665 IKS19 NO. 2 60 0.075
024215 ITX19L T25 T25 M4.5-M5 4.43 100 0.095 665673 IKS19 NO. 3 60 0.080
024220 ITX19L T27 T27 M4.5-M6 4.99 100 0.096
024225 ITX19L T30 T30 M6-M7 5.52 100 0.096 665711 IKS19 PZD 2 60 0.070
024230 ITX19L T40 T40 M7-M8 6.65 100 0.096 665738 IKS19 PZD 3 60 0.080
024235 ITX19L T45 T45 M8-M10 7.82 100 0.098
024240 ITX19L T50 T50 M10 8.83 100 0.124
024245 ITX19L T55 T55 M12 11.22 100 0.151
024250 ITX19L T60 T60 M14 13.25 100 0.197
024253 ITX19L T70 T70 M16 15.55 100 0.277
ITX 19 B T TX 19 T
TORX® BIT SOCKETS 1/2" TORX® SOCKETS 1/2"
male TORX® head screws with pilot female TORX®
› Manually operated sockets with knurled base. › Manually operated sockets with thin walls and knurled base.
› Bits: Molybdenum tool steel. › 1/2” square drive.
› 1/2” square drive. › Chrome plated.
› Tamper proof.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
*WHILE STOCKS LAST
Code ! 8 + y 0 Code NO. 9 + y 0

6192720 ITX19B T20* T20 M4-M5 3.86 55 0.075 665908 TX19 E 10 E10 M8 9.42 38.0 0.055
6195660 ITX19B T25* T25 M4,5-M5 4.43 55 0.075 665916 TX19 E 11 E11 - 10.08 38.0 0.055
6196390 ITX19B T27* T27 M4,5-M6 4.99 55 0.076 665924 TX19 E 12 E12 M10 11.17 38.0 0.055
6200170 ITX19B T30 T30 M6-M7 5.52 55 0.076 665932 TX19 E 14 E14 M12 12.90 38.0 0.055
6200410 ITX19B T40 T40 M7-M8 6.65 55 0.091 665940 TX19 E 16 E16 M12 14.76 38.0 0.060
665959 TX19 E 18 E18 M14 16.70 40.0 0.080
665967 TX19 E 20 E20 M6 18.45 40.0 0.085
665975 TX19 E 24 E24 M18-M20 22.16 41.5 0.115
39
SOCKETS
T
Accessories (1/2")
1985
SPEED BRACE HANDLE 1/2"
Code No. a„ a y 0
614335 1985 1/2 12.5 420 0.585
1996 - 1997
SWIVEL HANDLES 1/2"
1996
› Non-slip 2-component handle.
1997
Code No. a„ a y 0
614483 1996 1/2 12.5 255 0.414
614491 1997/375 1/2 12.5 375 0.576
614556 1997/450 1/2 12.5 450 0.677
1930 1932
REDUCER 1/2" TO 3/8" CONVERTER 1/2" TO 3/4"
› For manually operated sockets and accessories with 1/2” square drive. › For manually operated sockets and accessories with 1/2” square drive.
1/2“ 3/8“ 1/2“ 3/4“

12,5 mm 10 mm 12,5 mm 20 mm
„ „ „ „
Code No. Q Q a a y 0 Code No. a a Q Q y 0
6143000 1930 1/2 12,5 3/8 10 39 0.062 614319 1932 3/4 20 1/2 12.5 45 0.124
40
T
1990 1990-75
EXTENSION BARS 1/2"

› For manually operated sockets and accessories 1990-125
1990-175 1990-250
Code No. a„ a y 0
614378 1990/75 1/2 12.5 75 0.109
614386 1990/125 1/2 12.5 125 0.177
614289 1990/175 1/2 12.5 175 0.239
614394 1990/250 1/2 12.5 250 0.337
1995 1990 M
UNIVERSAL JOINT 1/2" EXTENSION 1/2"
with magnet
› In accordance with SANS 1113 and DIN 3123. › For manually operated sockets and accessories with 1/2” square drive and ball locking device.
› Strong magnet securely fixes even large screws in the socket.
› Makes work easier particularly in confined spaces.
› One-hand operation.
› Hot forged.
*WHILE STOCKS LAST

„ „ „
Code No. a a Q Q y 0 Code No. a a y 0
614475 1995 1/2 12.5 1/2 12.5 70 0.149 2697920 1990M * 1/2 12.5 83 0.110
1987 1994
SLIDING T-BAR 1/2" COUPLERS 1/2"
*WITH MUSHROOM HEAD
„ „
Code No. a a y 0 Code No. a a y 0
614343 1987 1/2 12.5 290 0.350 6144670 1994 Coupler 1/2 12.5 37 0.042
614467 1994 PZK* 1/2 12.5 46 0.056
41
SOCKETS
(3/4") Square Drive

U
Sets (3/4")
e
32 EMAZ/ EMZ / EAZ !
SOCKET SETS 3/4"

› Supplied in blue powder coated D32 E steel box.

626538 C32 EMAZ ! 3293 Z-94 C32 27-1.1/16 29-1.1/8 32-1.1/4 + 3287 11.430
33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 3290-200
46-1.13/16 50-2. 1.3/8 3290-400
628026 D32 EMZ ! 3293 Z-94 D32 22 24 27 30 32 36 38 41 + 3287 11.060

46 50 3290-200
3290-400
628050 D32 EAZ ! 3293 Z-94 D32 7/8 15/16 1.1/16 1.1/4 1.5/16 + 3287 11.220
1.3/8 1.7/16 1.5/8 1.13/16 2. 3290-200
3290-400
32 EMAU-2 / EMU-2 e
!
SOCKET SETS 3/4"

› Supplied in blue powder coated D32 E steel box.
*WHILE STOCKS LAST

626546 C32 EMAU-2 " 3293 U-2 C32 27-1.1/16 29-1.1/8 32-1.1/4 + 3287 11.600
33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 3290-200
46-1.13/16 50-2. 1.3/8 3290-400
628042 D32 EMU-2 " 3293 U-2 D32 22 24 27 30 32 36 38 41 + 3287 11.230

46 50 3290-200
3290-400
628069 D32 EAU-2 * " 3293 U-2 D32 7/8 15/16 1.1/16 1.1/4 1.5/16 + 3287 11.400
1.3/8 1.7/16 1.5/8 1.13/16 2. 3290-200
3290-400
42
U
NEW
D32 NZU-Z
SOCKET SET 3/4"
› Sturdy carrying handles.
Code Reversible Ratchet Sockets Accessories 0

628073 " 3293 U-2 D32 22 24 27 29 30 32 36 38 41 46 50mm 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 + 3287 14.100
1.7/16 1.5/8 1.13/16 2 3290-200
3290-400
Ratchets (3/4")
3293 U-1
REVERSIBLE RATCHETS WITH LEVER CONTROL 3/4"
› With lever control and detachable handle.
Code No. a„ a A° y 0
627798 3293 U-1 3/4 20 11,25 500 2.590
627984 3293 U-1/440 3/4 20 11,25 440 2.380
3293 Z-94 3293 U-2

RATCHET HANDLE WITH REVERSIBLE RATCHET 3/4"
COUPLER 3/4"

627895 3293 Z-94 3/4 20 10 500 1.300 627860 3293 U-2 3/4 20 7,2 500 1.470
43
SOCKETS
U
3293/500 DJ/DJ 24X34
DOUBLE JOHNNY RATCHETS 3/4"
› For manually operated sockets and accessories with 3/4” square drive. 3293/500
› 500 DJ with double 3/4” drive coupler and 500mm detachable handle.
› 500 DJ24x30 with 24mm and 30mm fixed sockets and 500mm detachable handle.
3293/500-24x30
627127 3293/500 3/4 20 15 625 3.080
627194 3293/500 24x30 3/4 20 15 650 2.940
Sockets (3/4")
C 32 (MM) / (AF) U D 32 (MM) / (AF) U

SOCKETS 3/4" SOCKETS 3/4“
C profile bi-hexagon UD profile
› Chrome plated. › Chrome plated.
626007 C32 19mm-3/4 51.5 0.208 627216 D32 19mm 51.5 0.208
626015 C32 22mm-7/8 51.5 0.211 627224 D32 22mm 51.5 0.211
626023 C32 24mm-15/16 51.5 0.221 627232 D32 24mm 51.5 0.221
626058 C32 26 mm-1. 51.5 0.220 627240 D32 27mm 54.5 0.243
626066 C32 27mm-1.1/16 54.5 0.243 627259 D32 29mm 54.5 0.261
626074 C32 29mm-1.1/8 54.5 0.261 627267 D32 30mm 57.5 0.303
626082 C32 30mm-1.3/16 57.5 0.303 627275 D32 32mm 57.5 0.343
626090 C32 32mm-1.1/4 57.5 0.343 627704 D32 33mm 57.5 0.350
626104 C32 33mm-1.5/16 57.5 0.350 627763 D32 34mm 57.5 0.380
626112 C32 34mm 57.5 0.380 627283 D32 36mm 59.5 0.413
626171 C32 36mm-1.7/16 59.5 0.413 627291 D32 38mm 59.5 0.439
626201 C32 38mm-1.1/2 59.5 0.440 627305 D32 41mm 62.5 0.551
626228 C32 41mm-1.5/8 62.5 0.550 627313 D32 46mm 65.5 0.690
626244 C32 46mm-1.13/16 65.5 0.690 627321 D32 50mm 68.5 0.780
626260 C32 50mm-2. 68.5 0.840
627402 D32 7/8AF 51.5 0.212
626279 C32 1.3/8AF 59.5 0.402 627410 D32 15/16AF 51.5 0.222
627429 D32 1. AF 51.5 0.220
627437 D32 1.1/16AF 54.5 0.250
627445 D32 1.1/8AF 54.5 0.240
K32 3/4“ IMPACT SOCKETS 55 627399 D32 1.3/16AF 58.0 0.306
627453 D32 1.1/4AF 57.5 0.331
627461 D32 1.5/16AF 57.5 0.370
627488 D32 1.3/8AF 59.5 0.402
627496 D32 1.7/16AF 59.5 0.440
627518 D32 1.1/2AF 59.5 0.435
627526 D32 1.5/8AF 62.5 0.551
627534 D32 1.11/16AF 62.5 0.600
627542 D32 1.3/4AF 65.5 0.550
627550 D32 1.13/16AF 65.5 0.690
627569 D32 1.7/8AF 65.5 0.765
627577 D32 2.AF 68.5 0.840
44
U
IN 32 U
SCREWDRIVER BIT SOCKETS 3/4" IN32 14mm
for hexagon head screws
› Manually operated sockets with knurled base. IN32 22mm

› 3/4” square drive.
› Sockets: Chrome Vanadium steel 31CrV3.
› Bits: Chrome Vanadium steel 59CrV4.
Code No. $ y 0 Code No. $ y 0

6275850 IN32 14mm 14 80 0.352 6276070 IN32 19mm 19 80 0.433
6275930 IN32 17mm 17 80 0.394 6276150 IN32 22mm 22 80 0.482
Accessories (3/4")
3296
SWIVEL HANDLE 3/4"
Code No. a„ a y 0
627925 3296 3/4 20 547 1.900
3287
SLIDING T BARS 3/4"
Code No. a„ a y 0
627836 3287 3/4 20 500 0.118
627941 3287/447 3/4 20 447 0.107
3290
EXTENSIONS 3/4" 3290-200
Code No. a„ a y 0
627844 3290/200 3/4 20 200 0.555
627852 3290/400 3/4 20 400 1.058
45
SOCKETS
U
3219 3221
REDUCER 3/4" TO 1/2" CONVERTER 3/4" TO 1"
3/4“ 1/2“ 3/4“ 1“

20 mm 12,5 mm 20 mm 25 mm
„ „ „ „
Code No. a a Q Q y 0 Code No. a a Q Q y 0
017100 3219 1/2 12,5 3/4 20 56 0.160 627828 3221 1 25 3/4 20 60 0.338
3295 3294
UNIVERSAL JOINT 3/4" COUPLER 3/4"
„ „ „
Code No. a a Q Q y 0 Code No. a a y 0
017170 3295 3/4 20 3/4 20 105 0.580 627909 3294 3/4 20 52 0.133
SPARES
32 REPAIR KITS 19 BOXES & INSERTS
› For the 3293 range of ratchets and 3296 power bar. › Blue powder coated steel case.
Code No. Code No.

541036 3293 U-I Repair Kit 514683 D32 E Box
545716 3293 U-2 Repair Kit 544256 D32 Insert
545724 3293 Z Repair Kit 545228 C32 EMAZ Insert
627135 3293 DJ Repair Kit
545740 3296 Repair Kit
46
(1") Square Drive
V
Sets (1")
D 21 EMU-10 f
!
SOCKET SET 1"
15 pieces
› Manually operated 1” sockets and accessories.
› Gedore Vanadium steel 31CrV3.
› With reversible lever change ratchet.
› Supplied in blue powder coated steel case.
› Dimensions: 760 x 160 x 105mm.
018250 D 21 EMU JG $ 2193 U-3 3 D 21 36 41 46 50 2190 -16 Extension 27.600
55 60 65 70 75 80 2190 -8 Extension
+ 2187 Sliding T-Bar
2193 U-3
REVERSIBLE RATCHET 1"
› With non-slip metal disc change, fine-toothed
(72 teeth) and robust.
› Return angle 5 degrees.
› Push-fit tube handle.
with 1” square drive.
018240 2193 U-3 1 25 5 720 4.500
2193 Z-94
RATCHET HANDLE WITH COUPLER 1"
› With non-slip metal disc change, fine-toothed
(72 teeth) and robust.
› Return angle of nine degrees.
› Push-fit tube handle.
with 1” square drive.
6181520 2193 Z-94 1 25 9 720 4.200
47
SOCKETS
V
Sockets (1")
D 21/21 (MM) V
SOCKETS 1"
C profile

› 1” square drive.
› Gedore Vanadium steel 31CrV3.
› Chrome plated.
70-80mm
36-65mm
018001 D21 36mm 70 0.600 018006 D21 60mm 80 1.200
018002 D21 41mm 70 0.700 018011 D21 65mm 84 1.670
018003 D21 46mm 75 0.900 018008 21 70mm - Hexagon 70 0.600
018004 D21 50mm 75 1.000 018009 21 75mm - Hexagon 70 0.700
018005 D21 55mm 75 1.100 018010 21 80mm - Hexagon 75 0.900
Accessories (1")
2187
SLIDING T-BAR 1"
› For manually operated sockets and accessories with 1” square drive.
„
Code No. a a y 0
018210 2187 1 25 640 3.100
1“ IMPACT ACCESSORIES 58 1“ IMPACT SOCKET SET 57
48
V
2190
EXTENSIONS 1"

› Chrome Vanadium steel 31CrV3. 2190-8
2190-16
Code No. a„ a y 0
018220 2190-8“ 1 25 200 1.100
018230 2190-16“ 1 25 400 1.900
2132
REDUCER 1" TO 3/4"
1“ 3/4“
25 mm 20 mm
„ „
018200 2132 3/4 25 1 20 75 0.500
2194 2195
COUPLER 1" UNIVERSAL JOINT 1"
› For manually operated sockets and accessories with 1” square drive. › For manually operated sockets and accessories with 1” square drive.
„ „ „
Code No. a a y 0 Code No. a a Q Q y 0
6180710 2194 1 25 68 0.321 6180980 2195 1 25 1 25 140 1.480
49
IMPACT
SOCKETS
50 - 59
50
IMPACT SOCKETS, SETS
ACCESSORIES
(1/2”) SOCKETS (1/2”) SETS (1/2”) ACCESSORIES

53 52 53
(3/4”) SOCKETS (3/4”) ACCESSORIES (1”) SOCKETS

55 56 57
(1”) ACCESSORIES (1.1/2”) SOCKETS (1.1/2”) ACCESSORIES

58 59 59
IMPACT TOOLS
Impact Tools
T
(1/2") square drive
NEW NEW
K19-14 K19-17
IMPACT SOCKET SET 1/2" IMPACT SOCKET SET 1/2"
› 14 impact sockets, suitable for all standard electric and air tools. › 1/2“ square drive.
› 1/2” square drive. › Machine-operated, suitable for all standard electric and air tools
› Supplied in blue powder coated steel box. › In accordance with DIN 3129.
› GEDORE special steel, manganese phosphated.
Code No. Sockets 0 Code No. Sockets Extension 0

1646928 K19-14 1 K19 10 11 12 13 14 16 17 18 19 21 22 23 24 27 1646930 K19-17 1 K19 10 11 12 KB1990-125
13 14 16 17 18 19 KB1970/75 8-14mm safety ring & pin
21 22 23 24 27 KB1970/75 15-32mm safety ring & pin
K 19-5 T K 1900 R
IMPACT SOCKET SET 1/2" IMPACT DRIVER SETS 1/2" T
› 5 impact sockets, machine-operated, suitable for all standard electric and air tools. › For use on screws and bolts with slotted, cross-slotted or hexagon heads.
› 1/2” square drive. › Supplied in blue sheetmetal case with black plastic insert.
› Supplied in blue powder coated D19 steel box. › Dimensions: 281x79x42mm.

Code No. Sockets Extension 0 Code No. Sockets Accessories 0
1646923 K19-5 1 K19 10 13 14 17 24 KB1990-125 0.95 025490 K1900-613 4 6 7 8 K1900 1.22
1 2 3
2,5 3 4 5
025491 K1900-813 7 8 9 12 K1900 1.22
2 3 4
5 6 8 10
52
T
K 19 (MM) T K 19 L T
IMPACT SOCKETS 1/2" IMPACT SOCKETS 1/2"
hexagon hexagon, long pattern
› 1/2“ square drive. › 1/2“ square drive.

› Machine-operated, suitable for all standard electric and air tools › Machine-operated, suitable for all standard electric and air tools.
› In accordance with DIN 3129. › In accordance with DIN 3129.
› GEDORE special steel, manganese phosphated. › GEDORE special steel, manganese phosphated.
Code ! Recommended Accessories y 0 Code ! Recommended Accessories y 0

6160280 K19 10mm KB1970 10-14, KB1975 10-14 38 0.082 6163380 K19L 10mm KB1970 10-14, KB1975 10-14 77 0.140
6182880 K19 29mm KB1970 15-27, KB1975 15-27 50 0.188
1560557 K19 30mm KB1970 15-27, KB1975 15-27 50 0.256
1783742 K19 32mm KB1970 15-27, KB1975 15-27 50 0.286
IN K 19 KB 1932
IMPACT ALLEN KEY SOCKETS CONVERTER 1/2" TO 3/4"
1/2" for impact sockets
for in-hex screws
› 1/2“ square drive. › With square drive as per DIN 3121.

› Machine-operated, suitable for all standard electric and air tools.
1/2“ 3/4“
12,5 mm 20 mm
Code ! Recommended Accessories y 0
6224190 IN K19 8mm KB1970 10-14, KB1975 10-14 44 0.093
6224270 IN K19 10mm KB1970 10-14, KB1975 10-14 44 0.104
6224350 IN K19 12mm KB1970 15-27, KB1975 15-27 50 0.130
6225320 IN K19 14mm KB1970 15-27, KB1975 15-27 50 0.148
„ „
6225670 IN K19 17mm KB1970 15-27, KB1975 15-27 50 0.189 Code No. a a Q Q y 0
6225675 IN K19 19mm KB1970 15-27, KB1975 15-27 50 0.214 6650020 KB1932 3/4 20 1/2 12.5 48 0.159
53
IMPACT TOOLS
T
KB 1990 KB 1995
EXTENSIONS 1/2" UNIVERSAL JOINT 1/2"
for impact sockets for impact sockets
› For impact sockets and accessories with 1/2” square drive. › For air tool operated impact sockets and accessories with 1/2” square drive.
Code No. „ „
a„ a y 0 Code No. a a Q Q y 0
6655100 KB1990/75 1/2 12.5 75 0.143 6655410 KB1995 1/2 12.5 1/2 12.5 62 0.202
6655250 KB1990/125 1/2 12.5 125 0.226
KB 1900 KB 1970 - KB 1975

IMPACT DRIVER 1/2" SAFETY RING AND PIN
for impact sockets 1/2"
› For impact sockets and accessories with 1/2” square drive.
Code No. y 0 Code No. 0

024010 KB1900 123 0.580 6654790 KB1970/75 8-14mm 2
6654870 KB1970/75 15-32mm 2
(3/4") square drive
NEW
K32-18
IMPACT SOCKET SET 3/4"
› 3/4“ square drive.
Code No. Sockets Extension 0

6289995 K32-18 1 K32 17 18 19 KB3270/75 17-50mm safety ring & pin
29 30 32 33 34 36
38 40 41
54
U
K 32 (MM) U
IMPACT SOCKETS 3/4"
hexagon
› 3/4“ square drive.


6282040 K32 17mm KB3270, KB3275 45 0.330 6281580 K32 34mm KB3270, KB3275 55 0.475
6289990 K32 18mm KB3270, KB3275 45 0.330 6282710 K32 36mm KB3270, KB3275 56 0.482
6282120 K32 19mm KB3270, KB3275 45 0.331 6281740 K32 38mm KB3270, KB3275 59 0.517
6282190 K32 21mm KB3270, KB3275 46 0.340 6282970 K32 40mm KB3270, KB3275 59 0.560
6282200 K32 22mm KB3270, KB3275 46 0.333 6282980 K32 41mm KB3270, KB3275 59 0.561
6282210 K32 23mm KB3270, KB3275 46 0.360 6282982 K32 42mm KB3270, KB3275 58 0.582
6282390 K32 24mm KB3270, KB3275 46 0.349 6282984 K32 44mm KB3270, KB3275 62 0.697
6282470 K32 27mm KB3270, KB3275 48 0.367 6282986 K32 46mm KB3270, KB3275 62 0.703
6282474 K32 28mm KB3270, KB3275 48 0.379 6282988 K32 47mm KB3270, KB3275 68 0.810
6282476 K32 29mm KB3270, KB3275 48 0.384 6282990 K32 48mm KB3270, KB3275 68 0.827
6282550 K32 30mm KB3270, KB3275 52 0.395 6282992 K32 50mm KB3270, KB3275 68 0.831
6282630 K32 32mm KB3270, KB3275 52 0.445 6282994 K32 55mm KB3270, KB3275 72 1.149
6283010 K32 33mm KB3270, KB3275 55 0.475 6282996 K32 60mm KB3270, KB3275 75 1.500
6282998 K32 65mm KB3270, KB3275 78 1.800
K 32 L INK32
IMPACT SOCKETS 3/4" IMPACT ALLEN KEY SOCKETS
hexagon, long pattern 3/4"
for in-hex screws
› 3/4” square drive. › Machine-operated, suitable for all standard electric and air tools.
› With square drive as per DIN 3129. › With square drive as per DIN 3121.

6283600 K32L 17mm KB3270, KB3275 90 0.490
6283790 K32L 19mm KB3270, KB3275 90 0.510
6283870 K32L 22mm KB3270, KB3275 90 0.560
6283950 K32L 24mm KB3270, KB3275 90 0.580
6284090 K32L 27mm KB3270, KB3275 90 0.630
6284170 K32L 30mm KB3270, KB3275 90 0.700
6284250 K32L 32mm KB3270, KB3275 90 0.740
6286540 K32L 33mm KB3270, KB3275 90 0.770
6281660 K32L 34mm KB3270, KB3275 90 0.800
6284330 K32L 36mm KB3270, KB3275 90 0.850 1956477 INK32 14mm KB3270, KB3275 59 0.408
1956515 INK32 24mm KB3270, KB3275 67 0.555
55
IMPACT TOOLS
U
KB 3221 KB 3219
CONVERTER 3/4" TO 1" REDUCER 3/4" TO 1/2"
› With square drive as per DIN 3121. › With square drive as per DIN 3121.
› GEDORE special steel, manganese-phosphated.
3/4“ 1/2“
20 mm 12,5 mm
„ „
6675280 KB3219 1/2“ 12,5 3/4 20 65 0.351
3/4“ 1“
20 mm 25 mm
KB 3295
Code No. a
„
a Q
„
Q y 0 UNIVERSAL JOINT 3/4"
6671530 KB3221 1 25 3/4 20 65 0.445
for impact sockets

KB 3290
EXTENSIONS 3/4"
for impact sockets

„ „
6676090 KB3295 3/4“ 20 3/4 20 94 0.623
KB 3270 - KB 3275
SAFETY RING AND PIN
for impact sockets 3/4"
KB 3290-175 KB 3290-250 KB 3290-300
Code No. a„ a y 0
Code No. 0
6675550 KB3290/175 3/4 20 175 0.887
6675650 KB3290/250 3/4 20 250 0.917 6675441 KB3270/75 17-50mm 0.02
6675790 KB3290/12“ 3/4 20 300 1.300 6675444 KB3270/75 52-60mm 0.02
56
V
(1") square drive
NEW
K21-21
IMPACT SOCKET SET 1"
› 1“ square drive.
* Picture for illustration purposes only.

Code No. Sockets Extension 0
Contents/accessories may differ.
6186259 K21-21 1 K21 27 29 30 KB2190-175
32 33 34 36 38 41 KB2190-250
K 21 (MM) V K 21 L V
IMPACT SOCKETS 1" IMPACT SOCKETS 1"

hexagon hexagon, long pattern
› 1“ square drive. › 1“ square drive.

› In accordance with DIN 3129. › In accordance with DIN 3121.

6183060 K21 22mm KB 2170, KB 2175 55 0.546 6185350 K2L 22mm KB 2170, KB 2175 100 0.934
6183220 K21 27mm KB 2170, KB 2175 55 0. 593 6185510 K2L 27mm KB 2170, KB 2175 100 1.007
6184110 K21 55mm KB 2170, KB 2175 76 1.533
6184380 K21 60mm KB 2170, KB 2175 82 1.821
6184460 K21 65mm KB 2170, KB 2175 85 2.040
6184540 K21 70mm KB 2170, KB 2175 88 2.479
6184620 K21 75mm KB 2170, KB 2175 92 3.022
6184700 K21 80mm KB 2170, KB 2175 97 2.890
6184710 K21 85mm KB 2170, KB 2175 106 3.852
6184720 K21 90mm KB 2170, KB 2175 108 3.730
6184725 K21 95mm KB 2170, KB 2175 108 4.830
6184730 K21 100mm KB 2170, KB 2175 115 5.625
6184735 K21 105mm KB 2170, KB 2175 120 6.620
57
IMPACT TOOLS
V
INK21 KB 2132
IMPACT ALLEN KEY SOCKETS 1" REDUCER 1" TO 3/4"
for in-hex screws for impact sockets
› For all standard electric and air tools. › With square drive as per DIN 3121.
› With square drive as per DIN 3121.
Code ! Recommended Accessories y 0 „ „

1956548 INK21 17mm KB 2170, KB 2175 75 0.800 6657460 KB2132 3/4“ 20 1 25 77 0.661
1956558 INK21 19mm KB 2170, KB 2175 75 0.825
1956566 INK21 22mm KB 2170, KB 2175 75 0.845
1956574 INK21 24mm KB 2170, KB 2175 75 0.888
1956582 INK21 27mm KB 2170, KB 2175 75 0.938
KB 2137 KB 2170 - KB 2175

CONVERTER 1" TO 1.1/2" SAFETY RING AND PIN
for impact sockets for impact sockets 1"
„ „ Code No. 0
Code No. a a Q Q y 0 Price
6657890 KB2137 1.1/2“ 40 1 25 85 0.988 101.70 6657621 KB2170/75 19-70mm 0.02
6657623 KB2170/75 71-90mm 0.02
KB 2190 KB 2195
EXTENSIONS 1" UNIVERSAL JOINT 1"
› For impact sockets and accessories with 1” square drive. › For impact sockets and accessories with 1” square drive.
Code No. a„ a y 0
6657969 KB2190/175 1 25 200 1.57 „ „
6657975 KB2190/250 1 25 300 1.75 Code No. a a Q Q y 0
6658000 KB2190/330 1 25 400 2.35 6658350 KB2195 1“ 25 1 25 136 1.42
58
W
(1.1/2") square drive
K 37 KB 3790
IMPACT SOCKETS 1.1/2" EXTENSIONS 1.1/2“
hexagon for impact sockets
› 1.1/2” square drive. › For impact sockets and accessories with 1.1/2” square drive.
Code !. Recommended Accessories y 0

6328130 K37 46mm KB 3770, KB 3775 80 2.260
6328210 K37 50mm KB 3770, KB 3775 82 2.386
6328220 K37 52mm KB 3770, KB 3775 85 2.420
6328230 K37 54mm KB 3770, KB 3775 85 2.450
6328480 K37 55mm KB 3770, KB 3775 89 2.500
6328560 K37 60mm KB 3770, KB 3775 92 2.731
6328640 K37 65mm KB 3770, KB 3775 96 2.901
6328720 K37 70mm KB 3770, KB 3775 101 3.466
6328800 K37 75mm KB 3770, KB 3775 105 3.713
6328990 K37 80mm KB 3770, KB 3775 110 4.252
6329020 K37 85mm KB 3770, KB 3775 116 5.332 KB 3290-175 KB 3290-250 KB 3290-330
6329100 K37 90mm KB 3770, KB 3775 118 5.658
6329290 K37 95mm KB 3770, KB 3775 118 6.372
Code No. a„ a y 0
6329370 K37 100mm KB 3770, KB 3775 125 6.543
6329450 K37 105mm KB 3770, KB 3775 125 7.537 6329885 KB3790/175 1.1/2 40 175 4.08
6329530 K37 110mm KB 3770, KB 3775 137 7.959 6329888 KB3790/250 1.1/2 40 250 5.20
6329610 K37 115mm KB 3770, KB 3775 137 8.833 6329890 KB3790/330 1.1/2 40 330 6.38
KB 3721 KB 3770 - KB 3775

REDUCER 1.1/2" TO 1" SAFETY RING AND PIN
for impact sockets for impact sockets 1.1/2"
„ „
Code No. a a Q Q y 0 Code No. 0
6676410 KB3721 1 25 1.1/2 40 95 2.58 6676762 KB3770/75 46-90mm 0.02
6676764 KB3770/75 95-115mm 0.02
59
SCREWDRIVERS
60 - 71
SCREWDRIVERS
2150 3C SCREWDRIVERS 2160PH 3C SCREWDRIVERS SCREWDRIVER SETS

63 63 65
NUT DRIVERS NUT DRIVER SETS ALLEN KEYS

67 67 68
ALLEN KEY SETS TORX® KEYS SCREWDRIVER BITS

68 70 71
SCREWDRIVER
3C SCREWDRIVER
PERFECT POWER TRANSMISSION
powerful - unerring - absolute precision - wear-resistant
... perfect power transmission included Head marking for specifically and rapidly
That is what the new series Power-Grip3 Head marking
accessing the for specifi
right cally and
screwdriver
That is what screwdrivers from3GEDORE
the new series Power-Grip are…
screwdrivers from GEDORE are rapidly accessing the right screwdriver
… the reliable all-rounders for all work in wood, plastic and metal
reliable all-rounders for
all work on all materials.
Useful hanging hole
Useful hanging hole.
T Ergonomic grip design for optimum power
transfergrip design for optimum power transfer.
Ergonomic
Seized screws are loosened by gently knocking T Maximum force involving minimum effort
Maximum force involving minimum effort.
on the striking Seized screws areblade
cap. Full-length loosened by
transfers T Extensive contact surface with the hand
gently knocking on the striking
the full 100 % impact force onto the blade tip.
Extensive contact surface with the hand.
T Ergonomically appropriately placed hard and
cap. Full-length blade transfers Ergonomically

soft elements give hard
placed anditssoftGEDORE
the grip elements give the
typical
the full 100% impact force onto gripkind-to-hands
its kind-to-handsfeel feeling.
T Suitable for small hands, large hands and for
the blade tip. Suitable for all size hands, both right and left-handers.
both right and left-handers
Blade injected as a positive fit into the plastic

Soft fast turning zone with hard core and matt chrome-plated
T Soft fast turning zone with hard power point
power
- gets the power point
there gets the power there
quickly
quickly. Power
T Power point also ensures that point
thealso ensures
forefinger The hard core is inside the grip. It takes up the force
thatthetheblade
reliably guides forefinger reliably The hard core is inside the grip.and
It takes
from the external components easilyuptransfers
the
guides the blade. force from the external components and easily
it to the shaft. The hard core can be seen at the head
transfers it to the shaft. The hard core can be seen
marking.
at the head marking
The torque required by the German

Standards Institute (DIN/ISO) is Blade fully
fully tempered
tempered for
for aa long
long service
service life.
life
exceeded considerably Blade
The ideal all-rounder for screws in Blade from
from Gedore
GEDOREVanadium
molybdenum-vanadium-Plus
wood, plastic and metal
Made Molybdenum plus
tempered steel for hardness, elasticity and resistance
tempered steel for hardness, elasticity and resistance
to wear
to wear.
GEDORE has two different blade types
for slotted head screws:
POWER-GRIP 3
Workshop tip = wedge-shaped blade in acc.
with DIN ISO 2380-1 Form-A
Workshop tip for all types of bolting

work.
Screwdriver tip is wedge-shaped
Little parallel surface of nominal
thickness DIN ISO 2380-1 Form-A
Precision-made blade tip ensures optimum power
Form A
transfer onto the screw head.

Electrician tip = slender, parallel blade in acc.
with DIN ISO 2380-1 Form-B
Electrician tip specially for screws Precision-made blade tip ensures optimum
deep down in the screw shaft e.g. power transfer onto the screw head
with wire connectors and sockets.
Extensive parallel surface of nominal
thickness, no wedge-shape
62 DIN ISO 2380-1 Form-B
Form B
Form A
3C-Screwdrivers
2150
3C SCREWDRIVERS
for slotted-head screws, special lengths
› According to DIN ISO 2380-2.

› Blade tip according to DIN ISO 2380-1 Form A.
› 3-component handles.
› Power-Grip3 with hanging hole.
› Ergonomic handle design enables precise and fatigue-free working.
› Positive-fit joint of handle and blade for optimum transmission of force.
› Type of drive marked at end of the handle.
› Blade from Gedore Molybdenum-Vanadium-plus tempered steel.
Code No. M ?K L N Ø 0 Code No. M ?K L N Ø 0

6679270 2150 3 80 3.0 0.5 165 3.0 0.039 2822709 2150-2.5-75 75 2.5 0.4 160 2.5 0.055
6679350 2150 4 100 4.0 0.8 185 4.0 0.061 6680280 2150 3-150 150 3.0 0.5 235 3.0 0.044
6679430 2150 5.5 100 5.5 1.0 200 5.0 0.093 6680360 2150 4-150 150 4.0 0.8 235 4.0 0.069
6679510 2150 6.5 150 6.5 1.2 260 6.0 0.128 6680520 2150 5.5-150 150 5.5 1.0 250 5.5 0.104
6679780 2150 8 150 8.0 1.2 270 7.0 0.170 6680870 2150 6.5-200 200 6.5 1.2 310 6.0 0.152
6679860 2150 10 200 10.0 1.6 320 8.0 0.203
2160 PH 2160 PZ
3C SCREWDRIVERS 3C SCREWDRIVERS
for cross-head screws PH for cross-head screws Pozi PZ
› According to DIN ISO 8764. › Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PZ.
› Tip according to DIN ISO 8764-1 PH. › 3-component handles.
› 3-component handles. › Power-Grip3 with hanging hole.
› Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working.
› Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force.
› Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle.
› Type of drive marked at end of the handle. › Size 3 blade with hexagon bolster.
› Size 3 blade with hexagon bolster. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
› Blade from Gedore Molybdenum-Vanadium-plus tempered steel.
Code No. + N ; PH 0 Code No. + N < PZ 0

6683110 2160 PH 0 M1,6-M2 145 0 0.032 6683970 2160 PZ 0 M1,6-M2 145 0 0.038
6683380 2160 PH 1 M2-M3 200 1 0.080 6684000 2160 PZ 1 M2-M3 180 1 0.080
6683460 2160 PH 2 M3,5-M5 210 2 0.119 6684190 2160 PZ 2 M3,5-M5 210 2 0.119
6683540 2160 PH 3 M5,5-M7 270 3 0.192 6684270 2160 PZ 3 M5,5-M7 270 3 0.189
63
SCREWDRIVER
2153 2161 PH
3C SCREWDRIVER 3C SCREWDRIVER
for slotted-head screws, stubby for cross-head screws PH, stubby
› Acc. to DIN ISO 2380-2A, blade tip acc. to DIN ISO 2380-1 Form B. › Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PH.
› For confined spaces. › For confined spaces.
› 3-component handles. › 3-component handles.
› Power-Grip3 with hanging hole. › Power-Grip3 with hanging hole.
› Ergonomic handle design enables precise and fatigue-free working. › Ergonomic handle design enables precise and fatigue-free working.
› Positive-fit joint of handle and blade for optimum transmission of force. › Positive-fit joint of handle and blade for optimum transmission of force.
› Type of drive marked at end of the handle. › Type of drive marked at end of the handle.
› Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
Code No. ?K L N 0 Code No. + N 0

1482432 2153-5.5 5.5 1.0 81 0.036 1531204 2161 PH 2 M3,5 - M5 81 0.036
2163 TX
3C SCREWDRIVERS
for recessed TORX® head screws
› Type of drive marked at end of the handle.
› Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
› TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.
Code No. 7 + & N 0 Code No. 7 + & N 0

6685400 2163 TX T6 T6 M2 1,69 145 0.029 6686050 2163 TX T20 T20 M4 - M5 3,86 185 0.060
6685590 2163 TX T7 T7 M2,5 1,99 145 0.038 6686130 2163 TX T25 T25 M4,5 - M5 4,43 200 0.082
6685670 2163 TX T8 T8 M2,5 2,31 145 0.038 6686210 2163 TX T27 T27 M4,5 - M6 4,99 215 0.098
6685750 2163 TX T9 T9 M3 2,50 145 0.038 6686480 2163 TX T30 T30 M6 - M7 5,52 225 0.123
6685830 2163 TX T10 T10 M3 - M3,5 2,74 165 0.039 6686560 2163 TX T40 T40 M7 - M8 6,65 240 0.144
6685910 2163 TX T15 T15 M3,5 - M4 3,27 165 0.054 6686640 2163 TX T45 T45 M8 - M10 7,82 250 0.176
Me Ele POZ
cha ctrici Phi IDR TOR
nic an’s llip IV ® X®
’s s
64
3C-Screwdriver Sets
2150-2160 PH-06 MS 2150-2160 PH-06 ELS

3C SCREWDRIVER SET 3C SCREWDRIVER SET
6 pieces 6 pieces
› Practical set composition in environmentally-friendly cardboard box. › Practical set composition in environmentally-friendly cardboard box.
› For slotted and cross-head screws PH. › For slotted and cross-head screws PH.
› 3-component handles. › 3-component handles.
› Power-Grip3 with hanging hole. › Power-Grip3 with hanging hole.
› Ergonomic handle design enables precise and fatigue-free working. › Ergonomic handle design enables precise and fatigue-free working.
› Positive-fit joint of handle and blade for optimum transmission of force. › Positive-fit joint of handle and blade for optimum transmission of force.
› Type of drive marked at end of the handle. › Type of drive marked at end of the handle.
› Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
Code No. Contents 0 Code No. Contents 0

1482319 2150-2160 PH-06 MS ? 2150 4 5.5 6.5 8 0.660 1482320 2150-2160 PH-06 ELS ? 2150 6.5 3-150 4-150 6.5-200 0.660
; 2160 PH1 PH2 ; 2160 PH1 PH2
NEW
2163 TX DT 2142-008
3C TORX® SCREWDRIVER SET HEXAGON ALLEN KEY SET
10 pieces 8 pieces
› Practical set composition in environmentally-friendly cardboard box. › With 2 hexagons, same size each end.
› For recessed TORX® head screws. › 2C-T handle.
› 3-component handles. › Soft component made from thermoplastic elastomer.
› Power-Grip3 with hanging hole. › Hard component made from fibre glass reinforced plastic.
› Ergonomic handle design enables precise and fatigue-free working. › With hanging hole.
› Positive-fit joint of handle and blade for optimum transmission of force. › GEDORE vanadium steel 61CrSiV5.
› Type of drive marked at end of the handle. › Positive-fit joint of handle and blade for optimum transmission of force.
› Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.
› TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.

1482335 2163TX 7 2163 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 0.740 3037371 DT2142 k 2142 2 2,5 3 4 5 6 8 10 0.970
65
SCREWDRIVER
Electronic Screwdrivers
165-171-06 165 TX-06

ELECTRONIC SCREWDRIVER ELECTRONIC SCREWDRIVER
SET SET
6 pieces 6 pieces
› For slotted head and cross-slotted head screws PH. › For recessed TORX® head screws.
› Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated. › Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated.
› Tip additionally coated for highest precision and corrosion protection. › Tip additionally coated for highest precision and corrosion protection.
› 2-component handle in ergonomic design. › 2-component handle in ergonomic design.
› Pivoting end cap with micro anti-slip surface. › Pivoting end cap with micro anti-slip surface.
› Colour coding of the drive type. › Colour coding of the drive type.
› In plastic case. › In plastic case.
› With Gedore Check-Tool-System: 2-colour foam insert to check that the set is complete › With GEDORE Check-Tool-System: 2-colour foam insert to check that the set is complete.

1902849 165-171-06 * ; 165 PH 000 00 0 0.385 1902857 165-TX-06 * 7 165 TX T5 T6 T7 T8 T9 T10 0.415
? 171 IS 1,2 1,8 2,5
4611
POWER TESTING SCREWDRIVER
› For 6-24 Volt with clamp cable.
Code No. 0
6698650 4611 115
66
Nut Drivers
2133
NUT DRIVERS WITH 3C HANDLE
› Acc. to DIN 3125, ISO 2725-1.
› Head depth 25 mm, blade length 125mm.
› 10 mm and larger with hexagon bolster.
› Blade from GEDORE Molybdenum-Vanadium-Plus steel.
Code No. $ Ø ! N 0
1746731 2133 5,5mm - 5 5.5 225 0.107
1746758 2133 6mm - 5 6.0 225 0.109
1746766 2133 7mm - 6 7.0 235 0.135
1746855 2133 8mm - 6 8.0 235 0.152
1746863 2133 9mm - 6 9.0 235 0.168
1746898 2133 10mm 10 6 10.0 245 0.198
1746901 2133 11mm 13 8 11.0 245 0.202
1746928 2133 12mm 13 8 12.0 245 0.221
1746944 2133 13mm 13 8 13.0 245 0.225
2133
NUT DRIVER SETS
for hexagon nuts
› Made up of most popular sizes.
Code No. Contents 0

1746947 2133-06S 2133 5,5 6,0 7,0 8,0 9,0 10,0 0.648
1746946 2133-06L 2133 8,0 9,0 10,0 11,0 12,0 13,0 0.937
1746948 2133-09 2133 5,5 6,0 7,0 8,0 9,0 10,0 11,00 12,00 13,00 1.300
55 SPARK PLUG SPANNER 94 VDE NUT DRIVERS 1 36
67
SCREWDRIVER
Allen Keys
42 (MM) / (AF)
HEXAGON ALLEN KEYS
for hexagon screws
› For hexagon socket head bolts.
› Gunmetal finish.
› Short series.
*WHILE STOCKS LAST
Code No. y 0 Code No. y 0
6342200 42 0,7mm 32 0.001 6341900 42 24mm 224 1.250
6342390 42 0,9mm 34 0.001 6342550 42 27mm 244 1.760
6342470 42 1,3mm 40 0.001 6342040 42 1/16 AF 45 0.001
6340260 42 1,5mm 45 0.002 6342041 42 5/64 AF 50 0.002
6340340 42 2mm 50 0.002 6344330 42 3/32 AF 53 0.003
6340420 42 2,5mm 56 0.003 6344410 42 1/8 AF 59 0.005
6340500 42 3mm 63 0.004 6344411 42 9/64 AF 62 0.007
6340690 42 4mm 70 0.010 6344680 42 5/32 AF 65 0.009
6340770 42 5mm 80 0.018 6344760 42 3/16 AF 72 0.015
6340850 42 6mm 90 0.030 6344840 42 7/32 AF 78 0.020
6340930 42 7mm 95 0.042 6344920 42 1/4 AF 84 0.030
6341070 42 8mm 100 0.060 6345060 42 5/16 AF 97 0.055
6341150 42 9mm 106 0.080 6345140 42 3/8 AF 110 0.090
6341230 42 10mm 112 0.100 6345141 42 7/16 AF 114 0.140
6341231 42 11mm 117 0.130 6345220 42 1/2 AF 122 0.190
6341310 42 12mm 125 0.160 6345300 42 9/16 AF 136 0.270
6341580 42 14mm 140 0.260 6345490 42 5/8 AF 146 0.360
6341581 42 16mm 150 0.320 6345491 42 11/16 AF * 156 0.420
6341660 42 17mm 160 0.440 6345570 42 3/4 AF 175 0.600
6341740 42 19mm 180 0.620 6345571 42 7/8 AF 195 0.900
6341820 42 22mm 200 0.950 6345572 42 1 AF 218 1.400
42 / 42L (MM) / (AF) 42-88M
HEXAGON ALLEN KEY SETS

42L-9M
› Made up of most popular sizes.
Code ! Contents 0
6347510 42-7M 2 2,5 3 4 5 6 8 0.200
6349050 42-8M 3 4 5 6 8 10 12 14 0.700
6349051 42-88M 2 2,5 3 4 5 6 8 10 0.300
6349052 42-100M 2 2,5 3 4 5 6 7 8 9 10 0.400
012112 42-22M 0,7 0,9 1,3 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14 16 17 19 22 24 6.200
6349053 42-88P 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8” 0.200
6348910 42-9P 1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 0.300
6351974 42L-7M 2 2,5 3 4 5 6 8 0.200
6351975 42L-9M 1,5 2 2,5 3 4 5 6 8 10 0.400
6351976 42L-14M* 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14 2.200
68
42L (MM) / (AF) 42KL (MM) / (AF)
HEXAGON ALLEN KEYS HEXAGON ALLEN KEY SETS
for in-hex screws for in-hex screws
› For hexagon socket head bolts. › Hexagon socket key with ball end and holder.
› Gunmetal finish. › Gunmetal finish.
› Long pattern for use in hard to access areas.
› Cranked shaft, resulting in a lever effect during tightening or loosening operation.
*WHILE STOCKS LAST

Code No. y 0
6350809 42L-1,5 90 0.002
6350810 42L-2 100 0.003
6351030 42L-2,5 112 0.005
6351110 42L-3 125 0.008
6351380 42L-4 142 0.020
6351460 42L-5 163 0.030
6351540 42L-6 184 0.050
2977486 42L-7 194 0.070 Code ! Contents 0
6351620 42L-8 205 0.100
6351977 42KL-7M 1,5 2 2,5 3 4 5 6 0.250
6351621 42L-9 216 0.140
6351978 42KL-9M 1,5 2 2,5 3 4 5 6 8 10 0.395
6351700 42L-10 231 0.180
6351979 42KL-7P 3/64” 1/16” 5/64” 3/32” 1/8” 1/4” 5/32” 0.300
6351890 42L-11 244 0.240
6351891 42L-12 259 0.290
6351970 42L-14 290 0.445
6351971 42L-17 333 0.600
1543375
1543376
42L-1/16 *
42L-5/64 *
80
80
0.002
0.003
42T (MM) / (AF)
42L-3/32 *
1543377
1543318 42L-1/8 *
84
94
0.004
0.007 HEXAGON ALLEN KEYS
1543319 42L-9/64 * 102 0.010
1543326 42L-5/32 * 103,5 0.013 for in-hex screws
1543334 42L-3/16 * 111 0.030
1543342 42L-7/32 * 122,5 0.040
1543369 42L-1/4 * 130 0.045 › Chrome Vanadium steel 59CrV4.
1543350 42L-5/16 * 150 0.082 › Blackened finish and blue polypropylene handle.
1543385 42L-3/8 * 168 0.130 › T-shaped handle, making tightening or loosening operations easier for users.
1543386 42L-7/16 * 188 0.200
1543393 42L-1/2 * 206 0.290
1543407 42L-9/16 * 266 0.400
42SCL *WHILE STOCKS LAST
HEXAGON ALLEN KEY SETS Code

2647257
No.
42T-2
y
140
0
0.035
2647265 42T-2,5 152 0.040
2647273 42T-3 165 0.045
› Chrome Vanadium steel 59CrV4. 2647281 42T-4 182 0.055
› Blackened finish and blue 2647303 42T-5 200 0.070
polypropylene holder. 2647311 42T-6 220 0.090
› Easy to handle. 2681439 42T-7 230 0.130
› Indispensable pocket set for 2667846 42T-8 240 0.150
electricians. 2647338 42T-10 264 0.230
2647351 42T-5/64 * 140 0.035

2647352 42T-3/32 * 152 0.040
2647354 42T-1/8 * 166 0.050
2647361 42T-9/64 * 182 0.050
*WHILE STOCKS LAST 2647362 42T-5/32 * 182 0.050
2647370 42T-3/16 * 200 0.060
Code Contents 2647388 42T-7/32 * 220 0.080
! 0
2647389 42T-1/4 * 220 0.095
6351972 42SCL-6M 3 4 5 6 8 10 0.170 2647397 42T-5/16 * 240 0.150
6351973 42SCL-7M * 2 2,5 3 4 5 6 8 0.175 2647400 42T-3/8 * 264 0.220
69
SCREWDRIVER
42SCKL 43TX
HEXAGON ALLEN KEY SET CRANKED SOCKET KEY SETS
for in-hex screws for recessed TORX® screws
› Hexagon socket key with ball end and holder. › Chrome Vanadium steel 59CrV4.
› Chrome Vanadium steel 59CrV4. › Gunmetal finish.
› Gunmetal finish. › Supplied in plastic wallet.
*PACKAGING SUBJECT TO CHANGE WITHOUT NOTICE.

*WHILE STOCKS LAST
Code ! Contents 0 Code ! Contents 0
6351980 42SCKL 5M * 5 6 7 8 10 0.270 6360959 43TX-08 Plastic Holder T9 T10 T15 T20 T25 T27 T30 T40 0.090
6360961 43TX-15* T6 T7 T8 T9 T10 T15 T20 T25 T27
0.500
T30 T40 T45 T50 T55 T60
TORX® Keys
43TX 43 KTX
CRANKED SOCKET KEYS CRANKED SOCKET KEY SET
for recessed TORX® screws for recessed TORX® screws, with ball end
› Made from Chrome Vanadium steel 59CrV4. › Made from Chrome Vanadium steel 59CrV4.
› L-shaped. › L-shaped.
› Long pattern for use in hard to access areas. › Cranked shaft, resulting in a lever effect during tightening or loosening operation.
› Gunmetal finish. › Blackened finish.
TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
Code No. + & y 0 Code ! Contents 0

6363550 43 TX-T6 M2 1,67 42 0.004 6367897 43KTX-8M T9 T10 T15 T20 T25 T27 T30 T40 0.130
6363630 43 TX-T7 M2,5 1,99 48 0.005
6363710 43 TX-T8 M2,5 2,31 48 0.005
6363980 43 TX-T9 M3 2,50 48 0.005
6364010 43 TX-T10 M3-M3,5 2,74 51 0.008 2163 TX TORX® SCREWDRIVER SETS 65
6364280 43 TX-T15 M3,5-M4 3,27 54 0.008
6364360 43 TX-T20 M4-M5 3,86 57 0.011
6364440 43 TX-T25 M4,5-M5 4,43 60 0.014
6364520 43 TX-T27 M4,5-M5-M6 4,99 64 0.022
6364600 43 TX-T30 M6-M7 5,52 70 0.029
6364790 43 TX-T40 M7-M8 6,65 76 0.041
6364870 43 TX-T45 M8-M10 7,82 83 0.061
6364950 43 TX-T50 M10 8,83 95 0.087
6365090 43 TX-T55 M12 11,22 108 0.176
6365170 43 TX-T60 M14 13,25 120 0.180
70
43TXL 43TXL
CRANKED SOCKET KEYS CRANKED SOCKET KEY SETS
for recessed TORX® screws for recessed TORX® screws
› Made from Gedore Chrome Vanadium steel 59CrV4 › L-shaped.
› L-shaped. › Long pattern for use in hard to access areas.
› Long pattern for use in hard to access areas.
› Gun-metal finish.
*WHILE STOCKS LAST
Code ! Contents 0
6367895 43TXL 09 * T7 T8 T9 T10 T15 T20 T25 T30 T40 0.300
6367896 43TXL 15 * T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40
1.200
T45 T50 T55 T60
*WHILE STOCKS LAST

43TV
Code No. + & y 0
6367106 43 TXL-T6 * M2 1,67 90 0.007 TORX® GAUGE TESTER
6367107 43 TXL-T7 * M2,5 1,99 100 0.007
6367108 43 TXL-T8 * M2,5 2,31 110 0.007
6367109 43 TXL-T9 * M3 2,50 124 0.008 › Easy determination of internal or external TORX® sizes
6367110 43 TXL-T10 * M3-M3,5 2,74 138 0.010
6367380 43 TXL-T15 * M3,5-M4 3,27 158 0.020
6367460 43 TXL-T20 * M4-M5 3,86 178 0.020
6367540 43 TXL-T25 * M4,5-M5 4,43 190 0.030
6367620 43 TXL-T27 * M4,5-M5-M6 4,99 200 0.050
6367700 43 TXL-T30 * M6-M7 5,52 210 0.060
6367890 43 TXL-T40 * M7-M8 6,65 215 0.085
6367891 43 TXL-T45 * M8-M10 7,82 224 0.110
6367892 43 TXL-T50 * M10 8,83 232 0.185
6367893 43 TXL-T55 * M12 11,22 248 0.200 Code No. 0
6367894 43 TXL-T60 * M14 13,25 278 0.415 024700 43 TV 0.023
Screwdriver Bits
687 / 690
SCREWDRIVER BITS TORX®
› 687 For TORX® screws.

› 690 For Phillips and POZIDRIV® screws.
› Manufactured from high quality Molybdenum tool steel.
› Gun metal finish.
Code No. + & y 0
POZIDRIV®
654183 687 TX - T6 M2 1,67 25 0.005
654191 687 TX - T7 M2,5 1,99 25 0.005
654205 687 TX - T8 M2,5 2,31 25 0.005 TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.
654213 687 TX - T9 M3 2,50 25 0.005
654221 687 TX - T10 M3-M3,5 2,74 25 0.005 POZIDRIV® = Registered Trademark of GKN Fasteners.
654248 687 TX - T15 M3,5-M4 3,27 25 0.005
654256 687 TX - T20 M4-M5 3,86 25 0.005 Code No. y 0
654264 687 TX - T25 M4,5-M5 4,43 25 0.005 654124 690 PH 1 25 0.005
654272 687 TX - T27 M4,5-M5-M6 4,99 25 0.005 654132 690 PH 2 25 0.005
654280 687 TX - T30 M6-M7 5,52 25 0.005 655279 690 PZD - 1 25 0.005
654299 687 TX - T40 M7-M8 6,65 25 0.005 655287 690 PZD - 2 25 0.005
71
PLIERS
72 - 89
72
PLIERS
SETS
COMBINATION PLIERS FLAT / ROUND NOSE MECHANICS

74 76 77
CABLE STRIPPERS / CRIMPERS CIRCLIP PIPE WRENCHES

80 82 86
LOCKGRIP / UNIVERSAL CUTTERS TIN SNIPS / PIPE CUTTERS

87 88 89
PLIERS
Combination Pliers
8250 POWER COMBINATION PLIERS

› According to DIN ISO 5746. › To cut all wire types including piano wire, 1.6 mm.
› For heavy continuous use. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.
› Good lever action for easy cutting. › JC = chrome plated, with 2-component handles.
› For flat and round material. › TL = steel-grey, with blue dipped non-slip handles.
Gripping surface with file-cut

› Identifies the GEDORE Power Pliers range, for a particularly effective
offering increased cutting and gripping force
with up to 35% less effort. grip.
Roughly toothed gripping surfaces for

Inductively hardened cutting edges securely holding screws, pipes etc.
(62 - 64 HRC) ensure constant cutting
power over a long time period.
Maximum cutting performance for
minimal effort expended thanks to
High-grade 2-component handles an optimum interaction of cutting
with finger protection enable work to geometry, eccentric rivet bearing
be done ergonomically and without and ergonomic handle design.
fatigue.
8250 R
POWER COMBINATION PLIERS
Code No. y
6707070 8250 - 180 JC 180 240
6707310 8250 - 200 JC 200 320
8250-225 TL R 8260 R
POWER COMBINATION PLIERS FENCING PLIERS
› For heavy, continuous use. › For heavy duty, continuous use.
› Good lever action for easy cutting. › CrV material.
› Induction hardened precision cutting edge. › Hardened and tempered.
› Hardness approximately 63HRC. › Cutting edges induction hardened.
› To cut all wire types, including piano wire.
› DIN ISO 5756.
Code No. y Code No. y

6708040 8250 - 225 TL 225 400 670250 8260 - 250 250 570
670300 8260 - 300 310 930
74
Side Cutters / Pincers
8316 POWER SIDE CUTTER

› According to DIN ISO 5749. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.
› Good lever action for easy cutting. › JC = chrome plated, with 2-component handles.
› For hard wire/piano wire. › TL = steel-grey, with blue dipped non-slip handles.
› Maximum cutting capacity Ø 1.4 - 2.0mm.
JC TL
Inductively hardened cutting

edges (63 - 65 HRC) ensure
constant cutting power over a
long period.
Maximum cutting performancefor

minimal effort expended due to
an optimum interaction of cutting
geometry, eccentric rivet bearing and
ergonomic handle design.
8316 P
POWER SIDE CUTTERS
Code No. Ø y
6711930 8316 - 140TL 1,4 140 132
6744190 8316 - 140 JC 1,4 140 152
6744510 8316 - 160 JC 1,6 160 210
6745080 8316 - 200 JC 2,0 200 305
8380 P 8381 Q
TOWER PINCERS PINCERS
› Heavy-duty wire braid and mesh-cutting pincers. › Standard heavy-duty pincers.
› Accoding to DIN ISO 9242, Form A. › Accodingto DIN ISO 9243, Form A.
› Induction hardened precision cutting edges, hardness 61-63 HRC. › Induction hardened precision cutting edges, hardness 61-63 HRC.
› For medium-hard wire, 1.6 mm. › Heads ground, steel-grey, with blue dipped non-slip handles (TL).
› Heads ground, steel-grey, with blue dipped non-slip handles (TL).
› Geometrically optimised head and handle areas for ergonomic use.
*WHILE STOCKS LAST

6752020 8380 - 225 TL 225 315 6752370 8381 - 160 TL * 160 225
6752100 8380 - 250 TL 250 400 6751990 8381 - 200 TL * 200 410
6752450 8381 - 225 TL * 224 450
75
PLIERS
8132 T
Flat Nose / Round Nose Pliers
TELEPHONE PLIERS
with cutting edge, serrated, straight pattern
8112 S
› Accoding to DIN ISO 5745.
ROUND NOSE PLIERS › Long, flat-round jaws, straight gripping faces, serrated.
› For holding, gripping, bending and cutting. JC
› Induction hardened precision cutting edges,
serrated hardness 61-63 HRC.
› Gedore special hardened and tempered steel, drop-
forged, oil-hardened and annealed.
› Similar to DIN ISO 5745.
› Short jaws, serrated gripping faces. › JC = chrome plated, with
2-component handles. TL
› For gripping and bending.
› Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › TL = steel-grey, with blue dipped
non-slip handles.
› JC = chrome-plated, with 2-component handles.
› TL = steel-grey, with blue dipped non-slip handles.
Code No. y
6710610 8132 - 140 TL 140 103
6718860 8132 - 140 JC 140 118
6719240 8132 - 160 JC 160 140
6719670 8132 - 200 JC 200 200
JC
8132 AB T
TL
BENT NOSE TELEPHONE PLIERS
*WHILE STOCKS LAST with cutting edge, serrated, angled pattern
› Similar to DIN ISO 5745.
Code No. y › Long, flat-round jaws, angled gripping surfaces,
6713200 8112 - 140 TL * 140 92 serrated. JC
6713390 8112 - 140 JC 140 117 › 45 ° angled tips make gripping
round the corner possible.
› Induction hardened precision cutting edges,
hardness 61-63 HRC.
› Gedore special hardened and TL
tempered steel, drop-forged, oil-hardened and
8120 R annealed.
› JC = chrome plated, with 2-component handles.
FLAT NOSE PLIERS › TL = steel-grey, with blue dipped non-slip handles.
Code No. y
without cutting edge, serrated gripping faces 6711180 8132 - AB - 160 TL 160 120
› Accoding to DIN ISO 5745. 6720920 8132 - AB - 160 JC 160 140
› Long jaws, serrated gripping faces. 6711260 8132 - AB - 200 TL 200 175
› For holding and bending. 6721300 8132 - AB - 200 JC 200 200
› Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.
› JC = chrome plated, with 2-component handles.
› TL = steel-grey, with blue dipped non-slip handles. 8135 T
TELEPHONE PLIERS
without cutting edge, serrated, straight pattern
JC
› Accoding to DIN ISO 5745, straight pattern.
› Flat-round tapered jaws, cross-hatched
gripping surfaces and fine-tipped nose.
› Gedore special hardened and tempered
steel, drop-forged, oil-hardened and
annealed.
TL › Steel-grey, with blue
dipped non-slip handles.

6710370 8120 - 160 TL 160 121 6722460 8135 - 140 TL 140 95
6715170 8120 - 160JC 160 140
76
8133 MULTIPLE PLIERS
› Multifunctional pliers for the mechanical and electronic fields. › JC = chrome plated, with 2-component handles.
› For holding, cutting, insulation-stripping, crimping, squeezing. › TL = steel-grey, with blue dipped non-slip handles.
› Flat-round jaws, straight gripping faces, serrated.
› For medium-hard wire, 1.6 mm.
› Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.
Gripping faces with file-

cut for safe holding.
Stripping of wire sizes
0.5/1.5/2.5mm2.
Cutting edge induction

TL hardened (62-64 HRC).
Crimping of conductor end-

sleeves 0.5-2.5mm2.
JC Squeezing of insulated flat
plugs 1.0-2.5mm2.
8133 T
MULTIPLE PLIERS
with cutting edge, serrated, straight pattern
Code No. y
6722110 8133 - 180 JC 160 120
Mechanic‚s Pliers
8136 T
MECHANIC‘S PLIERS
without wire cutter, straight pattern
› According to DIN ISO 5745. › JC = chrome-plated, with 2-component

› Flat-round tapered jaws, cross-hatched handles.
gripping surfaces. › TL = steel-grey, with blue dipped non-slip
› For holding, gripping and bending. handles.
› Fine-tipped nose, for safe work in confined
spaces.
› Gedore special hardened and tempered steel,
drop-forged, oil-hardened and annealed.
Code No. y
6722890 8136 - 200 TL 200 178
77
PLIERS
Pliers sets
› Produced in-house by GEDORE Austria. › Induction-rehardened cutting edges.
› Combination, flat-nosed, round-nosed and mechanic‘s pliers made from Gedore special hardened › Protective nickel and chrome plating.
and tempered steel. › Optimum transfer of force.
› Side cutters and end cutting nippers made from GEDORE high-performance hardened and tempered steel. › High cutting performance.
› Chrome-plated, 2-component handle protectors. › Fatigue-free, even with constant use.
› Hot-forged tempered steel. › Guaranteed GEDORE quality.
› Precision-machined, oil-hardened and annealed.
S 8003 JC S8303 JC
PLIERS SET PLIERS SET
3 pieces 3 pieces
› Practical set in environmentally friendly cardboard box.

› Practical set in environmentally friendly cardboard box.
Code No. Contents Code No. Contents
8132-200 JC Telephone Pliers 142 10 JC Universal Pliers

6701110 S 8003 JC 8250-200 JC Combination Pliers 1025 6703160 S 8303 JC 8250-180 JC Combination Pliers 1005
8316-200 JC Side Cutters 8316-160 JC Side Cutters
NEW
1102-003 S8393 JC
PLIERS SET PLIERS SET
3 pieces 3 pieces
› In Gedore L-BOXX® Mini, including divider set. › Practical set in environmentally friendly cardboard box.
8132-160 JC Telephone Pliers 142 10 TL Universal Pliers

1692305 1102-003 8250-180 JC Combination Pliers 940 3012859 S 8393 JC 8250-200 JC Combination Pliers 1005
8316-160 JC Side Cutters 8314-180 JC Side Cutters
78
Cable cutters
GEDORE BOLT CUTTERS

WIRE ROPE CUTTERS
› The cutting plates slide past each other dissecting the › Notch cut; the cutters press into the material and create a
material. notch. The material is compacted and thus separated.
› The wire rope is cleanly cut and retains its circular cross- › The wire rope is compressed and thus loses its circular cross-
section. It does not fan out. section at the cut. The wire rope fans out as a result.
Splicing: Fanning out:

› The old seafaring ability to separate the rope into its individual strands so as › Separation into individual strands is not wanted when cutting wire ropes. It is a very laborious
to then braid them into a loop or lengthen the rope with another rope without business to splice wire ropes. That is why more up-to-date ways are available to incorporate loops
knotting. in wire ropes. However, they require a smooth cut without any spliced strands.
8320 JL
WIRE ROPE CUTTERS
Execution: › Single- and multi-core copper and aluminium cables with maximum 6mmØ.
› Easy-to-change cutting plates. Joint:
› Cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process › Adjustable joint for precise cutting plate guidance.
(Metal Injection Moulding). › Latch to prevent unwanted opening.
› Extremely soft shearing cut reliably prevents the wire rope from fanning out. Handles:
Jaws/cutting edges: › With 2-component handles.
› Specially arched cutting edges. Material/finish:
› Easy to replace cutting plates if worn. › Plier body hot drop-forged.
› Hardness 62-65 HRC. › Chrome plated.
› Low force needed due to the optimum cutting-edge geometry.
› Two integrated press profiles for Bowden cable terminal sleeves and cable end sleeves.
Cutting performance:
› Wire ropes up to 1800N/mm2 with maximum 6mmØ. (e.g. stainless steel wire ropes, wire ropes with
steel and textile cores, Bowden cables, shears).
› Wire up to 750N/mm2 with maximum 4mmØ. (e.g. nails/wire nails, screws, bolts, ceiling banners).
Code No. y
2788799 8320 - 200 JL 200 480
Stripping Tools
8146
8146
STRIPPING PLIERS
with exchangeable module inserts, self-adjusting
› Self-adjusting cutting and stripping tool for modern electrical installations and equipment circuitry
(90% of all wires can be stripped without any adjustment of the tool).
› The use of easily exchangeable module inserts allows accurate stripping 8146-1 8146-2
of a wide range of insulation materials, including PVC and PTFE, with just one tool.
› Flat blade included in delivery.
Stripping capacity: Cutting values:

› 8146-1 with flat blade: 0.02-10mm2 / AWG 34-8 (for PVC insulation). › Flexible wires up to 10mm2 / AWG 8.
› 8146-2 with round blade: 4-16mm2 / AWG 10-5. › Rigid wires up to 1.5mm2 / AWG 16.
Code No. Description mm2 AWG
1830805 8146 Stripping pliers including module insert 8146-1 0,02-10 34-8 180
1830813 8146-1 Module insert with flat blade 0,02-10 34-8 15
1830821 8146-2 Module insert with round blade 4-16 12-6 16
79
PLIERS
8147 8148
HEAVY-DUTY CABLE PRECISION STRIPPING TOOL
STRIPPING TOOL for data cables
› Professional wire stripping tool with 2 cable hooks. › User-friendly, easy to handle, all-round cut.
› Compact and user-friendly, even in the most difficult conditions. › Precision adjustment of cutting depth (adjuster wheel with 9 positions).
› For cables (up to 40mmØ) with any kind of insulation. › Replaceable blade.
› Blade can be locked in one of three positions (circular, straight or spiral cuts). › Safe, rounded, pocket design.
› Cable capacity: 4.5 - 40mmØ. › Stripping capacity: 2.5 - 11mm.
› Insulation thickness: up to 4.5mm. › Insulation thickness: up to 1.0mm.
Dimensions:
Dimensions:
› with small cable hook: 150 x 42 x 30.5mm. › 90.5 x 39.5 x 19mm.
› with large cable hook: 167 x 52 x 30.5mm. › E-8148 = Spare blade.
› E-8147 = Spare blade.
Code No. Ø Code No. Ø

1830856 8147 * 4,5-40 196 1830864 8148 * 2,5-11 43
1884719 E-8147 Spare Blade * 2 1884727 E-8148 Spare Blade * 2
Crimp Plier modular
ADVANTAGES:
› Reliable: parallel action ensures precision crimping.
› Easy to handle: components kept visible throughout the crimping process, easily accessible release function allows
quick change of insert modules without the use of additional tools.
› Comfortable: lightweight, plastic-sheathed tool frame for comfort grip - even at low temperatures.
› Practical: insert modules, easy to change and clearly labelled, supplied in pairs on a pin in a storage box to prevent
loss (storage boxes interconnect - like a jigsaw puzzle).
› Versatile and economical: just one tool base frame can be used with all the various insert modules to carry out a
wide range of crimping processes, including heavy plug and socket connectors, coaxial connectors, optic fibres and
RJ45 plugs.
CHANGING OF THE CRIMPING INSERTS

› By pressing the release of the crimping insert you can easily remove the insert. › Remove the crimping insert and put in the required insert
while pressing down the release.
80
Crimp Plier Sets
S 8140 A S 8140 D
CRIMPING PLIERS SET CRIMPING PLIERS SET
AUTOMOTIVE DATA COM
4 pieces 4 pieces
› Practical set made up for specific requirements in › Practical set made up for specific requirements in data-
automotive engineering. communications installations.
› Ideal for high-standard crimping. › Ideal for high-standard crimping.
› Can be individually upgraded by purchasing › Can be individually upgraded by purchasing additional
additional module inserts. module inserts.
› Module inserts changeable without tools. › Module inserts changeable without tools.
› In practical blister packaging. › In practical blister packaging.
S 8140 A S 8140 D
8140-05 8140-09 8140-11 8140-14 8140-16 8140-17

1830910 S 8140 A * Cripmer 8140 Inserts 05 09 11 754 1830937 S 8140 D Cripmer 8140 Inserts 14 16 17 711
S 8140 E S 8140 J
CRIMPING PLIERS SET CRIMPING PLIERS SET
ELECTRONIC INDUSTRIAL
4 pieces 4 pieces
› Practical set made up for specific requirements for › Practical set made up for specific requirements in
electricians. industrial maintenance.
› Ideal for high-standard crimping. › Ideal for high-standard crimping.
› Can be individually upgraded by purchasing additional › Can be individually upgraded by purchasing additional
module inserts. module inserts.
› Module inserts changeable without tools. › Module inserts changeable without tools.
› In practical blister packaging. › In practical blister packaging.
S 8140 E S 8140 J
8140-01 8140-02 8140-05 8140-02 8140-06 8140-18
*WHILE STOCKS LAST

*WHILE STOCKS LAST
1830899 S 8140 E Cripmer 8140 Inserts 01 02 05 760 1830929 S 8140 J * Cripmer 8140 Inserts 02 06 18 752
81
PLIERS
Circlip pliers for external retaining rings (shafts)
B
8000 A 0 - A 4 - STRAIGHT BM 8000 A 01 - A 41 - BENT N
CIRCLIP PLIERS FOR EXTERNAL CIRCLIP PLIERS FOR
RETAINING RINGS EXTERNAL RETAINING RINGS
Form A Form B
› For retaining rings as per DIN 471, DIN 983. › Forged Gedore Chrome Vanadium special › For retaining rings as per DIN 471, DIN 983. › Forged Gedore Chrome Vanadium special
› DIN 5254 Form A. hardened and tempered steel. › DIN 5254 Form B. hardened and tempered steel.
› Straight tips. › Precision machined, oil hardened and › 90° angled tips. › Precision machined, oil hardened and
› With opening spring. annealed. › With opening spring. annealed.
› With clamping protection. › Black, with red dipped handles. › With clamping protection. › Black, with red dipped handles.
Code No. F E y Code No. F E y

6701380 8000 A 0 5/32-3/8 3-10 141 96 6702270 8000 A 01 5/32-3/8 3-10 130 97
6701460 8000 A 1 3/8-1 10-25 141 98 6702350 8000 A 11 3/8-1 10-25 130 97
6701540 8000 A 2 3/4-2.3/8 19-60 182 186 6702430 8000 A 21 3/4-2.3/8 19-60 170 182
6701620 8000 A 3 1.5/8-4 40-100 230 310 6702510 8000 A 31 1.5/8-4 40-100 210 317
6701700 8000 A 4 3.3/8-5.1/2 85-140 320 555 6702780 8000 A 41 3.3/8-5.1/2 85-140 305 563
B B
8000 A 5 - STRAIGHT M 8000 A 51 - BENT N
CIRCLIP PLIERS FOR CIRCLIP PLIERS FOR
EXTERNAL RETAINING RINGS EXTERNAL RETAINING RINGS
› Straight tips. › Non-crush type release lever with handle › 90° angled tips. › Reinforced safety arms.
› Black, tips and lock lever zinc plated. recesses, red dip insulated. › Tips and lock lever zinc plated. › Precision machined, oil hardened and
› The toothed bracket stops the plier legs from › Precision machined, oil hardened and › Lever handle end red dip insulated. annealed.
straddling beyond the permitted working area. annealed. › Finger protection. › E-8000 A = pair of spare tips.
› This ensures safe working even in concealed › E-8000 A = pair of spare tips.
fitting positions.
› Locking pin can be replaced.
Code No. F E y Code No. F E y

6701890 8000 A 5 4.13/16-11.7/8 122-300 550 1900 6702860 8000 A 51 4.13/16-11.7/8 122-300 560 1898
Code No. Code No.

5701840 E-8000 A 5 Spare Tips 72 5702810 E-8000 A 51 Spare Tips 112
82
Circlip pliers for internal retaining rings (bores)
8000 J 0 - J 4 - STRAIGHT A 8000 J 01 - J 41 - BENT A

M N
INTERNAL RETAINING RINGS INTERNAL RETAINING RINGS
Form C Form D
› For retaining rings as per DIN 472, DIN 984. › Precision machined, oil hardened and › For retaining rings as per DIN 472, DIN 984 › Precision machined, oil hardened and
› DIN 5256 Form C. annealed. › DIN 5256 Form D. annealed.
› Straight tips. › Black, with blue dipped handles. › 90° angled tips. › Black, with blue dipped handles.
› Forged Gedore Chrome Vanadium special › Forged Gedore Chrome Vanadium special
hardened and tempered steel. hardened and tempered steel.
Code No. D C y Code No. D C y

6703240 8000 J 0 3/8-9/16 8-13 141 0.080 6704130 8000 J 01 3/8-9/16 8-13 129 0.080
6703320 8000 J 1 3/8-1 12-25 141 0.081 6704210 8000 J 11 3/8-1 12-25 129 0.082
6703400 8000 J 2 3/4-2.3/8 19-60 183 0.164 6704480 8000 J 21 3/4-2.3/8 19-60 169 0.161
6703590 8000 J 3 1.5/8-4 40-100 230 0.281 6704560 8000 J 31 1.5/8-4 40-100 214 0.279
6703670 8000 J 4 3.3/8-5.1/2 85-140 322 0.472 6704640 8000 J 41 3.3/8-5.1/2 85-140 292 0.484
A A
8000 J 5 - STRAIGHT M 8000 J 51 - BENT N
INTERNAL RETAINING RINGS INTERNAL RETAINING RINGS
› Straight tips. › Locking pin can be replaced. › 90° angled tips. › Reinforced safety arms.
› Black, tips and lock lever zinc plated. › Non-crush type release lever with handle › Black, tips and lock lever zinc plated. › Precision machined, oil hardened and
› The toothed bracket stops the plier legs from recesses, blue dip insulated. › Lever handle end blue dip insulated. annealed.
straddling beyond the permitted working area. › Precision machined, oil hardened and › Finger protection. › E-8000 J = pair of spare tips.
› This ensures safe working even in concealed annealed.
fitting positions. › E-8000 J = pair of spare tips.
Code No. D C y Code No. D C y

6703750 8000 J 5 4.13/16-11.7/8 122-300 565 1836 6704720 8000 A 51 4.13/16-11.7/8 122-300 575 1898
Code No. Code No.

5703700 E-8000 J 5 Spare Tips 72 5704780 E-8000 J 51 Spare Tips 116
83
PLIERS
Circlip Pliers Assortment
S 8000 B 1101-001 B
SET OF CIRCLIP PLIERS A A
M SET OF CIRCLIP PLIERS M
4 pieces N N
8 pieces
› Most popular sizes, packed in environmentally friendly cardboard box. › Most popular sizes, packed in sturdy plastic case.
› Particularly suitable for barely accessible places. › Particularly suitable for barely accessible places.
› For internal and external circlip rings. › For internal and external circlip rings.
› With straight and 90° angled tips. › With straight and 90° angled tips.
› In Gedore i-BOXX® 72, with transparent cover for easy view.

External: 8000-A1 Straight 8000-A11 Angled
6701030 S 8000 External: 8000-A2 Straight 8000-A21 Angled 756 1692275 1101-001 1550
8000-A2 Straight 8000-A21 Angled
Internal: 8000-J2 Straight 8000-J21 Angled
Internal: 8000-J1 Straight 8000-J11 Angled
8000-J2 Straight 8000-J21 Angled
NEW NEW
S 8000 JE S 8000 AE
B A
CIRCLIP PLIERS FOR M CIRCLIP PLIERS FOR M
INTERNAL RETAINING RINGS N EXTERNAL RETAINING RINGS N

3041999 S8000 JE Internal: 8000-JE 1 Straight 8000-JE 2 Straight 756 3041980 S8000 AE External: 8000-AE 1 Straight 8000-AE 2 Straight 756
Internal: 8000-JE 11 Angled 8000-JE 21 Angled External: 8000-AE 11 Angled 8000-AE 21 Angled
84
Grip Wrenches
THE TOGGLE LEVER – A GIANT AMONG THE JOINTS

› Similar in construction to the human leg and consisting of hip, knee and ankle joints › Maximum pressing/clamping force with knee lever extended – even with automatic locking effect
› The knee joint's intelligent power management is its unbeatable advantage: i.e. self-clamping effect (e.g. with grip pliers) relieved by operating the releasing lever
› Clever utilization of the physical lever laws *) › Constant high quality of work
› Rapid and powerful even with a reduced operating force
› Ideal for optimum pressure and clamping operations
Self-clamping effect – can only be cancelled by operating the releasing lever!
134 137
STRAIGHT JAW GRIP WRENCH GRIP WRENCHES
› For secure clamping, gripping and holding. › For secure clamping, gripping and holding.
› Nickel plated. › Nickel plated.
› Jaws hardened to 50HRC. › Jaws hardened to 50HRC. Three-point shaped bottom jaw, upper jaw with wire groove.
› With adjusting screw and release lever with moulded plastic grip. › With adjusting screw and release lever with moulded plastic grip.
› Safe release. › Safe release.
Code No. O y Code No. O y

745995 134 / 250 25 230 570 640662 137 / 175 25 185 293
640670 137 / 250 32 230 546
138 138 Y
WELDER'S GRIP WRENCH PROFILE-SECTION GRIP WRENCH
› For clamping strips and profile sections when welding. › For clamping bulky profile and angle sections.
› Cast steel jaws. › Strong forged jaws.
› Nickel plated. › GEDORE special chrome-vanadium steel, nickel-plated.
› Release lever blue dip insulated. › Release lever blue dip insulated.
Code No. y Code No. O P y

6407350 138 280 960 6407860 138 Y 95 75 280 763
85
PLIERS
Pipe Wrenches
DID YOU KNOW? Permit No. 9668 / 15323
Gedore heavy duty pipe wrenches are the ONLY pipe wrenches in South Africa with the SABS certified mark.
225 227
PIPE WRENCHES PIPE WRENCHES
Stillson type American pattern
› Drop forged, CHROME VANADIUM handle, hardened and tempered. › For heavy duty applications.
› Drop forged hook, hardened and tempered from selected carbon steel. › Drop forged hook, hardened and tempered from selected carbon steel.
› Jaw teeth induction hardened. › Jaw teeth induction hardened.
› Blue epoxy powder coated. › Spheroidal graphite cast handle.
› In accordance with SANS 1028. › Blue epoxy powder coated.
› In accordance with SANS 1028.
Code No. O [ y Code No. O y

645036 225/250 34 1 250 580 645303 227/200 34 190 415
645044 225/300 44 1.1/4 300 770 645311 227/250 49 245 785
645052 225/350 49 1.1/2 350 1035 645344 227/300 55 300 1180
645060 225/450 60 2 450 1630 645346 227/350 60 320 1625
645079 225/600 76 2.1/2 600 3000 645354 227/450 76 410 2780
645087 225/900 102 3.1/2 920 6780 645362 227/600 90 550 4190
645370 227/900 140 800 9595
645374 227/1200 210 1040 14500
225 SPARES 227 SPARES

Code No. Code No.
544027 E 225 A / 250 Frame 545376 E 227 A / 200 Spring
545406 E 227 A / 450 Spring
544051 E 225 A / 450 Frame
545414 E 227 A / 600 Spring
544086 E 225 A / 900 Frame 545368 E 227 B / 200 Knurl
544825 E 225 B / 250 Knurl 545430 E 227 B / 250 Knurl
Composite
544833 E 225 B / 300 Knurl 545449 E 227 B / 350 Knurl
544841 E 225 B / 350 Knurl 545457 E 227 B / 450 Knurl
544868 E 225 B / 450 Knurl 545465 E 227 B / 600 Knurl
545597 E 227 B / 900 Knurl
544876 E 225 B / 600 Knurl
545473 E 227 C / 200 Jaw & Pin
544884 E 225 B / 900 Knurl 545481 E 227 C / 250 Jaw & Pin
544922 E 225 C / 250 Hook 545503 E 227 C / 350 Jaw & Pin
544930 E 225 C / 300 Hook 545511 E 227 C / 450 Jaw & Pin
544949 E 225 C / 350 Hook 545538 E 227 C / 600 Jaw & Pin
544957 E 225 C / 450 Hook 545635 E 227 C / 900 Jaw & Pin
544965 E 225 C / 600 Hook 545546 E 227 D / 200 Hook
545554 E 227 D / 250 Hook
544973 E 225 C / 900 Hook
545562 E 227 D / 350 Hook
545007 E 225 D / 250 Pin 545570 E 227 D / 450 Hook
545015 E 225 D / 300 Pin 545589 E 227 D / 600 Hook
545023 E 225 D / 350 Pin 545643 E 227 D / 900 Hook
545031 E 225 D / 450 Pin 545426 E 227 A / 1200
545058 E 225 D / 600 Pin 545469 E 227 B / 1200
545066 E 225 D / 900 Pin 545540 E 227 C / 1200
545592 E 227 D / 1200
545252 E 225 EF / 250 Rivet & Spring
545260 E 225 EF / 300 Rivet & Spring
545309 E 225 EF / 350 Rivet & Spring
545279 E 225 EF / 450 Rivet & Spring
545317 E 225 EF / 600 Rivet & Spring
545287 E 225 EF / 900 Rivet & Spring
86
210 E 210A
PIPE WRENCH SPARE CHAIN & JAWS (PAIR)
Chain pipe wrench
› Double sided replaceable serrated jaws.

› Selected carbon steel.
› Drop forged, heat treated.
› Red epoxy powder coated handle.
Code No. Chain Lengths

032099 E 210 A / 50 Chain 325mm
032100 E 210 A / 75 Chain 420mm
032101 E 210 A / 100 Chain 530mm
032102 E 210 A / 150 Chain 765mm
Code No. Pipe Size y 032104 E 210 A / 200 Chain 960mm
032000 210 / 50 10-60mm 510 1600 032049 E 210 B / 50 Pair of Jaws
032005 210 / 75 15-90mm 710 4400 032050 E 210 B / 75 Pair of Jaws
032010 210 / 100 27-115mm 950 8000 032051 E 210 B / 100 Pair of Jaws
032020 210 / 150 35-165mm 1140 11500 032052 E 210 B / 150 Pair of Jaws
032054 E 210 B / 200 Pair of Jaws
032040 210 / 200 45-220mm 1320 13000
Water Pump / Universal Pliers
142 143
UNIVERSAL PLIERS UNIVERSAL PLIERS
6 settings
› According to DIN ISO 8976 Form C. › Offset gripping faces for self-gripping – no
› With safety box joint and protection against slipping off. › According to DIN ISO 8976 Form B.
blocking. › Gedore special Chrome Vanadium steel. › Offset gripping faces for self-gripping of nuts and pipes.
› Fine adjustment. › Induction rehardened serrated faces. › Pinch protector.
› 142 10 = 15 settings. › Model C = slim handles with forged serrations. › For pipes up to 1.1/2"
and nuts up to 38mm.
› Single-hand adjustment for safe clamping. › Model JC = chrome-plated, with 2-component
› Slim pliers head for places that are hard to handles › Slim handles with
forged serrations
access. › Chrome Vanadium special steel.
› Long slim jaws.
Code No. O y
6410650 143 10 C 38 256 0.340
5410600 E 143 A/10 Spare Screw and Nut
142 10 JC
145
WATER PUMP PLIERS
142 10 TL
› 145 10C = 7 settings.

› 145 15C = 9 settings.
142 10 C
145 10 C
*WHILE STOCKS LAST

Code No. O y
6416260 142 10 C 38 250 0.380 Code No. O y
6416340 142 10 JC 38 260 0.417 6412000 145 10 C 39 250 0.365
6416180 142 10 TL 38 255 0.371 6412190 145 15 C * 50 375 0.854
5537190 E 142 A/10 Spare Screw and Nut 2962683 E 145 A/10 Spare Screw and Nut
87
PLIERS
Bolt Cutters
8340 / 8340 Z BOLT CUTTERS

› Compact power bolt cutters with effective cutting performance. › An effective force multiplication ratio of 1:30 near the cutting edge. 10 N
› Optimum lever action requires less effort. › Force optimised, cutting near joint is guaranteed.
› Wear-free rotating/thrust block bolt to reduce sliding friction when cutting.
300 N
30 : 1
10 N
8340 8340 Z
1.
2.
› From soft to hard wires up to 4mmØ. › With a two-cut process, from soft to hard wires 4 to 6mmØ.
› The grooves in the blades prevent sliding while cutting. › The extra cutting edge (1) serves as a first cut for thick bolts and engraves them.
› In the second step, the main cutting edge (2) cuts through the bolt completely.
8340 8340 Z
MINI BOLT CUTTERS MINI BOLT CUTTERS
› The positioning of the blades close to the joint › Precision cutting edges for soft wire up to › Optimum lever action requires less effort. › Precision blades that can cut soft wire up to
creates a particularly effective power to cutting 6.0mmØ, hard and piano wire up to 3.8mmØ. › Cutting edges additionally inductively hardened 6.0mmØ, hard wire up to 5,5mmØ and piano
ratio. › Model JL = steel-grey, with blue dipped handle (63 - 65HRC). wire up to 3,8mmØ.
› Blades additionally induction hardened protectors. › Double-sided milling near the joint ensures best › Model JL = steel-grey, with blue dipped handle
(63-65HRC). leverage for thicker wire diameters. protectors.
8340-200 JL
8340 Z-200 JL

2541300 8340 - 200JL 200 0.389 2666324 8340Z - 200JL 200 0.389
8178
BOLT CUTTERS
› Accoding to DIN ISO 5743.
› Double cam bolt adjustment.
› Cutting head replaceable.
› Cutters from Chrome Vanadium steel.
› Maximum cutting performance 48HRC.
Code No. max. E z y 0 Code No.

2675137 8178 - 460 5 18 460 1.680 2675196 E 8178 460 Replacement Cutting Head
88
Pipe Cutter
220
for steel pipes
› Heavy duty pipe cutters.

› Frame in malleable cast steel.
› TUBEX®
Code No. , Wall thickness y 0

4503400 220020 1/8-2” 10-60 2.0-6.3 380 2.90
Code No.
4503750 220220 Spare Wheel
Tin Snips
8516 8531
scissors pattern straight pattern
› American Pattern. › Cutting surfaces induction hardened. › English Pattern. › Cutting surfaces induction hardened.
› Carbon steel SAE1045. › Precision ground cutters. › Carbon steel SAE1045. › Precision ground cutters.
› Drop forged and heat treated. › Blue epoxy powder coated. › Drop forged and heat treated. › Blue epoxy powder coated.

675504 8516/250 250 0.525 675784 8531/200 Left-hand Cutting 200 0.290
675547 8516/300 300 0.675 675792 8531/250 Left-hand Cutting 250 0.455
675806 8531/300 Left-hand Cutting 300 0.660
424 425
ideal pattern snips figure snips
› For straight continuous and shape cutting. › Sheet thickness maximum 1.2mm at strength › For straight continuous and shape cutting. › Sheet thickness maximum 1.2mm at strength
› With lever action. of 600N/mm2. › With lever action. of 600N/mm2.
› Self-opening with installed spring and lock. › Non-slip two-component handles. › Self-opening with installed spring and lock. › Non-slip two-component handles.
› Polished cutting edges. › Polished cutting edges.

4515410 424-260 Right-hand Cutting * 160 530 4515760 425-260 Right-hand Cutting * 260 480
89
AUTOMOTIVE &
SPECIAL TOOLS
90 - 101
90
AUTOMOTIVE TOOLS
TYRE FITMENT TOOLS FILTER / SPARK PLUG TOOLS LIFTERS

92 93 94
PISTON / VALVE TOOLS SPECIAL PLIERS BRAKE TOOLS

95 95 96
MEASURING TOOLS SAWS TOOLKITS

97 98 100
AUTOMOTIVE TOOLS
Box Spanners Wheel Wrenches
26R 27
DOUBLE ENDED BOX SPANNERS WHEEL SOCKET WRENCH
› In tubular steel, hardened. › Chrome Vanadium steel 31CrV3.
› Chrome plated. › Chrome plated.
Code No. y Code No. y 0

6210050 26R 6x 7 105 28 026050 27-22x24 19 500 1700
6210210 26R 8x 9 110 35 026060 27-24x27 19 500 1800
6210640 26R 10x 11 120 45 026150 27-27x30 19 500 2300
6210990 26R 12x 13 140 75 026155 27-27x32 21 500 2300
6211370 26R 14x 15 140 90 026156 27-27x33 21 500 2300
6211610 26R 16x 17 150 120 026165 27-30x32 21 500 2300
6211880 26R 17x 19 160 180 026168 27-30x33 21 500 2300
6211960 26R 18x 19 160 180 026170 27-32x33 21 500 2400
6212260 26R 20x 22 170 210 026175 27-21x38 19 500 2300
6212340 26R 21x 23 170 215 026180 27-21x41 21 500 2500
6212690 26R 24x 27 190 300
6212770 26R 25x 28 200 350 026052 27d/35d-19 (19.05mmx500) 19 500 1095
6213070 26R 30x 32 200 380 026152 27d/35d-21 (20.89mmx500) 21 500 1300
6213310 26R 36x 41 220 650
26RS 28
STEPPED TOMMY BAR 4-WAY WHEEL WRENCH
› Chrome Vanadium steel 31CrV3, hardened. › Chrome Vanadium steel 31CrV3.
› Chrome plated. › Blue epoxy powder coated.
Code No. y
652806 26RS 1 - Fits 26R 6x7 - 10x11 190 40
652814 26RS 2 - Fits 26R 12x13 - 16x17 240 140
652822 26RS 3 - Fits 26R 17x19 - 36x41 330 500
KD-26R
BOX SPANNER SET
7 pieces
*WHILE STOCKS LAST

Code No. Size y 0
Code No. Contents Accessories 0 622761 28 PU 17x19 21x22 420x420 1360
8x9 10x11 12x13 14x15 622869 28 CV 19x20 24x27 595x583 3690
621846 KD-26R 26RS 2 Tommy Bar 0.685
16x17 18x19 6229150 28 LV * 34.5x38 45x25.3 4900
92
Tyre Levers Filter Tools
38 / 39 36
TYRE LEVERS OIL FILTER STRAP WRENCH
› Chrome Vanadium steel 31CrV3. › Chrome plated.
› Drop forged. › Strong wide strap.
› 38 = Chrome plated. › Light duty.
› 39 = Blue epoxy powder coated.
38
Code No. y
6327320 36 / 1 220 307
6327400 36 / 2 285 470
5327380 E 36 / 1 Strap
39 5327460 E 36 / 2 Strap
1.75
Code No. y 0 OIL FILTER HOOK
633267 38 / 400 400 0.458
633283 38 / 500 500 0.576 › Three-arm pattern.
633305 39 / 610 610 1.463 › For removing firmly seated oil filters.
Pry Bars
139 Code No. y

8117420 1.75/1 60-120 600
PRY BARS
› Chrome Vanadium steel 31CrV3. Spark Plug Tools
› Drop forged.
50
SPARK PLUG SOCKET
Code No. y 0 › Chrome plated.
1396597 139 - 350X19 Pry Bar 350 0.797 › To be used in conjuction with 1/2” drive socket accessories.
1396598 139 - 450X19 Pry Bar 450 1.020
SAWS 98
Code No. y
636614 50/20,8mm-13/16 63 119
93
AUTOMOTIVE TOOLS
54 647
SPARK PLUG SOCKET SPARK PLUG BRUSH
› Chrome Vanadium steel 31CrV3. › With plastic handle and brass wire bristles.
› Chrome plated.
› To be used in conjuction with 1/2” drive socket accessories.
Code No. Bristle Length y

Code No. 6531950 647 15mm 180 22
y
636622 54 / 16mm 63 96
Lifters
55 121 G
SPARK PLUG SPANNER SUCTION CUP LIFTER
› Chrome Vanadium steel 31CrV3. › Two hinged suction heads with safety locking.
› Chrome plated. › Oil and acid resistant ABS plastic.
› Hot forged socket head with plug retainer, swivel joint. › Lifting capacity approximately 80kg.
› Handle with blue PVC sleeve.
*INDENT ONLY
Code No. y Code No. , y 0
636606 55 / 20,8mm 238 298 6391170 121 G * 120 390 1.25
58 121 G-3
SPARK PLUG SPANNER SUCTION CUP LIFTER
› Chrome Vanadium steel 31CrV3. › Three hinged suction heads with safety locking.
› Hot forged socket head with plug retainer. › Oil and acid resistant ABS plastic.
› Chrome plated. › For curved glass and panels.
› Swivel joint. › Lifting capacity approximately 120kg.
Code No. y
636355 58 / 16mm 301 330
636339 58 / 20,8 mm 500 340 *INDENT ONLY
636347 58 / 16 & T-Bar 301 455
636312 58 / 20,8 & T-Bar 500 465 Code No. , 0
636320 58 Tommy Bar 199 125 6390870 121 G-3 * 120 1.27
94
642 SP 126
MAGNETIC LIFTER PISTON RING PLIERS
with lamp, mirror and clip › For secure fitting of piston rings.
› Handles with blue sleeves.
› For searching for and picking up of small metal parts in
confined areas.
› Magnet can be removed if necessary.
› Mirror diameter 30mm.
Code No. Diameter of magnet y Code No. O y 0

6536750 642 SP 12mm 500 172 6397370 126 1-100 55-100 200 0.250
6397450 126 2-120 80-120 240 0.410
640 126-060
MAGNETIC LIFTER PISTON RING PLIERS
› With flexible shaft and plastic handle. › For secure fitting of piston rings.
› Bright nickel plated. › With prism holder and adjusting screw.
*WHILE STOCKS LAST

Code No. Diameter of magnet y Code No. , y 0
6531280 640 12mm 520 230 6397100 126 0-60 * 30-60 210 0.160
Pistons / Valves / Special Pliers

128
VALVE SPRING TENSIONER
125
› For overhead valve engines with one each straight and offset pair of hooks.
PISTON RING CLAMP BAND › Bright nickel plated.
› Type 2-225 handle with blue sleeve.
› Made from special spring strip steel with continuous adjustment.
› With tightening key.
*WHILE STOCKS LAST

Code No. , y 0 Code No. , y 0
6396800 125-1 57-125 80 0.310 6398500 128 2-225 60-225 290 1.20
6396990 125-2 90-175 80 0.350 6398690 128 1-280 * 120-280 390 3.25
6397020 125-3 90-175 165 0.650
95
AUTOMOTIVE TOOLS
132 132 CLIC

HOSE CLAMP PLIERS CLIC HOSE CLAMP PLIERS
› For self-clamping hose clips. › For CLIC-R hose clamps.
› Chrome plated handles. › Polished, bright nickel plated, joint gunmetal finished.
› Forged for clip sizes 5-30mm.
*INDENT ONLY *INDENT ONLY

6399900 132-220 * 220 0.215 1396714 132-180 * 180 0.247
8134 8276
INSTALLATION PLIERS BALANCE WEIGHT PLIERS
*INDENT ONLY
6722030 8134-170C * 170 0.200 6739350 8276-250C 250 0.315
Brake Tools Measuring Tools
135 STEEL RULER

BRAKE SPRING PLIERS
› Chrome Vanadium steel 31CrV3. › Stainless steel with polished finish.
› For drum brakes. › Permanently engraved.
› With special holder and support crown, especially suitable for adhesive brake linings. › Metric to imperial conversion table on reverse side.
› Chrome plated.
*WHILE STOCKS LAST

Code No. y q 0
Code No. y 0 0134000 Measuring Rule - 150mm 150 6 0.050
6405300 135 - 13 330 0.370 0134100 Measuring Rule - 300mm 300 12 0.060
6405490 135 -19 * 480 0.850 0134300 Measuring Rule - 600mm 600 24 0.120
96
702
FEELER GAUGE SET
› With protective handle.
› Handle nickel plated.
› Folding.
› Blade length 100mm.
Code No. Contents 0

6547790 702 13 M 5 10 15 20 25 30 40 50 60 70 80 90 100 0.065
6547870 702 20 M 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 0.100
6547950 702 21 M 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 0.068
6548680 702 13 A .002AF .003AF .004AF .005AF .006AF .008AF .010AF .012AF .015AF .020AF .025AF .030AF .035AF 0.055
6548760 702 22 A .004 - .025 increasing by 1/1000” 0.081
6548840 702 26 A .0015 - .025 increasing by 1/1000” 0.080
PRECISION
ENGINEERING
TOOLS
INSIDE SPRING CALIPER OUTSIDE SPRING CALIPER SPRING DIVIDER
Code No. y q 0 Code No. y q 0 Code No. y q 0

0140100 Inside Spring Caliper 100 4 0.085 0141100 Outside Spring Caliper 100 4 0.080 0142000 Spring Divider 75 3 0.080
ENGINEERS ENGINEERS
SCRIBER SQUARE
› Double-ended with one straight point and the other at 90 degrees. › Hardened blade.
› Ideal for use in confined spaces. › Accurately ground blade and stock ensures
straightness and parallelism.
› Accurate right angles on inside and outside.
› Ideal for setting up and checking machinery.
Code No. Blade Length y 0

0110100 Engineers Square - 75mm 75 0.115
Code No. y 0 0110200 Engineers Square - 100mm 100 0.133
0321001 Engineers Scriber 190 0.045 0110300 Engineers Square - 150mm 150 0.288
97
AUTOMOTIVE TOOLS
Saws Miscellaneous
403 BRASS PUMP

HACKSAW OIL CAN
› Adjustable tubular steel frame. › Dome shaped body.
› For 10” and 12” hacksaw blades. › Brass suction pump.
› Shatterproof blades. › Heavy gauge tin.
› Powder coated.
› Pump has two ball valves.
› Lack of spring on the bottom suction
valve prevents malfunctioning.
Code No. y 0 Code No. Capacity (ml) 0

039010 403 435 0.360 4163300 Brass Pump Oil Can 500 0.278
5500350 403A Hacksaw Blade 24TPI - Pack of 10 300 0.120
407 4530
HACKSAW TOWROPE
› Pressure cast aluminium.
› Ergonomic soft rubber grips.
› Adjust saw blade by turning blue clamping element in the hand grip.
Code No. 0 Code No. y 0

1879375 407 0.650 669776 4530- 2 Ton 3500 0.310
669806 4530- 4 Ton 3500 1.700
JUNIOR SAFETY GLASSES

HACKSAW
› Powder coated, steel wire frame. › Euro type spectacles, polycarbonate lens CE (EN 166-2001).
› Easy blade replacement. › Clear anti-scratch lens.
› Shatterproof blade.
› Finger guard prevents injury.
Code No. 0 Code No. 0

3012000 Junior Hacksaw 0.083 200638 DV026C Safety Glasses & Bag 0.035
98
G-CLAMPS 905
CREEPER
› Ergonomically shaped one-piece creeper.
› With practical carrying handle
› Made form PP (polypropylene)
› Six swivel castors ensure easy, safe manoeuvrability
› Two storage trays
› Head and neck cushion for maximum comfort
› Bucket moulding gives additional support and allows freedom of movement
› Carrying capacity: 130kg
› Temperature range: -30C to +60C
› Dimensions: 1030 x 480 x 115mm
Code No. y q 0
3580000 G-Clamp 75 3 0.500
3580100 G-Clamp 100 4 0.900
3580200 G-Clamp 150 6 1.400
3580300 G-Clamp 200 8 1.500
299
DRAIN PLUG SPANNER
› Chrome plated.
› For square bungs on engine pumps, tanks and drums for oil and chemicals.
› Five square sizes: 8.7 9.5 10.5 11.5 13mm
› Four tapered sizes: 6.8-8.7 10.5-13 15.2-18 16.5-19mm Code No. 0
› One screwdriver blade: 5.5 x 18mm
1823698 905 5.00
Tool Bags
Code No. y 0
6464580 299 220 0.450
TOOL BELTS
TOOL BAG / WAIST POUCH
907 › Fabric construction in 600D polyester canvas.
› Water repellent and durable.
FENDER PROTECTOR › Toolbag: 38mm reinforced polypropylene webbing straps.
› Waist Pouch: 25mm reinforced polypropylene webbing straps.
› YKK zip and nickel rivets for additional reinforcing.
› Protection from unwanted scratches, dents and dirt. › Reinforced loops for screwdrivers and pliers.
› Magnetic attachment keeps paintwork safe from damage – also attaches to galvanised steel.
› Rugged, padded imitation leather and reinforced edges provide a perfect, cushioned working area.
› Dimensions: 1100x650mm with wheel cut-out to allow easy acccess.
Waist Pouch
Zipped Tool Bag
Code No. 0
545200 Zipped Tool Bag 0.350
Code No. y 0 Code No. 0
1942956 907 1100 0.620 545210 Waist Pouch 0.200
99
AUTOMOTIVE TOOLS
ELECTRICIAN‘S TOOL CASE TOOL JACKET

› Double stitched and bound. › High quality tear resistant fabric made from 600D polyester.
› Very durable water repellent inner lining. › Strong industrial seams.
› Heavy duty zip. › Universal size with four lateral buckles for resizing.
› Reinforced inners. › One back pocket with zips.
› Two right-hand pockets and four left-hand pockets.
› Elastic screwdriver holder.
› Reflector strips front and back for improved visibility.
TOOLS NOT INCLUDED
See pg. 223 for complete Electrcians Toolset.

545220 Tool case - EMPTY 2.25 1818260 Tool Jacket 0.730
TOOL RUCKSACK 507

LEISURE MOTORIST TOOLKIT
› 600x600D water repellent polyester fabric.
› Double stitched and bound. › In a black canvas case with zip fastener.
› 10cf-thick extra heavy duty zip.
› Three front velcro-closing pockets with reflective strip.
› Inside detachable divider with fabric sleeves to hold tools with clear velcro sleeve cover.
› Reinforced padded back with reinforced padded back straps.
TOOLS NOT INCLUDED
*WHILE STOCKS LAST
Code Contents 0
668097 2.36
Spanners NO.6 8x9 10x11 12x13 14x15 16x17 19x22
Screwdrivers 2150 6.5
2160 PH2
Accessories
See pg. 228 for complete Rucksack Toolset. 26RST x 175 Socket & T-Bar Reflective Vest
60CP-250 Shifting Spanner Leather Gloves
Code No. 0 145/250 Universal Pliers
545190 Rucksack - EMPTY 1.00
100
5017
JAZZ TOOL ASSORTMENT
› Dimensions: L=440 x W=400 x H=100mm.
*WHILE STOCKS LAST
Code Contents 0 Accessories

677010 9.12 1993 Z-94 Ratchet 1990-250 Extension
Spanners No.7 10 11 12 13 14 15 16 17 19 2093 Z-94 Ratchet 1990-125 Extension
Allen Keys 42-88M 2 2.5 3 4 5 6 8 10 2087 Sliding T-Bar 1995 Universal Joint
Screwdrivers 2150 3-150 4-150 6.5 2088 Flexible Extension 55/20.8 Spark Plug Spanner
2160 PH1 PH2 2090-4 Extension 2090-6 Extension
Sockets C19 10 11 12 13 14 15 17 19 22 24 Voltage Tester 140-2K 145-250 Universal Pliers
No.20 5 6 7 8 9 10 11 12 13 137-250 Grip Pliers 8250 200JC Combination Pliers
8601-500 Ball Pein Hammer
SORTIMO
GENERAL TOOL ASSORTMENT
› Dimensions: L=442 x W=357 x H=151mm.
*WHILE STOCKS LAST

677001 9.06 145-250 Waterpump Pliers 8250-200 JC Combination Pliers
Allen Keys 42-88M 2 2.5 3 4 5 6 8 10 95-200 Flat Cold Chisel 8316-200 JC Side Cutters
Screwdrivers 2150 6.5 5.5-150 Voltage Tester 140-2K 1990-125 Extension
2160 PH1 PH2 PH3 1993U-10T Reversible Ratchet 1990-250 Extension
Sockets D19 10 11 12 13 14 15 16 17 18 19 21 22 24 1987 Sliding T-bar No.62 Adjustable Wrench - 200mm
502
MOTORIST TOOLKIT
› In a black canvas case with zip fastener and carry strap.

651125 3.86 1990/125 Extension 62/200 Adjustable Wrench
Spanners NO.6 10x11 12x13 14x15 16x17 19x22 1993U-10K Plastic Ratchet 145/250 Universal Pliers
Screwdrivers 2150 6.5 3-150 9534-05 Tape Measure 4530 Tow Rope – 2-Ton
2160 PH1 PH2 9930 Torch 9999.900 Multifunction Pliers
Sockets C19 10-3/8 12 13-1/2 17 19-3/4 22
101
SHEETMETAL &
TOOL ASSORTMENTS
102 - 127
102
SHEETMETAL
TOOL ASSORTMENTS
TOOLBOXES / TRAYS / TRUNKS ASSORTMENTS / CABINETS ARTISANS WORKSTATIONS

104 107 116
VICES TOOL PANELS DRAWER UNITS

117 117 117
TOOL CHESTS TOOL TROLLEYS MODULAR ASSORTMENTS

118 120 122
SHEETMETAL / TOOL ASSORTMENTS
Toolboxes
1260
TOOLBOX
3 compartments
› With riveted joins.

› Strong structure, smooth and easy opening and closing.
› Maximum access to bottom tray.
› Lockable, phosphated and powder coated to prevent corrosion.
› L=460 x W=248 x H=173mm.
Code No. 0
660868 1260 4.700
1261
TOOLBOX
5 compartments

› L=460 x W=248 x H=220mm.
Code No. 0
660876 1261 6.200
1282 / 5
TOOLBOX
5 compartments

› Plastic Handle: ZA Registration Design 2005/0507.
› L=460 x W=248 x H=220mm.
› Designed to accommodate all modular kits.
Code No. 0
660957 1282/5 7.500
104
1335 TRAYS
TOOLBOX SHEETMETAL TRAYS
5 compartments › Trays Fit Into: 1280 / 1281 / 1282 Toolboxes

Code No.
561150 1280/81 - Metal Tray
› With riveted joins 561266 1280/81 - D32 Metal Tray
› Strong structure, smooth and 561401 1282 - Metal Tray
easy opening and closing.
561428 1282 - D32 Metal Tray
› Lockable, phosphated and
powder coated to prevent corrosion.
› L=550 x W=248 x H=220mm. INSERTS
VACUUM MOULDED INSERTS
› Inserts Fit Into: 1281 / 1282 Toolboxes 1425 Tool Chest
1575 / 1581 Tool Trolleys 1502 Drawer Unit
1401 / 1404 Tool Cabinets
Code No. 0 Code No.

661058 1335 6.000 561347 1280/81-7M INS
561134 1280/81-1B INS
561169 1280/81-1B AF INS
561142 1280/81-DI9 INS
561126 1280/81-D19ACC INS
561185 1280/81-22-ACC INS
MODULAR ASSORTMENTS 1 22 561193 1281/82-1B 62H INS
561207 1280/81-D19/IN19 INS
561215 1280/81-D19 ACC/SKT INS
561258 1280/81-D32/6 INS
561274 1280/81-PL/137/36 INS
561283 1282-SD-PH-STB INS
561291 1282-SD-MEC-EL INS
561304 1282-4/ACC INS
561312 1282 - EXT INS
561322 1282 - 6SD INS
561339 1282 - UTILITY INS
561355 1282 - D20 EZ INS
561363 1282 - PLIER INS
561371 1282 - 1B 18 INS
561398 1282 - 8601 ACC INS
Die-cast Aluminium Toolbox
1281
TOOLBOX
5 compartments
› Robust, rust-free, rounded corners.

› Cast-in lid hinges with non-removeable pins. Lockable.
› Plastic Handle: ZA Registration
Design 2005/0507.
› Phosphated and powder coated
to prevent corrosion.
› L=460 x W=240 x H=220mm.
Code No. 0
660949 1281 6.500
105
Tool Trunks
1460
TOOL TRUNKS
› Strong structure, smooth operating hinges.
› Lockable.
› Phosphated and powder coated to prevent corrosion.
› 1460: Silver galvanized tray is purchased separate. 1
› 1460: Nests.
2
3
4
5
1460-91
Code No. L H W 0
663837 1460-59 587 252 203 7.000
663839 1460-65 651 284 280 7.000
663840 1460-65S 651 284 280 7.000
663841 1460-70 717 314 388 10.000
663843 1460-80 801 379 471 14.000
663844 1460-80S 801 379 471 14.000
663845 1460-91 910 431 554 14.000
1425 / 27 / SP MODULAR ASSORTMENT 1 23 REF L-PL / 137 / 36 PLASTIC INSERT 1 26
106
Tool Assortments
1281-C19-1BM d
TOOL ASSORTMENT Die-cast Aluminium
*WHILE STOCKS LAST
Code No. 1B Spanners 42-88M Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678155 1281-C19-1BM 6 7 8 9 10 11 12 2 2,5 3 4 5 6 2150 1281 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 15.860
13 14 15 16 17 18 8 10 4 1280/81 D19 ACC Insert 13-1/2 14 15-19/32 16- 145/250 Universal Pliers
19 20 21 22 5.5 1280/81 1B Insert 5/8 17 18-11/16 19-3/4 1990-75 Extension
6.5 1280/81 D19 Insert 21-13/16 22 24-15/16 1990-125 Extension
8 1280/81 Tray 26-1. 27-1.1/16 29-1.1/8 1990-250 Extension
2160 30-1.3/16 32-1.1/4 137/250 Grip Pliers
PH1 1987 Sliding T-Bar
PH2 1993U-10T Rev. Ratchet
1997/375 Power Bar
1995 Universal Joint
Die-cast Aluminium
d
1281 / 1282-C19-1BM-62
TOOL ASSORTMENT
*WHILE STOCKS LAST
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets Accessories 0
678511 1281-C19-1BM-62 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1281 / 1282 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 16.000
679003 1282-C19-1BM-62 13 14 15 16 17 18 4 5 6 8 10 3-150 1281/82-1B/62 Insert 13-1/2 14 15-19/32 143/250 Universal Pliers 17.000
19 20 21 22 4 1280/81-D19/IN19 Insert 16-5/8 17 18-11/16 1990-75 Extension
IN19 sockets 4-150 1280/81-D19 ACC/SKT 19-3/4 21-13/16 22 1990-125 Extension
5 6 8 10 12 14 5.5 Insert 24-15/16 26-1. 27-1.1/16 1990-250 Extension
6.5 1282-SD-PH-STB Insert 29-1.1/8 30-1.3/16 1995 Universal Joint
8 1282-SD-MEC-EL Insert 32-1.1/4 7/16AF 9/16AF 62/250 Adjustable Wrench
2153 1281 - 1280/81 Tray 7/8AF 1987 Sliding T-Bar
5.5 1282 - 1282 Tray 1993U-10T Ratchet
2160
PH1
PH2
2161
PH2
107
1281 / 1282-D19-1BM-62 Die-cast Aluminium

d
TOOL ASSORTMENT
*WHILE STOCKS LAST
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 Sockets Accessories 0
678554 1281-D19-1BM-62 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1281 / 1282 Toolbox 8 10 11 12 13 14 15 50/20.8 Spark Plug Socket 16.000
679070 1282-D19-1BM-62 13 14 15 16 17 18 4 5 6 8 10 3-150 1281/82-1B/62 Insert 16 17 19 21 22 23 24 143/250 Universal Pliers 17.000
19 20 21 22 4 1280/81-D19/IN19 Insert 26 27 28 30 32 7/16AF 1990-75 Extension
IN19 sockets 4-150 1280/81-D19 ACC/SKT 9/16AF 7/8AF 1990-125 Extension
5 6 8 10 12 14 5.5 Insert 1990-250 Extension
6.5 1282-SD-PH-STB Insert 1995 Universal Joint
8 1282-SD-MEC-EL Insert 62/250 Adjustable Wrench
2153 1281 - 1280/81 Tray 1987 Sliding T-Bar
5.5 1281 - 1282 Tray 1993U-10T Rev. Ratchet
2160
PH1
PH2
2161
PH2
d
1281-D19-1BA-U3 Die-cast Aluminium
TOOL ASSORTMENT
*WHILE STOCKS LAST
678597 1281-D19-1BA-U3 1/4AF 5/16AF 3/8AF 42-88P 3/32AF 2150 1281 Toolbox 5/16AF 3/8AF 13/32AF 50/20.8 Spark Plug Socket 16.220
7/16AF 1/2AF 9/16AF 1/8AF 5/32AF 3-150 1280/81-1B AF. Insert 7/16AF 1/2AF 9/16AF 142/250 Universal Pliers
5/8AF 11/16AF 3/16AF 7/32AF 4 1280/81-D19 ACC Skt Insert 19/32AF 5/8AF 11/16AF 137/250 Grip Pliers
3/4AF 13/16AF 7/8AF 1/4AF 5/16AF 4-150 1280/81-D19/IN19 Insert 3/4AF 25/32AF 13/16AF 702/13 A Feeler Gauge Set
15/16AF 1. AF 3/8AF 5.5 1280/81 Tray 7/8AF 15/16AF 1. AF 1987 Sliding T-Bar
6.5 1.1/16 1.1/8 1.3/16 1990-75 Extension
IN19 sockets 8 1.1/4 1990-125 Extension
3/16AF 1/4AF 2153 1990-250 Extension
5/16AF 3/8AF 5.5 1995 Universal Joint
1/2AF 9/16AF 2160 1993U-3 Rev. Ratchet
PH1
PH2
2161
PH2
108
1282-C19-1BM-62-PL d
TOOL ASSORTMENT
679240 1282-C19-1BM-62-PL 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 18.500
13 14 15 16 17 18 4 5 6 8 10 4 1281/82-1B/62 Insert 13-1/2 14 15-19/32 16- 62/250 Adjustable Wrench
19 20 21 22 5.5 1280/81-D19/IN19 Insert 5/8 17 18-11/16 19-3/4 143/250 Universal Pliers
IN19 sockets 6.5 1280/81-D19 ACC/SKT 21-13/16 22 24-15/16 1987 Sliding T-Bar
5 6 8 10 12 14 8 Insert 26-1. 27-1.1/16 29-1.1/8 1990-75 Extension
2160 1282 - 6SD Insert 30-1.3/16 32-1.1/4 1990-125 Extension
PH1 1282 - Pliers Insert 7/16AF 9/16AF 7/8AF 1990-250 Extension
PH2 1282 Tray 1995 Universal Joint
1993U-10T Rev. Ratchet
Pliers
8132-200 JC Telephone Pliers
8250-200 JC Combination Pliers
8316-200 JC Side Cutters
d
1282-D19-1BM-62-PL
TOOL ASSORTMENT
679267 1282-D19-1BM-62-PL 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8 10 11 12 13 14 15 50/20.8 Spark Plug Socket 18.500
13 14 15 16 17 18 4 5 6 8 10 4 1281/82-1B/62 Insert 16 17 19 21 22 23 24 62/250 Adjustable Wrench
19 20 21 22 5.5 1280/81-D19/IN19 Insert 26 27 28 30 32 7/16AF 143/250 Universal Pliers
IN19 sockets 6.5 1280/81-D19 ACC/SKT 9/16AF 7/8AF 1987 Sliding T-Bar
5 6 8 10 12 14 8 Insert 1990-75 Extension
2160 1282 - 6SD Insert 1990-125 Extension
PH1 1282 - Pliers Insert 1990-250 Extension
PH2 1282 Tray 1995 Universal Joint
Pliers
109
1282-C19Z-1BM-62 d
TOOL ASSORTMENT
679119 1282-C19Z-1BM-62 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 18.500
13 14 15 16 17 18 4 5 6 8 10 3-150 1281/82-1B/62 Insert 13-1/2 14 15-19/32 16- 143/250 Universal Pliers
19 20 21 22 4 1280/81-D19/IN19 Insert 5/8 17 18-11/16 19-3/4 62/250 Adjustable Wrench
IN19 sockets 4-150 1280/81-D19 ACC/SKT 21-13/16 22 24-15/16 1987 Sliding T-Bar
5 6 8 10 12 14 5.5 Insert 26-1. 27-1.1/16 29-1.1/8 1990-75 Extension
6.5 1282-SD-PH-STB Insert 30-1.3/16 32-1.1/4 1990-125 Extension
8 1282-SD-MEC-EL Insert 7/16AF 9/16AF 7/8AF 1990-250 Extension
2153 1282 Tray 1995 Universal Joint
5.5 1993Z-94 Ratchet +Coupler
2160
PH1
PH2
2161
PH2
d
1282-C19-1BMZ-PL-6SD
TOOL ASSORTMENT
Plastic inserts High-density foam inserts
679232 1282-C19-1BMZ-PL- 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8-5/16 10-3/8 11 12 137/250 Grip Pliers 18.000
6SD (plastic inserts) 13 14 15 16 17 18 4 5 6 8 10 4 1280/81-DI9 Insert 13-1/2 14 15-19/32 16- 145/250 Universal Pliers
679408 1282-FM-C19-1BMZ- 19 20 21 22 5.5 1280/81-1B Insert 5/8 17 18-11/16 19-3/4 1987 Sliding T-Bar
PL-6SD (foam inserts) 6.5 1282 - EXT Insert 21-13/16 22 24-15/16 1990-75 Extension
8 1282 - 6SD Insert 26-1. 27-1.1/16 29-1.1/8 1990-125 Extension
2160 1282 - Pliers Insert 30-1.3/16 32-1.1/4 1990-250 Extension
PH1 1282 Tray 1993Z-94 Ratchet + Coupler
PH2
Pliers
110
1282-D19-1BMZ-PL-6SD d
TOOL ASSORTMENT
679259 1282-D19-1BMZ- 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8 10 11 12 13 14 15 137/250 Grip Pliers 18.500
PL-6SD 13 14 15 16 17 18 4 5 6 8 10 4 1280/81-DI9 Insert 16 17 19 21 22 23 24 145/250 Universal Pliers
19 20 21 22 5.5 1280/81-1B Insert 26 27 28 30 32 1987 Sliding T-Bar
6.5 1282 - EXT Insert 1990-75 Extension
8 1282 - 6SD Insert 1990-125 Extension
2160 1282 - Pliers Insert 1990-250 Extension
PH1 1282 Tray 1993Z-94 Ratchet + Coupler
PH2
Pliers
d
1282-C19-1BMZ-10SD
TOOL ASSORTMENT
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 Sockets (679135) Accessories 0
679135 1282-C19-1BMZ-10SD 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1282 Toolbox 8-5/16 10-3/8 11 12 137/250 Grip Pliers 19.500
679291 1282-D19-1BMZ-10SD 13 14 15 16 17 18 4 5 6 8 10 3-150 1280/81-DI9 Insert 13-1/2 14 15-19/32 16- 145/250 Universal Pliers 19.500
19 20 21 22 4 1280/81-1B Insert 5/8 17 18-11/16 19-3/4 1987 Sliding T-Bar
4-150 1282 - EXT Insert 21-13/16 22 24-15/16 1990-75 Extension
5.5 1282-SD-PH-STB Insert 26-1. 27-1.1/16 29-1.1/8 1990-125 Extension
6.5 1282-SD-MEC-EL Insert 30-1.3/16 32-1.1/4 1990-250 Extension
8 1282 Tray 1993Z-94 Ratchet + Coupler
2153 D19 Sockets (679291)
5.5 8 10 11 12 13 14 15 16
2160 17 18 19 21 22 24 26 27
PH1 29 30 32
PH2
2161
PH2
111
1281-C19/22-1BA-U3 d
Die-cast Aluminium
TOOL ASSORTMENT
*WHILE STOCKS LAST
678589 1281-C19/22-1BA-U3 1/4AF 5/16AF 3/8AF 7/16AF 42-88P 3/32AF 1/8AF 2150 1281 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 16.420
1/2AF 9/16AF 5/8AF 5/32AF 3/16AF 7/32AF 3-150 1280/81-1B AF. Insert 13-1/2 14 15-19/32 16- 137/250 Grip Pliers
11/16AF 3/4AF 13/16AF 1/4AF 5/16AF 3/8AF 4 1280/81-DI9 Insert 5/8 17 18-11/16 19-3/4 141/250 Universal Pliers
7/8AF 15/16AF 1.AF 4-150 1280/81-22 ACC Insert 21-13/16 22 24-15/16 1987 Sliding T-Bar
5.5 1280/81 Tray 26-1. 27-1.1/16 29-1.1/8 1990-75 Extension
6.5 30-1.3/16 32-1.1/4 1990-125 Extension
8 7/16AF 9/16AF 7/8AF 1990-250 Extension
2153 1997/375 Power Bar
5.5 1995 Universal Joint
2160 1993U-3 Rev. Ratchet
PH1
PH2
2161
PH2
d
1281/1282-C19/22-1BM-10SD Die-cast Aluminium
TOOL ASSORTMENT
*WHILE STOCKS LAST
678538 1281-C19/22-1BM-10SD 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1281/1282 Toolbox 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 16.500
679011 1282-C19/22-1BM-10SD 13 14 15 16 17 18 4 5 6 8 10 3-150 1281/2 13-1/2 14 15-19/32 137/250 Grip Pliers 18.500
19 20 21 22 4 1280/81-1B Insert 16-5/8 17 18-11/16 19 145/250 Universal Pliers
4-150 1280/81-D19 Insert 21-13/16 22 24-15/16 1987 Sliding T-Bar
5.5 1280/81-22-ACC Insert 26-1. 27-1.1/16 29-1.1/8 1990-75 Extension
6.5 1282 30-1.3/16 32-1.1/4 1990-125 Extension
8 1282-SD-PH-STB Insert 7/16AF 9/16AF 7/8AF 1990-250 Extension
2153 1282-SD-MEC-EL Insert 1997/375 Power Bar
5.5 1280/81 Tray 1995 Universal Joint
2160 1282 Tray 1993U-10T Rev. Ratchet
PH1
PH2
2161
PH2
112
1281/1282-D19/22-1BM-10SD Die-cast Aluminium d
TOOL ASSORTMENT
*WHILE STOCKS LAST
678546 1281-D19/22-1BM-10SD 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1281/1282 Toolbox 8 9 10 11 12 13 14 50/20.8 Spark Plug Socket 16.500
679089 1282-D19/22-1BM-10SD 13 14 15 16 17 18 4 5 6 8 10 3-150 1281/2 15 16 17 18 19 20 21 137/250 Grip Pliers 18.500
19 20 21 22 4 1280/81-1B Insert 22 24 26 27 28 29 145/250 Universal Pliers
4-150 1280/81-D19 Insert 30 32 1987 Sliding T-Bar
5.5 1280/81-22-ACC Insert 1990-75 Extension
6.5 1282 1990-125 Extension
8 1282-SD-PH-STB Insert 1990-250 Extension
2153 1282-SD-MEC-EL Insert 1997/375 Power Bar
5.5 1280/81 Tray 1995 Universal Joint
2160 1282 Tray 1993U-10T Rev. Ratchet
PH1
PH2
2161
PH2
Die-cast Aluminium d
1281/1282-C32/19-1BM-62 e
TOOL ASSORTMENT
*WHILE STOCKS LAST
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray C19 / C32 Sockets Accessories 0
678740 1281-C32/19-1BM-62 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 1281/1282 Toolbox C19 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 25.500
679038 1282-C32/19-1BM-62 13 14 15 16 17 18 4 5 6 8 10 3-150 1281/2 13-1/2 14 15-19/32 16- 62/250 Adjustable Wrench 26.500
19 20 21 22 4 1281/82-1B/62 Insert 5/8 17 18-11/16 19-3/4 143/250 Universal Pliers
IN19 sockets 4-150 1280/81-D19/IN19 Insert 21-13/16 22 24-15/16 1987 Sliding T-Bar
5 6 8 10 12 14 5.5 1280/81-D19 ACC/SKT 26-1. 27-1.1/16 29-1.1/8 1990-75 Extension
6.5 Insert 30-1.3/16 32-1.1/4 1990-125 Extension
8 1280/81-D32/6 Insert 7/16AF 9/16AF 7/8AF 1990-250 Extension
2153 1282 1995 Universal Joint
5.5 1282-SD-PH-STB Insert C32 1.3/8AF 36-1.7/16 1993U-10T Rev. Ratchet
2160 1282-SD-MEC-EL Insert 38-1.1/2 41-1.5/8 3287/447 Sliding T-Bar
PH1 1280/81 - D32 Tray 46-1.13/16 50-2. 3290-200mm Extension
PH2 1282 - D32 Tray 3290-400mm Extension
2161 3293U-1/440 Ratchet
PH2
113
1282-D32/19-1BM-62 d
e
TOOL ASSORTMENT
Code No. 1B Spanners Allen Keys Screwdrivers Toolbox / Inserts / Tray D19 / D32 Sockets Accessories 0
679097 1282-D32/19-1BM-62 6 7 8 9 10 11 12 13 42-88M 2 2,5 3 2150 1282 Toolbox D19 8 10 11 12 13 14 50/20.8 Spark Plug Socket 25.610
14 15 16 17 18 19 4 5 6 8 10 3-150 1280/81-1B/62 Insert 15 16 17 19 21 22 62/250 Adjustable Wrench
20 21 22 4 1280/81-D19/IN19 Insert 23 24 26 27 28 30 32 143/250 Universal Pliers
4-150 1280/81-D19 ACC/SKT 7/16AF 9/16AF 7/8AF 1987 Sliding T-Bar
IN19 5 6 8 10
5.5 Insert 1990-75 Extension
12 14
6.5 1280/81-D32/6 Insert D32 34 36 38 41 46 50 1990-125 Extension
8 1282-SD-PH-STB Insert 1990-250 Extension
2153 1282-SD-MEC-EL Insert 1995 Universal Joint
5.5 1282 - D32 Tray 1993U-10T Rev. Ratchet
2160 3287/447 Sliding T-Bar
PH1 3290-200mm Extension
PH2 3290-400mm Extension
2161 3293U-1/440 Rev. Ratchet
PH2
Tool Cabinets
1401 / 1401 PRO d
TOOL CABINET / ASSORTMENT
› Ideal for the professional workshop.

› Rigid sheetmetal structure with precision CNC punched pegboard.
› Three easy-slide drawers incorporating extra strong ball bearing slide mechanisms.
› One moveable tray, spanner and screwdriver rack and an assortment of moveable hanging
hooks for maximum flexibility.
› Lockable.
› Phosphated to prevent corrosion. Blue and grey powder coated.
› L=650 x W=250 x H=970. * Picture for illustration purposes only.
Code No. Accessories 0

661155 1401 - EMPTY with Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 6-Piece 1 x Double Storage Tray 1 x Punch Holder 45.000
Code No. 1B Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
661163 1401 PRO - 6 7 8 9 10 11 12 13 42-88M 2 2,5 3 2150 1401 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 55.000
With Accessories 14 15 16 17 18 19 4 5 6 8 10 3-150 13-1/2 14 15-19/32 16- 62/250 Adjustable Wrench
and Tools 20 21 22 4 Accessories 5/8 17 18-11/16 19-3/4 137/250 Grip Pliers
IN19 5 6 8 10 4-150 30 x Plastic Holders 21-13/16 22 24-15/16 143/250 Universal Pliers
12 14 5.5 with Pins 26-1. 27-1.1/16 29-1.1/8 225/250 Pipe Wrench
6.5 1 x Tool Rack: 17-Pin 30-1.3/16 32-1.1/4 1987 Sliding T-Bar
8 1 x Double Storage Tray 7/16AF 9/16AF 7/8AF 1990-75 Extension
2153 1 x Screwdriver Rack: 1990-125 Extension
5.5 6-Piece 1990-250 Extension
2160 1 x Punch Holder 1993Z-94 Ratchet + Coupler
PH1 1995 Universal Joint
PH2 8531/300 Tin Snips
2161 8601/500 Ball Pein Hammer
PH2
114
1401L / 1401L PRO d

› Rigid sheetmetal structure with precision
CNC punched pegboard.
› Five easy-slide drawers incorporating
extra strong ball bearing slide mechanisms.
› One moveable tray, spanner and screwdriver
rack and an assortment of moveable hanging
hooks for maximum flexibility.
› Lockable.
› Phosphated to prevent corrosion. Blue and grey
powder coated.
› L=1300 x W=250 x H=970.


662607 1401L - EMPTY with Accessories 1 x Hook 1 Pin: 10-Piece 1 x Double Storage Tray 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 10-Piece 90.000
Code No. Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
662608 1401L PRO - 1B/17M 6 7 8 9 10 42-88M 2 2,5 3 2150 1401L 8-5/16 10-3/8 11 12 43TV Torx® Gauge Tester 115.400
With Accessories 11 12 13 14 15 16 17 4 5 6 8 10 3-150 13-1/2 14 15-19/32 403 Hacksaw
and Tools 18 19 20 21 22 4 Accessories 16-5/8 17 19-3/4 22 23 9534.05 Tape Measure
IN19 5 6 8 10 4-150 1 x Hook 1 Pin: 10-piece 24-15/16 26-1. 27-1.1/16 9930.000 Torch
No.2/11M 6x7 8x9 12 14 5.5 1 x Tool Rack: 17-Pin 28 30-1.3/16 32-1.1/4 1987 Sliding T-Bar
10x11 12x13 14x15 6.5 1 x Double Storage Tray 1995 Universal Joint
16x17 17x19 18x19 42KL-7M 1,5 2 8 1 x Screwdriver Rack: 1990-75 Extension
20x22 21x23 24x30 2,5 3 4 5 6 2153 10-Piece 1990-125 Extension
5.5 1990-250 Extension
534/9M 10 11 12 13 43TX-9M T7 T8 2160 1993Z-94 PZK Ratchet & Coupler
14 15 16 17 19 T9 T10 T15 T20 PH1 227/350 Pipe Wrench
T25 T30 T40 PH2 1993 U-10K Plastic Ratchet
2161 36/1 Strap Wrench
PH2 145/250 Multigrip Pliers
62/300 Adjustable Wrench
8380-250TL Tower Pincers
8516-300 Tin Snips
106 Tool Punch Set
137/250 Grip Pliers
4611 Power Tester
8132-200JC Telephone Pliers
8316-200JC Side Cutters
8250-200JC Combination Pliers
S8000 Circlip Pliers Set
50-20.8 Spark Plug Socket
D30 FMZ Socket Set
VDE ELS/PH Screwdriver Set
ENGINEERING VICE 1 17 WORKSTATIONS 116
115
1404 / 1404 PRO d

› Rigid sheetmetal structure with precision
CNC punched pegboard.
› Three easy-slide drawers incorporating
extra strong ball bearing slide mechanisms.
› 80mm-deep doors to accommodate numerous accessories – moveable
shelves, hanging rack and screwdriver rack.
› Doors: ZA Registered Design – A2006/01314 & F2006/01315.
› Lockable.
› Phosphated to prevent corrosion. Blue and grey powder coated.
› L=650 x W=345 x H=970.

662976 1404 - EMPTY with Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Tool Rack: 6-Pin 6 x Small Storage Trays 2 x Large Storage Trays 1 x Screwdriver Rack 47.000
*WHILE STOCKS LAST

Code No. 1B Spanners Allen Keys Screwdrivers Tool Cabinet C19 Sockets Accessories 0
663115 1404 PRO * 6 7 8 9 10 11 12 13 42-88M 2 2,5 3 4 2150 1404 8-5/16 10-3/8 11 12 50/20.8 Spark Plug Socket 55.000
With Accessories 14 15 16 17 18 19 5 6 8 10 3-150 13-1/2 14 15-19/32 62/250 Adjustable Wrench
and Tools 20 21 22 4 Accessories 16-5/8 17 18-11/16 137/250 Grip Pliers
IN19 5 6 8 10 4-150 30 x Plastic Holders with Pins 19-3/4 21-13/16 22 143/250 Universal Pliers
12 14 5.5 1 x Tool Rack: 6-Pin 24-15/16 26-1. 27-1.1/16 225/250 Pipe Wrench
6.5 1 x Tool Rack: 17-Pin 29-1.1/8 30-1.3/16 403 Hacksaw
8 2 x Large Storage Trays 32-1.1/4 7/16AF 9/16AF 1987 Sliding T-Bar
2153 6 x Small Storage Trays 7/8AF 1990-75 Extension
5.5 1 x Screwdriver Rack 1990-125 Extension
2160 1990-250 Extension
PH1 1993Z-94 Ratchet + Coupler
2161 9534.05 Tape Measure
PH2 8132-200 JC Telephone Pliers
8531/300 Tin Snips
8601/500 Ball Pein Hammer
Workstations / Vices / Drawer Units / Tool Panels
1500W / 1500M Wooden Top
ARTISAN WORKSTATION
Galvanised Metal Top
› Ideal for the professional workshop or DIY enthusiast.
Drawer unit not included
Code No. Surface L W H 0

663166 1500-12 W Wooden 1200 mm 700 mm 900 mm 34.000
663174 1500-15 W Wooden 1500 mm 700 mm 900 mm 43.900
663182 1500-20 W Wooden 2000 mm 700 mm 900 mm 53.000
663557 1500-12 M Galvanised Metal 1200 mm 700 mm 900 mm 47.800
116
MV100 / MV150 EV150 / EV200
,
MECHANIC S VICE ENGINEERING VICE
› All steel construction. › Heavy duty engineering vice.
› Cast iron nut on spindle. › All steel robot welded construction.
› Robotic welded construction. › Robust sturdy design which can withstand hammer strikes.
› Steel anvil block. › Replaceable spindle and nut, the nut being virtually unbreakable.
› Replaceable jaw plates, which are serrated for better grip.
› Jaw inserts case hardened to between 540-650 HV (52-57 Rockwell).
› Proof load kn (kiloNewton): 150mm-54kN 200mm-90kN.
› Tensile strength of handle – 425 MPa – complies with SANS 6892.
Code No. O y 0 Code No. O y 0

6500640 MV-100mm 125 100 7.600 3351150G EV-150mm 175 150 25.000
6500720 MV-150mm 175 150 13.400 3350200G EV-200mm 225 200 45.500
MV100 / MV150 EV150 / EV200

SPARES SPARES
Code No. Code No.
7400001 MV-100mm Jaw Set Insert 7500001 EV-150mm Jaw Set Insert
7400002 MV-150mm Jaw Set Insert 7500002 EV-200mm Jaw Set Insert
7400100 MV-100mm Spindle & Nut Set 7500004 EV-150mm & EV-200mm Spring
7400150 MV-150mm Spindle & Nut Set 7500005 EV-150mm & EV-200mm Handle
7500006 EV-150mm & EV-200mm Spindle Only
7500003 EV-150mm & EV-200mm Nut Only
1502 1450S
DRAWER UNITS TOOL PANEL
› Sheetmetal drawer units for 1500 workbenches. › Ideal for the professional workshop or DIY enthusiast.
› Rigid sheetmetal pegboard structure.
› Numerous accessory options available.
› Phosphated to prevent corrosion.
› Grey powder coated.
› L=570 x W=20 x H=1010mm.
* Tools not included.
Code No. L W H 0 Code No. 0

663506 1502 / 2 565 395 365 18.500 663123 1450S - Pegboard Only 4.900
663522 1502 / 3 565 395 365 19.200 663352 1450S - With Accessories (Tools Not Included) 5.200
Accessories 1 x PA-H3 Tool Rack: 17-Pin 10 x PA-H1 Hook: 1-Pin
117
Pegboard Accessories
› The following accessories are for the 1401, 1401L, 1404 and 1450S
A B C
D E F G
Code No. Code No.

664111 PA-H1 Hook: 1-Pin, 10-Piece A 664065 PA-T4 Screwdriver Rack - Holds 11 Screwdrivers G
664014 PA-H2 Tool Rack: 6-Pin B 664138 PA- Starter Pack
664022 PA-H3 Tool Rack: 17-Pin C
10 x PA-H1 Hook: 1-Pin
664030 PA-T1 Small Storage Tray D 1 x PA-H3 Tool Rack: 17-Pin
Contents
664049 PA-T2 Large Storage Tray E 1 x PA-T4 Screwdriver Rack - Holds 11 Screwdrivers
664057 PA-T3 Double Storage Tray F 1 x PA-T3 Double Storage Tray
Tool Chests / Assortments
1425 / 3 b
d
TOOL CHEST / ASSORTMENT
› Four-compartment sheetmetal tool chest.

› Lockable.
› Three easy-slide drawers, incorporating full extension ball bearing slide mechanisms.
› Drawer latch incorporated into each drawer.
› Retractable spring-loaded handles.
› Load capacity per drawer 35kg.
› High-density foam inserts.
› L=687 x W=400 x H=362mm.
Code No. 0
660963 1425 / 3 Tool Chest - EMPTY 35.500
Code No. Tool Chest 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/SP Foam Insert 0
660967 1425 / 3 1425 / 3 1B 6-24 Spanners (18) C19 8-32 Sockets (24) ITX19 T20-T50 Sockets (7) 2150 8 (Mechanic’s S/D) 8132/200 Telephone Pliers 43.500
Workshop - 60CP-250 Shifting Spanner No.50/20.8 Spark Plug SKT No.20 4-13 Sockets (11) 2150 6.5 (Mechanic’s S/D) 8250/200 Combination Pliers
2150 4-150 (Electrician’s S/D)
With Tools 1987 Sliding T-Bar 2093Z/94 Ratchet + Coupler 2150 6.5-200 (Electrician’s S/D) 8316-200 Side Cutters
IN19 5-19 Sockets (10) 2090/4 Extension 2160 PH1 (Phillips S/D) 137/250 Vice Grip
TX19 E10-24 Sockets (8) 2098 Driving Handle 2160 PH2 (Phillips S/D) 145/250 Universal Pliers
1990/75mm Extension 1993-U10T Rev. Ratchet 2160 PH3 (Phillips S/D) 43TX/09 TORX® Allen Key Set
1990/125mm Extension 1997/375mm Swivel Handle 42/88M Allen Key Set
1990/250mm Extension 1995 Universal Joint
118
1425 / 5 b
d
TOOL CHEST / ASSORTMENT
› Six-compartment sheetmetal tool chest.

› Lockable.
› Five easy-slide drawers, incorporating full extension ball bearing slide mechanisms.
› Can be stacked on 1525 tool trolley.
› High-density foam inserts.
› L=687 x W=400 x H=491mm.
Code No. 0
660965 1425 / 5 Tool Chest - EMPTY 35.500
Code No. Tool Cabinet 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/PL Foam Insert 1425/27/SD Foam Insert 1425/27/HM Foam Insert 0
660969 1425 / 5 1425 / 5 1B 6-24 Spanners (18) C19 8-32 Sockets (24) 8000/A21 Circlip Pliers 2150 4-150 6.5 6.5-200 8 403 Hacksaw 59.500
Comprehensive - 60CP-250 Shifting Spanner 50/20.8 Spark Plug SKT 8000/J21 Circlip Pliers 2153 5.5 9000.00 Digital Vernier
2160 PH1 PH2 PH3
With Tools 1987 Sliding T-Bar 8000/A2 Circlip Pliers 2161 PH2 702/21M Feeler -
IN19 5-19 Sockets (10) 8000/J2 Circlip Pliers No.400 8 x 10 Flare Nut Spanner Gauge Set
TX19 E10-24 Sockets (8) 137/250 Vice Grip No.400 11 x 13 Flare Nut Spanner 9100 Utility Knife
1990/75mm Extension 145/250 Universal Pliers No.400 12 x 14 Flare Nut Spanner 9534.05 Tape Measure
1990/125mm Extension 8132/200 JC Telephone Pliers No.400 17 x 19 Flare Nut Spanner 248ST/40 Recoil Free
1990/250mm Extension 8250/200 JC Combination Pliers No.400 22 x 24 Flare Nut Spanner Hammer
ITX19 T20-T50 Sockets (7) 8316-200 JC Side Cutters 26R Tubular Box Spanners - 8x9 10x11 8601/500g Hammer
No.20 4-13 Sockets (11) 42/88M Allen Key Set 12x13 14x15 106 Chisel & Punch Set
2093Z/94 Ratchet + Coupler 43TX/09 TORX® Allen Key Set 26RS/2 Stepped Tommy Bar (6-Piece)
2090/4 Extension 95/200 Flat Chisel
2098 Driving Handle
1993-U10T Rev. Ratchet
1997/375mm Swivel Handle
1410
ARTISAN‘S TOOL CHEST
› Four-drawer sheetmetal tool chest.
› Lockable.
› Strong structure, full extension ball bearing slides.
› Rubber anti-slip mats in each drawer.
› Can be stacked on 1510 tool trolley and other 1410 tool chests.
› L=574 x W=417 x H=384mm.
Code No. 0
660817 1410 23.000
119
Tool Trolleys / Assortments
1510 d
TOOL TROLLEY / ASSORTMENT

› Rigid sheetmetal structure.
› Five standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms.
› Central drawer locking mechanism.
› Two swivel castors (one with safety brake) for maximum mobility and safety.
› Handle for easy manoeuvrability.
› Load capacity of 300kg.
› Blue and grey powder coated.
› L=651 x W=585 x H=877mm.
Code No. 0
662792 1510 Trolley - EMPTY 48.000
*WHILE STOCKS LAST
Code No. 1B Spanners Allen Keys Screwdrivers Trolley / Inserts / Tray C19 Sockets Accessories 0
661310 1510 * 6 7 8 9 10 11 12 13 14 42-88M 2 2,5 3 2150 1510 Tool Trolley C19 8-5/16 10-3/8 11 12 36/1 Oil Filter Strap Wrench 60.000
Classic - 15 16 17 18 19 20 21 22 4 5 6 8 10 3-150 1281/82-1B62 Insert 13-1/2 14 15-19/32 16- 62/250 Adjustable Wrench
With Tools 4 1280/81-D19/IN19 Insert 5/8 17 18-11/16 19-3/4 143/250 Universal Pliers
4-150 1280/81-D19 Acc/Skt Insert 21-13/16 22 24-15/16 50/20.8 Spark Plug Socket
IN19 5 6 8 10
5.5 1282-SD-PH-STB Insert 26-1. 27-1.1/16 29-1.1/8 137/250 Grip Pliers
12 14
6.5 1282-SD-MEC-EL Insert 30-1.3/16 32-1.1/4 7/16AF 1987 Sliding T-Bar
8 1280/81-PL/137/36 Insert 9/16AF 7/8AF 1990-75 Extension
2153 1581 Filler 1990-125 Extension
2160 1993U-10T Rev. Ratchet
PH2 8000-A2 Circlip Pliers
2161 8000-J2 Circlip Pliers
PH2 8250-200 JC Combination Pliers
1410
1410 + 1510
CONCEPT
1510
120
d
1525

› Rigid sheetmetal structure.
› Five standard and two deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms.
› L=758 x W=602 x H=914mm.
Code No. 0
662794 1525 Tool Trolley - EMPTY 55.000
Code No. Tool Trolley 1425/41/1B Foam Insert 1425/41/D19 Foam Insert 1425/27/PL Foam Insert 1425/27/SD Foam Insert 1425/27/HM Foam Insert 0
661325 1525 1525 1B 6-24 Spanners (18) C19 8-32 Sockets (24) 8000/A21 Circlip Pliers 2150 4-150 6.5 6.5-200 8 403 Hacksaw 84.400
Comprehesive - 60CP-250 Shifting No.50/20.8 Spark Plug SKT 8000/J21 Circlip Pliers 2153 5.5 9000.00 Digital Vernier
2160 PH1 PH2 PH3
With Tools Spanner 1987 Sliding T-Bar 8000/A2 Circlip Pliers 2161 PH2 No.702/21M Feeler-
IN19 5-19 Sockets (10) 8000/J2 Circlip Pliers 400 8 x 10 Flare Nut Spanner Gauge Set
TX19 E10-24 Sockets (8) 137/250 Vice Grip 400 11 x 13 Flare Nut Spanner 9100.00 Utility Knife
1990/75mm Extension 145/250 Universal Pliers 400 12 x 14 Flare Nut Spanner 9534.05 Tape Measure
1990/125mm Extension 8132/200JC Telephone Pliers 400 17 x 19 Flare Nut Spanner 248ST/40 Recoil Free-
1990/250mm Extension 8250/200JC Combination Pliers 400 22 x 24 Flare Nut Spanner Hammer
ITX19 T20-T50 Sockets (7) 8316-200 JC Side Cutters 26R Tubular Box Spanners - 8x9 10x11 8601/500g Ball Pein-
No.20 4-13 Sockets (11) 42/88M Allen Key Set 12x13 14x15 Hammer
2093Z/94 Rev. Ratchet 43TX/09 TORX® Allen Key Set 26RS/2 Stepped Tommy Bar 106 Chisel & Punch-
2098 Driving Handle Set (6-Piece)
1993-U10T Rev. Ratchet 95/200 Flat Chisel
1997/375mm
1425
1425 + 1525
CONCEPT
1525
121
1581 d

› Rigid sheetmetal structure with pegboard back.
› Six standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms.
› Working platform with three compartments for small parts. Raised edges.
› L=635 x W=495 x H=932mm.
Code No. 0
662801 1581 Trolley - EMPTY 56.000
Code No. 1B Spanners Allen Keys Screwdrivers Trolley / Inserts / Tray C19 Sockets Accessories 0
661306 1581 6 7 8 9 10 11 12 13 42-88M 2 2,5 3 2150 1581 Tool Trolley C19 8-5/16 10-3/8 11 12 13-1/2 36/1 Oil Filter Strap Wrench 68.000
Classic - 14 15 16 17 18 19 4 5 6 8 10 3-150 1281/82-1B/62 Insert 14 15-19/32 16-5/8 17 18-11/16 62/250 Adjustable Wrench
With Tools 20 21 22 4 1280/81-D19/IN19 Insert 19-3/4 21-13/16 22 24-15/16 143/250 Universal Pliers
IN19 5 6 8 10 4-150 1280/81-D19 Acc/Skt Insert 26-1. 27-1.1/16 29-1.1/8 30- 50/20.8 Spark Plug Socket
12 14 5.5 1282-SD-PH-STB Insert 1.3/16 32-1.1/4 7/16AF 9/16AF 137/250 Grip Pliers
6.5 1282-SD-MEC-EL Insert 7/8AF 1987 Sliding T-Bar
8 1280/81-PL/137/36 Insert 1990-75 Extension
2153 1581 Filler Insert 1990-125 Extension
2160 1993U-10T Rev. Ratchet
PH2 8000-A2 Circlip Pliers
2161 8000-J2 Circlip Pliers
PH2 8250-200 JC Combination Pliers
Modular Assortments
› All assortments are packed in a high-density foam insert that will fit into an appropriate compartment of the 1425 / 3, 1425 / 5 Tool Chest and 1525 Comprehensive Kit.
1425 / 41 / D19 1425 / 41 / 1B

663023 1425/41/D19 7.820 663024 1425/41/1B 3.210
Contents C19 8-32 Sockets (24) 2098 Driving Handle 50/20.8 Spark Plug SKT Contents 1B 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24
1987 Sliding T-Bar 1993-U10T Rev. Ratchet IN19 5-19 Sockets (10) 1425/41/1B Foam Insert
1990/75mm Extension 1997/375mm Swivel Handle TX19 E10-24 Sockets (8)
1990/125mm Extension 2090/4 Extension ITX19 T20-50 Sockets (7) 60CP-250 Shifting Spanner
1990/250mm Extension 2093Z-94 Ratchet + Coupler No.20 4-13 Sockets (11)
1995 Universal Joint 1425/41/D19 Foam Insert
122
1425 / 27 / SP 1425 / 27 / PL

663037 1425/27/SP 3.170 663025 1425/27/PL 3.250
Contents 2150 4-150 (Electrician’s) 2160 PH1 (Phillips) 8132/200 Telephone Pliers Contents 8000/A21 Circlip Pliers 137/250 Vice Grip 8250/200JC Combination Pliers
2150 6.5-200 (Electrician’s) 2160 PH2(Phillips) 8250/200 Combination Pliers 8000/J21 Circlip Pliers 145/250 Universal Pliers 8316-200 JC Side Cutters
2150 6.5 (Mechanic’s) 2160 PH3 (Phillips) 8316-200 JC Side Cutters 8000/A2 Circlip Pliers 1425/27/PL Foam Insert 42/88M Allen Key Set
2150 8 (Mechanic’s) 42/88M Allen Key Set 137/250 Vice Grip 8000/J2 Circlip Pliers 8132/200JC Telephone Pliers 43TX/09 TORX® Allen Key Set
145/250 Universal Pliers 1425/27/SP Foam Insert 43TX/09 TORX® Allen Key Set
1425 / 27 / HM 1425 / 27 / SD

663036 1425/27/HM 4.070 663035 1425/27/SD 2.150
Contents 403 Hacksaw 9000.00 Digital Vernier 248ST/40 Recoil Free Hammer Contents 2150 4-150 6.5 6.5-200 8 No.400 8 x 10 Flare Nut Spanner
106 Chisel & Punch Set 8601/500g Ball Pein Hammer No.702/21M Feeler Gauge Set 2153 5.5 No.400 11 x 13 Flare Nut Spanner
9534.05 Tape Measure 9100.00 Utility Knife 95/200 Flat Chisel 2160 PH1 PH2 PH3 No.400 12 x 14 Flare Nut Spanner
1425/27/HM Foam Insert 2161 PH2 No.400 17 x 19 Flare Nut Spanner
26RS-2 Stepped Tommy Bar No.400 22 x 24 Flare Nut Spanner
1425/27/SD Foam Insert 26R - 8x9 10x11 12x13 14x15
ARTISAN‘S TOOLKITS 2 04
1425 / 3 / 5
SPARES
› Foam inserts are not covered by the GEDORE guarantee and may be subject to degradation as well as
wear and tear. Replacement foam inserts can therefore be purchased separately.
Code No.
562860 1425 / 41 / D19
562865 1425 / 41 / 1B
562870 1425 / 27 / PL
562875 1425 / 27 / SD
562880 1425 / 27 / HM
562885 1425 / 27 / SP
123
Modular Assortments
› Toolbox, Tool Cabinet, Tool Trolley and Modular Assortments.
REF A-C19/22/ACC REF C-1B
Code No. / Insert Sockets Accessories 0 Code No. / Insert/Tray 1B Spanners Accessories 0
662208 REF A-C19/22/ACC C19 7/16AF 50/20.8 Spark Plug Socket 2.370 662224 REF C-1B 6 7 8 9 10 11 12 137/250 Grip Pliers 4.100
Insert 9/16AF 7/8AF 1990-75 Extension Insert 13 14 15 16 17 18 145/250 Universal Pliers
1280/81-22-ACC 1990-125 Extension 1280/81-1B 19 20 21 22 42/88M Allen Key Set
1990-250 Extension Metal Tray
1997/375 Power Bar 1280/81
1987 Sliding T-Bar
REF B-C19 REF SF-1B/145
Code No. / Insert Sockets Accessories 0 Code No. / Insert/Tray 1B Spanners Accessories 0
662216 REF B-C19 C19 8-5/16 10-3/8 11 12 1993U-10T Rev. Ratchet 2.710 663087 REF SF-1B/145 6 7 8 9 10 11 12 137/250 Grip Pliers 3.960
Insert 13-1/2 14 15-19/32 16-5/8 Insert 13 14 15 16 17 18 145/250 Universal Pliers
1280/81-D19 17 18-11/16 19-3/4 21-13/16 1280/81-1B 19 20 21 22 42/88M Allen Key Set
22 24-15/16 26-1. 27-1.1/16 Metal Tray
29-1.1/8 30-1.3/16 32-1.1/4 1282
REF RF-C19/Z94 REF D-C19/IN19
Code No. / Insert Sockets Accessories 0 Code No. / Insert Sockets Allen Key Sockets 0
663086 REF RF-C19/Z94 C19 8-5/16 10-3/8 11 12 1993 Z-94 Ratchet + 2.330 662232 REF D-C19/IN19 C19 8-5/16 10-3/8 11 12 13-1/2 IN19 5 6 8 10 2.670
13-1/2 14 15-19/32 16-5/8 Coupler Insert 14 15-19/32 16-5/8 17 18-11/16 12 14
17 18-11/16 19-3/4 21-13/16 1280/81-D19/IN19 19-3/4 21-13/16 22 24-15/16
22 24-15/16 26-1. 27-1.1/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16
29-1.1/8 30-1.3/16 32-1.1/4 32-1.1/4
124
REF E-1B/62 REF H-D19/22/ACC
Code No. / Insert 1B Spanners Accessories 0 Code No. / Insert Sockets Accessories 0
662240 REF E-1B/62 6 7 8 9 10 62/250 Adjustable Wrench 4.120 662275 REF H-D19/22/ACC D19 9 18 20 50/20.8 Spark Plug Socket 2.360
Insert 11 12 13 14 143/250 Universal Pliers Insert 1987 Sliding T-Bar
1281/82-1B/62 15 16 17 18 42/88M Allen Key Set 1280/81-22-ACC 1990-75 Extension
Metal Tray 19 20 21 22 1990-125 Extension
1280/81 1990-250 Extension
1997/375 Power Bar
REF F-D19/ACC/SKT REF I-D19
Code No. / Insert Sockets Accessories 0 Code No. / Insert Sockets Accessories 0
662259 REF F-D19/ACC/SKT D19 7/16AF 50/20.8 Spark Plug SKT 2.180 662283 REF I-D19 D19 8 10 11 12 1993U-10T Rev. Ratchet 2.360
Insert 9/16AF 7/8AF 1987 Sliding T-Bar Insert 13 14 15 16 17
1280/81-D19 ACC/SKT 1990-75 Extension 1280/81-D19 19 21 22 24 26
1990-125 Extension 27 28 29 30 32
1990-250 Extension
REF G-C32/6 REF J-D19/IN19
Code No. / Insert Sockets Accessories 0 Code No. / Insert Sockets Allen Key Sockets 0
662267 REF G-C32/6 C32 1.3/8AF 36-1.7/16 3287/447 Sliding T-Bar 8.700 662291 REF J-D19/IN19 D19 8 10 11 12 13 IN19 5 6 8 10 12 14 2.720
Insert 38-1.1/2 41-1.5/8 3290-200 Extension Insert 14 15 16 17 18 19
1280/81-D32/6 46-1.13/16 50-2. 3290-400 Extension 1280/81-D19/IN19 21 22 24 26 27 29
3293U-1/440 Rev. Ratchet 30 32
125
REF K-D32/6 REF-10SD
Code No. / Insert Sockets Accessories 0 Code Description 2150 2153 2160 2161 0
662321 REF K-D32/6 D32 1.3/8AF 36 38 3287/447 Sliding T-Bar 8.710 662348 10SD 4 5.5 6.5 8 5.5 PH1 PH2 PH2 1.830
Insert 41 46 50 3290-200 Extension 3-150 4-150
1280/81-D32/6 3290-400 Extension
3293U-1/440 Rev. Ratchet
REF L-PL/137/36 REF N-10
Code No. / Insert Pliers/Circlip Pliers Accessories 0 Code Insert 2150 2153 2160 2161 0
662356 REF L-PL/137/36 Pliers 36/1 Strap Wrench 2.390 662968 1282-2161 ELS+PH 4 5.5 6.5 8 5.5 PH1 PH2 PH2 2.100
Insert 8132/200 JC Telephone Pliers 137/250 Grip Pliers 1282-2150 MEC 3-150 4-150
1280/81- 8250/200 JC Universal Pliers
PL137/36 8316/200 JC Side Cutters
Circlip Pliers
8000-A2
8000-J2
REF M/MF-PL/81/82/83 REF WF/VF
Code No. / Insert Pliers 0 Code Inserts 2150 2160 2161 2153 0
662941 REF M-PL/81/82/83 Ass. 8132/200 JC Telephone Pliers 2.700 663092 REF WF-2153 4 5.5 6.5 8 5.5 0.580
663082 REF MF-PL/81/82/83 Ass. 8250/200 JC Universal Pliers 2.010 663091 REF VF-2161 3-150 4-150 PH1 PH2 PH2 0.450
Insert 8316/200 JC Side Cutters
1282-Pliers
126
REF 0-6SD REF PF-4 EXT T-BAR
Code No. 2150 2160 0 Code No. / Insert Accessories 0

663018 REFO-6SD 4 PH1 1.780 663084 REF PF-4 Ext – T-bar Ass 1990-75 Extension 1.080
Insert 5.5 PH2 Insert 1990-125 Extension
1282-6SD 3C 6.5 Foam 1990-250 Extension
8 1987 Sliding T-Bar
REF OF REF Q-4
Code No. 2150 2160 0 Code No. / Insert Accessories 0

663083 REF OF-6SD 4 PH1 0.730 663022 REF Q-4 ACC – Power Bar Ass. 1990-75 Extension 1.300
Insert 5.5 PH2 Insert 1990-250 Extension
REF OA-2150-6SD 6.5 1282-4 ACC. 1995 Universal Joint
Foam Insert 8 1997-375 Swivel Handle
REF P-4 EXT T-BAR REF QF-4
Code No. / Insert Accessories 0 Code No. / Insert Accessories 0

663020 REF P-4 Ext – T-bar Ass 1990-75 Extension 1.100 663085 REF QF-4 ACC – Power Bar Ass. 1990-75 Extension 1.300
Insert 1990-125 Extension Insert 1990-250 Extension
1282 EXT 1990-250 Extension Ref Q 1997 1995 Universal Joint
1987 Sliding T-Bar 1997-375 Swivel Handle
127
STRIKING
TOOLS
128 - 133
128
HAMMERS, CHISELS, PUNCHES
SETS
RECOIL FREE HAMMERS BALL PEIN HAMMERS CHISELS

130 130 130
HAND GUARD CENTRE PUNCHES CHISEL & PUNCH SET

130 130 131
PUNCH SETS PUNCH NUMBER/LETTER SET SLEDGE HAMMERS

131 131 133
HAMMERS / STRIKING TOOLS
Hammers / Striking Tools
NEW
248 ST 8601
RECOIL-FREE HAMMERS BALL PEIN HAMMERS
› Splinter-proof, shatter-proof and wear- › Drop forged.
resistant polymide heads. › Striking faces induction hardened
› Powder coated with silver hammer-effect enamel. and precision ground
› Robust and durable steel tube handle. › Blue epoxy powder coated.
› In accordance with SANS 387.
Code No. y 0 › Hardwood handles.
8828950 248 ST 30mm 295 0.600
Code No. y 0
8829170 248 ST 40mm 305 0.800
8829250 248 ST 50mm 315 1.005 676381 8601 / 100 280 0.160
8829330 248 ST 60mm 340 1.800 676403 8601 / 200 310 0.320
8830260 E 248 / 30 Replacement Head (1 Piece) 0.015 676411 8601 / 300 325 0.420
676527 8601 / 1100 410 1.240
95 96
FLAT COLD CHISELS CROSS-CUT CHISELS
› Made from Chrome Molybdenum Vanadium air hardened › Made from Chrome Molybdenum Vanadium air hardened
45CrMoV7 steel, in accordance with DIN 6453. 45CrMoV7 steel, in accordance with DIN 6451.
› Carefully hardened and tempered › Carefully hardened and tempered along the
along the full length. full length.
› Striking head induction tempered to › Striking head induction tempered to prevent shattering.
prevent shattering. › Working edge polished and clear varnished, free of burrs.
› Working edge polished and clear varnished, free of burrs.
Code No. Tip y 0 Code No. y 0

8698640 95 - 125 15mm 125 0.125 8702180 96 - 125 125 0.140
8698720 95 - 150 18mm 150 0.225 8702260 96 - 150 150 0.220
8698800 95 - 175 21mm 175 0.270 8702340 96 - 175 175 0.270
8698990 95 - 200 24mm 200 0.270 8702420 96 - 200 200 0.380
8699100 95 - 250 28mm 250 0.480 8702500 96 - 250 250 0.535
8699370 95 - 300 30mm 300 0.700 8702770 96 - HS-250 with guard 250 0.695
8700640 95 HS-300 with guard 30mm 300 0.860
108 100
UNI HAND GUARD CENTRE PUNCHES
› Made from PVC. › Made from Chrome Molybdenum Vanadium
› Ergonomic design. air hardened 45CrMoV7 steel, in accordance
› Rectangular shape ensures no rolling away. with DIN 7250.
› Optimum hold – avoids hand fatigue and injuries. › Hardened and tempered along the full length.
› For use with 95, 2095 and 2096 chisels. › Striking head induction tempered to prevent
shattering.
› Working edge polished and clear varnished.
Code No. Tip y 0

8721050 100 - 10 4mm 120 0.060
8721130 100 - 12 5mm 120 0.095
Code No. 0 8721210 100 - 15 5mm 150 0.120
8658500 108 UNI 0.160 8721480 100 - 16 8mm 150 0.240
130
99 106
DRIFT PUNCHES CHISEL & PUNCH SET
› Made from Chrome Molybdenum Vanadium air hardened
6 pieces
45CrMoV7 steel, in accordance with DIN 6458.
› Hardened and tempered along the full length.
› Striking head induction tempered to prevent › Made from Chrome Molybdenum Vanadium air
shattering. hardened 45CrMoV7 steel.
› Working edge polished and clear varnished. › Hardened and tempered along the full length.
› Striking head induction tempered to prevent
shattering.
› Working edge polished and clear varnished.
› Comes in a PVC stand.
Code No. y 0
8708700 99 10-1 120 0.060
8708970 99 10-2 120 0.060
8709190 99 10-3 120 0.060
8711170 99 12-4 120 0.090
8711330 99 12-5 120 0.090
8711410 99 12-6 120 0.090 Code No. Contents 0
8711680 99 12-7 120 0.100 97 - 125 97 - 150 98 - 125 99 - 12-3
8725200 106 0.550
8711760 99 12-8 120 0.105 100 - 10 119 - 4
113 116
DRIFT PUNCH SET PIN PUNCH SET
6 pieces 6 pieces
› Made from Chrome Molybdenum Vanadium air › Made from Chrome Molybdenum Vanadium air
hardened 45CrMoV7 steel. hardened 45CrMoV7 steel.
› Hardened and tempered along the full length. › Hardened and tempered along the full length.
› Striking head induction tempered to prevent › Striking head induction tempered to prevent
shattering. shattering.
› Working edge polished and clear varnished. › Working edge polished and clear varnished.
› Comes in a PVC stand. › Comes in a PVC stand.

99 - 10-1 99 - 10-2 99 - 10-3 119 - 3 119 - 4 119 - 5 119 - 6
8753680 113 0.450 8757670 116 A 0.510
99 - 12-4 99 - 12-5 100 - 10 119 - 7 119 -8
2200 2201
NUMBER SET LETTER SET
› 6mm print height. 9 numbers. › 6mm print height. 27 letters.
› To label finished parts such as signs, tools etc. › To label finished parts such as signs, tools etc.
› In blue plastic box. › In blue plastic box.
› Made from hardened steel, with hardened handle and › Made from hardened steel, with hardened handle and
tempered striking head to prevent shattering. tempered striking head to prevent shattering.

8605140 2200 - 6 0.300 8605220 2201 - 6 1.30
131
HAMMERS / STRIKING TOOLS
SLEDGE HAMMER
Developed in 1975 to withstand the rigorous hard rock mining conditions with hard hitting power
that delivers more than 36 000 strikes smoothly and efficiently.
Locked-in lanyard hole

Totally safe attachment.
Forged head
Superior grain structure. Ergonomic shape
Striking faces hardened to 50-58HRC. Handle is shaped to provide a
comfortable and safe grip.
Thickened boss High tensile steel rods

Further protects the hammer from High strength rubber-to-metal
overstrikes. bonding makes the handle
extremely strong.
Impact absorbing handle
Heavy duty rubber cushions
impact, thereby reducing
Non-slip grip
fatigue and injury.
Secure grip in both wet and dry conditions.
Positive locking plate
Head will not seperate from the handle.
Sledge / Club Hammers
620C
CLUB HAMMERS
› Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring outstanding durability.
› Locking plate design ensures head will not seperate from the handle.
› The abrasive-resistant rubber is injected all the way into the eye of the hammer head.
› Superior quality rubber handle provides excellent grip in wet and dry conditions allowing for versatility and safety.
› Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Specifications.
Applications: Mining, Construction, Steelwork, Fencing, Electrical Engineering, Chiseling and Chasing, Surveying
Code No. y 0
676530 620C Club Hammer 250 1.10
676531 620C Club Hammer 250 1.80
132
640S 622C
SLEDGE HAMMERS COPPER SLEDGE HAMMERS
› Handle core contains high tensile steel rods moulded in abrasive-resistant rubber ensuring › Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring
outstanding durability. outstanding durability.
› Locking plate design ensures head will not seperate from the handle. › Superior quality rubber handle provides excellent grip in wet and dry conditions
› The abrasive-resistant rubber is injected all the way into the eye of the hammer head. allowing for versatility and safety.
› Superior quality rubber handle provides excellent grip in wet and dry conditions › Head 99.98% copper reduces damage to workpieces and reduces chance of sparking
allowing for versatility and safety. in hazardous areas.
› Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Specifications.
Applications: Mining, Petrochemical, Engineering, Toolmaking
Applications: Mining, Building & Construction, Demolition, Heavy Industry,
Military, Emergency Serrvices.

676532 640S Steel Sledge Hammer 535 3.60 676534 622C Copper Sledge Hammer 250 1.80
676533 640S Steel Sledge Hammer 710 6.30 676536 622C Copper Sledge Hammer 535 3.60
676538 622C Copper Sledge Hammer 710 6.30
NEW
650C
CLUB HAMMERS
› Fine grain high alloy steel/carbon steel.
› Drop forged.
› Heat treated and induction hardened.
› Highly polished head.
› Fiber glass handle.
› Comfortable shock absorbant vinyl grip.
› 50-58HRC.
Close up
Code No. y 0
6765392 650C Club Hammer 260 1.100
6765390 650C Club Hammer 275 1.800
133
VDE INSULATED
SAFETY TOOLS
134 - 141
134
VDE INSULATED
SAFETY TOOLS
SPANNERS NUT DRIVERS NUT DRIVER SET

136 136 136
TORQUE WRENCH SCREWDRIVERS PLIERS / SIDE CUTTERS

137 137 138
CABLE SHEARS VOLTAGE TESTER TOOLSETS

140 140 140
INSULATED SAFETY TOOLS
VDE 2 E VDE 894

VDE SINGLE ENDED VDE SINGLE OPEN ENDED
RING SPANNERS SPANNERS
deep offset
› Gedore Vanadium steel 31CrV3. › Gedore Vanadium steel 31CrV3.

› VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation.
› Jaw set at 15 °.
VDE 2 E 19 VDE 894 12
VDE 2 E 13 VDE 894 22

*WHILE STOCKS LAST / INDENT ONLY *WHILE STOCKS LAST / INDENT ONLY
Code No. y 3 0 Code No. y 3 0

6036000 VDE 2 E10mm * 170 10 0.097 6572120 VDE 894 10mm * 105 10 0.034
6036190 VDE 2 E11mm * 180 11 0.093 6572200 VDE 894 11mm * 115 11 0.044
6036350 VDE 2 E13mm * 190 13 0.130 6572470 VDE 894 13mm * 135 13 0.067
6036430 VDE 2 E14mm * 210 14 0.151 6572550 VDE 894 14mm * 145 14 0.081
6036780 VDE 2 E17mm * 220 17 0.199 6572980 VDE 894 17mm * 160 17 0.117
6036860 VDE 2 E19mm * 240 19 0.244 6573010 VDE 894 19mm * 175 19 0.161
6037320 VDE 2 E32mm * 330 32 0.683 6574920 VDE 894 32mm * 280 32 0.558
iO iO
VDE 2133 ö 1000 V VDE 2133 ö 1000 V
NUT DRIVERS NUT DRIVER SET

with 3C handle 10 pieces
› 3-component handles Power-Grip3 with hanging hole.

› Ergonomic handle design.
› Head depth 25mm, blade length 125mm.
› VDE insulation up to 1000 V, according to EN 60900/IEC 60900.
Code No. N 1 Head Ø 0 Code No. Contents 0

1747045 VDE 2133 3 225 3 9 0.109 2133 5,0 6,0 7,0 8,0 9,0 10,0 11,0
1747053 VDE 2133 4 225 4 10 0.111 1747260 VDE 2133 / 10 1.30
12,0 13,0 14,0
1747061 VDE 2133 5 225 5 11 0.112
1747088 VDE 2133 6 225 6 12 0.114
1747096 VDE 2133 7 235 7 14 0.152 › Only tools bearing these test symbols are
1747118 VDE 2133 8 235 8 15 0.154
classed as insulated tools.
1747126 VDE 2133 9 235 9 16 0.154
1747134 VDE 2133 10 245 10 17 0.161 › VDE insulation as per standard EN60900,
1747142 VDE 2133 11 245 11 19 0.193 IEC/CEI900, VDE0680.
1747150 VDE 2133 12 245 12 20 0.196 › Safe working in high-voltage areas.
1747169 VDE 2133 13 245 13 21 0.199
› Up to 1000V alternating current.
1747177 VDE 2133 14 245 14 22 0.198
1747185 VDE 2133 17 245 17 26 0.222 › Up to 1500V direct current.
136
ö 1000 V
VDE 4507
TORQUE WRENCH 1/2"
5-50 Nm / 4-37 lbf·ft
› Controlled screw tightening in the most common range of 5 - 50Nm / 4 - 37

lbf·ft.
› Automatic short-path actuation with tactile impulse and audible signal.
› Dual scale with a scale graduation of 5Nm and 5lbf·ft.
› Fine toothed ratchet with square drive as per DIN 3120 - A 12.5, ISO 1174.
› VDE insulation up to 1000V, according to EN 60900/IEC 60900, two-ply
Check-Tool insulation.
*WHILE STOCKS LAST
Code No. a„ a y 0
6681920 VDE 4507-4 * 1/2 12.5 370 1.251
iO iO
VDE 2160 PH ö 1000 V VDE 2170 ö 1000 V
PHILLIPS SCREWDRIVERS ELECTRICIAN‘S SCREWDRIVERS

for cross-head screws PH for slotted head screws
› Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade › Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
› Blade tip to DIN ISO 8764-1 PH › Tip to DIN ISO 2380-1 form B
› 3-component handles Power-Grip3 with hanging hole › 3-component handles Power-Grip3 with hanging hole
› Ergonomic handle design enables precise and fatigue-free working › Ergonomic handle design enables precise and fatigue-free working
› Positive-fit joint of handle and blade for optimum transmission of force › Positive-fit joint of handle and blade for optimum transmission of force
› Type of drive marked at end of the handle › Type of drive marked at end of the handle
› Blade from GEDORE molybdenum-vanadium-Plus tempered steel › Blade from GEDORE molybdenum-vanadium-Plus tempered steel
Code No. + ; N 0 Code No. ?K N 0

1612115 VDE 2160 PH1 M2 - M3 1 180 0.082 1612220 VDE 2170 2,5 2.5 160 0.038
1612123 VDE 2160 PH2 M3,5 - M5 2 210 0.119 1612247 VDE 2170 3,5 3.5 185 0.055
1612131 VDE 2160 PH3 M5,5 - M7 3 270 0.188 1612255 VDE 2170 4 4.0 185 0.058
1612271 VDE 2170 5,5 5.5 225 0.095
1612298 VDE 2170 6,5 6.5 260 0.134
VDE 2160-2170
SCREWDRIVER SET
6 pieces
Code No. Contents 0

1616048 VDE 2170-2160 PH 06 ? VDE 2170 3.5 4 5.5 6.5 0.660
; VDE 2160 PH1 PH2
137
R P
VDE 8250 H iO VDE 8316 H iO
ö 1000 V ö 1000 V
VDE HEAVY DUTY VDE POWER
COMBINATION PLIERS SIDE CUTTERS
with VDE insulating sleeves with VDE insulating sleeves
› For consistent use under tough working conditions. › For hard wires.
› To cut all wire types including piano wire. › Oil hardened, chrome plated.
› Good lever action for easy cutting. › Cutting edges inductively rehardened, approximately 64HRC.
› In heat treated steel as per DIN EN 10083. › Handles with VDE dipped insulation as per DIN EN 60900.
› Oil hardened, chrome plated.
› Cutting edges inductively rehardened, approximately 64HRC.
› Handles with VDE dipped insulation as per DIN EN 60900.

1550942 VDE 8250-160 H 160 0.228 1551000 VDE 8316 - 200 H 200 0.350
1550950 VDE 8250-180 H 180 0.288
1550969 VDE 8250-200 H 200 0.369
VDE 8314 H P VDE 8098 H iO

ö 1000 V
VDE SIDE CUTTERS iO VDE STRIPPING PLIERS
ö 1000 V
› With slender head - ideal for confined spaces. › Opening stop, spring and brass adjusting screw.
› For medium-hard wire, 1.6 mm. › For cables 0.8 - 6.0 mm2.
› Cutting edges inductively rehardened, approximately 64HRC. › GEDORE special hardened and tempered steel, chrome-plated.
› Oil hardened, chrome plated. › Handles with VDE insulation as per DIN EN 60900.
› GEDORE special hardened and tempered steel, chrome plated.
› Handles with VDE dipped insulation as per DIN EN 60900.
Code No. Ø y 0 Code No. y 0

1552155 VDE 8314-140 H 1.6 140 0.177 1552074 VDE 8098-160 H 160 0.204
1552163 VDE 8314-160 H 1.6 160 0.231
VDE 8132 H T
iO
VDE TELEPHONE PLIERS ö 1000 V
with VDE insulating sleeves, straight pattern
› Long, flat jaws and straight gripping surfaces. Code No. y 0

› Face hardness approximately 62HRC. 1552112 VDE 8132 - 160 H 160 0.150
› Handles with VDE insulation as per DIN EN 60900. 1552120 VDE 8132 - 200 H 200 0.210
138
iO R
VDE 8099 H ö 1000 V VDE 8120 H iO
ö 1000 V
VDE STRIPPING PLIERS VDE FLAT NOSE PLIERS
› Self adjusting for wires 0,5-5,0mm2. › Long, flat jaws and serrated gripping surfaces.
› GEDORE special hardened and tempered steel, chrome plated. › GEDORE special hardened and tempered steel, chrome plated.
› Handles with VDE insulation as per DIN EN 60900. › Handles with VDE insulation as per DIN EN 60900.

1552082 VDE 8099-160 H 160 0.170 1552090 VDE 8120 - 160 H 160 0.210
VDE 8122 H S VDE 8132 AB H T

iO iO
VDE ROUND NOSE PLIERS ö 1000 V VDE BENT NOSE ö 1000 V
with VDE insulating sleeves TELEPHONE PLIERS

with VDE insulating sleeves, angled pattern
› Long, round jaws and serrated gripping surfaces.
› GEDORE special hardened and tempered steel, chrome plated. › Long, flat jaws and angled gripping surfaces.
› Handles with VDE insulation as per DIN EN 60900. › Face hardness approximately 62HRC.
› Handles with VDE insulation as per DIN EN 60900.

1552104 VDE 8122 -160 H 160 0.180 1552139 VDE 8132AB-160 H 160 0.150
1552147 VDE 8132AB-200 H 200 0.210
VDE S 8003 H
T
VDE PLIERS SET WITH P
iO
VDE INSULATING SLEEVES ö 1000 V
3 pieces
› Packed in environmentally-friendly cardboard box
› Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900
Code No. Contents 0

1550594 VDE S 8003 H VDE 8132 - 160 H 0.747
VDE 8250 - 180 H
VDE 8314 - 160 H
139
VDE 4522 iO V 180 ö 1000 V

ö 1000 V
CABLE KNIFE CABLE SHEARS
› Strong, straight blade made from hardened and tempered steel. › Cuts cable up to 27mm, solid material up to 200 mm2.
› Tough, resilient plastic handle. › Individually tested, insulation up to 1000V.
› With VDE insulation as per DIN EN 60900.

6690400 VDE 4522 180 0.104 6430330 180-23 620 2.12
VDE 1001 o V 4614 PLUS

d ö 1000 V
VDE TOOLSET ? VOLTAGE TESTER 1000 V
5 two-pole with LED display
iO
› With practical foam insert in sturdy PVC case. ö 1000 V › AC and DC voltages from 12-690V.
› Dimensions: 395 x 295 x 106mm. › Accoustic continuity testing up to 500KOhm.
› Cranked allen socket screwdriver no. 42 is for locking › Single pole phase testing > 100VAC.
the adjusting screw of extension no. VDE 1990 › With VDE insulation as per DIN EN 60900.
no. 42 is not VDE insulated. › Twin-pole with LED display.
› 2x batteries type AAA included.
› Integrated LED torch (white).
› Automatic on/off function.
› Protection classification IP65, dust-proof, hose-proof.
› Safety outlet and CEE one-hand operation.
› Displays polarity in case of direct current (DC).
Code No. Allen Keys Sockets Accessories 0 Code No. 0

6602560 1001 VDE 42 2,5 VDE 19 10 12 13 VDE 1993 U 3.40 2241137 V 4614 0.270
Toolset 14 17 19 22 24 VDE 1990-5 -10
VDE 1989 T
VDE 2170 5,5
VDE 1101-003 T
P
VDE TOOLSET ?
;
in i-BOXX® 72 iO
ö 1000 V
› In Gedore i-BOXX® 72, with transparent cover for easy view of tools.
Code No. Contents 0

1828045 1101-003 VDE 8132-200H VDE 2170 4 5,5 2.00
VDE 8250-180H VDE 2160 PH1 PH2
VDE 8314-160H VDE 4615 3
140
o
ELECTRICIAN‘S TOOLSET d
5
› Double stitched and bound. iO
› Very durable water repellent inner lining. ö 1000 V
› Heavy duty zip.
› Reinforced inners.
Code No. 1B Spanners 42-88M Allen Keys

VDE Screwdrivers
668122 Electrician’s 8 10 13 17 19 2 2,5 3 4 5 6 VDE 2160
Tool Set 8 10 PH1
PH2
PH3
VDE 2170
4
5.5
6.5
VDE Nut Drivers Accessories 0
2133 4 6 Electrician’s Toolcase 145-250 Waterpump Pliers 6.10
8 10 13 VDE 8098-160H Stripping Pliers 9930.000 Torch
VDE 8250-200H Combination Pliers 9534.05 Tape Measure
VDE 8314-160H Side Cutters VDE 4522 Cable Knife
VDE 8132-200H Telephone Pliers Digital Multimeter
137-175 Grip Pliers 8601-300 Ball Pein Hammer
62-250 P10 Shifting Spanner
n
1100-1094 c
iO
VDE TOOL ASSORTMENT HYBRID ö 1000 V
› Perfect range of tools for all vehicle types.

› Comes in Gedore L-BOXX´®
Code No. Contents 0

2979063 1100-1094 VDE 30 6 8 9 10 11 12 13 14 VDE 146 10 8.04
15 16 17 18 19 20 22 VDE 8250-200H
VDE INX 30 8 10 12 VDE 8314-180H
VDE 3090-3 3093-6 VDE 8132 AB-200H
VDE 3093-U VDE 8120-160H
VDE 2170 2,5 3,5 4 5,5 VDE 4522
VDE 2160 PH1 2 3 V914 1 2 3
VDE 2163 TX T20 T25 T30
VDE 8094
141
TORQUE
TOOLS
142 - 177
142
TORQUE TOOLS
TORCOFIX DREMASTER DREMOMETER

146 148 150
TORQUE SLIPPERS TORQUE BREAKERS TORQUE SCREWDRIVERS

156 158 162
CALIBRATION ANALYSERS FITTINGS / RATCHET HEADS MULTIPLIERS

163 165 167
TORQUE TOOLS
OVERVIEW OF GEDORE
TORQUE TOOLS
Operation length Release

Page Series/Type Precision +/- Drive Ratchet Scale independent types
0,4 – 3.000Nm Mechanical Torque Wrenches
155 Dremometer Mini 3% b 1
152 Dremometer 3% b g 1
149 Dremaster DMK 3% d e 1
149 Dremometer DMSE 3% }~ 1
146 Torcofix K 3% b e 1
147 Torcofix SE 3% }~ 1
147 Torcofix FS 3% }~ 1
156 TSN Slipper 4% b d 3
1
158 TBN Breaker 4%, 6% j}
157 TSP Slipper 6% b 3
157 TSC Slipper 6% b 3
161 Typ 83 4% b d
160 Typ 88 4% 2
e
0,04 – 13,6Nm Torque screwdriver
162 TLS Pro 6% i

162 Typ 756 S 6% 3
i
2 – 1.000Nm Electronic torque wrench
160 Torcotronic III 1% d

Torque testers
163 Dremotest E 1% b f
TORCOFIX 146 DREMASTER 148
144
Different Torque Tool Mechanisms
Range Nm
1 Click Tools When the preset torque value is reached the

0 5 10 15 20 40 60 80 100 150 200 300 400 500 750 1000 1500 2000
Overtightening Possible operator will hear a click, feel an impulse and
there will be approximately 3° of tool movement.
Mechanical torque wrench Torque Resetting takes place when the hand pressure is
released. Work can then immediately continue.
2,5 – 12Nm These tools are generally length dependent
(exception DREMOMETER models AM - F), thus
6 – 3.000Nm Preset Torque the position of the hand on the tool alters the
Value
torque produced. Continued application of force
20 – 850Nm after the 3° of movement will cause the torque
applied to increase above the required preset
nt
me
20 – 400Nm
o ve
limit.
°m
x. 3
p ro
1 – 750Nm
ap
Applied Force
5 – 50Nm
2 – 200Nm Overtightening
Possible
3 – 125Nm
5 – 200Nm
1 – 10Nm 2 Breaking Tools When the preset torque value is reached,

Overtightening Unlikely these tools break at a specific point along the
1 – 10Nm tool’s length - usually at a pivot point near the
Torque tool’s head. In most cases the movement is
0.8 – 2000Nm approximately 20°. The tool is automatically
reset by allowing the handle to return to its in
100 – 1500Nm line position. These tools are length dependent,
Preset Torque thus the position of the hand on the tool alters
5 – 125Nm Value
the torque produced. Continued application of
force after 20° of tool movement will increase the
0,05 – 25Nm t
en torque applied above the preset limit but with the
v em
° mo greater angle of tool movement this is less likely.
0,05 – 9Nm 20
rox.
a pp
1 – 10Nm
Applied Force
70 – 350Nm
Overtightening
Unlikely
0,9 – 3150Nm
3 Slipping Tools When the preset torque value is reached, a

Overtightening Impossible mechanism in the tool causes the application of
torque to cease and the tool slips free for a short
DREMOMETER 1 50 Torque
time until resetting occurs. Even if the application
of force is repeated, the preset torque value will
not be exceeded, therefore making it impossible
to overtighten a fastener. These tools are not
Preset Torque
Value length dependent.
Applied Force
Overtightening
Impossible
145
TORQUE TOOLS
TORCOFIX Robust torque wrench with square drive and integrated

ratchet-head function for controlled bi-directional tightening.
Scale
Easily readable double scale (Nm/lbf.ft), well protected behind a window with
a magnifying glass effect. The torque setting is readable on the scale or, more
particularly, on the scale in combination with the scale ring.
Ligthweight and reliable
Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory
Locking button enables reliable
certificate allowing for operations to be traced back. Calibrated
locking of the torque setting.
to a permitted +/- 3% deviation and better. The specifications Micrometer scale
of the standard (+/- 4%) are exceeded. Optimised shape, stable scale frame with
red-shaded micrometer scale ring.
Maximum +/- 3% tolerance: Model-dependent intervals of 0.025, 0.1, 0.25,
Guaranteed TORCOFIX accuracy of +/- 3% of 0.5 or 1Nm allow very accurate settings.
relevant scale value reading for each 5,000
tightening cycles.
Includes test certificate as per DIN EN ISO 6789.
Serial number on the wrench and on the certificate
allows clear product identification, traceable
to national norms.
Handgrip with a user aid
Black plastic handgrip, new ergonomically
enhanced shape, with an indentation in
the middle of the handgrip. User aid and
Automatic actuation reference points for calibration.
The TORCOFIX actuates with a clear tactile impulse and
audible signal and is immediately ready for operation again.
Chrome-plated ratchet head
All 1/4“-1/2“ square drives of the TORCOFIX K series Robust steel tube
have a black plastic cap – also referred With high corrosion protection, copper clad and chrome
to as a mushroom head. This mushroom head plated, silk-matt.
prevents an unintentional pulling out of the whole
square drive when changing the nut socket.
TORCOFIX K / SE / FS
4550
TORQUE WRENCH TORCOFIX K
40-750Nm / 30-550lbf·ft
Use: › Actuation accuracy: +/- 3% tolerance of the scale set to torque.
› For use in almost all industrial manufacturing areas. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.
› For controlled nut and bolt tightening. › Double scale Nm and lbf.ft behind window with magnifying effect.
Features: › Black plastic handgrip with slip-resistant ribbed surface.
› Adjustable torque wrench with a square drive and integrated ratchet head function. › Sturdy, varnished tubular steel construction, with zinc plated ratchet head and top grade plastic parts.
› For controlled bi-directional tightening. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm.
› Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › Supplied with a calibration certificate.
› In accordance with DIN EN ISO 6789, traceable to national norms. › Unique serial number for traceability.
„
Code No. a a Nm lbf·ft y 0
7601610 4550-20 1/2 12.5 40-200 30-150 485 1.10
7674330 4550-40 3/4 20.0 80-400 60-300 665 1.86
7674760
1521365
4550-55
4550-75
3/4
3/4
20.0
20.0
110-550
150-750
80-405
110-550
960
1240
3.56
4.50
FUNCTION
In order to change the turning direction of the TORCOFIX K: 2
› Press on the protruding square drive with your 1
thumb and take out the mushroom head, turn 3
the wrench over and re-insert the square drive.
180
146
4101
4150-4151
TORQUE WRENCH TORCOFIX SE
TORQUE WRENCH TORCOFIX FS
5-50Nm / 3.5-37lbf·ft
9x12 2-200Nm 9x12
Use: Use:
› For use in almost all industrial manufacturing areas. › For use in almost all industrial manufacturing areas. 14x18
› For controlled nut and bolt tightening. › For controlled nut and bolt tightening.
Features: Features:
› Adjustable torque wrench with a 9x12 rectangular cavity. › Adjustable torque wrench with a 9x12 or 14x18 rectangular cavity.
› For controlled bi-directional tightening. › For controlled bi-directional tightening.
› With pin-locking mechanism for replaceable 9x12 spanner end fittings. › With pin-locking mechanism for replaceable 9x12 or 14x18 spanner end fittings.
› In accordance with DIN EN ISO 6789, traceable to national norms. › In accordance with DIN EN ISO 6789, traceable to national norms.
› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Actuation accuracy: +/- 3% tolerance of the scale set to torque.
› Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.
› Double scale Nm and lbf.ft behind window with magnifying effect. › Double scale Nm and lbf.ft behind window with magnifying effect.
› Full-metal construction from high strength aluminium alloy. › Full-metal construction from high strength aluminium alloy.
› Supplied with a calibration certificate. › Supplied with a calibration certificate.
› Unique serial number for traceability. › Unique serial number for traceability.
„
Code No. : Nm y 0
7601960 4150-25 9x12 2-25 180 0.210
7602180 4150-50 9x12 5-50 240 0.270
„
Code No. : Nm lbf·in y 0 7602850 4150-85 9x12 15-85 320 0.340
1646206 4101-05 9x12 5-50 3,5-37 325 0.640 7603580 4151-20 14x18 20-200 400 0.750
TORCOFLEX UK
NEW
4549 3549 UK - 3550 UK
TORQUE WRENCH TORCOFIX K TORQUE WRENCH TORCOFLEX UK
1-50Nm / 0.75-37lbf·ft 5-200Nm
Use: Use:
› For use in almost all industrial manufacturing areas. › Ideal for fitment centres and automotive workshops.
› For controlled nut and bolt tightening. › For controlled nut and bolt tightening.
Features: Features:
› Adjustable torque wrench with a square drive and integrated ratchet head function. › Torque wrench with integrated lever-ratchet-head.
› For controlled bi-directional tightening. › Working accuracy: +/- 3% tolerance of scale set torque.
› Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › For controlled directional tightening
› In accordance with DIN EN ISO 6789, traceable to national norms. › Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate.
› Actuation accuracy: +/- 3% tolerance of the scale set to torque.
› Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.
› Double scale Nm and lbf.ft behind window with magnifying effect.
› Black plastic handgrip with slip-resistant ribbed surface.
› Full-metal construction from high strength aluminium alloy.
› Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm.
› Supplied with a calibration certificate.
› Unique serial number for traceability. FREE with 3550-UK-LS 3
17mm 19mm 21mm
„
Code No. a a Nm y 0
„
Code No. a a Nm lbf·in y 0 2958015 3549-02 UK 1/4 6.3 5-25 285.5 0.410
2201429 4549-00 1/4 6.3 1-5 0,75-3,7 225 0.323 2958023 3549-05 UK 3/8 10.0 10-50 348.5 0.820
1545132 4549-02 1/4 6.3 2-25 1,5-18 285 0.450 2958031 3550-10 UK 1/2 12.5 20-100 408.8 1.380
1545140 4549-05 3/8 10.0 10-50 7,5-37 335 0.540 3014398 3550-UK-LS 3 INCLUDES 1/2 12.5 40-200 499 1.990
3 FREE SOCKETS 17, 19, 21mm
147
TORQUE TOOLS
DREMASTER ®
Robust torque wrench with square drive and integrated
ratchet-head function for controlled bi-directional tightening
and interchangeable mushroom head with push-button release.
Chrome plated ratchet head Handgrip with a user aid

All 1/2” square drives of the DREMASTER DMK- Black plastic handgrip, new ergonomically
series have a black plastic cap – also referred enhanced shape, with an indentation in
to as a mushroom head. This mushroom head Robust steel tube Nonius the middle of the handgrip. User aid and
prevents an unintentional pulling out of the With high corrosion Model-dependent intervals reference points for calibration.
whole square drive when changing the socket. protection, chrome plated, of 1 or 0.5Nm allow for very
satin powder coated. accurate settings.
Classified to DIN EN ISO 6789:2003

Type II Class A, with a factory
certificate allowing for operations
to be traced back. Calibrated to
a permitted +/- 3% deviation
and better. Exceeding the
specifications standard of +/- 4%.
Ligthweight and reliable
Locking button enables reliable locking of the
torque setting. Torque adjustable reference by
means of opened lock symbol. Provision for rapid
setting from the separate hexagon allen key fixture.
Dual scale with main and alternative unit (Nm/Ibf·ft).

Main unit Nm with vernier. At all times only one unit in the
viewing area = avoids any reading errors. Change-over
switch next to the scale for straightforward unit selection.
Automatic actuation Additional protection of the serial number

The DREMASTER® DMK actuates with a clear Concealed setting drill hole = secured adjusting/setting system serial number
tactile impulse and audible signal and is on the wrench and on the certificate for unambiguous product identification,
immediately ready for operation again. traceable via in-house DAkkS laboratory to national standards.
Technical information Function 1

Anti-loss attachment
2
In order to change the turning
direction of the DREMASTER® DMK:
Press on the push-button with your thumb
and take out the mushroom head. Turn the 3
wrench over and re-insert the square drive.
180°
GEDORE Werkzeugfabrik Vertrieb DEUTSCHLAND Sales INTERNATIONAL

GmbH & Co. KG Fon +49 2191 596-900 Fon +49 2191 596-910
Remscheider Straße 149 Fax +49 2191 596-999 Fax +49 2191 596-911
All the benefits at a single glance

42899 Remscheid · GERMANY zentrale@gedore.com www.gedore.com
› Additional protection of the serial number. › Plastic grip with soft component.
› Concealed setting drill hole. › Dual scale (main unit with vernier).
› Engaging adjusting button with locking reference (lock symbol). › At all times only one unit in the viewing area (Nm or lbf·ft).
› Rapid adjustment provision using a separate hexagon allen key. › Change-over switch for selecting the unit.
› Mushroom head with release button and soft component. › Controlled safety via in-house DAkkS test laboratory.
2995832 01/16
148
DREMASTER®
DMK
TORQUE WRENCH DREMASTER®
20-850Nm / 15-630lbf·ft
› For use in all areas of industrial manufacturing. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated
› For controlled nut and bolt tightening. ratchet head and top grade plastic parts.
Features: › Ergonomically shaped, two-component plastic grip with calibration aid.
› Adjustable torque wrench with a square drive and integrated ratchet head function. › Double scale Nm and lbf.ft behind window with magnifying effect.
„
Code No. a a Nm lbf·ft 9 Scale ring y 0
2641232 DMK 100 1/2 12.5 20-100 15-75 5 N·m 0,5 N·m 423.5 1.10
2641240 DMK 200 1/2 12.5 40-200 30-150 10 N·m 1 N·m 514.5 1.30
2641259 DMK 300 1/2 12.5 60-300 45-220 10 N·m 1 N·m 606.4 1.50
2641267 DMK 400 3/4 20.0 80-400 60-300 10 N·m 1 N·m 714.8 2.40
2641275 DMK 550 3/4 20.0 110-550 80-405 10 N·m 1 N·m 953.2 3.80
2641283 DMK 750 3/4 20.0 150-750 110-550 10 N·m 1 N·m 1,228.2 4.90
2641291 DMK 850 3/4 20.0 250-850 185-630 10 N·m 1 N·m 1,375.2 5.20
9x12
DMSE
TORQUE WRENCH DREMASTER®
20-400Nm / 15-300lbf·ft
› For use in all areas of industrial manufacturing. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated ratchet
› For controlled nut and bolt tightening. head and top grade plastic parts.
Features: › Ergonomically shaped, two-component plastic grip with calibration aid.
› Adjustable torque wrench with a spigot end. › Double scale Nm and lbf.ft behind window with magnifying effect.
Code No. : Nm lbf·ft 9 Scale ring y 0

2641445 DMSE 100 9x12 20-100 15-75 5 N·m 0,5 N·m 398.5 1.00
2641453 DMSE 150 9x12 30-150 22-110 10 N·m 1 N·m 489.5 1.16
2641461 DMSE 200 14x18 40-200 30-150 10 N·m 1 N·m 499.5 1.25
2641488 DMSE 300 14x18 60-300 45-220 10 N·m 1 N·m 590.4 1.40
2641496 DMSE 400 14x18 80-400 60-300 10 N·m 1 N·m 677.2 2.00
149
TORQUE TOOLS
DREMOMETER
PERMANENT PRECISION
Torque wrench made of high-strength aluminium alloy
Drive in accordance with application Robust

DREMOMETERS are available for a large variety of applications in The full-metal construction of the DREMOMETER
controlled screw tightening. The single square drive for controlled makes it particularly unsusceptible to grime
clockwise tightening or the double square drive (L) for controlled and rough handling on construction sites, in
bi-directional tightening. Special utilisation areas for DREMOMETER with workshops and in industry.
spigot end (Z) and rectangular cavity (SE) particularly for hard-to-access
locations and where space is tight. Almost all DREMOMETER models have
separate ratchet heads, and there are good reasons for that: It is possible
to work with or without the ratchet head function as desired.
Model Automatic resetting

Classified to DIN EN ISO 6789:2003 Type II Class A, with The DREMOMETER gives the operator an audible
a factory certificate allowing for operations to be traced signal and tactile impulse and is back in operation in
back. Calibrated to a permitted +/- 3% deviation and an instant.
better. The specifications of the standard (+/- 4%) are
exceeded.
Working principle
The quality lever chain produced in Gedore‘s own drop forge
reduces the strain on the mechanics to a minimum. The
s b-g 6-3000Nm
proportioning of the individual levers, which are optimally 1
attuned to each other, gives the DREMOMETER its unique
precision and its long tool life.
tL b-f 6-2000Nm 1 Position of the lever chain without impact of force (in starting position).
2
2 Position of the lever chain with impact of force before the set torque is
achieved. The force is transferred from the primary lever to the intermediary and
final lever until the final lever slips past the so-called release lever through the
sliding back of the angle-lever body. 3
Z 8-1000Nm
3 Position of the lever chain when the force impacts after the torque setting
is achieved. Immediate position after the clear tactile impulse and audible signal
click. On relief, the lever chain moves back into the starting position (1).
SE } ~ 8-400Nm
150
Maximum precision Lightweight and pleasant
Extended tool life span even if used intensely. The aluminium housing and the ergonomically
designed handgrip enable simple and safe
operation over wide tightening ranges.
› Serial number on the wrench and on the certificate Scale

for product identification and traceability. Clear dual scale Nm and lbf·in/lbf·ft on every
DREMOMETER (apart from models E / EL / EK / EKL / F).
DREMOMETER Features
Operable without inaccuracies
Regardless of where you apply the force, at the centre of the handgrip or another part of the Setting of the torque value to Nm or alternatively to lbf·in / lbf·ft by the clumsy
DREMOMETER, with both hands or using an extension tube, your torque setting will always be hexagon key in the handgrip. The smooth-running mechanism enables the setting to
attained, without shifts in value. Due to its unique single-axis location of the centre of rotation and the be made quickly without significant force needing to be applied.
output square drive, the DREMOMETER is a tool that can be operated free from errors. In contrast to
2
conventional torque wrenches, this single lever enables tightening without shifts in the measured value
and without interference caused by activation outside of the handgrip.
3
However, value shifts are possible when activating the DREMOMETER with special wrenches or when
using wrenches with different depth gauges.
All DREMOMETERS are also available with locking
and safety device (A+S).
A+S
151
TORQUE TOOLS
DREMOMETER
8554
TORQUE WRENCH DREMOMETER
6-30Nm / 50-270lbf·in
Use:
› For use in almost all industrial manufacturing areas.
› For controlled nut and bolt tightening.
Features:
› Adjustable torque wrench with a 1/4” single square drive for controlled clockwise tightening.
› 1/4” square drive with ball-locking mechanism as per DIN 3120.
› In accordance with DIN EN ISO 6789, traceable to national norms.
› Automatic short path actuation with tactile impulse and audible signal.
› Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in.
› Unique serial number for traceability.
„
Code Type No. a a Contents 9 Nm lbf·in y 0
7775440 s 8554-01 1/4 6.3 ! in plastic box 1Nm / 10lbf·in 6-30 50-270 265 0.580
8560
8-40Nm / 70-350lbf·in
Use:
Features:
› Adjustable torque wrench with a 3/8”single square drive for controlled clockwise tightening.
„
7682000 s 8560-01 3/8 10 ! in plastic box 5Nm / 50lbf·in 8-40 70-350 338 1.00
8561
20-120Nm / 15-90lbf·ft
Use:
Features:
› Adjustable torque wrench with a 1/2”single square drive for controlled clockwise tightening.
„
Code Type No. a a Contents 9 Nm lbf·ft y 0
7683320 s 8561-01 1/2 12.5 ! in plastic box 5Nm / 5lbf·ft 20-120 15-90 462 1.50
152
8562
50-300Nm / 35-220lbf·ft
Use:
Features:
„
8573
40-200Nm / 30-150lbf·ft
Use:
Features:
„
8563 D & DR
140-760Nm / 105-560lbf·ft
Use:
Features:
„
7670180 s 8563-01 (DR) with extension tube 3/4 20 ! in plastic box 5Nm / 5lbf·ft 140-760 105-560 1400 5.00
7691500 s 8563-10 (D) 3/4 20 ! in plastic box 140-760 105-560 812 2.90
153
TORQUE TOOLS
8570
80-360Nm / 60-260lbf·ft
Use:
Features:
„
7688470 s 8570-10 3/4 20 ! in plastic box 5Nm / 5lbf·ft 80-360 60-260 718 2.40
8571
520-1000Nm / 380-730lbf·ft
Use:
Features:
„
7694010 s 8571-01 3/4 20 ! in plastic box 10Nm / 10lbf·ft 520-1000 380-730 800-1400 5.10
with ALU extension tube
8564
750-2000Nm
Use:
Features:
› Adjustable torque wrench with a 1” single square drive for controlled clockwise tightening.
› 1” square drive with ball-locking mechanism as per DIN 3120.
› Single scale Nm with scale graduation of 50Nm.
› Extension tube with maximum lever length of 1998mm.
„
Code Type No. a a Contents 9 Nm y 0
7695250 s 8564-01 1 25 ! with 2 extension tubes 50Nm 750-2000 932-2353 11.60
154
8572
1500-3000Nm
Use:
Features:
› Adjustable torque wrench with a 1.1/2” single square drive for controlled clockwise tightening.
› 1.1/2” square drive with ball-locking mechanism as per DIN 3120.
› Double scale with scale graduation of 50Nm.
› Extension tube with maximum lever length of 2343mm.
„
Code Type No. a a Contents 9 Nm y 0
7717160 s 8572-01 1.1/2 40 ! with 2 extension tubes 50Nm 1500-3000 1423-2343 13.20
753
TORQUE WRENCH DREMOMETER MINI
2-12Nm
Use:
Features:
› Window with a magnifying-glass effect.
› Double scale with a scale graduation of 0.5Nm and 5 lbf·in.
› Additional micrometer scale for setting interim values with Nm, graduations of 0.05Nm
„
1957694 Mini 753-11 1/4 6.3 ! in plastic box 0,5Nm / lbf·in + 0,05Nm 2-12 18-106 211 0.320
8200
TORQUE ANGLE INDICATOR
Use:
› Additional angle regulated tightening for controlled torque and angle activation.
Features:
› For additional precise angle tightening (0 - 360°)
› 1/2“ square drive with ball-locking device.
› With sliding magnetic and gripping arm.
› For use with a suitable torque wrench.
› The maximum output of the torque wrench must not be exceeded.
„ „
Code No. a Q , A° 0
1195980 8200-01 1/2 1/2 80 0-360 0.330
155
TORQUE TOOLS
TSN SLIPPER
Pre-set ratchet head torque wrench with automatic actuation
and slip function. Over-tightening is not possible.
High repeatability Rubber handgrip

Guarantees constant tightening torques. Ergonomic and pleasant to hold in your
Integrated ratchet function hand. Prevents slipping.
Particularly dependable ratchet with 36 teeth (759-
00/-01) or 48 teeth (759-02/-03). Slip-through
function guarantees controlled and safe screw
tightening, even in hard-to-access locations.
Output square drive

Made of quality steel with
Robust casting part
ball-locking mechanism
Made of corrosion-resistant, rustproof material.
Working principle Technical information
TSN SLIPPER TSN SLIPPER & TBN BREAKER

When the pre-set torque value is achieved, the mechanism slips All TSN Slipper and TBN Breaker torque wrenches (apart from 760-
through over the ball (without the possibility of over-tightening). 00/-01) are fitted with the patented Mechanical Torque Adjustment
The torque wrench is then immediately ready for the next Locking Device to modify torque tester.
operation.
759
TORQUE WRENCH TSN SLIPPER
3-125Nm / pre-set
Use: › Precision mechanism slides through very noticeably and audibly when the pre-set
› For use in all areas of production line assembly. torque is achieved – over tightening is not possible.
› For controlled nut and bolt tightening. › Automatic resetting to the starting position.
Features: › Lightweight yet stable and corrosion resistant construction design.
› Pre-set production torque wrench without scale. › Black, non-slip rubber handgrip.
› Square drive with ball-locking mechanism. › Supplied with a calibration certificate.
› Actuation accuracy: +/-4% tolerance of the set torque.
„
Code No. a a Nm y 0
7091900 759-00 1/4 6.3 5-25 216 0.340
7092040 759-01 1/4 6.3 5-25 216 0.340
7092120 759-02 3/8 10.0 15-55 324 0.800
7092200 759-03 1/2 12.5 40-125 460 1.360
156
761
TORQUE WRENCH TSP SLIPPER
1-10Nm / pre-set
Use:
› For use in all areas of assembly work where controlled tightening with low torque values is required › Precision mechanism slides through very noticeably and audibly when the pre-set
(eg electronic hardware sector). torque is achieved – over tightening is not possible.
› For controlled nut and bolt tightening. › Automatic resetting to the starting position.
Features:
› Lightweight yet stable and corrosion resistant construction design.
› Pre-set production torque wrench without scale. › ESD (electrostatic discharge) = electrostatically protected.
› Square drive with ball-locking mechanism. › Black, non-slip rubber handgrip.
› Integrated ratchet function for controlled clockwise tightening. › Supplied with a calibration certificate.
„
Code No. a a Nm y 0
1196650 761-05 1/4 6.3 1-5 185 0.190
1196731 761-10 1/4 6.3 2-10 185 0.190
762
TORQUE WRENCH TSC SLIPPER
1-10Nm
Use: › Precision mechanism slides through very noticeably and audibly when the pre-set
› For use in all areas of assembly work where controlled tightening with low torque values is required torque is achieved – over tightening is not possible.
(eg electronic hardware sector). › Automatic resetting to the starting position.
› For controlled nut and bolt tightening. › Lightweight yet stable and corrosion resistant construction design.
Features: › ESD (electrostatic discharge) = electrostatically protected.
› Square drive with ball-locking mechanism. › Black, non-slip rubber handgrip.
› Integrated ratchet function for controlled clockwise tightening. › Supplied with a calibration certificate.
„
Code No. a a Nm y 0
1196480 762-05 1/4 6.3 1-5 195 0.235
1196510 761-10 1/4 6.3 2-10 195 0.235
TSC
TORQUE WRENCH ADJUSTABLE SLIPPER
10-90Nm
Use: › Maintains production output by minimising operator fatigue through the tool’s
› For use in all areas of assembly work where controlled tightening with low torque values is required ergonomic design.
(eg electronic hardware sector). › Maximises productivity in restricted space through its compact slimline design.
› For controlled nut and bolt tightening. › EPA compliant for use in electrostatically sensitive applications.
Features: › Drive type made of stainless steel.
› Improved control of the fastening process by reducing the risk of both under and over tightening. › Supplied with a calibration certificate.
› Unique slipping mechanism, which gives the operator more time to react once the target torque is › Unique serial number for traceability.
reached. › Accessories available.
› Actuation accuracy: +/- 6% tolerance of the set torque.
„
Code No. a a Nm y 0
056060 TSC-45 1/4 6.3 10-45 195 0.235
056080 TSC-90 1/4 6.3 20-90 195 0.235
157
TORQUE TOOLS
TBN BREAKER
Pre-set torque wrench with automatic snap actuation. Torque wrench
offering maximum accuracy. Guaranteed tightening values without
over-tightening.
Drive Breaking
16mm spigot end or 9x12mm rectangular All TBN breaking torque wrenches
cavity made of quality steel with pin-locking break by 20° at the pivot point when
mechanism. the set torque is achieved. The models
760-00/-01 can also be set to a
breaking angle of 90°.
Rubber handgrip: Ergonomic and

pleasant to hold in your hand. Prevents
slipping.
Lightweight steel tube

Firm, solid and free of corrosion.
Patented mechanism
Guarantees a long product lifespan with
guaranteed accuracy values.
TBN Knicker TBN Knicker As an option, Gedore also manufactures the TBN
j } Breaker models 760-00/-01 with interchangeable
5 - 135Nm 0,2 - 135Nm fittings directly positioned on the tool.
Working principle Technical information
TBN BREAKER TBN BREAKER

When the TBN breaking torque wrench is operated, the rear section TBN Breaker 760-00/-01 values are changed using the Double
of the driver unit pushes on the roller. When the pre-set torque Positive adjustment system.
value is achieved, the lever switches over and the front section of
the drive unit breaks.
158
760 16 9x12
BREAKING TORQUE WRENCH TBN
0,4-200Nm / 44-147lbf·in / pre-set
Use:
› For controlled nut and bolt tightening. TBN-25G
› For use in all areas of production line assembly.
› Extremely durable.
Features:
› Pre-set production torque wrench – without scale TBN-135G
› With 9x12mm rectangular cavity end or 16mm spigot-end.
› For bi-directional tightening (the wrench only has to be turned by 180°).
› Actuation accuracy: +/- 4% tolerance of the set torque.
› Precision mechanism slides through very noticeably and audibly when the pre-set
torque is achieved – over tightening is not possible.
› Automatic resetting to the starting position. TBN-65
› Lightweight yet stable and corrosion resistant construction design.
› Black, non-slip rubber handgrip.
› No. 760-00/-01: EPA (Electrostatic Protected Area) compliant.
› The TBN range is available with a variety of end fitting styles.
Code No. Ø : EPA Nm lbf·in y 0

7090690 TBN-2G 9x12 x 0.4-2 1.8-18 133 0.125
7090770 TBN-10G 9x12 x 1-10 9-89 133 0.145
1824694 TBN-25G 9x12 5-25 44-221 265 0.405
1824716 TBN-65G 9x12 10-65 89-575 302 0.745
1824732 TBN-135G 9x12 25-135 177-1195 408 1.030
050310 TBN-200G 14x18 40-200 520 1.400
1825686 TBN-25 16 5-25 44-221 265 0.410

1824708 TBN-65 16 10-65 89-575 302 0.750
1824724 TBN-135 16 20-135 177-1195 408 1.030
050300 TBN-200 16 40-200 520 1.400
ATB SE 9x12
ADJUSTABLE BREAKING TORQUE WRENCH

1-10Nm
Use:
› Controlled bolt and nut tightening.
› For use in all areas of production line assembly.
› Extremely durable.
Features:
› Compact design allows easy access where space is restricted.
› With 9x12 mm rectangular end.
› Offers improved control of the tightening process by reducing the risk of under and over
tightening. This is achieved by Torqueleader’s unique breaking mechanism that allows
the operator more time to react once the target torque is achieved.
› Accuracy +/- 6% of reading.
› Reduces the likelihood of warranty claims and rework by assuring process control through accurate
and repeatable torque application.
› Automatic resetting to the starting position.
› Fast and accurate to set using the quick and easy to read micrometer setting scale.
› Black, non-slip rubber handgrip.
› This tool is length dependent, with hand position altering the torque applied.
› Accessories available.
Code No. : ISO y 0

2839636 ATB-5G 9x12 1-5 230 0.290
2839644 ATB-10G 9x12 2-10 230 0.300
159
TORQUE TOOLS
Torque wrench Type 88
8801
TORQUE WRENCH
150-1500Nm
Use: › Breaker mechanism (handle snaps over) is seen and felt when selected torque is
› Controlled bolt and nut tightening in the range 100 - 1500Nm. reached, reducing the likelihood of over tightening.
› For use in all areas of industry, automotive sector and machine maintenance. › Dual scale in Nm and lbf·ft
Features: › Actuation accuracy: +/- 4% tolerance of the value setting.
› Adjustable torque wrench with scale. › 4 models in the range 150 - 1500Nm
› 3/4"square drive with integrated ratchet function. › Robust construction.
› Push-through square drive for bi-directional tightening. › Supplied with a calibration certificate and unique serial number for traceability.
› In accordance with DIN EN ISO 6789, traceable to national norms. › Delivered in sturdy cardboard packaging
„
Code No. a a 9 Nm y 0
3022854 8801-01 3/4 20 10Nm 150-700 915 5.500
3022862 8801-02 3/4 20 10Nm 200-800 1090 6.000
3022870 8801-03 3/4 20 20Nm 300-1000 1470 7.300
3022889 8801-04 3/4 20 25Nm 700-1500 1470 10.00
Torcotronic lll
TT3KH
ELECTRONIC TORQUE WRENCH TORCOTRONIC III
70-350Nm / 51.6-258.2lbf·ft
Use: › Resolution torque: 0.1Nm.

› For everyday requirements in installation and torque control. › Resolution torque angle: 0.1°.
› For use in all areas of manufacturing and development. › PC-software easy to operate for uncomplicated programming and
Features: documentation of data.
› Microprocessor controlled, electronic torque wrench with CE symbol. › Data can be transfered to MS Excel®.
› For controlled bi-directional tightening › Keyboard lock.
› Broad measurement range in Nm, can be switched to lbf·ft. › Operation with standard Mignon AA or optional with rechargeable-battery (NiMH).
› With 1/2” reversible ratchet. The ratchet is exchangeable, providing the option of using › Visual signal: 3x LED (yellow, green, red).
a 9x12mm (8455-120) or 14x18mm (8455-350) square socket. › Acoustic signal: buzzer.
Characteristics: Scope of delivery:
› Torque and torque angle measure. › Electronic torque wrench TorcoTronic III HighLine.
› 5 different measuring modes. › Reversible ratchet 1/2".
› 5 parameters storable. › USB cable.
› USB interface for data exchange. › Software on CD-R.
› 2000 storage places › Supplied with a calibration certificate.
› High measurement accuracy: +/-1% tolerance for all read-off values, +/-1 digit. › Delivered in a transparent plastic box with insert.
› Different depth gauges for end fittings programmable. Attention:
› Simple to operate with easy to understand icon-menu navigation and 4 functional keys. › A PC, running Windows® operating system (from Windows XP®) is required to obtain the full benefit of
› Clearly readable, illuminated LCD display. all the functions of this product.
*WHILE STOCKS LAST

„
Code No. a a : N·m lbf·ft 0
2648644 TT3KH-350 * 1/2 12.5 14x18 70-350 51.6-258.2 1.20
160
Torque wrench Type 83
TORQUE WRENCHES WITH SLAVE POINTER

IDEAL FOR TEST, CONTROL AND MAINTENANCE WORK
Clear product identification: Provided by the type plate/label.
The article number and the serial number always ensure traceabili- Practical handgrip: Handgrip shaped in
ty to test and check the tool. accordance with the most recent ergonomic
findings. Resistant to grease and oil.
Solid tube: Light-metal tube FEATURES

with plastic sleeving.
Integrated ratchet spindle:
The double square drive enables Dual scale: Nm and lbf·in/lbf·ft with main
high-speed bi-directional and slave pointers, protected by a strong
tightening. window made of Trogamid T.
The working principle of the torque wrench with slave pointer type 83
8301 - 8302
TORQUE WRENCH WITH SLAVE POINTER
0.8-200Nm
Use: Scope of delivery:

› Controlled tightening and verification of tightening values. › Dial-measuring torque wrench type 83.
› For use in all areas of industrial manufacturing and quality control. › Test certificate accoring to DIN EN ISO 6789.
› Working ranges of 0.8 to 200Nm are covered. › Delivered in a sturdy black plastic box (no. 8301-04 to 8302-20).
Features:
› Dial-indicating torque wrench with dual scale and multi-functional slave pointer.
› 1/4", 3/8", 1/2" double-square drive with ball locking device for controlled bi-directional tightening.
› Models 8301-04 to 8302-20: With integrated ratchet function.
› For controlled screw tightening and torque measurements.
› Working accuracy: +/- 4% tolerance of the indicated torque.
› Double scale in Nm and lbf·in or lbf·ft display on double tinted clearly readable face.
› Integrated overload protection – mechanical stop up to maximum 25% overload of the maximum
value.
› Housing made of lightweight, robust special aluminium construction – lacquered, silver-grey.
› Black, non-slip rubber handgrips. 8301
› Models 8301-04 to 8301-40: EPA-conformant (Electrostatic Protected Area), for use in sensitive
electrostatic applications.
8302
„
Code No. Type a a 9 Nm lbf·in Height y EPA 0
7651390 8301-04 t 1/4 6.3 0,1Nm / 1lbf·in 0,8-4 7-35 61 244 x 0.500
7651470 8301-12 t 1/4 6.3 0,5Nm / 2lbf·in 2,4-12 21-105 61 244 x 0.500
7651550 8301-25 t 3/8 10.0 1Nm / 10lbf·in 5-25 44-240 69 244 x 0.500
7651630 8301-40 t 3/8 10.0 1Nm / 10lbf·in 8-40 72-360 69 244 x 0.500
7651710 8302-08 t 1/2 12.5 2Nm / 1lbf·ft 16-80 12-60 86 435 1.400
7651980 8302-20 t 1/2 12.5 5Nm / 5lbf·ft 40-200 30-160 86 435 1.400
161
TORQUE TOOLS
TORQUE SCREWDRIVERS 756

Rubber handgrip: Ergonomic,
ensuring a secure grip.
1/4" drive type: Made Sliding T-Bar: Made of qua-

of stainless steel, for lity steel, can be adapted to
industry-standard bits. enhance user‘s, transmission
of power.
Positive-Lock system: Locks the Scale: Clearly readable scale ring; enables
set torque, reliably preventing it from you to make the setting accurately, quickly
wrong setting. and without error.
756
TORQUE SCREWDRIVER TYPE S
0.24-9Nm
Use: › EPA-conformant (Electrostatic Protected Area), for use in sensitive
› For controlled screw tightening. electrostatic applications
› For use in electrical hardware, industrial manufacturing or in quality control. Scope of delivery:
Features: › Torque wrench type 756.
› Adjustable torque screwdriver – with scale. › 1/4" square/hexagon drive adapter (no. 757-20).
› With 1/4" female hexagon drive for use with 1/4" hexagon bits. › Models 756-06/-09 with additional sliding T-bar for ease of use.
› Actuation accuracy: +/- 6% tolerance of the set torque. › Supplied with a calibration certificate.
› Precision radial ball clutch and cam design for controlled bi-directional tightening
› Precision mechanism slips through very noticeably when the pre-set torque is achieved.
› Automatic resetting to the starting position.
› With set-torque-locking ‘positive-lock’ system, automatically fixes the set torque.
› Non-slip rubber handgrip.
› Micrometer scaling: 1cNm and 0.1Nm.
„ „
Code No. a a - - 9 Nm cN.m Height y 0
1400150 756-01 1/4 6.3 1/4 6.3 1cNm 0,24-1,2 20-120 61 183 0.165
1400169 756-06 1/4 6.3 1/4 6.3 0,1Nm 1-6 120-600 61 196 0.340
1400177 756-09 1/4 6.3 1/4 6.3 0,1Nm 4-9 400-900 69 196 0.340
TLS PRO
PRESET TORQUE SCREWDRIVER
0.05-13.5Nm
› Accurate process control is ensured by eliminating under and over tightening due to Torqueleader’s proven
slipping technology.
› Years of dependable service is provided by the robust design especially if regularly calibrated.
› Calibration stickers can be easily applied to the purpose designed nose.
› To allow for customisation and clear identification, interchangeable coloured end caps are available.
› Increased production efficiency by reducing operator fatigue due to a specifically
designed ergonomic handgrip combined with a smooth tool reset action.
› To assist with higher torque, T-bars come standard with the Pro and ESD 450 and 1350 models.
„
Code No. - - Nm cNm y 0
065400 TLS PRO 25H 1/4 6.3 0.05-0.25 5-25 132 0.210
065500 TLS PRO 150H 1/4 6.3 0.2-1.5 20-150 132 0.210
065600 TLS PRO 450H 1/4 6.3 0.5-4.5 50-450 140 0.230
065700 TLS PRO 1350H 1/4 6.3 2.5-13.5 250-1350 140 0.230
162
8612 8612-050 – 8612-3150
Use:
› For verifying and setting clockwise torque wrenches and torque screwdrivers.
ELECTRONIC TORQUE TESTER Features:
› Simple, electronic torque tester with integrated torque transducer (DMS).
DREMOTEST E › 4 models in the range from 0.9 to 3150Nm.
› Model 8612-3150 with 10mm, 17mm and 36mm hexagonal socket (size
dependent).
0.9-3150Nm › Model 8612-3150 with 1“ square drive adapter.
› Models 8612-050 - 8612-1000 with 1/4", 3/8" or 1/2"square drive adapter
(depending on the size).
› High measurement accuracy: +/- 1 % tolerance of reading, +/- 1 digit.
› Break-point measurement (1st peak).
› Auto reset.
› Can be switched from Nm to lbf·ft.
› Serial RS232 interface.
8612-720 Scope of delivery:
8612-720 – 8612-740 › Electronic torque tester.
› Guaranteed measuring accuracy: +/-2% of read-out in the core range of 20-100% of the scale. › RS232 cable.
› Double scale in cNm and ozf.in or Nm and lbf.in. › Power supply unit.
› For testing and setting clockwise torque wrenches and screwdrivers in the lower torque range of 0-25Nm. › 100 - 240 V, 50 - 60 Hz, maximum 500mA (see type plate).
› 2 sockets (size and drive model-dependent).
› Adapter for 8612-3150.
› Operating instructions.
*WHILE STOCKS LAST
„ „ „
Code No. - - a Resolution Adapter Q lbf·ft Nm cNm/Nm ozf.in/lbf.in Gradation 0
1824635 8612-720 * 1/4 1/4 26-130 36-180 2cNm/2ozf.in 10.000
1824651 8612-740 * 1/4, 3/8 2.4-12 0.2-2 0.2Nm/2lbf.in 3.200
1947699 8612-050 * 10 0.01 1/4, 3/8 0.7-40.6 0.9-55 3.000

1856111 8612-300 * 17 0.1 3/8, 1/2 7-236 9-320 3.000
1947702 8612-1000 * 36 1 1/2, 3/4 66-811 90-1100 10.000
2529858 8612-3150 * 1 1 369-2323 500-3150 26.000
Torque calibration analysers
NEW
CAPTURELITE
The latest edition to the Gedore Capture range is Capture Lite. A robust Torque tester for use in industrial, automotive and
production environments. Suitable for use with clicker, breaking and slipping wrenches and torque screwdrivers.
The robust construction with aluminium anodised body ensures long tool life. OLED display, safely housed The Torque tester is easy to operate and can be used by operators at any skill level.
under a robust perspex screen protector allows for a compact design. Easy to read display gives the operator a quick and efficient method for checking their tools.
Capture Lite’s contemporary & high quality appearance means that it is appropriate and well adapted for Designed to give the user confidence that their Torque tools are operating within limits. Capture Lite has
use in high technology & manufacturing environments. three modes: Peak- displaying the highest torque value reached, First Peak- displaying the first peak
Capture Lite’s power and data links via the USB port located at the rear of the device allow data to be torque value & Track -progressively tracks the applied torque.
exported if required. To protect the Capture Lite when not in use it is supplied with a protective carry case and USB power cable.
› One piece aluminium lightweight design.

› Clear to read OLED Display for accurate readings.
› Simple one button design for ease of use.
› Supplied with USB connection for portability with ability to use a power bank etc.
› Easy to switch between N.m, lbf.in and lbf.ft units allowing a range of measurements to be used.
› Supplied with an in-house calibration certificate.
› Suitable for bench or wall mounting.
› As with all Gedore Torque Tools our products are guaranteed by a 2 year warranty.
› Gedore Torque offer a full and comprehensive after sales service for all our tools.
„ „
Code No. Nm a - Dimensions (mm) Hole centres (mm) Accuracy +/- 0
038120 CL 10 1-10 1/4 120x70 90 1% 1.400
038160 CL 400 1-400 3/4 120x70 90 1% 1.600
*CL 400 is supplied with 3/8” + 1/2” adaptors
163
TORQUE TOOLS
NEW
CAPTURE HUB
Use:
Quality Control (Power tool checks, line side checks, etc.)
Calibration (In house calibrations, etc.)
TOOL BENEFITS AND FEATURES
› Capture Family User layout / menus (Same operation as Capture Display)

› Supplied with an in-house calibration certificate. UKAS calibration is available on request
› Auto Filtering for power tools Intelligent software
› On Board Memory – 50 Tools & 2000 Torque reading storage
› Capture Manager software compatibility for certificate generation
› Rundown adaptors - Hard, medium and soft joint supplied
› Capture Sensor connectivity – ability to connect external sensors, plug n play
› Clear easy to read display, with limits warnings
„
Code Description Nm Accuracy +/- a HxWxD 0
036910 CH1 0.1-1 1% 1/4 50 x 200 x 110 1.190
036920 CH2 0.2-2 1% 1/4 50 x 200 x 110 1.190
036930 CH5 0.5-5 1% 1/4 50 x 200 x 110 1.190
036930 CH25 2.5-25 1% 3/4 50 x 200 x 110 1.200
TBC CL3000
NEW
CAPTURE DISPLAY AND SENSOR
Use:
Quality Control (line side checks, etc.)
Calibration (Calibration houses, in house calibrations, certificate generation, etc.)
TOOL BENEFITS AND FEATURES
› Capture Family User layout / menus (Same operation as Capture Display)

› Sensors supplied with a UKAS calibration to BS7882 Class 1 or better
› On Board Memory – 500 Tools & 2000 Torque reading storage
› Capture Manager software compatibility for certificate generation
› USB connection for data transfer
› Clear easy to read display, with limits warnings
› Capture Display integrates with competitors’ 2mV/V sensors / transducers, plug n play
› Battery or Mains powered
„
Code Description Nm Accuracy +/- a HxWxD 0
038802 CS1.5 0.1-1.5 1% 1/4 62 x 85 x 65 0.500
038805 CS2 0.2-2 1% 1/4 62 x 85 x 65 0.500
038807 CS5 0.5-5 1% 1/4 62 x 85 x 65 0.500
038810 CS10 1-10 1% 1/4 62 x 85 x 65 0.500
038815 CS25 2.5-25 1% 3/8 62 x 85 x 65 0.500 Code Description HxWxD 0
038820 CS50 5-50 1% 3/8 62 x 85 x 65 0.570 038700 Capture Display 80 x 170 x 140 0.780
038825 CS100 10-100 1% 1/2 62 x 85 x 65 0.600 038703 4 way switch (allows 4 sensors to connect to display) 80 x 170 x 140 0.700
038830 CS250 25-250 1% 1/2 82 x 120 x 87 1.450 036246 Capture Cable (Capture Display to Capture Sensor)
038835 CS500 50-500 1% 3/4 82 x 100 x 87 1.600 036226 Capture Cable (Capture Display to Custom Sensor)
038845 CS1500 150-1500 1% 1 100 x 165 x 134 4.000 038710 Capture Manager Software
164
End fittings 9x12 / 14x18 SE
9x12
7112 / 7118
14x18
RECTANGULAR OPEN END FITTING
9x12-14x18
7112-13
7118-19
› For accessing bolts in cramped and hard-to-reach locations, easy to change.
› Forged.
› Chrome Vanadium steel, matt chrome plated.
› With eject-pin for unlocking.
Code No. ! : 4 r Depth gauge 0 Code No. ! : 4 r Depth gauge 0

7688390 7112-07 7 9 x 12 5.5 20.0 17.5 0.035 7689870 7118-13 13 14 x 18 7 30.0 25.0 0.120
7688550 7112-08 8 9 x 12 5.5 21.5 17.5 0.035 7690020 7118-14 14 14 x 18 7 32.0 25.0 0.120
7679050 7112-09 9 9 x 12 5.5 23.0 17.5 0.035 7690100 7118-15 15 14 x 18 7 34.0 25.0 0.120
7688630 7112-10 10 9 x 12 5.5 24.5 17.5 0.040 7685610 7118-16 16 14 x 18 9 35.5 25.0 0.130
7688980 7112-11 11 9 x 12 5.5 26.0 17.5 0.030 7690370 7118-17 17 14 x 18 9 37.0 25.0 0.130
7679560 7112-12 12 9 x 12 5.5 27.5 17.5 0.035 7686180 7118-18 18 14 x 18 9 39.0 25.0 0.130
7689010 7112-13 13 9 x 12 5.5 29.0 17.5 0.035 7690450 7118-19 19 14 x 18 9 41.0 25.0 0.130
7689360 7112-14 14 9 x 12 7.5 31.0 20.0 0.040 7686420 7118-21 21 14 x 18 11 45.0 25.0 0.155
7689440 7112-15 15 9 x 12 7.5 33.0 20.0 0.040 7690610 7118-22 22 14 x 18 11 47.0 25.0 0.150
7679990 7112-16 16 9 x 12 7.5 35.0 20.0 0.045 7690880 7118-24 24 14 x 18 11 51.0 25.0 0.170
7689600 7112-17 17 9 x 12 7.5 37.0 20.0 0.050 7690960 7118-27 27 14 x 18 13 58.5 32.5 0.185
7684560 7112-18 18 9 x 12 7.5 39.0 20.0 0.060 7691260 7118-30 30 14 x 18 13 67.5 32.5 0.220
7689790 7112-19 19 9 x 12 7.5 41.0 20.0 0.060 7687740 7118-32 32 14 x 18 13 67.5 32.5 0.220
7212 / 7218 9x12

RECTANGULAR RING END FITTING 14x18
9x12-14x18
7212-19
7218-19
› Forged.
*WHILE STOCKS LAST
Code No. ! : 4 r Depth gauge 0 Code No. ! : 4 r Depth gauge 0

7691340 7212-07 * 7 9 x 12 8 13.0 17.5 0.030 7693120 7218-13 13 14 x 18 12.0 21.5 25 0.120
7691420 7212-08 * 8 9 x 12 8 14.2 17.5 0.035 7693390 7218-14 14 14 x 18 12.0 23.0 25 0.120
7691690 7212-10 * 10 9 x 12 8 17.2 17.5 0.040 7693470 7218-15 15 14 x 18 12.0 24.2 25 0.120
7691770 7212-11 * 11 9 x 12 8 18.6 17.5 0.030 7678320 7218-16 16 14 x 18 12.0 25.7 25 0.125
7677940 7212-12 * 12 9 x 12 12 20.0 17.5 0.035 7693630 7218-17 17 14 x 18 12.0 27.2 25 0.125
7691930 7678830 7218-18 18 14 x 18 12.0 28.5 25 0.125
7212-13 * 13 9 x 12 12 21.5 17.5 0.035
7693710 7218-19 19 14 x 18 12.0 30.5 25 0.125
7692230 7212-14 * 14 9 x 12 12 23.0 17.5 0.040
7678910 7218-21 21 14 x 18 15.0 33.0 25 0.140
7692580 7212-15 * 15 9 x 12 12 24.0 17.5 0.040
7693980 7218-22 22 14 x 18 15.0 34.5 25 0.140
7678080 7212-16 * 16 9 x 12 13 26.0 17.5 0.040
7694280 7218-24 24 14 x 18 15.0 37.5 25 0.140
7692740 7212-17 * 17 9 x 12 13 27.0 17.5 0.040 7694440 7218-27 27 14 x 18 17.5 41.5 31 0.150
7678160 7212-18 * 18 9 x 12 13 28.5 17.5 0.040 7694790 7218-30 30 14 x 18 17.5 45.0 31 0.160
7692820 7212-19 * 19 9 x 12 13 30.5 17.5 0.040 7695920 7218-32 32 14 x 18 17.5 47.5 31 0.165
7678240 7212-21 * 21 9 x 12 15 33.0 17.5 0.040
165
TORQUE TOOLS
7412 / 7418 9x12 14x18
RECTANGULAR REVERSIBLE
RATCHET HEAD
9x12-14x18
› Forged.
› Fine-toothed.
› 7412 with return angle of 5 degrees
› 7418 with return angle of 7 degrees
› Maximum continuous load of ratchet according to DIN EN ISO 6789:2003 and/or maximum load of cavity.
7418
7412
Code No. a" : 4 r Depth gauge 0

7672710 7412-00 1/4 9 x 12 16.6 25 17.5 0.060
7686500 7412-01 3/8 9 x 12 23.2 34 17.5 0.140
7687230 7412-02 1/2 9 x 12 24.2 34 17.5 0.150
7687580 7418-02 1/2 14 x 18 28.8 47 25 0.350
7687660 7418-04 3/4 14 x 18 35.5 64 33 0.780
754
RATCHET HEAD
1/2“-1“
› Enables controlled torque tightening in combination with a DREMOMETER torque wrench.

› Forged.
› Made from Chrome Vanadium steel.
› Fine-pitched, sturdy ratchet head.
› With 1/2”, 3/4” and 1” output square drive.
› For clockwise tightening.
Code No. a„ 0
7680650 754-02 1/2 0.350
7680730 754-04 3/4 1.00
7680810 754-06 1 2.50
166
TORQUE MULTIPLIERS
DREMOPLUS ALU
Se
rie 18
M n-N 0 00 5
M ode o. D V 0 2. 1:
·m
To ax. l
2 0N
t
I
rq np 011 30
f·f
ue ut Ratio t 1 lb
2 70
O u t pu 9 50
N·m M a x.
200 l Torque
bf·f t
Safety Plus
Your advantage
› The slender, lighter structure of the appliances ensures convenient and safe working – even where conditions are particularly cramped.
› Repetition-accurate and precise results – supported by individual factory test certificates – ensure a maximum degree of job safety.
› High degree of resilience and long life of the appliances attributable to a low-backlash planet gear with Ceramic-Teflon® coating.
› A 30%+ lighter steel housing thanks to the use of high-performance aluminium.
› Each multiplier‘s torque range is checked at the factory and provided with an individual factory test certificate.
› Precise, reliable figures – even under extreme climatic conditions
› Easy to operate: The most common input/output torques on the torque multiplier.
167
TORQUE MULTIPLIERS
TOOLS
PRODUCT OVERVIEW TORQUE MULTIPLIERS

DREMOPLUS ALU
Shearing square
Ceramic-Teflon®
Anti-wind-up ratchet
non-destructive
tested and certificated

Sun gear
Accuracy + / -
Reaction arm
coating
Slipper
Output drive
Series / Type
Range Nm
Ratio
Drive
Overload safety mechanism
DVV-13 Z 3% 1/2" 3/4" 1:5 Z 250 – 1.300Nm
DVI-20 Z 3% 3/4" 1" 1:4 Z 500 – 2.000Nm
DVI-20L 3% 3/4" 1" 1:4 L 500 – 2.000Nm
DVI-28Z 3% 3/4" 1" 1:5,5 Z 500 – 2.800Nm
DVI-28L 3% 3/4" 1" 1:5,5 L 500 – 2.800Nm
DVV-40Z 3% 1/2" 1" 1:16 Z 500 – 4.000Nm
DVV-40ZRS 3% 1/2" 1" 1:16 Z 500 – 4.000Nm
DVV-60ZRS 3% 3/4" 1.1/2" 1:18 Z 700 – 6.000Nm
DVV-80ZRS 3% 3/4" 1.1/2" 1:22 Z 750 – 8.000Nm
DVV-100ZRS 3% 3/4" 1.1/2" 1:28,5 Z 1.000 – 10.000Nm
DVV-130ZRS 3% 3/4" 1.1/2" 1:39 Z 1.200 – 13.000Nm
DVV-540RS 3% 3/4" 2.1/2" 1:175 – 7.000 – 54.000Nm
168
Choosing the right reaction arm Choosing the right reaction arm
Reaction arm Z-form Reaction arm L-form
› A flexible offset reaction arm which has proven itself as the standard solution. › This straight reaction arm with adjustable reaction square is
› Anchor points are, for instance, adjoining screws, walls, machine parts and other admirably suited for flange screw connections.
stable abutments. › The L-form reaction arm‘s support has a larger radius than
› This reaction arm can be ideally used where conditions are quite cramped. the Z-form.
The L-form is also ideal for those points above the screw-
tightening level. However, the resulting tilting moment causes
the maximum permitted torque to drop
by 20%.
Choosing the right torque assembly tool for

screws and nuts
› It is vital that use is made of a torque wrench complete with ratchet function
(integrated or separate) for torque multipliers without anti-wind-up ratchet.
› For models with an anti-wind-up ratchet, we recommend the use of torque tools
complete with ratchet function (integrated or separate) for ease of working.
169
TORQUE MULTIPLIERS
TOOLS
DREMOPLUS ALU FAMILY 3

DVV-13Z
1/2" input square.
Lightweight: High-performance
aluminium housing is 30% lighter
than a steel one.
Low backlash, single-stage planet
gear for a long service life.
Flexible: With detachable Z-form

reaction arm; can be optionally
retrofitted with long reaction
arm incorporating an adjustable
reaction square (L-form) of
lightweight metal.
Output square 3/4" with drill

hole for impact sockets with
safety pin and ring.
Reaction arm: Forged reaction
arm absorbs any arising counter
force.
100% quality check The GEDORE maintenance service

promoting service life and safety
› Delivery includes factory test certificate
› The most common input/output torques › Regular maintenance can considerably lengthen the service life of your GEDORE torque multiplier
on the torque multiplier.
and also contribute to your safety.
› Maintenance involves our qualified personnel examining the individual components, testing their
functional precision and verifying the factory certificate.
› In such an instance, we would gladly give you a quote.
› We will, of course, continue to support you should you have any questions on and problems with the
Se
M rien- 00
9
00 6
1
former DREMOPLUS models - just get in touch with us !
M od No. D V 0 7. 1:
› Should a guarantee case arise - then either hand the appliance to your dealer or send it directly to
·m
To ax. el 2 N
0 0 l bf
·f t
rq Inp 011 Ratio

ue ut t 40
3 00 t pu 2 9 3 0
Max.Ou
220 l
N·m
bf·f t Torque your nearest Gedore agency.
170
DVV-13Z
TORQUE MULTIPLIER DREMOPLUS ALU
1300Nm / 950lbf·ft
Particularly suitable for:

› Industry, construction sites, car and truck garages, agricultural technology.
› Bridge, aircraft and railway construction, ship building, refineries.
› Machinery and plant engineering, maintenance.
Features:
› Mechanical hand torque multiplier for controlled screw tightening
and loosening.
› With a single-stage planet gear.
› High-performance aluminium housing.
› With Z-form offset reaction arm of Chrome Vanadium steel.
› Can be optionally retrofitted with L-form straight reaction arm – with adjustable reaction arm
– of lightweight metal.
› Multiplication at the ratio of 1:5.
› Guaranteed accuracy: Better than +/- 3% tolerance.
› For operation in combination with a torque wrench.
› 1 model for a maximum load of around a maximum 1300Nm.
› Also available as set (No. DVV-13ZG) with three different impact sockets – sizes 27, 30, 32mm.
› Output square with drill hole for impact sockets with safety pin and ring.
Scope of delivery:
› Torque Multiplier DREMOPLUS ALU.
› With Z-form offset reaction arm.
› Delivery in sturdy shipping case with foam insert.
› Factory test certificate and setting table.
› Detailed technical information is available on request.
DVV-13Z
DVV-13ZG
DVV-13Z
„ „
Code No. < max. < max. g Q C a D A B Cmin Cmax Dmin Dmax ; max. ; max. 0
Nm Output lbf·ft Output Nm Input lbf·ft Input
$ $
2653370 DVV-13Z 1300 950 1:5 1/2 3/4 80 133 56 95 165 173 270 200 1.900
OPTIONAL ACCESSORIES
Code No. Description A B Cmin Cmax 0

2653400 RL-DVV13 * Reaction arm L-form straight for DVV-13, 3/4“ 80 133 60 159 0.800
171
TORQUE MULTIPLIERS
TOOLS

DVI-20L/Z AND DVI-28L/Z
3/4" input square Lightweight: High-performance

aluminium housing is 30 %
lighter than a steel one.
Low backlash, single-stage A Z-form forged reaction arm of

planet gear for a long chrome-vanadium steel absorbs
service life any arising counter-force.
Output square 1" with drill

hole for impact sockets with
safety pin and ring
Overload safety mechanism

achieved from a classic
shearing square
DVI-20Z and DVI-28Z DVI-20L and DVI-28L

› Reaction arm Z-form offset › Reaction arm L-form with adjustable
› fix integrated reaction square drive
› fix integrated
100% quality check

› Delivery includes factory test certificate
› The most common INPUT/OUTPUT torques M od
Se
M rien-
No. D V 0 7.
00
9
00 6
1:
1
·m
To ax. el 2 0N f
on the torque multiplier
·f t
rq Inp 011 Ratio 00

ue ut t4 lb
3 00 t pu 2 9 3 0
N·m Max.Ou
220 l Torque
bf·f t
1:4 1:4 1:5,5 1:5,5

2.000 N-M 2.000 N-M 2.000 N-M 2.000 N-M
172
DVI-20L/Z & DVI-28L/Z
2000-2800Nm / 1500-2050lbf·ft

› Industry, construction sites, car and truck garages, agricultural technology, construction machinery.
› Bridge, aircraft and railway construction, ship building, refineries.
› Machinery and plant engineering, maintenance.
Features:
and loosening.
› With a single-stage planet gear.
› Multiplication at the ratio of 1:4, 1:5.5.
› 2 models for maximum load in the range between maximum 2000Nm and 2800Nm.
› Z model: with Z-form, offset reaction arm of Chrome Vanadium steel.
› L model: with L-form straight reaction arm - with adjustable reaction square - of lightweight metal. DVI-28Z
› Output square with drill hole for impact sockets with safety pin and ring.
Scope of delivery:
› With firmly integrated reaction arm of a Z- or L-form depending on model.
› Detailed technical information
is available on request.
DVI-28L
„ „
Code No. < max. < max. g Reaction arm Q C a D A B Cmin Cmax ; max. ; max. 0
$ $
2653265 DVI-20Z 2000 1500 1:4 offset 3/4 1 88 131 100 150 580 430 2.900
2653273 DVI-28Z 2800 2050 1:5,5 offset 3/4 1 106 146 100 150 550 410 3.900
2653249 DVI-20L 2000 1500 1:4 straight 3/4 1 88 131 73 152 580 430 3.000
2653257 DVI-28L 2800 2050 1:5,5 straight 3/4 1 106 146 83 199 550 410 4.100
OPTIONAL ACCESSORIES:
Code No. Description 0

2653303 RL-DVI20 * Reaction arm L-form straight for DVI20, 1“ 1.200
2653338 RL-DVI28 * Reaction arm L-form straight for DVI28, 1“ 1.700
173
TORQUE MULTIPLIERS
TOOLS

DVV-40Z, DVV-40ZRS - DVV-540RS
1/2" or 3/4" input square.

Convenient: Integrated RS
anti-wind-up ratchet for safe
working. Bi-directional (apart
from model DVV-40Z). Overload safety mechanism: Non-destructive
overload safety mechanism - Slipper - filed
as a patent. Triggers overload at 10% and
then clicks into place again. Clockwise and
anti-clockwise.
Lightweight and slim:
High-performance aluminium
housing is 30% lighter than a
steel one.
A ceramic and teflon coating of the tooth flanks
constantly lubricates the gear with a minimal
grease.
Low backlash, 2-stage planet

gear for a long service life.
A Z-form forged reaction arm of chrome

Stable, shuttle-impacted vanadium steel absorbs any arising coun-
gear housing. ter-force. Optional: L-form reaction arm on
request.
Flexible: With detachable

Z-form reaction arm, can be
optionally retrofitted with L-form
reaction arm and adjustable
reaction square.
A 1", 1.1/2" or 2.1/2" output square with

drill hole for impact sockets with safety
pin and ring.
100% quality check

› Delivery includes factory test certificate. Se 9
› The most common input/output torques M od

M rien-
No. D V 0 7.
00
00 6
1:
1
·m
To ax. el 2 0N f
·f t
rq Inp 011 Ratio 00 lb

on the torque multiplier. ue ut
3 00
N·m Max. O u t p ut 4 3 0
29
220 l Torqu e
bf·f t
1:16 1:18 1:22 1:28.5 1:39 1:175

4.000Nm 6.000Nm 8.000Nm 10.000Nm 13.000Nm 54.000Nm
174
DVV-40Z & DVV-40ZRS
4000Nm / 2930lbf·ft

› Machinery and plant engineering.
› Cable cars, lifts and masts.
› Heavy industry, construction sites.
› Bridge construction.
› Ship building, aircraft and railway construction.
› Refineries, plastics industry.
› Power plants of all kinds.
Features:
and loosening.
› With a two-stage planet gear.
› Torque multiplication ratio: 1:16. DVV-40Z
› DVV-40ZRS model with anti-wind-up ratchet (RS).
› With non-destructive Slipper overload safety mechanism
for gear protection - clockwise and anti-clockwise.
› Z-form, offset reaction arm depending on model made of Chrome Vanadium steel.
› Can be optionally retrofitted with L-form straight reaction arm -
with adjustable reaction arm - of lightweight metal.
› 2 models for a maximum load of around a maximum 4000Nm.
› Output square drive with a drill hole for sockets or
impact sockets with safety pin and ring.
Scope of delivery:
› With Z-form offset reaction arm.
› Detailed technical information is available on request
DVV-40ZRS
A
Q
a
Cmin.
Cmax.
„ „
$ $
2653087 DVV-40Z 4000 2930 1:16 1/2 1 88 212 71 136 250 256 300 220 5.400
2653109 DVV-40ZRS 4000 2930 1:16 1/2 1 88 227 71 136 264 270 310 230 5.700
2653184 RL-DVV40 * Reaction arm L-form straight for DVV40, 1“ 88 212 86 234 1.700
175
TORQUE MULTIPLIERS
TOOLS
DVV-60ZRS - DVV-130ZRS
6000-13000Nm / 4400-9530lbf·ft

› Machinery and plant engineering.
› Cable cars, lifts and masts.
› Heavy industry, construction sites.
› Bridge construction.
› Ship building, aircraft and railway construction.
› Refineries, plastics industry.
› Power plants of all kinds.
Features:
› Mechanical hand torque multiplier for controlled screw
tightening and loosening.
› With a two-stage planet gear.
› Torque multiplication ratio: 1:18, 1:22, 1:28.5, 1:39.
› All models with anti-wind-up ratchet (RS).
for gear protection - clockwise and anticlockwise.
› Z-form, offset reaction arm depending on model made of Chrome Vanadium steel.
› Can be optionally retrofitted with L-form straight reaction arm
- with adjustable reaction arm - of lightweight metal.
› 4 models for maximum load between 6000Nm and maximum 13000Nm.
› Output square drive with a drill hole for sockets or
impact sockets with safety pin and ring.
Scope of delivery:
› Torque Multiplier DREMOPLUS ALU
› With Z-form offset reaction arm
› Delivery in sturdy shipping case with foam insert
› Factory test certificate and setting table
› Detailed technical information is available on request
A
Q
a
Cmin.
Cmax.
„ „
$ $
2653117 DVV-60ZRS * 6000 4400 1:18 3/4 1.1/2 102 257 110 190 316 324 400 300 10.500
2653125 DVV-80ZRS * 8000 5870 1:22 3/4 1.1/2 128 277 110 190 338 342 420 310 13.400
2653133 DVV-100ZRS * 10000 7330 1:28,5 3/4 1.1/2 142 292 120 216 350 356 410 305 13.900
2653141 DVV-130ZRS * 13000 9530 1:39 3/4 1.1/2 175 306 (126) (229) (372) (379) 380 280 20.900

2654091 RL-DVV60-80 * Reaction arm L-form straight for DVV60-80, 1.1/2“ 102/128 256,2/276,5 120/120 315/315 4.000
176
DVV-540RS
54000Nm / 40330lbf·ft

› Heavy industry.
› Oil industry.
› Petrochemicals.
Features:
› Mechanical hand torque multiplier for controlled screw tightening and loosening.
› With a three-stage planet gear.
› Chrome Vanadium steel reaction arm.
› Multiplication at the ratio of 1:175.
› With anti-wind-up ratchet (RS).
for gear protection - clockwise and anti-clockwise.
› With fixture for welding on a reaction arm (optional).
› 1 model for a maximum load of around a maximum 54000Nm.
› Output square drive with a drill hole - for sockets or impact sockets with a safety
pin and ring.
Scope of delivery:
› Delivery in a sturdy crate on pallet.
› Setting table.
› Detailed technical information is available on request.

„ „
Code No. < max. < max. g Q C a D A B ; max. ; max. 0
$ $
2653168 DVV-540RS * 54000 40330 1:175 3/4 2.1/2 270 415 380 280 64.500
SPECIAL REACTION ARMS AS WELL AS TECHNICAL ADVICE CAN BE

OBTAINED ON REQUEST.
› Please contact us with any queries and for advice.

› Your query is our priority.
177
PULLERS
178 - 187
178
PULLERS
UNIVERSAL PULLERS HSP SPINDLES SAFETY COVER

180 182 183
NUT SPLITTERS STUD EXTRACTORS SPECIAL PULLERS

183 183 184
EXTRACTOR SETS PULLER KITS PEGBOARD KITS

185 185 186
PULLERS
Universal Pullers
8220 8220P
TWIN GRIP PULLERS 8220-20HSP
› For the safe and fast removal of discs, pulleys, wheels, ball bearings etc.
› Strong drop forged design.
› Reversible hooks permit use as an internal or external puller.
› Available in standard length or with extensions for extra length.
8220-20
*WHILE STOCKS LAST
Code No Running Depth Max. Opening 0 Code No Running Depth Max. Opening 0
040150 8220-10 105 110 1.200 040460 8220-20HSP1 Puller & Spindle * 90 180 3.600
040180 8220-20 160 180 3.100 040470 8220-30HSP3 Puller & Spindle * 100 280 9.900
040210 8220-30 * 210 280 8.500 040480 8220-20L HSP1 Puller & Spindle * 90 180 5.100
040160 8220-10L 200 110 1.800 040490 8220-30L HSP3 Puller & Spindle * 100 280 13.100
040190 8220-20L 310 180 4.500
040220 8220-30L * 410 280 11.600
Code No y 0
040170 8220-10P 151 0.900
040200 8220-20P 220 2.00
040230 8220-30P 308 5.00
8562 8563
TWIN GRIP PULLERS TRIPLE GRIP PULLER
› For removing small parts such as battery terminals, pulleys, wheels, ball bearings etc. › For removing small parts such as battery terminals, pulleys, wheels, ball bearings etc.
040427 8562-1 50 60 0.200 040417 8563-1 55 60 0.310
040428 8562-2 70 70 0.220
180
8564 8565
TWIN GRIP PULLERS TRIPLE GRIP PULLERS
*WHILE STOCKS LAST

040010 8564-2 100 110 1.000 040020 8565-2 80 120 1.300
040030 8564-3 140 150 1.900 040040 8565-3 140 160 2.500
040050 8564-4 200 200 2.300 040060 8565-4 200 220 4.000
040440 8564-4 HSPIL Puller & Spindle * 105 200 3.700 040450 8564-4 HSPIL Puller & Spindle 105 220 4.600
8566 8567
› Suitable for industrial purposes and heavy agricultural
as well as construction machines.
040070 8566-1 300 300 9.800 040090 8567-1 400 350 11.900
040080 8566-2 400 400 10.800 040100 8567-2 400 420 13.000
040495 8566-1 HSP3 Puller & Spindle * 105 300 10.100 040505 8567-1 HSP3 Puller & Spindle * 110 345 12.100
040500 8566-2 HSP3 Puller & Spindle * 110 370 11.100 040510 8567-2 HSP3 Puller & Spindle 110 350 13.300
8568 8569
› Heavy duty model for the removal › Heavy duty model for the removal
of discs, pulleys, wheels, ball of discs, pulleys, wheels, ball
bearings etc. bearings etc.
040110 8568-1 100 150 0.800 040120 8569-1 80 150 1.100
040130 8568-2 140 200 1.900 040140 8569-2 140 200 2.700
181
PULLERS
HSP GREASE HYDRAULIC PRESSURE SPINDLE

The grease hydraulic pressure spindle has been designed for controlled and safe extraction forces of up to 15t.
Preperation for use: Preperation for use:

› Before using, check whether the pressure spindle is screwed far enough out of the cap, › Place the puller into position and pre-tension the spindle body using a size 32mm or 41mm
so that the pressure pad is in the initial position in the hydraulic cylinder. wrench.
› Unscrew the cap from the spindle body. First slacken off the grub screw. › Screw the pressure spindle size 12mm or 17mm into the cap. The hydraulic process will come into
› Screw the spindle body into the crossbeam of the puller from below until the body protrudes play. The workpiece that has been loosened by the hydraulic force may be pulled off completely by
approximately 60mm from the crossbeam. turning the spindle body with the 32mm or 41mm cap.
› Screw the cap onto the spindle body until it stops and then fix it in position by turning in the grub › After use, the pressure spindle (size 12mm or 17mm) is turned back into its initial position and the
screw. pressure pad is pushed into the hydraulic cylinder.
2 3 4
1 Hydraulic bolt
Grub screw
Adjusting cap nut
Hydraulic
spindle
5 6
Tip
Ball Ø 9/16“
or 5/8“
1.15 HSP
TRIPLE GRIP PULLERS GREASE HYDRAULIC
› Heavy duty model for the removal of discs, pulleys, PRESSURE SPINDLES
wheels, ball bearings etc.
› The grease hydraulic pressure spindle has been designed for controlled and safe pulling work and is
set up for a pressure of up to 15t.
*WHILE STOCKS LAST

Code No Running Depth Max. Opening 0 Code No Force Capacity Puller Ref. 0
8006190 1.15/1 140 130 1.200 040350 HSP1L * 6-ton - Twin Grip 8564-4 1.300
10-ton - Triple Grip 8565-4
8006350 1.15/2 210 200 3.300
040360 HSP1 6-ton - Twin Grip 8220-20 1.200
8220-20L
040400 HSP3 * 8-ton - Twin Grip 8220-30 3.300
12-ton - Twin Grip 8220-30L
15-ton - Triple Grip 8566-1
8566-2
8567-1
8567-2
182
Special Tools
5.10 1.26/HYD
SAFETY COVER NUT SPLITTERS
hydraulic
› At pulling forces of 18t, these PVC safety covers provide maximum active safety
protection from suddenly detaching ball bearings, driving pinions or small parts.
The safety covers are extremely flexible, making them suitable for all applications. › With strong chisel, additionally induction › Channel walls rolled, thus mirror-smooth and
› Dimensions 510 x 915mm. hardened. wear resistant.
› Double-ply welded = double safety (total thickness at 0.5mm = 1.0mm). › At the cutting edge for breakage resistance. › For nuts up to property class 10.
› Tear strength: longitudinal 23N/mm2 - lateral 21N/mm2. › The chamfer at the chisel's edge improves the › Chisel replaceable.
› Two straps for variable adjustment. splitting effect and prevents breakage. › For splitting jammed or stripped nuts without .
› Press stud fasteners for added safety - no flapping ends. › With smooth chisel function. damaging the bolt thread.
› UV resistant.
› Temperature resistant at -25 °C to +50 °C.
› Supplied in a carry bag which guarantees a long service life.
1.26/1 HYD
1.26/2 HYD
*WHILE STOCKS LAST
Code No 0 Code No for nuts $ max. t 0

1868195 5.10 * 1.500 040790 1.26/1 7-22 mm, M4-M14 12 5.0 0.800
040870 1.26/2 22-36 mm, M14-M24 12 13.0 3.400
8600 1.30/N
STUD EXTRACTORS INTERNAL EXTRACTORS
› For inserting and removing studs. with reinforced shoulder
› Suitable for extremely short stud ends.
› For extremely tightly packed ball bearings,bearing races, bushes,
shaft seals and circlips.
› The shoulder of the shell jaw must be applied behind the bearing.
*WHILE STOCKS LAST
Code No Ø-Stud 0 Code No C p $ 0

041010 8600-1 4-10 0.290 8012750 1.30/0 * 5-8 M10 10 0.120
041020 8600-2 8-25 0.570 8012830 1.30/1 * 8-12 M10 10 0.120
8012910 1.30/2 * 12-15 M10 10 0.130
8013130 1.30/3 * 15-19 M10 14 0.170
8013480 1.30/4 * 19-25 M10 14 0.200
8013560 1.30/4A * 25-30 M10 14 0.300
8013640 1.30/5 * 30-35 M10 14 0.400
8013720 1.30/6 * 35-45 M14 x 1,5 17 0.650
183
PULLERS
1.36 1.40
SUPPORT BRACE SEPARATORS
› Operation: The counter-support brace is placed on › For removing taper roller and ball bearings, inner
the housing and the spindle screwed onto the spindle bearing races and other tightly-seated or thin-
of the internal extractor. The toggle is held firmly and walled parts.
the bearing extracted by tightening the nut. › Operation: The sharp edges of the separator
blades are pressed behind the part and it is then A
withdrawn using the 1.38 puller.
› To avoid damage to delicate parts, the flat surfaces
of the separator are used.
› This produces a large support surface that prevents
deformation.
C
Code No AO For puller C 0

8019680 1.40/0 5-60 1.38/0 M10 1.100
Code No $ p 0 8019760 1.40/1 12-75 1.38/1 M10 3.600
8016580 1.36 / 1 27 M10 0.750 8019840 1.40/2 22-115 1.38/2 M14x1,5 2.300
8016660 1.36 / 2 32 M14 x 1,5 1.650 8019920 1.40/3 30-155 1.38/3 M18x1,5 4.400
1.38 1.67
SEPARATOR PULLERS STEERING WHEEL PULLER
› These separator pullers are used together with the for cars
bearing separators 1.40.
› The tension bolts are screwed into the threaded
holes in the bearing separators.
› Contains 1 pair of short legs, 1 pair of long legs and a protective
cap for the thread of the steering column.
Code No For separator a b $ 0

8017550 1.38/0 1.40/0 40-120 125 17 1.000
8017630 1.38/1 1.40/1 60-165 180 19 1.100
Code No Leg length up to Clamping reach $ 0
8017710 1.38/2 1.40/2 70-215 195 22 3.400
8017980 1.38/3 1.40/3 90-300 205 27 6.500 8028240 1.67/1 135 35-90 17 0.900
8551 1.73
BOLT EXTRACTOR SET UNIVERSAL BALL JOINT PULLER
› Made from Chrome Vanadium steel-35HRC. › For removing ball joints on cars.
› In sturdy plastic case.
Operation
› Drill a central hole into the broken bolt.
› Turn the bolt extractor to the left into the hole until it
grips and removes the bolt.
› Always use the maxiumum extractor size.
Code No 0 Code No Clamping height Fork Depth O 0

6759890 8551-88 Bolt Extractor Set 0.724 8030810 1.73/1 65 24 23 0.730
Sizes 12345678
184
1.85/1 Puller Kits
PROFESSIONAL PLASTIC
1100-1.04
BEARING INSTALLATION SET
UNIVERSAL PULLER SET
› Sturdy plastic bearing installation set. occured when working ‘metal to metal’.
› Impact resistant plastic is light but as robust › Ensures no deformations of the bearing in L-BOXX® 136
as metal variants. housings, sealing rings or shafts.
› This set guarantees that the installed bearings
will not suffer the damage that might have › Maximum capacity up to 5t.
› 2- and 3-arm cross-beam.
› With rigid and slim legs and extensions.
› 12 different pullers can be combined.
› External Ø up to 130mm, internal Ø up to 170mm with a
200mm clamping reach.
› 1100 CT2-1.04 to retrofit existing L-BOXX®es 136.
Code No. Contents 0

2838362 1100-1.04 L-Boxx® 136 no. 1100L 6.300
+ Assortment no. 1100 CT2-1.04
*WHILE STOCKS LAST
Code
1120778
No.
1.85/1 *
Contents
33 impact rings, 10-50mm for external Ø 26-110mm
0
5.200
1.07/K
3 aluminium impact sleeves
1 recoil-free bodywork hammer with nylon heads (1.2kg) PULLER SET
with 9 legs
1101-1.29/3K › In plastic case.

› Dimensions: 120 x 250mm.
BALL BEARING EXTRACTOR SET
› Ball bearing extractor set for more than 40 ball › With Check-Tool insert.
bearings. › Insert for use in drawers with minimum
› For removing ball bearings that are both dimensions 340 x 260 x 60mm.
on a shaft and in a housing. › In GEDORE i-BOXX® 72 No. 1101 L. Code No. Contents max.t A $ 0
› Non-destructive removal of deep-groove ball › Dimensions: 367 x 316 x 72mm. 8117340 1.07/K 2-arm Cross Piece 2.5 M 14x1,5 x 140 17 5.800
bearings without dismantling the shaft; no need 3-arm Cross Piece
to drill open the bearing cage (no chippings). 3 x Pulling Hooks - 100mm
3 x Pulling Hooks - 200mm
3 x Slim Pulling Hooks - 250mm
1.31
INTERNAL EXTRACTOR SET
› For extremely tightly packed ball bearings,
bearing races, bushes,
shaft seals and circlips.
*WHILE STOCKS LAST
Code No. Contents For ball bearing No. 0

2964392 1101-1.29/3K * 4 Heads with spindle no. 6000 6001 6002 6003 6004 5.800
1.29/1-1.29/5 6005 6006 6007 6008 6009
7 Heads with spindle no. 6010 6011 6012 6200 6201
1.29/10-1.29/45 6202 6203 6204 6205 6206
1 Handle no. 1.29/0 6207 6208 6209 6210 6211
6212 6213 6300 6301 6302
6303 6304 6305 6306 6307 Code No. Contents 0
6308 6309 6310 6311 6403 8014610 1.31/1 6 internal extractors 12-46mm, No. 1.30/2 - /6 6.400
6404 6405 6406 6407 2 counter-support braces No. 1.36/1 - /2
185
PULLERS
2.20
TRUCK WORKSHOP KIT
› Clearly arranged modular system on pegboard.
Code No. Contents 0

1088718 2.20LKW 2-arm Cross Piece - 260mm 25.000
3-arm Cross Piece - 260mm
3 x Slim Pattern Pulling Hooks - 220mm
Spindle
Hydraulic Pressure Spindle
Bearing Separator
2.30
INDUSTRIAL PULLER KIT
› For the assembly of 1.06 and 1.07 pullers.
Code No. Contents 0

1393014 2.30 4 x 2-arm cross pieces 140 180 220 260mm 19.600
4 x 3-arm cross pieces 140 180 220 260mm
2 x Spindles
6 x Pulling Hooks
2.40
CONSTRUCTION MACHINE KIT
› For the assembly of 1.14 and 1.15 pullers.
Code No. Contents 0

1393030 2.40 2 x 2-arm Heads 24.900
2 x 3-arm Heads
2 x Spindles
186
INDUSTRIAL KIT CAR WORKSHOP KIT
› Clearly arranged modular system on pegboard. › Clearly arranged modular system on pegboard.
*WHILE STOCKS LAST

634840 Industrial Puller Kit * 8220-20 Universal Twin Grip Puller 19.600 634859 Car Workshop Puller Kit 8220-10 Universal Twin Grip Puller 13.600
8220-20P Extension 8220-10P Extensions
8565-4 Triple Grip Puller 8562-2 Battery Terminal Puller
HSP 1 Hydraulic Pressure Spindle 8565-2 Triple Grip Puller
8569-2 Universal Triple Grip Puller 8569-1 Universal Triple Grip Puller
8600-2 Stud Extractor 8600-2 Stud Extractor
248 ST Recoil Free Hammer 1.38-0 Separator Puller
1450S Tool Panel (Including Hooks) 1.40-0 Bearing Separator
1.73-1 Ball Joint Puller
1.75-1 Oil Filter Hook
248 ST Recoil Free Hammer
1450S Tool Panel (Including Hooks)
SAFETY NOTES
PULLERS
› Read the operating instructions! › Before pulling, ensure that the legs are in contact with the part to be pulled and are firmly
› Use only original spare parts and accessories for your Gedore puller. Never use worn, modified or tightened so that the spindle operates centrally along the axis of the puller.
defective spare parts or accessories. › Attention! When using a puller, forces of up to several tons are generated! Take care to ensure
› Wear goggles and protective clothing when working. For added safety, use the Gedore safety that the puller is correctly positioned and is vertical to the component being pulled.
cover 5.10! › Do not use electric or pneumatic power or percussion drivers.
= > > >
187
NON-SPARKING
TOOLS
188 - 193
188
NON SPARKING
TOOLS
SPANNERS / SETS (1/2”) SOCKETS (1/2”) ACCESSORIES

190 191 191
(1/4”) SOCKET SET SCREWDRIVER SET PIPE WRENCH

192 192 193
ADJUSTABLE WRENCH COMBINATION PLIERS SIDE CUTTERS

193 193 193
NON-SPARKING TOOLS
Non-Sparking Combination Spanners
GED0130
› With same size on each end.

› Bi-hexagon ring.
Code No. ! y 0 Code No. ! y 0

2510855 GED0130006S 6 130 0.050 2509032 GED0130019S 19 230 0.330
2510847 GED0130007S 7 130 0.055 2509024 GED0130020S 20 230 0.325
2510839 GED0130008S 8 135 0.0 55 2509016 GED0130021S 21 250 0.360
2510820 GED0130009S 9 150 0.0 95 2509008 GED0130022S 22 250 0.355
2509148 GED0130010S 10 150 0.085 2508990 GED0130023S 23 250 0.350
2509121 GED0130011S 11 150 0.0 90 2508982 GED0130024S 24 270 0.500
2509113 GED0130012S 12 190 0.170 2508974 GED0130025S 25 270 0.475
2509105 GED0130013S 13 190 0. 165 2508966 GED0130026S 26 270 0.470
2509091 GED0130014S 14 190 0. 160 2508958 GED0130027S 27 280 0.665
2509083 GED0130015S 15 210 0.230 2508923 GED0130028S 28 280 0.680
2509075 GED0130016S 16 210 0.230 2508915 GED0130029S 29 280 0.630
2509067 GED0130017S 17 210 0.220 2508907 GED0130030S 30 300 0.730
2509040 GED0130018S 18 230 0.330 2508893 GED0130032S 32 300 0.650
GED0130
› Sets made up of the most popular sizes.
Code No. Contents 0

2493551 GED0130003S-11 Pieces 8 10 11 12 13 14 16 17 18 19 22 2.200
2493578 GED0130001S-12 Pieces 10 11 12 13 14 17 19 22 24 27 30 32 4.100
WHY THE NEED FOR NON-SPARKING TOOLS?

The recommendation is to use GEDORE non-sparking tools in all areas where there are combustible or easily ignitable vapours, liquids and dusts as well as where sparks can potentially cause
a fire or explosion.
› Made either from proven, low-sparking special bronze and copper/beryllium › Using non-sparking tools must not be the only protective measure taken in
alloys or from other non-spark inducing materials. aeas of fire or explosion risk.
› The spanners are cast and not forged for your own safety. › It would be more accurate to refer to ‘low spark’ since ignitable sparks cannot
› Corrosion resistant, even against salt water. be 100% prevented with the use of non-sparking tools.
› Copper/beryllium tools are non-magnetic.
› Non-sparking tools are not as hard as conventional ones and must be used
with care.
190
Non-Sparking Sockets & Accessories 1/2“
GED035
HEXAGON SOCKETS 1/2“
› Hand operated.
Code No. ! y 0 Code No. ! y 0

2496518 GED0350612S 6 40 0.050 2523396 GED0351912S 19 40 0.085
2496488 GED0350712S 7 40 0.055 2523361 GED0352012S 20 40 0.095
2496437 GED0350812S 8 40 0.050 2523353 GED0352112S 21 40 0.100
2496410 GED0350912S 9 40 0.050 2523337 GED0352212S 22 40 0.110
2523795 GED0351012S 10 40 0.050 2523302 GED0352312S 23 40 0.120
2523671 GED0351112S 11 40 0.050 2517965 GED0352412S 24 40 0.125
2523523 GED0351212S 12 40 0.050 2523280 GED0352512S 25 40 0.130
2523507 GED0351312S 13 40 0.050 2523264 GED0352612S 26 40 0.145
2523485 GED0351412S 14 40 0.055 2523248 GED0352712S 27 40 0.150
2523469 GED0351512S 15 40 0.055 2523213 GED0352812S 28 40 0.175
2523442 GED0351612S 16 40 0.060 2523183 GED0352912S 29 40 0.185
2523434 GED0351712S 17 40 0.065 2523167 GED0353012S 30 40 0.195
2523426 GED0351812S 18 40 0.075 2523140 GED0353212S 32 42 0.240
GED0360 GED042
REVERSIBLE RATCHET 1/2 EXTENSIONS 1/2
› For hand operated sockets. › For hand operated sockets.

2513684 GED0360012C 250 0.590 2506335 GED0420002S 100 0.180
2506270 GED0421434S 200 0.315
2506319 GED0420121S 250 0.360
GED410 1B COMBINATION SPANNERS 6
SWIVEL HANDLES 1/2

› For hand operated sockets.
Code No. y 0
2507927 GED0410013S 250 0.560
2507897 GED0410016S 300 0.920
191
NON-SPARKING TOOLS
GED0400 GED0400
SLIDING T-BAR 1/2 UNIVERSAL JOINT 1/2
› For hand operated sockets. › For hand operated sockets.
Code No y 0 Code No y 0
2511886 GED0400114S 250 0.450 2514788 GED0400118S 70 0.135
GED0430 GED080
SOCKET SET 1/2 SCREWDRIVER SET
5 pieces
› In plastic case. › Picture may differ from actual product.
› Picture may differ from actual product.

2503239 GED0430002S Reversible Ratchet 1/2” 4.100 2499061 GED0800002C 4,5x100mm 0.515
Extension 1/2” 150mm 6x100mm 6x150mm
Sliding T-bar 1/2” 320mm 8x150mm
PH1 PH2
Swivel handle 1/2” 380mm
Sockets: 10 11 12 13 14 15 16 17 18 19
2 0 21 22 23 24 25 26 27 28 29 30 32mm
192
Non-Sparking Wrenches/Pliers
GED053 GED048
PIPE WRENCH ADJUSTABLE WRENCHES
› American pattern.
2517310 GED0530385S 385 1.370 2503166 GED0482000C 200 0.200
2503158 GED0482500C 250 0.400
2503131 GED0483000C 300 0.700
GED060 GED066
COMBINATION PLIERS POWER SIDE CUTTERS
› With two-component handle. › With two-component handle.
2514753 GED0602000C 200 0.425 2522659 GED0662650C 190 0.290
193
APPRENTICE
TOOLKITS
194 - 203
APPRENTICE
TOOLKITS
CONSTRUCTION MACHINERY MECHANIC‘S / AUTOMOTIVE

196 198-199
ELECTRICIAN‘S & REFRIGERATION APPRENTICE TRUNK

MECHANIC‘S 201
200
APPRENTICE TOOLKITS
CONSTRUCTION b
MACHINERY TOOLKIT c
For construction apprentices and tradesmen.
d
e
Code No. 0
668119 Construction Machinery Toolkit 145.53
1525 Tool Trolley 8000-J2 95-125, 150, 175

Circlip Pliers Flat Chisel
1425 Tool Chest 8250-200 JC 116

Combination Pliers Pin Punch Set
Foam Inserts 1525-41-1B 8132-200 JC 4550-20

1525-41-400 1525-41-403 Telephone Pliers Torque Wrench
1525-41-4550 1525-41-D32
1525-41-8601 1525-27-62 8316-200 JC 702-21M
1525-27-PH 1525-27-PL Side Cutters Feeler Gauge Set
62P 150, 450mm
8531-250 R93000006
Adjustable Wrenches
Tin Snips Key File Set
145-10C
8601-500, 900 R9455-05
Universal Pliers
Ball Pein Hammers Tape Measure - 5m
137-250
248-ST Scriber-MS/ST-190mm
Grip Pliers
Reccoil Free Hammer
8000-A2 R9250 Digital Multimeter

Circlip Pliers Rubber Mallet
196
Caliper-Vernier -150x0.02mm 3287 IKS 20 PZ Sockets-PZ 1,
Sliding T-bar PZ 2, PZ 3
File Thread Restorer 3293-U1 R4255 Allen Key Sockets-3, 4, 5,

Reversible Ratchet 6, 8, 10
403 3296 IKS 20 PH Sockets-PH 0, PH 1,

Hacksaw Swivel Handle PH 2, PH 3
3081 R4510-50, 150mm R4120 Female Torx-E5, E6, E7,

L-Handle Extensions E8, E10
3090-125, 250 R45200022 ITX19 Sockets-T20, T25, T27, T30,

Extensions Slidng T-bar T40, T45, T50
3019 R45300005 TX19 Sockets-E10, E12

Adapter Universal Joint
3095 R40000027 TX30 Sockets-E5, E6, E7, E8

Universal Joint Reversible Ratchet
3087 R4100 Sockets-4, 4.5, 5, 5.5, 6, 7, 8, IN19 Sockets-5/16 AF, 3/8 AF, 1/2 AF,
Sliding T-bar 9, 10, 11, 12, 13, 14 9/16 AF, 5/8 AF
3093-Z94 D30 Sockets-8, 9, 10, 11, 12, 13, 14, 1B Combination Spanners-6, 7, 8,
Reversible Ratchet 15, 16, 17, 18, 19, 20, 21, 7/16 AF, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18,
9/16 AF, 7/8 AF 19, 20, 21, 22, 23, 24, 25, 26, 27, 28,
1995 C19 Sockets- 8-5/16, 10-3/8, 11, 29, 30, 32
Universal Pliers 12, 13-1/2, 14, 15-19/32, 16-5/8,
17, 18-11/16, 19-3/4, 21-13/16, 22,
1990-75,125,250 24-15/16, 26-1., 27-1.1/16, 29-1.1/8, 1.1/4AF, 1.5/16AF, 1.3/8AF, 1.1/2AF,
Extensions 30-1.3/16, 32-1.1/4 1.1/8 AF, 1.1/16 AF
1985 D19 Sockets- 5/16 AF, 3/8 AF, 7/16 1B13A-1/4AF, 5/16AF, 3/8AF, 7/16AF,
Speed Brace AF, 1/2AF, 9/16 AF, 5/8 AF, 11/16 AF, 1/2AF, 9/16AF, 5/8AF, 11/16AF, 3/4AF,
3/4 AF, 13/16 AF, 7/8 AF, 15/16 AF, 1 13/16AF, 7/8AF, 15/16AF, 1AF
1987 AF, 1.1/16 AF, 1.1/8 AF 400 Flare Nut Spanners-17x19,
Sliding T-bar 22x24, 7/16x1/2, 9/16x5/8, 5/16x3/8
1997-375 C32 Sockets-19-3/4, 22-7/8, 24- 42L-9M Long Allen Keys Set-1.5, 2,
Swivel Handle 15/16, 26-1, 27-1.1/16, 29-1.1/8, 30- 2.5, 3, 4, 5, 6, 8, 10
1.3/16, 32-1.1/4, 33-1.5/16, 38-1.1/2,
1993-U10T 41-1.5/8, 46-1.13/16, 50-2 42-9P Allen Keys Set-1/16”, 5/64”,
Reversible Ratchet 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”,
3/8”
3295 D32 Sockets-1.3/8 AF, 1.7/16 AF, 2150 3C Screwdriver
Universal Joint 3/4” 1.11/16 AF, 1.3/4 AF, 1.7/8 AF 4 6.5 10
3290-200, 400 R4245 Male Torx-T10, T15, T20, T25, 2160 3C Screwdriver
Extensions T27, T30, T40 PH1 PH2 PH3
197
APPRENTICE TOOLKITS
MECHANIC‘S d
TOOLKIT
For diesel, forklift, motor, tractor, motorcycle, diesel fuel
injection mechanic, diesel fitter apprentices and tradesmen.
Code No. 0
668036 Mechanic’s Toolkit 41.50
1410 Tool Chest Round File-250 1985

Feeler Gauge Set
D19 Sockets- 8, 10, 11, 12, 13, 14, Half-Round File-250 1987
15, 16, 17, 19, 21, 22, 23, 24, 26, 27, Speed Brace
28, 30, 32
1B Combination Spanners-6, 7, 8, 100-16 1990-125, 250
9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, Centre Punch Extensions
20, 21, 22, 24
534 Swivel Head Spanners-10, 11, 95-175, 200 1995
12, 13, 14, 15, 16, 17, 19 Flat Chisel Universal Joint
62P 200, 300mm Stainless Steel Ruler-300mm 50-20,8mm

Adjustable Wrenches Spark Plug Socket
8601-100, 700 Engineer‘s Square-100mm 54-16mm

Ball Pein Hammers Spark Plug Socket
248-ST Engineer‘s Scriber 190mm

Recoil Free Hammer
42-88M-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10 702-21M

Allen Keys Set Feeler Gauge Set Optional Extras
42-88P-3/32”, 1/8”, 5/32”, 3/16”, 403 95-300 Flat Chisel
7/32”, 1/4”, 5/16”, 3/8” Hacksaw Code: 8699370
Allen Keys Set 0 0.560
116 8000-A2 R94420021 Vernier
Pin Punch Set Circlip Pliers Code: 3301430
0 0.320
2160 8000-J2 R9455-05 Tape Measure
PH1 PH2 Circlip Pliers Code: 3301428
0 0.200
2150 8132-200 JC 227-350 Pipe Wrench
4 5.5 6.5 8 10 Telephone Pliers Code: 645346
0 1.62
8531-250 8250-200 JC Suction Lifter-19mm
Tin Snips Combination Pliers Code: 0120130
0 0.020
36/1 8316-200 JC Suction Lifter-22mm
Oil Filter Wrench Side Cutters Code: 0120120
0 0.020
Safety Glasses 145-10C Circuit Tester
Universal Pliers Code: 0120100
0 0.040
10pc Drill Bit Set 137-250 Tyre Pressure Gauge
Grip Pliers Code: 0120110
0 0.120
Thread Restorer Oil Can-300 400-5M Flare Nut Spanner Set
Code: 634026
0 0.710
Flat File-250 1993-Z94 INX19 PM-5D Allen Key Socket Set
Reversible Ratchet Code: 617989
0 1.32
198
AUTOMOTIVE ELECTRICIAN‘S b
TOOLKIT d
Code No. 0
668028 Automotive Electrician’s Toolkit 35.50
1410 Tool Chest 8250-200 JC Needle File Set-6 Piece

Combination Pliers
1B Combination Spanners-6, 7, 8, 8316-160 JC

9, 10, 11, 12, 13, 14, 15, 16, 17, 18, Side Cutters
19, 20, 21, 22
R49003046-46 Piece 1/4” Socket Set 8132AB-160 TL
Telephone Pliers
145-10C
Universal Pliers Optional Extras
Tube Spanner Set-8x9, 10x11, 62P 200 95-300 Flat Chisel
12x13, 14x15, 16x17, 18x19 Adjustable Wrench Code: 8699370
0 0.400
26-RS2 Heavy Duty Crimping Pliers 95-200 Flat Chisel
To be used with Tube Spanner Set Code: 8698990
0 0.400
42-88M Allen Keys Set-2, 2.5, 3, 4, 8516-250 Junior Hacksaw
5, 6, 8, 10 Tin Snips Code: 3012000
0 0.100
42-88P Allen Keys Set-3/32”, 1/8”, Wire Stripper 134-250 Grip Pliers
5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8” Code: 745995
0 0.570
2160 Digital Multimeter R94420021 Vernier
PH1 PH2 Code: 3301430
0 0.320
2150 9534-05 Tape Measure
4 5.5 6.5 8 Code: 3301428
0 0.200
116 Stainless Steel Ruler-300 1985 Speed Brace
Pin Punch Set Code: 614335
0 0.585
100-10, 16 R93210000 50-20.8mm Spark Plug Socket
Centre Punches Heavy-Duty Utility Knife Code: 636614
0 0.119
8601-700 403 54-16mm Spark Plug Socket
Ball Pein Hammer Hacksaw Code: 636622
0 0.096
267-40 Safety Glasses 702-21M Feeler Gauge Set
Recoil Free Hammer Code: 6547950
0 0.070
Circuit Tester Engineer‘s Scriber D19HMZ Socket Set
Code: 614610
0 1.93
8132-160 JC Box Wrench Set-8 Piece 10pc Drill Bit Set
Telephone Pliers Code: 0120000
0 0.510
199
APPRENTICE TOOLKITS
ELECTRICIAN‘S & REFRIGERATION b

MECHANIC‘S d
TOOLKIT
Code No. 0
Electrician’s & Refrigeration Mechanic’s 38.50
668001
Toolkit
1410 Tool Chest 8316-200 JC Circuit Tester

Side Cutters
1B Combination Spanners-6, 7, 8, 8601-100, 700 95-100

9, 10, 11, 12, 13, 14, 15, 16, 17, 18, Ball Pein Hammers Flat Chisel
19, 20, 21, 22
R49003046-46 Piece 1/4” Socket Set 248-ST
Recoil Free Hammer
145-10C
Universal Pliers
D19HMZ 62P 200, 300

Socket Set Adjustable Wrenches
42-88M Allen Keys Set-2, 2.5, 3, 4, Heavy Duty Crimping Pliers

5, 6, 8, 10
42-88P Allen Keys Set-3/32”, 1/8”, Wire Stripper

5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”
2160 Digital Multimeter

PH1 PH2 Optional Extras
2150 95-200 Flat Chisel
4 5.5 6.5 8 Code: 8698990
0 0.400
116 Stainless Steel Ruler-300 Engineer‘s Square
Pin Punch Set Code: 0110200
0 0.133
100-16 R93210000 R94100051 Spirit Level
Centre Punches Heavy-Duty Utility Knife Code: 3301422
0 0.170
Flat File-250 403 227-350 Pipe Wrench
Hacksaw Code: 645346
0 1.62
Round File-250 Safety Glasses R94420021 Vernier
Code: 3301430
0 0.320
Half-Round File-250 Engineer‘s Scriber R9455-05 Tape Measure
Code: 3301428
0 0.200
8132-200 JC Box Wrench Set-8 Piece 8000-A2 Circlip Pliers
Telephone Pliers Code: 6701540
0 0.167
8250-200 JC 137-250 8000-J2 Circlip Pliers
Combination Pliers Grip Pliers Code: 6703400
0 0.146
200
APPRENTICE TRUNK d
TOOLKIT c
e
› 4x Sliding trays with high-density foam inserts.
Code No. 0
668109 Apprentice Trunk Toolkit 48.63
1460 Tool Trunk 4550-20 D19 Sockets 8, 10, 11, 12, 13, 14,
Torque Wrench 15, 16, 17, 19, 21, 22, 23, 24, 26, 27,
28, 30, 32
1B 6 ,7, 8, 10, 11, 12, 13, 14, 15, 16, 403 1997-450
17, 18, 19, 21, 22, 23, 24, 25, 26, 27, Hacksaw Power Bar
28, 29, 30, 32, 34, 36
8601-100 1987
Ball Pein Hammers Sliding T-Bar
1B 1/4, 5/16, 3/8, 7/16, 1/2, 9/16,
5/8, 11/16, 3/4, 7/8, 15/16, 1,
1.1/16, 1.1/8, 1.3/16, 1.1/4 D32-EMZ 1990 Extensions
3/4“ Socket Set 125, 250mm
8250-200 JC
Combination Pliers
8132-200 JC 2160
Telephone Pliers PH1 PH2
8316-200 JC 2150
Side Cutters 6.5 3-150 4-150 6.5-200
8000-A2 42KL-9M
Circlip Pliers 1,5 2 2,5 3 4 5 6 8 10
8000-J2 702-21M
Circlip Pliers Feeler Gauge Set
137-250 D30
Grip Pliers 6 7 8 9 10 11 12 13 14 15 16
17 18 19 21 22
145-10C 3081
Universal Pliers L-Handle
116 3090 Extension

Pin Punch Set 125mm
100-16 3093Z-94
Centre Punches Ratchet
Flat File-250 1993Z-94

Reversible Ratchet
201
APPRENTICE
CUSTOMISED TOOLKITS
GEDORE INDIVIDUAL
PRECISE – CUSTOMISED
Plastic references
High-density foam
Why not create your perfect tool assortment to match your

corporate design requests and your process specifications.
We look forward to hearing from you!
All assortments are packed in high-density foam inserts or

plastic references and will fit into an appropriate
compartment of the GEDORE tool chests, trolleys or
toolboxes.
Minimum quantities apply.
202
Custom colour choices
Tidy, uncluttered look and

always easily accessible
› Ready to be used straight after delivery: simply unpack and screw on the handle.
› Whether for mobile use or stationary, every tool has its place.
› Modular arrangement systems make daily routine that much easier (no more
scratching for tools).
› Compact tool assortments make for easy tool selection.
› Customised equipment/tool sets in module systems and/or trolleys/benches in
company design/colours.
ADVANTAGES:
› Easy assessment of what tools to buy.
› Spend less time ‘looking for tools’.
› Tidier workplace.
› Easy identification and easy access of the correct tool.
› Easily check whether the toolset is complete.
› Elimination of unnecessary tool purchases – no surplus
tool accumulation.
203
ARTISAN
TOOLKITS
204 - 211
204
ARTISAN‘S
TOOLKITS
ELECTRICIANS LIGHT ELECTRICIANS MEDIUM FARMER‘S

CURRENT CURRENT 208
206 207
GENERAL ARTISAN‘S TECHNICIAN‘S RUCKSACK ELECTRICIAN‘S

209 210 211
ARTISAN TOOLKITS
ELECTRICIAN‘S LIGHT CURRENT

TOOLKIT
Code No. 0
32.20
668110 Electrician’s Light Current Toolkit
1410 Tool Chest 8316-160 JC

Side Cutters
1B Combination Spanners-6, 7, 8, Universal Panel Key

9, 10, 11, 12, 13
62P 150 Digital Multimeter

Adjustable Wrench
42-88M Allen Keys Set-2, 2.5, 3, 4,

5, 6, 7, 8, 9, 10
60CP-250 Wire Stripper

Adjustable Wrench
2150 8601-500
6.5 3-150 4-150 6.5-200
2160 R9455-05 Tape Measure

PH1 PH2
145-10C 403
Universal Pliers Hacksaw
Junior Hacksaw R95300017

LED Torch
137-250 R9321
Grip Pliers Utility Knife
8133-180 JC
Telephone Pliers
8250-200 JC
Combination Pliers
206
ELECTRICIAN‘S MEDIUM CURRENT
TOOLKIT
Code No. 0
32.20
668113 Electrician’s Medium Current Toolkit
1410 Tool Chest VDE 8314-140 H

Side Pliers
1B Combination Spanners-6, 7, 8, Universal Panel Key

9, 10, 11, 12, 13
62P 150, 300mm Digital Multimeter

Adjustable Wrenches
42-88M Allen Keys Set-2, 2.5, 3, 4,

5, 6, 8, 10
Circuit Voltage Tester Wire Stripper
VDE 2133 Nut Drivers 8601-500

6, 7, 8, 9, 10, 11, 12, 13 Ball Pein Hammer
VDE 2160 R9455-05

PH1 PH2 Tape Measure
VDE 2170 403

3.5 4 5.5 6.5 Hacksaw
145-10C R95300017
Universal Pliers LED Torch
Junior Hacksaw VDE 4522

Cable Knife
137-250 Heavy-Duty Crimping Pliers

Grip Pliers
VDE 8132-160 H D19HMZ

Telephone Pliers Socket Set
VDE 8250-200 H
Combination Pliers
207
ARTISAN TOOLKITS
FARMER‘S
TOOLKIT
Code No. 0
32.40
668111 Farmer’s Toolkit
1335 Tool Box Leather Gloves 50-20.8

Spark Plug Socket
1B Combination Spanners-6, 7, 8, Digital Multimeter 95-250

9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, Flat Chisel
20, 21, 22, 24
62P 300 702-20M
Adjsutable Wrench Feeler Gauge Set
42-88M Allen Keys Set-2, 2.5, 3, 4, 8531-250 38-500

5, 6, 7, 8, 9, 10 Tin Snips Tyre Lever
403 8601-900 106

Hacksaw Ball Pein Hammer Chisel and Punch Set
2150 R9455-05 C19TMZ Socket Set 1/2“

4 5.5 6.5 8 Tape Measure
2160 Yale Padlock R9321

PH1 PH2 Utility Knife
145-10C R95300017 227-350

Universal Pliers LED Torch Pipe Wrench
Junior Hacksaw Fencing Pliers 8260-300
137-250 Flat File-250

Grip Pliers
8132-200 JC Round File-250

Telephone Pliers
8250-200 JC Half-Round File-250

Combination Pliers
8316-200 JC
Side Cutters
208
GENERAL ARTISAN‘S
TOOLKIT
Code No. 0
42.0
668112 General Artisan’s Toolkit
1410 Tool Chest Flat File-250 Engineer‘s Scriber
1B Combination Spanners-6, 7, 8, Round File-250 Safety Glasses

9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 24
62P 300 Half-Round File-250 Engineer‘s Square
Adjustable Wrench
42-88M Allen Keys Set-2, 2.5, 3, 4, 8601-700 116

5, 6, 8, 10 Ball Pein Hammers Pin Punch Set
8133-180 JC R9455-05 R49003046-46 Piece 1/4” Socket Set

Triple Pliers Tape Measure
2150 267-40
4 5.5 6.5 8 Recoil Free Hammer
2160 R95300017 Vernier

PH1 PH2 LED Torch
145-10C 8531-250 95-250

Universal Pliers Tin Snips Flat Chisel
403 50-20.8 100-16

Hacksaw Spark Plug Socket Centre Punch
137-250 C19HMZ Socket Set 1/2“

Grip Pliers
8132-200 JC 227-350
Telephone Pliers Pipe Wrench
8250-200 JC R9321
Combination Pliers Utility Knife
8316-200 JC Stainless Steel Ruler-300mm

Side Cutters
209
ARTISAN TOOLKITS
TECHNICIAN‘S RUCKSACK
TOOLKIT
Code No. 0
8.61
668120 Technician’s Rucksack Toolkit
Gedore Rucksack 8316-200 JC

Side Cutters
No.6 Open-Ended Spanners-6x7, R9321

8x9, 10x11, 12x13, 14x15, 16x17, Utility Knife
18x19, 20x22
62P-200 SRC-C19Z-10 Socket Set 1/2“
Adjustable Wrench
42-7M Allen Keys Set-2, 2.5, 3, 4,

5, 6, 8
2150 R95300017
6.5 3-150 4-150 6.5-200 LED Torch
2160 8601-500
PH1 PH2 Ball Pein Hammer
145-10C
Universal Pliers
Leather Gloves
8250-200 JC
Combination Pliers
210
ELECTRICIAN‘S
TOOLSET
Code No. 0
6.1
668122 Electrician’s Toolset
Electrician‘s Toolcase VDE 8132-200 H

Telephone Pliers
1B Combination Spanners-8, 10, VDE 8250-200 H

13, 17, 19 Combination Pliers
42-88M Allen Keys Set-2, 2.5, 3, 4, VDE 8314-160 H

5, 6, 8, 10 Side Cutters
Digital Multimeter VDE 8098-160 H

Stripping Pliers
8601-300
Ball Pein Hammer
VDE 2160 R9455-05

PH1 PH2 PH3 Tape Measure
VDE 2170 R95300017

4 5.5 6.5 LED Torch
145-10C VDE 4522

Universal Pliers Cable Knife
137-175 VDE 2133 Nut Drivers

Grip Pliers 4 6 8 10 13
62P
Adjustable Wrench
211
MERCHANDISERS
212 - 215
212
Merchandiser Concepts
1-2-3 MERCHANDISER
STAND CONCEPTS
THE PICTURES SHOWN ON THIS PAGE ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY DEPENDING ON CUSTOMERS’ REQUIREMENTS.
OPTION 1
1 STAND MERCHANDISER
Code
No. No. Code Opening
Opening order
Order Code No. Opening order Code No. Opening order
1B-6mm 600040C 1 D19 13mm 613355C 1 62 / 250mm 636827 1

1B-7mm 600059C 1 D19 14mm 613363C 1 137/250mm 640670 1
1B-8mm 600067C 1 D19 15mm 613371C 1 145 / 250mm 641200 1
1B-9mm 600075C 1 D19 16mm 613398C 1 225 / 250mm 645036 1
1B-10mm 600083C 1 D19 17mm 613401C 1 534 10mm 651206C 1
1B-11mm 600091C 1 D19 18mm 613428C 1 534 11mm 651214C 1
1B-12mm 600105C 1 D19 19mm 613436C 1 534 12mm 651222C 1
1B-13mm 600113C 1 D19 20mm 613444C 1 534 13mm 651230C 1
1B-14mm 600121C 1 D19 21mm 613452C 1 534 14mm 651249C 1
1B-15mm 600148C 1 D19 22mm 613460C 1 534 15mm 651257C 1
1B-16mm 600156C 1 42-88M 012104 1 534 16mm 651265C 1
1B-17mm 600164C 1 1985 614335C 1 534 17mm 651273C 1
1B-18mm 600172C 1 1987 614343C 1 534 18mm 651516C 1
1B-19mm 600180C 1 1990/75mm 614378C 1 534 19mm 651281C 1
1B-20mm 600199C 1 1990/125mm 614386C 1
1B-21mm 600202C 1 1990/250mm 614394C 1 1282-C19-1BMZ-PL-6SD 679232 1
1B-22mm 600210C 1 1993 Z/94 614459C 1
D19 8mm 613304C 1 1995 614475C 1
D19 9mm 613312C 1 1997/375 614491C 1
D19 10mm 613320C 1 D19 HMZ 614610 1
D19 11mm 613339C 1 36/1 6327320 1
D19 12mm 613347C 1 62 / 200mm 636819 1
MERCHANDISERS
CONCEPT OPTION 2
2 STAND MERCHANDISERS
Code No. Opening order Code No. Opening order Code No. Opening order
1B-6mm 600040C 1 IN19 7mm 615331C 1 2150 3-150 6680280C 1

1B-7mm 600059C 1 IN19 8mm 615358C 1 2150 4-150 6680360C 1
1B-8mm 600067C 1 IN19 9mm 615366C 1 2150 6.5-200 6680870C 1
1B-9mm 600075C 1 IN19 10mm 615374C 1 2153 5.5 1482432C 1
1B-10mm 600083C 1 IN19 12mm 615382C 1 2161 PH2 1531204C 1
1B-11mm 600091C 1 IN19 14mm 615390C 1 225 / 250mm 645036 1
1B-12mm 600105C 1 IN19 17mm 615404C 1 225 / 300mm 645044 1
1B-13mm 600113C 1 IN19 19mm 615412C 1 534 10mm 651206C 1
1B-14mm 600121C 1 42-88M 6349051 1 534 11mm 651214C 1
1B-15mm 600148C 1 42KL-9M 6351978 1 534 12mm 651222C 1
1B-16mm 600156C 1 43TX-09 6360959 1 534 13mm 651230C 1
1B-17mm 600164C 1 1985 614335C 1 534 14mm 651249C 1
1B-18mm 600172C 1 1987 614343C 1 534 15mm 651257C 1
1B-19mm 600180C 1 1990/75mm 614378C 1 534 16mm 651265C 1
1B-20mm 600199C 1 1990/125mm 614386C 1 534 17mm 651273C 1
1B-21mm 600202C 1 1990/250mm 614394C 1 534 18mm 651516C 1
1B-22mm 600210C 1 1993 U-10T 614262C 1 534 19mm 651281C 1
1B-23mm 600229C 1 1993 Z/94 614459C 1 1261 660876 1
1B-24mm 600237C 1 1995 614475C 1 MV-150mm 6500720 1
1B/04M 601152 1 1997/375 614491C 1 106 8725200 1
1B/17M 601268 1 1997/450 614556C 1 113 8753680 1
1B/26M 601276 1 D19 HMZ 614610 1 116A 8757670 1
D19 8mm 613304C 1 D19 TMZ 614831 1 4550 / 20 7601610 1
D19 9mm 613312C 1 28 PU 622761 1 S8000 6701030 1
D19 10mm 613320C 1 36/1 6327320 1 8132-200JC 6719670 1
D19 11mm 613339C 1 38/400mm 633267C 1 8250-200JC 6707310 1
D19 12mm 613347C 1 62 / 150mm 636800 1 8316-200JC 6745080 1
D19 13mm 613355C 1 62 / 200mm 636819 1 S8003JC 6701110 1
D19 14mm 613363C 1 62 / 250mm 636827 1 8380-250TL 6752100 1
D19 15mm 613371C 1 62 / 300mm 636835 1 8531/250mm 675792 1
D19 16mm 613398C 1 62 / 375mm 636843 1 8531/300mm 675806 1
D19 17mm 613401C 1 62 / 450mm 636851C 1
D19 18mm 613428C 1 137/250mm 640670 1 1282-C19-1BMZ-PL-6SD 679232 1
D19 19mm 613436C 1 145 / 250mm 641200 1
D19 20mm 613444C 1 2150-2160 PH-06 ELS 1482320 1
D19 21mm 613452C 1 VDE 2160-2170 PH-06 1616048 1
D19 22mm 613460C 1 2150-6.5 6679510C 1
D19 23mm 613479C 1 2150-8.0 6679780C 1
D19 24mm 613487C 1 2160 PH1 6683380C 1
IN19 5mm 615315C 1 2160 PH2 6683460C 1
IN19 6mm 615323C 1 2160 PH3 6683540C 1
214
CONCEPT OPTION 3
3 STAND MERCHANDISERS
Code No. Opening order Code No. Opening order Code No. Opening order Code No. Opening order
1B 6mm 600040C 1 D19 19mm 613436C 1 D19 HMZ 614610 1 534 15mm 651257C 1
1B 7mm 600059C 1 D19 20mm 613444C 1 D19 TMZ 614831 1 534 16mm 651265C 1
1B 8mm 600067C 1 D19 21mm 613452C 1 SR-D19Z-10 616834 1 534 17mm 651273C 1
1B 9mm 600075C 1 D19 22mm 613460C 1 D32 EMZ 628026 1 534 18mm 651516C 1
1B 10mm 600083C 1 D19 23mm 613479C 1 KD 26R-6 621846 1 534 19mm 651281C 1
1B 11mm 600091C 1 D19 24mm 613487C 1 28 PU 622761 1 1261 660876 1
1B 12mm 600105C 1 D19 25mm 613495C 1 33 / 6S 96660 1 MV 150mm 6500720 1
1B 13mm 600113C 1 D19 26mm 613509C 1 36 / 1 6327320 1 106 8725200 1
1B 14mm 600121C 1 D19 27mm 613517C 1 38 / 400 633267C 1 113 8753680 1
1B 15mm 600148C 1 D19 28mm 613525C 1 38 / 500 633283C 1 116A 8757670 1
1B 16mm 600156C 1 D19 29mm 613533C 1 62 / 150mm 636800 1 4550-20 760161 1
1B 17mm 600164C 1 D19 30mm 613541C 1 62 / 200mm 636819 1 S 8000 6701030 1
1B 18mm 600172C 1 D19 32mm 613576C 1 62 / 250mm 636827 1 8132 - 200 JC 6719670 1
1B 19mm 600180C 1 IN19 5mm 615315C 1 62 / 300mm 636835 1 8250 - 200 JC 6707310 1
1B 20mm 600199C 1 IN19 6mm 615323C 1 62 / 375mm 636843C 1 8316 - 200 JC 6745080 1
1B 21mm 600202C 1 IN19 7mm 615331C 1 62 / 450mm 636851C 1 S 8003 JC 6701110 1
1B 22mm 600210C 1 IN19 8mm 615358C 1 137 / 175 6406620 1 8380 - 250 TL 6752100 1
1B 23mm 600229C 1 IN19 9mm 615366C 1 137 / 250 640670 1 8531 / 250 675792 1
1B 24mm 600237C 1 IN19 10mm 615374C 1 145 / 250 6412000 1 8531 / 300 675806 1
1B 25mm 600245C 1 IN19 12mm 615382C 1 2150-2160 PH-06 ELS 1482320 1 1282-C19-1BMZ-PL6SD T/ASS 679232 1
1B 26mm 600253C 1 IN19 14mm 615390C 1 VDE 2160-2170 PH-06 1616048 1 1282-C19-1BMZ-10SD T/ASS 679135 1
1B 27mm 600261C 1 IN19 17mm 615404C 1 2150-6.5 6679510C 1 1282-FM-C19-1BMZ-2PL T/ASS 679415 1
1B 28mm 600288C 1 IN19 19mm 615412C 1 2150-8.0 6679780C 1
1B 29mm 600296C 1 D19L 10mm 015705C 1 2160 PH1 6683380C 1
1B 30mm 600318C 1 D19L 12mm 015706C 1 2160 PH2 6683460C 1
1B 32mm 600326C 1 D19L 13mm 015701C 1 2160 PH3 6683540C 1
1B / 04M 601152 1 D19L 17mm 015703C 1 2150 3-150 6680280C 1
1B / 17M 601268 1 D19L 19mm 015704C 1 2150 4-150 6680360C 1
1B / 26M 601276 1 42 88M 6349051 1 2150 6.5-200 6680870C 1
D30 FMZ 623202 1 42KL-9M 6351978 1 2153 5.5 1482432C 1
D19 8mm 613304C 1 43TX-09 6360959 1 2161 PH2 1531204C 1
D19 9mm 613312C 1 1985 614335C 1 225/250 645036 1
D19 10mm 613320C 1 1987 614343C 1 225/300 645044 1
D19 11mm 613339C 1 1990 / 75 614378C 1 225/350 645052 1
D19 12mm 613347C 1 1990 / 125 614386C 1 225/450 645060 1
D19 13mm 613355C 1 1990 / 250 614394C 1 225/600 645079 1
D19 14mm 613363C 1 1993U-10T 614262C 1 534 10mm 651206C 1
D19 15mm 613371C 1 1993 Z/94 614459C 1 534 11mm 651214C 1
D19 16mm 613398C 1 1995 614475C 1 534 12mm 651222C 1
D19 17mm 613401C 1 1997 / 375 614491C 1 534 13mm 651230C 1
D19 18mm 613428C 1 1997 / 450 614556C 1 534 14mm 651249C 1
215
TECHNOLOGY AND SAFETY
OUR TORQUE WRENCH SERVICE -

QUALIFIED AND CUSTOMISED
Warranty
In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose
and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge.
The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use.
A warranty return will be assessed by our technical staff and if the return falls outside of our warranty policy, the customer will be notified and quoted for the repair.
Calibration
A standard calibration and the issue of a test certificate will be provided as standard practice on any repair conducted.
A SANAS calibration and the issue of a SANAS calibration certificate will be done on request at an additional nominal charge.
Please note that the torque wrench is Regular calibration, adjustment and
an item of measuring equipment. certification. Why is this so important?
We recommend › This us allows us to guarantee the precision and reliability of our torque tools in
› Calibration once a year (DIN EN ISO 6789:2003) the long term. We attach a great deal of importance to this as your safety is of the
or after 5000 load cycles (DIN EN ISO 6789:2003) utmost importance.
› We offer you the safety you require for everyday controlled tightening.
Your advantage
› Torque wrench offers measurement accuracy. GEDORE - competent control at the highest level
› Free calibration service at GEDORE SA.
216
WE TAKE YOUR HEALTH AND SAFETY SERIOUSLY.
To ensure that you use our tools safely, please familiarise
youself with the following information.*
Why should heavy tools be stored in

Tool trolley
the bottom drawer?
› Always store the heaviest tools in the bottom (heavy duty) drawer. › Read the operating instructions.
› When the bottom drawer is opened, the centre of gravity is relocated to a › Open only one drawer at a time, when more than one drawer is open it increases the chance of the trolley
tipping over.
safe range.
› Storing heavy tools in the upper drawers relocates the centre of gravity › Always keep the heaviest tools in the lower (heavy) drawer. Storage in the top drawers increases the chance of
the trolley tipping over.
upwards.
› When the drawer is opened, the centre of gravity is relocated to a critical › Take note of the permissible load capacity of each drawer and the total carrying capacity of the trolley.
range. › Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to
the pointed ends.
› This makes the tool trolley very susceptible to lateral forces. If the trolley is
› Only move the trolley when all the drawers are closed and locked.
exposed to lateral forces such as impact, it can overturn.
› Always observe the load capacity for each drawer to ensure that › When the trolley is stationary always set the safety brake on the swivel castors to avoid movement.
you always stay in the safe range.
› S 1 = tool trolley centre of gravity when the drawer is closed

› S 2 = tool trolley centre of gravity when the drawer is opened Tool chests
› Red = critical range danger of overturning
› Do not climb or step on to the tool chest.
› Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to the
pointed ends.
› To avoid injury keep your back straight and lift from your knees when attempting to lift the tool chest.
S1 S2
Spanners
› Only use spanner sizes and profiles which fit the bolt or nut head.
› Do not use spanners as levers or as striking tools.
S1 S2
› Select the spanner in accordance with the screwed connection. This applies particularly to screwed connections
with high torques.
› Never extend the tool lever arm except when the tools are designed especially for this purpose, e.g. single ended
ring spanners.
› Never hit a spanner with a hammer except when the tools have an area designed especially for this purpose, e.g.
slogging spanners.
› Always apply the spanner at a right angle to the bolt axis.
› Always pull the spanner towards you. Never push the spanner away from you. If for any reason you can only press
the spanner away from you, use your open hand to prevent injuring your knuckles.
General › Ring spanners transmit the forces more consistently. Ring spanners are therefore more suitable for large torques.
› Always wear safety goggles for tasks involving chips or the possibility of parts › Apply open ended spanners in such a way that the angle of the jaw is facing in the direction
of rotation.
splintering.
› Only use the hand tools for their intended purpose. › If a torque is required for the screwed connection, use a torque wrench.
› Never modify or tamper with tools. Exceptions: Professional regrinding of › Never work with damaged spanners or attempt to repair them, rather replace them.
chisels, scrapers, cutting tools as well as hammer edges.
› Never work with damaged tools. Damaged tools must be replaced
immediately.
› Handles must be free of oil and grease. Screwdrivers
› Depending on the task, protect your hands by wearing work gloves.
› Work on live circuits may only be performed by qualified personnel using
suitable VDE tools. › Choose the screwdriver which is suitable for the respective bolt head profile.
› Choose a safe surface to ensure stability. Wear safety shoes. › Place the workpiece on a ledge or clamp it. This helps to avoid injuries incurred by sliding blades.
› Wear the specified ear protection when working in noisy environments. › Avoid cuts by directing the requisite pressure for releasing or tightening
the bolt head away from your body.
› Wear protective gloves when working with screwdrivers.
› If the screwdriver is too long, do not under any circumstances shorten
the blade or handle. Choose a shorter screwdriver.
› Do not use the screwdriver as a caulking or crushing tool.
* Furthermore, the relevant safety guidelines of various institutions apply, e.g. the › Light hammer impact may only be applied for loosening screws using suitable screwdrivers with striking cap
guidelines of the trade associations, employers' instructions and the statutory or continuous blade.
specifications of the respective country. › If the bolt fails to loosen, use the GEDORE impact driver set
No. K 1900-013 to release the bolt without destroying it.
› Insulated and tested screwdrivers must be used when working on electrical systems.
217
VDE tools Pullers

› Work on electrically live equipment may only be carried out by trained electricians. › Read the operating instructions.
› Only tools and safety equipment marked with the double triangle or bell 1000V symbol › Use only original spare parts and accessories for your GEDORE puller. Never use worn, modified
may be used. or defective spare parts or accessories.
› Before commencing any work, check the insulation for damage. › Wear goggles and protective clothing when working. For added safety, use the GEDORE safety
› Damaged tools must not be used. cover 5.10.
› The regulations of the employers’ liability insurance associations and power supply companies must › Before pulling, ensure that the legs are in contact with the part to be pulled and are firmly
be complied with. tightened so that the spindle operates centrally along the axis of the puller.
› GEDORE VDE tools are approved for work on live circuits at voltages up to 1000V AC and 1500V DC. › Attention! When using a puller, forces of up to several tons are generated. Take care to ensure
› Tools must not be combined unless they are designed to be securely joined together. that the puller is correctly positioned and is vertical to the component being pulled.
› Do not use electric or pneumatic power or percussion drivers.
= >
Ratchets, tools and sockets

› Ratchets are suitable for quick loosening and tightening.
› Avoid jerky movements with the ratchet, e.g. caused by hammer impact.
> >
› The square drive and the tool and socket square drive must be of the same size.
› Select the drive size in accordance with the screwed connection. This applies particularly to screwed
connections with high torques.
› Ensure that the ball engages properly in the ball catch.
› Always pull the spanner towards you. Never push the spanner away from you. If for any reason you
can only press the spanner away from you, use your open hand to prevent injuring your knuckles.
› Only use suitable sockets and connections for the impact driver. Use a safety pin and ring to secure
the connection between the socket, extension and machine.
› When using reducers, the smaller drive's torque always applies.
› Do not use ratchets as levers or as striking tools.
Pipe bending systems

Cutting tools
› Read the operating instructions.
› Never use defective or worn pipe bending systems. › Always set cutting tools down on a clearly visible place. Handles should always point towards
› Replace defective or worn parts with original parts. you.
› Use suitable systems and tools for bending. › Sharpen your cutting tools regularly. Blunt cutting tools represent a greater risk of injury than
› Wear safety goggles, safety shoes and protective clothing. sharp ones. Blunt cutting tools require more force to be applied.
› Ensure stability of the pipe bending system during the bending process. › Store cutting tools separately. This protects the blades and your fingers.
› Set shears down with their tips closed. This protects the blades and your fingers.
Safety notes for Torque tools

striking tools
› Read the operating instructions.
Chisels › Only use correctly calibrated torque wrenches.
› Wear safety glasses and safety gloves. › Treat torque wrenches as measuring equipment. Store torque wrenches carefully.
› Before starting work, check that the chisel blade is sharp and the striking end is burr-free. The blades › Only use torque wrenches within the permissible torque range.
must be properly wet-sharpened. › Stop tightening the bolt immediately once you feel and hear the click signal.
› Select the appropriate type and size of chisel for the work to be carried out. › Apply the torque wrench at a right angle to the screwed connection.
› Hold the chisel with a firm grip. › Only use original end fittings or accessories which fit the respective torque wrench.
› When working, keep your eyes on the chisel tip. › Where possible, do not use any reducers.
› Wherever possible, use a chisel with hand guard. › Never loosen bolts using a torque wrench.
› Never use chisels on workpieces harder than 40 HRC. › Never use the torque wrench as a hammer.
› Set safety guards in place to prevent splinters and chips posing a hazard for other people. › Slacken the torque wrench after completing work.
› Never use defective or worn accessory parts. Replace defective or worn parts
Centre punches, drifts and mortise chisels with original parts.
› These tools are subject to the same safety rules as chisels. › Only use one hand on the handle of the torque wrench;
two-handed operation is only possible using DREMOMETER A - F.
218
Torque multipliers Work gloves
› Read the operating instructions. › Read the operating instructions.

› Wear safety goggles, safety shoes and protective clothing. › Ensure that your work gloves are suitable for the respective task to be performed.
› Always inspect the torque multiplier for damage before use. › Examine your work gloves for damage before use. Damaged work gloves must be
› Never use electric, pneumatic or battery operated torque multipliers or impact wrenches. replaced.
› Never exceed the specified maximum input torque. › Only work using work gloves which fit your hands perfectly.
› Always use impact sockets in accordance with DIN 3129 or ISO 2725-2 and ISO 1174. › Store your work gloves in a clean and dry place.
› Always securely connect the reaction arm to the support bolt.
› Never extend the impact socket or connector between bolt and torque multiplier.
› Never use a universal or cardan joint.
› Never hit the torque multiplier with a hammer.
› Do not drop the torque multiplier. Safety goggles
› Never use the torque multiplier if it has been dropped, used to strike other objects,
or if anything has fallen on it. › Read the operating instructions.
› Always keep hands and fingers away from the reaction arm. › Ensure that your safety goggles are suitable for the respective task to be performed.
› Always select an anchor point (wall, another bolt) sufficient to withstand torque › Examine your safety goggles for damage before use. Damaged safety goggles must
reaction forces. Reaction torque equals output torque. be replaced.
› Never allow the gearbox to touch a wall or other object. › Store safety goggles in dry areas. Use the black plastic bag provided for this purpose.
› Never modify the reaction arm without consulting with the manufacturer. This will help you to avoid scratches on the lenses.
› Clean the lenses regularly under running water, not when dry.
› Do not wear safety goggles on top of standard spectacles. Mechanical effects can be
transferred which may be dangerous.
Hammers
› Always wear safety glasses and safety gloves.
› Use the hammer only for its intended purpose.
› Never misuse the hammer as a lever. Ear protection
› Before starting work, check that the hammer head is securely attached to the shaft. › Read the operating instructions.
› Select the appropriate size hammer for the work to be carried out. › Ensure that your ear protection is suitable for the respective task to be performed.
› Never hit two hammers together. › Examine your ear protection for damage before use. Ear protection displaying damage
› Never use steel hammers on workpieces harder than 46HRC. Use suitable plastic-faced must be replaced.
hammers for this. If in doubt, rather use a suitable plastic-faced hammer. › Wear ear protection for the entire duration of your stay in noisy areas.
› Avoid bouncing blows. › Store your ear protection in a clean and dry place.
› Use only the work faces of the hammer. Blows with the side face damage the non-hardened › Avoid impact against the earpieces. Otherwise, this can move the earpieces and lead
hammer eye. This can loosen the grip of the shaft in the hammer head. to a noise level which is harmful for your ears.
› If a burr forms on the pein or face of the hammer head, this must be immediately removed.
Failure to do this can pose the risk of splintering when the hammer is in use.
› Grip the hammer shaft as far away from the hammer head as possible. This improves the
impact effect and avoids vibrations.
› Do not store hammers with wooden shafts in warm, dry environments. Wood is a natural
product. Dry, warm storage conditions can cause the shaft to lose moisture and shrink, so that Pliers
the hammer shaft is no longer a tight fit in the hammer head.
› Do not store the wooden shaft in too damp conditions! Too much moisture causes
› Wear protective goggles when working with pliers. Ejected bits of wire and circlips not
the wooden shaft to swell up and damages the wooden fibres. This can result in the
positioned correctly in the tip of the pliers pose a risk to your eyes.
wooden shaft snapping behind the eye area.
› Check on the jaws for wear and tear. Worn jaws result in slipping and thus in
accidents.
› The joint of the pliers should not to have any noticeable play. Exceptions are the
sliding joints.
› When cutting wire, choose pliers that match the wire diameter and wire hardness.
Safety notes › Never use pliers as hammers.
› Only insulated and tested pliers are to be used when working on electrical equipment.
› For engines with ignition coils integrated in the spark plug connector (coil-on-plug), › Grip wrenches are only for briefly fixing work pieces.
use only spark plug sockets with retainer springs. (No. 50 - 59).
› Do not use magnetic spark plug spanners on coil-on-plug spark plugs.
› This can result in control unit faults.
219
b c2
d b
TECHNOLOGY AND SAFETY e c1
TIGHTENING / TEST TORQUE

Suggested bolt tightening torque in Nm (Newton metres) Wrench/spanner test torques in accordance with DIN ISO 1711-1 (minimum guaranteed values) Nm
These torque levels are guideline values for metric standard threads in accordance with DIN ISO
261 and head sizes in accordance with DIN EN ISO 4762, DIN EN ISO 4032, DIN EN ISO 4014, and
DIN 931-2, 6912, 7984 and 7990. These produce a 90% utilisation of the bolt yield strength. The No. 2, 2A,
No. 6, No. 35 A
calculations are based on a friction coefficient of 0.14 (new bolt) without any after treatment, 2B No. 26 R No. 894
No. 4 No. 1B, 7, No. 25 No. 35 B
(non-lubricated). Please note: in extreme cases, e.g. for bolts lubricated with MOS2 compound No. 1B, No. 626 No. 895
400 No. 3112
308, 7
and with cadmium plated connecting elements on both sides, the tightening torque should be
reduced by around 20 %.
Tightening values for quality grade as per DIN 267
4.6 5.6 6.9 8.8 10.9 12.9
M2 0,123 0,162 0,314 0,373 0,520 0,628 4 1,90

M 2,2 0,196 0,265 0,510 0,598 0,843 1,010 4,5* 2,64
<
M 2,5 0,284 0,373 0,726 0,863 1,206 1,451 5 11,5 3,55
M3 0,441 0,588 1,128 1,344 1,883 2,256 5,5 14,4 4,64 14,4 2,32
M 3,5 0,677 0,902 1,736 2,060 2,893 3,481 6* 17,6 7,4 5,92 17,6 2,96
M4 1,000 1,344 2,599 3,040 4,315 5,148 7 25,2 11,4 9,12 25,2 4,56
8 34,5 16,6 13,3 34,5 34,5 6,65
M5 1,916 2,648 5,099 6,031 8,483 10,200
9* 45,4 23 18,4 45,4 45,4 9,20
M6 3,432 4,511 8,728 10,300 14,710 17,652 10 58,1 31 24,8 58,1 58,1 58,1 12,4
11 72,7 40,4 32,3 72,7 72,7 72,7 16,1
M7 5,590 7,453 14,220 17,162 24,517 28,439
12* 89,1 51,5 41,2 89,1 89,1 89,1 20,6
13 107 64,5 51,6 107 107 107 25,8
M8 8,238 10,787 21,575 25,497 35,304 42,168
14* 128 79,4 63,5 128 128 128 31,7
15 150 96,2 77,0 150 150 150 38,5
M 10 16,67 21,575 42,168 50,014 70,608 85,317 16 175 115 92,3 175 175 175 46,1
17* 201 134 107 201 201 201 53,5
18 230 160 128 230 230 230 64,0
M 12 28,44 38,246 73,550 87,279 122,60 147,10 19* 261 186 149 261 261 261 74,5
20* 294 215 172 294 294 294 86,0
21 330 247 198 330 330 330 99,0
M 14 45,11 60,801 116,70 138,30 194,20 235,40 22* 368 281 225 368 368 368 112
23* 408 319 255 408 408 408 127
24 451 359 287 451 451 451 143
M 16 69,63 93,163 178,5 210,80 299,10 357,90 25* 496 402 322 496 496 496 161
26* 544 449 359 544 544 544 179
27 594 499 399 594 594 594 199
M 18 95,12 127,50 245,20 289,3 411,90 490,30
28* 647 552 442 647 647 647 221
M 20 135,3 180,45 384,10 411,90 578,60 696,30 30 760 670 536 760 760 760 268
32* 884 804 643 884 884 884 321
M 22 182,4 245,16 470,70 559,00 784,50 941,40
34 1019 951 761 1019 1019 1019 381
M 24 230,5 308,91 598,20 711,00 1000 1196 36 1165 1117 894 1165 1165 1165 447
M 27 343,2 460,90 887,50 1049 1481 1775 41 1579 1442 1154 1579 1579 1579 577
M 30 465,8 622,72 1206 1422 2010 2403 46 2067 1816 1453 2067 2067 2067 726
M 33 632,5 848,30 1628 1932 2716 3266 50 2512 2145 1716 2512 2512 2512 858
M 36 814,0 1089 2099 2481 3491 4197 55 3140 2077 3140 3140 3140 1038
M 39 1059 1412 2716 3226 4531 5443 60 3849 2471 3849 3849 1235
M 42 1304 1746 3364 3991 5609 6727 65 4021 2900 4021 4021 1422
M 45 1638 2177 4207 4992 7012 8414 70 4658 3364 4658 4658 1618
M 48 1981 2638 5080 6021 8473 10150 75 5394 3862 5394 1765
M 52 2540 3393 6541 7747 10885 13092 80 6178 4394 6178 1912
M 56 3168 4227 8149 9650 13582 16279 85 6963 6963 2059
M 60 3932 5247 10101 11964 16867 20202 90 7845 7845 -
M 64 4737 6306 12160 14416 20300 24320 95 8336 8336 -
* These sizes are not included in DIN ISO 272

Note: In reference to the spanner test torque as per DIN ISO 1711-1 column, we explicitly point out that these are minimum guarantee values.
Bolts from M39 in quality grades 4.6, 5.6, 6.9, 8.8, 10.9 and 12.9 are not standardised.
220
e c1 c
e c f f
f
TIGHTENING / TEST TORQUE

Wrench/spanner test torques in accordance with DIN ISO 1711-1 Test torques for tightening tools for hexagon socket head screws
(minimum guaranteed values) Nm
With internal square as per DIN 3120 DIN EN ISO No. 42T, No. IN 34 With hexagon head as per DIN 7422
4762 DT42
6,3 10 12,5 20 25 6,3 10 12,5 20 25
No. 42,
No. 20 No. 30 No. 19 No. 32 No. 42EL No. IN 20 No. IN30 No. IN 19 No. IN 32 No. IN 21
No. No. No. No. D 21
D 20 D 30 D 19 D 32
<
<
<
1/4“ 3/8“ 1/2“ 3/4“ 1“ 1/4“ 3/8“ 1/2“ 3/4“ 1“
M2 4 10,4 1,5 0,82

M 2,2 4,5* 12,6 2 1,9 1,9
M 2,5 5 15,1
M3 5,5 17,8 2,5 3,8 3,8
M 3,5 6* 20,6 23,2
M4 7 26,8 33,2 3 6,6 6,6 6,6
8 33,6 45,5 94,1 4 16 16 16 16 16
M5
9* 41,1 59,9 119,2
M6 10 49,1 76,7 147 5 30 30 30 30 30
11 57,8 96 178
M7
12* 67,0 118 212
13 68,6 141 249 6 52 52 52 52 52
M8
14* 68,6 169 288 7 80 78 78
15 198 331 8 120 120 120 120 120
M 10 16 225 377
17* 225 425 9 165 165
18 225 477 10 220 220 220 220
M 12 19* 225 531
20* 225 569 12 370 370 370
21 225 569
M 14 22* 225 569 569
23* 569 569
24 569 569 14 590 590 590 590
M 16 25* 569 583
26* 569 624
27 569 665
M 18
28* 569 707
M 20 30 569 795 17 980 980 1000 1000 1000
32* 569 888
M 22
34 569 984
M 24 36 1084 1677 19 1360 1360 1400 1400 1400
M 27 41 1353 1910
M 30 46 1569 2143 22 2110 2100 2100
M 33 50 1569 2329 24 2750 2700
M 36 55 1569 2562 27 3910
M 39 60 1569 2795 30 4000
M 42 65 2795 32 4000
M 45 70 2795
M 48 75 2795 36 4000
M 52 80 2795
M 56 85
M 60 90
M 64 95
The matching test torques are derived from the theoretical load capability of the connecting square drive.
Note: Hand tightening sockets are unsuited to use with impact drivers. Inappropriate use poses an accident risk.
221
HEAD WIDTHS AND THREAD DIAMETERS

Nominal size Thread diameter Ø Nominal size Nominal size Thread diameter Ø Nominal size
DIN ISO 272 Metric for high-
normal (large) Metric as per DIN tensile bolted
structural joints as Inch mm BS 916, 1083 Inch mm
ISO 272
per EN 14399-4
3,2 (–) 1,6
4 (–) 2
5 (–) 2,5 5/32 0,1562 3,97 8 BA 0,152 3,86
5,5 (–) 3 7 BA 0,172 4,37
3/16 0,1875 4,76 6 BA 0,193 4,90
7 (–) 4 7/32 0,2187 5,56 5 BA 0,220 5,59
8 (–) 5 1/4 0,2500 6,35 4 BA 0,248 6,30
1/16 W 0,256 6,90
10 (–) 6 9/32 0,2812 7,14 3 BA 0,282 7,16
11 (–) 7 3/32 W 0,297 7,54
5/16 0,3125 7,94 2 BA 0,324 8,23
13 (–) 8 11/32 0,3438 8,73 1/8 W (3/16) 0,340 8,64
16 (–) 10 3/8 0,3750 9,52 1 BA 0,365 9,27
13/32 0,4062 10,32 0 BA (7/32) 0,413 10,49
18 (21) 12 7/16 0,4375 11,11 3/16 W 1/4 0,445 11,30
21 (24) 14
22 12 1/2 0,5000 12,70 1/4 W 5/16 0,525 13,34
24 (27) 16 9/16 0,5625 14,29
27 (30) 18 16 19/32 0,5938 15,08 5/16 W 3/8 0,600 15,24
5/8 0,6250 15,88
30 (34) 20 11/16 0,6875 17,46
32 20 3/8 W 7/16 0,710 18,03
34 (36) 22 3/4 0,7500 19,05
36 (41) 24 22 25/32 0,7812 19,84
41 (46) 27 24 13/16 0,8125 20,64 7/16 W 1/2 0,820 20,83
7/8 0,8750 22,22
46 (50) 30 27 1/2 W 9/16 0,920 23,37
50 (55) 33 30 15/16 0,9375 23,81
1. 1,0000 25,40
55 (60) 36 9/16 W 5/8 1,010 25,65
60 (65) 39 36 1.1/16 1,0625 26,99
5/8 W (11/16) 1,100 27,94
65 42 1.1/8 1,1250 28,58
70 45 1.3/16 1,1875 30,16 11/16 W 3/4 1,200 30,48
1.1/4 1,2500 31,75
75 48 1.5/16 1,3125 33,34 3/4 W 7/8 1,300 33,02
80 52 1.3/8 1,3750 34,92 13/16 W (15/16) 1,390 35,31
1.7/16 1,4375 36,51
85 56 1.1/2 1,5000 38,10 7/8 W 1. 1,480 37,59
90 60 1.5/8 1,6250 41,28
1.11/16 1,6875 42,86 1. W 1.1/8 1,670 42,42
95 64 1.3/4 1,7500 44,45
100 68 1.13/16 1,8125 46,04
1.7/8 1,8750 47,62 1.1/8 W 1.1/4 1,860 47,24
105 72 2. 2,0000 50,80
110 76 2.1/16 2,0625 52,39 1.1/4 W 1.3/8 2,050 52,07
2.3/16 2,1875 55,56
115 80 2.1/4 2,2500 57,15 1.3/8 W 1.1/2 2,220 56,39
120 85 2.3/8 2,3750 60,32
2.7/16 2,4375 61,91 1.1/2 W 1.5/8 2,410 61,21
130 90 2.9/16 2,5625 65,09 1.5/8 W 1.3/4 2,580 65,53
2.5/8 2,3750 66,68
2.3/4 2,7500 69,85 1.3/4 W 2. 2,760 70,10
135 95 2.13/16 2,8125 71,44
2.15/16 2,9375 74,61
3 3,0000 76,20 (1.7/8W) 76,70
145 100 3.1/8 3,1250 79,38 2.1/4 3,150 80,01
3.3/8 3,3750 85,72
3.1/2 3,5000 88,90 2.1/2 3,550 90,17
150 105 3.3/4 3,7500 95,25
3.7/8 3,8750 98,42 2.3/4 3,890 98,81
155 110 4.1/8 4,1250 104,78 3. 4,180 106,17

4.1/4 4,2500 107,95
4.1/2 4,5000 114,30 3.1/4 4,530 115,06
165 115 4.5/8 4,6250 117,48
4.7/8 4,8750 123,82 3.1/2 4,850 123,19
5. 5,0000 127,00
170 120 5.1/4 5,2500 133,35 3.3/4 5,180 131,57
5.3/8 5,3750 136,52
5.5/8 5,6250 142,88 4. 5,550 140,97
180 125 5.3/4 5,7500 146,05
6. 6,0000 152,40
6.1/8 6,1250 155,58 4.1/2 6,380 162,05
185 130
200 140
210 150
222
SPANNER SIZES TOLERANCE FOR
BOLTS AND SOCKET WRENCHES
Nominal size/s Tolerance class 1 as per Tolerance class 2a as
in mm ISO 691 dimensions per ISO 691 dimensions Conversion tables
Inch to decimal-inches and mm
!
min. max. min. max. in. dec.in. mm. in. dec.in. mm.
2 ≤s < 3 + 0,02 + 0,08 + 0,02 + 0,12 0 0 0 1/2 0.5 12,7000
3 ≤s < 4 + 0,02 + 0,10 + 0,02 + 0,14 1/64 0.015625 0,3969 33/64 0.515625 13,0969
4 ≤s < 6 + 0,02 + 0,12 + 0,02 + 0,16 1/32 0.03125 0,7938 17/32 0.53125 13,4938
3/64 0.046875 1,1906 35/64 0.546875 13,8906
3 ≤s < 10 + 0,03 + 0,15 + 0,03 + 0,19
10 ≤s < 12 + 0,04 + 0,19 + 0,04 + 0,24 1/16 0.0625 1,5875 9/16 0.5625 14,2875
12 ≤s < 14 + 0,04 + 0,24 + 0,04 + 0,30 5/64 0.078125 1,9844 37/64 0.578125 14,6844
3/32 0.09375 2,3812 19/32 0.59375 15,0812
14 ≤s < 17 + 0,05 + 0,27 + 0,05 + 0,35 7/64 0.109375 2,7781 39/64 0.609375 15,4781
17 ≤s < 19 + 0,05 + 0,30 + 0,05 + 0,40
19 ≤s < 26 + 0,06 + 0,36 + 0,06 + 0,46 1/8 0.125 3,1750 5/8 0.625 15,8750
9/64 0.140625 3,5719 41/64 0.640625 16,2719
26 ≤s < 33 + 0,08 + 0,48 + 0,08 + 0,58 5/32 0.15625 3,9688 21/32 0.65625 16,6688
33 ≤s < 55 + 0,10 + 0,60 + 0,10 + 0,70 11/64 0.171875 4,3656 43/64 0.671875 17,0656
55 ≤s < 75 + 0,12 + 0,72 + 0,12 + 0,92
3/16 0.1875 4,7625 11/16 0.6875 17,4625
75 ≤s < 105 + 0,15 + 0,85 + 0,15 + 1,15 13/64 0.203125 5,1594 45/64 0.703125 17,8594
105 ≤s < 150 + 0,20 + 1,00 + 0,20 + 1,40 7/32 0.21875 5,5562 23/32 0.71875 18,2562
150 ≤s < 210 + 0,25 + 1,22 - - 15/64 0.234375 5,9531 47/64 0.734375 18,6531
1/4 0.25 6,3500 3/4 0,75 19,0500

This tolerance class applies only to ring spanners or socket wrenches that have not been 17/64 0.265625 6,7469 49/64 0,765625 19,4469
manufactured by material removal. 9/32 0.28125 7,1438 25/32 0,78125 19,8438
19/62 0.296875 7,5406 51/62 0,796875 20,2406
Spanner sizes in accordance with this international standard must be marked with: 5/16 0.3125 7,9375 13/16 0,8125 20,6375
a) Spanner head size. 21/64 0.328125 8,3344 53/64 0,828125 21,0344
b) Reference to the international standard, i.e. ISO 691. 11/32 0.34375 8,7312 27/32 0,84375 21,4312
c) Nominal sizes in millimetres. 23/64 0.359375 9,1281 55/64 0,859375 21,8281
d) Tolerance class 1 or 2.
3/8 0.375 9,5250 7/8 0,875 22,2250
25/64 0.390625 9,9219 57/64 0,890625 22,6219
13/32 0.40625 10,3188 29/32 0,90625 23,0188
27/64 0.421875 10,7156 59/64 0,921875 23,4156
7/16 0.4375 11,1125 15/16 0,9375 23,8125

29/64 0.453125 11,5094 61/64 0,953125 24,2094
15/32 0.46875 11,9062 31/32 0,96875 24,6062
31/64 0.484375 12,3031 63/64 0,984375 25,0031
1 1 25,4000
223
TORQUE
CONVERSION TABLES
Required Units Torque conversion factors Corresponding unit
= mNm = cNm = Nm = ozf·in = lbf·in = lbf·ft = gf·cm = f·cm (kp·cm)

= kgf·m
(kp·m)
Application
1 mN·m 1 0,1 0,001 0,142 0,009 0,0007 10,2 0,01 0,0001
Conversion formula:
1 cN·m 10 1 0,01 1,416 0,088 0,007 102 0,102 0,001 Units to be converted x factor
= corresponding unit
1 N·m 1000 100 1 141,6 8,851 0,738 10197 10,2 0,102
1 ozf·in 7,062 0,706 0,007 1 0,0625 0,005 72 0,072 0,0007 Example:

Conversion of 5lbf·ft in cNm
1 lbf·in 113 11,3 0,113 16 1 0,083 1152,1 1,152 0,0115
1 lbf·ft 1356 135,6 1,356 192 12 1 13826 13,83 0,138 Solution:

5 x 135.6 = 678cNm
1 gf·cm 0,098 0,01 0,0001 0,014 0,0009 0,00007 1 0,001 0,00001
1 kgf·cm
98,07 9,807 0,098 13,89 0,868 0,072 1000 1 0,01
(kp·cm)
1 kgf·m
9807 980,7 9,807 1389 86,8 7,233 100000 100 1
(kp·m)
Conversion from m in kgf·m (kp·m) 1N·m = 0,102 kgf·m Conversion from kgf·m (kp·m) in Nm 1 kgf·m (kp·m) = 9,807 N·m
N·m 0 1 2 3 4 5 6 7 8 9 kgf·m(kp·m)0 1 2 3 4 5 6 7 8 9
0 0,00 0,10 0,20 0,31 0,41 0,51 0,61 0,71 0,82 0,92 0 0,00 9,81 19,61 29,42 39,23 49,03 58,84 68,65 78,45 88,26
10 1,02 1,12 1,22 1,33 1,43 1,53 1,63 1,73 1,84 1,94 10 98,07 107,87 117,68 127,49 137,29 147,10 156,91 166,71 176,52 186,33
20 2,04 2,14 2,24 2,35 2,45 2,55 2,65 2,75 2,86 2,96 20 196,13 205,94 215,75 225,55 235,36 245,17 254,97 264,78 274,59 284,39
30 3,06 3,16 3,26 3,37 3,47 3,57 3,67 3,77 3,87 3,98 30 294,20 304,01 313,81 323,62 333,43 343,23 w353,04 362,85 372,65 382,46
40 4,08 4,18 4,28 4,38 4,49 4,59 4,69 4,79 4,89 5,00 40 392,27 402,07 411,88 421,69 431,49 441,30 451,11 460,91 470,72 480,53
50 5,10 5,20 5,30 5,40 5,51 5,61 5,71 5,81 5,91 6,02 50 490,33 500,14 509,95 519,75 529,56 539,37 549,17 558,98 568,79 578,59
60 6,12 6,22 6,32 6,42 6,53 6,63 6,73 6,83 6,93 7,04 60 588,40 598,21 608,01 617,82 627,63 637,43 647,24 657,05 666,85 676,66
70 7,14 7,24 7,34 7,44 7,55 7,65 7,75 7,85 7,95 8,06 70 686,47 696,27 706,08 715,89 725,69 735,50 745,31 755,11 764,92 774,73
80 8,16 8,26 8,36 8,46 8,57 8,67 8,77 8,87 8,97 9,08 80 784,53 794,34 804,15 813,95 823,76 833,57 843,37 853,18 862,99 872,79
90 9,18 9,28 9,38 9,48 9,59 9,69 9,79 9,89 9,99 10,10 90 882,60 892,41 902,21 912,02 921,83 931,63 941,44 951,25 961,05 970,86
100 10,20 10,30 10,40 10,50 10,60 10,71 10,81 10,91 11,01 11,11 100 980,67 990,47 1000,28 1010,08 1019,89 1029,70 1039,50 1049,31 1059,12 1068,92
Conversion from N·m in Ibf·ft 1N·m=0,7376 lbf·ft Conversion from Ibf·ft in N·m 1 lbf·ft = 1,356 N·m
N·m 0 1 2 3 4 5 6 7 8 9 Ibf·ft 0 1 2 3 4 5 6 7 8 9
0 0,00 0,74 1,48 2,21 2,95 3,69 4,43 5,16 5,90 6,64 0 0,00 1,36 2,71 4,07 5,42 6,78 8,13 9,49 10,85 12,20
10 7,38 8,11 8,85 9,59 10,33 11,06 11,80 12,54 13,28 14,01 10 13,56 14,91 16,27 17,63 18,98 20,34 21,69 23,05 24,40 25,76
20 14,75 15,49 16,23 16,96 17,70 18,44 19,18 19,91 20,65 21,39 20 27,12 28,47 29,83 31,18 32,54 33,90 35,25 36,61 37,96 39,32
30 22,13 22,86 23,60 24,34 25,08 25,81 26,55 27,29 28,03 28,76 30 40,67 42,03 43,39 44,74 46,10 47,45 48,81 50,16 51,52 52,88
40 29,50 30,24 30,98 31,72 32,45 33,19 33,93 34,67 35,40 36,14 40 54,23 55,59 56,94 58,30 59,66 61,01 62,37 63,72 65,08 66,43
50 36,88 37,62 38,35 39,09 39,83 40,57 41,30 42,04 42,87 43,52 50 67,79 69,15 70,50 71,86 73,21 74,57 75,93 77,28 78,64 79,99
60 44,25 44,99 45,73 46,47 47,20 47,94 48,68 49,42 50,15 50,89 60 81,35 82,70 84,06 85,42 86,77 88,13 89,48 90,84 92,20 93,55
70 51,63 52,37 53,10 53,84 54,58 55,32 56,05 56,79 57,53 58,27 70 94,91 96,26 97,62 98,97 100,33 101,69 103,04 104,40 105,75 107,11
80 59,00 59,74 60,48 61,22 61,96 62,69 63,43 64,17 64,91 65,64 80 108,46 109,82 111.18 112,53 113,89 115,24 116,60 117,96 119,31 120,67
90 66,38 67,12 67,86 68,59 69,33 70,07 70,81 71,54 72,28 73,02 90 122,02 123,38 124,73 126,09 127,45 128,80 130,16 131,51 132,87 134,23
100 73,76 74,49 75,23 75,97 76,71 77,44 78,18 78,92 79,66 80,39 100 135,58 136,94 138,29 139,65 141,00 142,36 143,72 145,07 146,43 147,78
Conversion from Nm in Ibf·in 1 N·m = 8,851 lbf·in Conversion from Ibf·in in Nm 1 lbf·in = 0,113 N·m
N·m 0 1 2 3 4 5 6 7 8 9 Ibf·in 0 1 2 3 4 5 6 7 8 9
0 0,00 8,85 17,70 26,55 35,40 44,25 53,10 61,96 70,81 79,66 0 0,00 0,11 0,23 0,34 0,45 0,56 0,68 0,79 0,90 1,02
10 88,51 97,36 106,21 115,06 123,91 132,76 141,61 150,46 159,31 168,16 10 1,13 1,24 1,36 1,47 1,58 1,69 1,81 1,92 2,03 2,15
20 177,02 185,87 194,72 203,57 212,42 221,27 230,12 238,97 247,82 256,67 20 2,26 2,37 2,49 2,60 2,71 2,82 2,94 3,05 3,16 3,28
30 265,52 274,37 283,22 292,08 300,93 309,78 318,63 327,48 336,33 345,18 30 3,39 3,50 3,62 3,73 3,84 3,95 4,07 4,18 4,29 4,41
40 354,03 362,88 371,73 380,58 389,43 398,28 407,14 415,99 424,84 433,69 40 4,52 4,63 4,75 4,86 4,97 5,08 5,20 5,31 5,42 5,54
50 442,54 451,39 460,24 469,09 477,94 486,79 495,64 504,49 513,34 522,20 50 5,65 5,76 5,87 5,99 6,10 6,21 6,33 6,44 6,55 6,67
60 531,05 539,90 548,75 557,60 566.45 575,30 584,15 593,00 601,85 610,70 60 6,78 6,89 7,00 7,12 7,23 7,34 7,46 7,57 7,68 7,80
70 619,55 628,40 637,26 646,11 654,96 663,81 672,66 681,51 690,36 699,21 70 7,91 8,02 8,13 8,25 8,36 8,47 8,59 8,70 8,81 8,93
80 708,06 716,91 725,76 734,61 743,46 752,32 761,17 770,02 778,87 787,72 80 9,04 9,15 9,26 9,38 9,49 9,60 9,72 9,83 9,94 10,06
90 796,57 805,42 814,27 823,12 831,97 840,82 849,67 858,52 867,38 876,23 90 10,17 10,28 10,39 10,51 10,62 10,73 10,58 10,96 11,07 11,19
100 885,08 893,93 902,78 911,63 920,48 929,33 938,18 947,03 955,88 964,73 100 11,30 11,41 11,52 11,64 11,75 11,86 11,98 12,09 12,20 12,31
224
Important prefix characters Comparison table of Vickers-Brinell-Rockwell
Giga
Mega
G
M
1.000.000.000
1.000.000
= 10 9
= 10 6
hardness and tensile strength
Kilo k 1.000 = 103
Hecto H 100 = 102 Vickers hardness Brinell hardness Rockwell hardness Rockwell hardness Tensile strength
HV 30 HB 30 HRB HRC sB
Deca Da 10 = 101 N/mm2
Deci d 0,1 = 10 -1 80 80,7 36,4 – 270
Centi c 0,01 = 10 -2 85 85 42,4 – 290
Milli m 0,001 = 10 -3 90 90 47,4 – 310
95 95 52,0 – 320
Micro µ 0,000001 = 10 -6 100 100 56,4 – 340
Nano n 0,000000001 = 10 -9 105 105 60,0 – 360
110 110 63,4 – 380
115 115 66,4 – 390
Important SI units with conversions to old but still commonly used units 120 120 69,4 – 410
125 125 72,0 – 420
Length metre m 130 130 74,4 – 440
Masa kilogramme 135 135 76,4 – 460
Time second s 140 140 78,4 – 470
Force newton N = m/s 2 1 N = 0,102 kp 145 145 80,4 – 490
150 150 82,2 – 500
Torque newton metre Nm 9,81 N·m = 1 kp·m 155 155 83,8 – 520
Energy (work) joule J = Nm 160 160 85,4 – 540
Heat quantity joule J 1 J = 0,239 cal 165 165 86,8 – 550
Power watt W = Nm/s 1 kW = 1,36 PS = 860 kcal/h 170 170 88,2 – 570
Pressure pascal Pa = N/m 2 100 000 Pa = 1 bar = 10 mWS 175 175 89,6 – 590
180 180 90,8 – 600
Electrical current ampere A 185 185 91,8 – 620
Temperature kelvin K 1 K = 1 °C 190 190 91,5 – 640
195 195 94,0 – 660
200 200 95,0 – 670
Conversion table, mass and weight 205 205 95,8 – 680
210 210 96,6 – 710
1 megagramme (Mg) = 1.000 kg = 10.000 hg = 100.000 dag = 1.000.000 g 215 215 97,4 – 720
1 ton (to.) = 1.000 kg 220 220 98,2 – 730
1 kilogramme (kg) = 10 hg = 100 dag = 1000 g 225 225 99,0 – 750
230 230 – 19,2 760
1 hectogramme (hg) = 10 dag = 100 g 235 235 – 20,2 780
1 decagramme (dag) = 10 g 240 240 – 21,2 800
1 gramme (g) = 10 dg = 100 cg = 1000 mg 245 245 – 22,1 820
1 decigramme (dg) = 10 cg = 100 mg 250 250 – 23,0 830
255 255 – 23,8 850
1 centigramme (cg) = 10 mg
260 260 – 24,6 870
1 miligramme (mg) = 1 mg 265 265 – 25,4 880
270 270 – 26,9 900
275 275 – 27,1 920
Conversion table, force and torque 280 280 – 27,6 940
1 newton = 0,102 kp 285 285 – 28,3 950
290 290 – 29,0 970
1 kilopond = 9,81 N 295 295 – 29,6 990
1 kilopond metre = 9,81 Nm 300 300 – 30,3 1010
310 310 – 31,5 1040
320 320 – 32,7 1080
330 330 – 33,8 1110
340 340 – 34,9 1140
Material properties 350 350 – 36,0 1170
Density Expansion Melting point Modulus of elasticity 360 359 – 37,0 1200
g/cm 3 1/°C °C N/mm 370 368 – 38,0 1230
Aluminium 2,7 0,000024 660,1 72 000 380 376 – 38,9 1260
390 385 – 39,8 1290
Lead 11,3 0,000029 327,3 16 000 400 392 – 40,7 1320
Iron (Steel) 7,86 0,000012 1540 210 000 410 400 – 41,5 1350
Gold 19,3 0,000014 1063 79 000 420 408 – 42,4 1380
Copper 8,9 0,000017 1083 126 000 430 415 – 43,2 1410
440 423 – 44,0 1430
Zinc 7,1 0,000026 419 94 000 450 430 – 44,8 1460
Glass 2,2–2,9 0,000008 800–1500 68 000 460 – – 45,6 (1490)
Air 0,0013 0,0036 470 – – 46,3 (1520)
Wood 0,5–0,7 10 000 480 – – 47,0 (1550)
490 – – 47,7 (1580)
Plastics / synthetic materials: 500 – – 48,3 (1600)
510 – – 49,1 (1630)
PS, 1,05 0,00008 3 400 520 – – 49,7 (1660)
PP, 0,9 0,00018 1 200 530 – – 50,4 (1690)
ABS 1,05 0,00010 2 500 540 – – 51,0 (1710)
550 – – 51,6 (1740)
560 – – 52,2 (1770)
570 – – 52,8 (1790)
Examples 580 – – 53,3 (1820)
590 – – 53,9 (1850)
Example 1: 600 – – 54,4 (1870)
610 – – 55,0 (1900)
Expansion of a steel body of 100mm in length at a temperature of 10°C. Lengthy expansion 620 – – 55,5 (1930)
coefficient x °C exp. = 100mm x 0,000012 x 10 = 0,012mm = 12µm 630 – – 56,0 (1950)
640 – – 56,5 (1980)
650 – – 57,0 (2000)
Example 2: 660 – – 57,5 (2030)
670 – – 58,0 (2050)
Elastic expansion e = s/E. A body of 100mm in length made of ABS is stretched with 680 – – 58,5 (2080)
s = 50N/mm2. e = 50N/mm2: 2500N/mm2 = 0.02. The expansion is: 10 mm x 0.02 = 2mm. 690 – – 59,0 (2110)
700 – – 59,5 (2130)
720 – – 60,4 (2170)
Example 3: 740 – – 61,2 (2220)
Two steel plates with a total thickness of 20mm are pre-stressed by means of a screw 760 – – 62,0 (2260)
780 – – 62,8 (2300)
connection of s = 50N/mm2: e = 50: 210000 = 0.00024. The compression in the surrounding 800 – – 63,6 –
area of the screw is 2 mm x 0.00024 = 0,0048mm = 5µm. 820 – – 64,3 –
840 – – 65,0 –
860 – – 65,7 –
The elastic compression induces a continuous pre-tension of the screw connection. 880 – – 66,3 –
900 – – 66,9 –
A properly tensed screw connection is selfinhibiting. 920 – – 67,5 –
940 – – 68,0 –
225
TECHNOLOGY
ARTICLE AND SAFETY
INDEX
ARTICLE INDEX ARTICLE INDEX

Article No. Page Article No. Page
1.07/K ........................... Puller Set ....................................................................................185 1404.............................. Tool Cabinet ...............................................................................116

1.15 ............................... Triple Grip Puller.......................................................................182 1410.............................. Artisan’s Tool Chest..................................................................119
1.26 .............................. Nut Splitter - Hydraulic ..........................................................183 142 ................................ Universal Pliers............................................................................87
1.30 ............................... Internal Extractor .....................................................................183 1425/3/5 ..................... Foam Inserts Spares ................................................................123
1.31 ............................... Internal Extractor Set ..............................................................185 1425/27/HM .............. Modular Assortment...............................................................123
1.36 ............................... Support Brace ...........................................................................184 1425/27/PL................. Modular Assortment...............................................................123
1.38 ............................... Separator Puller ........................................................................184 1425/27/SD ............... Modular Assortment...............................................................123
1.40 ............................... Bearing Separator ....................................................................184 1425/27/SP ................ Modular Assortment...............................................................123
1.67 ............................... Steering Wheel Puller .............................................................184 1425/3.......................... Tool Chest ...................................................................................118
1.73 ............................... Ball Joint Puller .........................................................................184 1425/3.......................... Workshop Tool Assortment ..................................................118
1.75 ............................... Oil Filter Hook..............................................................................93 1425/41/D19 ............. Modular Tool Assortment .....................................................122
1.85 ............................... Bearing Installation Set..........................................................185 1425/41/IB ................. Modular Tool Assortment .....................................................122
100 ................................ Centre Punch .............................................................................130 1425/5.......................... Comprehensive Tool Assortment.......................................119
106 ................................ Chisel & Punch Set ...................................................................131 1425/5.......................... Tool Chest ...................................................................................119
108 ................................ UNI Hand Guard .......................................................................130 143 ................................ Universal Pliers............................................................................87
1001.............................. Electricians VDE Toolset .........................................................140 145 ................................ Waterpump Pliers ......................................................................87
1100-1.04 ................... Universal Puller Set .................................................................185 1450S ........................... Tool Panel & Accessories .......................................................117
1101-001 ..................... Circlip Pliers Set ..........................................................................84 1460.............................. Tool Trunk ..................................................................................106
1101-1.29/3K ............. Ball Bearing Extractor Set......................................................185 1500.............................. Metal Work Bench....................................................................116
1102-003 ..................... Pliers Set ........................................................................................84 1500.............................. Wooden Work Bench ..............................................................116
113 ................................ Drift Punch Set ..........................................................................131 1502 ............................. Drawer Unit ................................................................................117
116 ................................ Pin Punch Set.............................................................................131 1510 ............................. Classic Tool Assortment .........................................................120
121 G ............................ Suction-Cup Lifter ....................................................................94 1510 ............................. Tool Trolley .................................................................................120
121 G-3 ........................ Suction-Cup Lifter ....................................................................94 1525 ............................. Comprehensive ........................................................................121
125 ................................ Piston Ring Clamp Band ..........................................................95 1525 ............................. Tool Trolley .................................................................................121
126 ................................ Piston Ring Pliers........................................................................95 1581 ............................. Tool Trolley .................................................................................122
126-060 ....................... Piston Ring Pliers........................................................................95 1581.............................. Classic Tool Assortment ........................................................122
1260 ............................. Toolbox - 3 Compartments ..................................................104 165-171-06 ................. Electronic Screwdriver Set ......................................................66
1261 ............................. Toolbox - 5 Compartments ..................................................104 165-TX-06 ................... Electronic Screwdriver Set ......................................................66
128 ............................... Valve Spring Tensioner.............................................................95 180 ................................ Cable Shears - Insulated ........................................................140
1281.............................. Toolbox - 5 Compartments - Aluminium.........................105 19................................... Boxes & Inserts ............................................................................46
1281/1282 ................. Tool Assortments ............................................................107-116 32................................... Repair Kits .....................................................................................46
1282/5.......................... Toolbox - 5 Compartments ..................................................104 1930.............................. Reducer 1/2” to 3/8” ..................................................................40
132 ................................ Hose Clamp Pliers .....................................................................96 1932.............................. Converter 1/2” to 3/4”...............................................................40
132 CLIC ...................... Hose Clamp Pliers ......................................................................96 1985.............................. Speed Brace Handle 1/2”.........................................................40
133 ................................ Open Ended Slogging Spanner ...........................................16 1987.............................. Sliding T-Bar 1/2” ........................................................................41
1335 ............................. Toolbox - 5 Compartments ..................................................105 1990 ............................. Extension Bar 1/2”......................................................................41
134 ............................... Straight Jaw Grip Wrench .......................................................85 1990M ......................... Extension with Magnet 1/2”...................................................41
135 ................................ Brake Spring Pliers .....................................................................96 1993 U-3...................... Reversible Ratchet 1/2”............................................................35
137 ................................ Grip Wrenches .............................................................................85 1993 U-10K ................ Reversible Plastic Ratchet 1/2” .............................................35
138 ................................ Welding Grip Pliers ....................................................................85 1993 U-10T................. Reversible Ratchet 1/2”............................................................35
138 Y............................. C-Grip Pliers .................................................................................85 1993 Z-94 ................... Reversible Ratchet & Coupler 1/2”.......................................35
139 ................................ Pry Bars ..........................................................................................93 1994 ............................. Square Coupler 1/2”..................................................................41
1401.............................. PRO Cabinet & Tools................................................................114 1995 ............................. Universal Joint 1/2”....................................................................41
1401.............................. Tool Cabinet ...............................................................................114 1996 ............................. Power Bar 1/2”.............................................................................40
1401L ........................... Large Tool Cabinet...................................................................115 1997.............................. Power Bar 1/2”.............................................................................40
1401L ........................... PRO Cabinet & Tools................................................................115 19L ................................ Extra Deep Socket (MM) (AF) .................................................37
1404.............................. PRO Cabinet & Tools................................................................116 1B .................................. Spanner Sets ...................................................................................7
226
ARTICLE INDEX

1B .................................. Spanners (AF) .................................................................................7 26 R ............................... Double Ended Box Spanners .................................................92
1B .................................. Spanners (MM) ...............................................................................6 26 RS............................. Stepped Tommy Bar..................................................................92
2 ..................................... Ring Spanner Sets......................................................................11 248ST ........................... Recoil-free Hammer ................................................................130
2 ..................................... Ring Spanners (MM) (AF).........................................................10 27................................... Wheel Socket Wrench - Trucks ..............................................92
20................................... Socket (MM) 1/4”........................................................................22 28 PU ............................ 4-Way Wheel Wrench................................................................92
20L ................................ Socket Long Pattern 1/4”.........................................................22 29 I ................................ Construction Ratchet ..............................................................12
2.20 .............................. Truck Workshop Kit .................................................................186 299 ................................ Drain Plug Spanner ...................................................................99
2.30 .............................. Industrial Puller Kit ..................................................................186 2A .................................. Heavy Duty Ring Spanner.......................................................12
2.40 ............................... Construction Machine Puller Kit.........................................186 2AR ............................... Extension Tube ...........................................................................12
20 EAU-3 ..................... Socket Set 1/4”............................................................................20 3019 ............................. Converter 3/8” to 1/2”...............................................................26
20 EMZ ........................ Socket Set 1/4”............................................................................20 3020 ............................. Reducer 3/8” to 1/4” ..................................................................27
20 MDX ........................ Socket Set 1/4”............................................................................20 304 ................................ Half-Moon Ring Spanner Sets ...............................................11
20 NZA ........................ Socket Set 1/4”............................................................................21 304 ................................ Half-Moon Ring Spanners (MM) (AF) ..................................11
20 NZI .......................... Socket Set 1/4”............................................................................21 306 ................................ Ring Slogging Spanners (MM) (AF) ....................................16
2030 ............................. Converter 1/4” to 3/8”...............................................................24 3081.............................. L-handle 3/8”................................................................................27
2087.............................. Sliding T-Bar 1/4” ........................................................................23 3087.............................. Sliding T-bar 3/8”........................................................................27
2088.............................. Flexible Extension 1/4”.............................................................24 3090.............................. Extension 3/8” .............................................................................27
2090.............................. Extension 1/4” .............................................................................23 3093-U3 ...................... Reversible Ratchet 3/8”............................................................25
2093-U3 ...................... Reversible Ratchet 1/4”............................................................21 3093-Z/94 .................. Reversible Ratchet & Coupler 3/8”.......................................25
2093-U10 ................... Reversible Ratchet 1/4”............................................................21 3094 ............................. Coupler 3/8”.................................................................................26
2093-Z/94 .................. Reversible Ratchet 1/4”............................................................22 3095 ............................. Universal Joint 3/8”....................................................................26
2094 ............................. Coupler 1/4”.................................................................................23 3096 ............................. Power Bar 3/8”.............................................................................27
2095.............................. Universal Joint 1/4”....................................................................24 3114.............................. Crowfoot Spanner .....................................................................17
2097.............................. Swivel Handle 1/4”.....................................................................23 3219.............................. Reducer 3/4” to 1/2” .................................................................46
2098.............................. Driving Handle 1/4”...................................................................24 3221.............................. Converter 3/4” to 1”...................................................................46
210 ................................ Chain Pipe Wrench ....................................................................87 3287.............................. Sliding T-bar 3/4”........................................................................45
2132.............................. Reducer 1“ to 3/4” AF................................................................49 3290.............................. Extension Bar 3/4”......................................................................45
2133.............................. 3C Nut Drivers .............................................................................67 3293 DJ........................ Repair Kit 3/4”..............................................................................46
2133.............................. 3C Nut Driver Sets......................................................................67 3293 U-1...................... Reversible Ratchet 3/4”............................................................43
2150.............................. 3C Screwdriver ...........................................................................63 3293 U-1...................... Repair Kit 3/4”..............................................................................46
2153.............................. 3C Stubby Screwdriver.............................................................64 3293 U-2...................... Reversible Ratchet 3/4”............................................................43
2150-2160 PH............ 3C Screwdriver Sets...................................................................65 3293 U-2...................... Repair Kit 3/4”..............................................................................46
2160 PH ....................... 3C Screwdriver ............................................................................63 3293 Z .......................... Repair Kit 3/4” .............................................................................46
2160 PZ........................ 3C Screwdriver ............................................................................63 3293 Z/94 .................. Reversible Ratchet 3/4”............................................................43
2161 PH ....................... 3C Stubby Screwdriver - Philip..............................................64 3293/500 .................... Double Johnny Ratchet 3/4”..................................................44
2163 TX........................ 3C Torx® Screwdrivers...............................................................64 3293/500-24x30 ....... Double Johnny Ratchet 3/4”..................................................44
2163 TX........................ 3C Torx® Screwdriver Set .........................................................65 3294 ............................. Square Coupler 3/4”..................................................................46
2187.............................. Sliding T-Bar 1” ............................................................................48 3295.............................. Universal Joint 3/4”....................................................................46
2190.............................. Extension Bar 1”..........................................................................49 3296.............................. Power Bar 3/4”.............................................................................45
2193 U-3...................... Reversible Ratchet .....................................................................47 3296.............................. Repair Kit 3/4”..............................................................................46
2193-Z94..................... Reversible Ratchet .....................................................................47 36................................... Oil Filter Strap Wrench .............................................................93
2194.............................. Square Coupler ...........................................................................49 38................................... Tyre Lever......................................................................................93
2195.............................. Universal Joint.............................................................................49 39................................... Tyre Lever......................................................................................93
220 ................................ Steel Pipe Cutter.........................................................................89 40................................... Hook Spanner .............................................................................17
2200.............................. Number Set ................................................................................131 400 ................................ Flare Nut Spanner (MM) (AF) .................................................13
2201.............................. Letter Set .....................................................................................131 4400.............................. Flare Nut Spanner Set...............................................................13
225 ................................ Pipe Wrench - Stillson Type ....................................................86 403 ................................ Hacksaw ........................................................................................98
227 ................................ Pipe Wrench - American Pattern ..........................................86 40Z ................................ Pin Spanner ..................................................................................17
227
ARTICLE INDEX

407 ................................ Hacksaw ........................................................................................98 7118 ............................. Open End Fitting ......................................................................165
4101.............................. Torcofix SE - Torque Wrench.................................................147 7212 ............................. Ring End Fitting ........................................................................165
4150 / 4151 ................ Torcofix FS - Torque Wrench .................................................147 7218 ............................. Ring End Fitting ........................................................................165
42................................... Allen Key Sets ..............................................................................68 7412 ............................. Ratchet Head ............................................................................166
42................................... Allen Key (MM) (AF) ...................................................................68 7418 ............................. Ratchet Head .............................................................................166
424 ................................ Tin Snips - Ideal Pattern ...........................................................89 753 ................................ Dremometer - Mini Torque Wrench...................................155
425 ................................ Tin Snips - Figure Pattern ........................................................89 754 ................................ Ratchet Head ............................................................................166
42KL ............................. Ball Head Allen Key Set ............................................................69 756 ................................ Torque Screwdriver .................................................................162
42L ................................ Allen Key .......................................................................................69 759 ............................... TSN Slipper Torque Wrench..................................................156
42L ................................ Allen Key Sets ..............................................................................68 760 .............................. Breaking Torque Wrench .......................................................159
42SCKL......................... Ball Head Allen Key Set ............................................................70 761 ............................... TSP Slipper Torque Wrench ..................................................157
42SCL ........................... Allen Key Set ................................................................................69 762 ............................... Slipping Torque Wrench ........................................................157
42T ................................ Allen Key (MM) (AF) ...................................................................69 7R ................................. Ratchet Spanner Sets ..................................................................9
43KTX........................... Ball Head Torx Key Set ..............................................................70 7R ................................. Ratchet Spanners ..........................................................................9
43TV ............................. Torx Gauge Tester ......................................................................71 8000 - A0-A4 .............. Circlip Pliers - External Straight.............................................82
43TX ............................ Torx Allen Key..............................................................................70 8000 - A01-A41 ......... Circlip Pliers - External Bent ...................................................82
43TX ............................. Torx Allen Key Set ......................................................................70 8000 - A5..................... Circlip Pliers - External Straight.............................................82
43TXL .......................... Long Torx Allen Key...................................................................71 8000 - A51 .................. Circlip Pliers - External Bent ...................................................82
43TXL ........................... Long Torx Allen Key Sets .........................................................71 8000 - J0-J4 ................ Circlip Pliers - Internal Straight..............................................83
44................................... Caliper Face Spanner ................................................................17 8000 - J01-J41 ........... Circlip Pliers - Internal Bent ....................................................83
4530.............................. Towrope ........................................................................................98 8000 - J5 ...................... Circlip Pliers - Internal Straight..............................................83
4549.............................. Torcofix K - Torque Wrench ...................................................147 8000 - J51 ................... Circlip Pliers - Internal Bent ....................................................83
4550.............................. Torcofix K - Torque Wrench ...................................................146 8112 ............................. Round Nose Pliers......................................................................76
4611.............................. Power Testing Screwdriver .....................................................66 8120.............................. Flat Nose Pliers ............................................................................76
5.10 ............................... Puller Safety Cover ..................................................................183 8132.............................. Telephone Pliers - Straight......................................................76
50................................... Spark Plug Socket ......................................................................93 8132AB ........................ Telephone Pliers - Angled .......................................................76
5017.............................. JAZZ Tool Assortment ............................................................101 8133.............................. Multiple Pliers..............................................................................77
502 ................................ Motorist Toolkit.........................................................................101 8135 ............................ Telephone Pliers .........................................................................76
534 ................................ Swivel Wrench .............................................................................10 8136.............................. Mechanic’s Pliers ........................................................................77
534 ................................ Swivel Wrench Sets ...................................................................10 8146.............................. Wire Stripping Pliers .................................................................79
54................................... Spark Plug Socket ......................................................................94 8147.............................. Heavy Duty Cable Stripping Tool .........................................80
55................................... Spark Plug Spanner ...................................................................94 8148 ............................. Stripping Tool for Data Cable ................................................80
58................................... Spark Plug Spanner ...................................................................94 8178 ............................ Bolt Cutters ..................................................................................88
6 .................................... Open Ended Spanners .............................................................14 8178 ............................ Bolt Cutter Spares ......................................................................88
62................................... Adjustable Wrench ....................................................................15 8200.............................. Torque Angle Indicator ..........................................................155
620C ............................. Club Hammers ..........................................................................132 8220 ............................. Universal Puller with Twin Grip ...........................................180
622C ............................. Copper Sledge Hammers ......................................................133 8250 ............................. Combination Pliers - Heavy Duty .........................................74
640S .............................. Sledge Hammers ......................................................................133 8260.............................. Fencing Pliers ..............................................................................74
640 ................................ Magnetic Lifter............................................................................95 8276 ............................. Balance-Weight Pliers...............................................................96
642 SP .......................... Magnetic Lifter............................................................................95 8301 / 8302 ............... Dial Measuring Torque Wrench...........................................161
647 ................................ Spark Plug Brush ........................................................................94 8316 ............................. Side Cutters - American Pattern ...........................................75
687 ................................ Screwdriver Bits - Torx ..............................................................75 8320 JL......................... Wire Rope Cutters ......................................................................79
690 ................................ Screwdriver Bits - PH.................................................................71 8340 / 8340Z ............. Mini Bolt Cutters.........................................................................88
690 ................................ Screwdriver Bits - PZD ..............................................................71 8380.............................. Tower Pincers ..............................................................................75
7 ..................................... Combination Spanners ...............................................................8 8381.............................. Pincers............................................................................................75
7 ..................................... Combination Spanner Sets .......................................................8 8516.............................. Tin Snips - Scissors Pattern .....................................................89
702 ................................ Feeler Gauge Set - Fan Pattern ..............................................97 8531.............................. Tin Snips - Straight Pattern .....................................................89
7112 ............................. Open End Fitting ......................................................................165 8551.............................. Bolt Extractor Set .....................................................................184
228
8554.............................. Dremometer Torque Wrench ...............................................152 Club Hammers ..........................................................................................................132-133

8560.............................. Dremometer Torque Wrench ...............................................152 Construction Machinery Toolkit.........................................................................196/197
8561.............................. Dremometer Torque Wrench ...............................................152
8562.............................. Puller - Twin Grip ......................................................................180 D
8562.............................. Dremometer Torque Wrench ...............................................153 D19 ............................... Socket (MM) (AF) 1/2”...............................................................36
8563.............................. Puller - Triple Grip ....................................................................180 D19 ............................... Socket Sets .............................................................................28-34
8563 D & DR............... Dremometer Torque Wrench ...............................................153 D19L ............................ Extra Deep Socket Bi-hexagon..............................................37
8564 ............................. Puller - Twin Grip ......................................................................181 D21 ............................... Sockets 1”......................................................................................48
8564.............................. Dremometer Torque Wrench ...............................................154 D21 EMU ..................... Socket Set 1” ................................................................................47
8565.............................. Puller - Triple Grip ....................................................................181 D30 ............................... Socket (MM) (AF) 3/8”...............................................................25
8566.............................. Puller - Twin Grip ......................................................................181 D30FMZ....................... Socket Set 3/8”............................................................................24
8567.............................. Puller - Triple Grip ....................................................................181 D30HMZ...................... Socket Set 3/8”............................................................................24
8568.............................. Puller - Twin Grip .....................................................................181 D32 ............................... Socket (MM) (AF) ........................................................................44
8569.............................. Puller - Triple Grip ....................................................................181 D32 ............................... Socket Sets .............................................................................42-43
8570.............................. Dremometer Torque Wrench ...............................................154 DMK .............................. Dremaster Torque Wrench ....................................................149
8571.............................. Dremometer Torque Wrench ...............................................154 DMSE............................ Dremaster Torque Wrench ....................................................149
8572.............................. Dremometer Torque Wrench ...............................................153 DT 2142-008 3C ........ Torx Screwdriver Set .................................................................65
8573.............................. Dremometer Torque Wrench ...............................................153 DVI-20L/Z & 28L/Z ... Dremoplus Torque Multiplier .....................................172-173
8600.............................. Stud Extractor ...........................................................................183 DVV-13Z ..................... Dremoplus Torque Multiplier .....................................170-171
8601.............................. Ball Pein Hammer.....................................................................130 DVV-540RS ................ Dremoplus Torque Multiplier ..............................................177
8612 ............................ Torque Calibration Analyser.................................................163 DVV-40Z & 40ZRS .... Dremoplus Torque Multiplier ..............................................175
8612 ............................ Electronic Tester .......................................................................163 DVV-60-130ZRS ........ Dremoplus Torque Multiplier ..............................................176
8612-3150 ................. Electronic Tester .......................................................................163
8801.............................. Torque Wrench..........................................................................160 E
907 ................................ Fender Protector ........................................................................99 E 142 A/10 .................. Spares - Screw & Nut.................................................................87
95................................... Flat Cold Chisel .........................................................................130 E 143 A/10 .................. Spares - Screw & Nut.................................................................87
95 HS ............................ Flat Cold Chisel & Hand Guard ............................................130 E 145 A/10 .................. Spares - Screw & Nut.................................................................87
96................................... Cross-Cut Chisel........................................................................130 E 210 A ......................... Spares - Chain..............................................................................87
96 HS ............................ Cross-Cut Chisel & Hand Guard ..........................................130 E 210 B ......................... Spares - Pair of Jaws ..................................................................87
99................................... Drift Punch .................................................................................131 E 225 A ......................... Spares - Frame.............................................................................86
E 225 B ......................... Spares - Knurl ..............................................................................86
A E 225 C ........................ Spares - Hook ..............................................................................86
Apprentice Toolkits ................................................................................................194-203 E 225 D ....................... Spares - Pin ...................................................................................86
Artisan’s Toolkits.......................................................................................................204-213 E 225 EF ...................... Spares - Rivet & Spring .............................................................86
ATB SE Adjustable Breaking Torque Wrench...........................................................159 E 227 A ........................ Spares - Spring ............................................................................86
Automotive Electrician’s Toolkit ..................................................................................199 E 227 B ......................... Spares - Knurl ..............................................................................86
E 227 C ......................... Spares - Jaw & Pin ......................................................................86
B E 227 D ........................ Spares - Hook ..............................................................................86
Brass Pump Oil Can ............................................................................................................98 E8000A ........................ Spares - Tips .................................................................................82
Breaker Torque Wrenches .....................................................................................158-160 E8000J ......................... Spares - Tips .................................................................................83
E-8147 .......................... Spare Blade ..................................................................................80
C E-8148 .......................... Spare Blade ..................................................................................80
C19 ................................ Socket (MM) (AF) 1/2”...............................................................36 E-8178 .......................... Replacement Cutting Head....................................................88
C19 ................................ Socket Sets .............................................................................28-34 Electrician’s Light Current Toolkit ...............................................................................206
C32 ................................ Socket (MM) (AF) 3/4”..............................................................44 Electrician’s Medium Current Toolkit .........................................................................207
C32 ................................ Socket Sets ...................................................................................42 Electrician’s & Refrigeration Mechanic’s Toolkit.....................................................200
Capture Calibration Analyser ..............................................................................163-164 Electrician’s Toolcase .......................................................................................................100
Car Workshop Puller Kit..................................................................................................187 Electrician’s Toolset .................................................................................................141/211
229
ARTICLE INDEX

Engineer’s Scriber ...............................................................................................................97 ITX19B.......................... Torx Allen Key Socket - Male 1/2”.........................................39
Engineer’s Square ...............................................................................................................97 ITX19L .......................... Long Torx Allen Key Socket - Male 1/2”..............................39
EV 150/200 ................. Spares - Engineering Vice .....................................................117 ITX20 ............................ Screwdriver Bit Socket 1/4” ....................................................23
EV150/200 .................. Engineering Vice ......................................................................117 ITX30 ............................ Torx Allen Key Socket - Male 3/8”.........................................26
ITX19/TX19 FMT ....... Torx Allen Key Socket Set - Male & Female .......................34
F
Farmer’s Toolkit .................................................................................................................208 J
Junior Hacksaw ...................................................................................................................98
G
G-Clamps ...............................................................................................................................99 K
General Artisan’s Toolkit .................................................................................................209 K19 ................................ Impact Sockets 1/2” ..................................................................53
GED0130 ..................... Non-Sparking Combination Spanners .............................190 K19 ................................ Impact Socket Set ......................................................................52
GED0130 ..................... Non-Sparking Combination Spanners Sets....................190 K1900 ........................... Impact Driver...............................................................................54
GED035 ....................... Non-Sparking Hexagon Sockets 1/2”................................191 K1900 ........................... Impact Driver Set .....................................................................52
GED0360 ..................... Non-Sparking Reversible Ratchet 1/2”.............................191 K19L.............................. Impact Socket .............................................................................53
GED042 ....................... Non-Sparking Extensions 1/2” ............................................191 K21 ................................ Impact Socket .............................................................................57
GED410 ....................... Non-Sparking Swivel Handles 1/2”....................................191 K21L.............................. Impact Socket - Long Pattern ................................................57
GED0400 ..................... Non-Sparking Sliding T-Bar 1/2” .........................................192 K32 ................................ Impact Socket .............................................................................55
GED0400 ..................... Non-Sparking Universal Joint 1/2”.....................................192 K32L.............................. Impact Socket .............................................................................55
GED0430 ..................... Non-Sparking Socket Set 1/2” .............................................192 K37 ................................ Impact Socket .............................................................................59
GED080 ....................... Non-Sparking Screwdriver Set ...........................................192 KB1932 ........................ Impact Socket Converter ........................................................53
GED053 ....................... Non-Sparking Pipe Wrench ..................................................193 KB1970/75 .................. Safety Rings & Pins ....................................................................54
GED048 ....................... Non-Sparking Adjustable Wrenches .................................193 KB1990 ........................ Impact Extension .....................................................................54
GED060 ....................... Non-Sparking Combination Pliers .....................................193 KB1995 ........................ Impact Universal Joint .............................................................54
GED066 ....................... Non-Sparking Power Side Cutters .....................................193 KB2132 ........................ Impact Socket Reducer ............................................................58
KB2137 ........................ Impact Socket Converter ........................................................58
H KB2170/75 .................. Safety Rings & Pins ....................................................................58
HSP ............................... Hydraulic Pressure Spindle...................................................182 KB2190 ........................ Impact Extension .......................................................................58
KB2195 ........................ Impact Universal Joint .............................................................58
I KB3219 ........................ Impact Socket Reducer ............................................................56
IKS19 ............................ Allen Key Socket - Phillips & Pozzidriv Bits 1/2”...............39 KB3221 ........................ Impact Socket Converter ........................................................56
IKS20 ............................ Screwdriver Bit Socket 1/4” ....................................................22 KB3270/75 .................. Safety Rings & Pins ....................................................................56
IKS20 PZD ................... Screwdriver Bit Socket 1/4” ....................................................23 KB3290 ........................ Impact Extension .......................................................................56
IN19 .............................. Allen Key Socket (MM) (AF) 1/2” ...........................................37 KB3295 ........................ Impact Universal Joint .............................................................56
IN19 .............................. Allen Key Socket Sets ...............................................................33 KB3721 ........................ Impact Socket Reducer ............................................................59
IN19L ............................ Extra Long Allen Key Socket 1/2” .........................................38 KB3770/75 .................. Safety Rings & Pins ....................................................................59
IN20L ............................ Screwdriver Bit Socket 1/4” ....................................................22 KB3790 ........................ Impact Extension .......................................................................59
IN30 .............................. Allen Key Socket 3/8”................................................................26 KD-26R......................... Tubular Box Spanner Set .........................................................92
IN32 .............................. Allen Key Socket 3/4”................................................................45
Industrial Puller Kit...........................................................................................................187 M
INK19............................ Impact Allen Key Socket 1/2”.................................................53 Mechanic’s Toolkit ............................................................................................................198
INK21............................ Impact Allen Key Socket 1”.....................................................58 Merchandiser Concepts ........................................................................................214-217
INK32............................ Impact Allen Key Socket 3/4”.................................................55 MV 100/150 ............... Spares - Mechanic’s Vice .......................................................117
INR19L ......................... Allen Key Socket - Long Spline Ribe 1/2”...........................38 MV 100/150 ............... Mechanic’s Vice.........................................................................117
INX19 - INX19L.......... Allen Key Socket - Spline Bit 1/2” .........................................38
IS20 ............................... Screwdriver Bit Socket 1/4” ....................................................23 N
ITX19 ............................ Torx Allen Key Socket - Male 1/2”.........................................38 Non-Spark Range ....................................................................................................188-193
ITX19 ............................ Torx Allen Key Socket Set - Male 1/2” .................................34
230
P Safety Glasses & Bag ......................................................................................................98

Pegboard Accessories ....................................................................................................118 Sledge Hammers ..............................................................................................................133
Precision Engineering Tools............................................................................................97 Steel Ruler .............................................................................................................................96
R T
REF 10SD .................... 10 ScrewdriverAssortment ...................................................126 TBN Breaking Torque Wrench ......................................................................................159
REF A ............................ C19/22 Assortment .................................................................124 Technician’s Rucksack Toolkit .......................................................................................210
REF B............................. C19 Assortment ........................................................................124 TLS PRO Preset Torque Screwdriver ...........................................................................162
REF C ............................ 1B Assortment ..........................................................................124 Tool Bags & Rucksacks ....................................................................................................100
REF D ............................ C19/IN19 Assortment .............................................................124 Tool Jacket ..........................................................................................................................100
REF E ............................. 1B/62H Assortment.................................................................125 Torque Screwdrivers ....................................................................................................162
REF F ............................. D19/ACC/SKT Assortment ....................................................125 TSC Slipper Torque Wrench...........................................................................................157
REF G ............................ C32/6 Assortment....................................................................125 TT3KH 350 ................. Torcotronic III Electronic Torque Wrench.........................160
REF H ............................ D19/22/ACC Assortment .......................................................125 TX19 ............................. Torx Socket - Female 1/2”........................................................39
REF I .............................. D19 Assortment .......................................................................125 TX19 ............................. Torx Socket Set - Female 1/2” ................................................34
REF J ............................. D19/IN19 Assortment ............................................................125 TX30 ............................. Torx Socket - Female 3/8”........................................................26
REF K............................. D32/6 Assortment ...................................................................126 TX4 ................................ Flat Ring Spanner.......................................................................11
REF L ............................. PL/137/36 Assortment ...........................................................126
REF MF ......................... PL/81/82/83 3 Pliers Assortment........................................126 V
REF M ........................... PL/81/82/83 3 Pliers Assortment........................................126 V 4614 PLUS .............. Voltage Tester ............................................................................140
REF N-10 ..................... 10 Screwdriver Assortment ..................................................126
REF O ........................... 6 Screwdriver Assortment ...................................................127
REF OF ......................... 6 Screwdriver Assortment ...................................................127 VDE 2160 PH ............. Phillips Screwdriver .................................................................137
REF P ............................ 4 EXT - T/BAR Assortment .....................................................127 VDE 2170 ................... Electrician’s Screwdriver ........................................................137
REF PF ......................... 4 Extension + T/Bar Assortment .........................................127 VDE 2133 .................... Nut Driver ...................................................................................136
REF Q ........................... 4 ACC - Power Bar Assortment ...........................................127 VDE 2133 .................... Nut Driver Set ............................................................................136
REF QF.......................... 4 Acc+Power Bar Assortment ..............................................127 VDE 2E ......................... Single Ended Spanner ............................................................136
REF RF .......................... C19/Z94 Assortment...............................................................127 VDE 4507 .................... Torque Wrench..........................................................................137
REF SF .......................... 1B/145 Assortment .................................................................127 VDE 4522 .................... Cable Knife .................................................................................140
REF VF ......................... Ph & Stubby Screwdriver Assortment ..............................126 VDE 8098 H ................ Stripping Pliers..........................................................................138
REF WF ........................ Mec & Elec Screwdriver Assortment .................................126 VDE 8099 H ................ Stripping Pliers .........................................................................139
RL-DVV13 .................... Reaction Arm .............................................................................171 VDE 8120 H ................ Flat Nose Pliers .........................................................................139
RL-DVV-60-80 ............ Reaction Arm .............................................................................176 VDE 8122 H ................ Round Nose Pliers....................................................................139
RL-DVI 20/28 .............. Reaction Arm .............................................................................173 VDE 8132 H ................ Telephone Pliers .......................................................................138
RL-DVV40 ................... Reaction Arm .............................................................................175 VDE 8132AB H........... Telephone Pliers - Angled .....................................................139
VDE 8250 H ................ Combination Pliers ..................................................................138
S VDE 8314 H ................ Side Cutters ................................................................................138
S8000 ........................... Circlip Pliers Set ..........................................................................84 VDE 8316 H ................ Side Cutters - American Pattern .........................................138
S8000 AE ..................... Circlip Pliers Set ..........................................................................84 VDE 894 ...................... Single Open Ended Spanner................................................136
S8000 JE ...................... Circlip Pliers Set ..........................................................................84 VDE 2160-2170 ......... Screwdriver Set .........................................................................137
S8003 JC ..................... Pliers Set ........................................................................................78
S8140 A ....................... Crimping Pliers Set - Automotive.........................................81
S8140 D ....................... Crimping Pliers Set - Data Com.............................................81
S8140 E ........................ Crimping Pliers Set - Electronics...........................................81
S8140 J ........................ Crimping Pliers Set - Industustrial .......................................81
S8303 JC...................... Pliers Set ........................................................................................78
S8393 ........................... Pliers Set ........................................................................................78
Sortimo General Tool Assortment .............................................................................101
231
ARTICLE INDEX
232
MISSION STATEMENT DISCLAIMER “Our guarantee covers all
tools against breakage
As we are constantly improving our products, we reserve the right to make changes as the need arises.
The actual products delivered may therefore vary from those depicted in the catalogue. under normal working
Gedore strives to be the leading supplier of superior quality We do not provide any warranties in connection with technical and safety information provided in this catalogue. All customers are therefore advised to refer conditions and is subject
tools in Africa and other designated markets. directly to their manufacturer’s specifications and the advice and standards of the relevant professional/trade associations.
All products remain the property of Gedore Tools SA (Pty) Ltd until paid for in full.
to fair wear and tear.”
We seek to build and maintain lasting relationships with customers We cannot accept any liability for printing errors.
by responsively offering suitable products at fair prices, Reproduction of any part of this catalogue requires the prior written permission of Gedore Tools SA (Pty) Ltd.
which consistently conform to the highest level of product and All rights reserved worldwide.
service quality standards.
We strive to increase the value for all stakeholders and to be a

preferred supplier, employer and customer.
GEDORE TOOLS SA TORQUE WRENCH WARRANTY &

WARRANTY POLICY CALIBRATION POLICY
At GEDORE we take pride in the quality of our products and services and we review all warranty
VALUE SYSTEM claims with the aim of using the information gained for further product improvement.
Warranty
In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee
against defective materials and workmanship. Provided that the tool has been correctly used for
Every GEDORE tool is covered by a lifetime guarantee against defective material and workmanship.
its intended purpose and allowances have been made for the wear and tear of moving parts, the
Provided that the tool has been used correctly for its intended purpose and allowances have been
torque wrench will be repaired free of charge.
Quality made for wear and tear, this guarantee will allow for the repair or exchange of the tool.
We strive to be the best that we can be in everything that we do. The warranty does not cover torque wrenches which have been misused or which have experienced
While some deterioration through extensive use might be unavoidable, we will adopt a generous
wear and tear through extensive use.
Innovation and Knowledge approach when viewing warranty claims. We do, however, set warranty limitations on wear and tear,
We strive for continuous improvement in all aspects of our business obvious misuse, missing parts and purposely altered tools to protect ourselves against unreasonable
A warranty return will be assessed by our technical staff and if the return falls outside of our war-
through learning, benchmarking and having a general uneasiness claims.
ranty policy, the customer will be notified and quoted for the repair.
with the status quo.
Should the product fall outside the parameters of the warranty criteria, we will advise the customer
Calibration
Responsiveness on the repair or replacement cost of the article.
A standard calibration and the issue of a test certificate will be provided as standard practice on
We have a bias for action by feeling a sense of urgency in everything any repair conducted.
that we do, and encourage employees to be proactive.
A SANAS calibration and the issue of a SANAS calibration certificate will be done on request at a
Team Work and Mutual Respect nominal charge.
We encourage and support team participation, effective
communication and mutual respect. Obsolescence
Please note that while GEDORE uses its best endeavours to carry significant stocks of spares to
Motivation and People Centred support its torque wrench product range, some spares for older discontinued items are no longer
We acknowledge that our employees are the key to our success. available. In such cases, repair of the torque wrench may not be possible.
© Copyright by Gedore Tools SA (Pty) Ltd.
We motivate employees by providing opportunities for advancement,
sharing information, fair treatment, training, job security and
workplace safety.
Customer Focused
We expect all employees to maintain a customer focus in all aspects
of their work.
Care for the Environment

We are sensitive of the need to care for the environment and apply our
business processes accordingly.
Corporate Governance
We enforce good corporate governance by encouraging honesty,
transparency, trust, equity and social responsibility.
TradeZone NZ Locations
ASHBURTON (03) 308 3147 NORTH SHORE (09) 414 7214
DARGAVILLE (09) 439 7335 OAMARU (03) 434 6956
FRANKTON (07) 847 4994 PALMERSTON NORTH (06) 357 8888
GISBORNE (06) 868 8214 PUKEKOHE (09) 238 1800
GORE (03) 208 4882 RANGIORA (03) 313 3425
HASTINGS (06) 870 4450 ROTORUA (07) 347 9110
TOTALRANGE
HAWERA (06) 278 4185 TAKAKA (03) 525 9847
20 20
INVERCARGILL (03) 218 2059 TE AWAMUTU (07) 871 7062
MORRINSVILLE (07) 889 7681 TE RAPA (07) 847 4994
MT MAUNGANUI (07) 575 0504 TIMARU (03) 684 7036
NAPIER (06) 842 2304 TOKOROA (07) 886 1700
NELSON (03) 547 8000 WANGANUI (06) 344 4804
NEW PLYMOUTH (06) 758 5133 WESTPORT (03) 789 7033
NORTH
SHORE
PUKEKOHE
FRANKTON MORRINSVILLE
TE RAPA MT MAUNGANUI
TOKOROA
TOTALRANGE
TAKAKA
RANGIORA
ASHBURTON
2020
OAMARU

Gedore Catalogue

Uploaded by

Copyright:

Available Formats

Gedore Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gedore Catalogue

Uploaded by

Copyright:

Available Formats

TradeZone NZ Locations

ASHBURTON (03) 308 3147 NORTH SHORE (09) 414 7214

We strive to increase the value for all stakeholders and to be a

GEDORE TOOLS SA TORQUE WRENCH WARRANTY &

Care for the Environment

GEDORE Werkzeugfabrik, is a family-owned GEDORE operations are ISO-accredited, and all

SOCKETS & ACCESSORIES 18-49

IMPACT SOCKETS & ACCESSORIES 50-59

AUTOMOTIVE & SPECIAL TOOLS 90-101

SHEETMETAL & TOOL ASSORTMENTS 102-127

STRIKING TOOLS 128-133

VDE INSULATED SAFETY TOOLS 134-141

TORQUE TOOLS 142-177

NON-SPARKING TOOLS 188-193

ARTISAN TOOLKITS 204-211

COMBINATION SPANNERS RATCHET SPANNERS RING SPANNERS

FLARE NUT SPANNERS OPEN ENDED SPANNERS ADJUSTABLE WRENCHES

SLOGGING SPANNERS HOOK SPANNERS CROWFOOT SPANNERS

NO. 1 B – THE STRONG ALL-ROUNDER

Jaw: ground precisely to exact nominal

UD PROFILE protects bolt heads

The contact surface area between the 4

*WHILE STOCKS LAST

Code ! " Contents 0

SLOGGING SPANNERS 16 1425/41/1B FOAM ASSORTMENTS 1 22

NO. 7 – SLIM LINE

Code Contents 0 Code Contents 0

Swivel Head Wrenches Double Ended Ring Spanners

534 3 NO. 2 – RING SPANNER

Code ! Contents 0 Code ! y 0

FLAT RING SPANNERS -

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA

Code 9 + & y 0 Code ! Contents 0

Deep Ring Spanners Friction Type Ratchet

› Chrome plated, polished open rings.

Ring 15° offset from shaft Hexagon gap 30° offset,

400 (MM) / 400 (AF) 3

› Chrome Vanadium steel 31CrV3.

› Chrome plated, polished open rings.

Open Ended Spanners

NO. 6 – STRONG AND ACCURATE

Jaw: ground precisely to exact nominal Secure grip due to slim

306 (MM) / 306 (AF) 133 (MM)

*WHILE STOCKS LAST *WHILE STOCKS LAST

*WHILE STOCKS LAST / INDENT ONLY

(1/4”) SETS / RATCHETS (1/4”) SOCKETS / ACCESSORIES (3/8”) SETS / RATCHETS

(3/8”) SOCKETS / ACCESSORIES (1/2”) SETS / RATCHETS (1/2”) SOCKETS / ACCESSORIES

(3/4”) SETS / RATCHETS (3/4”) SOCKETS / ACCESSORIES (1”) SETS / RATCHETS /

Socket Manufacturing Process

(1/4") square drive

Code No. Ratchet Sockets Accessories 0

Code No. Ratchet Sockets Accessories 0

2093 U-3 R 2093 U-10 m

Code No. a„ a A° y 0 Code No. a„ a A° y 0

2093 Z-94 R 20L (MM) R

hexagon SCREWDRIVER BIT SOCKET 1/4"

SCREWDRIVER BIT SOCKET 1/4" Code No. a„ a y 0

SCREWDRIVER BIT SOCKET 1/4"

Code No. < PZ y 0

FLEXIBLE EXTENSION 1/4"

WHILE STOCKS LAST WHILE STOCKS LAST