OIL & GAS

PLATFORM SERVICES
 A BO U T JOULON
JOULON offers comprehensive asset management services to the energy industry
through its portfolio of established manufacturers and service providers, complemented
by a global team of experts with decades of asset ownership and management experience.

At Joulon, we provide the complete range of offerings from individual products and services to integrated end-to-end asset
management solutions. We employ the industry’s latest technologies and processes to provide the entire suite of solutions to our
customers as they continuously look to improve the efficiency of their asset ownership and operations.

We are continuously enhancing our portfolio in order to become the world’s preferred integrated solutions provider of engineering,
maintenance, repair and overhaul services to asset owners and operators in the energy industry. Joulon was founded in partnership
with KKR, a leading global investment firm with deep industry and investment expertise. Together, we provide a differentiated set of
capabilities and expertise to the oil and gas industry.

Page 1
I N T R ODUCTI ON
Harris Pye offers clients in the industrial sectors unique and innovative solutions, whilst
still upholding exceptional performance, quality and safety levels.
Harris Pye offers in - situ repair, upgrade and conversion of rigs, semisubmersibles, trading tankers, FSU, FSO, FPSO and FSRU
units, and inspection and consulting services for the LNG industry. Our state- of- the-art, in-house facilities enable us to provide
comprehensive overhaul, conversion and refurbishment services. Our expertise includes automation and control engineering;
electrical work, construction steel works, high and low-pressure pipework, specialist welding, heat treatment and mechanical works,
including pumps and compressors, HVAC, accommodation modules and outfitting. We were involved in pioneering projects in the
1980s, when FPSOs and FSOs were still experimental. We made key contributions to developing the safe use of dual fuel for boilers,
as well as safe and practical application and installation methods. We have been involved in more than 45% of the world’s FPSOs from
conversions to new builds.

Our underlying strengths

Quality Environmental

• Fully approved LRQA to current ISO 9001 for • ISO 14001

all project repair requirements • Manage internal recycling programs
• API accredited at UK facility • Commitment to protection of the environment
• EN1090 EXC 2 accredited at UK facility • Consideration of Life Cycle Perspective
• ASME S, R and U accredited • Green technology: Ballast Water Systems, Low Sulphur
• Credibility and Emission Systems
• Integrity • Efficiency improvements through design
• Product and service conformity

Safety Performance

• BS OHSAS 18001 • Efficient customer service

• Full risk analysis • Providing top quality services: repairs, upgrades,
• Safety inductions conversions, audits
• Project HSE advisors
• Legal compliance
• Positive safety behaviour
• CDM compliance
• Hazard analysis

Page 2
Engineering Design
and Project Execution

Engineering Design Harris Pye ensures after sales support for all projects undertaken.
Engineering design is a series of steps which leads towards a
complete solution. The life cycle of a project is usually initiated by
a conceptual design or design requirement. This process can then
be brainstormed and a preliminary feasibility of the ideas and
designs can be collated. This may consist of preliminary sketches,
analytical decisions on the materials, construction, installation,
manufacturing and fabrication process, maintenance, financial
feasibility and the time scale of the project.

Design Process
All designs will be to a regulatory code or standard, which outline
the minimum requirements for a particular region or area. The
codes and standards also provide the analysis procedures
required for different types of structures. The purpose of these
regulatory codes or standards is to ensure a safe design life for the
intended purpose of the structure/building, in all eventualities.

Project Planning
During planning, we detail all stages of the project time scale,
design and analysis, construction/installation and maintenance.

Project Execution
Harris Pye offers a full turnkey solution for all client’s projects if
required. We can handle everything from the initial client enquiry
and on-site survey, through to detailed design engineering,
on-site installation and final commissioning. A senior project
engineer is available 24/7 and is able to mobilise at any time.

Once the plans have been finalised, the

review process is required to investigate the
environmental impact and efficiency of the
design.
Structural
Steel

Harris Pye is a key player in the provision of marine and offshore The cutting section has a guillotine with the ability to cut 20mm
structural steelwork, with our own in-house design, engineering, plate over a 3m length. It also has a CNC plasma and flame cutting
fabrication, installation and quality departments. This allows us facility, capable of cutting 100mm thick plate on a 2m x 4m bed.
to provide full turnkey project packages to clients.
Within the rolling department, there are two sets of plate rolls
We have our own (class approved) welding and fabrication able to roll from 5mm up to 65mm thickness over a 3m width,
procedures, which eliminates the need for any additional costs and able to pre-bend 55mm plate. There is also a section roll able
to our clients. to roll pipes up to 6 inches schedule 80.

With a vast range of the latest technology (including our own We have two Pedrazzoli tube bending machines, with the
3D Laser Scanner and stress analysis software) we can provide a capacity to bend to a maximum of 76mm OD X 6mm wall, as well
second to none stress and alignment analysis service as various tube reshaping and pressing machines.

Products supplied include: The welding section has an Armco column and boom submerged
• Hull plates arc-welding machine that can competently weld 4.5m in
• Stiffeners diameter, over a 6m track with roll manipulators. Our manual
• Foundation steelwork welding capabilities are extensive, with hundreds of coded
• Platforms welders and welding procedures.

The fabrication workshop located in South Wales is 98m x 46m, In our UK workshop there are large areas of floor space which can
with two overhead gantries providing a 30 tonne lifting capacity be utilised for laying out and fabrication assembly.
with 5m of head room. The same workshop has large roller
shutter doors at either end allowing for materials to enter the In addition to this, we have our own in-house blasting bay and
workshop via the material control department and straight in separate temperature controlled paint bay. Within our main
to the cutting section. From this section it moves through to the workshop, we have segregated stainless steel pipework and
workshop and finally undergoes stringent inspections under the fabrication shops.
QA department’s strict standards.

We offer the highest quality and grades

materials to ensure we meet the requirements
of our clients and also classification society
approval.
 Mechanical
Services and
Pipework
Mechanical Services
Engine Overhaul
Harris Pye can offer a full overhaul and reconditioning service for
all types of engine. The service can be provided via riding squads,
or at our fully equipped workshops operated by fully trained and for cooling water, hydraulic control systems, fire fighting systems,
experienced repair technicians. etc. are offered in a wide range of specialist materials such as:

In-Situ Machining • Ferrous

Using our own portable grinding equipment, we are able to offer • Non-ferrous tubing, pipes and fittings
on-site reconditioning of the following items: liner landing faces, • Cryogenic
entablature landing faces and valve pocket landing faces. We are • PVC
also able to machine, in-situ, all types of valves including inlet, • GRP
exhaust and starting air types. • Hydraulic
• Stainless steel pipes and fittings
Other Mechanical Services
Harris Pye also offers a full range of mechanical services including The full design service includes initial survey; production of
pump overhaul, generator refurbishment as well as chemical drawings for Class approval by way of a full CAD system; and
cleaning. preparation of a full scope of work and specification of materials.
The design, supply and installation process is carried out in full
Pipework accordance with Harris Pye’s ISO 9001 Quality Assurance system.
Harris Pye offers clients a full design and installation service for This system ensures full traceability of all aspects of a particular
pipework and high pressure pipe line systems. Pipework systems project.

Page 5
Offshore
Retrofit

Harris Pye offers full turnkey solutions for installation and

integration of retrofit and 3rd party equipment. We have
completed installation of Vendors Equipment includes;

• Shale Shakers
• Mud Pumps
• Seatrax Cranes
• MPD (Managed Pressure Drilling)
• FLAG (Fluid Loss and Gain)
• High Pressure Manifolds

Our in house engineering and design team complete a full Once site installation is ready for execution we can mobilise from
feasibility and integration study. A complete engineering any of our stations - again based globally - with high skilled and
package is assembled and submitted for class approval, as and trained professionals who have experience with shipyard and
when required. offshore works.

Once approved the scope of work can be executed accordingly, We have produced many solutions for ‘new build’ vessels and
with fabrication being completed within one of our many vessels undergoing new upgrades to conform to ever changing
workshosp ideally situated across the globe to meet any of our safety/environmental standards, as well as new technological
client’s logistical needs. advances.
Instrumentation Services
and Electrical Swtichgear

Instrumentation Services Electrical Switchgear

Instrumentation engineers are able to design, build, install, Maintenance and servicing of marine control and instrumentation
commission and maintain electrical and instrumentation control is the core activity of Harris Pye. Our engineers have a wealth
systems. We work for the marine, oil and gas, petrochemical and of experience in pneumatic and electronic control systems
power industries in the following areas: in marine and land-based industries. We can offer service and
repairs to all types of control equipment.

• Boiler combustion control, burner management The servicing of high voltage electrical equipment and
and feedwater control systems switchboards is of a specialised nature. The competence of
our engineering staff means that we can undertake a wide scope
• Alarm, monitoring and data acquisition systems
of works, including:
• Inert gas control systems

• Process pressure / temperature / level / viscosity

control systems • Switchboard survey

• Cargo handling control systems • Thermographic imaging
• Fixed and portable tank gauging and monitoring • Servicing / calibration of protection devices
systems • Servicing of breakers / current injection testing
• Fire and safety system servicing and certification • Design, installation and commissioning of new or
• Service, repair, calibration and certification of fixed retrofit systems
and portable gas detection equipment
Hazardous
Areas

Harris Pye oers surveys of electrical systems within hazardous defined hazardous areas, as described earlier. The inspectors
areas on board operational and new-build MODUs. This is then record any faults so that corrective measures can be
completed by qualified Compex inspectors to IEC and API implemented. They simultaneously provide a detailed schedule
standards. The Eex register is compiled for individual Eex for all equipment inspected, specifying the manufacturer, model,
fittings, each being photographed with position mapping for zone rating, zone class where equipment is installed, serial
initial remedial work, future surveys and monthly maintenance number, gas group, temperature group, certifying authority
requirements. and their reference number. Alongside the listed information,
each piece of equipment will have a photograph included for
Operational Rigs reference. In conjunction with this, a set of gridded drawings
On operational rigs we can use the vessel’s existing Eex register will be made, to show individual pieces of equipment and their
and the hazardous area zone drawing to inspect all items which locations
should be classified as Eex. During this process, the inspectors
look for the correct zone rating, correct installation of equipment,
From here, our team is able to draw up a
correct labelling and tagging, any existing damage to the
equipment, equipment installation in the incorrect zone or not
new register or amend the existing one
on the register and likewise for equipment on the register which to display all findings.
has since been removed.

We also draw up a schedule to highlight faults found, including a

recommended course of action to rectify these. All work scopes
Protective
Coatings
are carried out by qualified Compex Inspectors.

New - Build Rigs

For new-build rigs, Harris Pye works in conjunction with shipyards Protective coatings for tube plate protection are 100% solid
on the as-built BOM and hazardous area zone drawings. From polymeric epoxies, formulated to cope with conditions such as
here, the teams are able to inspect all equipment within the abrasion, corrosion, contamination and galvanic action.

Page 8
 Scaffolding
and Deck Boilers

Scaffolding Deck Boilers

Harris Pye’s scaffolding division is one of the safest and most

professional commercial scaffolding companies available to the
marine and oil & gas industries. Our scaffolding service provides
competitive, safe and professional scaffold erection globally.

We offer a wide range of access solutions, from conventional tube

and fitting systems scaffolding, through to an innovative industry
solution - the Quikdeck system. This system can drastically reduce
the scaffolding’s construction time, transferring the resource
benefits directly to the client.

We pride ourselves on our staff training and dedication to health

and safety. We invest heavily to ensure our teams have the best
knowledge and working practices, in order to accommodate our
customers’ needs.

All boilers are designed and manufactured

in accordance with ASME BPVC.

These boilers, which are intended primarily for use on marine

installations, can easily be adapted and modified for use in any
number of applications where there is a requirement for power
and / or process steam.

Each boiler package will be custom designed to meet the

requirements of individual customers. We can undertake all
aspects of the design in-house. These include - but are not
limited to - thermal design and associated activities, skid and
module design and layout, including stress analysis, as well as
naval architecture requirements.

Harris Pye will be responsible for all aspects of design

engineering, manufacture, installation and commissioning,
including after care of the boilers and all associated module plant
As the leading scaffolding service and equipment.
provider to the oil & gas industry, we are
able to offer highly competitive service The boilers and associated equipment are available either fully
levels at a competitive price. assembled or in flat pack form from the Harris Pye manufacturing
facilities in UK, China, UAE, Singapore or Brazil.

Page 9
Heat Exchangers
and Condensers

Harris Pye offers a worldwide service for heat exchangers and

condensers. We specialise in the repair and restoration of the Chemical and Mechanical Cleaning
following: Our cleaning system utilises several methods, including Teflon
coated jet brushes that are propelled through the tubes at high

• Main condensers speeds using compressed air and water. In addition to this, we
have several other types of cleaning methods available
• Auxiliary condensers

• Feed heaters Inspections

• Cargo heaters Inspections, with the aid of three ball micrometres and full colour
video optic equipment, are carried out by a team of technicians
• Jacket water coolers
prior to repairs.
• Oil coolers
We maintain large stocks of various sizes and grades of fully
certified materials for immediate delivery:
Re-tubing
By deploying highly skilled teams of technicians around the
• Copper alloys
world we can carry out complete retubing of main and auxiliary
condensers, feed heaters, cargo heaters, jacket water coolers and • Carbon steels
oil coolers. • Inconel

• SMO
Tube Inserts
We can restore many failed units to full working order, where the • Stainless steels

defect is known to be tube-end corrosion or erosion, by way of • Super duplex

the tube insert method. • Titanium

Page 10
 Skid
Manufacture

Harris Pye has built a solid reputation for both engineering

design and manufacture of various skid mounted equipment
for offshore and onshore hydrocarbon recovery and treatment
applications.

Pumping, cooling, water treatment, RO and steam injection

for recovery are all applications where Harris Pye has supplied
multiple clients with batches of skids.

We have all the engineering disciplines in-house to complete the

mechanical, electrical and instrumentation requirements of the
skid.

The skids are manufactured in one of our many global facilities,

depending on the client’s region of operation’ and if required
they can be installed and commissioned.

Our experience in carbon, stainless and more exotic duplex

materials means that all requirements can be met locally. This
reduces the time needed to put the equipment to work for
meeting production targets. Full materials and equipment
selection is also available, and we will cooperate with specified
sub suppliers if applicable.

Page 11
Accommodation
Outfitting, Galleys
& Modules

We create the right solution

tailored to the client’s needs and
budgets.

Outfitting Capabilities Accommodation Modules

Harris Pye has gained a formidable reputation over the years for The modules offered by Harris Pye come in a range of sizes:
the design, manufacture and installation of a myriad of elements, 12.2m/40ft, 9.8m/32ft, 7.8m/26ft and 6.1m/20ft. Modules can be
which allows us to provide complete packages. made to accommodate 1, 2, 4 or 8 men depending on the cabin
layouts and number of bunks per cabin specified.
From our specialist workshops, we can carry out all elements of
the manufacturing process in-house, to the highest standards. Our modules can be delivered with either A60 windows or A60
Installations can be carried out by our skilled fitters during refits, hatches. In addition, all modules are equipped with wet rooms
new builds or whilst in service worldwide, via our mobile work in each cabin. Modules can also be H60 fire-rated if required, and
squads. are compliant with current SOLAS regulations.

Design The standard features of our modules include DNV (BS EN 12079)
Operating both in marine and land based environments, our or ABS certification, HVAC system, A60 or H60 fire-rating, fire and
outfitting department offers bespoke design concept services gas detection system, sprinkler system, emergency lighting, full
to our clients, ensuring that the best solution is chosen to meet automatic shutdown (CPFG panels – optional), fire dampers, PA/
needs and budgets. TV/ Tel sockets and connections. Modules can be adapted to suit
a variety of needs including, but not limited to, galleys, recreation
Our in-house design team uses state-of-the-art, 360 degree rooms, canteens, laundries, locker rooms and offices.
scanning equipment and software to design minutely accurate
solutions, and create stunning walkthrough 3D designs. This Accommodation modules can be utilised as either standalone
negates errors whilst ensuring fast turnaround. units or linked and stacked together to form multi-purpose, multi-
level accommodation complexes. Linking kits are waterproof,
We work with the client’s contractors, ship builders and managers providing a watertight barrier, and are supplied with each
to arrive at the most suitable layout, products and coverings. module. The structures are designed to link together efficiently
and thus minimise valuable installation time.

Page 12
Manufacture and Installation
Our highly skilled and experienced outfitters ensure that all
stages of programming and works undertaken comply with all We design, manufacture and
the latest class and quality assurance regulations. Our services install state - of - the - art galleys.
are guaranteed accordingly.

Many clients require turnkey packages, so it’s common for our

department to work with other divisions on large projects. The emergence of Norovirus on cruise vessels has led to enhanced
This greatly aids the planning and execution of extensive work regulations for hygiene standards on ships. These particularly
scopes. apply to the construction methods used to manufacture food
preparation facilities. Both the United States Public Health (USPH)
Installations are carried out both during vessel refits and whilst and United Kingdom Public Health (UKPH) agencies are placing
the ship is in service. The latter requires a riding squad of great emphasis on these matters. All our marine installations
engineers and fabricators. We are well versed in this practice, comply stringently with both USPH and UKPH requirements.
with personnel on standby to travel at short notice and to work
at sea for extended periods on scheduled projects. Harris Pye also has an excellent track record in onshore projects
– namely stainless steel pipework. Our teams offer complete
Galleys and Bespoke Stainless Steel solutions, from design and manufacture to installation, according
We have vast experience with installing galley equipment on to the client’s requirements. The team has completed extensive
ships worldwide and working to tight deadlines. These are projects, including food preparation areas, galley equipment,
completely built on our premises so that clients can view the beverage stations, galley troughs, washrooms, deck clearing
installation prior to fitting. stations, bars and pantries.
Marine and Offshore
Refrigeration and HVAC We offer turnkey chilled water design,
supply and installation packages.
Refrigeration Provision Plant / Cold Rooms
Our experienced team offers a full design service, including
insulated cold rooms for chill and deep freeze, and a repair Cargo Systems
service for all refrigeration equipment - compressors, condensers, In addition to the above, we offer servicing, repair and overhaul
evaporators, receivers, oil separators and more. We use state-of- for classification requirements for cooling (primary) for L.P.G.
the-art equipment and deal with all the leading manufacturers, cargo systems and inert gas cooling systems, along with all
such as Carrier, York, Bitzer and Sabroe Daikin. Our team can also refrigerated cargo plants.
retrofit refrigerants to conform with the latest legal (flag state)
requirements. HVAC Ductwork
Our teams offer full design, manufacture and installation of HVAC
Air Conditioning Systems ductwork.
We offer full design of new systems or repair / upgrade of
existing systems, including all refrigeration equipment, AHUs (air Our system offers excellent thermal and acoustic performance in
handling units), ductwork, fire dampers, air outlets, insulation a fire-safe system, providing an economical and efficient solution.
(thermal and fire) and full electrical and automatic controls, all of
which fully conform to classification requirements. We also offer We offer pre-insulated spiral wound ductwork as well as bespoke
packaged air conditioning units for engine control rooms, cargo ductwork all of which are manufactured in accordance with
control rooms and smaller workshop areas, with a full range of the latest ASHRAE guidelines, SOLAS Regulations and DW144
explosion proof, zone-rated equipment. specification. We offer a system which excels in terms of thermal

Page 14
 performance producing significant energy savings whilst the ability to offer full design, procurement and installation of all
remaining durable and suitable for all acoustic applications with electrical works including:
superior sound attenuation. • Small power and lighting systems
• Fire and gas detection systems
Furniture and Furnishing • Variable speed drives (ventilation)
All furniture can be bespoke designed and made to measure:
• Steel – available in a wide variety of RAL colours
• Laminate – available in many styles and varieties, including
‘new wood’ style laminate finishes
• Upholstery and curtains – wide selection of fabrics and
leathers; all IMO approved
• Flooring – all styles of laminate, hard flooring, carpets and
vinyl supplied and fitted, including ‘Amtico’ style flooring
• Joinery
• French polishing

Insulation
Our range of marine products provides excellent fire, thermal
and acoustic performances combined with substantial weight
savings. We have an extensive team with the ability to provide We have the capability for provision and installation of new
installation of industrial thermal insulation and cladding to galley supplies as per client specifications and requirements as
both high and low temperature piping, containment vessels well as design and installation of distribution boards.
and exhaust systems as well as assistance on plant shut downs.
The specialist teams offer maintenance of insulated plant and Our services allow for integration into existing systems including
equipment, acoustic insulation solutions for noise problems and PA/GA and IT, our projects are completed following all statutory
passive fire protection. and regulatory requirements. This is all supported by a complete
set of test and commissioning documentation which is provided
For the marine fire divisions we are able to offer expert assistance to the client.
and advice in the design and installation of fire divisions the
group offers access to an extensive knowledge database on Plumbing and Pipefitting
insulation issues associated with critical areas such as engine Harris Pye has a solution for all types of pipe installations. Our
rooms, vehicle decks, bulkheads, deckheads and penetrations. design team can tackle any problem from new build to retrofit.
We build off-site with the latest laser scan technology and
The insulation division is able to offer complete life vessel our experienced engineers are fully conversant in all types of
support and maintenance arrangements for fire divisions plumbing and pipe fitting to the highest standards. Harris Pye
including supply and installation of other fire boundary devices mobilise riding crews globally 24/7, to all marine and offshore
such as doors, dampers and penetrations, profile wrap fire projects whether it be from plumbing in a wet unit to high
divisions, modular panel systems as well as high temperature pressure pipe installations.
exhaust system insulation in adherence to classification society
requirements. Our engineers have been trained in all types of installation for
standard marine and offshore installations as well as materials
including carbon steel, copper, cupronickel, stainless steel and
Our team has extensive experience UPVC, be it sanitary to fresh water, chilled water and refrigerant
within conventional marine and grade copper.
high-speed craft industry
Specialist materials include:

• Instaflex Fusion welded UPVC

We have developed insulation solutions for structural fire
protection to meet stringent International Maritime Organisation, • Loro – black and grey water pipework
commercial and military standards. • Refrigerant grade copper

• High pressure pipework and gas lines

Electrical
Our extensive team of skilled electricians and technicians hold • Mapres – stainless steel seamless pipe

Page 15
Europe North America
Harris Pye United Kingdom Ltd Keppel Marine Agencies
Hangars 5 & 6 5177 Richmond Avenue Suite
Bona Road, Llandow Trading Estate 1065 Houston, Texas USA 77056
Near Cowbridge, Vale of Glamorgan Tel: + 1713 600 8371
CF71 7PB Fax: + 1713 600 8374
Tel: +44 1446 720066 Email: john.bajor@keppelom-usa.com
Email: hpuk@harripye.com

South America
Middle East Harris Pye Brasil LTDA
Harris Pye DMCC Rua Academico Paulo Sérgio
PO Box 127969 Carvalho de Vasconcelos,
12th Floor Mazaya BB-1 n.º 780, Novo Cavaleiros
Jumeirah Lakes Towers Macae – RJ – Brasil
Dubai, United Arab Emirates Postal code / CEP: 27930-260
Tel: +971 4324 1535 Tel: +55 22 2765 9950
Fax: +971 4324 3585 Fax: +55 22 2765 9967
Email: hpoffshore@harripye.com Email: harrispyebrazil@harrispye.com

Harris Pye Gulf Australia

PO Box 68826 Harris Pye Austraia Pty Ltd.
Emirates Industrial City Sajjah, Harris Pye Australia Pty Ltd.
Sharjah, United Arab Emirates 10/11-13 Brookhollow Avenue
Tel: +971 6507 3500 Baulkham Hills
Fax: +971 6507 3599 NSW 2153 Australia
Email: uaeoffice@harripye.com Tel: +61 2 9894 2655
Fax: +61 2 9634 8811
Email: enquiries.australia@harrispye.com
Asia
Harris Pye Singapore PTE Ltd.
48 Tuas Road
Singapore 638500
Tel: +65 6863 3188
Fax: +65 6863 3166
Email: enquiries.singapore@harrispye.com