Minato

 A scale is an instrument with a system of ordered marks at fixed intervals used as a

Select one:
True 
False

Question 2
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A divider is especially useful for large circles, but using one can be time consuming.

Select one:
True
False 

Question 3
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A manual drafting machine is a machine that mounts to the table or board and has scales
attached to an adjustable head that rotates for drawing angles.
Select one:
True 
False

Question 4
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Dividers
Answer are used to transfer dimensions or to divide a distance into a number
of equal parts.

Question 5
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It refers to the material on which you create drawings, such as paper or polyester film.

Select one:
a.
Film

b.
Drawing

c.
Media
 d.
Radio
Feedback
Your answer is correct.

Question 6
Correct
Mark 1.00 out of 1.00

Flag question

Question text
These are also available for specific requirements and drafting disciplines.

Select one:
a.
Templates

b.
Compass

c.
Divider

d.
T-Square
Feedback
Your answer is correct.

Question 7
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A _______ has a traversing arm that moves left and right across the table and a head unit that
moves up and down the traversing arm.

Select one:
a.
head machine

b.
track drafting machine

c.
arm machine

d.
auto machine
Feedback
Your answer is correct.

Question 8
Correct
Mark 1.00 out of 1.00

Flag question

Question text
French curve
Irregular curves, commonly called Answer , are curves that have no constant radii.

Question 9
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The _________ clamps to a table and through an elbow like arrangement of supports allows
you to position the protractor head and scales anywhere on the board.

Select one:
a.
arm machine

b.
tail machine

c.
head machine

d.
auto machine
Feedback
Your answer is correct.

Question 10
Correct
Mark 1.00 out of 1.00

Flag question

Question text
_________are used to reduce or enlarge an object without having to make mathematical
calculations or scale manipulations.

Select one:
a.
Automatic Pencil
b.
Compass
c.
DIvider
d.
Proportional dividers
 Feedback
Your answer is correct.

Question 11
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The term automatic pencil refers to a pencil with a lead chamber that advances the lead
from the chamber to the writing tip by the push of a button or tab when a new piece of lead
is needed.

Select one:
True 
False

Question 12
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The parallel bar slides up and down a drafting board to allow you to draw vertical lines.

Select one:
True
False 

Question 13
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
Erasability is important because errors need to be corrected, and changes are frequently
made.

Select one:
True 
False

Question 14
Correct
Mark 1.00 out of 1.00

Flag question

Question text
compass
A Answer  is an instrument used to draw circles and arcs.

Question 15
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Construction lines for layout and guidelines are very lightly drawn with a __________ lead.

Select one:
a.
7H or 3H

b.
2H or 4H

c.
5H or 4H

d.
6H or 4H
Feedback
Your answer is correct.

Question 16
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Compass is also used in navigation to measure distance in nautical miles.

Select one:
True
False 

Question 17
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It can also be used as straightedges to connect points for drawing lines without the aid of a
parallel bar or machine scale.
Select one:
a.
Divider

b.
Triangles

c.
Compass

d.
T-Square
Feedback
Your answer is correct.

Question 18
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The mechanical engineer’s scale is commonly used for mechanical drafting when drawings
are in fractional or decimal inches.

Select one:
True 
False

Question 19
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
Templates for drawing other shapes, such as ellipses, and for letters are also common.

Select one:
True 
False

Question 20
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Durability is a consideration if the original drawing will be extensively used.

Select one:
True 
False

70s
2D software have been first developed way back in Answer . 

Question 2
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 1980
3D CAD tools were introduced in Answer  by a partnership between IBM-Dassults.

Question 3
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a film on which drawings or other printed materials are photographed at greatly
reduced size for ease of storage.

Select one:
a.
Microfilm

b.
Vellum

c.
Diazo

d.
Zoning
Feedback
Your answer is correct.

Question 4
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 Transparen
Answer  is one of the most important characteristics of drawing media when
reproducing the drawing using the diazo print process.

Question 5
Incorrect
Mark 0.00 out of 1.00

Flag question

Question text
A software that was introduced in the late 1960's to expedite engineering drawing process.
CAD or Computer-aided design
Answer: 

Question 6
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Diazo printing
Answer uses a process that involves an ultraviolet light passing through a
translucent original drawing to expose a chemically coated paper or print material
underneath.

Question 7
Correct
Mark 1.00 out of 1.00

Flag question
 Question text
Transparency is the method requires that light pass through the material.

Select one:
True 
False

Question 8
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a film on which drawings or other printed materials are photographed at greatly
reduced size for ease of storage.

Select one:
a.
Zoning

b.
Vellum

c.
Diazo

d.
Microfilm
Feedback
Your answer is correct.

Question 9
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
The term generation refers to the number of times a copy of an original drawing is
reproduced and used to make other copies.

Select one:
True 
False

Question 10
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The diazo reproduction process has been mostly replaced by photocopy reproduction and
the use of CADD fi les for printing and plotting.

Select one:
True 
False

Question 11
Correct
Mark 1.00 out of 1.00

Flag question
 Question text
 These images are called 3D models as they can be viewed and rotated in any direction – X,
Y or Z.

Select one:
True 
False

Question 12
Correct
Mark 1.00 out of 1.00

Flag question

Question text
AutoDesk
Answer  is one of the pioneering companies that has played a significant role
in developing CAD software.

Question 13
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Diazo is drafting paper with translucent properties that is specially designed to accept pencil
or ink.

Select one:
True
 False 

Question 14
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 This type of CAD software allows only a single user to work on a single file at a time. 

Single-file-mode systems
Answer: 

Question 15
Correct
Mark 1.00 out of 1.00

Flag question

Question text
CAD is stands for Computer-Aided Drawing.

Select one:
True
False 

Question 16
Correct
Mark 1.00 out of 1.00

Flag question
 Question text
3D models
These images are called Answer as they can be viewed and rotated in any
direction – X, Y or Z.

Question 17
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a machine for photographically reproducing material.

Select one:
a.
Laser Printing

b.
Platform Printing

c.
Photocopy printer

d.
Diazo Printing
Feedback
Your answer is correct.

Question 18
Correct
Mark 1.00 out of 1.00

Flag question
 Question text
Referenced-file-mode systems it enables users to levergae other users' work as background
data.

Select one:
True 
False

Question 19
Correct
Mark 1.00 out of 1.00

Flag question

Question text
3D was have been first developed way back in 1970’s. 

Select one:
True
False 

Question 20
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is technology for design and technical documentation, which replaces manual drafting
with an automated process.

CADD
Answer: 
If the auxiliary view lies uniformly on both sides of the reference line, then it is called
_____________.

Select one:
a.
Symmetrical Auxiliary Views

b.
Primary Auxiliary Views

c.
Unilateral Auxiliary Views

d.
Bilateral Auxiliary Views
Feedback
Your answer is correct.

Question 2
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is technology for design and technical documentation, which replaces manual drafting
with an automated process.

CADD
Answer: 

Question 3
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
1980
3D CAD tools were introduced in Answer  by a partnership between IBM-Dassults.

Question 4
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a film on which drawings or other printed materials are photographed at greatly
reduced size for ease of storage.

Select one:
a.
Vellum

b.
Zoning

c.
Diazo

d.
Microfilm
Feedback
Your answer is correct.

Question 5
Incorrect
Mark 0.00 out of 1.00
 Flag question

Question text
A software that was introduced in the late 1960's to expedite engineering drawing process.
CAD
Answer: 

Question 6
Correct
Mark 1.00 out of 1.00

Flag question

Question text
If it lies on one side only of the reference line, then it is called ____________________.

Select one:
a.
Symmetrical Auxiliary Views

b.
Bilateral Auxiliary Views

c.
Unilateral Auxiliary Views

d.
Primary Auxiliary Views
Feedback
Your answer is correct.

Question 7
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
The term automatic pencil refers to a pencil with a lead chamber that advances the lead
from the chamber to the writing tip by the push of a button or tab when a new piece of lead
is needed.

Select one:
True 
False

Question 8
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Templates for drawing other shapes, such as ellipses, and for letters are also common.

Select one:
True 
False

Question 9
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 Transparen
Answer  is one of the most important characteristics of drawing media when
reproducing the drawing using the diazo print process.

Question 10
Correct
Mark 1.00 out of 1.00

Flag question

Question text
COMPASS
A Answer  is an instrument used to draw circles and arcs.

Question 11
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Erasability is important because errors need to be corrected, and changes are frequently
made.

Select one:
True 
False

Question 12
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
These are also available for specific requirements and drafting disciplines.

Select one:
a.
Compass

b.
T-Square

c.
Divider

d.
Templates
Feedback
Your answer is correct.

Question 13
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It can also be used as straightedges to connect points for drawing lines without the aid of a
parallel bar or machine scale.

Select one:
a.
Compass
 b.
Divider

c.
T-Square

d.
Triangles
Feedback
Your answer is correct.

Question 14
Correct
Mark 1.00 out of 1.00

Flag question

Question text
_________are used to reduce or enlarge an object without having to make mathematical
calculations or scale manipulations.

Select one:
a.
Proportional dividers
b.
Automatic Pencil
c.
Compass
d.
DIvider
Feedback
Your answer is correct.

Question 15
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
If the auxiliary view does not uniformly lie on both sides of the reference line, then it is
called ______________________.

Select one:
a.
Primary Auxiliary Views

b.
Symmetrical Auxiliary Views

c.
Bilateral Auxiliary Views

d.
Auxiliary Views
Feedback
Your answer is correct.

Question 16
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Durability is a consideration if the original drawing will be extensively used.

Select one:
True 
False

Question 17
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
It refers to the material on which you create drawings, such as paper or polyester film.

Select one:
a.
Radio

b.
Drawing

c.
Film

d.
Media
Feedback
Your answer is correct.

Question 18
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The mechanical engineer’s scale is commonly used for mechanical drafting when drawings
are in fractional or decimal inches.

Select one:
True 
False

Question 19
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A _______ has a traversing arm that moves left and right across the table and a head unit that
moves up and down the traversing arm.

Select one:
a.
head machine

b.
track drafting machine

c.
auto machine

d.
arm machine
Feedback
Your answer is correct.

Question 20
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 This type of CAD software allows only a single user to work on a single file at a time. 

Single-file-mode systems
Answer: 
Question 21
Correct
Mark 1.00 out of 1.00

Flag question

Question text
CAD is stands for Computer-Aided Drawing.

Select one:
True
False 

Question 22
Correct
Mark 1.00 out of 1.00

Flag question

Question text
 A scale is an instrument with a system of ordered marks at fixed intervals used as a
reference standard in measurement.

Select one:
True 
False

Question 23
Not answered
Marked out of 1.00
 Flag question

Question text
3D models as they can be viewed and rotated in any direction Answer .

Question 24
Correct
Mark 1.00 out of 1.00

Flag question

Question text
If the inclined surface is seen in the frontal plane, then such an auxiliary view will be
Frontal Auxiliary View
called Answer .

Question 25
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Dividers
Answer are used to transfer dimensions or to divide a distance into a number
of equal parts.

Question 26
Not answered
Marked out of 1.00
 Flag question

Question text
If the inclined surface is seen in the top plane, then such an auxiliary view will be
called Answer .

Question 27
Correct
Mark 1.00 out of 1.00

Flag question

Question text
3D MODELS
These images are called Answer as they can be viewed and rotated in any
direction – X, Y or Z.

Question 28
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It refers to the material on which you create drawings, such as paper or polyester film.

Select one:
a.
Radio

b.
Drawing
 c.
Film

d.
Media
Feedback
Your answer is correct.

Question 29
Correct
Mark 1.00 out of 1.00

Flag question

Question text
If the auxiliary view does not lie uniformly on both sides of the reference line, then it is
called Unsymmetrical Auxiliary Views.

Select one:
True 
False

Question 30
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Compass is also used in navigation to measure distance in nautical miles.

Select one:
True
False 
Question 31
Correct
Mark 1.00 out of 1.00

Flag question

Question text
  If the inclined surface is seen in the profile plane, then such an auxiliary new will be
Profile auxiliary v
called Answer .

Question 32
Correct
Mark 1.00 out of 1.00

Flag question

Question text
COMPASS
A Answer  is an instrument used to draw circles and arcs.

Question 33
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a film on which drawings or other printed materials are photographed at greatly
reduced size for ease of storage.
Select one:
a.
Microfilm

b.
Zoning

c.
Diazo

d.
Vellum
Feedback
Your answer is correct.

Question 34
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Diazo is drafting paper with translucent properties that is specially designed to accept pencil
or ink.

Select one:
True
False 

Question 35
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A manual drafting machine is a machine that mounts to the table or board and has scales
attached to an adjustable head that rotates for drawing angles.

Select one:
True 
False

Question 36
Incorrect
Mark 0.00 out of 1.00

Flag question

Question text
1970
2D software have been first developed way back in Answer . 

Question 37
Correct
Mark 1.00 out of 1.00

Flag question

Question text
This plane is perpendicular to some principal plane, then the drawing on such drawing is
called ________.

Select one:
a.
Unilateral Auxiliary Views

b.
Symmetrical Auxiliary Views

c.
Primary Auxiliary Views

d.
Bilateral Auxiliary Views
Feedback
Your answer is correct.

Question 38
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It is a machine for photographically reproducing material.

Select one:
a.
Laser Printing

b.
Photocopy printer

c.
Diazo Printing

d.
Platform Printing
Feedback
Your answer is correct.

Question 39
Correct
Mark 1.00 out of 1.00

Flag question
 Question text
Diazo printing
Answer uses a process that involves an ultraviolet light passing through a
translucent original drawing to expose a chemically coated paper or print material
underneath.

Question 40
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The term generation refers to the number of times a copy of an original drawing is
reproduced and used to make other copies.

Select one:
True 
False

Question 41
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Triangles
Answer  can also be used as straightedges to connect points for drawing lines
without the aid of a parallel bar or machine scale.

Question 42
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Construction lines for layout and guidelines are very lightly drawn with a __________ lead.

Select one:
a.
2H or 4H

b.
6H or 4H

c.
7H or 3H

d.
5H or 4H
Feedback
Your answer is correct.

Question 43
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The parallel bar slides up and down a drafting board to allow you to draw vertical lines.

Select one:
True
False 
Question 44
Correct
Mark 1.00 out of 1.00

Flag question

Question text
A divider is especially useful for large circles, but using one can be time consuming.

Select one:
True
False 

Question 45
Correct
Mark 1.00 out of 1.00

Flag question

Question text
The _________ clamps to a table and through an elbow like arrangement of supports allows
you to position the protractor head and scales anywhere on the board.

Select one:
a.
tail machine

b.
head machine

c.
arm machine

d.
auto machine
Feedback
Your answer is correct.

Question 46
Correct
Mark 1.00 out of 1.00

Flag question

Question text
It refers to the material on which you create drawings, such as paper or polyester film.

Select one:
a.
Drawing

b.
Radio

c.
Media

d.
Film
Feedback
Your answer is correct.

Question 47
Correct
Mark 1.00 out of 1.00

Flag question

Question text
Referenced-file-mode systems it enables users to levergae other users' work as background
data.
Select one:
True 
False

Question 48
Correct
Mark 1.00 out of 1.00

Flag question

Question text
AutoDesk
Answer  is one of the pioneering companies that has played a significant role
in developing CAD software.

Question 49
Correct
Mark 1.00 out of 1.00

Flag question

Question text
French curve
Irregular curves, commonly called Answer , are curves that have no constant radii.

Question 50
Correct
Mark 1.00 out of 1.00
 Flag question

Question text
 These images are called 3D models as they can be viewed and rotated in any direction – X,
Y or Z.

Select one:
True 
False