SCP 9012 T48515 Spec
SCP 9012 T48515 Spec
SCP 9012 T48515 Spec
q Small size
q Low intermodulation
q Rugged design
Frequency range: 800 - 900 / 1850 - 1990 MHz Overall height: 43 in [1092 mm]
Impedance: 50 ohm Width: 8.5 in [216 mm]
Connector type: 7/16 Din Depth: 8 in [203 mm]
Return loss: 20 dB Weight (excluding brackets): 15 lbs [6.8 Kg]
Polarization: 2x Vertical Wind load measured up to: 150 mph [240 Km/h]
Isolation between antennas: 30 dB Wind area (side of antenna): 2.54 sq. ft. [0.24 sq.m]
Lateral thrust At 113 mph/
800 - 900 MHz 1850 - 1990 MHz 180Km/h (worst case): 130 lbs [577 N]
Gain: 12 dBd 15 dBd
Front-to-back ratio: > 30 dB > 30 dB
Power rating: 500 W 300 W
H-plane (-3 dB point): 83 - 84° 82 - 86°
V-plane (-3 dB point): 17 - 19° 8 - 9° Radiating Elements: Silver plated brass/Aluminum
Electrical tilt: 4° 0° Transformer (Power distribution) Ceramic PCB
Chassis: Aluminum
Intermodulation (2x20W): IM5 160 dB Radome: Grey Fiberglass/PVC
IM7/9 170 dB Mounting bolts: Stainless steel
Lightning protection: DC grounded The SCP 9012 T4/ 8515 is made in the U.S.A.