SeaChest Info

SeaChest_Info Revision: 17-Jun-2021
===============================================================================
SeaChest_Info - Seagate drive utilities
Copyright (c) 2014-2021 Seagate Technology LLC and/or its Affiliates, All Rights
Reserved
See Version History below.
===============================================================================
Welcome to Seagate's SeaChest_Info diagnostic software.
Disk drives are constantly monitoring and analyzing their own performance,
integrity and environment. The current state of this technology is the result
of more than 20 years of innovative Seagate engineering focused on self-testing.
With the backing of personal computer manufacturers, the disk drive industry
adopted an analysis system in the 1990's called Self Monitoring Analysis and
Reporting Technology, or SMART. The idea then and today is to predict a failure
before it happens. Various attributes are being monitored and measured against
certain threshold limits. If any one attribute exceeds a threshold then a
general SATA SMART Status test will change from Pass to Fail.
Many computers automatically check SATA SMART Status when they start up which is
when most people become aware of the issue. If still under warranty, then SMART
Status FAIL is a valid condition for warranty replacement.
You can use SeaChest_Basics or SeaChest_SMART software with --smartCheck to

test the SATA SMART status of the drive.
When a SMART Status test has a FAIL it is extremely important that you back up
all of your important data. SMART Status FAIL is a near-term prediction of
drive failure and the drive usually functions like normal. Unfortunately, there
is no way to specifically predict when the failure will occur, so your best
response is to back up your data as soon as possible.
SMART attributes are also supplemented by SATA Device Statistics Notification

(DSN) feature set, including a set of Device Statistics Notifications log
pages. This data provides further insight into a drive's performance and can
be used to help measure its usage and potentially identify problem areas of
concern.
Likewise, SAS SCSI and FibreChannel interface products collect ongoing

performance data and save this information in many different "vital data" and
"log" pages, also call Vital Product Data (VPD). This data is similar and
overlaps most of the same data collection categories as the SATA interface.
SeaChest does not interpret attributes or thresholds. As a practical matter,

the technology supporting SMART is constantly being improved. Each new design
incorporates improvements that increase the accuracy of the SMART prediction.
As a matter of policy, Seagate does not publish attributes and thresholds.
Seagate Support does not help to analyze SMART attributes.
This User Guide file contains important information about SeaChest_Info.

Please read this entire file before using this software.
SeaChest is a comprehensive, easy-to-use command line diagnostic tool that

helps you quickly determine the health and status of your Seagate storage
product. It includes several tests that will examine the physical media on your
Seagate, Samsung or Maxtor disk drive.
Tests and commands which are completely data safe will run on any disk drive.
Tests and commands which change the drive (like firmware download or data
erasure or setting the maximum capacity, etc) are limited to Seagate disk
drives (this includes Seagate, Maxtor, Samsung and LaCie). Be careful using
SeaChest because some of the features, like the data erasure options, will
cause data loss. Seagate is not responsible for lost user data.
Note: One gigabyte, or GB, equals one billion bytes when referring to hard
drive capacity. This software may use information provided by the operating
system to display capacity and volume size. The Windows file system uses a
binary calculation for gibibyte or GiB (2^30) which causes the abbreviated size
to appear smaller. The total number of bytes on a disk drive divided by the
decimal calculation for gigabyte or GB (10^9) shows the expected abbreviated
size. See this FAQ for more information
<http://knowledge.seagate.com/articles/en_US/FAQ/172191en?language=en_US>.
Usage - Linux (run with sudo)

=============================
SeaChest_Info [-d <sg_device>] {arguments} {options}
Examples - Linux
================
sudo SeaChest_Info --scan
sudo SeaChest_Info -d /dev/sg2 -i
Usage - Windows (run as administrator)

======================================
SeaChest_Info [-d <PD_device>] {arguments} {options}
Examples - Windows
==================
SeaChest_Info --scan
SeaChest_Info -d PD0 -i
===================================================================================
=======
SeaChest_Info - Seagate drive utilities - NVMe Enabled
Reserved
SeaChest_Info Version: 2.1.0-2_2_3 X86_64
Build Date: Jun 17 2021
Today: Thu Jun 17 17:11:33 2021 User: tyler
===================================================================================
=======
Usage
=====
SeaChest_Info [-d <sg_device>] {arguments} {options}
Examples
========
SeaChest_Info --scan
SeaChest_Info -d /dev/sg? -i
Return codes
============
Generic/Common exit codes
0 = No Error Found
1 = Error in command line options
2 = Invalid Device Handle or Missing Device Handle
3 = Operation Failure
4 = Operation not supported
5 = Operation Aborted
6 = File Path Not Found
7 = Cannot Open File
8 = File Already Exists
9 = Need Elevated Privileges
Anything else = unknown error
Utility Options
===============
--echoCommandLine
Echo the command line entered into the utility on the screen.
--enableLegacyUSBPassthrough
Only use this option on old USB or IEEE1394 (Firewire)
products that do not otherwise work with the tool.
This option will enable a trial and error method that
attempts sending various ATA Identify commands through
vendor specific means. Because of this, certain products
that may respond in unintended ways since they may interpret
these commands differently than the bridge chip the command
was designed for.
--forceATA
Using this option will force the current drive to
be treated as a ATA drive. Only ATA commands will
be used to talk to the drive.
--forceATADMA (SATA Only)

Using this option will force the tool to issue SAT
commands to ATA device using the protocol set to DMA
whenever possible (on DMA commands).
This option can be combined with --forceATA
--forceATAPIO (SATA Only)

Using this option will force the tool to issue PIO
commands to ATA device when possible. This option can
be combined with --forceATA
--forceATAUDMA (SATA Only)

Using this option will force the tool to issue SAT
commands to ATA device using the protocol set to UDMA
whenever possible (on DMA commands).
This option can be combined with --forceATA
--forceSCSI
Using this option will force the current drive to
be treated as a SCSI drive. Only SCSI commands will
be used to talk to the drive.
-h, --help
Show utility options and example usage (this output you see now)
Please report bugs/suggestions to seaboard@seagate.com.
Include the output of --version information in the email.
--license
Display the Seagate End User License Agreement (EULA).
--modelMatch [model Number]
Use this option to run on all drives matching the provided
model number. This option will provide a closest match although
an exact match is preferred. Ex: ST500 will match ST500LM0001
--onlyFW [firmware revision]

Use this option to run on all drives matching the provided
firmware revision. This option will only do an exact match.
--onlySeagate
Use this option to match only Seagate drives for the options
provided
-q, --quiet
Run SeaChest_Info in quiet mode. This is the same as
-v 0 or --verbose 0
-v [0-4], --verbose [0 | 1 | 2 | 3 | 4]
Show verbose information. Verbosity levels are:
0 - quiet
1 - default
2 - command descriptions
3 - command descriptions and values
4 - command descriptions, values, and data buffers
Example: -v 3 or --verbose 3
-V, --version
Show SeaChest_Info version and copyright information & exit
Utility Arguments
=================
-d, --device deviceHandle
Use this option with most commands to specify the device
handle on which to perform an operation. Example: /dev/sg?
-F, --scanFlags [option list]

Use this option to control the output from scan with the
options listed below. Multiple options can be combined.
ata - show only ATA (SATA) devices
usb - show only USB devices
scsi - show only SCSI (SAS) devices
nvme - show only NVMe devices
interfaceATA - show devices on an ATA interface
interfaceUSB - show devices on a USB interface
interfaceSCSI - show devices on a SCSI or SAS interface
interfaceNVME = show devices on an NVMe interface
sd - show sd device handles
sgtosd - show the sd and sg device handle mapping
-i, --deviceInfo
Show information and features for the storage device
-s, --scan
Scan the system and list all storage devices with logical
/dev/sg? assignments. Shows model, serial and firmware
numbers. If your device is not listed on a scan immediately
after booting, then wait 10 seconds and run it again.
-S, --Scan
This option is the same as --scan or -s,
however it will also perform a low level rescan to pick up
other devices. This low level rescan may wake devices from low
power states and may cause the OS to re-enumerate them.
Use this option when a device is plugged in and not discovered in
a normal scan.
NOTE: A low-level rescan may not be available on all interfaces or
all OSs. The low-level rescan is not guaranteed to find additional
devices in the system when the device is unable to come to a ready
state.
--SATInfo
Displays SATA device information on any interface
using both SCSI Inquiry / VPD / Log reported data
(translated according to SAT) and the ATA Identify / Log
reported data.
--testUnitReady
Issues a SCSI Test Unit Ready command and displays the
status. If the drive is not ready, the sense key, asc,
ascq, and fru will be displayed and a human readable
translation from the SPC spec will be displayed if one
is available.
--deviceStatistics
Use this option to display the device statistics reported
by the device. On SATA, this uses the Device Statistics
log, and the notifications log (if DSN feature is supported)
to display these statistics. On SAS, various log pages are
read to collect a bunch of reported parameter information.
--showConcurrentRanges
Use this option to display the concurrent positioning ranges
supported by a device. Concurrent positioning ranges are used
to inform which actuator is used for a given range in LBA space.
SATA Only:
=========
--smartAttributes [raw | analyzed] (SATA Only)
The drive will display its list of supported SMART attributes.
Some attributes names are commonly standard and most others are
vendor unique. In either case, the attribute thresholds are
always vendor unique. Most attributes are informational and not
used to determine a warranty return. Use the --smartCheck
command to determine if one of the warranty attributes has been
tripped. Seagate Support does not help to analyze SMART
attributes.
SAS Only:
=========
--defectFormat [ # | shortBlock | longBlock | xbfi | xchs | bfi | chs ]
(SAS Only)
This option set the format of the defects to output.
Not all drives will support all defect modes!
SSDs will only support block modes!
Arguments: (name | #)
shortBlock | 0 - show the defects in short block address mode (drives
< 32bit LBA)
xbfi | 1 - show the defects in extended bytes from index mode
xchs | 2 - show the defects in extended physical cylinder-head-
sector mode
longBlock | 3 - show the defects in long block address mode (drives >
32bit LBA)
bfi | 4 - show the defects in bytes from index mode
chs | 5 - show the defects in physical cylinder-head-sector
mode
--showSCSIDefects [ p | g | pg ] (SAS Only)

This option will display the SCSI defects on the screen.
The arguments to this will tell whether to get the grown,
primary, or primary and grown defects from the drive.
Use the --defectFormat option to specify the mode to display the
defects.
If no mode is specified, physical cylinder-head-sector mode is assumed
Arguments:
p - use this option to pull and display the primary (factory) defects
g - use this option to pull and display the grown (reallocated)
defects
The above options can be combined to pull and display both defect
lists.
================
Tool Usage Hints
================
See Sample Output examples below.
First, run the SeaChest -s option to determine what /dev/sg? or PD? device
handle assignment lines up to your disk drive. This option will also show you
other details about the drive including the current firmware revision.
Linux:
Vendor Handle Model Number Serial Number FwRev
ATA /dev/sg0 ST94813AS 3AA043KP 3.03
SEAGATE /dev/sg1 ST1000NM0011 ZAA15VAS SN03
Windows:
Vendor Handle Model Number Serial Number FwRev
IDE PD0 ST94813AS 3AA043KP 3.03
SEAGATE PD1 ST1000NM0011 ZAA15VAS SN03
You can use SeaChest -s --onlySeagate to limit the display to just Seagate.
All utility arguments will require you to identify the specific drive by
providing the sg or PD device handle (-d, --device).
Lin example, SeaChest_Basics -d /dev/sg1 --shortDST --poll

Win example, SeaChest_Basics -d PD2 --shortDST --poll
You may combine multiple tests with a single command line. For example,
in Linux, SeaChest_Basics -d /dev/sg0 -i --smartCheck runs both identify and
SMART. In Windows, SeaChest_Basics -d PD0 -i --smartCheck runs both
identify and SMART.
Multiple device handles can be given by adding -d /dev/sg# for each additional
handle. Devices are processed in sequential order. For example, in Linux,
SeaChest_Basics -d /dev/sg0 -d /dev/sg3 -i runs identify on these two
devices. In Windows, SeaChest_Basics -d PD0 -d PD3 -i runs identify on
these two devices.
Caution: All device handles may be specified. However, great care should be
taken to fully anticipate the consequences of running a command on all storage
devices in a system. For example, a command to erase data on all drives could
be catastrophic or exactly what you want. The shortcut to select all devices is
-d all. Seagate is not responsible for lost user data. Along with the
designation for all devices, you can narrow the tasks to specific types of
drives by using the --onlySeagate, --modelMatch and --onlyFW filters.
If the task is an OFFLINE command like format unit or short DST, meaning that
the drive works on the task in the background and the tool quickly returns to
the command prompt (there is little or no I/O to the system), then you can
expect the system to run normally. If the task has high I/O to the system like
a sequential read of all sectors on the drive, then you can expect the system
to slow down with each additional device.
The discussion above is about starting SEQUENTIAL tests, or one after the
other. When the task does not return to the command prompt for a very long
time, then you have a few options to run tests in PARALLEL, also called
simultaneous, in other words all at the same time. One way is to start
different drives in different Terminal windows, if available. There are other
more sophisticated methods using parallel processing, for information about
these methods please see the information at this link:
https://github.com/Seagate/ToolBin/tree/master/SeaChest/parallel_testing
Tests which take a very long time to complete or erase all user data on the
drive will require a longer command line argument than indicated in the --help
output to the screen. This approach is taken to eliminate the possibility of
accidental data loss or the commitment of long test times. The longer command
arguments are similar to -I-understand-this-command-will-take-a-long-time or
-I-understand-this-command-will-erase-all-data.
Tests which alter the firmware or erase user data on the drive are limited to
Seagate-only products which include Seagate, Maxtor, Samsung and LaCie.
Advanced SAS installations may use dual ports. These are listed as Port 0 and
Port 1 on the device information report. When both ports are active, each one
may have a unique /dev/sg designation. The scan option may indicate that there
are two drives in the system with the same serial number. Dual port
installations will also report two different Worldwide Numbers (WWN).
Windows Only Usage

==================
All Windows version tools support finding CSMI devices and talking to them like
you would a normal device. The scan output will show all drives it detects
ONCE. CSMI device handles have a structure like csmi:<controller>:<port>:<lun>.
If a drive has both a PD? and csmi:?:?:? handle, then SeaChest will show the PD
handle instead of the CSMI handle.
When drives are in a RAID, the PD device handle is usually not available and
the CSMI handle may provide an alternate way to talk to the drive. Just
because a device has a CSMI handle doesn't mean it is part of a RAID.
If you want to see both handles, add --scanFlags allowDuplicates to the command
line. If you don't want to see any CSMI devices, add --scanFlags ignoreCSMI to
the command line. SeaChest_Info -d csmi:?:?:? --csmiInfo is useful when
troubleshooting CSMI device handles questions.
=========================
Linux General Usage Hints
=========================
Remember that Linux file names and command line arguments are cAsE SeNsiTiVe.
Display a file listing with the Linux command: ls -lah
The tool will require root privileges to run using either sudo or su commands.
Also, verify that the tool has executable rights.
A dot slash is a dot followed immediately by a forward slash (./). It is used

in Linux to execute a compiled program in the current directory when it is not
a built-in command or found in your path.
For example, ./SeaChest -d /dev/sg0 --shortDST --poll

or, sudo ./SeaChest -d /dev/sg0 --shortDST --poll
Shut down the files system and remove the power with the command:
poweroff
See previous screen history with the key combination:

Shift+PgUp or Shift+PgDn
Save a log file by redirecting the screen output to a text file by adding space
&>test.log at the end of your command line. Choose your own file name. To
append the screen output to an existing log file use >>test.log.
To save a log and display results at the conclusion of the tests, you can use
the "tee" command. Tee command writes to the STDOUT and to a file.
For example,
SeaChest --echoCommandLine -d /dev/sg0 -i --smartCheck | tee -a mySeaChestLog.txt
Display a log or text file with the Linux "less" command: less myfile.log
Press the letter q to quit displaying the file. Similarly, you can easily
read the Seagate License agreement by piping the output to the less
command with SeaChest --license |less
Display a list of sg (SCSI generic) devices with the command:

cat /sys/class/scsi_generic/sg*/device/model
or
ls /dev/sg*
sg devices include the following interfaces: SATA, USB, SCSI (SCSI, SAS and FC)
Add the command word 'time' on the same command line before the SeaChest
command to see how much time it takes to run a test.
For example, time ./SeaChest -d /dev/sg0 --shortDST --poll
When drives are not detected by SeaChest

--------------------------------------------
The problem is that the sg driver isn't loaded on the system on boot. You can
test if it is loaded by doing "ls /dev/sg*" and see if anything shows up. If
nothing shows up then the SG driver is missing (which is required by
SeaChest to issue commands).
You need to do "modprobe sg" as root to load the sg module (since it wasn't
compiled into the kernel), then you will get sg devices that we can scan and
find. Once you run the modprobe command and sg is successfully loaded, then you
can re-run "ls /dev/sg*" and see SG device nodes. SeaChest tools should
then be able to find devices once again.
How to control the amount of runtime kernel messages

----------------------------------------------------
When testing more drives than a system can hold, careful use of host adapters
and hot-plugging batches of drives (but never to direct motherboard
connections!) can help speed the process. The Linux operating system will
display various system error messages, or none, when storage devices are
powered down and exchanged with the next drives. The amount of information
contained in the OS error messages can be reviewed using the Linux utility
command "sysctl kernel.printk". The default setting is defined by the
particular distro. Tiny Core Linux, for example may set "4 4 1 7". To hide
hot-plugging messages try "3 4 1 7", to increase the messaging to include
device details like model numbers try "6 4 1 7". The command to set is 'sudo
sysctl -w kernel.printk="6 4 1 7"'. See man sysctl - "configure kernel
parameters at runtime" for more.
Tesing storage devices on the USB and Thunderbolt interfaces

------------------------------------------------------------
Sometimes, when testing a storage device, it is more convenient to attach it as
an external drive to the test system. In the case of SATA drives there are very
many SATA-to-USB 'bridge' adapters available. The quality and range of command
'passthrough' support for these adapters varies greatly. Our tools will
attempt to work through these adapters.
If your notebook has a Thunderbolt interface connection then you may be able to
test a wide range of devices. External Thunderbolt expansion systems provide a
PCIe slot in a chassis that can hold a SAS, NVMe, or SATA host adapter. The
host adapters would have cables that go out to your test bench where you would
provide the drive and an external power supply for the drives. Thunderbolt 2
expansion systems work in Linux by default. Thunderbolt 3 expansion systems
need to be enabled in the kernel with boot time options before it will be
recognized by the Linux operating system. See
https://www.kernel.org/doc/html/v4.14/admin-guide/thunderbolt.html for
information about how to activate the interface.
===========================
Windows General Usage Hints
===========================
The tool will require Administrative privileges to run.
Also, verify that the tool has executable rights.
Remember that the command line arguments are cAsE SeNsiTiVe.
Save a log file by redirecting the screen output to a text file by adding space
&>test.log at the end of your command line. Choose your own file name. To
append the screen output to an existing log file use >>test.log.
To save a log and display results at the conclusion of the tests, you can use
the powershell "tee" command. Tee command writes to the STDOUT and to a file.
For example:
powershell ".\SeaChest --echoCommandLine -d PD1 --smartCheck | tee -append
mySeaChestLog.txt"
Setup for Windows

-----------------
The SeaChest Utilities Setup places all of the files at "C:\Program
Files\Seagate\SeaChest" and adds an icon on the Desktop. Clicking the icon
will open a Windows command prompt in Administrator mode at this location.
From there you will need to type the full command line for the tool and device
and options to run the test you require. See the various SeaChest Help
documentation for descriptions and examples of the various commands.
Manual Launch for Windows

-------------------------
An individual SeaChest utility for Windows cannot be launched by just
clicking on the file name. If started that way, the SeaChest utility will
briefly show a black window box and quickly close. That is what happens when
trying to run it from the Windows File Manager.
This is a command line tool and the requirement is to open a Command Prompt as
Administrator. There are two easy ways to do this:
1. Windows Accessories, right-click the Command Prompt icon and select Run as
Administrator.
2. Click Windows Start. In the Start Search box, type cmd, and then press
CTRL+SHIFT+ENTER.
Then change drives or directory to where the SeaChest utility is located and
run the tool file name from there.
=============
Sample Output
=============
SATA HDD Device Information:
Lin: sudo ./SeaChest_Basics -i -d /dev/sg1

Win: SeaChest_Basics -i -d PD1
===============================================================================
SeaChest - Seagate drive utilities
Reserved
===============================================================================
Model Number: ST4000DX001-1CE168
Serial Number: ZQ3034X7R
Firmware Revision: CC44
World Wide Name: 500Q0C5007A5FCF19
Drive Capacity (TB/TiB): 4.00/3.64
Native Drive Capacity (TB/TiB): 4.00/3.64
Temperature Data:
Current Temperature (C): 25
Highest Temperature (C): 40
Lowest Temperature (C): 18
Humidity Data:
Current Humidity (%): Not Reported
Highest Humidity (%): Not Reported
Lowest Humidity (%): Not Reported
Power On Time: 4 days 1 hour
Power On Hours: 97.00
MaxLBA: 7814037167
Native MaxLBA: 7814037167
Logical Sector Size (B): 512
Physical Sector Size (B): 4096
Sector Alignment: 0
Rotation Rate (RPM): 5900
Form Factor (inch): 3.5
Last DST information:
Time since last DST (hours): 0.00
DST Status/Result: 0x0
DST Test run: 0x1
Interface speed:
Max Speed (Gb/s): 6.0
Negotiated Speed (Gb/s): 6.0
Annualized Workload Rate (TB/yr): 2.51
Total Bytes Read (GB): 6.65
Total Bytes Written (GB): 21.27
Drive Reported Utilization (%): Not Reported
Encryption Support: Not Supported
Cache Size (MiB): 64.00
Read Look-Ahead: Enabled
Write Cache: Enabled
SMART Status: Good
ATA Security Information: Supported, Frozen
Zoned Device Type: Not a Zoned Device
Firmware Download Support: Immediate, Segmented
Specifications Supported:
ACS-2
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.1
SATA 3.0
SATA 2.6
SATA 2.5
SATA II: Extensions
SATA 1.0a
Features Supported:
NCQ
HPA
Power Management
Security
SMART
DCO
48bit Address
APM
GPL
Free-fall Control
Write-Read-Verify
SATA SSD Device Information:

===============================================================================
Reserved
===============================================================================
Model Number: ST120FP0021
Serial Number: PQ57011BD
Firmware Revision: B770
World Wide Name: 5000C501005A16633
Drive Capacity (GB/GiB): 120.03/111.79
Native Drive Capacity (GB/GiB): 120.03/111.79
Temperature Data:
Highest Temperature (C): 0
Lowest Temperature (C): 17
Humidity Data:
Power On Time: 2 days 23 hours
MaxLBA: 234441647
Native MaxLBA: 234441647
Sector Alignment: 0
Rotation Rate (RPM): SSD
Not supported
Interface speed:
Max Speed (Gb/s): 6.0
Total Bytes Read (TB): 2.35
Cache Size (MiB): Not Reported
Percentage Used Endurance Indicator (%): 0.00000
SMART Status: Good
ATA Security Information: Supported, Frozen
Firmware Download Support: Immediate, Segmented
ATA8-ACS
ATA/ATAPI-7
ATA/ATAPI-6
ATA/ATAPI-5
ATA/ATAPI-4
SATA 3.0
Features Supported:
Sanitize
NCQ
HPA
Power Management
Security
SMART
48bit Address
GPL
TRIM
SAS HDD Device Information:

===============================================================================
Reserved
===============================================================================
Model Number: ST4000NM0043
Serial Number: Z1QZ04KVG
Firmware Revision: 0004
World Wide Name: 500Q0C5005594AEFB
Copyright: Copyright (c) 2014 Seagate All rights reserved
Drive Capacity (TB/TiB): 4.00/3.64
Temperature Data:
Highest Temperature (C): Not Reported
Lowest Temperature (C): Not Reported
Humidity Data:
Power On Time: 61 days 11 hours 14 minutes
MaxLBA: 7814037167
Native MaxLBA: Not Reported
Sector Alignment: 0
Rotation Rate (RPM): 7200
DST Test run: 0x1
Interface speed:
Port 0 (Current Port)
Max Speed (GB/s): 6.0
Port 1
Negotiated Speed (Gb/s): Not Reported
Encryption Support: Self Encrypting
SMART Status: Good
ATA Security Information: Not Supported
Firmware Download Support: Immediate
SPC-4
Features Supported:
EPC
TCG
Self Test
Informational Exceptions
Format Unit
Sanitize
SAS SSD: Device Information

===============================================================================
Reserved
===============================================================================
Model Number: ST400FM0053
Serial Number: P3QF13026
Firmware Revision: 0006
World Wide Name: 5000QC50069010B4B
Copyright: Copyright (c) 2014 Seagate All rights reserved -
Drive Capacity (GB/GiB): 400.09/372.61
Temperature Data:
Highest Temperature (C): Not Reported
Lowest Temperature (C): Not Reported
Humidity Data:
Power On Time: 30 days 21 hours 29 minutes
MaxLBA: 781422767
Native MaxLBA: Not Reported
Sector Alignment: 0
Rotation Rate (RPM): SSD
DST Test run: 0x1
Interface speed:
Port 0 (Current Port)
Port 1
Negotiated Speed (Gb/s): Not Reported
Percentage Used Endurance Indicator (%): 1.00000
SMART Status: Good
ATA Security Information: Not Supported
Firmware Download Support: Immediate, Segmented, Deferred
SPC-4
Features Supported:
EPC
Power Comsumption
UNMAP
Self Test
Informational Exceptions
Format Unit
Sanitize
SATA SSD SMART Attributes example.
The drive will display its list of supported SMART attributes. Some attributes
are industry standard and most others are vendor unique. Most attributes are
informational and not used to determine a warranty return. Use the --smartCheck
command to determine if one of the warranty attributes has been tripped.
Reminder: Seagate Support does not help to analyze SMART attributes.
Lin: sudo ./SeaChest_Basics -d /dev/sg1 --smartAttributes

Win: SeaChest_Basics -d PD1 --smartAttributes
===============================================================================
Reserved
===============================================================================
Attribute Name: Status: Nominal: Worst: Raw (hex):
1 Read Error Rate 0x000F 0x75 0x63 0x0000000969AFB4
3 Spin Up Time 0x0003 0x61 0x61 0x00000000000000
4 Start/Stop Count 0x0032 0x63 0x63 0x0000000000079E
5 Retired Sectors Count 0x0033 0x64 0x64 0x00000000000000
7 Seek Error Rate 0x000F 0x52 0x3C 0x0000000A4D0DAA
9 Power On Hours 0x0032 0x5D 0x5D 0x00000000001A84
10 Spin Retry Count 0x0013 0x64 0x64 0x00000000000000
12 Drive Power Cycle Count 0x0032 0x63 0x63 0x000000000007A5
184 IOEDC Count 0x0032 0x55 0x55 0x0000000000000F
187 Reported Un-correctable 0x0032 0x64 0x64 0x00000000000000
188 Command Timeout 0x0032 0x64 0xFD 0x00000000000000
189 High Fly Writes 0x003A 0x64 0x64 0x00000000000000
190 Airflow Temperature 0x0022 0x40 0x2E 0x00000026110024
191 Shock Sensor Counter 0x0032 0x64 0x64 0x00000000000000
192 Emergency Retract Count 0x0032 0x64 0x64 0x00000000000042
193 Load-Unlock Count 0x0032 0x44 0x44 0x0000000000FA61
194 Temperature 0x0022 0x24 0x36 0x00000A00000024
195 ECC On The Fly Count 0x001A 0x2D 0x29 0x0000000969AFB4
197 Pending-Sparing Count 0x0012 0x64 0x64 0x00000000000000
198 Offline Uncorrectable Sectors 0x0010 0x64 0x64 0x00000000000000
199 Ultra DMA CRC Error 0x003E 0xC8 0xC8 0x00000000000000
===============
Version History - SeaChest_Info
===============
SeaChest_Info is branched off from SeaChest Basics v2.0.3.
v0.0.1 02-Jun-2016 Initial SeaChest_Info using 1_9_4 libraries.

v0.0.1 06-Jul-2016 1_10_0 libraries add --forceATA and --forceSCSI.
v0.0.1 14-Jul-2016 1_10_1 libraries adds SMART and power management
functions, format polling, endianess detection, buffer
size fixes, SAS device statistics, Win32 IOCTL
pass-through fix on Win8 and higher.
v0.1.0 01-Sep-2016 1_11_1 libraries updates to various printed message,
minor bug fixes. Fixed --SATInfo command.
v0.1.0 21-Sep-2016 1_11_2 libraries updates adds --forceATADMA, --forceATAPIO
and --forceATAUDMA (SATA Only).
v1.0.0 10-Oct-2016 1_11_4 libraries updates. Support for multiple devices.
v1.0.0 25-Oct-2016 1_11_5 libraries updates improved LaCie detection, adds
SAT Vendor ID, SAT Product ID, and SAT Product Revision to
the -i --SATInfo output.
v1.0.1 27-Oct-2016 1_11_6 libraries updates WWN detection. Added
--enableLegacyUSBPassthrough
v1.0.1 03-Nov-2016 1_11_7 libraries fixed issue with SAS EPC power mode
settings.
v1.0.1 13-Dec-2016 1_11_10 libraries fixes a problem when using maxLBA without
the corresponding command range option, SAS power mode
setting, and Sanitize erase patterns.
v1.1.0 23-Feb-2017 1_13_0 libraries adds support for SAS 12.0Gb/s and
22.5Gb/s physical bus speeds, support for double buffered
passthrough IOCTLs. New -F, --scanFlags [options:
ignoreCSMI allowDuplicates] for Windows tools. Add CSMI
support to all Windows version tools.
v1.1.0 06-Mar-2017 1_13_2 libraries adds Enhanced device information output
for SAS features. Add --csmiInfo.
v1.2.0 14-Jun-2017 1_15_0 libraries adds bug fix malformed command line
should exit with code = 1; added detection of parallel ATA
and SCSI speeds; temperature data on ATA now uses the
values from the SCT status log or device statistics log.
Bug fix where the "-d all" was not filtering out csmi
drives like it is supposed to causing duplicate drives to
show up. Adds the child drive matching options
--childModelMatch, --childOnlyFW, and --childNewFW.
v1.3.0 14-Jul-2017 1_16_1 libraries adds support for ATA drives that have the
Sense Data Reporting feature enabled, changes to how we
interpret the completion status from the drive, new Sense
Data ASC, ASCQ definitions from SPC5. Adds --Scan (or -S,
note the capital S) aggressive system scan.
v1.3.0 27-Jul-2017 1_16_2 libraries enhances Seagate brand detection.
v1.3.0 19-Sep-2017 1_16_4 libraries fixes SCSI "--progress format", added
reading remanufacture time for SAS when the drive reports
a time, fixed SAS --abortDST.
v1.3.0 25-Sep-2017 1_17_0 libraries adds improved SATA device discovery on
SAS adapters, added NVMe read, write & Flush commands.
v1.3.1 10-Oct-2017 1_17_1 libraries adds Better handling of NVMe as a SCSI
device, SAT library strings, and fixes to Read-Buffer
error history (ISL). Updated copyright notice, invalid
command line options now only display an error instead of
long help.
v1.3.1 12-Oct-2017 1_17_3 libraries improves Fast-Format compatibility on SAS.
v1.3.1 26-Oct-2017 1_17_5 libraries fixes SATA drive discovery behind HBAs
that don't show as SATA and don't support the SAT VPD
page; added Automatic fallback to 12byte CDBs during
initial device discovery; integrated fixes for SAS
firmware download and fixes for SAS LongDST time
calculation; added detection of TCG Pyrite and Opalite
drives.
v1.3.1 31-Oct-2017 1_17_6 libraries adds ATA Security compatibility with SATL
on some LSI adapters, corrects firmware download issue
under Windows 10 API.
v1.3.1 02-Nov-2017 1_17_7 libraries fixes Long DST time on SCSI/SAS products.
v1.3.1 19-Apr-2018 1_18_0 libraries improves device detection of CD-ROM and
USB flash drives, support for early 90's PATA drives that
don't support LBA mode, bug fix where the last digit of
the SCSI Unit Serial Number was being dropped, additional
logic for deferred download completion status. --scan
--onlySeagate for just Seagate drives in a large system,
Long Drive Self Test Time in the -i output, write protect
status has been added for SCSI and NVMe in the -i output,
IDD enhancements for SAS, IDD enhancements to allow
captive mode on SATA, added USB Hacks to better support
some odd-ball USB devices and prevent crashes and improve
performance for some operations on them by issuing test
unit ready commands when something fails during device
discovery, automatic fall back to SAT 10 byte commands
during device discovery to help work with some USB
devices, some Legacy SCSI support enhancements (partially
from USB hacks development), enhanced SD to SG mapping in
Linux.
v1.4.0 25-Jul-2018 Adds --defectFormat, --showSCSIDefects
v1.4.1 21-Sep-2018 1_18_2 libraries Added in reading os-release PRETTY_NAME
field to get the OS name under linux; NVMe enabled; fixed
a bug in the ATA activate FW command; added in reading ID
Data log and Device statistics logs page 0 to check the
list of supported pages; fixed a bug in the loop used to
read mode pages for -i information on SAS; IDD SAS
improvements; fixed a bug in DST & Clean with ATA drives
behind SCSI controllers. Fix for --modelMatch that have
spaces in the name. Added additional information to the
banner and -V data to show support levels. Add general
support for NVMe and NVMe specific identify data to "-i"
command.
v1.4.1 18-Oct-2018 1_18_3 libraries Added NVMe generic read command support.
v1.5.0 03-May-2019 1_19_18 libraries added per device verbosity, --deviceInfo
adds SAS (not SATA) FastFormat for Features Supported
section, --deviceInfo now gives Low Current Spinup
status.
v1.5.0 10-Jun-2019 1_19_23 libraries added SNTL (SCSI to NVMe translator),
updated software SAT translator to use dataset management
XL command, fixes for issuing vendor unique commands under
Windows, improved fast format support detection, and
refactored verbose output for NVMe commands.
v1.6.0 19-Feb-2020 1_21_30 libraries add in check for Elevated Privileges
(sudo, run as administrator) before trying to talk to
devices, new exit code 9 if privileges are missing;
printing the USB VID/PID in the device info; fix to sg
helper to support large systems; many changes in support
of dual actuators (example: warning that EPC settings
affect multiple LUNs); overhaul to USB device detection
and support, incorporating a new USB hacks and workarounds
approach which uses a lookup table listing various USB
bridge VIDs/PIDs and their specific issues; separate
Seagate SAS SN and PCBA SN.
v1.6.1 13-Apr-2020 1_21_30 libraries, fix memory allocation during the scan
command.
v2.0.0 20-Nov-2020 Changed how scan-flags are parsed. CSMI rewrite and initial
Intel RST NVMe support added. Numerous code quality
improvements
which fixed many potential bugs and memory leaks. Improved
support for openfabrics NVMe drivers. Changed permissions
detection to show warnings rather than errors. Removed
obsolete
CSMI and SAT 12B CDB options. CSMI handles now show as
csmi:?:?:?
v2.1.0 16-Jun-2021 New option for showing the concurrent positioining ranges of
new
multi-actuator drives.
Pulled in updates to opensea-libs which includes the
following:
Minor USB compatibility improvements and more products added
to the list with their specific workarounds.
Updated NVMe compatibility for FreeBSD 11.
Support for detection and showing of concurrent positioning
(new multi-actuator support from the standards).
=======================================
About SeaChest Command Line Diagnostics
=======================================
Seagate offers both graphical user interface (GUI) and command line interface
(CLI) diagnostic tools for our storage devices. SeaTools for Windows and
SeaTools Bootable for end users are the two most popular GUI tools. These
tools support 15 languages.
SeaChest diagnostics are command line utilities which are available for expert
users. These command line tools assume the user is knowledgeable about running
software from the operating system command prompt. CLI tools are in the
English language only and use "command line arguments" to define the various
tasks and specific devices. SeaChest diagnostics are available for both Linux
and Windows environments.
Linux versions of SeaChest tools are available as stand alone 32 or 64-bit

executables you can copy to your own system. Windows OS versions of SeaChest
diagnostics are installed through a typical setup wizard and can be removed via
the Control Panel.
In addition, Seagate offers a tool to build a bootable USB SeaChest flash drive
which boots to a 64-bit Linux command prompt. This is a Windows executable
file which formats a USB Flash drive you provide. It copies over all the files
needed to use it as a bootable device for the SeaChest diagnostic software.
All data on the USB Flash drive will be erased so be sure to protect any
valuable files.
Technical Support for SeaChest drive utilities is not available. If you have
the time to send us some feedback about this software, especially if you notice
something we should fix or improve, we would greatly appreciate hearing from
you. To report your comments and suggestions, please use this email
seaboard@seagate.com. Please let us know the name and version of the tool you
are using.
SeaChest drive utilities support SATA, SAS and USB interface devices.
SeaChest Basics - Contains the most important tests and tools.
Other SeaChest "break out" utilities are available and listed below which offer
more in-depth functionality in specific areas. These are:
SeaChest Configure - Tools to control various settings on the drives are

brought together into this one tool. Typical commands, for example, include
Write Cache and Read Lookahead Cache enable or disable.
SeaChest Erase - The focus is on data erasure. There are many different
choices for erasing data from simple boot track erase to full cryptographic
erasure (when supported). Be sure to back up important data before using this
tool. Seagate is not responsible for lost user data. This tool only works on
Seagate drives.
SeaChest Firmware - Seagate products are run by firmware. Having the latest
firmware can improve performance and or reliability of your product. Seagate
recommends applying new firmware to enhance the performance and or reliability
of your drive. Most products may see one or two firmware updates within the
early life of the product.
SeaChest Format - Storage products which utilize the SAS, SCSI or Fibre
Channel interfaces are able to perform a full low-level media format in the
field. The SCSI Format Unit command offers many specialty options to
accommodate a variety of conditions and to fine tune the procedure. This
complex command deserves its own "break out" utility.
SeaChest GenericTests - Read Tests are the original disk drive diagnostic which
is to just read every sector on the drive, sequentially. This tool offers
several common read tests which can be defined by either time or range. In
addition, the Long Generic test has the ability to repair problem sectors,
possibly eliminating an unnecessary drive return.
SeaChest Info - Historical generic activity logs (like total bytes written and
power on hours) and performance logs (like temperature) are available for
analytical review. Identification and inquiry data stored on the drive is also
provided. A view of SMART and device statistics is available when supported by
the drive.
SeaChest PowerControl - Seagate disk drives offer a multitude of options to

manage power. This tool manipulates the various power modes.
SeaChest Security - Various settings are available on modern Seagate disk

drives which may be locked and unlocked. These settings may interact with the
operating systems and systems BIOS. Options also include cryptographic erase
for Self-Encrypting Drives (SED).
SeaChest SMART - This tool provides a closer look at the collected SMART
attributes data. SMART stands for Self-Monitoring, Analysis and Reporting
Technology. Short Drive Self Test is included as one of the standard SMART
commands. In addition, the DST & Clean test has the ability to repair problem
sectors, possibly eliminating an unnecessary drive return.
=================================
Support and Open Source Statement
=================================
Seagate offers technical support for disk drive installation. If you have any
questions related to Seagate products and technologies, feel free to submit
your request on our web site. See the web site for a list of world-wide
telephone numbers.
Seagate Support:
http://www.seagate.com/support-home/
Contact Us:
http://www.seagate.com/contacts/
This software uses open source packages obtained with permission from the
relevant parties. For a complete list of open source components, sources and
licenses, please see our Linux USB Boot Maker Utility FAQ for additional
information.
SeaChest Utilities use libraries from the opensea source code projects. These
projects are maintained at http://github.com/seagate.
The libraries in use are opensea-common, opensea-transport and
opensea-operations. These libraries are available under the Mozilla Public
License 2.0, license shown below.
The newest online version of the SeaChest Utilities documentation, open source
usage and acknowledgement licenses can be found at:
http://support.seagate.com/seachest/SeaChest_Combo_UserGuides.html
The USB Boot Maker Utility for Windows utilizes the NSIS Installer
v2.46.5-Unicode (http://nsis.sourceforge.net).
All Linux versions of the SeaChest Utilities are compiled using GCC, the GNU
Compiler Collection, license shown below.
All Windows versions of the SeaChest Utilities uses an open source project
named wingetopt, license shown below.
SeaChest_Firmware uses two open source projects named mbedtls and zlib.h,
licenses shown below.
Reserved
======================================================================
END USER LICENSE AGREEMENT

FOR SEAGATE SOFTWARE
PLEASE READ THIS END USER LICENSE AGREEMENT ("EULA") CAREFULLY. BY CLICKING
"I AGREE" OR TAKING ANY STEP TO DOWNLOAD, SET-UP, INSTALL OR USE ALL OR ANY
PORTION OF THIS PRODUCT (INCLUDING, BUT NOT LIMITED TO, THE SOFTWARE AND
ASSOCIATED FILES (THE "SOFTWARE"), HARDWARE ("HARDWARE"), DISK (S), OR OTHER
MEDIA) (COLLECTIVELY, THE "PRODUCT") YOU AND YOUR COMPANY ACCEPT ALL THE
TERMS AND CONDITIONS OF THIS EULA. IF YOU ACQUIRE THIS PRODUCT FOR YOUR
COMPANY'S USE, YOU REPRESENT THAT YOU ARE AN AUTHORIZED REPRESENTATIVE WHO
HAS THE AUTHORITY TO LEGALLY BIND YOUR COMPANY TO THIS EULA. IF YOU DO NOT
AGREE, DO NOT CLICK "I AGREE" AND DO NOT DOWNLOAD, SET-UP, INSTALL OR USE THE
SOFTWARE.
1. Ownership. This EULA applies to the Software and Products of Seagate

Technology LLC and the affiliates controlled by, under common control with,
or controlling Seagate Technology LLC, including but not limited to
affiliates operating under the LaCie name or brand, (collectively, "Seagate",
"we", "us", "our"). Seagate and its suppliers own all right, title, and
interest in and to the Software, including all intellectual property rights
therein. The Software is licensed, not sold. The structure, organization,
and code of the Software are the valuable trade secrets and confidential
information of Seagate and its suppliers. The Software is protected by
copyright and other intellectual property laws and treaties, including,
without limitation, the copyright laws of the United States and other
countries. The term "Software" does not refer to or include "Third-Party
Software". "Third-Party Software" means certain software licensed by Seagate
from third parties that may be provided with the specific version of Software
that you have licensed. The Third-Party Software is generally not governed
by the terms set forth below but is subject to different terms and conditions
imposed by the licensors of such Third-Party Software. The terms of your use
of the Third-Party Software are subject to and governed by the respective
license terms, except that this Section 1 and Sections 5 and 6 of this
Agreement also govern your use of the Third-Party Software. You may identify
and view the relevant licenses and/or notices for such Third-Party Software
for the Software you have received pursuant to this EULA at
http://www.seagate.com/support/by-topic/downloads/ , or at
http://www.lacie.com/support/ for LaCie branded product. You agree to comply
with the terms and conditions contained in all such Third-Party Software
licenses with respect to the applicable Third-Party Software. Where
applicable, the URLs for sites where you may obtain source code for the Third
Party Software can be found at
http://www.seagate.com/support/by-topic/downloads/, or at
http://www.lacie.com/support/ for LaCie branded product.
2. Product License. Subject to your compliance with the terms of this EULA,
Seagate grants you a personal, non-exclusive, non-transferable, limited
license to install and use one (1) copy of the Software on one (1) device
residing on your premises, internally and only for the purposes described in
the associated documentation. Use of some third party software included on
the media provided with the Product may be subject to terms and conditions of
a separate license agreement; this license agreement may be contained in a
"Read Me" file located on the media that accompanies that Product. The
Software includes components that enable you to link to and use certain
services provided by third parties ("Third Party Services"). Your use of the
Third Party Services is subject to your agreement with the applicable third
party service provider. Except as expressly stated herein, this EULA does
not grant you any intellectual property rights in the Product. Seagate and
its suppliers reserve all rights not expressly granted to you. There are no
implied rights.
2.1 Software. You are also permitted to make a single copy of the
Software strictly for backup and disaster recovery purposes. You may not
alter or modify the Software or create a new installer for the Software. The
Software is licensed and distributed by Seagate for use with its storage
products only, and may not be used with non-Seagate storage product.
3. Restrictions. You are not licensed to do any of the following:

a. Create derivative works based on the Product or any part or
component thereof, including, but not limited to, the
Software;
b. Reproduce the Product, in whole or in part;
c. Except as expressly authorized by Section 11 below, sell,

assign, license, disclose, or otherwise transfer or make
available the Product, in whole or in part, to any third
party;
d. Alter, translate, decompile, or attempt to reverse engineer

the Product or any part or component thereof, except and only
to the extent that such activity is expressly permitted by
applicable law notwithstanding this contractual prohibition;
e. Use the Product to provide services to third parties;
f. Take any actions that would cause the Software to become

subject to any open source license agreement if it is not
already subject to such an agreement; and
g. Remove or alter any proprietary notices or marks on the

Product.
4. Updates. If you receive an update or an upgrade to, or a new version of,

any Software ("Update") you must possess a valid license to the previous
version in order to use the Update. All Updates provided to you shall be
subject to the terms and conditions of this EULA. If you receive an Update,
you may continue to use the previous version(s) of the Software in your
possession, custody or control. Seagate shall have no obligation to support
the previous versions of the Software upon availability of an Update. Seagate
has no obligation to provide support, maintenance, Updates, or modifications
under this EULA.
5. NO WARRANTY. THE PRODUCT AND THE THIRD-PARTY SOFTWARE ARE OFFERED ON AN

"AS-IS" BASIS AND NO WARRANTY, EITHER EXPRESS OR IMPLIED, IS GIVEN. SEAGATE
AND ITS SUPPLIERS EXPRESSLY DISCLAIM ALL WARRANTIES OF ANY KIND, WHETHER
STATUTORY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT. SEAGATE DOES NOT PROVIDE THE THIRD PARTY SERVICES AND
MAKES NO WARRANTIES WITH RESPECT TO THE THIRD PARTY SERVICES. YOUR USE OF
THE THIRD PARTY SERVICES IS AT YOUR RISK.
6. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL, AND CERTAIN OTHER DAMAGES. TO

THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL SEAGATE OR
ITS LICENSORS OR SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE,
INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR
BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE
TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR REASONABLE CARE, FOR NEGLIGENCE,
AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN
ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT OR ANY PART OR
COMPONENT THEREOF OR RELATED SERVICE OR ANY THIRD PARTY SERVICES, OR
OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THE EULA, EVEN IN THE
EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), MISREPRESENTATION, STRICT
LIABILITY, BREACH OF CONTRACT, OR BREACH OF WARRANTY OF SEAGATE OR ITS
LICENSORS OR SUPPLIERS, AND EVEN IF SEAGATE OR ITS LICENSOR OR SUPPLIER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING ANY
FAILURE OF THE ESSENTIAL PURPOSE OF THIS AGREEMENT OR ANY REMEDY.
7. LIMITATION OF LIABILITY. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT

INCUR FOR ANY REASON WHATSOEVER, THE ENTIRE LIABILITY OF SEAGATE UNDER ANY
PROVISION OF THIS EULA AND YOUR EXCLUSIVE REMEDY HEREUNDER SHALL BE LIMITED
TO, AND IN NO EVENT WILL SEAGATE'S TOTAL CUMULATIVE DAMAGES EXCEED, THE FEES
PAID BY THE LICENSEE TO SEAGATE FOR THE PRODUCT. ADDITIONALLY, IN NO EVENT
SHALL SEAGATE'S LICENSORS OR SUPPLIERS BE LIABLE FOR ANY DAMAGES OF ANY KIND.
8. Privacy. Seagate's collection, use and disclosure of personally

identifiable information in connection with your use of the Product is
governed by Seagate's Privacy Policy which is located at
http://www.seagate.com/legal-privacy/privacy-policy/As further described in
Seagate's Privacy Policy, certain Products may include a Product dashboard
which allows users to manage Product settings, including but not limited to
use of anonymous statistical usage data in connection with personally
identifiable information. You agree to Seagate's collection, use, and
disclosure of your data in accordance with the Product dashboard settings
selected by you for the Product, or in the case of transfer as described in
Section 11, you agree to the settings selected by the prior licensee unless
or until you make changes to the settings.
9. Indemnification. By accepting the EULA, you agree to indemnify and

otherwise hold harmless Seagate, its officers, employees, agents,
subsidiaries, affiliates, and other partners from any direct, indirect,
incidental, special, consequential or exemplary damages arising out of,
relating to, or resulting from your use of the Product or any other matter
relating to the Product, including, without limitation, use of any of the
Third Party Services.
10. International Trade Compliance. The Software and any related technical
data made available for download under this EULA are subject to the customs
and export control laws and regulations of the United States ("U.S.") and may
also be subject to the customs and export laws and regulations of the country
in which the download is contemplated. Further, under U.S. law, the Software
and any related technical data made available for download under this EULA
may not be sold, leased or otherwise transferred to restricted countries, or
used by a restricted end-user (as determined on any one of the U.S.
government restricted parties lists, found at
http://www.bis.doc.gov/complianceandenforcement/liststocheck.htm) or an
end-user engaged in activities related to weapons of mass destruction
including, without limitation, activities related to designing, developing,
producing or using nuclear weapons, materials, or facilities, missiles or
supporting missile projects, or chemical or biological weapons. You
acknowledge that you are not a citizen, national, or resident of, and are not
under control of the governments of Cuba, Iran, North Korea, Sudan or Syria;
are not otherwise a restricted end-user as defined by U.S. export control
laws; and are not engaged in proliferation activities. Further, you
acknowledge that you will not download or otherwise export or re-export the
Software or any related technical data directly or indirectly to the
above-mentioned countries or to citizens, nationals, or residents of those
countries, or to any other restricted end user or for any restricted end-use.
11. General. This EULA between Licensee and Seagate is governed by and
construed in accordance with the laws of the State of California without
regard to conflict of laws principles. The EULA constitutes the entire
agreement between Seagate and you relating to the Product and governs your
use of the Product, superseding any prior agreement between you and Seagate
relating to the subject matter hereof. If any provision of this EULA is held
by a court of competent jurisdiction to be contrary to law, such provision
will be changed and interpreted so as to best accomplish the objectives of
the original provision to the fullest extent allowed by law and the remaining
provisions of the EULA will remain in force and effect. The Product and any
related technical data are provided with restricted rights. Use,
duplication, or disclosure by the U.S. government is subject to the
restrictions as set forth in subparagraph (c)(1)(iii) of DFARS 252.227-7013
(The Rights in Technical Data and Computer Product) or subparagraphs (c)(1)
and (2) of 48 CFR 52.227-19 (Commercial Computer Product - Restricted
Rights), as applicable. The manufacturer is Seagate. You may not transfer
or assign this EULA or any rights under this EULA, except that you may make a
one-time, permanent transfer of this EULA and the Software to another end
user, provided that (i) you do not retain any copies of the Software, the
Hardware, the media and printed materials, Upgrades (if any), and this EULA,
and (ii) prior to the transfer, the end user receiving this EULA and the
Software agrees to all the EULA terms. Any attempted assignment in violation
of this Section is void. Seagate, the Seagate logo, and other Seagate names
and logos are the trademarks of Seagate.
5.4.2016
===========================================================================
Various Open Source Licenses
GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies of this license

document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporates the terms
and conditions of version 3 of the GNU General Public License, supplemented
by the additional permissions listed below.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser General
Public License, and the "GNU GPL" refers to version 3 of the GNU General
Public License.
"The Library" refers to a covered work governed by this License, other than
an Application or a Combined Work as defined below.
An "Application" is any work that makes use of an interface provided by the

Library, but which is not otherwise based on the Library. Defining a subclass
of a class defined by the Library is deemed a mode of using an interface
provided by the Library.
A "Combined Work" is a work produced by combining or linking an Application

with the Library. The particular version of the Library with which the
Combined Work was made is also called the "Linked Version".
The "Minimal Corresponding Source" for a Combined Work means the

Corresponding Source for the Combined Work, excluding any source code for
portions of the Combined Work that, considered in isolation, are based on the
Application, and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the object
code and/or source code for the Application, including any data and utility
programs needed for reproducing the Combined Work from the Application, but
excluding the System Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License without
being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a facility

refers to a function or data to be supplied by an Application that uses the
facility (other than as an argument passed when the facility is invoked),
then you may convey a copy of the modified version:
* a) under this License, provided that you make a good faith effort to ensure
that, in the event an Application does not supply the function or data, the
facility still operates, and performs whatever part of its purpose remains
meaningful, or
* b) under the GNU GPL, with none of the additional permissions of this
License applicable to that copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from a header
file that is part of the Library. You may convey such object code under terms
of your choice, provided that, if the incorporated material is not limited to
numerical parameters, data structure layouts and accessors, or small macros,
inline functions and templates (ten or fewer lines in length), you do both of
the following:
* a) Give prominent notice with each copy of the object code that the Library
is used in it and that the Library and its use are covered by this License.
* b) Accompany the object code with a copy of the GNU GPL and this license
document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that, taken
together, effectively do not restrict modification of the portions of the
Library contained in the Combined Work and reverse engineering for debugging
such modifications, if you also do each of the following:
* a) Give prominent notice with each copy of the Combined Work that the
Library is used in it and that the Library and its use are covered by this
License.
* b) Accompany the Combined Work with a copy of the GNU GPL and this license
document.
* c) For a Combined Work that displays copyright notices during execution,

include the copyright notice for the Library among these notices, as well as
a reference directing the user to the copies of the GNU GPL and this license
document.
* d) Do one of the following:

o 0) Convey the Minimal Corresponding Source under the terms of this
License, and the Corresponding Application Code in a form suitable for, and
under terms that permit, the user to recombine or relink the Application
with a modified version of the Linked Version to produce a modified
Combined Work, in the manner specified by section 6 of the GNU GPL for
conveying Corresponding Source.
o 1) Use a suitable shared library mechanism for linking with the Library.
A suitable mechanism is one that (a) uses at run time a copy of the Library
already present on the user's computer system, and (b) will operate
properly with a modified version of the Library that is
interface-compatible with the Linked Version.
* e) Provide Installation Information, but only if you would otherwise be

required to provide such information under section 6 of the GNU GPL, and only
to the extent that such information is necessary to install and execute a
modified version of the Combined Work produced by recombining or relinking
the Application with a modified version of the Linked Version. (If you use
option 4d0, the Installation Information must accompany the Minimal
Corresponding Source and Corresponding Application Code. If you use option
4d1, you must provide the Installation Information in the manner specified by
section 6 of the GNU GPL for conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the Library side by
side in a single library together with other library facilities that are not
Applications and are not covered by this License, and convey such a combined
library under terms of your choice, if you do both of the following:
* a) Accompany the combined library with a copy of the same work based on the
Library, uncombined with any other library facilities, conveyed under the
terms of this License.
* b) Give prominent notice with the combined library that part of it is a

work based on the Library, and explaining where to find the accompanying
uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions of the
GNU Lesser General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Library as you

received it specifies that a certain numbered version of the GNU Lesser
General Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that published version
or of any later version published by the Free Software Foundation. If the
Library as you received it does not specify a version number of the GNU
Lesser General Public License, you may choose any version of the GNU Lesser
General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide whether
future versions of the GNU Lesser General Public License shall apply, that
proxy's public statement of acceptance of any version is permanent
authorization for you to choose that version for the Library.
===========================================================================
SeaChest tools for Windows utilize wingetopt

(https://github.com/alex85k/wingetopt).
getopt library for Windows compilers
This library was created to allow compilation linux-based software on Windows.

http://en.wikipedia.org/wiki/Getopt
The sources were taken from MinGW-runtime project.
AUTHORS:
Todd C. Miller Todd.Miller@courtesan.com

The NetBSD Foundation, Inc.
LICENSE
Copyright (c) 2002 Todd C. Miller <Todd.Miller@courtesan.com>
Permission to use, copy, modify, and distribute this software for any purpose
with or without fee is hereby granted, provided that the above copyright notice
and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Sponsored in part by the Defense Advanced Research Projects

Agency (DARPA) and Air Force Research Laboratory, Air Force
Materiel Command, USAF, under agreement number F39502-99-1-0512.
Copyright (c) 2000 The NetBSD Foundation, Inc.
All rights reserved.
This code is derived from software contributed to The NetBSD Foundation by

Dieter Baron and Thomas Klausner.
Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
======================================================================
SOURCE CODE files of the opensea open source project have been made available
to you under the Mozilla Public License 2.0 (MPL). Mozilla is the custodian of
the Mozilla Public License ("MPL"), an open source/free software license.
https://www.mozilla.org/en-US/MPL/
Mozilla Public License Version 2.0

==================================
1. Definitions
--------------
1.1. "Contributor"
means each individual or legal entity that creates, contributes to
the creation of, or owns Covered Software.
1.2. "Contributor Version"

means the combination of the Contributions of others (if any) used
by a Contributor and that particular Contributor's Contribution.
1.3. "Contribution"
means Covered Software of a particular Contributor.
1.4. "Covered Software"

means Source Code Form to which the initial Contributor has attached
the notice in Exhibit A, the Executable Form of such Source Code
Form, and Modifications of such Source Code Form, in each case
including portions thereof.
1.5. "Incompatible With Secondary Licenses"

means
(a) that the initial Contributor has attached the notice described
in Exhibit B to the Covered Software; or
(b) that the Covered Software was made available under the terms of
version 1.1 or earlier of the License, but not also under the
terms of a Secondary License.
1.6. "Executable Form"

means any form of the work other than Source Code Form.
1.7. "Larger Work"

means a work that combines Covered Software with other material, in
a separate file or files, that is not Covered Software.
1.8. "License"
means this document.
1.9. "Licensable"
means having the right to grant, to the maximum extent possible,
whether at the time of the initial grant or subsequently, any and
all of the rights conveyed by this License.
1.10. "Modifications"
means any of the following:
(a) any file in Source Code Form that results from an addition to,
deletion from, or modification of the contents of Covered
Software; or
(b) any new file in Source Code Form that contains any Covered
Software.
1.11. "Patent Claims" of a Contributor

means any patent claim(s), including without limitation, method,
process, and apparatus claims, in any patent Licensable by such
Contributor that would be infringed, but for the grant of the
License, by the making, using, selling, offering for sale, having
made, import, or transfer of either its Contributions or its
Contributor Version.
1.12. "Secondary License"
means either the GNU General Public License, Version 2.0, the GNU
Lesser General Public License, Version 2.1, the GNU Affero General
Public License, Version 3.0, or any later versions of those
licenses.
1.13. "Source Code Form"

means the form of the work preferred for making modifications.
1.14. "You" (or "Your")

means an individual or a legal entity exercising rights under this
License. For legal entities, "You" includes any entity that
controls, is controlled by, or is under common control with You. For
purposes of this definition, "control" means (a) the power, direct
or indirect, to cause the direction or management of such entity,
whether by contract or otherwise, or (b) ownership of more than
fifty percent (50%) of the outstanding shares or beneficial
ownership of such entity.
2. License Grants and Conditions

--------------------------------
2.1. Grants
Each Contributor hereby grants You a world-wide, royalty-free,

non-exclusive license:
(a) under intellectual property rights (other than patent or trademark)

Licensable by such Contributor to use, reproduce, make available,
modify, display, perform, distribute, and otherwise exploit its
Contributions, either on an unmodified basis, with Modifications, or
as part of a Larger Work; and
(b) under Patent Claims of such Contributor to make, use, sell, offer
for sale, have made, import, and otherwise transfer either its
Contributions or its Contributor Version.
2.2. Effective Date
The licenses granted in Section 2.1 with respect to any Contribution

become effective for each Contribution on the date the Contributor first
distributes such Contribution.
2.3. Limitations on Grant Scope
The licenses granted in this Section 2 are the only rights granted under
this License. No additional rights or licenses will be implied from the
distribution or licensing of Covered Software under this License.
Notwithstanding Section 2.1(b) above, no patent license is granted by a
Contributor:
(a) for any code that a Contributor has removed from Covered Software;
or
(b) for infringements caused by: (i) Your and any other third party's
modifications of Covered Software, or (ii) the combination of its
Contributions with other software (except as part of its Contributor
Version); or
(c) under Patent Claims infringed by Covered Software in the absence of
its Contributions.
This License does not grant any rights in the trademarks, service marks,
or logos of any Contributor (except as may be necessary to comply with
the notice requirements in Section 3.4).
2.4. Subsequent Licenses
No Contributor makes additional grants as a result of Your choice to

distribute the Covered Software under a subsequent version of this
License (see Section 10.2) or under the terms of a Secondary License (if
permitted under the terms of Section 3.3).
2.5. Representation
Each Contributor represents that the Contributor believes its

Contributions are its original creation(s) or it has sufficient rights
to grant the rights to its Contributions conveyed by this License.
2.6. Fair Use
This License is not intended to limit any rights You have under
applicable copyright doctrines of fair use, fair dealing, or other
equivalents.
2.7. Conditions
Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted
in Section 2.1.
3. Responsibilities
-------------------
3.1. Distribution of Source Form
All distribution of Covered Software in Source Code Form, including any

Modifications that You create or to which You contribute, must be under
the terms of this License. You must inform recipients that the Source
Code Form of the Covered Software is governed by the terms of this
License, and how they can obtain a copy of this License. You may not
attempt to alter or restrict the recipients' rights in the Source Code
Form.
3.2. Distribution of Executable Form
If You distribute Covered Software in Executable Form then:
(a) such Covered Software must also be made available in Source Code
Form, as described in Section 3.1, and You must inform recipients of
the Executable Form how they can obtain a copy of such Source Code
Form by reasonable means in a timely manner, at a charge no more
than the cost of distribution to the recipient; and
(b) You may distribute such Executable Form under the terms of this
License, or sublicense it under different terms, provided that the
license for the Executable Form does not attempt to limit or alter
the recipients' rights in the Source Code Form under this License.
3.3. Distribution of a Larger Work
You may create and distribute a Larger Work under terms of Your choice,
provided that You also comply with the requirements of this License for
the Covered Software. If the Larger Work is a combination of Covered
Software with a work governed by one or more Secondary Licenses, and the
Covered Software is not Incompatible With Secondary Licenses, this
License permits You to additionally distribute such Covered Software
under the terms of such Secondary License(s), so that the recipient of
the Larger Work may, at their option, further distribute the Covered
Software under the terms of either this License or such Secondary
License(s).
3.4. Notices
You may not remove or alter the substance of any license notices
(including copyright notices, patent notices, disclaimers of warranty,
or limitations of liability) contained within the Source Code Form of
the Covered Software, except that You may alter any license notices to
the extent required to remedy known factual inaccuracies.
3.5. Application of Additional Terms
You may choose to offer, and to charge a fee for, warranty, support,
indemnity or liability obligations to one or more recipients of Covered
Software. However, You may do so only on Your own behalf, and not on
behalf of any Contributor. You must make it absolutely clear that any
such warranty, support, indemnity, or liability obligation is offered by
You alone, and You hereby agree to indemnify every Contributor for any
liability incurred by such Contributor as a result of warranty, support,
indemnity or liability terms You offer. You may include additional
disclaimers of warranty and limitations of liability specific to any
jurisdiction.
4. Inability to Comply Due to Statute or Regulation

---------------------------------------------------
If it is impossible for You to comply with any of the terms of this

License with respect to some or all of the Covered Software due to
statute, judicial order, or regulation then You must: (a) comply with
the terms of this License to the maximum extent possible; and (b)
describe the limitations and the code they affect. Such description must
be placed in a text file included with all distributions of the Covered
Software under this License. Except to the extent prohibited by statute
or regulation, such description must be sufficiently detailed for a
recipient of ordinary skill to be able to understand it.
5. Termination
--------------
5.1. The rights granted under this License will terminate automatically
if You fail to comply with any of its terms. However, if You become
compliant, then the rights granted under this License from a particular
Contributor are reinstated (a) provisionally, unless and until such
Contributor explicitly and finally terminates Your grants, and (b) on an
ongoing basis, if such Contributor fails to notify You of the
non-compliance by some reasonable means prior to 60 days after You have
come back into compliance. Moreover, Your grants from a particular
Contributor are reinstated on an ongoing basis if such Contributor
notifies You of the non-compliance by some reasonable means, this is the
first time You have received notice of non-compliance with this License
from such Contributor, and You become compliant prior to 30 days after
Your receipt of the notice.
5.2. If You initiate litigation against any entity by asserting a patent

infringement claim (excluding declaratory judgment actions,
counter-claims, and cross-claims) alleging that a Contributor Version
directly or indirectly infringes any patent, then the rights granted to
You by any and all Contributors for the Covered Software under Section
2.1 of this License shall terminate.
5.3. In the event of termination under Sections 5.1 or 5.2 above, all
end user license agreements (excluding distributors and resellers) which
have been validly granted by You or Your distributors under this License
prior to termination shall survive termination.
************************************************************************
* *
* 6. Disclaimer of Warranty *
* ------------------------- *
* *
* Covered Software is provided under this License on an "as is" *
* basis, without warranty of any kind, either expressed, implied, or *
* statutory, including, without limitation, warranties that the *
* Covered Software is free of defects, merchantable, fit for a *
* particular purpose or non-infringing. The entire risk as to the *
* quality and performance of the Covered Software is with You. *
* Should any Covered Software prove defective in any respect, You *
* (not any Contributor) assume the cost of any necessary servicing, *
* repair, or correction. This disclaimer of warranty constitutes an *
* essential part of this License. No use of any Covered Software is *
* authorized under this License except under this disclaimer. *
* *
************************************************************************
************************************************************************
* *
* 7. Limitation of Liability *
* -------------------------- *
* *
* Under no circumstances and under no legal theory, whether tort *
* (including negligence), contract, or otherwise, shall any *
* Contributor, or anyone who distributes Covered Software as *
* permitted above, be liable to You for any direct, indirect, *
* special, incidental, or consequential damages of any character *
* including, without limitation, damages for lost profits, loss of *
* goodwill, work stoppage, computer failure or malfunction, or any *
* and all other commercial damages or losses, even if such party *
* shall have been informed of the possibility of such damages. This *
* limitation of liability shall not apply to liability for death or *
* personal injury resulting from such party's negligence to the *
* extent applicable law prohibits such limitation. Some *
* jurisdictions do not allow the exclusion or limitation of *
* incidental or consequential damages, so this exclusion and *
* limitation may not apply to You. *
* *
************************************************************************
8. Litigation
-------------
Any litigation relating to this License may be brought only in the

courts of a jurisdiction where the defendant maintains its principal
place of business and such litigation shall be governed by laws of that
jurisdiction, without reference to its conflict-of-law provisions.
Nothing in this Section shall prevent a party's ability to bring
cross-claims or counter-claims.
9. Miscellaneous
----------------
This License represents the complete agreement concerning the subject

matter hereof. If any provision of this License is held to be
unenforceable, such provision shall be reformed only to the extent
necessary to make it enforceable. Any law or regulation which provides
that the language of a contract shall be construed against the drafter
shall not be used to construe this License against a Contributor.
10. Versions of the License

---------------------------
10.1. New Versions
Mozilla Foundation is the license steward. Except as provided in Section

10.3, no one other than the license steward has the right to modify or
publish new versions of this License. Each version will be given a
distinguishing version number.
10.2. Effect of New Versions
You may distribute the Covered Software under the terms of the version
of the License under which You originally received the Covered Software,
or under the terms of any subsequent version published by the license
steward.
10.3. Modified Versions
If you create software not governed by this License, and you want to
create a new license for such software, you may create and use a
modified version of this License if you rename the license and remove
any references to the name of the license steward (except to note that
such modified license differs from this License).
10.4. Distributing Source Code Form that is Incompatible With Secondary

Licenses
If You choose to distribute Source Code Form that is Incompatible With

Secondary Licenses under the terms of this version of the License, the
notice described in Exhibit B of this License must be attached.
Exhibit A - Source Code Form License Notice

-------------------------------------------
This Source Code Form is subject to the terms of the Mozilla Public
License, v. 2.0. If a copy of the MPL was not distributed with this
file, You can obtain one at http://mozilla.org/MPL/2.0/.
If it is not possible or desirable to put the notice in a particular
file, then You may include the notice in a location (such as a LICENSE
file in a relevant directory) where a recipient would be likely to look
for such a notice.
You may add additional accurate notices of copyright ownership.
Exhibit B - "Incompatible With Secondary Licenses" Notice

---------------------------------------------------------
This Source Code Form is "Incompatible With Secondary Licenses", as

defined by the Mozilla Public License, v. 2.0.

SeaChest Info

Uploaded by

Copyright:

Available Formats

SeaChest Info

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SeaChest Info

Uploaded by

Copyright:

Available Formats

SeaChest_Info Revision: 17-Jun-2021

You can use SeaChest_Basics or SeaChest_SMART software with --smartCheck to

SMART attributes are also supplemented by SATA Device Statistics Notification

Likewise, SAS SCSI and FibreChannel interface products collect ongoing

SeaChest does not interpret attributes or thresholds. As a practical matter,

This User Guide file contains important information about SeaChest_Info.

SeaChest is a comprehensive, easy-to-use command line diagnostic tool that

Usage - Linux (run with sudo)

Usage - Windows (run as administrator)

--forceATADMA (SATA Only)

--forceATAPIO (SATA Only)

--forceATAUDMA (SATA Only)

--onlyFW [firmware revision]

-F, --scanFlags [option list]

--showSCSIDefects [ p | g | pg ] (SAS Only)

Lin example, SeaChest_Basics -d /dev/sg1 --shortDST --poll

Windows Only Usage

Display a file listing with the Linux command: ls -lah

A dot slash is a dot followed immediately by a forward slash (./). It is used

For example, ./SeaChest -d /dev/sg0 --shortDST --poll

See previous screen history with the key combination:

Display a list of sg (SCSI generic) devices with the command:

When drives are not detected by SeaChest

How to control the amount of runtime kernel messages

Tesing storage devices on the USB and Thunderbolt interfaces

Remember that the command line arguments are cAsE SeNsiTiVe.

Setup for Windows

Manual Launch for Windows

SATA HDD Device Information:

Lin: sudo ./SeaChest_Basics -i -d /dev/sg1

SATA SSD Device Information:

Lin: sudo ./SeaChest_Basics -i -d /dev/sg1

SAS HDD Device Information:

SAS SSD: Device Information

Lin: sudo ./SeaChest_Basics -i -d /dev/sg1

SATA SSD SMART Attributes example.

Reminder: Seagate Support does not help to analyze SMART attributes.

Lin: sudo ./SeaChest_Basics -d /dev/sg1 --smartAttributes

v0.0.1 02-Jun-2016 Initial SeaChest_Info using 1_9_4 libraries.

Linux versions of SeaChest tools are available as stand alone 32 or 64-bit

SeaChest Basics - Contains the most important tests and tools.

SeaChest Configure - Tools to control various settings on the drives are

SeaChest PowerControl - Seagate disk drives offer a multitude of options to

SeaChest Security - Various settings are available on modern Seagate disk

END USER LICENSE AGREEMENT

1. Ownership. This EULA applies to the Software and Products of Seagate

3. Restrictions. You are not licensed to do any of the following:

b. Reproduce the Product, in whole or in part;

c. Except as expressly authorized by Section 11 below, sell,

d. Alter, translate, decompile, or attempt to reverse engineer

f. Take any actions that would cause the Software to become

g. Remove or alter any proprietary notices or marks on the

4. Updates. If you receive an update or an upgrade to, or a new version of,

5. NO WARRANTY. THE PRODUCT AND THE THIRD-PARTY SOFTWARE ARE OFFERED ON AN

6. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL, AND CERTAIN OTHER DAMAGES. TO

7. LIMITATION OF LIABILITY. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT

8. Privacy. Seagate's collection, use and disclosure of personally

9. Indemnification. By accepting the EULA, you agree to indemnify and

GNU LESSER GENERAL PUBLIC LICENSE