Safety Data Sheet Cutan Gel Hand Sanitiser
Safety Data Sheet Cutan Gel Hand Sanitiser
Safety Data Sheet Cutan Gel Hand Sanitiser
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses PT1 Human Hygiene Biocidal Product . For full details regarding recommended uses please
refer to the product label.
Environmental The product does not meet the requirement for classification as an environmental hazard in
accordance with directive 1999/45/EEC
1/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
Pictogram
Precautionary statements P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with national regulations.
Supplemental label Eye protection not required normally but wear eye protection if you are conducting an
information operation where there is a risk of this product getting in the eyes.
BPR001 Use biocides safely. Always read the label and product information before use.
3.2. Mixtures
Composition comments The data shown are in accordance with the latest EC Directives.
Eye contact Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15
minutes. Get medical attention promptly if symptoms occur after washing.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation No specific symptoms known.
2/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations.
Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.
3/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
Protective equipment
Eye/face protection Not required normally but wear eye protection if you are conducting an operation where there
is a risk of this product getting in the eyes.
Hygiene measures DO NOT SMOKE IN WORK AREA! Promptly remove any clothing that becomes
contaminated.
Colour Colourless.
Odour Characteristic.
4/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
Oxidising properties Does not meet the criteria for classification as oxidising.
10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.
Skin corrosion/irritation
Animal data Based on available data the classification criteria are not met.
Respiratory sensitisation
Respiratory sensitisation Based on available data the classification criteria are not met.
Skin sensitisation
Skin sensitisation Based on available data the classification criteria are not met.
Carcinogenicity
Carcinogenicity Does not contain any substances known to be carcinogenic.
5/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
Reproductive toxicity
Reproductive toxicity - Does not contain any substances known to be toxic to reproduction.
development
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
Skin contact Skin irritation should not occur when used as recommended.
Eye contact Irritating to eyes. Symptoms following overexposure may include the following: Redness.
Pain.
12.1. Toxicity
Toxicity The product is not expected to be toxic to aquatic organisms.
Disposal methods Reuse or recycle products wherever possible. Dispose of waste to licensed waste disposal
site in accordance with the requirements of the local Waste Disposal Authority.
6/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
14.1. UN number
UN No. (ADR/RID) 1987
ADR/RID label 3
IMDG class 3
ICAO class/division 3
Transport labels
14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
7/8
Revision date: 28/01/2016 Revision: 4 Supersedes date: 19/08/2015
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Commission Directive 91/322/EEC of 29 May 1991 on establishing indicative limit values by
implementing Council Directive 80/1107/EEC on the protection of workers from the risks
related to exposure to chemical, physical and biological agents at work.
Commission Directive 2000/39/EC of 8 June 2000 establishing a first list of indicative
occupational exposure limit values in implementation of Council Directive 98/24/EC on the
protection of the health and safety of workers from the risks related to chemical agents at
work (as amended).
REGULATION (EU) No 528/2012 (as amended) concerning the making available on the
market and use of biocidal products.
General information Use biocides safely. Always read the label and product information before use. Only trained
personnel should use this material.
Key literature references and Where Exposure Scenarios for the substances listed in Section 3 are available they have
sources for data been assessed for the uses identified in this data sheet or on the product label and the
appropriate relevant information is incorporated into this Safety Data Sheet.
Revision comments SDS amended in line with REGULATION (EC) No 1272/2008 on Classification, Labelling and
Packaging of Substances and Mixtures (as amended)
Revision 4
Notes for Risk Phrases and The full text for Risk Phrases and Hazard Statements in section 16 relates to the reference
Hazard Statements in Full numbers in sections 2 and 3 and not necessarily the finished product classification.
This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.
8/8