Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Theft Control For The Vehicle Using - GSM

    Uploaded by

    tukali
    This document describes a vehicle theft tracking system using a GSM modem and microcontroller. The system is installed in vehicles and sends SMS alerts to authorized users if an unauthorized person tries to start the vehicle. Authorized users can then send SMS commands to control the vehicle by blocking or allowing fuel flow. The system uses a 4051 microcontroller programmed in embedded C, along with a GSM modem, LCD display, MAX232 serial communication chip, and other components. Its main purpose is to track stolen vehicles and allow owners to remotely control vehicle movement via SMS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Theft Control For The Vehicle Using - GSM

    Uploaded by

    tukali
    156 views4 pages
    This document describes a vehicle theft tracking system using a GSM modem and microcontroller. The system is installed in vehicles and sends SMS alerts to authorized users if an unauthorized person tries to start the vehicle. Authorized users can then send SMS commands to control the vehicle by blocking or allowing fuel flow. The system uses a 4051 microcontroller programmed in embedded C, along with a GSM modem, LCD display, MAX232 serial communication chip, and other components. Its main purpose is to track stolen vehicles and allow owners to remotely control vehicle movement via SMS.

    Original Title

    Theft Control for the Vehicle Using _GSM

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a vehicle theft tracking system using a GSM modem and microcontroller. The system is installed in vehicles and sends SMS alerts to authorized users if an unauthorized person tries to start the vehicle. Authorized users can then send SMS commands to control the vehicle by blocking or allowing fuel flow. The system uses a 4051 microcontroller programmed in embedded C, along with a GSM modem, LCD display, MAX232 serial communication chip, and other components. Its main purpose is to track stolen vehicles and allow owners to remotely control vehicle movement via SMS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    156 views4 pages

    Theft Control For The Vehicle Using - GSM

    Uploaded by

    tukali
    This document describes a vehicle theft tracking system using a GSM modem and microcontroller. The system is installed in vehicles and sends SMS alerts to authorized users if an unauthorized person tries to start the vehicle. Authorized users can then send SMS commands to control the vehicle by blocking or allowing fuel flow. The system uses a 4051 microcontroller programmed in embedded C, along with a GSM modem, LCD display, MAX232 serial communication chip, and other components. Its main purpose is to track stolen vehicles and allow owners to remotely control vehicle movement via SMS.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4

    THEFT TRACKING USING GSM MODEM

    INTRODUCTION

    . The proposed system is based on 4051 µcontroller, which is in our


    syllabus.
    For doing this project we use some of the software like
     Embedded C for programming the application software to the
    microcontroller.
     Protel schematic software is used for designing the circuit diagram for
    this project.
     Express PCB software is used for designing the PCB for this project.
    (Since PCB making is a big process and involves lot of machineries, which
    are expensive. So we are going to outsource this to the manufacture.)

    ABSTRACT:

    The main aim of this project is to track the theft vehicle by using GSM
    modem with a micro controller.
    Position of the vehicle can be tracked down, owner of the vehicle with this
    module installed in his vehicle. Owner wants to know where his vehicle is, he
    will send an SMS to that particular SIM number which is present in the modem
    of the module. The SMS, which has sent, by the owner will reach the vehicle,
    which is travelling and there it will compare the password and the command. If
    every thing matches then it will get the coordinates of the vehicle position. In
    this way we can easily map the vehicle position from the place where they are
    residing.
    In our project the PCB is designed by using Express PCB & the circuit is
    designed by using Proteus software.
    WORKING PRINCIPLE:

    This project consists of GSM modem with a micro controller. The whole
    system is attached to the vehicle. The authorized user nos are programmed in
    the microcontroller.
    If an unauthorized person starts the vehicle the module will send sms or
    give a call to the 1st owner no(super management) if he his not
    available(switched off/not reachable)it will inform the second person. Like this
    it will switch to different users. In reply to the ring/sms from the module the
    authorized person gives call or sends sms to control the movement of the
    vehicle. If the owner wants to stop the vehicle he can send sms/call to that
    particular GSM unit then depending on the reply fuel control unit will block
    Or switch on the fuel to control the vehicle movement.
    Every time the vehicle is started the module will send sms or give ring to
    the super management if he is not available (or busy) then only it will switch to
    other authorized users.
    BLOCK DIAGRAM
    VECHICLE
    IGNITION
    KEY

    POWER
    89C51
    ANTENNA SUPPLY
    MICROCONTROLLER
    VEHICLE
    IGNITION
    CONTROL

    GSM MODEM MAX 232 FUEL CONTROL


    VEHICLE

    COMPONENTS USED:

     Power Supply 5v DC - 7805


     Micro controller - 4051
     LCD - (Liquid crystal display) 2 x16
     Serial Communication - MAX 232
     GSM modem (900/1800 MHz)
    SOFTWARE USED:

     Embedded C.
     KEIL C.

    APPLICATION OF THIS PROJECT:

    • For identification of person, vehicles etc


    • For finding location of the vehicle.

    You might also like