S5612

SWITCH
Varied Service
Characteristics Versatile
IPv6 Solution Complete
Carrier-Level High
Security Mechanism
Reliability
Full Layer-3
Advanced Hardware Functions
Architecture and
Industry-leading Port
Supports 8GE Density
Ports and 12 10GE
SFP+ Ports

Carrier-Level Aggregation Layer-3 Ethernet Switch

Innovative BVSS (BDCOM Virtual Switch System):
S5612 can virtualize multiple physical devices into one. The
performance, reliability and management of the virtual
system are superior to the physical ones;
Product Overview
Improved Performance:
BDCOM S5612 is a new generation of BVSS makes full use of each link in the physical devices, which
aggregation 10GE switch introduced by avoids STP blocking the link and protects the original link to
Shanghai Baud Data Communication the maximum extent;
Co., LTD. It is targeted at the IP MAN
(metropolitan area network), campus High Reliability:
networks and enterprise networks. It is Based on the advanced distribution mechanism and efficient
developed on the basis of high performance cross-physical link aggregation link function, the logic control
hardware and BDROS - a software platform plane, service control plane and service data plane are
with BDCOM own independent intellectual separated. Thus, the device can support continuous layer3
property rights. It supports multiple services routing forwarding, avoiding service interruption as a result of
like IPv6, MPLS, VPN and network security a single point of failure;
based on L2/L3/L4 wire-speed switching
service. It also supports nonstop upgrade, Easy Management:
continuous forwarding, graceful restarting BVSS realizes single IP management, greatly improving the
and redundancy protection. networking efficiency and lowering the operating cost.

It supports 8 GE ports and 12 10GE ports.

Product Characteristics

Carrier-level High Reliability Versatile IPv6 Solution

S5612 supports STP/RSTP/MSTP, VRRP protocol, S5612 supports the IPv6 protocol suite, IPv6
Ethernet ring protection, dual master-slave uplink neighbor discovery, ICMPv6, path MTU discovery,
protection and LACP link aggregation; DHCPv6, etc;

S 5 6 1 2 s u p p o r t s I SS U ( I n -S e r v i c e S o f t w a re S5612 supports Ping, Traceroute, Telnet, SSH, ACL

Upgrade); based on IPv6;
S5612 supports BFD mechanism;
S5612 supports MLD, MLD Snooping, IPv6 static
S5612 suppor ts Ethernet OAM mechanism, routing, RIPng, OSPFv3 and BGP4+, etc;
802.3ah, 802.1ag and ITU-Y.1731;
S5612 supports IP v6 tunnel: manual tunnel,
High reliability (99.999%): MTTR of S5612 is 50ms, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP;
meeting the requirement of the carrier-level S5612 supports IPv4 transiting to IPv6: IPv6 manual
service. tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP
tunnel.
Varied Service Features
Innovative Energy-saving Design
S5612 supports layer2 and layer3 multicast routing
protocol, which enable the device can access Intelligent power management: The power system
to IPTV, HD video surveillance and HD video of S5612 supports real-time monitoring the device
conference; and the slow-start. It is also power-saving;

S5612 supports layer3 routing protocol and super- Intelligent fan management system: The fan
large routing table capacity, which enables the system of S5612 supports automatic speed
device is available in large campus networks, regulation, which efficiently slow the fan speed and
enterprise networks and industry networks; mitigate the noise;

S5612 supports layer2 MPLS VPN. Comply with the international standard IEEE
802.3az
Security+

Equipment-level security: The advanced hardware

infrastructure design realizes the level-based
packet schedule and packet protection, prevents
DoS-/TCP- related SYN Flood, UDP Flood,
Broadcast Storm or large traffic attacks, and
supports level-based command line protection,
endowing different levels of users with different
management permissions.

Perfect security authentication mechanisms: IEEE

802.1x, Radius and BDTacacs+.

S5612 supports storm/multicast/unicast limit,

ensuring the normal running of equipment in
harsh network conditions.

S5612 supports perfect ring detection mechanism,

ensuring the long-term stable running of network.

S5612 supports port isolation within the same VLAN,

DHCP-Snooping, and IP + MAC + Port binding.

BDCOM S5612 Switch

2
Model Lists

S5612
Full 10GE Ethernet Routing Switch

· 1 console port
· 8 GE TX ports
· 12 10GE/GE SFP+ ports

Application Diagram

POL 10G Fiber

SOHO
Gigabit Fiber
GP1501DT GP1704-4F GE Copper
xPON ONU xPON ONU
100M Fiber
100M Copper

OS-1X16SCPC-U
S2928
Chassis Splitters
L2+ managed Ethernet switch

GP3600-08 Internet
High-density Standalone
GPON OLT

FTTH

GP1704-4F-E GP1704-4GVC-S S5612

xPON ONU xPON ONU
8 GE TX ports S3756P
12 10GE SFP+ ports L3 managed Ethernet POE Routing
switch

ISP-P2P
P2P CPE

OS-1X16SCPC-U
Chassis Splitters

GP3600-16
High-density-Standalone
S2936F
GPON OLT
L2+ managed optical Ethernet switch

BDCOM S5612 Switch

3
Product Specifications
Item S5612
Interface 8GE TX ports, 12 10GE/GE SFP+ ports
Console 1 RJ45 port
Backplane 176Gbps
Forwarding rate 132 Mpps
Chassis Dimensions(WxDxH)(mm) 440x315x44
Package Weight(KG)(empty) 3.6
Dimensions(WxDxH)(mm) 576x448x94
Power consumption Weight(KG) 4.8
no-load < 35W
Power supply full-load 50W
AC: 100V-240V,50Hz±10% Single AC, (optional for Dual Power)
Total output BTU (1000BTU/H=293W) 170.65
Fan number 2
Noise@25°C（dBA) 57
MTBF(H) >100,000
Forwarding mode Store-forward
Flash (MB) 16
DRAM (MB) 512
MAC 32K
Buffer size(MB) 3
Jumbo frame 9K
Routing table IPv4 32K
IPv6 8K
ARP table IPv4 10K
IPv6 5K
Total SVI 1K

Features
VLAN · Manual tunnel, ISATAP tunnel, 6 Reliability
· 4K Active VLAN, QinQ & Selective to 4 tunnel · Static/LACP link aggregation,
QinQ, GVRP, Private VLAN, Voice- Interface backup
VLAN
MPLS
· BVSS virtual-stacking
· LDP protocol, Multi-VRF, · EAPS and ERPS
Spanning Tree · MPLS L2 VPN · URPF, LLDP
· 802.1D (STP), 802.1W (RSTP) and · ISSU
802.1S (MSTP) QoS
· VRRP
· BPDU guard, root guard and · CAR, HQoS, MAC/IP/TCP/UDP/VLAN/
COS/DSCP/TOS based QoS, 802.1P/
· 1+1 power backup
loopback guard
DSCP priority re-labeling, SP, WRR,
and “SP+WRR”, Tail-Drop, WRED,
Management
Multicast
· PIM-SM, PIM-DM, IGMP v1/v2/v3, flow monitoring and traffic shaping · Console, Telnet, SSH v1/2, HTTP,
HTTPS
IGMP Snooping, IGMP Fast Leave,
MVR, IGMP filter
Security · SNMP v1/v2/v3, RMON
· Port isolation, Port security, and · TFTP, FTP, SFTP
IPv4 “IP+MAC+port” binding, MAC sticky · NTP, SPAN, RSPAN
· Static routing, RIP v1/v2, OSPF, BGP, · DHCP Snooping and option 82, DAI · sFlow
PBR, ECMP & IP source guard, PPPoE+,
· BFD for OSPF, BGP · IEEE 802.1x, Radius and BDTacacs+ Accessories
· L2/L3/L4 ACL flow identification and · Power cord, rackmount kits,
IPv6 filtration console cable
· ICMPv6, DHCPv6, ACLv6 and · Anti-attack from DDoS, TCP’s SYN
IPv6 Telnet Flood, UDP Flood, etc. Environment
· IPv6 neighbor discovery, Path · Broadcast/multicast/unknown · Operating temperature/humidity:
MTU discovery unicast storm-control 0℃ -50℃ ,10%-90% non-condensing
· MLD V1/V2, MLD snooping · MD5, SHA-256, RSA-1024, AES256, etc. · Storage temperature/humidity:
· IPv6 Static Routing, RIPng, -20℃ -70℃ , 5%-95% non-condensing
OSPFv3, BGP4+
Certification
BDCOM S5612 Switch · CE, FCC, ROHS

4
Ordering Information

Item Description
S5612 switches
S5612 Full 10GE Ethernet Routing Switch with 12 10GE ports and 8 GE ports (1
Console port, 12 10GE/GE SFP+ ports, 8 GE TX ports; AC220V single power
supply; the cooling fan, 1U, 19-inch rack-mounted installation)
S5612-2AC Full 10GE Ethernet Routing Switch with 12 10GE ports and 8 GE ports (1
Console port, 12 10G/GE SFP+ ports, 8 GE TX ports; AC220V dual power
supply; the cooling fan, 1U, 19-inch rack-mounted installation )
Optical Modules
10GE Optical Modules
SFP+TX 10GE SFP+-to-RJ45 module
SFP+SX 10GE SFP+ multi-mode (300m, 850nm, LC)
SFP+LX-10 10GE SFP+ single-mode (10Km, 1310nm, LC, DDM)
SFP+LX-20 10GE SFP+ single-mode (20Km, 1310nm, LC, DDM)
SFP+LX-40 10GE SFP+ single-mode (40Km, 1550nm, LC, DDM)
SFP+LX-80 10GE SFP+ single-mode (80Km, 1550nm, LC, DDM)
SFP+LX-SM-1270-10 10GE SFP+ single-mode, single-fiber (10Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-10 10GE SFP+ single-mode, single-fiber (10Km,TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-20 10GE SFP+ single-mode, single-fiber (20Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-20 10GE SFP+ single-mode, single-fiber (20Km,TX1330/RX1270, LC, DDM)
SFP+LX-SM-1270-40 10GE SFP+ single-mode, single-fiber (40Km, TX1270/RX1330, LC, DDM)
SFP+LX-SM-1330-40 10GE SFP+ single-mode, single-fiber (40Km,TX1330/RX1270, LC, DDM)
GE Optical Modules
GSFP-TX-B GE SFP-to- RJ45 module
GSFP-SX-D GE SFP multi-mode (500m, 850nm, LC, DDM)
GSFP-LX-10-D GE SFP single-mode (10Km, 1310nm, LC, DDM)
GSFP-LX-20-D GE SFP single-mode (40Km, 1310nm, LC, DDM)
GSFP-LX-40-D GE SFP single-mode (40Km, 1310nm, LC, DDM)
GSFP-ZX-80-D GE SFP single-mode (80Km, 1550nm, LC, DDM)
GSFP-ZX-120-D GE SFP single-mode (120Km, 1550nm, LC, DDM)
GSFP-LX-SM1310-10-BIDI GE SFP single-mode, single fiber (10Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-10-BIDI GE SFP single-mode, single fiber (10Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-20-BIDI GE SFP single-mode, single fiber (20Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-20-BIDI GE SFP single-mode, single fiber (20Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1310-40-BIDI GE SFP single-mode, single fiber (40Km, TX1310/RX1550, LC, DDM)
GSFP-LX-SM1550-40-BIDI GE SFP single-mode, single fiber (40Km, TX1550/RX1310, LC, DDM)
GSFP-LX-SM1490-80-BIDI GE SFP single-mode, single fiber (80Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-80-BIDI GE SFP single-mode, single fiber (80Km, TX1550/RX1490, LC, DDM)
GSFP-LX-SM1490-120 GE SFP single-mode, single fiber (120Km, TX1490/RX1550, LC, DDM)
GSFP-LX-SM1550-120 GE SFP single-mode, single fiber (120Km, TX1550/RX1490, LC, DDM)

Copyright © Shanghai Baud Data Communication Co., LTD.2019. All Rights Reserved.

This document is BDCOM Public Information. BDCOM reserves the right to alter,
update and otherwise change the information contained in the document from time
to time.
www.bdcom.cn