Standard Terms and Conditions of Purchase

Page 1 of 12
STANDARD TERMS AND CONDITIONS OF PURCHASE
1. ACCEPTANCE OF TERMS AND CONDITIONS. Seller agrees to be bound by and to comply with all terms set forth herein and
in the purchase order, to which these terms are attached and are expressly incorporated by reference (collectively, the “Order”),
including any amendments, supplements, requirements, specifications, and other documents referred to in this Order and located at
the following link: (https://www.wabteccorp.com/supplier-resources). Acknowledgement of this Order, including, without limitation,
performance by Seller, shall be deemed acceptance of this Order. The terms set forth in this Order take precedence over any
alternative terms in any other document connected with this transaction unless such alternative terms are: (A) part of a written supply
agreement (“Supply Agreement”), which has been negotiated between the parties and which the parties have expressly agreed may
override these terms in the event of a conflict and/or (B) issued by Purchaser as set forth on the face of the Order to which these
terms are attached and in the absence of a Supply Agreement. In the event these terms are part of a written Supply Agreement
between the parties, the term “Order” used herein shall mean any purchase order issued under the Supply Agreement. In the event
of a conflict between the terms set forth herein and in the Order to which these terms are attached, the terms in the Order shall
control; provided, however, in the event that the parties have executed a Supply Agreement, the terms of the Supply Agreement shall
control over the Order. This Order does not constitute an acceptance by Purchaser of any offer to sell, any quotation, or any proposal.
Reference in this Order to any such offer to sell, quotation or proposal shall in no way constitute a modification of any of the terms of
this Order. ANY ATTEMPTED ACKNOWLEDGMENT OF THIS ORDER CONTAINING TERMS INCONSISTENT WITH OR IN
ADDITION TO THE TERMS OF THIS ORDER IS NOT BINDING UNLESS SPECIFICALLY ACCEPTED BY PURCHASER IN
WRITING. This offer expressly limits acceptance to the terms of this offer. Notification of objection is hereby given to any term in
response to this offer that does not exactly match the terms of this offer.
2. PRICES, PAYMENTS AND TAXES. All prices are firm and shall not be subject to change. No extra charges of any kind will be
allowed unless specifically agreed in writing by Purchaser. Seller warrants the pricing for any goods or services shall not exceed the
pricing for the same or comparable goods or services offered by Seller to third parties. Seller shall promptly inform Purchaser of any
lower pricing levels for same or comparable goods or services and the parties shall promptly make the appropriate price adjustment.
Notwithstanding anything contained herein to the contrary, in the event that products purchased by Purchaser exceed Purchaser’s
original forecast and/or Seller’s quotation by ten percent (10%) or more, then Purchaser and Seller agree that Purchaser shall be
entitled to a reduction in the price on all future Orders of the products equal to an amount agreed to by the parties; provided, however,
in no event shall the price be greater than ninety percent (90%) of the current price of the products. Purchaser’s standard payment
terms in effect shall be as follows unless prohibited by law or alternatively stated in the purchase order:
2.1 STANDARD:
(A) Payment Terms. Unless otherwise stipulated on the Order or agreed in writing by Purchaser, Purchaser will initiate
payment of the full invoiced amount (not discounted) to Seller on or before the150 th day from the “Payment Start Date” described in
Section 2.2 below (the “Net Due Date”). Settlement and invoicing must be paperless and in a format acceptable to Purchaser. Options
acceptable to Purchaser include Web Invoicing, Evaluated Receipt Settlement and Electronic Data Interchange. Seller must provide
banking information to establish electronic funds transfers for U.S. suppliers and wire transfers for non-U.S. suppliers.
(B) Batched Payments. Purchaser may choose to group all invoices that have not been discounted and to have them paid
in a monthly batched payment process as follows: (i) non-discounted invoices that have Net Dates ranging from the sixteenth day of
the first month of a calendar quarter to the fifteenth day of the second month of the calendar quarter will be grouped together and
paid on the third day of the second month of that calendar quarter, (ii) non-discounted invoices that have net dates ranging from the
sixteenth day of the second month of a calendar quarter to the eighth day of the third month of a calendar quarter will be grouped
together and paid on the third day of the third month of that calendar quarter, and (iii) non-discounted invoices that have net dates
ranging from the ninth day of the third month of a calendar quarter to the fifteenth day of the first month of the next calendar quarter
will be grouped together and paid on the third day of the first month of that next calendar quarter or, if any payment date described
above is not a business day, on the next business day (each such payment date being referred to as the “Monthly Batch Payment
Date”), with the result that some invoices shall be paid earlier than their Net Dates and some invoices shall be paid later than their
Net Dates. Alternatively, Purchaser may choose to group and pay on a quarterly basis all invoices that have not been discounted as
follows: (i) invoices with Net Dates ranging from the ninth day of February to the eighth day of May shall be grouped and Purchaser shall
initiate payment on the third day of April or if that day is not a business day, then on the next business day; (ii) invoices with Net Dates
ranging from the ninth day of May to the eighth day of August shall be grouped and Purchaser shall initiate payment on the third day
of July or if that day is not a business day, then on the next business day; (iii) invoices with Net Dates ranging from the ninth day of
August to the eighth day of November shall be grouped and Purchaser shall initiate payment on the third day of October or if that day
is not a business day, then on the next business day; and (iv) invoices with Net Dates ranging from the ninth day of November to the
eighth day of February shall be grouped and Purchaser shall initiate payment on the third day of January or if that day is not a
business day, then on the next business day (each such payment date being referred to as the “Quarterly Batch Payment Date”),
with the result that some invoices shall be paid earlier than their Net Dates and some invoices shall be paid later than their Net Dates.
2.2 PAYMENT START DATE:
(A) The “Payment Start Date” is the latest of the required date identified on this Order, the received date of the goods
and/or services in Purchaser’s receiving system or the date of Purchaser’s receipt of valid invoice from Seller. The received date of
the goods and/or services in Purchaser’s receiving system will occur: (A) in the case where the goods are shipped directly to
Purchaser and/or services are performed directly for Purchaser, within forty-eight (48) hours of Purchaser’s physical receipt of the
Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

Page 2 of 12
goods or services; (B) in the case of goods shipped directly to: (1) Purchaser’s customer or a location designated by Purchaser’s
customer (“Material Shipped Direct” or “MSD”); or (2) a non-Purchaser/non-customer location to be incorporated into MSD, within
forty-eight (48) hours of Seller presenting Purchaser with a valid bill of lading confirming that the goods have been shipped from
Seller’s facility; (C) in the case where goods are shipped directly to a third party in accordance with this Order, within forty-eight (48)
hours of Purchaser’s receipt of written certification from the third party of its receipt of the goods; or (D) in the case of services
performed directly for a third party in accordance with this Order, within forty-eight (48) hours of Purchaser’s receipt of written
certification from Seller of completion of the services.
(B) Seller agrees to submit correct and complete invoices for goods or services within 180 days of the received date
of the goods or services. Any claim involving perceived nonpayment, underpayment or any other payment related issues shall be
deemed waived unless asserted in writing within sixty (60) days after (1) receipt by Seller of Purchaser’s payment or (2) the Net Due
Date, whichever first occurs.
2.3 TAXES: Seller’s price includes all payroll and/or occupational taxes, any value added tax that is not recoverable by
Purchaser and any other taxes, fees and/or duties applicable to the goods and/or services purchased under this Order; provided,
however, that any value added tax that is recoverable by Purchaser, state and local sales, use, excise and/or privilege taxes, if
applicable, will not be included in Seller’s price but will be separately identified on Seller’s invoice. If Seller is obligated by law to
charge any value added and/or similar tax to Purchaser, Seller shall ensure that if such value added and/or similar tax is applicable,
that it is invoiced to Purchaser in accordance with applicable rules so as to allow Purchaser to reclaim such value added and/or
similar tax from the appropriate government authority. Neither party is responsible for taxes on the other party’s income or the income
of the other party’s personnel or subcontractors. If Purchaser is required by government regulation to withhold taxes for which Seller
is responsible, Purchaser will deduct such withholding tax from payment to Seller and provide to Seller a valid tax receipt in Seller’s
name. If Seller is exempt from such withholding taxes or eligible for a reduced rate of withholding tax as a result of a tax treaty or
other regime, Seller shall provide to Purchaser a valid tax residency certificate or other documentation, as required by the applicable
government regulations, at a minimum of thirty (30) days prior to payment being due. The following state sales and use tax
identification numbers are applicable for goods delivered into the States of Ohio and North Carolina, Massachusetts, and
Pennsylvania: (A) Ohio - DPP# 98-000-604; (B) North Carolina - DPP# 457; (C) Massachusetts - DPP# 00008; (D) Pennsylvania -
DPP# 51-995692.
2.4 SET-OFF: Purchaser shall be entitled to set-off any amount owing from Seller to Purchaser or to any of Purchaser's Affiliates
against any amount payable under this Order.
3. GOVERNING LAW AND DISPUTE RESOLUTION.

3.1 This Order shall be governed by and interpreted in accordance with the laws of the jurisdiction in which Purchaser is
organized, notwithstanding such jurisdictions conflict of laws rules. For any Purchaser organized in the U.S., this Order shall be
governed by and interpreted in accordance with the substantive laws of the State of New York, U.S., notwithstanding its conflict of
laws rules. The application of the United Nations Convention on the International Sale of Goods is hereby excluded except as
expressly referenced herein.
3.2 Any dispute, controversy or claim arising out of or relating in any way to this Order, whether in contract, tort, common law,
statutory law, equity, or otherwise, including any question regarding its existence, validity, or scope, shall be resolved in accordance
with this Section 3. Purchaser and Seller shall attempt amicably to resolve any controversy, dispute or difference arising out of this
Order, by commercial negotiations. If a dispute is not resolved by commercial negotiations, either party shall, upon written notice
(“Notice”), refer the dispute to either:
(A) a meeting of appropriate senior management representatives from each of the parties who will confer in good faith to
attempt to resolve the matter; or
(B) , to mediation, to be held within thirty (30) business days after the giving of Notice, or such later date as may be mutually
agreed. If the dispute is not resolved within the thirty (30) days of the Notice, or within the mutually agreed-upon later time period,
either party may commence arbitration in accordance with Section 3.3, below.
3.3 In the event such dispute cannot be resolved pursuant to Section 3.2, such dispute, claim or controversy arising out of or
relating to the Order or the breach, termination, enforcement, interpretation or validity thereof, including the determination of the
scope or applicability of this arbitration provision, shall be determined by arbitration administered by JAMS pursuant to its
Comprehensive Arbitration Rules and Procedures and in accordance with the Expedited Procedures in those Rules. The number of
arbitrators shall be three. The place of arbitration shall be New York, New York, and it shall be held as promptly as possible at such
time as the arbitrators may determine. If there is any inconsistency between the JAMS rules and this arbitration provision, the terms
of this arbitration provision will control. Neither party shall have the right to request discovery beyond that which is permitted by the
Expedited Procedures unless the parties agree or the arbitrators order otherwise on the basis of compelling need or a showing of
severe prejudice by a party. The decision of the arbitrators will be final and binding upon the parties, and the fees and expenses
owed to JAMS and the arbitrators will be shared equally between the parties. Judgment upon the arbitration award may be entered
in any court of competent jurisdiction, or application may be made to such court for a judicial acceptance of the award and an order
of enforcement, as the case may be. Anything to the contrary in this Order notwithstanding, neither party shall be prevented from
applying to a court of competent jurisdiction for such preliminary or interim injunctive relief, or relief in aid of arbitration, as may be
necessary to preserve or restore the status quo. The parties agree that any arbitration proceeding occurring pursuant to this
arbitration provision will be treated as the confidential information of both parties and that the existence of the proceeding and any
element of it (including, but not limited to, any pleadings, briefs or other documents submitted or exchanged and any testimony or
other oral submissions and awards) will not be disclosed beyond the arbitration panel, except to the extent required under applicable

Page 3 of 12
law, in which event the party making such disclosure shall so notify the other party as promptly as is practicable (if possible, prior to
making such disclosure) and shall seek confidential treatment of such information.
3.4 This Dispute Resolution provision shall not apply to and will not bar litigation regarding claims related to a party’s proprietary
or intellectual property rights.
4. ASSIGNMENT, SUBCONTRACTING AND CHANGE IN OWNERSHIP.

4.1 ASSIGNMENT AND SUBCONTRACTING. Upon notice to Seller and without the requirement of any further action by any
person or entity, Purchaser may assign this Order (or portion thereof) or its rights hereunder to a successor or subsidiary of Purchaser,
or to any of its Affiliates, or pursuant to a statutory merger or consolidation, or to any purchaser of, or other successor in interest.
Because performance of this Order is specific to Seller, Seller may not assign its rights or obligations under this Order without
Purchaser’s prior written consent, including, but not limited to, the assignment of Seller’s accounts receivable under this Order.
Purchaser may withhold its consent or condition its consent to any assignment at its sole discretion and any attempted assignment
in violation of this provision shall be null and void. In the event that Purchaser provides Seller with written consent to assign Seller’s
accounts receivable (on an individual basis or as part of a broader arrangement): (i) Seller shall provide Purchaser with all information
regarding the assignment reasonably requested by Purchaser; (ii) Seller shall not modify, cancel or allow such assignment
arrangement to lapse without first giving Purchaser forty-five (45) days’ prior written notice, and (iii) Purchaser shall only be responsible
for making payments as directed by Seller and Seller shall indemnify, defend and hold harmless Purchaser its officers, directors,
shareholders, Affiliates, subsidiaries, agents, and assigns from and against all claims, suits, actions, proceedings, damages, losses
and expenses, including attorneys’ fees, arising out of, related to, or resulting from Seller’s assignment or purported assignment of its
accounts receivable. Notwithstanding the foregoing, Purchaser may, at any time, revoke its consent to Seller’s assignment of future
accounts receivable by providing fifteen (15) days’ prior written notice to Seller. Seller shall not subcontract or delegate performance
of all or any substantial part of the work called for under this Order without Purchaser’s prior written consent. Should Purchaser grant
consent to Seller’s assignment or subcontract, Seller shall cause such assignee or subcontractor to be bound by the terms and
conditions of this Order. Further, Seller shall advise Purchaser of any subcontractor or supplier to Seller:
(A) that will have at its facility any parts or products with Purchaser’s or any of its Affiliates’ name, logo or trademark (or that will be
responsible to affix the same); and/or (B) 50% percent or more of whose output from a specific location is purchased directly or
indirectly by Purchaser. In addition, Seller will obtain for Purchaser, unless advised to the contrary in writing, written acknowledgement
by such assignee, subcontractor and/or supplier to Seller of its commitment to act in a manner consistent with Purchaser’s integrity
policies, and to submit to, from time to time, on-site inspections or audits by Purchaser or Purchaser’s third party designee as
requested by Purchaser. If Seller subcontracts any part of the work under this Order outside of the final destination country where the
goods purchased hereunder will be shipped, Seller shall be responsible for complying with all customs requirements related to such
sub-contracts, unless otherwise set forth in this Order. The term “Affiliate” as it relates to Purchaser shall mean with respect to
Purchaser means any entity (including, without limitation, any individual, corporation, company, partnership, limited liability company
or group) that directly, or indirectly through one or more intermediaries, controls, is controlled by or is under common control with
Purchaser.
4.2 CHANGE IN OWNERSHIP. If a third party submits a solicited or unsolicited offer to Seller that would result in a Change of
Ownership or Control of Seller, as defined below, Seller shall give notice of such offer, including the identity of the offeror, to Purchaser
as early as commercially practical following Seller’s receipt of the offer. Before Seller accepts the offer, it shall give Purchaser an
opportunity, within a reasonable time, to advise Seller of its impact on performance of this Order. If the Change in Ownership and
Control occurs, Purchaser has the right at its discretion to terminate this Order. In the event of such termination, Seller agrees to
render full cooperation to Purchaser in order to minimize disruption to the Purchaser's program. Pending termination or in lieu of
termination, Purchaser may require Seller to provide adequate assurance of performance, including, but not limited to the institution
of special controls regarding the protection of Purchaser's Property, including all intellectual property and proprietary information.
(For purposes of this section, the term “Change in Ownership or Control” shall mean any of the following: (A) the sale of equity shares
controlling 20% or more of the voting rights in Seller or Seller’s parent, (B) the sale, lease, transfer or other disposition of substantially
all of the assets of Seller or Seller’s parent, (C) a merger, reorganization, consolidation, share exchange, recapitalization, business
combination, liquidation or dissolution or similar transaction, (D) a tender offer or exchange offer for any of the outstanding shares of
capital stock of Seller or Seller’s parent, (E) a sale by Seller of the assets relating to the goods Seller produces or will produce for
Purchaser, or (F) any public disclosure of a proposal or plan or intention to do any of the foregoing.)
5. TRANSPORTATION AND PACKAGING.

5.1 Unless otherwise stipulated on the face of the purchase order,
(A) goods covered by this Order shall be shipped and delivered F.C.A. Seller's door (Incoterms, 2010 Edition).
(B) In any event, title to goods shall pass to Purchaser upon (1) arrival of such goods at the specified delivery location,
and (2) Purchaser’s inspection and receipt into its receiving system. Purchaser insures all goods for which it accepts risk of loss while
such goods are in transit. Therefore, Seller shall not declare any insurance value on such goods shipped via Purchaser’s designated
carrier.
5.2 Seller shall release rail or truck shipments at the lowest released valuation permitted in the governing tariff or classification.
Purchaser will pay no charges for unauthorized transportation. Any unauthorized shipment, which results in excess transportation
charges, must be fully prepaid by the Seller. If Seller does not comply with the stated delivery schedule, Purchaser may require
delivery by the fastest means available. The charges resulting from this mode of transportation must be fully prepaid and the Seller
must absorb the full cost of the shipment.

Page 4 of 12
5.3 Upon Purchaser's request, all shipment containers for goods shall be labeled in accordance with Purchaser's Bar Code
Shipping Label Instructions. Seller shall submit example labels for approval within sixty (60) days of said request. Seller shall
designate an individual responsible for compliance with said instructions and shall act as the Seller's contact for issues concerning
bar code labels.
5.4 Packing, preservation and marking will be in accordance with the specification, drawing or as specified on the Order, or if
not specified, the best commercially accepted practice will be used, and at a minimum consistent with applicable law. In addition,
Seller shall include the following information on each shipment under this Order: Purchaser’s Order number, case number, routing
center number (if provided by Purchaser’s routing center), country of manufacture, destination shipping address, commodity
description, gross/net weight in kilograms and pounds, dimensions in centimeters and inches, center of gravity for items greater than
one (1) ton and precautionary marks (e.g., fragile, glass, air ride only, do not stack, etc.), loading hook/lifting points and chain/securing
locations where applicable to avoid damage and improper handling. Seller shall place all markings in a conspicuous location as
legibly, indelibly and permanently as the nature of the article or container will permit. All goods shall be packed in an appropriate
manner, consistent with Purchaser’s packaging specifications outlined and set forth in document number 84A220081 which may be
accessed at the following link (https://www.wabteccorp.com/supplier-resources). Goods that cannot be packed due to size or weight
shall be loaded into suitable containers, pallets or crossbars thick enough to allow safe lifting and unloading and shall be packed in
accordance with the best commercially accepted practice in the industry. Vehicles that reach their destination and present unloading
difficulties due to Seller’s failure to comply the requirements of this section may be sent back to their point of departure at Seller’s
expense.
5.5 The Purchase Order number shall appear on all shipping manifests, bills of lading, invoices and correspondence and shall
be marked on or tagged to all products shipped. A packing list and any other requested document must accompany each shipment
showing Purchase Order number, item number and quantity of each product packaged (collectively, “Order Information”). (All other
documentation should also include such Order Information). For any international shipments (except for shipments to Purchaser’s
customer’s location), Seller shall also include a copy of airway or truck bill of lading and Seller’s commercial invoice.
5.6 Failure of Seller to comply with any such Purchaser specification shall cause all resulting transportation charges to be for
the account of Seller and give rise to any other remedies available at law or equity.
6. DELIVERY AND DELAY.

6.1 Time is of the essence for this Order. Unless otherwise agreed to in writing, any material commitments or production
arrangements that Seller makes which are in excess of the amount or in advance of the time necessary to meet schedules that are
within lead time shall be at Seller’s risk and cost. Seller bears sole responsibility for managing Seller's raw material, work in process,
and inventory, and Purchaser shall have no liability with respect thereto (whether upon termination of this Order or subcontract) other
than in connection with termination as provided in Section 19, below. Goods shipped to Purchaser in advance of scheduled lead
times may be returned to Seller at Seller’s expense.
6.2 In the event Seller for any reason anticipates any difficulty in complying with the required delivery date or any of the other
requirements of this Order, Seller shall promptly notify Purchaser in writing, and upon request, provide Purchaser adequate
assurance of performance. If Seller does not comply with Purchaser's delivery schedule, Purchaser may require delivery by fastest
method and charges resulting from the premium transportation must be fully prepaid by Seller. Purchaser shall be entitled to recover
damages that it incurs as a result of Seller’s failure to perform as scheduled. Unless expressly stated to the contrary, Purchaser’s
remedies are cumulative and Purchaser shall be entitled to pursue any and all remedies available at law or equity. Further to the
foregoing, Seller shall not make material commitments or production arrangements in excess of the amount or in advance of the time
necessary to meet Purchaser’s delivery schedule. Should Seller enter into such commitments or engage in such production, any
resulting exposure shall be for Seller’s account.
7. PURCHASER'S PROPERTY.
7.1 Purchaser shall retain full title to and ownership of all Purchaser’s property, including but not limited to tools, tool drawings,
equipment, materials, drawings, specifications, as well as materials that include or disclose processes, know-how, procedures,
process parameters, trade secrets, and any other documents, information or data of every description and storage media containing
software or firmware, that is furnished to Seller by Purchaser, or by Purchaser’s Affiliates, subsidiaries or contractors, or paid for in
whole or in part by Purchaser, and any repair or replacement thereof, or any materials affixed or attached thereto (hereinafter,
collectively referred to as “Purchaser’s Property”). Unless otherwise agreed to in writing by Purchaser, Seller shall use Purchaser’s
Property for the sole purpose of rendering services or providing goods to Purchaser. Seller accepts and will use Purchaser’s Property
in “AS IS” and “WHERE IS” Purchaser makes no representations or warranties, express or implied with respect to Purchaser’s
Property, and Purchaser expressly disclaims all warranties, INCLUDING ANY WARRANTY OR MECHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Seller acknowledges that Purchaser has not made and does not hereby make any representations,
warranty, or covenant with respect to the title, merchantability, condition, quality, description, durability, or suitability of Purchaser’s
Property in any respect or in any connection with or for the purposes and uses of Seller. Seller shall not lease, assign, loan or sell
any of Purchaser’s Property or any interest therein, without Purchaser’s prior written consent. Seller shall keep Purchaser’s Property
free and clear of all liens, claims, and encumbrances while in Seller’s possession. Seller shall be solely responsible for the installation
of Purchaser’s Property and for any and all devices necessary for the proper operation and use of Purchaser’s Property, and shall
be responsible for training operators and other as necessary in the proper and safe operation, use, application and maintenance of
Purchaser’s Property. Purchaser expressly disclaims any and all responsibility with respect to such matters. Seller shall be solely
responsible, at its own expense, for proper maintenance and repair of Purchaser’s Property, shall exercise reasonable care and
control in using Purchaser Property, and shall maintain Purchaser’s Property in good order and condition, save normal wear and

Page 5 of 12
tear. Seller agrees to comply with any handling and storage requirements provided by Purchaser for such property. Seller shall insure
that at all times Purchaser’s Property clearly displays signs or markings attached thereto evidencing Purchaser’s ownership of
Purchaser’s Property, and is safely stored separate and apart from Seller's property. Seller shall not dispose of, change or move
Purchaser Property from its stated location or substitute any property for Purchaser's Property without Purchaser’s prior written
approval. Seller shall have exclusive possession of, and control over Purchaser’s Property and Seller shall assume full responsibility
and risk of loss for Purchaser’s Property and its use. Seller shall insure Purchaser’s Property, at Seller’s expense, for (i) replacement
cost with loss payable to Purchaser and (ii) loss or damage by fire, flood and common perils by an insurance company acceptable
to Purchaser. The foregoing shall not be deemed to affect the rights, if any, of the Government in any such property or to grant any
rights to Purchaser in conflict with the FTA provisions set forth in Section 18.6, below.
7.2 Seller hereby agrees that Purchaser may, in its discretion, upon reasonable notice, but without legal process, (i) enter the
premises where Purchaser’s Property may be and take possession thereof, whether at Seller’s premises or its supplier’s, or (ii)
request Seller deliver Purchaser’s Property to a mutually agreed upon location, in which case, Seller shall prepare Purchaser’s
Property for shipment and deliver it as directed by Purchaser, at Seller’s expense, in the same condition as originally received by
Seller, reasonable wear and tear excepted. Unless otherwise instructed by Purchaser in writing, upon completion of performance of
all Order requirements including but not limited to the record retention requirements set forth in Article 21.10, Seller shall return all
Purchaser’s Property to Purchaser at Seller’s expense. The Purchaser may require the Seller to provide a certification of the
destruction of all intangible Purchaser’s Property.
7.3 Purchaser shall have the right, at any reasonable time, to audit all pertinent books and records of Seller, and to inspect
Purchaser’s Property in Seller’s possession, and make reasonable inspections of Seller's facilities to verify compliance with this
Article 7 and with Article 8. Purchaser assumes no responsibility and waives not rights as a result of any such inspection, or its
decision not to conduct an inspection.
7.4 In the event Seller, without Purchaser's prior written consent and authorization, designs or manufacturers for sale to any
person or entity other than Purchaser any goods that are substantially similar to or can replace or repair Purchaser goods or parts,
or obtains governmental approval for such good or repair, the Seller, in any adjudication involving or relating to Purchaser's Property,
shall be required to establish by clear and convincing evidence that neither Seller nor any of its employees, contractors or agents
used in whole or in part, directly or indirectly, any of Purchaser's Property in such design or manufacture or in obtaining governmental
approval with respect to such goods or repair.
8. INTELLECTUAL PROPERTY.
8.1 INTELLECTUAL PROPERTY TREATMENT.
(A) Nothing in this Order shall entitle Purchaser to ownership rights in data, information, discoveries or inventions
made by Seller prior to, or outside of, the scope of this Order. Regarding the rights to any innovations, inventions, drawings, tools,
software or specifications conceived and/or reduced to practice in the course of or performance of this Order or any related purchase
order, Seller assigns and agrees to assign to Purchaser all intellectual property rights thereto, including any intellectual property
rights (including trade secrets, copyrights and patents) issuing thereon (the “Purchaser Rights).
(B) Seller will provide reasonable assistance to Purchaser, at Purchaser’s expense, for securing all such Purchaser
Rights, and will cooperate with Purchaser, its officers and agents, in obtaining, at the expense of Purchaser with respect to the
prosecution thereof, patents on such inventions or discoveries in the name of and for the benefit of Purchaser in any country that
Purchaser may consider desirable. Seller will procure from its employees, without charge to Purchaser, the execution of all patent
applications, assignments and other instruments necessary to the procurement of such patents and to the vesting of title thereto in
Purchaser if such rights do not automatically vest with the Purchaser. Any compensation due Seller's employees shall be paid solely
by Seller.
(C) Purchaser is, or shall become, the sole owner of all notes, reports, memoranda, and any other information
(regardless of the media of expression) made or prepared in connection with any purchase order placed by Purchaser. Seller will not
use a Purchaser part number, or any material developed by Seller under any purchase order placed by Purchaser, without first
obtaining the written consent of Purchaser. All such materials, irrespective of the media of expression, shall be deemed works-for-
hire and shall belong exclusively to Purchaser. If by operation of law any of the material is not work-for-hire, then Seller agrees to
assign, and hereby assigns, to Purchaser the ownership of such material including all copyrights thereto. Purchaser may obtain and
hold in its own name copyrights, registrations, and other protection that may be available in such material, and Seller shall provide
any assistance required to perfect such protection.
(D) Purchaser hereby grants Seller a limited, revocable, non-exclusive, non-transferable, non-assignable, non-
sublicensable (except as may be provided explicitly in this paragraph) limited personal license to use Purchaser Rights and/or
Purchaser’s Property solely for performing this Order for Purchaser. Purchaser’s Property and Purchaser Rights shall not be used
for any other purpose, or disclosed to others or reproduced for any purpose, including, but not limited to, the design, manufacture or
repair of parts or to obtain government approval to do so; provided; however, Seller may provide Purchaser’s Property, and
sublicense Purchaser Rights, to Seller's subcontractors for the sole purpose of enabling Seller's subcontractors to assist Seller in
performing this Order for Purchaser and on condition that Seller's subcontractors agree in writing for Purchaser's benefit to the terms
of this agreement relating to Purchaser Rights and to Purchaser’s Property including Articles 7, 8, 10 and 21.4 hereof. This license
is terminable with or without cause by Purchaser at any time.
(E) All Purchaser’s Property and Purchaser Rights are or shall be deemed to be confidential and proprietary property
to Purchaser, whether or not it is marked with any restrictive legend. At Purchaser’s request, Seller agrees to mark such Goods with
any patent numbers, copyright or trademark status, or other markings designated by Purchaser.

Page 6 of 12
(F) If this Order relates to rights in any computer program or compilation of data that is fixed in any tangible medium
of expression, or any storage medium from which the program may be perceived, reproduced or otherwise communicated, either
directly or with the aid of a machine or device which are necessary for operation of the goods and/or embedded in and delivered as
an integral part of the goods, and/or related documentation (collectively, “Software”), that is not Purchaser Property or Purchaser’s
Rights (both as defined herein), Seller grants to Purchaser, its customers, third party contractors and all other users a non-exclusive,
worldwide, perpetual, irrevocable, transferable, royalty free right to use, load, install, execute, demonstrate, market, test, resell,
sublicense and distribute the Software (the “Required License”). If such Software or any part thereof is owned by a third party, prior
to delivery, Seller shall obtain the Required License from such third-party owner. If Seller provides Software under this Order which
requires Purchaser or the user to “Accept” various terms and conditions, including, but not limited to, “click-wrap,” “click-through,”
browse-wrap,” or “shrink-wrap”, such terms and conditions will be of no force and effect even though they are “accepted” by Purchaser
or the user in order to access or use the Software. The relationship of the parties is solely governed by the terms of this Order. In
addition, upon Purchaser’s request, Seller, at Seller’s expense (including ongoing maintenance fees), will deposit in escrow all
material relating to the Software (including a copy of the object code, source code, data, documentation and all annotations thereto)
with an escrow agent designated by Purchaser and under a written escrow agreement approved in writing by Purchaser.
(G) Data Rights. Seller agrees that Purchaser, its customers, third party contractors and all other users may access,
receive, collect, transmit, maintain, prepare derivatives from, and otherwise use information about Seller’s goods and/or services,
including, without limitation, machine, technical, systems, usage and related information (“Source Data”) to facilitate the provision of
products and services, and to verify compliance with the terms of this Order. Purchaser, its customers, third party contractors and all
other users also has the right to use the Source Data for research, development and continuous improvement of its products, software
and services. Purchaser will own all data, concepts, products, services, software, intellectual property and other rights arising from
and/or related to Purchaser’s use, analysis, research and/or development of the Source Data.
(H) If the work being done hereunder is pursuant to a contract with a governmental entity that contains provisions
regarding retention of intellectual property rights of the Seller, Seller shall retain ownership of inventions and Seller hereby grants
and agrees to grant to Purchaser an irrevocable, fully paid, perpetual license for all such intellectual property rights, and with the right
to extend such license to Purchaser's customers, licensees, co-producers, Affiliates and subsidiaries.
(I) Seller agrees that it will cause its employees to execute contracts of employment or other agreements assuring
the Seller’s ability to comply fully with the provisions of this Section 8.1.
8.2 INTELLECTUAL PROPERTY INDEMNITY. Seller warrants that any goods and/or services furnished under this
Order shall be free of any rightful claim of any third party for infringement of any patent or copyright. Seller shall indemnify and save
Purchaser, and Purchaser’s subsidiaries and Affiliates, and their respective vendors and customers, harmless from and against any
expense or liability, including costs, fees and all damages, arising out of any claim, suit or proceeding that the manufacture or
furnishing of goods and/or services under this purchase order, or the use of such goods and/or services or sales of such goods
and/or services constitutes infringement of any patent or copyright, alleged infringement of any patent or copyright, or
misappropriation of trade secret. If an alleged claim of infringement or misappropriation is made, Seller shall procure for Purchaser,
and Purchaser’s customers, the rights to continue using the goods and/or services, modify them in a manner acceptable to Purchaser
to remove the claim, or with the written approval of Purchaser, replace the goods and/or services with a non-infringing one or remove
the goods and/or services and refund the purchase price. The forgoing provisions apply to all goods and/or services provided by the
Seller to the Purchaser.
9. CHANGES.
9.1 Purchaser reserves the right at any time to make changes within the general scope of this Order. Such changes may
include: (A) drawings, designs or specifications; (B) technical clarifications; (C) artwork; (D) quantity; (E) method of shipment or
packing; (F) quality; (G) place or time of delivery; or (H) amount of Purchaser’s furnished property. In addition, Purchaser may at any
time, by notice to Seller, change the place or time of delivery. Upon Purchaser’s request, Seller shall promptly deliver to Purchaser
copies of outstanding purchase orders and subcontracts for materials, equipment and/or services for the work and take such action
relative to such purchase orders and subcontracts as Purchaser may direct.
9.2 If any change causes a significant impact on the cost of, or the time required for, performance of any work under this Order,
an equitable adjustment shall be made in the price or delivery schedule, or both as applicable, in writing; provided, however, the
maximum liability of the Purchaser for obsolescence, scrappage, and/or rework resulting from any change shall be limited to the
value of the materials and parts in process at the time of the change. Notwithstanding anything to the contrary contained herein,
Purchaser shall have no liability for lost profit or cost of obsolescence, scrap, rework of materials and parts which Seller has released
for manufacture in advance of Seller's normal manufacturing cycle required to meet the schedule. Any Seller claim for adjustment
under this section shall be deemed waived unless asserted in writing within twenty (20) days after receipt by Seller of the notice to
make the change and may only include reasonable, direct costs that will necessarily be incurred as a direct result of the change.
9.3 No departure shall be made by Seller from Purchaser’s specifications, nor any change made in materials, sources of supply,
or design, manufacturing or assembly processes. Any change(s) to the specifications requested by Seller must be in writing and
is(are) subject to the receipt of written approval from Purchaser’s Engineering department, to be issued at Purchaser’s sole discretion.
Seller must request and receive approval from Purchaser of any proposed changes in writing. Failure to do so could result in penalties
and or termination of purchase order for default. In the event Seller desires to transfer any work under this Order to another site or
make any material modification in its manufacturing process or the procurement of materials related to the goods, it shall first consult
with and obtain the prior written consent of Purchaser, which consent shall not be unreasonably withheld. Such consent by Purchaser
shall be subject to qualification of the new site under Purchaser’s supplier qualification standards. Purchaser reserves sole right to
accept or reject such changes.

Page 7 of 12
9.4 Nothing in this section, including any disagreement with Purchaser as to the equitable adjustment to be made, shall excuse
Seller from proceeding with the Order as changed.
10. WARRANTIES.
10.1 Seller warrants that all goods and services provided pursuant to this Order, whether provided by Seller or a direct or indirect
supplier of Seller, will be free of any claims of any nature, including without limitation title claims, and will cause any lien or
encumbrance asserted to be discharged, at its sole cost and expense, within thirty (30) days of its assertion (provided such liens do
not arise out of Purchaser’s failure to pay amounts not in dispute under this Order or an act or omission of Purchaser). Seller warrants
and represents that all such goods and services will be new and of merchantable quality, not used, rebuilt or made of refurbished
material unless approved in writing by Purchaser, free from all defects in design, workmanship and material and will be fit for the
particular purpose for which they are intended. Such goods and services will be provided in strict accordance with all specifications,
samples, drawings, designs, descriptions or other requirements approved or adopted by Purchaser. Seller further warrants that all
services will be performed in accordance with the standards of care and diligence normally practiced by persons performing similar
services and in the best workmanlike manner. Any review or approval of drawings by Purchaser will be for Seller's convenience and
will not relieve Seller of its responsibility to meet all requirements of this Order. Any attempt by Seller to limit, disclaim or restrict any
such warranties or remedies by acknowledgment or otherwise shall be null, void and ineffective. The warranties shall apply to
Purchaser, its successors, assigns and the users of goods and services covered by this Order.
10.2 The warranties set forth in section 10.1 only shall apply for a period of forty-eight (48) months, plus delays (such as those
due to non-conforming goods and services), from the date of Seller’s delivery of all goods to destination/performance of the services.
The 48-month limitation contained in this Section 10.2 does not supersede or otherwise alter or limit any performance and/or reliability
requirements set forth in the specifications or other documents governing this Order.
10.3 If any of the goods and/or services are found to be defective or otherwise not in conformity with the warranties in this section
during the warranty period, then, Purchaser, in addition to any other rights, remedies and choices it may have by law, contract or at
equity, and in addition to seeking recovery of any and all damages and costs emanating therefrom, at its option and sole disc retion
and at Seller’s expense may: (A) require Seller to inspect, remove, reinstall, ship and repair or replace/re-perform nonconforming
goods and/or services with goods and/or services that conform to all requirements of this Order; (B) take such actions as may be
required to cure all defects and/or bring the goods and/or services into conformity with all requirements of this Order, in which event
all related costs and expenses (including, but not limited to, material, labor and handling costs and any required re-performance of
value added machining or other service) and other reasonable charges shall be for Seller's account; and/or (C) reject and return all
or any portion of such goods and/or services. Any repaired or replaced good, or part thereof, or re-performed services shall carry
warranties on the same terms as set forth above, with the warranty period being the greater of the original unexpired warranty or
twenty-four (24) months after repair or replacement.
10.4 Purchaser’s failure to inspect, accept, reject or detect defects by inspection shall neither relieve Seller from responsibility
for such goods or services that are not in accordance with the Order requirements nor impose liabilities on Purchaser. Purchaser’s
validation, approval or conditional approval of the products shall not relieve Seller from responsibility, liability or waive the warranties
set forth in this Section 10.
10.5 If at any time a governmental agency of any country, state, province or municipality requires Purchaser to conduct a product
safety recall or a field modification/fix program, or Purchaser voluntarily undertakes such an action, related to the Products, Purchaser
will notify Seller of any such action and Seller shall, at Purchaser’s option, either repair or replace the related Products, and reimburse
Purchaser for any costs, expenses or damages.
11. INDEMNITY AND INSURANCE.

11.1 INDEMNITY. Seller will fully defend, indemnify, hold harmless and reimburse Buyer, its officers, directors, shareholders,
Affiliates, subsidiaries, employees, agents, customers and assigns from and against all claims, suits, actions, proceedings, damages,
losses and expenses, including attorneys’ fees, arising out of, related to, or resulting from: (A) any breach of any representation,
warranty, certification, covenant or agreement made by Seller; (B) any negligence or willful misconduct of Seller or its agents or
subcontractors in connection with performance; (C) any litigation, proceeding or claim relating to the obligations of Seller; (D) any
violation of law by Seller, its employees, agents, Affiliates, contractors or subcontractors and (E) Seller’s use, control, ownership, or
operation of its business and facilities, except to the extent caused by the negligence of Buyer. Seller agrees to include this
indemnification provision in any subcontracts issued hereunder. Seller shall not enter into any settlement without Purchaser’s prior
written consent.
11.2 INSURANCE. In support of Seller’s indemnity and contractual obligations, for the duration of this Order and until expiration
of Seller’s warranties hereunder, Seller shall, at its own cost and expense, obtain and maintain through a reputable primary insurance
company, acceptable to Purchaser, licensed in the jurisdiction where goods are manufactured and/or sold and where services are
performed, adequate insurance to cover it obligations under this Order or as required by law, including, as necessary: (A)
Comprehensive General Liability in the minimum amount of $5,000,000 combined single limit per occurrence with coverage for (i)
bodily injury/property damage, including coverage for contractual liability insuring the liabilities assumed in this Order, (ii) products
liability/completed operations liability, and (iii) all the following types of coverages where applicable: (1) contractors protective liability,
(2) collapse or structural injury, and (3) damage to underground utilities; (B) Business Automobile Liability Insurance covering
Comprehensive Automobile Liability covering bodily injury/property damage and all owned, hired and non-owned automotive
equipment used in the performance of the Order in the amount of $2,000,000 combined single limit each occurrence; (C) Employers’
Liability in the amount of $1,000,000 each occurrence; (D) Property Insurance covering the full replacement cost value of all goods
and services owned, rented or leased by Seller in connection with this Order and covering damage to property in Seller’s care,

Page 8 of 12
custody and control; and (E) Professional Liability Insurance in the amount of $3,000,000 per occurrence; and (F) appropriate
Workers’ Compensation Insurance protecting Seller from all claims under any applicable Workers’ Compensation and Occupational
Disease Act. Coverage similar to Workers’ Compensation and Employers’ Liability shall be obtained for each local employee outside
the United States where work in connection with this Order is performed.
Purchaser shall be named as additional insured under Seller’s Comprehensive General Liability policy for any and all purposes
arising out of or connected to this Order. Seller shall furnish Purchaser an endorsement showing that Purchaser has been named an
additional insured and a certificate of insurance completed by its insurance carrier(s) certifying that insurance coverages are in effect.
Seller hereby waives subrogation. All insurance specified in this section shall contain a waiver of subrogation in favor of Purchaser,
its Affiliates and their respective employees for all losses and damages covered by the insurances required in this section, including
coverage for damage to Purchaser’s property in Seller’s care, custody or control. Seller shall notify Purchaser of any material
modification, cancellation or lapse during the term of this Order by giving thirty (30) days’ advance written notice to Purchaser.
12. SELLER'S EMPLOYEES

12.1 Seller's personnel performing services under this Order shall remain employees of Seller subject to its right of direction,
control and discipline and shall neither become employees of Purchaser nor be entitled to any rights, benefits or privileges of
Purchaser employees. As appropriate, Purchaser shall give direction as to the ultimate objective of the project to the Seller. The
Seller shall ensure that its personnel adhere to the terms and policies in this Order and that they have the requisite knowledge,
training and ability to perform work under this Order competently and in accordance with applicable laws and regulations.
12.2 Seller's employees are not authorized to enter into any agreements or to make any commitments financial or otherwise on
behalf of Purchaser.
13. WORK ON PURCHASER'S OR ITS CUSTOMER'S PREMISES OR SYSTEMS.

13.1 If Seller's work under this Order involves operations by Seller on the premises of Purchaser or Purchaser’s customer or
access to Purchaser’s systems or its computers, then:
(A) Seller shall comply with all of Purchaser's safety and security procedures and shall take all necessary precautions to
prevent the occurrence of any injury to person or property during the progress of such work.
(B) Seller represents and warrants that all of its employees who will perform work under this Order on Purchaser’s or its
customer’s premises have been tested and are free from illegal drugs. The term “illegal drugs” does not include the use of a controlled
substance pursuant to a valid prescription. The prescription medication must not prevent the employee from performing competent
and safe work.
OR (to be used in circumstances where Seller does not have the right to conduct routine drug testing):
(B) Seller represents and warrants that it will use reasonable endeavors to ensure that all of its employees who will perform
work under this Order on Purchaser’s or its customer’s premises are free from illegal drugs. In the event Seller has reason to suspect
that any employee performing work under this Order on Purchaser’s or its customer’s premises, Seller agrees to take immediate
steps to remove such employee from Purchaser’s or its customer’s premises and procure that the employee does not continue to
perform work under this Order. The term “illegal drugs” does not include the use of a controlled substance pursuant to a valid
prescription. The prescription medication must not prevent the employee from performing competent and safe work.
(C) To the extent permissible by law, Seller represents and warrants that it will conduct a criminal conviction records
investigation of any employee before they are assigned to work on any order that requires that employee to enter Purchaser’s or its
customer’s premises.
13.2 Seller shall include this provision in any subcontract placed pursuant to this Order where the subcontractor will perform work
on Purchaser’s or its customer’s premises.
13.3 Purchaser reserves the right to deny access to or expel from its or its customer’s premises and/or systems in Purchaser's
sole discretion any person for any reason including but not limited to those who fail to adhere to these referenced procedures or
appear on government-issued lists (i.e. the Department of State list of terrorists, suspects, etc., Arms Export Control Debarment List;
Department of State, Proliferation List; Department of Commerce, Denied Parties List; and Department of Treasury, Specially
Designated National List).
14. AUDIT AND INSPECTION. Seller shall permit Purchaser or its representatives to have reasonable access to the site(s)
where work under this Order is performed to assess Seller’s compliance with its representations and warranties in order to assess
Seller’s work quality, conformance with Purchaser’s specifications and compliance with this Order. Upon reasonable notice by
Purchaser, all: (A) goods, materials and services related in any way to the goods and services purchased hereunder (including
without limitation raw materials, components, products, intermediate assemblies, work in process, tools and end products) shall be
subject to inspection and test by Purchaser and its customer or representative at all times and places, including sites where the
goods and services are created or performed, whether they are at premises of Seller, Seller’s suppliers or elsewhere; and (B) Seller’s
books and records relating to this Order shall be subject to audit and inspection by Purchaser.
14.1 If any inspection, test, audit or similar oversight activity is made on Seller’s or its suppliers’ premises, Seller shall, without
additional charge: (A) provide all reasonable access and assistance for the safety and convenience of the inspectors and (B) take all

Page 9 of 12
necessary precautions and implement appropriate safety procedures for the safety of Purchaser's personnel while they are present
on such premises.
14.2 Seller shall provide and maintain an inspection, testing and process control system acceptable to Purchaser and its
customer covering the goods and services to ensure compliance with this Order and shall keep complete records available to
Purchaser and its customer for three (3) years after completion of this Order. Neither inspection, nor failure to inspect, shall relieve
Seller of its responsibilities or warranties with respect to the product or imply acceptance thereof. Acceptance of such product by
Purchaser shall not alter the obligations and liability of Seller under this Order.
15. PARTS COMPLIANCE AND MATERIALS TEST CERTIFICATION:

15.1 By acceptance of this Order, Seller certifies that goods supplied shall conform to all requirements of this Order, including
referenced specifications in effect as of the date of purchase order placement or as modified pursuant to Section 9, and that Objective
Evidence of conformance and specifications required by this Order is on file and available for examination by Purchaser. For the
purposes of this section, “Objective Evidence” shall mean any statement of fact pertaining to the quality of a good or service based
on observations, measurements or tests that can be fully verified. Evidence must be expressed in terms of specific quality
requirements or characteristics. These characteristics are identified in drawings, specifications, and other documents which describe
the item, process, or procedure.
15.2 The Seller shall comply with the Purchaser’s deviation process using the Supplier Collaboration Portal. The Seller shall
submit an on-line deviation request and receive Purchaser’s written approval prior to shipping any part that does not meet the
Purchaser specifications or requirements.
15.3 Seller shall conform to Purchaser’s Discrepant Material Report (“DMR”) and Nonconforming Material Returns (“NCMR”)
processes. In addition to any other remedies Purchaser may have, the Purchaser shall have the right charge the Seller $200, per
occurrence, for any part found defective via DMR or NCMR where the Seller is at fault to cover the processing costs of the DMR or
NCMR for the Purchaser. If the Seller has three (3) DMRs or NCMRs written against the same part within six (6) months, then the
Purchaser shall charge an additional fee of $1,000 or 25% of the cost (whichever is less) of the defective quantity of the part as a
recovery against manufacturing impacts to the Purchaser.
15.4 Seller shall comply with all requirements of the Purchaser's component/supplier validation process before production parts
can be shipped to Purchaser. Seller shall provide written notice to Purchaser in the event it is unable to achieve all of the requirements
of the validation process prior to shipment. Upon receipt of such notification by Seller, Purchaser may refuse receipt of any products
delivered to Purchaser that have not met all of the validation requirements. Seller shall notify Purchaser and adhere to
component/supplier validation process if any changes in part parameters, processes used to produce parts, or facilities changes
occur throughout Seller's supply chain. Seller shall provide on-going part verification data in accordance with Purchaser's
component/supplier validation process including real-time data for any characteristics identified as Critical To Quality characteristics
(CTQs). Data for CTQs shall be provided via Purchaser's electronic systems. Seller shall perform timely failure analysis and
implement corrective actions for products found to be defective from Purchaser. Any review or approval by Purchaser regarding the
validation process will be for Seller's convenience and will not relieve Seller of its responsibility to meet all requirements of this Order.
16. CONFIDENTIALITY.
16.1 Seller shall keep confidential any: (A) oral information, whether or not reduced to writing and marked with a restrictive
legend, information that is marked or identified as “Confidential”, “Restricted” or with a similar designation, or if not so designated,
that the Seller should reasonably expect to be confidential due to its nature; (B) technical, process, proprietary or economic
information derived from drawings or 3D or other models owned or provided by Purchaser; and (C) other tangible or intangible
property furnished by Purchaser in connection with this Order, including any drawings, specifications, data, goods and/or information
(the “Confidential Information”). Seller shall not disclose, directly or indirectly, the Confidential Information to any third party or use
the Confidential Information for the benefit of any third party without Purchaser’s consent. Seller shall protect the Confidential
Information against unauthorized use or disclosure using at least those measures that it takes to protect its own Confidential
Information of a similar nature, but in no case, less than reasonable care. In the event that Seller is required by applicable law or
regulation to disclose Confidential Information, Seller shall provide Purchaser with prompt notice thereof and a reasonable opportunity
to comment or undertake protective measures prior to such disclosure. Confidential Information shall also include any notes,
summaries, reports, analyses or other material derived by Seller in whole or in part from the Confidential Information in whatever
form maintained (collectively, “Notes”). Except as required for the efficient performance of this Order, Seller shall not use or permit
copies to be made of the Confidential Information without Purchaser’s prior written consent. If any such reproduction is made with
prior written consent, notice referring to the foregoing requirements shall be provided thereon.
16.2 The restrictions set forth in Section 16.1 shall be inoperative as to particular portions of the Confidential Information disclosed
by Purchaser to Seller if such information: (A) is or becomes generally available to the public other than as a result of disclosure by
Seller; (B) was available on a non-confidential basis prior to its disclosure to Seller; (C) is or becomes available to Seller on a non-
confidential basis from a source other than Purchaser when such source is not, to the best of Seller’s knowledge, subject to a
confidentiality obligation with Purchaser, or (D) was independently developed by Seller, without reference to the Confidential
Information, and Seller can verify the development of such information by written documentation. Upon completion or termination of
this Order, Seller shall promptly return to Purchaser all Confidential Information, including any copies thereof, and shall destroy (with
such destruction certified in writing by Seller) all Notes and any copies thereof.
16.3 Any knowledge or information, which Seller shall have disclosed or may hereafter disclose to Purchaser and which in any
way relates to the goods or services purchased under this Order (except to the extent deemed to be Purchaser’s property as set
forth in Section 7), shall not be deemed to be confidential or proprietary and shall be acquired by Purchaser free from any restrictions

Page 10 of 12
(other than a claim for infringement) as part of the consideration for this Order, and notwithstanding any copyright or other notice
thereon, Purchaser shall have the right to use, copy, modify and disclose the same as it sees fit.
17. SECURITY AND CRISIS MANAGEMENT REQUIREMENTS. Seller will (1) develop and implement security procedures
("Security Improvement Plan") in accordance with (A) the recommendations of the United States Customs Service under the
provisions of the Customs-Trade Partnership Against Terrorism ("C-TPAT") for Seller’s type of business, (B) the requirements or
recommendations of the EU Authorized Economic Operator ("AEO") program, and (C) any other governmental program for protection
of international supply chains; and (2) upon request of Purchaser, provide a written copy of the Security Improvement Plan.
18. COMPLIANCE WITH LAWS.

18.1 GENERAL. Seller represents, warrants, certifies and covenants (collectively “Covenants”) that it and the products will
comply with all laws applicable to the products, services and/or the activities contemplated or provided under this Order, including,
but not limited to, any national, international, federal, state, provincial or local law, treaty, convention, protocol, common law,
regulation, directive, code, standard, ordinance, order (including judicial order), or rule and regulation issued by governmental
agencies or authorities, including, but not limited to, those dealing with environment, health, safety, employment, record retention,
personal data protection, or the transportation or storage of hazardous materials. Seller shall also comply with good industry
practices, including the exercise of that degree of skill, diligence, prudence and foresight which can reasonably be expected from a
competent seller who is engaged in the same type of service or manufacture under similar circumstances. Seller shall, at Purchaser’s
request, provide certificates relating to any applicable legal requirements or to update any and all of the Covenants under this Order
in form and substance satisfactory to Purchaser.
18.2 ENVIRONMENT, HEALTH AND SAFETY.
(A) Seller Covenants that it will take the necessary and appropriate actions and precautions to protect health, safety and the
environment, including to prevent any injury to persons, property and/or the environment, and has established effective requirements
to ensure any members of the Seller, and any suppliers it uses to perform the work called for under this Order, will be in compliance
with Section 18 of this Order.
(B) When Seller ships goods to Purchaser, Seller shall provide with the goods in the language(s) of the locations where the
goods are delivered to Purchaser or its designee: (1) safe use instructions; (2) hazard communication, safe transport and labeling
information; (3) regulatory, compliance and certification documentation; and (4) for chemical substances and mixtures, safety data
sheets (MSDS/SDS) in all readily available languages.
(C) Seller Covenants that any goods Seller provides to Purchaser comply with all laws governing the management, handling,
shipping, import, export, notification, registration or authorization of chemical substances such as the Montreal Protocol, the
Stockholm Convention on Persistent Organic Pollutants, the US Toxic Substances Control Act, the European Union’s Restrictions
on Hazardous Substances and REACH legislation, and other comparable chemical regulations (collectively “Chemicals Legislation”);
and can be used as contemplated by Purchaser in full compliance with the Chemicals Legislation.
(C) Unless Purchaser has expressly agreed otherwise in writing, Seller covenants that the goods do not contain (1) any chemicals
that are restricted or otherwise banned under Chemicals Legislation; or (2) lead or lead compounds, mercury or mercury compounds,
cadmium or cadmium compounds, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE),
arsenic, asbestos, benzene, tetrachloroethylene, methyl chloroform, polychlorinated biphenyls (PCBs), carbon tetrachloride, cyanide,
beryllium, or radioactive materials. Seller shall notify Purchaser in writing of the presence of any engineered nanoscale material in
the goods or used in Seller’s operations.
18.3 ANTI-DUMPING. Seller Covenants that all sales made hereunder are made in circumstances that will not give rise to the
imposition of new anti-dumping or countervailing duties under United States law (19 U.S.C. Sec. 1671 et seq.), European Union
(Council Regulation (EC) No. 384/96 of December 22, 1995, Commission Decision No. 2277/96/ECSC of November 28, 1996, as
amended), similar laws in such jurisdictions or the laws of any other country to which the goods may be exported. To the full extent
permitted by law, Seller will indemnify, defend and hold Purchaser harmless from and against any costs, fines, penalties, charges or
expenses (including any countervailing duties which may be imposed and, to the extent permitted by law, any preliminary dumping
duties that may be imposed) arising out of or in connection with any breach of this Section. In the event that countervailing or anti-
dumping duties are imposed that cannot be readily recovered from Seller, Purchaser may, at its option, immediately terminate this
Order with no further liability of any nature whatsoever to Seller hereunder. In the event that any jurisdiction imposes punitive or other
additional tariffs on goods subject to this Order in connection with a trade dispute or as a remedy in an “escape clause” action or for
any other reason, Purchaser may, at its option, immediately terminate this Order with no further liability of any nature whatsoever to
Seller hereunder.
18.4 IMPORTER OF RECORD AND DRAWBACK. If goods are to be delivered DDP (Incoterms 2010 Edition) to the destination
country, Seller agrees that Purchaser will not be a party to the importation of the goods, that the transaction(s) represented by this
Order will be consummated after importation and that Seller will neither cause nor permit Purchaser's name to be shown as "importer
of record" on any customs declaration. Seller also confirms that it has non-resident importation rights, if necessary, into the destination
country with knowledge of the necessary import laws. If Seller is the importer of record into the United States for any goods, including
any component parts thereof, associated with this Order, Seller shall provide Purchaser required documentation for duty drawback
purposes which includes, but is not limited to, Customs Form 7552 entitled "Certificate of Delivery" properly executed as well as
Customs Form 7501 "Entry Summary" and a copy of Seller’s Invoice. Seller shall accurately indicate the country of origin of the goods
sold hereunder on the customs/commercial invoice and other applicable documentation. When requested by Purchaser, Seller shall
execute such documents as may be necessary to allow Purchaser to claim duty preference under any and all applicable

Page 11 of 12
programs. Seller shall promptly notify Purchaser of any known documentation errors and/or changes to the origin of goods. Seller
shall indemnify, defend and hold Purchaser harmless from and against any costs, fines, penalties, charges or expenses arising out
of or in connection with Seller’s inaccurate documentation or untimely cooperation under this Section.
18.5 INTERNATIONAL TRADE CONTROLS. All transactions hereunder shall at all times be subject to and conditioned upon
Seller’s compliance with all applicable export control laws and regulations and any amendments thereto. Seller hereby agrees that it
shall not, except as any applicable laws and regulations may expressly permit, make any disposition by way of transshipment, re-
export, diversion or otherwise, of any goods, technical data, or software, or the direct product thereof, furnished by Purchaser in
connection with this Order. The obligations to comply with all applicable export control laws and regulations shall survive any
termination or discharge of any other contract obligations.
18.6 SUBCONTRACT FLOWDOWN TERMS FOR US GOVERNMENT CONTRACTS. Where the goods and/or services being
procured by Purchaser from Seller are in support of a U.S. Government end customer or an end customer funded in whole or part
by the U.S. Government, Seller shall comply with the US Government flowdown terms and conditions located at
https://www.wabteccorp.com/supplier-resources which terms and conditions are incorporated herein by reference. The version of the
terms and conditions shall be those that are in effect as of the date of this Order.
18.7 PROHIBITED GOODS AND SERVICES: The United States of America prohibits the importation of goods or the purchase
of services from certain countries. No goods or services from prohibited countries may be used directly or indirectly in the design,
manufacture, test, or other methods of providing any of the items (whether goods, services, or otherwise) covered by this Order. The
list of prohibited countries can change from time to time and it is Seller's responsibility to ensure compliance with such list at all times.
Current information can be obtained by accessing the internet at URL http://www.treas.gov/ofac/.
18.8 PROPER BUSINESS PRACTICES. Seller acknowledges that it has carefully reviewed and understands the Purchaser’s
Integrity Guide for Suppliers, Contractors and Consultants (as amended from time to time, the “Guide”), a copy of which can be found
at https://www.wabteccorp.com/supplier-resources. Seller covenants (i) to fully comply with the Guide and all laws concerning
improper or illegal payments and gifts or gratuities; and (ii) to not pay, promise to pay or authorize the payment of any money or
anything of value, directly or indirectly, to any person for the purpose of illegally or improperly inducing a decision or obtaining or
retaining business in connection with this Order.
19. TERMINATION AND SUSPENSION.

19.1 TERMINATION FOR CONVENIENCE. Purchaser may terminate all or any part of this Order at any time by written notice
to Seller. Upon termination (other than due to Seller's insolvency or default including failure to comply with this Order), Purchaser
and Seller shall negotiate reasonable termination costs consistent with costs allowable under Section 9 “Changes” and identified by
Seller within thirty (30) days of Purchaser’s termination notice to Seller, unless the parties have agreed to a termination schedule in
writing. Any costs identified by Seller after the thirty (30) days period set forth above shall be waived by Seller. Buyer shall have the
right to terminate at no cost all Orders with delivery lead times of sixty (60) calendar days or longer by providing written notice within
fourteen (14) calendar days of Seller’s final Order acceptance.
19.2 TERMINATION FOR DEFAULT. Purchaser, without liability, may by written notice of default, terminate the whole or any
part of this Order if Seller: (A) fails to perform within the time specified or in any written extension granted by Purchaser; (B) fails to
make progress which, in Purchaser’s reasonable judgment, endangers performance of this Order in accordance with its terms; or
(C) fails to comply with any of the terms of this Order. Such termination shall become effective if Seller does not cure such failure
within ten (10) days of receiving notice of default. Upon termination, Purchaser may procure at Seller’s expense and upon terms it
deems appropriate, goods or services similar to those so terminated. Seller shall continue performance of this Order to the extent
not terminated and shall be liable to Purchaser for any excess costs for such similar goods or services. As an alternate remedy and
in lieu of termination for default, Purchaser, at its sole discretion, may elect to extend the delivery schedule and/or waive other
deficiencies in Seller's performance, making Seller liable for any costs, expenses or damages arising from any failure of Seller’s
performance. Purchaser’s rights and remedies in this clause are in addition to any other rights and remedies provided by law, equity
or under this Order. In the event Purchaser wrongfully terminates an Order under this Section 19.2, in whole or in part, such
termination becomes a termination for convenience under Section 19.1, above.
19.3 TERMINATION FOR INSOLVENCY/PROLONGED DELAY. If Seller ceases to conduct its operations in the normal course
of business or fails to meet its obligations as they mature or if any proceeding under the bankruptcy or insolvency laws is brought by
or against Seller, a receiver for Seller is appointed or applied for, an assignment for the benefit of creditors is made or an excused
delay (or the aggregate time of multiple excused delays) lasts more than 60 days, Purchaser may immediately terminate this Order
without liability, except for goods or services completed, delivered and accepted within a reasonable period after termination (which
will be paid for at the Order price).
19.4 OBLIGATIONS ON TERMINATION. Upon expiration or after receipt of a notice of termination for any reason, Seller shall
immediately: (A) stop work as directed in the notice; (B) place no further subcontracts or purchase orders for materials, services or
facilities hereunder, except as necessary to complete the continued portion of this Order; (C) refund to Purchaser any progress
payments or tooling payments, if any, made by Purchaser; (D) terminate all subcontracts to the extent they relate to work terminated;
and (E) deliver to Purchaser all completed work and work in process, including all designs, drawings, specifications, other
documentation and material required or produced in connection with such work and all of Purchaser’s Confidential Information as set
forth in Section 16.
19.5 SUSPENSION. Purchaser may at any time, by notice to Seller, suspend performance of the work for such time as it deems
appropriate. Upon receiving notice of suspension, Seller shall promptly suspend work to the extent specified, properly caring for and
protecting all work in progress and materials, supplies and equipment Seller has on hand for performance. Upon Purchaser’s request,
Seller shall promptly deliver to Buyer copies of outstanding purchase orders and subcontracts for materials, equipment and/or

Page 12 of 12
services for the work and take such action relative to such purchase orders and subcontracts as Purchaser may direct. Purchaser
may at any time withdraw the suspension as to all or part of the suspended work by written notice. Seller shall resume diligent
performance on the specified effective date of withdrawal. All claims for increase or decrease in the cost of or the time required for
the performance of any work caused by suspension shall be pursued pursuant to, and consistent with, Section 9, above.
20. PRIVACY AND DATA PROTECTION; PRODUCT CYBERSECURITY.

20.1 PRIVACY & DATA PROTECTION. Seller agrees that Purchaser’s Confidential Information will be subject to organizational,
technical, and physical controls and other safeguards set out in the “Privacy and Data Protection Appendix” located at the following
link: https://www.wabteccorp.com/supplier-resources. If Seller has access to Purchaser’s Restricted Data, Sensitive Personal
Information, Controlled Data or Purchaser’s Information System as defined in the Privacy and Data Protection Appendix then Seller
agrees to comply and apply such additional safeguards and to grant Purchaser such additional rights as are set forth in the Privacy
and Data Protection Appendix relating to such data.
20.2 PRODUCT CYBERSECURITY. Seller agrees that all goods supplied under this Order that include executable binary code
shall comply with the terms and conditions of the Product Cybersecurity Appendix located at https://www.wabteccorp.com/supplier-
resources.
21. MISCELLANEOUS.
21.1 ENGLISH LANGUAGE. Except as the parties may otherwise agree, this Order, purchase agreements, data, notices,
shipping invoices, correspondence and all other writings shall be in the English language. In the event of any inconsistency between
any terms of this Order and any translation thereof into another language, the English language meaning shall control.
21.2 QUANTITY.
(A) Purchaser is not obligated to purchase any quantity of goods and/or services except for such quantity(ies) as may
be specified either: (1) on the face of an Order; (2) in a “release” on the face of an Order; or (3) on a separate written release issued
by Purchaser pursuant to an Order. The quantity of goods or services, if any, specified in requests for quotation or forecasts supplied
by Purchaser from time to time, or otherwise, is an estimate only. Unless otherwise agreed to in writing by Purchaser, Seller shall
not make material commitments or production arrangements in excess of the quantities specified in Purchaser’s Order or release
and/or in advance of the time necessary to meet Purchaser’s delivery schedule. Should Seller enter into such commitments or engage
in such production, any resulting exposure shall be for Seller’s account. Goods delivered to Purchaser in excess of the quantities
specified in Purchaser’s Order or release and/or in advance of schedule may be returned to Seller at Seller’s risk and expense,
including but not limited to any cost incurred by Purchaser related to storage and handling of such goods. In the event the Supply
Agreement or any other agreement between Purchaser and Seller obligates Purchaser to buy a percentage of its purchased product
requirements from Seller, reasonable amounts of product purchased from a third-party supplier for purposes of qualifying such
products shall be deemed excluded from Purchaser’s requirements and can be used by Purchaser for commercial production and
sale.
(B) Seller shall give Purchaser 180 calendar days’ prior written notice of the permanent discontinuance of production
of any goods purchased hereunder and/or necessary for the production/ provision of goods and/or services hereunder. The foregoing
obligation shall survive termination or expiration of the Order for five calendar years. Additionally, for all goods purchased hereunder,
Seller shall provide replacement parts for a period of five years after production by Seller of such goods ceases. Seller shall continue
to supply such replacement parts past the five year if Purchaser orders at least 20 replacements parts per year during such five-year
period. The prices for any replacement parts purchased in the first 2 years of the five-year period shall not exceed those prices in
effect at the time production of the relevant goods cease. Thereafter, the prices for replacement parts shall be negotiated based upon
Seller’s actual cost of production of such replacement parts plus any special packaging costs. After the end of the above five- year
period, Seller shall continue to maintain in good working condition all Seller-owned tooling required to product the goods and/or
replacement parts, and shall not dispose of or sell such tooling without first contacting Purchaser and offering Purchaser the right to
purchase such tooling. Seller’s obligations with regard to any Purchaser owned tooling are set forth in Section 7, above. No minimum
order requirements for replacement parts shall apply unless the parties mutually agree in advance and expressly in writing. All
replacement parts purchased by Purchaser shall be subject to the terms of this Order.
21.3 WAIVER, MODIFICATION AND SEVERABILITY. Unless expressly set forth herein to the contrary, any failure or delay in
the exercise of rights or remedies under this Order will not operate to waive or impair such rights or remedies. Any waiver given will
not be construed to require future or further waivers. Unless expressly set forth herein to the contrary, no waiver, alteration or
modification of any of the provisions of this Order shall be binding upon either party unless made in writing signed by the aggrieved
party. The invalidity, in whole or in part, of any of the foregoing sections or paragraphs of this Order shall not affect the remainder of
such sections or paragraphs or any other section or paragraph of this Order, which shall continue in full force and effect. Further, the
parties agree to give any such section or provision deemed invalid, in whole or in part, a lawful interpretation that most closely reflects
the original intention of Purchaser and Seller.
21.4 SECURITY INTEREST. In the event items will be bailed to Seller or progress payments will be made, Seller hereby grants
Purchaser a security interest in equipment, machinery, contract rights, inventory, goods, merchandise and raw materials, whether
now existing or hereafter arising, and any replacements, improvements, substitutions, attachments, accessories and accessions
thereto or thereon provided by Purchaser or purchased by Seller with progress payments or advances made by Purchaser and to be
used by Seller in manufacturing goods ordered by Purchaser under this Order. Seller agrees to execute and deliver all documents
requested by Purchaser to protect and maintain Purchaser's security interest.
21.5 RELEASE OF INFORMATION/PUBLICITY. Seller shall not make any announcement, take or release any photographs
(except for its internal operation purposes for the manufacture and assembly of the goods), or release any information concerning

Page 13 of 12
this Order or any part thereof or with respect to its business relationship with Purchaser, to any third party, member of the public,
press, business entity, or any official body except as required by applicable law, rule, injunction or administrative order without
Purchaser’s prior written consent.
21.6 REMEDIES. Unless expressly indicated otherwise, any right or remedy of Purchaser set forth in this Order shall not be
exclusive, and, in addition thereto, Purchaser shall have all rights and remedies under applicable law, including, without limitation,
injunctive and/or equitable relief.
21.7 OFFSET AND COUNTERTRADE CREDIT VALUE REQUIREMENTS. All offset or countertrade credit value resulting from
this Order shall accrue solely to the benefit of Purchaser. Seller agrees to cooperate with Purchaser in the fulfillment of any foreign
offset/countertrade obligations.
21.8 RECORD RETENTION REQUIREMENTS. Seller shall maintain, for eight (8) years from the date of final payment under
this Order or subcontract, purchase order files for supplies, equipment, material, or services including supporting related
documentation, records and back-up files including, but not limited to, invoices and memoranda (e.g., memoranda of negotiations
showing the principal elements of price negotiations), product acceptance and quality records, including inspection records, material
certifications, and acceptance test records.
21.9 MISCELLANEOUS. (A) This Order, with documents as are expressly incorporated by reference, is intended as a complete,
exclusive and final expression of the parties’ agreement with respect to the subject matter hereof and supersedes any prior or
contemporaneous agreements, whether written or oral, between the parties; (B) The parties represent that they are not relying upon
any representations, understandings or agreements, written or oral, which are not included herein in making their respective decisions
to execute this Order; (C) No course of prior dealings and no usage of the trade shall be relevant to determine the meaning of this
Order even though the accepting or acquiescing party has knowledge of the performance and opportunity for objection; (D) The term
“including” shall mean and be construed as “including, but not limited to”, unless expressly stated to the contrary; (E) Except as
otherwise set forth herein, for the purposes of this Order “day” means business day and is defined as any day in a work week
excluding Saturday, Sunday and legal holidays where the Purchaser is organized; (F) The invalidity, in whole or in part, of any of the
foregoing articles or paragraphs of this Order, or any part thereof, shall not affect the remainder of such sentences, articles or
paragraphs or any other sentences, article or paragraph of this Order, which shall continue in full force and effect. Further, the parties
agree to give any such article or provision deemed invalid, in whole or in part, a lawful interpretation that most closely re flects the
original intention of Purchaser and Seller; (G) All provisions or obligations contained in this Order, which by their nature or effect are
required or intended to be observed, kept or performed after termination or expiration of an Order will survive and remain binding
upon and for the benefit of the parties, their successors (including without limitation successors by merger) and permitted assigns
including, without limitation, Sections 7, 8, 10, 11, 14, 16, 18, 20 and 21.

Standard Terms and Conditions of Purchase

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Standard Terms and Conditions of Purchase

Uploaded by

Copyright:

Available Formats

Page 1 of 12

STANDARD TERMS AND CONDITIONS OF PURCHASE

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

3. GOVERNING LAW AND DISPUTE RESOLUTION.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

4. ASSIGNMENT, SUBCONTRACTING AND CHANGE IN OWNERSHIP.

5. TRANSPORTATION AND PACKAGING.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

6. DELIVERY AND DELAY.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

11. INDEMNITY AND INSURANCE.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

12. SELLER'S EMPLOYEES

13. WORK ON PURCHASER'S OR ITS CUSTOMER'S PREMISES OR SYSTEMS.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

15. PARTS COMPLIANCE AND MATERIALS TEST CERTIFICATION:

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

18. COMPLIANCE WITH LAWS.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

19. TERMINATION AND SUSPENSION.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

20. PRIVACY AND DATA PROTECTION; PRODUCT CYBERSECURITY.

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

Standard Form-Rev. A: Ver. 1 (Revised May 2020)Wabtec Proprietary and Confidential

You might also like