Bid Number: GEM/2021/B/1702293

Dated: 25-11-2021

Bid Document

Bid Details

Bid End Date/Time 06-12-2021 15:00:00

Bid Opening Date/Time 06-12-2021 15:30:00

Bid Life Cycle (From Publish Date) 90 (Days)

Bid Offer Validity (From End Date) 30 (Days)

Ministry/State Name Uttar Pradesh

Medical Health And Family Welfare Department Uttar

Department Name
Pradesh

Organisation Name N/a

Office Name Cmo Office Deoria

Total Quantity 10796

Item Category SHAGUN KIT (Q3) ()

Minimum Average Annual Turnover of the

11 Lakh (s)
Bidder

OEM Average Turnover (Last 3 Years) 44 Lakh (s)

Years of Past Experience required 3 Year (s)

MSE Exemption for Years of Experience and

No
Turnover

Startup Exemption for Years of Experience

No
and Turnover

Experience Criteria,Past Performance,Bidder

Turnover,Certificate (Requested in ATC),OEM Authorization
Certificate,OEM Annual Turnover,Additional Doc 1
(Requested in ATC),Additional Doc 2 (Requested in
ATC),Additional Doc 3 (Requested in ATC),Additional Doc 4
Document required from seller
(Requested in ATC)
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Past Performance 80 %

Bid to RA enabled No

Time allowed for Technical Clarifications

2 Days
during technical evaluation

Evaluation Method Total value wise evaluation

EMD Detail

Advisory Bank State Bank of India

1/6
 EMD Percentage(%) 2.00

EMD Amount 47502

ePBG Detail

Required No

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy.

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.

Beneficiary:
ACMO STORE
CMO Office Deoria, Medical Health and Family Welfare Department Uttar Pradesh, N/A,
(Sanjay Chand)

Splitting

Bid splitting not applied.

MII Purchase Preference

MII Purchase Preference No

MSE Purchase Preference

MSE Purchase Preference Yes

1. The minimum average annual financial turnover of the bidder during the last three years, ending on 31st
March of the previous financial year, should be as indicated above in the bid document. Documentary evidence in
the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant /
Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the
date of constitution / incorporation of the bidder is less than 3-year-old, the average turnover in respect of the
completed financial years after the date of constitution shall be taken into account for this criteria.
2. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
3. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the relevant period
shall be uploaded with the bid. In case the date of constitution / incorporation of the OEM is less than 3 year old,
the average turnover in respect of the completed financial years after the date of constitution shall be taken into
account for this criteria.
4. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered

2/6
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of
margin of purchase preference /price band defined in relevant policy, such Seller shall be given opportunity to
match L-1 price and contract will be awarded for 25 % percentage of total quantity.
5. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 80% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.

SHAGUN KIT ( 10796 pieces )

Brand Type Unbranded

Technical Specifications

Buyer Specification Document Download

Consignees/Reporting Officer and Quantity

Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer

274001,District Hospital Road

1 Sanjay Chand 10796 15
Deoria

Buyer Added Bid Specific Terms and Conditions

1. Past Project Experience

For fulfilling the experience criteria any one of the following documents may be considered as valid proof
for meeting the experience criteria:
a. Purchase Order copy along with Invoice(s) with self-certification by the bidder that supplies against the
invoices have been executed.
b. Execution certificate by client with order value.
c. Any other document in support of order execution like Third Party Inspection release note, etc.

2. Certificates

Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

3. Certificates

ISO 9001: The bidder or the OEM of the offered products must have ISO 9001 certification.

4. Certificates

Material Test Certificate Should Be Sent Along with The Supply. The Material Will Be Checked by Buyer’s

3/6
 Lab & the Results of the Lab will be the Sole Criteria for Acceptance of the Item.

5. Certificates

The bidder is required to upload, along with the bid, all relevant certificates such as BIS licence, type test
certificate, approval certificates and other certificates as prescribed in the Product Specification given in
the bid document.

6. Certificates

To be eligible for award of contract, Bidder / OEM must possess following Certificates / Test Reports on the
date of bid opening (to be uploaded with bid): TEST REPORT.

7. Turnover

Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last
three years, ending on 31st March of the previous financial year, should be as indicated in the bid
document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a
certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for the
relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
bidder is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria.

8. Turnover

OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product
during the last three years, ending on 31st March of the previous financial year, should be as indicated in
the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant
periods or a certificate from the Chartered Accountant / Cost Accountant indicating the turnover details for
the relevant period shall be uploaded with the bid. In case the date of constitution / incorporation of the
OEM is less than 3 year old, the average turnover in respect of the completed financial years after the
date of constitution shall be taken into account for this criteria. In case of bunch bids, the OEM of
CATEGORY RELATED TO primary product having highest bid value should meet this criterion.

9. Service & Support

Availability of Service Centres: Bidder/OEM must have a Functional Service Centre in the State of each
Consignee's Location in case of carry-in warranty. (Not applicable in case of goods having on-site
warranty). If service center is not already there at the time of bidding, successful bidder / OEM shall have
to establish one within 30 days of award of contract. Payment shall be released only after submission of
documentary evidence of having Functional Service Centre.

10. Service & Support

Dedicated /toll Free Telephone No. for Service Support : BIDDER/OEM must have Dedicated/toll Free
Telephone No. for Service Support.

11. Service & Support

Escalation Matrix For Service Support : Bidder/OEM must provide Escalation Matrix of Telephone Numbers
for Service Support.

12. Generic

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

13. Generic

Bidders shall quote only those products in the bid which are not obsolete in the market and has at least 1
years residual market life i.e. the offered product shall not be declared end-of-life by the OEM before this
period.

4/6
14. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

15. OEM

IMPORTED PRODUCTS: In case of imported products, OEM or Authorized Seller of OEM should have a
registered office in India to provide after sales service support in India. The certificate to this effect should
be submitted.

16. Inspection

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following
Inspection Agency would be conducting inspection of stores before acceptance:
Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been
selected in ATC): 100
Post Receipt Inspection at consignee site before acceptance of stores: TOTAL

17. Inspection

Pre-dispatch inspection at Seller premises (Fee/Charges to be borne by the BUYER): Before

dispatch, the goods will be inspected by Buyer / Consignee or their Authorized Representative or by
Nominated External Inspection Agency (independently or jointly with Buyer or Consignee as decided by
the Buyer) at Seller premises (or at designated place for inspection as declared / communicated by the
seller) for their compliance to the contract specifications. Fee/Charges taken by the External inspection
Agency and any external laboratories testing charges shall be borne by the Buyer. For in-house testing,
the Sellers will provide necessary facilities free of cost. Seller shall notify the Buyer through e-mail about
readiness of goods for pre-dispatch inspection and Buyer will notify the Seller about the Authorized
Representative/ Nominated External Inspection Agency and the date for testing. The goods would be
dispatched to consignee only after clearance in pre-dispatch inspection. Consignee's right of rejection as
per GTC in respect of the goods finally received at his location shall in no way be limited or waived by
reason of the goods having previously been inspected, tested and passed by Buyer/ Consignee or its
Nominated External Inspection Agency prior to the goods' shipment. While bidding, the sellers should take
into account 7 days for inspection from the date of email offering the goods for inspection. Any delay in
inspection beyond 7 days shall be on the part of the buyer and shall be regularised without Liquidated
Damages.
When there is requirement of submission the advance sample, the seller shall inform the buyer promptly
through emails about the date of submission of sample to the buyer nominated Inspection agency.

18. Inspection

Testing of Sample: The testing of advance sample and bulk sample during PDI will be carried at the
designated AHSP labs.When testing facilities are not available, the facilities of Govt labs/NABL/Accredited
labs will be utilized. The testing charges outside the designated AHSP labs to be borne by seller's.

19. Financial Criteria

NET WORTH: Net Worth of the OEM should be positive as per the last audited financial statement.

20. Forms of EMD and PBG

Bidders can also submit the EMD with Banker’s Cheque in favour of PNB payable at PNB.
Bidder has to upload scanned copy / proof of the BC along with bid and has to ensure delivery of hardcopy
to the Buyer within 5 days of Bid End date / Bid Opening date.

21. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also
(besides PBG which is allowed as per GeM GTC). DD should be made in favour of CMO DEORIA payable at
CMO DEORIA. After award of contract, Successful Bidder can upload scanned copy of the DD in place of
PBG and has to ensure delivery of hard copy to the original DD to the Buyer within 15 days of award of

5/6
 contract.

22. Purchase Preference (Centre)

Indian suppliers of this item are not allowed to participate and/ or compete in procurement by some
foreign governments. Bidders / products from such countries are not eligible / not allowed to participate in
this bid in terms of clause 1 (d) of Public Procurement (Preference to Make in India) Order, 2017

23. Purchase Preference (Centre)

Procurement under this bid is reserved for purchase from Micro and Small Enterprises whose credentials
are validated online through Udyog Aadhaar for that product category. If the bidder wants to avail the
reservation benefit, the bidder must be the manufacturer of the offered product in case of bid for supply of
goods. Traders are excluded from the purview of Public Procurement Policy for Micro and Small
Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered Service.
Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service.

24. Purchase Preference (Centre)

Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated
23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent
Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,
the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary
evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If
L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase
preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 1% of total value.

Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome and consequences thereof including any eccentricity / restriction arising in the
bidding process due to these ATCs and due to modification of technical specification and / or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents / clauses
shall also be null and void. If any seller has any objection / grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations.

This Bid is also governed by the General Terms and Conditions

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.

---Thank You---

6/6