This document contains codes and descriptions for stop/exit codes related to an ATU (AutoTrac Assembly Control Unit). The codes indicate issues like the temperature being out of range, invalid GPS or display settings, the steering wheel being moved, and other problems that could prevent the AutoTrac system from functioning properly. Solutions provided for some codes include checking settings, obtaining activation codes, and ensuring the vehicle is traveling in the correct direction.
This document contains codes and descriptions for stop/exit codes related to an ATU (AutoTrac Assembly Control Unit). The codes indicate issues like the temperature being out of range, invalid GPS or display settings, the steering wheel being moved, and other problems that could prevent the AutoTrac system from functioning properly. Solutions provided for some codes include checking settings, obtaining activation codes, and ensuring the vehicle is traveling in the correct direction.
This document contains codes and descriptions for stop/exit codes related to an ATU (AutoTrac Assembly Control Unit). The codes indicate issues like the temperature being out of range, invalid GPS or display settings, the steering wheel being moved, and other problems that could prevent the AutoTrac system from functioning properly. Solutions provided for some codes include checking settings, obtaining activation codes, and ensuring the vehicle is traveling in the correct direction.
This document contains codes and descriptions for stop/exit codes related to an ATU (AutoTrac Assembly Control Unit). The codes indicate issues like the temperature being out of range, invalid GPS or display settings, the steering wheel being moved, and other problems that could prevent the AutoTrac system from functioning properly. Solutions provided for some codes include checking settings, obtaining activation codes, and ensuring the vehicle is traveling in the correct direction.
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 3
Código Nome
Stop/Exit Code ATU Temperature
ATU temperature is out of range. Operating range is (-35˚ to 100˚) C. Stop operation and wait until temperature is between range. If problem persists, call your local GreenStar support number. Stop/Exit Code Acquiring line ATU is active and has acquired the A/B line. Stop/Exit Code AutoTrac Not Enabled ATU is ready-to-enable. It can be enabled by pressing the steer button icon. Stop/Exit Code Heading Error Too Large Vehicle's heading error from A/B line is too large Stop/Exit Code Invalid Display Messages Ensure correct display settings (primary and auxiliary. Stop/Exit Code Invalid Display Settings Go to GreenStar Display 2100/2600 operator's manual OMPC20467 for proper Parallel Tracking setup parameters. Stop/Exit Code Invalid Gear Vehicle's AutoTrac Assembly Control Unit software version requires forward direction for AutoTrac to become active. Also check StarFire settings for forward/backward position. Stop/Exit Code Invalid GPS Signal Check StarFire license versus AutoTrac activation license as well as dual frequency level. Stop/Exit Code Invalid SSU Activation Code Go to stellarsupport.com and obtain activation code for AutoTrac Steering Assembly. Stop/Exit Code Invalid SSU Voltage Repair supply voltage Stop/Exit Code No AutoTrac Activation Go to stellarsupport.com and obtain activation code for GreenStar Display 2100/2600 for AutoTrac Universal. Stop/Exit Code No TCM Corrections Install and enable Terrain Compensation Module. On a StarFire iTC receiver ensure TCM is ON. Stop/Exit Code Off-Track Error Too Large Vehicle's off-track error from A/B line is too large Stop/Exit Code Out of Seat Operator is out of seat while operating AutoTrac for more than specified vehicle set time, or seat switch is faulty. Stop/Exit Code Resume switch error Indicates that built in resume switch or external resume switch is faulty. Stop/Exit Code Reverse Timeout Operating AutoTrac Universal in reverse and/or neutral for more than 45 seconds. Stop/Exit Code Speed Too Fast Vehicle maximum speed is determined by each platform Guidance - AutoTrac Stop/Exit Code Speed Too Slow Vehicle minimum speed is determined by each platform for Guidance - AutoTrac Stop/Exit Code SSU Diagnostic Mode ATU controller is in diagnostic mode. Complete diagnostic mode before attempting AutoTrac Activation. Stop/Exit Code Steering Wheel Moved Steering wheel manually moved which deactivates AutoTrac. Stop/Exit Code Track Number Changed A/B line changed. Establish a new A/B line in Parallel Tracking mode before attempting AutoTrac activation. Stop/Exit Code Tracking on line ATU is active and has acquired the line. Stop/Exit Code Vehicle not traveling in a forward direction vehicle needs to be in forward gear before attempting AutoTrac activation. Stop/Exit Code Unknown direction Drive vehicle forward at a 45 degree angle for 15 seconds. Turn vehicle in a 45 degree angle in an opposite direction for 15 seconds.
