Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Steel Grade: Material Data Sheet

    Uploaded by

    Naveen Hl
    Material details

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Steel Grade: Material Data Sheet

    Uploaded by

    Naveen Hl
    66 views5 pages
    Material details

    Original Title

    S355J2 Material

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Material details

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views5 pages

    Steel Grade: Material Data Sheet

    Uploaded by

    Naveen Hl
    Material details

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Last revised: Thu, 30 Sep 2021 13:41:36 GMT

    Material data sheet


    Steel grade

    All
    S355J2
    General Information

    S355J2 is a micro alloyed structural steel suitable for e.g. mechanical engineering applications. The steel posess a good weldability
    with max CEV =0.47 for all variants. The steel may be delivered with a controlled silicon content for good galvanazing properties. Below,
    a number of closely related variants with various impact strength are presented.

    Variant SB9813 is delivered with a closely controlled C-content for predictable properties and with a CEV value of max 0.41.

    Variant S355J2(M) is a M-treated variant

    Variant S355K2 and S355L4 both show good Impact toughness

    Variant 520M is a M-steel variant of S355J2

    Variant 550M is a drawn or peeled version of S355J2

    M-Steel®
    The basis for the concept is that non-metallic inclusions are modified and controlled with calcium treatment in a
    way to minimize tool wear and to maximize chip control in machining operations.

    Our M-Steel treatment can be applied to any steel grade.

    For further reading about our M-steel concept see our home page.

    For additional Heat Treatment Data, please visit the Heat Treatment Guide

    Similar designations
    ASt 52, A52 FP, Q420q-D, 1501 Gr.224-460, A52 RBII, 1.0577, St52-3

    Chemical composition
    Variant Cast Weldability C% Si % Mn % P% S% Cu %
    CEV 0.43max Min - - - - - -
    S355L4 CC
    Pcm 0.26max Max 0.16 0.55 1.60 0.030 0.030 0.40
    Mechanical Properties
    Dimension Yield strength min Tensile strength Elongation A5 Impact (ISO-V)
    Variant Condition Hardness
    [mm] [MPa] [MPa] [%] strengthmin
    < 16 355** 470-630 22 140-190 HB -40 °C 60 J (long)
    16 < 40 345** 470-630 22 140-190 HB -40 °C 60 J (long)
    S355L4 +AR 40 < 63 335** 470-630 21 140-190 HB -40 °C 60 J (long)
    63 < 80 325** 470-630 20 140-190 HB -40 °C 60 J (long)
    80 < 100 315** 470-630 20 140-190 HB -40 °C 60 J (long)
    Rp0.2 * Reh, ** Re l

    Transformation temperatures
    Temperature °C
    MS 400
    AC1 720
    AC3 815

    Calculation result

    Tempering Diagram (hardness)

    3
    Hardness (Hv)

    0
    0

    Tempering temperature (°C)


    Tempering Diagram (strength)

    3
    Strength (MPa)

    0
    0

    Tempering temperature (°C)


    Jominy

    3
    Hardness (Hv)

    0
    0 10 20 30 40 50

    Depth (mm)
    Other properties (typical values)
    Youngs module (GPa) Poisson´s ratio (-) Shear module (GPa) Density (kg/m3)
    210 0.3 80 7800
    Average CTE 20-300°C Specific heat Thermal conductivity Ambient Electrical resistivityAmbient
    (µm/m°K) capacity 50/100°C (J/kg°K) temperature (W/m°K) temperature (µΩm)
    12 460 - 480 40 - 45 0.20 - 0.25

    Contact us
    Would you like to know more about our offers? Don´t hesitate to contact us:

    Via e-mail: info@ovako.com

    Via telephone: +46 8 622 1300

    For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

    Disclaimer
    The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a
    warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual
    conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before
    using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako
    material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in
    this document.

    You might also like