Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Valve Depth - Inspect: Testing and Adjusting

    Uploaded by

    mk
    Valve Depth - Inspect

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Valve Depth - Inspect: Testing and Adjusting

    Uploaded by

    mk
    27 views3 pages
    Valve Depth - Inspect

    Original Title

    Valve Depth - Inspect

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Valve Depth - Inspect

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views3 pages

    Valve Depth - Inspect: Testing and Adjusting

    Uploaded by

    mk
    Valve Depth - Inspect

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine(M00...

    Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product: WHEEL LOADER


    Model: 950L WHEEL LOADER LXX10325
    Configuration: 950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine

    Testing and Adjusting


    C7.1 Engines for Caterpillar Built Machines
    Media Number -UENR3387-16 Publication Date -01/07/2015 Date Updated -26/09/2017

    i04046712

    Valve Depth - Inspect


    SMCS - 1105-040

    Table 1
    Required Tools
    Tool Part Number Part Description Qty
    A 8T-0455 Liner Projection Tool Group 1

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 17/11/2021
    950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine(M00... Page 2 of 3

    Illustration 1 g01343897
    (1) Dial indicator
    (2) Gauge body
    (3) Gauge block

    1. Use the Tooling (A) to check the depths of the inlet valves and the exhaust valves below the
    face of the cylinder head. Use the gauge block (3) to zero the dial indicator (1).

    2. Ensure that the face of the valves are clean. Ensure that the bottom face of the cylinder head
    is clean. Ensure that the cylinder head is not distorted. Refer to Systems Operation, Testing
    and Adjusting, "Cylinder Head - Inspect" for the procedure to measure flatness of the
    cylinder head.

    Illustration 2 g01343900
    Typical example
    Measurement of the valve depth
    (1) Dial indicator
    (2) Gauge body

    3. Position gauge body (2) and dial indicator (1) in order to measure the valve depth. Measure
    the depth of the inlet valve and the exhaust valve before the valve springs are removed.

    4. For the minimum and maximum limits for a new engine for the inlet valves and the exhaust
    valves, refer to Specifications, "Cylinder Head".

    5. Service wear occurs on an engine which has been in operation. If the valve depth below the
    cylinder head face on a used engine exceeds the specification for service wear, the
    following components must be replaced.

    ◦ Valves

    ◦ Valve inserts

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 17/11/2021
    950L Wheel Loader LXX00001-UP (MACHINE) POWERED BY C7.1 Engine(M00... Page 3 of 3

    For the wear limits for the inlet valves and exhaust valves, refer to Specifications, "Cylinder
    Head".

    6. Check each valve for cracks. Check the stems of the valves for wear. Ensure that the valves
    are the correct fit in the valve guides. Refer to Systems Operation, Testing and Adjusting,
    "Valve Guide - Inspect" for the procedure to inspect the valve guides.

    7. Check the load on the valve springs. Refer to Specifications, "Cylinder Head Valves" for the
    correct lengths and specifications for the valve springs.

    Copyright 1993 - 2021 Caterpillar Inc. Wed Nov 17 16:44:19 UTC+0330 2021
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 17/11/2021

    You might also like