Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Hardness Tester Novotest T Ud2

    Uploaded by

    Rushikesh Joshi
    The NOVOTEST T-UD2 hardness tester measures hardness using both ultrasonic contact impedance (UCI) probes and dynamic Leeb probes. It provides accurate and reliable hardness measurements for a wide range of materials and applications. The portable device is easy to operate, stores measurement data, and works in various field conditions. It offers a cost-effective solution for hardness testing with measurements displayed in standard hardness scales.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hardness Tester Novotest T Ud2

    Uploaded by

    Rushikesh Joshi
    44 views4 pages
    The NOVOTEST T-UD2 hardness tester measures hardness using both ultrasonic contact impedance (UCI) probes and dynamic Leeb probes. It provides accurate and reliable hardness measurements for a wide range of materials and applications. The portable device is easy to operate, stores measurement data, and works in various field conditions. It offers a cost-effective solution for hardness testing with measurements displayed in standard hardness scales.

    Original Title

    Hardness Tester Novotest t Ud2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The NOVOTEST T-UD2 hardness tester measures hardness using both ultrasonic contact impedance (UCI) probes and dynamic Leeb probes. It provides accurate and reliable hardness measurements for a wide range of materials and applications. The portable device is easy to operate, stores measurement data, and works in various field conditions. It offers a cost-effective solution for hardness testing with measurements displayed in standard hardness scales.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views4 pages

    Hardness Tester Novotest T Ud2

    Uploaded by

    Rushikesh Joshi
    The NOVOTEST T-UD2 hardness tester measures hardness using both ultrasonic contact impedance (UCI) probes and dynamic Leeb probes. It provides accurate and reliable hardness measurements for a wide range of materials and applications. The portable device is easy to operate, stores measurement data, and works in various field conditions. It offers a cost-effective solution for hardness testing with measurements displayed in standard hardness scales.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 4

    Combined

    FIRST
    Hardness Tester
    SHOCK-
    NOVOTEST T-UD2
    PROOF
    СOVER

    High-precision, easy in
    operation and reliable with the
    most affordable price in the
    world among the analogues!

    UCI probe Leeb probe

    The advantages of Hardness Tester NOVOTEST T-UD2:


    ✓ hardness measurement of any mass products ✓ convenience and ease of measurement
    with a thickness of 1 mm – inaccessible to ✓ optimized number of buttons
    the dynamic (Leeb) hardness testers (small ✓ contrast display with bright back-lighting
    parts, thin-walled structures, pipes, tanks, ✓ automatic recognition of probe
    steel sheets, articles of complex shape, hard- ✓ indication of the type of connected probe
    ness control of metal coatings, etc.) ✓ calibrations stored in memory of probe
    ✓ small imprint after measuring (mirror surfaces of ✓ very easy in operation and calibration
    shafts necks, blades, gear teeth, etc.) ✓ internal memory and communication
    ✓ measuring the hardness of the surface with PC
    hardened layer ✓ new, intuitive menu with tips on the buttons
    ✓ wide range of hardness ✓ extended temperature range
    ✓ only basic function, nothing extra (frost, down to - 40°C)
    ✓ possibility to use in field conditions with high ✓ water resistant case
    humidity and dust ✓ rubber bumper protected case
    The device works with both ultrasonic contact impedance (UCI)
    and dynamic (Leeb) probes. User get the benefits of two methods
    of measurement – it is the maximum that can be obtained from
    a portable hardness tester.

    Dynamic (Leeb) probe is used for measuring


    the hardness of non-ferrous metals, cast iron,
    coarse-grained materials, massive products etc.

    The ultrasonic contact


    impedance (UCI) probe
    is used for measuring the
    hardness of small items,
    objects with a thin wall, complex form, and to measure the
    hardness of surface hardened layers.

    Can be equipped with three types of UCI probes:


    Load Advantage or benefit Typical applications

    Small forged products, cast materials,


    98N Leaves relatively large dent. Suitable for heat-treated materials, etc.
    low finished surfaces. Surface finish equiv-
    (22.0 lbf) Turbine blades, inside tubes
    alent to 30 grind or better. with ø> 90mm.
    Considered to be the Universal type for Induction or carburized machined parts,
    50N most general applications. e.g.. camshafts, turbines, weld inspec-
    50N of downward hand pressure is re- tion, HAZ. Measurement in grooves,
    (11.2 lbf) quired to activate the probe. Surface finish gear tooth flanks and roots Turbine
    equivalent to 80 grind or better. blades, inside tubes with ø> 90mm.
    Load is easy to apply; provides control to
    test on a sharp radius. Only 10N of down- Ion-nitrided stamping dies and molds,
    10N ward hand pressure is required to activate forms, presses, thin-walled parts
    (2.2 lbf) the probe. Bearings, tooth flanks Turbine blades,
    Surface finish equivalent to 150 grind or inside tubes with ø> 90 mm.
    better.

    Portable hardness tester T-UD2 has modes of measurement:

    Normal mode Statistics mode Smart mode Signal mode


    Sealed housing with rubber protective strips - Hardness testers is ideal for use in workshop
    and field conditions with high humidity, dust, etc. Hardness tester has frost-resistant display
    that allows user to use the device at any season and in any climatic zone of the Earth.

    Combined Hardness Tester NOVOTEST T-UD2 specifications:


    UCI probe types 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N)
    Leeb probe types D, DC, DL, C, D+15, E, G
    Indenter Diamond Indenter (UCI), Hardened ball (Leeb)
    Measuring direction Any direction 360°

    Data storage Limited only by the memory card

    Measurement hardness range:


    - Rockwell, HRC 20 - 70
    - Brinell, HB 90 - 450
    - Vickers, HV 230 - 940
    - temporary resistance (tensile strength), MPa 370 - 1740
    Measuring accuracy HV+ / - 3%; HRC+ / - 1,5%; HB+ / - 3%;
    Hardness scale HRC, HB, HV, MPa
    - UCI probe - pre-calibrated for steel.
    - Leeb probe - pre-calibrated for steel, alloy
    Materials steel, cast iron, stainless steel, aluminum,
    bronze, brass, copper.
    - Additional custom materials for calibration.
    Operating temperature range, °C -20 to +50
    Power supply 2 AA batteries
    Instrument dimensions 120x60x25 mm
    Weight of electronic unit with batteries 0.2 kg (without probes)
    Battery life Not less 20 hours.

    The device has PC software with


    a comfortable and intuitive interface
     Standard set
    of Hardness Tester NOVOTEST T-UD2
    ✓ Electronic unit ✓ 2 batteries AA ✓ Operating manual
    ✓ UCI probe ✓ Charger ✓ Software for PC
    ✓ Leeb probe ✓ USB cable ✓ Case

    Available options for ordering


    of Hardness Tester NOVOTEST T-UD2

    ✓ UCI probe ✓ USB-cable


    ✓ Leeb probe ✓ Set of measures
    ✓ Batteries of hardness
    ✓ Charger ✓ Case

    Application of Hardness Tester


    NOVOTEST T-UD2

    You might also like