Operating Instructions For The Caller ID Card (KX-TA30893) : Advanced Hybrid System
Operating Instructions For The Caller ID Card (KX-TA30893) : Advanced Hybrid System
Operating Instructions For The Caller ID Card (KX-TA30893) : Advanced Hybrid System
KX-TA308
Section 2 Operations
2.1 Proprietary Telephone Settings............................................................ 2-2
Customizing the Buttons on Your Telephone..................................... 2-2
2.2 Telephone Features................................................................................ 2-4
C Call Information/Log, Incoming ........................................................ 2-4
Call Log, Incoming............................................................................. 2-5
E Electronic Station Lockout ................................................................. 2-8
2.3 Display Example.................................................................................... 2-9
2
Section 1
Installation
1.1 Caller ID Card Installation
1. Power off the system, and unplug the AC cord.
Screws
1-2 Installation
1.1 Caller ID Card Installation
6. Attach the Caller ID Card.
Caller ID Card
(for outside (CO)
lines 1 – 3)
Flat cable
• Be sure the frame of the main unit is connected to the ground (☞ Installation Manual,
! 2.5 “Frame Ground Connection”).
Installation 1-3
1.2 System Features
Caller ID
Provides a display proprietary telephone (KX-T7330) user with the caller’s information,
such as the name and telephone number, on the outside (CO) line assigned to receive Caller
ID service.
1-4 Installation
1.2 System Features
No *2
Is your area code assigned?
Yes
No
Does the caller’s number match your area code?
Yes
<No modification>
*3 *4
Removing and adding the number. Removing and adding the number.
*5
Does the reference number match No
a System Speed Dialing number?
Yes
*6
Is the matched System Speed Dialing No
number assigned the name?
Yes
*7
Either the number or the name is displayed. The number is displayed.
Installation 1-5
1.2 System Features
*1: The Caller ID line is assigned in program [900] “Caller ID Assignment”.
*2: Your area code is assigned in program [901] “Caller ID Area Code Assignment”.
*3: The caller’s telephone number is modified according to program [902] “Caller ID Modification
for Local Calls”.
*4: The caller’s telephone number is modified according to program [903] “Caller ID Modification
for Long Distance Calls”.
*5: System Speed Dialing numbers are assigned in program [001] “System Speed Dialing Entry”.
When one of System Speed Dialing numbers includes the reference number, the system regards
them as a match. A line access code (1, 9 or 81 through 86) and/or an account code assigned in
program [310] “Account Codes” in the System Speed Dialing number are disregarded for the
match. The system checks the System Speed Dialing number after a line access code and/or an
account code with the reference number.
*6: Assigning a name to a System Speed Dialing number is in program [011] “System Speed
Dialing Name Setting”.
*7: The user can select the initial display, number or name, by program [904] “Caller ID Log
Priority Selection”. The displayed number is the caller’s telephone number, not the modified
one.
1-6 Installation
1.2 System Features
• A received caller’s telephone number will be printed out only when “With CID” is
! selected in program [906] “Caller ID SMDR Format”.
Installation 1-7
1.3 System Programming [900]-[901]
NEXT or PREV
To continue
SELECT
• The outside (CO) lines, If set to “Enable” in this program, always set the DISA Delayed
! Answer timer to 6 seconds even if “0 sec” or “3 sec” is selected in program [504] “DISA
Delayed Answer Time”.
NEXT or PREV
To continue
SELECT
! • To correct a wrong entry, press the CLEAR button and enter the new one.
1-8 Installation
[902] 1.3 System Programming
Example:
[901]: 201
[902]: Deleted digits – 3 / Added number – Not stored
Caller’s number provided by the Central Office: 2011234567
Logged (modified) number : 1234567
• Program [901] “Caller ID Area Code Assignment” is required for this program.
! • To correct a wrong entry, press the CLEAR button and enter the new one.
Installation 1-9
1.3 System Programming [903]
Example:
[901]: 201
[903]: Deleted digits – 0 (No deletion) / Added number – 1
Caller’s number provided by the Central Office: 7149876543
Logged (modified) number : 17149876543
• Program [901] “Caller ID Area Code Assignment” is required for this program.
! • To correct a wrong entry, press the CLEAR button and enter the new one.
1-10 Installation
[904], [906] 1.3 System Programming
NEXT or PREV
To continue
SELECT
! • This program is available when your Caller ID service provides both the name and number.
If only the number is provided, this program is not necessary.
! • Even if a name is also sent by the Caller ID service, only the number is printed.
Installation 1-11
[910] 1.3 System Programming
NEXT or PREV
To continue
SELECT
• If the reverse signal is sent before the Caller ID signal, select “Enable” in program [424]
! “Reverse (Polarity) Circuit Assignment”.
• We recommend confirming the Caller ID signaling type for each outside (CO) line with a
Telephone Company.
1-12 Installation
1.4 Programming Tables
Installation 1-13
1.4 Programming Tables
1-14 Installation
Section 2
Operations
2.1 Proprietary Telephone Settings
PT
CO AUTO/STORE
6
! • Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, press the PROGRAM button on the KX-T7330.
• After programming, press the PROGRAM button on the KX-T7330.
2-2 Operations
2.1 Proprietary Telephone Settings
Caller ID Selection Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Selection button. The Caller ID
Selection button can be used in the following cases.
1) Confirming a caller’s information while receiving a call or during a conversation
2) Checking the number of logged calls
3) Informing you when no more caller’s information can be logged by lighting the
indicator
PT
CO AUTO/STORE
7
! • Be sure the handset is on the cradle and the SP-PHONE button is off.
• To program, press the PROGRAM button on the KX-T7330.
• After programming, press the PROGRAM button on the KX-T7330.
Operations 2-3
2.2 Telephone Features
During a conversation
JOHN WHITE • Press the Caller ID Selection button to see other information.
The display changes as follows.
JOHN WHITE (caller’s name)
! • The Caller ID Indication button indicator light may turn on when a call is received.
• You can modify and call back the logged numbers. Refer to 2.2 Telephone Features, “Call
Log, Incoming”.
• System Programming determines which is displayed first, the name or number.
• You can program whether to print out a Caller ID number on the SMDR or not by System
Programming.
2-4 Operations
2.2 Telephone Features
PT
7 3 7 1 #
Lift the handset or press Dial 7371. Dial #. Confirmation tone Hang up or press
SP-PHONE. and dial tone SP-PHONE.
PT
7 3 7 0 #
Lift the handset or press Dial 7370. Dial #. Confirmation tone Hang up or press
SP-PHONE. and dial tone SP-PHONE.
Operations 2-5
2.2 Telephone Features
Checking
Display Operation (— for the KX-T7330 only)
When the Caller ID Indication button indicator is red, there are new calls
logged.
1. Press the Caller ID Selection button to confirm the number of
logged calls.
<Example>
If there are 2 unchecked calls and 3 checked calls:
New:02 Old:03
• The above information will be displayed for 3 seconds.
01:0111111111 2. Press the Caller ID Indication button while on-hook to see the
incoming call information.
• The new information that you have not checked will be
displayed first.
02:0924773333 3. You can check another caller’s information by pressing the Caller
ID Indication button again.
After displaying all of the new information, the old information
you have already checked will be displayed.
• To modify the telephone number, use the HOLD button to erase
from the first digit. “0 to 9, , # and PAUSE” can be used to
add numbers from the first digit.
• To clear the displayed information, press the TRANSFER
button.
• To clear all logged call information, go off-hook and press
70 #.
The display shows as follows.
CID Log Clear
• To return to the initial display, go off-hook and on-hook, or wait
for 20 seconds.
• Pressing the Caller ID Selection button provides you with further
information about the party.
The display changes as follows.
<Example>
If the information is stored in log 03,
03:BOB HANKS — caller’s name
2-6 Operations
2.2 Telephone Features
• If “LONG DISTANCE” is displayed, it may be a long distance
call.
• If “PRIVATE” is displayed, the caller chose not to show their
information.
Calling back
Display Operation (— for the KX-T7330 only)
03:0011223344 1. Confirm the number displayed in step 2 or 3 of “Checking” (on the
previous page), and lift the handset or press the SP-PHONE
button.
! PT • When “Disregarding the twenty-first call” has been set and 20 calls are logged, or when
“Overwriting the call log” has been set and all 20 old information has been overwritten, the
Caller ID Selection button indicator lights and informs you that no more calls can be
logged.
Operations 2-7
2.2 Telephone Features
Allows you to lock your extension so that the “Call Log, Incoming” feature is not shown on
the display when you press the Caller ID Indication button, if you do not want others to see
the information. This feature also prevents others from making outside calls from your
extension.
Locking
PT same code
Unlocking
PT
7 7 lock code #
Lift the handset or press Dial 77. Enter the same lock code Dial #. Confirmation tone Hang up or press
SP-PHONE. you used to lock the extension. and dial tone. SP-PHONE.
! PT
PT
• The operator or manager can cancel this feature for all extensions (Electronic Station
Lockout — CANCEL ALL).
• “Remote Station Lock” overrides this feature. If the operator or manager sets Remote
Station Lock on the extension you have already locked, you cannot unlock it.
2-8 Operations
2.3 Display Example
Due to the Multi-lingual Selection Feature, you can select the display in English, Spanish or Portuguese by
System Programming.
The following only displays the English examples.
Operations 2-9
Memo
Kyushu Matsushita Electric Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan