Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 116 views

    Audi A4 (8D) Brake Electronics (Bosch 5

    Uploaded by

    Bilal Abderrahmen ELHABOUCHI

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Audi A4 (8D) Brake Electronics (Bosch 5

    Uploaded by

    Bilal Abderrahmen ELHABOUCHI
    116 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    116 views3 pages

    Audi A4 (8D) Brake Electronics (Bosch 5

    Uploaded by

    Bilal Abderrahmen ELHABOUCHI

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    30/11/2017 Audi A4 (8D) Brake Electronics (Bosch 5.

    3 ABS/EDS/ASR/ESP) - Ross-Tech Wiki

    Skip to content
    Shop Info F.A.Q. Download/Update Manual Upgrades Literature

    Search: Search Go

    Audi A4 (8D) Brake Electronics (Bosch 5.3


    ABS/EDS/ASR/ESP)
    From Ross-Tech Wiki

    (Redirected from VW Passat (3B) Brake Electronics (Bosch 5.3 ABS/EDS/ASR/ESP))

    Contents
    1 Login
    2 Coding
    3 Basic Setting
    3.1 Steering Angle Sensor (G85) Calibration
    3.1.1 Note
    4 Video Link
    4.1 Bosch 5.3 and 5.7 ABS with ESP, Coding

    Login
    Note #1: After Login has been carried out you need to Recode the control module then perform the Steering
    Angle Sensor Calibration. Do NOT exit the Control Module in between the individual steps.
    Note #2: For Audi A8 (4D) always use 4 as Selection for Brakes.
    Note #3: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well
    and/or the 1st Page of the Service Manual.
    Click here to see an Example of a Sticker.

    0?xxx: Chassis
    5 = Audi A8 (4D)
    7 = Audi A6 (4B)
    9 = Audi A4 (8D) / VW Passat (3B)
    0x?xx: Brakes
    3 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
    4 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL]
    5 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
    6 = C54 (Lucas) [PR-1LZ]
    0xx?x: Engine
    5 = 4/6/8 Cyl. Diesel
    7 = 4/5 Cyl. Gasoline
    9 = 6/8/12 Cyl. Gasoline
    0xxx?: Transmission
    3 = Manual with Low Range (only Audi A6 Allroad)
    5 = Manual
    7 = Automatic (01L/01N/01V)

    http://wiki.ross-tech.com/wiki/index.php/VW_Passat_(3B)_Brake_Electronics_(Bosch_5.3_ABS/EDS/ASR/ESP) 1/3
    30/11/2017 Audi A4 (8D) Brake Electronics (Bosch 5.3 ABS/EDS/ASR/ESP) - Ross-Tech Wiki

    9 = Multitronic (01J)

    Coding
    Note #1: Coding is accepted after a specific login has been carried out.
    Note #2: After successful coding the steering angle sensor basic setting needs to be carried out. Do NOT exit
    the Control Module in between the individual steps
    Note #3: For Audi A8 (4D) always use 3 as Selection for Brakes.
    Note #4: The Production Codes (PR-Code) such as 1LX can be found on a Sticker near the Spare Tire Well
    and/or the 1st Page of the Service Manual. Click here to see an Example of a Sticker.
    Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345-123-12345.

    0?xxx: Chassis
    4 = Audi A4 (8D) / VW Passat (3B)
    6 = Audi A6 (4B)
    8 = Audi A8 (4D)
    0x?xx: Brakes
    1 = C54 (Lucas) [PR-1LZ]
    2 = FN3 (Teves/ATE) [PR-1LB/1LE/1LF/1LT/1ZC]
    3 = FN2/HP2 (Dual-Piston) [PR-1LX] & Brembo [PR-1ZL]
    4 = FNRG-60 (Teves/ATE) [PR-1LA/1LG]
    0xx?x: Engine
    5 = 4/6/8 Cyl. Diesel
    7 = 4/5 Cyl. Gasoline
    9 = 6/8/12 Cyl. Gasoline
    0xxx?: Transmission
    3 = Manual with Low Range (only Audi A6 Allroad)
    5 = Manual
    7 = Automatic (01L/01N/01V)
    9 = Multitronic (01J)

    Basic Setting
    Steering Angle Sensor (G85) Calibration

    Before starting the procedure turn the steering wheel at least 30 ° left and back straight ahead.

    [Meas. Blocks - 08]


    Group 005 Field 1 (Steering Angle Sensor -G85-)
    Specification: 0.0 °
    Tolerance (when straight): ±5.0 °
    [Done, Go Back]

    [Login - 11]
    Enter 40168
    [Do It!]

    [Basic Settings - 04]


    Group 001
    [Go!]
    [Done, Go Back]

    http://wiki.ross-tech.com/wiki/index.php/VW_Passat_(3B)_Brake_Electronics_(Bosch_5.3_ABS/EDS/ASR/ESP) 2/3
    30/11/2017 Audi A4 (8D) Brake Electronics (Bosch 5.3 ABS/EDS/ASR/ESP) - Ross-Tech Wiki

    [Fault Codes - 02]


    All fault codes should have disappeared.
    [Done, Go Back]

    Note

    After doing the G85 Calibration, you may get a 01486 - System Function Test Active, this is normal. Please
    see 01486.

    Video Link
    Bosch 5.3 and 5.7 ABS with ESP, Coding

    http://www.youtube.com/watch?v=G7YRiVYrLjo

    Retrieved from "http://wiki.ross-tech.com/wiki/index.php?


    title=Audi_A4_(8D)_Brake_Electronics_(Bosch_5.3_ABS/EDS/ASR/ESP)&oldid=7251"

    Unless otherwise noted, all content on this site is Copyright © 2000-2010 by Ross-Tech LLC. All rights
    reserved.
    "VCDS" is a Registered Trademark of Ross-Tech, LLC.
    Ross-Tech is not affiliated with the Volkswagen Group in any way.

    http://wiki.ross-tech.com/wiki/index.php/VW_Passat_(3B)_Brake_Electronics_(Bosch_5.3_ABS/EDS/ASR/ESP) 3/3

    You might also like