Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

130901-1 Circuit & Networks Gtu 3rd Sem Paper

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Seat No.: _____ Enrolment No.

______

GUJARAT TECHNOLOGICAL UNIVERSITY


B.E. Sem-III Remedial Examination March 2010

Subject code: 130901 Subject ame: Circuit & etworks


Date:10 / 03 /2010 Time: 11.00 am – 01.30 pm
Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.

Q.1 (a) Define Charge, Current, Potential difference, Voltage, Node, Loop and 07
Independent source.
(b) Using source shifting and source transformation find out the voltage Vx in 07
the figure.

.
Figure for 1(b)

Q.2 (a) Explain Substitution theorem. 07


(b) Draw the Thevenin’s equivalent of the circuit shown in figure and find 07
current through load resistance(between terminal bb).

Figure for 2(b)


OR
(b) Find the current in the 5 ohm resistor for the circuit shown in figure using 07
Norton’s theorem.

Figure for 2(b)


Q.3 (a) Explain KCL and KVL using suitable example. 07
(b) Using mesh analysis obtain the current through the 10 V battery for the 07
circuit shown in figure.

1
Figure for 3(b)

OR
Q.3 (a) Explain Millman’s theorem. 07
(b) Find current and voltage drop through 5 ohm resistor in network shown in 07
figure.

Figure for 3(b)

Q.4 (a) Derive expression for rise of current and decay of current in RL series 07
circuit excited by DC voltage source. Discuss the role of time constant in
each.
(b) In figure steady state condition is reached with 100 V DC source . At t=0, 07
switch K is suddenly opened. Find the expression of current through the
inductor. Also find current through the inductor at t=0.5 second.

Figure for 4(b)

OR
Q.4 (a) Draw and explain equivalent circuit of two port network using h- 07
parameters.
(b) Find the Y-parameter for the circuit shown in figure. 07

Figure for 4(b)

Q.5 (a) Derive inter relationship between incidence matrix (A), fundamental tie set
matrix (Bf) and fundamental cut set matrix (Qf). 07

2
(b) For a resistive network shown in figure, draw graph and tree of the 07
network. Also develop the fundamental cut-set matrix.

Figure for 5(b)


OR
Q.5 (a) State the procedure to obtain solution of a network using laplace transform 07
method.State advantage of laplace method over classical method.
(b) What is meant by poles and zeros of a network function? What is the 07
significance of poles and zeros? Discuss the restrictions on locations of
poles and zeros of transfer functions.

*************

You might also like