Formula Book 2009 (3rd Edition)
Formula Book 2009 (3rd Edition)
Formula Book 2009 (3rd Edition)
Quick
Mathematics
Important points and formulas
Third Edition (May 2009)
Content
No. Topic / sub topic Page
1 Natural numbers 1 49 Loci and construction 14
2 Whole Numbers 1 50 Vectors 14
3 Integers 1 51 Column Vectors 15
4 Rational Numbers 1 52 Parallel Vectors 15
5 Irrational Numbers 1 53 Modulus of a Vector 15
6 Terminating Decimals 1 54 MATRICES 15
7 Recurring Decimals 1 55 The Inverse of a Matrix 15
8 Significant figures 1 56 Transformations 16 -17
9 Decimal Places 1 57 Transformation by Matrices 18
10 Standard Form 1 58 STATISTICS 19
11 Conversion Factors 2 59 Probability 20
12 Time 2 60 Symmetry 21
13 Percentages 2
14 Simple Interest 2
15 Compound Interest 2
16 Speed, Distance and Time 3
17 Quadratic Equations 3
18 Expansion of algebraic expressions 3
19 Factorization of algebraic expressions 3
20 Ordering 3
21 Variation 4
22 PYTHAGORAS’ THEOREM 4
23 Area and Perimeter 4
24 Surface Area and Volume 5
25 Angles on a straight line 6
26 Vertically opposite angles 6
27 Different types of triangles 6
28 Parallel Lines 6
29 Types of angles 6
30 Angle properties of triangle 7
31 Congruent Triangles 7
32 Similar Triangles 7
33 Areas of Similar Triangles 8
34 Polygons 8
35 Similar Solids 8
36 CIRCLE 9
37 Chord of a circle 9
38 Tangents to a Circle 10
39 Laws of Indices 10
40 Solving Inequalities 11
41 TRIGONOMETRY 11
42 Bearing 11
43 Cartesian co-ordinates 12
44 Distance – Time Graphs 12
45 Speed – Time Graphs 12
46 Velocity 13
47 Acceleration 13
48 SETS 13
NUMBER Real numbers are made up of all possible
Natural Numbers: Numbers which are used for rational and irrational numbers.
counting purpose are called natural numbers.
An integer is a whole number.
Ex: 1, 2, 3, 4, …………….100, ……………….
Whole Numbers: Natural numbers including 0 are A prime number is divisible only by itself and
called Whole Numbers. by one (1). 1 is not a prime number. It has
Ex: 0, 1, 2, 3, 4, …………………….. only two factors. 1 and the number itself.
Integers: Positive natural numbers, negative natural The exact value of rational number can be
numbers along with 0 are called integers. written down as the ratio of two whole
Ex.: …………………, -4, -3, -2, -1, 0, 1, 2, 3, 4, ……………
numbers.
Rational Numbers: Numbers which are in the form The exact value of an irrational number
𝑝 cannot be written down.
of 𝑞 (q ≠ 0) where p and q are positive or negative
whole numbers are called rational numbers. A square number is the result of multiplying
1 3 −5 49 a number by itself.
Ex: 2 , 4 , 7 , −56 …………………..
Ex: 12, 22, 32, ……………. i.e. 1, 4, 9, ……………..
Irrational Numbers: Numbers like 2 , 𝜋 cannot A cube number is the result of multiplying a
be expressed as rational numbers. Such types of number by itself three times.
numbers are called as irrational numbers. Ex: 13, 23, 33, …………………. i.e. 1, 8, 27,………
Ex: 5 , 17 , …………. The factors of a number are the numbers
which divide exactly into two.
Terminating Decimals
eg. Factors of 36
These are decimal numbers which stop after a
1, 2, 3, 4, 6, 9, 12, 18
certain number of decimal places.
For example,7/8 = 0.875, is a terminating decimal Multiples of a number are the numbers in its
because it stops (terminates) after 3 decimal places. times table.
eg. Multiples of 6 are 6, 12, 18, 24, 30, …
Recurring Decimals
These are decimal numbers which keep repeating a Significant figures;
digit or group of digits; for example Example;
137/259,=0.528 957 528 957 528 957 ...., is a 8064 = 8000 (correct to 1 significant figures)
recurring decimal. The six digits 528957 repeat in 8064 = 8100 (correct to 2 significant figures)
this order. Recurring decimals are written with dots 8064 = 8060 (correct to 3 significant figures)
over the first and last digit of the repeating digits, 0.00508 =0.005 (correct to 1 significant figures)
e.g. 0.528 957 0.00508 = 0.0051 (correct to 2 significant figures)
The order of operations follows the BODMAS 2.00508 = 2.01 (correct to 3 significant figures)
rule:
Decimal Places
Brackets
Example
Powers Of
0.0647 = 0.1 (correct to 1 decimal places)
Divide
0.0647 = 0.06 (correct to 2 decimal places)
Multiply
0.0647 = 0.065 (correct to 3 decimal places)
Add
2.0647 = 2.065 (correct to 3 decimal places)
Subtract
Even numbers: numbers which are divisible Standard Form:
by 2, eg, 2, 4, 6, 8, … The number a x 10n is in standard form when
Odd numbers: numbers which are not 1≤ a < 10 and n is a positive or negative integer.
divisible by 2, eg; 1, 3, 5, 7 … Eg: 2400 = 2.4 x 103
0.0035 = 3.5 x 10-3
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 1 of 21
Conversion Factors:
Mass:
Length: 1 kg = 1000 gm where kg means kilogram
1 km = 1000 m 𝑘𝑚 means kilometer 1 gm = 1000 mgm gm means gram
1 m = 100 cm 𝑚 means meter 1 tonne = 1000 kg mgm means milligram
1 cm = 10 mm 𝑐𝑚 means centimeter
𝑚𝑚 means millimeter Volume:
1 litre = 1000 cm3
1 m3 = 1000 litres
1 kilo litre = 1000 litre
1 dozen = 12
Time:
1 hour = 60 minutes = 3600 1 week = 7 days
seconds 1 leap year = 366 days
1 minute = 60 seconds. 1 light year = 9.46 × 1012 km.
1 day = 24 hours
1 year = 12 months
= 52 weeks
= 365.25 days.
Percentages:
Percent means per hundred.
To express one quantity as a percentage of another, first write the first quantity as a fraction of
the second and then multiply by 100.
Profit = S.P. – C.P.
Loss = C.P. – S.P.
𝑆𝑃−𝐶𝑃
Profit percentage = 𝐶𝑃 × 100
𝐶𝑃−𝑆𝑃
Loss percentage = × 100
𝐶𝑃
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 2 of 21
Speed, Distance and Time:
Distance = speed x time
Units of speed: km/hr, m/sec
𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 Units of distance: km, m
Speed =
𝑡𝑖𝑚𝑒 Units of time: hr, sec
𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒
Time = 5 D
𝑆𝑝𝑒𝑒𝑑 km / hr × = m / sec
18
18 S T
𝑡𝑜𝑡𝑎𝑙 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 m / sec × = km / hr
Average speed = 5
𝑡𝑜𝑡𝑎𝑙 𝑡𝑖𝑚𝑒
ALGEBRA
Quadratic Equations:
An equation in which the highest power of the variable is 2 is called quadratic equation. Thus
ax2 + bx + c = 0 where a, b, c are constants and a ≠ 0 is a general equation.
Solving quadratic equations:
We can solve quadratic equation by method of,
a) Factorization
b) Using the quadratic formula
c) Completing the square
(b)Solution by formula:
The solutions of the quadratic equation
ax2 + bx + c = 0 are given by the formula:
−𝑏± 𝑏 2 −4𝑎𝑐
𝑥 =
2𝑎
(c) Completing the square
Make the coefficient of x2 , i.e. a = 1
Bring the constant term, i.e. c to the right side of equation.
𝑏
Divide coefficient of x, i.e. by 2 and add the square i.e. ( 2)2 to both sides of the equation.
Factorize and simplify answer
Ordering:
= is equal to ≥ is greater than or equal to
≠ is not equal to < is less than
> is greater than ≤ is less than or equal to
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 3 of 21
Variation:
PYTHAGORAS’ THEOREM
For all the right angled triangles “ the square on the hypotenuse is equal to the
sum of the squares on the other two sides”
𝑐 2 = 𝑎2 + 𝑏 2
𝒄 = 𝑎2 + 𝑏 2 𝒃 = 𝑐 2 − 𝑎2 𝒂 = 𝑐 2 − 𝑏2
l
Square a
a a
Area = side × side perimeter = 4 × side
a = a×a =4×a
Parallelogram Area = b × h
perimeter = 2(a + b )
Area = ab sin 𝜃
where a, b are sides and 𝜃 is
the included angle
Triangle
1
Area = × 𝑏𝑎𝑠𝑒 × 𝑒𝑖𝑔𝑡
2
1
Area = 2 𝑎𝑏 𝑠𝑖𝑛 𝐶 perimeter = a + b + c
= 𝑠 𝑠 − 𝑎 𝑠 − 𝑏 (𝑠 − 𝑐)
𝑎+𝑏+𝑐
where s =
2
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 4 of 21
Trapezium
perimeter = Sum of all
1
Area = 2 𝑎 + 𝑏 sides
Circle
r
Area = r2 circumference = 2 r
Semicircle 1 2 1
Area = r perimeter = d + d
r 2 2
Sector 𝑟
Area = r 360 length of an arc = 2 r
2
𝜃 360
Sphere 4 3
Volume = πr
Surface area = 4πr2 3
Pyramid 1
Volume = × base area ×
Base area + area of the shapes in 3
the sides perpendicular height
Cuboid
Cube
Surface area = 6𝑙 2 Volume = 𝑙 3
2 3
Hemisphere Curved surface area = = 2 r2 Volume = r
3
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 5 of 21
GEOMETRY
(a) Angles on a straight line Parallel Lines:
The angles on a straight line add up to 180o. When lines never meet, no matter how far they are
extended, they are said to be parallel.
x + y + z =180o
Triangles
3. A triangle in which one angle is a right angle is called the right angled triangle.
ABC = 90o
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 6 of 21
Angle properties of triangle:
The sum of the angles of a triangle is equal to 180o.
In every triangle, the greatest angle is opposite to the longest side. The smallest angle is
opposite to the shortest side.
Exterior angle is equal to the sum of the opposite interior angles.
x=a+b
Congruent Triangles:
Two triangles are said to be congruent if they are equal in every aspect.
AB = XY a = x
BC = YZ b = y
AC = XZ c = z
Similar Triangles:
If two triangles are similar then they have a pair of corresponding equal angles and the three ratios of
corresponding sides are equal.
AB BC AC
a = x; b = y and c = z = =
XY YZ XZ
If you can show that one of the following conditions is true for two triangles, then the two triangles are
similar.
i) The angles of one triangle are equal to the corresponding angles of the other triangle.
PQ PR QR Q E
If = = then ∆ PQR is similar to ∆ DEF
DE DF EF
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 7 of 21
iii) The ratios of the corresponding sides are equal and the angles between them are equal.
R Z
X Y
P Q
PQ PR
∆ PQR is similar to ∆ XYZ (if, for eg: P = X and = )
XY XZ
area of ABC AB 2 BC 2 AC 2
P Q = = =
A B area of PQR PQ 2 QR 2 PR 2
Polygons:
i) The exterior angles of a polygon add up to 360o.
ii) The sum of the interior angles of a polygon is (𝑛 – 2) × 180o where 𝑛 is the number of sides
of the polygon.
iii) A regular polygon has equal sides and equal angles.
360
iv) If the polygon is regular and has 𝑛 sides, then each exterior angle = 𝑛
v)
3 sides = triangle 4 sides = quadrilateral 5 sides = pentagon
6 sides = hexagon 7 sides = heptagon 8 sides = octagon
9 sides = nonagon 10 sides = decagon
Similar Solids:
If two objects are similar and the ratio of corresponding sides is k, then
the ratio of their areas is 𝑘2.
the ratio of their volumes is 𝑘3.
= 1 = r h
= 12 = 12
r h
= 13 = 13
𝑙2 𝑟2 2 A2 r2 h2 V2 r2 h2
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 8 of 21
CIRCLE
The angle subtended by an arc at the centre is twice the angle subtended at the circumference
The angle in a semi-circle is a right angle. [or if a triangle is inscribed in a semi-circle the angle
opposite the diameter is a right angle]. ∠𝐴𝑃𝐵 = 90°
Opposite angles of a cyclic quadrilateral add up to 180o (supplementary). The corners touch the
circle. A+C = 180o, B+D 180o
The exterior angle of a cyclic quadrilateral is equal to the interior opposite angle.(𝑏 = 𝑝)
Chord of a circle:
A line joining two points on a circle is called a chord.
The area of a circle cut off by a chord is called a segment.
AXB is the minor arc and AYB is the major arc.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 9 of 21
Tangents to a Circle:
The angle between a tangent and the radius drawn to
the point of contact is 90o.
ABO = 900
From any point outside a circle just two tangents to the circle may be drawn and they are of
equal length.
TA = TB
QAB = ACB (p = q)
TC2 = AC × BC
INDICES:
am × an = am + n a
m
am
=
am ÷ an = am – n b bm
(am)n = amn a
n
m
= am / n
a0 = 1
1 a× b = ab
a-n =
an a a
=
m m
(a × b) = a × b m
b b
a 2
= a
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 10 of 21
Solving Inequalities:
When we multiply or divide by a negative number the inequality is reversed.
Eg: 4 > -2
By multiplying by -2 [4(-2) < (-2)(-2) ]
-8 < +4
TRIGONOMETRY
𝑂𝑝𝑝𝑜𝑠𝑖𝑡𝑒 𝑆𝑖𝑑𝑒 𝑂
Sin 𝜃 = =
𝐻𝑦𝑝𝑜𝑡𝑒𝑛𝑢𝑠𝑒 𝐻
Cos 𝜃 =
𝐴𝑑𝑗𝑎𝑐𝑒𝑛𝑡 𝑆𝑖𝑑𝑒
=
𝐴 SOH CAH TOA
𝐻𝑦𝑝𝑜𝑡𝑒𝑛𝑢𝑠𝑒 𝐻
𝑂𝑝𝑝𝑜𝑠𝑖𝑡𝑒 𝑠𝑖𝑑𝑒 𝑂
Tan 𝜃 = =
𝐴𝑑𝑗𝑎𝑐𝑒𝑛𝑡 𝑆𝑖𝑑𝑒 𝐴
Sine Rule:
a b c
= =
sin A sin B sin C
Cosine Rule:
To find the length of a side: To find an angle when all the three sides are
a2 = b2 + c2 - 2bc cosA given:
b2 = a2 + c2 – 2ac cos B
b2 c2 a2
c2 = a2 + b2 – 2ab cos C cos A =
2bc
a c2 b2
2
cos B =
2ac
a b2 c2
2
cos C =
2ab
Bearing
The bearing of a point B from another point A is;
(a) an angle measured from the north at A.
(b) In a clockwise direction.
(c) Written as three-figure number (i.e. from 000 ° to 360°)
Eg: The bearing of B from A is 050° .
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 11 of 21
Cartesian co-ordinates
𝑥 1 +𝑥 2 𝑦 1 +𝑦 2
The midpoint of the line joining two points A( x1 , y1 ) and B( x2 , y2 ) is; 𝑀 = , 2
2
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 12 of 21
Velocity:
Velocity is the rate of change of distance with respect to the time.
Acceleration:
Acceleration is the rate of change of velocity with respect to time.
SETS:
Notations
𝜉 = universal set 𝐴′ = compliment of A (i.e. the elements of
∪ (union) = all the elements 𝜉 - the elements of A)
∩ (intersection) = common elements n(A) = the number of elements in A.
Ø or { } = empty set
∈ = belongs to De Morgan’s Laws: (𝐴 ∪ 𝐵)′ = (𝐴′ ∩ 𝐵 ′ )
∉ = does not belongs to (𝐴 ∩ 𝐵)′ = (𝐴′ ∪ 𝐵 ′ )
⊆ = Subset
or
Complement
Union ∪ The complement of A, written as 𝐴′ refers to
𝐴 ∪ 𝐵 is the set of elements in either A , B or the elements in 𝜀 but not in A.
both A and B.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 13 of 21
Loci and construction
The locus of a point is a set of points satisfying a given set of conditions.
Vectors:
A vector quantity has both magnitude and direction.
a
Vectors a and b represented by the line segments can be added
using the parallelogram rule or the nose- to- tail method.
b
A scalar quantity has a magnitude but no direction. Ordinary numbers are scalars.
The negative sign reverses the direction of the vector.
The result of a – b is a + -b
i.e. subtracting b is equivalent to adding the negative of b.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 14 of 21
Column Vectors:
The top number is the horizontal component and the bottom number is the vertical component
x
y
Parallel Vectors:
Vectors are parallel if they have the same direction. Both components of one vector must be
in the same ratio to the corresponding components of the parallel vector.
a a
In general the vector k is parallel to
b b
Modulus of a Vector:
The modulus of a vector a, is written as a and represents the length (or magnitude) of the vector.
m
In general, if x = , x = (m 2 n 2 )
n
MATRICES:
Multiplication by a Number:
Each element of a matrix is multiplied by the multiplying number.
a b ka kb
k × =
c d kc kd
a b p q ap br aq bs
× =
c d r s cp dr cq ds
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 15 of 21
The Inverse of a Matrix:
a b 1 d b
If A = then A-1 =
c d (ad bc) c a
Transformations:
a) Reflection:
When describing a reflection, the position of the mirror line is essential.
b) Rotation:
To describe a rotation, the centre of rotation, the angle of rotation and the direction of rotation
are required.
A clockwise rotation is negative and an anticlockwise rotation is positive.
>> (angle) (Direction)rotation about (centre)
c) Translation: x
When describing a translation it is necessary to give the translation vector
y
+ x represents movement to the right
- x represents movement to the left
+ y represents movement to the top
- y represents movement to the bottom.
>> Translation by the column vector -----
d) Enlargement:
To describe an enlargement, state;
i. The scale factor, K
ii. The centre of enlargement (the invariant point)
length of the image
Scale factor =
length of the object
>> Enlargement by the scale factor --- centre ------
If K > 0, both the object and the image lie on the same side of the centre of enlargement.
If K < 0, the object and the image lie on opposite side of the centre of enlargement.
If the scale factor lies between 0 and 1, then the resulting image is smaller than the object.
[although the image is smaller than the object, the transformation is still known as an
enlargement]
Area of image = K2 area of object
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 16 of 21
Repeated Transformations:
XT(P) means ‘perform transformation T on P and then perform X on the image.’
XX(P) may be written X2(P).
Inverse Transformations:
The inverse of a transformation is the transformation which takes the image back to the object.
x x
If translation T has a vector , then the translation which ahs the opposite effect has vector .
y y
-1
This is written as T .
If rotation R denotes 90o clockwise rotation about (0, 0), then R-1 denotes 90o anticlockwise rotation
about (0, 0).
For all reflections, the inverse is the same reflection.
Base vectors
1 0
The base vectors are considered as I = and J =
0 1
The columns of a matrix give us the images of I and J after the transformation.
Shear:
𝐷𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑎 𝑝𝑜𝑖𝑛𝑡 𝑚𝑜𝑣𝑒𝑠 𝑑𝑢𝑒 𝑡𝑜 𝑡𝑒 𝑠𝑒𝑎𝑟 𝑎
Shear factor = =
𝑃𝑒𝑎𝑝𝑒𝑛𝑑𝑖𝑐𝑢𝑙𝑎𝑟 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑜𝑓 𝑡𝑒 𝑝𝑜𝑖𝑛𝑡 𝑓𝑟𝑜𝑚 𝑡𝑒 𝑓𝑖𝑥𝑒𝑑 𝑙𝑖𝑛𝑒 𝑏
[The shear factor will be the same calculated from any point on the object with the exception of those
on the invariant line] Area of image = Area of object
Stretch:
To describe a stretch, state;
i. the stretch factor, p
ii. the invariant line,
iii. the direction of the stretch
(always perpendicular to the invariant line)
𝑃𝑒𝑟𝑝𝑒𝑛𝑑𝑖𝑐𝑢𝑙𝑎𝑟 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑜𝑓 𝐶 ′ 𝑓𝑟𝑜𝑚 𝐴𝐵
Scale factor =
𝑃𝑒𝑎𝑝𝑒𝑛𝑑𝑖𝑐𝑢𝑙𝑎𝑟 𝑑𝑖𝑠𝑡𝑎𝑛𝑐𝑒 𝑜𝑓 𝐶 𝑓𝑟𝑜𝑚 𝐴𝐵
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 17 of 21
Transformation by Matrices
Reflection
Matrix Transformation
1 0
Reflection in the x-axis
0 −1
−1 0
Reflection in the y-axis
0 1
0 1
Reflection in the line y = x
1 0
0 −1
Reflection in the line y = - x
−1 0
Rotation
Matrix Angle Direction centre
0 −1
90° anticlockwise (0, 0)
1 0
0 1
90° clockwise (0, 0)
−1 0
−1 0
180° Clockwise/ anticlockwise (0, 0)
0 −1
Enlargement
𝑘 0
where 𝑘= scale factor and centre of enlargement = (0, 0)
0 𝑘
Stretch
Matrix Stretch factor Invariant line Direction
𝑘 0
𝑘 y-axis Parallel to x - axis
0 1
1 0
𝑘 x - axis Parallel to y - axis
0 𝑘
Shear
Matrix Shear factor Invariant line Direction
1 𝑘
𝑘 x-axis Parallel to x - axis
0 1
1 0
𝑘 y - axis Parallel to y - axis
𝑘 1
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 18 of 21
STATISTICS
Bar Graph:
A bar chart makes numerical information easy to see by showing it in a pictorial form.
The width of the bar has no significance. The length of each bar represents the quantity.
Pie Diagram:
The information is displayed using sectors of a circle.
Histograms:
A histogram displays the frequency of either continuous or grouped discrete data in the form of bars.
The bars are joined together.
The bars can be of varying width.
The frequency of the data is represented by the area of the bar and not the height.
[When class intervals are different it is the area of the bar which represents the frequency not the
height]. Instead of frequency being plotted on the vertical axis, frequency density is plotted.
𝑓𝑟𝑒𝑞𝑢𝑒𝑛𝑐𝑦
Frequency density =
𝑐𝑙𝑎𝑠𝑠 𝑤𝑖𝑑𝑡
Mean:
The mean of a series of numbers is obtained by adding the numbers and dividing the result by the
number of numbers.
Mean =
fx where ∑ fx means ‘the sum of the products’
f
i.e. ∑ (number × frequency)
and ∑f means ‘ the sum of the frequencies’.
Median:
The median of a series of numbers is obtained by arranging the numbers in ascending order and then
choosing the number in the ‘middle’. If there are two ‘middle’ numbers the median is the average
(mean) of these two numbers.
Mode:
The mode of a series of numbers is simply the number which occurs most often.
Frequency tables:
A frequency table shows a number x such as a score or a mark, against the frequency f or number of
times that x occurs.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 19 of 21
Cumulative frequency:
Cumulative frequency is the total frequency up to a given point.
A cumulative frequency curve shows the median at the 50 th percentile of the cumulative frequency.
The value at the 25th percentile is known as the lower quartile and that at the 75 th percentile as the
upper quartile.
A measure of the spread or dispersion of the data is given by the inter-quartile range where
inter-quartile range = upper quartile – lower quartile.
Probability:
Probability is the study of chance, or the likelihood of an event happening.
𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑓𝑎𝑣𝑜𝑢𝑟𝑎𝑏𝑙𝑒 𝑜𝑢𝑡𝑐𝑜𝑚𝑒𝑠
Probability of an event =
𝑇𝑜𝑡𝑎𝑙 𝑛𝑢𝑚𝑏𝑒𝑟 𝑜𝑓 𝑒𝑞𝑢𝑎𝑙𝑙𝑦 𝑙𝑖𝑘𝑒𝑙𝑦 𝑜𝑢𝑡𝑐𝑜𝑚 𝑒
If the probability = 0 it implies the event is impossible
If the probability = 1 it implies the event is certain to happen.
All probabilities lie between 0 and 1.
Probabilities are written using fractions or decimals.
Exclusive events:
Two events are exclusive if they cannot occur at the same time.
The OR Rule:
For exclusive events A and B
p(A or B) = p(A) + p(B)
Independent events:
Two events are independent if the occurrence of one even is unaffected by the occurrence of the other.
The AND Rule:
p(A and B) = p(A) × p(B)
where p(A) = probability of A occurring
p(B) = probability of B occurring
Tree diagrams:
A tree diagram is a diagram used to represent probabilities when two or more events are combined.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 20 of 21
Symmetry:
A line of symmetry divides a two-dimensional shape into two congruent (identical) shapes.
A plane of symmetry divides a three-dimensional shape into two congruent solid shapes.
A two-dimensional shape has rotational symmetry if, when rotated about a central point, it fits
its outline. The number of times it fits its outline during a complete revolution is called the order
of rotational symmetry.
Number of Lines Order of Rotational
Shape
of Symmetry Symmetry
Square 4 4
Rectangle 2 2
Parallelogram 0 2
Rhombus 2 2
Trapezium 0 1
Kite 1 1
Equilateral Triangle 3 3
Regular Hexagon 6 6
This book is :
For any inquiry feel free to call to these numbers or mail to the following addresses
Contact: +9609807576 or +9607828455, mail: mohd.hilmy@gmail.com
@ H Dh. Atoll School,+9606520056, mail: hdhatollschool@gmail.com
© All rights reserved by Abu-Yooshau 2009. * Distribute this book freely. NOT FOR SALE.
____________________________________________________________________________________
Mathematics - important points and formulas 2009 mohd.hilmy@gmail.com Page 21 of 21