DPP480 Series: 480W Single Output DIN Rail Mount Power Supplies
DPP480 Series: 480W Single Output DIN Rail Mount Power Supplies
Specifications
Model DPP480-xx-1
AC Input Voltage range VAC 90 - 264VAC, single phase
Input Frequency Hz 47 - 63Hz
DC Input Voltage range VDC 120 - 370VDC*
Inrush Current A 25 / 50A (115 / 230VAC)
Power Factor - Meets EN61000-3-2 Class A
Input Current A 6.9 / 3.3A (115 / 230VAC)
Output Voltage Accuracy % -0, +1% of Nominal
Line Regulation % ±0.5%
Load Regulation % ±1% (±5% when set in parallel mode)
Ripple and Noise (20MHz BW) mV 100mV
Overcurrent Protection (Typ) - 110 - 140%
Overvoltage Protection V See model selector
Overtemperature Protection - -
Hold Up Time (115VAC input) ms > 35ms
Parallel operation - Set in parallel (droop) mode - maximum of 3
LED Indicators - Green LED = On, Red LED = DC Output Low
DC Good Relay (24V model only) - 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V
Operating Temperature °C -40 to +71°C
(Derate linearly 2.5%/°C from 56 to 71°C)
Storage Temperature °C -40 to +85°C
Operating Humidity - 20 - 95% RH (non condensing)
Cooling (1) - Convection
Withstand Voltage - Input to Output 3kVAC for 1 min.
Isolation Resistance - >100M at 25°C & 70%RH, Output to Ground 500VDC
Vibration (Operating) - IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min)
Shock (Operating) - IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face)
Safety Agency Approvals - UL508 Listed, UL60950-1, EN60950-1, CE
Conducted & Radiated EMI - EN55022 class B
Immunity - IEC 61000-4-2, -3, 4, -5, -6. -8, -11
Weight (Typ) g 1800g
Size (LxWxH) mm 116 x 175 x 125mm
Size (LxWxH) in 4.57 x 6.89 x 4.92”
Case material - Metal
Warranty yrs Three years
(1) Recommend 1” clearance on all sides *Safety certified for AC input only
DPP480 Series
Model Selector Terminal Assignments
Adjust. Output Over- # DPP480-xx-1
Model Voltage Range Curr. voltage Eff.
1 DC Good relay
DPP480-24-1 24V 22.5 - 28.5V 20A 30 - 33V 89% 2 DC Good relay
DPP480-48-1 48V 47 - 56V 10A 57 - 63V 90% 3 +V
4 +V
5 -V
Outline Drawing (DPP480-24-1) 6 -V
7 Chassis ground
8 N
9 L
10 No connection
Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15. (no tools required)
Options
Suffix Description
Blank Non detachable connectors
B Detachable input and output connectors